summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intersil/prism54/islpci_dev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/intersil/prism54/islpci_dev.c')
-rw-r--r--drivers/net/wireless/intersil/prism54/islpci_dev.c963
1 files changed, 963 insertions, 0 deletions
diff --git a/drivers/net/wireless/intersil/prism54/islpci_dev.c b/drivers/net/wireless/intersil/prism54/islpci_dev.c
new file mode 100644
index 000000000..1035486b2
--- /dev/null
+++ b/drivers/net/wireless/intersil/prism54/islpci_dev.c
@@ -0,0 +1,963 @@
+/*
+ * Copyright (C) 2002 Intersil Americas Inc.
+ * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
+ * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/hardirq.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/if_arp.h>
+
+#include <asm/io.h>
+
+#include "prismcompat.h"
+#include "isl_38xx.h"
+#include "isl_ioctl.h"
+#include "islpci_dev.h"
+#include "islpci_mgt.h"
+#include "islpci_eth.h"
+#include "oid_mgt.h"
+
+#define ISL3877_IMAGE_FILE "/*(DEBLOBBED)*/"
+#define ISL3886_IMAGE_FILE "/*(DEBLOBBED)*/"
+#define ISL3890_IMAGE_FILE "/*(DEBLOBBED)*/"
+/*(DEBLOBBED)*/
+
+static int prism54_bring_down(islpci_private *);
+static int islpci_alloc_memory(islpci_private *);
+
+/* Temporary dummy MAC address to use until firmware is loaded.
+ * The idea there is that some tools (such as nameif) may query
+ * the MAC address before the netdev is 'open'. By using a valid
+ * OUI prefix, they can process the netdev properly.
+ * Of course, this is not the final/real MAC address. It doesn't
+ * matter, as you are suppose to be able to change it anytime via
+ * ndev->set_mac_address. Jean II */
+static const unsigned char dummy_mac[6] = { 0x00, 0x30, 0xB4, 0x00, 0x00, 0x00 };
+
+static int
+isl_upload_firmware(islpci_private *priv)
+{
+ u32 reg, rc;
+ void __iomem *device_base = priv->device_base;
+
+ /* clear the RAMBoot and the Reset bit */
+ reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
+ reg &= ~ISL38XX_CTRL_STAT_RESET;
+ reg &= ~ISL38XX_CTRL_STAT_RAMBOOT;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* set the Reset bit without reading the register ! */
+ reg |= ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* clear the Reset bit */
+ reg &= ~ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+
+ /* wait a while for the device to reboot */
+ mdelay(50);
+
+ {
+ const struct firmware *fw_entry = NULL;
+ long fw_len;
+ const u32 *fw_ptr;
+
+ rc = reject_firmware(&fw_entry, priv->firmware, PRISM_FW_PDEV);
+ if (rc) {
+ printk(KERN_ERR
+ "%s: reject_firmware() failed for '%s'\n",
+ "prism54", priv->firmware);
+ return rc;
+ }
+ /* prepare the Direct Memory Base register */
+ reg = ISL38XX_DEV_FIRMWARE_ADDRES;
+
+ fw_ptr = (u32 *) fw_entry->data;
+ fw_len = fw_entry->size;
+
+ if (fw_len % 4) {
+ printk(KERN_ERR
+ "%s: firmware '%s' size is not multiple of 32bit, aborting!\n",
+ "prism54", priv->firmware);
+ release_firmware(fw_entry);
+ return -EILSEQ; /* Illegal byte sequence */;
+ }
+
+ while (fw_len > 0) {
+ long _fw_len =
+ (fw_len >
+ ISL38XX_MEMORY_WINDOW_SIZE) ?
