diff options
Diffstat (limited to 'drivers/net/wireless/intersil')
86 files changed, 48262 insertions, 0 deletions
diff --git a/drivers/net/wireless/intersil/Kconfig b/drivers/net/wireless/intersil/Kconfig new file mode 100644 index 000000000..9da136049 --- /dev/null +++ b/drivers/net/wireless/intersil/Kconfig @@ -0,0 +1,38 @@ +config WLAN_VENDOR_INTERSIL + bool "Intersil devices" + default y + ---help--- + If you have a wireless card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about cards. If you say Y, you will be asked for + your specific card in the following questions. + +if WLAN_VENDOR_INTERSIL + +source "drivers/net/wireless/intersil/hostap/Kconfig" +source "drivers/net/wireless/intersil/orinoco/Kconfig" +source "drivers/net/wireless/intersil/p54/Kconfig" + +config PRISM54 + tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)' + depends on PCI + select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV + select FW_LOADER + ---help--- + This enables support for FullMAC PCI/Cardbus prism54 devices. This + driver is now deprecated in favor for the SoftMAC driver, p54pci. + p54pci supports FullMAC PCI/Cardbus devices as well. + + For more information refer to the p54 wiki: + + http://wireless.kernel.org/en/users/Drivers/p54 + + Note: You need a motherboard with DMA support to use any of these cards + + When built as module you get the module prism54 + +endif # WLAN_VENDOR_INTERSIL diff --git a/drivers/net/wireless/intersil/Makefile b/drivers/net/wireless/intersil/Makefile new file mode 100644 index 000000000..9a8cbfee3 --- /dev/null +++ b/drivers/net/wireless/intersil/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_HOSTAP) += hostap/ +obj-$(CONFIG_HERMES) += orinoco/ +obj-$(CONFIG_P54_COMMON) += p54/ +obj-$(CONFIG_PRISM54) += prism54/ diff --git a/drivers/net/wireless/intersil/hostap/Kconfig b/drivers/net/wireless/intersil/hostap/Kconfig new file mode 100644 index 000000000..287d82728 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/Kconfig @@ -0,0 +1,98 @@ +config HOSTAP + tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)" + select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV + select CRYPTO + select CRYPTO_ARC4 + select CRYPTO_ECB + select CRYPTO_AES + select CRYPTO_MICHAEL_MIC + select CRYPTO_ECB + select CRC32 + select LIB80211 + select LIB80211_CRYPT_WEP + select LIB80211_CRYPT_TKIP + select LIB80211_CRYPT_CCMP + ---help--- + Shared driver code for IEEE 802.11b wireless cards based on + Intersil Prism2/2.5/3 chipset. This driver supports so called + Host AP mode that allows the card to act as an IEEE 802.11 + access point. + + See <http://hostap.epitest.fi/> for more information about the + Host AP driver configuration and tools. This site includes + information and tools (hostapd and wpa_supplicant) for WPA/WPA2 + support. + + This option includes the base Host AP driver code that is shared by + different hardware models. You will also need to enable support for + PLX/PCI/CS version of the driver to actually use the driver. + + The driver can be compiled as a module and it will be called + hostap. + +config HOSTAP_FIRMWARE + bool "Support downloading firmware images with Host AP driver" + depends on HOSTAP + ---help--- + Configure Host AP driver to include support for firmware image + download. This option by itself only enables downloading to the + volatile memory, i.e. the card RAM. This option is required to + support cards that don't have firmware in flash, such as D-Link + DWL-520 rev E and D-Link DWL-650 rev P. + + Firmware image downloading needs a user space tool, prism2_srec. + It is available from http://hostap.epitest.fi/. + +config HOSTAP_FIRMWARE_NVRAM + bool "Support for non-volatile firmware download" + depends on HOSTAP_FIRMWARE + ---help--- + Allow Host AP driver to write firmware images to the non-volatile + card memory, i.e. flash memory that survives power cycling. + Enable this option if you want to be able to change card firmware + permanently. + + Firmware image downloading needs a user space tool, prism2_srec. + It is available from http://hostap.epitest.fi/. + +config HOSTAP_PLX + tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors" + depends on PCI && HOSTAP + ---help--- + Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based + PCI adaptors. + + "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this + driver and its help text includes more information about the Host AP + driver. + + The driver can be compiled as a module and will be named + hostap_plx. + +config HOSTAP_PCI + tristate "Host AP driver for Prism2.5 PCI adaptors" + depends on PCI && HOSTAP + ---help--- + Host AP driver's version for Prism2.5 PCI adaptors. + + "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this + driver and its help text includes more information about the Host AP + driver. + + The driver can be compiled as a module and will be named + hostap_pci. + +config HOSTAP_CS + tristate "Host AP driver for Prism2/2.5/3 PC Cards" + depends on PCMCIA && HOSTAP + ---help--- + Host AP driver's version for Prism2/2.5/3 PC Cards. + + "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this + driver and its help text includes more information about the Host AP + driver. + + The driver can be compiled as a module and will be named + hostap_cs. diff --git a/drivers/net/wireless/intersil/hostap/Makefile b/drivers/net/wireless/intersil/hostap/Makefile new file mode 100644 index 000000000..b8e41a702 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/Makefile @@ -0,0 +1,7 @@ +hostap-y := hostap_80211_rx.o hostap_80211_tx.o hostap_ap.o hostap_info.o \ + hostap_ioctl.o hostap_main.o hostap_proc.o +obj-$(CONFIG_HOSTAP) += hostap.o + +obj-$(CONFIG_HOSTAP_CS) += hostap_cs.o +obj-$(CONFIG_HOSTAP_PLX) += hostap_plx.o +obj-$(CONFIG_HOSTAP_PCI) += hostap_pci.o diff --git a/drivers/net/wireless/intersil/hostap/hostap.h b/drivers/net/wireless/intersil/hostap/hostap.h new file mode 100644 index 000000000..ce8721fbc --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap.h @@ -0,0 +1,95 @@ +#ifndef HOSTAP_H +#define HOSTAP_H + +#include <linux/ethtool.h> +#include <linux/kernel.h> + +#include "hostap_wlan.h" +#include "hostap_ap.h" + +static const long freq_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442, + 2447, 2452, 2457, 2462, 2467, 2472, 2484 }; +#define FREQ_COUNT ARRAY_SIZE(freq_list) + +/* hostap.c */ + +extern struct proc_dir_entry *hostap_proc; + +u16 hostap_tx_callback_register(local_info_t *local, + void (*func)(struct sk_buff *, int ok, void *), + void *data); +int hostap_tx_callback_unregister(local_info_t *local, u16 idx); +int hostap_set_word(struct net_device *dev, int rid, u16 val); +int hostap_set_string(struct net_device *dev, int rid, const char *val); +u16 hostap_get_porttype(local_info_t *local); +int hostap_set_encryption(local_info_t *local); +int hostap_set_antsel(local_info_t *local); +int hostap_set_roaming(local_info_t *local); +int hostap_set_auth_algs(local_info_t *local); +void hostap_dump_rx_header(const char *name, + const struct hfa384x_rx_frame *rx); +void hostap_dump_tx_header(const char *name, + const struct hfa384x_tx_frame *tx); +extern const struct header_ops hostap_80211_ops; +int hostap_80211_get_hdrlen(__le16 fc); +struct net_device_stats *hostap_get_stats(struct net_device *dev); +void hostap_setup_dev(struct net_device *dev, local_info_t *local, + int type); +void hostap_set_multicast_list_queue(struct work_struct *work); +int hostap_set_hostapd(local_info_t *local, int val, int rtnl_locked); +int hostap_set_hostapd_sta(local_info_t *local, int val, int rtnl_locked); +void hostap_cleanup(local_info_t *local); +void hostap_cleanup_handler(void *data); +struct net_device * hostap_add_interface(struct local_info *local, + int type, int rtnl_locked, + const char *prefix, const char *name); +void hostap_remove_interface(struct net_device *dev, int rtnl_locked, + int remove_from_list); +int prism2_update_comms_qual(struct net_device *dev); +int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u16 stype, + u8 *body, size_t bodylen); +int prism2_sta_deauth(local_info_t *local, u16 reason); +int prism2_wds_add(local_info_t *local, u8 *remote_addr, + int rtnl_locked); +int prism2_wds_del(local_info_t *local, u8 *remote_addr, + int rtnl_locked, int do_not_remove); + + +/* hostap_ap.c */ + +int ap_control_add_mac(struct mac_restrictions *mac_restrictions, u8 *mac); +int ap_control_del_mac(struct mac_restrictions *mac_restrictions, u8 *mac); +void ap_control_flush_macs(struct mac_restrictions *mac_restrictions); +int ap_control_kick_mac(struct ap_data *ap, struct net_device *dev, u8 *mac); +void ap_control_kickall(struct ap_data *ap); +void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent, + struct lib80211_crypt_data ***crypt); +int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], + struct iw_quality qual[], int buf_size, + int aplist); +int prism2_ap_translate_scan(struct net_device *dev, + struct iw_request_info *info, char *buffer); +int prism2_hostapd(struct ap_data *ap, struct prism2_hostapd_param *param); + + +/* hostap_proc.c */ + +void hostap_init_proc(local_info_t *local); +void hostap_remove_proc(local_info_t *local); + + +/* hostap_info.c */ + +void hostap_info_init(local_info_t *local); +void hostap_info_process(local_info_t *local, struct sk_buff *skb); + + +/* hostap_ioctl.c */ + +extern const struct iw_handler_def hostap_iw_handler_def; +extern const struct ethtool_ops prism2_ethtool_ops; + +int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); + + +#endif /* HOSTAP_H */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_80211.h b/drivers/net/wireless/intersil/hostap/hostap_80211.h new file mode 100644 index 000000000..ed98ce7c8 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_80211.h @@ -0,0 +1,96 @@ +#ifndef HOSTAP_80211_H +#define HOSTAP_80211_H + +#include <linux/types.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> + +struct hostap_ieee80211_mgmt { + __le16 frame_control; + __le16 duration; + u8 da[6]; + u8 sa[6]; + u8 bssid[6]; + __le16 seq_ctrl; + union { + struct { + __le16 auth_alg; + __le16 auth_transaction; + __le16 status_code; + /* possibly followed by Challenge text */ + u8 variable[0]; + } __packed auth; + struct { + __le16 reason_code; + } __packed deauth; + struct { + __le16 capab_info; + __le16 listen_interval; + /* followed by SSID and Supported rates */ + u8 variable[0]; + } __packed assoc_req; + struct { + __le16 capab_info; + __le16 status_code; + __le16 aid; + /* followed by Supported rates */ + u8 variable[0]; + } __packed assoc_resp, reassoc_resp; + struct { + __le16 capab_info; + __le16 listen_interval; + u8 current_ap[6]; + /* followed by SSID and Supported rates */ + u8 variable[0]; + } __packed reassoc_req; + struct { + __le16 reason_code; + } __packed disassoc; + struct { + } __packed probe_req; + struct { + u8 timestamp[8]; + __le16 beacon_int; + __le16 capab_info; + /* followed by some of SSID, Supported rates, + * FH Params, DS Params, CF Params, IBSS Params, TIM */ + u8 variable[0]; + } __packed beacon, probe_resp; + } u; +} __packed; + + +#define IEEE80211_MGMT_HDR_LEN 24 +#define IEEE80211_DATA_HDR3_LEN 24 +#define IEEE80211_DATA_HDR4_LEN 30 + + +struct hostap_80211_rx_status { + u32 mac_time; + u8 signal; + u8 noise; + u16 rate; /* in 100 kbps */ +}; + +/* prism2_rx_80211 'type' argument */ +enum { + PRISM2_RX_MONITOR, PRISM2_RX_MGMT, PRISM2_RX_NON_ASSOC, + PRISM2_RX_NULLFUNC_ACK +}; + +int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, int type); +void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats); +void hostap_dump_rx_80211(const char *name, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats); + +void hostap_dump_tx_80211(const char *name, struct sk_buff *skb); +netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb, + struct net_device *dev); +netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb, + struct net_device *dev); +netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb, + struct net_device *dev); + +#endif /* HOSTAP_80211_H */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_80211_rx.c b/drivers/net/wireless/intersil/hostap/hostap_80211_rx.c new file mode 100644 index 000000000..599f30f22 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_80211_rx.c @@ -0,0 +1,1117 @@ +#include <linux/etherdevice.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <net/lib80211.h> +#include <linux/if_arp.h> + +#include "hostap_80211.h" +#include "hostap.h" +#include "hostap_ap.h" + +/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ +/* Ethernet-II snap header (RFC1042 for most EtherTypes) */ +static unsigned char rfc1042_header[] = +{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; +/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ +static unsigned char bridge_tunnel_header[] = +{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; +/* No encapsulation header if EtherType < 0x600 (=length) */ + +void hostap_dump_rx_80211(const char *name, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct ieee80211_hdr *hdr; + u16 fc; + + hdr = (struct ieee80211_hdr *) skb->data; + + printk(KERN_DEBUG "%s: RX signal=%d noise=%d rate=%d len=%d " + "jiffies=%ld\n", + name, rx_stats->signal, rx_stats->noise, rx_stats->rate, + skb->len, jiffies); + + if (skb->len < 2) + return; + + fc = le16_to_cpu(hdr->frame_control); + printk(KERN_DEBUG " FC=0x%04x (type=%d:%d)%s%s", + fc, (fc & IEEE80211_FCTL_FTYPE) >> 2, + (fc & IEEE80211_FCTL_STYPE) >> 4, + fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", + fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); + + if (skb->len < IEEE80211_DATA_HDR3_LEN) { + printk("\n"); + return; + } + + printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id), + le16_to_cpu(hdr->seq_ctrl)); + + printk(KERN_DEBUG " A1=%pM", hdr->addr1); + printk(" A2=%pM", hdr->addr2); + printk(" A3=%pM", hdr->addr3); + if (skb->len >= 30) + printk(" A4=%pM", hdr->addr4); + printk("\n"); +} + + +/* Send RX frame to netif with 802.11 (and possible prism) header. + * Called from hardware or software IRQ context. */ +int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, int type) +{ + struct hostap_interface *iface; + local_info_t *local; + int hdrlen, phdrlen, head_need, tail_need; + u16 fc; + int prism_header, ret; + struct ieee80211_hdr *fhdr; + + iface = netdev_priv(dev); + local = iface->local; + + if (dev->type == ARPHRD_IEEE80211_PRISM) { + if (local->monitor_type == PRISM2_MONITOR_PRISM) { + prism_header = 1; + phdrlen = sizeof(struct linux_wlan_ng_prism_hdr); + } else { /* local->monitor_type == PRISM2_MONITOR_CAPHDR */ + prism_header = 2; + phdrlen = sizeof(struct linux_wlan_ng_cap_hdr); + } + } else if (dev->type == ARPHRD_IEEE80211_RADIOTAP) { + prism_header = 3; + phdrlen = sizeof(struct hostap_radiotap_rx); + } else { + prism_header = 0; + phdrlen = 0; + } + + fhdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(fhdr->frame_control); + + if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) { + printk(KERN_DEBUG "%s: dropped management frame with header " + "version %d\n", dev->name, fc & IEEE80211_FCTL_VERS); + dev_kfree_skb_any(skb); + return 0; + } + + hdrlen = hostap_80211_get_hdrlen(fhdr->frame_control); + + /* check if there is enough room for extra data; if not, expand skb + * buffer to be large enough for the changes */ + head_need = phdrlen; + tail_need = 0; +#ifdef PRISM2_ADD_BOGUS_CRC + tail_need += 4; +#endif /* PRISM2_ADD_BOGUS_CRC */ + + head_need -= skb_headroom(skb); + tail_need -= skb_tailroom(skb); + + if (head_need > 0 || tail_need > 0) { + if (pskb_expand_head(skb, head_need > 0 ? head_need : 0, + tail_need > 0 ? tail_need : 0, + GFP_ATOMIC)) { + printk(KERN_DEBUG "%s: prism2_rx_80211 failed to " + "reallocate skb buffer\n", dev->name); + dev_kfree_skb_any(skb); + return 0; + } + } + + /* We now have an skb with enough head and tail room, so just insert + * the extra data */ + +#ifdef PRISM2_ADD_BOGUS_CRC + memset(skb_put(skb, 4), 0xff, 4); /* Prism2 strips CRC */ +#endif /* PRISM2_ADD_BOGUS_CRC */ + + if (prism_header == 1) { + struct linux_wlan_ng_prism_hdr *hdr; + hdr = (struct linux_wlan_ng_prism_hdr *) + skb_push(skb, phdrlen); + memset(hdr, 0, phdrlen); + hdr->msgcode = LWNG_CAP_DID_BASE; + hdr->msglen = sizeof(*hdr); + memcpy(hdr->devname, dev->name, sizeof(hdr->devname)); +#define LWNG_SETVAL(f,i,s,l,d) \ +hdr->f.did = LWNG_CAP_DID_BASE | (i << 12); \ +hdr->f.status = s; hdr->f.len = l; hdr->f.data = d + LWNG_SETVAL(hosttime, 1, 0, 4, jiffies); + LWNG_SETVAL(mactime, 2, 0, 4, rx_stats->mac_time); + LWNG_SETVAL(channel, 3, 1 /* no value */, 4, 0); + LWNG_SETVAL(rssi, 4, 1 /* no value */, 4, 0); + LWNG_SETVAL(sq, 5, 1 /* no value */, 4, 0); + LWNG_SETVAL(signal, 6, 0, 4, rx_stats->signal); + LWNG_SETVAL(noise, 7, 0, 4, rx_stats->noise); + LWNG_SETVAL(rate, 8, 0, 4, rx_stats->rate / 5); + LWNG_SETVAL(istx, 9, 0, 4, 0); + LWNG_SETVAL(frmlen, 10, 0, 4, skb->len - phdrlen); +#undef LWNG_SETVAL + } else if (prism_header == 2) { + struct linux_wlan_ng_cap_hdr *hdr; + hdr = (struct linux_wlan_ng_cap_hdr *) + skb_push(skb, phdrlen); + memset(hdr, 0, phdrlen); + hdr->version = htonl(LWNG_CAPHDR_VERSION); + hdr->length = htonl(phdrlen); + hdr->mactime = __cpu_to_be64(rx_stats->mac_time); + hdr->hosttime = __cpu_to_be64(jiffies); + hdr->phytype = htonl(4); /* dss_dot11_b */ + hdr->channel = htonl(local->channel); + hdr->datarate = htonl(rx_stats->rate); + hdr->antenna = htonl(0); /* unknown */ + hdr->priority = htonl(0); /* unknown */ + hdr->ssi_type = htonl(3); /* raw */ + hdr->ssi_signal = htonl(rx_stats->signal); + hdr->ssi_noise = htonl(rx_stats->noise); + hdr->preamble = htonl(0); /* unknown */ + hdr->encoding = htonl(1); /* cck */ + } else if (prism_header == 3) { + struct hostap_radiotap_rx *hdr; + hdr = (struct hostap_radiotap_rx *)skb_push(skb, phdrlen); + memset(hdr, 0, phdrlen); + hdr->hdr.it_len = cpu_to_le16(phdrlen); + hdr->hdr.it_present = + cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT) | + (1 << IEEE80211_RADIOTAP_CHANNEL) | + (1 << IEEE80211_RADIOTAP_RATE) | + (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | + (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE)); + hdr->tsft = cpu_to_le64(rx_stats->mac_time); + hdr->chan_freq = cpu_to_le16(freq_list[local->channel - 1]); + hdr->chan_flags = cpu_to_le16(IEEE80211_CHAN_CCK | + IEEE80211_CHAN_2GHZ); + hdr->rate = rx_stats->rate / 5; + hdr->dbm_antsignal = rx_stats->signal; + hdr->dbm_antnoise = rx_stats->noise; + } + + ret = skb->len - phdrlen; + skb->dev = dev; + skb_reset_mac_header(skb); + skb_pull(skb, hdrlen); + if (prism_header) + skb_pull(skb, phdrlen); + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = cpu_to_be16(ETH_P_802_2); + memset(skb->cb, 0, sizeof(skb->cb)); + netif_rx(skb); + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +static void monitor_rx(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + int len; + + len = prism2_rx_80211(dev, skb, rx_stats, PRISM2_RX_MONITOR); + dev->stats.rx_packets++; + dev->stats.rx_bytes += len; +} + + +/* Called only as a tasklet (software IRQ) */ +static struct prism2_frag_entry * +prism2_frag_cache_find(local_info_t *local, unsigned int seq, + unsigned int frag, u8 *src, u8 *dst) +{ + struct prism2_frag_entry *entry; + int i; + + for (i = 0; i < PRISM2_FRAG_CACHE_LEN; i++) { + entry = &local->frag_cache[i]; + if (entry->skb != NULL && + time_after(jiffies, entry->first_frag_time + 2 * HZ)) { + printk(KERN_DEBUG "%s: expiring fragment cache entry " + "seq=%u last_frag=%u\n", + local->dev->name, entry->seq, entry->last_frag); + dev_kfree_skb(entry->skb); + entry->skb = NULL; + } + + if (entry->skb != NULL && entry->seq == seq && + (entry->last_frag + 1 == frag || frag == -1) && + memcmp(entry->src_addr, src, ETH_ALEN) == 0 && + memcmp(entry->dst_addr, dst, ETH_ALEN) == 0) + return entry; + } + + return NULL; +} + + +/* Called only as a tasklet (software IRQ) */ +static struct sk_buff * +prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr *hdr) +{ + struct sk_buff *skb = NULL; + u16 sc; + unsigned int frag, seq; + struct prism2_frag_entry *entry; + + sc = le16_to_cpu(hdr->seq_ctrl); + frag = sc & IEEE80211_SCTL_FRAG; + seq = (sc & IEEE80211_SCTL_SEQ) >> 4; + + if (frag == 0) { + /* Reserve enough space to fit maximum frame length */ + skb = dev_alloc_skb(local->dev->mtu + + sizeof(struct ieee80211_hdr) + + 8 /* LLC */ + + 2 /* alignment */ + + 8 /* WEP */ + ETH_ALEN /* WDS */); + if (skb == NULL) + return NULL; + + entry = &local->frag_cache[local->frag_next_idx]; + local->frag_next_idx++; + if (local->frag_next_idx >= PRISM2_FRAG_CACHE_LEN) + local->frag_next_idx = 0; + + if (entry->skb != NULL) + dev_kfree_skb(entry->skb); + + entry->first_frag_time = jiffies; + entry->seq = seq; + entry->last_frag = frag; + entry->skb = skb; + memcpy(entry->src_addr, hdr->addr2, ETH_ALEN); + memcpy(entry->dst_addr, hdr->addr1, ETH_ALEN); + } else { + /* received a fragment of a frame for which the head fragment + * should have already been received */ + entry = prism2_frag_cache_find(local, seq, frag, hdr->addr2, + hdr->addr1); + if (entry != NULL) { + entry->last_frag = frag; + skb = entry->skb; + } + } + + return skb; +} + + +/* Called only as a tasklet (software IRQ) */ +static int prism2_frag_cache_invalidate(local_info_t *local, + struct ieee80211_hdr *hdr) +{ + u16 sc; + unsigned int seq; + struct prism2_frag_entry *entry; + + sc = le16_to_cpu(hdr->seq_ctrl); + seq = (sc & IEEE80211_SCTL_SEQ) >> 4; + + entry = prism2_frag_cache_find(local, seq, -1, hdr->addr2, hdr->addr1); + + if (entry == NULL) { + printk(KERN_DEBUG "%s: could not invalidate fragment cache " + "entry (seq=%u)\n", + local->dev->name, seq); + return -1; + } + + entry->skb = NULL; + return 0; +} + + +static struct hostap_bss_info *__hostap_get_bss(local_info_t *local, u8 *bssid, + u8 *ssid, size_t ssid_len) +{ + struct list_head *ptr; + struct hostap_bss_info *bss; + + list_for_each(ptr, &local->bss_list) { + bss = list_entry(ptr, struct hostap_bss_info, list); + if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0 && + (ssid == NULL || + (ssid_len == bss->ssid_len && + memcmp(ssid, bss->ssid, ssid_len) == 0))) { + list_move(&bss->list, &local->bss_list); + return bss; + } + } + + return NULL; +} + + +static struct hostap_bss_info *__hostap_add_bss(local_info_t *local, u8 *bssid, + u8 *ssid, size_t ssid_len) +{ + struct hostap_bss_info *bss; + + if (local->num_bss_info >= HOSTAP_MAX_BSS_COUNT) { + bss = list_entry(local->bss_list.prev, + struct hostap_bss_info, list); + list_del(&bss->list); + local->num_bss_info--; + } else { + bss = kmalloc(sizeof(*bss), GFP_ATOMIC); + if (bss == NULL) + return NULL; + } + + memset(bss, 0, sizeof(*bss)); + memcpy(bss->bssid, bssid, ETH_ALEN); + memcpy(bss->ssid, ssid, ssid_len); + bss->ssid_len = ssid_len; + local->num_bss_info++; + list_add(&bss->list, &local->bss_list); + return bss; +} + + +static void __hostap_expire_bss(local_info_t *local) +{ + struct hostap_bss_info *bss; + + while (local->num_bss_info > 0) { + bss = list_entry(local->bss_list.prev, + struct hostap_bss_info, list); + if (!time_after(jiffies, bss->last_update + 60 * HZ)) + break; + + list_del(&bss->list); + local->num_bss_info--; + kfree(bss); + } +} + + +/* Both IEEE 802.11 Beacon and Probe Response frames have similar structure, so + * the same routine can be used to parse both of them. */ +static void hostap_rx_sta_beacon(local_info_t *local, struct sk_buff *skb, + int stype) +{ + struct hostap_ieee80211_mgmt *mgmt; + int left, chan = 0; + u8 *pos; + u8 *ssid = NULL, *wpa = NULL, *rsn = NULL; + size_t ssid_len = 0, wpa_len = 0, rsn_len = 0; + struct hostap_bss_info *bss; + + if (skb->len < IEEE80211_MGMT_HDR_LEN + sizeof(mgmt->u.beacon)) + return; + + mgmt = (struct hostap_ieee80211_mgmt *) skb->data; + pos = mgmt->u.beacon.variable; + left = skb->len - (pos - skb->data); + + while (left >= 2) { + if (2 + pos[1] > left) + return; /* parse failed */ + switch (*pos) { + case WLAN_EID_SSID: + ssid = pos + 2; + ssid_len = pos[1]; + break; + case WLAN_EID_VENDOR_SPECIFIC: + if (pos[1] >= 4 && + pos[2] == 0x00 && pos[3] == 0x50 && + pos[4] == 0xf2 && pos[5] == 1) { + wpa = pos; + wpa_len = pos[1] + 2; + } + break; + case WLAN_EID_RSN: + rsn = pos; + rsn_len = pos[1] + 2; + break; + case WLAN_EID_DS_PARAMS: + if (pos[1] >= 1) + chan = pos[2]; + break; + } + left -= 2 + pos[1]; + pos += 2 + pos[1]; + } + + if (wpa_len > MAX_WPA_IE_LEN) + wpa_len = MAX_WPA_IE_LEN; + if (rsn_len > MAX_WPA_IE_LEN) + rsn_len = MAX_WPA_IE_LEN; + if (ssid_len > sizeof(bss->ssid)) + ssid_len = sizeof(bss->ssid); + + spin_lock(&local->lock); + bss = __hostap_get_bss(local, mgmt->bssid, ssid, ssid_len); + if (bss == NULL) + bss = __hostap_add_bss(local, mgmt->bssid, ssid, ssid_len); + if (bss) { + bss->last_update = jiffies; + bss->count++; + bss->capab_info = le16_to_cpu(mgmt->u.beacon.capab_info); + if (wpa) { + memcpy(bss->wpa_ie, wpa, wpa_len); + bss->wpa_ie_len = wpa_len; + } else + bss->wpa_ie_len = 0; + if (rsn) { + memcpy(bss->rsn_ie, rsn, rsn_len); + bss->rsn_ie_len = rsn_len; + } else + bss->rsn_ie_len = 0; + bss->chan = chan; + } + __hostap_expire_bss(local); + spin_unlock(&local->lock); +} + + +static int +hostap_rx_frame_mgmt(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, u16 type, + u16 stype) +{ + if (local->iw_mode == IW_MODE_MASTER) + hostap_update_sta_ps(local, (struct ieee80211_hdr *) skb->data); + + if (local->hostapd && type == IEEE80211_FTYPE_MGMT) { + if (stype == IEEE80211_STYPE_BEACON && + local->iw_mode == IW_MODE_MASTER) { + struct sk_buff *skb2; + /* Process beacon frames also in kernel driver to + * update STA(AP) table statistics */ + skb2 = skb_clone(skb, GFP_ATOMIC); + if (skb2) + hostap_rx(skb2->dev, skb2, rx_stats); + } + + /* send management frames to the user space daemon for + * processing */ + local->apdevstats.rx_packets++; + local->apdevstats.rx_bytes += skb->len; + if (local->apdev == NULL) + return -1; + prism2_rx_80211(local->apdev, skb, rx_stats, PRISM2_RX_MGMT); + return 0; + } + + if (local->iw_mode == IW_MODE_MASTER) { + if (type != IEEE80211_FTYPE_MGMT && + type != IEEE80211_FTYPE_CTL) { + printk(KERN_DEBUG "%s: unknown management frame " + "(type=0x%02x, stype=0x%02x) dropped\n", + skb->dev->name, type >> 2, stype >> 4); + return -1; + } + + hostap_rx(skb->dev, skb, rx_stats); + return 0; + } else if (type == IEEE80211_FTYPE_MGMT && + (stype == IEEE80211_STYPE_BEACON || + stype == IEEE80211_STYPE_PROBE_RESP)) { + hostap_rx_sta_beacon(local, skb, stype); + return -1; + } else if (type == IEEE80211_FTYPE_MGMT && + (stype == IEEE80211_STYPE_ASSOC_RESP || + stype == IEEE80211_STYPE_REASSOC_RESP)) { + /* Ignore (Re)AssocResp silently since these are not currently + * needed but are still received when WPA/RSN mode is enabled. + */ + return -1; + } else { + printk(KERN_DEBUG "%s: hostap_rx_frame_mgmt: dropped unhandled" + " management frame in non-Host AP mode (type=%d:%d)\n", + skb->dev->name, type >> 2, stype >> 4); + return -1; + } +} + + +/* Called only as a tasklet (software IRQ) */ +static struct net_device *prism2_rx_get_wds(local_info_t *local, + u8 *addr) +{ + struct hostap_interface *iface = NULL; + struct list_head *ptr; + + read_lock_bh(&local->iface_lock); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type == HOSTAP_INTERFACE_WDS && + memcmp(iface->u.wds.remote_addr, addr, ETH_ALEN) == 0) + break; + iface = NULL; + } + read_unlock_bh(&local->iface_lock); + + return iface ? iface->dev : NULL; +} + + +static int +hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr *hdr, u16 fc, + struct net_device **wds) +{ + /* FIX: is this really supposed to accept WDS frames only in Master + * mode? What about Repeater or Managed with WDS frames? */ + if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) != + (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS) && + (local->iw_mode != IW_MODE_MASTER || !(fc & IEEE80211_FCTL_TODS))) + return 0; /* not a WDS frame */ + + /* Possible WDS frame: either IEEE 802.11 compliant (if FromDS) + * or own non-standard frame with 4th address after payload */ + if (!ether_addr_equal(hdr->addr1, local->dev->dev_addr) && + (hdr->addr1[0] != 0xff || hdr->addr1[1] != 0xff || + hdr->addr1[2] != 0xff || hdr->addr1[3] != 0xff || + hdr->addr1[4] != 0xff || hdr->addr1[5] != 0xff)) { + /* RA (or BSSID) is not ours - drop */ + PDEBUG(DEBUG_EXTRA2, "%s: received WDS frame with " + "not own or broadcast %s=%pM\n", + local->dev->name, + fc & IEEE80211_FCTL_FROMDS ? "RA" : "BSSID", + hdr->addr1); + return -1; + } + + /* check if the frame came from a registered WDS connection */ + *wds = prism2_rx_get_wds(local, hdr->addr2); + if (*wds == NULL && fc & IEEE80211_FCTL_FROMDS && + (local->iw_mode != IW_MODE_INFRA || + !(local->wds_type & HOSTAP_WDS_AP_CLIENT) || + memcmp(hdr->addr2, local->bssid, ETH_ALEN) != 0)) { + /* require that WDS link has been registered with TA or the + * frame is from current AP when using 'AP client mode' */ + PDEBUG(DEBUG_EXTRA, "%s: received WDS[4 addr] frame " + "from unknown TA=%pM\n", + local->dev->name, hdr->addr2); + if (local->ap && local->ap->autom_ap_wds) + hostap_wds_link_oper(local, hdr->addr2, WDS_ADD); + return -1; + } + + if (*wds && !(fc & IEEE80211_FCTL_FROMDS) && local->ap && + hostap_is_sta_assoc(local->ap, hdr->addr2)) { + /* STA is actually associated with us even though it has a + * registered WDS link. Assume it is in 'AP client' mode. + * Since this is a 3-addr frame, assume it is not (bogus) WDS + * frame and process it like any normal ToDS frame from + * associated STA. */ + *wds = NULL; + } + + return 0; +} + + +static int hostap_is_eapol_frame(local_info_t *local, struct sk_buff *skb) +{ + struct net_device *dev = local->dev; + u16 fc, ethertype; + struct ieee80211_hdr *hdr; + u8 *pos; + + if (skb->len < 24) + return 0; + + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_control); + + /* check that the frame is unicast frame to us */ + if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == + IEEE80211_FCTL_TODS && + ether_addr_equal(hdr->addr1, dev->dev_addr) && + ether_addr_equal(hdr->addr3, dev->dev_addr)) { + /* ToDS frame with own addr BSSID and DA */ + } else if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == + IEEE80211_FCTL_FROMDS && + ether_addr_equal(hdr->addr1, dev->dev_addr)) { + /* FromDS frame with own addr as DA */ + } else + return 0; + + if (skb->len < 24 + 8) + return 0; + + /* check for port access entity Ethernet type */ + pos = skb->data + 24; + ethertype = (pos[6] << 8) | pos[7]; + if (ethertype == ETH_P_PAE) + return 1; + + return 0; +} + + +/* Called only as a tasklet (software IRQ) */ +static int +hostap_rx_frame_decrypt(local_info_t *local, struct sk_buff *skb, + struct lib80211_crypt_data *crypt) +{ + struct ieee80211_hdr *hdr; + int res, hdrlen; + + if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL) + return 0; + + hdr = (struct ieee80211_hdr *) skb->data; + hdrlen = hostap_80211_get_hdrlen(hdr->frame_control); + + if (local->tkip_countermeasures && + strcmp(crypt->ops->name, "TKIP") == 0) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " + "received packet from %pM\n", + local->dev->name, hdr->addr2); + } + return -1; + } + + atomic_inc(&crypt->refcnt); + res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv); + atomic_dec(&crypt->refcnt); + if (res < 0) { + printk(KERN_DEBUG "%s: decryption failed (SA=%pM) res=%d\n", + local->dev->name, hdr->addr2, res); + local->comm_tallies.rx_discards_wep_undecryptable++; + return -1; + } + + return res; +} + + +/* Called only as a tasklet (software IRQ) */ +static int +hostap_rx_frame_decrypt_msdu(local_info_t *local, struct sk_buff *skb, + int keyidx, struct lib80211_crypt_data *crypt) +{ + struct ieee80211_hdr *hdr; + int res, hdrlen; + + if (crypt == NULL || crypt->ops->decrypt_msdu == NULL) + return 0; + + hdr = (struct ieee80211_hdr *) skb->data; + hdrlen = hostap_80211_get_hdrlen(hdr->frame_control); + + atomic_inc(&crypt->refcnt); + res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv); + atomic_dec(&crypt->refcnt); + if (res < 0) { + printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed" + " (SA=%pM keyidx=%d)\n", + local->dev->name, hdr->addr2, keyidx); + return -1; + } + + return 0; +} + + +/* All received frames are sent to this function. @skb contains the frame in + * IEEE 802.11 format, i.e., in the format it was sent over air. + * This function is called only as a tasklet (software IRQ). */ +void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct hostap_interface *iface; + local_info_t *local; + struct ieee80211_hdr *hdr; + size_t hdrlen; + u16 fc, type, stype, sc; + struct net_device *wds = NULL; + unsigned int frag; + u8 *payload; + struct sk_buff *skb2 = NULL; + u16 ethertype; + int frame_authorized = 0; + int from_assoc_ap = 0; + u8 dst[ETH_ALEN]; + u8 src[ETH_ALEN]; + struct lib80211_crypt_data *crypt = NULL; + void *sta = NULL; + int keyidx = 0; + + iface = netdev_priv(dev); + local = iface->local; + iface->stats.rx_packets++; + iface->stats.rx_bytes += skb->len; + + /* dev is the master radio device; change this to be the default + * virtual interface (this may be changed to WDS device below) */ + dev = local->ddev; + iface = netdev_priv(dev); + + hdr = (struct ieee80211_hdr *) skb->data; + + if (skb->len < 10) + goto rx_dropped; + + fc = le16_to_cpu(hdr->frame_control); + type = fc & IEEE80211_FCTL_FTYPE; + stype = fc & IEEE80211_FCTL_STYPE; + sc = le16_to_cpu(hdr->seq_ctrl); + frag = sc & IEEE80211_SCTL_FRAG; + hdrlen = hostap_80211_get_hdrlen(hdr->frame_control); + + /* Put this code here so that we avoid duplicating it in all + * Rx paths. - Jean II */ +#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */ + /* If spy monitoring on */ + if (iface->spy_data.spy_number > 0) { + struct iw_quality wstats; + wstats.level = rx_stats->signal; + wstats.noise = rx_stats->noise; + wstats.updated = IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_UPDATED + | IW_QUAL_QUAL_INVALID | IW_QUAL_DBM; + /* Update spy records */ + wireless_spy_update(dev, hdr->addr2, &wstats); + } +#endif /* IW_WIRELESS_SPY */ + hostap_update_rx_stats(local->ap, hdr, rx_stats); + + if (local->iw_mode == IW_MODE_MONITOR) { + monitor_rx(dev, skb, rx_stats); + return; + } + + if (local->host_decrypt) { + int idx = 0; + if (skb->len >= hdrlen + 3) + idx = skb->data[hdrlen + 3] >> 6; + crypt = local->crypt_info.crypt[idx]; + sta = NULL; + + /* Use station specific key to override default keys if the + * receiver address is a unicast address ("individual RA"). If + * bcrx_sta_key parameter is set, station specific key is used + * even with broad/multicast targets (this is against IEEE + * 802.11, but makes it easier to use different keys with + * stations that do not support WEP key mapping). */ + + if (!(hdr->addr1[0] & 0x01) || local->bcrx_sta_key) + (void) hostap_handle_sta_crypto(local, hdr, &crypt, + &sta); + + /* allow NULL decrypt to indicate an station specific override + * for default encryption */ + if (crypt && (crypt->ops == NULL || + crypt->ops->decrypt_mpdu == NULL)) + crypt = NULL; + + if (!crypt && (fc & IEEE80211_FCTL_PROTECTED)) { +#if 0 + /* This seems to be triggered by some (multicast?) + * frames from other than current BSS, so just drop the + * frames silently instead of filling system log with + * these reports. */ + printk(KERN_DEBUG "%s: WEP decryption failed (not set)" + " (SA=%pM)\n", + local->dev->name, hdr->addr2); +#endif + local->comm_tallies.rx_discards_wep_undecryptable++; + goto rx_dropped; + } + } + + if (type != IEEE80211_FTYPE_DATA) { + if (type == IEEE80211_FTYPE_MGMT && + stype == IEEE80211_STYPE_AUTH && + fc & IEEE80211_FCTL_PROTECTED && local->host_decrypt && + (keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0) + { + printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth " + "from %pM\n", dev->name, hdr->addr2); + /* TODO: could inform hostapd about this so that it + * could send auth failure report */ + goto rx_dropped; + } + + if (hostap_rx_frame_mgmt(local, skb, rx_stats, type, stype)) + goto rx_dropped; + else + goto rx_exit; + } + + /* Data frame - extract src/dst addresses */ + if (skb->len < IEEE80211_DATA_HDR3_LEN) + goto rx_dropped; + + switch (fc & (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) { + case IEEE80211_FCTL_FROMDS: + memcpy(dst, hdr->addr1, ETH_ALEN); + memcpy(src, hdr->addr3, ETH_ALEN); + break; + case IEEE80211_FCTL_TODS: + memcpy(dst, hdr->addr3, ETH_ALEN); + memcpy(src, hdr->addr2, ETH_ALEN); + break; + case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS: + if (skb->len < IEEE80211_DATA_HDR4_LEN) + goto rx_dropped; + memcpy(dst, hdr->addr3, ETH_ALEN); + memcpy(src, hdr->addr4, ETH_ALEN); + break; + case 0: + memcpy(dst, hdr->addr1, ETH_ALEN); + memcpy(src, hdr->addr2, ETH_ALEN); + break; + } + + if (hostap_rx_frame_wds(local, hdr, fc, &wds)) + goto rx_dropped; + if (wds) + skb->dev = dev = wds; + + if (local->iw_mode == IW_MODE_MASTER && !wds && + (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == + IEEE80211_FCTL_FROMDS && + local->stadev && + memcmp(hdr->addr2, local->assoc_ap_addr, ETH_ALEN) == 0) { + /* Frame from BSSID of the AP for which we are a client */ + skb->dev = dev = local->stadev; + from_assoc_ap = 1; + } + + if ((local->iw_mode == IW_MODE_MASTER || + local->iw_mode == IW_MODE_REPEAT) && + !from_assoc_ap) { + switch (hostap_handle_sta_rx(local, dev, skb, rx_stats, + wds != NULL)) { + case AP_RX_CONTINUE_NOT_AUTHORIZED: + frame_authorized = 0; + break; + case AP_RX_CONTINUE: + frame_authorized = 1; + break; + case AP_RX_DROP: + goto rx_dropped; + case AP_RX_EXIT: + goto rx_exit; + } + } + + /* Nullfunc frames may have PS-bit set, so they must be passed to + * hostap_handle_sta_rx() before being dropped here. */ + if (stype != IEEE80211_STYPE_DATA && + stype != IEEE80211_STYPE_DATA_CFACK && + stype != IEEE80211_STYPE_DATA_CFPOLL && + stype != IEEE80211_STYPE_DATA_CFACKPOLL) { + if (stype != IEEE80211_STYPE_NULLFUNC) + printk(KERN_DEBUG "%s: RX: dropped data frame " + "with no data (type=0x%02x, subtype=0x%02x)\n", + dev->name, type >> 2, stype >> 4); + goto rx_dropped; + } + + /* skb: hdr + (possibly fragmented, possibly encrypted) payload */ + + if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) && + (keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0) + goto rx_dropped; + hdr = (struct ieee80211_hdr *) skb->data; + + /* skb: hdr + (possibly fragmented) plaintext payload */ + + if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) && + (frag != 0 || (fc & IEEE80211_FCTL_MOREFRAGS))) { + int flen; + struct sk_buff *frag_skb = + prism2_frag_cache_get(local, hdr); + if (!frag_skb) { + printk(KERN_DEBUG "%s: Rx cannot get skb from " + "fragment cache (morefrag=%d seq=%u frag=%u)\n", + dev->name, (fc & IEEE80211_FCTL_MOREFRAGS) != 0, + (sc & IEEE80211_SCTL_SEQ) >> 4, frag); + goto rx_dropped; + } + + flen = skb->len; + if (frag != 0) + flen -= hdrlen; + + if (frag_skb->tail + flen > frag_skb->end) { + printk(KERN_WARNING "%s: host decrypted and " + "reassembled frame did not fit skb\n", + dev->name); + prism2_frag_cache_invalidate(local, hdr); + goto rx_dropped; + } + + if (frag == 0) { + /* copy first fragment (including full headers) into + * beginning of the fragment cache skb */ + skb_copy_from_linear_data(skb, skb_put(frag_skb, flen), + flen); + } else { + /* append frame payload to the end of the fragment + * cache skb */ + skb_copy_from_linear_data_offset(skb, hdrlen, + skb_put(frag_skb, + flen), flen); + } + dev_kfree_skb(skb); + skb = NULL; + + if (fc & IEEE80211_FCTL_MOREFRAGS) { + /* more fragments expected - leave the skb in fragment + * cache for now; it will be delivered to upper layers + * after all fragments have been received */ + goto rx_exit; + } + + /* this was the last fragment and the frame will be + * delivered, so remove skb from fragment cache */ + skb = frag_skb; + hdr = (struct ieee80211_hdr *) skb->data; + prism2_frag_cache_invalidate(local, hdr); + } + + /* skb: hdr + (possible reassembled) full MSDU payload; possibly still + * encrypted/authenticated */ + + if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) && + hostap_rx_frame_decrypt_msdu(local, skb, keyidx, crypt)) + goto rx_dropped; + + hdr = (struct ieee80211_hdr *) skb->data; + if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !local->open_wep) { + if (local->ieee_802_1x && + hostap_is_eapol_frame(local, skb)) { + /* pass unencrypted EAPOL frames even if encryption is + * configured */ + PDEBUG(DEBUG_EXTRA2, "%s: RX: IEEE 802.1X - passing " + "unencrypted EAPOL frame\n", local->dev->name); + } else { + printk(KERN_DEBUG "%s: encryption configured, but RX " + "frame not encrypted (SA=%pM)\n", + local->dev->name, hdr->addr2); + goto rx_dropped; + } + } + + if (local->drop_unencrypted && !(fc & IEEE80211_FCTL_PROTECTED) && + !hostap_is_eapol_frame(local, skb)) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: dropped unencrypted RX data " + "frame from %pM (drop_unencrypted=1)\n", + dev->name, hdr->addr2); + } + goto rx_dropped; + } + + /* skb: hdr + (possible reassembled) full plaintext payload */ + + payload = skb->data + hdrlen; + ethertype = (payload[6] << 8) | payload[7]; + + /* If IEEE 802.1X is used, check whether the port is authorized to send + * the received frame. */ + if (local->ieee_802_1x && local->iw_mode == IW_MODE_MASTER) { + if (ethertype == ETH_P_PAE) { + PDEBUG(DEBUG_EXTRA2, "%s: RX: IEEE 802.1X frame\n", + dev->name); + if (local->hostapd && local->apdev) { + /* Send IEEE 802.1X frames to the user + * space daemon for processing */ + prism2_rx_80211(local->apdev, skb, rx_stats, + PRISM2_RX_MGMT); + local->apdevstats.rx_packets++; + local->apdevstats.rx_bytes += skb->len; + goto rx_exit; + } + } else if (!frame_authorized) { + printk(KERN_DEBUG "%s: dropped frame from " + "unauthorized port (IEEE 802.1X): " + "ethertype=0x%04x\n", + dev->name, ethertype); + goto rx_dropped; + } + } + + /* convert hdr + possible LLC headers into Ethernet header */ + if (skb->len - hdrlen >= 8 && + ((memcmp(payload, rfc1042_header, 6) == 0 && + ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || + memcmp(payload, bridge_tunnel_header, 6) == 0)) { + /* remove RFC1042 or Bridge-Tunnel encapsulation and + * replace EtherType */ + skb_pull(skb, hdrlen + 6); + memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); + memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); + } else { + __be16 len; + /* Leave Ethernet header part of hdr and full payload */ + skb_pull(skb, hdrlen); + len = htons(skb->len); + memcpy(skb_push(skb, 2), &len, 2); + memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); + memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); + } + + if (wds && ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == + IEEE80211_FCTL_TODS) && + skb->len >= ETH_HLEN + ETH_ALEN) { + /* Non-standard frame: get addr4 from its bogus location after + * the payload */ + skb_copy_from_linear_data_offset(skb, skb->len - ETH_ALEN, + skb->data + ETH_ALEN, + ETH_ALEN); + skb_trim(skb, skb->len - ETH_ALEN); + } + + dev->stats.rx_packets++; + dev->stats.rx_bytes += skb->len; + + if (local->iw_mode == IW_MODE_MASTER && !wds && + local->ap->bridge_packets) { + if (dst[0] & 0x01) { + /* copy multicast frame both to the higher layers and + * to the wireless media */ + local->ap->bridged_multicast++; + skb2 = skb_clone(skb, GFP_ATOMIC); + if (skb2 == NULL) + printk(KERN_DEBUG "%s: skb_clone failed for " + "multicast frame\n", dev->name); + } else if (hostap_is_sta_authorized(local->ap, dst)) { + /* send frame directly to the associated STA using + * wireless media and not passing to higher layers */ + local->ap->bridged_unicast++; + skb2 = skb; + skb = NULL; + } + } + + if (skb2 != NULL) { + /* send to wireless media */ + skb2->dev = dev; + skb2->protocol = cpu_to_be16(ETH_P_802_3); + skb_reset_mac_header(skb2); + skb_reset_network_header(skb2); + /* skb2->network_header += ETH_HLEN; */ + dev_queue_xmit(skb2); + } + + if (skb) { + skb->protocol = eth_type_trans(skb, dev); + memset(skb->cb, 0, sizeof(skb->cb)); + netif_rx(skb); + } + + rx_exit: + if (sta) + hostap_handle_sta_release(sta); + return; + + rx_dropped: + dev_kfree_skb(skb); + + dev->stats.rx_dropped++; + goto rx_exit; +} + + +EXPORT_SYMBOL(hostap_80211_rx); diff --git a/drivers/net/wireless/intersil/hostap/hostap_80211_tx.c b/drivers/net/wireless/intersil/hostap/hostap_80211_tx.c new file mode 100644 index 000000000..055e11d35 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_80211_tx.c @@ -0,0 +1,553 @@ +#include <linux/slab.h> +#include <linux/export.h> +#include <linux/etherdevice.h> + +#include "hostap_80211.h" +#include "hostap_common.h" +#include "hostap_wlan.h" +#include "hostap.h" +#include "hostap_ap.h" + +/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ +/* Ethernet-II snap header (RFC1042 for most EtherTypes) */ +static unsigned char rfc1042_header[] = +{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; +/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ +static unsigned char bridge_tunnel_header[] = +{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; +/* No encapsulation header if EtherType < 0x600 (=length) */ + +void hostap_dump_tx_80211(const char *name, struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr; + u16 fc; + + hdr = (struct ieee80211_hdr *) skb->data; + + printk(KERN_DEBUG "%s: TX len=%d jiffies=%ld\n", + name, skb->len, jiffies); + + if (skb->len < 2) + return; + + fc = le16_to_cpu(hdr->frame_control); + printk(KERN_DEBUG " FC=0x%04x (type=%d:%d)%s%s", + fc, (fc & IEEE80211_FCTL_FTYPE) >> 2, + (fc & IEEE80211_FCTL_STYPE) >> 4, + fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", + fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); + + if (skb->len < IEEE80211_DATA_HDR3_LEN) { + printk("\n"); + return; + } + + printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id), + le16_to_cpu(hdr->seq_ctrl)); + + printk(KERN_DEBUG " A1=%pM", hdr->addr1); + printk(" A2=%pM", hdr->addr2); + printk(" A3=%pM", hdr->addr3); + if (skb->len >= 30) + printk(" A4=%pM", hdr->addr4); + printk("\n"); +} + + +/* hard_start_xmit function for data interfaces (wlan#, wlan#wds#, wlan#sta) + * Convert Ethernet header into a suitable IEEE 802.11 header depending on + * device configuration. */ +netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int need_headroom, need_tailroom = 0; + struct ieee80211_hdr hdr; + u16 fc, ethertype = 0; + enum { + WDS_NO = 0, WDS_OWN_FRAME, WDS_COMPLIANT_FRAME + } use_wds = WDS_NO; + u8 *encaps_data; + int hdr_len, encaps_len, skip_header_bytes; + int to_assoc_ap = 0; + struct hostap_skb_tx_data *meta; + + iface = netdev_priv(dev); + local = iface->local; + + if (skb->len < ETH_HLEN) { + printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb " + "(len=%d)\n", dev->name, skb->len); + kfree_skb(skb); + return NETDEV_TX_OK; + } + + if (local->ddev != dev) { + use_wds = (local->iw_mode == IW_MODE_MASTER && + !(local->wds_type & HOSTAP_WDS_STANDARD_FRAME)) ? + WDS_OWN_FRAME : WDS_COMPLIANT_FRAME; + if (dev == local->stadev) { + to_assoc_ap = 1; + use_wds = WDS_NO; + } else if (dev == local->apdev) { + printk(KERN_DEBUG "%s: prism2_tx: trying to use " + "AP device with Ethernet net dev\n", dev->name); + kfree_skb(skb); + return NETDEV_TX_OK; + } + } else { + if (local->iw_mode == IW_MODE_REPEAT) { + printk(KERN_DEBUG "%s: prism2_tx: trying to use " + "non-WDS link in Repeater mode\n", dev->name); + kfree_skb(skb); + return NETDEV_TX_OK; + } else if (local->iw_mode == IW_MODE_INFRA && + (local->wds_type & HOSTAP_WDS_AP_CLIENT) && + !ether_addr_equal(skb->data + ETH_ALEN, dev->dev_addr)) { + /* AP client mode: send frames with foreign src addr + * using 4-addr WDS frames */ + use_wds = WDS_COMPLIANT_FRAME; + } + } + + /* Incoming skb->data: dst_addr[6], src_addr[6], proto[2], payload + * ==> + * Prism2 TX frame with 802.11 header: + * txdesc (address order depending on used mode; includes dst_addr and + * src_addr), possible encapsulation (RFC1042/Bridge-Tunnel; + * proto[2], payload {, possible addr4[6]} */ + + ethertype = (skb->data[12] << 8) | skb->data[13]; + + memset(&hdr, 0, sizeof(hdr)); + + /* Length of data after IEEE 802.11 header */ + encaps_data = NULL; + encaps_len = 0; + skip_header_bytes = ETH_HLEN; + if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { + encaps_data = bridge_tunnel_header; + encaps_len = sizeof(bridge_tunnel_header); + skip_header_bytes -= 2; + } else if (ethertype >= 0x600) { + encaps_data = rfc1042_header; + encaps_len = sizeof(rfc1042_header); + skip_header_bytes -= 2; + } + + fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA; + hdr_len = IEEE80211_DATA_HDR3_LEN; + + if (use_wds != WDS_NO) { + /* Note! Prism2 station firmware has problems with sending real + * 802.11 frames with four addresses; until these problems can + * be fixed or worked around, 4-addr frames needed for WDS are + * using incompatible format: FromDS flag is not set and the + * fourth address is added after the frame payload; it is + * assumed, that the receiving station knows how to handle this + * frame format */ + + if (use_wds == WDS_COMPLIANT_FRAME) { + fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS; + /* From&To DS: Addr1 = RA, Addr2 = TA, Addr3 = DA, + * Addr4 = SA */ + skb_copy_from_linear_data_offset(skb, ETH_ALEN, + &hdr.addr4, ETH_ALEN); + hdr_len += ETH_ALEN; + } else { + /* bogus 4-addr format to workaround Prism2 station + * f/w bug */ + fc |= IEEE80211_FCTL_TODS; + /* From DS: Addr1 = DA (used as RA), + * Addr2 = BSSID (used as TA), Addr3 = SA (used as DA), + */ + + /* SA from skb->data + ETH_ALEN will be added after + * frame payload; use hdr.addr4 as a temporary buffer + */ + skb_copy_from_linear_data_offset(skb, ETH_ALEN, + &hdr.addr4, ETH_ALEN); + need_tailroom += ETH_ALEN; + } + + /* send broadcast and multicast frames to broadcast RA, if + * configured; otherwise, use unicast RA of the WDS link */ + if ((local->wds_type & HOSTAP_WDS_BROADCAST_RA) && + is_multicast_ether_addr(skb->data)) + eth_broadcast_addr(hdr.addr1); + else if (iface->type == HOSTAP_INTERFACE_WDS) + memcpy(&hdr.addr1, iface->u.wds.remote_addr, + ETH_ALEN); + else + memcpy(&hdr.addr1, local->bssid, ETH_ALEN); + memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN); + skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN); + } else if (local->iw_mode == IW_MODE_MASTER && !to_assoc_ap) { + fc |= IEEE80211_FCTL_FROMDS; + /* From DS: Addr1 = DA, Addr2 = BSSID, Addr3 = SA */ + skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN); + memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN); + skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr3, + ETH_ALEN); + } else if (local->iw_mode == IW_MODE_INFRA || to_assoc_ap) { + fc |= IEEE80211_FCTL_TODS; + /* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */ + memcpy(&hdr.addr1, to_assoc_ap ? + local->assoc_ap_addr : local->bssid, ETH_ALEN); + skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2, + ETH_ALEN); + skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN); + } else if (local->iw_mode == IW_MODE_ADHOC) { + /* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */ + skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN); + skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2, + ETH_ALEN); + memcpy(&hdr.addr3, local->bssid, ETH_ALEN); + } + + hdr.frame_control = cpu_to_le16(fc); + + skb_pull(skb, skip_header_bytes); + need_headroom = local->func->need_tx_headroom + hdr_len + encaps_len; + if (skb_tailroom(skb) < need_tailroom) { + skb = skb_unshare(skb, GFP_ATOMIC); + if (skb == NULL) { + iface->stats.tx_dropped++; + return NETDEV_TX_OK; + } + if (pskb_expand_head(skb, need_headroom, need_tailroom, + GFP_ATOMIC)) { + kfree_skb(skb); + iface->stats.tx_dropped++; + return NETDEV_TX_OK; + } + } else if (skb_headroom(skb) < need_headroom) { + struct sk_buff *tmp = skb; + skb = skb_realloc_headroom(skb, need_headroom); + kfree_skb(tmp); + if (skb == NULL) { + iface->stats.tx_dropped++; + return NETDEV_TX_OK; + } + } else { + skb = skb_unshare(skb, GFP_ATOMIC); + if (skb == NULL) { + iface->stats.tx_dropped++; + return NETDEV_TX_OK; + } + } + + if (encaps_data) + memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); + memcpy(skb_push(skb, hdr_len), &hdr, hdr_len); + if (use_wds == WDS_OWN_FRAME) { + memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN); + } + + iface->stats.tx_packets++; + iface->stats.tx_bytes += skb->len; + + skb_reset_mac_header(skb); + meta = (struct hostap_skb_tx_data *) skb->cb; + memset(meta, 0, sizeof(*meta)); + meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; + if (use_wds) + meta->flags |= HOSTAP_TX_FLAGS_WDS; + meta->ethertype = ethertype; + meta->iface = iface; + + /* Send IEEE 802.11 encapsulated frame using the master radio device */ + skb->dev = local->dev; + dev_queue_xmit(skb); + return NETDEV_TX_OK; +} + + +/* hard_start_xmit function for hostapd wlan#ap interfaces */ +netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hostap_skb_tx_data *meta; + struct ieee80211_hdr *hdr; + u16 fc; + + iface = netdev_priv(dev); + local = iface->local; + + if (skb->len < 10) { + printk(KERN_DEBUG "%s: hostap_mgmt_start_xmit: short skb " + "(len=%d)\n", dev->name, skb->len); + kfree_skb(skb); + return NETDEV_TX_OK; + } + + iface->stats.tx_packets++; + iface->stats.tx_bytes += skb->len; + + meta = (struct hostap_skb_tx_data *) skb->cb; + memset(meta, 0, sizeof(*meta)); + meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; + meta->iface = iface; + + if (skb->len >= IEEE80211_DATA_HDR3_LEN + sizeof(rfc1042_header) + 2) { + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_control); + if (ieee80211_is_data(hdr->frame_control) && + (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DATA) { + u8 *pos = &skb->data[IEEE80211_DATA_HDR3_LEN + + sizeof(rfc1042_header)]; + meta->ethertype = (pos[0] << 8) | pos[1]; + } + } + + /* Send IEEE 802.11 encapsulated frame using the master radio device */ + skb->dev = local->dev; + dev_queue_xmit(skb); + return NETDEV_TX_OK; +} + + +/* Called only from software IRQ */ +static struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, + struct lib80211_crypt_data *crypt) +{ + struct hostap_interface *iface; + local_info_t *local; + struct ieee80211_hdr *hdr; + int prefix_len, postfix_len, hdr_len, res; + + iface = netdev_priv(skb->dev); + local = iface->local; + + if (skb->len < IEEE80211_DATA_HDR3_LEN) { + kfree_skb(skb); + return NULL; + } + + if (local->tkip_countermeasures && + strcmp(crypt->ops->name, "TKIP") == 0) { + hdr = (struct ieee80211_hdr *) skb->data; + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " + "TX packet to %pM\n", + local->dev->name, hdr->addr1); + } + kfree_skb(skb); + return NULL; + } + + skb = skb_unshare(skb, GFP_ATOMIC); + if (skb == NULL) + return NULL; + + prefix_len = crypt->ops->extra_mpdu_prefix_len + + crypt->ops->extra_msdu_prefix_len; + postfix_len = crypt->ops->extra_mpdu_postfix_len + + crypt->ops->extra_msdu_postfix_len; + if ((skb_headroom(skb) < prefix_len || + skb_tailroom(skb) < postfix_len) && + pskb_expand_head(skb, prefix_len, postfix_len, GFP_ATOMIC)) { + kfree_skb(skb); + return NULL; + } + + hdr = (struct ieee80211_hdr *) skb->data; + hdr_len = hostap_80211_get_hdrlen(hdr->frame_control); + + /* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so + * call both MSDU and MPDU encryption functions from here. */ + atomic_inc(&crypt->refcnt); + res = 0; + if (crypt->ops->encrypt_msdu) + res = crypt->ops->encrypt_msdu(skb, hdr_len, crypt->priv); + if (res == 0 && crypt->ops->encrypt_mpdu) + res = crypt->ops->encrypt_mpdu(skb, hdr_len, crypt->priv); + atomic_dec(&crypt->refcnt); + if (res < 0) { + kfree_skb(skb); + return NULL; + } + + return skb; +} + + +/* hard_start_xmit function for master radio interface wifi#. + * AP processing (TX rate control, power save buffering, etc.). + * Use hardware TX function to send the frame. */ +netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + netdev_tx_t ret = NETDEV_TX_BUSY; + u16 fc; + struct hostap_tx_data tx; + ap_tx_ret tx_ret; + struct hostap_skb_tx_data *meta; + int no_encrypt = 0; + struct ieee80211_hdr *hdr; + + iface = netdev_priv(dev); + local = iface->local; + + tx.skb = skb; + tx.sta_ptr = NULL; + + meta = (struct hostap_skb_tx_data *) skb->cb; + if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) { + printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, " + "expected 0x%08x)\n", + dev->name, meta->magic, HOSTAP_SKB_TX_DATA_MAGIC); + ret = NETDEV_TX_OK; + iface->stats.tx_dropped++; + goto fail; + } + + if (local->host_encrypt) { + /* Set crypt to default algorithm and key; will be replaced in + * AP code if STA has own alg/key */ + tx.crypt = local->crypt_info.crypt[local->crypt_info.tx_keyidx]; + tx.host_encrypt = 1; + } else { + tx.crypt = NULL; + tx.host_encrypt = 0; + } + + if (skb->len < 24) { + printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb " + "(len=%d)\n", dev->name, skb->len); + ret = NETDEV_TX_OK; + iface->stats.tx_dropped++; + goto fail; + } + + /* FIX (?): + * Wi-Fi 802.11b test plan suggests that AP should ignore power save + * bit in authentication and (re)association frames and assume tha + * STA remains awake for the response. */ + tx_ret = hostap_handle_sta_tx(local, &tx); + skb = tx.skb; + meta = (struct hostap_skb_tx_data *) skb->cb; + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_control); + switch (tx_ret) { + case AP_TX_CONTINUE: + break; + case AP_TX_CONTINUE_NOT_AUTHORIZED: + if (local->ieee_802_1x && + ieee80211_is_data(hdr->frame_control) && + meta->ethertype != ETH_P_PAE && + !(meta->flags & HOSTAP_TX_FLAGS_WDS)) { + printk(KERN_DEBUG "%s: dropped frame to unauthorized " + "port (IEEE 802.1X): ethertype=0x%04x\n", + dev->name, meta->ethertype); + hostap_dump_tx_80211(dev->name, skb); + + ret = NETDEV_TX_OK; /* drop packet */ + iface->stats.tx_dropped++; + goto fail; + } + break; + case AP_TX_DROP: + ret = NETDEV_TX_OK; /* drop packet */ + iface->stats.tx_dropped++; + goto fail; + case AP_TX_RETRY: + goto fail; + case AP_TX_BUFFERED: + /* do not free skb here, it will be freed when the + * buffered frame is sent/timed out */ + ret = NETDEV_TX_OK; + goto tx_exit; + } + + /* Request TX callback if protocol version is 2 in 802.11 header; + * this version 2 is a special case used between hostapd and kernel + * driver */ + if (((fc & IEEE80211_FCTL_VERS) == BIT(1)) && + local->ap && local->ap->tx_callback_idx && meta->tx_cb_idx == 0) { + meta->tx_cb_idx = local->ap->tx_callback_idx; + + /* remove special version from the frame header */ + fc &= ~IEEE80211_FCTL_VERS; + hdr->frame_control = cpu_to_le16(fc); + } + + if (!ieee80211_is_data(hdr->frame_control)) { + no_encrypt = 1; + tx.crypt = NULL; + } + + if (local->ieee_802_1x && meta->ethertype == ETH_P_PAE && tx.crypt && + !(fc & IEEE80211_FCTL_PROTECTED)) { + no_encrypt = 1; + PDEBUG(DEBUG_EXTRA2, "%s: TX: IEEE 802.1X - passing " + "unencrypted EAPOL frame\n", dev->name); + tx.crypt = NULL; /* no encryption for IEEE 802.1X frames */ + } + + if (tx.crypt && (!tx.crypt->ops || !tx.crypt->ops->encrypt_mpdu)) + tx.crypt = NULL; + else if ((tx.crypt || + local->crypt_info.crypt[local->crypt_info.tx_keyidx]) && + !no_encrypt) { + /* Add ISWEP flag both for firmware and host based encryption + */ + fc |= IEEE80211_FCTL_PROTECTED; + hdr->frame_control = cpu_to_le16(fc); + } else if (local->drop_unencrypted && + ieee80211_is_data(hdr->frame_control) && + meta->ethertype != ETH_P_PAE) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: dropped unencrypted TX data " + "frame (drop_unencrypted=1)\n", dev->name); + } + iface->stats.tx_dropped++; + ret = NETDEV_TX_OK; + goto fail; + } + + if (tx.crypt) { + skb = hostap_tx_encrypt(skb, tx.crypt); + if (skb == NULL) { + printk(KERN_DEBUG "%s: TX - encryption failed\n", + dev->name); + ret = NETDEV_TX_OK; + goto fail; + } + meta = (struct hostap_skb_tx_data *) skb->cb; + if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) { + printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, " + "expected 0x%08x) after hostap_tx_encrypt\n", + dev->name, meta->magic, + HOSTAP_SKB_TX_DATA_MAGIC); + ret = NETDEV_TX_OK; + iface->stats.tx_dropped++; + goto fail; + } + } + + if (local->func->tx == NULL || local->func->tx(skb, dev)) { + ret = NETDEV_TX_OK; + iface->stats.tx_dropped++; + } else { + ret = NETDEV_TX_OK; + iface->stats.tx_packets++; + iface->stats.tx_bytes += skb->len; + } + + fail: + if (ret == NETDEV_TX_OK && skb) + dev_kfree_skb(skb); + tx_exit: + if (tx.sta_ptr) + hostap_handle_sta_release(tx.sta_ptr); + return ret; +} + + +EXPORT_SYMBOL(hostap_master_start_xmit); diff --git a/drivers/net/wireless/intersil/hostap/hostap_ap.c b/drivers/net/wireless/intersil/hostap/hostap_ap.c new file mode 100644 index 000000000..c995ace15 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_ap.c @@ -0,0 +1,3339 @@ +/* + * Intersil Prism2 driver with Host AP (software access point) support + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * <j@w1.fi> + * Copyright (c) 2002-2005, Jouni Malinen <j@w1.fi> + * + * This file is to be included into hostap.c when S/W AP functionality is + * compiled. + * + * AP: FIX: + * - if unicast Class 2 (assoc,reassoc,disassoc) frame received from + * unauthenticated STA, send deauth. frame (8802.11: 5.5) + * - if unicast Class 3 (data with to/from DS,deauth,pspoll) frame received + * from authenticated, but unassoc STA, send disassoc frame (8802.11: 5.5) + * - if unicast Class 3 received from unauthenticated STA, send deauth. frame + * (8802.11: 5.5) + */ + +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/delay.h> +#include <linux/random.h> +#include <linux/if_arp.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <linux/moduleparam.h> +#include <linux/etherdevice.h> + +#include "hostap_wlan.h" +#include "hostap.h" +#include "hostap_ap.h" + +static int other_ap_policy[MAX_PARM_DEVICES] = { AP_OTHER_AP_SKIP_ALL, + DEF_INTS }; +module_param_array(other_ap_policy, int, NULL, 0444); +MODULE_PARM_DESC(other_ap_policy, "Other AP beacon monitoring policy (0-3)"); + +static int ap_max_inactivity[MAX_PARM_DEVICES] = { AP_MAX_INACTIVITY_SEC, + DEF_INTS }; +module_param_array(ap_max_inactivity, int, NULL, 0444); +MODULE_PARM_DESC(ap_max_inactivity, "AP timeout (in seconds) for station " + "inactivity"); + +static int ap_bridge_packets[MAX_PARM_DEVICES] = { 1, DEF_INTS }; +module_param_array(ap_bridge_packets, int, NULL, 0444); +MODULE_PARM_DESC(ap_bridge_packets, "Bridge packets directly between " + "stations"); + +static int autom_ap_wds[MAX_PARM_DEVICES] = { 0, DEF_INTS }; +module_param_array(autom_ap_wds, int, NULL, 0444); +MODULE_PARM_DESC(autom_ap_wds, "Add WDS connections to other APs " + "automatically"); + + +static struct sta_info* ap_get_sta(struct ap_data *ap, u8 *sta); +static void hostap_event_expired_sta(struct net_device *dev, + struct sta_info *sta); +static void handle_add_proc_queue(struct work_struct *work); + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +static void handle_wds_oper_queue(struct work_struct *work); +static void prism2_send_mgmt(struct net_device *dev, + u16 type_subtype, char *body, + int body_len, u8 *addr, u16 tx_cb_idx); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +#ifndef PRISM2_NO_PROCFS_DEBUG +static int ap_debug_proc_show(struct seq_file *m, void *v) +{ + struct ap_data *ap = m->private; + + seq_printf(m, "BridgedUnicastFrames=%u\n", ap->bridged_unicast); + seq_printf(m, "BridgedMulticastFrames=%u\n", ap->bridged_multicast); + seq_printf(m, "max_inactivity=%u\n", ap->max_inactivity / HZ); + seq_printf(m, "bridge_packets=%u\n", ap->bridge_packets); + seq_printf(m, "nullfunc_ack=%u\n", ap->nullfunc_ack); + seq_printf(m, "autom_ap_wds=%u\n", ap->autom_ap_wds); + seq_printf(m, "auth_algs=%u\n", ap->local->auth_algs); + seq_printf(m, "tx_drop_nonassoc=%u\n", ap->tx_drop_nonassoc); + return 0; +} + +static int ap_debug_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ap_debug_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations ap_debug_proc_fops = { + .open = ap_debug_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif /* PRISM2_NO_PROCFS_DEBUG */ + + +static void ap_sta_hash_add(struct ap_data *ap, struct sta_info *sta) +{ + sta->hnext = ap->sta_hash[STA_HASH(sta->addr)]; + ap->sta_hash[STA_HASH(sta->addr)] = sta; +} + +static void ap_sta_hash_del(struct ap_data *ap, struct sta_info *sta) +{ + struct sta_info *s; + + s = ap->sta_hash[STA_HASH(sta->addr)]; + if (s == NULL) return; + if (ether_addr_equal(s->addr, sta->addr)) { + ap->sta_hash[STA_HASH(sta->addr)] = s->hnext; + return; + } + + while (s->hnext != NULL && !ether_addr_equal(s->hnext->addr, sta->addr)) + s = s->hnext; + if (s->hnext != NULL) + s->hnext = s->hnext->hnext; + else + printk("AP: could not remove STA %pM from hash table\n", + sta->addr); +} + +static void ap_free_sta(struct ap_data *ap, struct sta_info *sta) +{ + if (sta->ap && sta->local) + hostap_event_expired_sta(sta->local->dev, sta); + + if (ap->proc != NULL) { + char name[20]; + sprintf(name, "%pM", sta->addr); + remove_proc_entry(name, ap->proc); + } + + if (sta->crypt) { + sta->crypt->ops->deinit(sta->crypt->priv); + kfree(sta->crypt); + sta->crypt = NULL; + } + + skb_queue_purge(&sta->tx_buf); + + ap->num_sta--; +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (sta->aid > 0) + ap->sta_aid[sta->aid - 1] = NULL; + + if (!sta->ap) + kfree(sta->u.sta.challenge); + del_timer_sync(&sta->timer); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + kfree(sta); +} + + +static void hostap_set_tim(local_info_t *local, int aid, int set) +{ + if (local->func->set_tim) + local->func->set_tim(local->dev, aid, set); +} + + +static void hostap_event_new_sta(struct net_device *dev, struct sta_info *sta) +{ + union iwreq_data wrqu; + memset(&wrqu, 0, sizeof(wrqu)); + memcpy(wrqu.addr.sa_data, sta->addr, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + wireless_send_event(dev, IWEVREGISTERED, &wrqu, NULL); +} + + +static void hostap_event_expired_sta(struct net_device *dev, + struct sta_info *sta) +{ + union iwreq_data wrqu; + memset(&wrqu, 0, sizeof(wrqu)); + memcpy(wrqu.addr.sa_data, sta->addr, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + wireless_send_event(dev, IWEVEXPIRED, &wrqu, NULL); +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + +static void ap_handle_timer(unsigned long data) +{ + struct sta_info *sta = (struct sta_info *) data; + local_info_t *local; + struct ap_data *ap; + unsigned long next_time = 0; + int was_assoc; + + if (sta == NULL || sta->local == NULL || sta->local->ap == NULL) { + PDEBUG(DEBUG_AP, "ap_handle_timer() called with NULL data\n"); + return; + } + + local = sta->local; + ap = local->ap; + was_assoc = sta->flags & WLAN_STA_ASSOC; + + if (atomic_read(&sta->users) != 0) + next_time = jiffies + HZ; + else if ((sta->flags & WLAN_STA_PERM) && !(sta->flags & WLAN_STA_AUTH)) + next_time = jiffies + ap->max_inactivity; + + if (time_before(jiffies, sta->last_rx + ap->max_inactivity)) { + /* station activity detected; reset timeout state */ + sta->timeout_next = STA_NULLFUNC; + next_time = sta->last_rx + ap->max_inactivity; + } else if (sta->timeout_next == STA_DISASSOC && + !(sta->flags & WLAN_STA_PENDING_POLL)) { + /* STA ACKed data nullfunc frame poll */ + sta->timeout_next = STA_NULLFUNC; + next_time = jiffies + ap->max_inactivity; + } + + if (next_time) { + sta->timer.expires = next_time; + add_timer(&sta->timer); + return; + } + + if (sta->ap) + sta->timeout_next = STA_DEAUTH; + + if (sta->timeout_next == STA_DEAUTH && !(sta->flags & WLAN_STA_PERM)) { + spin_lock(&ap->sta_table_lock); + ap_sta_hash_del(ap, sta); + list_del(&sta->list); + spin_unlock(&ap->sta_table_lock); + sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC); + } else if (sta->timeout_next == STA_DISASSOC) + sta->flags &= ~WLAN_STA_ASSOC; + + if (was_assoc && !(sta->flags & WLAN_STA_ASSOC) && !sta->ap) + hostap_event_expired_sta(local->dev, sta); + + if (sta->timeout_next == STA_DEAUTH && sta->aid > 0 && + !skb_queue_empty(&sta->tx_buf)) { + hostap_set_tim(local, sta->aid, 0); + sta->flags &= ~WLAN_STA_TIM; + } + + if (sta->ap) { + if (ap->autom_ap_wds) { + PDEBUG(DEBUG_AP, "%s: removing automatic WDS " + "connection to AP %pM\n", + local->dev->name, sta->addr); + hostap_wds_link_oper(local, sta->addr, WDS_DEL); + } + } else if (sta->timeout_next == STA_NULLFUNC) { + /* send data frame to poll STA and check whether this frame + * is ACKed */ + /* FIX: IEEE80211_STYPE_NULLFUNC would be more appropriate, but + * it is apparently not retried so TX Exc events are not + * received for it */ + sta->flags |= WLAN_STA_PENDING_POLL; + prism2_send_mgmt(local->dev, IEEE80211_FTYPE_DATA | + IEEE80211_STYPE_DATA, NULL, 0, + sta->addr, ap->tx_callback_poll); + } else { + int deauth = sta->timeout_next == STA_DEAUTH; + __le16 resp; + PDEBUG(DEBUG_AP, "%s: sending %s info to STA %pM" + "(last=%lu, jiffies=%lu)\n", + local->dev->name, + deauth ? "deauthentication" : "disassociation", + sta->addr, sta->last_rx, jiffies); + + resp = cpu_to_le16(deauth ? WLAN_REASON_PREV_AUTH_NOT_VALID : + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); + prism2_send_mgmt(local->dev, IEEE80211_FTYPE_MGMT | + (deauth ? IEEE80211_STYPE_DEAUTH : + IEEE80211_STYPE_DISASSOC), + (char *) &resp, 2, sta->addr, 0); + } + + if (sta->timeout_next == STA_DEAUTH) { + if (sta->flags & WLAN_STA_PERM) { + PDEBUG(DEBUG_AP, "%s: STA %pM" + " would have been removed, " + "but it has 'perm' flag\n", + local->dev->name, sta->addr); + } else + ap_free_sta(ap, sta); + return; + } + + if (sta->timeout_next == STA_NULLFUNC) { + sta->timeout_next = STA_DISASSOC; + sta->timer.expires = jiffies + AP_DISASSOC_DELAY; + } else { + sta->timeout_next = STA_DEAUTH; + sta->timer.expires = jiffies + AP_DEAUTH_DELAY; + } + + add_timer(&sta->timer); +} + + +void hostap_deauth_all_stas(struct net_device *dev, struct ap_data *ap, + int resend) +{ + u8 addr[ETH_ALEN]; + __le16 resp; + int i; + + PDEBUG(DEBUG_AP, "%s: Deauthenticate all stations\n", dev->name); + eth_broadcast_addr(addr); + + resp = cpu_to_le16(WLAN_REASON_PREV_AUTH_NOT_VALID); + + /* deauth message sent; try to resend it few times; the message is + * broadcast, so it may be delayed until next DTIM; there is not much + * else we can do at this point since the driver is going to be shut + * down */ + for (i = 0; i < 5; i++) { + prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_DEAUTH, + (char *) &resp, 2, addr, 0); + + if (!resend || ap->num_sta <= 0) + return; + + mdelay(50); + } +} + + +static int ap_control_proc_show(struct seq_file *m, void *v) +{ + struct ap_data *ap = m->private; + char *policy_txt; + struct mac_entry *entry; + + if (v == SEQ_START_TOKEN) { + switch (ap->mac_restrictions.policy) { + case MAC_POLICY_OPEN: + policy_txt = "open"; + break; + case MAC_POLICY_ALLOW: + policy_txt = "allow"; + break; + case MAC_POLICY_DENY: + policy_txt = "deny"; + break; + default: + policy_txt = "unknown"; + break; + } + seq_printf(m, "MAC policy: %s\n", policy_txt); + seq_printf(m, "MAC entries: %u\n", ap->mac_restrictions.entries); + seq_puts(m, "MAC list:\n"); + return 0; + } + + entry = v; + seq_printf(m, "%pM\n", entry->addr); + return 0; +} + +static void *ap_control_proc_start(struct seq_file *m, loff_t *_pos) +{ + struct ap_data *ap = m->private; + spin_lock_bh(&ap->mac_restrictions.lock); + return seq_list_start_head(&ap->mac_restrictions.mac_list, *_pos); +} + +static void *ap_control_proc_next(struct seq_file *m, void *v, loff_t *_pos) +{ + struct ap_data *ap = m->private; + return seq_list_next(v, &ap->mac_restrictions.mac_list, _pos); +} + +static void ap_control_proc_stop(struct seq_file *m, void *v) +{ + struct ap_data *ap = m->private; + spin_unlock_bh(&ap->mac_restrictions.lock); +} + +static const struct seq_operations ap_control_proc_seqops = { + .start = ap_control_proc_start, + .next = ap_control_proc_next, + .stop = ap_control_proc_stop, + .show = ap_control_proc_show, +}; + +static int ap_control_proc_open(struct inode *inode, struct file *file) +{ + int ret = seq_open(file, &ap_control_proc_seqops); + if (ret == 0) { + struct seq_file *m = file->private_data; + m->private = PDE_DATA(inode); + } + return ret; +} + +static const struct file_operations ap_control_proc_fops = { + .open = ap_control_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + + +int ap_control_add_mac(struct mac_restrictions *mac_restrictions, u8 *mac) +{ + struct mac_entry *entry; + + entry = kmalloc(sizeof(struct mac_entry), GFP_KERNEL); + if (entry == NULL) + return -ENOMEM; + + memcpy(entry->addr, mac, ETH_ALEN); + + spin_lock_bh(&mac_restrictions->lock); + list_add_tail(&entry->list, &mac_restrictions->mac_list); + mac_restrictions->entries++; + spin_unlock_bh(&mac_restrictions->lock); + + return 0; +} + + +int ap_control_del_mac(struct mac_restrictions *mac_restrictions, u8 *mac) +{ + struct list_head *ptr; + struct mac_entry *entry; + + spin_lock_bh(&mac_restrictions->lock); + for (ptr = mac_restrictions->mac_list.next; + ptr != &mac_restrictions->mac_list; ptr = ptr->next) { + entry = list_entry(ptr, struct mac_entry, list); + + if (ether_addr_equal(entry->addr, mac)) { + list_del(ptr); + kfree(entry); + mac_restrictions->entries--; + spin_unlock_bh(&mac_restrictions->lock); + return 0; + } + } + spin_unlock_bh(&mac_restrictions->lock); + return -1; +} + + +static int ap_control_mac_deny(struct mac_restrictions *mac_restrictions, + u8 *mac) +{ + struct mac_entry *entry; + int found = 0; + + if (mac_restrictions->policy == MAC_POLICY_OPEN) + return 0; + + spin_lock_bh(&mac_restrictions->lock); + list_for_each_entry(entry, &mac_restrictions->mac_list, list) { + if (ether_addr_equal(entry->addr, mac)) { + found = 1; + break; + } + } + spin_unlock_bh(&mac_restrictions->lock); + + if (mac_restrictions->policy == MAC_POLICY_ALLOW) + return !found; + else + return found; +} + + +void ap_control_flush_macs(struct mac_restrictions *mac_restrictions) +{ + struct list_head *ptr, *n; + struct mac_entry *entry; + + if (mac_restrictions->entries == 0) + return; + + spin_lock_bh(&mac_restrictions->lock); + for (ptr = mac_restrictions->mac_list.next, n = ptr->next; + ptr != &mac_restrictions->mac_list; + ptr = n, n = ptr->next) { + entry = list_entry(ptr, struct mac_entry, list); + list_del(ptr); + kfree(entry); + } + mac_restrictions->entries = 0; + spin_unlock_bh(&mac_restrictions->lock); +} + + +int ap_control_kick_mac(struct ap_data *ap, struct net_device *dev, u8 *mac) +{ + struct sta_info *sta; + __le16 resp; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, mac); + if (sta) { + ap_sta_hash_del(ap, sta); + list_del(&sta->list); + } + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta) + return -EINVAL; + + resp = cpu_to_le16(WLAN_REASON_PREV_AUTH_NOT_VALID); + prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH, + (char *) &resp, 2, sta->addr, 0); + + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap) + hostap_event_expired_sta(dev, sta); + + ap_free_sta(ap, sta); + + return 0; +} + +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +void ap_control_kickall(struct ap_data *ap) +{ + struct list_head *ptr, *n; + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + for (ptr = ap->sta_list.next, n = ptr->next; ptr != &ap->sta_list; + ptr = n, n = ptr->next) { + sta = list_entry(ptr, struct sta_info, list); + ap_sta_hash_del(ap, sta); + list_del(&sta->list); + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) + hostap_event_expired_sta(sta->local->dev, sta); + ap_free_sta(ap, sta); + } + spin_unlock_bh(&ap->sta_table_lock); +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + +static int prism2_ap_proc_show(struct seq_file *m, void *v) +{ + struct sta_info *sta = v; + int i; + + if (v == SEQ_START_TOKEN) { + seq_printf(m, "# BSSID CHAN SIGNAL NOISE RATE SSID FLAGS\n"); + return 0; + } + + if (!sta->ap) + return 0; + + seq_printf(m, "%pM %d %d %d %d '", + sta->addr, + sta->u.ap.channel, sta->last_rx_signal, + sta->last_rx_silence, sta->last_rx_rate); + + for (i = 0; i < sta->u.ap.ssid_len; i++) { + if (sta->u.ap.ssid[i] >= 32 && sta->u.ap.ssid[i] < 127) + seq_putc(m, sta->u.ap.ssid[i]); + else + seq_printf(m, "<%02x>", sta->u.ap.ssid[i]); + } + + seq_putc(m, '\''); + if (sta->capability & WLAN_CAPABILITY_ESS) + seq_puts(m, " [ESS]"); + if (sta->capability & WLAN_CAPABILITY_IBSS) + seq_puts(m, " [IBSS]"); + if (sta->capability & WLAN_CAPABILITY_PRIVACY) + seq_puts(m, " [WEP]"); + seq_putc(m, '\n'); + return 0; +} + +static void *prism2_ap_proc_start(struct seq_file *m, loff_t *_pos) +{ + struct ap_data *ap = m->private; + spin_lock_bh(&ap->sta_table_lock); + return seq_list_start_head(&ap->sta_list, *_pos); +} + +static void *prism2_ap_proc_next(struct seq_file *m, void *v, loff_t *_pos) +{ + struct ap_data *ap = m->private; + return seq_list_next(v, &ap->sta_list, _pos); +} + +static void prism2_ap_proc_stop(struct seq_file *m, void *v) +{ + struct ap_data *ap = m->private; + spin_unlock_bh(&ap->sta_table_lock); +} + +static const struct seq_operations prism2_ap_proc_seqops = { + .start = prism2_ap_proc_start, + .next = prism2_ap_proc_next, + .stop = prism2_ap_proc_stop, + .show = prism2_ap_proc_show, +}; + +static int prism2_ap_proc_open(struct inode *inode, struct file *file) +{ + int ret = seq_open(file, &prism2_ap_proc_seqops); + if (ret == 0) { + struct seq_file *m = file->private_data; + m->private = PDE_DATA(inode); + } + return ret; +} + +static const struct file_operations prism2_ap_proc_fops = { + .open = prism2_ap_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +void hostap_check_sta_fw_version(struct ap_data *ap, int sta_fw_ver) +{ + if (!ap) + return; + + if (sta_fw_ver == PRISM2_FW_VER(0,8,0)) { + PDEBUG(DEBUG_AP, "Using data::nullfunc ACK workaround - " + "firmware upgrade recommended\n"); + ap->nullfunc_ack = 1; + } else + ap->nullfunc_ack = 0; + + if (sta_fw_ver == PRISM2_FW_VER(1,4,2)) { + printk(KERN_WARNING "%s: Warning: secondary station firmware " + "version 1.4.2 does not seem to work in Host AP mode\n", + ap->local->dev->name); + } +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_ap_tx_cb(struct sk_buff *skb, int ok, void *data) +{ + struct ap_data *ap = data; + struct ieee80211_hdr *hdr; + + if (!ap->local->hostapd || !ap->local->apdev) { + dev_kfree_skb(skb); + return; + } + + /* Pass the TX callback frame to the hostapd; use 802.11 header version + * 1 to indicate failure (no ACK) and 2 success (frame ACKed) */ + + hdr = (struct ieee80211_hdr *) skb->data; + hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_VERS); + hdr->frame_control |= cpu_to_le16(ok ? BIT(1) : BIT(0)); + + skb->dev = ap->local->apdev; + skb_pull(skb, hostap_80211_get_hdrlen(hdr->frame_control)); + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = cpu_to_be16(ETH_P_802_2); + memset(skb->cb, 0, sizeof(skb->cb)); + netif_rx(skb); +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +/* Called only as a tasklet (software IRQ) */ +static void hostap_ap_tx_cb_auth(struct sk_buff *skb, int ok, void *data) +{ + struct ap_data *ap = data; + struct net_device *dev = ap->local->dev; + struct ieee80211_hdr *hdr; + u16 auth_alg, auth_transaction, status; + __le16 *pos; + struct sta_info *sta = NULL; + char *txt = NULL; + + if (ap->local->hostapd) { + dev_kfree_skb(skb); + return; + } + + hdr = (struct ieee80211_hdr *) skb->data; + if (!ieee80211_is_auth(hdr->frame_control) || + skb->len < IEEE80211_MGMT_HDR_LEN + 6) { + printk(KERN_DEBUG "%s: hostap_ap_tx_cb_auth received invalid " + "frame\n", dev->name); + dev_kfree_skb(skb); + return; + } + + pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); + auth_alg = le16_to_cpu(*pos++); + auth_transaction = le16_to_cpu(*pos++); + status = le16_to_cpu(*pos++); + + if (!ok) { + txt = "frame was not ACKed"; + goto done; + } + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, hdr->addr1); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&ap->sta_table_lock); + + if (!sta) { + txt = "STA not found"; + goto done; + } + + if (status == WLAN_STATUS_SUCCESS && + ((auth_alg == WLAN_AUTH_OPEN && auth_transaction == 2) || + (auth_alg == WLAN_AUTH_SHARED_KEY && auth_transaction == 4))) { + txt = "STA authenticated"; + sta->flags |= WLAN_STA_AUTH; + sta->last_auth = jiffies; + } else if (status != WLAN_STATUS_SUCCESS) + txt = "authentication failed"; + + done: + if (sta) + atomic_dec(&sta->users); + if (txt) { + PDEBUG(DEBUG_AP, "%s: %pM auth_cb - alg=%d " + "trans#=%d status=%d - %s\n", + dev->name, hdr->addr1, + auth_alg, auth_transaction, status, txt); + } + dev_kfree_skb(skb); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_ap_tx_cb_assoc(struct sk_buff *skb, int ok, void *data) +{ + struct ap_data *ap = data; + struct net_device *dev = ap->local->dev; + struct ieee80211_hdr *hdr; + u16 status; + __le16 *pos; + struct sta_info *sta = NULL; + char *txt = NULL; + + if (ap->local->hostapd) { + dev_kfree_skb(skb); + return; + } + + hdr = (struct ieee80211_hdr *) skb->data; + if ((!ieee80211_is_assoc_resp(hdr->frame_control) && + !ieee80211_is_reassoc_resp(hdr->frame_control)) || + skb->len < IEEE80211_MGMT_HDR_LEN + 4) { + printk(KERN_DEBUG "%s: hostap_ap_tx_cb_assoc received invalid " + "frame\n", dev->name); + dev_kfree_skb(skb); + return; + } + + if (!ok) { + txt = "frame was not ACKed"; + goto done; + } + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, hdr->addr1); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&ap->sta_table_lock); + + if (!sta) { + txt = "STA not found"; + goto done; + } + + pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); + pos++; + status = le16_to_cpu(*pos++); + if (status == WLAN_STATUS_SUCCESS) { + if (!(sta->flags & WLAN_STA_ASSOC)) + hostap_event_new_sta(dev, sta); + txt = "STA associated"; + sta->flags |= WLAN_STA_ASSOC; + sta->last_assoc = jiffies; + } else + txt = "association failed"; + + done: + if (sta) + atomic_dec(&sta->users); + if (txt) { + PDEBUG(DEBUG_AP, "%s: %pM assoc_cb - %s\n", + dev->name, hdr->addr1, txt); + } + dev_kfree_skb(skb); +} + +/* Called only as a tasklet (software IRQ); TX callback for poll frames used + * in verifying whether the STA is still present. */ +static void hostap_ap_tx_cb_poll(struct sk_buff *skb, int ok, void *data) +{ + struct ap_data *ap = data; + struct ieee80211_hdr *hdr; + struct sta_info *sta; + + if (skb->len < 24) + goto fail; + hdr = (struct ieee80211_hdr *) skb->data; + if (ok) { + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, hdr->addr1); + if (sta) + sta->flags &= ~WLAN_STA_PENDING_POLL; + spin_unlock(&ap->sta_table_lock); + } else { + PDEBUG(DEBUG_AP, + "%s: STA %pM did not ACK activity poll frame\n", + ap->local->dev->name, hdr->addr1); + } + + fail: + dev_kfree_skb(skb); +} +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +void hostap_init_data(local_info_t *local) +{ + struct ap_data *ap = local->ap; + + if (ap == NULL) { + printk(KERN_WARNING "hostap_init_data: ap == NULL\n"); + return; + } + memset(ap, 0, sizeof(struct ap_data)); + ap->local = local; + + ap->ap_policy = GET_INT_PARM(other_ap_policy, local->card_idx); + ap->bridge_packets = GET_INT_PARM(ap_bridge_packets, local->card_idx); + ap->max_inactivity = + GET_INT_PARM(ap_max_inactivity, local->card_idx) * HZ; + ap->autom_ap_wds = GET_INT_PARM(autom_ap_wds, local->card_idx); + + spin_lock_init(&ap->sta_table_lock); + INIT_LIST_HEAD(&ap->sta_list); + + /* Initialize task queue structure for AP management */ + INIT_WORK(&local->ap->add_sta_proc_queue, handle_add_proc_queue); + + ap->tx_callback_idx = + hostap_tx_callback_register(local, hostap_ap_tx_cb, ap); + if (ap->tx_callback_idx == 0) + printk(KERN_WARNING "%s: failed to register TX callback for " + "AP\n", local->dev->name); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + INIT_WORK(&local->ap->wds_oper_queue, handle_wds_oper_queue); + + ap->tx_callback_auth = + hostap_tx_callback_register(local, hostap_ap_tx_cb_auth, ap); + ap->tx_callback_assoc = + hostap_tx_callback_register(local, hostap_ap_tx_cb_assoc, ap); + ap->tx_callback_poll = + hostap_tx_callback_register(local, hostap_ap_tx_cb_poll, ap); + if (ap->tx_callback_auth == 0 || ap->tx_callback_assoc == 0 || + ap->tx_callback_poll == 0) + printk(KERN_WARNING "%s: failed to register TX callback for " + "AP\n", local->dev->name); + + spin_lock_init(&ap->mac_restrictions.lock); + INIT_LIST_HEAD(&ap->mac_restrictions.mac_list); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + ap->initialized = 1; +} + + +void hostap_init_ap_proc(local_info_t *local) +{ + struct ap_data *ap = local->ap; + + ap->proc = local->proc; + if (ap->proc == NULL) + return; + +#ifndef PRISM2_NO_PROCFS_DEBUG + proc_create_data("ap_debug", 0, ap->proc, &ap_debug_proc_fops, ap); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + proc_create_data("ap_control", 0, ap->proc, &ap_control_proc_fops, ap); + proc_create_data("ap", 0, ap->proc, &prism2_ap_proc_fops, ap); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + +} + + +void hostap_free_data(struct ap_data *ap) +{ + struct sta_info *n, *sta; + + if (ap == NULL || !ap->initialized) { + printk(KERN_DEBUG "hostap_free_data: ap has not yet been " + "initialized - skip resource freeing\n"); + return; + } + + flush_work(&ap->add_sta_proc_queue); + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + flush_work(&ap->wds_oper_queue); + if (ap->crypt) + ap->crypt->deinit(ap->crypt_priv); + ap->crypt = ap->crypt_priv = NULL; +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + list_for_each_entry_safe(sta, n, &ap->sta_list, list) { + ap_sta_hash_del(ap, sta); + list_del(&sta->list); + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) + hostap_event_expired_sta(sta->local->dev, sta); + ap_free_sta(ap, sta); + } + +#ifndef PRISM2_NO_PROCFS_DEBUG + if (ap->proc != NULL) { + remove_proc_entry("ap_debug", ap->proc); + } +#endif /* PRISM2_NO_PROCFS_DEBUG */ + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (ap->proc != NULL) { + remove_proc_entry("ap", ap->proc); + remove_proc_entry("ap_control", ap->proc); + } + ap_control_flush_macs(&ap->mac_restrictions); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + ap->initialized = 0; +} + + +/* caller should have mutex for AP STA list handling */ +static struct sta_info* ap_get_sta(struct ap_data *ap, u8 *sta) +{ + struct sta_info *s; + + s = ap->sta_hash[STA_HASH(sta)]; + while (s != NULL && !ether_addr_equal(s->addr, sta)) + s = s->hnext; + return s; +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + +/* Called from timer handler and from scheduled AP queue handlers */ +static void prism2_send_mgmt(struct net_device *dev, + u16 type_subtype, char *body, + int body_len, u8 *addr, u16 tx_cb_idx) +{ + struct hostap_interface *iface; + local_info_t *local; + struct ieee80211_hdr *hdr; + u16 fc; + struct sk_buff *skb; + struct hostap_skb_tx_data *meta; + int hdrlen; + + iface = netdev_priv(dev); + local = iface->local; + dev = local->dev; /* always use master radio device */ + iface = netdev_priv(dev); + + if (!(dev->flags & IFF_UP)) { + PDEBUG(DEBUG_AP, "%s: prism2_send_mgmt - device is not UP - " + "cannot send frame\n", dev->name); + return; + } + + skb = dev_alloc_skb(sizeof(*hdr) + body_len); + if (skb == NULL) { + PDEBUG(DEBUG_AP, "%s: prism2_send_mgmt failed to allocate " + "skb\n", dev->name); + return; + } + + fc = type_subtype; + hdrlen = hostap_80211_get_hdrlen(cpu_to_le16(type_subtype)); + hdr = (struct ieee80211_hdr *) skb_put(skb, hdrlen); + if (body) + memcpy(skb_put(skb, body_len), body, body_len); + + memset(hdr, 0, hdrlen); + + /* FIX: ctrl::ack sending used special HFA384X_TX_CTRL_802_11 + * tx_control instead of using local->tx_control */ + + + memcpy(hdr->addr1, addr, ETH_ALEN); /* DA / RA */ + if (ieee80211_is_data(hdr->frame_control)) { + fc |= IEEE80211_FCTL_FROMDS; + memcpy(hdr->addr2, dev->dev_addr, ETH_ALEN); /* BSSID */ + memcpy(hdr->addr3, dev->dev_addr, ETH_ALEN); /* SA */ + } else if (ieee80211_is_ctl(hdr->frame_control)) { + /* control:ACK does not have addr2 or addr3 */ + eth_zero_addr(hdr->addr2); + eth_zero_addr(hdr->addr3); + } else { + memcpy(hdr->addr2, dev->dev_addr, ETH_ALEN); /* SA */ + memcpy(hdr->addr3, dev->dev_addr, ETH_ALEN); /* BSSID */ + } + + hdr->frame_control = cpu_to_le16(fc); + + meta = (struct hostap_skb_tx_data *) skb->cb; + memset(meta, 0, sizeof(*meta)); + meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; + meta->iface = iface; + meta->tx_cb_idx = tx_cb_idx; + + skb->dev = dev; + skb_reset_mac_header(skb); + skb_reset_network_header(skb); + dev_queue_xmit(skb); +} +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +static int prism2_sta_proc_show(struct seq_file *m, void *v) +{ + struct sta_info *sta = m->private; + int i; + + /* FIX: possible race condition.. the STA data could have just expired, + * but proc entry was still here so that the read could have started; + * some locking should be done here.. */ + + seq_printf(m, + "%s=%pM\nusers=%d\naid=%d\n" + "flags=0x%04x%s%s%s%s%s%s%s\n" + "capability=0x%02x\nlisten_interval=%d\nsupported_rates=", + sta->ap ? "AP" : "STA", + sta->addr, atomic_read(&sta->users), sta->aid, + sta->flags, + sta->flags & WLAN_STA_AUTH ? " AUTH" : "", + sta->flags & WLAN_STA_ASSOC ? " ASSOC" : "", + sta->flags & WLAN_STA_PS ? " PS" : "", + sta->flags & WLAN_STA_TIM ? " TIM" : "", + sta->flags & WLAN_STA_PERM ? " PERM" : "", + sta->flags & WLAN_STA_AUTHORIZED ? " AUTHORIZED" : "", + sta->flags & WLAN_STA_PENDING_POLL ? " POLL" : "", + sta->capability, sta->listen_interval); + /* supported_rates: 500 kbit/s units with msb ignored */ + for (i = 0; i < sizeof(sta->supported_rates); i++) + if (sta->supported_rates[i] != 0) + seq_printf(m, "%d%sMbps ", + (sta->supported_rates[i] & 0x7f) / 2, + sta->supported_rates[i] & 1 ? ".5" : ""); + seq_printf(m, + "\njiffies=%lu\nlast_auth=%lu\nlast_assoc=%lu\n" + "last_rx=%lu\nlast_tx=%lu\nrx_packets=%lu\n" + "tx_packets=%lu\n" + "rx_bytes=%lu\ntx_bytes=%lu\nbuffer_count=%d\n" + "last_rx: silence=%d dBm signal=%d dBm rate=%d%s Mbps\n" + "tx_rate=%d\ntx[1M]=%d\ntx[2M]=%d\ntx[5.5M]=%d\n" + "tx[11M]=%d\n" + "rx[1M]=%d\nrx[2M]=%d\nrx[5.5M]=%d\nrx[11M]=%d\n", + jiffies, sta->last_auth, sta->last_assoc, sta->last_rx, + sta->last_tx, + sta->rx_packets, sta->tx_packets, sta->rx_bytes, + sta->tx_bytes, skb_queue_len(&sta->tx_buf), + sta->last_rx_silence, + sta->last_rx_signal, sta->last_rx_rate / 10, + sta->last_rx_rate % 10 ? ".5" : "", + sta->tx_rate, sta->tx_count[0], sta->tx_count[1], + sta->tx_count[2], sta->tx_count[3], sta->rx_count[0], + sta->rx_count[1], sta->rx_count[2], sta->rx_count[3]); + if (sta->crypt && sta->crypt->ops && sta->crypt->ops->print_stats) + sta->crypt->ops->print_stats(m, sta->crypt->priv); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (sta->ap) { + if (sta->u.ap.channel >= 0) + seq_printf(m, "channel=%d\n", sta->u.ap.channel); + seq_puts(m, "ssid="); + for (i = 0; i < sta->u.ap.ssid_len; i++) { + if (sta->u.ap.ssid[i] >= 32 && sta->u.ap.ssid[i] < 127) + seq_putc(m, sta->u.ap.ssid[i]); + else + seq_printf(m, "<%02x>", sta->u.ap.ssid[i]); + } + seq_putc(m, '\n'); + } +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + return 0; +} + +static int prism2_sta_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, prism2_sta_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations prism2_sta_proc_fops = { + .open = prism2_sta_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void handle_add_proc_queue(struct work_struct *work) +{ + struct ap_data *ap = container_of(work, struct ap_data, + add_sta_proc_queue); + struct sta_info *sta; + char name[20]; + struct add_sta_proc_data *entry, *prev; + + entry = ap->add_sta_proc_entries; + ap->add_sta_proc_entries = NULL; + + while (entry) { + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, entry->addr); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&ap->sta_table_lock); + + if (sta) { + sprintf(name, "%pM", sta->addr); + sta->proc = proc_create_data( + name, 0, ap->proc, + &prism2_sta_proc_fops, sta); + + atomic_dec(&sta->users); + } + + prev = entry; + entry = entry->next; + kfree(prev); + } +} + + +static struct sta_info * ap_add_sta(struct ap_data *ap, u8 *addr) +{ + struct sta_info *sta; + + sta = kzalloc(sizeof(struct sta_info), GFP_ATOMIC); + if (sta == NULL) { + PDEBUG(DEBUG_AP, "AP: kmalloc failed\n"); + return NULL; + } + + /* initialize STA info data */ + sta->local = ap->local; + skb_queue_head_init(&sta->tx_buf); + memcpy(sta->addr, addr, ETH_ALEN); + + atomic_inc(&sta->users); + spin_lock_bh(&ap->sta_table_lock); + list_add(&sta->list, &ap->sta_list); + ap->num_sta++; + ap_sta_hash_add(ap, sta); + spin_unlock_bh(&ap->sta_table_lock); + + if (ap->proc) { + struct add_sta_proc_data *entry; + /* schedule a non-interrupt context process to add a procfs + * entry for the STA since procfs code use GFP_KERNEL */ + entry = kmalloc(sizeof(*entry), GFP_ATOMIC); + if (entry) { + memcpy(entry->addr, sta->addr, ETH_ALEN); + entry->next = ap->add_sta_proc_entries; + ap->add_sta_proc_entries = entry; + schedule_work(&ap->add_sta_proc_queue); + } else + printk(KERN_DEBUG "Failed to add STA proc data\n"); + } + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + init_timer(&sta->timer); + sta->timer.expires = jiffies + ap->max_inactivity; + sta->timer.data = (unsigned long) sta; + sta->timer.function = ap_handle_timer; + if (!ap->local->hostapd) + add_timer(&sta->timer); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + return sta; +} + + +static int ap_tx_rate_ok(int rateidx, struct sta_info *sta, + local_info_t *local) +{ + if (rateidx > sta->tx_max_rate || + !(sta->tx_supp_rates & (1 << rateidx))) + return 0; + + if (local->tx_rate_control != 0 && + !(local->tx_rate_control & (1 << rateidx))) + return 0; + + return 1; +} + + +static void prism2_check_tx_rates(struct sta_info *sta) +{ + int i; + + sta->tx_supp_rates = 0; + for (i = 0; i < sizeof(sta->supported_rates); i++) { + if ((sta->supported_rates[i] & 0x7f) == 2) + sta->tx_supp_rates |= WLAN_RATE_1M; + if ((sta->supported_rates[i] & 0x7f) == 4) + sta->tx_supp_rates |= WLAN_RATE_2M; + if ((sta->supported_rates[i] & 0x7f) == 11) + sta->tx_supp_rates |= WLAN_RATE_5M5; + if ((sta->supported_rates[i] & 0x7f) == 22) + sta->tx_supp_rates |= WLAN_RATE_11M; + } + sta->tx_max_rate = sta->tx_rate = sta->tx_rate_idx = 0; + if (sta->tx_supp_rates & WLAN_RATE_1M) { + sta->tx_max_rate = 0; + if (ap_tx_rate_ok(0, sta, sta->local)) { + sta->tx_rate = 10; + sta->tx_rate_idx = 0; + } + } + if (sta->tx_supp_rates & WLAN_RATE_2M) { + sta->tx_max_rate = 1; + if (ap_tx_rate_ok(1, sta, sta->local)) { + sta->tx_rate = 20; + sta->tx_rate_idx = 1; + } + } + if (sta->tx_supp_rates & WLAN_RATE_5M5) { + sta->tx_max_rate = 2; + if (ap_tx_rate_ok(2, sta, sta->local)) { + sta->tx_rate = 55; + sta->tx_rate_idx = 2; + } + } + if (sta->tx_supp_rates & WLAN_RATE_11M) { + sta->tx_max_rate = 3; + if (ap_tx_rate_ok(3, sta, sta->local)) { + sta->tx_rate = 110; + sta->tx_rate_idx = 3; + } + } +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + +static void ap_crypt_init(struct ap_data *ap) +{ + ap->crypt = lib80211_get_crypto_ops("WEP"); + + if (ap->crypt) { + if (ap->crypt->init) { + ap->crypt_priv = ap->crypt->init(0); + if (ap->crypt_priv == NULL) + ap->crypt = NULL; + else { + u8 key[WEP_KEY_LEN]; + get_random_bytes(key, WEP_KEY_LEN); + ap->crypt->set_key(key, WEP_KEY_LEN, NULL, + ap->crypt_priv); + } + } + } + + if (ap->crypt == NULL) { + printk(KERN_WARNING "AP could not initialize WEP: load module " + "lib80211_crypt_wep.ko\n"); + } +} + + +/* Generate challenge data for shared key authentication. IEEE 802.11 specifies + * that WEP algorithm is used for generating challenge. This should be unique, + * but otherwise there is not really need for randomness etc. Initialize WEP + * with pseudo random key and then use increasing IV to get unique challenge + * streams. + * + * Called only as a scheduled task for pending AP frames. + */ +static char * ap_auth_make_challenge(struct ap_data *ap) +{ + char *tmpbuf; + struct sk_buff *skb; + + if (ap->crypt == NULL) { + ap_crypt_init(ap); + if (ap->crypt == NULL) + return NULL; + } + + tmpbuf = kmalloc(WLAN_AUTH_CHALLENGE_LEN, GFP_ATOMIC); + if (tmpbuf == NULL) { + PDEBUG(DEBUG_AP, "AP: kmalloc failed for challenge\n"); + return NULL; + } + + skb = dev_alloc_skb(WLAN_AUTH_CHALLENGE_LEN + + ap->crypt->extra_mpdu_prefix_len + + ap->crypt->extra_mpdu_postfix_len); + if (skb == NULL) { + kfree(tmpbuf); + return NULL; + } + + skb_reserve(skb, ap->crypt->extra_mpdu_prefix_len); + memset(skb_put(skb, WLAN_AUTH_CHALLENGE_LEN), 0, + WLAN_AUTH_CHALLENGE_LEN); + if (ap->crypt->encrypt_mpdu(skb, 0, ap->crypt_priv)) { + dev_kfree_skb(skb); + kfree(tmpbuf); + return NULL; + } + + skb_copy_from_linear_data_offset(skb, ap->crypt->extra_mpdu_prefix_len, + tmpbuf, WLAN_AUTH_CHALLENGE_LEN); + dev_kfree_skb(skb); + + return tmpbuf; +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_authen(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct net_device *dev = local->dev; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + size_t hdrlen; + struct ap_data *ap = local->ap; + char body[8 + WLAN_AUTH_CHALLENGE_LEN], *challenge = NULL; + int len, olen; + u16 auth_alg, auth_transaction, status_code; + __le16 *pos; + u16 resp = WLAN_STATUS_SUCCESS; + struct sta_info *sta = NULL; + struct lib80211_crypt_data *crypt; + char *txt = ""; + + len = skb->len - IEEE80211_MGMT_HDR_LEN; + + hdrlen = hostap_80211_get_hdrlen(hdr->frame_control); + + if (len < 6) { + PDEBUG(DEBUG_AP, "%s: handle_authen - too short payload " + "(len=%d) from %pM\n", dev->name, len, hdr->addr2); + return; + } + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&local->ap->sta_table_lock); + + if (sta && sta->crypt) + crypt = sta->crypt; + else { + int idx = 0; + if (skb->len >= hdrlen + 3) + idx = skb->data[hdrlen + 3] >> 6; + crypt = local->crypt_info.crypt[idx]; + } + + pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); + auth_alg = __le16_to_cpu(*pos); + pos++; + auth_transaction = __le16_to_cpu(*pos); + pos++; + status_code = __le16_to_cpu(*pos); + pos++; + + if (ether_addr_equal(dev->dev_addr, hdr->addr2) || + ap_control_mac_deny(&ap->mac_restrictions, hdr->addr2)) { + txt = "authentication denied"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + + if (((local->auth_algs & PRISM2_AUTH_OPEN) && + auth_alg == WLAN_AUTH_OPEN) || + ((local->auth_algs & PRISM2_AUTH_SHARED_KEY) && + crypt && auth_alg == WLAN_AUTH_SHARED_KEY)) { + } else { + txt = "unsupported algorithm"; + resp = WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG; + goto fail; + } + + if (len >= 8) { + u8 *u = (u8 *) pos; + if (*u == WLAN_EID_CHALLENGE) { + if (*(u + 1) != WLAN_AUTH_CHALLENGE_LEN) { + txt = "invalid challenge len"; + resp = WLAN_STATUS_CHALLENGE_FAIL; + goto fail; + } + if (len - 8 < WLAN_AUTH_CHALLENGE_LEN) { + txt = "challenge underflow"; + resp = WLAN_STATUS_CHALLENGE_FAIL; + goto fail; + } + challenge = (char *) (u + 2); + } + } + + if (sta && sta->ap) { + if (time_after(jiffies, sta->u.ap.last_beacon + + (10 * sta->listen_interval * HZ) / 1024)) { + PDEBUG(DEBUG_AP, "%s: no beacons received for a while," + " assuming AP %pM is now STA\n", + dev->name, sta->addr); + sta->ap = 0; + sta->flags = 0; + sta->u.sta.challenge = NULL; + } else { + txt = "AP trying to authenticate?"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + } + + if ((auth_alg == WLAN_AUTH_OPEN && auth_transaction == 1) || + (auth_alg == WLAN_AUTH_SHARED_KEY && + (auth_transaction == 1 || + (auth_transaction == 3 && sta != NULL && + sta->u.sta.challenge != NULL)))) { + } else { + txt = "unknown authentication transaction number"; + resp = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; + goto fail; + } + + if (sta == NULL) { + txt = "new STA"; + + if (local->ap->num_sta >= MAX_STA_COUNT) { + /* FIX: might try to remove some old STAs first? */ + txt = "no more room for new STAs"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + + sta = ap_add_sta(local->ap, hdr->addr2); + if (sta == NULL) { + txt = "ap_add_sta failed"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + } + + switch (auth_alg) { + case WLAN_AUTH_OPEN: + txt = "authOK"; + /* IEEE 802.11 standard is not completely clear about + * whether STA is considered authenticated after + * authentication OK frame has been send or after it + * has been ACKed. In order to reduce interoperability + * issues, mark the STA authenticated before ACK. */ + sta->flags |= WLAN_STA_AUTH; + break; + + case WLAN_AUTH_SHARED_KEY: + if (auth_transaction == 1) { + if (sta->u.sta.challenge == NULL) { + sta->u.sta.challenge = + ap_auth_make_challenge(local->ap); + if (sta->u.sta.challenge == NULL) { + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + } + } else { + if (sta->u.sta.challenge == NULL || + challenge == NULL || + memcmp(sta->u.sta.challenge, challenge, + WLAN_AUTH_CHALLENGE_LEN) != 0 || + !ieee80211_has_protected(hdr->frame_control)) { + txt = "challenge response incorrect"; + resp = WLAN_STATUS_CHALLENGE_FAIL; + goto fail; + } + + txt = "challenge OK - authOK"; + /* IEEE 802.11 standard is not completely clear about + * whether STA is considered authenticated after + * authentication OK frame has been send or after it + * has been ACKed. In order to reduce interoperability + * issues, mark the STA authenticated before ACK. */ + sta->flags |= WLAN_STA_AUTH; + kfree(sta->u.sta.challenge); + sta->u.sta.challenge = NULL; + } + break; + } + + fail: + pos = (__le16 *) body; + *pos = cpu_to_le16(auth_alg); + pos++; + *pos = cpu_to_le16(auth_transaction + 1); + pos++; + *pos = cpu_to_le16(resp); /* status_code */ + pos++; + olen = 6; + + if (resp == WLAN_STATUS_SUCCESS && sta != NULL && + sta->u.sta.challenge != NULL && + auth_alg == WLAN_AUTH_SHARED_KEY && auth_transaction == 1) { + u8 *tmp = (u8 *) pos; + *tmp++ = WLAN_EID_CHALLENGE; + *tmp++ = WLAN_AUTH_CHALLENGE_LEN; + pos++; + memcpy(pos, sta->u.sta.challenge, WLAN_AUTH_CHALLENGE_LEN); + olen += 2 + WLAN_AUTH_CHALLENGE_LEN; + } + + prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH, + body, olen, hdr->addr2, ap->tx_callback_auth); + + if (sta) { + sta->last_rx = jiffies; + atomic_dec(&sta->users); + } + + if (resp) { + PDEBUG(DEBUG_AP, "%s: %pM auth (alg=%d " + "trans#=%d stat=%d len=%d fc=%04x) ==> %d (%s)\n", + dev->name, hdr->addr2, + auth_alg, auth_transaction, status_code, len, + le16_to_cpu(hdr->frame_control), resp, txt); + } +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_assoc(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, int reassoc) +{ + struct net_device *dev = local->dev; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + char body[12], *p, *lpos; + int len, left; + __le16 *pos; + u16 resp = WLAN_STATUS_SUCCESS; + struct sta_info *sta = NULL; + int send_deauth = 0; + char *txt = ""; + u8 prev_ap[ETH_ALEN]; + + left = len = skb->len - IEEE80211_MGMT_HDR_LEN; + + if (len < (reassoc ? 10 : 4)) { + PDEBUG(DEBUG_AP, "%s: handle_assoc - too short payload " + "(len=%d, reassoc=%d) from %pM\n", + dev->name, len, reassoc, hdr->addr2); + return; + } + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta == NULL || (sta->flags & WLAN_STA_AUTH) == 0) { + spin_unlock_bh(&local->ap->sta_table_lock); + txt = "trying to associate before authentication"; + send_deauth = 1; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + sta = NULL; /* do not decrement sta->users */ + goto fail; + } + atomic_inc(&sta->users); + spin_unlock_bh(&local->ap->sta_table_lock); + + pos = (__le16 *) (skb->data + IEEE80211_MGMT_HDR_LEN); + sta->capability = __le16_to_cpu(*pos); + pos++; left -= 2; + sta->listen_interval = __le16_to_cpu(*pos); + pos++; left -= 2; + + if (reassoc) { + memcpy(prev_ap, pos, ETH_ALEN); + pos++; pos++; pos++; left -= 6; + } else + eth_zero_addr(prev_ap); + + if (left >= 2) { + unsigned int ileft; + unsigned char *u = (unsigned char *) pos; + + if (*u == WLAN_EID_SSID) { + u++; left--; + ileft = *u; + u++; left--; + + if (ileft > left || ileft > MAX_SSID_LEN) { + txt = "SSID overflow"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + + if (ileft != strlen(local->essid) || + memcmp(local->essid, u, ileft) != 0) { + txt = "not our SSID"; + resp = WLAN_STATUS_ASSOC_DENIED_UNSPEC; + goto fail; + } + + u += ileft; + left -= ileft; + } + + if (left >= 2 && *u == WLAN_EID_SUPP_RATES) { + u++; left--; + ileft = *u; + u++; left--; + + if (ileft > left || ileft == 0 || + ileft > WLAN_SUPP_RATES_MAX) { + txt = "SUPP_RATES len error"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + + memset(sta->supported_rates, 0, + sizeof(sta->supported_rates)); + memcpy(sta->supported_rates, u, ileft); + prism2_check_tx_rates(sta); + + u += ileft; + left -= ileft; + } + + if (left > 0) { + PDEBUG(DEBUG_AP, "%s: assoc from %pM" + " with extra data (%d bytes) [", + dev->name, hdr->addr2, left); + while (left > 0) { + PDEBUG2(DEBUG_AP, "<%02x>", *u); + u++; left--; + } + PDEBUG2(DEBUG_AP, "]\n"); + } + } else { + txt = "frame underflow"; + resp = WLAN_STATUS_UNSPECIFIED_FAILURE; + goto fail; + } + + /* get a unique AID */ + if (sta->aid > 0) + txt = "OK, old AID"; + else { + spin_lock_bh(&local->ap->sta_table_lock); + for (sta->aid = 1; sta->aid <= MAX_AID_TABLE_SIZE; sta->aid++) + if (local->ap->sta_aid[sta->aid - 1] == NULL) + break; + if (sta->aid > MAX_AID_TABLE_SIZE) { + sta->aid = 0; + spin_unlock_bh(&local->ap->sta_table_lock); + resp = WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA; + txt = "no room for more AIDs"; + } else { + local->ap->sta_aid[sta->aid - 1] = sta; + spin_unlock_bh(&local->ap->sta_table_lock); + txt = "OK, new AID"; + } + } + + fail: + pos = (__le16 *) body; + + if (send_deauth) { + *pos = cpu_to_le16(WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH); + pos++; + } else { + /* FIX: CF-Pollable and CF-PollReq should be set to match the + * values in beacons/probe responses */ + /* FIX: how about privacy and WEP? */ + /* capability */ + *pos = cpu_to_le16(WLAN_CAPABILITY_ESS); + pos++; + + /* status_code */ + *pos = cpu_to_le16(resp); + pos++; + + *pos = cpu_to_le16((sta && sta->aid > 0 ? sta->aid : 0) | + BIT(14) | BIT(15)); /* AID */ + pos++; + + /* Supported rates (Information element) */ + p = (char *) pos; + *p++ = WLAN_EID_SUPP_RATES; + lpos = p; + *p++ = 0; /* len */ + if (local->tx_rate_control & WLAN_RATE_1M) { + *p++ = local->basic_rates & WLAN_RATE_1M ? 0x82 : 0x02; + (*lpos)++; + } + if (local->tx_rate_control & WLAN_RATE_2M) { + *p++ = local->basic_rates & WLAN_RATE_2M ? 0x84 : 0x04; + (*lpos)++; + } + if (local->tx_rate_control & WLAN_RATE_5M5) { + *p++ = local->basic_rates & WLAN_RATE_5M5 ? + 0x8b : 0x0b; + (*lpos)++; + } + if (local->tx_rate_control & WLAN_RATE_11M) { + *p++ = local->basic_rates & WLAN_RATE_11M ? + 0x96 : 0x16; + (*lpos)++; + } + pos = (__le16 *) p; + } + + prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | + (send_deauth ? IEEE80211_STYPE_DEAUTH : + (reassoc ? IEEE80211_STYPE_REASSOC_RESP : + IEEE80211_STYPE_ASSOC_RESP)), + body, (u8 *) pos - (u8 *) body, + hdr->addr2, + send_deauth ? 0 : local->ap->tx_callback_assoc); + + if (sta) { + if (resp == WLAN_STATUS_SUCCESS) { + sta->last_rx = jiffies; + /* STA will be marked associated from TX callback, if + * AssocResp is ACKed */ + } + atomic_dec(&sta->users); + } + +#if 0 + PDEBUG(DEBUG_AP, "%s: %pM %sassoc (len=%d " + "prev_ap=%pM) => %d(%d) (%s)\n", + dev->name, + hdr->addr2, + reassoc ? "re" : "", len, + prev_ap, + resp, send_deauth, txt); +#endif +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_deauth(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct net_device *dev = local->dev; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + char *body = (char *) (skb->data + IEEE80211_MGMT_HDR_LEN); + int len; + u16 reason_code; + __le16 *pos; + struct sta_info *sta = NULL; + + len = skb->len - IEEE80211_MGMT_HDR_LEN; + + if (len < 2) { + printk("handle_deauth - too short payload (len=%d)\n", len); + return; + } + + pos = (__le16 *) body; + reason_code = le16_to_cpu(*pos); + + PDEBUG(DEBUG_AP, "%s: deauthentication: %pM len=%d, " + "reason_code=%d\n", dev->name, hdr->addr2, + len, reason_code); + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta != NULL) { + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap) + hostap_event_expired_sta(local->dev, sta); + sta->flags &= ~(WLAN_STA_AUTH | WLAN_STA_ASSOC); + } + spin_unlock_bh(&local->ap->sta_table_lock); + if (sta == NULL) { + printk("%s: deauthentication from %pM, " + "reason_code=%d, but STA not authenticated\n", dev->name, + hdr->addr2, reason_code); + } +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_disassoc(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct net_device *dev = local->dev; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + char *body = skb->data + IEEE80211_MGMT_HDR_LEN; + int len; + u16 reason_code; + __le16 *pos; + struct sta_info *sta = NULL; + + len = skb->len - IEEE80211_MGMT_HDR_LEN; + + if (len < 2) { + printk("handle_disassoc - too short payload (len=%d)\n", len); + return; + } + + pos = (__le16 *) body; + reason_code = le16_to_cpu(*pos); + + PDEBUG(DEBUG_AP, "%s: disassociation: %pM len=%d, " + "reason_code=%d\n", dev->name, hdr->addr2, + len, reason_code); + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta != NULL) { + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap) + hostap_event_expired_sta(local->dev, sta); + sta->flags &= ~WLAN_STA_ASSOC; + } + spin_unlock_bh(&local->ap->sta_table_lock); + if (sta == NULL) { + printk("%s: disassociation from %pM, " + "reason_code=%d, but STA not authenticated\n", + dev->name, hdr->addr2, reason_code); + } +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void ap_handle_data_nullfunc(local_info_t *local, + struct ieee80211_hdr *hdr) +{ + struct net_device *dev = local->dev; + + /* some STA f/w's seem to require control::ACK frame for + * data::nullfunc, but at least Prism2 station f/w version 0.8.0 does + * not send this.. + * send control::ACK for the data::nullfunc */ + + printk(KERN_DEBUG "Sending control::ACK for data::nullfunc\n"); + prism2_send_mgmt(dev, IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK, + NULL, 0, hdr->addr2, 0); +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void ap_handle_dropped_data(local_info_t *local, + struct ieee80211_hdr *hdr) +{ + struct net_device *dev = local->dev; + struct sta_info *sta; + __le16 reason; + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&local->ap->sta_table_lock); + + if (sta != NULL && (sta->flags & WLAN_STA_ASSOC)) { + PDEBUG(DEBUG_AP, "ap_handle_dropped_data: STA is now okay?\n"); + atomic_dec(&sta->users); + return; + } + + reason = cpu_to_le16(WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA); + prism2_send_mgmt(dev, IEEE80211_FTYPE_MGMT | + ((sta == NULL || !(sta->flags & WLAN_STA_ASSOC)) ? + IEEE80211_STYPE_DEAUTH : IEEE80211_STYPE_DISASSOC), + (char *) &reason, sizeof(reason), hdr->addr2, 0); + + if (sta) + atomic_dec(&sta->users); +} + +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +/* Called only as a scheduled task for pending AP frames. */ +static void pspoll_send_buffered(local_info_t *local, struct sta_info *sta, + struct sk_buff *skb) +{ + struct hostap_skb_tx_data *meta; + + if (!(sta->flags & WLAN_STA_PS)) { + /* Station has moved to non-PS mode, so send all buffered + * frames using normal device queue. */ + dev_queue_xmit(skb); + return; + } + + /* add a flag for hostap_handle_sta_tx() to know that this skb should + * be passed through even though STA is using PS */ + meta = (struct hostap_skb_tx_data *) skb->cb; + meta->flags |= HOSTAP_TX_FLAGS_BUFFERED_FRAME; + if (!skb_queue_empty(&sta->tx_buf)) { + /* indicate to STA that more frames follow */ + meta->flags |= HOSTAP_TX_FLAGS_ADD_MOREDATA; + } + dev_queue_xmit(skb); +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_pspoll(local_info_t *local, + struct ieee80211_hdr *hdr, + struct hostap_80211_rx_status *rx_stats) +{ + struct net_device *dev = local->dev; + struct sta_info *sta; + u16 aid; + struct sk_buff *skb; + + PDEBUG(DEBUG_PS2, "handle_pspoll: BSSID=%pM, TA=%pM PWRMGT=%d\n", + hdr->addr1, hdr->addr2, !!ieee80211_has_pm(hdr->frame_control)); + + if (!ether_addr_equal(hdr->addr1, dev->dev_addr)) { + PDEBUG(DEBUG_AP, + "handle_pspoll - addr1(BSSID)=%pM not own MAC\n", + hdr->addr1); + return; + } + + aid = le16_to_cpu(hdr->duration_id); + if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14))) { + PDEBUG(DEBUG_PS, " PSPOLL and AID[15:14] not set\n"); + return; + } + aid &= ~(BIT(15) | BIT(14)); + if (aid == 0 || aid > MAX_AID_TABLE_SIZE) { + PDEBUG(DEBUG_PS, " invalid aid=%d\n", aid); + return; + } + PDEBUG(DEBUG_PS2, " aid=%d\n", aid); + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&local->ap->sta_table_lock); + + if (sta == NULL) { + PDEBUG(DEBUG_PS, " STA not found\n"); + return; + } + if (sta->aid != aid) { + PDEBUG(DEBUG_PS, " received aid=%i does not match with " + "assoc.aid=%d\n", aid, sta->aid); + return; + } + + /* FIX: todo: + * - add timeout for buffering (clear aid in TIM vector if buffer timed + * out (expiry time must be longer than ListenInterval for + * the corresponding STA; "8802-11: 11.2.1.9 AP aging function" + * - what to do, if buffered, pspolled, and sent frame is not ACKed by + * sta; store buffer for later use and leave TIM aid bit set? use + * TX event to check whether frame was ACKed? + */ + + while ((skb = skb_dequeue(&sta->tx_buf)) != NULL) { + /* send buffered frame .. */ + PDEBUG(DEBUG_PS2, "Sending buffered frame to STA after PS POLL" + " (buffer_count=%d)\n", skb_queue_len(&sta->tx_buf)); + + pspoll_send_buffered(local, sta, skb); + + if (sta->flags & WLAN_STA_PS) { + /* send only one buffered packet per PS Poll */ + /* FIX: should ignore further PS Polls until the + * buffered packet that was just sent is acknowledged + * (Tx or TxExc event) */ + break; + } + } + + if (skb_queue_empty(&sta->tx_buf)) { + /* try to clear aid from TIM */ + if (!(sta->flags & WLAN_STA_TIM)) + PDEBUG(DEBUG_PS2, "Re-unsetting TIM for aid %d\n", + aid); + hostap_set_tim(local, aid, 0); + sta->flags &= ~WLAN_STA_TIM; + } + + atomic_dec(&sta->users); +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + +static void handle_wds_oper_queue(struct work_struct *work) +{ + struct ap_data *ap = container_of(work, struct ap_data, + wds_oper_queue); + local_info_t *local = ap->local; + struct wds_oper_data *entry, *prev; + + spin_lock_bh(&local->lock); + entry = local->ap->wds_oper_entries; + local->ap->wds_oper_entries = NULL; + spin_unlock_bh(&local->lock); + + while (entry) { + PDEBUG(DEBUG_AP, "%s: %s automatic WDS connection " + "to AP %pM\n", + local->dev->name, + entry->type == WDS_ADD ? "adding" : "removing", + entry->addr); + if (entry->type == WDS_ADD) + prism2_wds_add(local, entry->addr, 0); + else if (entry->type == WDS_DEL) + prism2_wds_del(local, entry->addr, 0, 1); + + prev = entry; + entry = entry->next; + kfree(prev); + } +} + + +/* Called only as a scheduled task for pending AP frames. */ +static void handle_beacon(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + char *body = skb->data + IEEE80211_MGMT_HDR_LEN; + int len, left; + u16 beacon_int, capability; + __le16 *pos; + char *ssid = NULL; + unsigned char *supp_rates = NULL; + int ssid_len = 0, supp_rates_len = 0; + struct sta_info *sta = NULL; + int new_sta = 0, channel = -1; + + len = skb->len - IEEE80211_MGMT_HDR_LEN; + + if (len < 8 + 2 + 2) { + printk(KERN_DEBUG "handle_beacon - too short payload " + "(len=%d)\n", len); + return; + } + + pos = (__le16 *) body; + left = len; + + /* Timestamp (8 octets) */ + pos += 4; left -= 8; + /* Beacon interval (2 octets) */ + beacon_int = le16_to_cpu(*pos); + pos++; left -= 2; + /* Capability information (2 octets) */ + capability = le16_to_cpu(*pos); + pos++; left -= 2; + + if (local->ap->ap_policy != AP_OTHER_AP_EVEN_IBSS && + capability & WLAN_CAPABILITY_IBSS) + return; + + if (left >= 2) { + unsigned int ileft; + unsigned char *u = (unsigned char *) pos; + + if (*u == WLAN_EID_SSID) { + u++; left--; + ileft = *u; + u++; left--; + + if (ileft > left || ileft > MAX_SSID_LEN) { + PDEBUG(DEBUG_AP, "SSID: overflow\n"); + return; + } + + if (local->ap->ap_policy == AP_OTHER_AP_SAME_SSID && + (ileft != strlen(local->essid) || + memcmp(local->essid, u, ileft) != 0)) { + /* not our SSID */ + return; + } + + ssid = u; + ssid_len = ileft; + + u += ileft; + left -= ileft; + } + + if (*u == WLAN_EID_SUPP_RATES) { + u++; left--; + ileft = *u; + u++; left--; + + if (ileft > left || ileft == 0 || ileft > 8) { + PDEBUG(DEBUG_AP, " - SUPP_RATES len error\n"); + return; + } + + supp_rates = u; + supp_rates_len = ileft; + + u += ileft; + left -= ileft; + } + + if (*u == WLAN_EID_DS_PARAMS) { + u++; left--; + ileft = *u; + u++; left--; + + if (ileft > left || ileft != 1) { + PDEBUG(DEBUG_AP, " - DS_PARAMS len error\n"); + return; + } + + channel = *u; + + u += ileft; + left -= ileft; + } + } + + spin_lock_bh(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta != NULL) + atomic_inc(&sta->users); + spin_unlock_bh(&local->ap->sta_table_lock); + + if (sta == NULL) { + /* add new AP */ + new_sta = 1; + sta = ap_add_sta(local->ap, hdr->addr2); + if (sta == NULL) { + printk(KERN_INFO "prism2: kmalloc failed for AP " + "data structure\n"); + return; + } + hostap_event_new_sta(local->dev, sta); + + /* mark APs authentication and associated for pseudo ad-hoc + * style communication */ + sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC; + + if (local->ap->autom_ap_wds) { + hostap_wds_link_oper(local, sta->addr, WDS_ADD); + } + } + + sta->ap = 1; + if (ssid) { + sta->u.ap.ssid_len = ssid_len; + memcpy(sta->u.ap.ssid, ssid, ssid_len); + sta->u.ap.ssid[ssid_len] = '\0'; + } else { + sta->u.ap.ssid_len = 0; + sta->u.ap.ssid[0] = '\0'; + } + sta->u.ap.channel = channel; + sta->rx_packets++; + sta->rx_bytes += len; + sta->u.ap.last_beacon = sta->last_rx = jiffies; + sta->capability = capability; + sta->listen_interval = beacon_int; + + atomic_dec(&sta->users); + + if (new_sta) { + memset(sta->supported_rates, 0, sizeof(sta->supported_rates)); + memcpy(sta->supported_rates, supp_rates, supp_rates_len); + prism2_check_tx_rates(sta); + } +} + +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +/* Called only as a tasklet. */ +static void handle_ap_item(local_info_t *local, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + struct net_device *dev = local->dev; +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + u16 fc, type, stype; + struct ieee80211_hdr *hdr; + + /* FIX: should give skb->len to handler functions and check that the + * buffer is long enough */ + hdr = (struct ieee80211_hdr *) skb->data; + fc = le16_to_cpu(hdr->frame_control); + type = fc & IEEE80211_FCTL_FTYPE; + stype = fc & IEEE80211_FCTL_STYPE; + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (!local->hostapd && type == IEEE80211_FTYPE_DATA) { + PDEBUG(DEBUG_AP, "handle_ap_item - data frame\n"); + + if (!(fc & IEEE80211_FCTL_TODS) || + (fc & IEEE80211_FCTL_FROMDS)) { + if (stype == IEEE80211_STYPE_NULLFUNC) { + /* no ToDS nullfunc seems to be used to check + * AP association; so send reject message to + * speed up re-association */ + ap_handle_dropped_data(local, hdr); + goto done; + } + PDEBUG(DEBUG_AP, " not ToDS frame (fc=0x%04x)\n", + fc); + goto done; + } + + if (!ether_addr_equal(hdr->addr1, dev->dev_addr)) { + PDEBUG(DEBUG_AP, "handle_ap_item - addr1(BSSID)=%pM" + " not own MAC\n", hdr->addr1); + goto done; + } + + if (local->ap->nullfunc_ack && + stype == IEEE80211_STYPE_NULLFUNC) + ap_handle_data_nullfunc(local, hdr); + else + ap_handle_dropped_data(local, hdr); + goto done; + } + + if (type == IEEE80211_FTYPE_MGMT && stype == IEEE80211_STYPE_BEACON) { + handle_beacon(local, skb, rx_stats); + goto done; + } +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + if (type == IEEE80211_FTYPE_CTL && stype == IEEE80211_STYPE_PSPOLL) { + handle_pspoll(local, hdr, rx_stats); + goto done; + } + + if (local->hostapd) { + PDEBUG(DEBUG_AP, "Unknown frame in AP queue: type=0x%02x " + "subtype=0x%02x\n", type, stype); + goto done; + } + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (type != IEEE80211_FTYPE_MGMT) { + PDEBUG(DEBUG_AP, "handle_ap_item - not a management frame?\n"); + goto done; + } + + if (!ether_addr_equal(hdr->addr1, dev->dev_addr)) { + PDEBUG(DEBUG_AP, "handle_ap_item - addr1(DA)=%pM" + " not own MAC\n", hdr->addr1); + goto done; + } + + if (!ether_addr_equal(hdr->addr3, dev->dev_addr)) { + PDEBUG(DEBUG_AP, "handle_ap_item - addr3(BSSID)=%pM" + " not own MAC\n", hdr->addr3); + goto done; + } + + switch (stype) { + case IEEE80211_STYPE_ASSOC_REQ: + handle_assoc(local, skb, rx_stats, 0); + break; + case IEEE80211_STYPE_ASSOC_RESP: + PDEBUG(DEBUG_AP, "==> ASSOC RESP (ignored)\n"); + break; + case IEEE80211_STYPE_REASSOC_REQ: + handle_assoc(local, skb, rx_stats, 1); + break; + case IEEE80211_STYPE_REASSOC_RESP: + PDEBUG(DEBUG_AP, "==> REASSOC RESP (ignored)\n"); + break; + case IEEE80211_STYPE_ATIM: + PDEBUG(DEBUG_AP, "==> ATIM (ignored)\n"); + break; + case IEEE80211_STYPE_DISASSOC: + handle_disassoc(local, skb, rx_stats); + break; + case IEEE80211_STYPE_AUTH: + handle_authen(local, skb, rx_stats); + break; + case IEEE80211_STYPE_DEAUTH: + handle_deauth(local, skb, rx_stats); + break; + default: + PDEBUG(DEBUG_AP, "Unknown mgmt frame subtype 0x%02x\n", + stype >> 4); + break; + } +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + done: + dev_kfree_skb(skb); +} + + +/* Called only as a tasklet (software IRQ) */ +void hostap_rx(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats) +{ + struct hostap_interface *iface; + local_info_t *local; + struct ieee80211_hdr *hdr; + + iface = netdev_priv(dev); + local = iface->local; + + if (skb->len < 16) + goto drop; + + dev->stats.rx_packets++; + + hdr = (struct ieee80211_hdr *) skb->data; + + if (local->ap->ap_policy == AP_OTHER_AP_SKIP_ALL && + ieee80211_is_beacon(hdr->frame_control)) + goto drop; + + skb->protocol = cpu_to_be16(ETH_P_HOSTAP); + handle_ap_item(local, skb, rx_stats); + return; + + drop: + dev_kfree_skb(skb); +} + + +/* Called only as a tasklet (software IRQ) */ +static void schedule_packet_send(local_info_t *local, struct sta_info *sta) +{ + struct sk_buff *skb; + struct ieee80211_hdr *hdr; + struct hostap_80211_rx_status rx_stats; + + if (skb_queue_empty(&sta->tx_buf)) + return; + + skb = dev_alloc_skb(16); + if (skb == NULL) { + printk(KERN_DEBUG "%s: schedule_packet_send: skb alloc " + "failed\n", local->dev->name); + return; + } + + hdr = (struct ieee80211_hdr *) skb_put(skb, 16); + + /* Generate a fake pspoll frame to start packet delivery */ + hdr->frame_control = cpu_to_le16( + IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL); + memcpy(hdr->addr1, local->dev->dev_addr, ETH_ALEN); + memcpy(hdr->addr2, sta->addr, ETH_ALEN); + hdr->duration_id = cpu_to_le16(sta->aid | BIT(15) | BIT(14)); + + PDEBUG(DEBUG_PS2, + "%s: Scheduling buffered packet delivery for STA %pM\n", + local->dev->name, sta->addr); + + skb->dev = local->dev; + + memset(&rx_stats, 0, sizeof(rx_stats)); + hostap_rx(local->dev, skb, &rx_stats); +} + + +int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], + struct iw_quality qual[], int buf_size, + int aplist) +{ + struct ap_data *ap = local->ap; + struct list_head *ptr; + int count = 0; + + spin_lock_bh(&ap->sta_table_lock); + + for (ptr = ap->sta_list.next; ptr != NULL && ptr != &ap->sta_list; + ptr = ptr->next) { + struct sta_info *sta = (struct sta_info *) ptr; + + if (aplist && !sta->ap) + continue; + addr[count].sa_family = ARPHRD_ETHER; + memcpy(addr[count].sa_data, sta->addr, ETH_ALEN); + if (sta->last_rx_silence == 0) + qual[count].qual = sta->last_rx_signal < 27 ? + 0 : (sta->last_rx_signal - 27) * 92 / 127; + else + qual[count].qual = sta->last_rx_signal - + sta->last_rx_silence - 35; + qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal); + qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); + qual[count].updated = sta->last_rx_updated; + + sta->last_rx_updated = IW_QUAL_DBM; + + count++; + if (count >= buf_size) + break; + } + spin_unlock_bh(&ap->sta_table_lock); + + return count; +} + + +/* Translate our list of Access Points & Stations to a card independent + * format that the Wireless Tools will understand - Jean II */ +int prism2_ap_translate_scan(struct net_device *dev, + struct iw_request_info *info, char *buffer) +{ + struct hostap_interface *iface; + local_info_t *local; + struct ap_data *ap; + struct list_head *ptr; + struct iw_event iwe; + char *current_ev = buffer; + char *end_buf = buffer + IW_SCAN_MAX_DATA; +#if !defined(PRISM2_NO_KERNEL_IEEE80211_MGMT) + char buf[64]; +#endif + + iface = netdev_priv(dev); + local = iface->local; + ap = local->ap; + + spin_lock_bh(&ap->sta_table_lock); + + for (ptr = ap->sta_list.next; ptr != NULL && ptr != &ap->sta_list; + ptr = ptr->next) { + struct sta_info *sta = (struct sta_info *) ptr; + + /* First entry *MUST* be the AP MAC address */ + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, sta->addr, ETH_ALEN); + iwe.len = IW_EV_ADDR_LEN; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); + + /* Use the mode to indicate if it's a station or + * an Access Point */ + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWMODE; + if (sta->ap) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_INFRA; + iwe.len = IW_EV_UINT_LEN; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); + + /* Some quality */ + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVQUAL; + if (sta->last_rx_silence == 0) + iwe.u.qual.qual = sta->last_rx_signal < 27 ? + 0 : (sta->last_rx_signal - 27) * 92 / 127; + else + iwe.u.qual.qual = sta->last_rx_signal - + sta->last_rx_silence - 35; + iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal); + iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); + iwe.u.qual.updated = sta->last_rx_updated; + iwe.len = IW_EV_QUAL_LEN; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (sta->ap) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWESSID; + iwe.u.data.length = sta->u.ap.ssid_len; + iwe.u.data.flags = 1; + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, + sta->u.ap.ssid); + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWENCODE; + if (sta->capability & WLAN_CAPABILITY_PRIVACY) + iwe.u.data.flags = + IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, + sta->u.ap.ssid); + + if (sta->u.ap.channel > 0 && + sta->u.ap.channel <= FREQ_COUNT) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = freq_list[sta->u.ap.channel - 1] + * 100000; + iwe.u.freq.e = 1; + current_ev = iwe_stream_add_event( + info, current_ev, end_buf, &iwe, + IW_EV_FREQ_LEN); + } + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + sprintf(buf, "beacon_interval=%d", + sta->listen_interval); + iwe.u.data.length = strlen(buf); + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); + } +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + sta->last_rx_updated = IW_QUAL_DBM; + + /* To be continued, we should make good use of IWEVCUSTOM */ + } + + spin_unlock_bh(&ap->sta_table_lock); + + return current_ev - buffer; +} + + +static int prism2_hostapd_add_sta(struct ap_data *ap, + struct prism2_hostapd_param *param) +{ + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, param->sta_addr); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&ap->sta_table_lock); + + if (sta == NULL) { + sta = ap_add_sta(ap, param->sta_addr); + if (sta == NULL) + return -1; + } + + if (!(sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) + hostap_event_new_sta(sta->local->dev, sta); + + sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC; + sta->last_rx = jiffies; + sta->aid = param->u.add_sta.aid; + sta->capability = param->u.add_sta.capability; + sta->tx_supp_rates = param->u.add_sta.tx_supp_rates; + if (sta->tx_supp_rates & WLAN_RATE_1M) + sta->supported_rates[0] = 2; + if (sta->tx_supp_rates & WLAN_RATE_2M) + sta->supported_rates[1] = 4; + if (sta->tx_supp_rates & WLAN_RATE_5M5) + sta->supported_rates[2] = 11; + if (sta->tx_supp_rates & WLAN_RATE_11M) + sta->supported_rates[3] = 22; + prism2_check_tx_rates(sta); + atomic_dec(&sta->users); + return 0; +} + + +static int prism2_hostapd_remove_sta(struct ap_data *ap, + struct prism2_hostapd_param *param) +{ + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, param->sta_addr); + if (sta) { + ap_sta_hash_del(ap, sta); + list_del(&sta->list); + } + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta) + return -ENOENT; + + if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local) + hostap_event_expired_sta(sta->local->dev, sta); + ap_free_sta(ap, sta); + + return 0; +} + + +static int prism2_hostapd_get_info_sta(struct ap_data *ap, + struct prism2_hostapd_param *param) +{ + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, param->sta_addr); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta) + return -ENOENT; + + param->u.get_info_sta.inactive_sec = (jiffies - sta->last_rx) / HZ; + + atomic_dec(&sta->users); + + return 1; +} + + +static int prism2_hostapd_set_flags_sta(struct ap_data *ap, + struct prism2_hostapd_param *param) +{ + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, param->sta_addr); + if (sta) { + sta->flags |= param->u.set_flags_sta.flags_or; + sta->flags &= param->u.set_flags_sta.flags_and; + } + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta) + return -ENOENT; + + return 0; +} + + +static int prism2_hostapd_sta_clear_stats(struct ap_data *ap, + struct prism2_hostapd_param *param) +{ + struct sta_info *sta; + int rate; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, param->sta_addr); + if (sta) { + sta->rx_packets = sta->tx_packets = 0; + sta->rx_bytes = sta->tx_bytes = 0; + for (rate = 0; rate < WLAN_RATE_COUNT; rate++) { + sta->tx_count[rate] = 0; + sta->rx_count[rate] = 0; + } + } + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta) + return -ENOENT; + + return 0; +} + + +int prism2_hostapd(struct ap_data *ap, struct prism2_hostapd_param *param) +{ + switch (param->cmd) { + case PRISM2_HOSTAPD_FLUSH: + ap_control_kickall(ap); + return 0; + case PRISM2_HOSTAPD_ADD_STA: + return prism2_hostapd_add_sta(ap, param); + case PRISM2_HOSTAPD_REMOVE_STA: + return prism2_hostapd_remove_sta(ap, param); + case PRISM2_HOSTAPD_GET_INFO_STA: + return prism2_hostapd_get_info_sta(ap, param); + case PRISM2_HOSTAPD_SET_FLAGS_STA: + return prism2_hostapd_set_flags_sta(ap, param); + case PRISM2_HOSTAPD_STA_CLEAR_STATS: + return prism2_hostapd_sta_clear_stats(ap, param); + default: + printk(KERN_WARNING "prism2_hostapd: unknown cmd=%d\n", + param->cmd); + return -EOPNOTSUPP; + } +} + + +/* Update station info for host-based TX rate control and return current + * TX rate */ +static int ap_update_sta_tx_rate(struct sta_info *sta, struct net_device *dev) +{ + int ret = sta->tx_rate; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + sta->tx_count[sta->tx_rate_idx]++; + sta->tx_since_last_failure++; + sta->tx_consecutive_exc = 0; + if (sta->tx_since_last_failure >= WLAN_RATE_UPDATE_COUNT && + sta->tx_rate_idx < sta->tx_max_rate) { + /* use next higher rate */ + int old_rate, new_rate; + old_rate = new_rate = sta->tx_rate_idx; + while (new_rate < sta->tx_max_rate) { + new_rate++; + if (ap_tx_rate_ok(new_rate, sta, local)) { + sta->tx_rate_idx = new_rate; + break; + } + } + if (old_rate != sta->tx_rate_idx) { + switch (sta->tx_rate_idx) { + case 0: sta->tx_rate = 10; break; + case 1: sta->tx_rate = 20; break; + case 2: sta->tx_rate = 55; break; + case 3: sta->tx_rate = 110; break; + default: sta->tx_rate = 0; break; + } + PDEBUG(DEBUG_AP, "%s: STA %pM TX rate raised to %d\n", + dev->name, sta->addr, sta->tx_rate); + } + sta->tx_since_last_failure = 0; + } + + return ret; +} + + +/* Called only from software IRQ. Called for each TX frame prior possible + * encryption and transmit. */ +ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx) +{ + struct sta_info *sta = NULL; + struct sk_buff *skb = tx->skb; + int set_tim, ret; + struct ieee80211_hdr *hdr; + struct hostap_skb_tx_data *meta; + + meta = (struct hostap_skb_tx_data *) skb->cb; + ret = AP_TX_CONTINUE; + if (local->ap == NULL || skb->len < 10 || + meta->iface->type == HOSTAP_INTERFACE_STA) + goto out; + + hdr = (struct ieee80211_hdr *) skb->data; + + if (hdr->addr1[0] & 0x01) { + /* broadcast/multicast frame - no AP related processing */ + if (local->ap->num_sta <= 0) + ret = AP_TX_DROP; + goto out; + } + + /* unicast packet - check whether destination STA is associated */ + spin_lock(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr1); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&local->ap->sta_table_lock); + + if (local->iw_mode == IW_MODE_MASTER && sta == NULL && + !(meta->flags & HOSTAP_TX_FLAGS_WDS) && + meta->iface->type != HOSTAP_INTERFACE_MASTER && + meta->iface->type != HOSTAP_INTERFACE_AP) { +#if 0 + /* This can happen, e.g., when wlan0 is added to a bridge and + * bridging code does not know which port is the correct target + * for a unicast frame. In this case, the packet is send to all + * ports of the bridge. Since this is a valid scenario, do not + * print out any errors here. */ + if (net_ratelimit()) { + printk(KERN_DEBUG "AP: drop packet to non-associated " + "STA %pM\n", hdr->addr1); + } +#endif + local->ap->tx_drop_nonassoc++; + ret = AP_TX_DROP; + goto out; + } + + if (sta == NULL) + goto out; + + if (!(sta->flags & WLAN_STA_AUTHORIZED)) + ret = AP_TX_CONTINUE_NOT_AUTHORIZED; + + /* Set tx_rate if using host-based TX rate control */ + if (!local->fw_tx_rate_control) + local->ap->last_tx_rate = meta->rate = + ap_update_sta_tx_rate(sta, local->dev); + + if (local->iw_mode != IW_MODE_MASTER) + goto out; + + if (!(sta->flags & WLAN_STA_PS)) + goto out; + + if (meta->flags & HOSTAP_TX_FLAGS_ADD_MOREDATA) { + /* indicate to STA that more frames follow */ + hdr->frame_control |= + cpu_to_le16(IEEE80211_FCTL_MOREDATA); + } + + if (meta->flags & HOSTAP_TX_FLAGS_BUFFERED_FRAME) { + /* packet was already buffered and now send due to + * PS poll, so do not rebuffer it */ + goto out; + } + + if (skb_queue_len(&sta->tx_buf) >= STA_MAX_TX_BUFFER) { + PDEBUG(DEBUG_PS, "%s: No more space in STA (%pM)'s" + "PS mode buffer\n", + local->dev->name, sta->addr); + /* Make sure that TIM is set for the station (it might not be + * after AP wlan hw reset). */ + /* FIX: should fix hw reset to restore bits based on STA + * buffer state.. */ + hostap_set_tim(local, sta->aid, 1); + sta->flags |= WLAN_STA_TIM; + ret = AP_TX_DROP; + goto out; + } + + /* STA in PS mode, buffer frame for later delivery */ + set_tim = skb_queue_empty(&sta->tx_buf); + skb_queue_tail(&sta->tx_buf, skb); + /* FIX: could save RX time to skb and expire buffered frames after + * some time if STA does not poll for them */ + + if (set_tim) { + if (sta->flags & WLAN_STA_TIM) + PDEBUG(DEBUG_PS2, "Re-setting TIM for aid %d\n", + sta->aid); + hostap_set_tim(local, sta->aid, 1); + sta->flags |= WLAN_STA_TIM; + } + + ret = AP_TX_BUFFERED; + + out: + if (sta != NULL) { + if (ret == AP_TX_CONTINUE || + ret == AP_TX_CONTINUE_NOT_AUTHORIZED) { + sta->tx_packets++; + sta->tx_bytes += skb->len; + sta->last_tx = jiffies; + } + + if ((ret == AP_TX_CONTINUE || + ret == AP_TX_CONTINUE_NOT_AUTHORIZED) && + sta->crypt && tx->host_encrypt) { + tx->crypt = sta->crypt; + tx->sta_ptr = sta; /* hostap_handle_sta_release() will + * be called to release sta info + * later */ + } else + atomic_dec(&sta->users); + } + + return ret; +} + + +void hostap_handle_sta_release(void *ptr) +{ + struct sta_info *sta = ptr; + atomic_dec(&sta->users); +} + + +/* Called only as a tasklet (software IRQ) */ +void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb) +{ + struct sta_info *sta; + struct ieee80211_hdr *hdr; + struct hostap_skb_tx_data *meta; + + hdr = (struct ieee80211_hdr *) skb->data; + meta = (struct hostap_skb_tx_data *) skb->cb; + + spin_lock(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr1); + if (!sta) { + spin_unlock(&local->ap->sta_table_lock); + PDEBUG(DEBUG_AP, "%s: Could not find STA %pM" + " for this TX error (@%lu)\n", + local->dev->name, hdr->addr1, jiffies); + return; + } + + sta->tx_since_last_failure = 0; + sta->tx_consecutive_exc++; + + if (sta->tx_consecutive_exc >= WLAN_RATE_DECREASE_THRESHOLD && + sta->tx_rate_idx > 0 && meta->rate <= sta->tx_rate) { + /* use next lower rate */ + int old, rate; + old = rate = sta->tx_rate_idx; + while (rate > 0) { + rate--; + if (ap_tx_rate_ok(rate, sta, local)) { + sta->tx_rate_idx = rate; + break; + } + } + if (old != sta->tx_rate_idx) { + switch (sta->tx_rate_idx) { + case 0: sta->tx_rate = 10; break; + case 1: sta->tx_rate = 20; break; + case 2: sta->tx_rate = 55; break; + case 3: sta->tx_rate = 110; break; + default: sta->tx_rate = 0; break; + } + PDEBUG(DEBUG_AP, + "%s: STA %pM TX rate lowered to %d\n", + local->dev->name, sta->addr, sta->tx_rate); + } + sta->tx_consecutive_exc = 0; + } + spin_unlock(&local->ap->sta_table_lock); +} + + +static void hostap_update_sta_ps2(local_info_t *local, struct sta_info *sta, + int pwrmgt, int type, int stype) +{ + if (pwrmgt && !(sta->flags & WLAN_STA_PS)) { + sta->flags |= WLAN_STA_PS; + PDEBUG(DEBUG_PS2, "STA %pM changed to use PS " + "mode (type=0x%02X, stype=0x%02X)\n", + sta->addr, type >> 2, stype >> 4); + } else if (!pwrmgt && (sta->flags & WLAN_STA_PS)) { + sta->flags &= ~WLAN_STA_PS; + PDEBUG(DEBUG_PS2, "STA %pM changed to not use " + "PS mode (type=0x%02X, stype=0x%02X)\n", + sta->addr, type >> 2, stype >> 4); + if (type != IEEE80211_FTYPE_CTL || + stype != IEEE80211_STYPE_PSPOLL) + schedule_packet_send(local, sta); + } +} + + +/* Called only as a tasklet (software IRQ). Called for each RX frame to update + * STA power saving state. pwrmgt is a flag from 802.11 frame_control field. */ +int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr) +{ + struct sta_info *sta; + u16 fc; + + spin_lock(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&local->ap->sta_table_lock); + + if (!sta) + return -1; + + fc = le16_to_cpu(hdr->frame_control); + hostap_update_sta_ps2(local, sta, fc & IEEE80211_FCTL_PM, + fc & IEEE80211_FCTL_FTYPE, + fc & IEEE80211_FCTL_STYPE); + + atomic_dec(&sta->users); + return 0; +} + + +/* Called only as a tasklet (software IRQ). Called for each RX frame after + * getting RX header and payload from hardware. */ +ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, + struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, + int wds) +{ + int ret; + struct sta_info *sta; + u16 fc, type, stype; + struct ieee80211_hdr *hdr; + + if (local->ap == NULL) + return AP_RX_CONTINUE; + + hdr = (struct ieee80211_hdr *) skb->data; + + fc = le16_to_cpu(hdr->frame_control); + type = fc & IEEE80211_FCTL_FTYPE; + stype = fc & IEEE80211_FCTL_STYPE; + + spin_lock(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&local->ap->sta_table_lock); + + if (sta && !(sta->flags & WLAN_STA_AUTHORIZED)) + ret = AP_RX_CONTINUE_NOT_AUTHORIZED; + else + ret = AP_RX_CONTINUE; + + + if (fc & IEEE80211_FCTL_TODS) { + if (!wds && (sta == NULL || !(sta->flags & WLAN_STA_ASSOC))) { + if (local->hostapd) { + prism2_rx_80211(local->apdev, skb, rx_stats, + PRISM2_RX_NON_ASSOC); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + } else { + printk(KERN_DEBUG "%s: dropped received packet" + " from non-associated STA %pM" + " (type=0x%02x, subtype=0x%02x)\n", + dev->name, hdr->addr2, + type >> 2, stype >> 4); + hostap_rx(dev, skb, rx_stats); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + } + ret = AP_RX_EXIT; + goto out; + } + } else if (fc & IEEE80211_FCTL_FROMDS) { + if (!wds) { + /* FromDS frame - not for us; probably + * broadcast/multicast in another BSS - drop */ + if (ether_addr_equal(hdr->addr1, dev->dev_addr)) { + printk(KERN_DEBUG "Odd.. FromDS packet " + "received with own BSSID\n"); + hostap_dump_rx_80211(dev->name, skb, rx_stats); + } + ret = AP_RX_DROP; + goto out; + } + } else if (stype == IEEE80211_STYPE_NULLFUNC && sta == NULL && + ether_addr_equal(hdr->addr1, dev->dev_addr)) { + + if (local->hostapd) { + prism2_rx_80211(local->apdev, skb, rx_stats, + PRISM2_RX_NON_ASSOC); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + } else { + /* At least Lucent f/w seems to send data::nullfunc + * frames with no ToDS flag when the current AP returns + * after being unavailable for some time. Speed up + * re-association by informing the station about it not + * being associated. */ + printk(KERN_DEBUG "%s: rejected received nullfunc frame" + " without ToDS from not associated STA %pM\n", + dev->name, hdr->addr2); + hostap_rx(dev, skb, rx_stats); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + } + ret = AP_RX_EXIT; + goto out; + } else if (stype == IEEE80211_STYPE_NULLFUNC) { + /* At least Lucent cards seem to send periodic nullfunc + * frames with ToDS. Let these through to update SQ + * stats and PS state. Nullfunc frames do not contain + * any data and they will be dropped below. */ + } else { + /* If BSSID (Addr3) is foreign, this frame is a normal + * broadcast frame from an IBSS network. Drop it silently. + * If BSSID is own, report the dropping of this frame. */ + if (ether_addr_equal(hdr->addr3, dev->dev_addr)) { + printk(KERN_DEBUG "%s: dropped received packet from %pM" + " with no ToDS flag " + "(type=0x%02x, subtype=0x%02x)\n", dev->name, + hdr->addr2, type >> 2, stype >> 4); + hostap_dump_rx_80211(dev->name, skb, rx_stats); + } + ret = AP_RX_DROP; + goto out; + } + + if (sta) { + hostap_update_sta_ps2(local, sta, fc & IEEE80211_FCTL_PM, + type, stype); + + sta->rx_packets++; + sta->rx_bytes += skb->len; + sta->last_rx = jiffies; + } + + if (local->ap->nullfunc_ack && stype == IEEE80211_STYPE_NULLFUNC && + fc & IEEE80211_FCTL_TODS) { + if (local->hostapd) { + prism2_rx_80211(local->apdev, skb, rx_stats, + PRISM2_RX_NULLFUNC_ACK); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + } else { + /* some STA f/w's seem to require control::ACK frame + * for data::nullfunc, but Prism2 f/w 0.8.0 (at least + * from Compaq) does not send this.. Try to generate + * ACK for these frames from the host driver to make + * power saving work with, e.g., Lucent WaveLAN f/w */ + hostap_rx(dev, skb, rx_stats); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + } + ret = AP_RX_EXIT; + goto out; + } + + out: + if (sta) + atomic_dec(&sta->users); + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +int hostap_handle_sta_crypto(local_info_t *local, + struct ieee80211_hdr *hdr, + struct lib80211_crypt_data **crypt, + void **sta_ptr) +{ + struct sta_info *sta; + + spin_lock(&local->ap->sta_table_lock); + sta = ap_get_sta(local->ap, hdr->addr2); + if (sta) + atomic_inc(&sta->users); + spin_unlock(&local->ap->sta_table_lock); + + if (!sta) + return -1; + + if (sta->crypt) { + *crypt = sta->crypt; + *sta_ptr = sta; + /* hostap_handle_sta_release() will be called to release STA + * info */ + } else + atomic_dec(&sta->users); + + return 0; +} + + +/* Called only as a tasklet (software IRQ) */ +int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr) +{ + struct sta_info *sta; + int ret = 0; + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, sta_addr); + if (sta != NULL && (sta->flags & WLAN_STA_ASSOC) && !sta->ap) + ret = 1; + spin_unlock(&ap->sta_table_lock); + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr) +{ + struct sta_info *sta; + int ret = 0; + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, sta_addr); + if (sta != NULL && (sta->flags & WLAN_STA_ASSOC) && !sta->ap && + ((sta->flags & WLAN_STA_AUTHORIZED) || + ap->local->ieee_802_1x == 0)) + ret = 1; + spin_unlock(&ap->sta_table_lock); + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +int hostap_add_sta(struct ap_data *ap, u8 *sta_addr) +{ + struct sta_info *sta; + int ret = 1; + + if (!ap) + return -1; + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, sta_addr); + if (sta) + ret = 0; + spin_unlock(&ap->sta_table_lock); + + if (ret == 1) { + sta = ap_add_sta(ap, sta_addr); + if (!sta) + return -1; + sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC; + sta->ap = 1; + memset(sta->supported_rates, 0, sizeof(sta->supported_rates)); + /* No way of knowing which rates are supported since we did not + * get supported rates element from beacon/assoc req. Assume + * that remote end supports all 802.11b rates. */ + sta->supported_rates[0] = 0x82; + sta->supported_rates[1] = 0x84; + sta->supported_rates[2] = 0x0b; + sta->supported_rates[3] = 0x16; + sta->tx_supp_rates = WLAN_RATE_1M | WLAN_RATE_2M | + WLAN_RATE_5M5 | WLAN_RATE_11M; + sta->tx_rate = 110; + sta->tx_max_rate = sta->tx_rate_idx = 3; + } + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +int hostap_update_rx_stats(struct ap_data *ap, + struct ieee80211_hdr *hdr, + struct hostap_80211_rx_status *rx_stats) +{ + struct sta_info *sta; + + if (!ap) + return -1; + + spin_lock(&ap->sta_table_lock); + sta = ap_get_sta(ap, hdr->addr2); + if (sta) { + sta->last_rx_silence = rx_stats->noise; + sta->last_rx_signal = rx_stats->signal; + sta->last_rx_rate = rx_stats->rate; + sta->last_rx_updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; + if (rx_stats->rate == 10) + sta->rx_count[0]++; + else if (rx_stats->rate == 20) + sta->rx_count[1]++; + else if (rx_stats->rate == 55) + sta->rx_count[2]++; + else if (rx_stats->rate == 110) + sta->rx_count[3]++; + } + spin_unlock(&ap->sta_table_lock); + + return sta ? 0 : -1; +} + + +void hostap_update_rates(local_info_t *local) +{ + struct sta_info *sta; + struct ap_data *ap = local->ap; + + if (!ap) + return; + + spin_lock_bh(&ap->sta_table_lock); + list_for_each_entry(sta, &ap->sta_list, list) { + prism2_check_tx_rates(sta); + } + spin_unlock_bh(&ap->sta_table_lock); +} + + +void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent, + struct lib80211_crypt_data ***crypt) +{ + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + sta = ap_get_sta(ap, addr); + if (sta) + atomic_inc(&sta->users); + spin_unlock_bh(&ap->sta_table_lock); + + if (!sta && permanent) + sta = ap_add_sta(ap, addr); + + if (!sta) + return NULL; + + if (permanent) + sta->flags |= WLAN_STA_PERM; + + *crypt = &sta->crypt; + + return sta; +} + + +void hostap_add_wds_links(local_info_t *local) +{ + struct ap_data *ap = local->ap; + struct sta_info *sta; + + spin_lock_bh(&ap->sta_table_lock); + list_for_each_entry(sta, &ap->sta_list, list) { + if (sta->ap) + hostap_wds_link_oper(local, sta->addr, WDS_ADD); + } + spin_unlock_bh(&ap->sta_table_lock); + + schedule_work(&local->ap->wds_oper_queue); +} + + +void hostap_wds_link_oper(local_info_t *local, u8 *addr, wds_oper_type type) +{ + struct wds_oper_data *entry; + + entry = kmalloc(sizeof(*entry), GFP_ATOMIC); + if (!entry) + return; + memcpy(entry->addr, addr, ETH_ALEN); + entry->type = type; + spin_lock_bh(&local->lock); + entry->next = local->ap->wds_oper_entries; + local->ap->wds_oper_entries = entry; + spin_unlock_bh(&local->lock); + + schedule_work(&local->ap->wds_oper_queue); +} + + +EXPORT_SYMBOL(hostap_init_data); +EXPORT_SYMBOL(hostap_init_ap_proc); +EXPORT_SYMBOL(hostap_free_data); +EXPORT_SYMBOL(hostap_check_sta_fw_version); +EXPORT_SYMBOL(hostap_handle_sta_tx_exc); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_ap.h b/drivers/net/wireless/intersil/hostap/hostap_ap.h new file mode 100644 index 000000000..334e2d0b8 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_ap.h @@ -0,0 +1,263 @@ +#ifndef HOSTAP_AP_H +#define HOSTAP_AP_H + +#include "hostap_80211.h" + +/* AP data structures for STAs */ + +/* maximum number of frames to buffer per STA */ +#define STA_MAX_TX_BUFFER 32 + +/* STA flags */ +#define WLAN_STA_AUTH BIT(0) +#define WLAN_STA_ASSOC BIT(1) +#define WLAN_STA_PS BIT(2) +#define WLAN_STA_TIM BIT(3) /* TIM bit is on for PS stations */ +#define WLAN_STA_PERM BIT(4) /* permanent; do not remove entry on expiration */ +#define WLAN_STA_AUTHORIZED BIT(5) /* If 802.1X is used, this flag is + * controlling whether STA is authorized to + * send and receive non-IEEE 802.1X frames + */ +#define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */ + +#define WLAN_RATE_1M BIT(0) +#define WLAN_RATE_2M BIT(1) +#define WLAN_RATE_5M5 BIT(2) +#define WLAN_RATE_11M BIT(3) +#define WLAN_RATE_COUNT 4 + +/* Maximum size of Supported Rates info element. IEEE 802.11 has a limit of 8, + * but some pre-standard IEEE 802.11g products use longer elements. */ +#define WLAN_SUPP_RATES_MAX 32 + +/* Try to increase TX rate after # successfully sent consecutive packets */ +#define WLAN_RATE_UPDATE_COUNT 50 + +/* Decrease TX rate after # consecutive dropped packets */ +#define WLAN_RATE_DECREASE_THRESHOLD 2 + +struct sta_info { + struct list_head list; + struct sta_info *hnext; /* next entry in hash table list */ + atomic_t users; /* number of users (do not remove if > 0) */ + struct proc_dir_entry *proc; + + u8 addr[6]; + u16 aid; /* STA's unique AID (1 .. 2007) or 0 if not yet assigned */ + u32 flags; + u16 capability; + u16 listen_interval; /* or beacon_int for APs */ + u8 supported_rates[WLAN_SUPP_RATES_MAX]; + + unsigned long last_auth; + unsigned long last_assoc; + unsigned long last_rx; + unsigned long last_tx; + unsigned long rx_packets, tx_packets; + unsigned long rx_bytes, tx_bytes; + struct sk_buff_head tx_buf; + /* FIX: timeout buffers with an expiry time somehow derived from + * listen_interval */ + + s8 last_rx_silence; /* Noise in dBm */ + s8 last_rx_signal; /* Signal strength in dBm */ + u8 last_rx_rate; /* TX rate in 0.1 Mbps */ + u8 last_rx_updated; /* IWSPY's struct iw_quality::updated */ + + u8 tx_supp_rates; /* bit field of supported TX rates */ + u8 tx_rate; /* current TX rate (in 0.1 Mbps) */ + u8 tx_rate_idx; /* current TX rate (WLAN_RATE_*) */ + u8 tx_max_rate; /* max TX rate (WLAN_RATE_*) */ + u32 tx_count[WLAN_RATE_COUNT]; /* number of frames sent (per rate) */ + u32 rx_count[WLAN_RATE_COUNT]; /* number of frames received (per rate) + */ + u32 tx_since_last_failure; + u32 tx_consecutive_exc; + + struct lib80211_crypt_data *crypt; + + int ap; /* whether this station is an AP */ + + local_info_t *local; + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + union { + struct { + char *challenge; /* shared key authentication + * challenge */ + } sta; + struct { + int ssid_len; + unsigned char ssid[MAX_SSID_LEN + 1]; /* AP's ssid */ + int channel; + unsigned long last_beacon; /* last RX beacon time */ + } ap; + } u; + + struct timer_list timer; + enum { STA_NULLFUNC = 0, STA_DISASSOC, STA_DEAUTH } timeout_next; +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ +}; + + +#define MAX_STA_COUNT 1024 + +/* Maximum number of AIDs to use for STAs; must be 2007 or lower + * (8802.11 limitation) */ +#define MAX_AID_TABLE_SIZE 128 + +#define STA_HASH_SIZE 256 +#define STA_HASH(sta) (sta[5]) + + +/* Default value for maximum station inactivity. After AP_MAX_INACTIVITY_SEC + * has passed since last received frame from the station, a nullfunc data + * frame is sent to the station. If this frame is not acknowledged and no other + * frames have been received, the station will be disassociated after + * AP_DISASSOC_DELAY. Similarly, a the station will be deauthenticated after + * AP_DEAUTH_DELAY. AP_TIMEOUT_RESOLUTION is the resolution that is used with + * max inactivity timer. */ +#define AP_MAX_INACTIVITY_SEC (5 * 60) +#define AP_DISASSOC_DELAY (HZ) +#define AP_DEAUTH_DELAY (HZ) + +/* ap_policy: whether to accept frames to/from other APs/IBSS */ +typedef enum { + AP_OTHER_AP_SKIP_ALL = 0, + AP_OTHER_AP_SAME_SSID = 1, + AP_OTHER_AP_ALL = 2, + AP_OTHER_AP_EVEN_IBSS = 3 +} ap_policy_enum; + +#define PRISM2_AUTH_OPEN BIT(0) +#define PRISM2_AUTH_SHARED_KEY BIT(1) + + +/* MAC address-based restrictions */ +struct mac_entry { + struct list_head list; + u8 addr[6]; +}; + +struct mac_restrictions { + enum { MAC_POLICY_OPEN = 0, MAC_POLICY_ALLOW, MAC_POLICY_DENY } policy; + unsigned int entries; + struct list_head mac_list; + spinlock_t lock; +}; + + +struct add_sta_proc_data { + u8 addr[ETH_ALEN]; + struct add_sta_proc_data *next; +}; + + +typedef enum { WDS_ADD, WDS_DEL } wds_oper_type; +struct wds_oper_data { + wds_oper_type type; + u8 addr[ETH_ALEN]; + struct wds_oper_data *next; +}; + + +struct ap_data { + int initialized; /* whether ap_data has been initialized */ + local_info_t *local; + int bridge_packets; /* send packet to associated STAs directly to the + * wireless media instead of higher layers in the + * kernel */ + unsigned int bridged_unicast; /* number of unicast frames bridged on + * wireless media */ + unsigned int bridged_multicast; /* number of non-unicast frames + * bridged on wireless media */ + unsigned int tx_drop_nonassoc; /* number of unicast TX packets dropped + * because they were to an address that + * was not associated */ + int nullfunc_ack; /* use workaround for nullfunc frame ACKs */ + + spinlock_t sta_table_lock; + int num_sta; /* number of entries in sta_list */ + struct list_head sta_list; /* STA info list head */ + struct sta_info *sta_hash[STA_HASH_SIZE]; + + struct proc_dir_entry *proc; + + ap_policy_enum ap_policy; + unsigned int max_inactivity; + int autom_ap_wds; + + struct mac_restrictions mac_restrictions; /* MAC-based auth */ + int last_tx_rate; + + struct work_struct add_sta_proc_queue; + struct add_sta_proc_data *add_sta_proc_entries; + + struct work_struct wds_oper_queue; + struct wds_oper_data *wds_oper_entries; + + u16 tx_callback_idx; + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + /* pointers to STA info; based on allocated AID or NULL if AID free + * AID is in the range 1-2007, so sta_aid[0] corresponders to AID 1 + * and so on + */ + struct sta_info *sta_aid[MAX_AID_TABLE_SIZE]; + + u16 tx_callback_auth, tx_callback_assoc, tx_callback_poll; + + /* WEP operations for generating challenges to be used with shared key + * authentication */ + struct lib80211_crypto_ops *crypt; + void *crypt_priv; +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ +}; + + +void hostap_rx(struct net_device *dev, struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats); +void hostap_init_data(local_info_t *local); +void hostap_init_ap_proc(local_info_t *local); +void hostap_free_data(struct ap_data *ap); +void hostap_check_sta_fw_version(struct ap_data *ap, int sta_fw_ver); + +typedef enum { + AP_TX_CONTINUE, AP_TX_DROP, AP_TX_RETRY, AP_TX_BUFFERED, + AP_TX_CONTINUE_NOT_AUTHORIZED +} ap_tx_ret; +struct hostap_tx_data { + struct sk_buff *skb; + int host_encrypt; + struct lib80211_crypt_data *crypt; + void *sta_ptr; +}; +ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx); +void hostap_handle_sta_release(void *ptr); +void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb); +int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr); +typedef enum { + AP_RX_CONTINUE, AP_RX_DROP, AP_RX_EXIT, AP_RX_CONTINUE_NOT_AUTHORIZED +} ap_rx_ret; +ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, + struct sk_buff *skb, + struct hostap_80211_rx_status *rx_stats, + int wds); +int hostap_handle_sta_crypto(local_info_t *local, struct ieee80211_hdr *hdr, + struct lib80211_crypt_data **crypt, + void **sta_ptr); +int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr); +int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr); +int hostap_add_sta(struct ap_data *ap, u8 *sta_addr); +int hostap_update_rx_stats(struct ap_data *ap, struct ieee80211_hdr *hdr, + struct hostap_80211_rx_status *rx_stats); +void hostap_update_rates(local_info_t *local); +void hostap_add_wds_links(local_info_t *local); +void hostap_wds_link_oper(local_info_t *local, u8 *addr, wds_oper_type type); + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +void hostap_deauth_all_stas(struct net_device *dev, struct ap_data *ap, + int resend); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + +#endif /* HOSTAP_AP_H */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_common.h b/drivers/net/wireless/intersil/hostap/hostap_common.h new file mode 100644 index 000000000..4230102ac --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_common.h @@ -0,0 +1,419 @@ +#ifndef HOSTAP_COMMON_H +#define HOSTAP_COMMON_H + +#include <linux/types.h> +#include <linux/if_ether.h> + +/* IEEE 802.11 defines */ + +/* HFA384X Configuration RIDs */ +#define HFA384X_RID_CNFPORTTYPE 0xFC00 +#define HFA384X_RID_CNFOWNMACADDR 0xFC01 +#define HFA384X_RID_CNFDESIREDSSID 0xFC02 +#define HFA384X_RID_CNFOWNCHANNEL 0xFC03 +#define HFA384X_RID_CNFOWNSSID 0xFC04 +#define HFA384X_RID_CNFOWNATIMWINDOW 0xFC05 +#define HFA384X_RID_CNFSYSTEMSCALE 0xFC06 +#define HFA384X_RID_CNFMAXDATALEN 0xFC07 +#define HFA384X_RID_CNFWDSADDRESS 0xFC08 +#define HFA384X_RID_CNFPMENABLED 0xFC09 +#define HFA384X_RID_CNFPMEPS 0xFC0A +#define HFA384X_RID_CNFMULTICASTRECEIVE 0xFC0B +#define HFA384X_RID_CNFMAXSLEEPDURATION 0xFC0C +#define HFA384X_RID_CNFPMHOLDOVERDURATION 0xFC0D +#define HFA384X_RID_CNFOWNNAME 0xFC0E +#define HFA384X_RID_CNFOWNDTIMPERIOD 0xFC10 +#define HFA384X_RID_CNFWDSADDRESS1 0xFC11 /* AP f/w only */ +#define HFA384X_RID_CNFWDSADDRESS2 0xFC12 /* AP f/w only */ +#define HFA384X_RID_CNFWDSADDRESS3 0xFC13 /* AP f/w only */ +#define HFA384X_RID_CNFWDSADDRESS4 0xFC14 /* AP f/w only */ +#define HFA384X_RID_CNFWDSADDRESS5 0xFC15 /* AP f/w only */ +#define HFA384X_RID_CNFWDSADDRESS6 0xFC16 /* AP f/w only */ +#define HFA384X_RID_CNFMULTICASTPMBUFFERING 0xFC17 /* AP f/w only */ +#define HFA384X_RID_UNKNOWN1 0xFC20 +#define HFA384X_RID_UNKNOWN2 0xFC21 +#define HFA384X_RID_CNFWEPDEFAULTKEYID 0xFC23 +#define HFA384X_RID_CNFDEFAULTKEY0 0xFC24 +#define HFA384X_RID_CNFDEFAULTKEY1 0xFC25 +#define HFA384X_RID_CNFDEFAULTKEY2 0xFC26 +#define HFA384X_RID_CNFDEFAULTKEY3 0xFC27 +#define HFA384X_RID_CNFWEPFLAGS 0xFC28 +#define HFA384X_RID_CNFWEPKEYMAPPINGTABLE 0xFC29 +#define HFA384X_RID_CNFAUTHENTICATION 0xFC2A +#define HFA384X_RID_CNFMAXASSOCSTA 0xFC2B /* AP f/w only */ +#define HFA384X_RID_CNFTXCONTROL 0xFC2C +#define HFA384X_RID_CNFROAMINGMODE 0xFC2D +#define HFA384X_RID_CNFHOSTAUTHENTICATION 0xFC2E /* AP f/w only */ +#define HFA384X_RID_CNFRCVCRCERROR 0xFC30 +#define HFA384X_RID_CNFMMLIFE 0xFC31 +#define HFA384X_RID_CNFALTRETRYCOUNT 0xFC32 +#define HFA384X_RID_CNFBEACONINT 0xFC33 +#define HFA384X_RID_CNFAPPCFINFO 0xFC34 /* AP f/w only */ +#define HFA384X_RID_CNFSTAPCFINFO 0xFC35 +#define HFA384X_RID_CNFPRIORITYQUSAGE 0xFC37 +#define HFA384X_RID_CNFTIMCTRL 0xFC40 +#define HFA384X_RID_UNKNOWN3 0xFC41 /* added in STA f/w 0.7.x */ +#define HFA384X_RID_CNFTHIRTY2TALLY 0xFC42 /* added in STA f/w 0.8.0 */ +#define HFA384X_RID_CNFENHSECURITY 0xFC43 /* AP f/w or STA f/w >= 1.6.3 */ +#define HFA384X_RID_CNFDBMADJUST 0xFC46 /* added in STA f/w 1.3.1 */ +#define HFA384X_RID_GENERICELEMENT 0xFC48 /* added in STA f/w 1.7.0; + * write only */ +#define HFA384X_RID_PROPAGATIONDELAY 0xFC49 /* added in STA f/w 1.7.6 */ +#define HFA384X_RID_GROUPADDRESSES 0xFC80 +#define HFA384X_RID_CREATEIBSS 0xFC81 +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD 0xFC82 +#define HFA384X_RID_RTSTHRESHOLD 0xFC83 +#define HFA384X_RID_TXRATECONTROL 0xFC84 +#define HFA384X_RID_PROMISCUOUSMODE 0xFC85 +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD0 0xFC90 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD1 0xFC91 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD2 0xFC92 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD3 0xFC93 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD4 0xFC94 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD5 0xFC95 /* AP f/w only */ +#define HFA384X_RID_FRAGMENTATIONTHRESHOLD6 0xFC96 /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD0 0xFC97 /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD1 0xFC98 /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD2 0xFC99 /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD3 0xFC9A /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD4 0xFC9B /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD5 0xFC9C /* AP f/w only */ +#define HFA384X_RID_RTSTHRESHOLD6 0xFC9D /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL0 0xFC9E /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL1 0xFC9F /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL2 0xFCA0 /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL3 0xFCA1 /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL4 0xFCA2 /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL5 0xFCA3 /* AP f/w only */ +#define HFA384X_RID_TXRATECONTROL6 0xFCA4 /* AP f/w only */ +#define HFA384X_RID_CNFSHORTPREAMBLE 0xFCB0 +#define HFA384X_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1 +#define HFA384X_RID_CNFAUTHENTICATIONRSPTO 0xFCB2 +#define HFA384X_RID_CNFBASICRATES 0xFCB3 +#define HFA384X_RID_CNFSUPPORTEDRATES 0xFCB4 +#define HFA384X_RID_CNFFALLBACKCTRL 0xFCB5 /* added in STA f/w 1.3.1 */ +#define HFA384X_RID_WEPKEYDISABLE 0xFCB6 /* added in STA f/w 1.3.1 */ +#define HFA384X_RID_WEPKEYMAPINDEX 0xFCB7 /* ? */ +#define HFA384X_RID_BROADCASTKEYID 0xFCB8 /* ? */ +#define HFA384X_RID_ENTSECFLAGEYID 0xFCB9 /* ? */ +#define HFA384X_RID_CNFPASSIVESCANCTRL 0xFCBA /* added in STA f/w 1.5.0 */ +#define HFA384X_RID_SSNHANDLINGMODE 0xFCBB /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_MDCCONTROL 0xFCBC /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_MDCCOUNTRY 0xFCBD /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_TXPOWERMAX 0xFCBE /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_CNFLFOENABLED 0xFCBF /* added in STA f/w 1.6.3 */ +#define HFA384X_RID_CAPINFO 0xFCC0 /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_LISTENINTERVAL 0xFCC1 /* added in STA f/w 1.7.0 */ +#define HFA384X_RID_SW_ANT_DIV 0xFCC2 /* added in STA f/w 1.7.0; Prism3 */ +#define HFA384X_RID_LED_CTRL 0xFCC4 /* added in STA f/w 1.7.6 */ +#define HFA384X_RID_HFODELAY 0xFCC5 /* added in STA f/w 1.7.6 */ +#define HFA384X_RID_DISALLOWEDBSSID 0xFCC6 /* added in STA f/w 1.8.0 */ +#define HFA384X_RID_TICKTIME 0xFCE0 +#define HFA384X_RID_SCANREQUEST 0xFCE1 +#define HFA384X_RID_JOINREQUEST 0xFCE2 +#define HFA384X_RID_AUTHENTICATESTATION 0xFCE3 /* AP f/w only */ +#define HFA384X_RID_CHANNELINFOREQUEST 0xFCE4 /* AP f/w only */ +#define HFA384X_RID_HOSTSCAN 0xFCE5 /* added in STA f/w 1.3.1 */ + +/* HFA384X Information RIDs */ +#define HFA384X_RID_MAXLOADTIME 0xFD00 +#define HFA384X_RID_DOWNLOADBUFFER 0xFD01 +#define HFA384X_RID_PRIID 0xFD02 +#define HFA384X_RID_PRISUPRANGE 0xFD03 +#define HFA384X_RID_CFIACTRANGES 0xFD04 +#define HFA384X_RID_NICSERNUM 0xFD0A +#define HFA384X_RID_NICID 0xFD0B +#define HFA384X_RID_MFISUPRANGE 0xFD0C +#define HFA384X_RID_CFISUPRANGE 0xFD0D +#define HFA384X_RID_CHANNELLIST 0xFD10 +#define HFA384X_RID_REGULATORYDOMAINS 0xFD11 +#define HFA384X_RID_TEMPTYPE 0xFD12 +#define HFA384X_RID_CIS 0xFD13 +#define HFA384X_RID_STAID 0xFD20 +#define HFA384X_RID_STASUPRANGE 0xFD21 +#define HFA384X_RID_MFIACTRANGES 0xFD22 +#define HFA384X_RID_CFIACTRANGES2 0xFD23 +#define HFA384X_RID_PRODUCTNAME 0xFD24 /* added in STA f/w 1.3.1; + * only Prism2.5(?) */ +#define HFA384X_RID_PORTSTATUS 0xFD40 +#define HFA384X_RID_CURRENTSSID 0xFD41 +#define HFA384X_RID_CURRENTBSSID 0xFD42 +#define HFA384X_RID_COMMSQUALITY 0xFD43 +#define HFA384X_RID_CURRENTTXRATE 0xFD44 +#define HFA384X_RID_CURRENTBEACONINTERVAL 0xFD45 +#define HFA384X_RID_CURRENTSCALETHRESHOLDS 0xFD46 +#define HFA384X_RID_PROTOCOLRSPTIME 0xFD47 +#define HFA384X_RID_SHORTRETRYLIMIT 0xFD48 +#define HFA384X_RID_LONGRETRYLIMIT 0xFD49 +#define HFA384X_RID_MAXTRANSMITLIFETIME 0xFD4A +#define HFA384X_RID_MAXRECEIVELIFETIME 0xFD4B +#define HFA384X_RID_CFPOLLABLE 0xFD4C +#define HFA384X_RID_AUTHENTICATIONALGORITHMS 0xFD4D +#define HFA384X_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F +#define HFA384X_RID_DBMCOMMSQUALITY 0xFD51 /* added in STA f/w 1.3.1 */ +#define HFA384X_RID_CURRENTTXRATE1 0xFD80 /* AP f/w only */ +#define HFA384X_RID_CURRENTTXRATE2 0xFD81 /* AP f/w only */ +#define HFA384X_RID_CURRENTTXRATE3 0xFD82 /* AP f/w only */ +#define HFA384X_RID_CURRENTTXRATE4 0xFD83 /* AP f/w only */ +#define HFA384X_RID_CURRENTTXRATE5 0xFD84 /* AP f/w only */ +#define HFA384X_RID_CURRENTTXRATE6 0xFD85 /* AP f/w only */ +#define HFA384X_RID_OWNMACADDR 0xFD86 /* AP f/w only */ +#define HFA384X_RID_SCANRESULTSTABLE 0xFD88 /* added in STA f/w 0.8.3 */ +#define HFA384X_RID_HOSTSCANRESULTS 0xFD89 /* added in STA f/w 1.3.1 */ +#define HFA384X_RID_AUTHENTICATIONUSED 0xFD8A /* added in STA f/w 1.3.4 */ +#define HFA384X_RID_CNFFAASWITCHCTRL 0xFD8B /* added in STA f/w 1.6.3 */ +#define HFA384X_RID_ASSOCIATIONFAILURE 0xFD8D /* added in STA f/w 1.8.0 */ +#define HFA384X_RID_PHYTYPE 0xFDC0 +#define HFA384X_RID_CURRENTCHANNEL 0xFDC1 +#define HFA384X_RID_CURRENTPOWERSTATE 0xFDC2 +#define HFA384X_RID_CCAMODE 0xFDC3 +#define HFA384X_RID_SUPPORTEDDATARATES 0xFDC6 +#define HFA384X_RID_LFO_VOLT_REG_TEST_RES 0xFDC7 /* added in STA f/w 1.7.1 */ +#define HFA384X_RID_BUILDSEQ 0xFFFE +#define HFA384X_RID_FWID 0xFFFF + + +struct hfa384x_comp_ident +{ + __le16 id; + __le16 variant; + __le16 major; + __le16 minor; +} __packed; + +#define HFA384X_COMP_ID_PRI 0x15 +#define HFA384X_COMP_ID_STA 0x1f +#define HFA384X_COMP_ID_FW_AP 0x14b + +struct hfa384x_sup_range +{ + __le16 role; + __le16 id; + __le16 variant; + __le16 bottom; + __le16 top; +} __packed; + + +struct hfa384x_build_id +{ + __le16 pri_seq; + __le16 sec_seq; +} __packed; + +/* FD01 - Download Buffer */ +struct hfa384x_rid_download_buffer +{ + __le16 page; + __le16 offset; + __le16 length; +} __packed; + +/* BSS connection quality (RID FD43 range, RID FD51 dBm-normalized) */ +struct hfa384x_comms_quality { + __le16 comm_qual; /* 0 .. 92 */ + __le16 signal_level; /* 27 .. 154 */ + __le16 noise_level; /* 27 .. 154 */ +} __packed; + + +/* netdevice private ioctls (used, e.g., with iwpriv from user space) */ + +/* New wireless extensions API - SET/GET convention (even ioctl numbers are + * root only) + */ +#define PRISM2_IOCTL_PRISM2_PARAM (SIOCIWFIRSTPRIV + 0) +#define PRISM2_IOCTL_GET_PRISM2_PARAM (SIOCIWFIRSTPRIV + 1) +#define PRISM2_IOCTL_WRITEMIF (SIOCIWFIRSTPRIV + 2) +#define PRISM2_IOCTL_READMIF (SIOCIWFIRSTPRIV + 3) +#define PRISM2_IOCTL_MONITOR (SIOCIWFIRSTPRIV + 4) +#define PRISM2_IOCTL_RESET (SIOCIWFIRSTPRIV + 6) +#define PRISM2_IOCTL_INQUIRE (SIOCIWFIRSTPRIV + 8) +#define PRISM2_IOCTL_WDS_ADD (SIOCIWFIRSTPRIV + 10) +#define PRISM2_IOCTL_WDS_DEL (SIOCIWFIRSTPRIV + 12) +#define PRISM2_IOCTL_SET_RID_WORD (SIOCIWFIRSTPRIV + 14) +#define PRISM2_IOCTL_MACCMD (SIOCIWFIRSTPRIV + 16) +#define PRISM2_IOCTL_ADDMAC (SIOCIWFIRSTPRIV + 18) +#define PRISM2_IOCTL_DELMAC (SIOCIWFIRSTPRIV + 20) +#define PRISM2_IOCTL_KICKMAC (SIOCIWFIRSTPRIV + 22) + +/* following are not in SIOCGIWPRIV list; check permission in the driver code + */ +#define PRISM2_IOCTL_DOWNLOAD (SIOCDEVPRIVATE + 13) +#define PRISM2_IOCTL_HOSTAPD (SIOCDEVPRIVATE + 14) + + +/* PRISM2_IOCTL_PRISM2_PARAM ioctl() subtypes: */ +enum { + /* PRISM2_PARAM_PTYPE = 1, */ /* REMOVED 2003-10-22 */ + PRISM2_PARAM_TXRATECTRL = 2, + PRISM2_PARAM_BEACON_INT = 3, + PRISM2_PARAM_PSEUDO_IBSS = 4, + PRISM2_PARAM_ALC = 5, + /* PRISM2_PARAM_TXPOWER = 6, */ /* REMOVED 2003-10-22 */ + PRISM2_PARAM_DUMP = 7, + PRISM2_PARAM_OTHER_AP_POLICY = 8, + PRISM2_PARAM_AP_MAX_INACTIVITY = 9, + PRISM2_PARAM_AP_BRIDGE_PACKETS = 10, + PRISM2_PARAM_DTIM_PERIOD = 11, + PRISM2_PARAM_AP_NULLFUNC_ACK = 12, + PRISM2_PARAM_MAX_WDS = 13, + PRISM2_PARAM_AP_AUTOM_AP_WDS = 14, + PRISM2_PARAM_AP_AUTH_ALGS = 15, + PRISM2_PARAM_MONITOR_ALLOW_FCSERR = 16, + PRISM2_PARAM_HOST_ENCRYPT = 17, + PRISM2_PARAM_HOST_DECRYPT = 18, + /* PRISM2_PARAM_BUS_MASTER_THRESHOLD_RX = 19, REMOVED 2005-08-14 */ + /* PRISM2_PARAM_BUS_MASTER_THRESHOLD_TX = 20, REMOVED 2005-08-14 */ + PRISM2_PARAM_HOST_ROAMING = 21, + PRISM2_PARAM_BCRX_STA_KEY = 22, + PRISM2_PARAM_IEEE_802_1X = 23, + PRISM2_PARAM_ANTSEL_TX = 24, + PRISM2_PARAM_ANTSEL_RX = 25, + PRISM2_PARAM_MONITOR_TYPE = 26, + PRISM2_PARAM_WDS_TYPE = 27, + PRISM2_PARAM_HOSTSCAN = 28, + PRISM2_PARAM_AP_SCAN = 29, + PRISM2_PARAM_ENH_SEC = 30, + PRISM2_PARAM_IO_DEBUG = 31, + PRISM2_PARAM_BASIC_RATES = 32, + PRISM2_PARAM_OPER_RATES = 33, + PRISM2_PARAM_HOSTAPD = 34, + PRISM2_PARAM_HOSTAPD_STA = 35, + PRISM2_PARAM_WPA = 36, + PRISM2_PARAM_PRIVACY_INVOKED = 37, + PRISM2_PARAM_TKIP_COUNTERMEASURES = 38, + PRISM2_PARAM_DROP_UNENCRYPTED = 39, + PRISM2_PARAM_SCAN_CHANNEL_MASK = 40, +}; + +enum { HOSTAP_ANTSEL_DO_NOT_TOUCH = 0, HOSTAP_ANTSEL_DIVERSITY = 1, + HOSTAP_ANTSEL_LOW = 2, HOSTAP_ANTSEL_HIGH = 3 }; + + +/* PRISM2_IOCTL_MACCMD ioctl() subcommands: */ +enum { AP_MAC_CMD_POLICY_OPEN = 0, AP_MAC_CMD_POLICY_ALLOW = 1, + AP_MAC_CMD_POLICY_DENY = 2, AP_MAC_CMD_FLUSH = 3, + AP_MAC_CMD_KICKALL = 4 }; + + +/* PRISM2_IOCTL_DOWNLOAD ioctl() dl_cmd: */ +enum { + PRISM2_DOWNLOAD_VOLATILE = 1 /* RAM */, + /* Note! Old versions of prism2_srec have a fatal error in CRC-16 + * calculation, which will corrupt all non-volatile downloads. + * PRISM2_DOWNLOAD_NON_VOLATILE used to be 2, but it is now 3 to + * prevent use of old versions of prism2_srec for non-volatile + * download. */ + PRISM2_DOWNLOAD_NON_VOLATILE = 3 /* FLASH */, + PRISM2_DOWNLOAD_VOLATILE_GENESIS = 4 /* RAM in Genesis mode */, + /* Persistent versions of volatile download commands (keep firmware + * data in memory and automatically re-download after hw_reset */ + PRISM2_DOWNLOAD_VOLATILE_PERSISTENT = 5, + PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT = 6, +}; + +struct prism2_download_param { + u32 dl_cmd; + u32 start_addr; + u32 num_areas; + struct prism2_download_area { + u32 addr; /* wlan card address */ + u32 len; + void __user *ptr; /* pointer to data in user space */ + } data[0]; +}; + +#define PRISM2_MAX_DOWNLOAD_AREA_LEN 131072 +#define PRISM2_MAX_DOWNLOAD_LEN 262144 + + +/* PRISM2_IOCTL_HOSTAPD ioctl() cmd: */ +enum { + PRISM2_HOSTAPD_FLUSH = 1, + PRISM2_HOSTAPD_ADD_STA = 2, + PRISM2_HOSTAPD_REMOVE_STA = 3, + PRISM2_HOSTAPD_GET_INFO_STA = 4, + /* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */ + PRISM2_SET_ENCRYPTION = 6, + PRISM2_GET_ENCRYPTION = 7, + PRISM2_HOSTAPD_SET_FLAGS_STA = 8, + PRISM2_HOSTAPD_GET_RID = 9, + PRISM2_HOSTAPD_SET_RID = 10, + PRISM2_HOSTAPD_SET_ASSOC_AP_ADDR = 11, + PRISM2_HOSTAPD_SET_GENERIC_ELEMENT = 12, + PRISM2_HOSTAPD_MLME = 13, + PRISM2_HOSTAPD_SCAN_REQ = 14, + PRISM2_HOSTAPD_STA_CLEAR_STATS = 15, +}; + +#define PRISM2_HOSTAPD_MAX_BUF_SIZE 1024 +#define PRISM2_HOSTAPD_RID_HDR_LEN \ +offsetof(struct prism2_hostapd_param, u.rid.data) +#define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \ +offsetof(struct prism2_hostapd_param, u.generic_elem.data) + +/* Maximum length for algorithm names (-1 for nul termination) used in ioctl() + */ +#define HOSTAP_CRYPT_ALG_NAME_LEN 16 + + +struct prism2_hostapd_param { + u32 cmd; + u8 sta_addr[ETH_ALEN]; + union { + struct { + u16 aid; + u16 capability; + u8 tx_supp_rates; + } add_sta; + struct { + u32 inactive_sec; + } get_info_sta; + struct { + u8 alg[HOSTAP_CRYPT_ALG_NAME_LEN]; + u32 flags; + u32 err; + u8 idx; + u8 seq[8]; /* sequence counter (set: RX, get: TX) */ + u16 key_len; + u8 key[0]; + } crypt; + struct { + u32 flags_and; + u32 flags_or; + } set_flags_sta; + struct { + u16 rid; + u16 len; + u8 data[0]; + } rid; + struct { + u8 len; + u8 data[0]; + } generic_elem; + struct { +#define MLME_STA_DEAUTH 0 +#define MLME_STA_DISASSOC 1 + u16 cmd; + u16 reason_code; + } mlme; + struct { + u8 ssid_len; + u8 ssid[32]; + } scan_req; + } u; +}; + +#define HOSTAP_CRYPT_FLAG_SET_TX_KEY BIT(0) +#define HOSTAP_CRYPT_FLAG_PERMANENT BIT(1) + +#define HOSTAP_CRYPT_ERR_UNKNOWN_ALG 2 +#define HOSTAP_CRYPT_ERR_UNKNOWN_ADDR 3 +#define HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED 4 +#define HOSTAP_CRYPT_ERR_KEY_SET_FAILED 5 +#define HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED 6 +#define HOSTAP_CRYPT_ERR_CARD_CONF_FAILED 7 + + +#endif /* HOSTAP_COMMON_H */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_config.h b/drivers/net/wireless/intersil/hostap/hostap_config.h new file mode 100644 index 000000000..2c8f71f0e --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_config.h @@ -0,0 +1,48 @@ +#ifndef HOSTAP_CONFIG_H +#define HOSTAP_CONFIG_H + +/* In the previous versions of Host AP driver, support for user space version + * of IEEE 802.11 management (hostapd) used to be disabled in the default + * configuration. From now on, support for hostapd is always included and it is + * possible to disable kernel driver version of IEEE 802.11 management with a + * separate define, PRISM2_NO_KERNEL_IEEE80211_MGMT. */ +/* #define PRISM2_NO_KERNEL_IEEE80211_MGMT */ + +/* Maximum number of events handler per one interrupt */ +#define PRISM2_MAX_INTERRUPT_EVENTS 20 + +/* Include code for downloading firmware images into volatile RAM. */ +#define PRISM2_DOWNLOAD_SUPPORT + +/* Allow kernel configuration to enable download support. */ +#if !defined(PRISM2_DOWNLOAD_SUPPORT) && defined(CONFIG_HOSTAP_FIRMWARE) +#define PRISM2_DOWNLOAD_SUPPORT +#endif + +/* Allow kernel configuration to enable non-volatile download support. */ +#ifdef CONFIG_HOSTAP_FIRMWARE_NVRAM +#define PRISM2_NON_VOLATILE_DOWNLOAD +#endif + +/* Save low-level I/O for debugging. This should not be enabled in normal use. + */ +/* #define PRISM2_IO_DEBUG */ + +/* Following defines can be used to remove unneeded parts of the driver, e.g., + * to limit the size of the kernel module. Definitions can be added here in + * hostap_config.h or they can be added to make command with ccflags-y, + * e.g., + * 'make pccard ccflags-y="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"' + */ + +/* Do not include debug messages into the driver */ +/* #define PRISM2_NO_DEBUG */ + +/* Do not include /proc/net/prism2/wlan#/{registers,debug} */ +/* #define PRISM2_NO_PROCFS_DEBUG */ + +/* Do not include station functionality (i.e., allow only Master (Host AP) mode + */ +/* #define PRISM2_NO_STATION_MODES */ + +#endif /* HOSTAP_CONFIG_H */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_cs.c b/drivers/net/wireless/intersil/hostap/hostap_cs.c new file mode 100644 index 000000000..74f63b7bf --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_cs.c @@ -0,0 +1,710 @@ +#define PRISM2_PCCARD + +#include <linux/module.h> +#include <linux/if.h> +#include <linux/slab.h> +#include <linux/wait.h> +#include <linux/timer.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/workqueue.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> + +#include <asm/io.h> + +#include "hostap_wlan.h" + + +static char *dev_info = "hostap_cs"; + +MODULE_AUTHOR("Jouni Malinen"); +MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN " + "cards (PC Card)."); +MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PC Card)"); +MODULE_LICENSE("GPL"); + + +static int ignore_cis_vcc; +module_param(ignore_cis_vcc, int, 0444); +MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry"); + + +/* struct local_info::hw_priv */ +struct hostap_cs_priv { + struct pcmcia_device *link; + int sandisk_connectplus; +}; + + +#ifdef PRISM2_IO_DEBUG + +static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); + outb(v, dev->base_addr + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u8 v; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + v = inb(dev->base_addr + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); + outw(v, dev->base_addr + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u16 v; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + v = inw(dev->base_addr + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outsw_debug(struct net_device *dev, int a, + u8 *buf, int wc) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc); + outsw(dev->base_addr + a, buf, wc); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline void hfa384x_insw_debug(struct net_device *dev, int a, + u8 *buf, int wc) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc); + insw(dev->base_addr + a, buf, wc); + spin_unlock_irqrestore(&local->lock, flags); +} + +#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v)) +#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a)) +#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v)) +#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a)) +#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc)) +#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc)) + +#else /* PRISM2_IO_DEBUG */ + +#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a)) +#define HFA384X_INB(a) inb(dev->base_addr + (a)) +#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a)) +#define HFA384X_INW(a) inw(dev->base_addr + (a)) +#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc) +#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc) + +#endif /* PRISM2_IO_DEBUG */ + + +static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf, + int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + if (len / 2) + HFA384X_INSW(d_off, buf, len / 2); + pos += len / 2; + + if (len & 1) + *((char *) pos) = HFA384X_INB(d_off); + + return 0; +} + + +static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + if (len / 2) + HFA384X_OUTSW(d_off, buf, len / 2); + pos += len / 2; + + if (len & 1) + HFA384X_OUTB(*((char *) pos), d_off); + + return 0; +} + + +/* FIX: This might change at some point.. */ +#include "hostap_hw.c" + + + +static void prism2_detach(struct pcmcia_device *p_dev); +static void prism2_release(u_long arg); +static int prism2_config(struct pcmcia_device *link); + + +static int prism2_pccard_card_present(local_info_t *local) +{ + struct hostap_cs_priv *hw_priv = local->hw_priv; + if (hw_priv != NULL && hw_priv->link != NULL && pcmcia_dev_present(hw_priv->link)) + return 1; + return 0; +} + + +/* + * SanDisk CompactFlash WLAN Flashcard - Product Manual v1.0 + * Document No. 20-10-00058, January 2004 + * http://www.sandisk.com/pdf/industrial/ProdManualCFWLANv1.0.pdf + */ +#define SANDISK_WLAN_ACTIVATION_OFF 0x40 +#define SANDISK_HCR_OFF 0x42 + + +static void sandisk_set_iobase(local_info_t *local) +{ + int res; + struct hostap_cs_priv *hw_priv = local->hw_priv; + + res = pcmcia_write_config_byte(hw_priv->link, 0x10, + hw_priv->link->resource[0]->start & 0x00ff); + if (res != 0) { + printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -" + " res=%d\n", res); + } + udelay(10); + + res = pcmcia_write_config_byte(hw_priv->link, 0x12, + (hw_priv->link->resource[0]->start >> 8) & 0x00ff); + if (res != 0) { + printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -" + " res=%d\n", res); + } +} + + +static void sandisk_write_hcr(local_info_t *local, int hcr) +{ + struct net_device *dev = local->dev; + int i; + + HFA384X_OUTB(0x80, SANDISK_WLAN_ACTIVATION_OFF); + udelay(50); + for (i = 0; i < 10; i++) { + HFA384X_OUTB(hcr, SANDISK_HCR_OFF); + } + udelay(55); + HFA384X_OUTB(0x45, SANDISK_WLAN_ACTIVATION_OFF); +} + + +static int sandisk_enable_wireless(struct net_device *dev) +{ + int res, ret = 0; + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + struct hostap_cs_priv *hw_priv = local->hw_priv; + + if (resource_size(hw_priv->link->resource[0]) < 0x42) { + /* Not enough ports to be SanDisk multi-function card */ + ret = -ENODEV; + goto done; + } + + if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) { + /* No SanDisk manfid found */ + ret = -ENODEV; + goto done; + } + + if (hw_priv->link->socket->functions < 2) { + /* No multi-function links found */ + ret = -ENODEV; + goto done; + } + + printk(KERN_DEBUG "%s: Multi-function SanDisk ConnectPlus detected" + " - using vendor-specific initialization\n", dev->name); + hw_priv->sandisk_connectplus = 1; + + res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, + COR_SOFT_RESET); + if (res != 0) { + printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n", + dev->name, res); + goto done; + } + mdelay(5); + + /* + * Do not enable interrupts here to avoid some bogus events. Interrupts + * will be enabled during the first cor_sreset call. + */ + res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, + (COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | + COR_FUNC_ENA)); + if (res != 0) { + printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n", + dev->name, res); + goto done; + } + mdelay(5); + + sandisk_set_iobase(local); + + HFA384X_OUTB(0xc5, SANDISK_WLAN_ACTIVATION_OFF); + udelay(10); + HFA384X_OUTB(0x4b, SANDISK_WLAN_ACTIVATION_OFF); + udelay(10); + +done: + return ret; +} + + +static void prism2_pccard_cor_sreset(local_info_t *local) +{ + int res; + u8 val; + struct hostap_cs_priv *hw_priv = local->hw_priv; + + if (!prism2_pccard_card_present(local)) + return; + + res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &val); + if (res != 0) { + printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n", + res); + return; + } + printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n", + val); + + val |= COR_SOFT_RESET; + res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val); + if (res != 0) { + printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n", + res); + return; + } + + mdelay(hw_priv->sandisk_connectplus ? 5 : 2); + + val &= ~COR_SOFT_RESET; + if (hw_priv->sandisk_connectplus) + val |= COR_IREQ_ENA; + res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val); + if (res != 0) { + printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n", + res); + return; + } + + mdelay(hw_priv->sandisk_connectplus ? 5 : 2); + + if (hw_priv->sandisk_connectplus) + sandisk_set_iobase(local); +} + + +static void prism2_pccard_genesis_reset(local_info_t *local, int hcr) +{ + int res; + u8 old_cor; + struct hostap_cs_priv *hw_priv = local->hw_priv; + + if (!prism2_pccard_card_present(local)) + return; + + if (hw_priv->sandisk_connectplus) { + sandisk_write_hcr(local, hcr); + return; + } + + res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &old_cor); + if (res != 0) { + printk(KERN_DEBUG "%s failed 1 (%d)\n", __func__, res); + return; + } + printk(KERN_DEBUG "%s: original COR %02x\n", __func__, old_cor); + + res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, + old_cor | COR_SOFT_RESET); + if (res != 0) { + printk(KERN_DEBUG "%s failed 2 (%d)\n", __func__, res); + return; + } + + mdelay(10); + + /* Setup Genesis mode */ + res = pcmcia_write_config_byte(hw_priv->link, CISREG_CCSR, hcr); + if (res != 0) { + printk(KERN_DEBUG "%s failed 3 (%d)\n", __func__, res); + return; + } + mdelay(10); + + res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, + old_cor & ~COR_SOFT_RESET); + if (res != 0) { + printk(KERN_DEBUG "%s failed 4 (%d)\n", __func__, res); + return; + } + + mdelay(10); +} + + +static struct prism2_helper_functions prism2_pccard_funcs = +{ + .card_present = prism2_pccard_card_present, + .cor_sreset = prism2_pccard_cor_sreset, + .genesis_reset = prism2_pccard_genesis_reset, + .hw_type = HOSTAP_HW_PCCARD, +}; + + +/* allocate local data and register with CardServices + * initialize dev_link structure, but do not configure the card yet */ +static int hostap_cs_probe(struct pcmcia_device *p_dev) +{ + int ret; + + PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info); + + ret = prism2_config(p_dev); + if (ret) { + PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n"); + } + + return ret; +} + + +static void prism2_detach(struct pcmcia_device *link) +{ + PDEBUG(DEBUG_FLOW, "prism2_detach\n"); + + prism2_release((u_long)link); + + /* release net devices */ + if (link->priv) { + struct hostap_cs_priv *hw_priv; + struct net_device *dev; + struct hostap_interface *iface; + dev = link->priv; + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + prism2_free_local_data(dev); + kfree(hw_priv); + } +} + + +static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + if (p_dev->config_index == 0) + return -EINVAL; + + return pcmcia_request_io(p_dev); +} + +static int prism2_config(struct pcmcia_device *link) +{ + struct net_device *dev; + struct hostap_interface *iface; + local_info_t *local; + int ret; + struct hostap_cs_priv *hw_priv; + unsigned long flags; + + PDEBUG(DEBUG_FLOW, "prism2_config()\n"); + + hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL); + if (hw_priv == NULL) { + ret = -ENOMEM; + goto failed; + } + + /* Look for an appropriate configuration table entry in the CIS */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | + CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; + ret = pcmcia_loop_config(link, prism2_config_check, NULL); + if (ret) { + if (!ignore_cis_vcc) + printk(KERN_ERR "GetNextTuple(): No matching " + "CIS configuration. Maybe you need the " + "ignore_cis_vcc=1 parameter.\n"); + goto failed; + } + + /* Need to allocate net_device before requesting IRQ handler */ + dev = prism2_init_local_data(&prism2_pccard_funcs, 0, + &link->dev); + if (!dev) { + ret = -ENOMEM; + goto failed; + } + link->priv = dev; + + iface = netdev_priv(dev); + local = iface->local; + local->hw_priv = hw_priv; + hw_priv->link = link; + + /* + * We enable IRQ here, but IRQ handler will not proceed + * until dev->base_addr is set below. This protect us from + * receive interrupts when driver is not initialized. + */ + ret = pcmcia_request_irq(link, prism2_interrupt); + if (ret) + goto failed; + + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + spin_lock_irqsave(&local->irq_init_lock, flags); + dev->irq = link->irq; + dev->base_addr = link->resource[0]->start; + spin_unlock_irqrestore(&local->irq_init_lock, flags); + + local->shutdown = 0; + + sandisk_enable_wireless(dev); + + ret = prism2_hw_config(dev, 1); + if (!ret) + ret = hostap_hw_ready(dev); + + return ret; + + failed: + kfree(hw_priv); + prism2_release((u_long)link); + return ret; +} + + +static void prism2_release(u_long arg) +{ + struct pcmcia_device *link = (struct pcmcia_device *)arg; + + PDEBUG(DEBUG_FLOW, "prism2_release\n"); + + if (link->priv) { + struct net_device *dev = link->priv; + struct hostap_interface *iface; + + iface = netdev_priv(dev); + prism2_hw_shutdown(dev, 0); + iface->local->shutdown = 1; + } + + pcmcia_disable_device(link); + PDEBUG(DEBUG_FLOW, "release - done\n"); +} + +static int hostap_cs_suspend(struct pcmcia_device *link) +{ + struct net_device *dev = (struct net_device *) link->priv; + int dev_open = 0; + struct hostap_interface *iface = NULL; + + if (!dev) + return -ENODEV; + + iface = netdev_priv(dev); + + PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info); + if (iface && iface->local) + dev_open = iface->local->num_dev_open > 0; + if (dev_open) { + netif_stop_queue(dev); + netif_device_detach(dev); + } + prism2_suspend(dev); + + return 0; +} + +static int hostap_cs_resume(struct pcmcia_device *link) +{ + struct net_device *dev = (struct net_device *) link->priv; + int dev_open = 0; + struct hostap_interface *iface = NULL; + + if (!dev) + return -ENODEV; + + iface = netdev_priv(dev); + + PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info); + + if (iface && iface->local) + dev_open = iface->local->num_dev_open > 0; + + prism2_hw_shutdown(dev, 1); + prism2_hw_config(dev, dev_open ? 0 : 1); + if (dev_open) { + netif_device_attach(dev); + netif_start_queue(dev); + } + + return 0; +} + +static const struct pcmcia_device_id hostap_cs_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), + PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), + PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x3301), + PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b), + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001), + PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001), + PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), +/* PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), conflict with pcnet_cs */ + PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010), + PCMCIA_DEVICE_MANF_CARD(0x0126, 0x0002), + PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0xd601, 0x0005, "ADLINK 345 CF", + 0x2d858104), + PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL", + 0x74c5e40d), + PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil", + 0x4b801a17), + PCMCIA_DEVICE_MANF_CARD_PROD_ID3(0x0156, 0x0002, "Version 01.02", + 0x4b74baa0), + PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus", + 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_PROD_ID123( + "Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02", + 0xe6ec52ce, 0x08649af2, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID123( + "Canon", "Wireless LAN CF Card K30225", "Version 01.00", + 0x96ef6fe2, 0x263fcbab, 0xa57adb8c), + PCMCIA_DEVICE_PROD_ID123( + "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02", + 0x71b18589, 0xb6f1b0ab, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID123( + "Instant Wireless ", " Network PC CARD", "Version 01.02", + 0x11d901af, 0x6e9bd926, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID123( + "SMC", "SMC2632W", "Version 01.02", + 0xc4f8b18b, 0x474a1f2a, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", + 0x2decece3, 0x82067c18), + PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", + 0x54f7c49c, 0x15a75e5b), + PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", + 0x74c5e40d, 0xdb472a18), + PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", + 0x0733cc81, 0x0c52f395), + PCMCIA_DEVICE_PROD_ID12( + "ZoomAir 11Mbps High", "Rate wireless Networking", + 0x273fe3db, 0x32a1eaee), + PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", + 0xa37434e9, 0x9762e8f1), + PCMCIA_DEVICE_PROD_ID123( + "Pretec", "CompactWLAN Card 802.11b", "2.5", + 0x1cadd3e5, 0xe697636c, 0x7a5bfcf1), + PCMCIA_DEVICE_PROD_ID123( + "U.S. Robotics", "IEEE 802.11b PC-CARD", "Version 01.02", + 0xc7b8df9d, 0x1700d087, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID123( + "Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", + "Ver. 1.00", + 0x5cd01705, 0x4271660f, 0x9d08ee12), + PCMCIA_DEVICE_PROD_ID123( + "Wireless LAN" , "11Mbps PC Card", "Version 01.02", + 0x4b8870ff, 0x70e946d1, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092), + PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2), + PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b), + PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39), + PCMCIA_DEVICE_NULL +}; +MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids); + + +static struct pcmcia_driver hostap_driver = { + .name = "hostap_cs", + .probe = hostap_cs_probe, + .remove = prism2_detach, + .owner = THIS_MODULE, + .id_table = hostap_cs_ids, + .suspend = hostap_cs_suspend, + .resume = hostap_cs_resume, +}; +module_pcmcia_driver(hostap_driver); diff --git a/drivers/net/wireless/intersil/hostap/hostap_download.c b/drivers/net/wireless/intersil/hostap/hostap_download.c new file mode 100644 index 000000000..705fe668b --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_download.c @@ -0,0 +1,812 @@ +static int prism2_enable_aux_port(struct net_device *dev, int enable) +{ + u16 val, reg; + int i, tries; + unsigned long flags; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + if (enable) { + PDEBUG(DEBUG_EXTRA2, "%s: no PRI f/w - assuming Aux " + "port is already enabled\n", dev->name); + } + return 0; + } + + spin_lock_irqsave(&local->cmdlock, flags); + + /* wait until busy bit is clear */ + tries = HFA384X_CMD_BUSY_TIMEOUT; + while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) { + tries--; + udelay(1); + } + if (tries == 0) { + reg = HFA384X_INW(HFA384X_CMD_OFF); + spin_unlock_irqrestore(&local->cmdlock, flags); + printk("%s: prism2_enable_aux_port - timeout - reg=0x%04x\n", + dev->name, reg); + return -ETIMEDOUT; + } + + val = HFA384X_INW(HFA384X_CONTROL_OFF); + + if (enable) { + HFA384X_OUTW(HFA384X_AUX_MAGIC0, HFA384X_PARAM0_OFF); + HFA384X_OUTW(HFA384X_AUX_MAGIC1, HFA384X_PARAM1_OFF); + HFA384X_OUTW(HFA384X_AUX_MAGIC2, HFA384X_PARAM2_OFF); + + if ((val & HFA384X_AUX_PORT_MASK) != HFA384X_AUX_PORT_DISABLED) + printk("prism2_enable_aux_port: was not disabled!?\n"); + val &= ~HFA384X_AUX_PORT_MASK; + val |= HFA384X_AUX_PORT_ENABLE; + } else { + HFA384X_OUTW(0, HFA384X_PARAM0_OFF); + HFA384X_OUTW(0, HFA384X_PARAM1_OFF); + HFA384X_OUTW(0, HFA384X_PARAM2_OFF); + + if ((val & HFA384X_AUX_PORT_MASK) != HFA384X_AUX_PORT_ENABLED) + printk("prism2_enable_aux_port: was not enabled!?\n"); + val &= ~HFA384X_AUX_PORT_MASK; + val |= HFA384X_AUX_PORT_DISABLE; + } + HFA384X_OUTW(val, HFA384X_CONTROL_OFF); + + udelay(5); + + i = 10000; + while (i > 0) { + val = HFA384X_INW(HFA384X_CONTROL_OFF); + val &= HFA384X_AUX_PORT_MASK; + + if ((enable && val == HFA384X_AUX_PORT_ENABLED) || + (!enable && val == HFA384X_AUX_PORT_DISABLED)) + break; + + udelay(10); + i--; + } + + spin_unlock_irqrestore(&local->cmdlock, flags); + + if (i == 0) { + printk("prism2_enable_aux_port(%d) timed out\n", + enable); + return -ETIMEDOUT; + } + + return 0; +} + + +static int hfa384x_from_aux(struct net_device *dev, unsigned int addr, int len, + void *buf) +{ + u16 page, offset; + if (addr & 1 || len & 1) + return -1; + + page = addr >> 7; + offset = addr & 0x7f; + + HFA384X_OUTW(page, HFA384X_AUXPAGE_OFF); + HFA384X_OUTW(offset, HFA384X_AUXOFFSET_OFF); + + udelay(5); + +#ifdef PRISM2_PCI + { + __le16 *pos = (__le16 *) buf; + while (len > 0) { + *pos++ = HFA384X_INW_DATA(HFA384X_AUXDATA_OFF); + len -= 2; + } + } +#else /* PRISM2_PCI */ + HFA384X_INSW(HFA384X_AUXDATA_OFF, buf, len / 2); +#endif /* PRISM2_PCI */ + + return 0; +} + + +static int hfa384x_to_aux(struct net_device *dev, unsigned int addr, int len, + void *buf) +{ + u16 page, offset; + if (addr & 1 || len & 1) + return -1; + + page = addr >> 7; + offset = addr & 0x7f; + + HFA384X_OUTW(page, HFA384X_AUXPAGE_OFF); + HFA384X_OUTW(offset, HFA384X_AUXOFFSET_OFF); + + udelay(5); + +#ifdef PRISM2_PCI + { + __le16 *pos = (__le16 *) buf; + while (len > 0) { + HFA384X_OUTW_DATA(*pos++, HFA384X_AUXDATA_OFF); + len -= 2; + } + } +#else /* PRISM2_PCI */ + HFA384X_OUTSW(HFA384X_AUXDATA_OFF, buf, len / 2); +#endif /* PRISM2_PCI */ + + return 0; +} + + +static int prism2_pda_ok(u8 *buf) +{ + __le16 *pda = (__le16 *) buf; + int pos; + u16 len, pdr; + + if (buf[0] == 0xff && buf[1] == 0x00 && buf[2] == 0xff && + buf[3] == 0x00) + return 0; + + pos = 0; + while (pos + 1 < PRISM2_PDA_SIZE / 2) { + len = le16_to_cpu(pda[pos]); + pdr = le16_to_cpu(pda[pos + 1]); + if (len == 0 || pos + len > PRISM2_PDA_SIZE / 2) + return 0; + + if (pdr == 0x0000 && len == 2) { + /* PDA end found */ + return 1; + } + + pos += len + 1; + } + + return 0; +} + + +#define prism2_download_aux_dump_npages 65536 + +struct prism2_download_aux_dump { + local_info_t *local; + u16 page[0x80]; +}; + +static int prism2_download_aux_dump_proc_show(struct seq_file *m, void *v) +{ + struct prism2_download_aux_dump *ctx = m->private; + + hfa384x_from_aux(ctx->local->dev, (unsigned long)v - 1, 0x80, ctx->page); + seq_write(m, ctx->page, 0x80); + return 0; +} + +static void *prism2_download_aux_dump_proc_start(struct seq_file *m, loff_t *_pos) +{ + struct prism2_download_aux_dump *ctx = m->private; + prism2_enable_aux_port(ctx->local->dev, 1); + if (*_pos >= prism2_download_aux_dump_npages) + return NULL; + return (void *)((unsigned long)*_pos + 1); +} + +static void *prism2_download_aux_dump_proc_next(struct seq_file *m, void *v, loff_t *_pos) +{ + ++*_pos; + if (*_pos >= prism2_download_aux_dump_npages) + return NULL; + return (void *)((unsigned long)*_pos + 1); +} + +static void prism2_download_aux_dump_proc_stop(struct seq_file *m, void *v) +{ + struct prism2_download_aux_dump *ctx = m->private; + prism2_enable_aux_port(ctx->local->dev, 0); +} + +static const struct seq_operations prism2_download_aux_dump_proc_seqops = { + .start = prism2_download_aux_dump_proc_start, + .next = prism2_download_aux_dump_proc_next, + .stop = prism2_download_aux_dump_proc_stop, + .show = prism2_download_aux_dump_proc_show, +}; + +static int prism2_download_aux_dump_proc_open(struct inode *inode, struct file *file) +{ + int ret = seq_open_private(file, &prism2_download_aux_dump_proc_seqops, + sizeof(struct prism2_download_aux_dump)); + if (ret == 0) { + struct seq_file *m = file->private_data; + m->private = PDE_DATA(inode); + } + return ret; +} + +static const struct file_operations prism2_download_aux_dump_proc_fops = { + .open = prism2_download_aux_dump_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release_private, +}; + + +static u8 * prism2_read_pda(struct net_device *dev) +{ + u8 *buf; + int res, i, found = 0; +#define NUM_PDA_ADDRS 4 + unsigned int pda_addr[NUM_PDA_ADDRS] = { + 0x7f0000 /* others than HFA3841 */, + 0x3f0000 /* HFA3841 */, + 0x390000 /* apparently used in older cards */, + 0x7f0002 /* Intel PRO/Wireless 2011B (PCI) */, + }; + + buf = kmalloc(PRISM2_PDA_SIZE, GFP_KERNEL); + if (buf == NULL) + return NULL; + + /* Note: wlan card should be in initial state (just after init cmd) + * and no other operations should be performed concurrently. */ + + prism2_enable_aux_port(dev, 1); + + for (i = 0; i < NUM_PDA_ADDRS; i++) { + PDEBUG(DEBUG_EXTRA2, "%s: trying to read PDA from 0x%08x", + dev->name, pda_addr[i]); + res = hfa384x_from_aux(dev, pda_addr[i], PRISM2_PDA_SIZE, buf); + if (res) + continue; + if (res == 0 && prism2_pda_ok(buf)) { + PDEBUG2(DEBUG_EXTRA2, ": OK\n"); + found = 1; + break; + } else { + PDEBUG2(DEBUG_EXTRA2, ": failed\n"); + } + } + + prism2_enable_aux_port(dev, 0); + + if (!found) { + printk(KERN_DEBUG "%s: valid PDA not found\n", dev->name); + kfree(buf); + buf = NULL; + } + + return buf; +} + + +static int prism2_download_volatile(local_info_t *local, + struct prism2_download_data *param) +{ + struct net_device *dev = local->dev; + int ret = 0, i; + u16 param0, param1; + + if (local->hw_downloading) { + printk(KERN_WARNING "%s: Already downloading - aborting new " + "request\n", dev->name); + return -1; + } + + local->hw_downloading = 1; + if (local->pri_only) { + hfa384x_disable_interrupts(dev); + } else { + prism2_hw_shutdown(dev, 0); + + if (prism2_hw_init(dev, 0)) { + printk(KERN_WARNING "%s: Could not initialize card for" + " download\n", dev->name); + ret = -1; + goto out; + } + } + + if (prism2_enable_aux_port(dev, 1)) { + printk(KERN_WARNING "%s: Could not enable AUX port\n", + dev->name); + ret = -1; + goto out; + } + + param0 = param->start_addr & 0xffff; + param1 = param->start_addr >> 16; + + HFA384X_OUTW(0, HFA384X_PARAM2_OFF); + HFA384X_OUTW(param1, HFA384X_PARAM1_OFF); + if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | + (HFA384X_PROGMODE_ENABLE_VOLATILE << 8), + param0)) { + printk(KERN_WARNING "%s: Download command execution failed\n", + dev->name); + ret = -1; + goto out; + } + + for (i = 0; i < param->num_areas; i++) { + PDEBUG(DEBUG_EXTRA2, "%s: Writing %d bytes at 0x%08x\n", + dev->name, param->data[i].len, param->data[i].addr); + if (hfa384x_to_aux(dev, param->data[i].addr, + param->data[i].len, param->data[i].data)) { + printk(KERN_WARNING "%s: RAM download at 0x%08x " + "(len=%d) failed\n", dev->name, + param->data[i].addr, param->data[i].len); + ret = -1; + goto out; + } + } + + HFA384X_OUTW(param1, HFA384X_PARAM1_OFF); + HFA384X_OUTW(0, HFA384X_PARAM2_OFF); + if (hfa384x_cmd_no_wait(dev, HFA384X_CMDCODE_DOWNLOAD | + (HFA384X_PROGMODE_DISABLE << 8), param0)) { + printk(KERN_WARNING "%s: Download command execution failed\n", + dev->name); + ret = -1; + goto out; + } + /* ProgMode disable causes the hardware to restart itself from the + * given starting address. Give hw some time and ACK command just in + * case restart did not happen. */ + mdelay(5); + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + + if (prism2_enable_aux_port(dev, 0)) { + printk(KERN_DEBUG "%s: Disabling AUX port failed\n", + dev->name); + /* continue anyway.. restart should have taken care of this */ + } + + mdelay(5); + local->hw_downloading = 0; + if (prism2_hw_config(dev, 2)) { + printk(KERN_WARNING "%s: Card configuration after RAM " + "download failed\n", dev->name); + ret = -1; + goto out; + } + + out: + local->hw_downloading = 0; + return ret; +} + + +static int prism2_enable_genesis(local_info_t *local, int hcr) +{ + struct net_device *dev = local->dev; + u8 initseq[4] = { 0x00, 0xe1, 0xa1, 0xff }; + u8 readbuf[4]; + + printk(KERN_DEBUG "%s: test Genesis mode with HCR 0x%02x\n", + dev->name, hcr); + local->func->cor_sreset(local); + hfa384x_to_aux(dev, 0x7e0038, sizeof(initseq), initseq); + local->func->genesis_reset(local, hcr); + + /* Readback test */ + hfa384x_from_aux(dev, 0x7e0038, sizeof(readbuf), readbuf); + hfa384x_to_aux(dev, 0x7e0038, sizeof(initseq), initseq); + hfa384x_from_aux(dev, 0x7e0038, sizeof(readbuf), readbuf); + + if (memcmp(initseq, readbuf, sizeof(initseq)) == 0) { + printk(KERN_DEBUG "Readback test succeeded, HCR 0x%02x\n", + hcr); + return 0; + } else { + printk(KERN_DEBUG "Readback test failed, HCR 0x%02x " + "write %02x %02x %02x %02x read %02x %02x %02x %02x\n", + hcr, initseq[0], initseq[1], initseq[2], initseq[3], + readbuf[0], readbuf[1], readbuf[2], readbuf[3]); + return 1; + } +} + + +static int prism2_get_ram_size(local_info_t *local) +{ + int ret; + + /* Try to enable genesis mode; 0x1F for x8 SRAM or 0x0F for x16 SRAM */ + if (prism2_enable_genesis(local, 0x1f) == 0) + ret = 8; + else if (prism2_enable_genesis(local, 0x0f) == 0) + ret = 16; + else + ret = -1; + + /* Disable genesis mode */ + local->func->genesis_reset(local, ret == 16 ? 0x07 : 0x17); + + return ret; +} + + +static int prism2_download_genesis(local_info_t *local, + struct prism2_download_data *param) +{ + struct net_device *dev = local->dev; + int ram16 = 0, i; + int ret = 0; + + if (local->hw_downloading) { + printk(KERN_WARNING "%s: Already downloading - aborting new " + "request\n", dev->name); + return -EBUSY; + } + + if (!local->func->genesis_reset || !local->func->cor_sreset) { + printk(KERN_INFO "%s: Genesis mode downloading not supported " + "with this hwmodel\n", dev->name); + return -EOPNOTSUPP; + } + + local->hw_downloading = 1; + + if (prism2_enable_aux_port(dev, 1)) { + printk(KERN_DEBUG "%s: failed to enable AUX port\n", + dev->name); + ret = -EIO; + goto out; + } + + if (local->sram_type == -1) { + /* 0x1F for x8 SRAM or 0x0F for x16 SRAM */ + if (prism2_enable_genesis(local, 0x1f) == 0) { + ram16 = 0; + PDEBUG(DEBUG_EXTRA2, "%s: Genesis mode OK using x8 " + "SRAM\n", dev->name); + } else if (prism2_enable_genesis(local, 0x0f) == 0) { + ram16 = 1; + PDEBUG(DEBUG_EXTRA2, "%s: Genesis mode OK using x16 " + "SRAM\n", dev->name); + } else { + printk(KERN_DEBUG "%s: Could not initiate genesis " + "mode\n", dev->name); + ret = -EIO; + goto out; + } + } else { + if (prism2_enable_genesis(local, local->sram_type == 8 ? + 0x1f : 0x0f)) { + printk(KERN_DEBUG "%s: Failed to set Genesis " + "mode (sram_type=%d)\n", dev->name, + local->sram_type); + ret = -EIO; + goto out; + } + ram16 = local->sram_type != 8; + } + + for (i = 0; i < param->num_areas; i++) { + PDEBUG(DEBUG_EXTRA2, "%s: Writing %d bytes at 0x%08x\n", + dev->name, param->data[i].len, param->data[i].addr); + if (hfa384x_to_aux(dev, param->data[i].addr, + param->data[i].len, param->data[i].data)) { + printk(KERN_WARNING "%s: RAM download at 0x%08x " + "(len=%d) failed\n", dev->name, + param->data[i].addr, param->data[i].len); + ret = -EIO; + goto out; + } + } + + PDEBUG(DEBUG_EXTRA2, "Disable genesis mode\n"); + local->func->genesis_reset(local, ram16 ? 0x07 : 0x17); + if (prism2_enable_aux_port(dev, 0)) { + printk(KERN_DEBUG "%s: Failed to disable AUX port\n", + dev->name); + } + + mdelay(5); + local->hw_downloading = 0; + + PDEBUG(DEBUG_EXTRA2, "Trying to initialize card\n"); + /* + * Make sure the INIT command does not generate a command completion + * event by disabling interrupts. + */ + hfa384x_disable_interrupts(dev); + if (prism2_hw_init(dev, 1)) { + printk(KERN_DEBUG "%s: Initialization after genesis mode " + "download failed\n", dev->name); + ret = -EIO; + goto out; + } + + PDEBUG(DEBUG_EXTRA2, "Card initialized - running PRI only\n"); + if (prism2_hw_init2(dev, 1)) { + printk(KERN_DEBUG "%s: Initialization(2) after genesis mode " + "download failed\n", dev->name); + ret = -EIO; + goto out; + } + + out: + local->hw_downloading = 0; + return ret; +} + + +#ifdef PRISM2_NON_VOLATILE_DOWNLOAD +/* Note! Non-volatile downloading functionality has not yet been tested + * thoroughly and it may corrupt flash image and effectively kill the card that + * is being updated. You have been warned. */ + +static inline int prism2_download_block(struct net_device *dev, + u32 addr, u8 *data, + u32 bufaddr, int rest_len) +{ + u16 param0, param1; + int block_len; + + block_len = rest_len < 4096 ? rest_len : 4096; + + param0 = addr & 0xffff; + param1 = addr >> 16; + + HFA384X_OUTW(block_len, HFA384X_PARAM2_OFF); + HFA384X_OUTW(param1, HFA384X_PARAM1_OFF); + + if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | + (HFA384X_PROGMODE_ENABLE_NON_VOLATILE << 8), + param0)) { + printk(KERN_WARNING "%s: Flash download command execution " + "failed\n", dev->name); + return -1; + } + + if (hfa384x_to_aux(dev, bufaddr, block_len, data)) { + printk(KERN_WARNING "%s: flash download at 0x%08x " + "(len=%d) failed\n", dev->name, addr, block_len); + return -1; + } + + HFA384X_OUTW(0, HFA384X_PARAM2_OFF); + HFA384X_OUTW(0, HFA384X_PARAM1_OFF); + if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | + (HFA384X_PROGMODE_PROGRAM_NON_VOLATILE << 8), + 0)) { + printk(KERN_WARNING "%s: Flash write command execution " + "failed\n", dev->name); + return -1; + } + + return block_len; +} + + +static int prism2_download_nonvolatile(local_info_t *local, + struct prism2_download_data *dl) +{ + struct net_device *dev = local->dev; + int ret = 0, i; + struct { + __le16 page; + __le16 offset; + __le16 len; + } dlbuffer; + u32 bufaddr; + + if (local->hw_downloading) { + printk(KERN_WARNING "%s: Already downloading - aborting new " + "request\n", dev->name); + return -1; + } + + ret = local->func->get_rid(dev, HFA384X_RID_DOWNLOADBUFFER, + &dlbuffer, 6, 0); + + if (ret < 0) { + printk(KERN_WARNING "%s: Could not read download buffer " + "parameters\n", dev->name); + goto out; + } + + printk(KERN_DEBUG "Download buffer: %d bytes at 0x%04x:0x%04x\n", + le16_to_cpu(dlbuffer.len), + le16_to_cpu(dlbuffer.page), + le16_to_cpu(dlbuffer.offset)); + + bufaddr = (le16_to_cpu(dlbuffer.page) << 7) + le16_to_cpu(dlbuffer.offset); + + local->hw_downloading = 1; + + if (!local->pri_only) { + prism2_hw_shutdown(dev, 0); + + if (prism2_hw_init(dev, 0)) { + printk(KERN_WARNING "%s: Could not initialize card for" + " download\n", dev->name); + ret = -1; + goto out; + } + } + + hfa384x_disable_interrupts(dev); + + if (prism2_enable_aux_port(dev, 1)) { + printk(KERN_WARNING "%s: Could not enable AUX port\n", + dev->name); + ret = -1; + goto out; + } + + printk(KERN_DEBUG "%s: starting flash download\n", dev->name); + for (i = 0; i < dl->num_areas; i++) { + int rest_len = dl->data[i].len; + int data_off = 0; + + while (rest_len > 0) { + int block_len; + + block_len = prism2_download_block( + dev, dl->data[i].addr + data_off, + dl->data[i].data + data_off, bufaddr, + rest_len); + + if (block_len < 0) { + ret = -1; + goto out; + } + + rest_len -= block_len; + data_off += block_len; + } + } + + HFA384X_OUTW(0, HFA384X_PARAM1_OFF); + HFA384X_OUTW(0, HFA384X_PARAM2_OFF); + if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_DOWNLOAD | + (HFA384X_PROGMODE_DISABLE << 8), 0)) { + printk(KERN_WARNING "%s: Download command execution failed\n", + dev->name); + ret = -1; + goto out; + } + + if (prism2_enable_aux_port(dev, 0)) { + printk(KERN_DEBUG "%s: Disabling AUX port failed\n", + dev->name); + /* continue anyway.. restart should have taken care of this */ + } + + mdelay(5); + + local->func->hw_reset(dev); + local->hw_downloading = 0; + if (prism2_hw_config(dev, 2)) { + printk(KERN_WARNING "%s: Card configuration after flash " + "download failed\n", dev->name); + ret = -1; + } else { + printk(KERN_INFO "%s: Card initialized successfully after " + "flash download\n", dev->name); + } + + out: + local->hw_downloading = 0; + return ret; +} +#endif /* PRISM2_NON_VOLATILE_DOWNLOAD */ + + +static void prism2_download_free_data(struct prism2_download_data *dl) +{ + int i; + + if (dl == NULL) + return; + + for (i = 0; i < dl->num_areas; i++) + kfree(dl->data[i].data); + kfree(dl); +} + + +static int prism2_download(local_info_t *local, + struct prism2_download_param *param) +{ + int ret = 0; + int i; + u32 total_len = 0; + struct prism2_download_data *dl = NULL; + + printk(KERN_DEBUG "prism2_download: dl_cmd=%d start_addr=0x%08x " + "num_areas=%d\n", + param->dl_cmd, param->start_addr, param->num_areas); + + if (param->num_areas > 100) { + ret = -EINVAL; + goto out; + } + + dl = kzalloc(sizeof(*dl) + param->num_areas * + sizeof(struct prism2_download_data_area), GFP_KERNEL); + if (dl == NULL) { + ret = -ENOMEM; + goto out; + } + dl->dl_cmd = param->dl_cmd; + dl->start_addr = param->start_addr; + dl->num_areas = param->num_areas; + for (i = 0; i < param->num_areas; i++) { + PDEBUG(DEBUG_EXTRA2, + " area %d: addr=0x%08x len=%d ptr=0x%p\n", + i, param->data[i].addr, param->data[i].len, + param->data[i].ptr); + + dl->data[i].addr = param->data[i].addr; + dl->data[i].len = param->data[i].len; + + total_len += param->data[i].len; + if (param->data[i].len > PRISM2_MAX_DOWNLOAD_AREA_LEN || + total_len > PRISM2_MAX_DOWNLOAD_LEN) { + ret = -E2BIG; + goto out; + } + + dl->data[i].data = kmalloc(dl->data[i].len, GFP_KERNEL); + if (dl->data[i].data == NULL) { + ret = -ENOMEM; + goto out; + } + + if (copy_from_user(dl->data[i].data, param->data[i].ptr, + param->data[i].len)) { + ret = -EFAULT; + goto out; + } + } + + switch (param->dl_cmd) { + case PRISM2_DOWNLOAD_VOLATILE: + case PRISM2_DOWNLOAD_VOLATILE_PERSISTENT: + ret = prism2_download_volatile(local, dl); + break; + case PRISM2_DOWNLOAD_VOLATILE_GENESIS: + case PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT: + ret = prism2_download_genesis(local, dl); + break; + case PRISM2_DOWNLOAD_NON_VOLATILE: +#ifdef PRISM2_NON_VOLATILE_DOWNLOAD + ret = prism2_download_nonvolatile(local, dl); +#else /* PRISM2_NON_VOLATILE_DOWNLOAD */ + printk(KERN_INFO "%s: non-volatile downloading not enabled\n", + local->dev->name); + ret = -EOPNOTSUPP; +#endif /* PRISM2_NON_VOLATILE_DOWNLOAD */ + break; + default: + printk(KERN_DEBUG "%s: unsupported download command %d\n", + local->dev->name, param->dl_cmd); + ret = -EINVAL; + break; + } + + out: + if (ret == 0 && dl && + param->dl_cmd == PRISM2_DOWNLOAD_VOLATILE_GENESIS_PERSISTENT) { + prism2_download_free_data(local->dl_pri); + local->dl_pri = dl; + } else if (ret == 0 && dl && + param->dl_cmd == PRISM2_DOWNLOAD_VOLATILE_PERSISTENT) { + prism2_download_free_data(local->dl_sec); + local->dl_sec = dl; + } else + prism2_download_free_data(dl); + + return ret; +} diff --git a/drivers/net/wireless/intersil/hostap/hostap_hw.c b/drivers/net/wireless/intersil/hostap/hostap_hw.c new file mode 100644 index 000000000..6df3ee561 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_hw.c @@ -0,0 +1,3424 @@ +/* + * Host AP (software wireless LAN access point) driver for + * Intersil Prism2/2.5/3. + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * <j@w1.fi> + * Copyright (c) 2002-2005, Jouni Malinen <j@w1.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. See README and COPYING for + * more details. + * + * FIX: + * - there is currently no way of associating TX packets to correct wds device + * when TX Exc/OK event occurs, so all tx_packets and some + * tx_errors/tx_dropped are added to the main netdevice; using sw_support + * field in txdesc might be used to fix this (using Alloc event to increment + * tx_packets would need some further info in txfid table) + * + * Buffer Access Path (BAP) usage: + * Prism2 cards have two separate BAPs for accessing the card memory. These + * should allow concurrent access to two different frames and the driver + * previously used BAP0 for sending data and BAP1 for receiving data. + * However, there seems to be number of issues with concurrent access and at + * least one know hardware bug in using BAP0 and BAP1 concurrently with PCI + * Prism2.5. Therefore, the driver now only uses BAP0 for moving data between + * host and card memories. BAP0 accesses are protected with local->baplock + * (spin_lock_bh) to prevent concurrent use. + */ + + + +#include <asm/delay.h> +#include <asm/uaccess.h> + +#include <linux/slab.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/if_arp.h> +#include <linux/delay.h> +#include <linux/random.h> +#include <linux/wait.h> +#include <linux/sched.h> +#include <linux/rtnetlink.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> +#include <net/lib80211.h> +#include <asm/irq.h> + +#include "hostap_80211.h" +#include "hostap.h" +#include "hostap_ap.h" + + +/* #define final_version */ + +static int mtu = 1500; +module_param(mtu, int, 0444); +MODULE_PARM_DESC(mtu, "Maximum transfer unit"); + +static int channel[MAX_PARM_DEVICES] = { 3, DEF_INTS }; +module_param_array(channel, int, NULL, 0444); +MODULE_PARM_DESC(channel, "Initial channel"); + +static char essid[33] = "test"; +module_param_string(essid, essid, sizeof(essid), 0444); +MODULE_PARM_DESC(essid, "Host AP's ESSID"); + +static int iw_mode[MAX_PARM_DEVICES] = { IW_MODE_MASTER, DEF_INTS }; +module_param_array(iw_mode, int, NULL, 0444); +MODULE_PARM_DESC(iw_mode, "Initial operation mode"); + +static int beacon_int[MAX_PARM_DEVICES] = { 100, DEF_INTS }; +module_param_array(beacon_int, int, NULL, 0444); +MODULE_PARM_DESC(beacon_int, "Beacon interval (1 = 1024 usec)"); + +static int dtim_period[MAX_PARM_DEVICES] = { 1, DEF_INTS }; +module_param_array(dtim_period, int, NULL, 0444); +MODULE_PARM_DESC(dtim_period, "DTIM period"); + +static char dev_template[16] = "wlan%d"; +module_param_string(dev_template, dev_template, sizeof(dev_template), 0444); +MODULE_PARM_DESC(dev_template, "Prefix for network device name (default: " + "wlan%d)"); + +#ifdef final_version +#define EXTRA_EVENTS_WTERR 0 +#else +/* check WTERR events (Wait Time-out) in development versions */ +#define EXTRA_EVENTS_WTERR HFA384X_EV_WTERR +#endif + +/* Events that will be using BAP0 */ +#define HFA384X_BAP0_EVENTS \ + (HFA384X_EV_TXEXC | HFA384X_EV_RX | HFA384X_EV_INFO | HFA384X_EV_TX) + +/* event mask, i.e., events that will result in an interrupt */ +#define HFA384X_EVENT_MASK \ + (HFA384X_BAP0_EVENTS | HFA384X_EV_ALLOC | HFA384X_EV_INFDROP | \ + HFA384X_EV_CMD | HFA384X_EV_TICK | \ + EXTRA_EVENTS_WTERR) + +/* Default TX control flags: use 802.11 headers and request interrupt for + * failed transmits. Frames that request ACK callback, will add + * _TX_OK flag and _ALT_RTRY flag may be used to select different retry policy. + */ +#define HFA384X_TX_CTRL_FLAGS \ + (HFA384X_TX_CTRL_802_11 | HFA384X_TX_CTRL_TX_EX) + + +/* ca. 1 usec */ +#define HFA384X_CMD_BUSY_TIMEOUT 5000 +#define HFA384X_BAP_BUSY_TIMEOUT 50000 + +/* ca. 10 usec */ +#define HFA384X_CMD_COMPL_TIMEOUT 20000 +#define HFA384X_DL_COMPL_TIMEOUT 1000000 + +/* Wait times for initialization; yield to other processes to avoid busy + * waiting for long time. */ +#define HFA384X_INIT_TIMEOUT (HZ / 2) /* 500 ms */ +#define HFA384X_ALLOC_COMPL_TIMEOUT (HZ / 20) /* 50 ms */ + + +static void prism2_hw_reset(struct net_device *dev); +static void prism2_check_sta_fw_version(local_info_t *local); + +#ifdef PRISM2_DOWNLOAD_SUPPORT +/* hostap_download.c */ +static const struct file_operations prism2_download_aux_dump_proc_fops; +static u8 * prism2_read_pda(struct net_device *dev); +static int prism2_download(local_info_t *local, + struct prism2_download_param *param); +static void prism2_download_free_data(struct prism2_download_data *dl); +static int prism2_download_volatile(local_info_t *local, + struct prism2_download_data *param); +static int prism2_download_genesis(local_info_t *local, + struct prism2_download_data *param); +static int prism2_get_ram_size(local_info_t *local); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + + + +#ifndef final_version +/* magic value written to SWSUPPORT0 reg. for detecting whether card is still + * present */ +#define HFA384X_MAGIC 0x8A32 +#endif + + +static u16 hfa384x_read_reg(struct net_device *dev, u16 reg) +{ + return HFA384X_INW(reg); +} + + +static void hfa384x_read_regs(struct net_device *dev, + struct hfa384x_regs *regs) +{ + regs->cmd = HFA384X_INW(HFA384X_CMD_OFF); + regs->evstat = HFA384X_INW(HFA384X_EVSTAT_OFF); + regs->offset0 = HFA384X_INW(HFA384X_OFFSET0_OFF); + regs->offset1 = HFA384X_INW(HFA384X_OFFSET1_OFF); + regs->swsupport0 = HFA384X_INW(HFA384X_SWSUPPORT0_OFF); +} + + +/** + * __hostap_cmd_queue_free - Free Prism2 command queue entry (private) + * @local: pointer to private Host AP driver data + * @entry: Prism2 command queue entry to be freed + * @del_req: request the entry to be removed + * + * Internal helper function for freeing Prism2 command queue entries. + * Caller must have acquired local->cmdlock before calling this function. + */ +static inline void __hostap_cmd_queue_free(local_info_t *local, + struct hostap_cmd_queue *entry, + int del_req) +{ + if (del_req) { + entry->del_req = 1; + if (!list_empty(&entry->list)) { + list_del_init(&entry->list); + local->cmd_queue_len--; + } + } + + if (atomic_dec_and_test(&entry->usecnt) && entry->del_req) + kfree(entry); +} + + +/** + * hostap_cmd_queue_free - Free Prism2 command queue entry + * @local: pointer to private Host AP driver data + * @entry: Prism2 command queue entry to be freed + * @del_req: request the entry to be removed + * + * Free a Prism2 command queue entry. + */ +static inline void hostap_cmd_queue_free(local_info_t *local, + struct hostap_cmd_queue *entry, + int del_req) +{ + unsigned long flags; + + spin_lock_irqsave(&local->cmdlock, flags); + __hostap_cmd_queue_free(local, entry, del_req); + spin_unlock_irqrestore(&local->cmdlock, flags); +} + + +/** + * prism2_clear_cmd_queue - Free all pending Prism2 command queue entries + * @local: pointer to private Host AP driver data + */ +static void prism2_clear_cmd_queue(local_info_t *local) +{ + struct list_head *ptr, *n; + unsigned long flags; + struct hostap_cmd_queue *entry; + + spin_lock_irqsave(&local->cmdlock, flags); + list_for_each_safe(ptr, n, &local->cmd_queue) { + entry = list_entry(ptr, struct hostap_cmd_queue, list); + atomic_inc(&entry->usecnt); + printk(KERN_DEBUG "%s: removed pending cmd_queue entry " + "(type=%d, cmd=0x%04x, param0=0x%04x)\n", + local->dev->name, entry->type, entry->cmd, + entry->param0); + __hostap_cmd_queue_free(local, entry, 1); + } + if (local->cmd_queue_len) { + /* This should not happen; print debug message and clear + * queue length. */ + printk(KERN_DEBUG "%s: cmd_queue_len (%d) not zero after " + "flush\n", local->dev->name, local->cmd_queue_len); + local->cmd_queue_len = 0; + } + spin_unlock_irqrestore(&local->cmdlock, flags); +} + + +/** + * hfa384x_cmd_issue - Issue a Prism2 command to the hardware + * @dev: pointer to net_device + * @entry: Prism2 command queue entry to be issued + */ +static int hfa384x_cmd_issue(struct net_device *dev, + struct hostap_cmd_queue *entry) +{ + struct hostap_interface *iface; + local_info_t *local; + int tries; + u16 reg; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->card_present && !local->func->card_present(local)) + return -ENODEV; + + if (entry->issued) { + printk(KERN_DEBUG "%s: driver bug - re-issuing command @%p\n", + dev->name, entry); + } + + /* wait until busy bit is clear; this should always be clear since the + * commands are serialized */ + tries = HFA384X_CMD_BUSY_TIMEOUT; + while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) { + tries--; + udelay(1); + } +#ifndef final_version + if (tries != HFA384X_CMD_BUSY_TIMEOUT) { + prism2_io_debug_error(dev, 1); + printk(KERN_DEBUG "%s: hfa384x_cmd_issue: cmd reg was busy " + "for %d usec\n", dev->name, + HFA384X_CMD_BUSY_TIMEOUT - tries); + } +#endif + if (tries == 0) { + reg = HFA384X_INW(HFA384X_CMD_OFF); + prism2_io_debug_error(dev, 2); + printk(KERN_DEBUG "%s: hfa384x_cmd_issue - timeout - " + "reg=0x%04x\n", dev->name, reg); + return -ETIMEDOUT; + } + + /* write command */ + spin_lock_irqsave(&local->cmdlock, flags); + HFA384X_OUTW(entry->param0, HFA384X_PARAM0_OFF); + HFA384X_OUTW(entry->param1, HFA384X_PARAM1_OFF); + HFA384X_OUTW(entry->cmd, HFA384X_CMD_OFF); + entry->issued = 1; + spin_unlock_irqrestore(&local->cmdlock, flags); + + return 0; +} + + +/** + * hfa384x_cmd - Issue a Prism2 command and wait (sleep) for completion + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + * @param1: value for Param1 register (pointer; %NULL if not used) + * @resp0: pointer for Resp0 data or %NULL if Resp0 is not needed + * + * Issue given command (possibly after waiting in command queue) and sleep + * until the command is completed (or timed out or interrupted). This can be + * called only from user process context. + */ +static int hfa384x_cmd(struct net_device *dev, u16 cmd, u16 param0, + u16 *param1, u16 *resp0) +{ + struct hostap_interface *iface; + local_info_t *local; + int err, res, issue, issued = 0; + unsigned long flags; + struct hostap_cmd_queue *entry; + DECLARE_WAITQUEUE(wait, current); + + iface = netdev_priv(dev); + local = iface->local; + + if (in_interrupt()) { + printk(KERN_DEBUG "%s: hfa384x_cmd called from interrupt " + "context\n", dev->name); + return -1; + } + + if (local->cmd_queue_len >= HOSTAP_CMD_QUEUE_MAX_LEN) { + printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", + dev->name); + return -1; + } + + if (signal_pending(current)) + return -EINTR; + + entry = kzalloc(sizeof(*entry), GFP_ATOMIC); + if (entry == NULL) + return -ENOMEM; + + atomic_set(&entry->usecnt, 1); + entry->type = CMD_SLEEP; + entry->cmd = cmd; + entry->param0 = param0; + if (param1) + entry->param1 = *param1; + init_waitqueue_head(&entry->compl); + + /* prepare to wait for command completion event, but do not sleep yet + */ + add_wait_queue(&entry->compl, &wait); + set_current_state(TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&local->cmdlock, flags); + issue = list_empty(&local->cmd_queue); + if (issue) + entry->issuing = 1; + list_add_tail(&entry->list, &local->cmd_queue); + local->cmd_queue_len++; + spin_unlock_irqrestore(&local->cmdlock, flags); + + err = 0; + if (!issue) + goto wait_completion; + + if (signal_pending(current)) + err = -EINTR; + + if (!err) { + if (hfa384x_cmd_issue(dev, entry)) + err = -ETIMEDOUT; + else + issued = 1; + } + + wait_completion: + if (!err && entry->type != CMD_COMPLETED) { + /* sleep until command is completed or timed out */ + res = schedule_timeout(2 * HZ); + } else + res = -1; + + if (!err && signal_pending(current)) + err = -EINTR; + + if (err && issued) { + /* the command was issued, so a CmdCompl event should occur + * soon; however, there's a pending signal and + * schedule_timeout() would be interrupted; wait a short period + * of time to avoid removing entry from the list before + * CmdCompl event */ + udelay(300); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&entry->compl, &wait); + + /* If entry->list is still in the list, it must be removed + * first and in this case prism2_cmd_ev() does not yet have + * local reference to it, and the data can be kfree()'d + * here. If the command completion event is still generated, + * it will be assigned to next (possibly) pending command, but + * the driver will reset the card anyway due to timeout + * + * If the entry is not in the list prism2_cmd_ev() has a local + * reference to it, but keeps cmdlock as long as the data is + * needed, so the data can be kfree()'d here. */ + + /* FIX: if the entry->list is in the list, it has not been completed + * yet, so removing it here is somewhat wrong.. this could cause + * references to freed memory and next list_del() causing NULL pointer + * dereference.. it would probably be better to leave the entry in the + * list and the list should be emptied during hw reset */ + + spin_lock_irqsave(&local->cmdlock, flags); + if (!list_empty(&entry->list)) { + printk(KERN_DEBUG "%s: hfa384x_cmd: entry still in list? " + "(entry=%p, type=%d, res=%d)\n", dev->name, entry, + entry->type, res); + list_del_init(&entry->list); + local->cmd_queue_len--; + } + spin_unlock_irqrestore(&local->cmdlock, flags); + + if (err) { + printk(KERN_DEBUG "%s: hfa384x_cmd: interrupted; err=%d\n", + dev->name, err); + res = err; + goto done; + } + + if (entry->type != CMD_COMPLETED) { + u16 reg = HFA384X_INW(HFA384X_EVSTAT_OFF); + printk(KERN_DEBUG "%s: hfa384x_cmd: command was not " + "completed (res=%d, entry=%p, type=%d, cmd=0x%04x, " + "param0=0x%04x, EVSTAT=%04x INTEN=%04x)\n", dev->name, + res, entry, entry->type, entry->cmd, entry->param0, reg, + HFA384X_INW(HFA384X_INTEN_OFF)); + if (reg & HFA384X_EV_CMD) { + /* Command completion event is pending, but the + * interrupt was not delivered - probably an issue + * with pcmcia-cs configuration. */ + printk(KERN_WARNING "%s: interrupt delivery does not " + "seem to work\n", dev->name); + } + prism2_io_debug_error(dev, 3); + res = -ETIMEDOUT; + goto done; + } + + if (resp0 != NULL) + *resp0 = entry->resp0; +#ifndef final_version + if (entry->res) { + printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x, " + "resp0=0x%04x\n", + dev->name, cmd, entry->res, entry->resp0); + } +#endif /* final_version */ + + res = entry->res; + done: + hostap_cmd_queue_free(local, entry, 1); + return res; +} + + +/** + * hfa384x_cmd_callback - Issue a Prism2 command; callback when completed + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + * @callback: command completion callback function (%NULL = no callback) + * @context: context data to be given to the callback function + * + * Issue given command (possibly after waiting in command queue) and use + * callback function to indicate command completion. This can be called both + * from user and interrupt context. The callback function will be called in + * hardware IRQ context. It can be %NULL, when no function is called when + * command is completed. + */ +static int hfa384x_cmd_callback(struct net_device *dev, u16 cmd, u16 param0, + void (*callback)(struct net_device *dev, + long context, u16 resp0, + u16 status), + long context) +{ + struct hostap_interface *iface; + local_info_t *local; + int issue, ret; + unsigned long flags; + struct hostap_cmd_queue *entry; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->cmd_queue_len >= HOSTAP_CMD_QUEUE_MAX_LEN + 2) { + printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", + dev->name); + return -1; + } + + entry = kzalloc(sizeof(*entry), GFP_ATOMIC); + if (entry == NULL) + return -ENOMEM; + + atomic_set(&entry->usecnt, 1); + entry->type = CMD_CALLBACK; + entry->cmd = cmd; + entry->param0 = param0; + entry->callback = callback; + entry->context = context; + + spin_lock_irqsave(&local->cmdlock, flags); + issue = list_empty(&local->cmd_queue); + if (issue) + entry->issuing = 1; + list_add_tail(&entry->list, &local->cmd_queue); + local->cmd_queue_len++; + spin_unlock_irqrestore(&local->cmdlock, flags); + + if (issue && hfa384x_cmd_issue(dev, entry)) + ret = -ETIMEDOUT; + else + ret = 0; + + hostap_cmd_queue_free(local, entry, ret); + + return ret; +} + + +/** + * __hfa384x_cmd_no_wait - Issue a Prism2 command (private) + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + * @io_debug_num: I/O debug error number + * + * Shared helper function for hfa384x_cmd_wait() and hfa384x_cmd_no_wait(). + */ +static int __hfa384x_cmd_no_wait(struct net_device *dev, u16 cmd, u16 param0, + int io_debug_num) +{ + int tries; + u16 reg; + + /* wait until busy bit is clear; this should always be clear since the + * commands are serialized */ + tries = HFA384X_CMD_BUSY_TIMEOUT; + while (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY && tries > 0) { + tries--; + udelay(1); + } + if (tries == 0) { + reg = HFA384X_INW(HFA384X_CMD_OFF); + prism2_io_debug_error(dev, io_debug_num); + printk(KERN_DEBUG "%s: __hfa384x_cmd_no_wait(%d) - timeout - " + "reg=0x%04x\n", dev->name, io_debug_num, reg); + return -ETIMEDOUT; + } + + /* write command */ + HFA384X_OUTW(param0, HFA384X_PARAM0_OFF); + HFA384X_OUTW(cmd, HFA384X_CMD_OFF); + + return 0; +} + + +/** + * hfa384x_cmd_wait - Issue a Prism2 command and busy wait for completion + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + */ +static int hfa384x_cmd_wait(struct net_device *dev, u16 cmd, u16 param0) +{ + int res, tries; + u16 reg; + + res = __hfa384x_cmd_no_wait(dev, cmd, param0, 4); + if (res) + return res; + + /* wait for command completion */ + if ((cmd & HFA384X_CMDCODE_MASK) == HFA384X_CMDCODE_DOWNLOAD) + tries = HFA384X_DL_COMPL_TIMEOUT; + else + tries = HFA384X_CMD_COMPL_TIMEOUT; + + while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD) && + tries > 0) { + tries--; + udelay(10); + } + if (tries == 0) { + reg = HFA384X_INW(HFA384X_EVSTAT_OFF); + prism2_io_debug_error(dev, 5); + printk(KERN_DEBUG "%s: hfa384x_cmd_wait - timeout2 - " + "reg=0x%04x\n", dev->name, reg); + return -ETIMEDOUT; + } + + res = (HFA384X_INW(HFA384X_STATUS_OFF) & + (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) | BIT(9) | + BIT(8))) >> 8; +#ifndef final_version + if (res) { + printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x\n", + dev->name, cmd, res); + } +#endif + + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + + return res; +} + + +/** + * hfa384x_cmd_no_wait - Issue a Prism2 command; do not wait for completion + * @dev: pointer to net_device + * @cmd: Prism2 command code (HFA384X_CMD_CODE_*) + * @param0: value for Param0 register + */ +static inline int hfa384x_cmd_no_wait(struct net_device *dev, u16 cmd, + u16 param0) +{ + return __hfa384x_cmd_no_wait(dev, cmd, param0, 6); +} + + +/** + * prism2_cmd_ev - Prism2 command completion event handler + * @dev: pointer to net_device + * + * Interrupt handler for command completion events. Called by the main + * interrupt handler in hardware IRQ context. Read Resp0 and status registers + * from the hardware and ACK the event. Depending on the issued command type + * either wake up the sleeping process that is waiting for command completion + * or call the callback function. Issue the next command, if one is pending. + */ +static void prism2_cmd_ev(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hostap_cmd_queue *entry = NULL; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock(&local->cmdlock); + if (!list_empty(&local->cmd_queue)) { + entry = list_entry(local->cmd_queue.next, + struct hostap_cmd_queue, list); + atomic_inc(&entry->usecnt); + list_del_init(&entry->list); + local->cmd_queue_len--; + + if (!entry->issued) { + printk(KERN_DEBUG "%s: Command completion event, but " + "cmd not issued\n", dev->name); + __hostap_cmd_queue_free(local, entry, 1); + entry = NULL; + } + } + spin_unlock(&local->cmdlock); + + if (!entry) { + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + printk(KERN_DEBUG "%s: Command completion event, but no " + "pending commands\n", dev->name); + return; + } + + entry->resp0 = HFA384X_INW(HFA384X_RESP0_OFF); + entry->res = (HFA384X_INW(HFA384X_STATUS_OFF) & + (BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10) | + BIT(9) | BIT(8))) >> 8; + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + + /* TODO: rest of the CmdEv handling could be moved to tasklet */ + if (entry->type == CMD_SLEEP) { + entry->type = CMD_COMPLETED; + wake_up_interruptible(&entry->compl); + } else if (entry->type == CMD_CALLBACK) { + if (entry->callback) + entry->callback(dev, entry->context, entry->resp0, + entry->res); + } else { + printk(KERN_DEBUG "%s: Invalid command completion type %d\n", + dev->name, entry->type); + } + hostap_cmd_queue_free(local, entry, 1); + + /* issue next command, if pending */ + entry = NULL; + spin_lock(&local->cmdlock); + if (!list_empty(&local->cmd_queue)) { + entry = list_entry(local->cmd_queue.next, + struct hostap_cmd_queue, list); + if (entry->issuing) { + /* hfa384x_cmd() has already started issuing this + * command, so do not start here */ + entry = NULL; + } + if (entry) + atomic_inc(&entry->usecnt); + } + spin_unlock(&local->cmdlock); + + if (entry) { + /* issue next command; if command issuing fails, remove the + * entry from cmd_queue */ + int res = hfa384x_cmd_issue(dev, entry); + spin_lock(&local->cmdlock); + __hostap_cmd_queue_free(local, entry, res); + spin_unlock(&local->cmdlock); + } +} + + +static int hfa384x_wait_offset(struct net_device *dev, u16 o_off) +{ + int tries = HFA384X_BAP_BUSY_TIMEOUT; + int res = HFA384X_INW(o_off) & HFA384X_OFFSET_BUSY; + + while (res && tries > 0) { + tries--; + udelay(1); + res = HFA384X_INW(o_off) & HFA384X_OFFSET_BUSY; + } + return res; +} + + +/* Offset must be even */ +static int hfa384x_setup_bap(struct net_device *dev, u16 bap, u16 id, + int offset) +{ + u16 o_off, s_off; + int ret = 0; + + if (offset % 2 || bap > 1) + return -EINVAL; + + if (bap == BAP1) { + o_off = HFA384X_OFFSET1_OFF; + s_off = HFA384X_SELECT1_OFF; + } else { + o_off = HFA384X_OFFSET0_OFF; + s_off = HFA384X_SELECT0_OFF; + } + + if (hfa384x_wait_offset(dev, o_off)) { + prism2_io_debug_error(dev, 7); + printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout before\n", + dev->name); + ret = -ETIMEDOUT; + goto out; + } + + HFA384X_OUTW(id, s_off); + HFA384X_OUTW(offset, o_off); + + if (hfa384x_wait_offset(dev, o_off)) { + prism2_io_debug_error(dev, 8); + printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout after\n", + dev->name); + ret = -ETIMEDOUT; + goto out; + } +#ifndef final_version + if (HFA384X_INW(o_off) & HFA384X_OFFSET_ERR) { + prism2_io_debug_error(dev, 9); + printk(KERN_DEBUG "%s: hfa384x_setup_bap - offset error " + "(%d,0x04%x,%d); reg=0x%04x\n", + dev->name, bap, id, offset, HFA384X_INW(o_off)); + ret = -EINVAL; + } +#endif + + out: + return ret; +} + + +static int hfa384x_get_rid(struct net_device *dev, u16 rid, void *buf, int len, + int exact_len) +{ + struct hostap_interface *iface; + local_info_t *local; + int res, rlen = 0; + struct hfa384x_rid_hdr rec; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + printk(KERN_DEBUG "%s: cannot get RID %04x (len=%d) - no PRI " + "f/w\n", dev->name, rid, len); + return -ENOTTY; /* Well.. not really correct, but return + * something unique enough.. */ + } + + if ((local->func->card_present && !local->func->card_present(local)) || + local->hw_downloading) + return -ENODEV; + + res = mutex_lock_interruptible(&local->rid_bap_mtx); + if (res) + return res; + + res = hfa384x_cmd(dev, HFA384X_CMDCODE_ACCESS, rid, NULL, NULL); + if (res) { + printk(KERN_DEBUG "%s: hfa384x_get_rid: CMDCODE_ACCESS failed " + "(res=%d, rid=%04x, len=%d)\n", + dev->name, res, rid, len); + mutex_unlock(&local->rid_bap_mtx); + return res; + } + + spin_lock_bh(&local->baplock); + + res = hfa384x_setup_bap(dev, BAP0, rid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, &rec, sizeof(rec)); + + if (le16_to_cpu(rec.len) == 0) { + /* RID not available */ + res = -ENODATA; + } + + rlen = (le16_to_cpu(rec.len) - 1) * 2; + if (!res && exact_len && rlen != len) { + printk(KERN_DEBUG "%s: hfa384x_get_rid - RID len mismatch: " + "rid=0x%04x, len=%d (expected %d)\n", + dev->name, rid, rlen, len); + res = -ENODATA; + } + + if (!res) + res = hfa384x_from_bap(dev, BAP0, buf, len); + + spin_unlock_bh(&local->baplock); + mutex_unlock(&local->rid_bap_mtx); + + if (res) { + if (res != -ENODATA) + printk(KERN_DEBUG "%s: hfa384x_get_rid (rid=%04x, " + "len=%d) - failed - res=%d\n", dev->name, rid, + len, res); + if (res == -ETIMEDOUT) + prism2_hw_reset(dev); + return res; + } + + return rlen; +} + + +static int hfa384x_set_rid(struct net_device *dev, u16 rid, void *buf, int len) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_rid_hdr rec; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + printk(KERN_DEBUG "%s: cannot set RID %04x (len=%d) - no PRI " + "f/w\n", dev->name, rid, len); + return -ENOTTY; /* Well.. not really correct, but return + * something unique enough.. */ + } + + if ((local->func->card_present && !local->func->card_present(local)) || + local->hw_downloading) + return -ENODEV; + + rec.rid = cpu_to_le16(rid); + /* RID len in words and +1 for rec.rid */ + rec.len = cpu_to_le16(len / 2 + len % 2 + 1); + + res = mutex_lock_interruptible(&local->rid_bap_mtx); + if (res) + return res; + + spin_lock_bh(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, rid, 0); + if (!res) + res = hfa384x_to_bap(dev, BAP0, &rec, sizeof(rec)); + if (!res) + res = hfa384x_to_bap(dev, BAP0, buf, len); + spin_unlock_bh(&local->baplock); + + if (res) { + printk(KERN_DEBUG "%s: hfa384x_set_rid (rid=%04x, len=%d) - " + "failed - res=%d\n", dev->name, rid, len, res); + mutex_unlock(&local->rid_bap_mtx); + return res; + } + + res = hfa384x_cmd(dev, HFA384X_CMDCODE_ACCESS_WRITE, rid, NULL, NULL); + mutex_unlock(&local->rid_bap_mtx); + + if (res) { + printk(KERN_DEBUG "%s: hfa384x_set_rid: CMDCODE_ACCESS_WRITE " + "failed (res=%d, rid=%04x, len=%d)\n", + dev->name, res, rid, len); + + if (res == -ETIMEDOUT) + prism2_hw_reset(dev); + } + + return res; +} + + +static void hfa384x_disable_interrupts(struct net_device *dev) +{ + /* disable interrupts and clear event status */ + HFA384X_OUTW(0, HFA384X_INTEN_OFF); + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); +} + + +static void hfa384x_enable_interrupts(struct net_device *dev) +{ + /* ack pending events and enable interrupts from selected events */ + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); + HFA384X_OUTW(HFA384X_EVENT_MASK, HFA384X_INTEN_OFF); +} + + +static void hfa384x_events_no_bap0(struct net_device *dev) +{ + HFA384X_OUTW(HFA384X_EVENT_MASK & ~HFA384X_BAP0_EVENTS, + HFA384X_INTEN_OFF); +} + + +static void hfa384x_events_all(struct net_device *dev) +{ + HFA384X_OUTW(HFA384X_EVENT_MASK, HFA384X_INTEN_OFF); +} + + +static void hfa384x_events_only_cmd(struct net_device *dev) +{ + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_INTEN_OFF); +} + + +static u16 hfa384x_allocate_fid(struct net_device *dev, int len) +{ + u16 fid; + unsigned long delay; + + /* FIX: this could be replace with hfa384x_cmd() if the Alloc event + * below would be handled like CmdCompl event (sleep here, wake up from + * interrupt handler */ + if (hfa384x_cmd_wait(dev, HFA384X_CMDCODE_ALLOC, len)) { + printk(KERN_DEBUG "%s: cannot allocate fid, len=%d\n", + dev->name, len); + return 0xffff; + } + + delay = jiffies + HFA384X_ALLOC_COMPL_TIMEOUT; + while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_ALLOC) && + time_before(jiffies, delay)) + yield(); + if (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_ALLOC)) { + printk("%s: fid allocate, len=%d - timeout\n", dev->name, len); + return 0xffff; + } + + fid = HFA384X_INW(HFA384X_ALLOCFID_OFF); + HFA384X_OUTW(HFA384X_EV_ALLOC, HFA384X_EVACK_OFF); + + return fid; +} + + +static int prism2_reset_port(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + if (!local->dev_enabled) + return 0; + + res = hfa384x_cmd(dev, HFA384X_CMDCODE_DISABLE, 0, + NULL, NULL); + if (res) + printk(KERN_DEBUG "%s: reset port failed to disable port\n", + dev->name); + else { + res = hfa384x_cmd(dev, HFA384X_CMDCODE_ENABLE, 0, + NULL, NULL); + if (res) + printk(KERN_DEBUG "%s: reset port failed to enable " + "port\n", dev->name); + } + + /* It looks like at least some STA firmware versions reset + * fragmentation threshold back to 2346 after enable command. Restore + * the configured value, if it differs from this default. */ + if (local->fragm_threshold != 2346 && + hostap_set_word(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, + local->fragm_threshold)) { + printk(KERN_DEBUG "%s: failed to restore fragmentation " + "threshold (%d) after Port0 enable\n", + dev->name, local->fragm_threshold); + } + + /* Some firmwares lose antenna selection settings on reset */ + (void) hostap_set_antsel(local); + + return res; +} + + +static int prism2_get_version_info(struct net_device *dev, u16 rid, + const char *txt) +{ + struct hfa384x_comp_ident comp; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + /* PRI f/w not yet available - cannot read RIDs */ + return -1; + } + if (hfa384x_get_rid(dev, rid, &comp, sizeof(comp), 1) < 0) { + printk(KERN_DEBUG "Could not get RID for component %s\n", txt); + return -1; + } + + printk(KERN_INFO "%s: %s: id=0x%02x v%d.%d.%d\n", dev->name, txt, + __le16_to_cpu(comp.id), __le16_to_cpu(comp.major), + __le16_to_cpu(comp.minor), __le16_to_cpu(comp.variant)); + return 0; +} + + +static int prism2_setup_rids(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + __le16 tmp; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + hostap_set_word(dev, HFA384X_RID_TICKTIME, 2000); + + if (!local->fw_ap) { + u16 tmp1 = hostap_get_porttype(local); + ret = hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, tmp1); + if (ret) { + printk("%s: Port type setting to %d failed\n", + dev->name, tmp1); + goto fail; + } + } + + /* Setting SSID to empty string seems to kill the card in Host AP mode + */ + if (local->iw_mode != IW_MODE_MASTER || local->essid[0] != '\0') { + ret = hostap_set_string(dev, HFA384X_RID_CNFOWNSSID, + local->essid); + if (ret) { + printk("%s: AP own SSID setting failed\n", dev->name); + goto fail; + } + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFMAXDATALEN, + PRISM2_DATA_MAXLEN); + if (ret) { + printk("%s: MAC data length setting to %d failed\n", + dev->name, PRISM2_DATA_MAXLEN); + goto fail; + } + + if (hfa384x_get_rid(dev, HFA384X_RID_CHANNELLIST, &tmp, 2, 1) < 0) { + printk("%s: Channel list read failed\n", dev->name); + ret = -EINVAL; + goto fail; + } + local->channel_mask = le16_to_cpu(tmp); + + if (local->channel < 1 || local->channel > 14 || + !(local->channel_mask & (1 << (local->channel - 1)))) { + printk(KERN_WARNING "%s: Channel setting out of range " + "(%d)!\n", dev->name, local->channel); + ret = -EBUSY; + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFOWNCHANNEL, local->channel); + if (ret) { + printk("%s: Channel setting to %d failed\n", + dev->name, local->channel); + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFBEACONINT, + local->beacon_int); + if (ret) { + printk("%s: Beacon interval setting to %d failed\n", + dev->name, local->beacon_int); + /* this may fail with Symbol/Lucent firmware */ + if (ret == -ETIMEDOUT) + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFOWNDTIMPERIOD, + local->dtim_period); + if (ret) { + printk("%s: DTIM period setting to %d failed\n", + dev->name, local->dtim_period); + /* this may fail with Symbol/Lucent firmware */ + if (ret == -ETIMEDOUT) + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, + local->is_promisc); + if (ret) + printk(KERN_INFO "%s: Setting promiscuous mode (%d) failed\n", + dev->name, local->is_promisc); + + if (!local->fw_ap) { + ret = hostap_set_string(dev, HFA384X_RID_CNFDESIREDSSID, + local->essid); + if (ret) { + printk("%s: Desired SSID setting failed\n", dev->name); + goto fail; + } + } + + /* Setup TXRateControl, defaults to allow use of 1, 2, 5.5, and + * 11 Mbps in automatic TX rate fallback and 1 and 2 Mbps as basic + * rates */ + if (local->tx_rate_control == 0) { + local->tx_rate_control = + HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS | + HFA384X_RATES_5MBPS | + HFA384X_RATES_11MBPS; + } + if (local->basic_rates == 0) + local->basic_rates = HFA384X_RATES_1MBPS | HFA384X_RATES_2MBPS; + + if (!local->fw_ap) { + ret = hostap_set_word(dev, HFA384X_RID_TXRATECONTROL, + local->tx_rate_control); + if (ret) { + printk("%s: TXRateControl setting to %d failed\n", + dev->name, local->tx_rate_control); + goto fail; + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFSUPPORTEDRATES, + local->tx_rate_control); + if (ret) { + printk("%s: cnfSupportedRates setting to %d failed\n", + dev->name, local->tx_rate_control); + } + + ret = hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, + local->basic_rates); + if (ret) { + printk("%s: cnfBasicRates setting to %d failed\n", + dev->name, local->basic_rates); + } + + ret = hostap_set_word(dev, HFA384X_RID_CREATEIBSS, 1); + if (ret) { + printk("%s: Create IBSS setting to 1 failed\n", + dev->name); + } + } + + if (local->name_set) + (void) hostap_set_string(dev, HFA384X_RID_CNFOWNNAME, + local->name); + + if (hostap_set_encryption(local)) { + printk(KERN_INFO "%s: could not configure encryption\n", + dev->name); + } + + (void) hostap_set_antsel(local); + + if (hostap_set_roaming(local)) { + printk(KERN_INFO "%s: could not set host roaming\n", + dev->name); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,6,3) && + hostap_set_word(dev, HFA384X_RID_CNFENHSECURITY, local->enh_sec)) + printk(KERN_INFO "%s: cnfEnhSecurity setting to 0x%x failed\n", + dev->name, local->enh_sec); + + /* 32-bit tallies were added in STA f/w 0.8.0, but they were apparently + * not working correctly (last seven counters report bogus values). + * This has been fixed in 0.8.2, so enable 32-bit tallies only + * beginning with that firmware version. Another bug fix for 32-bit + * tallies in 1.4.0; should 16-bit tallies be used for some other + * versions, too? */ + if (local->sta_fw_ver >= PRISM2_FW_VER(0,8,2)) { + if (hostap_set_word(dev, HFA384X_RID_CNFTHIRTY2TALLY, 1)) { + printk(KERN_INFO "%s: cnfThirty2Tally setting " + "failed\n", dev->name); + local->tallies32 = 0; + } else + local->tallies32 = 1; + } else + local->tallies32 = 0; + + hostap_set_auth_algs(local); + + if (hostap_set_word(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, + local->fragm_threshold)) { + printk(KERN_INFO "%s: setting FragmentationThreshold to %d " + "failed\n", dev->name, local->fragm_threshold); + } + + if (hostap_set_word(dev, HFA384X_RID_RTSTHRESHOLD, + local->rts_threshold)) { + printk(KERN_INFO "%s: setting RTSThreshold to %d failed\n", + dev->name, local->rts_threshold); + } + + if (local->manual_retry_count >= 0 && + hostap_set_word(dev, HFA384X_RID_CNFALTRETRYCOUNT, + local->manual_retry_count)) { + printk(KERN_INFO "%s: setting cnfAltRetryCount to %d failed\n", + dev->name, local->manual_retry_count); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1) && + hfa384x_get_rid(dev, HFA384X_RID_CNFDBMADJUST, &tmp, 2, 1) == 2) { + local->rssi_to_dBm = le16_to_cpu(tmp); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,7,0) && local->wpa && + hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, 1)) { + printk(KERN_INFO "%s: setting ssnHandlingMode to 1 failed\n", + dev->name); + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,7,0) && local->generic_elem && + hfa384x_set_rid(dev, HFA384X_RID_GENERICELEMENT, + local->generic_elem, local->generic_elem_len)) { + printk(KERN_INFO "%s: setting genericElement failed\n", + dev->name); + } + + fail: + return ret; +} + + +static int prism2_hw_init(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret, first = 1; + unsigned long start, delay; + + PDEBUG(DEBUG_FLOW, "prism2_hw_init()\n"); + + iface = netdev_priv(dev); + local = iface->local; + + clear_bit(HOSTAP_BITS_TRANSMIT, &local->bits); + + init: + /* initialize HFA 384x */ + ret = hfa384x_cmd_no_wait(dev, HFA384X_CMDCODE_INIT, 0); + if (ret) { + printk(KERN_INFO "%s: first command failed - assuming card " + "does not have primary firmware\n", dev_info); + } + + if (first && (HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD)) { + /* EvStat has Cmd bit set in some cases, so retry once if no + * wait was needed */ + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + printk(KERN_DEBUG "%s: init command completed too quickly - " + "retrying\n", dev->name); + first = 0; + goto init; + } + + start = jiffies; + delay = jiffies + HFA384X_INIT_TIMEOUT; + while (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD) && + time_before(jiffies, delay)) + yield(); + if (!(HFA384X_INW(HFA384X_EVSTAT_OFF) & HFA384X_EV_CMD)) { + printk(KERN_DEBUG "%s: assuming no Primary image in " + "flash - card initialization not completed\n", + dev_info); + local->no_pri = 1; +#ifdef PRISM2_DOWNLOAD_SUPPORT + if (local->sram_type == -1) + local->sram_type = prism2_get_ram_size(local); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + return 1; + } + local->no_pri = 0; + printk(KERN_DEBUG "prism2_hw_init: initialized in %lu ms\n", + (jiffies - start) * 1000 / HZ); + HFA384X_OUTW(HFA384X_EV_CMD, HFA384X_EVACK_OFF); + return 0; +} + + +static int prism2_hw_init2(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + int i; + + iface = netdev_priv(dev); + local = iface->local; + +#ifdef PRISM2_DOWNLOAD_SUPPORT + kfree(local->pda); + if (local->no_pri) + local->pda = NULL; + else + local->pda = prism2_read_pda(dev); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + hfa384x_disable_interrupts(dev); + +#ifndef final_version + HFA384X_OUTW(HFA384X_MAGIC, HFA384X_SWSUPPORT0_OFF); + if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != HFA384X_MAGIC) { + printk("SWSUPPORT0 write/read failed: %04X != %04X\n", + HFA384X_INW(HFA384X_SWSUPPORT0_OFF), HFA384X_MAGIC); + goto failed; + } +#endif + + if (initial || local->pri_only) { + hfa384x_events_only_cmd(dev); + /* get card version information */ + if (prism2_get_version_info(dev, HFA384X_RID_NICID, "NIC") || + prism2_get_version_info(dev, HFA384X_RID_PRIID, "PRI")) { + hfa384x_disable_interrupts(dev); + goto failed; + } + + if (prism2_get_version_info(dev, HFA384X_RID_STAID, "STA")) { + printk(KERN_DEBUG "%s: Failed to read STA f/w version " + "- only Primary f/w present\n", dev->name); + local->pri_only = 1; + return 0; + } + local->pri_only = 0; + hfa384x_disable_interrupts(dev); + } + + /* FIX: could convert allocate_fid to use sleeping CmdCompl wait and + * enable interrupts before this. This would also require some sort of + * sleeping AllocEv waiting */ + + /* allocate TX FIDs */ + local->txfid_len = PRISM2_TXFID_LEN; + for (i = 0; i < PRISM2_TXFID_COUNT; i++) { + local->txfid[i] = hfa384x_allocate_fid(dev, local->txfid_len); + if (local->txfid[i] == 0xffff && local->txfid_len > 1600) { + local->txfid[i] = hfa384x_allocate_fid(dev, 1600); + if (local->txfid[i] != 0xffff) { + printk(KERN_DEBUG "%s: Using shorter TX FID " + "(1600 bytes)\n", dev->name); + local->txfid_len = 1600; + } + } + if (local->txfid[i] == 0xffff) + goto failed; + local->intransmitfid[i] = PRISM2_TXFID_EMPTY; + } + + hfa384x_events_only_cmd(dev); + + if (initial) { + struct list_head *ptr; + prism2_check_sta_fw_version(local); + + if (hfa384x_get_rid(dev, HFA384X_RID_CNFOWNMACADDR, + dev->dev_addr, 6, 1) < 0) { + printk("%s: could not get own MAC address\n", + dev->name); + } + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + eth_hw_addr_inherit(iface->dev, dev); + } + } else if (local->fw_ap) + prism2_check_sta_fw_version(local); + + prism2_setup_rids(dev); + + /* MAC is now configured, but port 0 is not yet enabled */ + return 0; + + failed: + if (!local->no_pri) + printk(KERN_WARNING "%s: Initialization failed\n", dev_info); + return 1; +} + + +static int prism2_hw_enable(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + int was_resetting; + + iface = netdev_priv(dev); + local = iface->local; + was_resetting = local->hw_resetting; + + if (hfa384x_cmd(dev, HFA384X_CMDCODE_ENABLE, 0, NULL, NULL)) { + printk("%s: MAC port 0 enabling failed\n", dev->name); + return 1; + } + + local->hw_ready = 1; + local->hw_reset_tries = 0; + local->hw_resetting = 0; + hfa384x_enable_interrupts(dev); + + /* at least D-Link DWL-650 seems to require additional port reset + * before it starts acting as an AP, so reset port automatically + * here just in case */ + if (initial && prism2_reset_port(dev)) { + printk("%s: MAC port 0 resetting failed\n", dev->name); + return 1; + } + + if (was_resetting && netif_queue_stopped(dev)) { + /* If hw_reset() was called during pending transmit, netif + * queue was stopped. Wake it up now since the wlan card has + * been resetted. */ + netif_wake_queue(dev); + } + + return 0; +} + + +static int prism2_hw_config(struct net_device *dev, int initial) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->hw_downloading) + return 1; + + if (prism2_hw_init(dev, initial)) { + return local->no_pri ? 