+ ISL38XX_MEMORY_WINDOW_SIZE : fw_len;
+ u32 __iomem *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN;
+
+ /* set the card's base address for writing the data */
+ isl38xx_w32_flush(device_base, reg,
+ ISL38XX_DIR_MEM_BASE_REG);
+ wmb(); /* be paranoid */
+
+ /* increment the write address for next iteration */
+ reg += _fw_len;
+ fw_len -= _fw_len;
+
+ /* write the data to the Direct Memory Window 32bit-wise */
+ /* memcpy_toio() doesn't guarantee 32bit writes :-| */
+ while (_fw_len > 0) {
+ /* use non-swapping writel() */
+ __raw_writel(*fw_ptr, dev_fw_ptr);
+ fw_ptr++, dev_fw_ptr++;
+ _fw_len -= 4;
+ }
+
+ /* flush PCI posting */
+ (void) readl(device_base + ISL38XX_PCI_POSTING_FLUSH);
+ wmb(); /* be paranoid again */
+
+ BUG_ON(_fw_len != 0);
+ }
+
+ BUG_ON(fw_len != 0);
+
+ /* Firmware version is at offset 40 (also for "newmac") */
+ printk(KERN_DEBUG "%s: firmware version: %.8s\n",
+ priv->ndev->name, fw_entry->data + 40);
+
+ release_firmware(fw_entry);
+ }
+
+ /* now reset the device
+ * clear the Reset & ClkRun bit, set the RAMBoot bit */
+ reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
+ reg &= ~ISL38XX_CTRL_STAT_CLKRUN;
+ reg &= ~ISL38XX_CTRL_STAT_RESET;
+ reg |= ISL38XX_CTRL_STAT_RAMBOOT;
+ isl38xx_w32_flush(device_base, reg, ISL38XX_CTRL_STAT_REG);
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* set the reset bit latches the host override and RAMBoot bits
+ * into the device for operation when the reset bit is reset */
+ reg |= ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ /* don't do flush PCI posting here! */
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* clear the reset bit should start the whole circus */
+ reg &= ~ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ /* don't do flush PCI posting here! */
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ return 0;
+}
+
+/******************************************************************************
+ Device Interrupt Handler
+******************************************************************************/
+
+irqreturn_t
+islpci_interrupt(int irq, void *config)
+{
+ u32 reg;
+ islpci_private *priv = config;
+ struct net_device *ndev = priv->ndev;
+ void __iomem *device = priv->device_base;
+ int powerstate = ISL38XX_PSM_POWERSAVE_STATE;
+
+ /* lock the interrupt handler */
+ spin_lock(&priv->slock);
+
+ /* received an interrupt request on a shared IRQ line
+ * first check whether the device is in sleep mode */
+ reg = readl(device + ISL38XX_CTRL_STAT_REG);
+ if (reg & ISL38XX_CTRL_STAT_SLEEPMODE)
+ /* device is in sleep mode, IRQ was generated by someone else */
+ {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n");
+#endif
+ spin_unlock(&priv->slock);
+ return IRQ_NONE;
+ }
+
+
+ /* check whether there is any source of interrupt on the device */
+ reg = readl(device + ISL38XX_INT_IDENT_REG);
+
+ /* also check the contents of the Interrupt Enable Register, because this
+ * will filter out interrupt sources from other devices on the same irq ! */
+ reg &= readl(device + ISL38XX_INT_EN_REG);
+ reg &= ISL38XX_INT_SOURCES;
+
+ if (reg != 0) {
+ if (islpci_get_state(priv) != PRV_STATE_SLEEP)
+ powerstate = ISL38XX_PSM_ACTIVE_STATE;
+
+ /* reset the request bits in the Identification register */
+ isl38xx_w32_flush(device, reg, ISL38XX_INT_ACK_REG);
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_FUNCTION_CALLS,
+ "IRQ: Identification register 0x%p 0x%x\n", device, reg);
+#endif
+
+ /* check for each bit in the register separately */
+ if (reg & ISL38XX_INT_IDENT_UPDATE) {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ /* Queue has been updated */
+ DEBUG(SHOW_TRACING, "IRQ: Update flag\n");
+
+ DEBUG(SHOW_QUEUE_INDEXES,
+ "CB drv Qs: [%i][%i][%i][%i][%i][%i]\n",
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[0]),
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[1]),
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[2]),
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[3]),
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[4]),
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[5])
+ );
+
+ DEBUG(SHOW_QUEUE_INDEXES,
+ "CB dev Qs: [%i][%i][%i][%i][%i][%i]\n",
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[0]),
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[1]),
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[2]),
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[3]),
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[4]),
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[5])
+ );
+#endif
+
+ /* cleanup the data low transmit queue */
+ islpci_eth_cleanup_transmit(priv, priv->control_block);
+
+ /* device is in active state, update the
+ * powerstate flag if necessary */
+ powerstate = ISL38XX_PSM_ACTIVE_STATE;
+
+ /* check all three queues in priority order
+ * call the PIMFOR receive function until the
+ * queue is empty */
+ if (isl38xx_in_queue(priv->control_block,
+ ISL38XX_CB_RX_MGMTQ) != 0) {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING,
+ "Received frame in Management Queue\n");
+#endif
+ islpci_mgt_receive(ndev);
+
+ islpci_mgt_cleanup_transmit(ndev);
+
+ /* Refill slots in receive queue */
+ islpci_mgmt_rx_fill(ndev);
+
+ /* no need to trigger the device, next
+ islpci_mgt_transaction does it */
+ }
+
+ while (isl38xx_in_queue(priv->control_block,
+ ISL38XX_CB_RX_DATA_LQ) != 0) {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING,
+ "Received frame in Data Low Queue\n");
+#endif
+ islpci_eth_receive(priv);
+ }
+
+ /* check whether the data transmit queues were full */
+ if (priv->data_low_tx_full) {
+ /* check whether the transmit is not full anymore */
+ if (ISL38XX_CB_TX_QSIZE -
+ isl38xx_in_queue(priv->control_block,
+ ISL38XX_CB_TX_DATA_LQ) >=
+ ISL38XX_MIN_QTHRESHOLD) {
+ /* nope, the driver is ready for more network frames */
+ netif_wake_queue(priv->ndev);
+
+ /* reset the full flag */
+ priv->data_low_tx_full = 0;
+ }
+ }
+ }
+
+ if (reg & ISL38XX_INT_IDENT_INIT) {
+ /* Device has been initialized */
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING,
+ "IRQ: Init flag, device initialized\n");
+#endif
+ wake_up(&priv->reset_done);
+ }
+
+ if (reg & ISL38XX_INT_IDENT_SLEEP) {
+ /* Device intends to move to powersave state */
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "IRQ: Sleep flag\n");
+#endif
+ isl38xx_handle_sleep_request(priv->control_block,
+ &powerstate,
+ priv->device_base);
+ }
+
+ if (reg & ISL38XX_INT_IDENT_WAKEUP) {
+ /* Device has been woken up to active state */
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "IRQ: Wakeup flag\n");
+#endif
+
+ isl38xx_handle_wakeup(priv->control_block,
+ &powerstate, priv->device_base);
+ }
+ } else {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n");
+#endif
+ spin_unlock(&priv->slock);
+ return IRQ_NONE;
+ }
+
+ /* sleep -> ready */
+ if (islpci_get_state(priv) == PRV_STATE_SLEEP
+ && powerstate == ISL38XX_PSM_ACTIVE_STATE)
+ islpci_set_state(priv, PRV_STATE_READY);
+
+ /* !sleep -> sleep */
+ if (islpci_get_state(priv) != PRV_STATE_SLEEP
+ && powerstate == ISL38XX_PSM_POWERSAVE_STATE)
+ islpci_set_state(priv, PRV_STATE_SLEEP);