0 : 1; + } + + if (prism2_hw_init2(dev, initial)) + return 1; + + /* Enable firmware if secondary image is loaded and at least one of the + * netdevices is up. */ + if (!local->pri_only && + (initial == 0 || (initial == 2 && local->num_dev_open > 0))) { + if (!local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_ENABLE); + local->dev_enabled = 1; + return prism2_hw_enable(dev, initial); + } + + return 0; +} + + +static void prism2_hw_shutdown(struct net_device *dev, int no_disable) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + /* Allow only command completion events during disable */ + hfa384x_events_only_cmd(dev); + + local->hw_ready = 0; + if (local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_DISABLE); + local->dev_enabled = 0; + + if (local->func->card_present && !local->func->card_present(local)) { + printk(KERN_DEBUG "%s: card already removed or not configured " + "during shutdown\n", dev->name); + return; + } + + if ((no_disable & HOSTAP_HW_NO_DISABLE) == 0 && + hfa384x_cmd(dev, HFA384X_CMDCODE_DISABLE, 0, NULL, NULL)) + printk(KERN_WARNING "%s: Shutdown failed\n", dev_info); + + hfa384x_disable_interrupts(dev); + + if (no_disable & HOSTAP_HW_ENABLE_CMDCOMPL) + hfa384x_events_only_cmd(dev); + else + prism2_clear_cmd_queue(local); +} + + +static void prism2_hw_reset(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + +#if 0 + static long last_reset = 0; + + /* do not reset card more than once per second to avoid ending up in a + * busy loop resetting the card */ + if (time_before_eq(jiffies, last_reset + HZ)) + return; + last_reset = jiffies; +#endif + + iface = netdev_priv(dev); + local = iface->local; + + if (in_interrupt()) { + printk(KERN_DEBUG "%s: driver bug - prism2_hw_reset() called " + "in interrupt context\n", dev->name); + return; + } + + if (local->hw_downloading) + return; + + if (local->hw_resetting) { + printk(KERN_WARNING "%s: %s: already resetting card - " + "ignoring reset request\n", dev_info, dev->name); + return; + } + + local->hw_reset_tries++; + if (local->hw_reset_tries > 10) { + printk(KERN_WARNING "%s: too many reset tries, skipping\n", + dev->name); + return; + } + + printk(KERN_WARNING "%s: %s: resetting card\n", dev_info, dev->name); + hfa384x_disable_interrupts(dev); + local->hw_resetting = 1; + if (local->func->cor_sreset) { + /* Host system seems to hang in some cases with high traffic + * load or shared interrupts during COR sreset. Disable shared + * interrupts during reset to avoid these crashes. COS sreset + * takes quite a long time, so it is unfortunate that this + * seems to be needed. Anyway, I do not know of any better way + * of avoiding the crash. */ + disable_irq(dev->irq); + local->func->cor_sreset(local); + enable_irq(dev->irq); + } + prism2_hw_shutdown(dev, 1); + prism2_hw_config(dev, 0); + local->hw_resetting = 0; + +#ifdef PRISM2_DOWNLOAD_SUPPORT + if (local->dl_pri) { + printk(KERN_DEBUG "%s: persistent download of primary " + "firmware\n", dev->name); + if (prism2_download_genesis(local, local->dl_pri) < 0) + printk(KERN_WARNING "%s: download (PRI) failed\n", + dev->name); + } + + if (local->dl_sec) { + printk(KERN_DEBUG "%s: persistent download of secondary " + "firmware\n", dev->name); + if (prism2_download_volatile(local, local->dl_sec) < 0) + printk(KERN_WARNING "%s: download (SEC) failed\n", + dev->name); + } +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + /* TODO: restore beacon TIM bits for STAs that have buffered frames */ +} + + +static void prism2_schedule_reset(local_info_t *local) +{ + schedule_work(&local->reset_queue); +} + + +/* Called only as scheduled task after noticing card timeout in interrupt + * context */ +static void handle_reset_queue(struct work_struct *work) +{ + local_info_t *local = container_of(work, local_info_t, reset_queue); + + printk(KERN_DEBUG "%s: scheduled card reset\n", local->dev->name); + prism2_hw_reset(local->dev); + + if (netif_queue_stopped(local->dev)) { + int i; + + for (i = 0; i < PRISM2_TXFID_COUNT; i++) + if (local->intransmitfid[i] == PRISM2_TXFID_EMPTY) { + PDEBUG(DEBUG_EXTRA, "prism2_tx_timeout: " + "wake up queue\n"); + netif_wake_queue(local->dev); + break; + } + } +} + + +static int prism2_get_txfid_idx(local_info_t *local) +{ + int idx, end; + unsigned long flags; + + spin_lock_irqsave(&local->txfidlock, flags); + end = idx = local->next_txfid; + do { + if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) { + local->intransmitfid[idx] = PRISM2_TXFID_RESERVED; + spin_unlock_irqrestore(&local->txfidlock, flags); + return idx; + } + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + } while (idx != end); + spin_unlock_irqrestore(&local->txfidlock, flags); + + PDEBUG(DEBUG_EXTRA2, "prism2_get_txfid_idx: no room in txfid buf: " + "packet dropped\n"); + local->dev->stats.tx_dropped++; + + return -1; +} + + +/* Called only from hardware IRQ */ +static void prism2_transmit_cb(struct net_device *dev, long context, + u16 resp0, u16 res) +{ + struct hostap_interface *iface; + local_info_t *local; + int idx = (int) context; + + iface = netdev_priv(dev); + local = iface->local; + + if (res) { + printk(KERN_DEBUG "%s: prism2_transmit_cb - res=0x%02x\n", + dev->name, res); + return; + } + + if (idx < 0 || idx >= PRISM2_TXFID_COUNT) { + printk(KERN_DEBUG "%s: prism2_transmit_cb called with invalid " + "idx=%d\n", dev->name, idx); + return; + } + + if (!test_and_clear_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { + printk(KERN_DEBUG "%s: driver bug: prism2_transmit_cb called " + "with no pending transmit\n", dev->name); + } + + if (netif_queue_stopped(dev)) { + /* ready for next TX, so wake up queue that was stopped in + * prism2_transmit() */ + netif_wake_queue(dev); + } + + spin_lock(&local->txfidlock); + + /* With reclaim, Resp0 contains new txfid for transmit; the old txfid + * will be automatically allocated for the next TX frame */ + local->intransmitfid[idx] = resp0; + + PDEBUG(DEBUG_FID, "%s: prism2_transmit_cb: txfid[%d]=0x%04x, " + "resp0=0x%04x, transmit_txfid=0x%04x\n", + dev->name, idx, local->txfid[idx], + resp0, local->intransmitfid[local->next_txfid]); + + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + local->next_txfid = idx; + + /* check if all TX buffers are occupied */ + do { + if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) { + spin_unlock(&local->txfidlock); + return; + } + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + } while (idx != local->next_txfid); + spin_unlock(&local->txfidlock); + + /* no empty TX buffers, stop queue */ + netif_stop_queue(dev); +} + + +/* Called only from software IRQ if PCI bus master is not used (with bus master + * this can be called both from software and hardware IRQ) */ +static int prism2_transmit(struct net_device *dev, int idx) +{ + struct hostap_interface *iface; + local_info_t *local; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + /* The driver tries to stop netif queue so that there would not be + * more than one attempt to transmit frames going on; check that this + * is really the case */ + + if (test_and_set_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { + printk(KERN_DEBUG "%s: driver bug - prism2_transmit() called " + "when previous TX was pending\n", dev->name); + return -1; + } + + /* stop the queue for the time that transmit is pending */ + netif_stop_queue(dev); + + /* transmit packet */ + res = hfa384x_cmd_callback( + dev, + HFA384X_CMDCODE_TRANSMIT | HFA384X_CMD_TX_RECLAIM, + local->txfid[idx], + prism2_transmit_cb, (long) idx); + + if (res) { + printk(KERN_DEBUG "%s: prism2_transmit: CMDCODE_TRANSMIT " + "failed (res=%d)\n", dev->name, res); + dev->stats.tx_dropped++; + netif_wake_queue(dev); + return -1; + } + dev->trans_start = jiffies; + + /* Since we did not wait for command completion, the card continues + * to process on the background and we will finish handling when + * command completion event is handled (prism2_cmd_ev() function) */ + + return 0; +} + + +/* Send IEEE 802.11 frame (convert the header into Prism2 TX descriptor and + * send the payload with this descriptor) */ +/* Called only from software IRQ */ +static int prism2_tx_80211(struct sk_buff *skb, struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_tx_frame txdesc; + struct hostap_skb_tx_data *meta; + int hdr_len, data_len, idx, res, ret = -1; + u16 tx_control, fc; + + iface = netdev_priv(dev); + local = iface->local; + + meta = (struct hostap_skb_tx_data *) skb->cb; + + prism2_callback(local, PRISM2_CALLBACK_TX_START); + + if ((local->func->card_present && !local->func->card_present(local)) || + !local->hw_ready || local->hw_downloading || local->pri_only) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: prism2_tx_80211: hw not ready -" + " skipping\n", dev->name); + } + goto fail; + } + + memset(&txdesc, 0, sizeof(txdesc)); + + /* skb->data starts with txdesc->frame_control */ + hdr_len = 24; + skb_copy_from_linear_data(skb, &txdesc.frame_control, hdr_len); + fc = le16_to_cpu(txdesc.frame_control); + if (ieee80211_is_data(txdesc.frame_control) && + ieee80211_has_a4(txdesc.frame_control) && + skb->len >= 30) { + /* Addr4 */ + skb_copy_from_linear_data_offset(skb, hdr_len, txdesc.addr4, + ETH_ALEN); + hdr_len += ETH_ALEN; + } + + tx_control = local->tx_control; + if (meta->tx_cb_idx) { + tx_control |= HFA384X_TX_CTRL_TX_OK; + txdesc.sw_support = cpu_to_le32(meta->tx_cb_idx); + } + txdesc.tx_control = cpu_to_le16(tx_control); + txdesc.tx_rate = meta->rate; + + data_len = skb->len - hdr_len; + txdesc.data_len = cpu_to_le16(data_len); + txdesc.len = cpu_to_be16(data_len); + + idx = prism2_get_txfid_idx(local); + if (idx < 0) + goto fail; + + if (local->frame_dump & PRISM2_DUMP_TX_HDR) + hostap_dump_tx_header(dev->name, &txdesc); + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, local->txfid[idx], 0); + + if (!res) + res = hfa384x_to_bap(dev, BAP0, &txdesc, sizeof(txdesc)); + if (!res) + res = hfa384x_to_bap(dev, BAP0, skb->data + hdr_len, + skb->len - hdr_len); + spin_unlock(&local->baplock); + + if (!res) + res = prism2_transmit(dev, idx); + if (res) { + printk(KERN_DEBUG "%s: prism2_tx_80211 - to BAP0 failed\n", + dev->name); + local->intransmitfid[idx] = PRISM2_TXFID_EMPTY; + schedule_work(&local->reset_queue); + goto fail; + } + + ret = 0; + +fail: + prism2_callback(local, PRISM2_CALLBACK_TX_END); + return ret; +} + + +/* Some SMP systems have reported number of odd errors with hostap_pci. fid + * register has changed values between consecutive reads for an unknown reason. + * This should really not happen, so more debugging is needed. This test + * version is a bit slower, but it will detect most of such register changes + * and will try to get the correct fid eventually. */ +#define EXTRA_FID_READ_TESTS + +static u16 prism2_read_fid_reg(struct net_device *dev, u16 reg) +{ +#ifdef EXTRA_FID_READ_TESTS + u16 val, val2, val3; + int i; + + for (i = 0; i < 10; i++) { + val = HFA384X_INW(reg); + val2 = HFA384X_INW(reg); + val3 = HFA384X_INW(reg); + + if (val == val2 && val == val3) + return val; + + printk(KERN_DEBUG "%s: detected fid change (try=%d, reg=%04x):" + " %04x %04x %04x\n", + dev->name, i, reg, val, val2, val3); + if ((val == val2 || val == val3) && val != 0) + return val; + if (val2 == val3 && val2 != 0) + return val2; + } + printk(KERN_WARNING "%s: Uhhuh.. could not read good fid from reg " + "%04x (%04x %04x %04x)\n", dev->name, reg, val, val2, val3); + return val; +#else /* EXTRA_FID_READ_TESTS */ + return HFA384X_INW(reg); +#endif /* EXTRA_FID_READ_TESTS */ +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_rx(local_info_t *local) +{ + struct net_device *dev = local->dev; + int res, rx_pending = 0; + u16 len, hdr_len, rxfid, status, macport; + struct hfa384x_rx_frame rxdesc; + struct sk_buff *skb = NULL; + + prism2_callback(local, PRISM2_CALLBACK_RX_START); + + rxfid = prism2_read_fid_reg(dev, HFA384X_RXFID_OFF); +#ifndef final_version + if (rxfid == 0) { + rxfid = HFA384X_INW(HFA384X_RXFID_OFF); + printk(KERN_DEBUG "prism2_rx: rxfid=0 (next 0x%04x)\n", + rxfid); + if (rxfid == 0) { + schedule_work(&local->reset_queue); + goto rx_dropped; + } + /* try to continue with the new rxfid value */ + } +#endif + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, rxfid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, &rxdesc, sizeof(rxdesc)); + + if (res) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: copy from BAP0 failed %d\n", dev->name, + res); + if (res == -ETIMEDOUT) { + schedule_work(&local->reset_queue); + } + goto rx_dropped; + } + + len = le16_to_cpu(rxdesc.data_len); + hdr_len = sizeof(rxdesc); + status = le16_to_cpu(rxdesc.status); + macport = (status >> 8) & 0x07; + + /* Drop frames with too large reported payload length. Monitor mode + * seems to sometimes pass frames (e.g., ctrl::ack) with signed and + * negative value, so allow also values 65522 .. 65534 (-14 .. -2) for + * macport 7 */ + if (len > PRISM2_DATA_MAXLEN + 8 /* WEP */) { + if (macport == 7 && local->iw_mode == IW_MODE_MONITOR) { + if (len >= (u16) -14) { + hdr_len -= 65535 - len; + hdr_len--; + } + len = 0; + } else { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: Received frame with invalid " + "length 0x%04x\n", dev->name, len); + hostap_dump_rx_header(dev->name, &rxdesc); + goto rx_dropped; + } + } + + skb = dev_alloc_skb(len + hdr_len); + if (!skb) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: RX failed to allocate skb\n", + dev->name); + goto rx_dropped; + } + skb->dev = dev; + memcpy(skb_put(skb, hdr_len), &rxdesc, hdr_len); + + if (len > 0) + res = hfa384x_from_bap(dev, BAP0, skb_put(skb, len), len); + spin_unlock(&local->baplock); + if (res) { + printk(KERN_DEBUG "%s: RX failed to read " + "frame data\n", dev->name); + goto rx_dropped; + } + + skb_queue_tail(&local->rx_list, skb); + tasklet_schedule(&local->rx_tasklet); + + rx_exit: + prism2_callback(local, PRISM2_CALLBACK_RX_END); + if (!rx_pending) { + HFA384X_OUTW(HFA384X_EV_RX, HFA384X_EVACK_OFF); + } + + return; + + rx_dropped: + dev->stats.rx_dropped++; + if (skb) + dev_kfree_skb(skb); + goto rx_exit; +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_rx_skb(local_info_t *local, struct sk_buff *skb) +{ + struct hfa384x_rx_frame *rxdesc; + struct net_device *dev = skb->dev; + struct hostap_80211_rx_status stats; + int hdrlen, rx_hdrlen; + + rx_hdrlen = sizeof(*rxdesc); + if (skb->len < sizeof(*rxdesc)) { + /* Allow monitor mode to receive shorter frames */ + if (local->iw_mode == IW_MODE_MONITOR && + skb->len >= sizeof(*rxdesc) - 30) { + rx_hdrlen = skb->len; + } else { + dev_kfree_skb(skb); + return; + } + } + + rxdesc = (struct hfa384x_rx_frame *) skb->data; + + if (local->frame_dump & PRISM2_DUMP_RX_HDR && + skb->len >= sizeof(*rxdesc)) + hostap_dump_rx_header(dev->name, rxdesc); + + if (le16_to_cpu(rxdesc->status) & HFA384X_RX_STATUS_FCSERR && + (!local->monitor_allow_fcserr || + local->iw_mode != IW_MODE_MONITOR)) + goto drop; + + if (skb->len > PRISM2_DATA_MAXLEN) { + printk(KERN_DEBUG "%s: RX: len(%d) > MAX(%d)\n", + dev->name, skb->len, PRISM2_DATA_MAXLEN); + goto drop; + } + + stats.mac_time = le32_to_cpu(rxdesc->time); + stats.signal = rxdesc->signal - local->rssi_to_dBm; + stats.noise = rxdesc->silence - local->rssi_to_dBm; + stats.rate = rxdesc->rate; + + /* Convert Prism2 RX structure into IEEE 802.11 header */ + hdrlen = hostap_80211_get_hdrlen(rxdesc->frame_control); + if (hdrlen > rx_hdrlen) + hdrlen = rx_hdrlen; + + memmove(skb_pull(skb, rx_hdrlen - hdrlen), + &rxdesc->frame_control, hdrlen); + + hostap_80211_rx(dev, skb, &stats); + return; + + drop: + dev_kfree_skb(skb); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_rx_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct sk_buff *skb; + + while ((skb = skb_dequeue(&local->rx_list)) != NULL) + hostap_rx_skb(local, skb); +} + + +/* Called only from hardware IRQ */ +static void prism2_alloc_ev(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int idx; + u16 fid; + + iface = netdev_priv(dev); + local = iface->local; + + fid = prism2_read_fid_reg(dev, HFA384X_ALLOCFID_OFF); + + PDEBUG(DEBUG_FID, "FID: interrupt: ALLOC - fid=0x%04x\n", fid); + + spin_lock(&local->txfidlock); + idx = local->next_alloc; + + do { + if (local->txfid[idx] == fid) { + PDEBUG(DEBUG_FID, "FID: found matching txfid[%d]\n", + idx); + +#ifndef final_version + if (local->intransmitfid[idx] == PRISM2_TXFID_EMPTY) + printk("Already released txfid found at idx " + "%d\n", idx); + if (local->intransmitfid[idx] == PRISM2_TXFID_RESERVED) + printk("Already reserved txfid found at idx " + "%d\n", idx); +#endif + local->intransmitfid[idx] = PRISM2_TXFID_EMPTY; + idx++; + local->next_alloc = idx >= PRISM2_TXFID_COUNT ? 0 : + idx; + + if (!test_bit(HOSTAP_BITS_TRANSMIT, &local->bits) && + netif_queue_stopped(dev)) + netif_wake_queue(dev); + + spin_unlock(&local->txfidlock); + return; + } + + idx++; + if (idx >= PRISM2_TXFID_COUNT) + idx = 0; + } while (idx != local->next_alloc); + + printk(KERN_WARNING "%s: could not find matching txfid (0x%04x, new " + "read 0x%04x) for alloc event\n", dev->name, fid, + HFA384X_INW(HFA384X_ALLOCFID_OFF)); + printk(KERN_DEBUG "TXFIDs:"); + for (idx = 0; idx < PRISM2_TXFID_COUNT; idx++) + printk(" %04x[%04x]", local->txfid[idx], + local->intransmitfid[idx]); + printk("\n"); + spin_unlock(&local->txfidlock); + + /* FIX: should probably schedule reset; reference to one txfid was lost + * completely.. Bad things will happen if we run out of txfids + * Actually, this will cause netdev watchdog to notice TX timeout and + * then card reset after all txfids have been leaked. */ +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_tx_callback(local_info_t *local, + struct hfa384x_tx_frame *txdesc, int ok, + char *payload) +{ + u16 sw_support, hdrlen, len; + struct sk_buff *skb; + struct hostap_tx_callback_info *cb; + + /* Make sure that frame was from us. */ + if (!ether_addr_equal(txdesc->addr2, local->dev->dev_addr)) { + printk(KERN_DEBUG "%s: TX callback - foreign frame\n", + local->dev->name); + return; + } + + sw_support = le32_to_cpu(txdesc->sw_support); + + spin_lock(&local->lock); + cb = local->tx_callback; + while (cb != NULL && cb->idx != sw_support) + cb = cb->next; + spin_unlock(&local->lock); + + if (cb == NULL) { + printk(KERN_DEBUG "%s: could not find TX callback (idx %d)\n", + local->dev->name, sw_support); + return; + } + + hdrlen = hostap_80211_get_hdrlen(txdesc->frame_control); + len = le16_to_cpu(txdesc->data_len); + skb = dev_alloc_skb(hdrlen + len); + if (skb == NULL) { + printk(KERN_DEBUG "%s: hostap_tx_callback failed to allocate " + "skb\n", local->dev->name); + return; + } + + memcpy(skb_put(skb, hdrlen), (void *) &txdesc->frame_control, hdrlen); + if (payload) + memcpy(skb_put(skb, len), payload, len); + + skb->dev = local->dev; + skb_reset_mac_header(skb); + + cb->func(skb, ok, cb->data); +} + + +/* Called only as a tasklet (software IRQ) */ +static int hostap_tx_compl_read(local_info_t *local, int error, + struct hfa384x_tx_frame *txdesc, + char **payload) +{ + u16 fid, len; + int res, ret = 0; + struct net_device *dev = local->dev; + + fid = prism2_read_fid_reg(dev, HFA384X_TXCOMPLFID_OFF); + + PDEBUG(DEBUG_FID, "interrupt: TX (err=%d) - fid=0x%04x\n", fid, error); + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, fid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, txdesc, sizeof(*txdesc)); + if (res) { + PDEBUG(DEBUG_EXTRA, "%s: TX (err=%d) - fid=0x%04x - could not " + "read txdesc\n", dev->name, error, fid); + if (res == -ETIMEDOUT) { + schedule_work(&local->reset_queue); + } + ret = -1; + goto fail; + } + if (txdesc->sw_support) { + len = le16_to_cpu(txdesc->data_len); + if (len < PRISM2_DATA_MAXLEN) { + *payload = kmalloc(len, GFP_ATOMIC); + if (*payload == NULL || + hfa384x_from_bap(dev, BAP0, *payload, len)) { + PDEBUG(DEBUG_EXTRA, "%s: could not read TX " + "frame payload\n", dev->name); + kfree(*payload); + *payload = NULL; + ret = -1; + goto fail; + } + } + } + + fail: + spin_unlock(&local->baplock); + + return ret; +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_tx_ev(local_info_t *local) +{ + struct net_device *dev = local->dev; + char *payload = NULL; + struct hfa384x_tx_frame txdesc; + + if (hostap_tx_compl_read(local, 0, &txdesc, &payload)) + goto fail; + + if (local->frame_dump & PRISM2_DUMP_TX_HDR) { + PDEBUG(DEBUG_EXTRA, "%s: TX - status=0x%04x " + "retry_count=%d tx_rate=%d seq_ctrl=%d " + "duration_id=%d\n", + dev->name, le16_to_cpu(txdesc.status), + txdesc.retry_count, txdesc.tx_rate, + le16_to_cpu(txdesc.seq_ctrl), + le16_to_cpu(txdesc.duration_id)); + } + + if (txdesc.sw_support) + hostap_tx_callback(local, &txdesc, 1, payload); + kfree(payload); + + fail: + HFA384X_OUTW(HFA384X_EV_TX, HFA384X_EVACK_OFF); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_sta_tx_exc_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct sk_buff *skb; + + while ((skb = skb_dequeue(&local->sta_tx_exc_list)) != NULL) { + struct hfa384x_tx_frame *txdesc = + (struct hfa384x_tx_frame *) skb->data; + + if (skb->len >= sizeof(*txdesc)) { + /* Convert Prism2 RX structure into IEEE 802.11 header + */ + int hdrlen = hostap_80211_get_hdrlen(txdesc->frame_control); + memmove(skb_pull(skb, sizeof(*txdesc) - hdrlen), + &txdesc->frame_control, hdrlen); + + hostap_handle_sta_tx_exc(local, skb); + } + dev_kfree_skb(skb); + } +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_txexc(local_info_t *local) +{ + struct net_device *dev = local->dev; + u16 status, fc; + int show_dump, res; + char *payload = NULL; + struct hfa384x_tx_frame txdesc; + + show_dump = local->frame_dump & PRISM2_DUMP_TXEXC_HDR; + dev->stats.tx_errors++; + + res = hostap_tx_compl_read(local, 1, &txdesc, &payload); + HFA384X_OUTW(HFA384X_EV_TXEXC, HFA384X_EVACK_OFF); + if (res) + return; + + status = le16_to_cpu(txdesc.status); + + /* We produce a TXDROP event only for retry or lifetime + * exceeded, because that's the only status that really mean + * that this particular node went away. + * Other errors means that *we* screwed up. - Jean II */ + if (status & (HFA384X_TX_STATUS_RETRYERR | HFA384X_TX_STATUS_AGEDERR)) + { + union iwreq_data wrqu; + + /* Copy 802.11 dest address. */ + memcpy(wrqu.addr.sa_data, txdesc.addr1, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); + } else + show_dump = 1; + + if (local->iw_mode == IW_MODE_MASTER || + local->iw_mode == IW_MODE_REPEAT || + local->wds_type & HOSTAP_WDS_AP_CLIENT) { + struct sk_buff *skb; + skb = dev_alloc_skb(sizeof(txdesc)); + if (skb) { + memcpy(skb_put(skb, sizeof(txdesc)), &txdesc, + sizeof(txdesc)); + skb_queue_tail(&local->sta_tx_exc_list, skb); + tasklet_schedule(&local->sta_tx_exc_tasklet); + } + } + + if (txdesc.sw_support) + hostap_tx_callback(local, &txdesc, 0, payload); + kfree(payload); + + if (!show_dump) + return; + + PDEBUG(DEBUG_EXTRA, "%s: TXEXC - status=0x%04x (%s%s%s%s)" + " tx_control=%04x\n", + dev->name, status, + status & HFA384X_TX_STATUS_RETRYERR ? "[RetryErr]" : "", + status & HFA384X_TX_STATUS_AGEDERR ? "[AgedErr]" : "", + status & HFA384X_TX_STATUS_DISCON ? "[Discon]" : "", + status & HFA384X_TX_STATUS_FORMERR ? "[FormErr]" : "", + le16_to_cpu(txdesc.tx_control)); + + fc = le16_to_cpu(txdesc.frame_control); + PDEBUG(DEBUG_EXTRA, " retry_count=%d tx_rate=%d fc=0x%04x " + "(%s%s%s::%d%s%s)\n", + txdesc.retry_count, txdesc.tx_rate, fc, + ieee80211_is_mgmt(txdesc.frame_control) ? "Mgmt" : "", + ieee80211_is_ctl(txdesc.frame_control) ? "Ctrl" : "", + ieee80211_is_data(txdesc.frame_control) ? "Data" : "", + (fc & IEEE80211_FCTL_STYPE) >> 4, + ieee80211_has_tods(txdesc.frame_control) ? " ToDS" : "", + ieee80211_has_fromds(txdesc.frame_control) ? " FromDS" : ""); + PDEBUG(DEBUG_EXTRA, " A1=%pM A2=%pM A3=%pM A4=%pM\n", + txdesc.addr1, txdesc.addr2, + txdesc.addr3, txdesc.addr4); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_info_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct sk_buff *skb; + + while ((skb = skb_dequeue(&local->info_list)) != NULL) { + hostap_info_process(local, skb); + dev_kfree_skb(skb); + } +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info(local_info_t *local) +{ + struct net_device *dev = local->dev; + u16 fid; + int res, left; + struct hfa384x_info_frame info; + struct sk_buff *skb; + + fid = HFA384X_INW(HFA384X_INFOFID_OFF); + + spin_lock(&local->baplock); + res = hfa384x_setup_bap(dev, BAP0, fid, 0); + if (!res) + res = hfa384x_from_bap(dev, BAP0, &info, sizeof(info)); + if (res) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "Could not get info frame (fid=0x%04x)\n", + fid); + if (res == -ETIMEDOUT) { + schedule_work(&local->reset_queue); + } + goto out; + } + + left = (le16_to_cpu(info.len) - 1) * 2; + + if (info.len & cpu_to_le16(0x8000) || info.len == 0 || left > 2060) { + /* data register seems to give 0x8000 in some error cases even + * though busy bit is not set in offset register; + * in addition, length must be at least 1 due to type field */ + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: Received info frame with invalid " + "length 0x%04x (type 0x%04x)\n", dev->name, + le16_to_cpu(info.len), le16_to_cpu(info.type)); + goto out; + } + + skb = dev_alloc_skb(sizeof(info) + left); + if (skb == NULL) { + spin_unlock(&local->baplock); + printk(KERN_DEBUG "%s: Could not allocate skb for info " + "frame\n", dev->name); + goto out; + } + + memcpy(skb_put(skb, sizeof(info)), &info, sizeof(info)); + if (left > 0 && hfa384x_from_bap(dev, BAP0, skb_put(skb, left), left)) + { + spin_unlock(&local->baplock); + printk(KERN_WARNING "%s: Info frame read failed (fid=0x%04x, " + "len=0x%04x, type=0x%04x\n", dev->name, fid, + le16_to_cpu(info.len), le16_to_cpu(info.type)); + dev_kfree_skb(skb); + goto out; + } + spin_unlock(&local->baplock); + + skb_queue_tail(&local->info_list, skb); + tasklet_schedule(&local->info_tasklet); + + out: + HFA384X_OUTW(HFA384X_EV_INFO, HFA384X_EVACK_OFF); +} + + +/* Called only as a tasklet (software IRQ) */ +static void hostap_bap_tasklet(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct net_device *dev = local->dev; + u16 ev; + int frames = 30; + + if (local->func->card_present && !local->func->card_present(local)) + return; + + set_bit(HOSTAP_BITS_BAP_TASKLET, &local->bits); + + /* Process all pending BAP events without generating new interrupts + * for them */ + while (frames-- > 0) { + ev = HFA384X_INW(HFA384X_EVSTAT_OFF); + if (ev == 0xffff || !(ev & HFA384X_BAP0_EVENTS)) + break; + if (ev & HFA384X_EV_RX) + prism2_rx(local); + if (ev & HFA384X_EV_INFO) + prism2_info(local); + if (ev & HFA384X_EV_TX) + prism2_tx_ev(local); + if (ev & HFA384X_EV_TXEXC) + prism2_txexc(local); + } + + set_bit(HOSTAP_BITS_BAP_TASKLET2, &local->bits); + clear_bit(HOSTAP_BITS_BAP_TASKLET, &local->bits); + + /* Enable interrupts for new BAP events */ + hfa384x_events_all(dev); + clear_bit(HOSTAP_BITS_BAP_TASKLET2, &local->bits); +} + + +/* Called only from hardware IRQ */ +static void prism2_infdrop(struct net_device *dev) +{ + static unsigned long last_inquire = 0; + + PDEBUG(DEBUG_EXTRA, "%s: INFDROP event\n", dev->name); + + /* some firmware versions seem to get stuck with + * full CommTallies in high traffic load cases; every + * packet will then cause INFDROP event and CommTallies + * info frame will not be sent automatically. Try to + * get out of this state by inquiring CommTallies. */ + if (!last_inquire || time_after(jiffies, last_inquire + HZ)) { + hfa384x_cmd_callback(dev, HFA384X_CMDCODE_INQUIRE, + HFA384X_INFO_COMMTALLIES, NULL, 0); + last_inquire = jiffies; + } +} + + +/* Called only from hardware IRQ */ +static void prism2_ev_tick(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 evstat, inten; + static int prev_stuck = 0; + + iface = netdev_priv(dev); + local = iface->local; + + if (time_after(jiffies, local->last_tick_timer + 5 * HZ) && + local->last_tick_timer) { + evstat = HFA384X_INW(HFA384X_EVSTAT_OFF); + inten = HFA384X_INW(HFA384X_INTEN_OFF); + if (!prev_stuck) { + printk(KERN_INFO "%s: SW TICK stuck? " + "bits=0x%lx EvStat=%04x IntEn=%04x\n", + dev->name, local->bits, evstat, inten); + } + local->sw_tick_stuck++; + if ((evstat & HFA384X_BAP0_EVENTS) && + (inten & HFA384X_BAP0_EVENTS)) { + printk(KERN_INFO "%s: trying to recover from IRQ " + "hang\n", dev->name); + hfa384x_events_no_bap0(dev); + } + prev_stuck = 1; + } else + prev_stuck = 0; +} + + +/* Called only from hardware IRQ */ +static void prism2_check_magic(local_info_t *local) +{ + /* at least PCI Prism2.5 with bus mastering seems to sometimes + * return 0x0000 in SWSUPPORT0 for unknown reason, but re-reading the + * register once or twice seems to get the correct value.. PCI cards + * cannot anyway be removed during normal operation, so there is not + * really any need for this verification with them. */ + +#ifndef PRISM2_PCI +#ifndef final_version + static unsigned long last_magic_err = 0; + struct net_device *dev = local->dev; + + if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != HFA384X_MAGIC) { + if (!local->hw_ready) + return; + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); + if (time_after(jiffies, last_magic_err + 10 * HZ)) { + printk("%s: Interrupt, but SWSUPPORT0 does not match: " + "%04X != %04X - card removed?\n", dev->name, + HFA384X_INW(HFA384X_SWSUPPORT0_OFF), + HFA384X_MAGIC); + last_magic_err = jiffies; + } else if (net_ratelimit()) { + printk(KERN_DEBUG "%s: interrupt - SWSUPPORT0=%04x " + "MAGIC=%04x\n", dev->name, + HFA384X_INW(HFA384X_SWSUPPORT0_OFF), + HFA384X_MAGIC); + } + if (HFA384X_INW(HFA384X_SWSUPPORT0_OFF) != 0xffff) + schedule_work(&local->reset_queue); + return; + } +#endif /* final_version */ +#endif /* !PRISM2_PCI */ +} + + +/* Called only from hardware IRQ */ +static irqreturn_t prism2_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct hostap_interface *iface; + local_info_t *local; + int events = 0; + u16 ev; + + iface = netdev_priv(dev); + local = iface->local; + + /* Detect early interrupt before driver is fully configured */ + spin_lock(&local->irq_init_lock); + if (!dev->base_addr) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n", + dev->name); + } + spin_unlock(&local->irq_init_lock); + return IRQ_HANDLED; + } + spin_unlock(&local->irq_init_lock); + + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0); + + if (local->func->card_present && !local->func->card_present(local)) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: Interrupt, but dev not OK\n", + dev->name); + } + return IRQ_HANDLED; + } + + prism2_check_magic(local); + + for (;;) { + ev = HFA384X_INW(HFA384X_EVSTAT_OFF); + if (ev == 0xffff) { + if (local->shutdown) + return IRQ_HANDLED; + HFA384X_OUTW(0xffff, HFA384X_EVACK_OFF); + printk(KERN_DEBUG "%s: prism2_interrupt: ev=0xffff\n", + dev->name); + return IRQ_HANDLED; + } + + ev &= HFA384X_INW(HFA384X_INTEN_OFF); + if (ev == 0) + break; + + if (ev & HFA384X_EV_CMD) { + prism2_cmd_ev(dev); + } + + /* Above events are needed even before hw is ready, but other + * events should be skipped during initialization. This may + * change for AllocEv if allocate_fid is implemented without + * busy waiting. */ + if (!local->hw_ready || local->hw_resetting || + !local->dev_enabled) { + ev = HFA384X_INW(HFA384X_EVSTAT_OFF); + if (ev & HFA384X_EV_CMD) + goto next_event; + if ((ev & HFA384X_EVENT_MASK) == 0) + return IRQ_HANDLED; + if (local->dev_enabled && (ev & ~HFA384X_EV_TICK) && + net_ratelimit()) { + printk(KERN_DEBUG "%s: prism2_interrupt: hw " + "not ready; skipping events 0x%04x " + "(IntEn=0x%04x)%s%s%s\n", + dev->name, ev, + HFA384X_INW(HFA384X_INTEN_OFF), + !local->hw_ready ? " (!hw_ready)" : "", + local->hw_resetting ? + " (hw_resetting)" : "", + !local->dev_enabled ? + " (!dev_enabled)" : ""); + } + HFA384X_OUTW(ev, HFA384X_EVACK_OFF); + return IRQ_HANDLED; + } + + if (ev & HFA384X_EV_TICK) { + prism2_ev_tick(dev); + HFA384X_OUTW(HFA384X_EV_TICK, HFA384X_EVACK_OFF); + } + + if (ev & HFA384X_EV_ALLOC) { + prism2_alloc_ev(dev); + HFA384X_OUTW(HFA384X_EV_ALLOC, HFA384X_EVACK_OFF); + } + + /* Reading data from the card is quite time consuming, so do it + * in tasklets. TX, TXEXC, RX, and INFO events will be ACKed + * and unmasked after needed data has been read completely. */ + if (ev & HFA384X_BAP0_EVENTS) { + hfa384x_events_no_bap0(dev); + tasklet_schedule(&local->bap_tasklet); + } + +#ifndef final_version + if (ev & HFA384X_EV_WTERR) { + PDEBUG(DEBUG_EXTRA, "%s: WTERR event\n", dev->name); + HFA384X_OUTW(HFA384X_EV_WTERR, HFA384X_EVACK_OFF); + } +#endif /* final_version */ + + if (ev & HFA384X_EV_INFDROP) { + prism2_infdrop(dev); + HFA384X_OUTW(HFA384X_EV_INFDROP, HFA384X_EVACK_OFF); + } + + next_event: + events++; + if (events >= PRISM2_MAX_INTERRUPT_EVENTS) { + PDEBUG(DEBUG_EXTRA, "prism2_interrupt: >%d events " + "(EvStat=0x%04x)\n", + PRISM2_MAX_INTERRUPT_EVENTS, + HFA384X_INW(HFA384X_EVSTAT_OFF)); + break; + } + } + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 1); + return IRQ_RETVAL(events); +} + + +static void prism2_check_sta_fw_version(local_info_t *local) +{ + struct hfa384x_comp_ident comp; + int id, variant, major, minor; + + if (hfa384x_get_rid(local->dev, HFA384X_RID_STAID, + &comp, sizeof(comp), 1) < 0) + return; + + local->fw_ap = 0; + id = le16_to_cpu(comp.id); + if (id != HFA384X_COMP_ID_STA) { + if (id == HFA384X_COMP_ID_FW_AP) + local->fw_ap = 1; + return; + } + + major = __le16_to_cpu(comp.major); + minor = __le16_to_cpu(comp.minor); + variant = __le16_to_cpu(comp.variant); + local->sta_fw_ver = PRISM2_FW_VER(major, minor, variant); + + /* Station firmware versions before 1.4.x seem to have a bug in + * firmware-based WEP encryption when using Host AP mode, so use + * host_encrypt as a default for them. Firmware version 1.4.9 is the + * first one that has been seen to produce correct encryption, but the + * bug might be fixed before that (although, at least 1.4.2 is broken). + */ + local->fw_encrypt_ok = local->sta_fw_ver >= PRISM2_FW_VER(1,4,9); + + if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && + !local->fw_encrypt_ok) { + printk(KERN_DEBUG "%s: defaulting to host-based encryption as " + "a workaround for firmware bug in Host AP mode WEP\n", + local->dev->name); + local->host_encrypt = 1; + } + + /* IEEE 802.11 standard compliant WDS frames (4 addresses) were broken + * in station firmware versions before 1.5.x. With these versions, the + * driver uses a workaround with bogus frame format (4th address after + * the payload). This is not compatible with other AP devices. Since + * the firmware bug is fixed in the latest station firmware versions, + * automatically enable standard compliant mode for cards using station + * firmware version 1.5.0 or newer. */ + if (local->sta_fw_ver >= PRISM2_FW_VER(1,5,0)) + local->wds_type |= HOSTAP_WDS_STANDARD_FRAME; + else { + printk(KERN_DEBUG "%s: defaulting to bogus WDS frame as a " + "workaround for firmware bug in Host AP mode WDS\n", + local->dev->name); + } + + hostap_check_sta_fw_version(local->ap, local->sta_fw_ver); +} + + +static void hostap_passive_scan(unsigned long data) +{ + local_info_t *local = (local_info_t *) data; + struct net_device *dev = local->dev; + u16 chan; + + if (local->passive_scan_interval <= 0) + return; + + if (local->passive_scan_state == PASSIVE_SCAN_LISTEN) { + int max_tries = 16; + + /* Even though host system does not really know when the WLAN + * MAC is sending frames, try to avoid changing channels for + * passive scanning when a host-generated frame is being + * transmitted */ + if (test_bit(HOSTAP_BITS_TRANSMIT, &local->bits)) { + printk(KERN_DEBUG "%s: passive scan detected pending " + "TX - delaying\n", dev->name); + local->passive_scan_timer.expires = jiffies + HZ / 10; + add_timer(&local->passive_scan_timer); + return; + } + + do { + local->passive_scan_channel++; + if (local->passive_scan_channel > 14) + local->passive_scan_channel = 1; + max_tries--; + } while (!(local->channel_mask & + (1 << (local->passive_scan_channel - 1))) && + max_tries > 0); + + if (max_tries == 0) { + printk(KERN_INFO "%s: no allowed passive scan channels" + " found\n", dev->name); + return; + } + + printk(KERN_DEBUG "%s: passive scan channel %d\n", + dev->name, local->passive_scan_channel); + chan = local->passive_scan_channel; + local->passive_scan_state = PASSIVE_SCAN_WAIT; + local->passive_scan_timer.expires = jiffies + HZ / 10; + } else { + chan = local->channel; + local->passive_scan_state = PASSIVE_SCAN_LISTEN; + local->passive_scan_timer.expires = jiffies + + local->passive_scan_interval * HZ; + } + + if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_CHANGE_CHANNEL << 8), + chan, NULL, 0)) + printk(KERN_ERR "%s: passive scan channel set %d " + "failed\n", dev->name, chan); + + add_timer(&local->passive_scan_timer); +} + + +/* Called only as a scheduled task when communications quality values should + * be updated. */ +static void handle_comms_qual_update(struct work_struct *work) +{ + local_info_t *local = + container_of(work, local_info_t, comms_qual_update); + prism2_update_comms_qual(local->dev); +} + + +/* Software watchdog - called as a timer. Hardware interrupt (Tick event) is + * used to monitor that local->last_tick_timer is being updated. If not, + * interrupt busy-loop is assumed and driver tries to recover by masking out + * some events. */ +static void hostap_tick_timer(unsigned long data) +{ + static unsigned long last_inquire = 0; + local_info_t *local = (local_info_t *) data; + local->last_tick_timer = jiffies; + + /* Inquire CommTallies every 10 seconds to keep the statistics updated + * more often during low load and when using 32-bit tallies. */ + if ((!last_inquire || time_after(jiffies, last_inquire + 10 * HZ)) && + !local->hw_downloading && local->hw_ready && + !local->hw_resetting && local->dev_enabled) { + hfa384x_cmd_callback(local->dev, HFA384X_CMDCODE_INQUIRE, + HFA384X_INFO_COMMTALLIES, NULL, 0); + last_inquire = jiffies; + } + + if ((local->last_comms_qual_update == 0 || + time_after(jiffies, local->last_comms_qual_update + 10 * HZ)) && + (local->iw_mode == IW_MODE_INFRA || + local->iw_mode == IW_MODE_ADHOC)) { + schedule_work(&local->comms_qual_update); + } + + local->tick_timer.expires = jiffies + 2 * HZ; + add_timer(&local->tick_timer); +} + + +#ifndef PRISM2_NO_PROCFS_DEBUG +static int prism2_registers_proc_show(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + +#define SHOW_REG(n) \ + seq_printf(m, #n "=%04x\n", hfa384x_read_reg(local->dev, HFA384X_##n##_OFF)) + + SHOW_REG(CMD); + SHOW_REG(PARAM0); + SHOW_REG(PARAM1); + SHOW_REG(PARAM2); + SHOW_REG(STATUS); + SHOW_REG(RESP0); + SHOW_REG(RESP1); + SHOW_REG(RESP2); + SHOW_REG(INFOFID); + SHOW_REG(CONTROL); + SHOW_REG(SELECT0); + SHOW_REG(SELECT1); + SHOW_REG(OFFSET0); + SHOW_REG(OFFSET1); + SHOW_REG(RXFID); + SHOW_REG(ALLOCFID); + SHOW_REG(TXCOMPLFID); + SHOW_REG(SWSUPPORT0); + SHOW_REG(SWSUPPORT1); + SHOW_REG(SWSUPPORT2); + SHOW_REG(EVSTAT); + SHOW_REG(INTEN); + SHOW_REG(EVACK); + /* Do not read data registers, because they change the state of the + * MAC (offset += 2) */ + /* SHOW_REG(DATA0); */ + /* SHOW_REG(DATA1); */ + SHOW_REG(AUXPAGE); + SHOW_REG(AUXOFFSET); + /* SHOW_REG(AUXDATA); */ +#ifdef PRISM2_PCI + SHOW_REG(PCICOR); + SHOW_REG(PCIHCR); + SHOW_REG(PCI_M0_ADDRH); + SHOW_REG(PCI_M0_ADDRL); + SHOW_REG(PCI_M0_LEN); + SHOW_REG(PCI_M0_CTL); + SHOW_REG(PCI_STATUS); + SHOW_REG(PCI_M1_ADDRH); + SHOW_REG(PCI_M1_ADDRL); + SHOW_REG(PCI_M1_LEN); + SHOW_REG(PCI_M1_CTL); +#endif /* PRISM2_PCI */ + + return 0; +} + +static int prism2_registers_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, prism2_registers_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations prism2_registers_proc_fops = { + .open = prism2_registers_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +#endif /* PRISM2_NO_PROCFS_DEBUG */ + + +struct set_tim_data { + struct list_head list; + int aid; + int set; +}; + +static int prism2_set_tim(struct net_device *dev, int aid, int set) +{ + struct list_head *ptr; + struct set_tim_data *new_entry; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + new_entry = kzalloc(sizeof(*new_entry), GFP_ATOMIC); + if (new_entry == NULL) + return -ENOMEM; + + new_entry->aid = aid; + new_entry->set = set; + + spin_lock_bh(&local->set_tim_lock); + list_for_each(ptr, &local->set_tim_list) { + struct set_tim_data *entry = + list_entry(ptr, struct set_tim_data, list); + if (entry->aid == aid) { + PDEBUG(DEBUG_PS2, "%s: prism2_set_tim: aid=%d " + "set=%d ==> %d\n", + local->dev->name, aid, entry->set, set); + entry->set = set; + kfree(new_entry); + new_entry = NULL; + break; + } + } + if (new_entry) + list_add_tail(&new_entry->list, &local->set_tim_list); + spin_unlock_bh(&local->set_tim_lock); + + schedule_work(&local->set_tim_queue); + + return 0; +} + + +static void handle_set_tim_queue(struct work_struct *work) +{ + local_info_t *local = container_of(work, local_info_t, set_tim_queue); + struct set_tim_data *entry; + u16 val; + + for (;;) { + entry = NULL; + spin_lock_bh(&local->set_tim_lock); + if (!list_empty(&local->set_tim_list)) { + entry = list_entry(local->set_tim_list.next, + struct set_tim_data, list); + list_del(&entry->list); + } + spin_unlock_bh(&local->set_tim_lock); + if (!entry) + break; + + PDEBUG(DEBUG_PS2, "%s: handle_set_tim_queue: aid=%d set=%d\n", + local->dev->name, entry->aid, entry->set); + + val = entry->aid; + if (entry->set) + val |= 0x8000; + if (hostap_set_word(local->dev, HFA384X_RID_CNFTIMCTRL, val)) { + printk(KERN_DEBUG "%s: set_tim failed (aid=%d " + "set=%d)\n", + local->dev->name, entry->aid, entry->set); + } + + kfree(entry); + } +} + + +static void prism2_clear_set_tim_queue(local_info_t *local) +{ + struct list_head *ptr, *n; + + list_for_each_safe(ptr, n, &local->set_tim_list) { + struct set_tim_data *entry; + entry = list_entry(ptr, struct set_tim_data, list); + list_del(&entry->list); + kfree(entry); + } +} + + +/* + * HostAP uses two layers of net devices, where the inner + * layer gets called all the time from the outer layer. + * This is a natural nesting, which needs a split lock type. + */ +static struct lock_class_key hostap_netdev_xmit_lock_key; +static struct lock_class_key hostap_netdev_addr_lock_key; + +static void prism2_set_lockdep_class_one(struct net_device *dev, + struct netdev_queue *txq, + void *_unused) +{ + lockdep_set_class(&txq->_xmit_lock, + &hostap_netdev_xmit_lock_key); +} + +static void prism2_set_lockdep_class(struct net_device *dev) +{ + lockdep_set_class(&dev->addr_list_lock, + &hostap_netdev_addr_lock_key); + netdev_for_each_tx_queue(dev, prism2_set_lockdep_class_one, NULL); +} + +static struct net_device * +prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx, + struct device *sdev) +{ + struct net_device *dev; + struct hostap_interface *iface; + struct local_info *local; + int len, i, ret; + + if (funcs == NULL) + return NULL; + + len = strlen(dev_template); + if (len >= IFNAMSIZ || strstr(dev_template, "%d") == NULL) { + printk(KERN_WARNING "hostap: Invalid dev_template='%s'\n", + dev_template); + return NULL; + } + + len = sizeof(struct hostap_interface) + + 3 + sizeof(struct local_info) + + 3 + sizeof(struct ap_data); + + dev = alloc_etherdev(len); + if (dev == NULL) + return NULL; + + iface = netdev_priv(dev); + local = (struct local_info *) ((((long) (iface + 1)) + 3) & ~3); + local->ap = (struct ap_data *) ((((long) (local + 1)) + 3) & ~3); + local->dev = iface->dev = dev; + iface->local = local; + iface->type = HOSTAP_INTERFACE_MASTER; + INIT_LIST_HEAD(&local->hostap_interfaces); + + local->hw_module = THIS_MODULE; + +#ifdef PRISM2_IO_DEBUG + local->io_debug_enabled = 1; +#endif /* PRISM2_IO_DEBUG */ + + local->func = funcs; + local->func->cmd = hfa384x_cmd; + local->func->read_regs = hfa384x_read_regs; + local->func->get_rid = hfa384x_get_rid; + local->func->set_rid = hfa384x_set_rid; + local->func->hw_enable = prism2_hw_enable; + local->func->hw_config = prism2_hw_config; + local->func->hw_reset = prism2_hw_reset; + local->func->hw_shutdown = prism2_hw_shutdown; + local->func->reset_port = prism2_reset_port; + local->func->schedule_reset = prism2_schedule_reset; +#ifdef PRISM2_DOWNLOAD_SUPPORT + local->func->read_aux_fops = &prism2_download_aux_dump_proc_fops; + local->func->download = prism2_download; +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + local->func->tx = prism2_tx_80211; + local->func->set_tim = prism2_set_tim; + local->func->need_tx_headroom = 0; /* no need to add txdesc in + * skb->data (FIX: maybe for DMA bus + * mastering? */ + + local->mtu = mtu; + + rwlock_init(&local->iface_lock); + spin_lock_init(&local->txfidlock); + spin_lock_init(&local->cmdlock); + spin_lock_init(&local->baplock); + spin_lock_init(&local->lock); + spin_lock_init(&local->irq_init_lock); + mutex_init(&local->rid_bap_mtx); + + if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES) + card_idx = 0; + local->card_idx = card_idx; + + len = strlen(essid); + memcpy(local->essid, essid, + len > MAX_SSID_LEN ? MAX_SSID_LEN : len); + local->essid[MAX_SSID_LEN] = '\0'; + i = GET_INT_PARM(iw_mode, card_idx); + if ((i >= IW_MODE_ADHOC && i <= IW_MODE_REPEAT) || + i == IW_MODE_MONITOR) { + local->iw_mode = i; + } else { + printk(KERN_WARNING "prism2: Unknown iw_mode %d; using " + "IW_MODE_MASTER\n", i); + local->iw_mode = IW_MODE_MASTER; + } + local->channel = GET_INT_PARM(channel, card_idx); + local->beacon_int = GET_INT_PARM(beacon_int, card_idx); + local->dtim_period = GET_INT_PARM(dtim_period, card_idx); + local->wds_max_connections = 16; + local->tx_control = HFA384X_TX_CTRL_FLAGS; + local->manual_retry_count = -1; + local->rts_threshold = 2347; + local->fragm_threshold = 2346; + local->rssi_to_dBm = 100; /* default; to be overriden by + * cnfDbmAdjust, if available */ + local->auth_algs = PRISM2_AUTH_OPEN | PRISM2_AUTH_SHARED_KEY; + local->sram_type = -1; + local->scan_channel_mask = 0xffff; + local->monitor_type = PRISM2_MONITOR_RADIOTAP; + + /* Initialize task queue structures */ + INIT_WORK(&local->reset_queue, handle_reset_queue); + INIT_WORK(&local->set_multicast_list_queue, + hostap_set_multicast_list_queue); + + INIT_WORK(&local->set_tim_queue, handle_set_tim_queue); + INIT_LIST_HEAD(&local->set_tim_list); + spin_lock_init(&local->set_tim_lock); + + INIT_WORK(&local->comms_qual_update, handle_comms_qual_update); + + /* Initialize tasklets for handling hardware IRQ related operations + * outside hw IRQ handler */ +#define HOSTAP_TASKLET_INIT(q, f, d) \ +do { memset((q), 0, sizeof(*(q))); (q)->func = (f); (q)->data = (d); } \ +while (0) + HOSTAP_TASKLET_INIT(&local->bap_tasklet, hostap_bap_tasklet, + (unsigned long) local); + + HOSTAP_TASKLET_INIT(&local->info_tasklet, hostap_info_tasklet, + (unsigned long) local); + hostap_info_init(local); + + HOSTAP_TASKLET_INIT(&local->rx_tasklet, + hostap_rx_tasklet, (unsigned long) local); + skb_queue_head_init(&local->rx_list); + + HOSTAP_TASKLET_INIT(&local->sta_tx_exc_tasklet, + hostap_sta_tx_exc_tasklet, (unsigned long) local); + skb_queue_head_init(&local->sta_tx_exc_list); + + INIT_LIST_HEAD(&local->cmd_queue); + init_waitqueue_head(&local->hostscan_wq); + + lib80211_crypt_info_init(&local->crypt_info, dev->name, &local->lock); + + init_timer(&local->passive_scan_timer); + local->passive_scan_timer.data = (unsigned long) local; + local->passive_scan_timer.function = hostap_passive_scan; + + init_timer(&local->tick_timer); + local->tick_timer.data = (unsigned long) local; + local->tick_timer.function = hostap_tick_timer; + local->tick_timer.expires = jiffies + 2 * HZ; + add_timer(&local->tick_timer); + + INIT_LIST_HEAD(&local->bss_list); + + hostap_setup_dev(dev, local, HOSTAP_INTERFACE_MASTER); + + dev->type = ARPHRD_IEEE80211; + dev->header_ops = &hostap_80211_ops; + + rtnl_lock(); + ret = dev_alloc_name(dev, "wifi%d"); + SET_NETDEV_DEV(dev, sdev); + if (ret >= 0) + ret = register_netdevice(dev); + + prism2_set_lockdep_class(dev); + rtnl_unlock(); + if (ret < 0) { + printk(KERN_WARNING "%s: register netdevice failed!\n", + dev_info); + goto fail; + } + printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name); + + hostap_init_data(local); + return dev; + + fail: + free_netdev(dev); + return NULL; +} + + +static int hostap_hw_ready(struct net_device *dev) +{ + struct hostap_interface *iface; + struct local_info *local; + + iface = netdev_priv(dev); + local = iface->local; + local->ddev = hostap_add_interface(local, HOSTAP_INTERFACE_MAIN, 0, + "", dev_template); + + if (local->ddev) { + if (local->iw_mode == IW_MODE_INFRA || + local->iw_mode == IW_MODE_ADHOC) { + netif_carrier_off(local->dev); + netif_carrier_off(local->ddev); + } + hostap_init_proc(local); +#ifndef PRISM2_NO_PROCFS_DEBUG + proc_create_data("registers", 0, local->proc, + &prism2_registers_proc_fops, local); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + hostap_init_ap_proc(local); + return 0; + } + + return -1; +} + + +static void prism2_free_local_data(struct net_device *dev) +{ + struct hostap_tx_callback_info *tx_cb, *tx_cb_prev; + int i; + struct hostap_interface *iface; + struct local_info *local; + struct list_head *ptr, *n; + + if (dev == NULL) + return; + + iface = netdev_priv(dev); + local = iface->local; + + /* Unregister all netdevs before freeing local data. */ + list_for_each_safe(ptr, n, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type == HOSTAP_INTERFACE_MASTER) { + /* special handling for this interface below */ + continue; + } + hostap_remove_interface(iface->dev, 0, 1); + } + + unregister_netdev(local->dev); + + flush_work(&local->reset_queue); + flush_work(&local->set_multicast_list_queue); + flush_work(&local->set_tim_queue); +#ifndef PRISM2_NO_STATION_MODES + flush_work(&local->info_queue); +#endif + flush_work(&local->comms_qual_update); + + lib80211_crypt_info_free(&local->crypt_info); + + if (timer_pending(&local->passive_scan_timer)) + del_timer(&local->passive_scan_timer); + + if (timer_pending(&local->tick_timer)) + del_timer(&local->tick_timer); + + prism2_clear_cmd_queue(local); + + skb_queue_purge(&local->info_list); + skb_queue_purge(&local->rx_list); + skb_queue_purge(&local->sta_tx_exc_list); + + if (local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_DISABLE); + + if (local->ap != NULL) + hostap_free_data(local->ap); + +#ifndef PRISM2_NO_PROCFS_DEBUG + if (local->proc != NULL) + remove_proc_entry("registers", local->proc); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + hostap_remove_proc(local); + + tx_cb = local->tx_callback; + while (tx_cb != NULL) { + tx_cb_prev = tx_cb; + tx_cb = tx_cb->next; + kfree(tx_cb_prev); + } + + hostap_set_hostapd(local, 0, 0); + hostap_set_hostapd_sta(local, 0, 0); + + for (i = 0; i < PRISM2_FRAG_CACHE_LEN; i++) { + if (local->frag_cache[i].skb != NULL) + dev_kfree_skb(local->frag_cache[i].skb); + } + +#ifdef PRISM2_DOWNLOAD_SUPPORT + prism2_download_free_data(local->dl_pri); + prism2_download_free_data(local->dl_sec); +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + prism2_clear_set_tim_queue(local); + + list_for_each_safe(ptr, n, &local->bss_list) { + struct hostap_bss_info *bss = + list_entry(ptr, struct hostap_bss_info, list); + kfree(bss); + } + + kfree(local->pda); + kfree(local->last_scan_results); + kfree(local->generic_elem); + + free_netdev(local->dev); +} + + +#if (defined(PRISM2_PCI) && defined(CONFIG_PM)) || defined(PRISM2_PCCARD) +static void prism2_suspend(struct net_device *dev) +{ + struct hostap_interface *iface; + struct local_info *local; + union iwreq_data wrqu; + + iface = netdev_priv(dev); + local = iface->local; + + /* Send disconnect event, e.g., to trigger reassociation after resume + * if wpa_supplicant is used. */ + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); + + /* Disable hardware and firmware */ + prism2_hw_shutdown(dev, 0); +} +#endif /* (PRISM2_PCI && CONFIG_PM) || PRISM2_PCCARD */ + + +/* These might at some point be compiled separately and used as separate + * kernel modules or linked into one */ +#ifdef PRISM2_DOWNLOAD_SUPPORT +#include "hostap_download.c" +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + +#ifdef PRISM2_CALLBACK +/* External hostap_callback.c file can be used to, e.g., blink activity led. + * This can use platform specific code and must define prism2_callback() + * function (if PRISM2_CALLBACK is not defined, these function calls are not + * used. */ +#include "hostap_callback.c" +#endif /* PRISM2_CALLBACK */ diff --git a/drivers/net/wireless/intersil/hostap/hostap_info.c b/drivers/net/wireless/intersil/hostap/hostap_info.c new file mode 100644 index 000000000..7635ac4f6 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_info.c @@ -0,0 +1,507 @@ +/* Host AP driver Info Frame processing (part of hostap.o module) */ + +#include <linux/if_arp.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <linux/etherdevice.h> +#include "hostap_wlan.h" +#include "hostap.h" +#include "hostap_ap.h" + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_commtallies16(local_info_t *local, unsigned char *buf, + int left) +{ + struct hfa384x_comm_tallies *tallies; + + if (left < sizeof(struct hfa384x_comm_tallies)) { + printk(KERN_DEBUG "%s: too short (len=%d) commtallies " + "info frame\n", local->dev->name, left); + return; + } + + tallies = (struct hfa384x_comm_tallies *) buf; +#define ADD_COMM_TALLIES(name) \ +local->comm_tallies.name += le16_to_cpu(tallies->name) + ADD_COMM_TALLIES(tx_unicast_frames); + ADD_COMM_TALLIES(tx_multicast_frames); + ADD_COMM_TALLIES(tx_fragments); + ADD_COMM_TALLIES(tx_unicast_octets); + ADD_COMM_TALLIES(tx_multicast_octets); + ADD_COMM_TALLIES(tx_deferred_transmissions); + ADD_COMM_TALLIES(tx_single_retry_frames); + ADD_COMM_TALLIES(tx_multiple_retry_frames); + ADD_COMM_TALLIES(tx_retry_limit_exceeded); + ADD_COMM_TALLIES(tx_discards); + ADD_COMM_TALLIES(rx_unicast_frames); + ADD_COMM_TALLIES(rx_multicast_frames); + ADD_COMM_TALLIES(rx_fragments); + ADD_COMM_TALLIES(rx_unicast_octets); + ADD_COMM_TALLIES(rx_multicast_octets); + ADD_COMM_TALLIES(rx_fcs_errors); + ADD_COMM_TALLIES(rx_discards_no_buffer); + ADD_COMM_TALLIES(tx_discards_wrong_sa); + ADD_COMM_TALLIES(rx_discards_wep_undecryptable); + ADD_COMM_TALLIES(rx_message_in_msg_fragments); + ADD_COMM_TALLIES(rx_message_in_bad_msg_fragments); +#undef ADD_COMM_TALLIES +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_commtallies32(local_info_t *local, unsigned char *buf, + int left) +{ + struct hfa384x_comm_tallies32 *tallies; + + if (left < sizeof(struct hfa384x_comm_tallies32)) { + printk(KERN_DEBUG "%s: too short (len=%d) commtallies32 " + "info frame\n", local->dev->name, left); + return; + } + + tallies = (struct hfa384x_comm_tallies32 *) buf; +#define ADD_COMM_TALLIES(name) \ +local->comm_tallies.name += le32_to_cpu(tallies->name) + ADD_COMM_TALLIES(tx_unicast_frames); + ADD_COMM_TALLIES(tx_multicast_frames); + ADD_COMM_TALLIES(tx_fragments); + ADD_COMM_TALLIES(tx_unicast_octets); + ADD_COMM_TALLIES(tx_multicast_octets); + ADD_COMM_TALLIES(tx_deferred_transmissions); + ADD_COMM_TALLIES(tx_single_retry_frames); + ADD_COMM_TALLIES(tx_multiple_retry_frames); + ADD_COMM_TALLIES(tx_retry_limit_exceeded); + ADD_COMM_TALLIES(tx_discards); + ADD_COMM_TALLIES(rx_unicast_frames); + ADD_COMM_TALLIES(rx_multicast_frames); + ADD_COMM_TALLIES(rx_fragments); + ADD_COMM_TALLIES(rx_unicast_octets); + ADD_COMM_TALLIES(rx_multicast_octets); + ADD_COMM_TALLIES(rx_fcs_errors); + ADD_COMM_TALLIES(rx_discards_no_buffer); + ADD_COMM_TALLIES(tx_discards_wrong_sa); + ADD_COMM_TALLIES(rx_discards_wep_undecryptable); + ADD_COMM_TALLIES(rx_message_in_msg_fragments); + ADD_COMM_TALLIES(rx_message_in_bad_msg_fragments); +#undef ADD_COMM_TALLIES +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_commtallies(local_info_t *local, unsigned char *buf, + int left) +{ + if (local->tallies32) + prism2_info_commtallies32(local, buf, left); + else + prism2_info_commtallies16(local, buf, left); +} + + +#ifndef PRISM2_NO_STATION_MODES +#ifndef PRISM2_NO_DEBUG +static const char* hfa384x_linkstatus_str(u16 linkstatus) +{ + switch (linkstatus) { + case HFA384X_LINKSTATUS_CONNECTED: + return "Connected"; + case HFA384X_LINKSTATUS_DISCONNECTED: + return "Disconnected"; + case HFA384X_LINKSTATUS_AP_CHANGE: + return "Access point change"; + case HFA384X_LINKSTATUS_AP_OUT_OF_RANGE: + return "Access point out of range"; + case HFA384X_LINKSTATUS_AP_IN_RANGE: + return "Access point in range"; + case HFA384X_LINKSTATUS_ASSOC_FAILED: + return "Association failed"; + default: + return "Unknown"; + } +} +#endif /* PRISM2_NO_DEBUG */ + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_linkstatus(local_info_t *local, unsigned char *buf, + int left) +{ + u16 val; + int non_sta_mode; + + /* Alloc new JoinRequests to occur since LinkStatus for the previous + * has been received */ + local->last_join_time = 0; + + if (left != 2) { + printk(KERN_DEBUG "%s: invalid linkstatus info frame " + "length %d\n", local->dev->name, left); + return; + } + + non_sta_mode = local->iw_mode == IW_MODE_MASTER || + local->iw_mode == IW_MODE_REPEAT || + local->iw_mode == IW_MODE_MONITOR; + + val = buf[0] | (buf[1] << 8); + if (!non_sta_mode || val != HFA384X_LINKSTATUS_DISCONNECTED) { + PDEBUG(DEBUG_EXTRA, "%s: LinkStatus=%d (%s)\n", + local->dev->name, val, hfa384x_linkstatus_str(val)); + } + + if (non_sta_mode) { + netif_carrier_on(local->dev); + netif_carrier_on(local->ddev); + return; + } + + /* Get current BSSID later in scheduled task */ + set_bit(PRISM2_INFO_PENDING_LINKSTATUS, &local->pending_info); + local->prev_link_status = val; + schedule_work(&local->info_queue); +} + + +static void prism2_host_roaming(local_info_t *local) +{ + struct hfa384x_join_request req; + struct net_device *dev = local->dev; + struct hfa384x_hostscan_result *selected, *entry; + int i; + unsigned long flags; + + if (local->last_join_time && + time_before(jiffies, local->last_join_time + 10 * HZ)) { + PDEBUG(DEBUG_EXTRA, "%s: last join request has not yet been " + "completed - waiting for it before issuing new one\n", + dev->name); + return; + } + + /* ScanResults are sorted: first ESS results in decreasing signal + * quality then IBSS results in similar order. + * Trivial roaming policy: just select the first entry. + * This could probably be improved by adding hysteresis to limit + * number of handoffs, etc. + * + * Could do periodic RID_SCANREQUEST or Inquire F101 to get new + * ScanResults */ + spin_lock_irqsave(&local->lock, flags); + if (local->last_scan_results == NULL || + local->last_scan_results_count == 0) { + spin_unlock_irqrestore(&local->lock, flags); + PDEBUG(DEBUG_EXTRA, "%s: no scan results for host roaming\n", + dev->name); + return; + } + + selected = &local->last_scan_results[0]; + + if (local->preferred_ap[0] || local->preferred_ap[1] || + local->preferred_ap[2] || local->preferred_ap[3] || + local->preferred_ap[4] || local->preferred_ap[5]) { + /* Try to find preferred AP */ + PDEBUG(DEBUG_EXTRA, "%s: Preferred AP BSSID %pM\n", + dev->name, local->preferred_ap); + for (i = 0; i < local->last_scan_results_count; i++) { + entry = &local->last_scan_results[i]; + if (memcmp(local->preferred_ap, entry->bssid, 6) == 0) + { + PDEBUG(DEBUG_EXTRA, "%s: using preferred AP " + "selection\n", dev->name); + selected = entry; + break; + } + } + } + + memcpy(req.bssid, selected->bssid, ETH_ALEN); + req.channel = selected->chid; + spin_unlock_irqrestore(&local->lock, flags); + + PDEBUG(DEBUG_EXTRA, "%s: JoinRequest: BSSID=%pM" + " channel=%d\n", + dev->name, req.bssid, le16_to_cpu(req.channel)); + if (local->func->set_rid(dev, HFA384X_RID_JOINREQUEST, &req, + sizeof(req))) { + printk(KERN_DEBUG "%s: JoinRequest failed\n", dev->name); + } + local->last_join_time = jiffies; +} + + +static void hostap_report_scan_complete(local_info_t *local) +{ + union iwreq_data wrqu; + + /* Inform user space about new scan results (just empty event, + * SIOCGIWSCAN can be used to fetch data */ + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(local->dev, SIOCGIWSCAN, &wrqu, NULL); + + /* Allow SIOCGIWSCAN handling to occur since we have received + * scanning result */ + local->scan_timestamp = 0; +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_scanresults(local_info_t *local, unsigned char *buf, + int left) +{ + u16 *pos; + int new_count, i; + unsigned long flags; + struct hfa384x_scan_result *res; + struct hfa384x_hostscan_result *results, *prev; + + if (left < 4) { + printk(KERN_DEBUG "%s: invalid scanresult info frame " + "length %d\n", local->dev->name, left); + return; + } + + pos = (u16 *) buf; + pos++; + pos++; + left -= 4; + + new_count = left / sizeof(struct hfa384x_scan_result); + results = kmalloc(new_count * sizeof(struct hfa384x_hostscan_result), + GFP_ATOMIC); + if (results == NULL) + return; + + /* Convert to hostscan result format. */ + res = (struct hfa384x_scan_result *) pos; + for (i = 0; i < new_count; i++) { + memcpy(&results[i], &res[i], + sizeof(struct hfa384x_scan_result)); + results[i].atim = 0; + } + + spin_lock_irqsave(&local->lock, flags); + local->last_scan_type = PRISM2_SCAN; + prev = local->last_scan_results; + local->last_scan_results = results; + local->last_scan_results_count = new_count; + spin_unlock_irqrestore(&local->lock, flags); + kfree(prev); + + hostap_report_scan_complete(local); + + /* Perform rest of ScanResults handling later in scheduled task */ + set_bit(PRISM2_INFO_PENDING_SCANRESULTS, &local->pending_info); + schedule_work(&local->info_queue); +} + + +/* Called only as a tasklet (software IRQ) */ +static void prism2_info_hostscanresults(local_info_t *local, + unsigned char *buf, int left) +{ + int i, result_size, copy_len, new_count; + struct hfa384x_hostscan_result *results, *prev; + unsigned long flags; + __le16 *pos; + u8 *ptr; + + wake_up_interruptible(&local->hostscan_wq); + + if (left < 4) { + printk(KERN_DEBUG "%s: invalid hostscanresult info frame " + "length %d\n", local->dev->name, left); + return; + } + + pos = (__le16 *) buf; + copy_len = result_size = le16_to_cpu(*pos); + if (result_size == 0) { + printk(KERN_DEBUG "%s: invalid result_size (0) in " + "hostscanresults\n", local->dev->name); + return; + } + if (copy_len > sizeof(struct hfa384x_hostscan_result)) + copy_len = sizeof(struct hfa384x_hostscan_result); + + pos++; + pos++; + left -= 4; + ptr = (u8 *) pos; + + new_count = left / result_size; + results = kcalloc(new_count, sizeof(struct hfa384x_hostscan_result), + GFP_ATOMIC); + if (results == NULL) + return; + + for (i = 0; i < new_count; i++) { + memcpy(&results[i], ptr, copy_len); + ptr += result_size; + left -= result_size; + } + + if (left) { + printk(KERN_DEBUG "%s: short HostScan result entry (%d/%d)\n", + local->dev->name, left, result_size); + } + + spin_lock_irqsave(&local->lock, flags); + local->last_scan_type = PRISM2_HOSTSCAN; + prev = local->last_scan_results; + local->last_scan_results = results; + local->last_scan_results_count = new_count; + spin_unlock_irqrestore(&local->lock, flags); + kfree(prev); + + hostap_report_scan_complete(local); +} +#endif /* PRISM2_NO_STATION_MODES */ + + +/* Called only as a tasklet (software IRQ) */ +void hostap_info_process(local_info_t *local, struct sk_buff *skb) +{ + struct hfa384x_info_frame *info; + unsigned char *buf; + int left; +#ifndef PRISM2_NO_DEBUG + int i; +#endif /* PRISM2_NO_DEBUG */ + + info = (struct hfa384x_info_frame *) skb->data; + buf = skb->data + sizeof(*info); + left = skb->len - sizeof(*info); + + switch (le16_to_cpu(info->type)) { + case HFA384X_INFO_COMMTALLIES: + prism2_info_commtallies(local, buf, left); + break; + +#ifndef PRISM2_NO_STATION_MODES + case HFA384X_INFO_LINKSTATUS: + prism2_info_linkstatus(local, buf, left); + break; + + case HFA384X_INFO_SCANRESULTS: + prism2_info_scanresults(local, buf, left); + break; + + case HFA384X_INFO_HOSTSCANRESULTS: + prism2_info_hostscanresults(local, buf, left); + break; +#endif /* PRISM2_NO_STATION_MODES */ + +#ifndef PRISM2_NO_DEBUG + default: + PDEBUG(DEBUG_EXTRA, "%s: INFO - len=%d type=0x%04x\n", + local->dev->name, le16_to_cpu(info->len), + le16_to_cpu(info->type)); + PDEBUG(DEBUG_EXTRA, "Unknown info frame:"); + for (i = 0; i < (left < 100 ? left : 100); i++) + PDEBUG2(DEBUG_EXTRA, " %02x", buf[i]); + PDEBUG2(DEBUG_EXTRA, "\n"); + break; +#endif /* PRISM2_NO_DEBUG */ + } +} + + +#ifndef PRISM2_NO_STATION_MODES +static void handle_info_queue_linkstatus(local_info_t *local) +{ + int val = local->prev_link_status; + int connected; + union iwreq_data wrqu; + + connected = + val == HFA384X_LINKSTATUS_CONNECTED || + val == HFA384X_LINKSTATUS_AP_CHANGE || + val == HFA384X_LINKSTATUS_AP_IN_RANGE; + + if (local->func->get_rid(local->dev, HFA384X_RID_CURRENTBSSID, + local->bssid, ETH_ALEN, 1) < 0) { + printk(KERN_DEBUG "%s: could not read CURRENTBSSID after " + "LinkStatus event\n", local->dev->name); + } else { + PDEBUG(DEBUG_EXTRA, "%s: LinkStatus: BSSID=%pM\n", + local->dev->name, + (unsigned char *) local->bssid); + if (local->wds_type & HOSTAP_WDS_AP_CLIENT) + hostap_add_sta(local->ap, local->bssid); + } + + /* Get BSSID if we have a valid AP address */ + if (connected) { + netif_carrier_on(local->dev); + netif_carrier_on(local->ddev); + memcpy(wrqu.ap_addr.sa_data, local->bssid, ETH_ALEN); + } else { + netif_carrier_off(local->dev); + netif_carrier_off(local->ddev); + eth_zero_addr(wrqu.ap_addr.sa_data); + } + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + + /* + * Filter out sequential disconnect events in order not to cause a + * flood of SIOCGIWAP events that have a race condition with EAPOL + * frames and can confuse wpa_supplicant about the current association + * status. + */ + if (connected || local->prev_linkstatus_connected) + wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); + local->prev_linkstatus_connected = connected; +} + + +static void handle_info_queue_scanresults(local_info_t *local) +{ + if (local->host_roaming == 1 && local->iw_mode == IW_MODE_INFRA) + prism2_host_roaming(local); + + if (local->host_roaming == 2 && local->iw_mode == IW_MODE_INFRA && + !is_zero_ether_addr(local->preferred_ap)) { + /* + * Firmware seems to be getting into odd state in host_roaming + * mode 2 when hostscan is used without join command, so try + * to fix this by re-joining the current AP. This does not + * actually trigger a new association if the current AP is + * still in the scan results. + */ + prism2_host_roaming(local); + } +} + + +/* Called only as scheduled task after receiving info frames (used to avoid + * pending too much time in HW IRQ handler). */ +static void handle_info_queue(struct work_struct *work) +{ + local_info_t *local = container_of(work, local_info_t, info_queue); + + if (test_and_clear_bit(PRISM2_INFO_PENDING_LINKSTATUS, + &local->pending_info)) + handle_info_queue_linkstatus(local); + + if (test_and_clear_bit(PRISM2_INFO_PENDING_SCANRESULTS, + &local->pending_info)) + handle_info_queue_scanresults(local); +} +#endif /* PRISM2_NO_STATION_MODES */ + + +void hostap_info_init(local_info_t *local) +{ + skb_queue_head_init(&local->info_list); +#ifndef PRISM2_NO_STATION_MODES + INIT_WORK(&local->info_queue, handle_info_queue); +#endif /* PRISM2_NO_STATION_MODES */ +} + + +EXPORT_SYMBOL(hostap_info_init); +EXPORT_SYMBOL(hostap_info_process); diff --git a/drivers/net/wireless/intersil/hostap/hostap_ioctl.c b/drivers/net/wireless/intersil/hostap/hostap_ioctl.c new file mode 100644 index 000000000..3e5fa7872 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_ioctl.c @@ -0,0 +1,4054 @@ +/* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */ + +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/ethtool.h> +#include <linux/if_arp.h> +#include <linux/module.h> +#include <linux/etherdevice.h> +#include <net/lib80211.h> + +#include "hostap_wlan.h" +#include "hostap.h" +#include "hostap_ap.h" + +static struct iw_statistics *hostap_get_wireless_stats(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct iw_statistics *wstats; + + iface = netdev_priv(dev); + local = iface->local; + + /* Why are we doing that ? Jean II */ + if (iface->type != HOSTAP_INTERFACE_MAIN) + return NULL; + + wstats = &local->wstats; + + wstats->status = 0; + wstats->discard.code = + local->comm_tallies.rx_discards_wep_undecryptable; + wstats->discard.misc = + local->comm_tallies.rx_fcs_errors + + local->comm_tallies.rx_discards_no_buffer + + local->comm_tallies.tx_discards_wrong_sa; + + wstats->discard.retries = + local->comm_tallies.tx_retry_limit_exceeded; + wstats->discard.fragment = + local->comm_tallies.rx_message_in_bad_msg_fragments; + + if (local->iw_mode != IW_MODE_MASTER && + local->iw_mode != IW_MODE_REPEAT) { + int update = 1; +#ifdef in_atomic + /* RID reading might sleep and it must not be called in + * interrupt context or while atomic. However, this + * function seems to be called while atomic (at least in Linux + * 2.5.59). Update signal quality values only if in suitable + * context. Otherwise, previous values read from tick timer + * will be used. */ + if (in_atomic()) + update = 0; +#endif /* in_atomic */ + + if (update && prism2_update_comms_qual(dev) == 0) + wstats->qual.updated = IW_QUAL_ALL_UPDATED | + IW_QUAL_DBM; + + wstats->qual.qual = local->comms_qual; + wstats->qual.level = local->avg_signal; + wstats->qual.noise = local->avg_noise; + } else { + wstats->qual.qual = 0; + wstats->qual.level = 0; + wstats->qual.noise = 0; + wstats->qual.updated = IW_QUAL_ALL_INVALID; + } + + return wstats; +} + + +static int prism2_get_datarates(struct net_device *dev, u8 *rates) +{ + struct hostap_interface *iface; + local_info_t *local; + u8 buf[12]; + int len; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + len = local->func->get_rid(dev, HFA384X_RID_SUPPORTEDDATARATES, buf, + sizeof(buf), 0); + if (len < 2) + return 0; + + val = le16_to_cpu(*(__le16 *) buf); /* string length */ + + if (len - 2 < val || val > 10) + return 0; + + memcpy(rates, buf + 2, val); + return val; +} + + +static int prism2_get_name(struct net_device *dev, + struct iw_request_info *info, + char *name, char *extra) +{ + u8 rates[10]; + int len, i, over2 = 0; + + len = prism2_get_datarates(dev, rates); + + for (i = 0; i < len; i++) { + if (rates[i] == 0x0b || rates[i] == 0x16) { + over2 = 1; + break; + } + } + + strcpy(name, over2 ? "IEEE 802.11b" : "IEEE 802.11-DS"); + + return 0; +} + + +static int prism2_ioctl_siwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *keybuf) +{ + struct hostap_interface *iface; + local_info_t *local; + int i; + struct lib80211_crypt_data **crypt; + + iface = netdev_priv(dev); + local = iface->local; + + i = erq->flags & IW_ENCODE_INDEX; + if (i < 1 || i > 4) + i = local->crypt_info.tx_keyidx; + else + i--; + if (i < 0 || i >= WEP_KEYS) + return -EINVAL; + + crypt = &local->crypt_info.crypt[i]; + + if (erq->flags & IW_ENCODE_DISABLED) { + if (*crypt) + lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); + goto done; + } + + if (*crypt != NULL && (*crypt)->ops != NULL && + strcmp((*crypt)->ops->name, "WEP") != 0) { + /* changing to use WEP; deinit previously used algorithm */ + lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); + } + + if (*crypt == NULL) { + struct lib80211_crypt_data *new_crypt; + + /* take WEP into use */ + new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), + GFP_KERNEL); + if (new_crypt == NULL) + return -ENOMEM; + new_crypt->ops = lib80211_get_crypto_ops("WEP"); + if (!new_crypt->ops) { + request_module("lib80211_crypt_wep"); + new_crypt->ops = lib80211_get_crypto_ops("WEP"); + } + if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + new_crypt->priv = new_crypt->ops->init(i); + if (!new_crypt->ops || !new_crypt->priv) { + kfree(new_crypt); + new_crypt = NULL; + + printk(KERN_WARNING "%s: could not initialize WEP: " + "load module hostap_crypt_wep.o\n", + dev->name); + return -EOPNOTSUPP; + } + *crypt = new_crypt; + } + + if (erq->length > 0) { + int len = erq->length <= 5 ? 5 : 13; + int first = 1, j; + if (len > erq->length) + memset(keybuf + erq->length, 0, len - erq->length); + (*crypt)->ops->set_key(keybuf, len, NULL, (*crypt)->priv); + for (j = 0; j < WEP_KEYS; j++) { + if (j != i && local->crypt_info.crypt[j]) { + first = 0; + break; + } + } + if (first) + local->crypt_info.tx_keyidx = i; + } else { + /* No key data - just set the default TX key index */ + local->crypt_info.tx_keyidx = i; + } + + done: + local->open_wep = erq->flags & IW_ENCODE_OPEN; + + if (hostap_set_encryption(local)) { + printk(KERN_DEBUG "%s: set_encryption failed\n", dev->name); + return -EINVAL; + } + + /* Do not reset port0 if card is in Managed mode since resetting will + * generate new IEEE 802.11 authentication which may end up in looping + * with IEEE 802.1X. Prism2 documentation seem to require port reset + * after WEP configuration. However, keys are apparently changed at + * least in Managed mode. */ + if (local->iw_mode != IW_MODE_INFRA && local->func->reset_port(dev)) { + printk(KERN_DEBUG "%s: reset_port failed\n", dev->name); + return -EINVAL; + } + + return 0; +} + + +static int prism2_ioctl_giwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *key) +{ + struct hostap_interface *iface; + local_info_t *local; + int i, len; + u16 val; + struct lib80211_crypt_data *crypt; + + iface = netdev_priv(dev); + local = iface->local; + + i = erq->flags & IW_ENCODE_INDEX; + if (i < 1 || i > 4) + i = local->crypt_info.tx_keyidx; + else + i--; + if (i < 0 || i >= WEP_KEYS) + return -EINVAL; + + crypt = local->crypt_info.crypt[i]; + erq->flags = i + 1; + + if (crypt == NULL || crypt->ops == NULL) { + erq->length = 0; + erq->flags |= IW_ENCODE_DISABLED; + return 0; + } + + if (strcmp(crypt->ops->name, "WEP") != 0) { + /* only WEP is supported with wireless extensions, so just + * report that encryption is used */ + erq->length = 0; + erq->flags |= IW_ENCODE_ENABLED; + return 0; + } + + /* Reads from HFA384X_RID_CNFDEFAULTKEY* return bogus values, so show + * the keys from driver buffer */ + len = crypt->ops->get_key(key, WEP_KEY_LEN, NULL, crypt->priv); + erq->length = (len >= 0 ? len : 0); + + if (local->func->get_rid(dev, HFA384X_RID_CNFWEPFLAGS, &val, 2, 1) < 0) + { + printk("CNFWEPFLAGS reading failed\n"); + return -EOPNOTSUPP; + } + le16_to_cpus(&val); + if (val & HFA384X_WEPFLAGS_PRIVACYINVOKED) + erq->flags |= IW_ENCODE_ENABLED; + else + erq->flags |= IW_ENCODE_DISABLED; + if (val & HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED) + erq->flags |= IW_ENCODE_RESTRICTED; + else + erq->flags |= IW_ENCODE_OPEN; + + return 0; +} + + +static int hostap_set_rate(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret, basic_rates; + + iface = netdev_priv(dev); + local = iface->local; + + basic_rates = local->basic_rates & local->tx_rate_control; + if (!basic_rates || basic_rates != local->basic_rates) { + printk(KERN_INFO "%s: updating basic rate set automatically " + "to match with the new supported rate set\n", + dev->name); + if (!basic_rates) + basic_rates = local->tx_rate_control; + + local->basic_rates = basic_rates; + if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, + basic_rates)) + printk(KERN_WARNING "%s: failed to set " + "cnfBasicRates\n", dev->name); + } + + ret = (hostap_set_word(dev, HFA384X_RID_TXRATECONTROL, + local->tx_rate_control) || + hostap_set_word(dev, HFA384X_RID_CNFSUPPORTEDRATES, + local->tx_rate_control) || + local->func->reset_port(dev)); + + if (ret) { + printk(KERN_WARNING "%s: TXRateControl/cnfSupportedRates " + "setting to 0x%x failed\n", + dev->name, local->tx_rate_control); + } + + /* Update TX rate configuration for all STAs based on new operational + * rate set. */ + hostap_update_rates(local); + + return ret; +} + + +static int prism2_ioctl_siwrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (rrq->fixed) { + switch (rrq->value) { + case 11000000: + local->tx_rate_control = HFA384X_RATES_11MBPS; + break; + case 5500000: + local->tx_rate_control = HFA384X_RATES_5MBPS; + break; + case 2000000: + local->tx_rate_control = HFA384X_RATES_2MBPS; + break; + case 1000000: + local->tx_rate_control = HFA384X_RATES_1MBPS; + break; + default: + local->tx_rate_control = HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | + HFA384X_RATES_11MBPS; + break; + } + } else { + switch (rrq->value) { + case 11000000: + local->tx_rate_control = HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | + HFA384X_RATES_11MBPS; + break; + case 5500000: + local->tx_rate_control = HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS; + break; + case 2000000: + local->tx_rate_control = HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS; + break; + case 1000000: + local->tx_rate_control = HFA384X_RATES_1MBPS; + break; + default: + local->tx_rate_control = HFA384X_RATES_1MBPS | + HFA384X_RATES_2MBPS | HFA384X_RATES_5MBPS | + HFA384X_RATES_11MBPS; + break; + } + } + + return hostap_set_rate(dev); +} + + +static int prism2_ioctl_giwrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + u16 val; + struct hostap_interface *iface; + local_info_t *local; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_TXRATECONTROL, &val, 2, 1) < + 0) + return -EINVAL; + + if ((val & 0x1) && (val > 1)) + rrq->fixed = 0; + else + rrq->fixed = 1; + + if (local->iw_mode == IW_MODE_MASTER && local->ap != NULL && + !local->fw_tx_rate_control) { + /* HFA384X_RID_CURRENTTXRATE seems to always be 2 Mbps in + * Host AP mode, so use the recorded TX rate of the last sent + * frame */ + rrq->value = local->ap->last_tx_rate > 0 ? + local->ap->last_tx_rate * 100000 : 11000000; + return 0; + } + + if (local->func->get_rid(dev, HFA384X_RID_CURRENTTXRATE, &val, 2, 1) < + 0) + return -EINVAL; + + switch (val) { + case HFA384X_RATES_1MBPS: + rrq->value = 1000000; + break; + case HFA384X_RATES_2MBPS: + rrq->value = 2000000; + break; + case HFA384X_RATES_5MBPS: + rrq->value = 5500000; + break; + case HFA384X_RATES_11MBPS: + rrq->value = 11000000; + break; + default: + /* should not happen */ + rrq->value = 11000000; + ret = -EINVAL; + break; + } + + return ret; +} + + +static int prism2_ioctl_siwsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *sens, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + /* Set the desired AP density */ + if (sens->value < 1 || sens->value > 3) + return -EINVAL; + + if (hostap_set_word(dev, HFA384X_RID_CNFSYSTEMSCALE, sens->value) || + local->func->reset_port(dev)) + return -EINVAL; + + return 0; +} + +static int prism2_ioctl_giwsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *sens, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + __le16 val; + + iface = netdev_priv(dev); + local = iface->local; + + /* Get the current AP density */ + if (local->func->get_rid(dev, HFA384X_RID_CNFSYSTEMSCALE, &val, 2, 1) < + 0) + return -EINVAL; + + sens->value = le16_to_cpu(val); + sens->fixed = 1; + + return 0; +} + + +/* Deprecated in new wireless extension API */ +static int prism2_ioctl_giwaplist(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + struct sockaddr *addr; + struct iw_quality *qual; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->iw_mode != IW_MODE_MASTER) { + printk(KERN_DEBUG "SIOCGIWAPLIST is currently only supported " + "in Host AP mode\n"); + data->length = 0; + return -EOPNOTSUPP; + } + + addr = kmalloc(sizeof(struct sockaddr) * IW_MAX_AP, GFP_KERNEL); + qual = kmalloc(sizeof(struct iw_quality) * IW_MAX_AP, GFP_KERNEL); + if (addr == NULL || qual == NULL) { + kfree(addr); + kfree(qual); + data->length = 0; + return -ENOMEM; + } + + data->length = prism2_ap_get_sta_qual(local, addr, qual, IW_MAX_AP, 1); + + memcpy(extra, addr, sizeof(struct sockaddr) * data->length); + data->flags = 1; /* has quality information */ + memcpy(extra + sizeof(struct sockaddr) * data->length, qual, + sizeof(struct iw_quality) * data->length); + + kfree(addr); + kfree(qual); + return 0; +} + + +static int prism2_ioctl_siwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + __le16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (rts->disabled) + val = cpu_to_le16(2347); + else if (rts->value < 0 || rts->value > 2347) + return -EINVAL; + else + val = cpu_to_le16(rts->value); + + if (local->func->set_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2) || + local->func->reset_port(dev)) + return -EINVAL; + + local->rts_threshold = rts->value; + + return 0; +} + +static int prism2_ioctl_giwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + __le16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_RTSTHRESHOLD, &val, 2, 1) < + 0) + return -EINVAL; + + rts->value = le16_to_cpu(val); + rts->disabled = (rts->value == 2347); + rts->fixed = 1; + + return 0; +} + + +static int prism2_ioctl_siwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + __le16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (rts->disabled) + val = cpu_to_le16(2346); + else if (rts->value < 256 || rts->value > 2346) + return -EINVAL; + else + val = cpu_to_le16(rts->value & ~0x1); /* even numbers only */ + + local->fragm_threshold = rts->value & ~0x1; + if (local->func->set_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, &val, + 2) + || local->func->reset_port(dev)) + return -EINVAL; + + return 0; +} + +static int prism2_ioctl_giwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + __le16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_FRAGMENTATIONTHRESHOLD, + &val, 2, 1) < 0) + return -EINVAL; + + rts->value = le16_to_cpu(val); + rts->disabled = (rts->value == 2346); + rts->fixed = 1; + + return 0; +} + + +#ifndef PRISM2_NO_STATION_MODES +static int hostap_join_ap(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_join_request req; + unsigned long flags; + int i; + struct hfa384x_hostscan_result *entry; + + iface = netdev_priv(dev); + local = iface->local; + + memcpy(req.bssid, local->preferred_ap, ETH_ALEN); + req.channel = 0; + + spin_lock_irqsave(&local->lock, flags); + for (i = 0; i < local->last_scan_results_count; i++) { + if (!local->last_scan_results) + break; + entry = &local->last_scan_results[i]; + if (ether_addr_equal(local->preferred_ap, entry->bssid)) { + req.channel = entry->chid; + break; + } + } + spin_unlock_irqrestore(&local->lock, flags); + + if (local->func->set_rid(dev, HFA384X_RID_JOINREQUEST, &req, + sizeof(req))) { + printk(KERN_DEBUG "%s: JoinRequest %pM failed\n", + dev->name, local->preferred_ap); + return -1; + } + + printk(KERN_DEBUG "%s: Trying to join BSSID %pM\n", + dev->name, local->preferred_ap); + + return 0; +} +#endif /* PRISM2_NO_STATION_MODES */ + + +static int prism2_ioctl_siwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ +#ifdef PRISM2_NO_STATION_MODES + return -EOPNOTSUPP; +#else /* PRISM2_NO_STATION_MODES */ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + memcpy(local->preferred_ap, &ap_addr->sa_data, ETH_ALEN); + + if (local->host_roaming == 1 && local->iw_mode == IW_MODE_INFRA) { + struct hfa384x_scan_request scan_req; + memset(&scan_req, 0, sizeof(scan_req)); + scan_req.channel_list = cpu_to_le16(0x3fff); + scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); + if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST, + &scan_req, sizeof(scan_req))) { + printk(KERN_DEBUG "%s: ScanResults request failed - " + "preferred AP delayed to next unsolicited " + "scan\n", dev->name); + } + } else if (local->host_roaming == 2 && + local->iw_mode == IW_MODE_INFRA) { + if (hostap_join_ap(dev)) + return -EINVAL; + } else { + printk(KERN_DEBUG "%s: Preferred AP (SIOCSIWAP) is used only " + "in Managed mode when host_roaming is enabled\n", + dev->name); + } + + return 0; +#endif /* PRISM2_NO_STATION_MODES */ +} + +static int prism2_ioctl_giwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + ap_addr->sa_family = ARPHRD_ETHER; + switch (iface->type) { + case HOSTAP_INTERFACE_AP: + memcpy(&ap_addr->sa_data, dev->dev_addr, ETH_ALEN); + break; + case HOSTAP_INTERFACE_STA: + memcpy(&ap_addr->sa_data, local->assoc_ap_addr, ETH_ALEN); + break; + case HOSTAP_INTERFACE_WDS: + memcpy(&ap_addr->sa_data, iface->u.wds.remote_addr, ETH_ALEN); + break; + default: + if (local->func->get_rid(dev, HFA384X_RID_CURRENTBSSID, + &ap_addr->sa_data, ETH_ALEN, 1) < 0) + return -EOPNOTSUPP; + + /* local->bssid is also updated in LinkStatus handler when in + * station mode */ + memcpy(local->bssid, &ap_addr->sa_data, ETH_ALEN); + break; + } + + return 0; +} + + +static int prism2_ioctl_siwnickn(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *nickname) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + memset(local->name, 0, sizeof(local->name)); + memcpy(local->name, nickname, data->length); + local->name_set = 1; + + if (hostap_set_string(dev, HFA384X_RID_CNFOWNNAME, local->name) || + local->func->reset_port(dev)) + return -EINVAL; + + return 0; +} + +static int prism2_ioctl_giwnickn(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *nickname) +{ + struct hostap_interface *iface; + local_info_t *local; + int len; + char name[MAX_NAME_LEN + 3]; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + len = local->func->get_rid(dev, HFA384X_RID_CNFOWNNAME, + &name, MAX_NAME_LEN + 2, 0); + val = le16_to_cpu(*(__le16 *) name); + if (len > MAX_NAME_LEN + 2 || len < 0 || val > MAX_NAME_LEN) + return -EOPNOTSUPP; + + name[val + 2] = '\0'; + data->length = val + 1; + memcpy(nickname, name + 2, val + 1); + + return 0; +} + + +static int prism2_ioctl_siwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + /* freq => chan. */ + if (freq->e == 1 && + freq->m / 100000 >= freq_list[0] && + freq->m / 100000 <= freq_list[FREQ_COUNT - 1]) { + int ch; + int fr = freq->m / 100000; + for (ch = 0; ch < FREQ_COUNT; ch++) { + if (fr == freq_list[ch]) { + freq->e = 0; + freq->m = ch + 1; + break; + } + } + } + + if (freq->e != 0 || freq->m < 1 || freq->m > FREQ_COUNT || + !(local->channel_mask & (1 << (freq->m - 1)))) + return -EINVAL; + + local->channel = freq->m; /* channel is used in prism2_setup_rids() */ + if (hostap_set_word(dev, HFA384X_RID_CNFOWNCHANNEL, local->channel) || + local->func->reset_port(dev)) + return -EINVAL; + + return 0; +} + +static int prism2_ioctl_giwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_CURRENTCHANNEL, &val, 2, 1) < + 0) + return -EINVAL; + + le16_to_cpus(&val); + if (val < 1 || val > FREQ_COUNT) + return -EINVAL; + + freq->m = freq_list[val - 1] * 100000; + freq->e = 1; + + return 0; +} + + +static void hostap_monitor_set_type(local_info_t *local) +{ + struct net_device *dev = local->ddev; + + if (dev == NULL) + return; + + if (local->monitor_type == PRISM2_MONITOR_PRISM || + local->monitor_type == PRISM2_MONITOR_CAPHDR) { + dev->type = ARPHRD_IEEE80211_PRISM; + } else if (local->monitor_type == PRISM2_MONITOR_RADIOTAP) { + dev->type = ARPHRD_IEEE80211_RADIOTAP; + } else { + dev->type = ARPHRD_IEEE80211; + } +} + + +static int prism2_ioctl_siwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *ssid) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (iface->type == HOSTAP_INTERFACE_WDS) + return -EOPNOTSUPP; + + if (data->flags == 0) + ssid[0] = '\0'; /* ANY */ + + if (local->iw_mode == IW_MODE_MASTER && ssid[0] == '\0') { + /* Setting SSID to empty string seems to kill the card in + * Host AP mode */ + printk(KERN_DEBUG "%s: Host AP mode does not support " + "'Any' essid\n", dev->name); + return -EINVAL; + } + + memcpy(local->essid, ssid, data->length); + local->essid[data->length] = '\0'; + + if ((!local->fw_ap && + hostap_set_string(dev, HFA384X_RID_CNFDESIREDSSID, local->essid)) + || hostap_set_string(dev, HFA384X_RID_CNFOWNSSID, local->essid) || + local->func->reset_port(dev)) + return -EINVAL; + + return 0; +} + +static int prism2_ioctl_giwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *essid) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + if (iface->type == HOSTAP_INTERFACE_WDS) + return -EOPNOTSUPP; + + data->flags = 1; /* active */ + if (local->iw_mode == IW_MODE_MASTER) { + data->length = strlen(local->essid); + memcpy(essid, local->essid, IW_ESSID_MAX_SIZE); + } else { + int len; + char ssid[MAX_SSID_LEN + 2]; + memset(ssid, 0, sizeof(ssid)); + len = local->func->get_rid(dev, HFA384X_RID_CURRENTSSID, + &ssid, MAX_SSID_LEN + 2, 0); + val = le16_to_cpu(*(__le16 *) ssid); + if (len > MAX_SSID_LEN + 2 || len < 0 || val > MAX_SSID_LEN) { + return -EOPNOTSUPP; + } + data->length = val; + memcpy(essid, ssid + 2, IW_ESSID_MAX_SIZE); + } + + return 0; +} + + +static int prism2_ioctl_giwrange(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + struct iw_range *range = (struct iw_range *) extra; + u8 rates[10]; + u16 val; + int i, len, over2; + + iface = netdev_priv(dev); + local = iface->local; + + data->length = sizeof(struct iw_range); + memset(range, 0, sizeof(struct iw_range)); + + /* TODO: could fill num_txpower and txpower array with + * something; however, there are 128 different values.. */ + + range->txpower_capa = IW_TXPOW_DBM; + + if (local->iw_mode == IW_MODE_INFRA || local->iw_mode == IW_MODE_ADHOC) + { + range->min_pmp = 1 * 1024; + range->max_pmp = 65535 * 1024; + range->min_pmt = 1 * 1024; + range->max_pmt = 1000 * 1024; + range->pmp_flags = IW_POWER_PERIOD; + range->pmt_flags = IW_POWER_TIMEOUT; + range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | + IW_POWER_UNICAST_R | IW_POWER_ALL_R; + } + + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 18; + + range->retry_capa = IW_RETRY_LIMIT; + range->retry_flags = IW_RETRY_LIMIT; + range->min_retry = 0; + range->max_retry = 255; + + range->num_channels = FREQ_COUNT; + + val = 0; + for (i = 0; i < FREQ_COUNT; i++) { + if (local->channel_mask & (1 << i)) { + range->freq[val].i = i + 1; + range->freq[val].m = freq_list[i] * 100000; + range->freq[val].e = 1; + val++; + } + if (val == IW_MAX_FREQUENCIES) + break; + } + range->num_frequency = val; + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) { + range->max_qual.qual = 70; /* what is correct max? This was not + * documented exactly. At least + * 69 has been observed. */ + range->max_qual.level = 0; /* dB */ + range->max_qual.noise = 0; /* dB */ + + /* What would be suitable values for "average/typical" qual? */ + range->avg_qual.qual = 20; + range->avg_qual.level = -60; + range->avg_qual.noise = -95; + } else { + range->max_qual.qual = 92; /* 0 .. 92 */ + range->max_qual.level = 154; /* 27 .. 154 */ + range->max_qual.noise = 154; /* 27 .. 154 */ + } + range->sensitivity = 3; + + range->max_encoding_tokens = WEP_KEYS; + range->num_encoding_sizes = 2; + range->encoding_size[0] = 5; + range->encoding_size[1] = 13; + + over2 = 0; + len = prism2_get_datarates(dev, rates); + range->num_bitrates = 0; + for (i = 0; i < len; i++) { + if (range->num_bitrates < IW_MAX_BITRATES) { + range->bitrate[range->num_bitrates] = + rates[i] * 500000; + range->num_bitrates++; + } + if (rates[i] == 0x0b || rates[i] == 0x16) + over2 = 1; + } + /* estimated maximum TCP throughput values (bps) */ + range->throughput = over2 ? 5500000 : 1500000; + + range->min_rts = 0; + range->max_rts = 2347; + range->min_frag = 256; + range->max_frag = 2346; + + /* Event capability (kernel + driver) */ + range->event_capa[0] = (IW_EVENT_CAPA_K_0 | + IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | + IW_EVENT_CAPA_MASK(SIOCGIWAP) | + IW_EVENT_CAPA_MASK(SIOCGIWSCAN)); + range->event_capa[1] = IW_EVENT_CAPA_K_1; + range->event_capa[4] = (IW_EVENT_CAPA_MASK(IWEVTXDROP) | + IW_EVENT_CAPA_MASK(IWEVCUSTOM) | + IW_EVENT_CAPA_MASK(IWEVREGISTERED) | + IW_EVENT_CAPA_MASK(IWEVEXPIRED)); + + range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 | + IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP; + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) + range->scan_capa = IW_SCAN_CAPA_ESSID; + + return 0; +} + + +static int hostap_monitor_mode_enable(local_info_t *local) +{ + struct net_device *dev = local->dev; + + printk(KERN_DEBUG "Enabling monitor mode\n"); + hostap_monitor_set_type(local); + + if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, + HFA384X_PORTTYPE_PSEUDO_IBSS)) { + printk(KERN_DEBUG "Port type setting for monitor mode " + "failed\n"); + return -EOPNOTSUPP; + } + + /* Host decrypt is needed to get the IV and ICV fields; + * however, monitor mode seems to remove WEP flag from frame + * control field */ + if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS, + HFA384X_WEPFLAGS_HOSTENCRYPT | + HFA384X_WEPFLAGS_HOSTDECRYPT)) { + printk(KERN_DEBUG "WEP flags setting failed\n"); + return -EOPNOTSUPP; + } + + if (local->func->reset_port(dev) || + local->func->cmd(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_MONITOR << 8), + 0, NULL, NULL)) { + printk(KERN_DEBUG "Setting monitor mode failed\n"); + return -EOPNOTSUPP; + } + + return 0; +} + + +static int hostap_monitor_mode_disable(local_info_t *local) +{ + struct net_device *dev = local->ddev; + + if (dev == NULL) + return -1; + + printk(KERN_DEBUG "%s: Disabling monitor mode\n", dev->name); + dev->type = ARPHRD_ETHER; + + if (local->func->cmd(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_STOP << 8), + 0, NULL, NULL)) + return -1; + return hostap_set_encryption(local); +} + + +static int prism2_ioctl_siwmode(struct net_device *dev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + int double_reset = 0; + + iface = netdev_priv(dev); + local = iface->local; + + if (*mode != IW_MODE_ADHOC && *mode != IW_MODE_INFRA && + *mode != IW_MODE_MASTER && *mode != IW_MODE_REPEAT && + *mode != IW_MODE_MONITOR) + return -EOPNOTSUPP; + +#ifdef PRISM2_NO_STATION_MODES + if (*mode == IW_MODE_ADHOC || *mode == IW_MODE_INFRA) + return -EOPNOTSUPP; +#endif /* PRISM2_NO_STATION_MODES */ + + if (*mode == local->iw_mode) + return 0; + + if (*mode == IW_MODE_MASTER && local->essid[0] == '\0') { + printk(KERN_WARNING "%s: empty SSID not allowed in Master " + "mode\n", dev->name); + return -EINVAL; + } + + if (local->iw_mode == IW_MODE_MONITOR) + hostap_monitor_mode_disable(local); + + if ((local->iw_mode == IW_MODE_ADHOC || + local->iw_mode == IW_MODE_MONITOR) && *mode == IW_MODE_MASTER) { + /* There seems to be a firmware bug in at least STA f/w v1.5.6 + * that leaves beacon frames to use IBSS type when moving from + * IBSS to Host AP mode. Doing double Port0 reset seems to be + * enough to workaround this. */ + double_reset = 1; + } + + printk(KERN_DEBUG "prism2: %s: operating mode changed " + "%d -> %d\n", dev->name, local->iw_mode, *mode); + local->iw_mode = *mode; + + if (local->iw_mode == IW_MODE_MONITOR) + hostap_monitor_mode_enable(local); + else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && + !local->fw_encrypt_ok) { + printk(KERN_DEBUG "%s: defaulting to host-based encryption as " + "a workaround for firmware bug in Host AP mode WEP\n", + dev->name); + local->host_encrypt = 1; + } + + if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, + hostap_get_porttype(local))) + return -EOPNOTSUPP; + + if (local->func->reset_port(dev)) + return -EINVAL; + if (double_reset && local->func->reset_port(dev)) + return -EINVAL; + + if (local->iw_mode != IW_MODE_INFRA && local->iw_mode != IW_MODE_ADHOC) + { + /* netif_carrier is used only in client modes for now, so make + * sure carrier is on when moving to non-client modes. */ + netif_carrier_on(local->dev); + netif_carrier_on(local->ddev); + } + return 0; +} + + +static int prism2_ioctl_giwmode(struct net_device *dev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + switch (iface->type) { + case HOSTAP_INTERFACE_STA: + *mode = IW_MODE_INFRA; + break; + case HOSTAP_INTERFACE_WDS: + *mode = IW_MODE_REPEAT; + break; + default: + *mode = local->iw_mode; + break; + } + return 0; +} + + +static int prism2_ioctl_siwpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *wrq, char *extra) +{ +#ifdef PRISM2_NO_STATION_MODES + return -EOPNOTSUPP; +#else /* PRISM2_NO_STATION_MODES */ + int ret = 0; + + if (wrq->disabled) + return hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 0); + + switch (wrq->flags & IW_POWER_MODE) { + case IW_POWER_UNICAST_R: + ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 0); + if (ret) + return ret; + ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); + if (ret) + return ret; + break; + case IW_POWER_ALL_R: + ret = hostap_set_word(dev, HFA384X_RID_CNFMULTICASTRECEIVE, 1); + if (ret) + return ret; + ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); + if (ret) + return ret; + break; + case IW_POWER_ON: + break; + default: + return -EINVAL; + } + + if (wrq->flags & IW_POWER_TIMEOUT) { + ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); + if (ret) + return ret; + ret = hostap_set_word(dev, HFA384X_RID_CNFPMHOLDOVERDURATION, + wrq->value / 1024); + if (ret) + return ret; + } + if (wrq->flags & IW_POWER_PERIOD) { + ret = hostap_set_word(dev, HFA384X_RID_CNFPMENABLED, 1); + if (ret) + return ret; + ret = hostap_set_word(dev, HFA384X_RID_CNFMAXSLEEPDURATION, + wrq->value / 1024); + if (ret) + return ret; + } + + return ret; +#endif /* PRISM2_NO_STATION_MODES */ +} + + +static int prism2_ioctl_giwpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ +#ifdef PRISM2_NO_STATION_MODES + return -EOPNOTSUPP; +#else /* PRISM2_NO_STATION_MODES */ + struct hostap_interface *iface; + local_info_t *local; + __le16 enable, mcast; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_CNFPMENABLED, &enable, 2, 1) + < 0) + return -EINVAL; + + if (!le16_to_cpu(enable)) { + rrq->disabled = 1; + return 0; + } + + rrq->disabled = 0; + + if ((rrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { + __le16 timeout; + if (local->func->get_rid(dev, + HFA384X_RID_CNFPMHOLDOVERDURATION, + &timeout, 2, 1) < 0) + return -EINVAL; + + rrq->flags = IW_POWER_TIMEOUT; + rrq->value = le16_to_cpu(timeout) * 1024; + } else { + __le16 period; + if (local->func->get_rid(dev, HFA384X_RID_CNFMAXSLEEPDURATION, + &period, 2, 1) < 0) + return -EINVAL; + + rrq->flags = IW_POWER_PERIOD; + rrq->value = le16_to_cpu(period) * 1024; + } + + if (local->func->get_rid(dev, HFA384X_RID_CNFMULTICASTRECEIVE, &mcast, + 2, 1) < 0) + return -EINVAL; + + if (le16_to_cpu(mcast)) + rrq->flags |= IW_POWER_ALL_R; + else + rrq->flags |= IW_POWER_UNICAST_R; + + return 0; +#endif /* PRISM2_NO_STATION_MODES */ +} + + +static int prism2_ioctl_siwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (rrq->disabled) + return -EINVAL; + + /* setting retry limits is not supported with the current station + * firmware code; simulate this with alternative retry count for now */ + if (rrq->flags == IW_RETRY_LIMIT) { + if (rrq->value < 0) { + /* disable manual retry count setting and use firmware + * defaults */ + local->manual_retry_count = -1; + local->tx_control &= ~HFA384X_TX_CTRL_ALT_RTRY; + } else { + if (hostap_set_word(dev, HFA384X_RID_CNFALTRETRYCOUNT, + rrq->value)) { + printk(KERN_DEBUG "%s: Alternate retry count " + "setting to %d failed\n", + dev->name, rrq->value); + return -EOPNOTSUPP; + } + + local->manual_retry_count = rrq->value; + local->tx_control |= HFA384X_TX_CTRL_ALT_RTRY; + } + return 0; + } + + return -EOPNOTSUPP; + +#if 0 + /* what could be done, if firmware would support this.. */ + + if (rrq->flags & IW_RETRY_LIMIT) { + if (rrq->flags & IW_RETRY_LONG) + HFA384X_RID_LONGRETRYLIMIT = rrq->value; + else if (rrq->flags & IW_RETRY_SHORT) + HFA384X_RID_SHORTRETRYLIMIT = rrq->value; + else { + HFA384X_RID_LONGRETRYLIMIT = rrq->value; + HFA384X_RID_SHORTRETRYLIMIT = rrq->value; + } + + } + + if (rrq->flags & IW_RETRY_LIFETIME) { + HFA384X_RID_MAXTRANSMITLIFETIME = rrq->value / 1024; + } + + return 0; +#endif /* 0 */ +} + +static int prism2_ioctl_giwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + __le16 shortretry, longretry, lifetime, altretry; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->get_rid(dev, HFA384X_RID_SHORTRETRYLIMIT, &shortretry, + 2, 1) < 0 || + local->func->get_rid(dev, HFA384X_RID_LONGRETRYLIMIT, &longretry, + 2, 1) < 0 || + local->func->get_rid(dev, HFA384X_RID_MAXTRANSMITLIFETIME, + &lifetime, 2, 1) < 0) + return -EINVAL; + + rrq->disabled = 0; + + if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { + rrq->flags = IW_RETRY_LIFETIME; + rrq->value = le16_to_cpu(lifetime) * 1024; + } else { + if (local->manual_retry_count >= 0) { + rrq->flags = IW_RETRY_LIMIT; + if (local->func->get_rid(dev, + HFA384X_RID_CNFALTRETRYCOUNT, + &altretry, 2, 1) >= 0) + rrq->value = le16_to_cpu(altretry); + else + rrq->value = local->manual_retry_count; + } else if ((rrq->flags & IW_RETRY_LONG)) { + rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; + rrq->value = le16_to_cpu(longretry); + } else { + rrq->flags = IW_RETRY_LIMIT; + rrq->value = le16_to_cpu(shortretry); + if (shortretry != longretry) + rrq->flags |= IW_RETRY_SHORT; + } + } + return 0; +} + + +/* Note! This TX power controlling is experimental and should not be used in + * production use. It just sets raw power register and does not use any kind of + * feedback information from the measured TX power (CR58). This is now + * commented out to make sure that it is not used by accident. TX power + * configuration will be enabled again after proper algorithm using feedback + * has been implemented. */ + +#ifdef RAW_TXPOWER_SETTING +/* Map HFA386x's CR31 to and from dBm with some sort of ad hoc mapping.. + * This version assumes following mapping: + * CR31 is 7-bit value with -64 to +63 range. + * -64 is mapped into +20dBm and +63 into -43dBm. + * This is certainly not an exact mapping for every card, but at least + * increasing dBm value should correspond to increasing TX power. + */ + +static int prism2_txpower_hfa386x_to_dBm(u16 val) +{ + signed char tmp; + + if (val > 255) + val = 255; + + tmp = val; + tmp >>= 2; + + return -12 - tmp; +} + +static u16 prism2_txpower_dBm_to_hfa386x(int val) +{ + signed char tmp; + + if (val > 20) + return 128; + else if (val < -43) + return 127; + + tmp = val; + tmp = -12 - tmp; + tmp <<= 2; + + return (unsigned char) tmp; +} +#endif /* RAW_TXPOWER_SETTING */ + + +static int prism2_ioctl_siwtxpow(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; +#ifdef RAW_TXPOWER_SETTING + char *tmp; +#endif + u16 val; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + if (rrq->disabled) { + if (local->txpower_type != PRISM2_TXPOWER_OFF) { + val = 0xff; /* use all standby and sleep modes */ + ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_A_D_TEST_MODES2, + &val, NULL); + printk(KERN_DEBUG "%s: Turning radio off: %s\n", + dev->name, ret ? "failed" : "OK"); + local->txpower_type = PRISM2_TXPOWER_OFF; + } + return (ret ? -EOPNOTSUPP : 0); + } + + if (local->txpower_type == PRISM2_TXPOWER_OFF) { + val = 0; /* disable all standby and sleep modes */ + ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_A_D_TEST_MODES2, &val, NULL); + printk(KERN_DEBUG "%s: Turning radio on: %s\n", + dev->name, ret ? "failed" : "OK"); + local->txpower_type = PRISM2_TXPOWER_UNKNOWN; + } + +#ifdef RAW_TXPOWER_SETTING + if (!rrq->fixed && local->txpower_type != PRISM2_TXPOWER_AUTO) { + printk(KERN_DEBUG "Setting ALC on\n"); + val = HFA384X_TEST_CFG_BIT_ALC; + local->func->cmd(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_CFG_BITS << 8), 1, &val, NULL); + local->txpower_type = PRISM2_TXPOWER_AUTO; + return 0; + } + + if (local->txpower_type != PRISM2_TXPOWER_FIXED) { + printk(KERN_DEBUG "Setting ALC off\n"); + val = HFA384X_TEST_CFG_BIT_ALC; + local->func->cmd(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL); + local->txpower_type = PRISM2_TXPOWER_FIXED; + } + + if (rrq->flags == IW_TXPOW_DBM) + tmp = "dBm"; + else if (rrq->flags == IW_TXPOW_MWATT) + tmp = "mW"; + else + tmp = "UNKNOWN"; + printk(KERN_DEBUG "Setting TX power to %d %s\n", rrq->value, tmp); + + if (rrq->flags != IW_TXPOW_DBM) { + printk("SIOCSIWTXPOW with mW is not supported; use dBm\n"); + return -EOPNOTSUPP; + } + + local->txpower = rrq->value; + val = prism2_txpower_dBm_to_hfa386x(local->txpower); + if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_MANUAL_TX_POWER, &val, NULL)) + ret = -EOPNOTSUPP; +#else /* RAW_TXPOWER_SETTING */ + if (rrq->fixed) + ret = -EOPNOTSUPP; +#endif /* RAW_TXPOWER_SETTING */ + + return ret; +} + +static int prism2_ioctl_giwtxpow(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ +#ifdef RAW_TXPOWER_SETTING + struct hostap_interface *iface; + local_info_t *local; + u16 resp0; + + iface = netdev_priv(dev); + local = iface->local; + + rrq->flags = IW_TXPOW_DBM; + rrq->disabled = 0; + rrq->fixed = 0; + + if (local->txpower_type == PRISM2_TXPOWER_AUTO) { + if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF, + HFA386X_CR_MANUAL_TX_POWER, + NULL, &resp0) == 0) { + rrq->value = prism2_txpower_hfa386x_to_dBm(resp0); + } else { + /* Could not get real txpower; guess 15 dBm */ + rrq->value = 15; + } + } else if (local->txpower_type == PRISM2_TXPOWER_OFF) { + rrq->value = 0; + rrq->disabled = 1; + } else if (local->txpower_type == PRISM2_TXPOWER_FIXED) { + rrq->value = local->txpower; + rrq->fixed = 1; + } else { + printk("SIOCGIWTXPOW - unknown txpower_type=%d\n", + local->txpower_type); + } + return 0; +#else /* RAW_TXPOWER_SETTING */ + return -EOPNOTSUPP; +#endif /* RAW_TXPOWER_SETTING */ +} + + +#ifndef PRISM2_NO_STATION_MODES + +/* HostScan request works with and without host_roaming mode. In addition, it + * does not break current association. However, it requires newer station + * firmware version (>= 1.3.1) than scan request. */ +static int prism2_request_hostscan(struct net_device *dev, + u8 *ssid, u8 ssid_len) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_hostscan_request scan_req; + + iface = netdev_priv(dev); + local = iface->local; + + memset(&scan_req, 0, sizeof(scan_req)); + scan_req.channel_list = cpu_to_le16(local->channel_mask & + local->scan_channel_mask); + scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); + if (ssid) { + if (ssid_len > 32) + return -EINVAL; + scan_req.target_ssid_len = cpu_to_le16(ssid_len); + memcpy(scan_req.target_ssid, ssid, ssid_len); + } + + if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req, + sizeof(scan_req))) { + printk(KERN_DEBUG "%s: HOSTSCAN failed\n", dev->name); + return -EINVAL; + } + return 0; +} + + +static int prism2_request_scan(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_scan_request scan_req; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + memset(&scan_req, 0, sizeof(scan_req)); + scan_req.channel_list = cpu_to_le16(local->channel_mask & + local->scan_channel_mask); + scan_req.txrate = cpu_to_le16(HFA384X_RATES_1MBPS); + + /* FIX: + * It seems to be enough to set roaming mode for a short moment to + * host-based and then setup scanrequest data and return the mode to + * firmware-based. + * + * Master mode would need to drop to Managed mode for a short while + * to make scanning work.. Or sweep through the different channels and + * use passive scan based on beacons. */ + + if (!local->host_roaming) + hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE, + HFA384X_ROAMING_HOST); + + if (local->func->set_rid(dev, HFA384X_RID_SCANREQUEST, &scan_req, + sizeof(scan_req))) { + printk(KERN_DEBUG "SCANREQUEST failed\n"); + ret = -EINVAL; + } + + if (!local->host_roaming) + hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE, + HFA384X_ROAMING_FIRMWARE); + + return ret; +} + +#else /* !PRISM2_NO_STATION_MODES */ + +static inline int prism2_request_hostscan(struct net_device *dev, + u8 *ssid, u8 ssid_len) +{ + return -EOPNOTSUPP; +} + + +static inline int prism2_request_scan(struct net_device *dev) +{ + return -EOPNOTSUPP; +} + +#endif /* !PRISM2_NO_STATION_MODES */ + + +static int prism2_ioctl_siwscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret; + u8 *ssid = NULL, ssid_len = 0; + struct iw_scan_req *req = (struct iw_scan_req *) extra; + + iface = netdev_priv(dev); + local = iface->local; + + if (data->length < sizeof(struct iw_scan_req)) + req = NULL; + + if (local->iw_mode == IW_MODE_MASTER) { + /* In master mode, we just return the results of our local + * tables, so we don't need to start anything... + * Jean II */ + data->length = 0; + return 0; + } + + if (!local->dev_enabled) + return -ENETDOWN; + + if (req && data->flags & IW_SCAN_THIS_ESSID) { + ssid = req->essid; + ssid_len = req->essid_len; + + if (ssid_len && + ((local->iw_mode != IW_MODE_INFRA && + local->iw_mode != IW_MODE_ADHOC) || + (local->sta_fw_ver < PRISM2_FW_VER(1,3,1)))) + return -EOPNOTSUPP; + } + + if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) + ret = prism2_request_hostscan(dev, ssid, ssid_len); + else + ret = prism2_request_scan(dev); + + if (ret == 0) + local->scan_timestamp = jiffies; + + /* Could inquire F101, F103 or wait for SIOCGIWSCAN and read RID */ + + return ret; +} + + +#ifndef PRISM2_NO_STATION_MODES +static char * __prism2_translate_scan(local_info_t *local, + struct iw_request_info *info, + struct hfa384x_hostscan_result *scan, + struct hostap_bss_info *bss, + char *current_ev, char *end_buf) +{ + int i, chan; + struct iw_event iwe; + char *current_val; + u16 capabilities; + u8 *pos; + u8 *ssid, *bssid; + size_t ssid_len; + char *buf; + + if (bss) { + ssid = bss->ssid; + ssid_len = bss->ssid_len; + bssid = bss->bssid; + } else { + ssid = scan->ssid; + ssid_len = le16_to_cpu(scan->ssid_len); + bssid = scan->bssid; + } + if (ssid_len > 32) + ssid_len = 32; + + /* First entry *MUST* be the AP MAC address */ + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, + IW_EV_ADDR_LEN); + + /* Other entries will be displayed in the order we give them */ + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWESSID; + iwe.u.data.length = ssid_len; + iwe.u.data.flags = 1; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, ssid); + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWMODE; + if (bss) { + capabilities = bss->capab_info; + } else { + capabilities = le16_to_cpu(scan->capability); + } + if (capabilities & (WLAN_CAPABILITY_ESS | + WLAN_CAPABILITY_IBSS)) { + if (capabilities & WLAN_CAPABILITY_ESS) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_ADHOC; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); + } + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWFREQ; + if (scan) { + chan = le16_to_cpu(scan->chid); + } else if (bss) { + chan = bss->chan; + } else { + chan = 0; + } + + if (chan > 0) { + iwe.u.freq.m = freq_list[chan - 1] * 100000; + iwe.u.freq.e = 1; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + } + + if (scan) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVQUAL; + if (local->last_scan_type == PRISM2_HOSTSCAN) { + iwe.u.qual.level = le16_to_cpu(scan->sl); + iwe.u.qual.noise = le16_to_cpu(scan->anl); + } else { + iwe.u.qual.level = + HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->sl)); + iwe.u.qual.noise = + HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->anl)); + } + iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED + | IW_QUAL_QUAL_INVALID + | IW_QUAL_DBM; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); + } + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWENCODE; + if (capabilities & WLAN_CAPABILITY_PRIVACY) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, ""); + + /* TODO: add SuppRates into BSS table */ + if (scan) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = SIOCGIWRATE; + current_val = current_ev + iwe_stream_lcp_len(info); + pos = scan->sup_rates; + for (i = 0; i < sizeof(scan->sup_rates); i++) { + if (pos[i] == 0) + break; + /* Bit rate given in 500 kb/s units (+ 0x80) */ + iwe.u.bitrate.value = ((pos[i] & 0x7f) * 500000); + current_val = iwe_stream_add_value( + info, current_ev, current_val, end_buf, &iwe, + IW_EV_PARAM_LEN); + } + /* Check if we added any event */ + if ((current_val - current_ev) > iwe_stream_lcp_len(info)) + current_ev = current_val; + } + + /* TODO: add BeaconInt,resp_rate,atim into BSS table */ + buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_ATOMIC); + if (buf && scan) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + sprintf(buf, "bcn_int=%d", le16_to_cpu(scan->beacon_interval)); + iwe.u.data.length = strlen(buf); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, buf); + + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + sprintf(buf, "resp_rate=%d", le16_to_cpu(scan->rate)); + iwe.u.data.length = strlen(buf); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, buf); + + if (local->last_scan_type == PRISM2_HOSTSCAN && + (capabilities & WLAN_CAPABILITY_IBSS)) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + sprintf(buf, "atim=%d", le16_to_cpu(scan->atim)); + iwe.u.data.length = strlen(buf); + current_ev = iwe_stream_add_point(info, current_ev, + end_buf, &iwe, buf); + } + } + kfree(buf); + + if (bss && bss->wpa_ie_len > 0 && bss->wpa_ie_len <= MAX_WPA_IE_LEN) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVGENIE; + iwe.u.data.length = bss->wpa_ie_len; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->wpa_ie); + } + + if (bss && bss->rsn_ie_len > 0 && bss->rsn_ie_len <= MAX_WPA_IE_LEN) { + memset(&iwe, 0, sizeof(iwe)); + iwe.cmd = IWEVGENIE; + iwe.u.data.length = bss->rsn_ie_len; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->rsn_ie); + } + + return current_ev; +} + + +/* Translate scan data returned from the card to a card independent + * format that the Wireless Tools will understand - Jean II */ +static inline int prism2_translate_scan(local_info_t *local, + struct iw_request_info *info, + char *buffer, int buflen) +{ + struct hfa384x_hostscan_result *scan; + int entry, hostscan; + char *current_ev = buffer; + char *end_buf = buffer + buflen; + struct list_head *ptr; + + spin_lock_bh(&local->lock); + + list_for_each(ptr, &local->bss_list) { + struct hostap_bss_info *bss; + bss = list_entry(ptr, struct hostap_bss_info, list); + bss->included = 0; + } + + hostscan = local->last_scan_type == PRISM2_HOSTSCAN; + for (entry = 0; entry < local->last_scan_results_count; entry++) { + int found = 0; + scan = &local->last_scan_results[entry]; + + /* Report every SSID if the AP is using multiple SSIDs. If no + * BSS record is found (e.g., when WPA mode is disabled), + * report the AP once. */ + list_for_each(ptr, &local->bss_list) { + struct hostap_bss_info *bss; + bss = list_entry(ptr, struct hostap_bss_info, list); + if (ether_addr_equal(bss->bssid, scan->bssid)) { + bss->included = 1; + current_ev = __prism2_translate_scan( + local, info, scan, bss, current_ev, + end_buf); + found++; + } + } + if (!found) { + current_ev = __prism2_translate_scan( + local, info, scan, NULL, current_ev, end_buf); + } + /* Check if there is space for one more entry */ + if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a bigger buffer */ + spin_unlock_bh(&local->lock); + return -E2BIG; + } + } + + /* Prism2 firmware has limits (32 at least in some versions) for number + * of BSSes in scan results. Extend this limit by using local BSS list. + */ + list_for_each(ptr, &local->bss_list) { + struct hostap_bss_info *bss; + bss = list_entry(ptr, struct hostap_bss_info, list); + if (bss->included) + continue; + current_ev = __prism2_translate_scan(local, info, NULL, bss, + current_ev, end_buf); + /* Check if there is space for one more entry */ + if ((end_buf - current_ev) <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a bigger buffer */ + spin_unlock_bh(&local->lock); + return -E2BIG; + } + } + + spin_unlock_bh(&local->lock); + + return current_ev - buffer; +} +#endif /* PRISM2_NO_STATION_MODES */ + + +static inline int prism2_ioctl_giwscan_sta(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ +#ifdef PRISM2_NO_STATION_MODES + return -EOPNOTSUPP; +#else /* PRISM2_NO_STATION_MODES */ + struct hostap_interface *iface; + local_info_t *local; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + /* Wait until the scan is finished. We can probably do better + * than that - Jean II */ + if (local->scan_timestamp && + time_before(jiffies, local->scan_timestamp + 3 * HZ)) { + /* Important note : we don't want to block the caller + * until results are ready for various reasons. + * First, managing wait queues is complex and racy + * (there may be multiple simultaneous callers). + * Second, we grab some rtnetlink lock before coming + * here (in dev_ioctl()). + * Third, the caller can wait on the Wireless Event + * - Jean II */ + return -EAGAIN; + } + local->scan_timestamp = 0; + + res = prism2_translate_scan(local, info, extra, data->length); + + if (res >= 0) { + data->length = res; + return 0; + } else { + data->length = 0; + return res; + } +#endif /* PRISM2_NO_STATION_MODES */ +} + + +static int prism2_ioctl_giwscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + int res; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->iw_mode == IW_MODE_MASTER) { + /* In MASTER mode, it doesn't make sense to go around + * scanning the frequencies and make the stations we serve + * wait when what the user is really interested about is the + * list of stations and access points we are talking to. + * So, just extract results from our cache... + * Jean II */ + + /* Translate to WE format */ + res = prism2_ap_translate_scan(dev, info, extra); + if (res >= 0) { + printk(KERN_DEBUG "Scan result translation succeeded " + "(length=%d)\n", res); + data->length = res; + return 0; + } else { + printk(KERN_DEBUG + "Scan result translation failed (res=%d)\n", + res); + data->length = 0; + return res; + } + } else { + /* Station mode */ + return prism2_ioctl_giwscan_sta(dev, info, data, extra); + } +} + + +static const struct iw_priv_args prism2_priv[] = { + { PRISM2_IOCTL_MONITOR, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor" }, + { PRISM2_IOCTL_READMIF, + IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "readmif" }, + { PRISM2_IOCTL_WRITEMIF, + IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 2, 0, "writemif" }, + { PRISM2_IOCTL_RESET, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "reset" }, + { PRISM2_IOCTL_INQUIRE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "inquire" }, + { PRISM2_IOCTL_SET_RID_WORD, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_rid_word" }, + { PRISM2_IOCTL_MACCMD, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "maccmd" }, + { PRISM2_IOCTL_WDS_ADD, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_add" }, + { PRISM2_IOCTL_WDS_DEL, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "wds_del" }, + { PRISM2_IOCTL_ADDMAC, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "addmac" }, + { PRISM2_IOCTL_DELMAC, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "delmac" }, + { PRISM2_IOCTL_KICKMAC, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "kickmac" }, + /* --- raw access to sub-ioctls --- */ + { PRISM2_IOCTL_PRISM2_PARAM, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "prism2_param" }, + { PRISM2_IOCTL_GET_PRISM2_PARAM, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprism2_param" }, + /* --- sub-ioctls handlers --- */ + { PRISM2_IOCTL_PRISM2_PARAM, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "" }, + { PRISM2_IOCTL_GET_PRISM2_PARAM, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "" }, + /* --- sub-ioctls definitions --- */ + { PRISM2_PARAM_TXRATECTRL, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "txratectrl" }, + { PRISM2_PARAM_TXRATECTRL, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettxratectrl" }, + { PRISM2_PARAM_BEACON_INT, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "beacon_int" }, + { PRISM2_PARAM_BEACON_INT, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbeacon_int" }, +#ifndef PRISM2_NO_STATION_MODES + { PRISM2_PARAM_PSEUDO_IBSS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "pseudo_ibss" }, + { PRISM2_PARAM_PSEUDO_IBSS, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getpseudo_ibss" }, +#endif /* PRISM2_NO_STATION_MODES */ + { PRISM2_PARAM_ALC, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "alc" }, + { PRISM2_PARAM_ALC, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getalc" }, + { PRISM2_PARAM_DUMP, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dump" }, + { PRISM2_PARAM_DUMP, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdump" }, + { PRISM2_PARAM_OTHER_AP_POLICY, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "other_ap_policy" }, + { PRISM2_PARAM_OTHER_AP_POLICY, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getother_ap_pol" }, + { PRISM2_PARAM_AP_MAX_INACTIVITY, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_inactivity" }, + { PRISM2_PARAM_AP_MAX_INACTIVITY, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_inactivi" }, + { PRISM2_PARAM_AP_BRIDGE_PACKETS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bridge_packets" }, + { PRISM2_PARAM_AP_BRIDGE_PACKETS, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbridge_packe" }, + { PRISM2_PARAM_DTIM_PERIOD, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "dtim_period" }, + { PRISM2_PARAM_DTIM_PERIOD, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdtim_period" }, + { PRISM2_PARAM_AP_NULLFUNC_ACK, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "nullfunc_ack" }, + { PRISM2_PARAM_AP_NULLFUNC_ACK, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getnullfunc_ack" }, + { PRISM2_PARAM_MAX_WDS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "max_wds" }, + { PRISM2_PARAM_MAX_WDS, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmax_wds" }, + { PRISM2_PARAM_AP_AUTOM_AP_WDS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "autom_ap_wds" }, + { PRISM2_PARAM_AP_AUTOM_AP_WDS, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getautom_ap_wds" }, + { PRISM2_PARAM_AP_AUTH_ALGS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_auth_algs" }, + { PRISM2_PARAM_AP_AUTH_ALGS, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_auth_algs" }, + { PRISM2_PARAM_MONITOR_ALLOW_FCSERR, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "allow_fcserr" }, + { PRISM2_PARAM_MONITOR_ALLOW_FCSERR, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getallow_fcserr" }, + { PRISM2_PARAM_HOST_ENCRYPT, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_encrypt" }, + { PRISM2_PARAM_HOST_ENCRYPT, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_encrypt" }, + { PRISM2_PARAM_HOST_DECRYPT, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_decrypt" }, + { PRISM2_PARAM_HOST_DECRYPT, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_decrypt" }, +#ifndef PRISM2_NO_STATION_MODES + { PRISM2_PARAM_HOST_ROAMING, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "host_roaming" }, + { PRISM2_PARAM_HOST_ROAMING, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethost_roaming" }, +#endif /* PRISM2_NO_STATION_MODES */ + { PRISM2_PARAM_BCRX_STA_KEY, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "bcrx_sta_key" }, + { PRISM2_PARAM_BCRX_STA_KEY, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbcrx_sta_key" }, + { PRISM2_PARAM_IEEE_802_1X, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ieee_802_1x" }, + { PRISM2_PARAM_IEEE_802_1X, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getieee_802_1x" }, + { PRISM2_PARAM_ANTSEL_TX, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_tx" }, + { PRISM2_PARAM_ANTSEL_TX, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_tx" }, + { PRISM2_PARAM_ANTSEL_RX, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "antsel_rx" }, + { PRISM2_PARAM_ANTSEL_RX, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getantsel_rx" }, + { PRISM2_PARAM_MONITOR_TYPE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "monitor_type" }, + { PRISM2_PARAM_MONITOR_TYPE, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getmonitor_type" }, + { PRISM2_PARAM_WDS_TYPE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wds_type" }, + { PRISM2_PARAM_WDS_TYPE, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwds_type" }, + { PRISM2_PARAM_HOSTSCAN, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostscan" }, + { PRISM2_PARAM_HOSTSCAN, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostscan" }, + { PRISM2_PARAM_AP_SCAN, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "ap_scan" }, + { PRISM2_PARAM_AP_SCAN, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getap_scan" }, + { PRISM2_PARAM_ENH_SEC, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "enh_sec" }, + { PRISM2_PARAM_ENH_SEC, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getenh_sec" }, +#ifdef PRISM2_IO_DEBUG + { PRISM2_PARAM_IO_DEBUG, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "io_debug" }, + { PRISM2_PARAM_IO_DEBUG, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getio_debug" }, +#endif /* PRISM2_IO_DEBUG */ + { PRISM2_PARAM_BASIC_RATES, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "basic_rates" }, + { PRISM2_PARAM_BASIC_RATES, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getbasic_rates" }, + { PRISM2_PARAM_OPER_RATES, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "oper_rates" }, + { PRISM2_PARAM_OPER_RATES, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getoper_rates" }, + { PRISM2_PARAM_HOSTAPD, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd" }, + { PRISM2_PARAM_HOSTAPD, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd" }, + { PRISM2_PARAM_HOSTAPD_STA, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "hostapd_sta" }, + { PRISM2_PARAM_HOSTAPD_STA, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostapd_sta" }, + { PRISM2_PARAM_WPA, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wpa" }, + { PRISM2_PARAM_WPA, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwpa" }, + { PRISM2_PARAM_PRIVACY_INVOKED, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "privacy_invoked" }, + { PRISM2_PARAM_PRIVACY_INVOKED, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getprivacy_invo" }, + { PRISM2_PARAM_TKIP_COUNTERMEASURES, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "tkip_countermea" }, + { PRISM2_PARAM_TKIP_COUNTERMEASURES, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gettkip_counter" }, + { PRISM2_PARAM_DROP_UNENCRYPTED, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "drop_unencrypte" }, + { PRISM2_PARAM_DROP_UNENCRYPTED, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getdrop_unencry" }, + { PRISM2_PARAM_SCAN_CHANNEL_MASK, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "scan_channels" }, + { PRISM2_PARAM_SCAN_CHANNEL_MASK, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getscan_channel" }, +}; + + +static int prism2_ioctl_priv_inquire(struct net_device *dev, int *i) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->cmd(dev, HFA384X_CMDCODE_INQUIRE, *i, NULL, NULL)) + return -EOPNOTSUPP; + + return 0; +} + + +static int prism2_ioctl_priv_prism2_param(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + int *i = (int *) extra; + int param = *i; + int value = *(i + 1); + int ret = 0; + u16 val; + + iface = netdev_priv(dev); + local = iface->local; + + switch (param) { + case PRISM2_PARAM_TXRATECTRL: + local->fw_tx_rate_control = value; + break; + + case PRISM2_PARAM_BEACON_INT: + if (hostap_set_word(dev, HFA384X_RID_CNFBEACONINT, value) || + local->func->reset_port(dev)) + ret = -EINVAL; + else + local->beacon_int = value; + break; + +#ifndef PRISM2_NO_STATION_MODES + case PRISM2_PARAM_PSEUDO_IBSS: + if (value == local->pseudo_adhoc) + break; + + if (value != 0 && value != 1) { + ret = -EINVAL; + break; + } + + printk(KERN_DEBUG "prism2: %s: pseudo IBSS change %d -> %d\n", + dev->name, local->pseudo_adhoc, value); + local->pseudo_adhoc = value; + if (local->iw_mode != IW_MODE_ADHOC) + break; + + if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, + hostap_get_porttype(local))) { + ret = -EOPNOTSUPP; + break; + } + + if (local->func->reset_port(dev)) + ret = -EINVAL; + break; +#endif /* PRISM2_NO_STATION_MODES */ + + case PRISM2_PARAM_ALC: + printk(KERN_DEBUG "%s: %s ALC\n", dev->name, + value == 0 ? "Disabling" : "Enabling"); + val = HFA384X_TEST_CFG_BIT_ALC; + local->func->cmd(dev, HFA384X_CMDCODE_TEST | + (HFA384X_TEST_CFG_BITS << 8), + value == 0 ? 0 : 1, &val, NULL); + break; + + case PRISM2_PARAM_DUMP: + local->frame_dump = value; + break; + + case PRISM2_PARAM_OTHER_AP_POLICY: + if (value < 0 || value > 3) { + ret = -EINVAL; + break; + } + if (local->ap != NULL) + local->ap->ap_policy = value; + break; + + case PRISM2_PARAM_AP_MAX_INACTIVITY: + if (value < 0 || value > 7 * 24 * 60 * 60) { + ret = -EINVAL; + break; + } + if (local->ap != NULL) + local->ap->max_inactivity = value * HZ; + break; + + case PRISM2_PARAM_AP_BRIDGE_PACKETS: + if (local->ap != NULL) + local->ap->bridge_packets = value; + break; + + case PRISM2_PARAM_DTIM_PERIOD: + if (value < 0 || value > 65535) { + ret = -EINVAL; + break; + } + if (hostap_set_word(dev, HFA384X_RID_CNFOWNDTIMPERIOD, value) + || local->func->reset_port(dev)) + ret = -EINVAL; + else + local->dtim_period = value; + break; + + case PRISM2_PARAM_AP_NULLFUNC_ACK: + if (local->ap != NULL) + local->ap->nullfunc_ack = value; + break; + + case PRISM2_PARAM_MAX_WDS: + local->wds_max_connections = value; + break; + + case PRISM2_PARAM_AP_AUTOM_AP_WDS: + if (local->ap != NULL) { + if (!local->ap->autom_ap_wds && value) { + /* add WDS link to all APs in STA table */ + hostap_add_wds_links(local); + } + local->ap->autom_ap_wds = value; + } + break; + + case PRISM2_PARAM_AP_AUTH_ALGS: + local->auth_algs = value; + if (hostap_set_auth_algs(local)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_MONITOR_ALLOW_FCSERR: + local->monitor_allow_fcserr = value; + break; + + case PRISM2_PARAM_HOST_ENCRYPT: + local->host_encrypt = value; + if (hostap_set_encryption(local) || + local->func->reset_port(dev)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_HOST_DECRYPT: + local->host_decrypt = value; + if (hostap_set_encryption(local) || + local->func->reset_port(dev)) + ret = -EINVAL; + break; + +#ifndef PRISM2_NO_STATION_MODES + case PRISM2_PARAM_HOST_ROAMING: + if (value < 0 || value > 2) { + ret = -EINVAL; + break; + } + local->host_roaming = value; + if (hostap_set_roaming(local) || local->func->reset_port(dev)) + ret = -EINVAL; + break; +#endif /* PRISM2_NO_STATION_MODES */ + + case PRISM2_PARAM_BCRX_STA_KEY: + local->bcrx_sta_key = value; + break; + + case PRISM2_PARAM_IEEE_802_1X: + local->ieee_802_1x = value; + break; + + case PRISM2_PARAM_ANTSEL_TX: + if (value < 0 || value > HOSTAP_ANTSEL_HIGH) { + ret = -EINVAL; + break; + } + local->antsel_tx = value; + hostap_set_antsel(local); + break; + + case PRISM2_PARAM_ANTSEL_RX: + if (value < 0 || value > HOSTAP_ANTSEL_HIGH) { + ret = -EINVAL; + break; + } + local->antsel_rx = value; + hostap_set_antsel(local); + break; + + case PRISM2_PARAM_MONITOR_TYPE: + if (value != PRISM2_MONITOR_80211 && + value != PRISM2_MONITOR_CAPHDR && + value != PRISM2_MONITOR_PRISM && + value != PRISM2_MONITOR_RADIOTAP) { + ret = -EINVAL; + break; + } + local->monitor_type = value; + if (local->iw_mode == IW_MODE_MONITOR) + hostap_monitor_set_type(local); + break; + + case PRISM2_PARAM_WDS_TYPE: + local->wds_type = value; + break; + + case PRISM2_PARAM_HOSTSCAN: + { + struct hfa384x_hostscan_request scan_req; + u16 rate; + + memset(&scan_req, 0, sizeof(scan_req)); + scan_req.channel_list = cpu_to_le16(0x3fff); + switch (value) { + case 1: rate = HFA384X_RATES_1MBPS; break; + case 2: rate = HFA384X_RATES_2MBPS; break; + case 3: rate = HFA384X_RATES_5MBPS; break; + case 4: rate = HFA384X_RATES_11MBPS; break; + default: rate = HFA384X_RATES_1MBPS; break; + } + scan_req.txrate = cpu_to_le16(rate); + /* leave SSID empty to accept all SSIDs */ + + if (local->iw_mode == IW_MODE_MASTER) { + if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, + HFA384X_PORTTYPE_BSS) || + local->func->reset_port(dev)) + printk(KERN_DEBUG "Leaving Host AP mode " + "for HostScan failed\n"); + } + + if (local->func->set_rid(dev, HFA384X_RID_HOSTSCAN, &scan_req, + sizeof(scan_req))) { + printk(KERN_DEBUG "HOSTSCAN failed\n"); + ret = -EINVAL; + } + if (local->iw_mode == IW_MODE_MASTER) { + wait_queue_t __wait; + init_waitqueue_entry(&__wait, current); + add_wait_queue(&local->hostscan_wq, &__wait); + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ); + if (signal_pending(current)) + ret = -EINTR; + set_current_state(TASK_RUNNING); + remove_wait_queue(&local->hostscan_wq, &__wait); + + if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, + HFA384X_PORTTYPE_HOSTAP) || + local->func->reset_port(dev)) + printk(KERN_DEBUG "Returning to Host AP mode " + "after HostScan failed\n"); + } + break; + } + + case PRISM2_PARAM_AP_SCAN: + local->passive_scan_interval = value; + if (timer_pending(&local->passive_scan_timer)) + del_timer(&local->passive_scan_timer); + if (value > 0 && value < INT_MAX / HZ) { + local->passive_scan_timer.expires = jiffies + + local->passive_scan_interval * HZ; + add_timer(&local->passive_scan_timer); + } + break; + + case PRISM2_PARAM_ENH_SEC: + if (value < 0 || value > 3) { + ret = -EINVAL; + break; + } + local->enh_sec = value; + if (hostap_set_word(dev, HFA384X_RID_CNFENHSECURITY, + local->enh_sec) || + local->func->reset_port(dev)) { + printk(KERN_INFO "%s: cnfEnhSecurity requires STA f/w " + "1.6.3 or newer\n", dev->name); + ret = -EOPNOTSUPP; + } + break; + +#ifdef PRISM2_IO_DEBUG + case PRISM2_PARAM_IO_DEBUG: + local->io_debug_enabled = value; + break; +#endif /* PRISM2_IO_DEBUG */ + + case PRISM2_PARAM_BASIC_RATES: + if ((value & local->tx_rate_control) != value || value == 0) { + printk(KERN_INFO "%s: invalid basic rate set - basic " + "rates must be in supported rate set\n", + dev->name); + ret = -EINVAL; + break; + } + local->basic_rates = value; + if (hostap_set_word(dev, HFA384X_RID_CNFBASICRATES, + local->basic_rates) || + local->func->reset_port(dev)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_OPER_RATES: + local->tx_rate_control = value; + if (hostap_set_rate(dev)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_HOSTAPD: + ret = hostap_set_hostapd(local, value, 1); + break; + + case PRISM2_PARAM_HOSTAPD_STA: + ret = hostap_set_hostapd_sta(local, value, 1); + break; + + case PRISM2_PARAM_WPA: + local->wpa = value; + if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) + ret = -EOPNOTSUPP; + else if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, + value ? 