+
+ /* unlock the interrupt handler */
+ spin_unlock(&priv->slock);
+
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ Network Interface Control & Statistical functions
+******************************************************************************/
+static int
+islpci_open(struct net_device *ndev)
+{
+ u32 rc;
+ islpci_private *priv = netdev_priv(ndev);
+
+ /* reset data structures, upload firmware and reset device */
+ rc = islpci_reset(priv,1);
+ if (rc) {
+ prism54_bring_down(priv);
+ return rc; /* Returns informative message */
+ }
+
+ netif_start_queue(ndev);
+
+ /* Turn off carrier if in STA or Ad-hoc mode. It will be turned on
+ * once the firmware receives a trap of being associated
+ * (GEN_OID_LINKSTATE). In other modes (AP or WDS or monitor) we
+ * should just leave the carrier on as its expected the firmware
+ * won't send us a trigger. */
+ if (priv->iw_mode == IW_MODE_INFRA || priv->iw_mode == IW_MODE_ADHOC)
+ netif_carrier_off(ndev);
+ else
+ netif_carrier_on(ndev);
+
+ return 0;
+}
+
+static int
+islpci_close(struct net_device *ndev)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+ printk(KERN_DEBUG "%s: islpci_close ()\n", ndev->name);
+
+ netif_stop_queue(ndev);
+
+ return prism54_bring_down(priv);
+}
+
+static int
+prism54_bring_down(islpci_private *priv)
+{
+ void __iomem *device_base = priv->device_base;
+ u32 reg;
+ /* we are going to shutdown the device */
+ islpci_set_state(priv, PRV_STATE_PREBOOT);
+
+ /* disable all device interrupts in case they weren't */
+ isl38xx_disable_interrupts(priv->device_base);
+
+ /* For safety reasons, we may want to ensure that no DMA transfer is
+ * currently in progress by emptying the TX and RX queues. */
+
+ /* wait until interrupts have finished executing on other CPUs */
+ synchronize_irq(priv->pdev->irq);
+
+ reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
+ reg &= ~(ISL38XX_CTRL_STAT_RESET | ISL38XX_CTRL_STAT_RAMBOOT);
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ reg |= ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* clear the Reset bit */
+ reg &= ~ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+
+ /* wait a while for the device to reset */
+ schedule_timeout_uninterruptible(msecs_to_jiffies(50));
+
+ return 0;
+}
+
+static int
+islpci_upload_fw(islpci_private *priv)
+{
+ islpci_state_t old_state;
+ u32 rc;
+
+ old_state = islpci_set_state(priv, PRV_STATE_BOOT);
+
+ printk(KERN_DEBUG "%s: uploading firmware...\n", priv->ndev->name);
+
+ rc = isl_upload_firmware(priv);
+ if (rc) {
+ /* error uploading the firmware */
+ printk(KERN_ERR "%s: could not upload firmware ('%s')\n",
+ priv->ndev->name, priv->firmware);
+
+ islpci_set_state(priv, old_state);
+ return rc;
+ }
+
+ printk(KERN_DEBUG "%s: firmware upload complete\n",
+ priv->ndev->name);
+
+ islpci_set_state(priv, PRV_STATE_POSTBOOT);
+
+ return 0;
+}
+
+static int
+islpci_reset_if(islpci_private *priv)
+{
+ long remaining;
+ int result = -ETIME;
+ int count;
+
+ DEFINE_WAIT(wait);
+ prepare_to_wait(&priv->reset_done, &wait, TASK_UNINTERRUPTIBLE);
+
+ /* now the last step is to reset the interface */
+ isl38xx_interface_reset(priv->device_base, priv->device_host_address);
+ islpci_set_state(priv, PRV_STATE_PREINIT);
+
+ for(count = 0; count < 2 && result; count++) {
+ /* The software reset acknowledge needs about 220 msec here.
+ * Be conservative and wait for up to one second. */
+
+ remaining = schedule_timeout_uninterruptible(HZ);
+
+ if(remaining > 0) {
+ result = 0;
+ break;
+ }
+
+ /* If we're here it's because our IRQ hasn't yet gone through.
+ * Retry a bit more...
+ */
+ printk(KERN_ERR "%s: no 'reset complete' IRQ seen - retrying\n",
+ priv->ndev->name);
+ }
+
+ finish_wait(&priv->reset_done, &wait);
+
+ if (result) {
+ printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name);
+ return result;
+ }
+
+ islpci_set_state(priv, PRV_STATE_INIT);
+
+ /* Now that the device is 100% up, let's allow
+ * for the other interrupts --
+ * NOTE: this is not *yet* true since we've only allowed the
+ * INIT interrupt on the IRQ line. We can perhaps poll
+ * the IRQ line until we know for sure the reset went through */
+ isl38xx_enable_common_interrupts(priv->device_base);
+
+ down_write(&priv->mib_sem);
+ result = mgt_commit(priv);
+ if (result) {
+ printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name);
+ up_write(&priv->mib_sem);
+ return result;
+ }
+ up_write(&priv->mib_sem);
+
+ islpci_set_state(priv, PRV_STATE_READY);
+
+ printk(KERN_DEBUG "%s: interface reset complete\n", priv->ndev->name);
+ return 0;
+}
+
+int
+islpci_reset(islpci_private *priv, int reload_firmware)
+{
+ isl38xx_control_block *cb = /* volatile not needed */
+ (isl38xx_control_block *) priv->control_block;
+ unsigned counter;
+ int rc;
+
+ if (reload_firmware)
+ islpci_set_state(priv, PRV_STATE_PREBOOT);
+ else
+ islpci_set_state(priv, PRV_STATE_POSTBOOT);
+
+ printk(KERN_DEBUG "%s: resetting device...\n", priv->ndev->name);
+
+ /* disable all device interrupts in case they weren't */
+ isl38xx_disable_interrupts(priv->device_base);
+
+ /* flush all management queues */
+ priv->index_mgmt_tx = 0;
+ priv->index_mgmt_rx = 0;
+
+ /* clear the indexes in the frame pointer */
+ for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) {
+ cb->driver_curr_frag[counter] = cpu_to_le32(0);
+ cb->device_curr_frag[counter] = cpu_to_le32(0);
+ }
+
+ /* reset the mgmt receive queue */
+ for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) {
+ isl38xx_fragment *frag = &cb->rx_data_mgmt[counter];
+ frag->size = cpu_to_le16(MGMT_FRAME_SIZE);
+ frag->flags = 0;
+ frag->address = cpu_to_le32(priv->mgmt_rx[counter].pci_addr);
+ }
+
+ for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
+ cb->rx_data_low[counter].address =
+ cpu_to_le32((u32) priv->pci_map_rx_address[counter]);
+ }
+
+ /* since the receive queues are filled with empty fragments, now we can
+ * set the corresponding indexes in the Control Block */
+ priv->control_block->driver_curr_frag[ISL38XX_CB_RX_DATA_LQ] =
+ cpu_to_le32(ISL38XX_CB_RX_QSIZE);
+ priv->control_block->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] =
+ cpu_to_le32(ISL38XX_CB_MGMT_QSIZE);
+
+ /* reset the remaining real index registers and full flags */
+ priv->free_data_rx = 0;
+ priv->free_data_tx = 0;
+ priv->data_low_tx_full = 0;
+
+ if (reload_firmware) { /* Should we load the firmware ? */
+ /* now that the data structures are cleaned up, upload
+ * firmware and reset interface */
+ rc = islpci_upload_fw(priv);
+ if (rc) {
+ printk(KERN_ERR "%s: islpci_reset: failure\n",
+ priv->ndev->name);
+ return rc;
+ }
+ }
+
+ /* finally reset interface */
+ rc = islpci_reset_if(priv);
+ if (rc)
+ printk(KERN_ERR "prism54: Your card/socket may be faulty, or IRQ line too busy :(\n");
+ return rc;
+}
+
+/******************************************************************************
+ Network device configuration functions
+******************************************************************************/
+static int
+islpci_alloc_memory(islpci_private *priv)
+{
+ int counter;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ printk(KERN_DEBUG "islpci_alloc_memory\n");
+#endif
+
+ /* remap the PCI device base address to accessible */
+ if (!(priv->device_base =
+ ioremap(pci_resource_start(priv->pdev, 0),
+ ISL38XX_PCI_MEM_SIZE))) {
+ /* error in remapping the PCI device memory address range */
+ printk(KERN_ERR "PCI memory remapping failed\n");
+ return -1;
+ }
+
+ /* memory layout for consistent DMA region:
+ *
+ * Area 1: Control Block for the device interface
+ * Area 2: Power Save Mode Buffer for temporary frame storage. Be aware that
+ * the number of supported stations in the AP determines the minimal
+ * size of the buffer !