1 : 0)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_PRIVACY_INVOKED: + local->privacy_invoked = value; + if (hostap_set_encryption(local) || + local->func->reset_port(dev)) + ret = -EINVAL; + break; + + case PRISM2_PARAM_TKIP_COUNTERMEASURES: + local->tkip_countermeasures = value; + break; + + case PRISM2_PARAM_DROP_UNENCRYPTED: + local->drop_unencrypted = value; + break; + + case PRISM2_PARAM_SCAN_CHANNEL_MASK: + local->scan_channel_mask = value; + break; + + default: + printk(KERN_DEBUG "%s: prism2_param: unknown param %d\n", + dev->name, param); + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + + +static int prism2_ioctl_priv_get_prism2_param(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + int *param = (int *) extra; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + switch (*param) { + case PRISM2_PARAM_TXRATECTRL: + *param = local->fw_tx_rate_control; + break; + + case PRISM2_PARAM_BEACON_INT: + *param = local->beacon_int; + break; + + case PRISM2_PARAM_PSEUDO_IBSS: + *param = local->pseudo_adhoc; + break; + + case PRISM2_PARAM_ALC: + ret = -EOPNOTSUPP; /* FIX */ + break; + + case PRISM2_PARAM_DUMP: + *param = local->frame_dump; + break; + + case PRISM2_PARAM_OTHER_AP_POLICY: + if (local->ap != NULL) + *param = local->ap->ap_policy; + else + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_AP_MAX_INACTIVITY: + if (local->ap != NULL) + *param = local->ap->max_inactivity / HZ; + else + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_AP_BRIDGE_PACKETS: + if (local->ap != NULL) + *param = local->ap->bridge_packets; + else + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_DTIM_PERIOD: + *param = local->dtim_period; + break; + + case PRISM2_PARAM_AP_NULLFUNC_ACK: + if (local->ap != NULL) + *param = local->ap->nullfunc_ack; + else + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_MAX_WDS: + *param = local->wds_max_connections; + break; + + case PRISM2_PARAM_AP_AUTOM_AP_WDS: + if (local->ap != NULL) + *param = local->ap->autom_ap_wds; + else + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_AP_AUTH_ALGS: + *param = local->auth_algs; + break; + + case PRISM2_PARAM_MONITOR_ALLOW_FCSERR: + *param = local->monitor_allow_fcserr; + break; + + case PRISM2_PARAM_HOST_ENCRYPT: + *param = local->host_encrypt; + break; + + case PRISM2_PARAM_HOST_DECRYPT: + *param = local->host_decrypt; + break; + + case PRISM2_PARAM_HOST_ROAMING: + *param = local->host_roaming; + break; + + case PRISM2_PARAM_BCRX_STA_KEY: + *param = local->bcrx_sta_key; + break; + + case PRISM2_PARAM_IEEE_802_1X: + *param = local->ieee_802_1x; + break; + + case PRISM2_PARAM_ANTSEL_TX: + *param = local->antsel_tx; + break; + + case PRISM2_PARAM_ANTSEL_RX: + *param = local->antsel_rx; + break; + + case PRISM2_PARAM_MONITOR_TYPE: + *param = local->monitor_type; + break; + + case PRISM2_PARAM_WDS_TYPE: + *param = local->wds_type; + break; + + case PRISM2_PARAM_HOSTSCAN: + ret = -EOPNOTSUPP; + break; + + case PRISM2_PARAM_AP_SCAN: + *param = local->passive_scan_interval; + break; + + case PRISM2_PARAM_ENH_SEC: + *param = local->enh_sec; + break; + +#ifdef PRISM2_IO_DEBUG + case PRISM2_PARAM_IO_DEBUG: + *param = local->io_debug_enabled; + break; +#endif /* PRISM2_IO_DEBUG */ + + case PRISM2_PARAM_BASIC_RATES: + *param = local->basic_rates; + break; + + case PRISM2_PARAM_OPER_RATES: + *param = local->tx_rate_control; + break; + + case PRISM2_PARAM_HOSTAPD: + *param = local->hostapd; + break; + + case PRISM2_PARAM_HOSTAPD_STA: + *param = local->hostapd_sta; + break; + + case PRISM2_PARAM_WPA: + if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) + ret = -EOPNOTSUPP; + *param = local->wpa; + break; + + case PRISM2_PARAM_PRIVACY_INVOKED: + *param = local->privacy_invoked; + break; + + case PRISM2_PARAM_TKIP_COUNTERMEASURES: + *param = local->tkip_countermeasures; + break; + + case PRISM2_PARAM_DROP_UNENCRYPTED: + *param = local->drop_unencrypted; + break; + + case PRISM2_PARAM_SCAN_CHANNEL_MASK: + *param = local->scan_channel_mask; + break; + + default: + printk(KERN_DEBUG "%s: get_prism2_param: unknown param %d\n", + dev->name, *param); + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + + +static int prism2_ioctl_priv_readmif(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 resp0; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->cmd(dev, HFA384X_CMDCODE_READMIF, *extra, NULL, + &resp0)) + return -EOPNOTSUPP; + else + *extra = resp0; + + return 0; +} + + +static int prism2_ioctl_priv_writemif(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, char *extra) +{ + struct hostap_interface *iface; + local_info_t *local; + u16 cr, val; + + iface = netdev_priv(dev); + local = iface->local; + + cr = *extra; + val = *(extra + 1); + if (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF, cr, &val, NULL)) + return -EOPNOTSUPP; + + return 0; +} + + +static int prism2_ioctl_priv_monitor(struct net_device *dev, int *i) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret = 0; + u32 mode; + + iface = netdev_priv(dev); + local = iface->local; + + printk(KERN_DEBUG "%s: process %d (%s) used deprecated iwpriv monitor " + "- update software to use iwconfig mode monitor\n", + dev->name, task_pid_nr(current), current->comm); + + /* Backward compatibility code - this can be removed at some point */ + + if (*i == 0) { + /* Disable monitor mode - old mode was not saved, so go to + * Master mode */ + mode = IW_MODE_MASTER; + ret = prism2_ioctl_siwmode(dev, NULL, &mode, NULL); + } else if (*i == 1) { + /* netlink socket mode is not supported anymore since it did + * not separate different devices from each other and was not + * best method for delivering large amount of packets to + * user space */ + ret = -EOPNOTSUPP; + } else if (*i == 2 || *i == 3) { + switch (*i) { + case 2: + local->monitor_type = PRISM2_MONITOR_80211; + break; + case 3: + local->monitor_type = PRISM2_MONITOR_PRISM; + break; + } + mode = IW_MODE_MONITOR; + ret = prism2_ioctl_siwmode(dev, NULL, &mode, NULL); + hostap_monitor_mode_enable(local); + } else + ret = -EINVAL; + + return ret; +} + + +static int prism2_ioctl_priv_reset(struct net_device *dev, int *i) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + printk(KERN_DEBUG "%s: manual reset request(%d)\n", dev->name, *i); + switch (*i) { + case 0: + /* Disable and enable card */ + local->func->hw_shutdown(dev, 1); + local->func->hw_config(dev, 0); + break; + + case 1: + /* COR sreset */ + local->func->hw_reset(dev); + break; + + case 2: + /* Disable and enable port 0 */ + local->func->reset_port(dev); + break; + + case 3: + prism2_sta_deauth(local, WLAN_REASON_DEAUTH_LEAVING); + if (local->func->cmd(dev, HFA384X_CMDCODE_DISABLE, 0, NULL, + NULL)) + return -EINVAL; + break; + + case 4: + if (local->func->cmd(dev, HFA384X_CMDCODE_ENABLE, 0, NULL, + NULL)) + return -EINVAL; + break; + + default: + printk(KERN_DEBUG "Unknown reset request %d\n", *i); + return -EOPNOTSUPP; + } + + return 0; +} + + +static int prism2_ioctl_priv_set_rid_word(struct net_device *dev, int *i) +{ + int rid = *i; + int value = *(i + 1); + + printk(KERN_DEBUG "%s: Set RID[0x%X] = %d\n", dev->name, rid, value); + + if (hostap_set_word(dev, rid, value)) + return -EINVAL; + + return 0; +} + + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +static int ap_mac_cmd_ioctl(local_info_t *local, int *cmd) +{ + int ret = 0; + + switch (*cmd) { + case AP_MAC_CMD_POLICY_OPEN: + local->ap->mac_restrictions.policy = MAC_POLICY_OPEN; + break; + case AP_MAC_CMD_POLICY_ALLOW: + local->ap->mac_restrictions.policy = MAC_POLICY_ALLOW; + break; + case AP_MAC_CMD_POLICY_DENY: + local->ap->mac_restrictions.policy = MAC_POLICY_DENY; + break; + case AP_MAC_CMD_FLUSH: + ap_control_flush_macs(&local->ap->mac_restrictions); + break; + case AP_MAC_CMD_KICKALL: + ap_control_kickall(local->ap); + hostap_deauth_all_stas(local->dev, local->ap, 0); + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +#ifdef PRISM2_DOWNLOAD_SUPPORT +static int prism2_ioctl_priv_download(local_info_t *local, struct iw_point *p) +{ + struct prism2_download_param *param; + int ret = 0; + + if (p->length < sizeof(struct prism2_download_param) || + p->length > 1024 || !p->pointer) + return -EINVAL; + + param = kmalloc(p->length, GFP_KERNEL); + if (param == NULL) + return -ENOMEM; + + if (copy_from_user(param, p->pointer, p->length)) { + ret = -EFAULT; + goto out; + } + + if (p->length < sizeof(struct prism2_download_param) + + param->num_areas * sizeof(struct prism2_download_area)) { + ret = -EINVAL; + goto out; + } + + ret = local->func->download(local, param); + + out: + kfree(param); + return ret; +} +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + +static int prism2_set_genericelement(struct net_device *dev, u8 *elem, + size_t len) +{ + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + u8 *buf; + + /* + * Add 16-bit length in the beginning of the buffer because Prism2 RID + * includes it. + */ + buf = kmalloc(len + 2, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + *((__le16 *) buf) = cpu_to_le16(len); + memcpy(buf + 2, elem, len); + + kfree(local->generic_elem); + local->generic_elem = buf; + local->generic_elem_len = len + 2; + + return local->func->set_rid(local->dev, HFA384X_RID_GENERICELEMENT, + buf, len + 2); +} + + +static int prism2_ioctl_siwauth(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *data, char *extra) +{ + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + + switch (data->flags & IW_AUTH_INDEX) { + case IW_AUTH_WPA_VERSION: + case IW_AUTH_CIPHER_PAIRWISE: + case IW_AUTH_CIPHER_GROUP: + case IW_AUTH_KEY_MGMT: + /* + * Host AP driver does not use these parameters and allows + * wpa_supplicant to control them internally. + */ + break; + case IW_AUTH_TKIP_COUNTERMEASURES: + local->tkip_countermeasures = data->value; + break; + case IW_AUTH_DROP_UNENCRYPTED: + local->drop_unencrypted = data->value; + break; + case IW_AUTH_80211_AUTH_ALG: + local->auth_algs = data->value; + break; + case IW_AUTH_WPA_ENABLED: + if (data->value == 0) { + local->wpa = 0; + if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) + break; + prism2_set_genericelement(dev, "", 0); + local->host_roaming = 0; + local->privacy_invoked = 0; + if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, + 0) || + hostap_set_roaming(local) || + hostap_set_encryption(local) || + local->func->reset_port(dev)) + return -EINVAL; + break; + } + if (local->sta_fw_ver < PRISM2_FW_VER(1,7,0)) + return -EOPNOTSUPP; + local->host_roaming = 2; + local->privacy_invoked = 1; + local->wpa = 1; + if (hostap_set_word(dev, HFA384X_RID_SSNHANDLINGMODE, 1) || + hostap_set_roaming(local) || + hostap_set_encryption(local) || + local->func->reset_port(dev)) + return -EINVAL; + break; + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + local->ieee_802_1x = data->value; + break; + case IW_AUTH_PRIVACY_INVOKED: + local->privacy_invoked = data->value; + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + + +static int prism2_ioctl_giwauth(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *data, char *extra) +{ + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + + switch (data->flags & IW_AUTH_INDEX) { + case IW_AUTH_WPA_VERSION: + case IW_AUTH_CIPHER_PAIRWISE: + case IW_AUTH_CIPHER_GROUP: + case IW_AUTH_KEY_MGMT: + /* + * Host AP driver does not use these parameters and allows + * wpa_supplicant to control them internally. + */ + return -EOPNOTSUPP; + case IW_AUTH_TKIP_COUNTERMEASURES: + data->value = local->tkip_countermeasures; + break; + case IW_AUTH_DROP_UNENCRYPTED: + data->value = local->drop_unencrypted; + break; + case IW_AUTH_80211_AUTH_ALG: + data->value = local->auth_algs; + break; + case IW_AUTH_WPA_ENABLED: + data->value = local->wpa; + break; + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + data->value = local->ieee_802_1x; + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + + +static int prism2_ioctl_siwencodeext(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *extra) +{ + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + struct iw_encode_ext *ext = (struct iw_encode_ext *) extra; + int i, ret = 0; + struct lib80211_crypto_ops *ops; + struct lib80211_crypt_data **crypt; + void *sta_ptr; + u8 *addr; + const char *alg, *module; + + i = erq->flags & IW_ENCODE_INDEX; + if (i > WEP_KEYS) + return -EINVAL; + if (i < 1 || i > WEP_KEYS) + i = local->crypt_info.tx_keyidx; + else + i--; + if (i < 0 || i >= WEP_KEYS) + return -EINVAL; + + addr = ext->addr.sa_data; + if (is_broadcast_ether_addr(addr)) { + sta_ptr = NULL; + crypt = &local->crypt_info.crypt[i]; + } else { + if (i != 0) + return -EINVAL; + sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt); + if (sta_ptr == NULL) { + if (local->iw_mode == IW_MODE_INFRA) { + /* + * TODO: add STA entry for the current AP so + * that unicast key can be used. For now, this + * is emulated by using default key idx 0. + */ + i = 0; + crypt = &local->crypt_info.crypt[i]; + } else + return -EINVAL; + } + } + + if ((erq->flags & IW_ENCODE_DISABLED) || + ext->alg == IW_ENCODE_ALG_NONE) { + if (*crypt) + lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); + goto done; + } + + switch (ext->alg) { + case IW_ENCODE_ALG_WEP: + alg = "WEP"; + module = "lib80211_crypt_wep"; + break; + case IW_ENCODE_ALG_TKIP: + alg = "TKIP"; + module = "lib80211_crypt_tkip"; + break; + case IW_ENCODE_ALG_CCMP: + alg = "CCMP"; + module = "lib80211_crypt_ccmp"; + break; + default: + printk(KERN_DEBUG "%s: unsupported algorithm %d\n", + local->dev->name, ext->alg); + ret = -EOPNOTSUPP; + goto done; + } + + ops = lib80211_get_crypto_ops(alg); + if (ops == NULL) { + request_module(module); + ops = lib80211_get_crypto_ops(alg); + } + if (ops == NULL) { + printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", + local->dev->name, alg); + ret = -EOPNOTSUPP; + goto done; + } + + if (sta_ptr || ext->alg != IW_ENCODE_ALG_WEP) { + /* + * Per station encryption and other than WEP algorithms + * require host-based encryption, so force them on + * automatically. + */ + local->host_decrypt = local->host_encrypt = 1; + } + + if (*crypt == NULL || (*crypt)->ops != ops) { + struct lib80211_crypt_data *new_crypt; + + lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); + + new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), + GFP_KERNEL); + if (new_crypt == NULL) { + ret = -ENOMEM; + goto done; + } + new_crypt->ops = ops; + if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + new_crypt->priv = new_crypt->ops->init(i); + if (new_crypt->priv == NULL) { + kfree(new_crypt); + ret = -EINVAL; + goto done; + } + + *crypt = new_crypt; + } + + /* + * TODO: if ext_flags does not have IW_ENCODE_EXT_RX_SEQ_VALID, the + * existing seq# should not be changed. + * TODO: if ext_flags has IW_ENCODE_EXT_TX_SEQ_VALID, next TX seq# + * should be changed to something else than zero. + */ + if ((!(ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) || ext->key_len > 0) + && (*crypt)->ops->set_key && + (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq, + (*crypt)->priv) < 0) { + printk(KERN_DEBUG "%s: key setting failed\n", + local->dev->name); + ret = -EINVAL; + goto done; + } + + if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + if (!sta_ptr) + local->crypt_info.tx_keyidx = i; + } + + + if (sta_ptr == NULL && ext->key_len > 0) { + int first = 1, j; + for (j = 0; j < WEP_KEYS; j++) { + if (j != i && local->crypt_info.crypt[j]) { + first = 0; + break; + } + } + if (first) + local->crypt_info.tx_keyidx = i; + } + + done: + if (sta_ptr) + hostap_handle_sta_release(sta_ptr); + + local->open_wep = erq->flags & IW_ENCODE_OPEN; + + /* + * Do not reset port0 if card is in Managed mode since resetting will + * generate new IEEE 802.11 authentication which may end up in looping + * with IEEE 802.1X. Prism2 documentation seem to require port reset + * after WEP configuration. However, keys are apparently changed at + * least in Managed mode. + */ + if (ret == 0 && + (hostap_set_encryption(local) || + (local->iw_mode != IW_MODE_INFRA && + local->func->reset_port(local->dev)))) + ret = -EINVAL; + + return ret; +} + + +static int prism2_ioctl_giwencodeext(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *extra) +{ + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + struct lib80211_crypt_data **crypt; + void *sta_ptr; + int max_key_len, i; + struct iw_encode_ext *ext = (struct iw_encode_ext *) extra; + u8 *addr; + + max_key_len = erq->length - sizeof(*ext); + if (max_key_len < 0) + return -EINVAL; + + i = erq->flags & IW_ENCODE_INDEX; + if (i < 1 || i > WEP_KEYS) + i = local->crypt_info.tx_keyidx; + else + i--; + + addr = ext->addr.sa_data; + if (is_broadcast_ether_addr(addr)) { + sta_ptr = NULL; + crypt = &local->crypt_info.crypt[i]; + } else { + i = 0; + sta_ptr = ap_crypt_get_ptrs(local->ap, addr, 0, &crypt); + if (sta_ptr == NULL) + return -EINVAL; + } + erq->flags = i + 1; + memset(ext, 0, sizeof(*ext)); + + if (*crypt == NULL || (*crypt)->ops == NULL) { + ext->alg = IW_ENCODE_ALG_NONE; + ext->key_len = 0; + erq->flags |= IW_ENCODE_DISABLED; + } else { + if (strcmp((*crypt)->ops->name, "WEP") == 0) + ext->alg = IW_ENCODE_ALG_WEP; + else if (strcmp((*crypt)->ops->name, "TKIP") == 0) + ext->alg = IW_ENCODE_ALG_TKIP; + else if (strcmp((*crypt)->ops->name, "CCMP") == 0) + ext->alg = IW_ENCODE_ALG_CCMP; + else + return -EINVAL; + + if ((*crypt)->ops->get_key) { + ext->key_len = + (*crypt)->ops->get_key(ext->key, + max_key_len, + ext->tx_seq, + (*crypt)->priv); + if (ext->key_len && + (ext->alg == IW_ENCODE_ALG_TKIP || + ext->alg == IW_ENCODE_ALG_CCMP)) + ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID; + } + } + + if (sta_ptr) + hostap_handle_sta_release(sta_ptr); + + return 0; +} + + +static int prism2_ioctl_set_encryption(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + int ret = 0; + struct lib80211_crypto_ops *ops; + struct lib80211_crypt_data **crypt; + void *sta_ptr; + + param->u.crypt.err = 0; + param->u.crypt.alg[HOSTAP_CRYPT_ALG_NAME_LEN - 1] = '\0'; + + if (param_len != + (int) ((char *) param->u.crypt.key - (char *) param) + + param->u.crypt.key_len) + return -EINVAL; + + if (is_broadcast_ether_addr(param->sta_addr)) { + if (param->u.crypt.idx >= WEP_KEYS) + return -EINVAL; + sta_ptr = NULL; + crypt = &local->crypt_info.crypt[param->u.crypt.idx]; + } else { + if (param->u.crypt.idx) + return -EINVAL; + sta_ptr = ap_crypt_get_ptrs( + local->ap, param->sta_addr, + (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_PERMANENT), + &crypt); + + if (sta_ptr == NULL) { + param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR; + return -EINVAL; + } + } + + if (strcmp(param->u.crypt.alg, "none") == 0) { + if (crypt) + lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); + goto done; + } + + ops = lib80211_get_crypto_ops(param->u.crypt.alg); + if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { + request_module("lib80211_crypt_wep"); + ops = lib80211_get_crypto_ops(param->u.crypt.alg); + } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { + request_module("lib80211_crypt_tkip"); + ops = lib80211_get_crypto_ops(param->u.crypt.alg); + } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { + request_module("lib80211_crypt_ccmp"); + ops = lib80211_get_crypto_ops(param->u.crypt.alg); + } + if (ops == NULL) { + printk(KERN_DEBUG "%s: unknown crypto alg '%s'\n", + local->dev->name, param->u.crypt.alg); + param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ALG; + ret = -EINVAL; + goto done; + } + + /* station based encryption and other than WEP algorithms require + * host-based encryption, so force them on automatically */ + local->host_decrypt = local->host_encrypt = 1; + + if (*crypt == NULL || (*crypt)->ops != ops) { + struct lib80211_crypt_data *new_crypt; + + lib80211_crypt_delayed_deinit(&local->crypt_info, crypt); + + new_crypt = kzalloc(sizeof(struct lib80211_crypt_data), + GFP_KERNEL); + if (new_crypt == NULL) { + ret = -ENOMEM; + goto done; + } + new_crypt->ops = ops; + new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); + if (new_crypt->priv == NULL) { + kfree(new_crypt); + param->u.crypt.err = + HOSTAP_CRYPT_ERR_CRYPT_INIT_FAILED; + ret = -EINVAL; + goto done; + } + + *crypt = new_crypt; + } + + if ((!(param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) || + param->u.crypt.key_len > 0) && (*crypt)->ops->set_key && + (*crypt)->ops->set_key(param->u.crypt.key, + param->u.crypt.key_len, param->u.crypt.seq, + (*crypt)->priv) < 0) { + printk(KERN_DEBUG "%s: key setting failed\n", + local->dev->name); + param->u.crypt.err = HOSTAP_CRYPT_ERR_KEY_SET_FAILED; + ret = -EINVAL; + goto done; + } + + if (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) { + if (!sta_ptr) + local->crypt_info.tx_keyidx = param->u.crypt.idx; + else if (param->u.crypt.idx) { + printk(KERN_DEBUG "%s: TX key idx setting failed\n", + local->dev->name); + param->u.crypt.err = + HOSTAP_CRYPT_ERR_TX_KEY_SET_FAILED; + ret = -EINVAL; + goto done; + } + } + + done: + if (sta_ptr) + hostap_handle_sta_release(sta_ptr); + + /* Do not reset port0 if card is in Managed mode since resetting will + * generate new IEEE 802.11 authentication which may end up in looping + * with IEEE 802.1X. Prism2 documentation seem to require port reset + * after WEP configuration. However, keys are apparently changed at + * least in Managed mode. */ + if (ret == 0 && + (hostap_set_encryption(local) || + (local->iw_mode != IW_MODE_INFRA && + local->func->reset_port(local->dev)))) { + param->u.crypt.err = HOSTAP_CRYPT_ERR_CARD_CONF_FAILED; + return -EINVAL; + } + + return ret; +} + + +static int prism2_ioctl_get_encryption(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + struct lib80211_crypt_data **crypt; + void *sta_ptr; + int max_key_len; + + param->u.crypt.err = 0; + + max_key_len = param_len - + (int) ((char *) param->u.crypt.key - (char *) param); + if (max_key_len < 0) + return -EINVAL; + + if (is_broadcast_ether_addr(param->sta_addr)) { + sta_ptr = NULL; + if (param->u.crypt.idx >= WEP_KEYS) + param->u.crypt.idx = local->crypt_info.tx_keyidx; + crypt = &local->crypt_info.crypt[param->u.crypt.idx]; + } else { + param->u.crypt.idx = 0; + sta_ptr = ap_crypt_get_ptrs(local->ap, param->sta_addr, 0, + &crypt); + + if (sta_ptr == NULL) { + param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR; + return -EINVAL; + } + } + + if (*crypt == NULL || (*crypt)->ops == NULL) { + memcpy(param->u.crypt.alg, "none", 5); + param->u.crypt.key_len = 0; + param->u.crypt.idx = 0xff; + } else { + strncpy(param->u.crypt.alg, (*crypt)->ops->name, + HOSTAP_CRYPT_ALG_NAME_LEN); + param->u.crypt.key_len = 0; + + memset(param->u.crypt.seq, 0, 8); + if ((*crypt)->ops->get_key) { + param->u.crypt.key_len = + (*crypt)->ops->get_key(param->u.crypt.key, + max_key_len, + param->u.crypt.seq, + (*crypt)->priv); + } + } + + if (sta_ptr) + hostap_handle_sta_release(sta_ptr); + + return 0; +} + + +static int prism2_ioctl_get_rid(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + int max_len, res; + + max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN; + if (max_len < 0) + return -EINVAL; + + res = local->func->get_rid(local->dev, param->u.rid.rid, + param->u.rid.data, param->u.rid.len, 0); + if (res >= 0) { + param->u.rid.len = res; + return 0; + } + + return res; +} + + +static int prism2_ioctl_set_rid(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + int max_len; + + max_len = param_len - PRISM2_HOSTAPD_RID_HDR_LEN; + if (max_len < 0 || max_len < param->u.rid.len) + return -EINVAL; + + return local->func->set_rid(local->dev, param->u.rid.rid, + param->u.rid.data, param->u.rid.len); +} + + +static int prism2_ioctl_set_assoc_ap_addr(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + printk(KERN_DEBUG "%ssta: associated as client with AP %pM\n", + local->dev->name, param->sta_addr); + memcpy(local->assoc_ap_addr, param->sta_addr, ETH_ALEN); + return 0; +} + + +static int prism2_ioctl_siwgenie(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + return prism2_set_genericelement(dev, extra, data->length); +} + + +static int prism2_ioctl_giwgenie(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + int len = local->generic_elem_len - 2; + + if (len <= 0 || local->generic_elem == NULL) { + data->length = 0; + return 0; + } + + if (data->length < len) + return -E2BIG; + + data->length = len; + memcpy(extra, local->generic_elem + 2, len); + + return 0; +} + + +static int prism2_ioctl_set_generic_element(local_info_t *local, + struct prism2_hostapd_param *param, + int param_len) +{ + int max_len, len; + + len = param->u.generic_elem.len; + max_len = param_len - PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN; + if (max_len < 0 || max_len < len) + return -EINVAL; + + return prism2_set_genericelement(local->dev, + param->u.generic_elem.data, len); +} + + +static int prism2_ioctl_siwmlme(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + struct iw_mlme *mlme = (struct iw_mlme *) extra; + __le16 reason; + + reason = cpu_to_le16(mlme->reason_code); + + switch (mlme->cmd) { + case IW_MLME_DEAUTH: + return prism2_sta_send_mgmt(local, mlme->addr.sa_data, + IEEE80211_STYPE_DEAUTH, + (u8 *) &reason, 2); + case IW_MLME_DISASSOC: + return prism2_sta_send_mgmt(local, mlme->addr.sa_data, + IEEE80211_STYPE_DISASSOC, + (u8 *) &reason, 2); + default: + return -EOPNOTSUPP; + } +} + + +static int prism2_ioctl_mlme(local_info_t *local, + struct prism2_hostapd_param *param) +{ + __le16 reason; + + reason = cpu_to_le16(param->u.mlme.reason_code); + switch (param->u.mlme.cmd) { + case MLME_STA_DEAUTH: + return prism2_sta_send_mgmt(local, param->sta_addr, + IEEE80211_STYPE_DEAUTH, + (u8 *) &reason, 2); + case MLME_STA_DISASSOC: + return prism2_sta_send_mgmt(local, param->sta_addr, + IEEE80211_STYPE_DISASSOC, + (u8 *) &reason, 2); + default: + return -EOPNOTSUPP; + } +} + + +static int prism2_ioctl_scan_req(local_info_t *local, + struct prism2_hostapd_param *param) +{ +#ifndef PRISM2_NO_STATION_MODES + if ((local->iw_mode != IW_MODE_INFRA && + local->iw_mode != IW_MODE_ADHOC) || + (local->sta_fw_ver < PRISM2_FW_VER(1,3,1))) + return -EOPNOTSUPP; + + if (!local->dev_enabled) + return -ENETDOWN; + + return prism2_request_hostscan(local->dev, param->u.scan_req.ssid, + param->u.scan_req.ssid_len); +#else /* PRISM2_NO_STATION_MODES */ + return -EOPNOTSUPP; +#endif /* PRISM2_NO_STATION_MODES */ +} + + +static int prism2_ioctl_priv_hostapd(local_info_t *local, struct iw_point *p) +{ + struct prism2_hostapd_param *param; + int ret = 0; + int ap_ioctl = 0; + + if (p->length < sizeof(struct prism2_hostapd_param) || + p->length > PRISM2_HOSTAPD_MAX_BUF_SIZE || !p->pointer) + return -EINVAL; + + param = kmalloc(p->length, GFP_KERNEL); + if (param == NULL) + return -ENOMEM; + + if (copy_from_user(param, p->pointer, p->length)) { + ret = -EFAULT; + goto out; + } + + switch (param->cmd) { + case PRISM2_SET_ENCRYPTION: + ret = prism2_ioctl_set_encryption(local, param, p->length); + break; + case PRISM2_GET_ENCRYPTION: + ret = prism2_ioctl_get_encryption(local, param, p->length); + break; + case PRISM2_HOSTAPD_GET_RID: + ret = prism2_ioctl_get_rid(local, param, p->length); + break; + case PRISM2_HOSTAPD_SET_RID: + ret = prism2_ioctl_set_rid(local, param, p->length); + break; + case PRISM2_HOSTAPD_SET_ASSOC_AP_ADDR: + ret = prism2_ioctl_set_assoc_ap_addr(local, param, p->length); + break; + case PRISM2_HOSTAPD_SET_GENERIC_ELEMENT: + ret = prism2_ioctl_set_generic_element(local, param, + p->length); + break; + case PRISM2_HOSTAPD_MLME: + ret = prism2_ioctl_mlme(local, param); + break; + case PRISM2_HOSTAPD_SCAN_REQ: + ret = prism2_ioctl_scan_req(local, param); + break; + default: + ret = prism2_hostapd(local->ap, param); + ap_ioctl = 1; + break; + } + + if (ret == 1 || !ap_ioctl) { + if (copy_to_user(p->pointer, param, p->length)) { + ret = -EFAULT; + goto out; + } else if (ap_ioctl) + ret = 0; + } + + out: + kfree(param); + return ret; +} + + +static void prism2_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + + strlcpy(info->driver, "hostap", sizeof(info->driver)); + snprintf(info->fw_version, sizeof(info->fw_version), + "%d.%d.%d", (local->sta_fw_ver >> 16) & 0xff, + (local->sta_fw_ver >> 8) & 0xff, + local->sta_fw_ver & 0xff); +} + +const struct ethtool_ops prism2_ethtool_ops = { + .get_drvinfo = prism2_get_drvinfo +}; + + +/* Structures to export the Wireless Handlers */ + +static const iw_handler prism2_handler[] = +{ + (iw_handler) NULL, /* SIOCSIWCOMMIT */ + (iw_handler) prism2_get_name, /* SIOCGIWNAME */ + (iw_handler) NULL, /* SIOCSIWNWID */ + (iw_handler) NULL, /* SIOCGIWNWID */ + (iw_handler) prism2_ioctl_siwfreq, /* SIOCSIWFREQ */ + (iw_handler) prism2_ioctl_giwfreq, /* SIOCGIWFREQ */ + (iw_handler) prism2_ioctl_siwmode, /* SIOCSIWMODE */ + (iw_handler) prism2_ioctl_giwmode, /* SIOCGIWMODE */ + (iw_handler) prism2_ioctl_siwsens, /* SIOCSIWSENS */ + (iw_handler) prism2_ioctl_giwsens, /* SIOCGIWSENS */ + (iw_handler) NULL /* not used */, /* SIOCSIWRANGE */ + (iw_handler) prism2_ioctl_giwrange, /* SIOCGIWRANGE */ + (iw_handler) NULL /* not used */, /* SIOCSIWPRIV */ + (iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */ + (iw_handler) NULL /* not used */, /* SIOCSIWSTATS */ + (iw_handler) NULL /* kernel code */, /* SIOCGIWSTATS */ + iw_handler_set_spy, /* SIOCSIWSPY */ + iw_handler_get_spy, /* SIOCGIWSPY */ + iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ + iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ + (iw_handler) prism2_ioctl_siwap, /* SIOCSIWAP */ + (iw_handler) prism2_ioctl_giwap, /* SIOCGIWAP */ + (iw_handler) prism2_ioctl_siwmlme, /* SIOCSIWMLME */ + (iw_handler) prism2_ioctl_giwaplist, /* SIOCGIWAPLIST */ + (iw_handler) prism2_ioctl_siwscan, /* SIOCSIWSCAN */ + (iw_handler) prism2_ioctl_giwscan, /* SIOCGIWSCAN */ + (iw_handler) prism2_ioctl_siwessid, /* SIOCSIWESSID */ + (iw_handler) prism2_ioctl_giwessid, /* SIOCGIWESSID */ + (iw_handler) prism2_ioctl_siwnickn, /* SIOCSIWNICKN */ + (iw_handler) prism2_ioctl_giwnickn, /* SIOCGIWNICKN */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) prism2_ioctl_siwrate, /* SIOCSIWRATE */ + (iw_handler) prism2_ioctl_giwrate, /* SIOCGIWRATE */ + (iw_handler) prism2_ioctl_siwrts, /* SIOCSIWRTS */ + (iw_handler) prism2_ioctl_giwrts, /* SIOCGIWRTS */ + (iw_handler) prism2_ioctl_siwfrag, /* SIOCSIWFRAG */ + (iw_handler) prism2_ioctl_giwfrag, /* SIOCGIWFRAG */ + (iw_handler) prism2_ioctl_siwtxpow, /* SIOCSIWTXPOW */ + (iw_handler) prism2_ioctl_giwtxpow, /* SIOCGIWTXPOW */ + (iw_handler) prism2_ioctl_siwretry, /* SIOCSIWRETRY */ + (iw_handler) prism2_ioctl_giwretry, /* SIOCGIWRETRY */ + (iw_handler) prism2_ioctl_siwencode, /* SIOCSIWENCODE */ + (iw_handler) prism2_ioctl_giwencode, /* SIOCGIWENCODE */ + (iw_handler) prism2_ioctl_siwpower, /* SIOCSIWPOWER */ + (iw_handler) prism2_ioctl_giwpower, /* SIOCGIWPOWER */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) prism2_ioctl_siwgenie, /* SIOCSIWGENIE */ + (iw_handler) prism2_ioctl_giwgenie, /* SIOCGIWGENIE */ + (iw_handler) prism2_ioctl_siwauth, /* SIOCSIWAUTH */ + (iw_handler) prism2_ioctl_giwauth, /* SIOCGIWAUTH */ + (iw_handler) prism2_ioctl_siwencodeext, /* SIOCSIWENCODEEXT */ + (iw_handler) prism2_ioctl_giwencodeext, /* SIOCGIWENCODEEXT */ + (iw_handler) NULL, /* SIOCSIWPMKSA */ + (iw_handler) NULL, /* -- hole -- */ +}; + +static const iw_handler prism2_private_handler[] = +{ /* SIOCIWFIRSTPRIV + */ + (iw_handler) prism2_ioctl_priv_prism2_param, /* 0 */ + (iw_handler) prism2_ioctl_priv_get_prism2_param, /* 1 */ + (iw_handler) prism2_ioctl_priv_writemif, /* 2 */ + (iw_handler) prism2_ioctl_priv_readmif, /* 3 */ +}; + +const struct iw_handler_def hostap_iw_handler_def = +{ + .num_standard = ARRAY_SIZE(prism2_handler), + .num_private = ARRAY_SIZE(prism2_private_handler), + .num_private_args = ARRAY_SIZE(prism2_priv), + .standard = (iw_handler *) prism2_handler, + .private = (iw_handler *) prism2_private_handler, + .private_args = (struct iw_priv_args *) prism2_priv, + .get_wireless_stats = hostap_get_wireless_stats, +}; + + +int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct iwreq *wrq = (struct iwreq *) ifr; + struct hostap_interface *iface; + local_info_t *local; + int ret = 0; + + iface = netdev_priv(dev); + local = iface->local; + + switch (cmd) { + /* Private ioctls (iwpriv) that have not yet been converted + * into new wireless extensions API */ + + case PRISM2_IOCTL_INQUIRE: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_inquire(dev, (int *) wrq->u.name); + break; + + case PRISM2_IOCTL_MONITOR: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_monitor(dev, (int *) wrq->u.name); + break; + + case PRISM2_IOCTL_RESET: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_reset(dev, (int *) wrq->u.name); + break; + + case PRISM2_IOCTL_WDS_ADD: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_wds_add(local, wrq->u.ap_addr.sa_data, 1); + break; + + case PRISM2_IOCTL_WDS_DEL: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_wds_del(local, wrq->u.ap_addr.sa_data, 1, 0); + break; + + case PRISM2_IOCTL_SET_RID_WORD: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_set_rid_word(dev, + (int *) wrq->u.name); + break; + +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + case PRISM2_IOCTL_MACCMD: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = ap_mac_cmd_ioctl(local, (int *) wrq->u.name); + break; + + case PRISM2_IOCTL_ADDMAC: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = ap_control_add_mac(&local->ap->mac_restrictions, + wrq->u.ap_addr.sa_data); + break; + case PRISM2_IOCTL_DELMAC: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = ap_control_del_mac(&local->ap->mac_restrictions, + wrq->u.ap_addr.sa_data); + break; + case PRISM2_IOCTL_KICKMAC: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = ap_control_kick_mac(local->ap, local->dev, + wrq->u.ap_addr.sa_data); + break; +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + + /* Private ioctls that are not used with iwpriv; + * in SIOCDEVPRIVATE range */ + +#ifdef PRISM2_DOWNLOAD_SUPPORT + case PRISM2_IOCTL_DOWNLOAD: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_download(local, &wrq->u.data); + break; +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + + case PRISM2_IOCTL_HOSTAPD: + if (!capable(CAP_NET_ADMIN)) ret = -EPERM; + else ret = prism2_ioctl_priv_hostapd(local, &wrq->u.data); + break; + + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} diff --git a/drivers/net/wireless/intersil/hostap/hostap_main.c b/drivers/net/wireless/intersil/hostap/hostap_main.c new file mode 100644 index 000000000..80d4228ba --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_main.c @@ -0,0 +1,1140 @@ +/* + * Host AP (software wireless LAN access point) driver for + * Intersil Prism2/2.5/3 - hostap.o module, common routines + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * <j@w1.fi> + * Copyright (c) 2002-2005, Jouni Malinen <j@w1.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. See README and COPYING for + * more details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/proc_fs.h> +#include <linux/if_arp.h> +#include <linux/delay.h> +#include <linux/random.h> +#include <linux/workqueue.h> +#include <linux/kmod.h> +#include <linux/rtnetlink.h> +#include <linux/wireless.h> +#include <linux/etherdevice.h> +#include <net/net_namespace.h> +#include <net/iw_handler.h> +#include <net/lib80211.h> +#include <asm/uaccess.h> + +#include "hostap_wlan.h" +#include "hostap_80211.h" +#include "hostap_ap.h" +#include "hostap.h" + +MODULE_AUTHOR("Jouni Malinen"); +MODULE_DESCRIPTION("Host AP common routines"); +MODULE_LICENSE("GPL"); + +#define TX_TIMEOUT (2 * HZ) + +#define PRISM2_MAX_FRAME_SIZE 2304 +#define PRISM2_MIN_MTU 256 +/* FIX: */ +#define PRISM2_MAX_MTU (PRISM2_MAX_FRAME_SIZE - (6 /* LLC */ + 8 /* WEP */)) + + +struct net_device * hostap_add_interface(struct local_info *local, + int type, int rtnl_locked, + const char *prefix, + const char *name) +{ + struct net_device *dev, *mdev; + struct hostap_interface *iface; + int ret; + + dev = alloc_etherdev(sizeof(struct hostap_interface)); + if (dev == NULL) + return NULL; + + iface = netdev_priv(dev); + iface->dev = dev; + iface->local = local; + iface->type = type; + list_add(&iface->list, &local->hostap_interfaces); + + mdev = local->dev; + eth_hw_addr_inherit(dev, mdev); + dev->base_addr = mdev->base_addr; + dev->irq = mdev->irq; + dev->mem_start = mdev->mem_start; + dev->mem_end = mdev->mem_end; + + hostap_setup_dev(dev, local, type); + dev->destructor = free_netdev; + + sprintf(dev->name, "%s%s", prefix, name); + if (!rtnl_locked) + rtnl_lock(); + + SET_NETDEV_DEV(dev, mdev->dev.parent); + ret = register_netdevice(dev); + + if (!rtnl_locked) + rtnl_unlock(); + + if (ret < 0) { + printk(KERN_WARNING "%s: failed to add new netdevice!\n", + dev->name); + free_netdev(dev); + return NULL; + } + + printk(KERN_DEBUG "%s: registered netdevice %s\n", + mdev->name, dev->name); + + return dev; +} + + +void hostap_remove_interface(struct net_device *dev, int rtnl_locked, + int remove_from_list) +{ + struct hostap_interface *iface; + + if (!dev) + return; + + iface = netdev_priv(dev); + + if (remove_from_list) { + list_del(&iface->list); + } + + if (dev == iface->local->ddev) + iface->local->ddev = NULL; + else if (dev == iface->local->apdev) + iface->local->apdev = NULL; + else if (dev == iface->local->stadev) + iface->local->stadev = NULL; + + if (rtnl_locked) + unregister_netdevice(dev); + else + unregister_netdev(dev); + + /* dev->destructor = free_netdev() will free the device data, including + * private data, when removing the device */ +} + + +static inline int prism2_wds_special_addr(u8 *addr) +{ + if (addr[0] || addr[1] || addr[2] || addr[3] || addr[4] || addr[5]) + return 0; + + return 1; +} + + +int prism2_wds_add(local_info_t *local, u8 *remote_addr, + int rtnl_locked) +{ + struct net_device *dev; + struct list_head *ptr; + struct hostap_interface *iface, *empty, *match; + + empty = match = NULL; + read_lock_bh(&local->iface_lock); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type != HOSTAP_INTERFACE_WDS) + continue; + + if (prism2_wds_special_addr(iface->u.wds.remote_addr)) + empty = iface; + else if (ether_addr_equal(iface->u.wds.remote_addr, remote_addr)) { + match = iface; + break; + } + } + if (!match && empty && !prism2_wds_special_addr(remote_addr)) { + /* take pre-allocated entry into use */ + memcpy(empty->u.wds.remote_addr, remote_addr, ETH_ALEN); + read_unlock_bh(&local->iface_lock); + printk(KERN_DEBUG "%s: using pre-allocated WDS netdevice %s\n", + local->dev->name, empty->dev->name); + return 0; + } + read_unlock_bh(&local->iface_lock); + + if (!prism2_wds_special_addr(remote_addr)) { + if (match) + return -EEXIST; + hostap_add_sta(local->ap, remote_addr); + } + + if (local->wds_connections >= local->wds_max_connections) + return -ENOBUFS; + + /* verify that there is room for wds# postfix in the interface name */ + if (strlen(local->dev->name) >= IFNAMSIZ - 5) { + printk(KERN_DEBUG "'%s' too long base device name\n", + local->dev->name); + return -EINVAL; + } + + dev = hostap_add_interface(local, HOSTAP_INTERFACE_WDS, rtnl_locked, + local->ddev->name, "wds%d"); + if (dev == NULL) + return -ENOMEM; + + iface = netdev_priv(dev); + memcpy(iface->u.wds.remote_addr, remote_addr, ETH_ALEN); + + local->wds_connections++; + + return 0; +} + + +int prism2_wds_del(local_info_t *local, u8 *remote_addr, + int rtnl_locked, int do_not_remove) +{ + unsigned long flags; + struct list_head *ptr; + struct hostap_interface *iface, *selected = NULL; + + write_lock_irqsave(&local->iface_lock, flags); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type != HOSTAP_INTERFACE_WDS) + continue; + + if (ether_addr_equal(iface->u.wds.remote_addr, remote_addr)) { + selected = iface; + break; + } + } + if (selected && !do_not_remove) + list_del(&selected->list); + write_unlock_irqrestore(&local->iface_lock, flags); + + if (selected) { + if (do_not_remove) + eth_zero_addr(selected->u.wds.remote_addr); + else { + hostap_remove_interface(selected->dev, rtnl_locked, 0); + local->wds_connections--; + } + } + + return selected ? 0 : -ENODEV; +} + + +u16 hostap_tx_callback_register(local_info_t *local, + void (*func)(struct sk_buff *, int ok, void *), + void *data) +{ + unsigned long flags; + struct hostap_tx_callback_info *entry; + + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (entry == NULL) + return 0; + + entry->func = func; + entry->data = data; + + spin_lock_irqsave(&local->lock, flags); + entry->idx = local->tx_callback ? local->tx_callback->idx + 1 : 1; + entry->next = local->tx_callback; + local->tx_callback = entry; + spin_unlock_irqrestore(&local->lock, flags); + + return entry->idx; +} + + +int hostap_tx_callback_unregister(local_info_t *local, u16 idx) +{ + unsigned long flags; + struct hostap_tx_callback_info *cb, *prev = NULL; + + spin_lock_irqsave(&local->lock, flags); + cb = local->tx_callback; + while (cb != NULL && cb->idx != idx) { + prev = cb; + cb = cb->next; + } + if (cb) { + if (prev == NULL) + local->tx_callback = cb->next; + else + prev->next = cb->next; + kfree(cb); + } + spin_unlock_irqrestore(&local->lock, flags); + + return cb ? 0 : -1; +} + + +/* val is in host byte order */ +int hostap_set_word(struct net_device *dev, int rid, u16 val) +{ + struct hostap_interface *iface; + __le16 tmp = cpu_to_le16(val); + iface = netdev_priv(dev); + return iface->local->func->set_rid(dev, rid, &tmp, 2); +} + + +int hostap_set_string(struct net_device *dev, int rid, const char *val) +{ + struct hostap_interface *iface; + char buf[MAX_SSID_LEN + 2]; + int len; + + iface = netdev_priv(dev); + len = strlen(val); + if (len > MAX_SSID_LEN) + return -1; + memset(buf, 0, sizeof(buf)); + buf[0] = len; /* little endian 16 bit word */ + memcpy(buf + 2, val, len); + + return iface->local->func->set_rid(dev, rid, &buf, MAX_SSID_LEN + 2); +} + + +u16 hostap_get_porttype(local_info_t *local) +{ + if (local->iw_mode == IW_MODE_ADHOC && local->pseudo_adhoc) + return HFA384X_PORTTYPE_PSEUDO_IBSS; + if (local->iw_mode == IW_MODE_ADHOC) + return HFA384X_PORTTYPE_IBSS; + if (local->iw_mode == IW_MODE_INFRA) + return HFA384X_PORTTYPE_BSS; + if (local->iw_mode == IW_MODE_REPEAT) + return HFA384X_PORTTYPE_WDS; + if (local->iw_mode == IW_MODE_MONITOR) + return HFA384X_PORTTYPE_PSEUDO_IBSS; + return HFA384X_PORTTYPE_HOSTAP; +} + + +int hostap_set_encryption(local_info_t *local) +{ + u16 val, old_val; + int i, keylen, len, idx; + char keybuf[WEP_KEY_LEN + 1]; + enum { NONE, WEP, OTHER } encrypt_type; + + idx = local->crypt_info.tx_keyidx; + if (local->crypt_info.crypt[idx] == NULL || + local->crypt_info.crypt[idx]->ops == NULL) + encrypt_type = NONE; + else if (strcmp(local->crypt_info.crypt[idx]->ops->name, "WEP") == 0) + encrypt_type = WEP; + else + encrypt_type = OTHER; + + if (local->func->get_rid(local->dev, HFA384X_RID_CNFWEPFLAGS, &val, 2, + 1) < 0) { + printk(KERN_DEBUG "Could not read current WEP flags.\n"); + goto fail; + } + le16_to_cpus(&val); + old_val = val; + + if (encrypt_type != NONE || local->privacy_invoked) + val |= HFA384X_WEPFLAGS_PRIVACYINVOKED; + else + val &= ~HFA384X_WEPFLAGS_PRIVACYINVOKED; + + if (local->open_wep || encrypt_type == NONE || + ((local->ieee_802_1x || local->wpa) && local->host_decrypt)) + val &= ~HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED; + else + val |= HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED; + + if ((encrypt_type != NONE || local->privacy_invoked) && + (encrypt_type == OTHER || local->host_encrypt)) + val |= HFA384X_WEPFLAGS_HOSTENCRYPT; + else + val &= ~HFA384X_WEPFLAGS_HOSTENCRYPT; + if ((encrypt_type != NONE || local->privacy_invoked) && + (encrypt_type == OTHER || local->host_decrypt)) + val |= HFA384X_WEPFLAGS_HOSTDECRYPT; + else + val &= ~HFA384X_WEPFLAGS_HOSTDECRYPT; + + if (val != old_val && + hostap_set_word(local->dev, HFA384X_RID_CNFWEPFLAGS, val)) { + printk(KERN_DEBUG "Could not write new WEP flags (0x%x)\n", + val); + goto fail; + } + + if (encrypt_type != WEP) + return 0; + + /* 104-bit support seems to require that all the keys are set to the + * same keylen */ + keylen = 6; /* first 5 octets */ + len = local->crypt_info.crypt[idx]->ops->get_key(keybuf, sizeof(keybuf), NULL, + local->crypt_info.crypt[idx]->priv); + if (idx >= 0 && idx < WEP_KEYS && len > 5) + keylen = WEP_KEY_LEN + 1; /* first 13 octets */ + + for (i = 0; i < WEP_KEYS; i++) { + memset(keybuf, 0, sizeof(keybuf)); + if (local->crypt_info.crypt[i]) { + (void) local->crypt_info.crypt[i]->ops->get_key( + keybuf, sizeof(keybuf), + NULL, local->crypt_info.crypt[i]->priv); + } + if (local->func->set_rid(local->dev, + HFA384X_RID_CNFDEFAULTKEY0 + i, + keybuf, keylen)) { + printk(KERN_DEBUG "Could not set key %d (len=%d)\n", + i, keylen); + goto fail; + } + } + if (hostap_set_word(local->dev, HFA384X_RID_CNFWEPDEFAULTKEYID, idx)) { + printk(KERN_DEBUG "Could not set default keyid %d\n", idx); + goto fail; + } + + return 0; + + fail: + printk(KERN_DEBUG "%s: encryption setup failed\n", local->dev->name); + return -1; +} + + +int hostap_set_antsel(local_info_t *local) +{ + u16 val; + int ret = 0; + + if (local->antsel_tx != HOSTAP_ANTSEL_DO_NOT_TOUCH && + local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF, + HFA386X_CR_TX_CONFIGURE, + NULL, &val) == 0) { + val &= ~(BIT(2) | BIT(1)); + switch (local->antsel_tx) { + case HOSTAP_ANTSEL_DIVERSITY: + val |= BIT(1); + break; + case HOSTAP_ANTSEL_LOW: + break; + case HOSTAP_ANTSEL_HIGH: + val |= BIT(2); + break; + } + + if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_TX_CONFIGURE, &val, NULL)) { + printk(KERN_INFO "%s: setting TX AntSel failed\n", + local->dev->name); + ret = -1; + } + } + + if (local->antsel_rx != HOSTAP_ANTSEL_DO_NOT_TOUCH && + local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF, + HFA386X_CR_RX_CONFIGURE, + NULL, &val) == 0) { + val &= ~(BIT(1) | BIT(0)); + switch (local->antsel_rx) { + case HOSTAP_ANTSEL_DIVERSITY: + break; + case HOSTAP_ANTSEL_LOW: + val |= BIT(0); + break; + case HOSTAP_ANTSEL_HIGH: + val |= BIT(0) | BIT(1); + break; + } + + if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_RX_CONFIGURE, &val, NULL)) { + printk(KERN_INFO "%s: setting RX AntSel failed\n", + local->dev->name); + ret = -1; + } + } + + return ret; +} + + +int hostap_set_roaming(local_info_t *local) +{ + u16 val; + + switch (local->host_roaming) { + case 1: + val = HFA384X_ROAMING_HOST; + break; + case 2: + val = HFA384X_ROAMING_DISABLED; + break; + case 0: + default: + val = HFA384X_ROAMING_FIRMWARE; + break; + } + + return hostap_set_word(local->dev, HFA384X_RID_CNFROAMINGMODE, val); +} + + +int hostap_set_auth_algs(local_info_t *local) +{ + int val = local->auth_algs; + /* At least STA f/w v0.6.2 seems to have issues with cnfAuthentication + * set to include both Open and Shared Key flags. It tries to use + * Shared Key authentication in that case even if WEP keys are not + * configured.. STA f/w v0.7.6 is able to handle such configuration, + * but it is unknown when this was fixed between 0.6.2 .. 0.7.6. */ + if (local->sta_fw_ver < PRISM2_FW_VER(0,7,0) && + val != PRISM2_AUTH_OPEN && val != PRISM2_AUTH_SHARED_KEY) + val = PRISM2_AUTH_OPEN; + + if (hostap_set_word(local->dev, HFA384X_RID_CNFAUTHENTICATION, val)) { + printk(KERN_INFO "%s: cnfAuthentication setting to 0x%x " + "failed\n", local->dev->name, local->auth_algs); + return -EINVAL; + } + + return 0; +} + + +void hostap_dump_rx_header(const char *name, const struct hfa384x_rx_frame *rx) +{ + u16 status, fc; + + status = __le16_to_cpu(rx->status); + + printk(KERN_DEBUG "%s: RX status=0x%04x (port=%d, type=%d, " + "fcserr=%d) silence=%d signal=%d rate=%d rxflow=%d; " + "jiffies=%ld\n", + name, status, (status >> 8) & 0x07, status >> 13, status & 1, + rx->silence, rx->signal, rx->rate, rx->rxflow, jiffies); + + fc = __le16_to_cpu(rx->frame_control); + printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " + "data_len=%d%s%s\n", + fc, (fc & IEEE80211_FCTL_FTYPE) >> 2, + (fc & IEEE80211_FCTL_STYPE) >> 4, + __le16_to_cpu(rx->duration_id), __le16_to_cpu(rx->seq_ctrl), + __le16_to_cpu(rx->data_len), + fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", + fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); + + printk(KERN_DEBUG " A1=%pM A2=%pM A3=%pM A4=%pM\n", + rx->addr1, rx->addr2, rx->addr3, rx->addr4); + + printk(KERN_DEBUG " dst=%pM src=%pM len=%d\n", + rx->dst_addr, rx->src_addr, + __be16_to_cpu(rx->len)); +} + + +void hostap_dump_tx_header(const char *name, const struct hfa384x_tx_frame *tx) +{ + u16 fc; + + printk(KERN_DEBUG "%s: TX status=0x%04x retry_count=%d tx_rate=%d " + "tx_control=0x%04x; jiffies=%ld\n", + name, __le16_to_cpu(tx->status), tx->retry_count, tx->tx_rate, + __le16_to_cpu(tx->tx_control), jiffies); + + fc = __le16_to_cpu(tx->frame_control); + printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " + "data_len=%d%s%s\n", + fc, (fc & IEEE80211_FCTL_FTYPE) >> 2, + (fc & IEEE80211_FCTL_STYPE) >> 4, + __le16_to_cpu(tx->duration_id), __le16_to_cpu(tx->seq_ctrl), + __le16_to_cpu(tx->data_len), + fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", + fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); + + printk(KERN_DEBUG " A1=%pM A2=%pM A3=%pM A4=%pM\n", + tx->addr1, tx->addr2, tx->addr3, tx->addr4); + + printk(KERN_DEBUG " dst=%pM src=%pM len=%d\n", + tx->dst_addr, tx->src_addr, + __be16_to_cpu(tx->len)); +} + + +static int hostap_80211_header_parse(const struct sk_buff *skb, + unsigned char *haddr) +{ + memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */ + return ETH_ALEN; +} + + +int hostap_80211_get_hdrlen(__le16 fc) +{ + if (ieee80211_is_data(fc) && ieee80211_has_a4 (fc)) + return 30; /* Addr4 */ + else if (ieee80211_is_cts(fc) || ieee80211_is_ack(fc)) + return 10; + else if (ieee80211_is_ctl(fc)) + return 16; + + return 24; +} + + +static int prism2_close(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + + PDEBUG(DEBUG_FLOW, "%s: prism2_close\n", dev->name); + + iface = netdev_priv(dev); + local = iface->local; + + if (dev == local->ddev) { + prism2_sta_deauth(local, WLAN_REASON_DEAUTH_LEAVING); + } +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (!local->hostapd && dev == local->dev && + (!local->func->card_present || local->func->card_present(local)) && + local->hw_ready && local->ap && local->iw_mode == IW_MODE_MASTER) + hostap_deauth_all_stas(dev, local->ap, 1); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + if (dev == local->dev) { + local->func->hw_shutdown(dev, HOSTAP_HW_ENABLE_CMDCOMPL); + } + + if (netif_running(dev)) { + netif_stop_queue(dev); + netif_device_detach(dev); + } + + cancel_work_sync(&local->reset_queue); + cancel_work_sync(&local->set_multicast_list_queue); + cancel_work_sync(&local->set_tim_queue); +#ifndef PRISM2_NO_STATION_MODES + cancel_work_sync(&local->info_queue); +#endif + cancel_work_sync(&local->comms_qual_update); + + module_put(local->hw_module); + + local->num_dev_open--; + + if (dev != local->dev && local->dev->flags & IFF_UP && + local->master_dev_auto_open && local->num_dev_open == 1) { + /* Close master radio interface automatically if it was also + * opened automatically and we are now closing the last + * remaining non-master device. */ + dev_close(local->dev); + } + + return 0; +} + + +static int prism2_open(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + + PDEBUG(DEBUG_FLOW, "%s: prism2_open\n", dev->name); + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + printk(KERN_DEBUG "%s: could not set interface UP - no PRI " + "f/w\n", dev->name); + return -ENODEV; + } + + if ((local->func->card_present && !local->func->card_present(local)) || + local->hw_downloading) + return -ENODEV; + + if (!try_module_get(local->hw_module)) + return -ENODEV; + local->num_dev_open++; + + if (!local->dev_enabled && local->func->hw_enable(dev, 1)) { + printk(KERN_WARNING "%s: could not enable MAC port\n", + dev->name); + prism2_close(dev); + return -ENODEV; + } + if (!local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_ENABLE); + local->dev_enabled = 1; + + if (dev != local->dev && !(local->dev->flags & IFF_UP)) { + /* Master radio interface is needed for all operation, so open + * it automatically when any virtual net_device is opened. */ + local->master_dev_auto_open = 1; + dev_open(local->dev); + } + + netif_device_attach(dev); + netif_start_queue(dev); + + return 0; +} + + +static int prism2_set_mac_address(struct net_device *dev, void *p) +{ + struct hostap_interface *iface; + local_info_t *local; + struct list_head *ptr; + struct sockaddr *addr = p; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->set_rid(dev, HFA384X_RID_CNFOWNMACADDR, addr->sa_data, + ETH_ALEN) < 0 || local->func->reset_port(dev)) + return -EINVAL; + + read_lock_bh(&local->iface_lock); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + memcpy(iface->dev->dev_addr, addr->sa_data, ETH_ALEN); + } + memcpy(local->dev->dev_addr, addr->sa_data, ETH_ALEN); + read_unlock_bh(&local->iface_lock); + + return 0; +} + + +/* TODO: to be further implemented as soon as Prism2 fully supports + * GroupAddresses and correct documentation is available */ +void hostap_set_multicast_list_queue(struct work_struct *work) +{ + local_info_t *local = + container_of(work, local_info_t, set_multicast_list_queue); + struct net_device *dev = local->dev; + + if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, + local->is_promisc)) { + printk(KERN_INFO "%s: %sabling promiscuous mode failed\n", + dev->name, local->is_promisc ? "en" : "dis"); + } +} + + +static void hostap_set_multicast_list(struct net_device *dev) +{ +#if 0 + /* FIX: promiscuous mode seems to be causing a lot of problems with + * some station firmware versions (FCSErr frames, invalid MACPort, etc. + * corrupted incoming frames). This code is now commented out while the + * problems are investigated. */ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + if ((dev->flags & IFF_ALLMULTI) || (dev->flags & IFF_PROMISC)) { + local->is_promisc = 1; + } else { + local->is_promisc = 0; + } + + schedule_work(&local->set_multicast_list_queue); +#endif +} + + +static int prism2_change_mtu(struct net_device *dev, int new_mtu) +{ + if (new_mtu < PRISM2_MIN_MTU || new_mtu > PRISM2_MAX_MTU) + return -EINVAL; + + dev->mtu = new_mtu; + return 0; +} + + +static void prism2_tx_timeout(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_regs regs; + + iface = netdev_priv(dev); + local = iface->local; + + printk(KERN_WARNING "%s Tx timed out! Resetting card\n", dev->name); + netif_stop_queue(local->dev); + + local->func->read_regs(dev, ®s); + printk(KERN_DEBUG "%s: CMD=%04x EVSTAT=%04x " + "OFFSET0=%04x OFFSET1=%04x SWSUPPORT0=%04x\n", + dev->name, regs.cmd, regs.evstat, regs.offset0, regs.offset1, + regs.swsupport0); + + local->func->schedule_reset(local); +} + +const struct header_ops hostap_80211_ops = { + .create = eth_header, + .cache = eth_header_cache, + .cache_update = eth_header_cache_update, + .parse = hostap_80211_header_parse, +}; +EXPORT_SYMBOL(hostap_80211_ops); + + +static const struct net_device_ops hostap_netdev_ops = { + .ndo_start_xmit = hostap_data_start_xmit, + + .ndo_open = prism2_open, + .ndo_stop = prism2_close, + .ndo_do_ioctl = hostap_ioctl, + .ndo_set_mac_address = prism2_set_mac_address, + .ndo_set_rx_mode = hostap_set_multicast_list, + .ndo_change_mtu = prism2_change_mtu, + .ndo_tx_timeout = prism2_tx_timeout, + .ndo_validate_addr = eth_validate_addr, +}; + +static const struct net_device_ops hostap_mgmt_netdev_ops = { + .ndo_start_xmit = hostap_mgmt_start_xmit, + + .ndo_open = prism2_open, + .ndo_stop = prism2_close, + .ndo_do_ioctl = hostap_ioctl, + .ndo_set_mac_address = prism2_set_mac_address, + .ndo_set_rx_mode = hostap_set_multicast_list, + .ndo_change_mtu = prism2_change_mtu, + .ndo_tx_timeout = prism2_tx_timeout, + .ndo_validate_addr = eth_validate_addr, +}; + +static const struct net_device_ops hostap_master_ops = { + .ndo_start_xmit = hostap_master_start_xmit, + + .ndo_open = prism2_open, + .ndo_stop = prism2_close, + .ndo_do_ioctl = hostap_ioctl, + .ndo_set_mac_address = prism2_set_mac_address, + .ndo_set_rx_mode = hostap_set_multicast_list, + .ndo_change_mtu = prism2_change_mtu, + .ndo_tx_timeout = prism2_tx_timeout, + .ndo_validate_addr = eth_validate_addr, +}; + +void hostap_setup_dev(struct net_device *dev, local_info_t *local, + int type) +{ + struct hostap_interface *iface; + + iface = netdev_priv(dev); + ether_setup(dev); + dev->priv_flags &= ~IFF_TX_SKB_SHARING; + + /* kernel callbacks */ + if (iface) { + /* Currently, we point to the proper spy_data only on + * the main_dev. This could be fixed. Jean II */ + iface->wireless_data.spy_data = &iface->spy_data; + dev->wireless_data = &iface->wireless_data; + } + dev->wireless_handlers = &hostap_iw_handler_def; + dev->watchdog_timeo = TX_TIMEOUT; + + switch(type) { + case HOSTAP_INTERFACE_AP: + dev->priv_flags |= IFF_NO_QUEUE; /* use main radio device queue */ + dev->netdev_ops = &hostap_mgmt_netdev_ops; + dev->type = ARPHRD_IEEE80211; + dev->header_ops = &hostap_80211_ops; + break; + case HOSTAP_INTERFACE_MASTER: + dev->netdev_ops = &hostap_master_ops; + break; + default: + dev->priv_flags |= IFF_NO_QUEUE; /* use main radio device queue */ + dev->netdev_ops = &hostap_netdev_ops; + } + + dev->mtu = local->mtu; + + + dev->ethtool_ops = &prism2_ethtool_ops; + +} + +static int hostap_enable_hostapd(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + if (local->apdev) + return -EEXIST; + + printk(KERN_DEBUG "%s: enabling hostapd mode\n", dev->name); + + local->apdev = hostap_add_interface(local, HOSTAP_INTERFACE_AP, + rtnl_locked, local->ddev->name, + "ap"); + if (local->apdev == NULL) + return -ENOMEM; + + return 0; +} + + +static int hostap_disable_hostapd(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); + + hostap_remove_interface(local->apdev, rtnl_locked, 1); + local->apdev = NULL; + + return 0; +} + + +static int hostap_enable_hostapd_sta(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + if (local->stadev) + return -EEXIST; + + printk(KERN_DEBUG "%s: enabling hostapd STA mode\n", dev->name); + + local->stadev = hostap_add_interface(local, HOSTAP_INTERFACE_STA, + rtnl_locked, local->ddev->name, + "sta"); + if (local->stadev == NULL) + return -ENOMEM; + + return 0; +} + + +static int hostap_disable_hostapd_sta(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); + + hostap_remove_interface(local->stadev, rtnl_locked, 1); + local->stadev = NULL; + + return 0; +} + + +int hostap_set_hostapd(local_info_t *local, int val, int rtnl_locked) +{ + int ret; + + if (val < 0 || val > 1) + return -EINVAL; + + if (local->hostapd == val) + return 0; + + if (val) { + ret = hostap_enable_hostapd(local, rtnl_locked); + if (ret == 0) + local->hostapd = 1; + } else { + local->hostapd = 0; + ret = hostap_disable_hostapd(local, rtnl_locked); + if (ret != 0) + local->hostapd = 1; + } + + return ret; +} + + +int hostap_set_hostapd_sta(local_info_t *local, int val, int rtnl_locked) +{ + int ret; + + if (val < 0 || val > 1) + return -EINVAL; + + if (local->hostapd_sta == val) + return 0; + + if (val) { + ret = hostap_enable_hostapd_sta(local, rtnl_locked); + if (ret == 0) + local->hostapd_sta = 1; + } else { + local->hostapd_sta = 0; + ret = hostap_disable_hostapd_sta(local, rtnl_locked); + if (ret != 0) + local->hostapd_sta = 1; + } + + + return ret; +} + + +int prism2_update_comms_qual(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret = 0; + struct hfa384x_comms_quality sq; + + iface = netdev_priv(dev); + local = iface->local; + if (!local->sta_fw_ver) + ret = -1; + else if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) { + if (local->func->get_rid(local->dev, + HFA384X_RID_DBMCOMMSQUALITY, + &sq, sizeof(sq), 1) >= 0) { + local->comms_qual = (s16) le16_to_cpu(sq.comm_qual); + local->avg_signal = (s16) le16_to_cpu(sq.signal_level); + local->avg_noise = (s16) le16_to_cpu(sq.noise_level); + local->last_comms_qual_update = jiffies; + } else + ret = -1; + } else { + if (local->func->get_rid(local->dev, HFA384X_RID_COMMSQUALITY, + &sq, sizeof(sq), 1) >= 0) { + local->comms_qual = le16_to_cpu(sq.comm_qual); + local->avg_signal = HFA384X_LEVEL_TO_dBm( + le16_to_cpu(sq.signal_level)); + local->avg_noise = HFA384X_LEVEL_TO_dBm( + le16_to_cpu(sq.noise_level)); + local->last_comms_qual_update = jiffies; + } else + ret = -1; + } + + return ret; +} + + +int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u16 stype, + u8 *body, size_t bodylen) +{ + struct sk_buff *skb; + struct hostap_ieee80211_mgmt *mgmt; + struct hostap_skb_tx_data *meta; + struct net_device *dev = local->dev; + + skb = dev_alloc_skb(IEEE80211_MGMT_HDR_LEN + bodylen); + if (skb == NULL) + return -ENOMEM; + + mgmt = (struct hostap_ieee80211_mgmt *) + skb_put(skb, IEEE80211_MGMT_HDR_LEN); + memset(mgmt, 0, IEEE80211_MGMT_HDR_LEN); + mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | stype); + memcpy(mgmt->da, dst, ETH_ALEN); + memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN); + memcpy(mgmt->bssid, dst, ETH_ALEN); + if (body) + memcpy(skb_put(skb, bodylen), body, bodylen); + + meta = (struct hostap_skb_tx_data *) skb->cb; + memset(meta, 0, sizeof(*meta)); + meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; + meta->iface = netdev_priv(dev); + + skb->dev = dev; + skb_reset_mac_header(skb); + skb_reset_network_header(skb); + dev_queue_xmit(skb); + + return 0; +} + + +int prism2_sta_deauth(local_info_t *local, u16 reason) +{ + union iwreq_data wrqu; + int ret; + __le16 val = cpu_to_le16(reason); + + if (local->iw_mode != IW_MODE_INFRA || + is_zero_ether_addr(local->bssid) || + ether_addr_equal(local->bssid, "\x44\x44\x44\x44\x44\x44")) + return 0; + + ret = prism2_sta_send_mgmt(local, local->bssid, IEEE80211_STYPE_DEAUTH, + (u8 *) &val, 2); + eth_zero_addr(wrqu.ap_addr.sa_data); + wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); + return ret; +} + + +struct proc_dir_entry *hostap_proc; + +static int __init hostap_init(void) +{ + if (init_net.proc_net != NULL) { + hostap_proc = proc_mkdir("hostap", init_net.proc_net); + if (!hostap_proc) + printk(KERN_WARNING "Failed to mkdir " + "/proc/net/hostap\n"); + } else + hostap_proc = NULL; + + return 0; +} + + +static void __exit hostap_exit(void) +{ + if (hostap_proc != NULL) { + hostap_proc = NULL; + remove_proc_entry("hostap", init_net.proc_net); + } +} + + +EXPORT_SYMBOL(hostap_set_word); +EXPORT_SYMBOL(hostap_set_string); +EXPORT_SYMBOL(hostap_get_porttype); +EXPORT_SYMBOL(hostap_set_encryption); +EXPORT_SYMBOL(hostap_set_antsel); +EXPORT_SYMBOL(hostap_set_roaming); +EXPORT_SYMBOL(hostap_set_auth_algs); +EXPORT_SYMBOL(hostap_dump_rx_header); +EXPORT_SYMBOL(hostap_dump_tx_header); +EXPORT_SYMBOL(hostap_80211_get_hdrlen); +EXPORT_SYMBOL(hostap_setup_dev); +EXPORT_SYMBOL(hostap_set_multicast_list_queue); +EXPORT_SYMBOL(hostap_set_hostapd); +EXPORT_SYMBOL(hostap_set_hostapd_sta); +EXPORT_SYMBOL(hostap_add_interface); +EXPORT_SYMBOL(hostap_remove_interface); +EXPORT_SYMBOL(prism2_update_comms_qual); + +module_init(hostap_init); +module_exit(hostap_exit); diff --git a/drivers/net/wireless/intersil/hostap/hostap_pci.c b/drivers/net/wireless/intersil/hostap/hostap_pci.c new file mode 100644 index 000000000..c864ef4b0 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_pci.c @@ -0,0 +1,459 @@ +#define PRISM2_PCI + +/* Host AP driver's support for Intersil Prism2.5 PCI cards is based on + * driver patches from Reyk Floeter <reyk@vantronix.net> and + * Andy Warner <andyw@pobox.com> */ + +#include <linux/module.h> +#include <linux/if.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> + +#include <linux/ioport.h> +#include <linux/pci.h> +#include <asm/io.h> + +#include "hostap_wlan.h" + + +static char *dev_info = "hostap_pci"; + + +MODULE_AUTHOR("Jouni Malinen"); +MODULE_DESCRIPTION("Support for Intersil Prism2.5-based 802.11 wireless LAN " + "PCI cards."); +MODULE_SUPPORTED_DEVICE("Intersil Prism2.5-based WLAN PCI cards"); +MODULE_LICENSE("GPL"); + + +/* struct local_info::hw_priv */ +struct hostap_pci_priv { + void __iomem *mem_start; +}; + + +/* FIX: do we need mb/wmb/rmb with memory operations? */ + + +static const struct pci_device_id prism2_pci_id_table[] = { + /* Intersil Prism3 ISL3872 11Mb/s WLAN Controller */ + { 0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID }, + /* Intersil Prism2.5 ISL3874 11Mb/s WLAN Controller */ + { 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID }, + /* Samsung MagicLAN SWL-2210P */ + { 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID }, + { 0 } +}; + + +#ifdef PRISM2_IO_DEBUG + +static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + hw_priv = local->hw_priv; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); + writeb(v, hw_priv->mem_start + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + local_info_t *local; + unsigned long flags; + u8 v; + + iface = netdev_priv(dev); + local = iface->local; + hw_priv = local->hw_priv; + + spin_lock_irqsave(&local->lock, flags); + v = readb(hw_priv->mem_start + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + hw_priv = local->hw_priv; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); + writew(v, hw_priv->mem_start + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + local_info_t *local; + unsigned long flags; + u16 v; + + iface = netdev_priv(dev); + local = iface->local; + hw_priv = local->hw_priv; + + spin_lock_irqsave(&local->lock, flags); + v = readw(hw_priv->mem_start + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v)) +#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a)) +#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v)) +#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a)) +#define HFA384X_OUTW_DATA(v,a) hfa384x_outw_debug(dev, (a), le16_to_cpu((v))) +#define HFA384X_INW_DATA(a) cpu_to_le16(hfa384x_inw_debug(dev, (a))) + +#else /* PRISM2_IO_DEBUG */ + +static inline void hfa384x_outb(struct net_device *dev, int a, u8 v) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + writeb(v, hw_priv->mem_start + a); +} + +static inline u8 hfa384x_inb(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + return readb(hw_priv->mem_start + a); +} + +static inline void hfa384x_outw(struct net_device *dev, int a, u16 v) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + writew(v, hw_priv->mem_start + a); +} + +static inline u16 hfa384x_inw(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + return readw(hw_priv->mem_start + a); +} + +#define HFA384X_OUTB(v,a) hfa384x_outb(dev, (a), (v)) +#define HFA384X_INB(a) hfa384x_inb(dev, (a)) +#define HFA384X_OUTW(v,a) hfa384x_outw(dev, (a), (v)) +#define HFA384X_INW(a) hfa384x_inw(dev, (a)) +#define HFA384X_OUTW_DATA(v,a) hfa384x_outw(dev, (a), le16_to_cpu((v))) +#define HFA384X_INW_DATA(a) cpu_to_le16(hfa384x_inw(dev, (a))) + +#endif /* PRISM2_IO_DEBUG */ + + +static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf, + int len) +{ + u16 d_off; + __le16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (__le16 *) buf; + + for ( ; len > 1; len -= 2) + *pos++ = HFA384X_INW_DATA(d_off); + + if (len & 1) + *((char *) pos) = HFA384X_INB(d_off); + + return 0; +} + + +static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len) +{ + u16 d_off; + __le16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (__le16 *) buf; + + for ( ; len > 1; len -= 2) + HFA384X_OUTW_DATA(*pos++, d_off); + + if (len & 1) + HFA384X_OUTB(*((char *) pos), d_off); + + return 0; +} + + +/* FIX: This might change at some point.. */ +#include "hostap_hw.c" + +static void prism2_pci_cor_sreset(local_info_t *local) +{ + struct net_device *dev = local->dev; + u16 reg; + + reg = HFA384X_INB(HFA384X_PCICOR_OFF); + printk(KERN_DEBUG "%s: Original COR value: 0x%0x\n", dev->name, reg); + + /* linux-wlan-ng uses extremely long hold and settle times for + * COR sreset. A comment in the driver code mentions that the long + * delays appear to be necessary. However, at least IBM 22P6901 seems + * to work fine with shorter delays. + * + * Longer delays can be configured by uncommenting following line: */ +/* #define PRISM2_PCI_USE_LONG_DELAYS */ + +#ifdef PRISM2_PCI_USE_LONG_DELAYS + int i; + + HFA384X_OUTW(reg | 0x0080, HFA384X_PCICOR_OFF); + mdelay(250); + + HFA384X_OUTW(reg & ~0x0080, HFA384X_PCICOR_OFF); + mdelay(500); + + /* Wait for f/w to complete initialization (CMD:BUSY == 0) */ + i = 2000000 / 10; + while ((HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY) && --i) + udelay(10); + +#else /* PRISM2_PCI_USE_LONG_DELAYS */ + + HFA384X_OUTW(reg | 0x0080, HFA384X_PCICOR_OFF); + mdelay(2); + HFA384X_OUTW(reg & ~0x0080, HFA384X_PCICOR_OFF); + mdelay(2); + +#endif /* PRISM2_PCI_USE_LONG_DELAYS */ + + if (HFA384X_INW(HFA384X_CMD_OFF) & HFA384X_CMD_BUSY) { + printk(KERN_DEBUG "%s: COR sreset timeout\n", dev->name); + } +} + + +static void prism2_pci_genesis_reset(local_info_t *local, int hcr) +{ + struct net_device *dev = local->dev; + + HFA384X_OUTW(0x00C5, HFA384X_PCICOR_OFF); + mdelay(10); + HFA384X_OUTW(hcr, HFA384X_PCIHCR_OFF); + mdelay(10); + HFA384X_OUTW(0x0045, HFA384X_PCICOR_OFF); + mdelay(10); +} + + +static struct prism2_helper_functions prism2_pci_funcs = +{ + .card_present = NULL, + .cor_sreset = prism2_pci_cor_sreset, + .genesis_reset = prism2_pci_genesis_reset, + .hw_type = HOSTAP_HW_PCI, +}; + + +static int prism2_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + unsigned long phymem; + void __iomem *mem = NULL; + local_info_t *local = NULL; + struct net_device *dev = NULL; + static int cards_found /* = 0 */; + int irq_registered = 0; + struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; + + hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL); + if (hw_priv == NULL) + return -ENOMEM; + + if (pci_enable_device(pdev)) + goto err_out_free; + + phymem = pci_resource_start(pdev, 0); + + if (!request_mem_region(phymem, pci_resource_len(pdev, 0), "Prism2")) { + printk(KERN_ERR "prism2: Cannot reserve PCI memory region\n"); + goto err_out_disable; + } + + mem = pci_ioremap_bar(pdev, 0); + if (mem == NULL) { + printk(KERN_ERR "prism2: Cannot remap PCI memory region\n") ; + goto fail; + } + + dev = prism2_init_local_data(&prism2_pci_funcs, cards_found, + &pdev->dev); + if (dev == NULL) + goto fail; + iface = netdev_priv(dev); + local = iface->local; + local->hw_priv = hw_priv; + cards_found++; + + dev->irq = pdev->irq; + hw_priv->mem_start = mem; + dev->base_addr = (unsigned long) mem; + + prism2_pci_cor_sreset(local); + + pci_set_drvdata(pdev, dev); + + if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name, + dev)) { + printk(KERN_WARNING "%s: request_irq failed\n", dev->name); + goto fail; + } else + irq_registered = 1; + + if (!local->pri_only && prism2_hw_config(dev, 1)) { + printk(KERN_DEBUG "%s: hardware initialization failed\n", + dev_info); + goto fail; + } + + printk(KERN_INFO "%s: Intersil Prism2.5 PCI: " + "mem=0x%lx, irq=%d\n", dev->name, phymem, dev->irq); + + return hostap_hw_ready(dev); + + fail: + if (irq_registered && dev) + free_irq(dev->irq, dev); + + if (mem) + iounmap(mem); + + release_mem_region(phymem, pci_resource_len(pdev, 0)); + + err_out_disable: + pci_disable_device(pdev); + prism2_free_local_data(dev); + + err_out_free: + kfree(hw_priv); + + return -ENODEV; +} + + +static void prism2_pci_remove(struct pci_dev *pdev) +{ + struct net_device *dev; + struct hostap_interface *iface; + void __iomem *mem_start; + struct hostap_pci_priv *hw_priv; + + dev = pci_get_drvdata(pdev); + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + + /* Reset the hardware, and ensure interrupts are disabled. */ + prism2_pci_cor_sreset(iface->local); + hfa384x_disable_interrupts(dev); + + if (dev->irq) + free_irq(dev->irq, dev); + + mem_start = hw_priv->mem_start; + prism2_free_local_data(dev); + kfree(hw_priv); + + iounmap(mem_start); + + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + pci_disable_device(pdev); +} + + +#ifdef CONFIG_PM +static int prism2_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (netif_running(dev)) { + netif_stop_queue(dev); + netif_device_detach(dev); + } + prism2_suspend(dev); + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int prism2_pci_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + int err; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s: pci_enable_device failed on resume\n", + dev->name); + return err; + } + pci_restore_state(pdev); + prism2_hw_config(dev, 0); + if (netif_running(dev)) { + netif_device_attach(dev); + netif_start_queue(dev); + } + + return 0; +} +#endif /* CONFIG_PM */ + + +MODULE_DEVICE_TABLE(pci, prism2_pci_id_table); + +static struct pci_driver prism2_pci_driver = { + .name = "hostap_pci", + .id_table = prism2_pci_id_table, + .probe = prism2_pci_probe, + .remove = prism2_pci_remove, +#ifdef CONFIG_PM + .suspend = prism2_pci_suspend, + .resume = prism2_pci_resume, +#endif /* CONFIG_PM */ +}; + +module_pci_driver(prism2_pci_driver); diff --git a/drivers/net/wireless/intersil/hostap/hostap_plx.c b/drivers/net/wireless/intersil/hostap/hostap_plx.c new file mode 100644 index 000000000..4901a99c6 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_plx.c @@ -0,0 +1,618 @@ +#define PRISM2_PLX + +/* Host AP driver's support for PC Cards on PCI adapters using PLX9052 is + * based on: + * - Host AP driver patch from james@madingley.org + * - linux-wlan-ng driver, Copyright (C) AbsoluteValue Systems, Inc. + */ + + +#include <linux/module.h> +#include <linux/if.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> + +#include <linux/ioport.h> +#include <linux/pci.h> +#include <asm/io.h> + +#include "hostap_wlan.h" + + +static char *dev_info = "hostap_plx"; + + +MODULE_AUTHOR("Jouni Malinen"); +MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN " + "cards (PLX)."); +MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PLX)"); +MODULE_LICENSE("GPL"); + + +static int ignore_cis; +module_param(ignore_cis, int, 0444); +MODULE_PARM_DESC(ignore_cis, "Do not verify manfid information in CIS"); + + +/* struct local_info::hw_priv */ +struct hostap_plx_priv { + void __iomem *attr_mem; + unsigned int cor_offset; +}; + + +#define PLX_MIN_ATTR_LEN 512 /* at least 2 x 256 is needed for CIS */ +#define COR_SRESET 0x80 +#define COR_LEVLREQ 0x40 +#define COR_ENABLE_FUNC 0x01 +/* PCI Configuration Registers */ +#define PLX_PCIIPR 0x3d /* PCI Interrupt Pin */ +/* Local Configuration Registers */ +#define PLX_INTCSR 0x4c /* Interrupt Control/Status Register */ +#define PLX_INTCSR_PCI_INTEN BIT(6) /* PCI Interrupt Enable */ +#define PLX_CNTRL 0x50 +#define PLX_CNTRL_SERIAL_EEPROM_PRESENT BIT(28) + + +#define PLXDEV(vendor,dev,str) { vendor, dev, PCI_ANY_ID, PCI_ANY_ID } + +static const struct pci_device_id prism2_plx_id_table[] = { + PLXDEV(0x10b7, 0x7770, "3Com AirConnect PCI 777A"), + PLXDEV(0x111a, 0x1023, "Siemens SpeedStream SS1023"), + PLXDEV(0x126c, 0x8030, "Nortel emobility"), + PLXDEV(0x1562, 0x0001, "Symbol LA-4123"), + PLXDEV(0x1385, 0x4100, "Netgear MA301"), + PLXDEV(0x15e8, 0x0130, "National Datacomm NCP130 (PLX9052)"), + PLXDEV(0x15e8, 0x0131, "National Datacomm NCP130 (TMD7160)"), + PLXDEV(0x1638, 0x1100, "Eumitcom WL11000"), + PLXDEV(0x16ab, 0x1100, "Global Sun Tech GL24110P"), + PLXDEV(0x16ab, 0x1101, "Global Sun Tech GL24110P (?)"), + PLXDEV(0x16ab, 0x1102, "Linksys WPC11 with WDT11"), + PLXDEV(0x16ab, 0x1103, "Longshine 8031"), + PLXDEV(0x16ec, 0x3685, "US Robotics USR2415"), + PLXDEV(0xec80, 0xec00, "Belkin F5D6000"), + { 0 } +}; + + +/* Array of known Prism2/2.5 PC Card manufactured ids. If your card's manfid + * is not listed here, you will need to add it here to get the driver + * initialized. */ +static struct prism2_plx_manfid { + u16 manfid1, manfid2; +} prism2_plx_known_manfids[] = { + { 0x000b, 0x7110 } /* D-Link DWL-650 Rev. P1 */, + { 0x000b, 0x7300 } /* Philips 802.11b WLAN PCMCIA */, + { 0x0101, 0x0777 } /* 3Com AirConnect PCI 777A */, + { 0x0126, 0x8000 } /* Proxim RangeLAN */, + { 0x0138, 0x0002 } /* Compaq WL100 */, + { 0x0156, 0x0002 } /* Intersil Prism II Ref. Design (and others) */, + { 0x026f, 0x030b } /* Buffalo WLI-CF-S11G */, + { 0x0274, 0x1612 } /* Linksys WPC11 Ver 2.5 */, + { 0x0274, 0x1613 } /* Linksys WPC11 Ver 3 */, + { 0x028a, 0x0002 } /* D-Link DRC-650 */, + { 0x0250, 0x0002 } /* Samsung SWL2000-N */, + { 0xc250, 0x0002 } /* EMTAC A2424i */, + { 0xd601, 0x0002 } /* Z-Com XI300 */, + { 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */, + { 0, 0} +}; + + +#ifdef PRISM2_IO_DEBUG + +static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); + outb(v, dev->base_addr + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u8 v; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + v = inb(dev->base_addr + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); + outw(v, dev->base_addr + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u16 v; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + v = inw(dev->base_addr + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outsw_debug(struct net_device *dev, int a, + u8 *buf, int wc) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc); + outsw(dev->base_addr + a, buf, wc); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline void hfa384x_insw_debug(struct net_device *dev, int a, + u8 *buf, int wc) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc); + insw(dev->base_addr + a, buf, wc); + spin_unlock_irqrestore(&local->lock, flags); +} + +#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v)) +#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a)) +#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v)) +#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a)) +#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc)) +#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc)) + +#else /* PRISM2_IO_DEBUG */ + +#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a)) +#define HFA384X_INB(a) inb(dev->base_addr + (a)) +#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a)) +#define HFA384X_INW(a) inw(dev->base_addr + (a)) +#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc) +#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc) + +#endif /* PRISM2_IO_DEBUG */ + + +static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf, + int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + if (len / 2) + HFA384X_INSW(d_off, buf, len / 2); + pos += len / 2; + + if (len & 1) + *((char *) pos) = HFA384X_INB(d_off); + + return 0; +} + + +static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + if (len / 2) + HFA384X_OUTSW(d_off, buf, len / 2); + pos += len / 2; + + if (len & 1) + HFA384X_OUTB(*((char *) pos), d_off); + + return 0; +} + + +/* FIX: This might change at some point.. */ +#include "hostap_hw.c" + + +static void prism2_plx_cor_sreset(local_info_t *local) +{ + unsigned char corsave; + struct hostap_plx_priv *hw_priv = local->hw_priv; + + printk(KERN_DEBUG "%s: Doing reset via direct COR access.\n", + dev_info); + + /* Set sreset bit of COR and clear it after hold time */ + + if (hw_priv->attr_mem == NULL) { + /* TMD7160 - COR at card's first I/O addr */ + corsave = inb(hw_priv->cor_offset); + outb(corsave | COR_SRESET, hw_priv->cor_offset); + mdelay(2); + outb(corsave & ~COR_SRESET, hw_priv->cor_offset); + mdelay(2); + } else { + /* PLX9052 */ + corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset); + writeb(corsave | COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(2); + writeb(corsave & ~COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(2); + } +} + + +static void prism2_plx_genesis_reset(local_info_t *local, int hcr) +{ + unsigned char corsave; + struct hostap_plx_priv *hw_priv = local->hw_priv; + + if (hw_priv->attr_mem == NULL) { + /* TMD7160 - COR at card's first I/O addr */ + corsave = inb(hw_priv->cor_offset); + outb(corsave | COR_SRESET, hw_priv->cor_offset); + mdelay(10); + outb(hcr, hw_priv->cor_offset + 2); + mdelay(10); + outb(corsave & ~COR_SRESET, hw_priv->cor_offset); + mdelay(10); + } else { + /* PLX9052 */ + corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset); + writeb(corsave | COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(10); + writeb(hcr, hw_priv->attr_mem + hw_priv->cor_offset + 2); + mdelay(10); + writeb(corsave & ~COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(10); + } +} + + +static struct prism2_helper_functions prism2_plx_funcs = +{ + .card_present = NULL, + .cor_sreset = prism2_plx_cor_sreset, + .genesis_reset = prism2_plx_genesis_reset, + .hw_type = HOSTAP_HW_PLX, +}; + + +static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len, + unsigned int *cor_offset, + unsigned int *cor_index) +{ +#define CISTPL_CONFIG 0x1A +#define CISTPL_MANFID 0x20 +#define CISTPL_END 0xFF +#define CIS_MAX_LEN 256 + u8 *cis; + int i, pos; + unsigned int rmsz, rasz, manfid1, manfid2; + struct prism2_plx_manfid *manfid; + + cis = kmalloc(CIS_MAX_LEN, GFP_KERNEL); + if (cis == NULL) + return -ENOMEM; + + /* read CIS; it is in even offsets in the beginning of attr_mem */ + for (i = 0; i < CIS_MAX_LEN; i++) + cis[i] = readb(attr_mem + 2 * i); + printk(KERN_DEBUG "%s: CIS: %02x %02x %02x %02x %02x %02x ...\n", + dev_info, cis[0], cis[1], cis[2], cis[3], cis[4], cis[5]); + + /* set reasonable defaults for Prism2 cards just in case CIS parsing + * fails */ + *cor_offset = 0x3e0; + *cor_index = 0x01; + manfid1 = manfid2 = 0; + + pos = 0; + while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) { + if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN) + goto cis_error; + + switch (cis[pos]) { + case CISTPL_CONFIG: + if (cis[pos + 1] < 2) + goto cis_error; + rmsz = (cis[pos + 2] & 0x3c) >> 2; + rasz = cis[pos + 2] & 0x03; + if (4 + rasz + rmsz > cis[pos + 1]) + goto cis_error; + *cor_index = cis[pos + 3] & 0x3F; + *cor_offset = 0; + for (i = 0; i <= rasz; i++) + *cor_offset += cis[pos + 4 + i] << (8 * i); + printk(KERN_DEBUG "%s: cor_index=0x%x " + "cor_offset=0x%x\n", dev_info, + *cor_index, *cor_offset); + if (*cor_offset > attr_len) { + printk(KERN_ERR "%s: COR offset not within " + "attr_mem\n", dev_info); + kfree(cis); + return -1; + } + break; + + case CISTPL_MANFID: + if (cis[pos + 1] < 4) + goto cis_error; + manfid1 = cis[pos + 2] + (cis[pos + 3] << 8); + manfid2 = cis[pos + 4] + (cis[pos + 5] << 8); + printk(KERN_DEBUG "%s: manfid=0x%04x, 0x%04x\n", + dev_info, manfid1, manfid2); + break; + } + + pos += cis[pos + 1] + 2; + } + + if (pos >= CIS_MAX_LEN || cis[pos] != CISTPL_END) + goto cis_error; + + for (manfid = prism2_plx_known_manfids; manfid->manfid1 != 0; manfid++) + if (manfid1 == manfid->manfid1 && manfid2 == manfid->manfid2) { + kfree(cis); + return 0; + } + + printk(KERN_INFO "%s: unknown manfid 0x%04x, 0x%04x - assuming this is" + " not supported card\n", dev_info, manfid1, manfid2); + goto fail; + + cis_error: + printk(KERN_WARNING "%s: invalid CIS data\n", dev_info); + + fail: + kfree(cis); + if (ignore_cis) { + printk(KERN_INFO "%s: ignore_cis parameter set - ignoring " + "errors during CIS verification\n", dev_info); + return 0; + } + return -1; +} + + +static int prism2_plx_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + unsigned int pccard_ioaddr, plx_ioaddr; + unsigned long pccard_attr_mem; + unsigned int pccard_attr_len; + void __iomem *attr_mem = NULL; + unsigned int cor_offset = 0, cor_index = 0; + u32 reg; + local_info_t *local = NULL; + struct net_device *dev = NULL; + struct hostap_interface *iface; + static int cards_found /* = 0 */; + int irq_registered = 0; + int tmd7160; + struct hostap_plx_priv *hw_priv; + + hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL); + if (hw_priv == NULL) + return -ENOMEM; + + if (pci_enable_device(pdev)) + goto err_out_free; + + /* National Datacomm NCP130 based on TMD7160, not PLX9052. */ + tmd7160 = (pdev->vendor == 0x15e8) && (pdev->device == 0x0131); + + plx_ioaddr = pci_resource_start(pdev, 1); + pccard_ioaddr = pci_resource_start(pdev, tmd7160 ? 2 : 3); + + if (tmd7160) { + /* TMD7160 */ + attr_mem = NULL; /* no access to PC Card attribute memory */ + + printk(KERN_INFO "TMD7160 PCI/PCMCIA adapter: io=0x%x, " + "irq=%d, pccard_io=0x%x\n", + plx_ioaddr, pdev->irq, pccard_ioaddr); + + cor_offset = plx_ioaddr; + cor_index = 0x04; + + outb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, plx_ioaddr); + mdelay(1); + reg = inb(plx_ioaddr); + if (reg != (cor_index | COR_LEVLREQ | COR_ENABLE_FUNC)) { + printk(KERN_ERR "%s: Error setting COR (expected=" + "0x%02x, was=0x%02x)\n", dev_info, + cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, reg); + goto fail; + } + } else { + /* PLX9052 */ + pccard_attr_mem = pci_resource_start(pdev, 2); + pccard_attr_len = pci_resource_len(pdev, 2); + if (pccard_attr_len < PLX_MIN_ATTR_LEN) + goto fail; + + + attr_mem = ioremap(pccard_attr_mem, pccard_attr_len); + if (attr_mem == NULL) { + printk(KERN_ERR "%s: cannot remap attr_mem\n", + dev_info); + goto fail; + } + + printk(KERN_INFO "PLX9052 PCI/PCMCIA adapter: " + "mem=0x%lx, plx_io=0x%x, irq=%d, pccard_io=0x%x\n", + pccard_attr_mem, plx_ioaddr, pdev->irq, pccard_ioaddr); + + if (prism2_plx_check_cis(attr_mem, pccard_attr_len, + &cor_offset, &cor_index)) { + printk(KERN_INFO "Unknown PC Card CIS - not a " + "Prism2/2.5 card?\n"); + goto fail; + } + + printk(KERN_DEBUG "Prism2/2.5 PC Card detected in PLX9052 " + "adapter\n"); + + /* Write COR to enable PC Card */ + writeb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, + attr_mem + cor_offset); + + /* Enable PCI interrupts if they are not already enabled */ + reg = inl(plx_ioaddr + PLX_INTCSR); + printk(KERN_DEBUG "PLX_INTCSR=0x%x\n", reg); + if (!(reg & PLX_INTCSR_PCI_INTEN)) { + outl(reg | PLX_INTCSR_PCI_INTEN, + plx_ioaddr + PLX_INTCSR); + if (!(inl(plx_ioaddr + PLX_INTCSR) & + PLX_INTCSR_PCI_INTEN)) { + printk(KERN_WARNING "%s: Could not enable " + "Local Interrupts\n", dev_info); + goto fail; + } + } + + reg = inl(plx_ioaddr + PLX_CNTRL); + printk(KERN_DEBUG "PLX_CNTRL=0x%x (Serial EEPROM " + "present=%d)\n", + reg, (reg & PLX_CNTRL_SERIAL_EEPROM_PRESENT) != 0); + /* should set PLX_PCIIPR to 0x01 (INTA#) if Serial EEPROM is + * not present; but are there really such cards in use(?) */ + } + + dev = prism2_init_local_data(&prism2_plx_funcs, cards_found, + &pdev->dev); + if (dev == NULL) + goto fail; + iface = netdev_priv(dev); + local = iface->local; + local->hw_priv = hw_priv; + cards_found++; + + dev->irq = pdev->irq; + dev->base_addr = pccard_ioaddr; + hw_priv->attr_mem = attr_mem; + hw_priv->cor_offset = cor_offset; + + pci_set_drvdata(pdev, dev); + + if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name, + dev)) { + printk(KERN_WARNING "%s: request_irq failed\n", dev->name); + goto fail; + } else + irq_registered = 1; + + if (prism2_hw_config(dev, 1)) { + printk(KERN_DEBUG "%s: hardware initialization failed\n", + dev_info); + goto fail; + } + + return hostap_hw_ready(dev); + + fail: + if (irq_registered && dev) + free_irq(dev->irq, dev); + + if (attr_mem) + iounmap(attr_mem); + + pci_disable_device(pdev); + prism2_free_local_data(dev); + + err_out_free: + kfree(hw_priv); + + return -ENODEV; +} + + +static void prism2_plx_remove(struct pci_dev *pdev) +{ + struct net_device *dev; + struct hostap_interface *iface; + struct hostap_plx_priv *hw_priv; + + dev = pci_get_drvdata(pdev); + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + + /* Reset the hardware, and ensure interrupts are disabled. */ + prism2_plx_cor_sreset(iface->local); + hfa384x_disable_interrupts(dev); + + if (hw_priv->attr_mem) + iounmap(hw_priv->attr_mem); + if (dev->irq) + free_irq(dev->irq, dev); + + prism2_free_local_data(dev); + kfree(hw_priv); + pci_disable_device(pdev); +} + + +MODULE_DEVICE_TABLE(pci, prism2_plx_id_table); + +static struct pci_driver prism2_plx_driver = { + .name = "hostap_plx", + .id_table = prism2_plx_id_table, + .probe = prism2_plx_probe, + .remove = prism2_plx_remove, +}; + +module_pci_driver(prism2_plx_driver); diff --git a/drivers/net/wireless/intersil/hostap/hostap_proc.c b/drivers/net/wireless/intersil/hostap/hostap_proc.c new file mode 100644 index 000000000..dd84557cf --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_proc.c @@ -0,0 +1,499 @@ +/* /proc routines for Host AP driver */ + +#include <linux/types.h> +#include <linux/proc_fs.h> +#include <linux/export.h> +#include <net/lib80211.h> + +#include "hostap_wlan.h" +#include "hostap.h" + +#define PROC_LIMIT (PAGE_SIZE - 80) + + +#ifndef PRISM2_NO_PROCFS_DEBUG +static int prism2_debug_proc_show(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + int i; + + seq_printf(m, "next_txfid=%d next_alloc=%d\n", + local->next_txfid, local->next_alloc); + for (i = 0; i < PRISM2_TXFID_COUNT; i++) + seq_printf(m, "FID: tx=%04X intransmit=%04X\n", + local->txfid[i], local->intransmitfid[i]); + seq_printf(m, "FW TX rate control: %d\n", local->fw_tx_rate_control); + seq_printf(m, "beacon_int=%d\n", local->beacon_int); + seq_printf(m, "dtim_period=%d\n", local->dtim_period); + seq_printf(m, "wds_max_connections=%d\n", local->wds_max_connections); + seq_printf(m, "dev_enabled=%d\n", local->dev_enabled); + seq_printf(m, "sw_tick_stuck=%d\n", local->sw_tick_stuck); + for (i = 0; i < WEP_KEYS; i++) { + if (local->crypt_info.crypt[i] && + local->crypt_info.crypt[i]->ops) { + seq_printf(m, "crypt[%d]=%s\n", i, + local->crypt_info.crypt[i]->ops->name); + } + } + seq_printf(m, "pri_only=%d\n", local->pri_only); + seq_printf(m, "pci=%d\n", local->func->hw_type == HOSTAP_HW_PCI); + seq_printf(m, "sram_type=%d\n", local->sram_type); + seq_printf(m, "no_pri=%d\n", local->no_pri); + + return 0; +} + +static int prism2_debug_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, prism2_debug_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations prism2_debug_proc_fops = { + .open = prism2_debug_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif /* PRISM2_NO_PROCFS_DEBUG */ + + +static int prism2_stats_proc_show(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + struct comm_tallies_sums *sums = &local->comm_tallies; + + seq_printf(m, "TxUnicastFrames=%u\n", sums->tx_unicast_frames); + seq_printf(m, "TxMulticastframes=%u\n", sums->tx_multicast_frames); + seq_printf(m, "TxFragments=%u\n", sums->tx_fragments); + seq_printf(m, "TxUnicastOctets=%u\n", sums->tx_unicast_octets); + seq_printf(m, "TxMulticastOctets=%u\n", sums->tx_multicast_octets); + seq_printf(m, "TxDeferredTransmissions=%u\n", + sums->tx_deferred_transmissions); + seq_printf(m, "TxSingleRetryFrames=%u\n", sums->tx_single_retry_frames); + seq_printf(m, "TxMultipleRetryFrames=%u\n", + sums->tx_multiple_retry_frames); + seq_printf(m, "TxRetryLimitExceeded=%u\n", + sums->tx_retry_limit_exceeded); + seq_printf(m, "TxDiscards=%u\n", sums->tx_discards); + seq_printf(m, "RxUnicastFrames=%u\n", sums->rx_unicast_frames); + seq_printf(m, "RxMulticastFrames=%u\n", sums->rx_multicast_frames); + seq_printf(m, "RxFragments=%u\n", sums->rx_fragments); + seq_printf(m, "RxUnicastOctets=%u\n", sums->rx_unicast_octets); + seq_printf(m, "RxMulticastOctets=%u\n", sums->rx_multicast_octets); + seq_printf(m, "RxFCSErrors=%u\n", sums->rx_fcs_errors); + seq_printf(m, "RxDiscardsNoBuffer=%u\n", sums->rx_discards_no_buffer); + seq_printf(m, "TxDiscardsWrongSA=%u\n", sums->tx_discards_wrong_sa); + seq_printf(m, "RxDiscardsWEPUndecryptable=%u\n", + sums->rx_discards_wep_undecryptable); + seq_printf(m, "RxMessageInMsgFragments=%u\n", + sums->rx_message_in_msg_fragments); + seq_printf(m, "RxMessageInBadMsgFragments=%u\n", + sums->rx_message_in_bad_msg_fragments); + /* FIX: this may grow too long for one page(?) */ + + return 0; +} + +static int prism2_stats_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, prism2_stats_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations prism2_stats_proc_fops = { + .open = prism2_stats_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + + +static int prism2_wds_proc_show(struct seq_file *m, void *v) +{ + struct list_head *ptr = v; + struct hostap_interface *iface; + + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type == HOSTAP_INTERFACE_WDS) + seq_printf(m, "%s\t%pM\n", + iface->dev->name, iface->u.wds.remote_addr); + return 0; +} + +static void *prism2_wds_proc_start(struct seq_file *m, loff_t *_pos) +{ + local_info_t *local = m->private; + read_lock_bh(&local->iface_lock); + return seq_list_start(&local->hostap_interfaces, *_pos); +} + +static void *prism2_wds_proc_next(struct seq_file *m, void *v, loff_t *_pos) +{ + local_info_t *local = m->private; + return seq_list_next(v, &local->hostap_interfaces, _pos); +} + +static void prism2_wds_proc_stop(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + read_unlock_bh(&local->iface_lock); +} + +static const struct seq_operations prism2_wds_proc_seqops = { + .start = prism2_wds_proc_start, + .next = prism2_wds_proc_next, + .stop = prism2_wds_proc_stop, + .show = prism2_wds_proc_show, +}; + +static int prism2_wds_proc_open(struct inode *inode, struct file *file) +{ + int ret = seq_open(file, &prism2_wds_proc_seqops); + if (ret == 0) { + struct seq_file *m = file->private_data; + m->private = PDE_DATA(inode); + } + return ret; +} + +static const struct file_operations prism2_wds_proc_fops = { + .open = prism2_wds_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + + +static int prism2_bss_list_proc_show(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + struct list_head *ptr = v; + struct hostap_bss_info *bss; + + if (ptr == &local->bss_list) { + seq_printf(m, "#BSSID\tlast_update\tcount\tcapab_info\tSSID(txt)\t" + "SSID(hex)\tWPA IE\n"); + return 0; + } + + bss = list_entry(ptr, struct hostap_bss_info, list); + seq_printf(m, "%pM\t%lu\t%u\t0x%x\t", + bss->bssid, bss->last_update, + bss->count, bss->capab_info); + + seq_printf(m, "%*pE", (int)bss->ssid_len, bss->ssid); + + seq_putc(m, '\t'); + seq_printf(m, "%*phN", (int)bss->ssid_len, bss->ssid); + seq_putc(m, '\t'); + seq_printf(m, "%*phN", (int)bss->wpa_ie_len, bss->wpa_ie); + seq_putc(m, '\n'); + return 0; +} + +static void *prism2_bss_list_proc_start(struct seq_file *m, loff_t *_pos) +{ + local_info_t *local = m->private; + spin_lock_bh(&local->lock); + return seq_list_start_head(&local->bss_list, *_pos); +} + +static void *prism2_bss_list_proc_next(struct seq_file *m, void *v, loff_t *_pos) +{ + local_info_t *local = m->private; + return seq_list_next(v, &local->bss_list, _pos); +} + +static void prism2_bss_list_proc_stop(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + spin_unlock_bh(&local->lock); +} + +static const struct seq_operations prism2_bss_list_proc_seqops = { + .start = prism2_bss_list_proc_start, + .next = prism2_bss_list_proc_next, + .stop = prism2_bss_list_proc_stop, + .show = prism2_bss_list_proc_show, +}; + +static int prism2_bss_list_proc_open(struct inode *inode, struct file *file) +{ + int ret = seq_open(file, &prism2_bss_list_proc_seqops); + if (ret == 0) { + struct seq_file *m = file->private_data; + m->private = PDE_DATA(inode); + } + return ret; +} + +static const struct file_operations prism2_bss_list_proc_fops = { + .open = prism2_bss_list_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + + +static int prism2_crypt_proc_show(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + int i; + + seq_printf(m, "tx_keyidx=%d\n", local->crypt_info.tx_keyidx); + for (i = 0; i < WEP_KEYS; i++) { + if (local->crypt_info.crypt[i] && + local->crypt_info.crypt[i]->ops && + local->crypt_info.crypt[i]->ops->print_stats) { + local->crypt_info.crypt[i]->ops->print_stats( + m, local->crypt_info.crypt[i]->priv); + } + } + return 0; +} + +static int prism2_crypt_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, prism2_crypt_proc_show, PDE_DATA(inode)); +} + +static const struct file_operations prism2_crypt_proc_fops = { + .open = prism2_crypt_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + + +static ssize_t prism2_pda_proc_read(struct file *file, char __user *buf, + size_t count, loff_t *_pos) +{ + local_info_t *local = PDE_DATA(file_inode(file)); + size_t off; + + if (local->pda == NULL || *_pos >= PRISM2_PDA_SIZE) + return 0; + + off = *_pos; + if (count > PRISM2_PDA_SIZE - off) + count = PRISM2_PDA_SIZE - off; + if (copy_to_user(buf, local->pda + off, count) != 0) + return -EFAULT; + *_pos += count; + return count; +} + +static const struct file_operations prism2_pda_proc_fops = { + .read = prism2_pda_proc_read, + .llseek = generic_file_llseek, +}; + + +static ssize_t prism2_aux_dump_proc_no_read(struct file *file, char __user *buf, + size_t bufsize, loff_t *_pos) +{ + return 0; +} + +static const struct file_operations prism2_aux_dump_proc_fops = { + .read = prism2_aux_dump_proc_no_read, +}; + + +#ifdef PRISM2_IO_DEBUG +static int prism2_io_debug_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + local_info_t *local = (local_info_t *) data; + int head = local->io_debug_head; + int start_bytes, left, copy, copied; + + if (off + count > PRISM2_IO_DEBUG_SIZE * 4) { + *eof = 1; + if (off >= PRISM2_IO_DEBUG_SIZE * 4) + return 0; + count = PRISM2_IO_DEBUG_SIZE * 4 - off; + } + + copied = 0; + start_bytes = (PRISM2_IO_DEBUG_SIZE - head) * 4; + left = count; + + if (off < start_bytes) { + copy = start_bytes - off; + if (copy > count) + copy = count; + memcpy(page, ((u8 *) &local->io_debug[head]) + off, copy); + left -= copy; + if (left > 0) + memcpy(&page[copy], local->io_debug, left); + } else { + memcpy(page, ((u8 *) local->io_debug) + (off - start_bytes), + left); + } + + *start = page; + + return count; +} +#endif /* PRISM2_IO_DEBUG */ + + +#ifndef PRISM2_NO_STATION_MODES +static int prism2_scan_results_proc_show(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + unsigned long entry; + int i, len; + struct hfa384x_hostscan_result *scanres; + u8 *p; + + if (v == SEQ_START_TOKEN) { + seq_printf(m, + "CHID ANL SL BcnInt Capab Rate BSSID ATIM SupRates SSID\n"); + return 0; + } + + entry = (unsigned long)v - 2; + scanres = &local->last_scan_results[entry]; + + seq_printf(m, "%d %d %d %d 0x%02x %d %pM %d ", + le16_to_cpu(scanres->chid), + (s16) le16_to_cpu(scanres->anl), + (s16) le16_to_cpu(scanres->sl), + le16_to_cpu(scanres->beacon_interval), + le16_to_cpu(scanres->capability), + le16_to_cpu(scanres->rate), + scanres->bssid, + le16_to_cpu(scanres->atim)); + + p = scanres->sup_rates; + for (i = 0; i < sizeof(scanres->sup_rates); i++) { + if (p[i] == 0) + break; + seq_printf(m, "<%02x>", p[i]); + } + seq_putc(m, ' '); + + p = scanres->ssid; + len = le16_to_cpu(scanres->ssid_len); + if (len > 32) + len = 32; + for (i = 0; i < len; i++) { + unsigned char c = p[i]; + if (c >= 32 && c < 127) + seq_putc(m, c); + else + seq_printf(m, "<%02x>", c); + } + seq_putc(m, '\n'); + return 0; +} + +static void *prism2_scan_results_proc_start(struct seq_file *m, loff_t *_pos) +{ + local_info_t *local = m->private; + spin_lock_bh(&local->lock); + + /* We have a header (pos 0) + N results to show (pos 1...N) */ + if (*_pos > local->last_scan_results_count) + return NULL; + return (void *)(unsigned long)(*_pos + 1); /* 0 would be EOF */ +} + +static void *prism2_scan_results_proc_next(struct seq_file *m, void *v, loff_t *_pos) +{ + local_info_t *local = m->private; + + ++*_pos; + if (*_pos > local->last_scan_results_count) + return NULL; + return (void *)(unsigned long)(*_pos + 1); /* 0 would be EOF */ +} + +static void prism2_scan_results_proc_stop(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + spin_unlock_bh(&local->lock); +} + +static const struct seq_operations prism2_scan_results_proc_seqops = { + .start = prism2_scan_results_proc_start, + .next = prism2_scan_results_proc_next, + .stop = prism2_scan_results_proc_stop, + .show = prism2_scan_results_proc_show, +}; + +static int prism2_scan_results_proc_open(struct inode *inode, struct file *file) +{ + int ret = seq_open(file, &prism2_scan_results_proc_seqops); + if (ret == 0) { + struct seq_file *m = file->private_data; + m->private = PDE_DATA(inode); + } + return ret; +} + +static const struct file_operations prism2_scan_results_proc_fops = { + .open = prism2_scan_results_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + + +#endif /* PRISM2_NO_STATION_MODES */ + + +void hostap_init_proc(local_info_t *local) +{ + local->proc = NULL; + + if (hostap_proc == NULL) { + printk(KERN_WARNING "%s: hostap proc directory not created\n", + local->dev->name); + return; + } + + local->proc = proc_mkdir(local->ddev->name, hostap_proc); + if (local->proc == NULL) { + printk(KERN_INFO "/proc/net/hostap/%s creation failed\n", + local->ddev->name); + return; + } + +#ifndef PRISM2_NO_PROCFS_DEBUG + proc_create_data("debug", 0, local->proc, + &prism2_debug_proc_fops, local); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + proc_create_data("stats", 0, local->proc, + &prism2_stats_proc_fops, local); + proc_create_data("wds", 0, local->proc, + &prism2_wds_proc_fops, local); + proc_create_data("pda", 0, local->proc, + &prism2_pda_proc_fops, local); + proc_create_data("aux_dump", 0, local->proc, + local->func->read_aux_fops ?: &prism2_aux_dump_proc_fops, + local); + proc_create_data("bss_list", 0, local->proc, + &prism2_bss_list_proc_fops, local); + proc_create_data("crypt", 0, local->proc, + &prism2_crypt_proc_fops, local); +#ifdef PRISM2_IO_DEBUG + proc_create_data("io_debug", 0, local->proc, + &prism2_io_debug_proc_fops, local); +#endif /* PRISM2_IO_DEBUG */ +#ifndef PRISM2_NO_STATION_MODES + proc_create_data("scan_results", 0, local->proc, + &prism2_scan_results_proc_fops, local); +#endif /* PRISM2_NO_STATION_MODES */ +} + + +void hostap_remove_proc(local_info_t *local) +{ + proc_remove(local->proc); +} + + +EXPORT_SYMBOL(hostap_init_proc); +EXPORT_SYMBOL(hostap_remove_proc); diff --git a/drivers/net/wireless/intersil/hostap/hostap_wlan.h b/drivers/net/wireless/intersil/hostap/hostap_wlan.h new file mode 100644 index 000000000..ca25283e1 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_wlan.h @@ -0,0 +1,1047 @@ +#ifndef HOSTAP_WLAN_H +#define HOSTAP_WLAN_H + +#include <linux/interrupt.h> +#include <linux/wireless.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/mutex.h> +#include <net/iw_handler.h> +#include <net/ieee80211_radiotap.h> +#include <net/lib80211.h> + +#include "hostap_config.h" +#include "hostap_common.h" + +#define MAX_PARM_DEVICES 8 +#define PARM_MIN_MAX "1-" __MODULE_STRING(MAX_PARM_DEVICES) +#define DEF_INTS -1, -1, -1, -1, -1, -1, -1 +#define GET_INT_PARM(var,idx) var[var[idx] < 0 ? 0 : idx] + + +/* Specific skb->protocol value that indicates that the packet already contains + * txdesc header. + * FIX: This might need own value that would be allocated especially for Prism2 + * txdesc; ETH_P_CONTROL is commented as "Card specific control frames". + * However, these skb's should have only minimal path in the kernel side since + * prism2_send_mgmt() sends these with dev_queue_xmit() to prism2_tx(). */ +#define ETH_P_HOSTAP ETH_P_CONTROL + +/* ARPHRD_IEEE80211_PRISM uses a bloated version of Prism2 RX frame header + * (from linux-wlan-ng) */ +struct linux_wlan_ng_val { + u32 did; + u16 status, len; + u32 data; +} __packed; + +struct linux_wlan_ng_prism_hdr { + u32 msgcode, msglen; + char devname[16]; + struct linux_wlan_ng_val hosttime, mactime, channel, rssi, sq, signal, + noise, rate, istx, frmlen; +} __packed; + +struct linux_wlan_ng_cap_hdr { + __be32 version; + __be32 length; + __be64 mactime; + __be64 hosttime; + __be32 phytype; + __be32 channel; + __be32 datarate; + __be32 antenna; + __be32 priority; + __be32 ssi_type; + __be32 ssi_signal; + __be32 ssi_noise; + __be32 preamble; + __be32 encoding; +} __packed; + +struct hostap_radiotap_rx { + struct ieee80211_radiotap_header hdr; + __le64 tsft; + u8 rate; + u8 padding; + __le16 chan_freq; + __le16 chan_flags; + s8 dbm_antsignal; + s8 dbm_antnoise; +} __packed; + +#define LWNG_CAP_DID_BASE (4 | (1 << 6)) /* section 4, group 1 */ +#define LWNG_CAPHDR_VERSION 0x80211001 + +struct hfa384x_rx_frame { + /* HFA384X RX frame descriptor */ + __le16 status; /* HFA384X_RX_STATUS_ flags */ + __le32 time; /* timestamp, 1 microsecond resolution */ + u8 silence; /* 27 .. 154; seems to be 0 */ + u8 signal; /* 27 .. 154 */ + u8 rate; /* 10, 20, 55, or 110 */ + u8 rxflow; + __le32 reserved; + + /* 802.11 */ + __le16 frame_control; + __le16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + __le16 seq_ctrl; + u8 addr4[ETH_ALEN]; + __le16 data_len; + + /* 802.3 */ + u8 dst_addr[ETH_ALEN]; + u8 src_addr[ETH_ALEN]; + __be16 len; + + /* followed by frame data; max 2304 bytes */ +} __packed; + + +struct hfa384x_tx_frame { + /* HFA384X TX frame descriptor */ + __le16 status; /* HFA384X_TX_STATUS_ flags */ + __le16 reserved1; + __le16 reserved2; + __le32 sw_support; + u8 retry_count; /* not yet implemented */ + u8 tx_rate; /* Host AP only; 0 = firmware, or 10, 20, 55, 110 */ + __le16 tx_control; /* HFA384X_TX_CTRL_ flags */ + + /* 802.11 */ + __le16 frame_control; /* parts not used */ + __le16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; /* filled by firmware */ + u8 addr3[ETH_ALEN]; + __le16 seq_ctrl; /* filled by firmware */ + u8 addr4[ETH_ALEN]; + __le16 data_len; + + /* 802.3 */ + u8 dst_addr[ETH_ALEN]; + u8 src_addr[ETH_ALEN]; + __be16 len; + + /* followed by frame data; max 2304 bytes */ +} __packed; + + +struct hfa384x_rid_hdr +{ + __le16 len; + __le16 rid; +} __packed; + + +/* Macro for converting signal levels (range 27 .. 154) to wireless ext + * dBm value with some accuracy */ +#define HFA384X_LEVEL_TO_dBm(v) 0x100 + (v) * 100 / 255 - 100 + +#define HFA384X_LEVEL_TO_dBm_sign(v) (v) * 100 / 255 - 100 + +struct hfa384x_scan_request { + __le16 channel_list; + __le16 txrate; /* HFA384X_RATES_* */ +} __packed; + +struct hfa384x_hostscan_request { + __le16 channel_list; + __le16 txrate; + __le16 target_ssid_len; + u8 target_ssid[32]; +} __packed; + +struct hfa384x_join_request { + u8 bssid[ETH_ALEN]; + __le16 channel; +} __packed; + +struct hfa384x_info_frame { + __le16 len; + __le16 type; +} __packed; + +struct hfa384x_comm_tallies { + __le16 tx_unicast_frames; + __le16 tx_multicast_frames; + __le16 tx_fragments; + __le16 tx_unicast_octets; + __le16 tx_multicast_octets; + __le16 tx_deferred_transmissions; + __le16 tx_single_retry_frames; + __le16 tx_multiple_retry_frames; + __le16 tx_retry_limit_exceeded; + __le16 tx_discards; + __le16 rx_unicast_frames; + __le16 rx_multicast_frames; + __le16 rx_fragments; + __le16 rx_unicast_octets; + __le16 rx_multicast_octets; + __le16 rx_fcs_errors; + __le16 rx_discards_no_buffer; + __le16 tx_discards_wrong_sa; + __le16 rx_discards_wep_undecryptable; + __le16 rx_message_in_msg_fragments; + __le16 rx_message_in_bad_msg_fragments; +} __packed; + +struct hfa384x_comm_tallies32 { + __le32 tx_unicast_frames; + __le32 tx_multicast_frames; + __le32 tx_fragments; + __le32 tx_unicast_octets; + __le32 tx_multicast_octets; + __le32 tx_deferred_transmissions; + __le32 tx_single_retry_frames; + __le32 tx_multiple_retry_frames; + __le32 tx_retry_limit_exceeded; + __le32 tx_discards; + __le32 rx_unicast_frames; + __le32 rx_multicast_frames; + __le32 rx_fragments; + __le32 rx_unicast_octets; + __le32 rx_multicast_octets; + __le32 rx_fcs_errors; + __le32 rx_discards_no_buffer; + __le32 tx_discards_wrong_sa; + __le32 rx_discards_wep_undecryptable; + __le32 rx_message_in_msg_fragments; + __le32 rx_message_in_bad_msg_fragments; +} __packed; + +struct hfa384x_scan_result_hdr { + __le16 reserved; + __le16 scan_reason; +#define HFA384X_SCAN_IN_PROGRESS 0 /* no results available yet */ +#define HFA384X_SCAN_HOST_INITIATED 1 +#define HFA384X_SCAN_FIRMWARE_INITIATED 2 +#define HFA384X_SCAN_INQUIRY_FROM_HOST 3 +} __packed; + +#define HFA384X_SCAN_MAX_RESULTS 32 + +struct hfa384x_scan_result { + __le16 chid; + __le16 anl; + __le16 sl; + u8 bssid[ETH_ALEN]; + __le16 beacon_interval; + __le16 capability; + __le16 ssid_len; + u8 ssid[32]; + u8 sup_rates[10]; + __le16 rate; +} __packed; + +struct hfa384x_hostscan_result { + __le16 chid; + __le16 anl; + __le16 sl; + u8 bssid[ETH_ALEN]; + __le16 beacon_interval; + __le16 capability; + __le16 ssid_len; + u8 ssid[32]; + u8 sup_rates[10]; + __le16 rate; + __le16 atim; +} __packed; + +struct comm_tallies_sums { + unsigned int tx_unicast_frames; + unsigned int tx_multicast_frames; + unsigned int tx_fragments; + unsigned int tx_unicast_octets; + unsigned int tx_multicast_octets; + unsigned int tx_deferred_transmissions; + unsigned int tx_single_retry_frames; + unsigned int tx_multiple_retry_frames; + unsigned int tx_retry_limit_exceeded; + unsigned int tx_discards; + unsigned int rx_unicast_frames; + unsigned int rx_multicast_frames; + unsigned int rx_fragments; + unsigned int rx_unicast_octets; + unsigned int rx_multicast_octets; + unsigned int rx_fcs_errors; + unsigned int rx_discards_no_buffer; + unsigned int tx_discards_wrong_sa; + unsigned int rx_discards_wep_undecryptable; + unsigned int rx_message_in_msg_fragments; + unsigned int rx_message_in_bad_msg_fragments; +}; + + +struct hfa384x_regs { + u16 cmd; + u16 evstat; + u16 offset0; + u16 offset1; + u16 swsupport0; +}; + + +#if defined(PRISM2_PCCARD) || defined(PRISM2_PLX) +/* I/O ports for HFA384X Controller access */ +#define HFA384X_CMD_OFF 0x00 +#define HFA384X_PARAM0_OFF 0x02 +#define HFA384X_PARAM1_OFF 0x04 +#define HFA384X_PARAM2_OFF 0x06 +#define HFA384X_STATUS_OFF 0x08 +#define HFA384X_RESP0_OFF 0x0A +#define HFA384X_RESP1_OFF 0x0C +#define HFA384X_RESP2_OFF 0x0E +#define HFA384X_INFOFID_OFF 0x10 +#define HFA384X_CONTROL_OFF 0x14 +#define HFA384X_SELECT0_OFF 0x18 +#define HFA384X_SELECT1_OFF 0x1A +#define HFA384X_OFFSET0_OFF 0x1C +#define HFA384X_OFFSET1_OFF 0x1E +#define HFA384X_RXFID_OFF 0x20 +#define HFA384X_ALLOCFID_OFF 0x22 +#define HFA384X_TXCOMPLFID_OFF 0x24 +#define HFA384X_SWSUPPORT0_OFF 0x28 +#define HFA384X_SWSUPPORT1_OFF 0x2A +#define HFA384X_SWSUPPORT2_OFF 0x2C +#define HFA384X_EVSTAT_OFF 0x30 +#define HFA384X_INTEN_OFF 0x32 +#define HFA384X_EVACK_OFF 0x34 +#define HFA384X_DATA0_OFF 0x36 +#define HFA384X_DATA1_OFF 0x38 +#define HFA384X_AUXPAGE_OFF 0x3A +#define HFA384X_AUXOFFSET_OFF 0x3C +#define HFA384X_AUXDATA_OFF 0x3E +#endif /* PRISM2_PCCARD || PRISM2_PLX */ + +#ifdef PRISM2_PCI +/* Memory addresses for ISL3874 controller access */ +#define HFA384X_CMD_OFF 0x00 +#define HFA384X_PARAM0_OFF 0x04 +#define HFA384X_PARAM1_OFF 0x08 +#define HFA384X_PARAM2_OFF 0x0C +#define HFA384X_STATUS_OFF 0x10 +#define HFA384X_RESP0_OFF 0x14 +#define HFA384X_RESP1_OFF 0x18 +#define HFA384X_RESP2_OFF 0x1C +#define HFA384X_INFOFID_OFF 0x20 +#define HFA384X_CONTROL_OFF 0x28 +#define HFA384X_SELECT0_OFF 0x30 +#define HFA384X_SELECT1_OFF 0x34 +#define HFA384X_OFFSET0_OFF 0x38 +#define HFA384X_OFFSET1_OFF 0x3C +#define HFA384X_RXFID_OFF 0x40 +#define HFA384X_ALLOCFID_OFF 0x44 +#define HFA384X_TXCOMPLFID_OFF 0x48 +#define HFA384X_PCICOR_OFF 0x4C +#define HFA384X_SWSUPPORT0_OFF 0x50 +#define HFA384X_SWSUPPORT1_OFF 0x54 +#define HFA384X_SWSUPPORT2_OFF 0x58 +#define HFA384X_PCIHCR_OFF 0x5C +#define HFA384X_EVSTAT_OFF 0x60 +#define HFA384X_INTEN_OFF 0x64 +#define HFA384X_EVACK_OFF 0x68 +#define HFA384X_DATA0_OFF 0x6C +#define HFA384X_DATA1_OFF 0x70 +#define HFA384X_AUXPAGE_OFF 0x74 +#define HFA384X_AUXOFFSET_OFF 0x78 +#define HFA384X_AUXDATA_OFF 0x7C +#define HFA384X_PCI_M0_ADDRH_OFF 0x80 +#define HFA384X_PCI_M0_ADDRL_OFF 0x84 +#define HFA384X_PCI_M0_LEN_OFF 0x88 +#define HFA384X_PCI_M0_CTL_OFF 0x8C +#define HFA384X_PCI_STATUS_OFF 0x98 +#define HFA384X_PCI_M1_ADDRH_OFF 0xA0 +#define HFA384X_PCI_M1_ADDRL_OFF 0xA4 +#define HFA384X_PCI_M1_LEN_OFF 0xA8 +#define HFA384X_PCI_M1_CTL_OFF 0xAC + +/* PCI bus master control bits (these are undocumented; based on guessing and + * experimenting..) */ +#define HFA384X_PCI_CTL_FROM_BAP (BIT(5) | BIT(1) | BIT(0)) +#define HFA384X_PCI_CTL_TO_BAP (BIT(5) | BIT(0)) + +#endif /* PRISM2_PCI */ + + +/* Command codes for CMD reg. */ +#define HFA384X_CMDCODE_INIT 0x00 +#define HFA384X_CMDCODE_ENABLE 0x01 +#define HFA384X_CMDCODE_DISABLE 0x02 +#define HFA384X_CMDCODE_ALLOC 0x0A +#define HFA384X_CMDCODE_TRANSMIT 0x0B +#define HFA384X_CMDCODE_INQUIRE 0x11 +#define HFA384X_CMDCODE_ACCESS 0x21 +#define HFA384X_CMDCODE_ACCESS_WRITE (0x21 | BIT(8)) +#define HFA384X_CMDCODE_DOWNLOAD 0x22 +#define HFA384X_CMDCODE_READMIF 0x30 +#define HFA384X_CMDCODE_WRITEMIF 0x31 +#define HFA384X_CMDCODE_TEST 0x38 + +#define HFA384X_CMDCODE_MASK 0x3F + +/* Test mode operations */ +#define HFA384X_TEST_CHANGE_CHANNEL 0x08 +#define HFA384X_TEST_MONITOR 0x0B +#define HFA384X_TEST_STOP 0x0F +#define HFA384X_TEST_CFG_BITS 0x15 +#define HFA384X_TEST_CFG_BIT_ALC BIT(3) + +#define HFA384X_CMD_BUSY BIT(15) + +#define HFA384X_CMD_TX_RECLAIM BIT(8) + +#define HFA384X_OFFSET_ERR BIT(14) +#define HFA384X_OFFSET_BUSY BIT(15) + + +/* ProgMode for download command */ +#define HFA384X_PROGMODE_DISABLE 0 +#define HFA384X_PROGMODE_ENABLE_VOLATILE 1 +#define HFA384X_PROGMODE_ENABLE_NON_VOLATILE 2 +#define HFA384X_PROGMODE_PROGRAM_NON_VOLATILE 3 + +#define HFA384X_AUX_MAGIC0 0xfe01 +#define HFA384X_AUX_MAGIC1 0xdc23 +#define HFA384X_AUX_MAGIC2 0xba45 + +#define HFA384X_AUX_PORT_DISABLED 0 +#define HFA384X_AUX_PORT_DISABLE BIT(14) +#define HFA384X_AUX_PORT_ENABLE BIT(15) +#define HFA384X_AUX_PORT_ENABLED (BIT(14) | BIT(15)) +#define HFA384X_AUX_PORT_MASK (BIT(14) | BIT(15)) + +#define PRISM2_PDA_SIZE 1024 + + +/* Events; EvStat, Interrupt mask (IntEn), and acknowledge bits (EvAck) */ +#define HFA384X_EV_TICK BIT(15) +#define HFA384X_EV_WTERR BIT(14) +#define HFA384X_EV_INFDROP BIT(13) +#ifdef PRISM2_PCI +#define HFA384X_EV_PCI_M1 BIT(9) +#define HFA384X_EV_PCI_M0 BIT(8) +#endif /* PRISM2_PCI */ +#define HFA384X_EV_INFO BIT(7) +#define HFA384X_EV_DTIM BIT(5) +#define HFA384X_EV_CMD BIT(4) +#define HFA384X_EV_ALLOC BIT(3) +#define HFA384X_EV_TXEXC BIT(2) +#define HFA384X_EV_TX BIT(1) +#define HFA384X_EV_RX BIT(0) + + +/* HFA384X Information frames */ +#define HFA384X_INFO_HANDOVERADDR 0xF000 /* AP f/w ? */ +#define HFA384X_INFO_HANDOVERDEAUTHADDR 0xF001 /* AP f/w 1.3.7 */ +#define HFA384X_INFO_COMMTALLIES 0xF100 +#define HFA384X_INFO_SCANRESULTS 0xF101 +#define HFA384X_INFO_CHANNELINFORESULTS 0xF102 /* AP f/w only */ +#define HFA384X_INFO_HOSTSCANRESULTS 0xF103 +#define HFA384X_INFO_LINKSTATUS 0xF200 +#define HFA384X_INFO_ASSOCSTATUS 0xF201 /* ? */ +#define HFA384X_INFO_AUTHREQ 0xF202 /* ? */ +#define HFA384X_INFO_PSUSERCNT 0xF203 /* ? */ +#define HFA384X_INFO_KEYIDCHANGED 0xF204 /* ? */ + +enum { HFA384X_LINKSTATUS_CONNECTED = 1, + HFA384X_LINKSTATUS_DISCONNECTED = 2, + HFA384X_LINKSTATUS_AP_CHANGE = 3, + HFA384X_LINKSTATUS_AP_OUT_OF_RANGE = 4, + HFA384X_LINKSTATUS_AP_IN_RANGE = 5, + HFA384X_LINKSTATUS_ASSOC_FAILED = 6 }; + +enum { HFA384X_PORTTYPE_BSS = 1, HFA384X_PORTTYPE_WDS = 2, + HFA384X_PORTTYPE_PSEUDO_IBSS = 3, HFA384X_PORTTYPE_IBSS = 0, + HFA384X_PORTTYPE_HOSTAP = 6 }; + +#define HFA384X_RATES_1MBPS BIT(0) +#define HFA384X_RATES_2MBPS BIT(1) +#define HFA384X_RATES_5MBPS BIT(2) +#define HFA384X_RATES_11MBPS BIT(3) + +#define HFA384X_ROAMING_FIRMWARE 1 +#define HFA384X_ROAMING_HOST 2 +#define HFA384X_ROAMING_DISABLED 3 + +#define HFA384X_WEPFLAGS_PRIVACYINVOKED BIT(0) +#define HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED BIT(1) +#define HFA384X_WEPFLAGS_HOSTENCRYPT BIT(4) +#define HFA384X_WEPFLAGS_HOSTDECRYPT BIT(7) + +#define HFA384X_RX_STATUS_MSGTYPE (BIT(15) | BIT(14) | BIT(13)) +#define HFA384X_RX_STATUS_PCF BIT(12) +#define HFA384X_RX_STATUS_MACPORT (BIT(10) | BIT(9) | BIT(8)) +#define HFA384X_RX_STATUS_UNDECR BIT(1) +#define HFA384X_RX_STATUS_FCSERR BIT(0) + +#define HFA384X_RX_STATUS_GET_MSGTYPE(s) \ +(((s) & HFA384X_RX_STATUS_MSGTYPE) >> 13) +#define HFA384X_RX_STATUS_GET_MACPORT(s) \ +(((s) & HFA384X_RX_STATUS_MACPORT) >> 8) + +enum { HFA384X_RX_MSGTYPE_NORMAL = 0, HFA384X_RX_MSGTYPE_RFC1042 = 1, + HFA384X_RX_MSGTYPE_BRIDGETUNNEL = 2, HFA384X_RX_MSGTYPE_MGMT = 4 }; + + +#define HFA384X_TX_CTRL_ALT_RTRY BIT(5) +#define HFA384X_TX_CTRL_802_11 BIT(3) +#define HFA384X_TX_CTRL_802_3 0 +#define HFA384X_TX_CTRL_TX_EX BIT(2) +#define HFA384X_TX_CTRL_TX_OK BIT(1) + +#define HFA384X_TX_STATUS_RETRYERR BIT(0) +#define HFA384X_TX_STATUS_AGEDERR BIT(1) +#define HFA384X_TX_STATUS_DISCON BIT(2) +#define HFA384X_TX_STATUS_FORMERR BIT(3) + +/* HFA3861/3863 (BBP) Control Registers */ +#define HFA386X_CR_TX_CONFIGURE 0x12 /* CR9 */ +#define HFA386X_CR_RX_CONFIGURE 0x14 /* CR10 */ +#define HFA386X_CR_A_D_TEST_MODES2 0x1A /* CR13 */ +#define HFA386X_CR_MANUAL_TX_POWER 0x3E /* CR31 */ +#define HFA386X_CR_MEASURED_TX_POWER 0x74 /* CR58 */ + + +#ifdef __KERNEL__ + +#define PRISM2_TXFID_COUNT 8 +#define PRISM2_DATA_MAXLEN 2304 +#define PRISM2_TXFID_LEN (PRISM2_DATA_MAXLEN + sizeof(struct hfa384x_tx_frame)) +#define PRISM2_TXFID_EMPTY 0xffff +#define PRISM2_TXFID_RESERVED 0xfffe +#define PRISM2_DUMMY_FID 0xffff +#define MAX_SSID_LEN 32 +#define MAX_NAME_LEN 32 /* this is assumed to be equal to MAX_SSID_LEN */ + +#define PRISM2_DUMP_RX_HDR BIT(0) +#define PRISM2_DUMP_TX_HDR BIT(1) +#define PRISM2_DUMP_TXEXC_HDR BIT(2) + +struct hostap_tx_callback_info { + u16 idx; + void (*func)(struct sk_buff *, int ok, void *); + void *data; + struct hostap_tx_callback_info *next; +}; + + +/* IEEE 802.11 requires that STA supports concurrent reception of at least + * three fragmented frames. This define can be increased to support more + * concurrent frames, but it should be noted that each entry can consume about + * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ +#define PRISM2_FRAG_CACHE_LEN 4 + +struct prism2_frag_entry { + unsigned long first_frag_time; + unsigned int seq; + unsigned int last_frag; + struct sk_buff *skb; + u8 src_addr[ETH_ALEN]; + u8 dst_addr[ETH_ALEN]; +}; + + +struct hostap_cmd_queue { + struct list_head list; + wait_queue_head_t compl; + volatile enum { CMD_SLEEP, CMD_CALLBACK, CMD_COMPLETED } type; + void (*callback)(struct net_device *dev, long context, u16 resp0, + u16 res); + long context; + u16 cmd, param0, param1; + u16 resp0, res; + volatile int issued, issuing; + + atomic_t usecnt; + int del_req; +}; + +/* options for hw_shutdown */ +#define HOSTAP_HW_NO_DISABLE BIT(0) +#define HOSTAP_HW_ENABLE_CMDCOMPL BIT(1) + +typedef struct local_info local_info_t; + +struct prism2_helper_functions { + /* these functions are defined in hardware model specific files + * (hostap_{cs,plx,pci}.c */ + int (*card_present)(local_info_t *local); + void (*cor_sreset)(local_info_t *local); + void (*genesis_reset)(local_info_t *local, int hcr); + + /* the following functions are from hostap_hw.c, but they may have some + * hardware model specific code */ + + /* FIX: low-level commands like cmd might disappear at some point to + * make it easier to change them if needed (e.g., cmd would be replaced + * with write_mif/read_mif/testcmd/inquire); at least get_rid and + * set_rid might move to hostap_{cs,plx,pci}.c */ + int (*cmd)(struct net_device *dev, u16 cmd, u16 param0, u16 *param1, + u16 *resp0); + void (*read_regs)(struct net_device *dev, struct hfa384x_regs *regs); + int (*get_rid)(struct net_device *dev, u16 rid, void *buf, int len, + int exact_len); + int (*set_rid)(struct net_device *dev, u16 rid, void *buf, int len); + int (*hw_enable)(struct net_device *dev, int initial); + int (*hw_config)(struct net_device *dev, int initial); + void (*hw_reset)(struct net_device *dev); + void (*hw_shutdown)(struct net_device *dev, int no_disable); + int (*reset_port)(struct net_device *dev); + void (*schedule_reset)(local_info_t *local); + int (*download)(local_info_t *local, + struct prism2_download_param *param); + int (*tx)(struct sk_buff *skb, struct net_device *dev); + int (*set_tim)(struct net_device *dev, int aid, int set); + const struct file_operations *read_aux_fops; + + int need_tx_headroom; /* number of bytes of headroom needed before + * IEEE 802.11 header */ + enum { HOSTAP_HW_PCCARD, HOSTAP_HW_PLX, HOSTAP_HW_PCI } hw_type; +}; + + +struct prism2_download_data { + u32 dl_cmd; + u32 start_addr; + u32 num_areas; + struct prism2_download_data_area { + u32 addr; /* wlan card address */ + u32 len; + u8 *data; /* allocated data */ + } data[0]; +}; + + +#define HOSTAP_MAX_BSS_COUNT 64 +#define MAX_WPA_IE_LEN 64 + +struct hostap_bss_info { + struct list_head list; + unsigned long last_update; + unsigned int count; + u8 bssid[ETH_ALEN]; + u16 capab_info; + u8 ssid[32]; + size_t ssid_len; + u8 wpa_ie[MAX_WPA_IE_LEN]; + size_t wpa_ie_len; + u8 rsn_ie[MAX_WPA_IE_LEN]; + size_t rsn_ie_len; + int chan; + int included; +}; + + +/* Per radio private Host AP data - shared by all net devices interfaces used + * by each radio (wlan#, wlan#ap, wlan#sta, WDS). + * ((struct hostap_interface *) netdev_priv(dev))->local points to this + * structure. */ +struct local_info { + struct module *hw_module; + int card_idx; + int dev_enabled; + int master_dev_auto_open; /* was master device opened automatically */ + int num_dev_open; /* number of open devices */ + struct net_device *dev; /* master radio device */ + struct net_device *ddev; /* main data device */ + struct list_head hostap_interfaces; /* Host AP interface list (contains + * struct hostap_interface entries) + */ + rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock + * when removing entries from the list. + * TX and RX paths can use read lock. */ + spinlock_t cmdlock, baplock, lock, irq_init_lock; + struct mutex rid_bap_mtx; + u16 infofid; /* MAC buffer id for info frame */ + /* txfid, intransmitfid, next_txtid, and next_alloc are protected by + * txfidlock */ + spinlock_t txfidlock; + int txfid_len; /* length of allocated TX buffers */ + u16 txfid[PRISM2_TXFID_COUNT]; /* buffer IDs for TX frames */ + /* buffer IDs for intransmit frames or PRISM2_TXFID_EMPTY if + * corresponding txfid is free for next TX frame */ + u16 intransmitfid[PRISM2_TXFID_COUNT]; + int next_txfid; /* index to the next txfid to be checked for + * availability */ + int next_alloc; /* index to the next intransmitfid to be checked for + * allocation events */ + + /* bitfield for atomic bitops */ +#define HOSTAP_BITS_TRANSMIT 0 +#define HOSTAP_BITS_BAP_TASKLET 1 +#define HOSTAP_BITS_BAP_TASKLET2 2 + unsigned long bits; + + struct ap_data *ap; + + char essid[MAX_SSID_LEN + 1]; + char name[MAX_NAME_LEN + 1]; + int name_set; + u16 channel_mask; /* mask of allowed channels */ + u16 scan_channel_mask; /* mask of channels to be scanned */ + struct comm_tallies_sums comm_tallies; + struct proc_dir_entry *proc; + int iw_mode; /* operating mode (IW_MODE_*) */ + int pseudo_adhoc; /* 0: IW_MODE_ADHOC is real 802.11 compliant IBSS + * 1: IW_MODE_ADHOC is "pseudo IBSS" */ + char bssid[ETH_ALEN]; + int channel; + int beacon_int; + int dtim_period; + int mtu; + int frame_dump; /* dump RX/TX frame headers, PRISM2_DUMP_ flags */ + int fw_tx_rate_control; + u16 tx_rate_control; + u16 basic_rates; + int hw_resetting; + int hw_ready; + int hw_reset_tries; /* how many times reset has been tried */ + int hw_downloading; + int shutdown; + int pri_only; + int no_pri; /* no PRI f/w present */ + int sram_type; /* 8 = x8 SRAM, 16 = x16 SRAM, -1 = unknown */ + + enum { + PRISM2_TXPOWER_AUTO = 0, PRISM2_TXPOWER_OFF, + PRISM2_TXPOWER_FIXED, PRISM2_TXPOWER_UNKNOWN + } txpower_type; + int txpower; /* if txpower_type == PRISM2_TXPOWER_FIXED */ + + /* command queue for hfa384x_cmd(); protected with cmdlock */ + struct list_head cmd_queue; + /* max_len for cmd_queue; in addition, cmd_callback can use two + * additional entries to prevent sleeping commands from stopping + * transmits */ +#define HOSTAP_CMD_QUEUE_MAX_LEN 16 + int cmd_queue_len; /* number of entries in cmd_queue */ + + /* if card timeout is detected in interrupt context, reset_queue is + * used to schedule card reseting to be done in user context */ + struct work_struct reset_queue; + + /* For scheduling a change of the promiscuous mode RID */ + int is_promisc; + struct work_struct set_multicast_list_queue; + + struct work_struct set_tim_queue; + struct list_head set_tim_list; + spinlock_t set_tim_lock; + + int wds_max_connections; + int wds_connections; +#define HOSTAP_WDS_BROADCAST_RA BIT(0) +#define HOSTAP_WDS_AP_CLIENT BIT(1) +#define HOSTAP_WDS_STANDARD_FRAME BIT(2) + u32 wds_type; + u16 tx_control; /* flags to be used in TX description */ + int manual_retry_count; /* -1 = use f/w default; otherwise retry count + * to be used with all frames */ + + struct iw_statistics wstats; + unsigned long scan_timestamp; /* Time started to scan */ + enum { + PRISM2_MONITOR_80211 = 0, PRISM2_MONITOR_PRISM = 1, + PRISM2_MONITOR_CAPHDR = 2, PRISM2_MONITOR_RADIOTAP = 3 + } monitor_type; + int monitor_allow_fcserr; + + int hostapd; /* whether user space daemon, hostapd, is used for AP + * management */ + int hostapd_sta; /* whether hostapd is used with an extra STA interface + */ + struct net_device *apdev; + struct net_device_stats apdevstats; + + char assoc_ap_addr[ETH_ALEN]; + struct net_device *stadev; + struct net_device_stats stadevstats; + +#define WEP_KEYS 4 +#define WEP_KEY_LEN 13 + struct lib80211_crypt_info crypt_info; + + int open_wep; /* allow unencrypted frames */ + int host_encrypt; + int host_decrypt; + int privacy_invoked; /* force privacy invoked flag even if no keys are + * configured */ + int fw_encrypt_ok; /* whether firmware-based WEP encrypt is working + * in Host AP mode (STA f/w 1.4.9 or newer) */ + int bcrx_sta_key; /* use individual keys to override default keys even + * with RX of broad/multicast frames */ + + struct prism2_frag_entry frag_cache[PRISM2_FRAG_CACHE_LEN]; + unsigned int frag_next_idx; + + int ieee_802_1x; /* is IEEE 802.1X used */ + + int antsel_tx, antsel_rx; + int rts_threshold; /* dot11RTSThreshold */ + int fragm_threshold; /* dot11FragmentationThreshold */ + int auth_algs; /* PRISM2_AUTH_ flags */ + + int enh_sec; /* cnfEnhSecurity options (broadcast SSID hide/ignore) */ + int tallies32; /* 32-bit tallies in use */ + + struct prism2_helper_functions *func; + + u8 *pda; + int fw_ap; +#define PRISM2_FW_VER(major, minor, variant) \ +(((major) << 16) | ((minor) << 8) | variant) + u32 sta_fw_ver; + + /* Tasklets for handling hardware IRQ related operations outside hw IRQ + * handler */ + struct tasklet_struct bap_tasklet; + + struct tasklet_struct info_tasklet; + struct sk_buff_head info_list; /* info frames as skb's for + * info_tasklet */ + + struct hostap_tx_callback_info *tx_callback; /* registered TX callbacks + */ + + struct tasklet_struct rx_tasklet; + struct sk_buff_head rx_list; + + struct tasklet_struct sta_tx_exc_tasklet; + struct sk_buff_head sta_tx_exc_list; + + int host_roaming; + unsigned long last_join_time; /* time of last JoinRequest */ + struct hfa384x_hostscan_result *last_scan_results; + int last_scan_results_count; + enum { PRISM2_SCAN, PRISM2_HOSTSCAN } last_scan_type; + struct work_struct info_queue; + unsigned long pending_info; /* bit field of pending info_queue items */ +#define PRISM2_INFO_PENDING_LINKSTATUS 0 +#define PRISM2_INFO_PENDING_SCANRESULTS 1 + int prev_link_status; /* previous received LinkStatus info */ + int prev_linkstatus_connected; + u8 preferred_ap[ETH_ALEN]; /* use this AP if possible */ + +#ifdef PRISM2_CALLBACK + void *callback_data; /* Can be used in callbacks; e.g., allocate + * on enable event and free on disable event. + * Host AP driver code does not touch this. */ +#endif /* PRISM2_CALLBACK */ + + wait_queue_head_t hostscan_wq; + + /* Passive scan in Host AP mode */ + struct timer_list passive_scan_timer; + int passive_scan_interval; /* in seconds, 0 = disabled */ + int passive_scan_channel; + enum { PASSIVE_SCAN_WAIT, PASSIVE_SCAN_LISTEN } passive_scan_state; + + struct timer_list tick_timer; + unsigned long last_tick_timer; + unsigned int sw_tick_stuck; + + /* commsQuality / dBmCommsQuality data from periodic polling; only + * valid for Managed and Ad-hoc modes */ + unsigned long last_comms_qual_update; + int comms_qual; /* in some odd unit.. */ + int avg_signal; /* in dB (note: negative) */ + int avg_noise; /* in dB (note: negative) */ + struct work_struct comms_qual_update; + + /* RSSI to dBm adjustment (for RX descriptor fields) */ + int rssi_to_dBm; /* subtract from RSSI to get approximate dBm value */ + + /* BSS list / protected by local->lock */ + struct list_head bss_list; + int num_bss_info; + int wpa; /* WPA support enabled */ + int tkip_countermeasures; + int drop_unencrypted; + /* Generic IEEE 802.11 info element to be added to + * ProbeResp/Beacon/(Re)AssocReq */ + u8 *generic_elem; + size_t generic_elem_len; + +#ifdef PRISM2_DOWNLOAD_SUPPORT + /* Persistent volatile download data */ + struct prism2_download_data *dl_pri; + struct prism2_download_data *dl_sec; +#endif /* PRISM2_DOWNLOAD_SUPPORT */ + +#ifdef PRISM2_IO_DEBUG +#define PRISM2_IO_DEBUG_SIZE 10000 + u32 io_debug[PRISM2_IO_DEBUG_SIZE]; + int io_debug_head; + int io_debug_enabled; +#endif /* PRISM2_IO_DEBUG */ + + /* Pointer to hardware model specific (cs,pci,plx) private data. */ + void *hw_priv; +}; + + +/* Per interface private Host AP data + * Allocated for each net device that Host AP uses (wlan#, wlan#ap, wlan#sta, + * WDS) and netdev_priv(dev) points to this structure. */ +struct hostap_interface { + struct list_head list; /* list entry in Host AP interface list */ + struct net_device *dev; /* pointer to this device */ + struct local_info *local; /* pointer to shared private data */ + struct net_device_stats stats; + struct iw_spy_data spy_data; /* iwspy support */ + struct iw_public_data wireless_data; + + enum { + HOSTAP_INTERFACE_MASTER, + HOSTAP_INTERFACE_MAIN, + HOSTAP_INTERFACE_AP, + HOSTAP_INTERFACE_STA, + HOSTAP_INTERFACE_WDS, + } type; + + union { + struct hostap_interface_wds { + u8 remote_addr[ETH_ALEN]; + } wds; + } u; +}; + + +#define HOSTAP_SKB_TX_DATA_MAGIC 0xf08a36a2 + +/* + * TX meta data - stored in skb->cb buffer, so this must not be increased over + * the 48-byte limit. + * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE + * TO SEE THE DAY. + */ +struct hostap_skb_tx_data { + unsigned int __padding_for_default_qdiscs; + u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */ + u8 rate; /* transmit rate */ +#define HOSTAP_TX_FLAGS_WDS BIT(0) +#define HOSTAP_TX_FLAGS_BUFFERED_FRAME BIT(1) +#define HOSTAP_TX_FLAGS_ADD_MOREDATA BIT(2) + u8 flags; /* HOSTAP_TX_FLAGS_* */ + u16 tx_cb_idx; + struct hostap_interface *iface; + unsigned long jiffies; /* queueing timestamp */ + unsigned short ethertype; +}; + + +#ifndef PRISM2_NO_DEBUG + +#define DEBUG_FID BIT(0) +#define DEBUG_PS BIT(1) +#define DEBUG_FLOW BIT(2) +#define DEBUG_AP BIT(3) +#define DEBUG_HW BIT(4) +#define DEBUG_EXTRA BIT(5) +#define DEBUG_EXTRA2 BIT(6) +#define DEBUG_PS2 BIT(7) +#define DEBUG_MASK (DEBUG_PS | DEBUG_AP | DEBUG_HW | DEBUG_EXTRA) +#define PDEBUG(n, args...) \ +do { if ((n) & DEBUG_MASK) printk(KERN_DEBUG args); } while (0) +#define PDEBUG2(n, args...) \ +do { if ((n) & DEBUG_MASK) printk(args); } while (0) + +#else /* PRISM2_NO_DEBUG */ + +#define PDEBUG(n, args...) +#define PDEBUG2(n, args...) + +#endif /* PRISM2_NO_DEBUG */ + +enum { BAP0 = 0, BAP1 = 1 }; + +#define PRISM2_IO_DEBUG_CMD_INB 0 +#define PRISM2_IO_DEBUG_CMD_INW 1 +#define PRISM2_IO_DEBUG_CMD_INSW 2 +#define PRISM2_IO_DEBUG_CMD_OUTB 3 +#define PRISM2_IO_DEBUG_CMD_OUTW 4 +#define PRISM2_IO_DEBUG_CMD_OUTSW 5 +#define PRISM2_IO_DEBUG_CMD_ERROR 6 +#define PRISM2_IO_DEBUG_CMD_INTERRUPT 7 + +#ifdef PRISM2_IO_DEBUG + +#define PRISM2_IO_DEBUG_ENTRY(cmd, reg, value) \ +(((cmd) << 24) | ((reg) << 16) | value) + +static inline void prism2_io_debug_add(struct net_device *dev, int cmd, + int reg, int value) +{ + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + + if (!local->io_debug_enabled) + return; + + local->io_debug[local->io_debug_head] = jiffies & 0xffffffff; + if (++local->io_debug_head >= PRISM2_IO_DEBUG_SIZE) + local->io_debug_head = 0; + local->io_debug[local->io_debug_head] = + PRISM2_IO_DEBUG_ENTRY(cmd, reg, value); + if (++local->io_debug_head >= PRISM2_IO_DEBUG_SIZE) + local->io_debug_head = 0; +} + + +static inline void prism2_io_debug_error(struct net_device *dev, int err) +{ + struct hostap_interface *iface = netdev_priv(dev); + local_info_t *local = iface->local; + unsigned long flags; + + if (!local->io_debug_enabled) + return; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_ERROR, 0, err); + if (local->io_debug_enabled == 1) { + local->io_debug_enabled = 0; + printk(KERN_DEBUG "%s: I/O debug stopped\n", dev->name); + } + spin_unlock_irqrestore(&local->lock, flags); +} + +#else /* PRISM2_IO_DEBUG */ + +static inline void prism2_io_debug_add(struct net_device *dev, int cmd, + int reg, int value) +{ +} + +static inline void prism2_io_debug_error(struct net_device *dev, int err) +{ +} + +#endif /* PRISM2_IO_DEBUG */ + + +#ifdef PRISM2_CALLBACK +enum { + /* Called when card is enabled */ + PRISM2_CALLBACK_ENABLE, + + /* Called when card is disabled */ + PRISM2_CALLBACK_DISABLE, + + /* Called when RX/TX starts/ends */ + PRISM2_CALLBACK_RX_START, PRISM2_CALLBACK_RX_END, + PRISM2_CALLBACK_TX_START, PRISM2_CALLBACK_TX_END +}; +void prism2_callback(local_info_t *local, int event); +#else /* PRISM2_CALLBACK */ +#define prism2_callback(d, e) do { } while (0) +#endif /* PRISM2_CALLBACK */ + +#endif /* __KERNEL__ */ + +#endif /* HOSTAP_WLAN_H */ diff --git a/drivers/net/wireless/intersil/orinoco/Kconfig b/drivers/net/wireless/intersil/orinoco/Kconfig new file mode 100644 index 000000000..f6fa3f4e2 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/Kconfig @@ -0,0 +1,142 @@ +config HERMES + tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" + depends on (PPC_PMAC || PCI || PCMCIA) + depends on CFG80211 + select CFG80211_WEXT_EXPORT + select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV + select FW_LOADER + select CRYPTO + select CRYPTO_MICHAEL_MIC + ---help--- + A driver for 802.11b wireless cards based on the "Hermes" or + Intersil HFA384x (Prism 2) MAC controller. This includes the vast + majority of the PCMCIA 802.11b cards (which are nearly all rebadges) + - except for the Cisco/Aironet cards. Cards supported include the + Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, + Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, + IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear + MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel + IPW2011, and Symbol Spectrum24 High Rate amongst others. + + This option includes the guts of the driver, but in order to + actually use a card you will also need to enable support for PCMCIA + Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. + + You will also very likely also need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works : + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> + +config HERMES_PRISM + bool "Support Prism 2/2.5 chipset" + depends on HERMES + ---help--- + + Say Y to enable support for Prism 2 and 2.5 chipsets. These + chipsets are better handled by the hostap driver. This driver + would not support WPA or firmware download for Prism chipset. + + If you are not sure, say N. + +config HERMES_CACHE_FW_ON_INIT + bool "Cache Hermes firmware on driver initialisation" + depends on HERMES + default y + ---help--- + Say Y to cache any firmware required by the Hermes drivers + on startup. The firmware will remain cached until the + driver is unloaded. The cache uses 64K of RAM. + + Otherwise load the firmware from userspace as required. In + this case the driver should be unloaded and restarted + whenever the firmware is changed. + + If you are not sure, say Y. + +config APPLE_AIRPORT + tristate "Apple Airport support (built-in)" + depends on PPC_PMAC && HERMES + help + Say Y here to support the Airport 802.11b wireless Ethernet hardware + built into the Macintosh iBook and other recent PowerPC-based + Macintosh machines. This is essentially a Lucent Orinoco card with + a non-standard interface. + + This driver does not support the Airport Extreme (802.11b/g). Use + the BCM43xx driver for Airport Extreme cards. + +config PLX_HERMES + tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in PLX9052 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. The Netgear + MA301 is such an adaptor. + +config TMD_HERMES + tristate "Hermes in TMD7160 based PCI adaptor support" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in TMD7160 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. + +config NORTEL_HERMES + tristate "Nortel emobility PCI adaptor support" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in Nortel emobility PCI adaptors. These + adaptors are not full PCMCIA controllers, but act as a more limited + PCI <-> PCMCIA bridge. + +config PCI_HERMES + tristate "Prism 2.5 PCI 802.11b adaptor support" + depends on PCI && HERMES && HERMES_PRISM + help + Enable support for PCI and mini-PCI 802.11b wireless NICs based on + the Prism 2.5 chipset. These are true PCI cards, not the 802.11b + PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also + common. Some of the built-in wireless adaptors in laptops are of + this variety. + +config PCMCIA_HERMES + tristate "Hermes PCMCIA card support" + depends on PCMCIA && HERMES && HAS_IOPORT_MAP + ---help--- + A driver for "Hermes" chipset based PCMCIA wireless adaptors, such + as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ + EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and + others). It should also be usable on various Prism II based cards + such as the Linksys, D-Link and Farallon Skyline. It should also + work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. + + You will very likely need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works: + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + +config PCMCIA_SPECTRUM + tristate "Symbol Spectrum24 Trilogy PCMCIA card support" + depends on PCMCIA && HERMES && HAS_IOPORT_MAP + ---help--- + + This is a driver for 802.11b cards using RAM-loadable Symbol + firmware, such as Symbol Wireless Networker LA4100, CompactFlash + cards by Socket Communications and Intel PRO/Wireless 2011B. + + This driver requires firmware download on startup. Utilities + for downloading Symbol firmware are available at + <http://sourceforge.net/projects/orinoco/> + +config ORINOCO_USB + tristate "Agere Orinoco USB support" + depends on USB && HERMES + select FW_LOADER + ---help--- + This driver is for USB versions of the Agere Orinoco card. diff --git a/drivers/net/wireless/intersil/orinoco/Makefile b/drivers/net/wireless/intersil/orinoco/Makefile new file mode 100644 index 000000000..bfdefb85a --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/Makefile @@ -0,0 +1,17 @@ +# +# Makefile for the orinoco wireless device drivers. +# +orinoco-objs := main.o fw.o hw.o mic.o scan.o wext.o hermes_dld.o hermes.o cfg.o + +obj-$(CONFIG_HERMES) += orinoco.o +obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o +obj-$(CONFIG_APPLE_AIRPORT) += airport.o +obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o +obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o +obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o +obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o +obj-$(CONFIG_PCMCIA_SPECTRUM) += spectrum_cs.o +obj-$(CONFIG_ORINOCO_USB) += orinoco_usb.o + +# Orinoco should be endian clean. +ccflags-y += -D__CHECK_ENDIAN__ diff --git a/drivers/net/wireless/intersil/orinoco/airport.c b/drivers/net/wireless/intersil/orinoco/airport.c new file mode 100644 index 000000000..77e6c5304 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/airport.c @@ -0,0 +1,267 @@ +/* airport.c + * + * A driver for "Hermes" chipset based Apple Airport wireless + * card. + * + * Copyright notice & release notes in file main.c + * + * Note specific to airport stub: + * + * 0.05 : first version of the new split driver + * 0.06 : fix possible hang on powerup, add sleep support + */ + +#define DRIVER_NAME "airport" +#define PFX DRIVER_NAME ": " + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <asm/pmac_feature.h> + +#include "orinoco.h" + +#define AIRPORT_IO_LEN (0x1000) /* one page */ + +struct airport { + struct macio_dev *mdev; + void __iomem *vaddr; + unsigned int irq; + int irq_requested; + int ndev_registered; +}; + +static int +airport_suspend(struct macio_dev *mdev, pm_message_t state) +{ + struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev); + struct net_device *dev = priv->ndev; + struct airport *card = priv->card; + unsigned long flags; + int err; + + printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name); + + err = orinoco_lock(priv, &flags); + if (err) { + printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n", + dev->name); + return 0; + } + + orinoco_down(priv); + orinoco_unlock(priv, &flags); + + disable_irq(card->irq); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 0); + + return 0; +} + +static int +airport_resume(struct macio_dev *mdev) +{ + struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev); + struct net_device *dev = priv->ndev; + struct airport *card = priv->card; + unsigned long flags; + int err; + + printk(KERN_DEBUG "%s: Airport waking up\n", dev->name); + + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 1); + msleep(200); + + enable_irq(card->irq); + + priv->hw.ops->lock_irqsave(&priv->lock, &flags); + err = orinoco_up(priv); + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); + + return err; +} + +static int +airport_detach(struct macio_dev *mdev) +{ + struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev); + struct airport *card = priv->card; + + if (card->ndev_registered) + orinoco_if_del(priv); + card->ndev_registered = 0; + + if (card->irq_requested) + free_irq(card->irq, priv); + card->irq_requested = 0; + + if (card->vaddr) + iounmap(card->vaddr); + card->vaddr = NULL; + + macio_release_resource(mdev, 0); + + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 0); + ssleep(1); + + macio_set_drvdata(mdev, NULL); + free_orinocodev(priv); + + return 0; +} + +static int airport_hard_reset(struct orinoco_private *priv) +{ + /* It would be nice to power cycle the Airport for a real hard + * reset, but for some reason although it appears to + * re-initialize properly, it falls in a screaming heap + * shortly afterwards. */ +#if 0 + struct airport *card = priv->card; + + /* Vitally important. If we don't do this it seems we get an + * interrupt somewhere during the power cycle, since + * hw_unavailable is already set it doesn't get ACKed, we get + * into an interrupt loop and the PMU decides to turn us + * off. */ + disable_irq(card->irq); + + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(card->mdev), 0, 0); + ssleep(1); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(card->mdev), 0, 1); + ssleep(1); + + enable_irq(card->irq); + ssleep(1); +#endif + + return 0; +} + +static int +airport_attach(struct macio_dev *mdev, const struct of_device_id *match) +{ + struct orinoco_private *priv; + struct airport *card; + unsigned long phys_addr; + struct hermes *hw; + + if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) { + printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n"); + return -ENODEV; + } + + /* Allocate space for private device-specific data */ + priv = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev, + airport_hard_reset, NULL); + if (!priv) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + return -ENODEV; + } + card = priv->card; + + hw = &priv->hw; + card->mdev = mdev; + + if (macio_request_resource(mdev, 0, DRIVER_NAME)) { + printk(KERN_ERR PFX "can't request IO resource !