+ */
+
+ /* perform the allocation */
+ priv->driver_mem_address = pci_alloc_consistent(priv->pdev,
+ HOST_MEM_BLOCK,
+ &priv->
+ device_host_address);
+
+ if (!priv->driver_mem_address) {
+ /* error allocating the block of PCI memory */
+ printk(KERN_ERR "%s: could not allocate DMA memory, aborting!",
+ "prism54");
+ return -1;
+ }
+
+ /* assign the Control Block to the first address of the allocated area */
+ priv->control_block =
+ (isl38xx_control_block *) priv->driver_mem_address;
+
+ /* set the Power Save Buffer pointer directly behind the CB */
+ priv->device_psm_buffer =
+ priv->device_host_address + CONTROL_BLOCK_SIZE;
+
+ /* make sure all buffer pointers are initialized */
+ for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) {
+ priv->control_block->driver_curr_frag[counter] = cpu_to_le32(0);
+ priv->control_block->device_curr_frag[counter] = cpu_to_le32(0);
+ }
+
+ priv->index_mgmt_rx = 0;
+ memset(priv->mgmt_rx, 0, sizeof(priv->mgmt_rx));
+ memset(priv->mgmt_tx, 0, sizeof(priv->mgmt_tx));
+
+ /* allocate rx queue for management frames */
+ if (islpci_mgmt_rx_fill(priv->ndev) < 0)
+ goto out_free;
+
+ /* now get the data rx skb's */
+ memset(priv->data_low_rx, 0, sizeof (priv->data_low_rx));
+ memset(priv->pci_map_rx_address, 0, sizeof (priv->pci_map_rx_address));
+
+ for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
+ struct sk_buff *skb;
+
+ /* allocate an sk_buff for received data frames storage
+ * each frame on receive size consists of 1 fragment
+ * include any required allignment operations */
+ if (!(skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2))) {
+ /* error allocating an sk_buff structure elements */
+ printk(KERN_ERR "Error allocating skb.\n");
+ skb = NULL;
+ goto out_free;
+ }
+ skb_reserve(skb, (4 - (long) skb->data) & 0x03);
+ /* add the new allocated sk_buff to the buffer array */
+ priv->data_low_rx[counter] = skb;
+
+ /* map the allocated skb data area to pci */
+ priv->pci_map_rx_address[counter] =
+ pci_map_single(priv->pdev, (void *) skb->data,
+ MAX_FRAGMENT_SIZE_RX + 2,
+ PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(priv->pdev,
+ priv->pci_map_rx_address[counter])) {
+ priv->pci_map_rx_address[counter] = 0;
+ /* error mapping the buffer to device
+ accessible memory address */
+ printk(KERN_ERR "failed to map skb DMA'able\n");
+ goto out_free;
+ }
+ }
+
+ prism54_acl_init(&priv->acl);
+ prism54_wpa_bss_ie_init(priv);
+ if (mgt_init(priv))
+ goto out_free;
+
+ return 0;
+ out_free:
+ islpci_free_memory(priv);
+ return -1;
+}
+
+int
+islpci_free_memory(islpci_private *priv)
+{
+ int counter;
+
+ if (priv->device_base)
+ iounmap(priv->device_base);
+ priv->device_base = NULL;
+
+ /* free consistent DMA area... */
+ if (priv->driver_mem_address)
+ pci_free_consistent(priv->pdev, HOST_MEM_BLOCK,
+ priv->driver_mem_address,
+ priv->device_host_address);