\n"); + free_orinocodev(priv); + return -EBUSY; + } + + macio_set_drvdata(mdev, priv); + + /* Setup interrupts & base address */ + card->irq = macio_irq(mdev, 0); + phys_addr = macio_resource_start(mdev, 0); /* Physical address */ + printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr); + card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN); + if (!card->vaddr) { + printk(KERN_ERR PFX "ioremap() failed\n"); + goto failed; + } + + hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING); + + /* Power up card */ + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 1); + ssleep(1); + + /* Reset it before we get the interrupt */ + hw->ops->init(hw); + + if (request_irq(card->irq, orinoco_interrupt, 0, DRIVER_NAME, priv)) { + printk(KERN_ERR PFX "Couldn't get IRQ %d\n", card->irq); + goto failed; + } + card->irq_requested = 1; + + /* Initialise the main driver */ + if (orinoco_init(priv) != 0) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); + goto failed; + } + + /* Register an interface with the stack */ + if (orinoco_if_add(priv, phys_addr, card->irq, NULL) != 0) { + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); + goto failed; + } + card->ndev_registered = 1; + return 0; + failed: + airport_detach(mdev); + return -ENODEV; +} /* airport_attach */ + + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Benjamin Herrenschmidt <benh@kernel.crashing.org>)"; +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_DESCRIPTION("Driver for the Apple Airport wireless card."); +MODULE_LICENSE("Dual MPL/GPL"); + +static const struct of_device_id airport_match[] = { + { + .name = "radio", + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, airport_match); + +static struct macio_driver airport_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = airport_match, + }, + .probe = airport_attach, + .remove = airport_detach, + .suspend = airport_suspend, + .resume = airport_resume, +}; + +static int __init +init_airport(void) +{ + printk(KERN_DEBUG "%s\n", version); + + return macio_register_driver(&airport_driver); +} + +static void __exit +exit_airport(void) +{ + macio_unregister_driver(&airport_driver); +} + +module_init(init_airport); +module_exit(exit_airport); diff --git a/drivers/net/wireless/intersil/orinoco/cfg.c b/drivers/net/wireless/intersil/orinoco/cfg.c new file mode 100644 index 000000000..0f6ea316e --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/cfg.c @@ -0,0 +1,291 @@ +/* cfg80211 support + * + * See copyright notice in main.c + */ +#include <linux/ieee80211.h> +#include <net/cfg80211.h> +#include "hw.h" +#include "main.h" +#include "orinoco.h" + +#include "cfg.h" + +/* Supported bitrates. Must agree with hw.c */ +static struct ieee80211_rate orinoco_rates[] = { + { .bitrate = 10 }, + { .bitrate = 20 }, + { .bitrate = 55 }, + { .bitrate = 110 }, +}; + +static const void * const orinoco_wiphy_privid = &orinoco_wiphy_privid; + +/* Called after orinoco_private is allocated. */ +void orinoco_wiphy_init(struct wiphy *wiphy) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + + wiphy->privid = orinoco_wiphy_privid; + + set_wiphy_dev(wiphy, priv->dev); +} + +/* Called after firmware is initialised */ +int orinoco_wiphy_register(struct wiphy *wiphy) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + int i, channels = 0; + + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) + wiphy->max_scan_ssids = 1; + else + wiphy->max_scan_ssids = 0; + + wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + + /* TODO: should we set if we only have demo ad-hoc? + * (priv->has_port3) + */ + if (priv->has_ibss) + wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); + + if (!priv->broken_monitor || force_monitor) + wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); + + priv->band.bitrates = orinoco_rates; + priv->band.n_bitrates = ARRAY_SIZE(orinoco_rates); + + /* Only support channels allowed by the card EEPROM */ + for (i = 0; i < NUM_CHANNELS; i++) { + if (priv->channel_mask & (1 << i)) { + priv->channels[i].center_freq = + ieee80211_channel_to_frequency(i + 1, + IEEE80211_BAND_2GHZ); + channels++; + } + } + priv->band.channels = priv->channels; + priv->band.n_channels = channels; + + wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; + wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; + + i = 0; + if (priv->has_wep) { + priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP40; + i++; + + if (priv->has_big_wep) { + priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP104; + i++; + } + } + if (priv->has_wpa) { + priv->cipher_suites[i] = WLAN_CIPHER_SUITE_TKIP; + i++; + } + wiphy->cipher_suites = priv->cipher_suites; + wiphy->n_cipher_suites = i; + + wiphy->rts_threshold = priv->rts_thresh; + if (!priv->has_mwo) + wiphy->frag_threshold = priv->frag_thresh + 1; + wiphy->retry_short = priv->short_retry_limit; + wiphy->retry_long = priv->long_retry_limit; + + return wiphy_register(wiphy); +} + +static int orinoco_change_vif(struct wiphy *wiphy, struct net_device *dev, + enum nl80211_iftype type, u32 *flags, + struct vif_params *params) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + int err = 0; + unsigned long lock; + + if (orinoco_lock(priv, &lock) != 0) + return -EBUSY; + + switch (type) { + case NL80211_IFTYPE_ADHOC: + if (!priv->has_ibss && !priv->has_port3) + err = -EINVAL; + break; + + case NL80211_IFTYPE_STATION: + break; + + case NL80211_IFTYPE_MONITOR: + if (priv->broken_monitor && !force_monitor) { + wiphy_warn(wiphy, + "Monitor mode support is buggy in this firmware, not enabling\n"); + err = -EINVAL; + } + break; + + default: + err = -EINVAL; + } + + if (!err) { + priv->iw_mode = type; + set_port_type(priv); + err = orinoco_commit(priv); + } + + orinoco_unlock(priv, &lock); + + return err; +} + +static int orinoco_scan(struct wiphy *wiphy, + struct cfg80211_scan_request *request) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + int err; + + if (!request) + return -EINVAL; + + if (priv->scan_request && priv->scan_request != request) + return -EBUSY; + + priv->scan_request = request; + + err = orinoco_hw_trigger_scan(priv, request->ssids); + /* On error the we aren't processing the request */ + if (err) + priv->scan_request = NULL; + + return err; +} + +static int orinoco_set_monitor_channel(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + int err = 0; + unsigned long flags; + int channel; + + if (!chandef->chan) + return -EINVAL; + + if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT) + return -EINVAL; + + if (chandef->chan->band != IEEE80211_BAND_2GHZ) + return -EINVAL; + + channel = ieee80211_frequency_to_channel(chandef->chan->center_freq); + + if ((channel < 1) || (channel > NUM_CHANNELS) || + !(priv->channel_mask & (1 << (channel - 1)))) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->channel = channel; + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { + /* Fast channel change - no commit if successful */ + struct hermes *hw = &priv->hw; + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_SET_CHANNEL, + channel, NULL); + } + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_set_wiphy_params(struct wiphy *wiphy, u32 changed) +{ + struct orinoco_private *priv = wiphy_priv(wiphy); + int frag_value = -1; + int rts_value = -1; + int err = 0; + + if (changed & WIPHY_PARAM_RETRY_SHORT) { + /* Setting short retry not supported */ + err = -EINVAL; + } + + if (changed & WIPHY_PARAM_RETRY_LONG) { + /* Setting long retry not supported */ + err = -EINVAL; + } + + if (changed & WIPHY_PARAM_FRAG_THRESHOLD) { + /* Set fragmentation */ + if (priv->has_mwo) { + if (wiphy->frag_threshold == -1) + frag_value = 0; + else { + printk(KERN_WARNING "%s: Fixed fragmentation " + "is not supported on this firmware. " + "Using MWO robust instead.\n", + priv->ndev->name); + frag_value = 1; + } + } else { + if (wiphy->frag_threshold == -1) + frag_value = 2346; + else if ((wiphy->frag_threshold < 257) || + (wiphy->frag_threshold > 2347)) + err = -EINVAL; + else + /* cfg80211 value is 257-2347 (odd only) + * orinoco rid has range 256-2346 (even only) */ + frag_value = wiphy->frag_threshold & ~0x1; + } + } + + if (changed & WIPHY_PARAM_RTS_THRESHOLD) { + /* Set RTS. + * + * Prism documentation suggests default of 2432, + * and a range of 0-3000. + * + * Current implementation uses 2347 as the default and + * the upper limit. + */ + + if (wiphy->rts_threshold == -1) + rts_value = 2347; + else if (wiphy->rts_threshold > 2347) + err = -EINVAL; + else + rts_value = wiphy->rts_threshold; + } + + if (!err) { + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (frag_value >= 0) { + if (priv->has_mwo) + priv->mwo_robust = frag_value; + else + priv->frag_thresh = frag_value; + } + if (rts_value >= 0) + priv->rts_thresh = rts_value; + + err = orinoco_commit(priv); + + orinoco_unlock(priv, &flags); + } + + return err; +} + +const struct cfg80211_ops orinoco_cfg_ops = { + .change_virtual_intf = orinoco_change_vif, + .set_monitor_channel = orinoco_set_monitor_channel, + .scan = orinoco_scan, + .set_wiphy_params = orinoco_set_wiphy_params, +}; diff --git a/drivers/net/wireless/intersil/orinoco/cfg.h b/drivers/net/wireless/intersil/orinoco/cfg.h new file mode 100644 index 000000000..3ddc96a06 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/cfg.h @@ -0,0 +1,15 @@ +/* cfg80211 support. + * + * See copyright notice in main.c + */ +#ifndef ORINOCO_CFG_H +#define ORINOCO_CFG_H + +#include <net/cfg80211.h> + +extern const struct cfg80211_ops orinoco_cfg_ops; + +void orinoco_wiphy_init(struct wiphy *wiphy); +int orinoco_wiphy_register(struct wiphy *wiphy); + +#endif /* ORINOCO_CFG_H */ diff --git a/drivers/net/wireless/intersil/orinoco/fw.c b/drivers/net/wireless/intersil/orinoco/fw.c new file mode 100644 index 000000000..ea29dccd5 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/fw.c @@ -0,0 +1,382 @@ +/* Firmware file reading and download helpers + * + * See copyright notice in main.c + */ +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/firmware.h> +#include <linux/device.h> +#include <linux/module.h> + +#include "hermes.h" +#include "hermes_dld.h" +#include "orinoco.h" + +#include "fw.h" + +/* End markers (for Symbol firmware only) */ +#define TEXT_END 0x1A /* End of text header */ + +struct fw_info { + char *pri_fw; + char *sta_fw; + char *ap_fw; + u32 pda_addr; + u16 pda_size; +}; + +static const struct fw_info orinoco_fw[] = { + { NULL, "/*(DEBLOBBED)*/", "/*(DEBLOBBED)*/", 0x00390000, 1000 }, + { NULL, "/*(DEBLOBBED)*/", "/*(DEBLOBBED)*/", 0, 1024 }, + { "/*(DEBLOBBED)*/", "/*(DEBLOBBED)*/", NULL, 0x00003100, 512 } +}; +/*(DEBLOBBED)*/ + +/* Structure used to access fields in FW + * Make sure LE decoding macros are used + */ +struct orinoco_fw_header { + char hdr_vers[6]; /* ASCII string for header version */ + __le16 headersize; /* Total length of header */ + __le32 entry_point; /* NIC entry point */ + __le32 blocks; /* Number of blocks to program */ + __le32 block_offset; /* Offset of block data from eof header */ + __le32 pdr_offset; /* Offset to PDR data from eof header */ + __le32 pri_offset; /* Offset to primary plug data */ + __le32 compat_offset; /* Offset to compatibility data*/ + char signature[0]; /* FW signature length headersize-20 */ +} __packed; + +/* Check the range of various header entries. Return a pointer to a + * description of the problem, or NULL if everything checks out. */ +static const char *validate_fw(const struct orinoco_fw_header *hdr, size_t len) +{ + u16 hdrsize; + + if (len < sizeof(*hdr)) + return "image too small"; + if (memcmp(hdr->hdr_vers, "HFW", 3) != 0) + return "format not recognised"; + + hdrsize = le16_to_cpu(hdr->headersize); + if (hdrsize > len) + return "bad headersize"; + if ((hdrsize + le32_to_cpu(hdr->block_offset)) > len) + return "bad block offset"; + if ((hdrsize + le32_to_cpu(hdr->pdr_offset)) > len) + return "bad PDR offset"; + if ((hdrsize + le32_to_cpu(hdr->pri_offset)) > len) + return "bad PRI offset"; + if ((hdrsize + le32_to_cpu(hdr->compat_offset)) > len) + return "bad compat offset"; + + /* TODO: consider adding a checksum or CRC to the firmware format */ + return NULL; +} + +#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) +static inline const struct firmware * +orinoco_cached_fw_get(struct orinoco_private *priv, bool primary) +{ + if (primary) + return priv->cached_pri_fw; + else + return priv->cached_fw; +} +#else +#define orinoco_cached_fw_get(priv, primary) (NULL) +#endif + +/* Download either STA or AP firmware into the card. */ +static int +orinoco_dl_firmware(struct orinoco_private *priv, + const struct fw_info *fw, + int ap) +{ + /* Plug Data Area (PDA) */ + __le16 *pda; + + struct hermes *hw = &priv->hw; + const struct firmware *fw_entry; + const struct orinoco_fw_header *hdr; + const unsigned char *first_block; + const void *end; + const char *firmware; + const char *fw_err; + struct device *dev = priv->dev; + int err = 0; + + pda = kzalloc(fw->pda_size, GFP_KERNEL); + if (!pda) + return -ENOMEM; + + if (ap) + firmware = fw->ap_fw; + else + firmware = fw->sta_fw; + + dev_dbg(dev, "Attempting to download firmware %s\n", firmware); + + /* Read current plug data */ + err = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size); + dev_dbg(dev, "Read PDA returned %d\n", err); + if (err) + goto free; + + if (!orinoco_cached_fw_get(priv, false)) { + err = reject_firmware(&fw_entry, firmware, priv->dev); + + if (err) { + dev_err(dev, "Cannot find firmware %s\n", firmware); + err = -ENOENT; + goto free; + } + } else + fw_entry = orinoco_cached_fw_get(priv, false); + + hdr = (const struct orinoco_fw_header *) fw_entry->data; + + fw_err = validate_fw(hdr, fw_entry->size); + if (fw_err) { + dev_warn(dev, "Invalid firmware image detected (%s). " + "Aborting download\n", fw_err); + err = -EINVAL; + goto abort; + } + + /* Enable aux port to allow programming */ + err = hw->ops->program_init(hw, le32_to_cpu(hdr->entry_point)); + dev_dbg(dev, "Program init returned %d\n", err); + if (err != 0) + goto abort; + + /* Program data */ + first_block = (fw_entry->data + + le16_to_cpu(hdr->headersize) + + le32_to_cpu(hdr->block_offset)); + end = fw_entry->data + fw_entry->size; + + err = hermes_program(hw, first_block, end); + dev_dbg(dev, "Program returned %d\n", err); + if (err != 0) + goto abort; + + /* Update production data */ + first_block = (fw_entry->data + + le16_to_cpu(hdr->headersize) + + le32_to_cpu(hdr->pdr_offset)); + + err = hermes_apply_pda_with_defaults(hw, first_block, end, pda, + &pda[fw->pda_size / sizeof(*pda)]); + dev_dbg(dev, "Apply PDA returned %d\n", err); + if (err) + goto abort; + + /* Tell card we've finished */ + err = hw->ops->program_end(hw); + dev_dbg(dev, "Program end returned %d\n", err); + if (err != 0) + goto abort; + + /* Check if we're running */ + dev_dbg(dev, "hermes_present returned %d\n", hermes_present(hw)); + +abort: + /* If we requested the firmware, release it. */ + if (!orinoco_cached_fw_get(priv, false)) + release_firmware(fw_entry); + +free: + kfree(pda); + return err; +} + +/* + * Process a firmware image - stop the card, load the firmware, reset + * the card and make sure it responds. For the secondary firmware take + * care of the PDA - read it and then write it on top of the firmware. + */ +static int +symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw, + const unsigned char *image, const void *end, + int secondary) +{ + struct hermes *hw = &priv->hw; + int ret = 0; + const unsigned char *ptr; + const unsigned char *first_block; + + /* Plug Data Area (PDA) */ + __le16 *pda = NULL; + + /* Binary block begins after the 0x1A marker */ + ptr = image; + while (*ptr++ != TEXT_END); + first_block = ptr; + + /* Read the PDA from EEPROM */ + if (secondary) { + pda = kzalloc(fw->pda_size, GFP_KERNEL); + if (!pda) + return -ENOMEM; + + ret = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size); + if (ret) + goto free; + } + + /* Stop the firmware, so that it can be safely rewritten */ + if (priv->stop_fw) { + ret = priv->stop_fw(priv, 1); + if (ret) + goto free; + } + + /* Program the adapter with new firmware */ + ret = hermes_program(hw, first_block, end); + if (ret) + goto free; + + /* Write the PDA to the adapter */ + if (secondary) { + size_t len = hermes_blocks_length(first_block, end); + ptr = first_block + len; + ret = hermes_apply_pda(hw, ptr, end, pda, + &pda[fw->pda_size / sizeof(*pda)]); + kfree(pda); + if (ret) + return ret; + } + + /* Run the firmware */ + if (priv->stop_fw) { + ret = priv->stop_fw(priv, 0); + if (ret) + return ret; + } + + /* Reset hermes chip and make sure it responds */ + ret = hw->ops->init(hw); + + /* hermes_reset() should return 0 with the secondary firmware */ + if (secondary && ret != 0) + return -ENODEV; + + /* And this should work with any firmware */ + if (!hermes_present(hw)) + return -ENODEV; + + return 0; + +free: + kfree(pda); + return ret; +} + + +/* + * Download the firmware into the card, this also does a PCMCIA soft + * reset on the card, to make sure it's in a sane state. + */ +static int +symbol_dl_firmware(struct orinoco_private *priv, + const struct fw_info *fw) +{ + struct device *dev = priv->dev; + int ret; + const struct firmware *fw_entry; + + if (!orinoco_cached_fw_get(priv, true)) { + if (reject_firmware(&fw_entry, fw->pri_fw, priv->dev) != 0) { + dev_err(dev, "Cannot find firmware: %s\n", fw->pri_fw); + return -ENOENT; + } + } else + fw_entry = orinoco_cached_fw_get(priv, true); + + /* Load primary firmware */ + ret = symbol_dl_image(priv, fw, fw_entry->data, + fw_entry->data + fw_entry->size, 0); + + if (!orinoco_cached_fw_get(priv, true)) + release_firmware(fw_entry); + if (ret) { + dev_err(dev, "Primary firmware download failed\n"); + return ret; + } + + if (!orinoco_cached_fw_get(priv, false)) { + if (reject_firmware(&fw_entry, fw->sta_fw, priv->dev) != 0) { + dev_err(dev, "Cannot find firmware: %s\n", fw->sta_fw); + return -ENOENT; + } + } else + fw_entry = orinoco_cached_fw_get(priv, false); + + /* Load secondary firmware */ + ret = symbol_dl_image(priv, fw, fw_entry->data, + fw_entry->data + fw_entry->size, 1); + if (!orinoco_cached_fw_get(priv, false)) + release_firmware(fw_entry); + if (ret) + dev_err(dev, "Secondary firmware download failed\n"); + + return ret; +} + +int orinoco_download(struct orinoco_private *priv) +{ + int err = 0; + /* Reload firmware */ + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* case FIRMWARE_TYPE_INTERSIL: */ + err = orinoco_dl_firmware(priv, + &orinoco_fw[priv->firmware_type], 0); + break; + + case FIRMWARE_TYPE_SYMBOL: + err = symbol_dl_firmware(priv, + &orinoco_fw[priv->firmware_type]); + break; + case FIRMWARE_TYPE_INTERSIL: + break; + } + /* TODO: if we fail we probably need to reinitialise + * the driver */ + + return err; +} + +#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) +void orinoco_cache_fw(struct orinoco_private *priv, int ap) +{ + const struct firmware *fw_entry = NULL; + const char *pri_fw; + const char *fw; + + pri_fw = orinoco_fw[priv->firmware_type].pri_fw; + if (ap) + fw = orinoco_fw[priv->firmware_type].ap_fw; + else + fw = orinoco_fw[priv->firmware_type].sta_fw; + + if (pri_fw) { + if (reject_firmware(&fw_entry, pri_fw, priv->dev) == 0) + priv->cached_pri_fw = fw_entry; + } + + if (fw) { + if (reject_firmware(&fw_entry, fw, priv->dev) == 0) + priv->cached_fw = fw_entry; + } +} + +void orinoco_uncache_fw(struct orinoco_private *priv) +{ + release_firmware(priv->cached_pri_fw); + release_firmware(priv->cached_fw); + priv->cached_pri_fw = NULL; + priv->cached_fw = NULL; +} +#endif diff --git a/drivers/net/wireless/intersil/orinoco/fw.h b/drivers/net/wireless/intersil/orinoco/fw.h new file mode 100644 index 000000000..aca63e3c4 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/fw.h @@ -0,0 +1,21 @@ +/* Firmware file reading and download helpers + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_FW_H_ +#define _ORINOCO_FW_H_ + +/* Forward declations */ +struct orinoco_private; + +int orinoco_download(struct orinoco_private *priv); + +#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) +void orinoco_cache_fw(struct orinoco_private *priv, int ap); +void orinoco_uncache_fw(struct orinoco_private *priv); +#else +#define orinoco_cache_fw(priv, ap) do { } while (0) +#define orinoco_uncache_fw(priv) do { } while (0) +#endif + +#endif /* _ORINOCO_FW_H_ */ diff --git a/drivers/net/wireless/intersil/orinoco/hermes.c b/drivers/net/wireless/intersil/orinoco/hermes.c new file mode 100644 index 000000000..43790fbea --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/hermes.c @@ -0,0 +1,777 @@ +/* hermes.c + * + * Driver core for the "Hermes" wireless MAC controller, as used in + * the Lucent Orinoco and Cabletron RoamAbout cards. It should also + * work on the hfa3841 and hfa3842 MAC controller chips used in the + * Prism II chipsets. + * + * This is not a complete driver, just low-level access routines for + * the MAC controller itself. + * + * Based on the prism2 driver from Absolute Value Systems' linux-wlan + * project, the Linux wvlan_cs driver, Lucent's HCF-Light + * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no + * particular order). + * + * Copyright (C) 2000, David Gibson, Linuxcare Australia. + * (C) Copyright David Gibson, IBM Corp. 2001-2003. + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> + +#include "hermes.h" + +/* These are maximum timeouts. Most often, card wil react much faster */ +#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */ +#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */ +#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */ +#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */ + +/* + * AUX port access. To unlock the AUX port write the access keys to the + * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL + * register. Then read it and make sure it's HERMES_AUX_ENABLED. + */ +#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ +#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ +#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ +#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */ + +#define HERMES_AUX_PW0 0xFE01 +#define HERMES_AUX_PW1 0xDC23 +#define HERMES_AUX_PW2 0xBA45 + +/* HERMES_CMD_DOWNLD */ +#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD) + +/* + * Debugging helpers + */ + +#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \ + printk(stuff); } while (0) + +#undef HERMES_DEBUG +#ifdef HERMES_DEBUG +#include <stdarg.h> + +#define DEBUG(lvl, stuff...) if ((lvl) <= HERMES_DEBUG) DMSG(stuff) + +#else /* ! HERMES_DEBUG */ + +#define DEBUG(lvl, stuff...) do { } while (0) + +#endif /* ! HERMES_DEBUG */ + +static const struct hermes_ops hermes_ops_local; + +/* + * Internal functions + */ + +/* Issue a command to the chip. Waiting for it to complete is the caller's + problem. + + Returns -EBUSY if the command register is busy, 0 on success. + + Callable from any context. +*/ +static int hermes_issue_cmd(struct hermes *hw, u16 cmd, u16 param0, + u16 param1, u16 param2) +{ + int k = CMD_BUSY_TIMEOUT; + u16 reg; + + /* First wait for the command register to unbusy */ + reg = hermes_read_regn(hw, CMD); + while ((reg & HERMES_CMD_BUSY) && k) { + k--; + udelay(1); + reg = hermes_read_regn(hw, CMD); + } + if (reg & HERMES_CMD_BUSY) + return -EBUSY; + + hermes_write_regn(hw, PARAM2, param2); + hermes_write_regn(hw, PARAM1, param1); + hermes_write_regn(hw, PARAM0, param0); + hermes_write_regn(hw, CMD, cmd); + + return 0; +} + +/* + * Function definitions + */ + +/* For doing cmds that wipe the magic constant in SWSUPPORT0 */ +static int hermes_doicmd_wait(struct hermes *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp) +{ + int err = 0; + int k; + u16 status, reg; + + err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2); + if (err) + return err; + + reg = hermes_read_regn(hw, EVSTAT); + k = CMD_INIT_TIMEOUT; + while ((!(reg & HERMES_EV_CMD)) && k) { + k--; + udelay(10); + reg = hermes_read_regn(hw, EVSTAT); + } + + hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); + + if (!hermes_present(hw)) { + DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n", + hw->iobase); + err = -ENODEV; + goto out; + } + + if (!(reg & HERMES_EV_CMD)) { + printk(KERN_ERR "hermes @ %p: " + "Timeout waiting for card to reset (reg=0x%04x)!\n", + hw->iobase, reg); + err = -ETIMEDOUT; + goto out; + } + + status = hermes_read_regn(hw, STATUS); + if (resp) { + resp->status = status; + resp->resp0 = hermes_read_regn(hw, RESP0); + resp->resp1 = hermes_read_regn(hw, RESP1); + resp->resp2 = hermes_read_regn(hw, RESP2); + } + + hermes_write_regn(hw, EVACK, HERMES_EV_CMD); + + if (status & HERMES_STATUS_RESULT) + err = -EIO; +out: + return err; +} + +void hermes_struct_init(struct hermes *hw, void __iomem *address, + int reg_spacing) +{ + hw->iobase = address; + hw->reg_spacing = reg_spacing; + hw->inten = 0x0; + hw->eeprom_pda = false; + hw->ops = &hermes_ops_local; +} +EXPORT_SYMBOL(hermes_struct_init); + +static int hermes_init(struct hermes *hw) +{ + u16 reg; + int err = 0; + int k; + + /* We don't want to be interrupted while resetting the chipset */ + hw->inten = 0x0; + hermes_write_regn(hw, INTEN, 0); + hermes_write_regn(hw, EVACK, 0xffff); + + /* Normally it's a "can't happen" for the command register to + be busy when we go to issue a command because we are + serializing all commands. However we want to have some + chance of resetting the card even if it gets into a stupid + state, so we actually wait to see if the command register + will unbusy itself here. */ + k = CMD_BUSY_TIMEOUT; + reg = hermes_read_regn(hw, CMD); + while (k && (reg & HERMES_CMD_BUSY)) { + if (reg == 0xffff) /* Special case - the card has probably been + removed, so don't wait for the timeout */ + return -ENODEV; + + k--; + udelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* No need to explicitly handle the timeout - if we've timed + out hermes_issue_cmd() will probably return -EBUSY below */ + + /* According to the documentation, EVSTAT may contain + obsolete event occurrence information. We have to acknowledge + it by writing EVACK. */ + reg = hermes_read_regn(hw, EVSTAT); + hermes_write_regn(hw, EVACK, reg); + + /* We don't use hermes_docmd_wait here, because the reset wipes + the magic constant in SWSUPPORT0 away, and it gets confused */ + err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL); + + return err; +} + +/* Issue a command to the chip, and (busy!) wait for it to + * complete. + * + * Returns: + * < 0 on internal error + * 0 on success + * > 0 on error returned by the firmware + * + * Callable from any context, but locking is your problem. */ +static int hermes_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0, + struct hermes_response *resp) +{ + int err; + int k; + u16 reg; + u16 status; + + err = hermes_issue_cmd(hw, cmd, parm0, 0, 0); + if (err) { + if (!hermes_present(hw)) { + if (net_ratelimit()) + printk(KERN_WARNING "hermes @ %p: " + "Card removed while issuing command " + "0x%04x.\n", hw->iobase, cmd); + err = -ENODEV; + } else + if (net_ratelimit()) + printk(KERN_ERR "hermes @ %p: " + "Error %d issuing command 0x%04x.\n", + hw->iobase, err, cmd); + goto out; + } + + reg = hermes_read_regn(hw, EVSTAT); + k = CMD_COMPL_TIMEOUT; + while ((!(reg & HERMES_EV_CMD)) && k) { + k--; + udelay(10); + reg = hermes_read_regn(hw, EVSTAT); + } + + if (!hermes_present(hw)) { + printk(KERN_WARNING "hermes @ %p: Card removed " + "while waiting for command 0x%04x completion.\n", + hw->iobase, cmd); + err = -ENODEV; + goto out; + } + + if (!(reg & HERMES_EV_CMD)) { + printk(KERN_ERR "hermes @ %p: Timeout waiting for " + "command 0x%04x completion.\n", hw->iobase, cmd); + err = -ETIMEDOUT; + goto out; + } + + status = hermes_read_regn(hw, STATUS); + if (resp) { + resp->status = status; + resp->resp0 = hermes_read_regn(hw, RESP0); + resp->resp1 = hermes_read_regn(hw, RESP1); + resp->resp2 = hermes_read_regn(hw, RESP2); + } + + hermes_write_regn(hw, EVACK, HERMES_EV_CMD); + + if (status & HERMES_STATUS_RESULT) + err = -EIO; + + out: + return err; +} + +static int hermes_allocate(struct hermes *hw, u16 size, u16 *fid) +{ + int err = 0; + int k; + u16 reg; + + if ((size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX)) + return -EINVAL; + + err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL); + if (err) + return err; + + reg = hermes_read_regn(hw, EVSTAT); + k = ALLOC_COMPL_TIMEOUT; + while ((!(reg & HERMES_EV_ALLOC)) && k) { + k--; + udelay(10); + reg = hermes_read_regn(hw, EVSTAT); + } + + if (!hermes_present(hw)) { + printk(KERN_WARNING "hermes @ %p: " + "Card removed waiting for frame allocation.\n", + hw->iobase); + return -ENODEV; + } + + if (!(reg & HERMES_EV_ALLOC)) { + printk(KERN_ERR "hermes @ %p: " + "Timeout waiting for frame allocation\n", + hw->iobase); + return -ETIMEDOUT; + } + + *fid = hermes_read_regn(hw, ALLOCFID); + hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC); + + return 0; +} + +/* Set up a BAP to read a particular chunk of data from card's internal buffer. + * + * Returns: + * < 0 on internal failure (errno) + * 0 on success + * > 0 on error + * from firmware + * + * Callable from any context */ +static int hermes_bap_seek(struct hermes *hw, int bap, u16 id, u16 offset) +{ + int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0; + int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0; + int k; + u16 reg; + + /* Paranoia.. */ + if ((offset > HERMES_BAP_OFFSET_MAX) || (offset % 2)) + return -EINVAL; + + k = HERMES_BAP_BUSY_TIMEOUT; + reg = hermes_read_reg(hw, oreg); + while ((reg & HERMES_OFFSET_BUSY) && k) { + k--; + udelay(1); + reg = hermes_read_reg(hw, oreg); + } + + if (reg & HERMES_OFFSET_BUSY) + return -ETIMEDOUT; + + /* Now we actually set up the transfer */ + hermes_write_reg(hw, sreg, id); + hermes_write_reg(hw, oreg, offset); + + /* Wait for the BAP to be ready */ + k = HERMES_BAP_BUSY_TIMEOUT; + reg = hermes_read_reg(hw, oreg); + while ((reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) { + k--; + udelay(1); + reg = hermes_read_reg(hw, oreg); + } + + if (reg != offset) { + printk(KERN_ERR "hermes @ %p: BAP%d offset %s: " + "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap, + (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error", + reg, id, offset); + + if (reg & HERMES_OFFSET_BUSY) + return -ETIMEDOUT; + + return -EIO; /* error or wrong offset */ + } + + return 0; +} + +/* Read a block of data from the chip's buffer, via the + * BAP. Synchronization/serialization is the caller's problem. len + * must be even. + * + * Returns: + * < 0 on internal failure (errno) + * 0 on success + * > 0 on error from firmware + */ +static int hermes_bap_pread(struct hermes *hw, int bap, void *buf, int len, + u16 id, u16 offset) +{ + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + int err = 0; + + if ((len < 0) || (len % 2)) + return -EINVAL; + + err = hermes_bap_seek(hw, bap, id, offset); + if (err) + goto out; + + /* Actually do the transfer */ + hermes_read_words(hw, dreg, buf, len / 2); + + out: + return err; +} + +/* Write a block of data to the chip's buffer, via the + * BAP. Synchronization/serialization is the caller's problem. + * + * Returns: + * < 0 on internal failure (errno) + * 0 on success + * > 0 on error from firmware + */ +static int hermes_bap_pwrite(struct hermes *hw, int bap, const void *buf, + int len, u16 id, u16 offset) +{ + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + int err = 0; + + if (len < 0) + return -EINVAL; + + err = hermes_bap_seek(hw, bap, id, offset); + if (err) + goto out; + + /* Actually do the transfer */ + hermes_write_bytes(hw, dreg, buf, len); + + out: + return err; +} + +/* Read a Length-Type-Value record from the card. + * + * If length is NULL, we ignore the length read from the card, and + * read the entire buffer regardless. This is useful because some of + * the configuration records appear to have incorrect lengths in + * practice. + * + * Callable from user or bh context. */ +static int hermes_read_ltv(struct hermes *hw, int bap, u16 rid, + unsigned bufsize, u16 *length, void *buf) +{ + int err = 0; + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + u16 rlength, rtype; + unsigned nwords; + + if (bufsize % 2) + return -EINVAL; + + err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL); + if (err) + return err; + + err = hermes_bap_seek(hw, bap, rid, 0); + if (err) + return err; + + rlength = hermes_read_reg(hw, dreg); + + if (!rlength) + return -ENODATA; + + rtype = hermes_read_reg(hw, dreg); + + if (length) + *length = rlength; + + if (rtype != rid) + printk(KERN_WARNING "hermes @ %p: %s(): " + "rid (0x%04x) does not match type (0x%04x)\n", + hw->iobase, __func__, rid, rtype); + if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize) + printk(KERN_WARNING "hermes @ %p: " + "Truncating LTV record from %d to %d bytes. " + "(rid=0x%04x, len=0x%04x)\n", hw->iobase, + HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength); + + nwords = min((unsigned)rlength - 1, bufsize / 2); + hermes_read_words(hw, dreg, buf, nwords); + + return 0; +} + +static int hermes_write_ltv(struct hermes *hw, int bap, u16 rid, + u16 length, const void *value) +{ + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + int err = 0; + unsigned count; + + if (length == 0) + return -EINVAL; + + err = hermes_bap_seek(hw, bap, rid, 0); + if (err) + return err; + + hermes_write_reg(hw, dreg, length); + hermes_write_reg(hw, dreg, rid); + + count = length - 1; + + hermes_write_bytes(hw, dreg, value, count << 1); + + err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE, + rid, NULL); + + return err; +} + +/*** Hermes AUX control ***/ + +static inline void +hermes_aux_setaddr(struct hermes *hw, u32 addr) +{ + hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); + hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); +} + +static inline int +hermes_aux_control(struct hermes *hw, int enabled) +{ + int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED; + int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE; + int i; + + /* Already open? */ + if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state) + return 0; + + hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); + hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); + hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); + hermes_write_reg(hw, HERMES_CONTROL, action); + + for (i = 0; i < 20; i++) { + udelay(10); + if (hermes_read_reg(hw, HERMES_CONTROL) == + desired_state) + return 0; + } + + return -EBUSY; +} + +/*** Hermes programming ***/ + +/* About to start programming data (Hermes I) + * offset is the entry point + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +static int hermesi_program_init(struct hermes *hw, u32 offset) +{ + int err; + + /* Disable interrupts?*/ + /*hw->inten = 0x0;*/ + /*hermes_write_regn(hw, INTEN, 0);*/ + /*hermes_set_irqmask(hw, 0);*/ + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Using init_cmd_wait rather than cmd_wait */ + err = hw->ops->init_cmd_wait(hw, + 0x0100 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hw->ops->init_cmd_wait(hw, + 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hermes_aux_control(hw, 1); + pr_debug("AUX enable returned %d\n", err); + + if (err) + return err; + + pr_debug("Enabling volatile, EP 0x%08x\n", offset); + err = hw->ops->init_cmd_wait(hw, + HERMES_PROGRAM_ENABLE_VOLATILE, + offset & 0xFFFFu, + offset >> 16, + 0, + NULL); + pr_debug("PROGRAM_ENABLE returned %d\n", err); + + return err; +} + +/* Done programming data (Hermes I) + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +static int hermesi_program_end(struct hermes *hw) +{ + struct hermes_response resp; + int rc = 0; + int err; + + rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); + + pr_debug("PROGRAM_DISABLE returned %d, " + "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", + rc, resp.resp0, resp.resp1, resp.resp2); + + if ((rc == 0) && + ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD)) + rc = -EIO; + + err = hermes_aux_control(hw, 0); + pr_debug("AUX disable returned %d\n", err); + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Reinitialise, ignoring return */ + (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + + return rc ? rc : err; +} + +static int hermes_program_bytes(struct hermes *hw, const char *data, + u32 addr, u32 len) +{ + /* wl lkm splits the programming into chunks of 2000 bytes. + * This restriction appears to come from USB. The PCMCIA + * adapters can program the whole lot in one go */ + hermes_aux_setaddr(hw, addr); + hermes_write_bytes(hw, HERMES_AUXDATA, data, len); + return 0; +} + +/* Read PDA from the adapter */ +static int hermes_read_pda(struct hermes *hw, __le16 *pda, u32 pda_addr, + u16 pda_len) +{ + int ret; + u16 pda_size; + u16 data_len = pda_len; + __le16 *data = pda; + + if (hw->eeprom_pda) { + /* PDA of spectrum symbol is in eeprom */ + + /* Issue command to read EEPROM */ + ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); + if (ret) + return ret; + } else { + /* wl_lkm does not include PDA size in the PDA area. + * We will pad the information into pda, so other routines + * don't have to be modified */ + pda[0] = cpu_to_le16(pda_len - 2); + /* Includes CFG_PROD_DATA but not itself */ + pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ + data_len = pda_len - 4; + data = pda + 2; + } + + /* Open auxiliary port */ + ret = hermes_aux_control(hw, 1); + pr_debug("AUX enable returned %d\n", ret); + if (ret) + return ret; + + /* Read PDA */ + hermes_aux_setaddr(hw, pda_addr); + hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2); + + /* Close aux port */ + ret = hermes_aux_control(hw, 0); + pr_debug("AUX disable returned %d\n", ret); + + /* Check PDA length */ + pda_size = le16_to_cpu(pda[0]); + pr_debug("Actual PDA length %d, Max allowed %d\n", + pda_size, pda_len); + if (pda_size > pda_len) + return -EINVAL; + + return 0; +} + +static void hermes_lock_irqsave(spinlock_t *lock, + unsigned long *flags) __acquires(lock) +{ + spin_lock_irqsave(lock, *flags); +} + +static void hermes_unlock_irqrestore(spinlock_t *lock, + unsigned long *flags) __releases(lock) +{ + spin_unlock_irqrestore(lock, *flags); +} + +static void hermes_lock_irq(spinlock_t *lock) __acquires(lock) +{ + spin_lock_irq(lock); +} + +static void hermes_unlock_irq(spinlock_t *lock) __releases(lock) +{ + spin_unlock_irq(lock); +} + +/* Hermes operations for local buses */ +static const struct hermes_ops hermes_ops_local = { + .init = hermes_init, + .cmd_wait = hermes_docmd_wait, + .init_cmd_wait = hermes_doicmd_wait, + .allocate = hermes_allocate, + .read_ltv = hermes_read_ltv, + .write_ltv = hermes_write_ltv, + .bap_pread = hermes_bap_pread, + .bap_pwrite = hermes_bap_pwrite, + .read_pda = hermes_read_pda, + .program_init = hermesi_program_init, + .program_end = hermesi_program_end, + .program = hermes_program_bytes, + .lock_irqsave = hermes_lock_irqsave, + .unlock_irqrestore = hermes_unlock_irqrestore, + .lock_irq = hermes_lock_irq, + .unlock_irq = hermes_unlock_irq, +}; diff --git a/drivers/net/wireless/intersil/orinoco/hermes.h b/drivers/net/wireless/intersil/orinoco/hermes.h new file mode 100644 index 000000000..28a42448d --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/hermes.h @@ -0,0 +1,520 @@ +/* hermes.h + * + * Driver core for the "Hermes" wireless MAC controller, as used in + * the Lucent Orinoco and Cabletron RoamAbout cards. It should also + * work on the hfa3841 and hfa3842 MAC controller chips used in the + * Prism I & II chipsets. + * + * This is not a complete driver, just low-level access routines for + * the MAC controller itself. + * + * Based on the prism2 driver from Absolute Value Systems' linux-wlan + * project, the Linux wvlan_cs driver, Lucent's HCF-Light + * (wvlan_hcf.c) library, and the NetBSD wireless driver. + * + * Copyright (C) 2000, David Gibson, Linuxcare Australia. + * (C) Copyright David Gibson, IBM Corp. 2001-2003. + * + * Portions taken from hfa384x.h. + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * + * This file distributed under the GPL, version 2. + */ + +#ifndef _HERMES_H +#define _HERMES_H + +/* Notes on locking: + * + * As a module of low level hardware access routines, there is no + * locking. Users of this module should ensure that they serialize + * access to the hermes structure, and to the hardware +*/ + +#include <linux/if_ether.h> +#include <linux/io.h> + +/* + * Limits and constants + */ +#define HERMES_ALLOC_LEN_MIN (4) +#define HERMES_ALLOC_LEN_MAX (2400) +#define HERMES_LTV_LEN_MAX (34) +#define HERMES_BAP_DATALEN_MAX (4096) +#define HERMES_BAP_OFFSET_MAX (4096) +#define HERMES_PORTID_MAX (7) +#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX + 1) +#define HERMES_PDR_LEN_MAX (260) /* in bytes, from EK */ +#define HERMES_PDA_RECS_MAX (200) /* a guess */ +#define HERMES_PDA_LEN_MAX (1024) /* in bytes, from EK */ +#define HERMES_SCANRESULT_MAX (35) +#define HERMES_CHINFORESULT_MAX (8) +#define HERMES_MAX_MULTICAST (16) +#define HERMES_MAGIC (0x7d1f) + +/* + * Hermes register offsets + */ +#define HERMES_CMD (0x00) +#define HERMES_PARAM0 (0x02) +#define HERMES_PARAM1 (0x04) +#define HERMES_PARAM2 (0x06) +#define HERMES_STATUS (0x08) +#define HERMES_RESP0 (0x0A) +#define HERMES_RESP1 (0x0C) +#define HERMES_RESP2 (0x0E) +#define HERMES_INFOFID (0x10) +#define HERMES_RXFID (0x20) +#define HERMES_ALLOCFID (0x22) +#define HERMES_TXCOMPLFID (0x24) +#define HERMES_SELECT0 (0x18) +#define HERMES_OFFSET0 (0x1C) +#define HERMES_DATA0 (0x36) +#define HERMES_SELECT1 (0x1A) +#define HERMES_OFFSET1 (0x1E) +#define HERMES_DATA1 (0x38) +#define HERMES_EVSTAT (0x30) +#define HERMES_INTEN (0x32) +#define HERMES_EVACK (0x34) +#define HERMES_CONTROL (0x14) +#define HERMES_SWSUPPORT0 (0x28) +#define HERMES_SWSUPPORT1 (0x2A) +#define HERMES_SWSUPPORT2 (0x2C) +#define HERMES_AUXPAGE (0x3A) +#define HERMES_AUXOFFSET (0x3C) +#define HERMES_AUXDATA (0x3E) + +/* + * CMD register bitmasks + */ +#define HERMES_CMD_BUSY (0x8000) +#define HERMES_CMD_AINFO (0x7f00) +#define HERMES_CMD_MACPORT (0x0700) +#define HERMES_CMD_RECL (0x0100) +#define HERMES_CMD_WRITE (0x0100) +#define HERMES_CMD_PROGMODE (0x0300) +#define HERMES_CMD_CMDCODE (0x003f) + +/* + * STATUS register bitmasks + */ +#define HERMES_STATUS_RESULT (0x7f00) +#define HERMES_STATUS_CMDCODE (0x003f) + +/* + * OFFSET register bitmasks + */ +#define HERMES_OFFSET_BUSY (0x8000) +#define HERMES_OFFSET_ERR (0x4000) +#define HERMES_OFFSET_DATAOFF (0x0ffe) + +/* + * Event register bitmasks (INTEN, EVSTAT, EVACK) + */ +#define HERMES_EV_TICK (0x8000) +#define HERMES_EV_WTERR (0x4000) +#define HERMES_EV_INFDROP (0x2000) +#define HERMES_EV_INFO (0x0080) +#define HERMES_EV_DTIM (0x0020) +#define HERMES_EV_CMD (0x0010) +#define HERMES_EV_ALLOC (0x0008) +#define HERMES_EV_TXEXC (0x0004) +#define HERMES_EV_TX (0x0002) +#define HERMES_EV_RX (0x0001) + +/* + * Command codes + */ +/*--- Controller Commands ----------------------------*/ +#define HERMES_CMD_INIT (0x0000) +#define HERMES_CMD_ENABLE (0x0001) +#define HERMES_CMD_DISABLE (0x0002) +#define HERMES_CMD_DIAG (0x0003) + +/*--- Buffer Mgmt Commands ---------------------------*/ +#define HERMES_CMD_ALLOC (0x000A) +#define HERMES_CMD_TX (0x000B) + +/*--- Regulate Commands ------------------------------*/ +#define HERMES_CMD_NOTIFY (0x0010) +#define HERMES_CMD_INQUIRE (0x0011) + +/*--- Configure Commands -----------------------------*/ +#define HERMES_CMD_ACCESS (0x0021) +#define HERMES_CMD_DOWNLD (0x0022) + +/*--- Serial I/O Commands ----------------------------*/ +#define HERMES_CMD_READMIF (0x0030) +#define HERMES_CMD_WRITEMIF (0x0031) + +/*--- Debugging Commands -----------------------------*/ +#define HERMES_CMD_TEST (0x0038) + + +/* Test command arguments */ +#define HERMES_TEST_SET_CHANNEL 0x0800 +#define HERMES_TEST_MONITOR 0x0b00 +#define HERMES_TEST_STOP 0x0f00 + +/* Authentication algorithms */ +#define HERMES_AUTH_OPEN 1 +#define HERMES_AUTH_SHARED_KEY 2 + +/* WEP settings */ +#define HERMES_WEP_PRIVACY_INVOKED 0x0001 +#define HERMES_WEP_EXCL_UNENCRYPTED 0x0002 +#define HERMES_WEP_HOST_ENCRYPT 0x0010 +#define HERMES_WEP_HOST_DECRYPT 0x0080 + +/* Symbol hostscan options */ +#define HERMES_HOSTSCAN_SYMBOL_5SEC 0x0001 +#define HERMES_HOSTSCAN_SYMBOL_ONCE 0x0002 +#define HERMES_HOSTSCAN_SYMBOL_PASSIVE 0x0040 +#define HERMES_HOSTSCAN_SYMBOL_BCAST 0x0080 + +/* + * Frame structures and constants + */ + +#define HERMES_DESCRIPTOR_OFFSET 0 +#define HERMES_802_11_OFFSET (14) +#define HERMES_802_3_OFFSET (14 + 32) +#define HERMES_802_2_OFFSET (14 + 32 + 14) +#define HERMES_TXCNTL2_OFFSET (HERMES_802_3_OFFSET - 2) + +#define HERMES_RXSTAT_ERR (0x0003) +#define HERMES_RXSTAT_BADCRC (0x0001) +#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002) +#define HERMES_RXSTAT_MIC (0x0010) /* Frame contains MIC */ +#define HERMES_RXSTAT_MACPORT (0x0700) +#define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */ +#define HERMES_RXSTAT_MIC_KEY_ID (0x1800) /* MIC key used */ +#define HERMES_RXSTAT_MSGTYPE (0xE000) +#define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */ +#define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */ +#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */ + +/* Shift amount for key ID in RXSTAT and TXCTRL */ +#define HERMES_MIC_KEY_ID_SHIFT 11 + +struct hermes_tx_descriptor { + __le16 status; + __le16 reserved1; + __le16 reserved2; + __le32 sw_support; + u8 retry_count; + u8 tx_rate; + __le16 tx_control; +} __packed; + +#define HERMES_TXSTAT_RETRYERR (0x0001) +#define HERMES_TXSTAT_AGEDERR (0x0002) +#define HERMES_TXSTAT_DISCON (0x0004) +#define HERMES_TXSTAT_FORMERR (0x0008) + +#define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */ +#define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */ +#define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */ +#define HERMES_TXCTRL_MIC (0x0010) /* 802.3 + TKIP */ +#define HERMES_TXCTRL_MIC_KEY_ID (0x1800) /* MIC Key ID mask */ +#define HERMES_TXCTRL_ALT_RTRY (0x0020) + +/* Inquiry constants and data types */ + +#define HERMES_INQ_TALLIES (0xF100) +#define HERMES_INQ_SCAN (0xF101) +#define HERMES_INQ_CHANNELINFO (0xF102) +#define HERMES_INQ_HOSTSCAN (0xF103) +#define HERMES_INQ_HOSTSCAN_SYMBOL (0xF104) +#define HERMES_INQ_LINKSTATUS (0xF200) +#define HERMES_INQ_SEC_STAT_AGERE (0xF202) + +struct hermes_tallies_frame { + __le16 TxUnicastFrames; + __le16 TxMulticastFrames; + __le16 TxFragments; + __le16 TxUnicastOctets; + __le16 TxMulticastOctets; + __le16 TxDeferredTransmissions; + __le16 TxSingleRetryFrames; + __le16 TxMultipleRetryFrames; + __le16 TxRetryLimitExceeded; + __le16 TxDiscards; + __le16 RxUnicastFrames; + __le16 RxMulticastFrames; + __le16 RxFragments; + __le16 RxUnicastOctets; + __le16 RxMulticastOctets; + __le16 RxFCSErrors; + __le16 RxDiscards_NoBuffer; + __le16 TxDiscardsWrongSA; + __le16 RxWEPUndecryptable; + __le16 RxMsgInMsgFragments; + __le16 RxMsgInBadMsgFragments; + /* Those last are probably not available in very old firmwares */ + __le16 RxDiscards_WEPICVError; + __le16 RxDiscards_WEPExcluded; +} __packed; + +/* Grabbed from wlan-ng - Thanks Mark... - Jean II + * This is the result of a scan inquiry command */ +/* Structure describing info about an Access Point */ +struct prism2_scan_apinfo { + __le16 channel; /* Channel where the AP sits */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ + u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ + __le16 essid_len; /* ESSID length */ + u8 essid[32]; /* ESSID of the network */ + u8 rates[10]; /* Bit rate supported */ + __le16 proberesp_rate; /* Data rate of the response frame */ + __le16 atim; /* ATIM window time, Kus (hostscan only) */ +} __packed; + +/* Same stuff for the Lucent/Agere card. + * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */ +struct agere_scan_apinfo { + __le16 channel; /* Channel where the AP sits */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ + u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ + /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ + __le16 essid_len; /* ESSID length */ + u8 essid[32]; /* ESSID of the network */ +} __packed; + +/* Moustafa: Scan structure for Symbol cards */ +struct symbol_scan_apinfo { + u8 channel; /* Channel where the AP sits */ + u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ + u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ + /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ + __le16 essid_len; /* ESSID length */ + u8 essid[32]; /* ESSID of the network */ + __le16 rates[5]; /* Bit rate supported */ + __le16 basic_rates; /* Basic rates bitmask */ + u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */ + u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */ +} __packed; + +union hermes_scan_info { + struct agere_scan_apinfo a; + struct prism2_scan_apinfo p; + struct symbol_scan_apinfo s; +}; + +/* Extended scan struct for HERMES_INQ_CHANNELINFO. + * wl_lkm calls this an ACS scan (Automatic Channel Select). + * Keep out of union hermes_scan_info because it is much bigger than + * the older scan structures. */ +struct agere_ext_scan_info { + __le16 reserved0; + + u8 noise; + u8 level; + u8 rx_flow; + u8 rate; + __le16 reserved1[2]; + + __le16 frame_control; + __le16 dur_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 bssid[ETH_ALEN]; + __le16 sequence; + u8 addr4[ETH_ALEN]; + + __le16 data_length; + + /* Next 3 fields do not get filled in. */ + u8 daddr[ETH_ALEN]; + u8 saddr[ETH_ALEN]; + __le16 len_type; + + __le64 timestamp; + __le16 beacon_interval; + __le16 capabilities; + u8 data[0]; +} __packed; + +#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000) +#define HERMES_LINKSTATUS_CONNECTED (0x0001) +#define HERMES_LINKSTATUS_DISCONNECTED (0x0002) +#define HERMES_LINKSTATUS_AP_CHANGE (0x0003) +#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004) +#define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005) +#define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006) + +struct hermes_linkstatus { + __le16 linkstatus; /* Link status */ +} __packed; + +struct hermes_response { + u16 status, resp0, resp1, resp2; +}; + +/* "ID" structure - used for ESSID and station nickname */ +struct hermes_idstring { + __le16 len; + __le16 val[16]; +} __packed; + +struct hermes_multicast { + u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN]; +} __packed; + +/* Timeouts */ +#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */ + +struct hermes; + +/* Functions to access hardware */ +struct hermes_ops { + int (*init)(struct hermes *hw); + int (*cmd_wait)(struct hermes *hw, u16 cmd, u16 parm0, + struct hermes_response *resp); + int (*init_cmd_wait)(struct hermes *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp); + int (*allocate)(struct hermes *hw, u16 size, u16 *fid); + int (*read_ltv)(struct hermes *hw, int bap, u16 rid, unsigned buflen, + u16 *length, void *buf); + int (*write_ltv)(struct hermes *hw, int bap, u16 rid, + u16 length, const void *value); + int (*bap_pread)(struct hermes *hw, int bap, void *buf, int len, + u16 id, u16 offset); + int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf, + int len, u16 id, u16 offset); + int (*read_pda)(struct hermes *hw, __le16 *pda, + u32 pda_addr, u16 pda_len); + int (*program_init)(struct hermes *hw, u32 entry_point); + int (*program_end)(struct hermes *hw); + int (*program)(struct hermes *hw, const char *buf, + u32 addr, u32 len); + void (*lock_irqsave)(spinlock_t *lock, unsigned long *flags); + void (*unlock_irqrestore)(spinlock_t *lock, unsigned long *flags); + void (*lock_irq)(spinlock_t *lock); + void (*unlock_irq)(spinlock_t *lock); +}; + +/* Basic control structure */ +struct hermes { + void __iomem *iobase; + int reg_spacing; +#define HERMES_16BIT_REGSPACING 0 +#define HERMES_32BIT_REGSPACING 1 + u16 inten; /* Which interrupts should be enabled? */ + bool eeprom_pda; + const struct hermes_ops *ops; + void *priv; +}; + +/* Register access convenience macros */ +#define hermes_read_reg(hw, off) \ + (ioread16((hw)->iobase + ((off) << (hw)->reg_spacing))) +#define hermes_write_reg(hw, off, val) \ + (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing))) +#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name) +#define hermes_write_regn(hw, name, val) \ + hermes_write_reg((hw), HERMES_##name, (val)) + +/* Function prototypes */ +void hermes_struct_init(struct hermes *hw, void __iomem *address, + int reg_spacing); + +/* Inline functions */ + +static inline int hermes_present(struct hermes *hw) +{ + return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC; +} + +static inline void hermes_set_irqmask(struct hermes *hw, u16 events) +{ + hw->inten = events; + hermes_write_regn(hw, INTEN, events); +} + +static inline int hermes_enable_port(struct hermes *hw, int port) +{ + return hw->ops->cmd_wait(hw, HERMES_CMD_ENABLE | (port << 8), + 0, NULL); +} + +static inline int hermes_disable_port(struct hermes *hw, int port) +{ + return hw->ops->cmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), + 0, NULL); +} + +/* Initiate an INQUIRE command (tallies or scan). The result will come as an + * information frame in __orinoco_ev_info() */ +static inline int hermes_inquire(struct hermes *hw, u16 rid) +{ + return hw->ops->cmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL); +} + +#define HERMES_BYTES_TO_RECLEN(n) ((((n) + 1) / 2) + 1) +#define HERMES_RECLEN_TO_BYTES(n) (((n) - 1) * 2) + +/* Note that for the next two, the count is in 16-bit words, not bytes */ +static inline void hermes_read_words(struct hermes *hw, int off, + void *buf, unsigned count) +{ + off = off << hw->reg_spacing; + ioread16_rep(hw->iobase + off, buf, count); +} + +static inline void hermes_write_bytes(struct hermes *hw, int off, + const char *buf, unsigned count) +{ + off = off << hw->reg_spacing; + iowrite16_rep(hw->iobase + off, buf, count >> 1); + if (unlikely(count & 1)) + iowrite8(buf[count - 1], hw->iobase + off); +} + +static inline void hermes_clear_words(struct hermes *hw, int off, + unsigned count) +{ + unsigned i; + + off = off << hw->reg_spacing; + + for (i = 0; i < count; i++) + iowrite16(0, hw->iobase + off); +} + +#define HERMES_READ_RECORD(hw, bap, rid, buf) \ + (hw->ops->read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf))) +#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \ + (hw->ops->write_ltv((hw), (bap), (rid), \ + HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf))) + +static inline int hermes_read_wordrec(struct hermes *hw, int bap, u16 rid, + u16 *word) +{ + __le16 rec; + int err; + + err = HERMES_READ_RECORD(hw, bap, rid, &rec); + *word = le16_to_cpu(rec); + return err; +} + +static inline int hermes_write_wordrec(struct hermes *hw, int bap, u16 rid, + u16 word) +{ + __le16 rec = cpu_to_le16(word); + return HERMES_WRITE_RECORD(hw, bap, rid, &rec); +} + +#endif /* _HERMES_H */ diff --git a/drivers/net/wireless/intersil/orinoco/hermes_dld.c b/drivers/net/wireless/intersil/orinoco/hermes_dld.c new file mode 100644 index 000000000..4a10b7aca --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/hermes_dld.c @@ -0,0 +1,477 @@ +/* + * Hermes download helper. + * + * This helper: + * - is capable of writing to the volatile area of the hermes device + * - is currently not capable of writing to non-volatile areas + * - provide helpers to identify and update plugin data + * - is not capable of interpreting a fw image directly. That is up to + * the main card driver. + * - deals with Hermes I devices. It can probably be modified to deal + * with Hermes II devices + * + * Copyright (C) 2007, David Kilroy + * + * Plug data code slightly modified from spectrum_cs driver + * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org> + * Portions based on information in wl_lkm_718 Agere driver + * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include "hermes.h" +#include "hermes_dld.h" + +#define PFX "hermes_dld: " + +/* End markers used in dblocks */ +#define PDI_END 0x00000000 /* End of PDA */ +#define BLOCK_END 0xFFFFFFFF /* Last image block */ +#define TEXT_END 0x1A /* End of text header */ + +/* + * The following structures have little-endian fields denoted by + * the leading underscore. Don't access them directly - use inline + * functions defined below. + */ + +/* + * The binary image to be downloaded consists of series of data blocks. + * Each block has the following structure. + */ +struct dblock { + __le32 addr; /* adapter address where to write the block */ + __le16 len; /* length of the data only, in bytes */ + char data[0]; /* data to be written */ +} __packed; + +/* + * Plug Data References are located in the image after the last data + * block. They refer to areas in the adapter memory where the plug data + * items with matching ID should be written. + */ +struct pdr { + __le32 id; /* record ID */ + __le32 addr; /* adapter address where to write the data */ + __le32 len; /* expected length of the data, in bytes */ + char next[0]; /* next PDR starts here */ +} __packed; + +/* + * Plug Data Items are located in the EEPROM read from the adapter by + * primary firmware. They refer to the device-specific data that should + * be plugged into the secondary firmware. + */ +struct pdi { + __le16 len; /* length of ID and data, in words */ + __le16 id; /* record ID */ + char data[0]; /* plug data */ +} __packed; + +/*** FW data block access functions ***/ + +static inline u32 +dblock_addr(const struct dblock *blk) +{ + return le32_to_cpu(blk->addr); +} + +static inline u32 +dblock_len(const struct dblock *blk) +{ + return le16_to_cpu(blk->len); +} + +/*** PDR Access functions ***/ + +static inline u32 +pdr_id(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->id); +} + +static inline u32 +pdr_addr(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->addr); +} + +static inline u32 +pdr_len(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->len); +} + +/*** PDI Access functions ***/ + +static inline u32 +pdi_id(const struct pdi *pdi) +{ + return le16_to_cpu(pdi->id); +} + +/* Return length of the data only, in bytes */ +static inline u32 +pdi_len(const struct pdi *pdi) +{ + return 2 * (le16_to_cpu(pdi->len) - 1); +} + +/*** Plug Data Functions ***/ + +/* + * Scan PDR for the record with the specified RECORD_ID. + * If it's not found, return NULL. + */ +static const struct pdr * +hermes_find_pdr(const struct pdr *first_pdr, u32 record_id, const void *end) +{ + const struct pdr *pdr = first_pdr; + + end -= sizeof(struct pdr); + + while (((void *) pdr <= end) && + (pdr_id(pdr) != PDI_END)) { + /* + * PDR area is currently not terminated by PDI_END. + * It's followed by CRC records, which have the type + * field where PDR has length. The type can be 0 or 1. + */ + if (pdr_len(pdr) < 2) + return NULL; + + /* If the record ID matches, we are done */ + if (pdr_id(pdr) == record_id) + return pdr; + + pdr = (struct pdr *) pdr->next; + } + return NULL; +} + +/* Scan production data items for a particular entry */ +static const struct pdi * +hermes_find_pdi(const struct pdi *first_pdi, u32 record_id, const void *end) +{ + const struct pdi *pdi = first_pdi; + + end -= sizeof(struct pdi); + + while (((void *) pdi <= end) && + (pdi_id(pdi) != PDI_END)) { + + /* If the record ID matches, we are done */ + if (pdi_id(pdi) == record_id) + return pdi; + + pdi = (struct pdi *) &pdi->data[pdi_len(pdi)]; + } + return NULL; +} + +/* Process one Plug Data Item - find corresponding PDR and plug it */ +static int +hermes_plug_pdi(struct hermes *hw, const struct pdr *first_pdr, + const struct pdi *pdi, const void *pdr_end) +{ + const struct pdr *pdr; + + /* Find the PDR corresponding to this PDI */ + pdr = hermes_find_pdr(first_pdr, pdi_id(pdi), pdr_end); + + /* No match is found, safe to ignore */ + if (!pdr) + return 0; + + /* Lengths of the data in PDI and PDR must match */ + if (pdi_len(pdi) != pdr_len(pdr)) + return -EINVAL; + + /* do the actual plugging */ + hw->ops->program(hw, pdi->data, pdr_addr(pdr), pdi_len(pdi)); + + return 0; +} + +/* Parse PDA and write the records into the adapter + * + * Attempt to write every records that is in the specified pda + * which also has a valid production data record for the firmware. + */ +int hermes_apply_pda(struct hermes *hw, + const char *first_pdr, + const void *pdr_end, + const __le16 *pda, + const void *pda_end) +{ + int ret; + const struct pdi *pdi; + const struct pdr *pdr; + + pdr = (const struct pdr *) first_pdr; + pda_end -= sizeof(struct pdi); + + /* Go through every PDI and plug them into the adapter */ + pdi = (const struct pdi *) (pda + 2); + while (((void *) pdi <= pda_end) && + (pdi_id(pdi) != PDI_END)) { + ret = hermes_plug_pdi(hw, pdr, pdi, pdr_end); + if (ret) + return ret; + + /* Increment to the next PDI */ + pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)]; + } + return 0; +} + +/* Identify the total number of bytes in all blocks + * including the header data. + */ +size_t +hermes_blocks_length(const char *first_block, const void *end) +{ + const struct dblock *blk = (const struct dblock *) first_block; + int total_len = 0; + int len; + + end -= sizeof(*blk); + + /* Skip all blocks to locate Plug Data References + * (Spectrum CS) */ + while (((void *) blk <= end) && + (dblock_addr(blk) != BLOCK_END)) { + len = dblock_len(blk); + total_len += sizeof(*blk) + len; + blk = (struct dblock *) &blk->data[len]; + } + + return total_len; +} + +/*** Hermes programming ***/ + +/* Program the data blocks */ +int hermes_program(struct hermes *hw, const char *first_block, const void *end) +{ + const struct dblock *blk; + u32 blkaddr; + u32 blklen; + int err = 0; + + blk = (const struct dblock *) first_block; + + if ((void *) blk > (end - sizeof(*blk))) + return -EIO; + + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + + while ((blkaddr != BLOCK_END) && + (((void *) blk + blklen) <= end)) { + pr_debug(PFX "Programming block of length %d " + "to address 0x%08x\n", blklen, blkaddr); + + err = hw->ops->program(hw, blk->data, blkaddr, blklen); + if (err) + break; + + blk = (const struct dblock *) &blk->data[blklen]; + + if ((void *) blk > (end - sizeof(*blk))) + return -EIO; + + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + } + return err; +} + +/*** Default plugging data for Hermes I ***/ +/* Values from wl_lkm_718/hcf/dhf.c */ + +#define DEFINE_DEFAULT_PDR(pid, length, data) \ +static const struct { \ + __le16 len; \ + __le16 id; \ + u8 val[length]; \ +} __packed default_pdr_data_##pid = { \ + cpu_to_le16((sizeof(default_pdr_data_##pid)/ \ + sizeof(__le16)) - 1), \ + cpu_to_le16(pid), \ + data \ +} + +#define DEFAULT_PDR(pid) default_pdr_data_##pid + +/* HWIF Compatibility */ +DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00"); + +/* PPPPSign */ +DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00"); + +/* PPPPProf */ +DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00"); + +/* Antenna diversity */ +DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F"); + +/* Modem VCO band Set-up */ +DEFINE_DEFAULT_PDR(0x0160, 28, + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00"); + +/* Modem Rx Gain Table Values */ +DEFINE_DEFAULT_PDR(0x0161, 256, + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3E\01\x3E\x01\x3D\x01" + "\x3D\x01\x3C\01\x3C\x01\x3B\x01" + "\x3B\x01\x3A\01\x3A\x01\x39\x01" + "\x39\x01\x38\01\x38\x01\x37\x01" + "\x37\x01\x36\01\x36\x01\x35\x01" + "\x35\x01\x34\01\x34\x01\x33\x01" + "\x33\x01\x32\x01\x32\x01\x31\x01" + "\x31\x01\x30\x01\x30\x01\x7B\x01" + "\x7B\x01\x7A\x01\x7A\x01\x79\x01" + "\x79\x01\x78\x01\x78\x01\x77\x01" + "\x77\x01\x76\x01\x76\x01\x75\x01" + "\x75\x01\x74\x01\x74\x01\x73\x01" + "\x73\x01\x72\x01\x72\x01\x71\x01" + "\x71\x01\x70\x01\x70\x01\x68\x01" + "\x68\x01\x67\x01\x67\x01\x66\x01" + "\x66\x01\x65\x01\x65\x01\x57\x01" + "\x57\x01\x56\x01\x56\x01\x55\x01" + "\x55\x01\x54\x01\x54\x01\x53\x01" + "\x53\x01\x52\x01\x52\x01\x51\x01" + "\x51\x01\x50\x01\x50\x01\x48\x01" + "\x48\x01\x47\x01\x47\x01\x46\x01" + "\x46\x01\x45\x01\x45\x01\x44\x01" + "\x44\x01\x43\x01\x43\x01\x42\x01" + "\x42\x01\x41\x01\x41\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01"); + +/* Write PDA according to certain rules. + * + * For every production data record, look for a previous setting in + * the pda, and use that. + * + * For certain records, use defaults if they are not found in pda. + */ +int hermes_apply_pda_with_defaults(struct hermes *hw, + const char *first_pdr, + const void *pdr_end, + const __le16 *pda, + const void *pda_end) +{ + const struct pdr *pdr = (const struct pdr *) first_pdr; + const struct pdi *first_pdi = (const struct pdi *) &pda[2]; + const struct pdi *pdi; + const struct pdi *default_pdi = NULL; + const struct pdi *outdoor_pdi; + int record_id; + + pdr_end -= sizeof(struct pdr); + + while (((void *) pdr <= pdr_end) && + (pdr_id(pdr) != PDI_END)) { + /* + * For spectrum_cs firmwares, + * PDR area is currently not terminated by PDI_END. + * It's followed by CRC records, which have the type + * field where PDR has length. The type can be 0 or 1. + */ + if (pdr_len(pdr) < 2) + break; + record_id = pdr_id(pdr); + + pdi = hermes_find_pdi(first_pdi, record_id, pda_end); + if (pdi) + pr_debug(PFX "Found record 0x%04x at %p\n", + record_id, pdi); + + switch (record_id) { + case 0x110: /* Modem REFDAC values */ + case 0x120: /* Modem VGDAC values */ + outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1, + pda_end); + default_pdi = NULL; + if (outdoor_pdi) { + pdi = outdoor_pdi; + pr_debug(PFX + "Using outdoor record 0x%04x at %p\n", + record_id + 1, pdi); + } + break; + case 0x5: /* HWIF Compatibility */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005); + break; + case 0x108: /* PPPPSign */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108); + break; + case 0x109: /* PPPPProf */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109); + break; + case 0x150: /* Antenna diversity */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150); + break; + case 0x160: /* Modem VCO band Set-up */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160); + break; + case 0x161: /* Modem Rx Gain Table Values */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161); + break; + default: + default_pdi = NULL; + break; + } + if (!pdi && default_pdi) { + /* Use default */ + pdi = default_pdi; + pr_debug(PFX "Using default record 0x%04x at %p\n", + record_id, pdi); + } + + if (pdi) { + /* Lengths of the data in PDI and PDR must match */ + if ((pdi_len(pdi) == pdr_len(pdr)) && + ((void *) pdi->data + pdi_len(pdi) < pda_end)) { + /* do the actual plugging */ + hw->ops->program(hw, pdi->data, pdr_addr(pdr), + pdi_len(pdi)); + } + } + + pdr++; + } + return 0; +} diff --git a/drivers/net/wireless/intersil/orinoco/hermes_dld.h b/drivers/net/wireless/intersil/orinoco/hermes_dld.h new file mode 100644 index 000000000..b5377e232 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/hermes_dld.h @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2007, David Kilroy + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ +#ifndef _HERMES_DLD_H +#define _HERMES_DLD_H + +#include "hermes.h" + +int hermesi_program_init(struct hermes *hw, u32 offset); +int hermesi_program_end(struct hermes *hw); +int hermes_program(struct hermes *hw, const char *first_block, const void *end); + +int hermes_read_pda(struct hermes *hw, + __le16 *pda, + u32 pda_addr, + u16 pda_len, + int use_eeprom); +int hermes_apply_pda(struct hermes *hw, + const char *first_pdr, + const void *pdr_end, + const __le16 *pda, + const void *pda_end); +int hermes_apply_pda_with_defaults(struct hermes *hw, + const char *first_pdr, + const void *pdr_end, + const __le16 *pda, + const void *pda_end); + +size_t hermes_blocks_length(const char *first_block, const void *end); + +#endif /* _HERMES_DLD_H */ diff --git a/drivers/net/wireless/intersil/orinoco/hermes_rid.h b/drivers/net/wireless/intersil/orinoco/hermes_rid.h new file mode 100644 index 000000000..42eb67dea --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/hermes_rid.h @@ -0,0 +1,165 @@ +#ifndef _HERMES_RID_H +#define _HERMES_RID_H + +/* + * Configuration RIDs + */ +#define HERMES_RID_CNFPORTTYPE 0xFC00 +#define HERMES_RID_CNFOWNMACADDR 0xFC01 +#define HERMES_RID_CNFDESIREDSSID 0xFC02 +#define HERMES_RID_CNFOWNCHANNEL 0xFC03 +#define HERMES_RID_CNFOWNSSID 0xFC04 +#define HERMES_RID_CNFOWNATIMWINDOW 0xFC05 +#define HERMES_RID_CNFSYSTEMSCALE 0xFC06 +#define HERMES_RID_CNFMAXDATALEN 0xFC07 +#define HERMES_RID_CNFWDSADDRESS 0xFC08 +#define HERMES_RID_CNFPMENABLED 0xFC09 +#define HERMES_RID_CNFPMEPS 0xFC0A +#define HERMES_RID_CNFMULTICASTRECEIVE 0xFC0B +#define HERMES_RID_CNFMAXSLEEPDURATION 0xFC0C +#define HERMES_RID_CNFPMHOLDOVERDURATION 0xFC0D +#define HERMES_RID_CNFOWNNAME 0xFC0E +#define HERMES_RID_CNFOWNDTIMPERIOD 0xFC10 +#define HERMES_RID_CNFWDSADDRESS1 0xFC11 +#define HERMES_RID_CNFWDSADDRESS2 0xFC12 +#define HERMES_RID_CNFWDSADDRESS3 0xFC13 +#define HERMES_RID_CNFWDSADDRESS4 0xFC14 +#define HERMES_RID_CNFWDSADDRESS5 0xFC15 +#define HERMES_RID_CNFWDSADDRESS6 0xFC16 +#define HERMES_RID_CNFMULTICASTPMBUFFERING 0xFC17 +#define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20 +#define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21 +#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21 +#define HERMES_RID_CNFDROPUNENCRYPTED 0xFC22 +#define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23 +#define HERMES_RID_CNFDEFAULTKEY0 0xFC24 +#define HERMES_RID_CNFDEFAULTKEY1 0xFC25 +#define HERMES_RID_CNFMWOROBUST_AGERE 0xFC25 +#define HERMES_RID_CNFDEFAULTKEY2 0xFC26 +#define HERMES_RID_CNFDEFAULTKEY3 0xFC27 +#define HERMES_RID_CNFWEPFLAGS_INTERSIL 0xFC28 +#define HERMES_RID_CNFWEPKEYMAPPINGTABLE 0xFC29 +#define HERMES_RID_CNFAUTHENTICATION 0xFC2A +#define HERMES_RID_CNFMAXASSOCSTA 0xFC2B +#define HERMES_RID_CNFKEYLENGTH_SYMBOL 0xFC2B +#define HERMES_RID_CNFTXCONTROL 0xFC2C +#define HERMES_RID_CNFROAMINGMODE 0xFC2D +#define HERMES_RID_CNFHOSTAUTHENTICATION 0xFC2E +#define HERMES_RID_CNFRCVCRCERROR 0xFC30 +#define HERMES_RID_CNFMMLIFE 0xFC31 +#define HERMES_RID_CNFALTRETRYCOUNT 0xFC32 +#define HERMES_RID_CNFBEACONINT 0xFC33 +#define HERMES_RID_CNFAPPCFINFO 0xFC34 +#define HERMES_RID_CNFSTAPCFINFO 0xFC35 +#define HERMES_RID_CNFPRIORITYQUSAGE 0xFC37 +#define HERMES_RID_CNFTIMCTRL 0xFC40 +#define HERMES_RID_CNFTHIRTY2TALLY 0xFC42 +#define HERMES_RID_CNFENHSECURITY 0xFC43 +#define HERMES_RID_CNFGROUPADDRESSES 0xFC80 +#define HERMES_RID_CNFCREATEIBSS 0xFC81 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD 0xFC82 +#define HERMES_RID_CNFRTSTHRESHOLD 0xFC83 +#define HERMES_RID_CNFTXRATECONTROL 0xFC84 +#define HERMES_RID_CNFPROMISCUOUSMODE 0xFC85 +#define HERMES_RID_CNFBASICRATES_SYMBOL 0xFC8A +#define HERMES_RID_CNFPREAMBLE_SYMBOL 0xFC8C +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD0 0xFC90 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD1 0xFC91 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD2 0xFC92 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD3 0xFC93 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD4 0xFC94 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD5 0xFC95 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD6 0xFC96 +#define HERMES_RID_CNFRTSTHRESHOLD0 0xFC97 +#define HERMES_RID_CNFRTSTHRESHOLD1 0xFC98 +#define HERMES_RID_CNFRTSTHRESHOLD2 0xFC99 +#define HERMES_RID_CNFRTSTHRESHOLD3 0xFC9A +#define HERMES_RID_CNFRTSTHRESHOLD4 0xFC9B +#define HERMES_RID_CNFRTSTHRESHOLD5 0xFC9C +#define HERMES_RID_CNFRTSTHRESHOLD6 0xFC9D +#define HERMES_RID_CNFHOSTSCAN_SYMBOL 0xFCAB +#define HERMES_RID_CNFSHORTPREAMBLE 0xFCB0 +#define HERMES_RID_CNFWEPKEYS_AGERE 0xFCB0 +#define HERMES_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1 +#define HERMES_RID_CNFTXKEY_AGERE 0xFCB1 +#define HERMES_RID_CNFAUTHENTICATIONRSPTO 0xFCB2 +#define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2 +#define HERMES_RID_CNFBASICRATES 0xFCB3 +#define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4 +#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE 0xFCB4 +#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE 0xFCB5 +#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE 0xFCB6 +#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE 0xFCB7 +#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE 0xFCB8 +#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE 0xFCB9 +#define HERMES_RID_CNFCACHEDPMKADDRESS 0xFCBA +#define HERMES_RID_CNFREMOVEPMKADDRESS 0xFCBB +#define HERMES_RID_CNFSCANCHANNELS2GHZ 0xFCC2 +#define HERMES_RID_CNFDISASSOCIATE 0xFCC8 +#define HERMES_RID_CNFTICKTIME 0xFCE0 +#define HERMES_RID_CNFSCANREQUEST 0xFCE1 +#define HERMES_RID_CNFJOINREQUEST 0xFCE2 +#define HERMES_RID_CNFAUTHENTICATESTATION 0xFCE3 +#define HERMES_RID_CNFCHANNELINFOREQUEST 0xFCE4 +#define HERMES_RID_CNFHOSTSCAN 0xFCE5 + +/* + * Information RIDs + */ +#define HERMES_RID_MAXLOADTIME 0xFD00 +#define HERMES_RID_DOWNLOADBUFFER 0xFD01 +#define HERMES_RID_PRIID 0xFD02 +#define HERMES_RID_PRISUPRANGE 0xFD03 +#define HERMES_RID_CFIACTRANGES 0xFD04 +#define HERMES_RID_NICSERNUM 0xFD0A +#define HERMES_RID_NICID 0xFD0B +#define HERMES_RID_MFISUPRANGE 0xFD0C +#define HERMES_RID_CFISUPRANGE 0xFD0D +#define HERMES_RID_CHANNELLIST 0xFD10 +#define HERMES_RID_REGULATORYDOMAINS 0xFD11 +#define HERMES_RID_TEMPTYPE 0xFD12 +#define HERMES_RID_CIS 0xFD13 +#define HERMES_RID_STAID 0xFD20 +#define HERMES_RID_STASUPRANGE 0xFD21 +#define HERMES_RID_MFIACTRANGES 0xFD22 +#define HERMES_RID_CFIACTRANGES2 0xFD23 +#define HERMES_RID_SECONDARYVERSION_SYMBOL 0xFD24 +#define HERMES_RID_PORTSTATUS 0xFD40 +#define HERMES_RID_CURRENTSSID 0xFD41 +#define HERMES_RID_CURRENTBSSID 0xFD42 +#define HERMES_RID_COMMSQUALITY 0xFD43 +#define HERMES_RID_CURRENTTXRATE 0xFD44 +#define HERMES_RID_CURRENTBEACONINTERVAL 0xFD45 +#define HERMES_RID_CURRENTSCALETHRESHOLDS 0xFD46 +#define HERMES_RID_PROTOCOLRSPTIME 0xFD47 +#define HERMES_RID_SHORTRETRYLIMIT 0xFD48 +#define HERMES_RID_LONGRETRYLIMIT 0xFD49 +#define HERMES_RID_MAXTRANSMITLIFETIME 0xFD4A +#define HERMES_RID_MAXRECEIVELIFETIME 0xFD4B +#define HERMES_RID_CFPOLLABLE 0xFD4C +#define HERMES_RID_AUTHENTICATIONALGORITHMS 0xFD4D +#define HERMES_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F +#define HERMES_RID_DBMCOMMSQUALITY_INTERSIL 0xFD51 +#define HERMES_RID_CURRENTTXRATE1 0xFD80 +#define HERMES_RID_CURRENTTXRATE2 0xFD81 +#define HERMES_RID_CURRENTTXRATE3 0xFD82 +#define HERMES_RID_CURRENTTXRATE4 0xFD83 +#define HERMES_RID_CURRENTTXRATE5 0xFD84 +#define HERMES_RID_CURRENTTXRATE6 0xFD85 +#define HERMES_RID_OWNMACADDR 0xFD86 +#define HERMES_RID_SCANRESULTSTABLE 0xFD88 +#define HERMES_RID_CURRENT_COUNTRY_INFO 0xFD89 +#define HERMES_RID_CURRENT_WPA_IE 0xFD8A +#define HERMES_RID_CURRENT_TKIP_IV 0xFD8B +#define HERMES_RID_CURRENT_ASSOC_REQ_INFO 0xFD8C +#define HERMES_RID_CURRENT_ASSOC_RESP_INFO 0xFD8D +#define HERMES_RID_TXQUEUEEMPTY 0xFD91 +#define HERMES_RID_PHYTYPE 0xFDC0 +#define HERMES_RID_CURRENTCHANNEL 0xFDC1 +#define HERMES_RID_CURRENTPOWERSTATE 0xFDC2 +#define HERMES_RID_CCAMODE 0xFDC3 +#define HERMES_RID_SUPPORTEDDATARATES 0xFDC6 +#define HERMES_RID_BUILDSEQ 0xFFFE +#define HERMES_RID_FWID 0xFFFF + +#endif diff --git a/drivers/net/wireless/intersil/orinoco/hw.c b/drivers/net/wireless/intersil/orinoco/hw.c new file mode 100644 index 000000000..e27e32851 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/hw.c @@ -0,0 +1,1356 @@ +/* Encapsulate basic setting changes and retrieval on Hermes hardware + * + * See copyright notice in main.c + */ +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/if_arp.h> +#include <linux/ieee80211.h> +#include <linux/wireless.h> +#include <net/cfg80211.h> +#include "hermes.h" +#include "hermes_rid.h" +#include "orinoco.h" + +#include "hw.h" + +#define SYMBOL_MAX_VER_LEN (14) + +/* Symbol firmware has a bug allocating buffers larger than this */ +#define TX_NICBUF_SIZE_BUG 1585 + +/********************************************************************/ +/* Data tables */ +/********************************************************************/ + +/* This tables gives the actual meanings of the bitrate IDs returned + * by the firmware. */ +static const struct { + int bitrate; /* in 100s of kilobits */ + int automatic; + u16 agere_txratectrl; + u16 intersil_txratectrl; +} bitrate_table[] = { + {110, 1, 3, 15}, /* Entry 0 is the default */ + {10, 0, 1, 1}, + {10, 1, 1, 1}, + {20, 0, 2, 2}, + {20, 1, 6, 3}, + {55, 0, 4, 4}, + {55, 1, 7, 7}, + {110, 0, 5, 8}, +}; +#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) + +/* Firmware version encoding */ +struct comp_id { + u16 id, variant, major, minor; +} __packed; + +static inline enum fwtype determine_firmware_type(struct comp_id *nic_id) +{ + if (nic_id->id < 0x8000) + return FIRMWARE_TYPE_AGERE; + else if (nic_id->id == 0x8000 && nic_id->major == 0) + return FIRMWARE_TYPE_SYMBOL; + else + return FIRMWARE_TYPE_INTERSIL; +} + +/* Set priv->firmware type, determine firmware properties + * This function can be called before we have registerred with netdev, + * so all errors go out with dev_* rather than printk + * + * If non-NULL stores a firmware description in fw_name. + * If non-NULL stores a HW version in hw_ver + * + * These are output via generic cfg80211 ethtool support. + */ +int determine_fw_capabilities(struct orinoco_private *priv, + char *fw_name, size_t fw_name_len, + u32 *hw_ver) +{ + struct device *dev = priv->dev; + struct hermes *hw = &priv->hw; + int err; + struct comp_id nic_id, sta_id; + unsigned int firmver; + char tmp[SYMBOL_MAX_VER_LEN + 1] __attribute__((aligned(2))); + + /* Get the hardware version */ + err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); + if (err) { + dev_err(dev, "Cannot read hardware identity: error %d\n", + err); + return err; + } + + le16_to_cpus(&nic_id.id); + le16_to_cpus(&nic_id.variant); + le16_to_cpus(&nic_id.major); + le16_to_cpus(&nic_id.minor); + dev_info(dev, "Hardware identity %04x:%04x:%04x:%04x\n", + nic_id.id, nic_id.variant, nic_id.major, nic_id.minor); + + if (hw_ver) + *hw_ver = (((nic_id.id & 0xff) << 24) | + ((nic_id.variant & 0xff) << 16) | + ((nic_id.major & 0xff) << 8) | + (nic_id.minor & 0xff)); + + priv->firmware_type = determine_firmware_type(&nic_id); + + /* Get the firmware version */ + err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); + if (err) { + dev_err(dev, "Cannot read station identity: error %d\n", + err); + return err; + } + + le16_to_cpus(&sta_id.id); + le16_to_cpus(&sta_id.variant); + le16_to_cpus(&sta_id.major); + le16_to_cpus(&sta_id.minor); + dev_info(dev, "Station identity %04x:%04x:%04x:%04x\n", + sta_id.id, sta_id.variant, sta_id.major, sta_id.minor); + + switch (sta_id.id) { + case 0x15: + dev_err(dev, "Primary firmware is active\n"); + return -ENODEV; + case 0x14b: + dev_err(dev, "Tertiary firmware is active\n"); + return -ENODEV; + case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ + case 0x21: /* Symbol Spectrum24 Trilogy */ + break; + default: + dev_notice(dev, "Unknown station ID, please report\n"); + break; + } + + /* Default capabilities */ + priv->has_sensitivity = 1; + priv->has_mwo = 0; + priv->has_preamble = 0; + priv->has_port3 = 1; + priv->has_ibss = 1; + priv->has_wep = 0; + priv->has_big_wep = 0; + priv->has_alt_txcntl = 0; + priv->has_ext_scan = 0; + priv->has_wpa = 0; + priv->do_fw_download = 0; + + /* Determine capabilities from the firmware version */ + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, + ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ + if (fw_name) + snprintf(fw_name, fw_name_len, "Lucent/Agere %d.%02d", + sta_id.major, sta_id.minor); + + firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; + + priv->has_ibss = (firmver >= 0x60006); + priv->has_wep = (firmver >= 0x40020); + priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell + Gold cards from the others? */ + priv->has_mwo = (firmver >= 0x60000); + priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ + priv->ibss_port = 1; + priv->has_hostscan = (firmver >= 0x8000a); + priv->do_fw_download = 1; + priv->broken_monitor = (firmver >= 0x80000); + priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */ + priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */ + priv->has_wpa = (firmver >= 0x9002a); + /* Tested with Agere firmware : + * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II + * Tested CableTron firmware : 4.32 => Anton */ + break; + case FIRMWARE_TYPE_SYMBOL: + /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ + /* Intel MAC : 00:02:B3:* */ + /* 3Com MAC : 00:50:DA:* */ + memset(tmp, 0, sizeof(tmp)); + /* Get the Symbol firmware version */ + err = hw->ops->read_ltv(hw, USER_BAP, + HERMES_RID_SECONDARYVERSION_SYMBOL, + SYMBOL_MAX_VER_LEN, NULL, &tmp); + if (err) { + dev_warn(dev, "Error %d reading Symbol firmware info. " + "Wildly guessing capabilities...\n", err); + firmver = 0; + tmp[0] = '\0'; + } else { + /* The firmware revision is a string, the format is + * something like : "V2.20-01". + * Quick and dirty parsing... - Jean II + */ + firmver = ((tmp[1] - '0') << 16) + | ((tmp[3] - '0') << 12) + | ((tmp[4] - '0') << 8) + | ((tmp[6] - '0') << 4) + | (tmp[7] - '0'); + + tmp[SYMBOL_MAX_VER_LEN] = '\0'; + } + + if (fw_name) + snprintf(fw_name, fw_name_len, "Symbol %s", tmp); + + priv->has_ibss = (firmver >= 0x20000); + priv->has_wep = (firmver >= 0x15012); + priv->has_big_wep = (firmver >= 0x20000); + priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || + (firmver >= 0x29000 && firmver < 0x30000) || + firmver >= 0x31000; + priv->has_preamble = (firmver >= 0x20000); + priv->ibss_port = 4; + + /* Symbol firmware is found on various cards, but + * there has been no attempt to check firmware + * download on non-spectrum_cs based cards. + * + * Given that the Agere firmware download works + * differently, we should avoid doing a firmware + * download with the Symbol algorithm on non-spectrum + * cards. + * + * For now we can identify a spectrum_cs based card + * because it has a firmware reset function. + */ + priv->do_fw_download = (priv->stop_fw != NULL); + + priv->broken_disableport = (firmver == 0x25013) || + (firmver >= 0x30000 && firmver <= 0x31000); + priv->has_hostscan = (firmver >= 0x31001) || + (firmver >= 0x29057 && firmver < 0x30000); + /* Tested with Intel firmware : 0x20015 => Jean II */ + /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ + break; + case FIRMWARE_TYPE_INTERSIL: + /* D-Link, Linksys, Adtron, ZoomAir, and many others... + * Samsung, Compaq 100/200 and Proxim are slightly + * different and less well tested */ + /* D-Link MAC : 00:40:05:* */ + /* Addtron MAC : 00:90:D1:* */ + if (fw_name) + snprintf(fw_name, fw_name_len, "Intersil %d.%d.%d", + sta_id.major, sta_id.minor, sta_id.variant); + + firmver = ((unsigned long)sta_id.major << 16) | + ((unsigned long)sta_id.minor << 8) | sta_id.variant; + + priv->has_ibss = (firmver >= 0x000700); /* FIXME */ + priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); + priv->has_pm = (firmver >= 0x000700); + priv->has_hostscan = (firmver >= 0x010301); + + if (firmver >= 0x000800) + priv->ibss_port = 0; + else { + dev_notice(dev, "Intersil firmware earlier than v0.8.x" + " - several features not supported\n"); + priv->ibss_port = 1; + } + break; + } + if (fw_name) + dev_info(dev, "Firmware determined as %s\n", fw_name); + +#ifndef CONFIG_HERMES_PRISM + if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { + dev_err(dev, "Support for Prism chipset is not enabled\n"); + return -ENODEV; + } +#endif + + return 0; +} + +/* Read settings from EEPROM into our private structure. + * MAC address gets dropped into callers buffer + * Can be called before netdev registration. + */ +int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr) +{ + struct device *dev = priv->dev; + struct hermes_idstring nickbuf; + struct hermes *hw = &priv->hw; + int len; + int err; + u16 reclen; + + /* Get the MAC address */ + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + ETH_ALEN, NULL, dev_addr); + if (err) { + dev_warn(dev, "Failed to read MAC address!\n"); + goto out; + } + + dev_dbg(dev, "MAC address %pM\n", dev_addr); + + /* Get the station name */ + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + sizeof(nickbuf), &reclen, &nickbuf); + if (err) { + dev_err(dev, "failed to read station name\n"); + goto out; + } + if (nickbuf.len) + len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); + else + len = min(IW_ESSID_MAX_SIZE, 2 * reclen); + memcpy(priv->nick, &nickbuf.val, len); + priv->nick[len] = '\0'; + + dev_dbg(dev, "Station name \"%s\"\n", priv->nick); + + /* Get allowed channels */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, + &priv->channel_mask); + if (err) { + dev_err(dev, "Failed to read channel list!\n"); + goto out; + } + + /* Get initial AP density */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, + &priv->ap_density); + if (err || priv->ap_density < 1 || priv->ap_density > 3) + priv->has_sensitivity = 0; + + /* Get initial RTS threshold */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, + &priv->rts_thresh); + if (err) { + dev_err(dev, "Failed to read RTS threshold!\n"); + goto out; + } + + /* Get initial fragmentation settings */ + if (priv->has_mwo) + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + &priv->mwo_robust); + else + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + &priv->frag_thresh); + if (err) { + dev_err(dev, "Failed to read fragmentation settings!\n"); + goto out; + } + + /* Power management setup */ + if (priv->has_pm) { + priv->pm_on = 0; + priv->pm_mcast = 1; + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, + &priv->pm_period); + if (err) { + dev_err(dev, "Failed to read power management " + "period!\n"); + goto out; + } + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, + &priv->pm_timeout); + if (err) { + dev_err(dev, "Failed to read power management " + "timeout!\n"); + goto out; + } + } + + /* Preamble setup */ + if (priv->has_preamble) { + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPREAMBLE_SYMBOL, + &priv->preamble); + if (err) { + dev_err(dev, "Failed to read preamble setup\n"); + goto out; + } + } + + /* Retry settings */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, + &priv->short_retry_limit); + if (err) { + dev_err(dev, "Failed to read short retry limit\n"); + goto out; + } + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, + &priv->long_retry_limit); + if (err) { + dev_err(dev, "Failed to read long retry limit\n"); + goto out; + } + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, + &priv->retry_lifetime); + if (err) { + dev_err(dev, "Failed to read max retry lifetime\n"); + goto out; + } + +out: + return err; +} + +/* Can be called before netdev registration */ +int orinoco_hw_allocate_fid(struct orinoco_private *priv) +{ + struct device *dev = priv->dev; + struct hermes *hw = &priv->hw; + int err; + + err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { + /* Try workaround for old Symbol firmware bug */ + priv->nicbuf_size = TX_NICBUF_SIZE_BUG; + err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid); + + dev_warn(dev, "Firmware ALLOC bug detected " + "(old Symbol firmware?). Work around %s\n", + err ? "failed!" : "ok."); + } + + return err; +} + +int orinoco_get_bitratemode(int bitrate, int automatic) +{ + int ratemode = -1; + int i; + + if ((bitrate != 10) && (bitrate != 20) && + (bitrate != 55) && (bitrate != 110)) + return ratemode; + + for (i = 0; i < BITRATE_TABLE_SIZE; i++) { + if ((bitrate_table[i].bitrate == bitrate) && + (bitrate_table[i].automatic == automatic)) { + ratemode = i; + break; + } + } + return ratemode; +} + +void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic) +{ + BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); + + *bitrate = bitrate_table[ratemode].bitrate * 100000; + *automatic = bitrate_table[ratemode].automatic; +} + +int orinoco_hw_program_rids(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct wireless_dev *wdev = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + struct hermes_idstring idbuf; + + /* Set the MAC address */ + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + HERMES_BYTES_TO_RECLEN(ETH_ALEN), + dev->dev_addr); + if (err) { + printk(KERN_ERR "%s: Error %d setting MAC address\n", + dev->name, err); + return err; + } + + /* Set up the link mode */ + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, + priv->port_type); + if (err) { + printk(KERN_ERR "%s: Error %d setting port type\n", + dev->name, err); + return err; + } + /* Set the channel/frequency */ + if (priv->channel != 0 && priv->iw_mode != NL80211_IFTYPE_STATION) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFOWNCHANNEL, + priv->channel); + if (err) { + printk(KERN_ERR "%s: Error %d setting channel %d\n", + dev->name, err, priv->channel); + return err; + } + } + + if (priv->has_ibss) { + u16 createibss; + + if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { + printk(KERN_WARNING "%s: This firmware requires an " + "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); + /* With wvlan_cs, in this case, we would crash. + * hopefully, this driver will behave better... + * Jean II */ + createibss = 0; + } else { + createibss = priv->createibss; + } + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFCREATEIBSS, + createibss); + if (err) { + printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", + dev->name, err); + return err; + } + } + + /* Set the desired BSSID */ + err = __orinoco_hw_set_wap(priv); + if (err) { + printk(KERN_ERR "%s: Error %d setting AP address\n", + dev->name, err); + return err; + } + + /* Set the desired ESSID */ + idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); + memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); + /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, + HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting OWNSSID\n", + dev->name, err); + return err; + } + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, + HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", + dev->name, err); + return err; + } + + /* Set the station name */ + idbuf.len = cpu_to_le16(strlen(priv->nick)); + memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + HERMES_BYTES_TO_RECLEN(strlen(priv->nick) + 2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting nickname\n", + dev->name, err); + return err; + } + + /* Set AP density */ + if (priv->has_sensitivity) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSYSTEMSCALE, + priv->ap_density); + if (err) { + printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " + "Disabling sensitivity control\n", + dev->name, err); + + priv->has_sensitivity = 0; + } + } + + /* Set RTS threshold */ + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, + priv->rts_thresh); + if (err) { + printk(KERN_ERR "%s: Error %d setting RTS threshold\n", + dev->name, err); + return err; + } + + /* Set fragmentation threshold or MWO robustness */ + if (priv->has_mwo) + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + priv->mwo_robust); + else + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + priv->frag_thresh); + if (err) { + printk(KERN_ERR "%s: Error %d setting fragmentation\n", + dev->name, err); + return err; + } + + /* Set bitrate */ + err = __orinoco_hw_set_bitrate(priv); + if (err) { + printk(KERN_ERR "%s: Error %d setting bitrate\n", + dev->name, err); + return err; + } + + /* Set power management */ + if (priv->has_pm) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMENABLED, + priv->pm_on); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMULTICASTRECEIVE, + priv->pm_mcast); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, + priv->pm_period); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, + priv->pm_timeout); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + } + + /* Set preamble - only for Symbol so far... */ + if (priv->has_preamble) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPREAMBLE_SYMBOL, + priv->preamble); + if (err) { + printk(KERN_ERR "%s: Error %d setting preamble\n", + dev->name, err); + return err; + } + } + + /* Set up encryption */ + if (priv->has_wep || priv->has_wpa) { + err = __orinoco_hw_setup_enc(priv); + if (err) { + printk(KERN_ERR "%s: Error %d activating encryption\n", + dev->name, err); + return err; + } + } + + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { + /* Enable monitor mode */ + dev->type = ARPHRD_IEEE80211; + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_MONITOR, 0, NULL); + } else { + /* Disable monitor mode */ + dev->type = ARPHRD_ETHER; + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_STOP, 0, NULL); + } + if (err) + return err; + + /* Reset promiscuity / multicast*/ + priv->promiscuous = 0; + priv->mc_count = 0; + + /* Record mode change */ + wdev->iftype = priv->iw_mode; + + return 0; +} + +/* Get tsc from the firmware */ +int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc) +{ + struct hermes *hw = &priv->hw; + int err = 0; + u8 tsc_arr[4][ORINOCO_SEQ_LEN]; + + if ((key < 0) || (key >= 4)) + return -EINVAL; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, + sizeof(tsc_arr), NULL, &tsc_arr); + if (!err) + memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); + + return err; +} + +int __orinoco_hw_set_bitrate(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + int ratemode = priv->bitratemode; + int err = 0; + + if (ratemode >= BITRATE_TABLE_SIZE) { + printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", + priv->ndev->name, ratemode); + return -EINVAL; + } + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXRATECONTROL, + bitrate_table[ratemode].agere_txratectrl); + break; + case FIRMWARE_TYPE_INTERSIL: + case FIRMWARE_TYPE_SYMBOL: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXRATECONTROL, + bitrate_table[ratemode].intersil_txratectrl); + break; + default: + BUG(); + } + + return err; +} + +int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate) +{ + struct hermes *hw = &priv->hw; + int i; + int err = 0; + u16 val; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CURRENTTXRATE, &val); + if (err) + return err; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ + /* Note : in Lucent firmware, the return value of + * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, + * and therefore is totally different from the + * encoding of HERMES_RID_CNFTXRATECONTROL. + * Don't forget that 6Mb/s is really 5.5Mb/s */ + if (val == 6) + *bitrate = 5500000; + else + *bitrate = val * 1000000; + break; + case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ + case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ + for (i = 0; i < BITRATE_TABLE_SIZE; i++) + if (bitrate_table[i].intersil_txratectrl == val) { + *bitrate = bitrate_table[i].bitrate * 100000; + break; + } + + if (i >= BITRATE_TABLE_SIZE) { + printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", + priv->ndev->name, val); + err = -EIO; + } + + break; + default: + BUG(); + } + + return err; +} + +/* Set fixed AP address */ +int __orinoco_hw_set_wap(struct orinoco_private *priv) +{ + int roaming_flag; + int err = 0; + struct hermes *hw = &priv->hw; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* not supported */ + break; + case FIRMWARE_TYPE_INTERSIL: + if (priv->bssid_fixed) + roaming_flag = 2; + else + roaming_flag = 1; + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFROAMINGMODE, + roaming_flag); + break; + case FIRMWARE_TYPE_SYMBOL: + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFMANDATORYBSSID_SYMBOL, + &priv->desired_bssid); + break; + } + return err; +} + +/* Change the WEP keys and/or the current keys. Can be called + * either from __orinoco_hw_setup_enc() or directly from + * orinoco_ioctl_setiwencode(). In the later case the association + * with the AP is not broken (if the firmware can handle it), + * which is needed for 802.1x implementations. */ +int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + int err = 0; + int i; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + { + struct orinoco_key keys[ORINOCO_MAX_KEYS]; + + memset(&keys, 0, sizeof(keys)); + for (i = 0; i < ORINOCO_MAX_KEYS; i++) { + int len = min(priv->keys[i].key_len, + ORINOCO_MAX_KEY_SIZE); + memcpy(&keys[i].data, priv->keys[i].key, len); + if (len > SMALL_KEY_SIZE) + keys[i].len = cpu_to_le16(LARGE_KEY_SIZE); + else if (len > 0) + keys[i].len = cpu_to_le16(SMALL_KEY_SIZE); + else + keys[i].len = cpu_to_le16(0); + } + + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFWEPKEYS_AGERE, + &keys); + if (err) + return err; + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXKEY_AGERE, + priv->tx_key); + if (err) + return err; + break; + } + case FIRMWARE_TYPE_INTERSIL: + case FIRMWARE_TYPE_SYMBOL: + { + int keylen; + + /* Force uniform key length to work around + * firmware bugs */ + keylen = priv->keys[priv->tx_key].key_len; + + if (keylen > LARGE_KEY_SIZE) { + printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", + priv->ndev->name, priv->tx_key, keylen); + return -E2BIG; + } else if (keylen > SMALL_KEY_SIZE) + keylen = LARGE_KEY_SIZE; + else if (keylen > 0) + keylen = SMALL_KEY_SIZE; + else + keylen = 0; + + /* Write all 4 keys */ + for (i = 0; i < ORINOCO_MAX_KEYS; i++) { + u8 key[LARGE_KEY_SIZE] = { 0 }; + + memcpy(key, priv->keys[i].key, + priv->keys[i].key_len); + + err = hw->ops->write_ltv(hw, USER_BAP, + HERMES_RID_CNFDEFAULTKEY0 + i, + HERMES_BYTES_TO_RECLEN(keylen), + key); + if (err) + return err; + } + + /* Write the index of the key used in transmission */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPDEFAULTKEYID, + priv->tx_key); + if (err) + return err; + } + break; + } + + return 0; +} + +int __orinoco_hw_setup_enc(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + int err = 0; + int master_wep_flag; + int auth_flag; + int enc_flag; + + /* Setup WEP keys */ + if (priv->encode_alg == ORINOCO_ALG_WEP) + __orinoco_hw_setup_wepkeys(priv); + + if (priv->wep_restrict) + auth_flag = HERMES_AUTH_SHARED_KEY; + else + auth_flag = HERMES_AUTH_OPEN; + + if (priv->wpa_enabled) + enc_flag = 2; + else if (priv->encode_alg == ORINOCO_ALG_WEP) + enc_flag = 1; + else + enc_flag = 0; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ + if (priv->encode_alg == ORINOCO_ALG_WEP) { + /* Enable the shared-key authentication. */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFAUTHENTICATION_AGERE, + auth_flag); + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPENABLED_AGERE, + enc_flag); + if (err) + return err; + + if (priv->has_wpa) { + /* Set WPA key management */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE, + priv->key_mgmt); + if (err) + return err; + } + + break; + + case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ + case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ + if (priv->encode_alg == ORINOCO_ALG_WEP) { + if (priv->wep_restrict || + (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) + master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | + HERMES_WEP_EXCL_UNENCRYPTED; + else + master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFAUTHENTICATION, + auth_flag); + if (err) + return err; + } else + master_wep_flag = 0; + + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) + master_wep_flag |= HERMES_WEP_HOST_DECRYPT; + + /* Master WEP setting : on/off */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPFLAGS_INTERSIL, + master_wep_flag); + if (err) + return err; + + break; + } + + return 0; +} + +/* key must be 32 bytes, including the tx and rx MIC keys. + * rsc must be NULL or up to 8 bytes + * tsc must be NULL or up to 8 bytes + */ +int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx, + int set_tx, const u8 *key, const u8 *rsc, + size_t rsc_len, const u8 *tsc, size_t tsc_len) +{ + struct { + __le16 idx; + u8 rsc[ORINOCO_SEQ_LEN]; + u8 key[TKIP_KEYLEN]; + u8 tx_mic[MIC_KEYLEN]; + u8 rx_mic[MIC_KEYLEN]; + u8 tsc[ORINOCO_SEQ_LEN]; + } __packed buf; + struct hermes *hw = &priv->hw; + int ret; + int err; + int k; + u16 xmitting; + + key_idx &= 0x3; + + if (set_tx) + key_idx |= 0x8000; + + buf.idx = cpu_to_le16(key_idx); + memcpy(buf.key, key, + sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic)); + + if (rsc_len > sizeof(buf.rsc)) + rsc_len = sizeof(buf.rsc); + + if (tsc_len > sizeof(buf.tsc)) + tsc_len = sizeof(buf.tsc); + + memset(buf.rsc, 0, sizeof(buf.rsc)); + memset(buf.tsc, 0, sizeof(buf.tsc)); + + if (rsc != NULL) + memcpy(buf.rsc, rsc, rsc_len); + + if (tsc != NULL) + memcpy(buf.tsc, tsc, tsc_len); + else + buf.tsc[4] = 0x10; + + /* Wait up to 100ms for tx queue to empty */ + for (k = 100; k > 0; k--) { + udelay(1000); + ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, + &xmitting); + if (ret || !xmitting) + break; + } + + if (k == 0) + ret = -ETIMEDOUT; + + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE, + &buf); + + return ret ? ret : err; +} + +int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx) +{ + struct hermes *hw = &priv->hw; + int err; + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE, + key_idx); + if (err) + printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", + priv->ndev->name, err, key_idx); + return err; +} + +int __orinoco_hw_set_multicast_list(struct orinoco_private *priv, + struct net_device *dev, + int mc_count, int promisc) +{ + struct hermes *hw = &priv->hw; + int err = 0; + + if (promisc != priv->promiscuous) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPROMISCUOUSMODE, + promisc); + if (err) { + printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", + priv->ndev->name, err); + } else + priv->promiscuous = promisc; + } + + /* If we're not in promiscuous mode, then we need to set the + * group address if either we want to multicast, or if we were + * multicasting and want to stop */ + if (!promisc && (mc_count || priv->mc_count)) { + struct netdev_hw_addr *ha; + struct hermes_multicast mclist; + int i = 0; + + netdev_for_each_mc_addr(ha, dev) { + if (i == mc_count) + break; + memcpy(mclist.addr[i++], ha->addr, ETH_ALEN); + } + + err = hw->ops->write_ltv(hw, USER_BAP, + HERMES_RID_CNFGROUPADDRESSES, + HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), + &mclist); + if (err) + printk(KERN_ERR "%s: Error %d setting multicast list.\n", + priv->ndev->name, err); + else + priv->mc_count = mc_count; + } + return err; +} + +/* Return : < 0 -> error code ; >= 0 -> length */ +int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, + char buf[IW_ESSID_MAX_SIZE + 1]) +{ + struct hermes *hw = &priv->hw; + int err = 0; + struct hermes_idstring essidbuf; + char *p = (char *)(&essidbuf.val); + int len; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (strlen(priv->desired_essid) > 0) { + /* We read the desired SSID from the hardware rather + than from priv->desired_essid, just in case the + firmware is allowed to change it on us. I'm not + sure about this */ + /* My guess is that the OWNSSID should always be whatever + * we set to the card, whereas CURRENT_SSID is the one that + * may change... - Jean II */ + u16 rid; + + *active = 1; + + rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : + HERMES_RID_CNFDESIREDSSID; + + err = hw->ops->read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), + NULL, &essidbuf); + if (err) + goto fail_unlock; + } else { + *active = 0; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, + sizeof(essidbuf), NULL, &essidbuf); + if (err) + goto fail_unlock; + } + + len = le16_to_cpu(essidbuf.len); + BUG_ON(len > IW_ESSID_MAX_SIZE); + + memset(buf, 0, IW_ESSID_MAX_SIZE); + memcpy(buf, p, len); + err = len; + + fail_unlock: + orinoco_unlock(priv, &flags); + + return err; +} + +int orinoco_hw_get_freq(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + int err = 0; + u16 channel; + int freq = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, + &channel); + if (err) + goto out; + + /* Intersil firmware 1.3.5 returns 0 when the interface is down */ + if (channel == 0) { + err = -EBUSY; + goto out; + } + + if ((channel < 1) || (channel > NUM_CHANNELS)) { + printk(KERN_WARNING "%s: Channel out of range (%d)!