+
+ /* clear some dangling pointers */
+ priv->driver_mem_address = NULL;
+ priv->device_host_address = 0;
+ priv->device_psm_buffer = 0;
+ priv->control_block = NULL;
+
+ /* clean up mgmt rx buffers */
+ for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) {
+ struct islpci_membuf *buf = &priv->mgmt_rx[counter];
+ if (buf->pci_addr)
+ pci_unmap_single(priv->pdev, buf->pci_addr,
+ buf->size, PCI_DMA_FROMDEVICE);
+ buf->pci_addr = 0;
+ kfree(buf->mem);
+ buf->size = 0;
+ buf->mem = NULL;
+ }
+
+ /* clean up data rx buffers */
+ for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
+ if (priv->pci_map_rx_address[counter])
+ pci_unmap_single(priv->pdev,
+ priv->pci_map_rx_address[counter],
+ MAX_FRAGMENT_SIZE_RX + 2,
+ PCI_DMA_FROMDEVICE);
+ priv->pci_map_rx_address[counter] = 0;
+
+ if (priv->data_low_rx[counter])
+ dev_kfree_skb(priv->data_low_rx[counter]);
+ priv->data_low_rx[counter] = NULL;
+ }
+
+ /* Free the access control list and the WPA list */
+ prism54_acl_clean(&priv->acl);
+ prism54_wpa_bss_ie_clean(priv);
+ mgt_clean(priv);
+
+ return 0;
+}
+
+#if 0
+static void
+islpci_set_multicast_list(struct net_device *dev)
+{
+ /* put device into promisc mode and let network layer handle it */
+}
+#endif
+
+static void islpci_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+}
+
+static const struct ethtool_ops islpci_ethtool_ops = {
+ .get_drvinfo = islpci_ethtool_get_drvinfo,
+};
+
+static const struct net_device_ops islpci_netdev_ops = {
+ .ndo_open = islpci_open,
+ .ndo_stop = islpci_close,
+ .ndo_start_xmit = islpci_eth_transmit,
+ .ndo_tx_timeout = islpci_eth_tx_timeout,
+ .ndo_set_mac_address = prism54_set_mac_address,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static struct device_type wlan_type = {
+ .name = "wlan",
+};
+
+struct net_device *
+islpci_setup(struct pci_dev *pdev)
+{
+ islpci_private *priv;
+ struct net_device *ndev = alloc_etherdev(sizeof (islpci_private));
+
+ if (!ndev)
+ return ndev;
+
+ pci_set_drvdata(pdev, ndev);
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+ SET_NETDEV_DEVTYPE(ndev, &wlan_type);
+
+ /* setup the structure members */
+ ndev->base_addr = pci_resource_start(pdev, 0);
+ ndev->irq = pdev->irq;
+
+ /* initialize the function pointers */
+ ndev->netdev_ops = &islpci_netdev_ops;
+ ndev->wireless_handlers = &prism54_handler_def;
+ ndev->ethtool_ops = &islpci_ethtool_ops;
+
+ /* ndev->set_multicast_list = &islpci_set_multicast_list; */
+ ndev->addr_len = ETH_ALEN;
+ /* Get a non-zero dummy MAC address for nameif. Jean II */
+ memcpy(ndev->dev_addr, dummy_mac, ETH_ALEN);
+
+ ndev->watchdog_timeo = ISLPCI_TX_TIMEOUT;
+
+ /* allocate a private device structure to the network device */
+ priv = netdev_priv(ndev);
+ priv->ndev = ndev;
+ priv->pdev = pdev;
+ priv->monitor_type = ARPHRD_IEEE80211;
+ priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ?