\n", + priv->ndev->name, channel); + err = -EBUSY; + goto out; + + } + freq = ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); + + out: + orinoco_unlock(priv, &flags); + + if (err > 0) + err = -EBUSY; + return err ? err : freq; +} + +int orinoco_hw_get_bitratelist(struct orinoco_private *priv, + int *numrates, s32 *rates, int max) +{ + struct hermes *hw = &priv->hw; + struct hermes_idstring list; + unsigned char *p = (unsigned char *)&list.val; + int err = 0; + int num; + int i; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, + sizeof(list), NULL, &list); + orinoco_unlock(priv, &flags); + + if (err) + return err; + + num = le16_to_cpu(list.len); + *numrates = num; + num = min(num, max); + + for (i = 0; i < num; i++) + rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ + + return 0; +} + +int orinoco_hw_trigger_scan(struct orinoco_private *priv, + const struct cfg80211_ssid *ssid) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + unsigned long flags; + int err = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Scanning with port 0 disabled would fail */ + if (!netif_running(dev)) { + err = -ENETDOWN; + goto out; + } + + /* In monitor mode, the scan results are always empty. + * Probe responses are passed to the driver as received + * frames and could be processed in software. */ + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { + err = -EOPNOTSUPP; + goto out; + } + + if (priv->has_hostscan) { + switch (priv->firmware_type) { + case FIRMWARE_TYPE_SYMBOL: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFHOSTSCAN_SYMBOL, + HERMES_HOSTSCAN_SYMBOL_ONCE | + HERMES_HOSTSCAN_SYMBOL_BCAST); + break; + case FIRMWARE_TYPE_INTERSIL: { + __le16 req[3]; + + req[0] = cpu_to_le16(0x3fff); /* All channels */ + req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ + req[2] = 0; /* Any ESSID */ + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFHOSTSCAN, &req); + break; + } + case FIRMWARE_TYPE_AGERE: + if (ssid->ssid_len > 0) { + struct hermes_idstring idbuf; + size_t len = ssid->ssid_len; + + idbuf.len = cpu_to_le16(len); + memcpy(idbuf.val, ssid->ssid, len); + + err = hw->ops->write_ltv(hw, USER_BAP, + HERMES_RID_CNFSCANSSID_AGERE, + HERMES_BYTES_TO_RECLEN(len + 2), + &idbuf); + } else + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSCANSSID_AGERE, + 0); /* Any ESSID */ + if (err) + break; + + if (priv->has_ext_scan) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSCANCHANNELS2GHZ, + 0x7FFF); + if (err) + goto out; + + err = hermes_inquire(hw, + HERMES_INQ_CHANNELINFO); + } else + err = hermes_inquire(hw, HERMES_INQ_SCAN); + + break; + } + } else + err = hermes_inquire(hw, HERMES_INQ_SCAN); + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +/* Disassociate from node with BSSID addr */ +int orinoco_hw_disassociate(struct orinoco_private *priv, + u8 *addr, u16 reason_code) +{ + struct hermes *hw = &priv->hw; + int err; + + struct { + u8 addr[ETH_ALEN]; + __le16 reason_code; + } __packed buf; + + /* Currently only supported by WPA enabled Agere fw */ + if (!priv->has_wpa) + return -EOPNOTSUPP; + + memcpy(buf.addr, addr, ETH_ALEN); + buf.reason_code = cpu_to_le16(reason_code); + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFDISASSOCIATE, + &buf); + return err; +} + +int orinoco_hw_get_current_bssid(struct orinoco_private *priv, + u8 *addr) +{ + struct hermes *hw = &priv->hw; + int err; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, addr); + + return err; +} diff --git a/drivers/net/wireless/intersil/orinoco/hw.h b/drivers/net/wireless/intersil/orinoco/hw.h new file mode 100644 index 000000000..466d1ede7 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/hw.h @@ -0,0 +1,59 @@ +/* Encapsulate basic setting changes on Hermes hardware + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_HW_H_ +#define _ORINOCO_HW_H_ + +#include <linux/types.h> +#include <linux/wireless.h> +#include <net/cfg80211.h> + +/* Hardware BAPs */ +#define USER_BAP 0 +#define IRQ_BAP 1 + +/* WEP key sizes */ +#define SMALL_KEY_SIZE 5 +#define LARGE_KEY_SIZE 13 + +/* Number of supported channels */ +#define NUM_CHANNELS 14 + +/* Forward declarations */ +struct orinoco_private; + +int determine_fw_capabilities(struct orinoco_private *priv, char *fw_name, + size_t fw_name_len, u32 *hw_ver); +int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr); +int orinoco_hw_allocate_fid(struct orinoco_private *priv); +int orinoco_get_bitratemode(int bitrate, int automatic); +void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic); + +int orinoco_hw_program_rids(struct orinoco_private *priv); +int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc); +int __orinoco_hw_set_bitrate(struct orinoco_private *priv); +int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate); +int __orinoco_hw_set_wap(struct orinoco_private *priv); +int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv); +int __orinoco_hw_setup_enc(struct orinoco_private *priv); +int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx, + int set_tx, const u8 *key, const u8 *rsc, + size_t rsc_len, const u8 *tsc, size_t tsc_len); +int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx); +int __orinoco_hw_set_multicast_list(struct orinoco_private *priv, + struct net_device *dev, + int mc_count, int promisc); +int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, + char buf[IW_ESSID_MAX_SIZE + 1]); +int orinoco_hw_get_freq(struct orinoco_private *priv); +int orinoco_hw_get_bitratelist(struct orinoco_private *priv, + int *numrates, s32 *rates, int max); +int orinoco_hw_trigger_scan(struct orinoco_private *priv, + const struct cfg80211_ssid *ssid); +int orinoco_hw_disassociate(struct orinoco_private *priv, + u8 *addr, u16 reason_code); +int orinoco_hw_get_current_bssid(struct orinoco_private *priv, + u8 *addr); + +#endif /* _ORINOCO_HW_H_ */ diff --git a/drivers/net/wireless/intersil/orinoco/main.c b/drivers/net/wireless/intersil/orinoco/main.c new file mode 100644 index 000000000..7b5c55432 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/main.c @@ -0,0 +1,2429 @@ +/* main.c - (formerly known as dldwd_cs.c, orinoco_cs.c and orinoco.c) + * + * A driver for Hermes or Prism 2 chipset based PCMCIA wireless + * adaptors, with Lucent/Agere, Intersil or Symbol firmware. + * + * Current maintainers (as of 29 September 2003) are: + * Pavel Roskin <proski AT gnu.org> + * and David Gibson <hermes AT gibson.dropbear.id.au> + * + * (C) Copyright David Gibson, IBM Corporation 2001-2003. + * Copyright (C) 2000 David Gibson, Linuxcare Australia. + * With some help from : + * Copyright (C) 2001 Jean Tourrilhes, HP Labs + * Copyright (C) 2001 Benjamin Herrenschmidt + * + * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 + * + * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy + * AT fasta.fh-dortmund.de> + * http://www.stud.fh-dortmund.de/~andy/wvlan/ + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * <dahinds AT users.sourceforge.net>. Portions created by David + * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights + * Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. */ + +/* + * TODO + * o Handle de-encapsulation within network layer, provide 802.11 + * headers (patch from Thomas 'Dent' Mirlacher) + * o Fix possible races in SPY handling. + * o Disconnect wireless extensions from fundamental configuration. + * o (maybe) Software WEP support (patch from Stano Meduna). + * o (maybe) Use multiple Tx buffers - driver handling queue + * rather than firmware. + */ + +/* Locking and synchronization: + * + * The basic principle is that everything is serialized through a + * single spinlock, priv->lock. The lock is used in user, bh and irq + * context, so when taken outside hardirq context it should always be + * taken with interrupts disabled. The lock protects both the + * hardware and the struct orinoco_private. + * + * Another flag, priv->hw_unavailable indicates that the hardware is + * unavailable for an extended period of time (e.g. suspended, or in + * the middle of a hard reset). This flag is protected by the + * spinlock. All code which touches the hardware should check the + * flag after taking the lock, and if it is set, give up on whatever + * they are doing and drop the lock again. The orinoco_lock() + * function handles this (it unlocks and returns -EBUSY if + * hw_unavailable is non-zero). + */ + +#define DRIVER_NAME "orinoco" + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/suspend.h> +#include <linux/if_arp.h> +#include <linux/wireless.h> +#include <linux/ieee80211.h> +#include <net/iw_handler.h> +#include <net/cfg80211.h> + +#include "hermes_rid.h" +#include "hermes_dld.h" +#include "hw.h" +#include "scan.h" +#include "mic.h" +#include "fw.h" +#include "wext.h" +#include "cfg.h" +#include "main.h" + +#include "orinoco.h" + +/********************************************************************/ +/* Module information */ +/********************************************************************/ + +MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & " + "David Gibson <hermes@gibson.dropbear.id.au>"); +MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based " + "and similar wireless cards"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* Level of debugging. Used in the macros in orinoco.h */ +#ifdef ORINOCO_DEBUG +int orinoco_debug = ORINOCO_DEBUG; +EXPORT_SYMBOL(orinoco_debug); +module_param(orinoco_debug, int, 0644); +MODULE_PARM_DESC(orinoco_debug, "Debug level"); +#endif + +static bool suppress_linkstatus; /* = 0 */ +module_param(suppress_linkstatus, bool, 0644); +MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); + +static int ignore_disconnect; /* = 0 */ +module_param(ignore_disconnect, int, 0644); +MODULE_PARM_DESC(ignore_disconnect, + "Don't report lost link to the network layer"); + +int force_monitor; /* = 0 */ +module_param(force_monitor, int, 0644); +MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); + +/********************************************************************/ +/* Internal constants */ +/********************************************************************/ + +/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ +static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; +#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) + +#define ORINOCO_MIN_MTU 256 +#define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD) + +#define MAX_IRQLOOPS_PER_IRQ 10 +#define MAX_IRQLOOPS_PER_JIFFY (20000 / HZ) /* Based on a guestimate of + * how many events the + * device could + * legitimately generate */ + +#define DUMMY_FID 0xFFFF + +/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ + HERMES_MAX_MULTICAST : 0)*/ +#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) + +#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ + | HERMES_EV_TX | HERMES_EV_TXEXC \ + | HERMES_EV_WTERR | HERMES_EV_INFO \ + | HERMES_EV_INFDROP) + +/********************************************************************/ +/* Data types */ +/********************************************************************/ + +/* Beginning of the Tx descriptor, used in TxExc handling */ +struct hermes_txexc_data { + struct hermes_tx_descriptor desc; + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; +} __packed; + +/* Rx frame header except compatibility 802.3 header */ +struct hermes_rx_descriptor { + /* Control */ + __le16 status; + __le32 time; + u8 silence; + u8 signal; + u8 rate; + u8 rxflow; + __le32 reserved; + + /* 802.11 header */ + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + __le16 seq_ctl; + u8 addr4[ETH_ALEN]; + + /* Data length */ + __le16 data_len; +} __packed; + +struct orinoco_rx_data { + struct hermes_rx_descriptor *desc; + struct sk_buff *skb; + struct list_head list; +}; + +struct orinoco_scan_data { + void *buf; + size_t len; + int type; + struct list_head list; +}; + +/********************************************************************/ +/* Function prototypes */ +/********************************************************************/ + +static int __orinoco_set_multicast_list(struct net_device *dev); +static int __orinoco_up(struct orinoco_private *priv); +static int __orinoco_down(struct orinoco_private *priv); +static int __orinoco_commit(struct orinoco_private *priv); + +/********************************************************************/ +/* Internal helper functions */ +/********************************************************************/ + +void set_port_type(struct orinoco_private *priv) +{ + switch (priv->iw_mode) { + case NL80211_IFTYPE_STATION: + priv->port_type = 1; + priv->createibss = 0; + break; + case NL80211_IFTYPE_ADHOC: + if (priv->prefer_port3) { + priv->port_type = 3; + priv->createibss = 0; + } else { + priv->port_type = priv->ibss_port; + priv->createibss = 1; + } + break; + case NL80211_IFTYPE_MONITOR: + priv->port_type = 3; + priv->createibss = 0; + break; + default: + printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", + priv->ndev->name); + } +} + +/********************************************************************/ +/* Device methods */ +/********************************************************************/ + +int orinoco_open(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + int err; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = __orinoco_up(priv); + + if (!err) + priv->open = 1; + + orinoco_unlock(priv, &flags); + + return err; +} +EXPORT_SYMBOL(orinoco_open); + +int orinoco_stop(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + int err = 0; + + /* We mustn't use orinoco_lock() here, because we need to be + able to close the interface even if hw_unavailable is set + (e.g. as we're released after a PC Card removal) */ + orinoco_lock_irq(priv); + + priv->open = 0; + + err = __orinoco_down(priv); + + orinoco_unlock_irq(priv); + + return err; +} +EXPORT_SYMBOL(orinoco_stop); + +struct net_device_stats *orinoco_get_stats(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + + return &priv->stats; +} +EXPORT_SYMBOL(orinoco_get_stats); + +void orinoco_set_multicast_list(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " + "called when hw_unavailable\n", dev->name); + return; + } + + __orinoco_set_multicast_list(dev); + orinoco_unlock(priv, &flags); +} +EXPORT_SYMBOL(orinoco_set_multicast_list); + +int orinoco_change_mtu(struct net_device *dev, int new_mtu) +{ + struct orinoco_private *priv = ndev_priv(dev); + + if ((new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU)) + return -EINVAL; + + /* MTU + encapsulation + header length */ + if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) > + (priv->nicbuf_size - ETH_HLEN)) + return -EINVAL; + + dev->mtu = new_mtu; + + return 0; +} +EXPORT_SYMBOL(orinoco_change_mtu); + +/********************************************************************/ +/* Tx path */ +/********************************************************************/ + +/* Add encapsulation and MIC to the existing SKB. + * The main xmit routine will then send the whole lot to the card. + * Need 8 bytes headroom + * Need 8 bytes tailroom + * + * With encapsulated ethernet II frame + * -------- + * 803.3 header (14 bytes) + * dst[6] + * -------- src[6] + * 803.3 header (14 bytes) len[2] + * dst[6] 803.2 header (8 bytes) + * src[6] encaps[6] + * len[2] <- leave alone -> len[2] + * -------- -------- <-- 0 + * Payload Payload + * ... ... + * + * -------- -------- + * MIC (8 bytes) + * -------- + * + * returns 0 on success, -ENOMEM on error. + */ +int orinoco_process_xmit_skb(struct sk_buff *skb, + struct net_device *dev, + struct orinoco_private *priv, + int *tx_control, + u8 *mic_buf) +{ + struct orinoco_tkip_key *key; + struct ethhdr *eh; + int do_mic; + + key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key; + + do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) && + (key != NULL)); + + if (do_mic) + *tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) | + HERMES_TXCTRL_MIC; + + eh = (struct ethhdr *)skb->data; + + /* Encapsulate Ethernet-II frames */ + if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ + struct header_struct { + struct ethhdr eth; /* 802.3 header */ + u8 encap[6]; /* 802.2 header */ + } __packed hdr; + int len = skb->len + sizeof(encaps_hdr) - (2 * ETH_ALEN); + + if (skb_headroom(skb) < ENCAPS_OVERHEAD) { + if (net_ratelimit()) + printk(KERN_ERR + "%s: Not enough headroom for 802.2 headers %d\n", + dev->name, skb_headroom(skb)); + return -ENOMEM; + } + + /* Fill in new header */ + memcpy(&hdr.eth, eh, 2 * ETH_ALEN); + hdr.eth.h_proto = htons(len); + memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); + + /* Make room for the new header, and copy it in */ + eh = (struct ethhdr *) skb_push(skb, ENCAPS_OVERHEAD); + memcpy(eh, &hdr, sizeof(hdr)); + } + + /* Calculate Michael MIC */ + if (do_mic) { + size_t len = skb->len - ETH_HLEN; + u8 *mic = &mic_buf[0]; + + /* Have to write to an even address, so copy the spare + * byte across */ + if (skb->len % 2) { + *mic = skb->data[skb->len - 1]; + mic++; + } + + orinoco_mic(priv->tx_tfm_mic, key->tx_mic, + eh->h_dest, eh->h_source, 0 /* priority */, + skb->data + ETH_HLEN, + len, mic); + } + + return 0; +} +EXPORT_SYMBOL(orinoco_process_xmit_skb); + +static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct hermes *hw = &priv->hw; + int err = 0; + u16 txfid = priv->txfid; + int tx_control; + unsigned long flags; + u8 mic_buf[MICHAEL_MIC_LEN + 1]; + + if (!netif_running(dev)) { + printk(KERN_ERR "%s: Tx on stopped device!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (netif_queue_stopped(dev)) { + printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (!netif_carrier_ok(dev) || + (priv->iw_mode == NL80211_IFTYPE_MONITOR)) { + /* Oops, the firmware hasn't established a connection, + silently drop the packet (this seems to be the + safest approach). */ + goto drop; + } + + /* Check packet length */ + if (skb->len < ETH_HLEN) + goto drop; + + tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX; + + err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control, + &mic_buf[0]); + if (err) + goto drop; + + if (priv->has_alt_txcntl) { + /* WPA enabled firmwares have tx_cntl at the end of + * the 802.11 header. So write zeroed descriptor and + * 802.11 header at the same time + */ + char desc[HERMES_802_3_OFFSET]; + __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET]; + + memset(&desc, 0, sizeof(desc)); + + *txcntl = cpu_to_le16(tx_control); + err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx " + "descriptor to BAP\n", dev->name, err); + goto busy; + } + } else { + struct hermes_tx_descriptor desc; + + memset(&desc, 0, sizeof(desc)); + + desc.tx_control = cpu_to_le16(tx_control); + err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx " + "descriptor to BAP\n", dev->name, err); + goto busy; + } + + /* Clear the 802.11 header and data length fields - some + * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused + * if this isn't done. */ + hermes_clear_words(hw, HERMES_DATA0, + HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); + } + + err = hw->ops->bap_pwrite(hw, USER_BAP, skb->data, skb->len, + txfid, HERMES_802_3_OFFSET); + if (err) { + printk(KERN_ERR "%s: Error %d writing packet to BAP\n", + dev->name, err); + goto busy; + } + + if (tx_control & HERMES_TXCTRL_MIC) { + size_t offset = HERMES_802_3_OFFSET + skb->len; + size_t len = MICHAEL_MIC_LEN; + + if (offset % 2) { + offset--; + len++; + } + err = hw->ops->bap_pwrite(hw, USER_BAP, &mic_buf[0], len, + txfid, offset); + if (err) { + printk(KERN_ERR "%s: Error %d writing MIC to BAP\n", + dev->name, err); + goto busy; + } + } + + /* Finally, we actually initiate the send */ + netif_stop_queue(dev); + + err = hw->ops->cmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, + txfid, NULL); + if (err) { + netif_start_queue(dev); + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d transmitting packet\n", + dev->name, err); + goto busy; + } + + stats->tx_bytes += HERMES_802_3_OFFSET + skb->len; + goto ok; + + drop: + stats->tx_errors++; + stats->tx_dropped++; + + ok: + orinoco_unlock(priv, &flags); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + + busy: + if (err == -EIO) + schedule_work(&priv->reset_work); + orinoco_unlock(priv, &flags); + return NETDEV_TX_BUSY; +} + +static void __orinoco_ev_alloc(struct net_device *dev, struct hermes *hw) +{ + struct orinoco_private *priv = ndev_priv(dev); + u16 fid = hermes_read_regn(hw, ALLOCFID); + + if (fid != priv->txfid) { + if (fid != DUMMY_FID) + printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", + dev->name, fid); + return; + } + + hermes_write_regn(hw, ALLOCFID, DUMMY_FID); +} + +static void __orinoco_ev_tx(struct net_device *dev, struct hermes *hw) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + + stats->tx_packets++; + + netif_wake_queue(dev); + + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); +} + +static void __orinoco_ev_txexc(struct net_device *dev, struct hermes *hw) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + u16 fid = hermes_read_regn(hw, TXCOMPLFID); + u16 status; + struct hermes_txexc_data hdr; + int err = 0; + + if (fid == DUMMY_FID) + return; /* Nothing's really happened */ + + /* Read part of the frame header - we need status and addr1 */ + err = hw->ops->bap_pread(hw, IRQ_BAP, &hdr, + sizeof(struct hermes_txexc_data), + fid, 0); + + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); + stats->tx_errors++; + + if (err) { + printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " + "(FID=%04X error %d)\n", + dev->name, fid, err); + return; + } + + DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, + err, fid); + + /* We produce a TXDROP event only for retry or lifetime + * exceeded, because that's the only status that really mean + * that this particular node went away. + * Other errors means that *we* screwed up. - Jean II */ + status = le16_to_cpu(hdr.desc.status); + if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { + union iwreq_data wrqu; + + /* Copy 802.11 dest address. + * We use the 802.11 header because the frame may + * not be 802.3 or may be mangled... + * In Ad-Hoc mode, it will be the node address. + * In managed mode, it will be most likely the AP addr + * User space will figure out how to convert it to + * whatever it needs (IP address or else). + * - Jean II */ + memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); + } + + netif_wake_queue(dev); +} + +void orinoco_tx_timeout(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct hermes *hw = &priv->hw; + + printk(KERN_WARNING "%s: Tx timeout! " + "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", + dev->name, hermes_read_regn(hw, ALLOCFID), + hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); + + stats->tx_errors++; + + schedule_work(&priv->reset_work); +} +EXPORT_SYMBOL(orinoco_tx_timeout); + +/********************************************************************/ +/* Rx path (data frames) */ +/********************************************************************/ + +/* Does the frame have a SNAP header indicating it should be + * de-encapsulated to Ethernet-II? */ +static inline int is_ethersnap(void *_hdr) +{ + u8 *hdr = _hdr; + + /* We de-encapsulate all packets which, a) have SNAP headers + * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header + * and where b) the OUI of the SNAP header is 00:00:00 or + * 00:00:f8 - we need both because different APs appear to use + * different OUIs for some reason */ + return (memcmp(hdr, &encaps_hdr, 5) == 0) + && ((hdr[5] == 0x00) || (hdr[5] == 0xf8)); +} + +static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, + int level, int noise) +{ + struct iw_quality wstats; + wstats.level = level - 0x95; + wstats.noise = noise - 0x95; + wstats.qual = (level > noise) ? (level - noise) : 0; + wstats.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; + /* Update spy records */ + wireless_spy_update(dev, mac, &wstats); +} + +static void orinoco_stat_gather(struct net_device *dev, + struct sk_buff *skb, + struct hermes_rx_descriptor *desc) +{ + struct orinoco_private *priv = ndev_priv(dev); + + /* Using spy support with lots of Rx packets, like in an + * infrastructure (AP), will really slow down everything, because + * the MAC address must be compared to each entry of the spy list. + * If the user really asks for it (set some address in the + * spy list), we do it, but he will pay the price. + * Note that to get here, you need both WIRELESS_SPY + * compiled in AND some addresses in the list !!! + */ + /* Note : gcc will optimise the whole section away if + * WIRELESS_SPY is not defined... - Jean II */ + if (SPY_NUMBER(priv)) { + orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN, + desc->signal, desc->silence); + } +} + +/* + * orinoco_rx_monitor - handle received monitor frames. + * + * Arguments: + * dev network device + * rxfid received FID + * desc rx descriptor of the frame + * + * Call context: interrupt + */ +static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, + struct hermes_rx_descriptor *desc) +{ + u32 hdrlen = 30; /* return full header by default */ + u32 datalen = 0; + u16 fc; + int err; + int len; + struct sk_buff *skb; + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct hermes *hw = &priv->hw; + + len = le16_to_cpu(desc->data_len); + + /* Determine the size of the header and the data */ + fc = le16_to_cpu(desc->frame_ctl); + switch (fc & IEEE80211_FCTL_FTYPE) { + case IEEE80211_FTYPE_DATA: + if ((fc & IEEE80211_FCTL_TODS) + && (fc & IEEE80211_FCTL_FROMDS)) + hdrlen = 30; + else + hdrlen = 24; + datalen = len; + break; + case IEEE80211_FTYPE_MGMT: + hdrlen = 24; + datalen = len; + break; + case IEEE80211_FTYPE_CTL: + switch (fc & IEEE80211_FCTL_STYPE) { + case IEEE80211_STYPE_PSPOLL: + case IEEE80211_STYPE_RTS: + case IEEE80211_STYPE_CFEND: + case IEEE80211_STYPE_CFENDACK: + hdrlen = 16; + break; + case IEEE80211_STYPE_CTS: + case IEEE80211_STYPE_ACK: + hdrlen = 10; + break; + } + break; + default: + /* Unknown frame type */ + break; + } + + /* sanity check the length */ + if (datalen > IEEE80211_MAX_DATA_LEN + 12) { + printk(KERN_DEBUG "%s: oversized monitor frame, " + "data length = %d\n", dev->name, datalen); + stats->rx_length_errors++; + goto update_stats; + } + + skb = dev_alloc_skb(hdrlen + datalen); + if (!skb) { + printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", + dev->name); + goto update_stats; + } + + /* Copy the 802.11 header to the skb */ + memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen); + skb_reset_mac_header(skb); + + /* If any, copy the data from the card to the skb */ + if (datalen > 0) { + err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), + ALIGN(datalen, 2), rxfid, + HERMES_802_2_OFFSET); + if (err) { + printk(KERN_ERR "%s: error %d reading monitor frame\n", + dev->name, err); + goto drop; + } + } + + skb->dev = dev; + skb->ip_summed = CHECKSUM_NONE; + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = cpu_to_be16(ETH_P_802_2); + + stats->rx_packets++; + stats->rx_bytes += skb->len; + + netif_rx(skb); + return; + + drop: + dev_kfree_skb_irq(skb); + update_stats: + stats->rx_errors++; + stats->rx_dropped++; +} + +void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct iw_statistics *wstats = &priv->wstats; + struct sk_buff *skb = NULL; + u16 rxfid, status; + int length; + struct hermes_rx_descriptor *desc; + struct orinoco_rx_data *rx_data; + int err; + + desc = kmalloc(sizeof(*desc), GFP_ATOMIC); + if (!desc) + goto update_stats; + + rxfid = hermes_read_regn(hw, RXFID); + + err = hw->ops->bap_pread(hw, IRQ_BAP, desc, sizeof(*desc), + rxfid, 0); + if (err) { + printk(KERN_ERR "%s: error %d reading Rx descriptor. " + "Frame dropped.\n", dev->name, err); + goto update_stats; + } + + status = le16_to_cpu(desc->status); + + if (status & HERMES_RXSTAT_BADCRC) { + DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", + dev->name); + stats->rx_crc_errors++; + goto update_stats; + } + + /* Handle frames in monitor mode */ + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { + orinoco_rx_monitor(dev, rxfid, desc); + goto out; + } + + if (status & HERMES_RXSTAT_UNDECRYPTABLE) { + DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", + dev->name); + wstats->discard.code++; + goto update_stats; + } + + length = le16_to_cpu(desc->data_len); + + /* Sanity checks */ + if (length < 3) { /* No for even an 802.2 LLC header */ + /* At least on Symbol firmware with PCF we get quite a + lot of these legitimately - Poll frames with no + data. */ + goto out; + } + if (length > IEEE80211_MAX_DATA_LEN) { + printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", + dev->name, length); + stats->rx_length_errors++; + goto update_stats; + } + + /* Payload size does not include Michael MIC. Increase payload + * size to read it together with the data. */ + if (status & HERMES_RXSTAT_MIC) + length += MICHAEL_MIC_LEN; + + /* We need space for the packet data itself, plus an ethernet + header, plus 2 bytes so we can align the IP header on a + 32bit boundary, plus 1 byte so we can read in odd length + packets from the card, which has an IO granularity of 16 + bits */ + skb = dev_alloc_skb(length + ETH_HLEN + 2 + 1); + if (!skb) { + printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", + dev->name); + goto update_stats; + } + + /* We'll prepend the header, so reserve space for it. The worst + case is no decapsulation, when 802.3 header is prepended and + nothing is removed. 2 is for aligning the IP header. */ + skb_reserve(skb, ETH_HLEN + 2); + + err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, length), + ALIGN(length, 2), rxfid, + HERMES_802_2_OFFSET); + if (err) { + printk(KERN_ERR "%s: error %d reading frame. " + "Frame dropped.\n", dev->name, err); + goto drop; + } + + /* Add desc and skb to rx queue */ + rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC); + if (!rx_data) + goto drop; + + rx_data->desc = desc; + rx_data->skb = skb; + list_add_tail(&rx_data->list, &priv->rx_list); + tasklet_schedule(&priv->rx_tasklet); + + return; + +drop: + dev_kfree_skb_irq(skb); +update_stats: + stats->rx_errors++; + stats->rx_dropped++; +out: + kfree(desc); +} +EXPORT_SYMBOL(__orinoco_ev_rx); + +static void orinoco_rx(struct net_device *dev, + struct hermes_rx_descriptor *desc, + struct sk_buff *skb) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + u16 status, fc; + int length; + struct ethhdr *hdr; + + status = le16_to_cpu(desc->status); + length = le16_to_cpu(desc->data_len); + fc = le16_to_cpu(desc->frame_ctl); + + /* Calculate and check MIC */ + if (status & HERMES_RXSTAT_MIC) { + struct orinoco_tkip_key *key; + int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >> + HERMES_MIC_KEY_ID_SHIFT); + u8 mic[MICHAEL_MIC_LEN]; + u8 *rxmic; + u8 *src = (fc & IEEE80211_FCTL_FROMDS) ? + desc->addr3 : desc->addr2; + + /* Extract Michael MIC from payload */ + rxmic = skb->data + skb->len - MICHAEL_MIC_LEN; + + skb_trim(skb, skb->len - MICHAEL_MIC_LEN); + length -= MICHAEL_MIC_LEN; + + key = (struct orinoco_tkip_key *) priv->keys[key_id].key; + + if (!key) { + printk(KERN_WARNING "%s: Received encrypted frame from " + "%pM using key %i, but key is not installed\n", + dev->name, src, key_id); + goto drop; + } + + orinoco_mic(priv->rx_tfm_mic, key->rx_mic, desc->addr1, src, + 0, /* priority or QoS? */ + skb->data, skb->len, &mic[0]); + + if (memcmp(mic, rxmic, + MICHAEL_MIC_LEN)) { + union iwreq_data wrqu; + struct iw_michaelmicfailure wxmic; + + printk(KERN_WARNING "%s: " + "Invalid Michael MIC in data frame from %pM, " + "using key %i\n", + dev->name, src, key_id); + + /* TODO: update stats */ + + /* Notify userspace */ + memset(&wxmic, 0, sizeof(wxmic)); + wxmic.flags = key_id & IW_MICFAILURE_KEY_ID; + wxmic.flags |= (desc->addr1[0] & 1) ? + IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE; + wxmic.src_addr.sa_family = ARPHRD_ETHER; + memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN); + + (void) orinoco_hw_get_tkip_iv(priv, key_id, + &wxmic.tsc[0]); + + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.data.length = sizeof(wxmic); + wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, + (char *) &wxmic); + + goto drop; + } + } + + /* Handle decapsulation + * In most cases, the firmware tell us about SNAP frames. + * For some reason, the SNAP frames sent by LinkSys APs + * are not properly recognised by most firmwares. + * So, check ourselves */ + if (length >= ENCAPS_OVERHEAD && + (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || + ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || + is_ethersnap(skb->data))) { + /* These indicate a SNAP within 802.2 LLC within + 802.11 frame which we'll need to de-encapsulate to + the original EthernetII frame. */ + hdr = (struct ethhdr *)skb_push(skb, + ETH_HLEN - ENCAPS_OVERHEAD); + } else { + /* 802.3 frame - prepend 802.3 header as is */ + hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); + hdr->h_proto = htons(length); + } + memcpy(hdr->h_dest, desc->addr1, ETH_ALEN); + if (fc & IEEE80211_FCTL_FROMDS) + memcpy(hdr->h_source, desc->addr3, ETH_ALEN); + else + memcpy(hdr->h_source, desc->addr2, ETH_ALEN); + + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_NONE; + if (fc & IEEE80211_FCTL_TODS) + skb->pkt_type = PACKET_OTHERHOST; + + /* Process the wireless stats if needed */ + orinoco_stat_gather(dev, skb, desc); + + /* Pass the packet to the networking stack */ + netif_rx(skb); + stats->rx_packets++; + stats->rx_bytes += length; + + return; + + drop: + dev_kfree_skb(skb); + stats->rx_errors++; + stats->rx_dropped++; +} + +static void orinoco_rx_isr_tasklet(unsigned long data) +{ + struct orinoco_private *priv = (struct orinoco_private *) data; + struct net_device *dev = priv->ndev; + struct orinoco_rx_data *rx_data, *temp; + struct hermes_rx_descriptor *desc; + struct sk_buff *skb; + unsigned long flags; + + /* orinoco_rx requires the driver lock, and we also need to + * protect priv->rx_list, so just hold the lock over the + * lot. + * + * If orinoco_lock fails, we've unplugged the card. In this + * case just abort. */ + if (orinoco_lock(priv, &flags) != 0) + return; + + /* extract desc and skb from queue */ + list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { + desc = rx_data->desc; + skb = rx_data->skb; + list_del(&rx_data->list); + kfree(rx_data); + + orinoco_rx(dev, desc, skb); + + kfree(desc); + } + + orinoco_unlock(priv, &flags); +} + +/********************************************************************/ +/* Rx path (info frames) */ +/********************************************************************/ + +static void print_linkstatus(struct net_device *dev, u16 status) +{ + char *s; + + if (suppress_linkstatus) + return; + + switch (status) { + case HERMES_LINKSTATUS_NOT_CONNECTED: + s = "Not Connected"; + break; + case HERMES_LINKSTATUS_CONNECTED: + s = "Connected"; + break; + case HERMES_LINKSTATUS_DISCONNECTED: + s = "Disconnected"; + break; + case HERMES_LINKSTATUS_AP_CHANGE: + s = "AP Changed"; + break; + case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: + s = "AP Out of Range"; + break; + case HERMES_LINKSTATUS_AP_IN_RANGE: + s = "AP In Range"; + break; + case HERMES_LINKSTATUS_ASSOC_FAILED: + s = "Association Failed"; + break; + default: + s = "UNKNOWN"; + } + + printk(KERN_DEBUG "%s: New link status: %s (%04x)\n", + dev->name, s, status); +} + +/* Search scan results for requested BSSID, join it if found */ +static void orinoco_join_ap(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, join_work); + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + unsigned long flags; + struct join_req { + u8 bssid[ETH_ALEN]; + __le16 channel; + } __packed req; + const int atom_len = offsetof(struct prism2_scan_apinfo, atim); + struct prism2_scan_apinfo *atom = NULL; + int offset = 4; + int found = 0; + u8 *buf; + u16 len; + + /* Allocate buffer for scan results */ + buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL); + if (!buf) + return; + + if (orinoco_lock(priv, &flags) != 0) + goto fail_lock; + + /* Sanity checks in case user changed something in the meantime */ + if (!priv->bssid_fixed) + goto out; + + if (strlen(priv->desired_essid) == 0) + goto out; + + /* Read scan results from the firmware */ + err = hw->ops->read_ltv(hw, USER_BAP, + HERMES_RID_SCANRESULTSTABLE, + MAX_SCAN_LEN, &len, buf); + if (err) { + printk(KERN_ERR "%s: Cannot read scan results\n", + dev->name); + goto out; + } + + len = HERMES_RECLEN_TO_BYTES(len); + + /* Go through the scan results looking for the channel of the AP + * we were requested to join */ + for (; offset + atom_len <= len; offset += atom_len) { + atom = (struct prism2_scan_apinfo *) (buf + offset); + if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) { + found = 1; + break; + } + } + + if (!found) { + DEBUG(1, "%s: Requested AP not found in scan results\n", + dev->name); + goto out; + } + + memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); + req.channel = atom->channel; /* both are little-endian */ + err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, + &req); + if (err) + printk(KERN_ERR "%s: Error issuing join request\n", dev->name); + + out: + orinoco_unlock(priv, &flags); + + fail_lock: + kfree(buf); +} + +/* Send new BSSID to userspace */ +static void orinoco_send_bssid_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, wrqu.ap_addr.sa_data); + if (err != 0) + return; + + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); +} + +static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + u8 buf[88]; + u8 *ie; + + if (!priv->has_wpa) + return; + + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO, + sizeof(buf), NULL, &buf); + if (err != 0) + return; + + ie = orinoco_get_wpa_ie(buf, sizeof(buf)); + if (ie) { + int rem = sizeof(buf) - (ie - &buf[0]); + wrqu.data.length = ie[1] + 2; + if (wrqu.data.length > rem) + wrqu.data.length = rem; + + if (wrqu.data.length) + /* Send event to user space */ + wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie); + } +} + +static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */ + u8 *ie; + + if (!priv->has_wpa) + return; + + err = hw->ops->read_ltv(hw, USER_BAP, + HERMES_RID_CURRENT_ASSOC_RESP_INFO, + sizeof(buf), NULL, &buf); + if (err != 0) + return; + + ie = orinoco_get_wpa_ie(buf, sizeof(buf)); + if (ie) { + int rem = sizeof(buf) - (ie - &buf[0]); + wrqu.data.length = ie[1] + 2; + if (wrqu.data.length > rem) + wrqu.data.length = rem; + + if (wrqu.data.length) + /* Send event to user space */ + wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie); + } +} + +static void orinoco_send_wevents(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, wevent_work); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return; + + orinoco_send_assocreqie_wevent(priv); + orinoco_send_assocrespie_wevent(priv); + orinoco_send_bssid_wevent(priv); + + orinoco_unlock(priv, &flags); +} + +static void qbuf_scan(struct orinoco_private *priv, void *buf, + int len, int type) +{ + struct orinoco_scan_data *sd; + unsigned long flags; + + sd = kmalloc(sizeof(*sd), GFP_ATOMIC); + if (!sd) + return; + + sd->buf = buf; + sd->len = len; + sd->type = type; + + spin_lock_irqsave(&priv->scan_lock, flags); + list_add_tail(&sd->list, &priv->scan_list); + spin_unlock_irqrestore(&priv->scan_lock, flags); + + schedule_work(&priv->process_scan); +} + +static void qabort_scan(struct orinoco_private *priv) +{ + struct orinoco_scan_data *sd; + unsigned long flags; + + sd = kmalloc(sizeof(*sd), GFP_ATOMIC); + if (!sd) + return; + + sd->len = -1; /* Abort */ + + spin_lock_irqsave(&priv->scan_lock, flags); + list_add_tail(&sd->list, &priv->scan_list); + spin_unlock_irqrestore(&priv->scan_lock, flags); + + schedule_work(&priv->process_scan); +} + +static void orinoco_process_scan_results(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, process_scan); + struct orinoco_scan_data *sd, *temp; + unsigned long flags; + void *buf; + int len; + int type; + + spin_lock_irqsave(&priv->scan_lock, flags); + list_for_each_entry_safe(sd, temp, &priv->scan_list, list) { + + buf = sd->buf; + len = sd->len; + type = sd->type; + + list_del(&sd->list); + spin_unlock_irqrestore(&priv->scan_lock, flags); + kfree(sd); + + if (len > 0) { + if (type == HERMES_INQ_CHANNELINFO) + orinoco_add_extscan_result(priv, buf, len); + else + orinoco_add_hostscan_results(priv, buf, len); + + kfree(buf); + } else { + /* Either abort or complete the scan */ + orinoco_scan_done(priv, (len < 0)); + } + + spin_lock_irqsave(&priv->scan_lock, flags); + } + spin_unlock_irqrestore(&priv->scan_lock, flags); +} + +void __orinoco_ev_info(struct net_device *dev, struct hermes *hw) +{ + struct orinoco_private *priv = ndev_priv(dev); + u16 infofid; + struct { + __le16 len; + __le16 type; + } __packed info; + int len, type; + int err; + + /* This is an answer to an INQUIRE command that we did earlier, + * or an information "event" generated by the card + * The controller return to us a pseudo frame containing + * the information in question - Jean II */ + infofid = hermes_read_regn(hw, INFOFID); + + /* Read the info frame header - don't try too hard */ + err = hw->ops->bap_pread(hw, IRQ_BAP, &info, sizeof(info), + infofid, 0); + if (err) { + printk(KERN_ERR "%s: error %d reading info frame. " + "Frame dropped.\n", dev->name, err); + return; + } + + len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); + type = le16_to_cpu(info.type); + + switch (type) { + case HERMES_INQ_TALLIES: { + struct hermes_tallies_frame tallies; + struct iw_statistics *wstats = &priv->wstats; + + if (len > sizeof(tallies)) { + printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", + dev->name, len); + len = sizeof(tallies); + } + + err = hw->ops->bap_pread(hw, IRQ_BAP, &tallies, len, + infofid, sizeof(info)); + if (err) + break; + + /* Increment our various counters */ + /* wstats->discard.nwid - no wrong BSSID stuff */ + wstats->discard.code += + le16_to_cpu(tallies.RxWEPUndecryptable); + if (len == sizeof(tallies)) + wstats->discard.code += + le16_to_cpu(tallies.RxDiscards_WEPICVError) + + le16_to_cpu(tallies.RxDiscards_WEPExcluded); + wstats->discard.misc += + le16_to_cpu(tallies.TxDiscardsWrongSA); + wstats->discard.fragment += + le16_to_cpu(tallies.RxMsgInBadMsgFragments); + wstats->discard.retries += + le16_to_cpu(tallies.TxRetryLimitExceeded); + /* wstats->miss.beacon - no match */ + } + break; + case HERMES_INQ_LINKSTATUS: { + struct hermes_linkstatus linkstatus; + u16 newstatus; + int connected; + + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) + break; + + if (len != sizeof(linkstatus)) { + printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", + dev->name, len); + break; + } + + err = hw->ops->bap_pread(hw, IRQ_BAP, &linkstatus, len, + infofid, sizeof(info)); + if (err) + break; + newstatus = le16_to_cpu(linkstatus.linkstatus); + + /* Symbol firmware uses "out of range" to signal that + * the hostscan frame can be requested. */ + if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && + priv->firmware_type == FIRMWARE_TYPE_SYMBOL && + priv->has_hostscan && priv->scan_request) { + hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); + break; + } + + connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) + || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) + || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); + + if (connected) + netif_carrier_on(dev); + else if (!ignore_disconnect) + netif_carrier_off(dev); + + if (newstatus != priv->last_linkstatus) { + priv->last_linkstatus = newstatus; + print_linkstatus(dev, newstatus); + /* The info frame contains only one word which is the + * status (see hermes.h). The status is pretty boring + * in itself, that's why we export the new BSSID... + * Jean II */ + schedule_work(&priv->wevent_work); + } + } + break; + case HERMES_INQ_SCAN: + if (!priv->scan_request && priv->bssid_fixed && + priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { + schedule_work(&priv->join_work); + break; + } + /* fall through */ + case HERMES_INQ_HOSTSCAN: + case HERMES_INQ_HOSTSCAN_SYMBOL: { + /* Result of a scanning. Contains information about + * cells in the vicinity - Jean II */ + unsigned char *buf; + + /* Sanity check */ + if (len > 4096) { + printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", + dev->name, len); + qabort_scan(priv); + break; + } + + /* Allocate buffer for results */ + buf = kmalloc(len, GFP_ATOMIC); + if (buf == NULL) { + /* No memory, so can't printk()... */ + qabort_scan(priv); + break; + } + + /* Read scan data */ + err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) buf, len, + infofid, sizeof(info)); + if (err) { + kfree(buf); + qabort_scan(priv); + break; + } + +#ifdef ORINOCO_DEBUG + { + int i; + printk(KERN_DEBUG "Scan result [%02X", buf[0]); + for (i = 1; i < (len * 2); i++) + printk(":%02X", buf[i]); + printk("]\n"); + } +#endif /* ORINOCO_DEBUG */ + + qbuf_scan(priv, buf, len, type); + } + break; + case HERMES_INQ_CHANNELINFO: + { + struct agere_ext_scan_info *bss; + + if (!priv->scan_request) { + printk(KERN_DEBUG "%s: Got chaninfo without scan, " + "len=%d\n", dev->name, len); + break; + } + + /* An empty result indicates that the scan is complete */ + if (len == 0) { + qbuf_scan(priv, NULL, len, type); + break; + } + + /* Sanity check */ + else if (len < (offsetof(struct agere_ext_scan_info, + data) + 2)) { + /* Drop this result now so we don't have to + * keep checking later */ + printk(KERN_WARNING + "%s: Ext scan results too short (%d bytes)\n", + dev->name, len); + break; + } + + bss = kmalloc(len, GFP_ATOMIC); + if (bss == NULL) + break; + + /* Read scan data */ + err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) bss, len, + infofid, sizeof(info)); + if (err) + kfree(bss); + else + qbuf_scan(priv, bss, len, type); + + break; + } + case HERMES_INQ_SEC_STAT_AGERE: + /* Security status (Agere specific) */ + /* Ignore this frame for now */ + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) + break; + /* fall through */ + default: + printk(KERN_DEBUG "%s: Unknown information frame received: " + "type 0x%04x, length %d\n", dev->name, type, len); + /* We don't actually do anything about it */ + break; + } +} +EXPORT_SYMBOL(__orinoco_ev_info); + +static void __orinoco_ev_infdrop(struct net_device *dev, struct hermes *hw) +{ + if (net_ratelimit()) + printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); +} + +/********************************************************************/ +/* Internal hardware control routines */ +/********************************************************************/ + +static int __orinoco_up(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + + netif_carrier_off(dev); /* just to make sure */ + + err = __orinoco_commit(priv); + if (err) { + printk(KERN_ERR "%s: Error %d configuring card\n", + dev->name, err); + return err; + } + + /* Fire things up again */ + hermes_set_irqmask(hw, ORINOCO_INTEN); + err = hermes_enable_port(hw, 0); + if (err) { + printk(KERN_ERR "%s: Error %d enabling MAC port\n", + dev->name, err); + return err; + } + + netif_start_queue(dev); + + return 0; +} + +static int __orinoco_down(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + + netif_stop_queue(dev); + + if (!priv->hw_unavailable) { + if (!priv->broken_disableport) { + err = hermes_disable_port(hw, 0); + if (err) { + /* Some firmwares (e.g. Intersil 1.3.x) seem + * to have problems disabling the port, oh + * well, too bad. */ + printk(KERN_WARNING "%s: Error %d disabling MAC port\n", + dev->name, err); + priv->broken_disableport = 1; + } + } + hermes_set_irqmask(hw, 0); + hermes_write_regn(hw, EVACK, 0xffff); + } + + orinoco_scan_done(priv, true); + + /* firmware will have to reassociate */ + netif_carrier_off(dev); + priv->last_linkstatus = 0xffff; + + return 0; +} + +static int orinoco_reinit_firmware(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + int err; + + err = hw->ops->init(hw); + if (priv->do_fw_download && !err) { + err = orinoco_download(priv); + if (err) + priv->do_fw_download = 0; + } + if (!err) + err = orinoco_hw_allocate_fid(priv); + + return err; +} + +static int +__orinoco_set_multicast_list(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + int err = 0; + int promisc, mc_count; + + /* The Hermes doesn't seem to have an allmulti mode, so we go + * into promiscuous mode and let the upper levels deal. */ + if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || + (netdev_mc_count(dev) > MAX_MULTICAST(priv))) { + promisc = 1; + mc_count = 0; + } else { + promisc = 0; + mc_count = netdev_mc_count(dev); + } + + err = __orinoco_hw_set_multicast_list(priv, dev, mc_count, promisc); + + return err; +} + +/* This must be called from user context, without locks held - use + * schedule_work() */ +void orinoco_reset(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, reset_work); + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + /* When the hardware becomes available again, whatever + * detects that is responsible for re-initializing + * it. So no need for anything further */ + return; + + netif_stop_queue(dev); + + /* Shut off interrupts. Depending on what state the hardware + * is in, this might not work, but we'll try anyway */ + hermes_set_irqmask(hw, 0); + hermes_write_regn(hw, EVACK, 0xffff); + + priv->hw_unavailable++; + priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ + netif_carrier_off(dev); + + orinoco_unlock(priv, &flags); + + /* Scanning support: Notify scan cancellation */ + orinoco_scan_done(priv, true); + + if (priv->hard_reset) { + err = (*priv->hard_reset)(priv); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d " + "performing hard reset\n", dev->name, err); + goto disable; + } + } + + err = orinoco_reinit_firmware(priv); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", + dev->name, err); + goto disable; + } + + /* This has to be called from user context */ + orinoco_lock_irq(priv); + + priv->hw_unavailable--; + + /* priv->open or priv->hw_unavailable might have changed while + * we dropped the lock */ + if (priv->open && (!priv->hw_unavailable)) { + err = __orinoco_up(priv); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", + dev->name, err); + } else + dev->trans_start = jiffies; + } + + orinoco_unlock_irq(priv); + + return; + disable: + hermes_set_irqmask(hw, 0); + netif_device_detach(dev); + printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); +} + +static int __orinoco_commit(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + int err = 0; + + /* If we've called commit, we are reconfiguring or bringing the + * interface up. Maintaining countermeasures across this would + * be confusing, so note that we've disabled them. The port will + * be enabled later in orinoco_commit or __orinoco_up. */ + priv->tkip_cm_active = 0; + + err = orinoco_hw_program_rids(priv); + + /* FIXME: what about netif_tx_lock */ + (void) __orinoco_set_multicast_list(dev); + + return err; +} + +/* Ensures configuration changes are applied. May result in a reset. + * The caller should hold priv->lock + */ +int orinoco_commit(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + + if (priv->broken_disableport) { + schedule_work(&priv->reset_work); + return 0; + } + + err = hermes_disable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to disable port " + "while reconfiguring card\n", dev->name); + priv->broken_disableport = 1; + goto out; + } + + err = __orinoco_commit(priv); + if (err) { + printk(KERN_WARNING "%s: Unable to reconfigure card\n", + dev->name); + goto out; + } + + err = hermes_enable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", + dev->name); + goto out; + } + + out: + if (err) { + printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); + schedule_work(&priv->reset_work); + err = 0; + } + return err; +} + +/********************************************************************/ +/* Interrupt handler */ +/********************************************************************/ + +static void __orinoco_ev_tick(struct net_device *dev, struct hermes *hw) +{ + printk(KERN_DEBUG "%s: TICK\n", dev->name); +} + +static void __orinoco_ev_wterr(struct net_device *dev, struct hermes *hw) +{ + /* This seems to happen a fair bit under load, but ignoring it + seems to work fine...*/ + printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", + dev->name); +} + +irqreturn_t orinoco_interrupt(int irq, void *dev_id) +{ + struct orinoco_private *priv = dev_id; + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int count = MAX_IRQLOOPS_PER_IRQ; + u16 evstat, events; + /* These are used to detect a runaway interrupt situation. + * + * If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, + * we panic and shut down the hardware + */ + /* jiffies value the last time we were called */ + static int last_irq_jiffy; /* = 0 */ + static int loops_this_jiffy; /* = 0 */ + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) { + /* If hw is unavailable - we don't know if the irq was + * for us or not */ + return IRQ_HANDLED; + } + + evstat = hermes_read_regn(hw, EVSTAT); + events = evstat & hw->inten; + if (!events) { + orinoco_unlock(priv, &flags); + return IRQ_NONE; + } + + if (jiffies != last_irq_jiffy) + loops_this_jiffy = 0; + last_irq_jiffy = jiffies; + + while (events && count--) { + if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { + printk(KERN_WARNING "%s: IRQ handler is looping too " + "much! Resetting.\n", dev->name); + /* Disable interrupts for now */ + hermes_set_irqmask(hw, 0); + schedule_work(&priv->reset_work); + break; + } + + /* Check the card hasn't been removed */ + if (!hermes_present(hw)) { + DEBUG(0, "orinoco_interrupt(): card removed\n"); + break; + } + + if (events & HERMES_EV_TICK) + __orinoco_ev_tick(dev, hw); + if (events & HERMES_EV_WTERR) + __orinoco_ev_wterr(dev, hw); + if (events & HERMES_EV_INFDROP) + __orinoco_ev_infdrop(dev, hw); + if (events & HERMES_EV_INFO) + __orinoco_ev_info(dev, hw); + if (events & HERMES_EV_RX) + __orinoco_ev_rx(dev, hw); + if (events & HERMES_EV_TXEXC) + __orinoco_ev_txexc(dev, hw); + if (events & HERMES_EV_TX) + __orinoco_ev_tx(dev, hw); + if (events & HERMES_EV_ALLOC) + __orinoco_ev_alloc(dev, hw); + + hermes_write_regn(hw, EVACK, evstat); + + evstat = hermes_read_regn(hw, EVSTAT); + events = evstat & hw->inten; + } + + orinoco_unlock(priv, &flags); + return IRQ_HANDLED; +} +EXPORT_SYMBOL(orinoco_interrupt); + +/********************************************************************/ +/* Power management */ +/********************************************************************/ +#if defined(CONFIG_PM_SLEEP) && !defined(CONFIG_HERMES_CACHE_FW_ON_INIT) +static int orinoco_pm_notifier(struct notifier_block *notifier, + unsigned long pm_event, + void *unused) +{ + struct orinoco_private *priv = container_of(notifier, + struct orinoco_private, + pm_notifier); + + /* All we need to do is cache the firmware before suspend, and + * release it when we come out. + * + * Only need to do this if we're downloading firmware. */ + if (!priv->do_fw_download) + return NOTIFY_DONE; + + switch (pm_event) { + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + orinoco_cache_fw(priv, 0); + break; + + case PM_POST_RESTORE: + /* Restore from hibernation failed. We need to clean + * up in exactly the same way, so fall through. */ + case PM_POST_HIBERNATION: + case PM_POST_SUSPEND: + orinoco_uncache_fw(priv); + break; + + case PM_RESTORE_PREPARE: + default: + break; + } + + return NOTIFY_DONE; +} + +static void orinoco_register_pm_notifier(struct orinoco_private *priv) +{ + priv->pm_notifier.notifier_call = orinoco_pm_notifier; + register_pm_notifier(&priv->pm_notifier); +} + +static void orinoco_unregister_pm_notifier(struct orinoco_private *priv) +{ + unregister_pm_notifier(&priv->pm_notifier); +} +#else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */ +#define orinoco_register_pm_notifier(priv) do { } while (0) +#define orinoco_unregister_pm_notifier(priv) do { } while (0) +#endif + +/********************************************************************/ +/* Initialization */ +/********************************************************************/ + +int orinoco_init(struct orinoco_private *priv) +{ + struct device *dev = priv->dev; + struct wiphy *wiphy = priv_to_wiphy(priv); + struct hermes *hw = &priv->hw; + int err = 0; + + /* No need to lock, the hw_unavailable flag is already set in + * alloc_orinocodev() */ + priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN; + + /* Initialize the firmware */ + err = hw->ops->init(hw); + if (err != 0) { + dev_err(dev, "Failed to initialize firmware (err = %d)\n", + err); + goto out; + } + + err = determine_fw_capabilities(priv, wiphy->fw_version, + sizeof(wiphy->fw_version), + &wiphy->hw_version); + if (err != 0) { + dev_err(dev, "Incompatible firmware, aborting\n"); + goto out; + } + + if (priv->do_fw_download) { +#ifdef CONFIG_HERMES_CACHE_FW_ON_INIT + orinoco_cache_fw(priv, 0); +#endif + + err = orinoco_download(priv); + if (err) + priv->do_fw_download = 0; + + /* Check firmware version again */ + err = determine_fw_capabilities(priv, wiphy->fw_version, + sizeof(wiphy->fw_version), + &wiphy->hw_version); + if (err != 0) { + dev_err(dev, "Incompatible firmware, aborting\n"); + goto out; + } + } + + if (priv->has_port3) + dev_info(dev, "Ad-hoc demo mode supported\n"); + if (priv->has_ibss) + dev_info(dev, "IEEE standard IBSS ad-hoc mode supported\n"); + if (priv->has_wep) + dev_info(dev, "WEP supported, %s-bit key\n", + priv->has_big_wep ? "104" : "40"); + if (priv->has_wpa) { + dev_info(dev, "WPA-PSK supported\n"); + if (orinoco_mic_init(priv)) { + dev_err(dev, "Failed to setup MIC crypto algorithm. " + "Disabling WPA support\n"); + priv->has_wpa = 0; + } + } + + err = orinoco_hw_read_card_settings(priv, wiphy->perm_addr); + if (err) + goto out; + + err = orinoco_hw_allocate_fid(priv); + if (err) { + dev_err(dev, "Failed to allocate NIC buffer!\n"); + goto out; + } + + /* Set up the default configuration */ + priv->iw_mode = NL80211_IFTYPE_STATION; + /* By default use IEEE/IBSS ad-hoc mode if we have it */ + priv->prefer_port3 = priv->has_port3 && (!priv->has_ibss); + set_port_type(priv); + priv->channel = 0; /* use firmware default */ + + priv->promiscuous = 0; + priv->encode_alg = ORINOCO_ALG_NONE; + priv->tx_key = 0; + priv->wpa_enabled = 0; + priv->tkip_cm_active = 0; + priv->key_mgmt = 0; + priv->wpa_ie_len = 0; + priv->wpa_ie = NULL; + + if (orinoco_wiphy_register(wiphy)) { + err = -ENODEV; + goto out; + } + + /* Make the hardware available, as long as it hasn't been + * removed elsewhere (e.g. by PCMCIA hot unplug) */ + orinoco_lock_irq(priv); + priv->hw_unavailable--; + orinoco_unlock_irq(priv); + + dev_dbg(dev, "Ready\n"); + + out: + return err; +} +EXPORT_SYMBOL(orinoco_init); + +static const struct net_device_ops orinoco_netdev_ops = { + .ndo_open = orinoco_open, + .ndo_stop = orinoco_stop, + .ndo_start_xmit = orinoco_xmit, + .ndo_set_rx_mode = orinoco_set_multicast_list, + .ndo_change_mtu = orinoco_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_tx_timeout = orinoco_tx_timeout, + .ndo_get_stats = orinoco_get_stats, +}; + +/* Allocate private data. + * + * This driver has a number of structures associated with it + * netdev - Net device structure for each network interface + * wiphy - structure associated with wireless phy + * wireless_dev (wdev) - structure for each wireless interface + * hw - structure for hermes chip info + * card - card specific structure for use by the card driver + * (airport, orinoco_cs) + * priv - orinoco private data + * device - generic linux device structure + * + * +---------+ +---------+ + * | wiphy | | netdev | + * | +-------+ | +-------+ + * | | priv | | | wdev | + * | | +-----+ +-+-------+ + * | | | hw | + * | +-+-----+ + * | | card | + * +-+-------+ + * + * priv has a link to netdev and device + * wdev has a link to wiphy + */ +struct orinoco_private +*alloc_orinocodev(int sizeof_card, + struct device *device, + int (*hard_reset)(struct orinoco_private *), + int (*stop_fw)(struct orinoco_private *, int)) +{ + struct orinoco_private *priv; + struct wiphy *wiphy; + + /* allocate wiphy + * NOTE: We only support a single virtual interface + * but this may change when monitor mode is added + */ + wiphy = wiphy_new(&orinoco_cfg_ops, + sizeof(struct orinoco_private) + sizeof_card); + if (!wiphy) + return NULL; + + priv = wiphy_priv(wiphy); + priv->dev = device; + + if (sizeof_card) + priv->card = (void *)((unsigned long)priv + + sizeof(struct orinoco_private)); + else + priv->card = NULL; + + orinoco_wiphy_init(wiphy); + +#ifdef WIRELESS_SPY + priv->wireless_data.spy_data = &priv->spy_data; +#endif + + /* Set up default callbacks */ + priv->hard_reset = hard_reset; + priv->stop_fw = stop_fw; + + spin_lock_init(&priv->lock); + priv->open = 0; + priv->hw_unavailable = 1; /* orinoco_init() must clear this + * before anything else touches the + * hardware */ + INIT_WORK(&priv->reset_work, orinoco_reset); + INIT_WORK(&priv->join_work, orinoco_join_ap); + INIT_WORK(&priv->wevent_work, orinoco_send_wevents); + + INIT_LIST_HEAD(&priv->rx_list); + tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet, + (unsigned long) priv); + + spin_lock_init(&priv->scan_lock); + INIT_LIST_HEAD(&priv->scan_list); + INIT_WORK(&priv->process_scan, orinoco_process_scan_results); + + priv->last_linkstatus = 0xffff; + +#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) + priv->cached_pri_fw = NULL; + priv->cached_fw = NULL; +#endif + + /* Register PM notifiers */ + orinoco_register_pm_notifier(priv); + + return priv; +} +EXPORT_SYMBOL(alloc_orinocodev); + +/* We can only support a single interface. We provide a separate + * function to set it up to distinguish between hardware + * initialisation and interface setup. + * + * The base_addr and irq parameters are passed on to netdev for use + * with SIOCGIFMAP. + */ +int orinoco_if_add(struct orinoco_private *priv, + unsigned long base_addr, + unsigned int irq, + const struct net_device_ops *ops) +{ + struct wiphy *wiphy = priv_to_wiphy(priv); + struct wireless_dev *wdev; + struct net_device *dev; + int ret; + + dev = alloc_etherdev(sizeof(struct wireless_dev)); + + if (!dev) + return -ENOMEM; + + /* Initialise wireless_dev */ + wdev = netdev_priv(dev); + wdev->wiphy = wiphy; + wdev->iftype = NL80211_IFTYPE_STATION; + + /* Setup / override net_device fields */ + dev->ieee80211_ptr = wdev; + dev->watchdog_timeo = HZ; /* 1 second timeout */ + dev->wireless_handlers = &orinoco_handler_def; +#ifdef WIRELESS_SPY + dev->wireless_data = &priv->wireless_data; +#endif + /* Default to standard ops if not set */ + if (ops) + dev->netdev_ops = ops; + else + dev->netdev_ops = &orinoco_netdev_ops; + + /* we use the default eth_mac_addr for setting the MAC addr */ + + /* Reserve space in skb for the SNAP header */ + dev->needed_headroom = ENCAPS_OVERHEAD; + + netif_carrier_off(dev); + + memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN); + + dev->base_addr = base_addr; + dev->irq = irq; + + SET_NETDEV_DEV(dev, priv->dev); + ret = register_netdev(dev); + if (ret) + goto fail; + + priv->ndev = dev; + + /* Report what we've done */ + dev_dbg(priv->dev, "Registerred interface %s.\n", dev->name); + + return 0; + + fail: + free_netdev(dev); + return ret; +} +EXPORT_SYMBOL(orinoco_if_add); + +void orinoco_if_del(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + + unregister_netdev(dev); + free_netdev(dev); +} +EXPORT_SYMBOL(orinoco_if_del); + +void free_orinocodev(struct orinoco_private *priv) +{ + struct wiphy *wiphy = priv_to_wiphy(priv); + struct orinoco_rx_data *rx_data, *temp; + struct orinoco_scan_data *sd, *sdtemp; + + /* If the tasklet is scheduled when we call tasklet_kill it + * will run one final time. However the tasklet will only + * drain priv->rx_list if the hw is still available. */ + tasklet_kill(&priv->rx_tasklet); + + /* Explicitly drain priv->rx_list */ + list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { + list_del(&rx_data->list); + + dev_kfree_skb(rx_data->skb); + kfree(rx_data->desc); + kfree(rx_data); + } + + cancel_work_sync(&priv->process_scan); + /* Explicitly drain priv->scan_list */ + list_for_each_entry_safe(sd, sdtemp, &priv->scan_list, list) { + list_del(&sd->list); + + if (sd->len > 0) + kfree(sd->buf); + kfree(sd); + } + + orinoco_unregister_pm_notifier(priv); + orinoco_uncache_fw(priv); + + priv->wpa_ie_len = 0; + kfree(priv->wpa_ie); + orinoco_mic_free(priv); + wiphy_free(wiphy); +} +EXPORT_SYMBOL(free_orinocodev); + +int orinoco_up(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + unsigned long flags; + int err; + + priv->hw.ops->lock_irqsave(&priv->lock, &flags); + + err = orinoco_reinit_firmware(priv); + if (err) { + printk(KERN_ERR "%s: Error %d re-initializing firmware\n", + dev->name, err); + goto exit; + } + + netif_device_attach(dev); + priv->hw_unavailable--; + + if (priv->open && !priv->hw_unavailable) { + err = __orinoco_up(priv); + if (err) + printk(KERN_ERR "%s: Error %d restarting card\n", + dev->name, err); + } + +exit: + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); + + return 0; +} +EXPORT_SYMBOL(orinoco_up); + +void orinoco_down(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + unsigned long flags; + int err; + + priv->hw.ops->lock_irqsave(&priv->lock, &flags); + err = __orinoco_down(priv); + if (err) + printk(KERN_WARNING "%s: Error %d downing interface\n", + dev->name, err); + + netif_device_detach(dev); + priv->hw_unavailable++; + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); +} +EXPORT_SYMBOL(orinoco_down); + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +/* Can't be declared "const" or the whole __initdata section will + * become const */ +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (David Gibson <hermes@gibson.dropbear.id.au>, " + "Pavel Roskin <proski@gnu.org>, et al)"; + +static int __init init_orinoco(void) +{ + printk(KERN_DEBUG "%s\n", version); + return 0; +} + +static void __exit exit_orinoco(void) +{ +} + +module_init(init_orinoco); +module_exit(exit_orinoco); diff --git a/drivers/net/wireless/intersil/orinoco/main.h b/drivers/net/wireless/intersil/orinoco/main.h new file mode 100644 index 000000000..5a8fec261 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/main.h @@ -0,0 +1,50 @@ +/* Exports from main to helper modules + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_MAIN_H_ +#define _ORINOCO_MAIN_H_ + +#include <linux/ieee80211.h> +#include "orinoco.h" + +/********************************************************************/ +/* Compile time configuration and compatibility stuff */ +/********************************************************************/ + +/* We do this this way to avoid ifdefs in the actual code */ +#ifdef WIRELESS_SPY +#define SPY_NUMBER(priv) (priv->spy_data.spy_number) +#else +#define SPY_NUMBER(priv) 0 +#endif /* WIRELESS_SPY */ + +/********************************************************************/ + +/* Export module parameter */ +extern int force_monitor; + +/* Forward declarations */ +struct net_device; +struct work_struct; + +void set_port_type(struct orinoco_private *priv); +int orinoco_commit(struct orinoco_private *priv); +void orinoco_reset(struct work_struct *work); + +/* Information element helpers - find a home for these... */ +#define WPA_OUI_TYPE "\x00\x50\xF2\x01" +#define WPA_SELECTOR_LEN 4 +static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len) +{ + u8 *p = data; + while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) { + if ((p[0] == WLAN_EID_VENDOR_SPECIFIC) && + (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0)) + return p; + p += p[1] + 2; + } + return NULL; +} + +#endif /* _ORINOCO_MAIN_H_ */ diff --git a/drivers/net/wireless/intersil/orinoco/mic.c b/drivers/net/wireless/intersil/orinoco/mic.c new file mode 100644 index 000000000..fce4a843e --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/mic.c @@ -0,0 +1,79 @@ +/* Orinoco MIC helpers + * + * See copyright notice in main.c + */ +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/if_ether.h> +#include <linux/scatterlist.h> +#include <linux/crypto.h> + +#include "orinoco.h" +#include "mic.h" + +/********************************************************************/ +/* Michael MIC crypto setup */ +/********************************************************************/ +int orinoco_mic_init(struct orinoco_private *priv) +{ + priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); + if (IS_ERR(priv->tx_tfm_mic)) { + printk(KERN_DEBUG "orinoco_mic_init: could not allocate " + "crypto API michael_mic\n"); + priv->tx_tfm_mic = NULL; + return -ENOMEM; + } + + priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); + if (IS_ERR(priv->rx_tfm_mic)) { + printk(KERN_DEBUG "orinoco_mic_init: could not allocate " + "crypto API michael_mic\n"); + priv->rx_tfm_mic = NULL; + return -ENOMEM; + } + + return 0; +} + +void orinoco_mic_free(struct orinoco_private *priv) +{ + if (priv->tx_tfm_mic) + crypto_free_hash(priv->tx_tfm_mic); + if (priv->rx_tfm_mic) + crypto_free_hash(priv->rx_tfm_mic); +} + +int orinoco_mic(struct crypto_hash *tfm_michael, u8 *key, + u8 *da, u8 *sa, u8 priority, + u8 *data, size_t data_len, u8 *mic) +{ + struct hash_desc desc; + struct scatterlist sg[2]; + u8 hdr[ETH_HLEN + 2]; /* size of header + padding */ + + if (tfm_michael == NULL) { + printk(KERN_WARNING "orinoco_mic: tfm_michael == NULL\n"); + return -1; + } + + /* Copy header into buffer. We need the padding on the end zeroed */ + memcpy(&hdr[0], da, ETH_ALEN); + memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN); + hdr[ETH_ALEN * 2] = priority; + hdr[ETH_ALEN * 2 + 1] = 0; + hdr[ETH_ALEN * 2 + 2] = 0; + hdr[ETH_ALEN * 2 + 3] = 0; + + /* Use scatter gather to MIC header and data in one go */ + sg_init_table(sg, 2); + sg_set_buf(&sg[0], hdr, sizeof(hdr)); + sg_set_buf(&sg[1], data, data_len); + + if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN)) + return -1; + + desc.tfm = tfm_michael; + desc.flags = 0; + return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr), + mic); +} diff --git a/drivers/net/wireless/intersil/orinoco/mic.h b/drivers/net/wireless/intersil/orinoco/mic.h new file mode 100644 index 000000000..04d05bc56 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/mic.h @@ -0,0 +1,22 @@ +/* Orinoco MIC helpers + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_MIC_H_ +#define _ORINOCO_MIC_H_ + +#include <linux/types.h> + +#define MICHAEL_MIC_LEN 8 + +/* Forward declarations */ +struct orinoco_private; +struct crypto_hash; + +int orinoco_mic_init(struct orinoco_private *priv); +void orinoco_mic_free(struct orinoco_private *priv); +int orinoco_mic(struct crypto_hash *tfm_michael, u8 *key, + u8 *da, u8 *sa, u8 priority, + u8 *data, size_t data_len, u8 *mic); + +#endif /* ORINOCO_MIC_H */ diff --git a/drivers/net/wireless/intersil/orinoco/orinoco.h b/drivers/net/wireless/intersil/orinoco/orinoco.h new file mode 100644 index 000000000..eebd2be21 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/orinoco.h @@ -0,0 +1,253 @@ +/* orinoco.h + * + * Common definitions to all pieces of the various orinoco + * drivers + */ + +#ifndef _ORINOCO_H +#define _ORINOCO_H + +#define DRIVER_VERSION "0.15" + +#include <linux/interrupt.h> +#include <linux/suspend.h> +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> +#include <net/cfg80211.h> + +#include "hermes.h" + +/* To enable debug messages */ +/*#define ORINOCO_DEBUG 3*/ + +#define WIRELESS_SPY /* enable iwspy support */ + +#define MAX_SCAN_LEN 4096 + +#define ORINOCO_SEQ_LEN 8 +#define ORINOCO_MAX_KEY_SIZE 14 +#define ORINOCO_MAX_KEYS 4 + +struct orinoco_key { + __le16 len; /* always stored as little-endian */ + char data[ORINOCO_MAX_KEY_SIZE]; +} __packed; + +#define TKIP_KEYLEN 16 +#define MIC_KEYLEN 8 + +struct orinoco_tkip_key { + u8 tkip[TKIP_KEYLEN]; + u8 tx_mic[MIC_KEYLEN]; + u8 rx_mic[MIC_KEYLEN]; +}; + +enum orinoco_alg { + ORINOCO_ALG_NONE, + ORINOCO_ALG_WEP, + ORINOCO_ALG_TKIP +}; + +enum fwtype { + FIRMWARE_TYPE_AGERE, + FIRMWARE_TYPE_INTERSIL, + FIRMWARE_TYPE_SYMBOL +}; + +struct firmware; + +struct orinoco_private { + void *card; /* Pointer to card dependent structure */ + struct device *dev; + int (*hard_reset)(struct orinoco_private *); + int (*stop_fw)(struct orinoco_private *, int); + + struct ieee80211_supported_band band; + struct ieee80211_channel channels[14]; + u32 cipher_suites[3]; + + /* Synchronisation stuff */ + spinlock_t lock; + int hw_unavailable; + struct work_struct reset_work; + + /* Interrupt tasklets */ + struct tasklet_struct rx_tasklet; + struct list_head rx_list; + + /* driver state */ + int open; + u16 last_linkstatus; + struct work_struct join_work; + struct work_struct wevent_work; + + /* Net device stuff */ + struct net_device *ndev; + struct net_device_stats stats; + struct iw_statistics wstats; + + /* Hardware control variables */ + struct hermes hw; + u16 txfid; + + /* Capabilities of the hardware/firmware */ + enum fwtype firmware_type; + int ibss_port; + int nicbuf_size; + u16 channel_mask; + + /* Boolean capabilities */ + unsigned int has_ibss:1; + unsigned int has_port3:1; + unsigned int has_wep:1; + unsigned int has_big_wep:1; + unsigned int has_mwo:1; + unsigned int has_pm:1; + unsigned int has_preamble:1; + unsigned int has_sensitivity:1; + unsigned int has_hostscan:1; + unsigned int has_alt_txcntl:1; + unsigned int has_ext_scan:1; + unsigned int has_wpa:1; + unsigned int do_fw_download:1; + unsigned int broken_disableport:1; + unsigned int broken_monitor:1; + unsigned int prefer_port3:1; + + /* Configuration paramaters */ + enum nl80211_iftype iw_mode; + enum orinoco_alg encode_alg; + u16 wep_restrict, tx_key; + struct key_params keys[ORINOCO_MAX_KEYS]; + + int bitratemode; + char nick[IW_ESSID_MAX_SIZE + 1]; + char desired_essid[IW_ESSID_MAX_SIZE + 1]; + char desired_bssid[ETH_ALEN]; + int bssid_fixed; + u16 frag_thresh, mwo_robust; + u16 channel; + u16 ap_density, rts_thresh; + u16 pm_on, pm_mcast, pm_period, pm_timeout; + u16 preamble; + u16 short_retry_limit, long_retry_limit; + u16 retry_lifetime; +#ifdef WIRELESS_SPY + struct iw_spy_data spy_data; /* iwspy support */ + struct iw_public_data wireless_data; +#endif + + /* Configuration dependent variables */ + int port_type, createibss; + int promiscuous, mc_count; + + /* Scanning support */ + struct cfg80211_scan_request *scan_request; + struct work_struct process_scan; + struct list_head scan_list; + spinlock_t scan_lock; /* protects the scan list */ + + /* WPA support */ + u8 *wpa_ie; + int wpa_ie_len; + + struct crypto_hash *rx_tfm_mic; + struct crypto_hash *tx_tfm_mic; + + unsigned int wpa_enabled:1; + unsigned int tkip_cm_active:1; + unsigned int key_mgmt:3; + +#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) + /* Cached in memory firmware to use during ->resume. */ + const struct firmware *cached_pri_fw; + const struct firmware *cached_fw; +#endif + + struct notifier_block pm_notifier; +}; + +#ifdef ORINOCO_DEBUG +extern int orinoco_debug; +#define DEBUG(n, args...) do { \ + if (orinoco_debug > (n)) \ + printk(KERN_DEBUG args); \ +} while (0) +#else +#define DEBUG(n, args...) do { } while (0) +#endif /* ORINOCO_DEBUG */ + +/********************************************************************/ +/* Exported prototypes */ +/********************************************************************/ + +struct orinoco_private *alloc_orinocodev(int sizeof_card, struct device *device, + int (*hard_reset)(struct orinoco_private *), + int (*stop_fw)(struct orinoco_private *, int)); +void free_orinocodev(struct orinoco_private *priv); +int orinoco_init(struct orinoco_private *priv); +int orinoco_if_add(struct orinoco_private *priv, unsigned long base_addr, + unsigned int irq, const struct net_device_ops *ops); +void orinoco_if_del(struct orinoco_private *priv); +int orinoco_up(struct orinoco_private *priv); +void orinoco_down(struct orinoco_private *priv); +irqreturn_t orinoco_interrupt(int irq, void *dev_id); + +void __orinoco_ev_info(struct net_device *dev, struct hermes *hw); +void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw); + +int orinoco_process_xmit_skb(struct sk_buff *skb, + struct net_device *dev, + struct orinoco_private *priv, + int *tx_control, + u8 *mic); + +/* Common ndo functions exported for reuse by orinoco_usb */ +int orinoco_open(struct net_device *dev); +int orinoco_stop(struct net_device *dev); +struct net_device_stats *orinoco_get_stats(struct net_device *dev); +void orinoco_set_multicast_list(struct net_device *dev); +int orinoco_change_mtu(struct net_device *dev, int new_mtu); +void orinoco_tx_timeout(struct net_device *dev); + +/********************************************************************/ +/* Locking and synchronization functions */ +/********************************************************************/ + +static inline int orinoco_lock(struct orinoco_private *priv, + unsigned long *flags) +{ + priv->hw.ops->lock_irqsave(&priv->lock, flags); + if (priv->hw_unavailable) { + DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n", + priv->ndev); + priv->hw.ops->unlock_irqrestore(&priv->lock, flags); + return -EBUSY; + } + return 0; +} + +static inline void orinoco_unlock(struct orinoco_private *priv, + unsigned long *flags) +{ + priv->hw.ops->unlock_irqrestore(&priv->lock, flags); +} + +static inline void orinoco_lock_irq(struct orinoco_private *priv) +{ + priv->hw.ops->lock_irq(&priv->lock); +} + +static inline void orinoco_unlock_irq(struct orinoco_private *priv) +{ + priv->hw.ops->unlock_irq(&priv->lock); +} + +/*** Navigate from net_device to orinoco_private ***/ +static inline struct orinoco_private *ndev_priv(struct net_device *dev) +{ + struct wireless_dev *wdev = netdev_priv(dev); + return wdev_priv(wdev); +} +#endif /* _ORINOCO_H */ diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_cs.c b/drivers/net/wireless/intersil/orinoco/orinoco_cs.c new file mode 100644 index 000000000..a956f965a --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/orinoco_cs.c @@ -0,0 +1,341 @@ +/* orinoco_cs.c (formerly known as dldwd_cs.c) + * + * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such + * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ + * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others). + * It should also be usable on various Prism II based cards such as the + * Linksys, D-Link and Farallon Skyline. It should also work on Symbol + * cards such as the 3Com AirConnect and Ericsson WLAN. + * + * Copyright notice & release notes in file main.c + */ + +#define DRIVER_NAME "orinoco_cs" +#define PFX DRIVER_NAME ": " + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> + +#include "orinoco.h" + +/********************************************************************/ +/* Module stuff */ +/********************************************************************/ + +MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>"); +MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco," + " Prism II based and similar wireless cards"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* Module parameters */ + +/* Some D-Link cards have buggy CIS. They do work at 5v properly, but + * don't have any CIS entry for it. This workaround it... */ +static int ignore_cis_vcc; /* = 0 */ +module_param(ignore_cis_vcc, int, 0); +MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); + +/********************************************************************/ +/* Data structures */ +/********************************************************************/ + +/* PCMCIA specific device information (goes in the card field of + * struct orinoco_private */ +struct orinoco_pccard { + struct pcmcia_device *p_dev; + + /* Used to handle hard reset */ + /* yuck, we need this hack to work around the insanity of the + * PCMCIA layer */ + unsigned long hard_reset_in_progress; +}; + + +/********************************************************************/ +/* Function prototypes */ +/********************************************************************/ + +static int orinoco_cs_config(struct pcmcia_device *link); +static void orinoco_cs_release(struct pcmcia_device *link); +static void orinoco_cs_detach(struct pcmcia_device *p_dev); + +/********************************************************************/ +/* Device methods */ +/********************************************************************/ + +static int +orinoco_cs_hard_reset(struct orinoco_private *priv) +{ + struct orinoco_pccard *card = priv->card; + struct pcmcia_device *link = card->p_dev; + int err; + + /* We need atomic ops here, because we're not holding the lock */ + set_bit(0, &card->hard_reset_in_progress); + + err = pcmcia_reset_card(link->socket); + if (err) + return err; + + msleep(100); + clear_bit(0, &card->hard_reset_in_progress); + + return 0; +} + +/********************************************************************/ +/* PCMCIA stuff */ +/********************************************************************/ + +static int +orinoco_cs_probe(struct pcmcia_device *link) +{ + struct orinoco_private *priv; + struct orinoco_pccard *card; + + priv = alloc_orinocodev(sizeof(*card), &link->dev, + orinoco_cs_hard_reset, NULL); + if (!priv) + return -ENOMEM; + card = priv->card; + + /* Link both structures together */ + card->p_dev = link; + link->priv = priv; + + return orinoco_cs_config(link); +} /* orinoco_cs_attach */ + +static void orinoco_cs_detach(struct pcmcia_device *link) +{ + struct orinoco_private *priv = link->priv; + + orinoco_if_del(priv); + + orinoco_cs_release(link); + + wiphy_unregister(priv_to_wiphy(priv)); + free_orinocodev(priv); +} /* orinoco_cs_detach */ + +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + if (p_dev->config_index == 0) + return -EINVAL; + + return pcmcia_request_io(p_dev); +}; + +static int +orinoco_cs_config(struct pcmcia_device *link) +{ + struct orinoco_private *priv = link->priv; + struct hermes *hw = &priv->hw; + int ret; + void __iomem *mem; + + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; + ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); + if (ret) { + if (!ignore_cis_vcc) + printk(KERN_ERR PFX "GetNextTuple(): No matching " + "CIS configuration. Maybe you need the " + "ignore_cis_vcc=1 parameter.\n"); + goto failed; + } + + mem = ioport_map(link->resource[0]->start, + resource_size(link->resource[0])); + if (!mem) + goto failed; + + /* We initialize the hermes structure before completing PCMCIA + * configuration just in case the interrupt handler gets + * called. */ + hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); + + ret = pcmcia_request_irq(link, orinoco_interrupt); + if (ret) + goto failed; + + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + /* Initialise the main driver */ + if (orinoco_init(priv) != 0) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); + goto failed; + } + + /* Register an interface with the stack */ + if (orinoco_if_add(priv, link->resource[0]->start, + link->irq, NULL) != 0) { + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); + goto failed; + } + + return 0; + + failed: + orinoco_cs_release(link); + return -ENODEV; +} /* orinoco_cs_config */ + +static void +orinoco_cs_release(struct pcmcia_device *link) +{ + struct orinoco_private *priv = link->priv; + unsigned long flags; + + /* We're committed to taking the device away now, so mark the + * hardware as unavailable */ + priv->hw.ops->lock_irqsave(&priv->lock, &flags); + priv->hw_unavailable++; + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); + + pcmcia_disable_device(link); + if (priv->hw.iobase) + ioport_unmap(priv->hw.iobase); +} /* orinoco_cs_release */ + +static int orinoco_cs_suspend(struct pcmcia_device *link) +{ + struct orinoco_private *priv = link->priv; + struct orinoco_pccard *card = priv->card; + + /* This is probably racy, but I can't think of + a better way, short of rewriting the PCMCIA + layer to not suck :-( */ + if (!test_bit(0, &card->hard_reset_in_progress)) + orinoco_down(priv); + + return 0; +} + +static int orinoco_cs_resume(struct pcmcia_device *link) +{ + struct orinoco_private *priv = link->priv; + struct orinoco_pccard *card = priv->card; + int err = 0; + + if (!test_bit(0, &card->hard_reset_in_progress)) + err = orinoco_up(priv); + + return err; +} + + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +static const struct pcmcia_device_id orinoco_cs_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ + PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */ + PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */ + PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */ + PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */ + PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */ + PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */ + PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */ + PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), + PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f), + PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), + PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), + PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169), + PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb), + PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), + PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916), + PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3), + PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c), + PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077), + PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92), + PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), + PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410), + PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3), + PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a), + PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), + PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed), + PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9), + PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26), + PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b), + PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), + PCMCIA_DEVICE_MANF_CARD_PROD_ID3(0x0156, 0x0002, "Version 01.01", 0xd27deb1a), /* Lucent Orinoco */ +#ifdef CONFIG_HERMES_PRISM + /* Only entries that certainly identify Prism chipset */ + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */ + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */ + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */ + PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */ + PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */ + PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */ + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */ + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */ + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */ + PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */ + PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */ + PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */ + PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */ + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */ + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */ + PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5), + PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2), + PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18), + PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3), + PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b), + PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), + PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), + PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae), + PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146), + PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac), + PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab), + PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9), + PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), + PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77), + PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf), + PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395), + PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01), + PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1), + PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1), + PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6), + PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264), + PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), + PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757), + PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a), + PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), + PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092), + PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2), + PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b), + PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39), + + /* This may be Agere or Intersil Firmware */ + PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), +#endif + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); + +static struct pcmcia_driver orinoco_driver = { + .owner = THIS_MODULE, + .name = DRIVER_NAME, + .probe = orinoco_cs_probe, + .remove = orinoco_cs_detach, + .id_table = orinoco_cs_ids, + .suspend = orinoco_cs_suspend, + .resume = orinoco_cs_resume, +}; +module_pcmcia_driver(orinoco_driver); diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c b/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c new file mode 100644 index 000000000..048693b6c --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c @@ -0,0 +1,323 @@ +/* orinoco_nortel.c + * + * Driver for Prism II devices which would usually be driven by orinoco_cs, + * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in + * Nortel emobility, Symbol LA-4113 and Symbol LA-4123. + * + * Copyright (C) 2002 Tobias Hoffmann + * (C) 2003 Christoph Jungegger <disdos@traum404.de> + * + * Some of this code is borrowed from orinoco_plx.c + * Copyright (C) 2001 Daniel Barlow + * Some of this code is borrowed from orinoco_pci.c + * Copyright (C) 2001 Jean Tourrilhes + * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing + * has been copied from it. linux-wlan-ng-0.1.10 is originally : + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#define DRIVER_NAME "orinoco_nortel" +#define PFX DRIVER_NAME ": " + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <pcmcia/cisreg.h> + +#include "orinoco.h" +#include "orinoco_pci.h" + +#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */ +#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ + + +/* + * Do a soft reset of the card using the Configuration Option Register + * We need this to get going... + * This is the part of the code that is strongly inspired from wlan-ng + * + * Note bis : Don't try to access HERMES_CMD during the reset phase. + * It just won't work ! + */ +static int orinoco_nortel_cor_reset(struct orinoco_private *priv) +{ + struct orinoco_pci_card *card = priv->card; + + /* Assert the reset until the card notices */ + iowrite16(8, card->bridge_io + 2); + ioread16(card->attr_io + COR_OFFSET); + iowrite16(0x80, card->attr_io + COR_OFFSET); + mdelay(1); + + /* Give time for the card to recover from this hard effort */ + iowrite16(0, card->attr_io + COR_OFFSET); + iowrite16(0, card->attr_io + COR_OFFSET); + mdelay(1); + + /* Set COR as usual */ + iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); + iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); + mdelay(1); + + iowrite16(0x228, card->bridge_io + 2); + + return 0; +} + +static int orinoco_nortel_hw_init(struct orinoco_pci_card *card) +{ + int i; + u32 reg; + + /* Setup bridge */ + if (ioread16(card->bridge_io) & 1) { + printk(KERN_ERR PFX "brg1 answer1 wrong\n"); + return -EBUSY; + } + iowrite16(0x118, card->bridge_io + 2); + iowrite16(0x108, card->bridge_io + 2); + mdelay(30); + iowrite16(0x8, card->bridge_io + 2); + for (i = 0; i < 30; i++) { + mdelay(30); + if (ioread16(card->bridge_io) & 0x10) + break; + } + if (i == 30) { + printk(KERN_ERR PFX "brg1 timed out\n"); + return -EBUSY; + } + if (ioread16(card->attr_io + COR_OFFSET) & 1) { + printk(KERN_ERR PFX "brg2 answer1 wrong\n"); + return -EBUSY; + } + if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) { + printk(KERN_ERR PFX "brg2 answer2 wrong\n"); + return -EBUSY; + } + if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) { + printk(KERN_ERR PFX "brg2 answer3 wrong\n"); + return -EBUSY; + } + + /* Set the PCMCIA COR register */ + iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); + mdelay(1); + reg = ioread16(card->attr_io + COR_OFFSET); + if (reg != COR_VALUE) { + printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", + reg); + return -EBUSY; + } + + /* Set LEDs */ + iowrite16(1, card->bridge_io + 10); + return 0; +} + +static int orinoco_nortel_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err; + struct orinoco_private *priv; + struct orinoco_pci_card *card; + void __iomem *hermes_io, *bridge_io, *attr_io; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + bridge_io = pci_iomap(pdev, 0, 0); + if (!bridge_io) { + printk(KERN_ERR PFX "Cannot map bridge registers\n"); + err = -EIO; + goto fail_map_bridge; + } + + attr_io = pci_iomap(pdev, 1, 0); + if (!attr_io) { + printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); + err = -EIO; + goto fail_map_attr; + } + + hermes_io = pci_iomap(pdev, 2, 0); + if (!hermes_io) { + printk(KERN_ERR PFX "Cannot map chipset registers\n"); + err = -EIO; + goto fail_map_hermes; + } + + /* Allocate network device */ + priv = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_nortel_cor_reset, NULL); + if (!priv) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + err = -ENOMEM; + goto fail_alloc; + } + + card = priv->card; + card->bridge_io = bridge_io; + card->attr_io = attr_io; + + hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); + + err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, + DRIVER_NAME, priv); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + + err = orinoco_nortel_hw_init(card); + if (err) { + printk(KERN_ERR PFX "Hardware initialization failed\n"); + goto fail; + } + + err = orinoco_nortel_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + err = orinoco_init(priv); + if (err) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); + goto fail; + } + + err = orinoco_if_add(priv, 0, 0, NULL); + if (err) { + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); + goto fail_wiphy; + } + + pci_set_drvdata(pdev, priv); + + return 0; + + fail_wiphy: + wiphy_unregister(priv_to_wiphy(priv)); + fail: + free_irq(pdev->irq, priv); + + fail_irq: + free_orinocodev(priv); + + fail_alloc: + pci_iounmap(pdev, hermes_io); + + fail_map_hermes: + pci_iounmap(pdev, attr_io); + + fail_map_attr: + pci_iounmap(pdev, bridge_io); + + fail_map_bridge: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void orinoco_nortel_remove_one(struct pci_dev *pdev) +{ + struct orinoco_private *priv = pci_get_drvdata(pdev); + struct orinoco_pci_card *card = priv->card; + + /* Clear LEDs */ + iowrite16(0, card->bridge_io + 10); + + orinoco_if_del(priv); + wiphy_unregister(priv_to_wiphy(priv)); + free_irq(pdev->irq, priv); + free_orinocodev(priv); + pci_iounmap(pdev, priv->hw.iobase); + pci_iounmap(pdev, card->attr_io); + pci_iounmap(pdev, card->bridge_io); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static const struct pci_device_id orinoco_nortel_id_table[] = { + /* Nortel emobility PCI */ + {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,}, + /* Symbol LA-4123 PCI */ + {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,}, + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table); + +static struct pci_driver orinoco_nortel_driver = { + .name = DRIVER_NAME, + .id_table = orinoco_nortel_id_table, + .probe = orinoco_nortel_init_one, + .remove = orinoco_nortel_remove_one, + .suspend = orinoco_pci_suspend, + .resume = orinoco_pci_resume, +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)"; +MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>"); +MODULE_DESCRIPTION("Driver for wireless LAN cards using the Nortel PCI bridge"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init orinoco_nortel_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_register_driver(&orinoco_nortel_driver); +} + +static void __exit orinoco_nortel_exit(void) +{ + pci_unregister_driver(&orinoco_nortel_driver); +} + +module_init(orinoco_nortel_init); +module_exit(orinoco_nortel_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_pci.c b/drivers/net/wireless/intersil/orinoco/orinoco_pci.c new file mode 100644 index 000000000..4938a2208 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/orinoco_pci.c @@ -0,0 +1,266 @@ +/* orinoco_pci.c + * + * Driver for Prism 2.5/3 devices that have a direct PCI interface + * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge). + * The card contains only one PCI region, which contains all the usual + * hermes registers, as well as the COR register. + * + * Current maintainers are: + * Pavel Roskin <proski AT gnu.org> + * and David Gibson <hermes AT gibson.dropbear.id.au> + * + * Some of this code is borrowed from orinoco_plx.c + * Copyright (C) 2001 Daniel Barlow <dan AT telent.net> + * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing + * has been copied from it. linux-wlan-ng-0.1.10 is originally : + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * This file originally written by: + * Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com> + * And is now maintained by: + * (C) Copyright David Gibson, IBM Corp. 2002-2003. + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#define DRIVER_NAME "orinoco_pci" +#define PFX DRIVER_NAME ": " + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include "orinoco.h" +#include "orinoco_pci.h" + +/* Offset of the COR register of the PCI card */ +#define HERMES_PCI_COR (0x26) + +/* Bitmask to reset the card */ +#define HERMES_PCI_COR_MASK (0x0080) + +/* Magic timeouts for doing the reset. + * Those times are straight from wlan-ng, and it is claimed that they + * are necessary. Alan will kill me. Take your time and grab a coffee. */ +#define HERMES_PCI_COR_ONT (250) /* ms */ +#define HERMES_PCI_COR_OFFT (500) /* ms */ +#define HERMES_PCI_COR_BUSYT (500) /* ms */ + +/* + * Do a soft reset of the card using the Configuration Option Register + * We need this to get going... + * This is the part of the code that is strongly inspired from wlan-ng + * + * Note : This code is done with irq enabled. This mean that many + * interrupts will occur while we are there. This is why we use the + * jiffies to regulate time instead of a straight mdelay(). Usually we + * need only around 245 iteration of the loop to do 250 ms delay. + * + * Note bis : Don't try to access HERMES_CMD during the reset phase. + * It just won't work ! + */ +static int orinoco_pci_cor_reset(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + unsigned long timeout; + u16 reg; + + /* Assert the reset until the card notices */ + hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK); + mdelay(HERMES_PCI_COR_ONT); + + /* Give time for the card to recover from this hard effort */ + hermes_write_regn(hw, PCI_COR, 0x0000); + mdelay(HERMES_PCI_COR_OFFT); + + /* The card is ready when it's no longer busy */ + timeout = jiffies + msecs_to_jiffies(HERMES_PCI_COR_BUSYT); + reg = hermes_read_regn(hw, CMD); + while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { + mdelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* Still busy? */ + if (reg & HERMES_CMD_BUSY) { + printk(KERN_ERR PFX "Busy timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int orinoco_pci_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err; + struct orinoco_private *priv; + struct orinoco_pci_card *card; + void __iomem *hermes_io; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + hermes_io = pci_iomap(pdev, 0, 0); + if (!hermes_io) { + printk(KERN_ERR PFX "Cannot remap chipset registers\n"); + err = -EIO; + goto fail_map_hermes; + } + + /* Allocate network device */ + priv = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_pci_cor_reset, NULL); + if (!priv) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + err = -ENOMEM; + goto fail_alloc; + } + + card = priv->card; + + hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING); + + err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, + DRIVER_NAME, priv); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + + err = orinoco_pci_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + err = orinoco_init(priv); + if (err) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); + goto fail; + } + + err = orinoco_if_add(priv, 0, 0, NULL); + if (err) { + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); + goto fail_wiphy; + } + + pci_set_drvdata(pdev, priv); + + return 0; + + fail_wiphy: + wiphy_unregister(priv_to_wiphy(priv)); + fail: + free_irq(pdev->irq, priv); + + fail_irq: + free_orinocodev(priv); + + fail_alloc: + pci_iounmap(pdev, hermes_io); + + fail_map_hermes: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void orinoco_pci_remove_one(struct pci_dev *pdev) +{ + struct orinoco_private *priv = pci_get_drvdata(pdev); + + orinoco_if_del(priv); + wiphy_unregister(priv_to_wiphy(priv)); + free_irq(pdev->irq, priv); + free_orinocodev(priv); + pci_iounmap(pdev, priv->hw.iobase); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static const struct pci_device_id orinoco_pci_id_table[] = { + /* Intersil Prism 3 */ + {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,}, + /* Intersil Prism 2.5 */ + {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,}, + /* Samsung MagicLAN SWL-2210P */ + {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,}, + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table); + +static struct pci_driver orinoco_pci_driver = { + .name = DRIVER_NAME, + .id_table = orinoco_pci_id_table, + .probe = orinoco_pci_init_one, + .remove = orinoco_pci_remove_one, + .suspend = orinoco_pci_suspend, + .resume = orinoco_pci_resume, +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Pavel Roskin <proski@gnu.org>," + " David Gibson <hermes@gibson.dropbear.id.au> &" + " Jean Tourrilhes <jt@hpl.hp.com>)"; +MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> &" + " David Gibson <hermes@gibson.dropbear.id.au>"); +MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init orinoco_pci_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_register_driver(&orinoco_pci_driver); +} + +static void __exit orinoco_pci_exit(void) +{ + pci_unregister_driver(&orinoco_pci_driver); +} + +module_init(orinoco_pci_init); +module_exit(orinoco_pci_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_pci.h b/drivers/net/wireless/intersil/orinoco/orinoco_pci.h new file mode 100644 index 000000000..43f5b9f5a --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/orinoco_pci.h @@ -0,0 +1,68 @@ +/* orinoco_pci.h + * + * Common code for all Orinoco drivers for PCI devices, including + * both native PCI and PCMCIA-to-PCI bridges. + * + * Copyright (C) 2005, Pavel Roskin. + * See main.c for license. + */ + +#ifndef _ORINOCO_PCI_H +#define _ORINOCO_PCI_H + +#include <linux/netdevice.h> + +/* Driver specific data */ +struct orinoco_pci_card { + void __iomem *bridge_io; + void __iomem *attr_io; +}; + +#ifdef CONFIG_PM +static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct orinoco_private *priv = pci_get_drvdata(pdev); + + orinoco_down(priv); + free_irq(pdev->irq, priv); + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int orinoco_pci_resume(struct pci_dev *pdev) +{ + struct orinoco_private *priv = pci_get_drvdata(pdev); + struct net_device *dev = priv->ndev; + int err; + + pci_set_power_state(pdev, PCI_D0); + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s: pci_enable_device failed on resume\n", + dev->name); + return err; + } + pci_restore_state(pdev); + + err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, + dev->name, priv); + if (err) { + printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n", + dev->name); + pci_disable_device(pdev); + return -EBUSY; + } + + err = orinoco_up(priv); + + return err; +} +#else +#define orinoco_pci_suspend NULL +#define orinoco_pci_resume NULL +#endif + +#endif /* _ORINOCO_PCI_H */ diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_plx.c b/drivers/net/wireless/intersil/orinoco/orinoco_plx.c new file mode 100644 index 000000000..221352027 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/orinoco_plx.c @@ -0,0 +1,371 @@ +/* orinoco_plx.c + * + * Driver for Prism II devices which would usually be driven by orinoco_cs, + * but are connected to the PCI bus by a PLX9052. + * + * Current maintainers are: + * Pavel Roskin <proski AT gnu.org> + * and David Gibson <hermes AT gibson.dropbear.id.au> + * + * (C) Copyright David Gibson, IBM Corp. 2001-2003. + * Copyright (C) 2001 Daniel Barlow + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + * + * Here's the general details on how the PLX9052 adapter works: + * + * - Two PCI I/O address spaces, one 0x80 long which contains the + * PLX9052 registers, and one that's 0x40 long mapped to the PCMCIA + * slot I/O address space. + * + * - One PCI memory address space, mapped to the PCMCIA attribute space + * (containing the CIS). + * + * Using the later, you can read through the CIS data to make sure the + * card is compatible with the driver. Keep in mind that the PCMCIA + * spec specifies the CIS as the lower 8 bits of each word read from + * the CIS, so to read the bytes of the CIS, read every other byte + * (0,2,4,...). Passing that test, you need to enable the I/O address + * space on the PCMCIA card via the PCMCIA COR register. This is the + * first byte following the CIS. In my case (which may not have any + * relation to what's on the PRISM2 cards), COR was at offset 0x800 + * within the PCI memory space. Write 0x41 to the COR register to + * enable I/O mode and to select level triggered interrupts. To + * confirm you actually succeeded, read the COR register back and make + * sure it actually got set to 0x41, in case you have an unexpected + * card inserted. + * + * Following that, you can treat the second PCI I/O address space (the + * one that's not 0x80 in length) as the PCMCIA I/O space. + * + * Note that in the Eumitcom's source for their drivers, they register + * the interrupt as edge triggered when registering it with the + * Windows kernel. I don't recall how to register edge triggered on + * Linux (if it can be done at all). But in some experimentation, I + * don't see much operational difference between using either + * interrupt mode. Don't mess with the interrupt mode in the COR + * register though, as the PLX9052 wants level triggers with the way + * the serial EEPROM configures it on the WL11000. + * + * There's some other little quirks related to timing that I bumped + * into, but I don't recall right now. Also, there's two variants of + * the WL11000 I've seen, revision A1 and T2. These seem to differ + * slightly in the timings configured in the wait-state generator in + * the PLX9052. There have also been some comments from Eumitcom that + * cards shouldn't be hot swapped, apparently due to risk of cooking + * the PLX9052. I'm unsure why they believe this, as I can't see + * anything in the design that would really cause a problem, except + * for crashing drivers not written to expect it. And having developed + * drivers for the WL11000, I'd say it's quite tricky to write code + * that will successfully deal with a hot unplug. Very odd things + * happen on the I/O side of things. But anyway, be warned. Despite + * that, I've hot-swapped a number of times during debugging and + * driver development for various reasons (stuck WAIT# line after the + * radio card's firmware locks up). + */ + +#define DRIVER_NAME "orinoco_plx" +#define PFX DRIVER_NAME ": " + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <pcmcia/cisreg.h> + +#include "orinoco.h" +#include "orinoco_pci.h" + +#define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */ +#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ +#define COR_RESET (0x80) /* reset bit in the COR register */ +#define PLX_RESET_TIME (500) /* milliseconds */ + +#define PLX_INTCSR 0x4c /* Interrupt Control & Status Register */ +#define PLX_INTCSR_INTEN (1 << 6) /* Interrupt Enable bit */ + +/* + * Do a soft reset of the card using the Configuration Option Register + */ +static int orinoco_plx_cor_reset(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + struct orinoco_pci_card *card = priv->card; + unsigned long timeout; + u16 reg; + + iowrite8(COR_VALUE | COR_RESET, card->attr_io + COR_OFFSET); + mdelay(1); + + iowrite8(COR_VALUE, card->attr_io + COR_OFFSET); + mdelay(1); + + /* Just in case, wait more until the card is no longer busy */ + timeout = jiffies + msecs_to_jiffies(PLX_RESET_TIME); + reg = hermes_read_regn(hw, CMD); + while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { + mdelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* Still busy? */ + if (reg & HERMES_CMD_BUSY) { + printk(KERN_ERR PFX "Busy timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int orinoco_plx_hw_init(struct orinoco_pci_card *card) +{ + int i; + u32 csr_reg; + static const u8 cis_magic[] = { + 0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67 + }; + + printk(KERN_DEBUG PFX "CIS: "); + for (i = 0; i < 16; i++) + printk("%02X:", ioread8(card->attr_io + (i << 1))); + printk("\n"); + + /* Verify whether a supported PC card is present */ + /* FIXME: we probably need to be smarted about this */ + for (i = 0; i < sizeof(cis_magic); i++) { + if (cis_magic[i] != ioread8(card->attr_io + (i << 1))) { + printk(KERN_ERR PFX "The CIS value of Prism2 PC " + "card is unexpected\n"); + return -ENODEV; + } + } + + /* bjoern: We need to tell the card to enable interrupts, in + case the serial eprom didn't do this already. See the + PLX9052 data book, p8-1 and 8-24 for reference. */ + csr_reg = ioread32(card->bridge_io + PLX_INTCSR); + if (!(csr_reg & PLX_INTCSR_INTEN)) { + csr_reg |= PLX_INTCSR_INTEN; + iowrite32(csr_reg, card->bridge_io + PLX_INTCSR); + csr_reg = ioread32(card->bridge_io + PLX_INTCSR); + if (!(csr_reg & PLX_INTCSR_INTEN)) { + printk(KERN_ERR PFX "Cannot enable interrupts\n"); + return -EIO; + } + } + + return 0; +} + +static int orinoco_plx_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err; + struct orinoco_private *priv; + struct orinoco_pci_card *card; + void __iomem *hermes_io, *attr_io, *bridge_io; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + bridge_io = pci_iomap(pdev, 1, 0); + if (!bridge_io) { + printk(KERN_ERR PFX "Cannot map bridge registers\n"); + err = -EIO; + goto fail_map_bridge; + } + + attr_io = pci_iomap(pdev, 2, 0); + if (!attr_io) { + printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); + err = -EIO; + goto fail_map_attr; + } + + hermes_io = pci_iomap(pdev, 3, 0); + if (!hermes_io) { + printk(KERN_ERR PFX "Cannot map chipset registers\n"); + err = -EIO; + goto fail_map_hermes; + } + + /* Allocate network device */ + priv = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_plx_cor_reset, NULL); + if (!priv) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + err = -ENOMEM; + goto fail_alloc; + } + + card = priv->card; + card->bridge_io = bridge_io; + card->attr_io = attr_io; + + hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); + + err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, + DRIVER_NAME, priv); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + + err = orinoco_plx_hw_init(card); + if (err) { + printk(KERN_ERR PFX "Hardware initialization failed\n"); + goto fail; + } + + err = orinoco_plx_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + err = orinoco_init(priv); + if (err) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); + goto fail; + } + + err = orinoco_if_add(priv, 0, 0, NULL); + if (err) { + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); + goto fail_wiphy; + } + + pci_set_drvdata(pdev, priv); + + return 0; + + fail_wiphy: + wiphy_unregister(priv_to_wiphy(priv)); + fail: + free_irq(pdev->irq, priv); + + fail_irq: + free_orinocodev(priv); + + fail_alloc: + pci_iounmap(pdev, hermes_io); + + fail_map_hermes: + pci_iounmap(pdev, attr_io); + + fail_map_attr: + pci_iounmap(pdev, bridge_io); + + fail_map_bridge: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void orinoco_plx_remove_one(struct pci_dev *pdev) +{ + struct orinoco_private *priv = pci_get_drvdata(pdev); + struct orinoco_pci_card *card = priv->card; + + orinoco_if_del(priv); + wiphy_unregister(priv_to_wiphy(priv)); + free_irq(pdev->irq, priv); + free_orinocodev(priv); + pci_iounmap(pdev, priv->hw.iobase); + pci_iounmap(pdev, card->attr_io); + pci_iounmap(pdev, card->bridge_io); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static const struct pci_device_id orinoco_plx_id_table[] = { + {0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,}, /* Siemens SpeedStream SS1023 */ + {0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,}, /* Netgear MA301 */ + {0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,}, /* Correga - does this work? */ + {0x1638, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* SMC EZConnect SMC2602W, + Eumitcom PCI WL11000, + Addtron AWA-100 */ + {0x16ab, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* Global Sun Tech GL24110P */ + {0x16ab, 0x1101, PCI_ANY_ID, PCI_ANY_ID,}, /* Reported working, but unknown */ + {0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,}, /* Linksys WDT11 */ + {0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,}, /* USR 2415 */ + {0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,}, /* Belkin F5D6000 tested by + Brendan W. McAdams <rit AT jacked-in.org> */ + {0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,}, /* 3Com AirConnect PCI tested by + Damien Persohn <damien AT persohn.net> */ + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, orinoco_plx_id_table); + +static struct pci_driver orinoco_plx_driver = { + .name = DRIVER_NAME, + .id_table = orinoco_plx_id_table, + .probe = orinoco_plx_init_one, + .remove = orinoco_plx_remove_one, + .suspend = orinoco_pci_suspend, + .resume = orinoco_pci_resume, +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Pavel Roskin <proski@gnu.org>," + " David Gibson <hermes@gibson.dropbear.id.au>," + " Daniel Barlow <dan@telent.net>)"; +MODULE_AUTHOR("Daniel Barlow <dan@telent.net>"); +MODULE_DESCRIPTION("Driver for wireless LAN cards using the PLX9052 PCI bridge"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init orinoco_plx_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_register_driver(&orinoco_plx_driver); +} + +static void __exit orinoco_plx_exit(void) +{ + pci_unregister_driver(&orinoco_plx_driver); +} + +module_init(orinoco_plx_init); +module_exit(orinoco_plx_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c b/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c new file mode 100644 index 000000000..20ce569b8 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c @@ -0,0 +1,246 @@ +/* orinoco_tmd.c + * + * Driver for Prism II devices which would usually be driven by orinoco_cs, + * but are connected to the PCI bus by a TMD7160. + * + * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net> + * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + * + * The actual driving is done by main.c, this is just resource + * allocation stuff. + * + * This driver is modeled after the orinoco_plx driver. The main + * difference is that the TMD chip has only IO port ranges and doesn't + * provide access to the PCMCIA attribute space. + * + * Pheecom sells cards with the TMD chip as "ASIC version" + */ + +#define DRIVER_NAME "orinoco_tmd" +#define PFX DRIVER_NAME ": " + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <pcmcia/cisreg.h> + +#include "orinoco.h" +#include "orinoco_pci.h" + +#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ +#define COR_RESET (0x80) /* reset bit in the COR register */ +#define TMD_RESET_TIME (500) /* milliseconds */ + +/* + * Do a soft reset of the card using the Configuration Option Register + */ +static int orinoco_tmd_cor_reset(struct orinoco_private *priv) +{ + struct hermes *hw = &priv->hw; + struct orinoco_pci_card *card = priv->card; + unsigned long timeout; + u16 reg; + + iowrite8(COR_VALUE | COR_RESET, card->bridge_io); + mdelay(1); + + iowrite8(COR_VALUE, card->bridge_io); + mdelay(1); + + /* Just in case, wait more until the card is no longer busy */ + timeout = jiffies + msecs_to_jiffies(TMD_RESET_TIME); + reg = hermes_read_regn(hw, CMD); + while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { + mdelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* Still busy? */ + if (reg & HERMES_CMD_BUSY) { + printk(KERN_ERR PFX "Busy timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + + +static int orinoco_tmd_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err; + struct orinoco_private *priv; + struct orinoco_pci_card *card; + void __iomem *hermes_io, *bridge_io; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + bridge_io = pci_iomap(pdev, 1, 0); + if (!bridge_io) { + printk(KERN_ERR PFX "Cannot map bridge registers\n"); + err = -EIO; + goto fail_map_bridge; + } + + hermes_io = pci_iomap(pdev, 2, 0); + if (!hermes_io) { + printk(KERN_ERR PFX "Cannot map chipset registers\n"); + err = -EIO; + goto fail_map_hermes; + } + + /* Allocate network device */ + priv = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_tmd_cor_reset, NULL); + if (!priv) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + err = -ENOMEM; + goto fail_alloc; + } + + card = priv->card; + card->bridge_io = bridge_io; + + hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); + + err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, + DRIVER_NAME, priv); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + + err = orinoco_tmd_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + err = orinoco_init(priv); + if (err) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); + goto fail; + } + + err = orinoco_if_add(priv, 0, 0, NULL); + if (err) { + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); + goto fail; + } + + pci_set_drvdata(pdev, priv); + + return 0; + + fail: + free_irq(pdev->irq, priv); + + fail_irq: + free_orinocodev(priv); + + fail_alloc: + pci_iounmap(pdev, hermes_io); + + fail_map_hermes: + pci_iounmap(pdev, bridge_io); + + fail_map_bridge: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void orinoco_tmd_remove_one(struct pci_dev *pdev) +{ + struct orinoco_private *priv = pci_get_drvdata(pdev); + struct orinoco_pci_card *card = priv->card; + + orinoco_if_del(priv); + free_irq(pdev->irq, priv); + free_orinocodev(priv); + pci_iounmap(pdev, priv->hw.iobase); + pci_iounmap(pdev, card->bridge_io); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static const struct pci_device_id orinoco_tmd_id_table[] = { + {0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */ + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table); + +static struct pci_driver orinoco_tmd_driver = { + .name = DRIVER_NAME, + .id_table = orinoco_tmd_id_table, + .probe = orinoco_tmd_init_one, + .remove = orinoco_tmd_remove_one, + .suspend = orinoco_pci_suspend, + .resume = orinoco_pci_resume, +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Joerg Dorchain <joerg@dorchain.net>)"; +MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>"); +MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init orinoco_tmd_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_register_driver(&orinoco_tmd_driver); +} + +static void __exit orinoco_tmd_exit(void) +{ + pci_unregister_driver(&orinoco_tmd_driver); +} + +module_init(orinoco_tmd_init); +module_exit(orinoco_tmd_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c new file mode 100644 index 000000000..977298ad9 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c @@ -0,0 +1,1748 @@ +/* + * USB Orinoco driver + * + * Copyright (c) 2003 Manuel Estrada Sainz + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + * + * Queueing code based on linux-wlan-ng 0.2.1-pre5 + * + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * + * The license is the same as above. + * + * Initialy based on USB Skeleton driver - 0.7 + * + * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * NOTE: The original USB Skeleton driver is GPL, but all that code is + * gone so MPL/GPL applies. + */ + +#define DRIVER_NAME "orinoco_usb" +#define PFX DRIVER_NAME ": " + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/poll.h> +#include <linux/slab.h> +#include <linux/fcntl.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/usb.h> +#include <linux/timer.h> + +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/wireless.h> +#include <linux/firmware.h> + +#include "mic.h" +#include "orinoco.h" + +#ifndef URB_ASYNC_UNLINK +#define URB_ASYNC_UNLINK 0 +#endif + +/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ +static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; +#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) + +struct header_struct { + /* 802.3 */ + u8 dest[ETH_ALEN]; + u8 src[ETH_ALEN]; + __be16 len; + /* 802.2 */ + u8 dsap; + u8 ssap; + u8 ctrl; + /* SNAP */ + u8 oui[3]; + __be16 ethertype; +} __packed; + +struct ez_usb_fw { + u16 size; + const u8 *code; +}; + +static struct ez_usb_fw firmware = { + .size = 0, + .code = NULL, +}; + +/* Debugging macros */ +#undef err +#define err(format, arg...) \ + do { printk(KERN_ERR PFX format "\n", ## arg); } while (0) + +/*(DEBLOBBED)*/ + +/* + * Under some conditions, the card gets stuck and stops paying attention + * to the world (i.e. data communication stalls) until we do something to + * it. Sending an INQ_TALLIES command seems to be enough and should be + * harmless otherwise. This behaviour has been observed when using the + * driver on a systemimager client during installation. In the past a + * timer was used to send INQ_TALLIES commands when there was no other + * activity, but it was troublesome and was removed. + */ + +#define USB_COMPAQ_VENDOR_ID 0x049f /* Compaq Computer Corp. */ +#define USB_COMPAQ_WL215_ID 0x001f /* Compaq WL215 USB Adapter */ +#define USB_COMPAQ_W200_ID 0x0076 /* Compaq W200 USB Adapter */ +#define USB_HP_WL215_ID 0x0082 /* Compaq WL215 USB Adapter */ + +#define USB_MELCO_VENDOR_ID 0x0411 +#define USB_BUFFALO_L11_ID 0x0006 /* BUFFALO WLI-USB-L11 */ +#define USB_BUFFALO_L11G_WR_ID 0x000B /* BUFFALO WLI-USB-L11G-WR */ +#define USB_BUFFALO_L11G_ID 0x000D /* BUFFALO WLI-USB-L11G */ + +#define USB_LUCENT_VENDOR_ID 0x047E /* Lucent Technologies */ +#define USB_LUCENT_ORINOCO_ID 0x0300 /* Lucent/Agere Orinoco USB Client */ + +#define USB_AVAYA8_VENDOR_ID 0x0D98 +#define USB_AVAYAE_VENDOR_ID 0x0D9E +#define USB_AVAYA_WIRELESS_ID 0x0300 /* Avaya Wireless USB Card */ + +#define USB_AGERE_VENDOR_ID 0x0D4E /* Agere Systems */ +#define USB_AGERE_MODEL0801_ID 0x1000 /* Wireless USB Card Model 0801 */ +#define USB_AGERE_MODEL0802_ID 0x1001 /* Wireless USB Card Model 0802 */ +#define USB_AGERE_REBRANDED_ID 0x047A /* WLAN USB Card */ + +#define USB_ELSA_VENDOR_ID 0x05CC +#define USB_ELSA_AIRLANCER_ID 0x3100 /* ELSA AirLancer USB-11 */ + +#define USB_LEGEND_VENDOR_ID 0x0E7C +#define USB_LEGEND_JOYNET_ID 0x0300 /* Joynet WLAN USB Card */ + +#define USB_SAMSUNG_VENDOR_ID 0x04E8 +#define USB_SAMSUNG_SEW2001U1_ID 0x5002 /* Samsung SEW-2001u Card */ +#define USB_SAMSUNG_SEW2001U2_ID 0x5B11 /* Samsung SEW-2001u Card */ +#define USB_SAMSUNG_SEW2003U_ID 0x7011 /* Samsung SEW-2003U Card */ + +#define USB_IGATE_VENDOR_ID 0x0681 +#define USB_IGATE_IGATE_11M_ID 0x0012 /* I-GATE 11M USB Card */ + +#define USB_FUJITSU_VENDOR_ID 0x0BF8 +#define USB_FUJITSU_E1100_ID 0x1002 /* connect2AIR WLAN E-1100 USB */ + +#define USB_2WIRE_VENDOR_ID 0x1630 +#define USB_2WIRE_WIRELESS_ID 0xff81 /* 2Wire Wireless USB adapter */ + + +#define EZUSB_REQUEST_FW_TRANS 0xA0 +#define EZUSB_REQUEST_TRIGER 0xAA +#define EZUSB_REQUEST_TRIG_AC 0xAC +#define EZUSB_CPUCS_REG 0x7F92 + +#define EZUSB_RID_TX 0x0700 +#define EZUSB_RID_RX 0x0701 +#define EZUSB_RID_INIT1 0x0702 +#define EZUSB_RID_ACK 0x0710 +#define EZUSB_RID_READ_PDA 0x0800 +#define EZUSB_RID_PROG_INIT 0x0852 +#define EZUSB_RID_PROG_SET_ADDR 0x0853 +#define EZUSB_RID_PROG_BYTES 0x0854 +#define EZUSB_RID_PROG_END 0x0855 +#define EZUSB_RID_DOCMD 0x0860 + +/* Recognize info frames */ +#define EZUSB_IS_INFO(id) ((id >= 0xF000) && (id <= 0xF2FF)) + +#define EZUSB_MAGIC 0x0210 + +#define EZUSB_FRAME_DATA 1 +#define EZUSB_FRAME_CONTROL 2 + +#define DEF_TIMEOUT (3 * HZ) + +#define BULK_BUF_SIZE 2048 + +#define MAX_DL_SIZE (BULK_BUF_SIZE - sizeof(struct ezusb_packet)) + +#define FW_BUF_SIZE 64 +#define FW_VAR_OFFSET_PTR 0x359 +#define FW_VAR_VALUE 0 +#define FW_HOLE_START 0x100 +#define FW_HOLE_END 0x300 + +struct ezusb_packet { + __le16 magic; /* 0x0210 */ + u8 req_reply_count; + u8 ans_reply_count; + __le16 frame_type; /* 0x01 for data frames, 0x02 otherwise */ + __le16 size; /* transport size */ + __le16 crc; /* CRC up to here */ + __le16 hermes_len; + __le16 hermes_rid; + u8 data[0]; +} __packed; + +/* Table of devices that work or may work with this driver */ +static struct usb_device_id ezusb_table[] = { + {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_WL215_ID)}, + {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_HP_WL215_ID)}, + {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_W200_ID)}, + {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11_ID)}, + {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_WR_ID)}, + {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_ID)}, + {USB_DEVICE(USB_LUCENT_VENDOR_ID, USB_LUCENT_ORINOCO_ID)}, + {USB_DEVICE(USB_AVAYA8_VENDOR_ID, USB_AVAYA_WIRELESS_ID)}, + {USB_DEVICE(USB_AVAYAE_VENDOR_ID, USB_AVAYA_WIRELESS_ID)}, + {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0801_ID)}, + {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0802_ID)}, + {USB_DEVICE(USB_ELSA_VENDOR_ID, USB_ELSA_AIRLANCER_ID)}, + {USB_DEVICE(USB_LEGEND_VENDOR_ID, USB_LEGEND_JOYNET_ID)}, + {USB_DEVICE_VER(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U1_ID, + 0, 0)}, + {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U2_ID)}, + {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2003U_ID)}, + {USB_DEVICE(USB_IGATE_VENDOR_ID, USB_IGATE_IGATE_11M_ID)}, + {USB_DEVICE(USB_FUJITSU_VENDOR_ID, USB_FUJITSU_E1100_ID)}, + {USB_DEVICE(USB_2WIRE_VENDOR_ID, USB_2WIRE_WIRELESS_ID)}, + {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_REBRANDED_ID)}, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ezusb_table); + +/* Structure to hold all of our device specific stuff */ +struct ezusb_priv { + struct usb_device *udev; + struct net_device *dev; + struct mutex mtx; + spinlock_t req_lock; + struct list_head req_pending; + struct list_head req_active; + spinlock_t reply_count_lock; + u16 hermes_reg_fake[0x40]; + u8 *bap_buf; + struct urb *read_urb; + int read_pipe; + int write_pipe; + u8 reply_count; +}; + +enum ezusb_state { + EZUSB_CTX_START, + EZUSB_CTX_QUEUED, + EZUSB_CTX_REQ_SUBMITTED, + EZUSB_CTX_REQ_COMPLETE, + EZUSB_CTX_RESP_RECEIVED, + EZUSB_CTX_REQ_TIMEOUT, + EZUSB_CTX_REQ_FAILED, + EZUSB_CTX_RESP_TIMEOUT, + EZUSB_CTX_REQSUBMIT_FAIL, + EZUSB_CTX_COMPLETE, +}; + +struct request_context { + struct list_head list; + atomic_t refcount; + struct completion done; /* Signals that CTX is dead */ + int killed; + struct urb *outurb; /* OUT for req pkt */ + struct ezusb_priv *upriv; + struct ezusb_packet *buf; + int buf_length; + struct timer_list timer; /* Timeout handling */ + enum ezusb_state state; /* Current state */ + /* the RID that we will wait for */ + u16 out_rid; + u16 in_rid; +}; + + +/* Forward declarations */ +static void ezusb_ctx_complete(struct request_context *ctx); +static void ezusb_req_queue_run(struct ezusb_priv *upriv); +static void ezusb_bulk_in_callback(struct urb *urb); + +static inline u8 ezusb_reply_inc(u8 count) +{ + if (count < 0x7F) + return count + 1; + else + return 1; +} + +static void ezusb_request_context_put(struct request_context *ctx) +{ + if (!atomic_dec_and_test(&ctx->refcount)) + return; + + WARN_ON(!ctx->done.done); + BUG_ON(ctx->outurb->status == -EINPROGRESS); + BUG_ON(timer_pending(&ctx->timer)); + usb_free_urb(ctx->outurb); + kfree(ctx->buf); + kfree(ctx); +} + +static inline void ezusb_mod_timer(struct ezusb_priv *upriv, + struct timer_list *timer, + unsigned long expire) +{ + if (!upriv->udev) + return; + mod_timer(timer, expire); +} + +static void ezusb_request_timerfn(u_long _ctx) +{ + struct request_context *ctx = (void *) _ctx; + + ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; + if (usb_unlink_urb(ctx->outurb) == -EINPROGRESS) { + ctx->state = EZUSB_CTX_REQ_TIMEOUT; + } else { + ctx->state = EZUSB_CTX_RESP_TIMEOUT; + dev_dbg(&ctx->outurb->dev->dev, "couldn't unlink\n"); + atomic_inc(&ctx->refcount); + ctx->killed = 1; + ezusb_ctx_complete(ctx); + ezusb_request_context_put(ctx); + } +}; + +static struct request_context *ezusb_alloc_ctx(struct ezusb_priv *upriv, + u16 out_rid, u16 in_rid) +{ + struct request_context *ctx; + + ctx = kzalloc(sizeof(*ctx), GFP_ATOMIC); + if (!ctx) + return NULL; + + ctx->buf = kmalloc(BULK_BUF_SIZE, GFP_ATOMIC); + if (!ctx->buf) { + kfree(ctx); + return NULL; + } + ctx->outurb = usb_alloc_urb(0, GFP_ATOMIC); + if (!ctx->outurb) { + kfree(ctx->buf); + kfree(ctx); + return NULL; + } + + ctx->upriv = upriv; + ctx->state = EZUSB_CTX_START; + ctx->out_rid = out_rid; + ctx->in_rid = in_rid; + + atomic_set(&ctx->refcount, 1); + init_completion(&ctx->done); + + setup_timer(&ctx->timer, ezusb_request_timerfn, (u_long)ctx); + return ctx; +} + + +/* Hopefully the real complete_all will soon be exported, in the mean + * while this should work. */ +static inline void ezusb_complete_all(struct completion *comp) +{ + complete(comp); + complete(comp); + complete(comp); + complete(comp); +} + +static void ezusb_ctx_complete(struct request_context *ctx) +{ + struct ezusb_priv *upriv = ctx->upriv; + unsigned long flags; + + spin_lock_irqsave(&upriv->req_lock, flags); + + list_del_init(&ctx->list); + if (upriv->udev) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + ezusb_req_queue_run(upriv); + spin_lock_irqsave(&upriv->req_lock, flags); + } + + switch (ctx->state) { + case EZUSB_CTX_COMPLETE: + case EZUSB_CTX_REQSUBMIT_FAIL: + case EZUSB_CTX_REQ_FAILED: + case EZUSB_CTX_REQ_TIMEOUT: + case EZUSB_CTX_RESP_TIMEOUT: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + if ((ctx->out_rid == EZUSB_RID_TX) && upriv->dev) { + struct net_device *dev = upriv->dev; + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + + if (ctx->state != EZUSB_CTX_COMPLETE) + stats->tx_errors++; + else + stats->tx_packets++; + + netif_wake_queue(dev); + } + ezusb_complete_all(&ctx->done); + ezusb_request_context_put(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + if (!upriv->udev) { + /* This is normal, as all request contexts get flushed + * when the device is disconnected */ + err("Called, CTX not terminating, but device gone"); + ezusb_complete_all(&ctx->done); + ezusb_request_context_put(ctx); + break; + } + + err("Called, CTX not in terminating state."); + /* Things are really bad if this happens. Just leak + * the CTX because it may still be linked to the + * queue or the OUT urb may still be active. + * Just leaking at least prevents an Oops or Panic. + */ + break; + } +} + +/** + * ezusb_req_queue_run: + * Description: + * Note: Only one active CTX at any one time, because there's no + * other (reliable) way to match the response URB to the correct + * CTX. + **/ +static void ezusb_req_queue_run(struct ezusb_priv *upriv) +{ + unsigned long flags; + struct request_context *ctx; + int result; + + spin_lock_irqsave(&upriv->req_lock, flags); + + if (!list_empty(&upriv->req_active)) + goto unlock; + + if (list_empty(&upriv->req_pending)) + goto unlock; + + ctx = + list_entry(upriv->req_pending.next, struct request_context, + list); + + if (!ctx->upriv->udev) + goto unlock; + + /* We need to split this off to avoid a race condition */ + list_move_tail(&ctx->list, &upriv->req_active); + + if (ctx->state == EZUSB_CTX_QUEUED) { + atomic_inc(&ctx->refcount); + result = usb_submit_urb(ctx->outurb, GFP_ATOMIC); + if (result) { + ctx->state = EZUSB_CTX_REQSUBMIT_FAIL; + + spin_unlock_irqrestore(&upriv->req_lock, flags); + + err("Fatal, failed to submit command urb." + " error=%d\n", result); + + ezusb_ctx_complete(ctx); + ezusb_request_context_put(ctx); + goto done; + } + + ctx->state = EZUSB_CTX_REQ_SUBMITTED; + ezusb_mod_timer(ctx->upriv, &ctx->timer, + jiffies + DEF_TIMEOUT); + } + + unlock: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + done: + return; +} + +static void ezusb_req_enqueue_run(struct ezusb_priv *upriv, + struct request_context *ctx) +{ + unsigned long flags; + + spin_lock_irqsave(&upriv->req_lock, flags); + + if (!ctx->upriv->udev) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + goto done; + } + atomic_inc(&ctx->refcount); + list_add_tail(&ctx->list, &upriv->req_pending); + spin_unlock_irqrestore(&upriv->req_lock, flags); + + ctx->state = EZUSB_CTX_QUEUED; + ezusb_req_queue_run(upriv); + + done: + return; +} + +static void ezusb_request_out_callback(struct urb *urb) +{ + unsigned long flags; + enum ezusb_state state; + struct request_context *ctx = urb->context; + struct ezusb_priv *upriv = ctx->upriv; + + spin_lock_irqsave(&upriv->req_lock, flags); + + del_timer(&ctx->timer); + + if (ctx->killed) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + pr_warn("interrupt called with dead ctx\n"); + goto out; + } + + state = ctx->state; + + if (urb->status == 0) { + switch (state) { + case EZUSB_CTX_REQ_SUBMITTED: + if (ctx->in_rid) { + ctx->state = EZUSB_CTX_REQ_COMPLETE; + /* reply URB still pending */ + ezusb_mod_timer(upriv, &ctx->timer, + jiffies + DEF_TIMEOUT); + spin_unlock_irqrestore(&upriv->req_lock, + flags); + break; + } + /* fall through */ + case EZUSB_CTX_RESP_RECEIVED: + /* IN already received before this OUT-ACK */ + ctx->state = EZUSB_CTX_COMPLETE; + spin_unlock_irqrestore(&upriv->req_lock, flags); + ezusb_ctx_complete(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + err("Unexpected state(0x%x, %d) in OUT URB", + state, urb->status); + break; + } + } else { + /* If someone cancels the OUT URB then its status + * should be either -ECONNRESET or -ENOENT. + */ + switch (state) { + case EZUSB_CTX_REQ_SUBMITTED: + case EZUSB_CTX_RESP_RECEIVED: + ctx->state = EZUSB_CTX_REQ_FAILED; + /* fall through */ + + case EZUSB_CTX_REQ_FAILED: + case EZUSB_CTX_REQ_TIMEOUT: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + ezusb_ctx_complete(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + err("Unexpected state(0x%x, %d) in OUT URB", + state, urb->status); + break; + } + } + out: + ezusb_request_context_put(ctx); +} + +static void ezusb_request_in_callback(struct ezusb_priv *upriv, + struct urb *urb) +{ + struct ezusb_packet *ans = urb->transfer_buffer; + struct request_context *ctx = NULL; + enum ezusb_state state; + unsigned long flags; + + /* Find the CTX on the active queue that requested this URB */ + spin_lock_irqsave(&upriv->req_lock, flags); + if (upriv->udev) { + struct list_head *item; + + list_for_each(item, &upriv->req_active) { + struct request_context *c; + int reply_count; + + c = list_entry(item, struct request_context, list); + reply_count = + ezusb_reply_inc(c->buf->req_reply_count); + if ((ans->ans_reply_count == reply_count) + && (le16_to_cpu(ans->hermes_rid) == c->in_rid)) { + ctx = c; + break; + } + netdev_dbg(upriv->dev, "Skipped (0x%x/0x%x) (%d/%d)\n", + le16_to_cpu(ans->hermes_rid), c->in_rid, + ans->ans_reply_count, reply_count); + } + } + + if (ctx == NULL) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + err("%s: got unexpected RID: 0x%04X", __func__, + le16_to_cpu(ans->hermes_rid)); + ezusb_req_queue_run(upriv); + return; + } + + /* The data we want is in the in buffer, exchange */ + urb->transfer_buffer = ctx->buf; + ctx->buf = (void *) ans; + ctx->buf_length = urb->actual_length; + + state = ctx->state; + switch (state) { + case EZUSB_CTX_REQ_SUBMITTED: + /* We have received our response URB before + * our request has been acknowledged. Do NOT + * destroy our CTX yet, because our OUT URB + * is still alive ... + */ + ctx->state = EZUSB_CTX_RESP_RECEIVED; + spin_unlock_irqrestore(&upriv->req_lock, flags); + + /* Let the machine continue running. */ + break; + + case EZUSB_CTX_REQ_COMPLETE: + /* This is the usual path: our request + * has already been acknowledged, and + * we have now received the reply. + */ + ctx->state = EZUSB_CTX_COMPLETE; + + /* Stop the intimer */ + del_timer(&ctx->timer); + spin_unlock_irqrestore(&upriv->req_lock, flags); + + /* Call the completion handler */ + ezusb_ctx_complete(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + pr_warn("Matched IN URB, unexpected context state(0x%x)\n", + state); + /* Throw this CTX away and try submitting another */ + del_timer(&ctx->timer); + ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; + usb_unlink_urb(ctx->outurb); + ezusb_req_queue_run(upriv); + break; + } /* switch */ +} + + +static void ezusb_req_ctx_wait(struct ezusb_priv *upriv, + struct request_context *ctx) +{ + switch (ctx->state) { + case EZUSB_CTX_QUEUED: + case EZUSB_CTX_REQ_SUBMITTED: + case EZUSB_CTX_REQ_COMPLETE: + case EZUSB_CTX_RESP_RECEIVED: + if (in_softirq()) { + /* If we get called from a timer, timeout timers don't + * get the chance to run themselves. So we make sure + * that we don't sleep for ever */ + int msecs = DEF_TIMEOUT * (1000 / HZ); + while (!ctx->done.done && msecs--) + udelay(1000); + } else { + wait_event_interruptible(ctx->done.wait, + ctx->done.done); + } + break; + default: + /* Done or failed - nothing to wait for */ + break; + } +} + +static inline u16 build_crc(struct ezusb_packet *data) +{ + u16 crc = 0; + u8 *bytes = (u8 *)data; + int i; + + for (i = 0; i < 8; i++) + crc = (crc << 1) + bytes[i]; + + return crc; +} + +/** + * ezusb_fill_req: + * + * if data == NULL and length > 0 the data is assumed to be already in + * the target buffer and only the header is filled. + * + */ +static int ezusb_fill_req(struct ezusb_packet *req, u16 length, u16 rid, + const void *data, u16 frame_type, u8 reply_count) +{ + int total_size = sizeof(*req) + length; + + BUG_ON(total_size > BULK_BUF_SIZE); + + req->magic = cpu_to_le16(EZUSB_MAGIC); + req->req_reply_count = reply_count; + req->ans_reply_count = 0; + req->frame_type = cpu_to_le16(frame_type); + req->size = cpu_to_le16(length + 4); + req->crc = cpu_to_le16(build_crc(req)); + req->hermes_len = cpu_to_le16(HERMES_BYTES_TO_RECLEN(length)); + req->hermes_rid = cpu_to_le16(rid); + if (data) + memcpy(req->data, data, length); + return total_size; +} + +static int ezusb_submit_in_urb(struct ezusb_priv *upriv) +{ + int retval = 0; + void *cur_buf = upriv->read_urb->transfer_buffer; + + if (upriv->read_urb->status == -EINPROGRESS) { + netdev_dbg(upriv->dev, "urb busy, not resubmiting\n"); + retval = -EBUSY; + goto exit; + } + usb_fill_bulk_urb(upriv->read_urb, upriv->udev, upriv->read_pipe, + cur_buf, BULK_BUF_SIZE, + ezusb_bulk_in_callback, upriv); + upriv->read_urb->transfer_flags = 0; + retval = usb_submit_urb(upriv->read_urb, GFP_ATOMIC); + if (retval) + err("%s submit failed %d", __func__, retval); + + exit: + return retval; +} + +static inline int ezusb_8051_cpucs(struct ezusb_priv *upriv, int reset) +{ + u8 res_val = reset; /* avoid argument promotion */ + + if (!upriv->udev) { + err("%s: !upriv->udev", __func__); + return -EFAULT; + } + return usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_FW_TRANS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | + USB_DIR_OUT, EZUSB_CPUCS_REG, 0, &res_val, + sizeof(res_val), DEF_TIMEOUT); +} + +static int ezusb_firmware_download(struct ezusb_priv *upriv, + struct ez_usb_fw *fw) +{ + u8 *fw_buffer; + int retval, addr; + int variant_offset; + + fw_buffer = kmalloc(FW_BUF_SIZE, GFP_KERNEL); + if (!fw_buffer) { + printk(KERN_ERR PFX "Out of memory for firmware buffer.