+ priv->monitor_type : ARPHRD_ETHER;
+
+ /* Add pointers to enable iwspy support. */
+ priv->wireless_data.spy_data = &priv->spy_data;
+ ndev->wireless_data = &priv->wireless_data;
+
+ /* save the start and end address of the PCI memory area */
+ ndev->mem_start = (unsigned long) priv->device_base;
+ ndev->mem_end = ndev->mem_start + ISL38XX_PCI_MEM_SIZE;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "PCI Memory remapped to 0x%p\n", priv->device_base);
+#endif
+
+ init_waitqueue_head(&priv->reset_done);
+
+ /* init the queue read locks, process wait counter */
+ mutex_init(&priv->mgmt_lock);
+ priv->mgmt_received = NULL;
+ init_waitqueue_head(&priv->mgmt_wqueue);
+ mutex_init(&priv->stats_lock);
+ spin_lock_init(&priv->slock);
+
+ /* init state machine with off#1 state */
+ priv->state = PRV_STATE_OFF;
+ priv->state_off = 1;
+
+ /* initialize workqueue's */
+ INIT_WORK(&priv->stats_work, prism54_update_stats);
+ priv->stats_timestamp = 0;
+
+ INIT_WORK(&priv->reset_task, islpci_do_reset_and_wake);
+ priv->reset_task_pending = 0;
+
+ /* allocate various memory areas */
+ if (islpci_alloc_memory(priv))
+ goto do_free_netdev;
+
+ /* select the firmware file depending on the device id */
+ switch (pdev->device) {
+ case 0x3877:
+ strcpy(priv->firmware, ISL3877_IMAGE_FILE);
+ break;
+
+ case 0x3886:
+ strcpy(priv->firmware, ISL3886_IMAGE_FILE);
+ break;
+
+ default:
+ strcpy(priv->firmware, ISL3890_IMAGE_FILE);
+ break;
+ }
+
+ if (register_netdev(ndev)) {
+ DEBUG(SHOW_ERROR_MESSAGES,
+ "ERROR: register_netdev() failed\n");
+ goto do_islpci_free_memory;
+ }
+
+ return ndev;
+
+ do_islpci_free_memory:
+ islpci_free_memory(priv);
+ do_free_netdev:
+ free_netdev(ndev);
+ priv = NULL;
+ return NULL;
+}
+
+islpci_state_t
+islpci_set_state(islpci_private *priv, islpci_state_t new_state)
+{
+ islpci_state_t old_state;
+
+ /* lock */
+ old_state = priv->state;
+
+ /* this means either a race condition or some serious error in
+ * the driver code */
+ switch (new_state) {
+ case PRV_STATE_OFF:
+ priv->state_off++;
+ default:
+ priv->state = new_state;
+ break;
+
+ case PRV_STATE_PREBOOT:
+ /* there are actually many off-states, enumerated by
+ * state_off */
+ if (old_state == PRV_STATE_OFF)
+ priv->state_off--;
+
+ /* only if hw_unavailable is zero now it means we either
+ * were in off#1 state, or came here from
+ * somewhere else */
+ if (!priv->state_off)
+ priv->state = new_state;
+ break;
+ }
+#if 0
+ printk(KERN_DEBUG "%s: state transition %d -> %d (off#%d)\n",
+ priv->ndev->name, old_state, new_state, priv->state_off);
+#endif
+
+ /* invariants */
+ BUG_ON(priv->state_off < 0);
+ BUG_ON(priv->state_off && (priv->state != PRV_STATE_OFF));
+ BUG_ON(!priv->state_off && (priv->state == PRV_STATE_OFF));
+
+ /* unlock */
+ return old_state;
+}