\n"); + return -ENOMEM; + } + /* + * This byte is 1 and should be replaced with 0. The offset is + * 0x10AD in version 0.0.6. The byte in question should follow + * the end of the code pointed to by the jump in the beginning + * of the firmware. Also, it is read by code located at 0x358. + */ + variant_offset = be16_to_cpup((__be16 *) &fw->code[FW_VAR_OFFSET_PTR]); + if (variant_offset >= fw->size) { + printk(KERN_ERR PFX "Invalid firmware variant offset: " + "0x%04x\n", variant_offset); + retval = -EINVAL; + goto fail; + } + + retval = ezusb_8051_cpucs(upriv, 1); + if (retval < 0) + goto fail; + for (addr = 0; addr < fw->size; addr += FW_BUF_SIZE) { + /* 0x100-0x300 should be left alone, it contains card + * specific data, like USB enumeration information */ + if ((addr >= FW_HOLE_START) && (addr < FW_HOLE_END)) + continue; + + memcpy(fw_buffer, &fw->code[addr], FW_BUF_SIZE); + if (variant_offset >= addr && + variant_offset < addr + FW_BUF_SIZE) { + netdev_dbg(upriv->dev, + "Patching card_variant byte at 0x%04X\n", + variant_offset); + fw_buffer[variant_offset - addr] = FW_VAR_VALUE; + } + retval = usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_FW_TRANS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE + | USB_DIR_OUT, + addr, 0x0, + fw_buffer, FW_BUF_SIZE, + DEF_TIMEOUT); + + if (retval < 0) + goto fail; + } + retval = ezusb_8051_cpucs(upriv, 0); + if (retval < 0) + goto fail; + + goto exit; + fail: + printk(KERN_ERR PFX "Firmware download failed, error %d\n", + retval); + exit: + kfree(fw_buffer); + return retval; +} + +static int ezusb_access_ltv(struct ezusb_priv *upriv, + struct request_context *ctx, + u16 length, const void *data, u16 frame_type, + void *ans_buff, unsigned ans_size, u16 *ans_length) +{ + int req_size; + int retval = 0; + enum ezusb_state state; + + BUG_ON(in_irq()); + + if (!upriv->udev) { + retval = -ENODEV; + goto exit; + } + + if (upriv->read_urb->status != -EINPROGRESS) + err("%s: in urb not pending", __func__); + + /* protect upriv->reply_count, guarantee sequential numbers */ + spin_lock_bh(&upriv->reply_count_lock); + req_size = ezusb_fill_req(ctx->buf, length, ctx->out_rid, data, + frame_type, upriv->reply_count); + usb_fill_bulk_urb(ctx->outurb, upriv->udev, upriv->write_pipe, + ctx->buf, req_size, + ezusb_request_out_callback, ctx); + + if (ctx->in_rid) + upriv->reply_count = ezusb_reply_inc(upriv->reply_count); + + ezusb_req_enqueue_run(upriv, ctx); + + spin_unlock_bh(&upriv->reply_count_lock); + + if (ctx->in_rid) + ezusb_req_ctx_wait(upriv, ctx); + + state = ctx->state; + switch (state) { + case EZUSB_CTX_COMPLETE: + retval = ctx->outurb->status; + break; + + case EZUSB_CTX_QUEUED: + case EZUSB_CTX_REQ_SUBMITTED: + if (!ctx->in_rid) + break; + default: + err("%s: Unexpected context state %d", __func__, + state); + /* fall though */ + case EZUSB_CTX_REQ_TIMEOUT: + case EZUSB_CTX_REQ_FAILED: + case EZUSB_CTX_RESP_TIMEOUT: + case EZUSB_CTX_REQSUBMIT_FAIL: + printk(KERN_ERR PFX "Access failed, resetting (state %d," + " reply_count %d)\n", state, upriv->reply_count); + upriv->reply_count = 0; + if (state == EZUSB_CTX_REQ_TIMEOUT + || state == EZUSB_CTX_RESP_TIMEOUT) { + printk(KERN_ERR PFX "ctx timed out\n"); + retval = -ETIMEDOUT; + } else { + printk(KERN_ERR PFX "ctx failed\n"); + retval = -EFAULT; + } + goto exit; + } + if (ctx->in_rid) { + struct ezusb_packet *ans = ctx->buf; + unsigned exp_len; + + if (ans->hermes_len != 0) + exp_len = le16_to_cpu(ans->hermes_len) * 2 + 12; + else + exp_len = 14; + + if (exp_len != ctx->buf_length) { + err("%s: length mismatch for RID 0x%04x: " + "expected %d, got %d", __func__, + ctx->in_rid, exp_len, ctx->buf_length); + retval = -EIO; + goto exit; + } + + if (ans_buff) + memcpy(ans_buff, ans->data, min(exp_len, ans_size)); + if (ans_length) + *ans_length = le16_to_cpu(ans->hermes_len); + } + exit: + ezusb_request_context_put(ctx); + return retval; +} + +static int ezusb_write_ltv(struct hermes *hw, int bap, u16 rid, + u16 length, const void *data) +{ + struct ezusb_priv *upriv = hw->priv; + u16 frame_type; + struct request_context *ctx; + + if (length == 0) + return -EINVAL; + + length = HERMES_RECLEN_TO_BYTES(length); + + /* On memory mapped devices HERMES_RID_CNFGROUPADDRESSES can be + * set to be empty, but the USB bridge doesn't like it */ + if (length == 0) + return 0; + + ctx = ezusb_alloc_ctx(upriv, rid, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + if (rid == EZUSB_RID_TX) + frame_type = EZUSB_FRAME_DATA; + else + frame_type = EZUSB_FRAME_CONTROL; + + return ezusb_access_ltv(upriv, ctx, length, data, frame_type, + NULL, 0, NULL); +} + +static int ezusb_read_ltv(struct hermes *hw, int bap, u16 rid, + unsigned bufsize, u16 *length, void *buf) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + if (bufsize % 2) + return -EINVAL; + + ctx = ezusb_alloc_ctx(upriv, rid, rid); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, 0, NULL, EZUSB_FRAME_CONTROL, + buf, bufsize, length); +} + +static int ezusb_doicmd_wait(struct hermes *hw, u16 cmd, u16 parm0, u16 parm1, + u16 parm2, struct hermes_response *resp) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + __le16 data[4] = { + cpu_to_le16(cmd), + cpu_to_le16(parm0), + cpu_to_le16(parm1), + cpu_to_le16(parm2), + }; + netdev_dbg(upriv->dev, + "0x%04X, parm0 0x%04X, parm1 0x%04X, parm2 0x%04X\n", cmd, + parm0, parm1, parm2); + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0, + struct hermes_response *resp) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + __le16 data[4] = { + cpu_to_le16(cmd), + cpu_to_le16(parm0), + 0, + 0, + }; + netdev_dbg(upriv->dev, "0x%04X, parm0 0x%04X\n", cmd, parm0); + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_bap_pread(struct hermes *hw, int bap, + void *buf, int len, u16 id, u16 offset) +{ + struct ezusb_priv *upriv = hw->priv; + struct ezusb_packet *ans = (void *) upriv->read_urb->transfer_buffer; + int actual_length = upriv->read_urb->actual_length; + + if (id == EZUSB_RID_RX) { + if ((sizeof(*ans) + offset + len) > actual_length) { + printk(KERN_ERR PFX "BAP read beyond buffer end " + "in rx frame\n"); + return -EINVAL; + } + memcpy(buf, ans->data + offset, len); + return 0; + } + + if (EZUSB_IS_INFO(id)) { + /* Include 4 bytes for length/type */ + if ((sizeof(*ans) + offset + len - 4) > actual_length) { + printk(KERN_ERR PFX "BAP read beyond buffer end " + "in info frame\n"); + return -EFAULT; + } + memcpy(buf, ans->data + offset - 4, len); + } else { + printk(KERN_ERR PFX "Unexpected fid 0x%04x\n", id); + return -EINVAL; + } + + return 0; +} + +static int ezusb_read_pda(struct hermes *hw, __le16 *pda, + u32 pda_addr, u16 pda_len) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + __le16 data[] = { + cpu_to_le16(pda_addr & 0xffff), + cpu_to_le16(pda_len - 4) + }; + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_READ_PDA, EZUSB_RID_READ_PDA); + if (!ctx) + return -ENOMEM; + + /* wl_lkm does not include PDA size in the PDA area. + * We will pad the information into pda, so other routines + * don't have to be modified */ + pda[0] = cpu_to_le16(pda_len - 2); + /* Includes CFG_PROD_DATA but not itself */ + pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, &pda[2], pda_len - 4, + NULL); +} + +static int ezusb_program_init(struct hermes *hw, u32 entry_point) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + __le32 data = cpu_to_le32(entry_point); + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_INIT, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_program_end(struct hermes *hw) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_END, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, 0, NULL, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_program_bytes(struct hermes *hw, const char *buf, + u32 addr, u32 len) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + __le32 data = cpu_to_le32(addr); + int err; + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_SET_ADDR, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + err = ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); + if (err) + return err; + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_BYTES, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, len, buf, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_program(struct hermes *hw, const char *buf, + u32 addr, u32 len) +{ + u32 ch_addr; + u32 ch_len; + int err = 0; + + /* We can only send 2048 bytes out of the bulk xmit at a time, + * so we have to split any programming into chunks of <2048 + * bytes. */ + + ch_len = (len < MAX_DL_SIZE) ? len : MAX_DL_SIZE; + ch_addr = addr; + + while (ch_addr < (addr + len)) { + pr_debug("Programming subblock of length %d " + "to address 0x%08x. Data @ %p\n", + ch_len, ch_addr, &buf[ch_addr - addr]); + + err = ezusb_program_bytes(hw, &buf[ch_addr - addr], + ch_addr, ch_len); + if (err) + break; + + ch_addr += ch_len; + ch_len = ((addr + len - ch_addr) < MAX_DL_SIZE) ? + (addr + len - ch_addr) : MAX_DL_SIZE; + } + + return err; +} + +static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct ezusb_priv *upriv = priv->card; + u8 mic[MICHAEL_MIC_LEN + 1]; + int err = 0; + int tx_control; + unsigned long flags; + struct request_context *ctx; + u8 *buf; + int tx_size; + + if (!netif_running(dev)) { + printk(KERN_ERR "%s: Tx on stopped device!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (netif_queue_stopped(dev)) { + printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_ERR + "%s: ezusb_xmit() called while hw_unavailable\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (!netif_carrier_ok(dev) || + (priv->iw_mode == NL80211_IFTYPE_MONITOR)) { + /* Oops, the firmware hasn't established a connection, + silently drop the packet (this seems to be the + safest approach). */ + goto drop; + } + + /* Check packet length */ + if (skb->len < ETH_HLEN) + goto drop; + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0); + if (!ctx) + goto busy; + + memset(ctx->buf, 0, BULK_BUF_SIZE); + buf = ctx->buf->data; + + tx_control = 0; + + err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control, + &mic[0]); + if (err) + goto drop; + + { + __le16 *tx_cntl = (__le16 *)buf; + *tx_cntl = cpu_to_le16(tx_control); + buf += sizeof(*tx_cntl); + } + + memcpy(buf, skb->data, skb->len); + buf += skb->len; + + if (tx_control & HERMES_TXCTRL_MIC) { + u8 *m = mic; + /* Mic has been offset so it can be copied to an even + * address. We're copying eveything anyway, so we + * don't need to copy that first byte. */ + if (skb->len % 2) + m++; + memcpy(buf, m, MICHAEL_MIC_LEN); + buf += MICHAEL_MIC_LEN; + } + + /* Finally, we actually initiate the send */ + netif_stop_queue(dev); + + /* The card may behave better if we send evenly sized usb transfers */ + tx_size = ALIGN(buf - ctx->buf->data, 2); + + err = ezusb_access_ltv(upriv, ctx, tx_size, NULL, + EZUSB_FRAME_DATA, NULL, 0, NULL); + + if (err) { + netif_start_queue(dev); + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d transmitting packet\n", + dev->name, err); + goto busy; + } + + dev->trans_start = jiffies; + stats->tx_bytes += skb->len; + goto ok; + + drop: + stats->tx_errors++; + stats->tx_dropped++; + + ok: + orinoco_unlock(priv, &flags); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + + busy: + orinoco_unlock(priv, &flags); + return NETDEV_TX_BUSY; +} + +static int ezusb_allocate(struct hermes *hw, u16 size, u16 *fid) +{ + *fid = EZUSB_RID_TX; + return 0; +} + + +static int ezusb_hard_reset(struct orinoco_private *priv) +{ + struct ezusb_priv *upriv = priv->card; + int retval = ezusb_8051_cpucs(upriv, 1); + + if (retval < 0) { + err("Failed to reset"); + return retval; + } + + retval = ezusb_8051_cpucs(upriv, 0); + if (retval < 0) { + err("Failed to unreset"); + return retval; + } + + netdev_dbg(upriv->dev, "sending control message\n"); + retval = usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_TRIGER, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | + USB_DIR_OUT, 0x0, 0x0, NULL, 0, + DEF_TIMEOUT); + if (retval < 0) { + err("EZUSB_REQUEST_TRIGER failed retval %d", retval); + return retval; + } +#if 0 + dbg("Sending EZUSB_REQUEST_TRIG_AC"); + retval = usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_TRIG_AC, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | + USB_DIR_OUT, 0x00FA, 0x0, NULL, 0, + DEF_TIMEOUT); + if (retval < 0) { + err("EZUSB_REQUEST_TRIG_AC failed retval %d", retval); + return retval; + } +#endif + + return 0; +} + + +static int ezusb_init(struct hermes *hw) +{ + struct ezusb_priv *upriv = hw->priv; + int retval; + + BUG_ON(in_interrupt()); + BUG_ON(!upriv); + + upriv->reply_count = 0; + /* Write the MAGIC number on the simulated registers to keep + * orinoco.c happy */ + hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); + hermes_write_regn(hw, RXFID, EZUSB_RID_RX); + + usb_kill_urb(upriv->read_urb); + ezusb_submit_in_urb(upriv); + + retval = ezusb_write_ltv(hw, 0, EZUSB_RID_INIT1, + HERMES_BYTES_TO_RECLEN(2), "\x10\x00"); + if (retval < 0) { + printk(KERN_ERR PFX "EZUSB_RID_INIT1 error %d\n", retval); + return retval; + } + + retval = ezusb_docmd_wait(hw, HERMES_CMD_INIT, 0, NULL); + if (retval < 0) { + printk(KERN_ERR PFX "HERMES_CMD_INIT error %d\n", retval); + return retval; + } + + return 0; +} + +static void ezusb_bulk_in_callback(struct urb *urb) +{ + struct ezusb_priv *upriv = (struct ezusb_priv *) urb->context; + struct ezusb_packet *ans = urb->transfer_buffer; + u16 crc; + u16 hermes_rid; + + if (upriv->udev == NULL) + return; + + if (urb->status == -ETIMEDOUT) { + /* When a device gets unplugged we get this every time + * we resubmit, flooding the logs. Since we don't use + * USB timeouts, it shouldn't happen any other time*/ + pr_warn("%s: urb timed out, not resubmitting\n", __func__); + return; + } + if (urb->status == -ECONNABORTED) { + pr_warn("%s: connection abort, resubmitting urb\n", + __func__); + goto resubmit; + } + if ((urb->status == -EILSEQ) + || (urb->status == -ENOENT) + || (urb->status == -ECONNRESET)) { + netdev_dbg(upriv->dev, "status %d, not resubmiting\n", + urb->status); + return; + } + if (urb->status) + netdev_dbg(upriv->dev, "status: %d length: %d\n", + urb->status, urb->actual_length); + if (urb->actual_length < sizeof(*ans)) { + err("%s: short read, ignoring", __func__); + goto resubmit; + } + crc = build_crc(ans); + if (le16_to_cpu(ans->crc) != crc) { + err("CRC error, ignoring packet"); + goto resubmit; + } + + hermes_rid = le16_to_cpu(ans->hermes_rid); + if ((hermes_rid != EZUSB_RID_RX) && !EZUSB_IS_INFO(hermes_rid)) { + ezusb_request_in_callback(upriv, urb); + } else if (upriv->dev) { + struct net_device *dev = upriv->dev; + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + + if (hermes_rid == EZUSB_RID_RX) { + __orinoco_ev_rx(dev, hw); + } else { + hermes_write_regn(hw, INFOFID, + le16_to_cpu(ans->hermes_rid)); + __orinoco_ev_info(dev, hw); + } + } + + resubmit: + if (upriv->udev) + ezusb_submit_in_urb(upriv); +} + +static inline void ezusb_delete(struct ezusb_priv *upriv) +{ + struct net_device *dev; + struct list_head *item; + struct list_head *tmp_item; + unsigned long flags; + + BUG_ON(in_interrupt()); + BUG_ON(!upriv); + + dev = upriv->dev; + mutex_lock(&upriv->mtx); + + upriv->udev = NULL; /* No timer will be rearmed from here */ + + usb_kill_urb(upriv->read_urb); + + spin_lock_irqsave(&upriv->req_lock, flags); + list_for_each_safe(item, tmp_item, &upriv->req_active) { + struct request_context *ctx; + int err; + + ctx = list_entry(item, struct request_context, list); + atomic_inc(&ctx->refcount); + + ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; + err = usb_unlink_urb(ctx->outurb); + + spin_unlock_irqrestore(&upriv->req_lock, flags); + if (err == -EINPROGRESS) + wait_for_completion(&ctx->done); + + del_timer_sync(&ctx->timer); + /* FIXME: there is an slight chance for the irq handler to + * be running */ + if (!list_empty(&ctx->list)) + ezusb_ctx_complete(ctx); + + ezusb_request_context_put(ctx); + spin_lock_irqsave(&upriv->req_lock, flags); + } + spin_unlock_irqrestore(&upriv->req_lock, flags); + + list_for_each_safe(item, tmp_item, &upriv->req_pending) + ezusb_ctx_complete(list_entry(item, + struct request_context, list)); + + if (upriv->read_urb && upriv->read_urb->status == -EINPROGRESS) + printk(KERN_ERR PFX "Some URB in progress\n"); + + mutex_unlock(&upriv->mtx); + + if (upriv->read_urb) { + kfree(upriv->read_urb->transfer_buffer); + usb_free_urb(upriv->read_urb); + } + kfree(upriv->bap_buf); + if (upriv->dev) { + struct orinoco_private *priv = ndev_priv(upriv->dev); + orinoco_if_del(priv); + wiphy_unregister(priv_to_wiphy(upriv)); + free_orinocodev(priv); + } +} + +static void ezusb_lock_irqsave(spinlock_t *lock, + unsigned long *flags) __acquires(lock) +{ + spin_lock_bh(lock); +} + +static void ezusb_unlock_irqrestore(spinlock_t *lock, + unsigned long *flags) __releases(lock) +{ + spin_unlock_bh(lock); +} + +static void ezusb_lock_irq(spinlock_t *lock) __acquires(lock) +{ + spin_lock_bh(lock); +} + +static void ezusb_unlock_irq(spinlock_t *lock) __releases(lock) +{ + spin_unlock_bh(lock); +} + +static const struct hermes_ops ezusb_ops = { + .init = ezusb_init, + .cmd_wait = ezusb_docmd_wait, + .init_cmd_wait = ezusb_doicmd_wait, + .allocate = ezusb_allocate, + .read_ltv = ezusb_read_ltv, + .write_ltv = ezusb_write_ltv, + .bap_pread = ezusb_bap_pread, + .read_pda = ezusb_read_pda, + .program_init = ezusb_program_init, + .program_end = ezusb_program_end, + .program = ezusb_program, + .lock_irqsave = ezusb_lock_irqsave, + .unlock_irqrestore = ezusb_unlock_irqrestore, + .lock_irq = ezusb_lock_irq, + .unlock_irq = ezusb_unlock_irq, +}; + +static const struct net_device_ops ezusb_netdev_ops = { + .ndo_open = orinoco_open, + .ndo_stop = orinoco_stop, + .ndo_start_xmit = ezusb_xmit, + .ndo_set_rx_mode = orinoco_set_multicast_list, + .ndo_change_mtu = orinoco_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_tx_timeout = orinoco_tx_timeout, + .ndo_get_stats = orinoco_get_stats, +}; + +static int ezusb_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct orinoco_private *priv; + struct hermes *hw; + struct ezusb_priv *upriv = NULL; + struct usb_interface_descriptor *iface_desc; + struct usb_endpoint_descriptor *ep; + const struct firmware *fw_entry = NULL; + int retval = 0; + int i; + + priv = alloc_orinocodev(sizeof(*upriv), &udev->dev, + ezusb_hard_reset, NULL); + if (!priv) { + err("Couldn't allocate orinocodev"); + retval = -ENOMEM; + goto exit; + } + + hw = &priv->hw; + + upriv = priv->card; + + mutex_init(&upriv->mtx); + spin_lock_init(&upriv->reply_count_lock); + + spin_lock_init(&upriv->req_lock); + INIT_LIST_HEAD(&upriv->req_pending); + INIT_LIST_HEAD(&upriv->req_active); + + upriv->udev = udev; + + hw->iobase = (void __force __iomem *) &upriv->hermes_reg_fake; + hw->reg_spacing = HERMES_16BIT_REGSPACING; + hw->priv = upriv; + hw->ops = &ezusb_ops; + + /* set up the endpoint information */ + /* check out the endpoints */ + + iface_desc = &interface->altsetting[0].desc; + for (i = 0; i < iface_desc->bNumEndpoints; ++i) { + ep = &interface->altsetting[0].endpoint[i].desc; + + if (usb_endpoint_is_bulk_in(ep)) { + /* we found a bulk in endpoint */ + if (upriv->read_urb != NULL) { + pr_warn("Found a second bulk in ep, ignored\n"); + continue; + } + + upriv->read_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!upriv->read_urb) { + err("No free urbs available"); + goto error; + } + if (le16_to_cpu(ep->wMaxPacketSize) != 64) + pr_warn("bulk in: wMaxPacketSize!= 64\n"); + if (ep->bEndpointAddress != (2 | USB_DIR_IN)) + pr_warn("bulk in: bEndpointAddress: %d\n", + ep->bEndpointAddress); + upriv->read_pipe = usb_rcvbulkpipe(udev, + ep-> + bEndpointAddress); + upriv->read_urb->transfer_buffer = + kmalloc(BULK_BUF_SIZE, GFP_KERNEL); + if (!upriv->read_urb->transfer_buffer) { + err("Couldn't allocate IN buffer"); + goto error; + } + } + + if (usb_endpoint_is_bulk_out(ep)) { + /* we found a bulk out endpoint */ + if (upriv->bap_buf != NULL) { + pr_warn("Found a second bulk out ep, ignored\n"); + continue; + } + + if (le16_to_cpu(ep->wMaxPacketSize) != 64) + pr_warn("bulk out: wMaxPacketSize != 64\n"); + if (ep->bEndpointAddress != 2) + pr_warn("bulk out: bEndpointAddress: %d\n", + ep->bEndpointAddress); + upriv->write_pipe = usb_sndbulkpipe(udev, + ep-> + bEndpointAddress); + upriv->bap_buf = kmalloc(BULK_BUF_SIZE, GFP_KERNEL); + if (!upriv->bap_buf) { + err("Couldn't allocate bulk_out_buffer"); + goto error; + } + } + } + if (!upriv->bap_buf || !upriv->read_urb) { + err("Didn't find the required bulk endpoints"); + goto error; + } + + if (reject_firmware(&fw_entry, "/*(DEBLOBBED)*/", + &interface->dev) == 0) { + firmware.size = fw_entry->size; + firmware.code = fw_entry->data; + } + if (firmware.size && firmware.code) { + if (ezusb_firmware_download(upriv, &firmware) < 0) + goto error; + } else { + err("No firmware to download"); + goto error; + } + + if (ezusb_hard_reset(priv) < 0) { + err("Cannot reset the device"); + goto error; + } + + /* If the firmware is already downloaded orinoco.c will call + * ezusb_init but if the firmware is not already there, that will make + * the kernel very unstable, so we try initializing here and quit in + * case of error */ + if (ezusb_init(hw) < 0) { + err("Couldn't initialize the device"); + err("Firmware may not be downloaded or may be wrong."); + goto error; + } + + /* Initialise the main driver */ + if (orinoco_init(priv) != 0) { + err("orinoco_init() failed\n"); + goto error; + } + + if (orinoco_if_add(priv, 0, 0, &ezusb_netdev_ops) != 0) { + upriv->dev = NULL; + err("%s: orinoco_if_add() failed", __func__); + wiphy_unregister(priv_to_wiphy(priv)); + goto error; + } + upriv->dev = priv->ndev; + + goto exit; + + error: + ezusb_delete(upriv); + if (upriv->dev) { + /* upriv->dev was 0, so ezusb_delete() didn't free it */ + free_orinocodev(priv); + } + upriv = NULL; + retval = -EFAULT; + exit: + if (fw_entry) { + firmware.code = NULL; + firmware.size = 0; + release_firmware(fw_entry); + } + usb_set_intfdata(interface, upriv); + return retval; +} + + +static void ezusb_disconnect(struct usb_interface *intf) +{ + struct ezusb_priv *upriv = usb_get_intfdata(intf); + usb_set_intfdata(intf, NULL); + ezusb_delete(upriv); + printk(KERN_INFO PFX "Disconnected\n"); +} + + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver orinoco_driver = { + .name = DRIVER_NAME, + .probe = ezusb_probe, + .disconnect = ezusb_disconnect, + .id_table = ezusb_table, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(orinoco_driver); + +MODULE_AUTHOR("Manuel Estrada Sainz"); +MODULE_DESCRIPTION("Driver for Orinoco wireless LAN cards using EZUSB bridge"); +MODULE_LICENSE("Dual MPL/GPL"); diff --git a/drivers/net/wireless/intersil/orinoco/scan.c b/drivers/net/wireless/intersil/orinoco/scan.c new file mode 100644 index 000000000..2c66166ad --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/scan.c @@ -0,0 +1,251 @@ +/* Helpers for managing scan queues + * + * See copyright notice in main.c + */ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/ieee80211.h> +#include <net/cfg80211.h> + +#include "hermes.h" +#include "orinoco.h" +#include "main.h" + +#include "scan.h" + +#define ZERO_DBM_OFFSET 0x95 +#define MAX_SIGNAL_LEVEL 0x8A +#define MIN_SIGNAL_LEVEL 0x2F + +#define SIGNAL_TO_DBM(x) \ + (clamp_t(s32, (x), MIN_SIGNAL_LEVEL, MAX_SIGNAL_LEVEL) \ + - ZERO_DBM_OFFSET) +#define SIGNAL_TO_MBM(x) (SIGNAL_TO_DBM(x) * 100) + +static int symbol_build_supp_rates(u8 *buf, const __le16 *rates) +{ + int i; + u8 rate; + + buf[0] = WLAN_EID_SUPP_RATES; + for (i = 0; i < 5; i++) { + rate = le16_to_cpu(rates[i]); + /* NULL terminated */ + if (rate == 0x0) + break; + buf[i + 2] = rate; + } + buf[1] = i; + + return i + 2; +} + +static int prism_build_supp_rates(u8 *buf, const u8 *rates) +{ + int i; + + buf[0] = WLAN_EID_SUPP_RATES; + for (i = 0; i < 8; i++) { + /* NULL terminated */ + if (rates[i] == 0x0) + break; + buf[i + 2] = rates[i]; + } + buf[1] = i; + + /* We might still have another 2 rates, which need to go in + * extended supported rates */ + if (i == 8 && rates[i] > 0) { + buf[10] = WLAN_EID_EXT_SUPP_RATES; + for (; i < 10; i++) { + /* NULL terminated */ + if (rates[i] == 0x0) + break; + buf[i + 2] = rates[i]; + } + buf[11] = i - 8; + } + + return (i < 8) ? i + 2 : i + 4; +} + +static void orinoco_add_hostscan_result(struct orinoco_private *priv, + const union hermes_scan_info *bss) +{ + struct wiphy *wiphy = priv_to_wiphy(priv); + struct ieee80211_channel *channel; + struct cfg80211_bss *cbss; + u8 *ie; + u8 ie_buf[46]; + u64 timestamp; + s32 signal; + u16 capability; + u16 beacon_interval; + int ie_len; + int freq; + int len; + + len = le16_to_cpu(bss->a.essid_len); + + /* Reconstruct SSID and bitrate IEs to pass up */ + ie_buf[0] = WLAN_EID_SSID; + ie_buf[1] = len; + memcpy(&ie_buf[2], bss->a.essid, len); + + ie = ie_buf + len + 2; + ie_len = ie_buf[1] + 2; + switch (priv->firmware_type) { + case FIRMWARE_TYPE_SYMBOL: + ie_len += symbol_build_supp_rates(ie, bss->s.rates); + break; + + case FIRMWARE_TYPE_INTERSIL: + ie_len += prism_build_supp_rates(ie, bss->p.rates); + break; + + case FIRMWARE_TYPE_AGERE: + default: + break; + } + + freq = ieee80211_channel_to_frequency( + le16_to_cpu(bss->a.channel), IEEE80211_BAND_2GHZ); + channel = ieee80211_get_channel(wiphy, freq); + if (!channel) { + printk(KERN_DEBUG "Invalid channel designation %04X(%04X)", + bss->a.channel, freq); + return; /* Then ignore it for now */ + } + timestamp = 0; + capability = le16_to_cpu(bss->a.capabilities); + beacon_interval = le16_to_cpu(bss->a.beacon_interv); + signal = SIGNAL_TO_MBM(le16_to_cpu(bss->a.level)); + + cbss = cfg80211_inform_bss(wiphy, channel, CFG80211_BSS_FTYPE_UNKNOWN, + bss->a.bssid, timestamp, capability, + beacon_interval, ie_buf, ie_len, signal, + GFP_KERNEL); + cfg80211_put_bss(wiphy, cbss); +} + +void orinoco_add_extscan_result(struct orinoco_private *priv, + struct agere_ext_scan_info *bss, + size_t len) +{ + struct wiphy *wiphy = priv_to_wiphy(priv); + struct ieee80211_channel *channel; + struct cfg80211_bss *cbss; + const u8 *ie; + u64 timestamp; + s32 signal; + u16 capability; + u16 beacon_interval; + size_t ie_len; + int chan, freq; + + ie_len = len - sizeof(*bss); + ie = cfg80211_find_ie(WLAN_EID_DS_PARAMS, bss->data, ie_len); + chan = ie ? ie[2] : 0; + freq = ieee80211_channel_to_frequency(chan, IEEE80211_BAND_2GHZ); + channel = ieee80211_get_channel(wiphy, freq); + + timestamp = le64_to_cpu(bss->timestamp); + capability = le16_to_cpu(bss->capabilities); + beacon_interval = le16_to_cpu(bss->beacon_interval); + ie = bss->data; + signal = SIGNAL_TO_MBM(bss->level); + + cbss = cfg80211_inform_bss(wiphy, channel, CFG80211_BSS_FTYPE_UNKNOWN, + bss->bssid, timestamp, capability, + beacon_interval, ie, ie_len, signal, + GFP_KERNEL); + cfg80211_put_bss(wiphy, cbss); +} + +void orinoco_add_hostscan_results(struct orinoco_private *priv, + unsigned char *buf, + size_t len) +{ + int offset; /* In the scan data */ + size_t atom_len; + bool abort = false; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + atom_len = sizeof(struct agere_scan_apinfo); + offset = 0; + break; + + case FIRMWARE_TYPE_SYMBOL: + /* Lack of documentation necessitates this hack. + * Different firmwares have 68 or 76 byte long atoms. + * We try modulo first. If the length divides by both, + * we check what would be the channel in the second + * frame for a 68-byte atom. 76-byte atoms have 0 there. + * Valid channel cannot be 0. */ + if (len % 76) + atom_len = 68; + else if (len % 68) + atom_len = 76; + else if (len >= 1292 && buf[68] == 0) + atom_len = 76; + else + atom_len = 68; + offset = 0; + break; + + case FIRMWARE_TYPE_INTERSIL: + offset = 4; + if (priv->has_hostscan) { + atom_len = le16_to_cpup((__le16 *)buf); + /* Sanity check for atom_len */ + if (atom_len < sizeof(struct prism2_scan_apinfo)) { + printk(KERN_ERR "%s: Invalid atom_len in scan " + "data: %zu\n", priv->ndev->name, + atom_len); + abort = true; + goto scan_abort; + } + } else + atom_len = offsetof(struct prism2_scan_apinfo, atim); + break; + + default: + abort = true; + goto scan_abort; + } + + /* Check that we got an whole number of atoms */ + if ((len - offset) % atom_len) { + printk(KERN_ERR "%s: Unexpected scan data length %zu, " + "atom_len %zu, offset %d\n", priv->ndev->name, len, + atom_len, offset); + abort = true; + goto scan_abort; + } + + /* Process the entries one by one */ + for (; offset + atom_len <= len; offset += atom_len) { + union hermes_scan_info *atom; + + atom = (union hermes_scan_info *) (buf + offset); + + orinoco_add_hostscan_result(priv, atom); + } + + scan_abort: + if (priv->scan_request) { + cfg80211_scan_done(priv->scan_request, abort); + priv->scan_request = NULL; + } +} + +void orinoco_scan_done(struct orinoco_private *priv, bool abort) +{ + if (priv->scan_request) { + cfg80211_scan_done(priv->scan_request, abort); + priv->scan_request = NULL; + } +} diff --git a/drivers/net/wireless/intersil/orinoco/scan.h b/drivers/net/wireless/intersil/orinoco/scan.h new file mode 100644 index 000000000..27281fb0a --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/scan.h @@ -0,0 +1,21 @@ +/* Helpers for managing scan queues + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_SCAN_H_ +#define _ORINOCO_SCAN_H_ + +/* Forward declarations */ +struct orinoco_private; +struct agere_ext_scan_info; + +/* Add scan results */ +void orinoco_add_extscan_result(struct orinoco_private *priv, + struct agere_ext_scan_info *atom, + size_t len); +void orinoco_add_hostscan_results(struct orinoco_private *dev, + unsigned char *buf, + size_t len); +void orinoco_scan_done(struct orinoco_private *priv, bool abort); + +#endif /* _ORINOCO_SCAN_H_ */ diff --git a/drivers/net/wireless/intersil/orinoco/spectrum_cs.c b/drivers/net/wireless/intersil/orinoco/spectrum_cs.c new file mode 100644 index 000000000..b60048c95 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/spectrum_cs.c @@ -0,0 +1,320 @@ +/* + * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as + * Symbol Wireless Networker LA4137, CompactFlash cards by Socket + * Communications and Intel PRO/Wireless 2011B. + * + * The driver implements Symbol firmware download. The rest is handled + * in hermes.c and main.c. + * + * Utilities for downloading the Symbol firmware are available at + * http://sourceforge.net/projects/orinoco/ + * + * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org> + * Portions based on orinoco_cs.c: + * Copyright (C) David Gibson, Linuxcare Australia + * Portions based on Spectrum24tDnld.c from original spectrum24 driver: + * Copyright (C) Symbol Technologies. + * + * See copyright notice in file main.c. + */ + +#define DRIVER_NAME "spectrum_cs" +#define PFX DRIVER_NAME ": " + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> + +#include "orinoco.h" + +/********************************************************************/ +/* Module stuff */ +/********************************************************************/ + +MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"); +MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* Module parameters */ + +/* Some D-Link cards have buggy CIS. They do work at 5v properly, but + * don't have any CIS entry for it. This workaround it... */ +static int ignore_cis_vcc; /* = 0 */ +module_param(ignore_cis_vcc, int, 0); +MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); + +/********************************************************************/ +/* Data structures */ +/********************************************************************/ + +/* PCMCIA specific device information (goes in the card field of + * struct orinoco_private */ +struct orinoco_pccard { + struct pcmcia_device *p_dev; +}; + +/********************************************************************/ +/* Function prototypes */ +/********************************************************************/ + +static int spectrum_cs_config(struct pcmcia_device *link); +static void spectrum_cs_release(struct pcmcia_device *link); + +/* Constants for the CISREG_CCSR register */ +#define HCR_RUN 0x07 /* run firmware after reset */ +#define HCR_IDLE 0x0E /* don't run firmware after reset */ +#define HCR_MEM16 0x10 /* memory width bit, should be preserved */ + + +/* + * Reset the card using configuration registers COR and CCSR. + * If IDLE is 1, stop the firmware, so that it can be safely rewritten. + */ +static int +spectrum_reset(struct pcmcia_device *link, int idle) +{ + int ret; + u8 save_cor; + u8 ccsr; + + /* Doing it if hardware is gone is guaranteed crash */ + if (!pcmcia_dev_present(link)) + return -ENODEV; + + /* Save original COR value */ + ret = pcmcia_read_config_byte(link, CISREG_COR, &save_cor); + if (ret) + goto failed; + + /* Soft-Reset card */ + ret = pcmcia_write_config_byte(link, CISREG_COR, + (save_cor | COR_SOFT_RESET)); + if (ret) + goto failed; + udelay(1000); + + /* Read CCSR */ + ret = pcmcia_read_config_byte(link, CISREG_CCSR, &ccsr); + if (ret) + goto failed; + + /* + * Start or stop the firmware. Memory width bit should be + * preserved from the value we've just read. + */ + ccsr = (idle ? HCR_IDLE : HCR_RUN) | (ccsr & HCR_MEM16); + ret = pcmcia_write_config_byte(link, CISREG_CCSR, ccsr); + if (ret) + goto failed; + udelay(1000); + + /* Restore original COR configuration index */ + ret = pcmcia_write_config_byte(link, CISREG_COR, + (save_cor & ~COR_SOFT_RESET)); + if (ret) + goto failed; + udelay(1000); + return 0; + +failed: + return -ENODEV; +} + +/********************************************************************/ +/* Device methods */ +/********************************************************************/ + +static int +spectrum_cs_hard_reset(struct orinoco_private *priv) +{ + struct orinoco_pccard *card = priv->card; + struct pcmcia_device *link = card->p_dev; + + /* Soft reset using COR and HCR */ + spectrum_reset(link, 0); + + return 0; +} + +static int +spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) +{ + struct orinoco_pccard *card = priv->card; + struct pcmcia_device *link = card->p_dev; + + return spectrum_reset(link, idle); +} + +/********************************************************************/ +/* PCMCIA stuff */ +/********************************************************************/ + +static int +spectrum_cs_probe(struct pcmcia_device *link) +{ + struct orinoco_private *priv; + struct orinoco_pccard *card; + + priv = alloc_orinocodev(sizeof(*card), &link->dev, + spectrum_cs_hard_reset, + spectrum_cs_stop_firmware); + if (!priv) + return -ENOMEM; + card = priv->card; + + /* Link both structures together */ + card->p_dev = link; + link->priv = priv; + + return spectrum_cs_config(link); +} /* spectrum_cs_attach */ + +static void spectrum_cs_detach(struct pcmcia_device *link) +{ + struct orinoco_private *priv = link->priv; + + orinoco_if_del(priv); + + spectrum_cs_release(link); + + free_orinocodev(priv); +} /* spectrum_cs_detach */ + +static int spectrum_cs_config_check(struct pcmcia_device *p_dev, + void *priv_data) +{ + if (p_dev->config_index == 0) + return -EINVAL; + + return pcmcia_request_io(p_dev); +}; + +static int +spectrum_cs_config(struct pcmcia_device *link) +{ + struct orinoco_private *priv = link->priv; + struct hermes *hw = &priv->hw; + int ret; + void __iomem *mem; + + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; + ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); + if (ret) { + if (!ignore_cis_vcc) + printk(KERN_ERR PFX "GetNextTuple(): No matching " + "CIS configuration. Maybe you need the " + "ignore_cis_vcc=1 parameter.\n"); + goto failed; + } + + mem = ioport_map(link->resource[0]->start, + resource_size(link->resource[0])); + if (!mem) + goto failed; + + /* We initialize the hermes structure before completing PCMCIA + * configuration just in case the interrupt handler gets + * called. */ + hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); + hw->eeprom_pda = true; + + ret = pcmcia_request_irq(link, orinoco_interrupt); + if (ret) + goto failed; + + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + /* Reset card */ + if (spectrum_cs_hard_reset(priv) != 0) + goto failed; + + /* Initialise the main driver */ + if (orinoco_init(priv) != 0) { + printk(KERN_ERR PFX "orinoco_init() failed\n"); + goto failed; + } + + /* Register an interface with the stack */ + if (orinoco_if_add(priv, link->resource[0]->start, + link->irq, NULL) != 0) { + printk(KERN_ERR PFX "orinoco_if_add() failed\n"); + goto failed; + } + + return 0; + + failed: + spectrum_cs_release(link); + return -ENODEV; +} /* spectrum_cs_config */ + +static void +spectrum_cs_release(struct pcmcia_device *link) +{ + struct orinoco_private *priv = link->priv; + unsigned long flags; + + /* We're committed to taking the device away now, so mark the + * hardware as unavailable */ + priv->hw.ops->lock_irqsave(&priv->lock, &flags); + priv->hw_unavailable++; + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); + + pcmcia_disable_device(link); + if (priv->hw.iobase) + ioport_unmap(priv->hw.iobase); +} /* spectrum_cs_release */ + + +static int +spectrum_cs_suspend(struct pcmcia_device *link) +{ + struct orinoco_private *priv = link->priv; + int err = 0; + + /* Mark the device as stopped, to block IO until later */ + orinoco_down(priv); + + return err; +} + +static int +spectrum_cs_resume(struct pcmcia_device *link) +{ + struct orinoco_private *priv = link->priv; + int err = orinoco_up(priv); + + return err; +} + + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +static const struct pcmcia_device_id spectrum_cs_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */ + PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ + PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */ + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); + +static struct pcmcia_driver orinoco_driver = { + .owner = THIS_MODULE, + .name = DRIVER_NAME, + .probe = spectrum_cs_probe, + .remove = spectrum_cs_detach, + .suspend = spectrum_cs_suspend, + .resume = spectrum_cs_resume, + .id_table = spectrum_cs_ids, +}; +module_pcmcia_driver(orinoco_driver); diff --git a/drivers/net/wireless/intersil/orinoco/wext.c b/drivers/net/wireless/intersil/orinoco/wext.c new file mode 100644 index 000000000..1d4dae422 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/wext.c @@ -0,0 +1,1413 @@ +/* Wireless extensions support. + * + * See copyright notice in main.c + */ +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/if_arp.h> +#include <linux/wireless.h> +#include <linux/ieee80211.h> +#include <linux/etherdevice.h> +#include <net/iw_handler.h> +#include <net/cfg80211.h> +#include <net/cfg80211-wext.h> + +#include "hermes.h" +#include "hermes_rid.h" +#include "orinoco.h" + +#include "hw.h" +#include "mic.h" +#include "scan.h" +#include "main.h" + +#include "wext.h" + +#define MAX_RID_LEN 1024 + +/* Helper routine to record keys + * It is called under orinoco_lock so it may not sleep */ +static int orinoco_set_key(struct orinoco_private *priv, int index, + enum orinoco_alg alg, const u8 *key, int key_len, + const u8 *seq, int seq_len) +{ + kzfree(priv->keys[index].key); + kzfree(priv->keys[index].seq); + + if (key_len) { + priv->keys[index].key = kzalloc(key_len, GFP_ATOMIC); + if (!priv->keys[index].key) + goto nomem; + } else + priv->keys[index].key = NULL; + + if (seq_len) { + priv->keys[index].seq = kzalloc(seq_len, GFP_ATOMIC); + if (!priv->keys[index].seq) + goto free_key; + } else + priv->keys[index].seq = NULL; + + priv->keys[index].key_len = key_len; + priv->keys[index].seq_len = seq_len; + + if (key_len) + memcpy((void *)priv->keys[index].key, key, key_len); + if (seq_len) + memcpy((void *)priv->keys[index].seq, seq, seq_len); + + switch (alg) { + case ORINOCO_ALG_TKIP: + priv->keys[index].cipher = WLAN_CIPHER_SUITE_TKIP; + break; + + case ORINOCO_ALG_WEP: + priv->keys[index].cipher = (key_len > SMALL_KEY_SIZE) ? + WLAN_CIPHER_SUITE_WEP104 : WLAN_CIPHER_SUITE_WEP40; + break; + + case ORINOCO_ALG_NONE: + default: + priv->keys[index].cipher = 0; + break; + } + + return 0; + +free_key: + kfree(priv->keys[index].key); + priv->keys[index].key = NULL; + +nomem: + priv->keys[index].key_len = 0; + priv->keys[index].seq_len = 0; + priv->keys[index].cipher = 0; + + return -ENOMEM; +} + +static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + struct iw_statistics *wstats = &priv->wstats; + int err; + unsigned long flags; + + if (!netif_device_present(dev)) { + printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", + dev->name); + return NULL; /* FIXME: Can we do better than this? */ + } + + /* If busy, return the old stats. Returning NULL may cause + * the interface to disappear from /proc/net/wireless */ + if (orinoco_lock(priv, &flags) != 0) + return wstats; + + /* We can't really wait for the tallies inquiry command to + * complete, so we just use the previous results and trigger + * a new tallies inquiry command for next time - Jean II */ + /* FIXME: Really we should wait for the inquiry to come back - + * as it is the stats we give don't make a whole lot of sense. + * Unfortunately, it's not clear how to do that within the + * wireless extensions framework: I think we're in user + * context, but a lock seems to be held by the time we get in + * here so we're not safe to sleep here. */ + hermes_inquire(hw, HERMES_INQ_TALLIES); + + if (priv->iw_mode == NL80211_IFTYPE_ADHOC) { + memset(&wstats->qual, 0, sizeof(wstats->qual)); + /* If a spy address is defined, we report stats of the + * first spy address - Jean II */ + if (SPY_NUMBER(priv)) { + wstats->qual.qual = priv->spy_data.spy_stat[0].qual; + wstats->qual.level = priv->spy_data.spy_stat[0].level; + wstats->qual.noise = priv->spy_data.spy_stat[0].noise; + wstats->qual.updated = + priv->spy_data.spy_stat[0].updated; + } + } else { + struct { + __le16 qual, signal, noise, unused; + } __packed cq; + + err = HERMES_READ_RECORD(hw, USER_BAP, + HERMES_RID_COMMSQUALITY, &cq); + + if (!err) { + wstats->qual.qual = (int)le16_to_cpu(cq.qual); + wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; + wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; + wstats->qual.updated = + IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; + } + } + + orinoco_unlock(priv, &flags); + return wstats; +} + +/********************************************************************/ +/* Wireless extensions */ +/********************************************************************/ + +static int orinoco_ioctl_setwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Enable automatic roaming - no sanity checks are needed */ + if (is_zero_ether_addr(ap_addr->sa_data) || + is_broadcast_ether_addr(ap_addr->sa_data)) { + priv->bssid_fixed = 0; + eth_zero_addr(priv->desired_bssid); + + /* "off" means keep existing connection */ + if (ap_addr->sa_data[0] == 0) { + __orinoco_hw_set_wap(priv); + err = 0; + } + goto out; + } + + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) { + printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't " + "support manual roaming\n", + dev->name); + err = -EOPNOTSUPP; + goto out; + } + + if (priv->iw_mode != NL80211_IFTYPE_STATION) { + printk(KERN_WARNING "%s: Manual roaming supported only in " + "managed mode\n", dev->name); + err = -EOPNOTSUPP; + goto out; + } + + /* Intersil firmware hangs without Desired ESSID */ + if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL && + strlen(priv->desired_essid) == 0) { + printk(KERN_WARNING "%s: Desired ESSID must be set for " + "manual roaming\n", dev->name); + err = -EOPNOTSUPP; + goto out; + } + + /* Finally, enable manual roaming */ + priv->bssid_fixed = 1; + memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN); + + out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_getwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + ap_addr->sa_family = ARPHRD_ETHER; + err = orinoco_hw_get_current_bssid(priv, ap_addr->sa_data); + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_setiwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *keybuf) +{ + struct orinoco_private *priv = ndev_priv(dev); + int index = (erq->flags & IW_ENCODE_INDEX) - 1; + int setindex = priv->tx_key; + enum orinoco_alg encode_alg = priv->encode_alg; + int restricted = priv->wep_restrict; + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; + + if (!priv->has_wep) + return -EOPNOTSUPP; + + if (erq->pointer) { + /* We actually have a key to set - check its length */ + if (erq->length > LARGE_KEY_SIZE) + return -E2BIG; + + if ((erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep) + return -E2BIG; + } + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Clear any TKIP key we have */ + if ((priv->has_wpa) && (priv->encode_alg == ORINOCO_ALG_TKIP)) + (void) orinoco_clear_tkip_key(priv, setindex); + + if (erq->length > 0) { + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) + index = priv->tx_key; + + /* Switch on WEP if off */ + if (encode_alg != ORINOCO_ALG_WEP) { + setindex = index; + encode_alg = ORINOCO_ALG_WEP; + } + } else { + /* Important note : if the user do "iwconfig eth0 enc off", + * we will arrive there with an index of -1. This is valid + * but need to be taken care off... Jean II */ + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { + if ((index != -1) || (erq->flags == 0)) { + err = -EINVAL; + goto out; + } + } else { + /* Set the index : Check that the key is valid */ + if (priv->keys[index].key_len == 0) { + err = -EINVAL; + goto out; + } + setindex = index; + } + } + + if (erq->flags & IW_ENCODE_DISABLED) + encode_alg = ORINOCO_ALG_NONE; + if (erq->flags & IW_ENCODE_OPEN) + restricted = 0; + if (erq->flags & IW_ENCODE_RESTRICTED) + restricted = 1; + + if (erq->pointer && erq->length > 0) { + err = orinoco_set_key(priv, index, ORINOCO_ALG_WEP, keybuf, + erq->length, NULL, 0); + } + priv->tx_key = setindex; + + /* Try fast key change if connected and only keys are changed */ + if ((priv->encode_alg == encode_alg) && + (priv->wep_restrict == restricted) && + netif_carrier_ok(dev)) { + err = __orinoco_hw_setup_wepkeys(priv); + /* No need to commit if successful */ + goto out; + } + + priv->encode_alg = encode_alg; + priv->wep_restrict = restricted; + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getiwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *keybuf) +{ + struct orinoco_private *priv = ndev_priv(dev); + int index = (erq->flags & IW_ENCODE_INDEX) - 1; + unsigned long flags; + + if (!priv->has_wep) + return -EOPNOTSUPP; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) + index = priv->tx_key; + + erq->flags = 0; + if (!priv->encode_alg) + erq->flags |= IW_ENCODE_DISABLED; + erq->flags |= index + 1; + + if (priv->wep_restrict) + erq->flags |= IW_ENCODE_RESTRICTED; + else + erq->flags |= IW_ENCODE_OPEN; + + erq->length = priv->keys[index].key_len; + + memcpy(keybuf, priv->keys[index].key, erq->length); + + orinoco_unlock(priv, &flags); + return 0; +} + +static int orinoco_ioctl_setessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *essidbuf) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + + /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it + * anyway... - Jean II */ + + /* Hum... Should not use Wireless Extension constant (may change), + * should use our own... - Jean II */ + if (erq->length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */ + memset(priv->desired_essid, 0, sizeof(priv->desired_essid)); + + /* If not ANY, get the new ESSID */ + if (erq->flags) + memcpy(priv->desired_essid, essidbuf, erq->length); + + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *essidbuf) +{ + struct orinoco_private *priv = ndev_priv(dev); + int active; + int err = 0; + unsigned long flags; + + if (netif_running(dev)) { + err = orinoco_hw_get_essid(priv, &active, essidbuf); + if (err < 0) + return err; + erq->length = err; + } else { + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE); + erq->length = strlen(priv->desired_essid); + orinoco_unlock(priv, &flags); + } + + erq->flags = 1; + + return 0; +} + +static int orinoco_ioctl_setfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *frq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int chan = -1; + unsigned long flags; + int err = -EINPROGRESS; /* Call commit handler */ + + /* In infrastructure mode the AP sets the channel */ + if (priv->iw_mode == NL80211_IFTYPE_STATION) + return -EBUSY; + + if ((frq->e == 0) && (frq->m <= 1000)) { + /* Setting by channel number */ + chan = frq->m; + } else { + /* Setting by frequency */ + int denom = 1; + int i; + + /* Calculate denominator to rescale to MHz */ + for (i = 0; i < (6 - frq->e); i++) + denom *= 10; + + chan = ieee80211_frequency_to_channel(frq->m / denom); + } + + if ((chan < 1) || (chan > NUM_CHANNELS) || + !(priv->channel_mask & (1 << (chan - 1)))) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->channel = chan; + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { + /* Fast channel change - no commit if successful */ + struct hermes *hw = &priv->hw; + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_SET_CHANNEL, + chan, NULL); + } + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *frq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int tmp; + + /* Locking done in there */ + tmp = orinoco_hw_get_freq(priv); + if (tmp < 0) + return tmp; + + frq->m = tmp * 100000; + frq->e = 1; + + return 0; +} + +static int orinoco_ioctl_getsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *srq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + u16 val; + int err; + unsigned long flags; + + if (!priv->has_sensitivity) + return -EOPNOTSUPP; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFSYSTEMSCALE, &val); + orinoco_unlock(priv, &flags); + + if (err) + return err; + + srq->value = val; + srq->fixed = 0; /* auto */ + + return 0; +} + +static int orinoco_ioctl_setsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *srq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int val = srq->value; + unsigned long flags; + + if (!priv->has_sensitivity) + return -EOPNOTSUPP; + + if ((val < 1) || (val > 3)) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->ap_density = val; + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_setrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int ratemode; + int bitrate; /* 100s of kilobits */ + unsigned long flags; + + /* As the user space doesn't know our highest rate, it uses -1 + * to ask us to set the highest rate. Test it using "iwconfig + * ethX rate auto" - Jean II */ + if (rrq->value == -1) + bitrate = 110; + else { + if (rrq->value % 100000) + return -EINVAL; + bitrate = rrq->value / 100000; + } + + ratemode = orinoco_get_bitratemode(bitrate, !rrq->fixed); + + if (ratemode == -1) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->bitratemode = ratemode; + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; +} + +static int orinoco_ioctl_getrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int err = 0; + int bitrate, automatic; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + orinoco_get_ratemode_cfg(priv->bitratemode, &bitrate, &automatic); + + /* If the interface is running we try to find more about the + current mode */ + if (netif_running(dev)) { + int act_bitrate; + int lerr; + + /* Ignore errors if we can't get the actual bitrate */ + lerr = orinoco_hw_get_act_bitrate(priv, &act_bitrate); + if (!lerr) + bitrate = act_bitrate; + } + + orinoco_unlock(priv, &flags); + + rrq->value = bitrate; + rrq->fixed = !automatic; + rrq->disabled = 0; + + return err; +} + +static int orinoco_ioctl_setpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *prq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (prq->disabled) { + priv->pm_on = 0; + } else { + switch (prq->flags & IW_POWER_MODE) { + case IW_POWER_UNICAST_R: + priv->pm_mcast = 0; + priv->pm_on = 1; + break; + case IW_POWER_ALL_R: + priv->pm_mcast = 1; + priv->pm_on = 1; + break; + case IW_POWER_ON: + /* No flags : but we may have a value - Jean II */ + break; + default: + err = -EINVAL; + goto out; + } + + if (prq->flags & IW_POWER_TIMEOUT) { + priv->pm_on = 1; + priv->pm_timeout = prq->value / 1000; + } + if (prq->flags & IW_POWER_PERIOD) { + priv->pm_on = 1; + priv->pm_period = prq->value / 1000; + } + /* It's valid to not have a value if we are just toggling + * the flags... Jean II */ + if (!priv->pm_on) { + err = -EINVAL; + goto out; + } + } + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *prq, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + int err = 0; + u16 enable, period, timeout, mcast; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMENABLED, &enable); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, &period); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMULTICASTRECEIVE, &mcast); + if (err) + goto out; + + prq->disabled = !enable; + /* Note : by default, display the period */ + if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { + prq->flags = IW_POWER_TIMEOUT; + prq->value = timeout * 1000; + } else { + prq->flags = IW_POWER_PERIOD; + prq->value = period * 1000; + } + if (mcast) + prq->flags |= IW_POWER_ALL_R; + else + prq->flags |= IW_POWER_UNICAST_R; + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_set_encodeext(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, alg = ext->alg, set_key = 1; + unsigned long flags; + int err = -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Determine and validate the key index */ + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if ((idx < 1) || (idx > 4)) + goto out; + idx--; + } else + idx = priv->tx_key; + + if (encoding->flags & IW_ENCODE_DISABLED) + alg = IW_ENCODE_ALG_NONE; + + if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) { + /* Clear any TKIP TX key we had */ + (void) orinoco_clear_tkip_key(priv, priv->tx_key); + } + + if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + priv->tx_key = idx; + set_key = ((alg == IW_ENCODE_ALG_TKIP) || + (ext->key_len > 0)) ? 1 : 0; + } + + if (set_key) { + /* Set the requested key first */ + switch (alg) { + case IW_ENCODE_ALG_NONE: + priv->encode_alg = ORINOCO_ALG_NONE; + err = orinoco_set_key(priv, idx, ORINOCO_ALG_NONE, + NULL, 0, NULL, 0); + break; + + case IW_ENCODE_ALG_WEP: + if (ext->key_len <= 0) + goto out; + + priv->encode_alg = ORINOCO_ALG_WEP; + err = orinoco_set_key(priv, idx, ORINOCO_ALG_WEP, + ext->key, ext->key_len, NULL, 0); + break; + + case IW_ENCODE_ALG_TKIP: + { + u8 *tkip_iv = NULL; + + if (!priv->has_wpa || + (ext->key_len > sizeof(struct orinoco_tkip_key))) + goto out; + + priv->encode_alg = ORINOCO_ALG_TKIP; + + if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) + tkip_iv = &ext->rx_seq[0]; + + err = orinoco_set_key(priv, idx, ORINOCO_ALG_TKIP, + ext->key, ext->key_len, tkip_iv, + ORINOCO_SEQ_LEN); + + err = __orinoco_hw_set_tkip_key(priv, idx, + ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY, + priv->keys[idx].key, + tkip_iv, ORINOCO_SEQ_LEN, NULL, 0); + if (err) + printk(KERN_ERR "%s: Error %d setting TKIP key" + "\n", dev->name, err); + + goto out; + } + default: + goto out; + } + } + err = -EINPROGRESS; + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_get_encodeext(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, max_key_len; + unsigned long flags; + int err; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = -EINVAL; + max_key_len = encoding->length - sizeof(*ext); + if (max_key_len < 0) + goto out; + + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if ((idx < 1) || (idx > 4)) + goto out; + idx--; + } else + idx = priv->tx_key; + + encoding->flags = idx + 1; + memset(ext, 0, sizeof(*ext)); + + switch (priv->encode_alg) { + case ORINOCO_ALG_NONE: + ext->alg = IW_ENCODE_ALG_NONE; + ext->key_len = 0; + encoding->flags |= IW_ENCODE_DISABLED; + break; + case ORINOCO_ALG_WEP: + ext->alg = IW_ENCODE_ALG_WEP; + ext->key_len = min(priv->keys[idx].key_len, max_key_len); + memcpy(ext->key, priv->keys[idx].key, ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + break; + case ORINOCO_ALG_TKIP: + ext->alg = IW_ENCODE_ALG_TKIP; + ext->key_len = min(priv->keys[idx].key_len, max_key_len); + memcpy(ext->key, priv->keys[idx].key, ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + break; + } + + err = 0; + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_set_auth(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + struct iw_param *param = &wrqu->param; + unsigned long flags; + int ret = -EINPROGRESS; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_WPA_VERSION: + case IW_AUTH_CIPHER_PAIRWISE: + case IW_AUTH_CIPHER_GROUP: + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + case IW_AUTH_PRIVACY_INVOKED: + case IW_AUTH_DROP_UNENCRYPTED: + /* + * orinoco does not use these parameters + */ + break; + + case IW_AUTH_MFP: + /* Management Frame Protection not supported. + * Only fail if set to required. + */ + if (param->value == IW_AUTH_MFP_REQUIRED) + ret = -EINVAL; + break; + + case IW_AUTH_KEY_MGMT: + /* wl_lkm implies value 2 == PSK for Hermes I + * which ties in with WEXT + * no other hints tho :( + */ + priv->key_mgmt = param->value; + break; + + case IW_AUTH_TKIP_COUNTERMEASURES: + /* When countermeasures are enabled, shut down the + * card; when disabled, re-enable the card. This must + * take effect immediately. + * + * TODO: Make sure that the EAPOL message is getting + * out before card disabled + */ + if (param->value) { + priv->tkip_cm_active = 1; + ret = hermes_disable_port(hw, 0); + } else { + priv->tkip_cm_active = 0; + ret = hermes_enable_port(hw, 0); + } + break; + + case IW_AUTH_80211_AUTH_ALG: + if (param->value & IW_AUTH_ALG_SHARED_KEY) + priv->wep_restrict = 1; + else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) + priv->wep_restrict = 0; + else + ret = -EINVAL; + break; + + case IW_AUTH_WPA_ENABLED: + if (priv->has_wpa) { + priv->wpa_enabled = param->value ? 1 : 0; + } else { + if (param->value) + ret = -EOPNOTSUPP; + /* else silently accept disable of WPA */ + priv->wpa_enabled = 0; + } + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_get_auth(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct iw_param *param = &wrqu->param; + unsigned long flags; + int ret = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_KEY_MGMT: + param->value = priv->key_mgmt; + break; + + case IW_AUTH_TKIP_COUNTERMEASURES: + param->value = priv->tkip_cm_active; + break; + + case IW_AUTH_80211_AUTH_ALG: + if (priv->wep_restrict) + param->value = IW_AUTH_ALG_SHARED_KEY; + else + param->value = IW_AUTH_ALG_OPEN_SYSTEM; + break; + + case IW_AUTH_WPA_ENABLED: + param->value = priv->wpa_enabled; + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_set_genie(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + u8 *buf; + unsigned long flags; + + /* cut off at IEEE80211_MAX_DATA_LEN */ + if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) || + (wrqu->data.length && (extra == NULL))) + return -EINVAL; + + if (wrqu->data.length) { + buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + } else + buf = NULL; + + if (orinoco_lock(priv, &flags) != 0) { + kfree(buf); + return -EBUSY; + } + + kfree(priv->wpa_ie); + priv->wpa_ie = buf; + priv->wpa_ie_len = wrqu->data.length; + + if (priv->wpa_ie) { + /* Looks like wl_lkm wants to check the auth alg, and + * somehow pass it to the firmware. + * Instead it just calls the key mgmt rid + * - we do this in set auth. + */ + } + + orinoco_unlock(priv, &flags); + return 0; +} + +static int orinoco_ioctl_get_genie(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + int err = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) { + wrqu->data.length = 0; + goto out; + } + + if (wrqu->data.length < priv->wpa_ie_len) { + err = -E2BIG; + goto out; + } + + wrqu->data.length = priv->wpa_ie_len; + memcpy(extra, priv->wpa_ie, priv->wpa_ie_len); + +out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_set_mlme(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct iw_mlme *mlme = (struct iw_mlme *)extra; + unsigned long flags; + int ret = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (mlme->cmd) { + case IW_MLME_DEAUTH: + /* silently ignore */ + break; + + case IW_MLME_DISASSOC: + + ret = orinoco_hw_disassociate(priv, mlme->addr.sa_data, + mlme->reason_code); + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_reset(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) { + printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name); + + /* Firmware reset */ + orinoco_reset(&priv->reset_work); + } else { + printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); + + schedule_work(&priv->reset_work); + } + + return 0; +} + +static int orinoco_ioctl_setibssport(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) + +{ + struct orinoco_private *priv = ndev_priv(dev); + int val = *((int *) extra); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->ibss_port = val; + + /* Actually update the mode we are using */ + set_port_type(priv); + + orinoco_unlock(priv, &flags); + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getibssport(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int *val = (int *) extra; + + *val = priv->ibss_port; + return 0; +} + +static int orinoco_ioctl_setport3(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int val = *((int *) extra); + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (val) { + case 0: /* Try to do IEEE ad-hoc mode */ + if (!priv->has_ibss) { + err = -EINVAL; + break; + } + priv->prefer_port3 = 0; + + break; + + case 1: /* Try to do Lucent proprietary ad-hoc mode */ + if (!priv->has_port3) { + err = -EINVAL; + break; + } + priv->prefer_port3 = 1; + break; + + default: + err = -EINVAL; + } + + if (!err) { + /* Actually update the mode we are using */ + set_port_type(priv); + err = -EINPROGRESS; + } + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getport3(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int *val = (int *) extra; + + *val = priv->prefer_port3; + return 0; +} + +static int orinoco_ioctl_setpreamble(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + int val; + + if (!priv->has_preamble) + return -EOPNOTSUPP; + + /* 802.11b has recently defined some short preamble. + * Basically, the Phy header has been reduced in size. + * This increase performance, especially at high rates + * (the preamble is transmitted at 1Mb/s), unfortunately + * this give compatibility troubles... - Jean II */ + val = *((int *) extra); + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (val) + priv->preamble = 1; + else + priv->preamble = 0; + + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getpreamble(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + int *val = (int *) extra; + + if (!priv->has_preamble) + return -EOPNOTSUPP; + + *val = priv->preamble; + return 0; +} + +/* ioctl interface to hermes_read_ltv() + * To use with iwpriv, pass the RID as the token argument, e.g. + * iwpriv get_rid [0xfc00] + * At least Wireless Tools 25 is required to use iwpriv. + * For Wireless Tools 25 and 26 append "dummy" are the end. */ +static int orinoco_ioctl_getrid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct hermes *hw = &priv->hw; + int rid = data->flags; + u16 length; + int err; + unsigned long flags; + + /* It's a "get" function, but we don't want users to access the + * WEP key and other raw firmware data */ + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (rid < 0xfc00 || rid > 0xffff) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hw->ops->read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, + extra); + if (err) + goto out; + + data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length), + MAX_RID_LEN); + + out: + orinoco_unlock(priv, &flags); + return err; +} + + +/* Commit handler, called after set operations */ +static int orinoco_ioctl_commit(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = ndev_priv(dev); + unsigned long flags; + int err = 0; + + if (!priv->open) + return 0; + + if (orinoco_lock(priv, &flags) != 0) + return err; + + err = orinoco_commit(priv); + + orinoco_unlock(priv, &flags); + return err; +} + +static const struct iw_priv_args orinoco_privtab[] = { + { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, + { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, + { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_port3" }, + { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_port3" }, + { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_preamble" }, + { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_preamble" }, + { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_ibssport" }, + { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_ibssport" }, + { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN, + "get_rid" }, +}; + + +/* + * Structures to export the Wireless Handlers + */ + +static const iw_handler orinoco_handler[] = { + IW_HANDLER(SIOCSIWCOMMIT, (iw_handler)orinoco_ioctl_commit), + IW_HANDLER(SIOCGIWNAME, (iw_handler)cfg80211_wext_giwname), + IW_HANDLER(SIOCSIWFREQ, (iw_handler)orinoco_ioctl_setfreq), + IW_HANDLER(SIOCGIWFREQ, (iw_handler)orinoco_ioctl_getfreq), + IW_HANDLER(SIOCSIWMODE, (iw_handler)cfg80211_wext_siwmode), + IW_HANDLER(SIOCGIWMODE, (iw_handler)cfg80211_wext_giwmode), + IW_HANDLER(SIOCSIWSENS, (iw_handler)orinoco_ioctl_setsens), + IW_HANDLER(SIOCGIWSENS, (iw_handler)orinoco_ioctl_getsens), + IW_HANDLER(SIOCGIWRANGE, (iw_handler)cfg80211_wext_giwrange), + IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy), + IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy), + IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy), + IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy), + IW_HANDLER(SIOCSIWAP, (iw_handler)orinoco_ioctl_setwap), + IW_HANDLER(SIOCGIWAP, (iw_handler)orinoco_ioctl_getwap), + IW_HANDLER(SIOCSIWSCAN, (iw_handler)cfg80211_wext_siwscan), + IW_HANDLER(SIOCGIWSCAN, (iw_handler)cfg80211_wext_giwscan), + IW_HANDLER(SIOCSIWESSID, (iw_handler)orinoco_ioctl_setessid), + IW_HANDLER(SIOCGIWESSID, (iw_handler)orinoco_ioctl_getessid), + IW_HANDLER(SIOCSIWRATE, (iw_handler)orinoco_ioctl_setrate), + IW_HANDLER(SIOCGIWRATE, (iw_handler)orinoco_ioctl_getrate), + IW_HANDLER(SIOCSIWRTS, (iw_handler)cfg80211_wext_siwrts), + IW_HANDLER(SIOCGIWRTS, (iw_handler)cfg80211_wext_giwrts), + IW_HANDLER(SIOCSIWFRAG, (iw_handler)cfg80211_wext_siwfrag), + IW_HANDLER(SIOCGIWFRAG, (iw_handler)cfg80211_wext_giwfrag), + IW_HANDLER(SIOCGIWRETRY, (iw_handler)cfg80211_wext_giwretry), + IW_HANDLER(SIOCSIWENCODE, (iw_handler)orinoco_ioctl_setiwencode), + IW_HANDLER(SIOCGIWENCODE, (iw_handler)orinoco_ioctl_getiwencode), + IW_HANDLER(SIOCSIWPOWER, (iw_handler)orinoco_ioctl_setpower), + IW_HANDLER(SIOCGIWPOWER, (iw_handler)orinoco_ioctl_getpower), + IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie), + IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie), + IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme), + IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth), + IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth), + IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext), + IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext), +}; + + +/* + Added typecasting since we no longer use iwreq_data -- Moustafa + */ +static const iw_handler orinoco_private_handler[] = { + [0] = (iw_handler)orinoco_ioctl_reset, + [1] = (iw_handler)orinoco_ioctl_reset, + [2] = (iw_handler)orinoco_ioctl_setport3, + [3] = (iw_handler)orinoco_ioctl_getport3, + [4] = (iw_handler)orinoco_ioctl_setpreamble, + [5] = (iw_handler)orinoco_ioctl_getpreamble, + [6] = (iw_handler)orinoco_ioctl_setibssport, + [7] = (iw_handler)orinoco_ioctl_getibssport, + [9] = (iw_handler)orinoco_ioctl_getrid, +}; + +const struct iw_handler_def orinoco_handler_def = { + .num_standard = ARRAY_SIZE(orinoco_handler), + .num_private = ARRAY_SIZE(orinoco_private_handler), + .num_private_args = ARRAY_SIZE(orinoco_privtab), + .standard = orinoco_handler, + .private = orinoco_private_handler, + .private_args = orinoco_privtab, + .get_wireless_stats = orinoco_get_wireless_stats, +}; diff --git a/drivers/net/wireless/intersil/orinoco/wext.h b/drivers/net/wireless/intersil/orinoco/wext.h new file mode 100644 index 000000000..1479f4e26 --- /dev/null +++ b/drivers/net/wireless/intersil/orinoco/wext.h @@ -0,0 +1,13 @@ +/* Wireless extensions support. + * + * See copyright notice in main.c + */ +#ifndef _ORINOCO_WEXT_H_ +#define _ORINOCO_WEXT_H_ + +#include <net/iw_handler.h> + +/* Structure defining all our WEXT handlers */ +extern const struct iw_handler_def orinoco_handler_def; + +#endif /* _ORINOCO_WEXT_H_ */ diff --git a/drivers/net/wireless/intersil/p54/Kconfig b/drivers/net/wireless/intersil/p54/Kconfig new file mode 100644 index 000000000..e5b8e5e84 --- /dev/null +++ b/drivers/net/wireless/intersil/p54/Kconfig @@ -0,0 +1,71 @@ +config P54_COMMON + tristate "Softmac Prism54 support" + depends on MAC80211 + select FW_LOADER + select CRC_CCITT + ---help--- + This is common code for isl38xx/stlc45xx based modules. + This module does nothing by itself - the USB/PCI/SPI front-ends + also need to be enabled in order to support any devices. + + These devices require softmac firmware which can be found at + <http://wireless.kernel.org/en/users/Drivers/p54> + + If you choose to build a module, it'll be called p54common. + +config P54_USB + tristate "Prism54 USB support" + depends on P54_COMMON && USB + select CRC32 + ---help--- + This driver is for USB isl38xx based wireless cards. + + These devices require softmac firmware which can be found at + <http://wireless.kernel.org/en/users/Drivers/p54> + + If you choose to build a module, it'll be called p54usb. + +config P54_PCI + tristate "Prism54 PCI support" + depends on P54_COMMON && PCI + ---help--- + This driver is for PCI isl38xx based wireless cards. + This driver supports most devices that are supported by the + fullmac prism54 driver plus many devices which are not + supported by the fullmac driver/firmware. + + This driver requires softmac firmware which can be found at + <http://wireless.kernel.org/en/users/Drivers/p54> + + If you choose to build a module, it'll be called p54pci. + +config P54_SPI + tristate "Prism54 SPI (stlc45xx) support" + depends on P54_COMMON && SPI_MASTER + ---help--- + This driver is for stlc4550 or stlc4560 based wireless chips + such as Nokia's N800/N810 Portable Internet Tablet. + + If you choose to build a module, it'll be called p54spi. + +config P54_SPI_DEFAULT_EEPROM + bool "Include fallback EEPROM blob" + depends on P54_SPI + default n + ---help--- + Unlike the PCI or USB devices, the SPI variants don't have + a dedicated EEPROM chip to store all device specific values + for calibration, country and interface settings. + + The driver will try to load the image "DEBLOBBED", if the + file is put at the right place. (usually /lib/firmware.) + + Only if this request fails, this option will provide a + backup set of generic values to get the device working. + + Enabling this option adds about 4k to p54spi. + +config P54_LEDS + bool + depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON) + default y diff --git a/drivers/net/wireless/intersil/p54/Makefile b/drivers/net/wireless/intersil/p54/Makefile new file mode 100644 index 000000000..b542e68f1 --- /dev/null +++ b/drivers/net/wireless/intersil/p54/Makefile @@ -0,0 +1,7 @@ +p54common-objs := eeprom.o fwio.o txrx.o main.o +p54common-$(CONFIG_P54_LEDS) += led.o + +obj-$(CONFIG_P54_COMMON) += p54common.o +obj-$(CONFIG_P54_USB) += p54usb.o +obj-$(CONFIG_P54_PCI) += p54pci.o +obj-$(CONFIG_P54_SPI) += p54spi.o diff --git a/drivers/net/wireless/intersil/p54/eeprom.c b/drivers/net/wireless/intersil/p54/eeprom.c new file mode 100644 index 000000000..2fe713eda --- /dev/null +++ b/drivers/net/wireless/intersil/p54/eeprom.c @@ -0,0 +1,982 @@ +/* + * EEPROM parser code for mac80211 Prism54 drivers + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * Based on: + * - the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * - stlc45xx driver + * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <linux/sort.h> +#include <linux/slab.h> + +#include <net/mac80211.h> +#include <linux/crc-ccitt.h> +#include <linux/export.h> + +#include "p54.h" +#include "eeprom.h" +#include "lmac.h" + +static struct ieee80211_rate p54_bgrates[] = { + { .bitrate = 10, .hw_value = 0, }, + { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, .hw_value = 4, }, + { .bitrate = 90, .hw_value = 5, }, + { .bitrate = 120, .hw_value = 6, }, + { .bitrate = 180, .hw_value = 7, }, + { .bitrate = 240, .hw_value = 8, }, + { .bitrate = 360, .hw_value = 9, }, + { .bitrate = 480, .hw_value = 10, }, + { .bitrate = 540, .hw_value = 11, }, +}; + +static struct ieee80211_rate p54_arates[] = { + { .bitrate = 60, .hw_value = 4, }, + { .bitrate = 90, .hw_value = 5, }, + { .bitrate = 120, .hw_value = 6, }, + { .bitrate = 180, .hw_value = 7, }, + { .bitrate = 240, .hw_value = 8, }, + { .bitrate = 360, .hw_value = 9, }, + { .bitrate = 480, .hw_value = 10, }, + { .bitrate = 540, .hw_value = 11, }, +}; + +static struct p54_rssi_db_entry p54_rssi_default = { + /* + * The defaults are taken from usb-logs of the + * vendor driver. So, they should be safe to + * use in case we can't get a match from the + * rssi <-> dBm conversion database. + */ + .mul = 130, + .add = -398, +}; + +#define CHAN_HAS_CAL BIT(0) +#define CHAN_HAS_LIMIT BIT(1) +#define CHAN_HAS_CURVE BIT(2) +#define CHAN_HAS_ALL (CHAN_HAS_CAL | CHAN_HAS_LIMIT | CHAN_HAS_CURVE) + +struct p54_channel_entry { + u16 freq; + u16 data; + int index; + int max_power; + enum ieee80211_band band; +}; + +struct p54_channel_list { + struct p54_channel_entry *channels; + size_t entries; + size_t max_entries; + size_t band_channel_num[IEEE80211_NUM_BANDS]; +}; + +static int p54_get_band_from_freq(u16 freq) +{ + /* FIXME: sync these values with the 802.11 spec */ + + if ((freq >= 2412) && (freq <= 2484)) + return IEEE80211_BAND_2GHZ; + + if ((freq >= 4920) && (freq <= 5825)) + return IEEE80211_BAND_5GHZ; + + return -1; +} + +static int same_band(u16 freq, u16 freq2) +{ + return p54_get_band_from_freq(freq) == p54_get_band_from_freq(freq2); +} + +static int p54_compare_channels(const void *_a, + const void *_b) +{ + const struct p54_channel_entry *a = _a; + const struct p54_channel_entry *b = _b; + + return a->freq - b->freq; +} + +static int p54_compare_rssichan(const void *_a, + const void *_b) +{ + const struct p54_rssi_db_entry *a = _a; + const struct p54_rssi_db_entry *b = _b; + + return a->freq - b->freq; +} + +static int p54_fill_band_bitrates(struct ieee80211_hw *dev, + struct ieee80211_supported_band *band_entry, + enum ieee80211_band band) +{ + /* TODO: generate rate array dynamically */ + + switch (band) { + case IEEE80211_BAND_2GHZ: + band_entry->bitrates = p54_bgrates; + band_entry->n_bitrates = ARRAY_SIZE(p54_bgrates); + break; + case IEEE80211_BAND_5GHZ: + band_entry->bitrates = p54_arates; + band_entry->n_bitrates = ARRAY_SIZE(p54_arates); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int p54_generate_band(struct ieee80211_hw *dev, + struct p54_channel_list *list, + unsigned int *chan_num, + enum ieee80211_band band) +{ + struct p54_common *priv = dev->priv; + struct ieee80211_supported_band *tmp, *old; + unsigned int i, j; + int ret = -ENOMEM; + + if ((!list->entries) || (!list->band_channel_num[band])) + return -EINVAL; + + tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) + goto err_out; + + tmp->channels = kzalloc(sizeof(struct ieee80211_channel) * + list->band_channel_num[band], GFP_KERNEL); + if (!tmp->channels) + goto err_out; + + ret = p54_fill_band_bitrates(dev, tmp, band); + if (ret) + goto err_out; + + for (i = 0, j = 0; (j < list->band_channel_num[band]) && + (i < list->entries); i++) { + struct p54_channel_entry *chan = &list->channels[i]; + struct ieee80211_channel *dest = &tmp->channels[j]; + + if (chan->band != band) + continue; + + if (chan->data != CHAN_HAS_ALL) { + wiphy_err(dev->wiphy, "%s%s%s is/are missing for " + "channel:%d [%d MHz].\n", + (chan->data & CHAN_HAS_CAL ? "" : + " [iqauto calibration data]"), + (chan->data & CHAN_HAS_LIMIT ? "" : + " [output power limits]"), + (chan->data & CHAN_HAS_CURVE ? "" : + " [curve data]"), + chan->index, chan->freq); + continue; + } + + dest->band = chan->band; + dest->center_freq = chan->freq; + dest->max_power = chan->max_power; + priv->survey[*chan_num].channel = &tmp->channels[j]; + priv->survey[*chan_num].filled = SURVEY_INFO_NOISE_DBM | + SURVEY_INFO_TIME | + SURVEY_INFO_TIME_BUSY | + SURVEY_INFO_TIME_TX; + dest->hw_value = (*chan_num); + j++; + (*chan_num)++; + } + + if (j == 0) { + wiphy_err(dev->wiphy, "Disabling totally damaged %d GHz band\n", + (band == IEEE80211_BAND_2GHZ) ? 2 : 5); + + ret = -ENODATA; + goto err_out; + } + + tmp->n_channels = j; + old = priv->band_table[band]; + priv->band_table[band] = tmp; + if (old) { + kfree(old->channels); + kfree(old); + } + + return 0; + +err_out: + if (tmp) { + kfree(tmp->channels); + kfree(tmp); + } + + return ret; +} + +static struct p54_channel_entry *p54_update_channel_param(struct p54_channel_list *list, + u16 freq, u16 data) +{ + int i; + struct p54_channel_entry *entry = NULL; + + /* + * usually all lists in the eeprom are mostly sorted. + * so it's very likely that the entry we are looking for + * is right at the end of the list + */ + for (i = list->entries; i >= 0; i--) { + if (freq == list->channels[i].freq) { + entry = &list->channels[i]; + break; + } + } + + if ((i < 0) && (list->entries < list->max_entries)) { + /* entry does not exist yet. Initialize a new one. */ + int band = p54_get_band_from_freq(freq); + + /* + * filter out frequencies which don't belong into + * any supported band. + */ + if (band >= 0) { + i = list->entries++; + list->band_channel_num[band]++; + + entry = &list->channels[i]; + entry->freq = freq; + entry->band = band; + entry->index = ieee80211_frequency_to_channel(freq); + entry->max_power = 0; + entry->data = 0; + } + } + + if (entry) + entry->data |= data; + + return entry; +} + +static int p54_get_maxpower(struct p54_common *priv, void *data) +{ + switch (priv->rxhw & PDR_SYNTH_FRONTEND_MASK) { + case PDR_SYNTH_FRONTEND_LONGBOW: { + struct pda_channel_output_limit_longbow *pda = data; + int j; + u16 rawpower = 0; + pda = data; + for (j = 0; j < ARRAY_SIZE(pda->point); j++) { + struct pda_channel_output_limit_point_longbow *point = + &pda->point[j]; + rawpower = max_t(u16, + rawpower, le16_to_cpu(point->val_qpsk)); + rawpower = max_t(u16, + rawpower, le16_to_cpu(point->val_bpsk)); + rawpower = max_t(u16, + rawpower, le16_to_cpu(point->val_16qam)); + rawpower = max_t(u16, + rawpower, le16_to_cpu(point->val_64qam)); + } + /* longbow seems to use 1/16 dBm units */ + return rawpower / 16; + } + + case PDR_SYNTH_FRONTEND_DUETTE3: + case PDR_SYNTH_FRONTEND_DUETTE2: + case PDR_SYNTH_FRONTEND_FRISBEE: + case PDR_SYNTH_FRONTEND_XBOW: { + struct pda_channel_output_limit *pda = data; + u8 rawpower = 0; + rawpower = max(rawpower, pda->val_qpsk); + rawpower = max(rawpower, pda->val_bpsk); + rawpower = max(rawpower, pda->val_16qam); + rawpower = max(rawpower, pda->val_64qam); + /* raw values are in 1/4 dBm units */ + return rawpower / 4; + } + + default: + return 20; + } +} + +static int p54_generate_channel_lists(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + struct p54_channel_list *list; + unsigned int i, j, k, max_channel_num; + int ret = 0; + u16 freq; + + if ((priv->iq_autocal_len != priv->curve_data->entries) || + (priv->iq_autocal_len != priv->output_limit->entries)) + wiphy_err(dev->wiphy, + "Unsupported or damaged EEPROM detected. " + "You may not be able to use all channels.\n"); + + max_channel_num = max_t(unsigned int, priv->output_limit->entries, + priv->iq_autocal_len); + max_channel_num = max_t(unsigned int, max_channel_num, + priv->curve_data->entries); + + list = kzalloc(sizeof(*list), GFP_KERNEL); + if (!list) { + ret = -ENOMEM; + goto free; + } + priv->chan_num = max_channel_num; + priv->survey = kzalloc(sizeof(struct survey_info) * max_channel_num, + GFP_KERNEL); + if (!priv->survey) { + ret = -ENOMEM; + goto free; + } + + list->max_entries = max_channel_num; + list->channels = kzalloc(sizeof(struct p54_channel_entry) * + max_channel_num, GFP_KERNEL); + if (!list->channels) { + ret = -ENOMEM; + goto free; + } + + for (i = 0; i < max_channel_num; i++) { + if (i < priv->iq_autocal_len) { + freq = le16_to_cpu(priv->iq_autocal[i].freq); + p54_update_channel_param(list, freq, CHAN_HAS_CAL); + } + + if (i < priv->output_limit->entries) { + struct p54_channel_entry *tmp; + + void *data = (void *) ((unsigned long) i * + priv->output_limit->entry_size + + priv->output_limit->offset + + priv->output_limit->data); + + freq = le16_to_cpup((__le16 *) data); + tmp = p54_update_channel_param(list, freq, + CHAN_HAS_LIMIT); + if (tmp) { + tmp->max_power = p54_get_maxpower(priv, data); + } + } + + if (i < priv->curve_data->entries) { + freq = le16_to_cpup((__le16 *) (i * + priv->curve_data->entry_size + + priv->curve_data->offset + + priv->curve_data->data)); + + p54_update_channel_param(list, freq, CHAN_HAS_CURVE); + } + } + + /* sort the channel list by frequency */ + sort(list->channels, list->entries, sizeof(struct p54_channel_entry), + p54_compare_channels, NULL); + + k = 0; + for (i = 0, j = 0; i < IEEE80211_NUM_BANDS; i++) { + if (p54_generate_band(dev, list, &k, i) == 0) + j++; + } + if (j == 0) { + /* no useable band available. */ + ret = -EINVAL; + } + +free: + if (list) { + kfree(list->channels); + kfree(list); + } + if (ret) { + kfree(priv->survey); + priv->survey = NULL; + } + + return ret; +} + +static int p54_convert_rev0(struct ieee80211_hw *dev, + struct pda_pa_curve_data *curve_data) +{ + struct p54_common *priv = dev->priv; + struct p54_pa_curve_data_sample *dst; + struct pda_pa_curve_data_sample_rev0 *src; + size_t cd_len = sizeof(*curve_data) + + (curve_data->points_per_channel*sizeof(*dst) + 2) * + curve_data->channels; + unsigned int i, j; + void *source, *target; + + priv->curve_data = kmalloc(sizeof(*priv->curve_data) + cd_len, + GFP_KERNEL); + if (!priv->curve_data) + return -ENOMEM; + + priv->curve_data->entries = curve_data->channels; + priv->curve_data->entry_size = sizeof(__le16) + + sizeof(*dst) * curve_data->points_per_channel; + priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data); + priv->curve_data->len = cd_len; + memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data)); + source = curve_data->data; + target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data; + for (i = 0; i < curve_data->channels; i++) { + __le16 *freq = source; + source += sizeof(__le16); + *((__le16 *)target) = *freq; + target += sizeof(__le16); + for (j = 0; j < curve_data->points_per_channel; j++) { + dst = target; + src = source; + + dst->rf_power = src->rf_power; + dst->pa_detector = src->pa_detector; + dst->data_64qam = src->pcv; + /* "invent" the points for the other modulations */ +#define SUB(x, y) (u8)(((x) - (y)) > (x) ? 0 : (x) - (y)) + dst->data_16qam = SUB(src->pcv, 12); + dst->data_qpsk = SUB(dst->data_16qam, 12); + dst->data_bpsk = SUB(dst->data_qpsk, 12); + dst->data_barker = SUB(dst->data_bpsk, 14); +#undef SUB + target += sizeof(*dst); + source += sizeof(*src); + } + } + + return 0; +} + +static int p54_convert_rev1(struct ieee80211_hw *dev, + struct pda_pa_curve_data *curve_data) +{ + struct p54_common *priv = dev->priv; + struct p54_pa_curve_data_sample *dst; + struct pda_pa_curve_data_sample_rev1 *src; + size_t cd_len = sizeof(*curve_data) + + (curve_data->points_per_channel*sizeof(*dst) + 2) * + curve_data->channels; + unsigned int i, j; + void *source, *target; + + priv->curve_data = kzalloc(cd_len + sizeof(*priv->curve_data), + GFP_KERNEL); + if (!priv->curve_data) + return -ENOMEM; + + priv->curve_data->entries = curve_data->channels; + priv->curve_data->entry_size = sizeof(__le16) + + sizeof(*dst) * curve_data->points_per_channel; + priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data); + priv->curve_data->len = cd_len; + memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data)); + source = curve_data->data; + target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data; + for (i = 0; i < curve_data->channels; i++) { + __le16 *freq = source; + source += sizeof(__le16); + *((__le16 *)target) = *freq; + target += sizeof(__le16); + for (j = 0; j < curve_data->points_per_channel; j++) { + memcpy(target, source, sizeof(*src)); + + target += sizeof(*dst); + source += sizeof(*src); + } + source++; + } + + return 0; +} + +static const char *p54_rf_chips[] = { "INVALID-0", "Duette3", "Duette2", + "Frisbee", "Xbow", "Longbow", "INVALID-6", "INVALID-7" }; + +static int p54_parse_rssical(struct ieee80211_hw *dev, + u8 *data, int len, u16 type) +{ + struct p54_common *priv = dev->priv; + struct p54_rssi_db_entry *entry; + size_t db_len, entries; + int offset = 0, i; + + if (type != PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) { + entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2; + if (len != sizeof(struct pda_rssi_cal_entry) * entries) { + wiphy_err(dev->wiphy, "rssical size mismatch.\n"); + goto err_data; + } + } else { + /* + * Some devices (Dell 1450 USB, Xbow 5GHz card, etc...) + * have an empty two byte header. + */ + if (*((__le16 *)&data[offset]) == cpu_to_le16(0)) + offset += 2; + + entries = (len - offset) / + sizeof(struct pda_rssi_cal_ext_entry); + + if (len < offset || + (len - offset) % sizeof(struct pda_rssi_cal_ext_entry) || + entries == 0) { + wiphy_err(dev->wiphy, "invalid rssi database.\n"); + goto err_data; + } + } + + db_len = sizeof(*entry) * entries; + priv->rssi_db = kzalloc(db_len + sizeof(*priv->rssi_db), GFP_KERNEL); + if (!priv->rssi_db) + return -ENOMEM; + + priv->rssi_db->offset = 0; + priv->rssi_db->entries = entries; + priv->rssi_db->entry_size = sizeof(*entry); + priv->rssi_db->len = db_len; + + entry = (void *)((unsigned long)priv->rssi_db->data + priv->rssi_db->offset); + if (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) { + struct pda_rssi_cal_ext_entry *cal = (void *) &data[offset]; + + for (i = 0; i < entries; i++) { + entry[i].freq = le16_to_cpu(cal[i].freq); + entry[i].mul = (s16) le16_to_cpu(cal[i].mul); + entry[i].add = (s16) le16_to_cpu(cal[i].add); + } + } else { + struct pda_rssi_cal_entry *cal = (void *) &data[offset]; + + for (i = 0; i < entries; i++) { + u16 freq = 0; + switch (i) { + case IEEE80211_BAND_2GHZ: + freq = 2437; + break; + case IEEE80211_BAND_5GHZ: + freq = 5240; + break; + } + + entry[i].freq = freq; + entry[i].mul = (s16) le16_to_cpu(cal[i].mul); + entry[i].add = (s16) le16_to_cpu(cal[i].add); + } + } + + /* sort the list by channel frequency */ + sort(entry, entries, sizeof(*entry), p54_compare_rssichan, NULL); + return 0; + +err_data: + wiphy_err(dev->wiphy, + "rssi calibration data packing type:(%x) len:%d.\n", + type, len); + + print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE, data, len); + + wiphy_err(dev->wiphy, "please report this issue.\n"); + return -EINVAL; +} + +struct p54_rssi_db_entry *p54_rssi_find(struct p54_common *priv, const u16 freq) +{ + struct p54_rssi_db_entry *entry; + int i, found = -1; + + if (!priv->rssi_db) + return &p54_rssi_default; + + entry = (void *)(priv->rssi_db->data + priv->rssi_db->offset); + for (i = 0; i < priv->rssi_db->entries; i++) { + if (!same_band(freq, entry[i].freq)) + continue; + + if (found == -1) { + found = i; + continue; + } + + /* nearest match */ + if (abs(freq - entry[i].freq) < + abs(freq - entry[found].freq)) { + found = i; + continue; + } else { + break; + } + } + + return found < 0 ? &p54_rssi_default : &entry[found]; +} + +static void p54_parse_default_country(struct ieee80211_hw *dev, + void *data, int len) +{ + struct pda_country *country; + + if (len != sizeof(*country)) { + wiphy_err(dev->wiphy, + "found possible invalid default country eeprom entry. (entry size: %d)\n", + len); + + print_hex_dump_bytes("country:", DUMP_PREFIX_NONE, + data, len); + + wiphy_err(dev->wiphy, "please report this issue.\n"); + return; + } + + country = (struct pda_country *) data; + if (country->flags == PDR_COUNTRY_CERT_CODE_PSEUDO) + regulatory_hint(dev->wiphy, country->alpha2); + else { + /* TODO: + * write a shared/common function that converts + * "Regulatory domain codes" (802.11-2007 14.8.2.2) + * into ISO/IEC 3166-1 alpha2 for regulatory_hint. + */ + } +} + +static int p54_convert_output_limits(struct ieee80211_hw *dev, + u8 *data, size_t len) +{ + struct p54_common *priv = dev->priv; + + if (len < 2) + return -EINVAL; + + if (data[0] != 0) { + wiphy_err(dev->wiphy, "unknown output power db revision:%x\n", + data[0]); + return -EINVAL; + } + + if (2 + data[1] * sizeof(struct pda_channel_output_limit) > len) + return -EINVAL; + + priv->output_limit = kmalloc(data[1] * + sizeof(struct pda_channel_output_limit) + + sizeof(*priv->output_limit), GFP_KERNEL); + + if (!priv->output_limit) + return -ENOMEM; + + priv->output_limit->offset = 0; + priv->output_limit->entries = data[1]; + priv->output_limit->entry_size = + sizeof(struct pda_channel_output_limit); + priv->output_limit->len = priv->output_limit->entry_size * + priv->output_limit->entries + + priv->output_limit->offset; + + memcpy(priv->output_limit->data, &data[2], + data[1] * sizeof(struct pda_channel_output_limit)); + + return 0; +} + +static struct p54_cal_database *p54_convert_db(struct pda_custom_wrapper *src, + size_t total_len) +{ + struct p54_cal_database *dst; + size_t payload_len, entries, entry_size, offset; + + payload_len = le16_to_cpu(src->len); + entries = le16_to_cpu(src->entries); + entry_size = le16_to_cpu(src->entry_size); + offset = le16_to_cpu(src->offset); + if (((entries * entry_size + offset) != payload_len) || + (payload_len + sizeof(*src) != total_len)) + return NULL; + + dst = kmalloc(sizeof(*dst) + payload_len, GFP_KERNEL); + if (!dst) + return NULL; + + dst->entries = entries; + dst->entry_size = entry_size; + dst->offset = offset; + dst->len = payload_len; + + memcpy(dst->data, src->data, payload_len); + return dst; +} + +int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) +{ + struct p54_common *priv = dev->priv; + struct eeprom_pda_wrap *wrap; + struct pda_entry *entry; + unsigned int data_len, entry_len; + void *tmp; + int err; + u8 *end = (u8 *)eeprom + len; + u16 synth = 0; + u16 crc16 = ~0; + + wrap = (struct eeprom_pda_wrap *) eeprom; + entry = (void *)wrap->data + le16_to_cpu(wrap->len); + + /* verify that at least the entry length/code fits */ + while ((u8 *)entry <= end - sizeof(*entry)) { + entry_len = le16_to_cpu(entry->len); + data_len = ((entry_len - 1) << 1); + + /* abort if entry exceeds whole structure */ + if ((u8 *)entry + sizeof(*entry) + data_len > end) + break; + + switch (le16_to_cpu(entry->code)) { + case PDR_MAC_ADDRESS: + if (data_len != ETH_ALEN) + break; + SET_IEEE80211_PERM_ADDR(dev, entry->data); + break; + case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS: + if (priv->output_limit) + break; + err = p54_convert_output_limits(dev, entry->data, + data_len); + if (err) + goto err; + break; + case PDR_PRISM_PA_CAL_CURVE_DATA: { + struct pda_pa_curve_data *curve_data = + (struct pda_pa_curve_data *)entry->data; + if (data_len < sizeof(*curve_data)) { + err = -EINVAL; + goto err; + } + + switch (curve_data->cal_method_rev) { + case 0: + err = p54_convert_rev0(dev, curve_data); + break; + case 1: + err = p54_convert_rev1(dev, curve_data); + break; + default: + wiphy_err(dev->wiphy, + "unknown curve data revision %d\n", + curve_data->cal_method_rev); + err = -ENODEV; + break; + } + if (err) + goto err; + } + break; + case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: + priv->iq_autocal = kmemdup(entry->data, data_len, + GFP_KERNEL); + if (!priv->iq_autocal) { + err = -ENOMEM; + goto err; + } + + priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry); + break; + case PDR_DEFAULT_COUNTRY: + p54_parse_default_country(dev, entry->data, data_len); + break; + case PDR_INTERFACE_LIST: + tmp = entry->data; + while ((u8 *)tmp < entry->data + data_len) { + struct exp_if *exp_if = tmp; + if (exp_if->if_id == cpu_to_le16(IF_ID_ISL39000)) + synth = le16_to_cpu(exp_if->variant); + tmp += sizeof(*exp_if); + } + break; + case PDR_HARDWARE_PLATFORM_COMPONENT_ID: + if (data_len < 2) + break; + priv->version = *(u8 *)(entry->data + 1); + break; + case PDR_RSSI_LINEAR_APPROXIMATION: + case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND: + case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED: + err = p54_parse_rssical(dev, entry->data, data_len, + le16_to_cpu(entry->code)); + if (err) + goto err; + break; + case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2: { + struct pda_custom_wrapper *pda = (void *) entry->data; + __le16 *src; + u16 *dst; + int i; + + if (priv->rssi_db || data_len < sizeof(*pda)) + break; + + priv->rssi_db = p54_convert_db(pda, data_len); + if (!priv->rssi_db) + break; + + src = (void *) priv->rssi_db->data; + dst = (void *) priv->rssi_db->data; + + for (i = 0; i < priv->rssi_db->entries; i++) + *(dst++) = (s16) le16_to_cpu(*(src++)); + + } + break; + case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: { + struct pda_custom_wrapper *pda = (void *) entry->data; + if (priv->output_limit || data_len < sizeof(*pda)) + break; + priv->output_limit = p54_convert_db(pda, data_len); + } + break; + case PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM: { + struct pda_custom_wrapper *pda = (void *) entry->data; + if (priv->curve_data || data_len < sizeof(*pda)) + break; + priv->curve_data = p54_convert_db(pda, data_len); + } + break; + case PDR_END: + crc16 = ~crc_ccitt(crc16, (u8 *) entry, sizeof(*entry)); + if (crc16 != le16_to_cpup((__le16 *)entry->data)) { + wiphy_err(dev->wiphy, "eeprom failed checksum " + "test!\n"); + err = -ENOMSG; + goto err; + } else { + goto good_eeprom; + } + break; + default: + break; + } + + crc16 = crc_ccitt(crc16, (u8 *)entry, (entry_len + 1) * 2); + entry = (void *)entry + (entry_len + 1) * 2; + } + + wiphy_err(dev->wiphy, "unexpected end of eeprom data.\n"); + err = -ENODATA; + goto err; + +good_eeprom: + if (!synth || !priv->iq_autocal || !priv->output_limit || + !priv->curve_data) { + wiphy_err(dev->wiphy, + "not all required entries found in eeprom!\n"); + err = -EINVAL; + goto err; + } + + priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK; + + err = p54_generate_channel_lists(dev); + if (err) + goto err; + + if (priv->rxhw == PDR_SYNTH_FRONTEND_XBOW) + p54_init_xbow_synth(priv); + if (!(synth & PDR_SYNTH_24_GHZ_DISABLED)) + dev->wiphy->bands[IEEE80211_BAND_2GHZ] = + priv->band_table[IEEE80211_BAND_2GHZ]; + if (!(synth & PDR_SYNTH_5_GHZ_DISABLED)) + dev->wiphy->bands[IEEE80211_BAND_5GHZ] = + priv->band_table[IEEE80211_BAND_5GHZ]; + if ((synth & PDR_SYNTH_RX_DIV_MASK) == PDR_SYNTH_RX_DIV_SUPPORTED) + priv->rx_diversity_mask = 3; + if ((synth & PDR_SYNTH_TX_DIV_MASK) == PDR_SYNTH_TX_DIV_SUPPORTED) + priv->tx_diversity_mask = 3; + + if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { + u8 perm_addr[ETH_ALEN]; + + wiphy_warn(dev->wiphy, + "Invalid hwaddr! Using randomly generated MAC addr\n"); + eth_random_addr(perm_addr); + SET_IEEE80211_PERM_ADDR(dev, perm_addr); + } + + priv->cur_rssi = &p54_rssi_default; + + wiphy_info(dev->wiphy, "hwaddr %pM, MAC:isl38%02x RF:%s\n", + dev->wiphy->perm_addr, priv->version, + p54_rf_chips[priv->rxhw]); + + return 0; + +err: + kfree(priv->iq_autocal); + kfree(priv->output_limit); + kfree(priv->curve_data); + kfree(priv->rssi_db); + kfree(priv->survey); + priv->iq_autocal = NULL; + priv->output_limit = NULL; + priv->curve_data = NULL; + priv->rssi_db = NULL; + priv->survey = NULL; + + wiphy_err(dev->wiphy, "eeprom parse failed!\n"); + return err; +} +EXPORT_SYMBOL_GPL(p54_parse_eeprom); + +int p54_read_eeprom(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + size_t eeprom_size = 0x2020, offset = 0, blocksize, maxblocksize; + int ret = -ENOMEM; + void *eeprom; + + maxblocksize = EEPROM_READBACK_LEN; + if (priv->fw_var >= 0x509) + maxblocksize -= 0xc; + else + maxblocksize -= 0x4; + + eeprom = kzalloc(eeprom_size, GFP_KERNEL); + if (unlikely(!eeprom)) + goto free; + + while (eeprom_size) { + blocksize = min(eeprom_size, maxblocksize); + ret = p54_download_eeprom(priv, eeprom + offset, + offset, blocksize); + if (unlikely(ret)) + goto free; + + offset += blocksize; + eeprom_size -= blocksize; + } + + ret = p54_parse_eeprom(dev, eeprom, offset); +free: + kfree(eeprom); + return ret; +} +EXPORT_SYMBOL_GPL(p54_read_eeprom); diff --git a/drivers/net/wireless/intersil/p54/eeprom.h b/drivers/net/wireless/intersil/p54/eeprom.h new file mode 100644 index 000000000..20ebe39a3 --- /dev/null +++ b/drivers/net/wireless/intersil/p54/eeprom.h @@ -0,0 +1,245 @@ +/* + * eeprom specific definitions for mac80211 Prism54 drivers + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> + * + * Based on: + * - the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * - LMAC API interface header file for STLC4560 (lmac_longbow.h) + * Copyright (C) 2007 Conexant Systems, Inc. + * + * - islmvc driver + * Copyright (C) 2001 Intersil Americas Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef EEPROM_H +#define EEPROM_H + +/* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */ + +struct pda_entry { + __le16 len; /* includes both code and data */ + __le16 code; + u8 data[0]; +} __packed; + +struct eeprom_pda_wrap { + __le32 magic; + __le16 pad; + __le16 len; + __le32 arm_opcode; + u8 data[0]; +} __packed; + +struct p54_iq_autocal_entry { + __le16 iq_param[4]; +} __packed; + +struct pda_iq_autocal_entry { + __le16 freq; + struct p54_iq_autocal_entry params; +} __packed; + +struct pda_channel_output_limit { + __le16 freq; + u8 val_bpsk; + u8 val_qpsk; + u8 val_16qam; + u8 val_64qam; + u8 rate_set_mask; + u8 rate_set_size; +} __packed; + +struct pda_channel_output_limit_point_longbow { + __le16 val_bpsk; + __le16 val_qpsk; + __le16 val_16qam; + __le16 val_64qam; +} __packed; + +struct pda_channel_output_limit_longbow { + __le16 freq; + struct pda_channel_output_limit_point_longbow point[3]; +} __packed; + +struct pda_pa_curve_data_sample_rev0 { + u8 rf_power; + u8 pa_detector; + u8 pcv; +} __packed; + +struct pda_pa_curve_data_sample_rev1 { + u8 rf_power; + u8 pa_detector; + u8 data_barker; + u8 data_bpsk; + u8 data_qpsk; + u8 data_16qam; + u8 data_64qam; +} __packed; + +struct pda_pa_curve_data { + u8 cal_method_rev; + u8 channels; + u8 points_per_channel; + u8 padding; + u8 data[0]; +} __packed; + +struct pda_rssi_cal_ext_entry { + __le16 freq; + __le16 mul; + __le16 add; +} __packed; + +struct pda_rssi_cal_entry { + __le16 mul; + __le16 add; +} __packed; + +struct pda_country { + u8 regdomain; + u8 alpha2[2]; + u8 flags; +} __packed; + +struct pda_antenna_gain { + struct { + u8 gain_5GHz; /* 0.25 dBi units */ + u8 gain_2GHz; /* 0.25 dBi units */ + } __packed antenna[0]; +} __packed; + +struct pda_custom_wrapper { + __le16 entries; + __le16 entry_size; + __le16 offset; + __le16 len; + u8 data[0]; +} __packed; + +/* + * this defines the PDR codes used to build PDAs as defined in document + * number 553155. The current implementation mirrors version 1.1 of the + * document and lists only PDRs supported by the ARM platform. + */ + +/* common and choice range (0x0000 - 0x0fff) */ +#define PDR_END 0x0000 +#define PDR_MANUFACTURING_PART_NUMBER 0x0001 +#define PDR_PDA_VERSION 0x0002 +#define PDR_NIC_SERIAL_NUMBER 0x0003 +#define PDR_NIC_RAM_SIZE 0x0005 +#define PDR_RFMODEM_SUP_RANGE 0x0006 +#define PDR_PRISM_MAC_SUP_RANGE 0x0007 +#define PDR_NIC_ID 0x0008 + +#define PDR_MAC_ADDRESS 0x0101 +#define PDR_REGULATORY_DOMAIN_LIST 0x0103 /* obsolete */ +#define PDR_ALLOWED_CHAN_SET 0x0104 +#define PDR_DEFAULT_CHAN 0x0105 +#define PDR_TEMPERATURE_TYPE 0x0107 + +#define PDR_IFR_SETTING 0x0200 +#define PDR_RFR_SETTING 0x0201 +#define PDR_3861_BASELINE_REG_SETTINGS 0x0202 +#define PDR_3861_SHADOW_REG_SETTINGS 0x0203 +#define PDR_3861_IFRF_REG_SETTINGS 0x0204 + +#define PDR_3861_CHAN_CALIB_SET_POINTS 0x0300 +#define PDR_3861_CHAN_CALIB_INTEGRATOR 0x0301 + +#define PDR_3842_PRISM_II_NIC_CONFIG 0x0400 +#define PDR_PRISM_USB_ID 0x0401 +#define PDR_PRISM_PCI_ID 0x0402 +#define PDR_PRISM_PCI_IF_CONFIG 0x0403 +#define PDR_PRISM_PCI_PM_CONFIG 0x0404 + +#define PDR_3861_MF_TEST_CHAN_SET_POINTS 0x0900 +#define PDR_3861_MF_TEST_CHAN_INTEGRATORS 0x0901 + +/* ARM range (0x1000 - 0x1fff) */ +#define PDR_COUNTRY_INFORMATION 0x1000 /* obsolete */ +#define PDR_INTERFACE_LIST 0x1001 +#define PDR_HARDWARE_PLATFORM_COMPONENT_ID 0x1002 +#define PDR_OEM_NAME 0x1003 +#define PDR_PRODUCT_NAME 0x1004 +#define PDR_UTF8_OEM_NAME 0x1005 +#define PDR_UTF8_PRODUCT_NAME 0x1006 +#define PDR_COUNTRY_LIST 0x1007 +#define PDR_DEFAULT_COUNTRY 0x1008 + +#define PDR_ANTENNA_GAIN 0x1100 + +#define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA 0x1901 +#define PDR_RSSI_LINEAR_APPROXIMATION 0x1902 +#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS 0x1903 +#define PDR_PRISM_PA_CAL_CURVE_DATA 0x1904 +#define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND 0x1905 +#define PDR_PRISM_ZIF_TX_IQ_CALIBRATION 0x1906 +#define PDR_REGULATORY_POWER_LIMITS 0x1907 +#define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED 0x1908 +#define PDR_RADIATED_TRANSMISSION_CORRECTION 0x1909 +#define PDR_PRISM_TX_IQ_CALIBRATION 0x190a + +/* reserved range (0x2000 - 0x7fff) */ + +/* customer range (0x8000 - 0xffff) */ +#define PDR_BASEBAND_REGISTERS 0x8000 +#define PDR_PER_CHANNEL_BASEBAND_REGISTERS 0x8001 + +/* used by our modificated eeprom image */ +#define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM 0xDEAD +#define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2 0xCAFF +#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM 0xBEEF +#define PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM 0xB05D + +/* Interface Definitions */ +#define PDR_INTERFACE_ROLE_SERVER 0x0000 +#define PDR_INTERFACE_ROLE_CLIENT 0x0001 + +/* PDR definitions for default country & country list */ +#define PDR_COUNTRY_CERT_CODE 0x80 +#define PDR_COUNTRY_CERT_CODE_REAL 0x00 +#define PDR_COUNTRY_CERT_CODE_PSEUDO 0x80 +#define PDR_COUNTRY_CERT_BAND 0x40 +#define PDR_COUNTRY_CERT_BAND_2GHZ 0x00 +#define PDR_COUNTRY_CERT_BAND_5GHZ 0x40 +#define PDR_COUNTRY_CERT_IODOOR 0x30 +#define PDR_COUNTRY_CERT_IODOOR_BOTH 0x00 +#define PDR_COUNTRY_CERT_IODOOR_INDOOR 0x20 +#define PDR_COUNTRY_CERT_IODOOR_OUTDOOR 0x30 +#define PDR_COUNTRY_CERT_INDEX 0x0f + +/* Specific LMAC FW/HW variant definitions */ +#define PDR_SYNTH_FRONTEND_MASK 0x0007 +#define PDR_SYNTH_FRONTEND_DUETTE3 0x0001 +#define PDR_SYNTH_FRONTEND_DUETTE2 0x0002 +#define PDR_SYNTH_FRONTEND_FRISBEE 0x0003 +#define PDR_SYNTH_FRONTEND_XBOW 0x0004 +#define PDR_SYNTH_FRONTEND_LONGBOW 0x0005 +#define PDR_SYNTH_IQ_CAL_MASK 0x0018 +#define PDR_SYNTH_IQ_CAL_PA_DETECTOR 0x0000 +#define PDR_SYNTH_IQ_CAL_DISABLED 0x0008 +#define PDR_SYNTH_IQ_CAL_ZIF 0x0010 +#define PDR_SYNTH_FAA_SWITCH_MASK 0x0020 +#define PDR_SYNTH_FAA_SWITCH_ENABLED 0x0020 +#define PDR_SYNTH_24_GHZ_MASK 0x0040 +#define PDR_SYNTH_24_GHZ_DISABLED 0x0040 +#define PDR_SYNTH_5_GHZ_MASK 0x0080 +#define PDR_SYNTH_5_GHZ_DISABLED 0x0080 +#define PDR_SYNTH_RX_DIV_MASK 0x0100 +#define PDR_SYNTH_RX_DIV_SUPPORTED 0x0100 +#define PDR_SYNTH_TX_DIV_MASK 0x0200 +#define PDR_SYNTH_TX_DIV_SUPPORTED 0x0200 +#define PDR_SYNTH_ASM_MASK 0x0400 +#define PDR_SYNTH_ASM_XSWON 0x0400 + +#endif /* EEPROM_H */ diff --git a/drivers/net/wireless/intersil/p54/fwio.c b/drivers/net/wireless/intersil/p54/fwio.c new file mode 100644 index 000000000..257a9eadd --- /dev/null +++ b/drivers/net/wireless/intersil/p54/fwio.c @@ -0,0 +1,764 @@ +/* + * Firmware I/O code for mac80211 Prism54 drivers + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * Based on: + * - the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * - stlc45xx driver + * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/slab.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <linux/export.h> + +#include <net/mac80211.h> + +#include "p54.h" +#include "eeprom.h" +#include "lmac.h" + +int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) +{ + struct p54_common *priv = dev->priv; + struct exp_if *exp_if; + struct bootrec *bootrec; + u32 *data = (u32 *)fw->data; + u32 *end_data = (u32 *)fw->data + (fw->size >> 2); + u8 *fw_version = NULL; + size_t len; + int i; + int maxlen; + + if (priv->rx_start) + return 0; + + while (data < end_data && *data) + data++; + + while (data < end_data && !*data) + data++; + + bootrec = (struct bootrec *) data; + + while (bootrec->data <= end_data && (bootrec->data + + (len = le32_to_cpu(bootrec->len))) <= end_data) { + u32 code = le32_to_cpu(bootrec->code); + switch (code) { + case BR_CODE_COMPONENT_ID: + priv->fw_interface = be32_to_cpup((__be32 *) + bootrec->data); + switch (priv->fw_interface) { + case FW_LM86: + case FW_LM20: + case FW_LM87: { + char *iftype = (char *)bootrec->data; + wiphy_info(priv->hw->wiphy, + "p54 detected a LM%c%c firmware\n", + iftype[2], iftype[3]); + break; + } + case FW_FMAC: + default: + wiphy_err(priv->hw->wiphy, + "unsupported firmware\n"); + return -ENODEV; + } + break; + case BR_CODE_COMPONENT_VERSION: + /* 24 bytes should be enough for all firmwares */ + if (strnlen((unsigned char *) bootrec->data, 24) < 24) + fw_version = (unsigned char *) bootrec->data; + break; + case BR_CODE_DESCR: { + struct bootrec_desc *desc = + (struct bootrec_desc *)bootrec->data; + priv->rx_start = le32_to_cpu(desc->rx_start); + /* FIXME add sanity checking */ + priv->rx_end = le32_to_cpu(desc->rx_end) - 0x3500; + priv->headroom = desc->headroom; + priv->tailroom = desc->tailroom; + priv->privacy_caps = desc->privacy_caps; + priv->rx_keycache_size = desc->rx_keycache_size; + if (le32_to_cpu(bootrec->len) == 11) + priv->rx_mtu = le16_to_cpu(desc->rx_mtu); + else + priv->rx_mtu = (size_t) + 0x620 - priv->tx_hdr_len; + maxlen = priv->tx_hdr_len + /* USB devices */ + sizeof(struct p54_rx_data) + + 4 + /* rx alignment */ + IEEE80211_MAX_FRAG_THRESHOLD; + if (priv->rx_mtu > maxlen && PAGE_SIZE == 4096) { + printk(KERN_INFO "p54: rx_mtu reduced from %d " + "to %d\n", priv->rx_mtu, maxlen); + priv->rx_mtu = maxlen; + } + break; + } + case BR_CODE_EXPOSED_IF: + exp_if = (struct exp_if *) bootrec->data; + for (i = 0; i < (len * sizeof(*exp_if) / 4); i++) + if (exp_if[i].if_id == cpu_to_le16(IF_ID_LMAC)) + priv->fw_var = le16_to_cpu(exp_if[i].variant); + break; + case BR_CODE_DEPENDENT_IF: + break; + case BR_CODE_END_OF_BRA: + case LEGACY_BR_CODE_END_OF_BRA: + end_data = NULL; + break; + default: + break; + } + bootrec = (struct bootrec *)&bootrec->data[len]; + } + + if (fw_version) { + wiphy_info(priv->hw->wiphy, + "FW rev %s - Softmac protocol %x.%x\n", + fw_version, priv->fw_var >> 8, priv->fw_var & 0xff); + snprintf(dev->wiphy->fw_version, sizeof(dev->wiphy->fw_version), + "%s - %x.%x", fw_version, + priv->fw_var >> 8, priv->fw_var & 0xff); + } + + if (priv->fw_var < 0x500) + wiphy_info(priv->hw->wiphy, + "you are using an obsolete firmware. " + "visit http://wireless.kernel.org/en/users/Drivers/p54 " + "and grab one for \"kernel >= 2.6.28\"!\n"); + + if (priv->fw_var >= 0x300) { + /* Firmware supports QoS, use it! */ + + if (priv->fw_var >= 0x500) { + priv->tx_stats[P54_QUEUE_AC_VO].limit = 16; + priv->tx_stats[P54_QUEUE_AC_VI].limit = 16; + priv->tx_stats[P54_QUEUE_AC_BE].limit = 16; + priv->tx_stats[P54_QUEUE_AC_BK].limit = 16; + } else { + priv->tx_stats[P54_QUEUE_AC_VO].limit = 3; + priv->tx_stats[P54_QUEUE_AC_VI].limit = 4; + priv->tx_stats[P54_QUEUE_AC_BE].limit = 3; + priv->tx_stats[P54_QUEUE_AC_BK].limit = 2; + } + priv->hw->queues = P54_QUEUE_AC_NUM; + } + + wiphy_info(priv->hw->wiphy, + "cryptographic accelerator WEP:%s, TKIP:%s, CCMP:%s\n", + (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" : "no", + (priv->privacy_caps & + (BR_DESC_PRIV_CAP_TKIP | BR_DESC_PRIV_CAP_MICHAEL)) + ? "YES" : "no", + (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP) + ? "YES" : "no"); + + if (priv->rx_keycache_size) { + /* + * NOTE: + * + * The firmware provides at most 255 (0 - 254) slots + * for keys which are then used to offload decryption. + * As a result the 255 entry (aka 0xff) can be used + * safely by the driver to mark keys that didn't fit + * into the full cache. This trick saves us from + * keeping a extra list for uploaded keys. + */ + + priv->used_rxkeys = kzalloc(BITS_TO_LONGS( + priv->rx_keycache_size), GFP_KERNEL); + + if (!priv->used_rxkeys) + return -ENOMEM; + } + + return 0; +} +EXPORT_SYMBOL_GPL(p54_parse_firmware); + +static struct sk_buff *p54_alloc_skb(struct p54_common *priv, u16 hdr_flags, + u16 payload_len, u16 type, gfp_t memflags) +{ + struct p54_hdr *hdr; + struct sk_buff *skb; + size_t frame_len = sizeof(*hdr) + payload_len; + + if (frame_len > P54_MAX_CTRL_FRAME_LEN) + return NULL; + + if (unlikely(skb_queue_len(&priv->tx_pending) > 64)) + return NULL; + + skb = __dev_alloc_skb(priv->tx_hdr_len + frame_len, memflags); + if (!skb) + return NULL; + skb_reserve(skb, priv->tx_hdr_len); + + hdr = (struct p54_hdr *) skb_put(skb, sizeof(*hdr)); + hdr->flags = cpu_to_le16(hdr_flags); + hdr->len = cpu_to_le16(payload_len); + hdr->type = cpu_to_le16(type); + hdr->tries = hdr->rts_tries = 0; + return skb; +} + +int p54_download_eeprom(struct p54_common *priv, void *buf, + u16 offset, u16 len) +{ + struct p54_eeprom_lm86 *eeprom_hdr; + struct sk_buff *skb; + size_t eeprom_hdr_size; + int ret = 0; + long timeout; + + if (priv->fw_var >= 0x509) + eeprom_hdr_size = sizeof(*eeprom_hdr); + else + eeprom_hdr_size = 0x4; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL, eeprom_hdr_size + + len, P54_CONTROL_TYPE_EEPROM_READBACK, + GFP_KERNEL); + if (unlikely(!skb)) + return -ENOMEM; + + mutex_lock(&priv->eeprom_mutex); + priv->eeprom = buf; + eeprom_hdr = (struct p54_eeprom_lm86 *) skb_put(skb, + eeprom_hdr_size + len); + + if (priv->fw_var < 0x509) { + eeprom_hdr->v1.offset = cpu_to_le16(offset); + eeprom_hdr->v1.len = cpu_to_le16(len); + } else { + eeprom_hdr->v2.offset = cpu_to_le32(offset); + eeprom_hdr->v2.len = cpu_to_le16(len); + eeprom_hdr->v2.magic2 = 0xf; + memcpy(eeprom_hdr->v2.magic, (const char *)"LOCK", 4); + } + + p54_tx(priv, skb); + + timeout = wait_for_completion_interruptible_timeout( + &priv->eeprom_comp, HZ); + if (timeout <= 0) { + wiphy_err(priv->hw->wiphy, + "device does not respond or signal received!\n"); + ret = -EBUSY; + } + priv->eeprom = NULL; + mutex_unlock(&priv->eeprom_mutex); + return ret; +} + +int p54_update_beacon_tim(struct p54_common *priv, u16 aid, bool set) +{ + struct sk_buff *skb; + struct p54_tim *tim; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*tim), + P54_CONTROL_TYPE_TIM, GFP_ATOMIC); + if (unlikely(!skb)) + return -ENOMEM; + + tim = (struct p54_tim *) skb_put(skb, sizeof(*tim)); + tim->count = 1; + tim->entry[0] = cpu_to_le16(set ? (aid | 0x8000) : aid); + p54_tx(priv, skb); + return 0; +} + +int p54_sta_unlock(struct p54_common *priv, u8 *addr) +{ + struct sk_buff *skb; + struct p54_sta_unlock *sta; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*sta), + P54_CONTROL_TYPE_PSM_STA_UNLOCK, GFP_ATOMIC); + if (unlikely(!skb)) + return -ENOMEM; + + sta = (struct p54_sta_unlock *)skb_put(skb, sizeof(*sta)); + memcpy(sta->addr, addr, ETH_ALEN); + p54_tx(priv, skb); + return 0; +} + +int p54_tx_cancel(struct p54_common *priv, __le32 req_id) +{ + struct sk_buff *skb; + struct p54_txcancel *cancel; + u32 _req_id = le32_to_cpu(req_id); + + if (unlikely(_req_id < priv->rx_start || _req_id > priv->rx_end)) + return -EINVAL; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*cancel), + P54_CONTROL_TYPE_TXCANCEL, GFP_ATOMIC); + if (unlikely(!skb)) + return -ENOMEM; + + cancel = (struct p54_txcancel *)skb_put(skb, sizeof(*cancel)); + cancel->req_id = req_id; + p54_tx(priv, skb); + return 0; +} + +int p54_setup_mac(struct p54_common *priv) +{ + struct sk_buff *skb; + struct p54_setup_mac *setup; + u16 mode; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*setup), + P54_CONTROL_TYPE_SETUP, GFP_ATOMIC); + if (!skb) + return -ENOMEM; + + setup = (struct p54_setup_mac *) skb_put(skb, sizeof(*setup)); + if (!(priv->hw->conf.flags & IEEE80211_CONF_IDLE)) { + switch (priv->mode) { + case NL80211_IFTYPE_STATION: + mode = P54_FILTER_TYPE_STATION; + break; + case NL80211_IFTYPE_AP: + mode = P54_FILTER_TYPE_AP; + break; + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + mode = P54_FILTER_TYPE_IBSS; + break; + case NL80211_IFTYPE_MONITOR: + mode = P54_FILTER_TYPE_PROMISCUOUS; + break; + default: + mode = P54_FILTER_TYPE_HIBERNATE; + break; + } + + /* + * "TRANSPARENT and PROMISCUOUS are mutually exclusive" + * STSW45X0C LMAC API - page 12 + */ + if (priv->filter_flags & FIF_OTHER_BSS && + (mode != P54_FILTER_TYPE_PROMISCUOUS)) + mode |= P54_FILTER_TYPE_TRANSPARENT; + } else { + mode = P54_FILTER_TYPE_HIBERNATE; + } + + setup->mac_mode = cpu_to_le16(mode); + memcpy(setup->mac_addr, priv->mac_addr, ETH_ALEN); + memcpy(setup->bssid, priv->bssid, ETH_ALEN); + setup->rx_antenna = 2 & priv->rx_diversity_mask; /* automatic */ + setup->rx_align = 0; + if (priv->fw_var < 0x500) { + setup->v1.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask); + memset(setup->v1.rts_rates, 0, 8); + setup->v1.rx_addr = cpu_to_le32(priv->rx_end); + setup->v1.max_rx = cpu_to_le16(priv->rx_mtu); + setup->v1.rxhw = cpu_to_le16(priv->rxhw); + setup->v1.wakeup_timer = cpu_to_le16(priv->wakeup_timer); + setup->v1.unalloc0 = cpu_to_le16(0); + } else { + setup->v2.rx_addr = cpu_to_le32(priv->rx_end); + setup->v2.max_rx = cpu_to_le16(priv->rx_mtu); + setup->v2.rxhw = cpu_to_le16(priv->rxhw); + setup->v2.timer = cpu_to_le16(priv->wakeup_timer); + setup->v2.truncate = cpu_to_le16(48896); + setup->v2.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask); + setup->v2.sbss_offset = 0; + setup->v2.mcast_window = 0; + setup->v2.rx_rssi_threshold = 0; + setup->v2.rx_ed_threshold = 0; + setup->v2.ref_clock = cpu_to_le32(644245094); + setup->v2.lpf_bandwidth = cpu_to_le16(65535); + setup->v2.osc_start_delay = cpu_to_le16(65535); + } + p54_tx(priv, skb); + priv->phy_idle = mode == P54_FILTER_TYPE_HIBERNATE; + return 0; +} + +int p54_scan(struct p54_common *priv, u16 mode, u16 dwell) +{ + struct sk_buff *skb; + struct p54_hdr *hdr; + struct p54_scan_head *head; + struct p54_iq_autocal_entry *iq_autocal; + union p54_scan_body_union *body; + struct p54_scan_tail_rate *rate; + struct pda_rssi_cal_entry *rssi; + struct p54_rssi_db_entry *rssi_data; + unsigned int i; + void *entry; + __le16 freq = cpu_to_le16(priv->hw->conf.chandef.chan->center_freq); + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*head) + + 2 + sizeof(*iq_autocal) + sizeof(*body) + + sizeof(*rate) + 2 * sizeof(*rssi), + P54_CONTROL_TYPE_SCAN, GFP_ATOMIC); + if (!skb) + return -ENOMEM; + + head = (struct p54_scan_head *) skb_put(skb, sizeof(*head)); + memset(head->scan_params, 0, sizeof(head->scan_params)); + head->mode = cpu_to_le16(mode); + head->dwell = cpu_to_le16(dwell); + head->freq = freq; + + if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) { + __le16 *pa_power_points = (__le16 *) skb_put(skb, 2); + *pa_power_points = cpu_to_le16(0x0c); + } + + iq_autocal = (void *) skb_put(skb, sizeof(*iq_autocal)); + for (i = 0; i < priv->iq_autocal_len; i++) { + if (priv->iq_autocal[i].freq != freq) + continue; + + memcpy(iq_autocal, &priv->iq_autocal[i].params, + sizeof(struct p54_iq_autocal_entry)); + break; + } + if (i == priv->iq_autocal_len) + goto err; + + if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) + body = (void *) skb_put(skb, sizeof(body->longbow)); + else + body = (void *) skb_put(skb, sizeof(body->normal)); + + for (i = 0; i < priv->output_limit->entries; i++) { + __le16 *entry_freq = (void *) (priv->output_limit->data + + priv->output_limit->entry_size * i); + + if (*entry_freq != freq) + continue; + + if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) { + memcpy(&body->longbow.power_limits, + (void *) entry_freq + sizeof(__le16), + priv->output_limit->entry_size); + } else { + struct pda_channel_output_limit *limits = + (void *) entry_freq; + + body->normal.val_barker = 0x38; + body->normal.val_bpsk = body->normal.dup_bpsk = + limits->val_bpsk; + body->normal.val_qpsk = body->normal.dup_qpsk = + limits->val_qpsk; + body->normal.val_16qam = body->normal.dup_16qam = + limits->val_16qam; + body->normal.val_64qam = body->normal.dup_64qam = + limits->val_64qam; + } + break; + } + if (i == priv->output_limit->entries) + goto err; + + entry = (void *)(priv->curve_data->data + priv->curve_data->offset); + for (i = 0; i < priv->curve_data->entries; i++) { + if (*((__le16 *)entry) != freq) { + entry += priv->curve_data->entry_size; + continue; + } + + if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) { + memcpy(&body->longbow.curve_data, + entry + sizeof(__le16), + priv->curve_data->entry_size); + } else { + struct p54_scan_body *chan = &body->normal; + struct pda_pa_curve_data *curve_data = + (void *) priv->curve_data->data; + + entry += sizeof(__le16); + chan->pa_points_per_curve = 8; + memset(chan->curve_data, 0, sizeof(*chan->curve_data)); + memcpy(chan->curve_data, entry, + sizeof(struct p54_pa_curve_data_sample) * + min((u8)8, curve_data->points_per_channel)); + } + break; + } + if (i == priv->curve_data->entries) + goto err; + + if ((priv->fw_var >= 0x500) && (priv->fw_var < 0x509)) { + rate = (void *) skb_put(skb, sizeof(*rate)); + rate->basic_rate_mask = cpu_to_le32(priv->basic_rate_mask); + for (i = 0; i < sizeof(rate->rts_rates); i++) + rate->rts_rates[i] = i; + } + + rssi = (struct pda_rssi_cal_entry *) skb_put(skb, sizeof(*rssi)); + rssi_data = p54_rssi_find(priv, le16_to_cpu(freq)); + rssi->mul = cpu_to_le16(rssi_data->mul); + rssi->add = cpu_to_le16(rssi_data->add); + if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) { + /* Longbow frontend needs ever more */ + rssi = (void *) skb_put(skb, sizeof(*rssi)); + rssi->mul = cpu_to_le16(rssi_data->longbow_unkn); + rssi->add = cpu_to_le16(rssi_data->longbow_unk2); + } + + if (priv->fw_var >= 0x509) { + rate = (void *) skb_put(skb, sizeof(*rate)); + rate->basic_rate_mask = cpu_to_le32(priv->basic_rate_mask); + for (i = 0; i < sizeof(rate->rts_rates); i++) + rate->rts_rates[i] = i; + } + + hdr = (struct p54_hdr *) skb->data; + hdr->len = cpu_to_le16(skb->len - sizeof(*hdr)); + + p54_tx(priv, skb); + priv->cur_rssi = rssi_data; + return 0; + +err: + wiphy_err(priv->hw->wiphy, "frequency change to channel %d failed.\n", + ieee80211_frequency_to_channel( + priv->hw->conf.chandef.chan->center_freq)); + + dev_kfree_skb_any(skb); + return -EINVAL; +} + +int p54_set_leds(struct p54_common *priv) +{ + struct sk_buff *skb; + struct p54_led *led; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*led), + P54_CONTROL_TYPE_LED, GFP_ATOMIC); + if (unlikely(!skb)) + return -ENOMEM; + + led = (struct p54_led *) skb_put(skb, sizeof(*led)); + led->flags = cpu_to_le16(0x0003); + led->mask[0] = led->mask[1] = cpu_to_le16(priv->softled_state); + led->delay[0] = cpu_to_le16(1); + led->delay[1] = cpu_to_le16(0); + p54_tx(priv, skb); + return 0; +} + +int p54_set_edcf(struct p54_common *priv) +{ + struct sk_buff *skb; + struct p54_edcf *edcf; + u8 rtd; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*edcf), + P54_CONTROL_TYPE_DCFINIT, GFP_ATOMIC); + if (unlikely(!skb)) + return -ENOMEM; + + edcf = (struct p54_edcf *)skb_put(skb, sizeof(*edcf)); + if (priv->use_short_slot) { + edcf->slottime = 9; + edcf->sifs = 0x10; + edcf->eofpad = 0x00; + } else { + edcf->slottime = 20; + edcf->sifs = 0x0a; + edcf->eofpad = 0x06; + } + /* + * calculate the extra round trip delay according to the + * formula from 802.11-2007 17.3.8.6. + */ + rtd = 3 * priv->coverage_class; + edcf->slottime += rtd; + edcf->round_trip_delay = cpu_to_le16(rtd); + /* (see prism54/isl_oid.h for further details) */ + edcf->frameburst = cpu_to_le16(0); + edcf->flags = 0; + memset(edcf->mapping, 0, sizeof(edcf->mapping)); + memcpy(edcf->queue, priv->qos_params, sizeof(edcf->queue)); + p54_tx(priv, skb); + return 0; +} + +int p54_set_ps(struct p54_common *priv) +{ + struct sk_buff *skb; + struct p54_psm *psm; + unsigned int i; + u16 mode; + + if (priv->hw->conf.flags & IEEE80211_CONF_PS && + !priv->powersave_override) + mode = P54_PSM | P54_PSM_BEACON_TIMEOUT | P54_PSM_DTIM | + P54_PSM_CHECKSUM | P54_PSM_MCBC; + else + mode = P54_PSM_CAM; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*psm), + P54_CONTROL_TYPE_PSM, GFP_ATOMIC); + if (!skb) + return -ENOMEM; + + psm = (struct p54_psm *)skb_put(skb, sizeof(*psm)); + psm->mode = cpu_to_le16(mode); + psm->aid = cpu_to_le16(priv->aid); + for (i = 0; i < ARRAY_SIZE(psm->intervals); i++) { + psm->intervals[i].interval = + cpu_to_le16(priv->hw->conf.listen_interval); + psm->intervals[i].periods = cpu_to_le16(1); + } + + psm->beacon_rssi_skip_max = 200; + psm->rssi_delta_threshold = 0; + psm->nr = 1; + psm->exclude[0] = WLAN_EID_TIM; + + p54_tx(priv, skb); + priv->phy_ps = mode != P54_PSM_CAM; + return 0; +} + +int p54_init_xbow_synth(struct p54_common *priv) +{ + struct sk_buff *skb; + struct p54_xbow_synth *xbow; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*xbow), + P54_CONTROL_TYPE_XBOW_SYNTH_CFG, GFP_KERNEL); + if (unlikely(!skb)) + return -ENOMEM; + + xbow = (struct p54_xbow_synth *)skb_put(skb, sizeof(*xbow)); + xbow->magic1 = cpu_to_le16(0x1); + xbow->magic2 = cpu_to_le16(0x2); + xbow->freq = cpu_to_le16(5390); + memset(xbow->padding, 0, sizeof(xbow->padding)); + p54_tx(priv, skb); + return 0; +} + +int p54_upload_key(struct p54_common *priv, u8 algo, int slot, u8 idx, u8 len, + u8 *addr, u8* key) +{ + struct sk_buff *skb; + struct p54_keycache *rxkey; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*rxkey), + P54_CONTROL_TYPE_RX_KEYCACHE, GFP_KERNEL); + if (unlikely(!skb)) + return -ENOMEM; + + rxkey = (struct p54_keycache *)skb_put(skb, sizeof(*rxkey)); + rxkey->entry = slot; + rxkey->key_id = idx; + rxkey->key_type = algo; + if (addr) + memcpy(rxkey->mac, addr, ETH_ALEN); + else + eth_broadcast_addr(rxkey->mac); + + switch (algo) { + case P54_CRYPTO_WEP: + case P54_CRYPTO_AESCCMP: + rxkey->key_len = min_t(u8, 16, len); + memcpy(rxkey->key, key, rxkey->key_len); + break; + + case P54_CRYPTO_TKIPMICHAEL: + rxkey->key_len = 24; + memcpy(rxkey->key, key, 16); + memcpy(&(rxkey->key[16]), &(key + [NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY]), 8); + break; + + case P54_CRYPTO_NONE: + rxkey->key_len = 0; + memset(rxkey->key, 0, sizeof(rxkey->key)); + break; + + default: + wiphy_err(priv->hw->wiphy, + "invalid cryptographic algorithm: %d\n", algo); + dev_kfree_skb(skb); + return -EINVAL; + } + + p54_tx(priv, skb); + return 0; +} + +int p54_fetch_statistics(struct p54_common *priv) +{ + struct ieee80211_tx_info *txinfo; + struct p54_tx_info *p54info; + struct sk_buff *skb; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL, + sizeof(struct p54_statistics), + P54_CONTROL_TYPE_STAT_READBACK, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + /* + * The statistic feedback causes some extra headaches here, if it + * is not to crash/corrupt the firmware data structures. + * + * Unlike all other Control Get OIDs we can not use helpers like + * skb_put to reserve the space for the data we're requesting. + * Instead the extra frame length -which will hold the results later- + * will only be told to the p54_assign_address, so that following + * frames won't be placed into the allegedly empty area. + */ + txinfo = IEEE80211_SKB_CB(skb); + p54info = (void *) txinfo->rate_driver_data; + p54info->extra_len = sizeof(struct p54_statistics); + + p54_tx(priv, skb); + return 0; +} + +int p54_set_groupfilter(struct p54_common *priv) +{ + struct p54_group_address_table *grp; + struct sk_buff *skb; + bool on = false; + + skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*grp), + P54_CONTROL_TYPE_GROUP_ADDRESS_TABLE, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + grp = (struct p54_group_address_table *)skb_put(skb, sizeof(*grp)); + + on = !(priv->filter_flags & FIF_ALLMULTI) && + (priv->mc_maclist_num > 0 && + priv->mc_maclist_num <= MC_FILTER_ADDRESS_NUM); + + if (on) { + grp->filter_enable = cpu_to_le16(1); + grp->num_address = cpu_to_le16(priv->mc_maclist_num); + memcpy(grp->mac_list, priv->mc_maclist, sizeof(grp->mac_list)); + } else { + grp->filter_enable = cpu_to_le16(0); + grp->num_address = cpu_to_le16(0); + memset(grp->mac_list, 0, sizeof(grp->mac_list)); + } + + p54_tx(priv, skb); + return 0; +} diff --git a/drivers/net/wireless/intersil/p54/led.c b/drivers/net/wireless/intersil/p54/led.c new file mode 100644 index 000000000..9a8fedd3c --- /dev/null +++ b/drivers/net/wireless/intersil/p54/led.c @@ -0,0 +1,161 @@ +/* + * Common code for mac80211 Prism54 drivers + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * Based on: + * - the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * - stlc45xx driver + * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/firmware.h> +#include <linux/etherdevice.h> + +#include <net/mac80211.h> +#ifdef CONFIG_P54_LEDS +#include <linux/leds.h> +#endif /* CONFIG_P54_LEDS */ + +#include "p54.h" +#include "lmac.h" + +static void p54_update_leds(struct work_struct *work) +{ + struct p54_common *priv = container_of(work, struct p54_common, + led_work.work); + int err, i, tmp, blink_delay = 400; + bool rerun = false; + + /* Don't toggle the LED, when the device is down. */ + if (priv->mode == NL80211_IFTYPE_UNSPECIFIED) + return ; + + for (i = 0; i < ARRAY_SIZE(priv->leds); i++) + if (priv->leds[i].toggled) { + priv->softled_state |= BIT(i); + + tmp = 70 + 200 / (priv->leds[i].toggled); + if (tmp < blink_delay) + blink_delay = tmp; + + if (priv->leds[i].led_dev.brightness == LED_OFF) + rerun = true; + + priv->leds[i].toggled = + !!priv->leds[i].led_dev.brightness; + } else + priv->softled_state &= ~BIT(i); + + err = p54_set_leds(priv); + if (err && net_ratelimit()) + wiphy_err(priv->hw->wiphy, + "failed to update LEDs (%d).\n", err); + + if (rerun) + ieee80211_queue_delayed_work(priv->hw, &priv->led_work, + msecs_to_jiffies(blink_delay)); +} + +static void p54_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct p54_led_dev *led = container_of(led_dev, struct p54_led_dev, + led_dev); + struct ieee80211_hw *dev = led->hw_dev; + struct p54_common *priv = dev->priv; + + if (priv->mode == NL80211_IFTYPE_UNSPECIFIED) + return ; + + if ((brightness) && (led->registered)) { + led->toggled++; + ieee80211_queue_delayed_work(priv->hw, &priv->led_work, HZ/10); + } +} + +static int p54_register_led(struct p54_common *priv, + unsigned int led_index, + char *name, const char *trigger) +{ + struct p54_led_dev *led = &priv->leds[led_index]; + int err; + + if (led->registered) + return -EEXIST; + + snprintf(led->name, sizeof(led->name), "p54-%s::%s", + wiphy_name(priv->hw->wiphy), name); + led->hw_dev = priv->hw; + led->index = led_index; + led->led_dev.name = led->name; + led->led_dev.default_trigger = trigger; + led->led_dev.brightness_set = p54_led_brightness_set; + + err = led_classdev_register(wiphy_dev(priv->hw->wiphy), &led->led_dev); + if (err) + wiphy_err(priv->hw->wiphy, + "Failed to register %s LED.\n", name); + else + led->registered = 1; + + return err; +} + +int p54_init_leds(struct p54_common *priv) +{ + int err; + + /* + * TODO: + * Figure out if the EEPROM contains some hints about the number + * of available/programmable LEDs of the device. + */ + + INIT_DELAYED_WORK(&priv->led_work, p54_update_leds); + + err = p54_register_led(priv, 0, "assoc", + ieee80211_get_assoc_led_name(priv->hw)); + if (err) + return err; + + err = p54_register_led(priv, 1, "tx", + ieee80211_get_tx_led_name(priv->hw)); + if (err) + return err; + + err = p54_register_led(priv, 2, "rx", + ieee80211_get_rx_led_name(priv->hw)); + if (err) + return err; + + err = p54_register_led(priv, 3, "radio", + ieee80211_get_radio_led_name(priv->hw)); + if (err) + return err; + + err = p54_set_leds(priv); + return err; +} + +void p54_unregister_leds(struct p54_common *priv) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(priv->leds); i++) { + if (priv->leds[i].registered) { + priv->leds[i].registered = false; + priv->leds[i].toggled = 0; + led_classdev_unregister(&priv->leds[i].led_dev); + } + } + + cancel_delayed_work_sync(&priv->led_work); +} diff --git a/drivers/net/wireless/intersil/p54/lmac.h b/drivers/net/wireless/intersil/p54/lmac.h new file mode 100644 index 000000000..de1d46bf9 --- /dev/null +++ b/drivers/net/wireless/intersil/p54/lmac.h @@ -0,0 +1,562 @@ +/* + * LMAC Interface specific definitions for mac80211 Prism54 drivers + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2007 - 2009, Christian Lamparter <chunkeey@web.de> + * + * Based on: + * - the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * - LMAC API interface header file for STLC4560 (lmac_longbow.h) + * Copyright (C) 2007 Conexant Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef LMAC_H +#define LMAC_H + +enum p54_control_frame_types { + P54_CONTROL_TYPE_SETUP = 0, + P54_CONTROL_TYPE_SCAN, + P54_CONTROL_TYPE_TRAP, + P54_CONTROL_TYPE_DCFINIT, + P54_CONTROL_TYPE_RX_KEYCACHE, + P54_CONTROL_TYPE_TIM, + P54_CONTROL_TYPE_PSM, + P54_CONTROL_TYPE_TXCANCEL, + P54_CONTROL_TYPE_TXDONE, + P54_CONTROL_TYPE_BURST, + P54_CONTROL_TYPE_STAT_READBACK, + P54_CONTROL_TYPE_BBP, + P54_CONTROL_TYPE_EEPROM_READBACK, + P54_CONTROL_TYPE_LED, + P54_CONTROL_TYPE_GPIO, + P54_CONTROL_TYPE_TIMER, + P54_CONTROL_TYPE_MODULATION, + P54_CONTROL_TYPE_SYNTH_CONFIG, + P54_CONTROL_TYPE_DETECTOR_VALUE, + P54_CONTROL_TYPE_XBOW_SYNTH_CFG, + P54_CONTROL_TYPE_CCE_QUIET, + P54_CONTROL_TYPE_PSM_STA_UNLOCK, + P54_CONTROL_TYPE_PCS, + P54_CONTROL_TYPE_BT_BALANCER = 28, + P54_CONTROL_TYPE_GROUP_ADDRESS_TABLE = 30, + P54_CONTROL_TYPE_ARPTABLE = 31, + P54_CONTROL_TYPE_BT_OPTIONS = 35, +}; + +#define P54_HDR_FLAG_CONTROL BIT(15) +#define P54_HDR_FLAG_CONTROL_OPSET (BIT(15) + BIT(0)) +#define P54_HDR_FLAG_DATA_ALIGN BIT(14) + +#define P54_HDR_FLAG_DATA_OUT_PROMISC BIT(0) +#define P54_HDR_FLAG_DATA_OUT_TIMESTAMP BIT(1) +#define P54_HDR_FLAG_DATA_OUT_SEQNR BIT(2) +#define P54_HDR_FLAG_DATA_OUT_BIT3 BIT(3) +#define P54_HDR_FLAG_DATA_OUT_BURST BIT(4) +#define P54_HDR_FLAG_DATA_OUT_NOCANCEL BIT(5) +#define P54_HDR_FLAG_DATA_OUT_CLEARTIM BIT(6) +#define P54_HDR_FLAG_DATA_OUT_HITCHHIKE BIT(7) +#define P54_HDR_FLAG_DATA_OUT_COMPRESS BIT(8) +#define P54_HDR_FLAG_DATA_OUT_CONCAT BIT(9) +#define P54_HDR_FLAG_DATA_OUT_PCS_ACCEPT BIT(10) +#define P54_HDR_FLAG_DATA_OUT_WAITEOSP BIT(11) + +#define P54_HDR_FLAG_DATA_IN_FCS_GOOD BIT(0) +#define P54_HDR_FLAG_DATA_IN_MATCH_MAC BIT(1) +#define P54_HDR_FLAG_DATA_IN_MCBC BIT(2) +#define P54_HDR_FLAG_DATA_IN_BEACON BIT(3) +#define P54_HDR_FLAG_DATA_IN_MATCH_BSS BIT(4) +#define P54_HDR_FLAG_DATA_IN_BCAST_BSS BIT(5) +#define P54_HDR_FLAG_DATA_IN_DATA BIT(6) +#define P54_HDR_FLAG_DATA_IN_TRUNCATED BIT(7) +#define P54_HDR_FLAG_DATA_IN_BIT8 BIT(8) +#define P54_HDR_FLAG_DATA_IN_TRANSPARENT BIT(9) + +struct p54_hdr { + __le16 flags; + __le16 len; + __le32 req_id; + __le16 type; /* enum p54_control_frame_types */ + u8 rts_tries; + u8 tries; + u8 data[0]; +} __packed; + +#define GET_REQ_ID(skb) \ + (((struct p54_hdr *) ((struct sk_buff *) skb)->data)->req_id) \ + +#define FREE_AFTER_TX(skb) \ + ((((struct p54_hdr *) ((struct sk_buff *) skb)->data)-> \ + flags) == cpu_to_le16(P54_HDR_FLAG_CONTROL_OPSET)) + +#define IS_DATA_FRAME(skb) \ + (!((((struct p54_hdr *) ((struct sk_buff *) skb)->data)-> \ + flags) & cpu_to_le16(P54_HDR_FLAG_CONTROL))) + +#define GET_HW_QUEUE(skb) \ + (((struct p54_tx_data *)((struct p54_hdr *) \ + skb->data)->data)->hw_queue) + +/* + * shared interface ID definitions + * The interface ID is a unique identification of a specific interface. + * The following values are reserved: 0x0000, 0x0002, 0x0012, 0x0014, 0x0015 + */ +#define IF_ID_ISL36356A 0x0001 /* ISL36356A <-> Firmware */ +#define IF_ID_MVC 0x0003 /* MAC Virtual Coprocessor */ +#define IF_ID_DEBUG 0x0008 /* PolDebug Interface */ +#define IF_ID_PRODUCT 0x0009 +#define IF_ID_OEM 0x000a +#define IF_ID_PCI3877 0x000b /* 3877 <-> Host PCI */ +#define IF_ID_ISL37704C 0x000c /* ISL37704C <-> Fw */ +#define IF_ID_ISL39000 0x000f /* ISL39000 <-> Fw */ +#define IF_ID_ISL39300A 0x0010 /* ISL39300A <-> Fw */ +#define IF_ID_ISL37700_UAP 0x0016 /* ISL37700 uAP Fw <-> Fw */ +#define IF_ID_ISL39000_UAP 0x0017 /* ISL39000 uAP Fw <-> Fw */ +#define IF_ID_LMAC 0x001a /* Interface exposed by LMAC */ + +struct exp_if { + __le16 role; + __le16 if_id; + __le16 variant; + __le16 btm_compat; + __le16 top_compat; +} __packed; + +struct dep_if { + __le16 role; + __le16 if_id; + __le16 variant; +} __packed; + +/* driver <-> lmac definitions */ +struct p54_eeprom_lm86 { + union { + struct { + __le16 offset; + __le16 len; + u8 data[0]; + } __packed v1; + struct { + __le32 offset; + __le16 len; + u8 magic2; + u8 pad; + u8 magic[4]; + u8 data[0]; + } __packed v2; + } __packed; +} __packed; + +enum p54_rx_decrypt_status { + P54_DECRYPT_NONE = 0, + P54_DECRYPT_OK, + P54_DECRYPT_NOKEY, + P54_DECRYPT_NOMICHAEL, + P54_DECRYPT_NOCKIPMIC, + P54_DECRYPT_FAIL_WEP, + P54_DECRYPT_FAIL_TKIP, + P54_DECRYPT_FAIL_MICHAEL, + P54_DECRYPT_FAIL_CKIPKP, + P54_DECRYPT_FAIL_CKIPMIC, + P54_DECRYPT_FAIL_AESCCMP +}; + +struct p54_rx_data { + __le16 flags; + __le16 len; + __le16 freq; + u8 antenna; + u8 rate; + u8 rssi; + u8 quality; + u8 decrypt_status; + u8 rssi_raw; + __le32 tsf32; + __le32 unalloc0; + u8 align[0]; +} __packed; + +enum p54_trap_type { + P54_TRAP_SCAN = 0, + P54_TRAP_TIMER, + P54_TRAP_BEACON_TX, + P54_TRAP_FAA_RADIO_ON, + P54_TRAP_FAA_RADIO_OFF, + P54_TRAP_RADAR, + P54_TRAP_NO_BEACON, + P54_TRAP_TBTT, + P54_TRAP_SCO_ENTER, + P54_TRAP_SCO_EXIT +}; + +struct p54_trap { + __le16 event; + __le16 frequency; +} __packed; + +enum p54_frame_sent_status { + P54_TX_OK = 0, + P54_TX_FAILED, + P54_TX_PSM, + P54_TX_PSM_CANCELLED = 4 +}; + +struct p54_frame_sent { + u8 status; + u8 tries; + u8 ack_rssi; + u8 quality; + __le16 seq; + u8 antenna; + u8 padding; +} __packed; + +enum p54_tx_data_crypt { + P54_CRYPTO_NONE = 0, + P54_CRYPTO_WEP, + P54_CRYPTO_TKIP, + P54_CRYPTO_TKIPMICHAEL, + P54_CRYPTO_CCX_WEPMIC, + P54_CRYPTO_CCX_KPMIC, + P54_CRYPTO_CCX_KP, + P54_CRYPTO_AESCCMP +}; + +enum p54_tx_data_queue { + P54_QUEUE_BEACON = 0, + P54_QUEUE_FWSCAN = 1, + P54_QUEUE_MGMT = 2, + P54_QUEUE_CAB = 3, + P54_QUEUE_DATA = 4, + + P54_QUEUE_AC_NUM = 4, + P54_QUEUE_AC_VO = 4, + P54_QUEUE_AC_VI = 5, + P54_QUEUE_AC_BE = 6, + P54_QUEUE_AC_BK = 7, + + /* keep last */ + P54_QUEUE_NUM = 8, +}; + +#define IS_QOS_QUEUE(n) (n >= P54_QUEUE_DATA) + +struct p54_tx_data { + u8 rateset[8]; + u8 rts_rate_idx; + u8 crypt_offset; + u8 key_type; + u8 key_len; + u8 key[16]; + u8 hw_queue; + u8 backlog; + __le16 durations[4]; + u8 tx_antenna; + union { + struct { + u8 cts_rate; + __le16 output_power; + } __packed longbow; + struct { + u8 output_power; + u8 cts_rate; + u8 unalloc; + } __packed normal; + } __packed; + u8 unalloc2[2]; + u8 align[0]; +} __packed; + +/* unit is ms */ +#define P54_TX_FRAME_LIFETIME 2000 +#define P54_TX_TIMEOUT 4000 +#define P54_STATISTICS_UPDATE 5000 + +#define P54_FILTER_TYPE_NONE 0 +#define P54_FILTER_TYPE_STATION BIT(0) +#define P54_FILTER_TYPE_IBSS BIT(1) +#define P54_FILTER_TYPE_AP BIT(2) +#define P54_FILTER_TYPE_TRANSPARENT BIT(3) +#define P54_FILTER_TYPE_PROMISCUOUS BIT(4) +#define P54_FILTER_TYPE_HIBERNATE BIT(5) +#define P54_FILTER_TYPE_NOACK BIT(6) +#define P54_FILTER_TYPE_RX_DISABLED BIT(7) + +struct p54_setup_mac { + __le16 mac_mode; + u8 mac_addr[ETH_ALEN]; + u8 bssid[ETH_ALEN]; + u8 rx_antenna; + u8 rx_align; + union { + struct { + __le32 basic_rate_mask; + u8 rts_rates[8]; + __le32 rx_addr; + __le16 max_rx; + __le16 rxhw; + __le16 wakeup_timer; + __le16 unalloc0; + } __packed v1; + struct { + __le32 rx_addr; + __le16 max_rx; + __le16 rxhw; + __le16 timer; + __le16 truncate; + __le32 basic_rate_mask; + u8 sbss_offset; + u8 mcast_window; + u8 rx_rssi_threshold; + u8 rx_ed_threshold; + __le32 ref_clock; + __le16 lpf_bandwidth; + __le16 osc_start_delay; + } __packed v2; + } __packed; +} __packed; + +#define P54_SETUP_V1_LEN 40 +#define P54_SETUP_V2_LEN (sizeof(struct p54_setup_mac)) + +#define P54_SCAN_EXIT BIT(0) +#define P54_SCAN_TRAP BIT(1) +#define P54_SCAN_ACTIVE BIT(2) +#define P54_SCAN_FILTER BIT(3) + +struct p54_scan_head { + __le16 mode; + __le16 dwell; + u8 scan_params[20]; + __le16 freq; +} __packed; + +struct p54_pa_curve_data_sample { + u8 rf_power; + u8 pa_detector; + u8 data_barker; + u8 data_bpsk; + u8 data_qpsk; + u8 data_16qam; + u8 data_64qam; + u8 padding; +} __packed; + +struct p54_scan_body { + u8 pa_points_per_curve; + u8 val_barker; + u8 val_bpsk; + u8 val_qpsk; + u8 val_16qam; + u8 val_64qam; + struct p54_pa_curve_data_sample curve_data[8]; + u8 dup_bpsk; + u8 dup_qpsk; + u8 dup_16qam; + u8 dup_64qam; +} __packed; + +/* + * Warning: Longbow's structures are bogus. + */ +struct p54_channel_output_limit_longbow { + __le16 rf_power_points[12]; +} __packed; + +struct p54_pa_curve_data_sample_longbow { + __le16 rf_power; + __le16 pa_detector; + struct { + __le16 data[4]; + } points[3] __packed; +} __packed; + +struct p54_scan_body_longbow { + struct p54_channel_output_limit_longbow power_limits; + struct p54_pa_curve_data_sample_longbow curve_data[8]; + __le16 unkn[6]; /* maybe more power_limits or rate_mask */ +} __packed; + +union p54_scan_body_union { + struct p54_scan_body normal; + struct p54_scan_body_longbow longbow; +} __packed; + +struct p54_scan_tail_rate { + __le32 basic_rate_mask; + u8 rts_rates[8]; +} __packed; + +struct p54_led { + __le16 flags; + __le16 mask[2]; + __le16 delay[2]; +} __packed; + +struct p54_edcf { + u8 flags; + u8 slottime; + u8 sifs; + u8 eofpad; + struct p54_edcf_queue_param queue[8]; + u8 mapping[4]; + __le16 frameburst; + __le16 round_trip_delay; +} __packed; + +struct p54_statistics { + __le32 rx_success; + __le32 rx_bad_fcs; + __le32 rx_abort; + __le32 rx_abort_phy; + __le32 rts_success; + __le32 rts_fail; + __le32 tsf32; + __le32 airtime; + __le32 noise; + __le32 sample_noise[8]; + __le32 sample_cca; + __le32 sample_tx; +} __packed; + +struct p54_xbow_synth { + __le16 magic1; + __le16 magic2; + __le16 freq; + u32 padding[5]; +} __packed; + +struct p54_timer { + __le32 interval; +} __packed; + +struct p54_keycache { + u8 entry; + u8 key_id; + u8 mac[ETH_ALEN]; + u8 padding[2]; + u8 key_type; + u8 key_len; + u8 key[24]; +} __packed; + +struct p54_burst { + u8 flags; + u8 queue; + u8 backlog; + u8 pad; + __le16 durations[32]; +} __packed; + +struct p54_psm_interval { + __le16 interval; + __le16 periods; +} __packed; + +#define P54_PSM_CAM 0 +#define P54_PSM BIT(0) +#define P54_PSM_DTIM BIT(1) +#define P54_PSM_MCBC BIT(2) +#define P54_PSM_CHECKSUM BIT(3) +#define P54_PSM_SKIP_MORE_DATA BIT(4) +#define P54_PSM_BEACON_TIMEOUT BIT(5) +#define P54_PSM_HFOSLEEP BIT(6) +#define P54_PSM_AUTOSWITCH_SLEEP BIT(7) +#define P54_PSM_LPIT BIT(8) +#define P54_PSM_BF_UCAST_SKIP BIT(9) +#define P54_PSM_BF_MCAST_SKIP BIT(10) + +struct p54_psm { + __le16 mode; + __le16 aid; + struct p54_psm_interval intervals[4]; + u8 beacon_rssi_skip_max; + u8 rssi_delta_threshold; + u8 nr; + u8 exclude[1]; +} __packed; + +#define MC_FILTER_ADDRESS_NUM 4 + +struct p54_group_address_table { + __le16 filter_enable; + __le16 num_address; + u8 mac_list[MC_FILTER_ADDRESS_NUM][ETH_ALEN]; +} __packed; + +struct p54_txcancel { + __le32 req_id; +} __packed; + +struct p54_sta_unlock { + u8 addr[ETH_ALEN]; + u16 padding; +} __packed; + +#define P54_TIM_CLEAR BIT(15) +struct p54_tim { + u8 count; + u8 padding[3]; + __le16 entry[8]; +} __packed; + +struct p54_cce_quiet { + __le32 period; +} __packed; + +struct p54_bt_balancer { + __le16 prio_thresh; + __le16 acl_thresh; +} __packed; + +struct p54_arp_table { + __le16 filter_enable; + u8 ipv4_addr[4]; +} __packed; + +/* LED control */ +int p54_set_leds(struct p54_common *priv); +int p54_init_leds(struct p54_common *priv); +void p54_unregister_leds(struct p54_common *priv); + +/* xmit functions */ +void p54_tx_80211(struct ieee80211_hw *dev, + struct ieee80211_tx_control *control, + struct sk_buff *skb); +int p54_tx_cancel(struct p54_common *priv, __le32 req_id); +void p54_tx(struct p54_common *priv, struct sk_buff *skb); + +/* synth/phy configuration */ +int p54_init_xbow_synth(struct p54_common *priv); +int p54_scan(struct p54_common *priv, u16 mode, u16 dwell); + +/* MAC */ +int p54_sta_unlock(struct p54_common *priv, u8 *addr); +int p54_update_beacon_tim(struct p54_common *priv, u16 aid, bool set); +int p54_setup_mac(struct p54_common *priv); +int p54_set_ps(struct p54_common *priv); +int p54_fetch_statistics(struct p54_common *priv); +int p54_set_groupfilter(struct p54_common *priv); + +/* e/v DCF setup */ +int p54_set_edcf(struct p54_common *priv); + +/* cryptographic engine */ +int p54_upload_key(struct p54_common *priv, u8 algo, int slot, + u8 idx, u8 len, u8 *addr, u8* key); + +/* eeprom */ +int p54_download_eeprom(struct p54_common *priv, void *buf, + u16 offset, u16 len); +struct p54_rssi_db_entry *p54_rssi_find(struct p54_common *p, const u16 freq); + +/* utility */ +u8 *p54_find_ie(struct sk_buff *skb, u8 ie); + +#endif /* LMAC_H */ diff --git a/drivers/net/wireless/intersil/p54/main.c b/drivers/net/wireless/intersil/p54/main.c new file mode 100644 index 000000000..7805864e7 --- /dev/null +++ b/drivers/net/wireless/intersil/p54/main.c @@ -0,0 +1,867 @@ +/* + * mac80211 glue code for mac80211 Prism54 drivers + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * Based on: + * - the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * - stlc45xx driver + * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/slab.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <linux/module.h> + +#include <net/mac80211.h> + +#include "p54.h" +#include "lmac.h" + +static bool modparam_nohwcrypt; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); +MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); +MODULE_DESCRIPTION("Softmac Prism54 common code"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("prism54common"); + +static int p54_sta_add_remove(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct p54_common *priv = hw->priv; + + /* + * Notify the firmware that we don't want or we don't + * need to buffer frames for this station anymore. + */ + + p54_sta_unlock(priv, sta->addr); + + return 0; +} + +static void p54_sta_notify(struct ieee80211_hw *dev, struct ieee80211_vif *vif, + enum sta_notify_cmd notify_cmd, + struct ieee80211_sta *sta) +{ + struct p54_common *priv = dev->priv; + + switch (notify_cmd) { + case STA_NOTIFY_AWAKE: + /* update the firmware's filter table */ + p54_sta_unlock(priv, sta->addr); + break; + default: + break; + } +} + +static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta, + bool set) +{ + struct p54_common *priv = dev->priv; + + return p54_update_beacon_tim(priv, sta->aid, set); +} + +u8 *p54_find_ie(struct sk_buff *skb, u8 ie) +{ + struct ieee80211_mgmt *mgmt = (void *)skb->data; + u8 *pos, *end; + + if (skb->len <= sizeof(mgmt)) + return NULL; + + pos = (u8 *)mgmt->u.beacon.variable; + end = skb->data + skb->len; + while (pos < end) { + if (pos + 2 + pos[1] > end) + return NULL; + + if (pos[0] == ie) + return pos; + + pos += 2 + pos[1]; + } + return NULL; +} + +static int p54_beacon_format_ie_tim(struct sk_buff *skb) +{ + /* + * the good excuse for this mess is ... the firmware. + * The dummy TIM MUST be at the end of the beacon frame, + * because it'll be overwritten! + */ + u8 *tim; + u8 dtim_len; + u8 dtim_period; + u8 *next; + + tim = p54_find_ie(skb, WLAN_EID_TIM); + if (!tim) + return 0; + + dtim_len = tim[1]; + dtim_period = tim[3]; + next = tim + 2 + dtim_len; + + if (dtim_len < 3) + return -EINVAL; + + memmove(tim, next, skb_tail_pointer(skb) - next); + tim = skb_tail_pointer(skb) - (dtim_len + 2); + + /* add the dummy at the end */ + tim[0] = WLAN_EID_TIM; + tim[1] = 3; + tim[2] = 0; + tim[3] = dtim_period; + tim[4] = 0; + + if (dtim_len > 3) + skb_trim(skb, skb->len - (dtim_len - 3)); + + return 0; +} + +static int p54_beacon_update(struct p54_common *priv, + struct ieee80211_vif *vif) +{ + struct ieee80211_tx_control control = { }; + struct sk_buff *beacon; + int ret; + + beacon = ieee80211_beacon_get(priv->hw, vif); + if (!beacon) + return -ENOMEM; + ret = p54_beacon_format_ie_tim(beacon); + if (ret) + return ret; + + /* + * During operation, the firmware takes care of beaconing. + * The driver only needs to upload a new beacon template, once + * the template was changed by the stack or userspace. + * + * LMAC API 3.2.2 also specifies that the driver does not need + * to cancel the old beacon template by hand, instead the firmware + * will release the previous one through the feedback mechanism. + */ + p54_tx_80211(priv->hw, &control, beacon); + priv->tsf_high32 = 0; + priv->tsf_low32 = 0; + + return 0; +} + +static int p54_start(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + int err; + + mutex_lock(&priv->conf_mutex); + err = priv->open(dev); + if (err) + goto out; + P54_SET_QUEUE(priv->qos_params[0], 0x0002, 0x0003, 0x0007, 47); + P54_SET_QUEUE(priv->qos_params[1], 0x0002, 0x0007, 0x000f, 94); + P54_SET_QUEUE(priv->qos_params[2], 0x0003, 0x000f, 0x03ff, 0); + P54_SET_QUEUE(priv->qos_params[3], 0x0007, 0x000f, 0x03ff, 0); + err = p54_set_edcf(priv); + if (err) + goto out; + + eth_broadcast_addr(priv->bssid); + priv->mode = NL80211_IFTYPE_MONITOR; + err = p54_setup_mac(priv); + if (err) { + priv->mode = NL80211_IFTYPE_UNSPECIFIED; + goto out; + } + + ieee80211_queue_delayed_work(dev, &priv->work, 0); + + priv->softled_state = 0; + err = p54_set_leds(priv); + +out: + mutex_unlock(&priv->conf_mutex); + return err; +} + +static void p54_stop(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + int i; + + priv->mode = NL80211_IFTYPE_UNSPECIFIED; + priv->softled_state = 0; + cancel_delayed_work_sync(&priv->work); + mutex_lock(&priv->conf_mutex); + p54_set_leds(priv); + priv->stop(dev); + skb_queue_purge(&priv->tx_pending); + skb_queue_purge(&priv->tx_queue); + for (i = 0; i < P54_QUEUE_NUM; i++) { + priv->tx_stats[i].count = 0; + priv->tx_stats[i].len = 0; + } + + priv->beacon_req_id = cpu_to_le32(0); + priv->tsf_high32 = priv->tsf_low32 = 0; + mutex_unlock(&priv->conf_mutex); +} + +static int p54_add_interface(struct ieee80211_hw *dev, + struct ieee80211_vif *vif) +{ + struct p54_common *priv = dev->priv; + int err; + + vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER; + + mutex_lock(&priv->conf_mutex); + if (priv->mode != NL80211_IFTYPE_MONITOR) { + mutex_unlock(&priv->conf_mutex); + return -EOPNOTSUPP; + } + + priv->vif = vif; + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: + priv->mode = vif->type; + break; + default: + mutex_unlock(&priv->conf_mutex); + return -EOPNOTSUPP; + } + + memcpy(priv->mac_addr, vif->addr, ETH_ALEN); + err = p54_setup_mac(priv); + mutex_unlock(&priv->conf_mutex); + return err; +} + +static void p54_remove_interface(struct ieee80211_hw *dev, + struct ieee80211_vif *vif) +{ + struct p54_common *priv = dev->priv; + + mutex_lock(&priv->conf_mutex); + priv->vif = NULL; + + /* + * LMAC API 3.2.2 states that any active beacon template must be + * canceled by the driver before attempting a mode transition. + */ + if (le32_to_cpu(priv->beacon_req_id) != 0) { + p54_tx_cancel(priv, priv->beacon_req_id); + wait_for_completion_interruptible_timeout(&priv->beacon_comp, HZ); + } + priv->mode = NL80211_IFTYPE_MONITOR; + eth_zero_addr(priv->mac_addr); + eth_zero_addr(priv->bssid); + p54_setup_mac(priv); + mutex_unlock(&priv->conf_mutex); +} + +static int p54_wait_for_stats(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + int ret; + + priv->update_stats = true; + ret = p54_fetch_statistics(priv); + if (ret) + return ret; + + ret = wait_for_completion_interruptible_timeout(&priv->stat_comp, HZ); + if (ret == 0) + return -ETIMEDOUT; + + return 0; +} + +static void p54_reset_stats(struct p54_common *priv) +{ + struct ieee80211_channel *chan = priv->curchan; + + if (chan) { + struct survey_info *info = &priv->survey[chan->hw_value]; + + /* only reset channel statistics, don't touch .filled, etc. */ + info->time = 0; + info->time_busy = 0; + info->time_tx = 0; + } + + priv->update_stats = true; + priv->survey_raw.active = 0; + priv->survey_raw.cca = 0; + priv->survey_raw.tx = 0; +} + +static int p54_config(struct ieee80211_hw *dev, u32 changed) +{ + int ret = 0; + struct p54_common *priv = dev->priv; + struct ieee80211_conf *conf = &dev->conf; + + mutex_lock(&priv->conf_mutex); + if (changed & IEEE80211_CONF_CHANGE_POWER) + priv->output_power = conf->power_level << 2; + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + struct ieee80211_channel *oldchan; + WARN_ON(p54_wait_for_stats(dev)); + oldchan = priv->curchan; + priv->curchan = NULL; + ret = p54_scan(priv, P54_SCAN_EXIT, 0); + if (ret) { + priv->curchan = oldchan; + goto out; + } + /* + * TODO: Use the LM_SCAN_TRAP to determine the current + * operating channel. + */ + priv->curchan = priv->hw->conf.chandef.chan; + p54_reset_stats(priv); + WARN_ON(p54_fetch_statistics(priv)); + } + if (changed & IEEE80211_CONF_CHANGE_PS) { + WARN_ON(p54_wait_for_stats(dev)); + ret = p54_set_ps(priv); + if (ret) + goto out; + WARN_ON(p54_wait_for_stats(dev)); + } + if (changed & IEEE80211_CONF_CHANGE_IDLE) { + WARN_ON(p54_wait_for_stats(dev)); + ret = p54_setup_mac(priv); + if (ret) + goto out; + WARN_ON(p54_wait_for_stats(dev)); + } + +out: + mutex_unlock(&priv->conf_mutex); + return ret; +} + +static u64 p54_prepare_multicast(struct ieee80211_hw *dev, + struct netdev_hw_addr_list *mc_list) +{ + struct p54_common *priv = dev->priv; + struct netdev_hw_addr *ha; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(priv->mc_maclist) != + ARRAY_SIZE(((struct p54_group_address_table *)NULL)->mac_list)); + /* + * The first entry is reserved for the global broadcast MAC. + * Otherwise the firmware will drop it and ARP will no longer work. + */ + i = 1; + priv->mc_maclist_num = netdev_hw_addr_list_count(mc_list) + i; + netdev_hw_addr_list_for_each(ha, mc_list) { + memcpy(&priv->mc_maclist[i], ha->addr, ETH_ALEN); + i++; + if (i >= ARRAY_SIZE(priv->mc_maclist)) + break; + } + + return 1; /* update */ +} + +static void p54_configure_filter(struct ieee80211_hw *dev, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast) +{ + struct p54_common *priv = dev->priv; + + *total_flags &= FIF_ALLMULTI | FIF_OTHER_BSS; + + priv->filter_flags = *total_flags; + + if (changed_flags & FIF_OTHER_BSS) + p54_setup_mac(priv); + + if (changed_flags & FIF_ALLMULTI || multicast) + p54_set_groupfilter(priv); +} + +static int p54_conf_tx(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct p54_common *priv = dev->priv; + int ret; + + mutex_lock(&priv->conf_mutex); + if (queue < dev->queues) { + P54_SET_QUEUE(priv->qos_params[queue], params->aifs, + params->cw_min, params->cw_max, params->txop); + ret = p54_set_edcf(priv); + } else + ret = -EINVAL; + mutex_unlock(&priv->conf_mutex); + return ret; +} + +static void p54_work(struct work_struct *work) +{ + struct p54_common *priv = container_of(work, struct p54_common, + work.work); + + if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) + return ; + + /* + * TODO: walk through tx_queue and do the following tasks + * 1. initiate bursts. + * 2. cancel stuck frames / reset the device if necessary. + */ + + mutex_lock(&priv->conf_mutex); + WARN_ON_ONCE(p54_fetch_statistics(priv)); + mutex_unlock(&priv->conf_mutex); +} + +static int p54_get_stats(struct ieee80211_hw *dev, + struct ieee80211_low_level_stats *stats) +{ + struct p54_common *priv = dev->priv; + + memcpy(stats, &priv->stats, sizeof(*stats)); + return 0; +} + +static void p54_bss_info_changed(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, + u32 changed) +{ + struct p54_common *priv = dev->priv; + + mutex_lock(&priv->conf_mutex); + if (changed & BSS_CHANGED_BSSID) { + memcpy(priv->bssid, info->bssid, ETH_ALEN); + p54_setup_mac(priv); + } + + if (changed & BSS_CHANGED_BEACON) { + p54_scan(priv, P54_SCAN_EXIT, 0); + p54_setup_mac(priv); + p54_beacon_update(priv, vif); + p54_set_edcf(priv); + } + + if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BEACON)) { + priv->use_short_slot = info->use_short_slot; + p54_set_edcf(priv); + } + if (changed & BSS_CHANGED_BASIC_RATES) { + if (dev->conf.chandef.chan->band == IEEE80211_BAND_5GHZ) + priv->basic_rate_mask = (info->basic_rates << 4); + else + priv->basic_rate_mask = info->basic_rates; + p54_setup_mac(priv); + if (priv->fw_var >= 0x500) + p54_scan(priv, P54_SCAN_EXIT, 0); + } + if (changed & BSS_CHANGED_ASSOC) { + if (info->assoc) { + priv->aid = info->aid; + priv->wakeup_timer = info->beacon_int * + info->dtim_period * 5; + p54_setup_mac(priv); + } else { + priv->wakeup_timer = 500; + priv->aid = 0; + } + } + + mutex_unlock(&priv->conf_mutex); +} + +static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct p54_common *priv = dev->priv; + int slot, ret = 0; + u8 algo = 0; + u8 *addr = NULL; + + if (modparam_nohwcrypt) + return -EOPNOTSUPP; + + if (key->flags & IEEE80211_KEY_FLAG_RX_MGMT) { + /* + * Unfortunately most/all firmwares are trying to decrypt + * incoming management frames if a suitable key can be found. + * However, in doing so the data in these frames gets + * corrupted. So, we can't have firmware supported crypto + * offload in this case. + */ + return -EOPNOTSUPP; + } + + mutex_lock(&priv->conf_mutex); + if (cmd == SET_KEY) { + switch (key->cipher) { + case WLAN_CIPHER_SUITE_TKIP: + if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL | + BR_DESC_PRIV_CAP_TKIP))) { + ret = -EOPNOTSUPP; + goto out_unlock; + } + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + algo = P54_CRYPTO_TKIPMICHAEL; + break; + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) { + ret = -EOPNOTSUPP; + goto out_unlock; + } + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + algo = P54_CRYPTO_WEP; + break; + case WLAN_CIPHER_SUITE_CCMP: + if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) { + ret = -EOPNOTSUPP; + goto out_unlock; + } + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + algo = P54_CRYPTO_AESCCMP; + break; + default: + ret = -EOPNOTSUPP; + goto out_unlock; + } + slot = bitmap_find_free_region(priv->used_rxkeys, + priv->rx_keycache_size, 0); + + if (slot < 0) { + /* + * The device supports the chosen algorithm, but the + * firmware does not provide enough key slots to store + * all of them. + * But encryption offload for outgoing frames is always + * possible, so we just pretend that the upload was + * successful and do the decryption in software. + */ + + /* mark the key as invalid. */ + key->hw_key_idx = 0xff; + goto out_unlock; + } + + key->flags |= IEEE80211_KEY_FLAG_RESERVE_TAILROOM; + } else { + slot = key->hw_key_idx; + + if (slot == 0xff) { + /* This key was not uploaded into the rx key cache. */ + + goto out_unlock; + } + + bitmap_release_region(priv->used_rxkeys, slot, 0); + algo = 0; + } + + if (sta) + addr = sta->addr; + + ret = p54_upload_key(priv, algo, slot, key->keyidx, + key->keylen, addr, key->key); + if (ret) { + bitmap_release_region(priv->used_rxkeys, slot, 0); + ret = -EOPNOTSUPP; + goto out_unlock; + } + + key->hw_key_idx = slot; + +out_unlock: + mutex_unlock(&priv->conf_mutex); + return ret; +} + +static int p54_get_survey(struct ieee80211_hw *dev, int idx, + struct survey_info *survey) +{ + struct p54_common *priv = dev->priv; + struct ieee80211_channel *chan; + int err, tries; + bool in_use = false; + + if (idx >= priv->chan_num) + return -ENOENT; + +#define MAX_TRIES 1 + for (tries = 0; tries < MAX_TRIES; tries++) { + chan = priv->curchan; + if (chan && chan->hw_value == idx) { + mutex_lock(&priv->conf_mutex); + err = p54_wait_for_stats(dev); + mutex_unlock(&priv->conf_mutex); + if (err) + return err; + + in_use = true; + } + + memcpy(survey, &priv->survey[idx], sizeof(*survey)); + + if (in_use) { + /* test if the reported statistics are valid. */ + if (survey->time != 0) { + survey->filled |= SURVEY_INFO_IN_USE; + } else { + /* + * hw/fw has not accumulated enough sample sets. + * Wait for 100ms, this ought to be enough to + * to get at least one non-null set of channel + * usage statistics. + */ + msleep(100); + continue; + } + } + return 0; + } + return -ETIMEDOUT; +#undef MAX_TRIES +} + +static unsigned int p54_flush_count(struct p54_common *priv) +{ + unsigned int total = 0, i; + + BUILD_BUG_ON(P54_QUEUE_NUM > ARRAY_SIZE(priv->tx_stats)); + + /* + * Because the firmware has the sole control over any frames + * in the P54_QUEUE_BEACON or P54_QUEUE_SCAN queues, they + * don't really count as pending or active. + */ + for (i = P54_QUEUE_MGMT; i < P54_QUEUE_NUM; i++) + total += priv->tx_stats[i].len; + return total; +} + +static void p54_flush(struct ieee80211_hw *dev, struct ieee80211_vif *vif, + u32 queues, bool drop) +{ + struct p54_common *priv = dev->priv; + unsigned int total, i; + + /* + * Currently, it wouldn't really matter if we wait for one second + * or 15 minutes. But once someone gets around and completes the + * TODOs [ancel stuck frames / reset device] in p54_work, it will + * suddenly make sense to wait that long. + */ + i = P54_STATISTICS_UPDATE * 2 / 20; + + /* + * In this case no locking is required because as we speak the + * queues have already been stopped and no new frames can sneak + * up from behind. + */ + while ((total = p54_flush_count(priv) && i--)) { + /* waste time */ + msleep(20); + } + + WARN(total, "tx flush timeout, unresponsive firmware"); +} + +static void p54_set_coverage_class(struct ieee80211_hw *dev, + s16 coverage_class) +{ + struct p54_common *priv = dev->priv; + + mutex_lock(&priv->conf_mutex); + /* support all coverage class values as in 802.11-2007 Table 7-27 */ + priv->coverage_class = clamp_t(u8, coverage_class, 0, 31); + p54_set_edcf(priv); + mutex_unlock(&priv->conf_mutex); +} + +static const struct ieee80211_ops p54_ops = { + .tx = p54_tx_80211, + .start = p54_start, + .stop = p54_stop, + .add_interface = p54_add_interface, + .remove_interface = p54_remove_interface, + .set_tim = p54_set_tim, + .sta_notify = p54_sta_notify, + .sta_add = p54_sta_add_remove, + .sta_remove = p54_sta_add_remove, + .set_key = p54_set_key, + .config = p54_config, + .flush = p54_flush, + .bss_info_changed = p54_bss_info_changed, + .prepare_multicast = p54_prepare_multicast, + .configure_filter = p54_configure_filter, + .conf_tx = p54_conf_tx, + .get_stats = p54_get_stats, + .get_survey = p54_get_survey, + .set_coverage_class = p54_set_coverage_class, +}; + +struct ieee80211_hw *p54_init_common(size_t priv_data_len) +{ + struct ieee80211_hw *dev; + struct p54_common *priv; + + dev = ieee80211_alloc_hw(priv_data_len, &p54_ops); + if (!dev) + return NULL; + + priv = dev->priv; + priv->hw = dev; + priv->mode = NL80211_IFTYPE_UNSPECIFIED; + priv->basic_rate_mask = 0x15f; + spin_lock_init(&priv->tx_stats_lock); + skb_queue_head_init(&priv->tx_queue); + skb_queue_head_init(&priv->tx_pending); + ieee80211_hw_set(dev, REPORTS_TX_ACK_STATUS); + ieee80211_hw_set(dev, MFP_CAPABLE); + ieee80211_hw_set(dev, PS_NULLFUNC_STACK); + ieee80211_hw_set(dev, SUPPORTS_PS); + ieee80211_hw_set(dev, RX_INCLUDES_FCS); + ieee80211_hw_set(dev, SIGNAL_DBM); + + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_MESH_POINT); + + priv->beacon_req_id = cpu_to_le32(0); + priv->tx_stats[P54_QUEUE_BEACON].limit = 1; + priv->tx_stats[P54_QUEUE_FWSCAN].limit = 1; + priv->tx_stats[P54_QUEUE_MGMT].limit = 3; + priv->tx_stats[P54_QUEUE_CAB].limit = 3; + priv->tx_stats[P54_QUEUE_DATA].limit = 5; + dev->queues = 1; + priv->noise = -94; + /* + * We support at most 8 tries no matter which rate they're at, + * we cannot support max_rates * max_rate_tries as we set it + * here, but setting it correctly to 4/2 or so would limit us + * artificially if the RC algorithm wants just two rates, so + * let's say 4/7, we'll redistribute it at TX time, see the + * comments there. + */ + dev->max_rates = 4; + dev->max_rate_tries = 7; + dev->extra_tx_headroom = sizeof(struct p54_hdr) + 4 + + sizeof(struct p54_tx_data); + + /* + * For now, disable PS by default because it affects + * link stability significantly. + */ + dev->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + mutex_init(&priv->conf_mutex); + mutex_init(&priv->eeprom_mutex); + init_completion(&priv->stat_comp); + init_completion(&priv->eeprom_comp); + init_completion(&priv->beacon_comp); + INIT_DELAYED_WORK(&priv->work, p54_work); + + eth_broadcast_addr(priv->mc_maclist[0]); + priv->curchan = NULL; + p54_reset_stats(priv); + return dev; +} +EXPORT_SYMBOL_GPL(p54_init_common); + +int p54_register_common(struct ieee80211_hw *dev, struct device *pdev) +{ + struct p54_common __maybe_unused *priv = dev->priv; + int err; + + err = ieee80211_register_hw(dev); + if (err) { + dev_err(pdev, "Cannot register device (%d).\n", err); + return err; + } + priv->registered = true; + +#ifdef CONFIG_P54_LEDS + err = p54_init_leds(priv); + if (err) { + p54_unregister_common(dev); + return err; + } +#endif /* CONFIG_P54_LEDS */ + + dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy)); + return 0; +} +EXPORT_SYMBOL_GPL(p54_register_common); + +void p54_free_common(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + unsigned int i; + + for (i = 0; i < IEEE80211_NUM_BANDS; i++) + kfree(priv->band_table[i]); + + kfree(priv->iq_autocal); + kfree(priv->output_limit); + kfree(priv->curve_data); + kfree(priv->rssi_db); + kfree(priv->used_rxkeys); + kfree(priv->survey); + priv->iq_autocal = NULL; + priv->output_limit = NULL; + priv->curve_data = NULL; + priv->rssi_db = NULL; + priv->used_rxkeys = NULL; + priv->survey = NULL; + ieee80211_free_hw(dev); +} +EXPORT_SYMBOL_GPL(p54_free_common); + +void p54_unregister_common(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + +#ifdef CONFIG_P54_LEDS + p54_unregister_leds(priv); +#endif /* CONFIG_P54_LEDS */ + + if (priv->registered) { + priv->registered = false; + ieee80211_unregister_hw(dev); + } + + mutex_destroy(&priv->conf_mutex); + mutex_destroy(&priv->eeprom_mutex); +} +EXPORT_SYMBOL_GPL(p54_unregister_common); diff --git a/drivers/net/wireless/intersil/p54/p54.h b/drivers/net/wireless/intersil/p54/p54.h new file mode 100644 index 000000000..40b401ed6 --- /dev/null +++ b/drivers/net/wireless/intersil/p54/p54.h @@ -0,0 +1,281 @@ +/* + * Shared defines for all mac80211 Prism54 code + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef P54_H +#define P54_H + +#ifdef CONFIG_P54_LEDS +#include <linux/leds.h> +#endif /* CONFIG_P54_LEDS */ + +#define ISL38XX_DEV_FIRMWARE_ADDR 0x20000 + +#define BR_CODE_MIN 0x80000000 +#define BR_CODE_COMPONENT_ID 0x80000001 +#define BR_CODE_COMPONENT_VERSION 0x80000002 +#define BR_CODE_DEPENDENT_IF 0x80000003 +#define BR_CODE_EXPOSED_IF 0x80000004 +#define BR_CODE_DESCR 0x80000101 +#define BR_CODE_MAX 0x8FFFFFFF +#define BR_CODE_END_OF_BRA 0xFF0000FF +#define LEGACY_BR_CODE_END_OF_BRA 0xFFFFFFFF + +struct bootrec { + __le32 code; + __le32 len; + u32 data[10]; +} __packed; + +/* Interface role definitions */ +#define BR_INTERFACE_ROLE_SERVER 0x0000 +#define BR_INTERFACE_ROLE_CLIENT 0x8000 + +#define BR_DESC_PRIV_CAP_WEP BIT(0) +#define BR_DESC_PRIV_CAP_TKIP BIT(1) +#define BR_DESC_PRIV_CAP_MICHAEL BIT(2) +#define BR_DESC_PRIV_CAP_CCX_CP BIT(3) +#define BR_DESC_PRIV_CAP_CCX_MIC BIT(4) +#define BR_DESC_PRIV_CAP_AESCCMP BIT(5) + +struct bootrec_desc { + __le16 modes; + __le16 flags; + __le32 rx_start; + __le32 rx_end; + u8 headroom; + u8 tailroom; + u8 tx_queues; + u8 tx_depth; + u8 privacy_caps; + u8 rx_keycache_size; + u8 time_size; + u8 padding; + u8 rates[16]; + u8 padding2[4]; + __le16 rx_mtu; +} __packed; + +#define FW_FMAC 0x464d4143 +#define FW_LM86 0x4c4d3836 +#define FW_LM87 0x4c4d3837 +#define FW_LM20 0x4c4d3230 + +struct bootrec_comp_id { + __le32 fw_variant; +} __packed; + +struct bootrec_comp_ver { + char fw_version[24]; +} __packed; + +struct bootrec_end { + __le16 crc; + u8 padding[2]; + u8 md5[16]; +} __packed; + +/* provide 16 bytes for the transport back-end */ +#define P54_TX_INFO_DATA_SIZE 16 + +/* stored in ieee80211_tx_info's rate_driver_data */ +struct p54_tx_info { + u32 start_addr; + u32 end_addr; + union { + void *data[P54_TX_INFO_DATA_SIZE / sizeof(void *)]; + struct { + u32 extra_len; + }; + }; +}; + +#define P54_MAX_CTRL_FRAME_LEN 0x1000 + +#define P54_SET_QUEUE(queue, ai_fs, cw_min, cw_max, _txop) \ +do { \ + queue.aifs = cpu_to_le16(ai_fs); \ + queue.cwmin = cpu_to_le16(cw_min); \ + queue.cwmax = cpu_to_le16(cw_max); \ + queue.txop = cpu_to_le16(_txop); \ +} while (0) + +struct p54_edcf_queue_param { + __le16 aifs; + __le16 cwmin; + __le16 cwmax; + __le16 txop; +} __packed; + +struct p54_rssi_db_entry { + u16 freq; + s16 mul; + s16 add; + s16 longbow_unkn; + s16 longbow_unk2; +}; + +struct p54_cal_database { + size_t entries; + size_t entry_size; + size_t offset; + size_t len; + u8 data[0]; +}; + +#define EEPROM_READBACK_LEN 0x3fc + +enum fw_state { + FW_STATE_OFF, + FW_STATE_BOOTING, + FW_STATE_READY, + FW_STATE_RESET, + FW_STATE_RESETTING, +}; + +#ifdef CONFIG_P54_LEDS + +#define P54_LED_MAX_NAME_LEN 31 + +struct p54_led_dev { + struct ieee80211_hw *hw_dev; + struct led_classdev led_dev; + char name[P54_LED_MAX_NAME_LEN + 1]; + + unsigned int toggled; + unsigned int index; + unsigned int registered; +}; + +#endif /* CONFIG_P54_LEDS */ + +struct p54_tx_queue_stats { + unsigned int len; + unsigned int limit; + unsigned int count; +}; + +struct p54_common { + struct ieee80211_hw *hw; + struct ieee80211_vif *vif; + void (*tx)(struct ieee80211_hw *dev, struct sk_buff *skb); + int (*open)(struct ieee80211_hw *dev); + void (*stop)(struct ieee80211_hw *dev); + struct sk_buff_head tx_pending; + struct sk_buff_head tx_queue; + struct mutex conf_mutex; + bool registered; + + /* memory management (as seen by the firmware) */ + u32 rx_start; + u32 rx_end; + u16 rx_mtu; + u8 headroom; + u8 tailroom; + + /* firmware/hardware info */ + unsigned int tx_hdr_len; + unsigned int fw_var; + unsigned int fw_interface; + u8 version; + + /* (e)DCF / QOS state */ + bool use_short_slot; + spinlock_t tx_stats_lock; + struct p54_tx_queue_stats tx_stats[8]; + struct p54_edcf_queue_param qos_params[8]; + + /* Radio data */ + u16 rxhw; + u8 rx_diversity_mask; + u8 tx_diversity_mask; + unsigned int output_power; + struct p54_rssi_db_entry *cur_rssi; + struct ieee80211_channel *curchan; + struct survey_info *survey; + unsigned int chan_num; + struct completion stat_comp; + bool update_stats; + struct { + unsigned int timestamp; + unsigned int cached_cca; + unsigned int cached_tx; + unsigned int cached_rssi; + u64 active; + u64 cca; + u64 tx; + u64 rssi; + } survey_raw; + + int noise; + /* calibration, output power limit and rssi<->dBm conversation data */ + struct pda_iq_autocal_entry *iq_autocal; + unsigned int iq_autocal_len; + struct p54_cal_database *curve_data; + struct p54_cal_database *output_limit; + struct p54_cal_database *rssi_db; + struct ieee80211_supported_band *band_table[IEEE80211_NUM_BANDS]; + + /* BBP/MAC state */ + u8 mac_addr[ETH_ALEN]; + u8 bssid[ETH_ALEN]; + u8 mc_maclist[4][ETH_ALEN]; + u16 wakeup_timer; + unsigned int filter_flags; + int mc_maclist_num; + int mode; + u32 tsf_low32, tsf_high32; + u32 basic_rate_mask; + u16 aid; + u8 coverage_class; + bool phy_idle; + bool phy_ps; + bool powersave_override; + __le32 beacon_req_id; + struct completion beacon_comp; + + /* cryptographic engine information */ + u8 privacy_caps; + u8 rx_keycache_size; + unsigned long *used_rxkeys; + + /* LED management */ +#ifdef CONFIG_P54_LEDS + struct p54_led_dev leds[4]; + struct delayed_work led_work; +#endif /* CONFIG_P54_LEDS */ + u16 softled_state; /* bit field of glowing LEDs */ + + /* statistics */ + struct ieee80211_low_level_stats stats; + struct delayed_work work; + + /* eeprom handling */ + void *eeprom; + struct completion eeprom_comp; + struct mutex eeprom_mutex; +}; + +/* interfaces for the drivers */ +int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb); +void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb); +int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw); +int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len); +int p54_read_eeprom(struct ieee80211_hw *dev); + +struct ieee80211_hw *p54_init_common(size_t priv_data_len); +int p54_register_common(struct ieee80211_hw *dev, struct device *pdev); +void p54_free_common(struct ieee80211_hw *dev); + +void p54_unregister_common(struct ieee80211_hw *dev); + +#endif /* P54_H */ diff --git a/drivers/net/wireless/intersil/p54/p54pci.c b/drivers/net/wireless/intersil/p54/p54pci.c new file mode 100644 index 000000000..977ef9fb9 --- /dev/null +++ b/drivers/net/wireless/intersil/p54/p54pci.c @@ -0,0 +1,703 @@ + +/* + * Linux device driver for PCI based Prism54 + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2008, Christian Lamparter <chunkeey@web.de> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jean-baptiste.note@m4x.org>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/completion.h> +#include <linux/module.h> +#include <net/mac80211.h> + +#include "p54.h" +#include "lmac.h" +#include "p54pci.h" + +MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); +MODULE_DESCRIPTION("Prism54 PCI wireless driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("prism54pci"); +/*(DEBLOBBED)*/ + +static const struct pci_device_id p54p_table[] = { + /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ + { PCI_DEVICE(0x1260, 0x3890) }, + /* 3COM 3CRWE154G72 Wireless LAN adapter */ + { PCI_DEVICE(0x10b7, 0x6001) }, + /* Intersil PRISM Indigo Wireless LAN adapter */ + { PCI_DEVICE(0x1260, 0x3877) }, + /* Intersil PRISM Javelin/Xbow Wireless LAN adapter */ + { PCI_DEVICE(0x1260, 0x3886) }, + /* Intersil PRISM Xbow Wireless LAN adapter (Symbol AP-300) */ + { PCI_DEVICE(0x1260, 0xffff) }, + { }, +}; + +MODULE_DEVICE_TABLE(pci, p54p_table); + +static int p54p_upload_firmware(struct ieee80211_hw *dev) +{ + struct p54p_priv *priv = dev->priv; + __le32 reg; + int err; + __le32 *data; + u32 remains, left, device_addr; + + P54P_WRITE(int_enable, cpu_to_le32(0)); + P54P_READ(int_enable); + udelay(10); + + reg = P54P_READ(ctrl_stat); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT); + P54P_WRITE(ctrl_stat, reg); + P54P_READ(ctrl_stat); + udelay(10); + + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); + P54P_WRITE(ctrl_stat, reg); + wmb(); + udelay(10); + + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + P54P_WRITE(ctrl_stat, reg); + wmb(); + + /* wait for the firmware to reset properly */ + mdelay(10); + + err = p54_parse_firmware(dev, priv->firmware); + if (err) + return err; + + if (priv->common.fw_interface != FW_LM86) { + dev_err(&priv->pdev->dev, "wrong firmware, " + "please get a LM86(PCI) firmware a try again.\n"); + return -EINVAL; + } + + data = (__le32 *) priv->firmware->data; + remains = priv->firmware->size; + device_addr = ISL38XX_DEV_FIRMWARE_ADDR; + while (remains) { + u32 i = 0; + left = min((u32)0x1000, remains); + P54P_WRITE(direct_mem_base, cpu_to_le32(device_addr)); + P54P_READ(int_enable); + + device_addr += 0x1000; + while (i < left) { + P54P_WRITE(direct_mem_win[i], *data++); + i += sizeof(u32); + } + + remains -= left; + P54P_READ(int_enable); + } + + reg = P54P_READ(ctrl_stat); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT); + P54P_WRITE(ctrl_stat, reg); + P54P_READ(ctrl_stat); + udelay(10); + + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); + P54P_WRITE(ctrl_stat, reg); + wmb(); + udelay(10); + + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + P54P_WRITE(ctrl_stat, reg); + wmb(); + udelay(10); + + /* wait for the firmware to boot properly */ + mdelay(100); + + return 0; +} + +static void p54p_refill_rx_ring(struct ieee80211_hw *dev, + int ring_index, struct p54p_desc *ring, u32 ring_limit, + struct sk_buff **rx_buf, u32 index) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + u32 limit, idx, i; + + idx = le32_to_cpu(ring_control->host_idx[ring_index]); + limit = idx; + limit -= index; + limit = ring_limit - limit; + + i = idx % ring_limit; + while (limit-- > 1) { + struct p54p_desc *desc = &ring[i]; + + if (!desc->host_addr) { + struct sk_buff *skb; + dma_addr_t mapping; + skb = dev_alloc_skb(priv->common.rx_mtu + 32); + if (!skb) + break; + + mapping = pci_map_single(priv->pdev, + skb_tail_pointer(skb), + priv->common.rx_mtu + 32, + PCI_DMA_FROMDEVICE); + + if (pci_dma_mapping_error(priv->pdev, mapping)) { + dev_kfree_skb_any(skb); + dev_err(&priv->pdev->dev, + "RX DMA Mapping error\n"); + break; + } + + desc->host_addr = cpu_to_le32(mapping); + desc->device_addr = 0; // FIXME: necessary? + desc->len = cpu_to_le16(priv->common.rx_mtu + 32); + desc->flags = 0; + rx_buf[i] = skb; + } + + i++; + idx++; + i %= ring_limit; + } + + wmb(); + ring_control->host_idx[ring_index] = cpu_to_le32(idx); +} + +static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index, + int ring_index, struct p54p_desc *ring, u32 ring_limit, + struct sk_buff **rx_buf) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + struct p54p_desc *desc; + u32 idx, i; + + i = (*index) % ring_limit; + (*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]); + idx %= ring_limit; + while (i != idx) { + u16 len; + struct sk_buff *skb; + dma_addr_t dma_addr; + desc = &ring[i]; + len = le16_to_cpu(desc->len); + skb = rx_buf[i]; + + if (!skb) { + i++; + i %= ring_limit; + continue; + } + + if (unlikely(len > priv->common.rx_mtu)) { + if (net_ratelimit()) + dev_err(&priv->pdev->dev, "rx'd frame size " + "exceeds length threshold.\n"); + + len = priv->common.rx_mtu; + } + dma_addr = le32_to_cpu(desc->host_addr); + pci_dma_sync_single_for_cpu(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); + skb_put(skb, len); + + if (p54_rx(dev, skb)) { + pci_unmap_single(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); + rx_buf[i] = NULL; + desc->host_addr = cpu_to_le32(0); + } else { + skb_trim(skb, 0); + pci_dma_sync_single_for_device(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); + desc->len = cpu_to_le16(priv->common.rx_mtu + 32); + } + + i++; + i %= ring_limit; + } + + p54p_refill_rx_ring(dev, ring_index, ring, ring_limit, rx_buf, *index); +} + +static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index, + int ring_index, struct p54p_desc *ring, u32 ring_limit, + struct sk_buff **tx_buf) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + struct p54p_desc *desc; + struct sk_buff *skb; + u32 idx, i; + + i = (*index) % ring_limit; + (*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]); + idx %= ring_limit; + + while (i != idx) { + desc = &ring[i]; + + skb = tx_buf[i]; + tx_buf[i] = NULL; + + pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), + le16_to_cpu(desc->len), PCI_DMA_TODEVICE); + + desc->host_addr = 0; + desc->device_addr = 0; + desc->len = 0; + desc->flags = 0; + + if (skb && FREE_AFTER_TX(skb)) + p54_free_skb(dev, skb); + + i++; + i %= ring_limit; + } +} + +static void p54p_tasklet(unsigned long dev_id) +{ + struct ieee80211_hw *dev = (struct ieee80211_hw *)dev_id; + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + + p54p_check_tx_ring(dev, &priv->tx_idx_mgmt, 3, ring_control->tx_mgmt, + ARRAY_SIZE(ring_control->tx_mgmt), + priv->tx_buf_mgmt); + + p54p_check_tx_ring(dev, &priv->tx_idx_data, 1, ring_control->tx_data, + ARRAY_SIZE(ring_control->tx_data), + priv->tx_buf_data); + + p54p_check_rx_ring(dev, &priv->rx_idx_mgmt, 2, ring_control->rx_mgmt, + ARRAY_SIZE(ring_control->rx_mgmt), priv->rx_buf_mgmt); + + p54p_check_rx_ring(dev, &priv->rx_idx_data, 0, ring_control->rx_data, + ARRAY_SIZE(ring_control->rx_data), priv->rx_buf_data); + + wmb(); + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); +} + +static irqreturn_t p54p_interrupt(int irq, void *dev_id) +{ + struct ieee80211_hw *dev = dev_id; + struct p54p_priv *priv = dev->priv; + __le32 reg; + + reg = P54P_READ(int_ident); + if (unlikely(reg == cpu_to_le32(0xFFFFFFFF))) { + goto out; + } + P54P_WRITE(int_ack, reg); + + reg &= P54P_READ(int_enable); + + if (reg & cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)) + tasklet_schedule(&priv->tasklet); + else if (reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT)) + complete(&priv->boot_comp); + +out: + return reg ? IRQ_HANDLED : IRQ_NONE; +} + +static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + unsigned long flags; + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + struct p54p_desc *desc; + dma_addr_t mapping; + u32 idx, i; + + spin_lock_irqsave(&priv->lock, flags); + idx = le32_to_cpu(ring_control->host_idx[1]); + i = idx % ARRAY_SIZE(ring_control->tx_data); + + mapping = pci_map_single(priv->pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(priv->pdev, mapping)) { + spin_unlock_irqrestore(&priv->lock, flags); + p54_free_skb(dev, skb); + dev_err(&priv->pdev->dev, "TX DMA mapping error\n"); + return ; + } + priv->tx_buf_data[i] = skb; + + desc = &ring_control->tx_data[i]; + desc->host_addr = cpu_to_le32(mapping); + desc->device_addr = ((struct p54_hdr *)skb->data)->req_id; + desc->len = cpu_to_le16(skb->len); + desc->flags = 0; + + wmb(); + ring_control->host_idx[1] = cpu_to_le32(idx + 1); + spin_unlock_irqrestore(&priv->lock, flags); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); + P54P_READ(dev_int); +} + +static void p54p_stop(struct ieee80211_hw *dev) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + unsigned int i; + struct p54p_desc *desc; + + P54P_WRITE(int_enable, cpu_to_le32(0)); + P54P_READ(int_enable); + udelay(10); + + free_irq(priv->pdev->irq, dev); + + tasklet_kill(&priv->tasklet); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); + + for (i = 0; i < ARRAY_SIZE(priv->rx_buf_data); i++) { + desc = &ring_control->rx_data[i]; + if (desc->host_addr) + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + priv->common.rx_mtu + 32, + PCI_DMA_FROMDEVICE); + kfree_skb(priv->rx_buf_data[i]); + priv->rx_buf_data[i] = NULL; + } + + for (i = 0; i < ARRAY_SIZE(priv->rx_buf_mgmt); i++) { + desc = &ring_control->rx_mgmt[i]; + if (desc->host_addr) + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + priv->common.rx_mtu + 32, + PCI_DMA_FROMDEVICE); + kfree_skb(priv->rx_buf_mgmt[i]); + priv->rx_buf_mgmt[i] = NULL; + } + + for (i = 0; i < ARRAY_SIZE(priv->tx_buf_data); i++) { + desc = &ring_control->tx_data[i]; + if (desc->host_addr) + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + le16_to_cpu(desc->len), + PCI_DMA_TODEVICE); + + p54_free_skb(dev, priv->tx_buf_data[i]); + priv->tx_buf_data[i] = NULL; + } + + for (i = 0; i < ARRAY_SIZE(priv->tx_buf_mgmt); i++) { + desc = &ring_control->tx_mgmt[i]; + if (desc->host_addr) + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + le16_to_cpu(desc->len), + PCI_DMA_TODEVICE); + + p54_free_skb(dev, priv->tx_buf_mgmt[i]); + priv->tx_buf_mgmt[i] = NULL; + } + + memset(ring_control, 0, sizeof(*ring_control)); +} + +static int p54p_open(struct ieee80211_hw *dev) +{ + struct p54p_priv *priv = dev->priv; + int err; + long timeout; + + init_completion(&priv->boot_comp); + err = request_irq(priv->pdev->irq, p54p_interrupt, + IRQF_SHARED, "p54pci", dev); + if (err) { + dev_err(&priv->pdev->dev, "failed to register IRQ handler\n"); + return err; + } + + memset(priv->ring_control, 0, sizeof(*priv->ring_control)); + err = p54p_upload_firmware(dev); + if (err) { + free_irq(priv->pdev->irq, dev); + return err; + } + priv->rx_idx_data = priv->tx_idx_data = 0; + priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0; + + p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data, + ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data, 0); + + p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt, + ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt, 0); + + P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma)); + P54P_READ(ring_control_base); + wmb(); + udelay(10); + + P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT)); + P54P_READ(int_enable); + wmb(); + udelay(10); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); + P54P_READ(dev_int); + + timeout = wait_for_completion_interruptible_timeout( + &priv->boot_comp, HZ); + if (timeout <= 0) { + wiphy_err(dev->wiphy, "Cannot boot firmware!\n"); + p54p_stop(dev); + return timeout ? -ERESTARTSYS : -ETIMEDOUT; + } + + P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)); + P54P_READ(int_enable); + wmb(); + udelay(10); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); + P54P_READ(dev_int); + wmb(); + udelay(10); + + return 0; +} + +static void p54p_firmware_step2(const struct firmware *fw, + void *context) +{ + struct p54p_priv *priv = context; + struct ieee80211_hw *dev = priv->common.hw; + struct pci_dev *pdev = priv->pdev; + int err; + + if (!fw) { + dev_err(&pdev->dev, "Cannot find firmware (/*(DEBLOBBED)*/)\n"); + err = -ENOENT; + goto out; + } + + priv->firmware = fw; + + err = p54p_open(dev); + if (err) + goto out; + err = p54_read_eeprom(dev); + p54p_stop(dev); + if (err) + goto out; + + err = p54_register_common(dev, &pdev->dev); + if (err) + goto out; + +out: + + complete(&priv->fw_loaded); + + if (err) { + struct device *parent = pdev->dev.parent; + + if (parent) + device_lock(parent); + + /* + * This will indirectly result in a call to p54p_remove. + * Hence, we don't need to bother with freeing any + * allocated ressources at all. + */ + device_release_driver(&pdev->dev); + + if (parent) + device_unlock(parent); + } + + pci_dev_put(pdev); +} + +static int p54p_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct p54p_priv *priv; + struct ieee80211_hw *dev; + unsigned long mem_addr, mem_len; + int err; + + pci_dev_get(pdev); + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "Cannot enable new PCI device\n"); + return err; + } + + mem_addr = pci_resource_start(pdev, 0); + mem_len = pci_resource_len(pdev, 0); + if (mem_len < sizeof(struct p54p_csr)) { + dev_err(&pdev->dev, "Too short PCI resources\n"); + err = -ENODEV; + goto err_disable_dev; + } + + err = pci_request_regions(pdev, "p54pci"); + if (err) { + dev_err(&pdev->dev, "Cannot obtain PCI resources\n"); + goto err_disable_dev; + } + + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + dev_err(&pdev->dev, "No suitable DMA available\n"); + goto err_free_reg; + } + + pci_set_master(pdev); + pci_try_set_mwi(pdev); + + pci_write_config_byte(pdev, 0x40, 0); + pci_write_config_byte(pdev, 0x41, 0); + + dev = p54_init_common(sizeof(*priv)); + if (!dev) { + dev_err(&pdev->dev, "ieee80211 alloc failed\n"); + err = -ENOMEM; + goto err_free_reg; + } + + priv = dev->priv; + priv->pdev = pdev; + + init_completion(&priv->fw_loaded); + SET_IEEE80211_DEV(dev, &pdev->dev); + pci_set_drvdata(pdev, dev); + + priv->map = ioremap(mem_addr, mem_len); + if (!priv->map) { + dev_err(&pdev->dev, "Cannot map device memory\n"); + err = -ENOMEM; + goto err_free_dev; + } + + priv->ring_control = pci_alloc_consistent(pdev, sizeof(*priv->ring_control), + &priv->ring_control_dma); + if (!priv->ring_control) { + dev_err(&pdev->dev, "Cannot allocate rings\n"); + err = -ENOMEM; + goto err_iounmap; + } + priv->common.open = p54p_open; + priv->common.stop = p54p_stop; + priv->common.tx = p54p_tx; + + spin_lock_init(&priv->lock); + tasklet_init(&priv->tasklet, p54p_tasklet, (unsigned long)dev); + + err = reject_firmware_nowait(THIS_MODULE, 1, "/*(DEBLOBBED)*/", + &priv->pdev->dev, GFP_KERNEL, + priv, p54p_firmware_step2); + if (!err) + return 0; + + pci_free_consistent(pdev, sizeof(*priv->ring_control), + priv->ring_control, priv->ring_control_dma); + + err_iounmap: + iounmap(priv->map); + + err_free_dev: + p54_free_common(dev); + + err_free_reg: + pci_release_regions(pdev); + err_disable_dev: + pci_disable_device(pdev); + pci_dev_put(pdev); + return err; +} + +static void p54p_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *dev = pci_get_drvdata(pdev); + struct p54p_priv *priv; + + if (!dev) + return; + + priv = dev->priv; + wait_for_completion(&priv->fw_loaded); + p54_unregister_common(dev); + release_firmware(priv->firmware); + pci_free_consistent(pdev, sizeof(*priv->ring_control), + priv->ring_control, priv->ring_control_dma); + iounmap(priv->map); + pci_release_regions(pdev); + pci_disable_device(pdev); + p54_free_common(dev); +} + +#ifdef CONFIG_PM_SLEEP +static int p54p_suspend(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + + pci_save_state(pdev); + pci_set_power_state(pdev, PCI_D3hot); + pci_disable_device(pdev); + return 0; +} + +static int p54p_resume(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + int err; + + err = pci_reenable_device(pdev); + if (err) + return err; + return pci_set_power_state(pdev, PCI_D0); +} + +static SIMPLE_DEV_PM_OPS(p54pci_pm_ops, p54p_suspend, p54p_resume); + +#define P54P_PM_OPS (&p54pci_pm_ops) +#else +#define P54P_PM_OPS (NULL) +#endif /* CONFIG_PM_SLEEP */ + +static struct pci_driver p54p_driver = { + .name = "p54pci", + .id_table = p54p_table, + .probe = p54p_probe, + .remove = p54p_remove, + .driver.pm = P54P_PM_OPS, +}; + +module_pci_driver(p54p_driver); diff --git a/drivers/net/wireless/intersil/p54/p54pci.h b/drivers/net/wireless/intersil/p54/p54pci.h new file mode 100644 index 000000000..68405c142 --- /dev/null +++ b/drivers/net/wireless/intersil/p54/p54pci.h @@ -0,0 +1,112 @@ +#ifndef P54PCI_H +#define P54PCI_H +#include <linux/interrupt.h> + +/* + * Defines for PCI based mac80211 Prism54 driver + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Device Interrupt register bits */ +#define ISL38XX_DEV_INT_RESET 0x0001 +#define ISL38XX_DEV_INT_UPDATE 0x0002 +#define ISL38XX_DEV_INT_WAKEUP 0x0008 +#define ISL38XX_DEV_INT_SLEEP 0x0010 +#define ISL38XX_DEV_INT_ABORT 0x0020 +/* these two only used in USB */ +#define ISL38XX_DEV_INT_DATA 0x0040 +#define ISL38XX_DEV_INT_MGMT 0x0080 + +#define ISL38XX_DEV_INT_PCIUART_CTS 0x4000 +#define ISL38XX_DEV_INT_PCIUART_DR 0x8000 + +/* Interrupt Identification/Acknowledge/Enable register bits */ +#define ISL38XX_INT_IDENT_UPDATE 0x0002 +#define ISL38XX_INT_IDENT_INIT 0x0004 +#define ISL38XX_INT_IDENT_WAKEUP 0x0008 +#define ISL38XX_INT_IDENT_SLEEP 0x0010 +#define ISL38XX_INT_IDENT_PCIUART_CTS 0x4000 +#define ISL38XX_INT_IDENT_PCIUART_DR 0x8000 + +/* Control/Status register bits */ +#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200 +#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000 +#define ISL38XX_CTRL_STAT_RESET 0x10000000 +#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000 +#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000 +#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000 + +struct p54p_csr { + __le32 dev_int; + u8 unused_1[12]; + __le32 int_ident; + __le32 int_ack; + __le32 int_enable; + u8 unused_2[4]; + union { + __le32 ring_control_base; + __le32 gen_purp_com[2]; + }; + u8 unused_3[8]; + __le32 direct_mem_base; + u8 unused_4[44]; + __le32 dma_addr; + __le32 dma_len; + __le32 dma_ctrl; + u8 unused_5[12]; + __le32 ctrl_stat; + u8 unused_6[1924]; + u8 cardbus_cis[0x800]; + u8 direct_mem_win[0x1000]; +} __packed; + +/* usb backend only needs the register defines above */ +#ifndef P54USB_H +struct p54p_desc { + __le32 host_addr; + __le32 device_addr; + __le16 len; + __le16 flags; +} __packed; + +struct p54p_ring_control { + __le32 host_idx[4]; + __le32 device_idx[4]; + struct p54p_desc rx_data[8]; + struct p54p_desc tx_data[32]; + struct p54p_desc rx_mgmt[4]; + struct p54p_desc tx_mgmt[4]; +} __packed; + +#define P54P_READ(r) (__force __le32)__raw_readl(&priv->map->r) +#define P54P_WRITE(r, val) __raw_writel((__force u32)(__le32)(val), &priv->map->r) + +struct p54p_priv { + struct p54_common common; + struct pci_dev *pdev; + struct p54p_csr __iomem *map; + struct tasklet_struct tasklet; + const struct firmware *firmware; + spinlock_t lock; + struct p54p_ring_control *ring_control; + dma_addr_t ring_control_dma; + u32 rx_idx_data, tx_idx_data; + u32 rx_idx_mgmt, tx_idx_mgmt; + struct sk_buff *rx_buf_data[8]; + struct sk_buff *rx_buf_mgmt[4]; + struct sk_buff *tx_buf_data[32]; + struct sk_buff *tx_buf_mgmt[4]; + struct completion boot_comp; + struct completion fw_loaded; +}; + +#endif /* P54USB_H */ +#endif /* P54PCI_H */ diff --git a/drivers/net/wireless/intersil/p54/p54spi.c b/drivers/net/wireless/intersil/p54/p54spi.c new file mode 100644 index 000000000..a0b78eadc --- /dev/null +++ b/drivers/net/wireless/intersil/p54/p54spi.c @@ -0,0 +1,720 @@ +/* + * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de> + * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> + * + * This driver is a port from stlc45xx: + * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/firmware.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/spi/spi.h> +#include <linux/etherdevice.h> +#include <linux/gpio.h> +#include <linux/slab.h> + +#include "p54spi.h" +#include "p54.h" + +#include "lmac.h" + +#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM +#include "p54spi_eeprom.h" +#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ + +/*(DEBLOBBED)*/ + +/* gpios should be handled in board files and provided via platform data, + * but because it's currently impossible for p54spi to have a header file + * in include/linux, let's use module paramaters for now + */ + +static int p54spi_gpio_power = 97; +module_param(p54spi_gpio_power, int, 0444); +MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line"); + +static int p54spi_gpio_irq = 87; +module_param(p54spi_gpio_irq, int, 0444); +MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line"); + +static void p54spi_spi_read(struct p54s_priv *priv, u8 address, + void *buf, size_t len) +{ + struct spi_transfer t[2]; + struct spi_message m; + __le16 addr; + + /* We first push the address */ + addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15); + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &addr; + t[0].len = sizeof(addr); + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = buf; + t[1].len = len; + spi_message_add_tail(&t[1], &m); + + spi_sync(priv->spi, &m); +} + + +static void p54spi_spi_write(struct p54s_priv *priv, u8 address, + const void *buf, size_t len) +{ + struct spi_transfer t[3]; + struct spi_message m; + __le16 addr; + + /* We first push the address */ + addr = cpu_to_le16(address << 8); + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &addr; + t[0].len = sizeof(addr); + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + t[1].len = len & ~1; + spi_message_add_tail(&t[1], &m); + + if (len % 2) { + __le16 last_word; + last_word = cpu_to_le16(((u8 *)buf)[len - 1]); + + t[2].tx_buf = &last_word; + t[2].len = sizeof(last_word); + spi_message_add_tail(&t[2], &m); + } + + spi_sync(priv->spi, &m); +} + +static u32 p54spi_read32(struct p54s_priv *priv, u8 addr) +{ + __le32 val; + + p54spi_spi_read(priv, addr, &val, sizeof(val)); + + return le32_to_cpu(val); +} + +static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val) +{ + p54spi_spi_write(priv, addr, &val, sizeof(val)); +} + +static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val) +{ + p54spi_spi_write(priv, addr, &val, sizeof(val)); +} + +static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits) +{ + int i; + + for (i = 0; i < 2000; i++) { + u32 buffer = p54spi_read32(priv, reg); + if ((buffer & bits) == bits) + return 1; + } + return 0; +} + +static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base, + const void *buf, size_t len) +{ + if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) { + dev_err(&priv->spi->dev, "spi_write_dma not allowed " + "to DMA write.\n"); + return -EAGAIN; + } + + p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL, + cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE)); + + p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len)); + p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base); + p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len); + return 0; +} + +static int p54spi_request_firmware(struct ieee80211_hw *dev) +{ + struct p54s_priv *priv = dev->priv; + int ret; + + /* FIXME: should driver use it's own struct device? */ + ret = reject_firmware(&priv->firmware, "/*(DEBLOBBED)*/", &priv->spi->dev); + + if (ret < 0) { + dev_err(&priv->spi->dev, "reject_firmware() failed: %d", ret); + return ret; + } + + ret = p54_parse_firmware(dev, priv->firmware); + if (ret) { + release_firmware(priv->firmware); + return ret; + } + + return 0; +} + +static int p54spi_request_eeprom(struct ieee80211_hw *dev) +{ + struct p54s_priv *priv = dev->priv; + const struct firmware *eeprom; + int ret; + + /* allow users to customize their eeprom. + */ + + ret = reject_firmware_direct(&eeprom, "/*(DEBLOBBED)*/", &priv->spi->dev); + if (ret < 0) { +#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM + dev_info(&priv->spi->dev, "loading default eeprom...\n"); + ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom, + sizeof(p54spi_eeprom)); +#else + dev_err(&priv->spi->dev, "Failed to request user eeprom\n"); +#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ + } else { + dev_info(&priv->spi->dev, "loading user eeprom...\n"); + ret = p54_parse_eeprom(dev, (void *) eeprom->data, + (int)eeprom->size); + release_firmware(eeprom); + } + return ret; +} + +static int p54spi_upload_firmware(struct ieee80211_hw *dev) +{ + struct p54s_priv *priv = dev->priv; + unsigned long fw_len, _fw_len; + unsigned int offset = 0; + int err = 0; + u8 *fw; + + fw_len = priv->firmware->size; + fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL); + if (!fw) + return -ENOMEM; + + /* stop the device */ + p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( + SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | + SPI_CTRL_STAT_START_HALTED)); + + msleep(TARGET_BOOT_SLEEP); + + p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( + SPI_CTRL_STAT_HOST_OVERRIDE | + SPI_CTRL_STAT_START_HALTED)); + + msleep(TARGET_BOOT_SLEEP); + + while (fw_len > 0) { + _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE); + + err = p54spi_spi_write_dma(priv, cpu_to_le32( + ISL38XX_DEV_FIRMWARE_ADDR + offset), + (fw + offset), _fw_len); + if (err < 0) + goto out; + + fw_len -= _fw_len; + offset += _fw_len; + } + + BUG_ON(fw_len != 0); + + /* enable host interrupts */ + p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, + cpu_to_le32(SPI_HOST_INTS_DEFAULT)); + + /* boot the device */ + p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( + SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | + SPI_CTRL_STAT_RAM_BOOT)); + + msleep(TARGET_BOOT_SLEEP); + + p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( + SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT)); + msleep(TARGET_BOOT_SLEEP); + +out: + kfree(fw); + return err; +} + +static void p54spi_power_off(struct p54s_priv *priv) +{ + disable_irq(gpio_to_irq(p54spi_gpio_irq)); + gpio_set_value(p54spi_gpio_power, 0); +} + +static void p54spi_power_on(struct p54s_priv *priv) +{ + gpio_set_value(p54spi_gpio_power, 1); + enable_irq(gpio_to_irq(p54spi_gpio_irq)); + + /* need to wait a while before device can be accessed, the length + * is just a guess + */ + msleep(10); +} + +static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val) +{ + p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val)); +} + +static int p54spi_wakeup(struct p54s_priv *priv) +{ + /* wake the chip */ + p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, + cpu_to_le32(SPI_TARGET_INT_WAKEUP)); + + /* And wait for the READY interrupt */ + if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, + SPI_HOST_INT_READY)) { + dev_err(&priv->spi->dev, "INT_READY timeout\n"); + return -EBUSY; + } + + p54spi_int_ack(priv, SPI_HOST_INT_READY); + return 0; +} + +static inline void p54spi_sleep(struct p54s_priv *priv) +{ + p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, + cpu_to_le32(SPI_TARGET_INT_SLEEP)); +} + +static void p54spi_int_ready(struct p54s_priv *priv) +{ + p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32( + SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)); + + switch (priv->fw_state) { + case FW_STATE_BOOTING: + priv->fw_state = FW_STATE_READY; + complete(&priv->fw_comp); + break; + case FW_STATE_RESETTING: + priv->fw_state = FW_STATE_READY; + /* TODO: reinitialize state */ + break; + default: + break; + } +} + +static int p54spi_rx(struct p54s_priv *priv) +{ + struct sk_buff *skb; + u16 len; + u16 rx_head[2]; +#define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16)) + + if (p54spi_wakeup(priv) < 0) + return -EBUSY; + + /* Read data size and first data word in one SPI transaction + * This is workaround for firmware/DMA bug, + * when first data word gets lost under high load. + */ + p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head)); + len = rx_head[0]; + + if (len == 0) { + p54spi_sleep(priv); + dev_err(&priv->spi->dev, "rx request of zero bytes\n"); + return 0; + } + + /* Firmware may insert up to 4 padding bytes after the lmac header, + * but it does not amend the size of SPI data transfer. + * Such packets has correct data size in header, thus referencing + * past the end of allocated skb. Reserve extra 4 bytes for this case + */ + skb = dev_alloc_skb(len + 4); + if (!skb) { + p54spi_sleep(priv); + dev_err(&priv->spi->dev, "could not alloc skb"); + return -ENOMEM; + } + + if (len <= READAHEAD_SZ) { + memcpy(skb_put(skb, len), rx_head + 1, len); + } else { + memcpy(skb_put(skb, READAHEAD_SZ), rx_head + 1, READAHEAD_SZ); + p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, + skb_put(skb, len - READAHEAD_SZ), + len - READAHEAD_SZ); + } + p54spi_sleep(priv); + /* Put additional bytes to compensate for the possible + * alignment-caused truncation + */ + skb_put(skb, 4); + + if (p54_rx(priv->hw, skb) == 0) + dev_kfree_skb(skb); + + return 0; +} + + +static irqreturn_t p54spi_interrupt(int irq, void *config) +{ + struct spi_device *spi = config; + struct p54s_priv *priv = spi_get_drvdata(spi); + + ieee80211_queue_work(priv->hw, &priv->work); + + return IRQ_HANDLED; +} + +static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb) +{ + struct p54_hdr *hdr = (struct p54_hdr *) skb->data; + int ret = 0; + + if (p54spi_wakeup(priv) < 0) + return -EBUSY; + + ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len); + if (ret < 0) + goto out; + + if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, + SPI_HOST_INT_WR_READY)) { + dev_err(&priv->spi->dev, "WR_READY timeout\n"); + ret = -EAGAIN; + goto out; + } + + p54spi_int_ack(priv, SPI_HOST_INT_WR_READY); + + if (FREE_AFTER_TX(skb)) + p54_free_skb(priv->hw, skb); +out: + p54spi_sleep(priv); + return ret; +} + +static int p54spi_wq_tx(struct p54s_priv *priv) +{ + struct p54s_tx_info *entry; + struct sk_buff *skb; + struct ieee80211_tx_info *info; + struct p54_tx_info *minfo; + struct p54s_tx_info *dinfo; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&priv->tx_lock, flags); + + while (!list_empty(&priv->tx_pending)) { + entry = list_entry(priv->tx_pending.next, + struct p54s_tx_info, tx_list); + + list_del_init(&entry->tx_list); + + spin_unlock_irqrestore(&priv->tx_lock, flags); + + dinfo = container_of((void *) entry, struct p54s_tx_info, + tx_list); + minfo = container_of((void *) dinfo, struct p54_tx_info, + data); + info = container_of((void *) minfo, struct ieee80211_tx_info, + rate_driver_data); + skb = container_of((void *) info, struct sk_buff, cb); + + ret = p54spi_tx_frame(priv, skb); + + if (ret < 0) { + p54_free_skb(priv->hw, skb); + return ret; + } + + spin_lock_irqsave(&priv->tx_lock, flags); + } + spin_unlock_irqrestore(&priv->tx_lock, flags); + return ret; +} + +static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + struct p54s_priv *priv = dev->priv; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data; + struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data; + unsigned long flags; + + BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data))); + + spin_lock_irqsave(&priv->tx_lock, flags); + list_add_tail(&di->tx_list, &priv->tx_pending); + spin_unlock_irqrestore(&priv->tx_lock, flags); + + ieee80211_queue_work(priv->hw, &priv->work); +} + +static void p54spi_work(struct work_struct *work) +{ + struct p54s_priv *priv = container_of(work, struct p54s_priv, work); + u32 ints; + int ret; + + mutex_lock(&priv->mutex); + + if (priv->fw_state == FW_STATE_OFF) + goto out; + + ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); + + if (ints & SPI_HOST_INT_READY) { + p54spi_int_ready(priv); + p54spi_int_ack(priv, SPI_HOST_INT_READY); + } + + if (priv->fw_state != FW_STATE_READY) + goto out; + + if (ints & SPI_HOST_INT_UPDATE) { + p54spi_int_ack(priv, SPI_HOST_INT_UPDATE); + ret = p54spi_rx(priv); + if (ret < 0) + goto out; + } + if (ints & SPI_HOST_INT_SW_UPDATE) { + p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE); + ret = p54spi_rx(priv); + if (ret < 0) + goto out; + } + + ret = p54spi_wq_tx(priv); +out: + mutex_unlock(&priv->mutex); +} + +static int p54spi_op_start(struct ieee80211_hw *dev) +{ + struct p54s_priv *priv = dev->priv; + unsigned long timeout; + int ret = 0; + + if (mutex_lock_interruptible(&priv->mutex)) { + ret = -EINTR; + goto out; + } + + priv->fw_state = FW_STATE_BOOTING; + + p54spi_power_on(priv); + + ret = p54spi_upload_firmware(dev); + if (ret < 0) { + p54spi_power_off(priv); + goto out_unlock; + } + + mutex_unlock(&priv->mutex); + + timeout = msecs_to_jiffies(2000); + timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp, + timeout); + if (!timeout) { + dev_err(&priv->spi->dev, "firmware boot failed"); + p54spi_power_off(priv); + ret = -1; + goto out; + } + + if (mutex_lock_interruptible(&priv->mutex)) { + ret = -EINTR; + p54spi_power_off(priv); + goto out; + } + + WARN_ON(priv->fw_state != FW_STATE_READY); + +out_unlock: + mutex_unlock(&priv->mutex); + +out: + return ret; +} + +static void p54spi_op_stop(struct ieee80211_hw *dev) +{ + struct p54s_priv *priv = dev->priv; + unsigned long flags; + + mutex_lock(&priv->mutex); + WARN_ON(priv->fw_state != FW_STATE_READY); + + p54spi_power_off(priv); + spin_lock_irqsave(&priv->tx_lock, flags); + INIT_LIST_HEAD(&priv->tx_pending); + spin_unlock_irqrestore(&priv->tx_lock, flags); + + priv->fw_state = FW_STATE_OFF; + mutex_unlock(&priv->mutex); + + cancel_work_sync(&priv->work); +} + +static int p54spi_probe(struct spi_device *spi) +{ + struct p54s_priv *priv = NULL; + struct ieee80211_hw *hw; + int ret = -EINVAL; + + hw = p54_init_common(sizeof(*priv)); + if (!hw) { + dev_err(&spi->dev, "could not alloc ieee80211_hw"); + return -ENOMEM; + } + + priv = hw->priv; + priv->hw = hw; + spi_set_drvdata(spi, priv); + priv->spi = spi; + + spi->bits_per_word = 16; + spi->max_speed_hz = 24000000; + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&priv->spi->dev, "spi_setup failed"); + goto err_free; + } + + ret = gpio_request(p54spi_gpio_power, "p54spi power"); + if (ret < 0) { + dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret); + goto err_free; + } + + ret = gpio_request(p54spi_gpio_irq, "p54spi irq"); + if (ret < 0) { + dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret); + goto err_free_gpio_power; + } + + gpio_direction_output(p54spi_gpio_power, 0); + gpio_direction_input(p54spi_gpio_irq); + + ret = request_irq(gpio_to_irq(p54spi_gpio_irq), + p54spi_interrupt, 0, "p54spi", + priv->spi); + if (ret < 0) { + dev_err(&priv->spi->dev, "request_irq() failed"); + goto err_free_gpio_irq; + } + + irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING); + + disable_irq(gpio_to_irq(p54spi_gpio_irq)); + + INIT_WORK(&priv->work, p54spi_work); + init_completion(&priv->fw_comp); + INIT_LIST_HEAD(&priv->tx_pending); + mutex_init(&priv->mutex); + spin_lock_init(&priv->tx_lock); + SET_IEEE80211_DEV(hw, &spi->dev); + priv->common.open = p54spi_op_start; + priv->common.stop = p54spi_op_stop; + priv->common.tx = p54spi_op_tx; + + ret = p54spi_request_firmware(hw); + if (ret < 0) + goto err_free_common; + + ret = p54spi_request_eeprom(hw); + if (ret) + goto err_free_common; + + ret = p54_register_common(hw, &priv->spi->dev); + if (ret) + goto err_free_common; + + return 0; + +err_free_common: + free_irq(gpio_to_irq(p54spi_gpio_irq), spi); +err_free_gpio_irq: + gpio_free(p54spi_gpio_irq); +err_free_gpio_power: + gpio_free(p54spi_gpio_power); +err_free: + p54_free_common(priv->hw); + return ret; +} + +static int p54spi_remove(struct spi_device *spi) +{ + struct p54s_priv *priv = spi_get_drvdata(spi); + + p54_unregister_common(priv->hw); + + free_irq(gpio_to_irq(p54spi_gpio_irq), spi); + + gpio_free(p54spi_gpio_power); + gpio_free(p54spi_gpio_irq); + release_firmware(priv->firmware); + + mutex_destroy(&priv->mutex); + + p54_free_common(priv->hw); + + return 0; +} + + +static struct spi_driver p54spi_driver = { + .driver = { + .name = "p54spi", + }, + + .probe = p54spi_probe, + .remove = p54spi_remove, +}; + +module_spi_driver(p54spi_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>"); +MODULE_ALIAS("spi:cx3110x"); +MODULE_ALIAS("spi:p54spi"); +MODULE_ALIAS("spi:stlc45xx"); diff --git a/drivers/net/wireless/intersil/p54/p54spi.h b/drivers/net/wireless/intersil/p54/p54spi.h new file mode 100644 index 000000000..dfaa62aae --- /dev/null +++ b/drivers/net/wireless/intersil/p54/p54spi.h @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de> + * + * This driver is a port from stlc45xx: + * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef P54SPI_H +#define P54SPI_H + +#include <linux/mutex.h> +#include <linux/list.h> +#include <net/mac80211.h> + +#include "p54.h" + +/* Bit 15 is read/write bit; ON = READ, OFF = WRITE */ +#define SPI_ADRS_READ_BIT_15 0x8000 + +#define SPI_ADRS_ARM_INTERRUPTS 0x00 +#define SPI_ADRS_ARM_INT_EN 0x04 + +#define SPI_ADRS_HOST_INTERRUPTS 0x08 +#define SPI_ADRS_HOST_INT_EN 0x0c +#define SPI_ADRS_HOST_INT_ACK 0x10 + +#define SPI_ADRS_GEN_PURP_1 0x14 +#define SPI_ADRS_GEN_PURP_2 0x18 + +#define SPI_ADRS_DEV_CTRL_STAT 0x26 /* high word */ + +#define SPI_ADRS_DMA_DATA 0x28 + +#define SPI_ADRS_DMA_WRITE_CTRL 0x2c +#define SPI_ADRS_DMA_WRITE_LEN 0x2e +#define SPI_ADRS_DMA_WRITE_BASE 0x30 + +#define SPI_ADRS_DMA_READ_CTRL 0x34 +#define SPI_ADRS_DMA_READ_LEN 0x36 +#define SPI_ADRS_DMA_READ_BASE 0x38 + +#define SPI_CTRL_STAT_HOST_OVERRIDE 0x8000 +#define SPI_CTRL_STAT_START_HALTED 0x4000 +#define SPI_CTRL_STAT_RAM_BOOT 0x2000 +#define SPI_CTRL_STAT_HOST_RESET 0x1000 +#define SPI_CTRL_STAT_HOST_CPU_EN 0x0800 + +#define SPI_DMA_WRITE_CTRL_ENABLE 0x0001 +#define SPI_DMA_READ_CTRL_ENABLE 0x0001 +#define HOST_ALLOWED (1 << 7) + +#define SPI_TIMEOUT 100 /* msec */ + +#define SPI_MAX_TX_PACKETS 32 + +#define SPI_MAX_PACKET_SIZE 32767 + +#define SPI_TARGET_INT_WAKEUP 0x00000001 +#define SPI_TARGET_INT_SLEEP 0x00000002 +#define SPI_TARGET_INT_RDDONE 0x00000004 + +#define SPI_TARGET_INT_CTS 0x00004000 +#define SPI_TARGET_INT_DR 0x00008000 + +#define SPI_HOST_INT_READY 0x00000001 +#define SPI_HOST_INT_WR_READY 0x00000002 +#define SPI_HOST_INT_SW_UPDATE 0x00000004 +#define SPI_HOST_INT_UPDATE 0x10000000 + +/* clear to send */ +#define SPI_HOST_INT_CR 0x00004000 + +/* data ready */ +#define SPI_HOST_INT_DR 0x00008000 + +#define SPI_HOST_INTS_DEFAULT \ + (SPI_HOST_INT_READY | SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE) + +#define TARGET_BOOT_SLEEP 50 + +struct p54s_dma_regs { + __le16 cmd; + __le16 len; + __le32 addr; +} __packed; + +struct p54s_tx_info { + struct list_head tx_list; +}; + +struct p54s_priv { + /* p54_common has to be the first entry */ + struct p54_common common; + struct ieee80211_hw *hw; + struct spi_device *spi; + + struct work_struct work; + + struct mutex mutex; + struct completion fw_comp; + + spinlock_t tx_lock; + + /* protected by tx_lock */ + struct list_head tx_pending; + + enum fw_state fw_state; + const struct firmware *firmware; +}; + +#endif /* P54SPI_H */ diff --git a/drivers/net/wireless/intersil/p54/p54spi_eeprom.h b/drivers/net/wireless/intersil/p54/p54spi_eeprom.h new file mode 100644 index 000000000..0b7bfb0ad --- /dev/null +++ b/drivers/net/wireless/intersil/p54/p54spi_eeprom.h @@ -0,0 +1,679 @@ +/* + * Copyright (C) 2003 Conexant Americas Inc. All Rights Reserved. + * Copyright (C) 2004, 2005, 2006 Nokia Corporation + * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> + * Copyright 2008 Christian Lamparter <chunkeey@web.de> + * + * based on: + * - cx3110x's pda.h from Nokia + * - cx3110-transfer.log by Johannes Berg + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef P54SPI_EEPROM_H +#define P54SPI_EEPROM_H + +static unsigned char p54spi_eeprom[] = { + +/* struct eeprom_pda_wrap */ +0x47, 0x4d, 0x55, 0xaa, /* magic */ +0x00, 0x00, /* pad */ +0x00, 0x00, /* eeprom_pda_data_wrap length */ +0x00, 0x00, 0x00, 0x00, /* arm opcode */ + +/* bogus MAC address */ +0x04, 0x00, 0x01, 0x01, /* PDR_MAC_ADDRESS */ + 0x00, 0x02, 0xee, 0xc0, 0xff, 0xee, + +/* struct bootrec_exp_if */ +0x06, 0x00, 0x01, 0x10, /* PDR_INTERFACE_LIST */ + 0x00, 0x00, /* role */ + 0x0f, 0x00, /* if_id */ + 0x85, 0x00, /* variant = Longbow RF, 2GHz */ + 0x01, 0x00, /* btm_compat */ + 0x1f, 0x00, /* top_compat */ + +0x03, 0x00, 0x02, 0x10, /* PDR_HARDWARE_PLATFORM_COMPONENT_ID */ + 0x03, 0x20, 0x00, 0x43, + +/* struct pda_country[6] */ +0x0d, 0x00, 0x07, 0x10, /* PDR_COUNTRY_LIST */ + 0x10, 0x00, 0x00, 0x00, + 0x20, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x00, + 0x31, 0x00, 0x00, 0x00, + 0x32, 0x00, 0x00, 0x00, + 0x40, 0x00, 0x00, 0x00, + +/* struct pda_country */ +0x03, 0x00, 0x08, 0x10, /* PDR_DEFAULT_COUNTRY */ + 0x30, 0x00, 0x00, 0x00, /* ETSI */ + +0x03, 0x00, 0x00, 0x11, /* PDR_ANTENNA_GAIN */ + 0x08, 0x08, 0x08, 0x08, + +0x0a, 0x00, 0xff, 0xca, /* PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2 */ + 0x01, 0x00, 0x0a, 0x00, + 0x00, 0x00, 0x0a, 0x00, + 0x85, 0x09, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, + +/* struct pda_custom_wrapper */ +0x10, 0x06, 0x5d, 0xb0, /* PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM */ + 0x0d, 0x00, 0xee, 0x00, /* 13 entries, 238 bytes per entry */ + 0x00, 0x00, 0x16, 0x0c, /* no offset, 3094 total len */ + /* 2412 MHz */ + 0x6c, 0x09, + 0x10, 0x01, 0x9a, 0x84, + 0xaa, 0x8a, 0xaa, 0x8a, 0xaa, 0x8a, 0xaa, 0x8a, + 0x3c, 0xb6, 0x3c, 0xb6, 0x3c, 0xb6, 0x3c, 0xb6, + 0x3c, 0xb6, 0x3c, 0xb6, 0x3c, 0xb6, 0x3c, 0xb6, + 0xf0, 0x00, 0x94, 0x6c, + 0x99, 0x82, 0x99, 0x82, 0x99, 0x82, 0x99, 0x82, + 0x2b, 0xae, 0x2b, 0xae, 0x2b, 0xae, 0x2b, 0xae, + 0x2b, 0xae, 0x2b, 0xae, 0x2b, 0xae, 0x2b, 0xae, + 0xd0, 0x00, 0xaa, 0x5a, + 0x88, 0x7a, 0x88, 0x7a, 0x88, 0x7a, 0x88, 0x7a, + 0x1a, 0xa6, 0x1a, 0xa6, 0x1a, 0xa6, 0x1a, 0xa6, + 0x1a, 0xa6, 0x1a, 0xa6, 0x1a, 0xa6, 0x1a, 0xa6, + 0xa0, 0x00, 0xf3, 0x47, + 0x6e, 0x6e, 0x6e, 0x6e, 0x6e, 0x6e, 0x6e, 0x6e, + 0x00, 0x9a, 0x00, 0x9a, 0x00, 0x9a, 0x00, 0x9a, + 0x00, 0x9a, 0x00, 0x9a, 0x00, 0x9a, 0x00, 0x9a, + 0x50, 0x00, 0x59, 0x36, + 0x43, 0x5a, 0x43, 0x5a, 0x43, 0x5a, 0x43, 0x5a, + 0xd5, 0x85, 0xd5, 0x85, 0xd5, 0x85, 0xd5, 0x85, + 0xd5, 0x85, 0xd5, 0x85, 0xd5, 0x85, 0xd5, 0x85, + 0x00, 0x00, 0xe4, 0x2d, + 0x18, 0x46, 0x18, 0x46, 0x18, 0x46, 0x18, 0x46, + 0xaa, 0x71, 0xaa, 0x71, 0xaa, 0x71, 0xaa, 0x71, + 0xaa, 0x71, 0xaa, 0x71, 0xaa, 0x71, 0xaa, 0x71, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2417 MHz */ + 0x71, 0x09, + 0x10, 0x01, 0xb9, 0x83, + 0x7d, 0x8a, 0x7d, 0x8a, 0x7d, 0x8a, 0x7d, 0x8a, + 0x0f, 0xb6, 0x0f, 0xb6, 0x0f, 0xb6, 0x0f, 0xb6, + 0x0f, 0xb6, 0x0f, 0xb6, 0x0f, 0xb6, 0x0f, 0xb6, + 0xf0, 0x00, 0x2e, 0x6c, + 0x68, 0x82, 0x68, 0x82, 0x68, 0x82, 0x68, 0x82, + 0xfa, 0xad, 0xfa, 0xad, 0xfa, 0xad, 0xfa, 0xad, + 0xfa, 0xad, 0xfa, 0xad, 0xfa, 0xad, 0xfa, 0xad, + 0xd0, 0x00, 0x8d, 0x5a, + 0x52, 0x7a, 0x52, 0x7a, 0x52, 0x7a, 0x52, 0x7a, + 0xe4, 0xa5, 0xe4, 0xa5, 0xe4, 0xa5, 0xe4, 0xa5, + 0xe4, 0xa5, 0xe4, 0xa5, 0xe4, 0xa5, 0xe4, 0xa5, + 0xa0, 0x00, 0x0a, 0x48, + 0x32, 0x6e, 0x32, 0x6e, 0x32, 0x6e, 0x32, 0x6e, + 0xc4, 0x99, 0xc4, 0x99, 0xc4, 0x99, 0xc4, 0x99, + 0xc4, 0x99, 0xc4, 0x99, 0xc4, 0x99, 0xc4, 0x99, + 0x50, 0x00, 0x7c, 0x36, + 0xfc, 0x59, 0xfc, 0x59, 0xfc, 0x59, 0xfc, 0x59, + 0x8e, 0x85, 0x8e, 0x85, 0x8e, 0x85, 0x8e, 0x85, + 0x8e, 0x85, 0x8e, 0x85, 0x8e, 0x85, 0x8e, 0x85, + 0x00, 0x00, 0xf5, 0x2d, + 0xc6, 0x45, 0xc6, 0x45, 0xc6, 0x45, 0xc6, 0x45, + 0x58, 0x71, 0x58, 0x71, 0x58, 0x71, 0x58, 0x71, + 0x58, 0x71, 0x58, 0x71, 0x58, 0x71, 0x58, 0x71, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2422 MHz */ + 0x76, 0x09, + 0x10, 0x01, 0xb9, 0x83, + 0x7d, 0x8a, 0x7d, 0x8a, 0x7d, 0x8a, 0x7d, 0x8a, + 0x0f, 0xb6, 0x0f, 0xb6, 0x0f, 0xb6, 0x0f, 0xb6, + 0x0f, 0xb6, 0x0f, 0xb6, 0x0f, 0xb6, 0x0f, 0xb6, + 0xf0, 0x00, 0x2e, 0x6c, + 0x68, 0x82, 0x68, 0x82, 0x68, 0x82, 0x68, 0x82, + 0xfa, 0xad, 0xfa, 0xad, 0xfa, 0xad, 0xfa, 0xad, + 0xfa, 0xad, 0xfa, 0xad, 0xfa, 0xad, 0xfa, 0xad, + 0xd0, 0x00, 0x8d, 0x5a, + 0x52, 0x7a, 0x52, 0x7a, 0x52, 0x7a, 0x52, 0x7a, + 0xe4, 0xa5, 0xe4, 0xa5, 0xe4, 0xa5, 0xe4, 0xa5, + 0xe4, 0xa5, 0xe4, 0xa5, 0xe4, 0xa5, 0xe4, 0xa5, + 0xa0, 0x00, 0x0a, 0x48, + 0x32, 0x6e, 0x32, 0x6e, 0x32, 0x6e, 0x32, 0x6e, + 0xc4, 0x99, 0xc4, 0x99, 0xc4, 0x99, 0xc4, 0x99, + 0xc4, 0x99, 0xc4, 0x99, 0xc4, 0x99, 0xc4, 0x99, + 0x50, 0x00, 0x7c, 0x36, + 0xfc, 0x59, 0xfc, 0x59, 0xfc, 0x59, 0xfc, 0x59, + 0x8e, 0x85, 0x8e, 0x85, 0x8e, 0x85, 0x8e, 0x85, + 0x8e, 0x85, 0x8e, 0x85, 0x8e, 0x85, 0x8e, 0x85, + 0x00, 0x00, 0xf5, 0x2d, + 0xc6, 0x45, 0xc6, 0x45, 0xc6, 0x45, 0xc6, 0x45, + 0x58, 0x71, 0x58, 0x71, 0x58, 0x71, 0x58, 0x71, + 0x58, 0x71, 0x58, 0x71, 0x58, 0x71, 0x58, 0x71, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2427 MHz */ + 0x7b, 0x09, + 0x10, 0x01, 0x48, 0x83, + 0x67, 0x8a, 0x67, 0x8a, 0x67, 0x8a, 0x67, 0x8a, + 0xf9, 0xb5, 0xf9, 0xb5, 0xf9, 0xb5, 0xf9, 0xb5, + 0xf9, 0xb5, 0xf9, 0xb5, 0xf9, 0xb5, 0xf9, 0xb5, + 0xf0, 0x00, 0xfb, 0x6b, + 0x50, 0x82, 0x50, 0x82, 0x50, 0x82, 0x50, 0x82, + 0xe2, 0xad, 0xe2, 0xad, 0xe2, 0xad, 0xe2, 0xad, + 0xe2, 0xad, 0xe2, 0xad, 0xe2, 0xad, 0xe2, 0xad, + 0xd0, 0x00, 0x7e, 0x5a, + 0x38, 0x7a, 0x38, 0x7a, 0x38, 0x7a, 0x38, 0x7a, + 0xca, 0xa5, 0xca, 0xa5, 0xca, 0xa5, 0xca, 0xa5, + 0xca, 0xa5, 0xca, 0xa5, 0xca, 0xa5, 0xca, 0xa5, + 0xa0, 0x00, 0x15, 0x48, + 0x14, 0x6e, 0x14, 0x6e, 0x14, 0x6e, 0x14, 0x6e, + 0xa6, 0x99, 0xa6, 0x99, 0xa6, 0x99, 0xa6, 0x99, + 0xa6, 0x99, 0xa6, 0x99, 0xa6, 0x99, 0xa6, 0x99, + 0x50, 0x00, 0x8e, 0x36, + 0xd9, 0x59, 0xd9, 0x59, 0xd9, 0x59, 0xd9, 0x59, + 0x6b, 0x85, 0x6b, 0x85, 0x6b, 0x85, 0x6b, 0x85, + 0x6b, 0x85, 0x6b, 0x85, 0x6b, 0x85, 0x6b, 0x85, + 0x00, 0x00, 0xfe, 0x2d, + 0x9d, 0x45, 0x9d, 0x45, 0x9d, 0x45, 0x9d, 0x45, + 0x2f, 0x71, 0x2f, 0x71, 0x2f, 0x71, 0x2f, 0x71, + 0x2f, 0x71, 0x2f, 0x71, 0x2f, 0x71, 0x2f, 0x71, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2432 MHz */ + 0x80, 0x09, + 0x10, 0x01, 0xd7, 0x82, + 0x51, 0x8a, 0x51, 0x8a, 0x51, 0x8a, 0x51, 0x8a, + 0xe3, 0xb5, 0xe3, 0xb5, 0xe3, 0xb5, 0xe3, 0xb5, + 0xe3, 0xb5, 0xe3, 0xb5, 0xe3, 0xb5, 0xe3, 0xb5, + 0xf0, 0x00, 0xc8, 0x6b, + 0x37, 0x82, 0x37, 0x82, 0x37, 0x82, 0x37, 0x82, + 0xc9, 0xad, 0xc9, 0xad, 0xc9, 0xad, 0xc9, 0xad, + 0xc9, 0xad, 0xc9, 0xad, 0xc9, 0xad, 0xc9, 0xad, + 0xd0, 0x00, 0x6f, 0x5a, + 0x1d, 0x7a, 0x1d, 0x7a, 0x1d, 0x7a, 0x1d, 0x7a, + 0xaf, 0xa5, 0xaf, 0xa5, 0xaf, 0xa5, 0xaf, 0xa5, + 0xaf, 0xa5, 0xaf, 0xa5, 0xaf, 0xa5, 0xaf, 0xa5, + 0xa0, 0x00, 0x20, 0x48, + 0xf6, 0x6d, 0xf6, 0x6d, 0xf6, 0x6d, 0xf6, 0x6d, + 0x88, 0x99, 0x88, 0x99, 0x88, 0x99, 0x88, 0x99, + 0x88, 0x99, 0x88, 0x99, 0x88, 0x99, 0x88, 0x99, + 0x50, 0x00, 0x9f, 0x36, + 0xb5, 0x59, 0xb5, 0x59, 0xb5, 0x59, 0xb5, 0x59, + 0x47, 0x85, 0x47, 0x85, 0x47, 0x85, 0x47, 0x85, + 0x47, 0x85, 0x47, 0x85, 0x47, 0x85, 0x47, 0x85, + 0x00, 0x00, 0x06, 0x2e, + 0x74, 0x45, 0x74, 0x45, 0x74, 0x45, 0x74, 0x45, + 0x06, 0x71, 0x06, 0x71, 0x06, 0x71, 0x06, 0x71, + 0x06, 0x71, 0x06, 0x71, 0x06, 0x71, 0x06, 0x71, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2437 MHz */ + 0x85, 0x09, + 0x10, 0x01, 0x67, 0x82, + 0x3a, 0x8a, 0x3a, 0x8a, 0x3a, 0x8a, 0x3a, 0x8a, + 0xcc, 0xb5, 0xcc, 0xb5, 0xcc, 0xb5, 0xcc, 0xb5, + 0xcc, 0xb5, 0xcc, 0xb5, 0xcc, 0xb5, 0xcc, 0xb5, + 0xf0, 0x00, 0x95, 0x6b, + 0x1f, 0x82, 0x1f, 0x82, 0x1f, 0x82, 0x1f, 0x82, + 0xb1, 0xad, 0xb1, 0xad, 0xb1, 0xad, 0xb1, 0xad, + 0xb1, 0xad, 0xb1, 0xad, 0xb1, 0xad, 0xb1, 0xad, + 0xd0, 0x00, 0x61, 0x5a, + 0x02, 0x7a, 0x02, 0x7a, 0x02, 0x7a, 0x02, 0x7a, + 0x94, 0xa5, 0x94, 0xa5, 0x94, 0xa5, 0x94, 0xa5, + 0x94, 0xa5, 0x94, 0xa5, 0x94, 0xa5, 0x94, 0xa5, + 0xa0, 0x00, 0x2c, 0x48, + 0xd8, 0x6d, 0xd8, 0x6d, 0xd8, 0x6d, 0xd8, 0x6d, + 0x6a, 0x99, 0x6a, 0x99, 0x6a, 0x99, 0x6a, 0x99, + 0x6a, 0x99, 0x6a, 0x99, 0x6a, 0x99, 0x6a, 0x99, + 0x50, 0x00, 0xb1, 0x36, + 0x92, 0x59, 0x92, 0x59, 0x92, 0x59, 0x92, 0x59, + 0x24, 0x85, 0x24, 0x85, 0x24, 0x85, 0x24, 0x85, + 0x24, 0x85, 0x24, 0x85, 0x24, 0x85, 0x24, 0x85, + 0x00, 0x00, 0x0f, 0x2e, + 0x4b, 0x45, 0x4b, 0x45, 0x4b, 0x45, 0x4b, 0x45, + 0xdd, 0x70, 0xdd, 0x70, 0xdd, 0x70, 0xdd, 0x70, + 0xdd, 0x70, 0xdd, 0x70, 0xdd, 0x70, 0xdd, 0x70, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2442 MHz */ + 0x8a, 0x09, + 0x10, 0x01, 0xf6, 0x81, + 0x24, 0x8a, 0x24, 0x8a, 0x24, 0x8a, 0x24, 0x8a, + 0xb6, 0xb5, 0xb6, 0xb5, 0xb6, 0xb5, 0xb6, 0xb5, + 0xb6, 0xb5, 0xb6, 0xb5, 0xb6, 0xb5, 0xb6, 0xb5, + 0xf0, 0x00, 0x62, 0x6b, + 0x06, 0x82, 0x06, 0x82, 0x06, 0x82, 0x06, 0x82, + 0x98, 0xad, 0x98, 0xad, 0x98, 0xad, 0x98, 0xad, + 0x98, 0xad, 0x98, 0xad, 0x98, 0xad, 0x98, 0xad, + 0xd0, 0x00, 0x52, 0x5a, + 0xe7, 0x79, 0xe7, 0x79, 0xe7, 0x79, 0xe7, 0x79, + 0x79, 0xa5, 0x79, 0xa5, 0x79, 0xa5, 0x79, 0xa5, + 0x79, 0xa5, 0x79, 0xa5, 0x79, 0xa5, 0x79, 0xa5, + 0xa0, 0x00, 0x37, 0x48, + 0xba, 0x6d, 0xba, 0x6d, 0xba, 0x6d, 0xba, 0x6d, + 0x4c, 0x99, 0x4c, 0x99, 0x4c, 0x99, 0x4c, 0x99, + 0x4c, 0x99, 0x4c, 0x99, 0x4c, 0x99, 0x4c, 0x99, + 0x50, 0x00, 0xc2, 0x36, + 0x6e, 0x59, 0x6e, 0x59, 0x6e, 0x59, 0x6e, 0x59, + 0x00, 0x85, 0x00, 0x85, 0x00, 0x85, 0x00, 0x85, + 0x00, 0x85, 0x00, 0x85, 0x00, 0x85, 0x00, 0x85, + 0x00, 0x00, 0x17, 0x2e, + 0x22, 0x45, 0x22, 0x45, 0x22, 0x45, 0x22, 0x45, + 0xb4, 0x70, 0xb4, 0x70, 0xb4, 0x70, 0xb4, 0x70, + 0xb4, 0x70, 0xb4, 0x70, 0xb4, 0x70, 0xb4, 0x70, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2447 MHz */ + 0x8f, 0x09, + 0x10, 0x01, 0x75, 0x83, + 0x61, 0x8a, 0x61, 0x8a, 0x61, 0x8a, 0x61, 0x8a, + 0xf3, 0xb5, 0xf3, 0xb5, 0xf3, 0xb5, 0xf3, 0xb5, + 0xf3, 0xb5, 0xf3, 0xb5, 0xf3, 0xb5, 0xf3, 0xb5, + 0xf0, 0x00, 0x4b, 0x6c, + 0x3f, 0x82, 0x3f, 0x82, 0x3f, 0x82, 0x3f, 0x82, + 0xd1, 0xad, 0xd1, 0xad, 0xd1, 0xad, 0xd1, 0xad, + 0xd1, 0xad, 0xd1, 0xad, 0xd1, 0xad, 0xd1, 0xad, + 0xd0, 0x00, 0xda, 0x5a, + 0x1c, 0x7a, 0x1c, 0x7a, 0x1c, 0x7a, 0x1c, 0x7a, + 0xae, 0xa5, 0xae, 0xa5, 0xae, 0xa5, 0xae, 0xa5, + 0xae, 0xa5, 0xae, 0xa5, 0xae, 0xa5, 0xae, 0xa5, + 0xa0, 0x00, 0x6d, 0x48, + 0xe9, 0x6d, 0xe9, 0x6d, 0xe9, 0x6d, 0xe9, 0x6d, + 0x7b, 0x99, 0x7b, 0x99, 0x7b, 0x99, 0x7b, 0x99, + 0x7b, 0x99, 0x7b, 0x99, 0x7b, 0x99, 0x7b, 0x99, + 0x50, 0x00, 0xc6, 0x36, + 0x92, 0x59, 0x92, 0x59, 0x92, 0x59, 0x92, 0x59, + 0x24, 0x85, 0x24, 0x85, 0x24, 0x85, 0x24, 0x85, + 0x24, 0x85, 0x24, 0x85, 0x24, 0x85, 0x24, 0x85, + 0x00, 0x00, 0x15, 0x2e, + 0x3c, 0x45, 0x3c, 0x45, 0x3c, 0x45, 0x3c, 0x45, + 0xce, 0x70, 0xce, 0x70, 0xce, 0x70, 0xce, 0x70, + 0xce, 0x70, 0xce, 0x70, 0xce, 0x70, 0xce, 0x70, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2452 MHz */ + 0x94, 0x09, + 0x10, 0x01, 0xf4, 0x84, + 0x9e, 0x8a, 0x9e, 0x8a, 0x9e, 0x8a, 0x9e, 0x8a, + 0x30, 0xb6, 0x30, 0xb6, 0x30, 0xb6, 0x30, 0xb6, + 0x30, 0xb6, 0x30, 0xb6, 0x30, 0xb6, 0x30, 0xb6, + 0xf0, 0x00, 0x34, 0x6d, + 0x77, 0x82, 0x77, 0x82, 0x77, 0x82, 0x77, 0x82, + 0x09, 0xae, 0x09, 0xae, 0x09, 0xae, 0x09, 0xae, + 0x09, 0xae, 0x09, 0xae, 0x09, 0xae, 0x09, 0xae, + 0xd0, 0x00, 0x62, 0x5b, + 0x50, 0x7a, 0x50, 0x7a, 0x50, 0x7a, 0x50, 0x7a, + 0xe2, 0xa5, 0xe2, 0xa5, 0xe2, 0xa5, 0xe2, 0xa5, + 0xe2, 0xa5, 0xe2, 0xa5, 0xe2, 0xa5, 0xe2, 0xa5, + 0xa0, 0x00, 0xa2, 0x48, + 0x17, 0x6e, 0x17, 0x6e, 0x17, 0x6e, 0x17, 0x6e, + 0xa9, 0x99, 0xa9, 0x99, 0xa9, 0x99, 0xa9, 0x99, + 0xa9, 0x99, 0xa9, 0x99, 0xa9, 0x99, 0xa9, 0x99, + 0x50, 0x00, 0xc9, 0x36, + 0xb7, 0x59, 0xb7, 0x59, 0xb7, 0x59, 0xb7, 0x59, + 0x49, 0x85, 0x49, 0x85, 0x49, 0x85, 0x49, 0x85, + 0x49, 0x85, 0x49, 0x85, 0x49, 0x85, 0x49, 0x85, + 0x00, 0x00, 0x12, 0x2e, + 0x57, 0x45, 0x57, 0x45, 0x57, 0x45, 0x57, 0x45, + 0xe9, 0x70, 0xe9, 0x70, 0xe9, 0x70, 0xe9, 0x70, + 0xe9, 0x70, 0xe9, 0x70, 0xe9, 0x70, 0xe9, 0x70, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2452 MHz */ + 0x99, 0x09, + 0x10, 0x01, 0x74, 0x86, + 0xdb, 0x8a, 0xdb, 0x8a, 0xdb, 0x8a, 0xdb, 0x8a, + 0x6d, 0xb6, 0x6d, 0xb6, 0x6d, 0xb6, 0x6d, 0xb6, + 0x6d, 0xb6, 0x6d, 0xb6, 0x6d, 0xb6, 0x6d, 0xb6, + 0xf0, 0x00, 0x1e, 0x6e, + 0xb0, 0x82, 0xb0, 0x82, 0xb0, 0x82, 0xb0, 0x82, + 0x42, 0xae, 0x42, 0xae, 0x42, 0xae, 0x42, 0xae, + 0x42, 0xae, 0x42, 0xae, 0x42, 0xae, 0x42, 0xae, + 0xd0, 0x00, 0xeb, 0x5b, + 0x85, 0x7a, 0x85, 0x7a, 0x85, 0x7a, 0x85, 0x7a, + 0x17, 0xa6, 0x17, 0xa6, 0x17, 0xa6, 0x17, 0xa6, + 0x17, 0xa6, 0x17, 0xa6, 0x17, 0xa6, 0x17, 0xa6, + 0xa0, 0x00, 0xd8, 0x48, + 0x46, 0x6e, 0x46, 0x6e, 0x46, 0x6e, 0x46, 0x6e, + 0xd8, 0x99, 0xd8, 0x99, 0xd8, 0x99, 0xd8, 0x99, + 0xd8, 0x99, 0xd8, 0x99, 0xd8, 0x99, 0xd8, 0x99, + 0x50, 0x00, 0xcd, 0x36, + 0xdb, 0x59, 0xdb, 0x59, 0xdb, 0x59, 0xdb, 0x59, + 0x6d, 0x85, 0x6d, 0x85, 0x6d, 0x85, 0x6d, 0x85, + 0x6d, 0x85, 0x6d, 0x85, 0x6d, 0x85, 0x6d, 0x85, + 0x00, 0x00, 0x10, 0x2e, + 0x71, 0x45, 0x71, 0x45, 0x71, 0x45, 0x71, 0x45, + 0x03, 0x71, 0x03, 0x71, 0x03, 0x71, 0x03, 0x71, + 0x03, 0x71, 0x03, 0x71, 0x03, 0x71, 0x03, 0x71, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2557 MHz */ + 0x9e, 0x09, + 0x10, 0x01, 0xf3, 0x87, + 0x17, 0x8b, 0x17, 0x8b, 0x17, 0x8b, 0x17, 0x8b, + 0xa9, 0xb6, 0xa9, 0xb6, 0xa9, 0xb6, 0xa9, 0xb6, + 0xa9, 0xb6, 0xa9, 0xb6, 0xa9, 0xb6, 0xa9, 0xb6, + 0xf0, 0x00, 0x07, 0x6f, + 0xe9, 0x82, 0xe9, 0x82, 0xe9, 0x82, 0xe9, 0x82, + 0x7b, 0xae, 0x7b, 0xae, 0x7b, 0xae, 0x7b, 0xae, + 0x7b, 0xae, 0x7b, 0xae, 0x7b, 0xae, 0x7b, 0xae, + 0xd0, 0x00, 0x73, 0x5c, + 0xba, 0x7a, 0xba, 0x7a, 0xba, 0x7a, 0xba, 0x7a, + 0x4c, 0xa6, 0x4c, 0xa6, 0x4c, 0xa6, 0x4c, 0xa6, + 0x4c, 0xa6, 0x4c, 0xa6, 0x4c, 0xa6, 0x4c, 0xa6, + 0xa0, 0x00, 0x0d, 0x49, + 0x74, 0x6e, 0x74, 0x6e, 0x74, 0x6e, 0x74, 0x6e, + 0x06, 0x9a, 0x06, 0x9a, 0x06, 0x9a, 0x06, 0x9a, + 0x06, 0x9a, 0x06, 0x9a, 0x06, 0x9a, 0x06, 0x9a, + 0x50, 0x00, 0xd1, 0x36, + 0xff, 0x59, 0xff, 0x59, 0xff, 0x59, 0xff, 0x59, + 0x91, 0x85, 0x91, 0x85, 0x91, 0x85, 0x91, 0x85, + 0x91, 0x85, 0x91, 0x85, 0x91, 0x85, 0x91, 0x85, + 0x00, 0x00, 0x0e, 0x2e, + 0x8b, 0x45, 0x8b, 0x45, 0x8b, 0x45, 0x8b, 0x45, + 0x1d, 0x71, 0x1d, 0x71, 0x1d, 0x71, 0x1d, 0x71, + 0x1d, 0x71, 0x1d, 0x71, 0x1d, 0x71, 0x1d, 0x71, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2562 MHz */ + 0xa3, 0x09, + 0x10, 0x01, 0x72, 0x89, + 0x54, 0x8b, 0x54, 0x8b, 0x54, 0x8b, 0x54, 0x8b, + 0xe6, 0xb6, 0xe6, 0xb6, 0xe6, 0xb6, 0xe6, 0xb6, + 0xe6, 0xb6, 0xe6, 0xb6, 0xe6, 0xb6, 0xe6, 0xb6, + 0xf0, 0x00, 0xf0, 0x6f, + 0x21, 0x83, 0x21, 0x83, 0x21, 0x83, 0x21, 0x83, + 0xb3, 0xae, 0xb3, 0xae, 0xb3, 0xae, 0xb3, 0xae, + 0xb3, 0xae, 0xb3, 0xae, 0xb3, 0xae, 0xb3, 0xae, + 0xd0, 0x00, 0xfb, 0x5c, + 0xee, 0x7a, 0xee, 0x7a, 0xee, 0x7a, 0xee, 0x7a, + 0x80, 0xa6, 0x80, 0xa6, 0x80, 0xa6, 0x80, 0xa6, + 0x80, 0xa6, 0x80, 0xa6, 0x80, 0xa6, 0x80, 0xa6, + 0xa0, 0x00, 0x43, 0x49, + 0xa3, 0x6e, 0xa3, 0x6e, 0xa3, 0x6e, 0xa3, 0x6e, + 0x35, 0x9a, 0x35, 0x9a, 0x35, 0x9a, 0x35, 0x9a, + 0x35, 0x9a, 0x35, 0x9a, 0x35, 0x9a, 0x35, 0x9a, + 0x50, 0x00, 0xd4, 0x36, + 0x24, 0x5a, 0x24, 0x5a, 0x24, 0x5a, 0x24, 0x5a, + 0xb6, 0x85, 0xb6, 0x85, 0xb6, 0x85, 0xb6, 0x85, + 0xb6, 0x85, 0xb6, 0x85, 0xb6, 0x85, 0xb6, 0x85, + 0x00, 0x00, 0x0b, 0x2e, + 0xa6, 0x45, 0xa6, 0x45, 0xa6, 0x45, 0xa6, 0x45, + 0x38, 0x71, 0x38, 0x71, 0x38, 0x71, 0x38, 0x71, + 0x38, 0x71, 0x38, 0x71, 0x38, 0x71, 0x38, 0x71, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + + /* 2572 MHz */ + 0xa8, 0x09, + 0x10, 0x01, 0xf1, 0x8a, + 0x91, 0x8b, 0x91, 0x8b, 0x91, 0x8b, 0x91, 0x8b, + 0x23, 0xb7, 0x23, 0xb7, 0x23, 0xb7, 0x23, 0xb7, + 0x23, 0xb7, 0x23, 0xb7, 0x23, 0xb7, 0x23, 0xb7, + 0xf0, 0x00, 0xd9, 0x70, + 0x5a, 0x83, 0x5a, 0x83, 0x5a, 0x83, 0x5a, 0x83, + 0xec, 0xae, 0xec, 0xae, 0xec, 0xae, 0xec, 0xae, + 0xec, 0xae, 0xec, 0xae, 0xec, 0xae, 0xec, 0xae, + 0xd0, 0x00, 0x83, 0x5d, + 0x23, 0x7b, 0x23, 0x7b, 0x23, 0x7b, 0x23, 0x7b, + 0xb5, 0xa6, 0xb5, 0xa6, 0xb5, 0xa6, 0xb5, 0xa6, + 0xb5, 0xa6, 0xb5, 0xa6, 0xb5, 0xa6, 0xb5, 0xa6, + 0xa0, 0x00, 0x78, 0x49, + 0xd1, 0x6e, 0xd1, 0x6e, 0xd1, 0x6e, 0xd1, 0x6e, + 0x63, 0x9a, 0x63, 0x9a, 0x63, 0x9a, 0x63, 0x9a, + 0x63, 0x9a, 0x63, 0x9a, 0x63, 0x9a, 0x63, 0x9a, + 0x50, 0x00, 0xd8, 0x36, + 0x48, 0x5a, 0x48, 0x5a, 0x48, 0x5a, 0x48, 0x5a, + 0xda, 0x85, 0xda, 0x85, 0xda, 0x85, 0xda, 0x85, + 0xda, 0x85, 0xda, 0x85, 0xda, 0x85, 0xda, 0x85, + 0x00, 0x00, 0x09, 0x2e, + 0xc0, 0x45, 0xc0, 0x45, 0xc0, 0x45, 0xc0, 0x45, + 0x52, 0x71, 0x52, 0x71, 0x52, 0x71, 0x52, 0x71, + 0x52, 0x71, 0x52, 0x71, 0x52, 0x71, 0x52, 0x71, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, + +/* + * Not really sure if this is actually the power_limit database, + * it looks a bit "related" to PDR_PRISM_ZIF_TX_IQ_CALIBRATION + */ +/* struct pda_custom_wrapper */ +0xae, 0x00, 0xef, 0xbe, /* PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM */ + 0x0d, 0x00, 0x1a, 0x00, /* 13 entries, 26 bytes per entry */ + 0x00, 0x00, 0x52, 0x01, /* no offset, 338 bytes total */ + + /* 2412 MHz */ + 0x6c, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xe0, 0x00, 0xe0, 0x00, 0xe0, 0x00, 0xe0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2417 MHz */ + 0x71, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2422 MHz */ + 0x76, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2427 MHz */ + 0x7b, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2432 MHz */ + 0x80, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2437 MHz */ + 0x85, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2442 MHz */ + 0x8a, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2447 MHz */ + 0x8f, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2452 MHz */ + 0x94, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2457 MHz */ + 0x99, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2462 MHz */ + 0x9e, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2467 MHz */ + 0xa3, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + + /* 2472 MHz */ + 0xa8, 0x09, + 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, + 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, + 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, + +/* struct pda_iq_autocal_entry[13] */ +0x42, 0x00, 0x06, 0x19, /* PDR_PRISM_ZIF_TX_IQ_CALIBRATION */ + /* 2412 MHz */ + 0x6c, 0x09, 0x26, 0x00, 0xf8, 0xff, 0xf7, 0xff, 0xff, 0x00, + /* 2417 MHz */ + 0x71, 0x09, 0x26, 0x00, 0xf8, 0xff, 0xf7, 0xff, 0xff, 0x00, + /* 2422 MHz */ + 0x76, 0x09, 0x26, 0x00, 0xf8, 0xff, 0xf7, 0xff, 0xff, 0x00, + /* 2427 MHz */ + 0x7b, 0x09, 0x26, 0x00, 0xf8, 0xff, 0xf7, 0xff, 0xff, 0x00, + /* 2432 MHz */ + 0x80, 0x09, 0x25, 0x00, 0xf7, 0xff, 0xf7, 0xff, 0xff, 0x00, + /* 2437 MHz */ + 0x85, 0x09, 0x25, 0x00, 0xf7, 0xff, 0xf7, 0xff, 0xff, 0x00, + /* 2442 MHz */ + 0x8a, 0x09, 0x25, 0x00, 0xf7, 0xff, 0xf7, 0xff, 0xff, 0x00, + /* 2447 MHz */ + 0x8f, 0x09, 0x25, 0x00, 0xf7, 0xff, 0xf7, 0xff, 0xff, 0x00, + /* 2452 MHz */ + 0x94, 0x09, 0x25, 0x00, 0xf7, 0xff, 0xf7, 0xff, 0xff, 0x00, + /* 2457 MHz */ + 0x99, 0x09, 0x25, 0x00, 0xf5, 0xff, 0xf9, 0xff, 0x00, 0x01, + /* 2462 MHz */ + 0x9e, 0x09, 0x25, 0x00, 0xf5, 0xff, 0xf9, 0xff, 0x00, 0x01, + /* 2467 MHz */ + 0xa3, 0x09, 0x25, 0x00, 0xf5, 0xff, 0xf9, 0xff, 0x00, 0x01, + /* 2472 MHz */ + 0xa8, 0x09, 0x25, 0x00, 0xf5, 0xff, 0xf9, 0xff, 0x00, 0x01, + +0x02, 0x00, 0x00, 0x00, /* PDR_END */ + 0xb6, 0x04, +}; + +#endif /* P54SPI_EEPROM_H */ + diff --git a/drivers/net/wireless/intersil/p54/p54usb.c b/drivers/net/wireless/intersil/p54/p54usb.c new file mode 100644 index 000000000..6c6019dd4 --- /dev/null +++ b/drivers/net/wireless/intersil/p54/p54usb.c @@ -0,0 +1,1148 @@ + +/* + * Linux device driver for USB based Prism54 + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/usb.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/crc32.h> +#include <linux/module.h> +#include <net/mac80211.h> + +#include "p54.h" +#include "lmac.h" +#include "p54usb.h" + +MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); +MODULE_DESCRIPTION("Prism54 USB wireless driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("prism54usb"); +/*(DEBLOBBED)*/ + +/* + * Note: + * + * Always update our wiki's device list (located at: + * http://wireless.kernel.org/en/users/Drivers/p54/devices ), + * whenever you add a new device. + */ + +static struct usb_device_id p54u_table[] = { + /* Version 1 devices (pci chip + net2280) */ + {USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */ + {USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */ + {USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */ + {USB_DEVICE(0x0675, 0x0530)}, /* DrayTek Vigor 530 */ + {USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */ + {USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */ + {USB_DEVICE(0x07aa, 0x001c)}, /* Corega CG-WLUSB2GT */ + {USB_DEVICE(0x083a, 0x4501)}, /* Accton 802.11g WN4501 USB */ + {USB_DEVICE(0x083a, 0x4502)}, /* Siemens Gigaset USB Adapter */ + {USB_DEVICE(0x083a, 0x5501)}, /* Phillips CPWUA054 */ + {USB_DEVICE(0x0846, 0x4200)}, /* Netgear WG121 */ + {USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */ + {USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */ + {USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */ + {USB_DEVICE(0x0bf8, 0x1007)}, /* Fujitsu E-5400 USB */ + {USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */ + {USB_DEVICE(0x0db0, 0x6826)}, /* MSI UB54G (MS-6826) */ + {USB_DEVICE(0x107b, 0x55f2)}, /* Gateway WGU-210 (Gemtek) */ + {USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */ + {USB_DEVICE(0x1435, 0x0210)}, /* Inventel UR054G */ + {USB_DEVICE(0x15a9, 0x0002)}, /* Gemtek WUBI-100GW 802.11g */ + {USB_DEVICE(0x1630, 0x0005)}, /* 2Wire 802.11g USB (v1) / Z-Com */ + {USB_DEVICE(0x182d, 0x096b)}, /* Sitecom WL-107 */ + {USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */ + {USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */ + {USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */ + {USB_DEVICE(0x2001, 0x3703)}, /* DLink DWL-G122 */ + {USB_DEVICE(0x2001, 0x3762)}, /* Conceptronic C54U */ + {USB_DEVICE(0x5041, 0x2234)}, /* Linksys WUSB54G */ + {USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */ + + /* Version 2 devices (3887) */ + {USB_DEVICE(0x0471, 0x1230)}, /* Philips CPWUA054/00 */ + {USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */ + {USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */ + {USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */ + {USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */ + {USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */ + {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */ + {USB_DEVICE(0x07aa, 0x0020)}, /* Corega WLUSB2GTST USB */ + {USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */ + {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */ + {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */ + {USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */ + {USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */ + {USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */ + {USB_DEVICE(0x0915, 0x2000)}, /* Cohiba Proto board */ + {USB_DEVICE(0x0915, 0x2002)}, /* Cohiba Proto board */ + {USB_DEVICE(0x0baf, 0x0118)}, /* U.S. Robotics U5 802.11g Adapter*/ + {USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/ + /* {USB_DEVICE(0x0cde, 0x0006)}, * Medion MD40900 already listed above, + * just noting it here for clarity */ + {USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */ + {USB_DEVICE(0x0cde, 0x0015)}, /* Zcomax XG-705A */ + {USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */ + {USB_DEVICE(0x124a, 0x4025)}, /* IOGear GWU513 (GW3887IK chip) */ + {USB_DEVICE(0x1260, 0xee22)}, /* SMC 2862W-G version 2 */ + {USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */ + {USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */ + {USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */ + {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ + /* {USB_DEVICE(0x15a9, 0x0002)}, * Also SparkLAN WL-682 with 3887 */ + {USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */ + {USB_DEVICE(0x1740, 0x1000)}, /* Senao NUB-350 */ + {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ + {USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */ + {USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */ + {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */ + {USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */ + {} +}; + +MODULE_DEVICE_TABLE(usb, p54u_table); + +static const struct { + u32 intf; + enum p54u_hw_type type; + const char *fw; + char hw[20]; +} p54u_fwlist[__NUM_P54U_HWTYPES] = { + { + .type = P54U_NET2280, + .intf = FW_LM86, + .fw = "/*(DEBLOBBED)*/", + .hw = "ISL3886 + net2280", + }, + { + .type = P54U_3887, + .intf = FW_LM87, + .fw = "/*(DEBLOBBED)*/", + .hw = "ISL3887", + }, +}; + +static void p54u_rx_cb(struct urb *urb) +{ + struct sk_buff *skb = (struct sk_buff *) urb->context; + struct p54u_rx_info *info = (struct p54u_rx_info *)skb->cb; + struct ieee80211_hw *dev = info->dev; + struct p54u_priv *priv = dev->priv; + + skb_unlink(skb, &priv->rx_queue); + + if (unlikely(urb->status)) { + dev_kfree_skb_irq(skb); + return; + } + + skb_put(skb, urb->actual_length); + + if (priv->hw_type == P54U_NET2280) + skb_pull(skb, priv->common.tx_hdr_len); + if (priv->common.fw_interface == FW_LM87) { + skb_pull(skb, 4); + skb_put(skb, 4); + } + + if (p54_rx(dev, skb)) { + skb = dev_alloc_skb(priv->common.rx_mtu + 32); + if (unlikely(!skb)) { + /* TODO check rx queue length and refill *somewhere* */ + return; + } + + info = (struct p54u_rx_info *) skb->cb; + info->urb = urb; + info->dev = dev; + urb->transfer_buffer = skb_tail_pointer(skb); + urb->context = skb; + } else { + if (priv->hw_type == P54U_NET2280) + skb_push(skb, priv->common.tx_hdr_len); + if (priv->common.fw_interface == FW_LM87) { + skb_push(skb, 4); + skb_put(skb, 4); + } + skb_reset_tail_pointer(skb); + skb_trim(skb, 0); + urb->transfer_buffer = skb_tail_pointer(skb); + } + skb_queue_tail(&priv->rx_queue, skb); + usb_anchor_urb(urb, &priv->submitted); + if (usb_submit_urb(urb, GFP_ATOMIC)) { + skb_unlink(skb, &priv->rx_queue); + usb_unanchor_urb(urb); + dev_kfree_skb_irq(skb); + } +} + +static void p54u_tx_cb(struct urb *urb) +{ + struct sk_buff *skb = urb->context; + struct ieee80211_hw *dev = + usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); + + p54_free_skb(dev, skb); +} + +static void p54u_tx_dummy_cb(struct urb *urb) { } + +static void p54u_free_urbs(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + usb_kill_anchored_urbs(&priv->submitted); +} + +static void p54u_stop(struct ieee80211_hw *dev) +{ + /* + * TODO: figure out how to reliably stop the 3887 and net2280 so + * the hardware is still usable next time we want to start it. + * until then, we just stop listening to the hardware.. + */ + p54u_free_urbs(dev); +} + +static int p54u_init_urbs(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + struct urb *entry = NULL; + struct sk_buff *skb; + struct p54u_rx_info *info; + int ret = 0; + + while (skb_queue_len(&priv->rx_queue) < 32) { + skb = __dev_alloc_skb(priv->common.rx_mtu + 32, GFP_KERNEL); + if (!skb) { + ret = -ENOMEM; + goto err; + } + entry = usb_alloc_urb(0, GFP_KERNEL); + if (!entry) { + ret = -ENOMEM; + goto err; + } + + usb_fill_bulk_urb(entry, priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), + skb_tail_pointer(skb), + priv->common.rx_mtu + 32, p54u_rx_cb, skb); + info = (struct p54u_rx_info *) skb->cb; + info->urb = entry; + info->dev = dev; + skb_queue_tail(&priv->rx_queue, skb); + + usb_anchor_urb(entry, &priv->submitted); + ret = usb_submit_urb(entry, GFP_KERNEL); + if (ret) { + skb_unlink(skb, &priv->rx_queue); + usb_unanchor_urb(entry); + goto err; + } + usb_free_urb(entry); + entry = NULL; + } + + return 0; + + err: + usb_free_urb(entry); + kfree_skb(skb); + p54u_free_urbs(dev); + return ret; +} + +static int p54u_open(struct ieee80211_hw *dev) +{ + /* + * TODO: Because we don't know how to reliably stop the 3887 and + * the isl3886+net2280, other than brutally cut off all + * communications. We have to reinitialize the urbs on every start. + */ + return p54u_init_urbs(dev); +} + +static __le32 p54u_lm87_chksum(const __le32 *data, size_t length) +{ + u32 chk = 0; + + length >>= 2; + while (length--) { + chk ^= le32_to_cpu(*data++); + chk = (chk >> 5) ^ (chk << 3); + } + + return cpu_to_le32(chk); +} + +static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + struct p54u_priv *priv = dev->priv; + struct urb *data_urb; + struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); + + data_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!data_urb) { + p54_free_skb(dev, skb); + return; + } + + hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len); + hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id; + + usb_fill_bulk_urb(data_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), + hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? + p54u_tx_cb : p54u_tx_dummy_cb, skb); + data_urb->transfer_flags |= URB_ZERO_PACKET; + + usb_anchor_urb(data_urb, &priv->submitted); + if (usb_submit_urb(data_urb, GFP_ATOMIC)) { + usb_unanchor_urb(data_urb); + p54_free_skb(dev, skb); + } + usb_free_urb(data_urb); +} + +static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + struct p54u_priv *priv = dev->priv; + struct urb *int_urb = NULL, *data_urb = NULL; + struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); + struct net2280_reg_write *reg = NULL; + int err = -ENOMEM; + + reg = kmalloc(sizeof(*reg), GFP_ATOMIC); + if (!reg) + goto out; + + int_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!int_urb) + goto out; + + data_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!data_urb) + goto out; + + reg->port = cpu_to_le16(NET2280_DEV_U32); + reg->addr = cpu_to_le32(P54U_DEV_BASE); + reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); + + memset(hdr, 0, sizeof(*hdr)); + hdr->len = cpu_to_le16(skb->len); + hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id; + + usb_fill_bulk_urb(int_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg), + p54u_tx_dummy_cb, dev); + + /* + * URB_FREE_BUFFER triggers a code path in the USB subsystem that will + * free what is inside the transfer_buffer after the last reference to + * the int_urb is dropped. + */ + int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET; + reg = NULL; + + usb_fill_bulk_urb(data_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), + hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? + p54u_tx_cb : p54u_tx_dummy_cb, skb); + data_urb->transfer_flags |= URB_ZERO_PACKET; + + usb_anchor_urb(int_urb, &priv->submitted); + err = usb_submit_urb(int_urb, GFP_ATOMIC); + if (err) { + usb_unanchor_urb(int_urb); + goto out; + } + + usb_anchor_urb(data_urb, &priv->submitted); + err = usb_submit_urb(data_urb, GFP_ATOMIC); + if (err) { + usb_unanchor_urb(data_urb); + goto out; + } +out: + usb_free_urb(int_urb); + usb_free_urb(data_urb); + + if (err) { + kfree(reg); + p54_free_skb(dev, skb); + } +} + +static int p54u_write(struct p54u_priv *priv, + struct net2280_reg_write *buf, + enum net2280_op_type type, + __le32 addr, __le32 val) +{ + unsigned int ep; + int alen; + + if (type & 0x0800) + ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV); + else + ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_BRG); + + buf->port = cpu_to_le16(type); + buf->addr = addr; + buf->val = val; + + return usb_bulk_msg(priv->udev, ep, buf, sizeof(*buf), &alen, 1000); +} + +static int p54u_read(struct p54u_priv *priv, void *buf, + enum net2280_op_type type, + __le32 addr, __le32 *val) +{ + struct net2280_reg_read *read = buf; + __le32 *reg = buf; + unsigned int ep; + int alen, err; + + if (type & 0x0800) + ep = P54U_PIPE_DEV; + else + ep = P54U_PIPE_BRG; + + read->port = cpu_to_le16(type); + read->addr = addr; + + err = usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), + read, sizeof(*read), &alen, 1000); + if (err) + return err; + + err = usb_bulk_msg(priv->udev, usb_rcvbulkpipe(priv->udev, ep), + reg, sizeof(*reg), &alen, 1000); + if (err) + return err; + + *val = *reg; + return 0; +} + +static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep, + void *data, size_t len) +{ + int alen; + return usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), + data, len, &alen, 2000); +} + +static int p54u_device_reset(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + int ret, lock = (priv->intf->condition != USB_INTERFACE_BINDING); + + if (lock) { + ret = usb_lock_device_for_reset(priv->udev, priv->intf); + if (ret < 0) { + dev_err(&priv->udev->dev, "(p54usb) unable to lock " + "device for reset (%d)!\n", ret); + return ret; + } + } + + ret = usb_reset_device(priv->udev); + if (lock) + usb_unlock_device(priv->udev); + + if (ret) + dev_err(&priv->udev->dev, "(p54usb) unable to reset " + "device (%d)!\n", ret); + + return ret; +} + +static const char p54u_romboot_3887[] = "~~~~"; +static int p54u_firmware_reset_3887(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + u8 *buf; + int ret; + + buf = kmemdup(p54u_romboot_3887, 4, GFP_KERNEL); + if (!buf) + return -ENOMEM; + ret = p54u_bulk_msg(priv, P54U_PIPE_DATA, + buf, 4); + kfree(buf); + if (ret) + dev_err(&priv->udev->dev, "(p54usb) unable to jump to " + "boot ROM (%d)!\n", ret); + + return ret; +} + +static const char p54u_firmware_upload_3887[] = "<\r"; +static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + int err, alen; + u8 carry = 0; + u8 *buf, *tmp; + const u8 *data; + unsigned int left, remains, block_size; + struct x2_header *hdr; + unsigned long timeout; + + err = p54u_firmware_reset_3887(dev); + if (err) + return err; + + tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + left = block_size = min_t(size_t, P54U_FW_BLOCK, priv->fw->size); + strcpy(buf, p54u_firmware_upload_3887); + left -= strlen(p54u_firmware_upload_3887); + tmp += strlen(p54u_firmware_upload_3887); + + data = priv->fw->data; + remains = priv->fw->size; + + hdr = (struct x2_header *)(buf + strlen(p54u_firmware_upload_3887)); + memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE); + hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR); + hdr->fw_length = cpu_to_le32(priv->fw->size); + hdr->crc = cpu_to_le32(~crc32_le(~0, (void *)&hdr->fw_load_addr, + sizeof(u32)*2)); + left -= sizeof(*hdr); + tmp += sizeof(*hdr); + + while (remains) { + while (left--) { + if (carry) { + *tmp++ = carry; + carry = 0; + remains--; + continue; + } + switch (*data) { + case '~': + *tmp++ = '}'; + carry = '^'; + break; + case '}': + *tmp++ = '}'; + carry = ']'; + break; + default: + *tmp++ = *data; + remains--; + break; + } + data++; + } + + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size); + if (err) { + dev_err(&priv->udev->dev, "(p54usb) firmware " + "upload failed!\n"); + goto err_upload_failed; + } + + tmp = buf; + left = block_size = min((unsigned int)P54U_FW_BLOCK, remains); + } + + *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, priv->fw->data, + priv->fw->size)); + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); + if (err) { + dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n"); + goto err_upload_failed; + } + timeout = jiffies + msecs_to_jiffies(1000); + while (!(err = usb_bulk_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { + if (alen > 2 && !memcmp(buf, "OK", 2)) + break; + + if (alen > 5 && !memcmp(buf, "ERROR", 5)) { + err = -EINVAL; + break; + } + + if (time_after(jiffies, timeout)) { + dev_err(&priv->udev->dev, "(p54usb) firmware boot " + "timed out!\n"); + err = -ETIMEDOUT; + break; + } + } + if (err) { + dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n"); + goto err_upload_failed; + } + + buf[0] = 'g'; + buf[1] = '\r'; + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2); + if (err) { + dev_err(&priv->udev->dev, "(p54usb) firmware boot failed!\n"); + goto err_upload_failed; + } + + timeout = jiffies + msecs_to_jiffies(1000); + while (!(err = usb_bulk_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { + if (alen > 0 && buf[0] == 'g') + break; + + if (time_after(jiffies, timeout)) { + err = -ETIMEDOUT; + break; + } + } + if (err) + goto err_upload_failed; + +err_upload_failed: + kfree(buf); + return err; +} + +static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + const struct p54p_csr *devreg = (const struct p54p_csr *) P54U_DEV_BASE; + int err, alen; + void *buf; + __le32 reg; + unsigned int remains, offset; + const u8 *data; + + buf = kmalloc(512, GFP_KERNEL); + if (!buf) + return -ENOMEM; + +#define P54U_WRITE(type, addr, data) \ + do {\ + err = p54u_write(priv, buf, type,\ + cpu_to_le32((u32)(unsigned long)addr), data);\ + if (err) \ + goto fail;\ + } while (0) + +#define P54U_READ(type, addr) \ + do {\ + err = p54u_read(priv, buf, type,\ + cpu_to_le32((u32)(unsigned long)addr), ®);\ + if (err)\ + goto fail;\ + } while (0) + + /* power down net2280 bridge */ + P54U_READ(NET2280_BRG_U32, NET2280_GPIOCTL); + reg |= cpu_to_le32(P54U_BRG_POWER_DOWN); + reg &= cpu_to_le32(~P54U_BRG_POWER_UP); + P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); + + mdelay(100); + + /* power up bridge */ + reg |= cpu_to_le32(P54U_BRG_POWER_UP); + reg &= cpu_to_le32(~P54U_BRG_POWER_DOWN); + P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); + + mdelay(100); + + P54U_WRITE(NET2280_BRG_U32, NET2280_DEVINIT, + cpu_to_le32(NET2280_CLK_30Mhz | + NET2280_PCI_ENABLE | + NET2280_PCI_SOFT_RESET)); + + mdelay(20); + + P54U_WRITE(NET2280_BRG_CFG_U16, PCI_COMMAND, + cpu_to_le32(PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER)); + + P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_0, + cpu_to_le32(NET2280_BASE)); + + P54U_READ(NET2280_BRG_CFG_U16, PCI_STATUS); + reg |= cpu_to_le32(PCI_STATUS_REC_MASTER_ABORT); + P54U_WRITE(NET2280_BRG_CFG_U16, PCI_STATUS, reg); + + // TODO: we really need this? + P54U_READ(NET2280_BRG_U32, NET2280_RELNUM); + + P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_RSP, + cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); + P54U_WRITE(NET2280_BRG_U32, NET2280_EPC_RSP, + cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); + + P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_2, + cpu_to_le32(NET2280_BASE2)); + + /* finally done setting up the bridge */ + + P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | PCI_COMMAND, + cpu_to_le32(PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER)); + + P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | 0x40 /* TRDY timeout */, 0); + P54U_WRITE(NET2280_DEV_CFG_U32, 0x10000 | PCI_BASE_ADDRESS_0, + cpu_to_le32(P54U_DEV_BASE)); + + P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); + P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); + + /* do romboot */ + P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, 0); + + P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(20); + + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(20); + + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(100); + + P54U_READ(NET2280_DEV_U32, &devreg->int_ident); + P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); + + /* finally, we can upload firmware now! */ + remains = priv->fw->size; + data = priv->fw->data; + offset = ISL38XX_DEV_FIRMWARE_ADDR; + + while (remains) { + unsigned int block_len = min(remains, (unsigned int)512); + memcpy(buf, data, block_len); + + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len); + if (err) { + dev_err(&priv->udev->dev, "(p54usb) firmware block " + "upload failed\n"); + goto fail; + } + + P54U_WRITE(NET2280_DEV_U32, &devreg->direct_mem_base, + cpu_to_le32(0xc0000f00)); + + P54U_WRITE(NET2280_DEV_U32, + 0x0020 | (unsigned long)&devreg->direct_mem_win, 0); + P54U_WRITE(NET2280_DEV_U32, + 0x0020 | (unsigned long)&devreg->direct_mem_win, + cpu_to_le32(1)); + + P54U_WRITE(NET2280_DEV_U32, + 0x0024 | (unsigned long)&devreg->direct_mem_win, + cpu_to_le32(block_len)); + P54U_WRITE(NET2280_DEV_U32, + 0x0028 | (unsigned long)&devreg->direct_mem_win, + cpu_to_le32(offset)); + + P54U_WRITE(NET2280_DEV_U32, &devreg->dma_addr, + cpu_to_le32(NET2280_EPA_FIFO_PCI_ADDR)); + P54U_WRITE(NET2280_DEV_U32, &devreg->dma_len, + cpu_to_le32(block_len >> 2)); + P54U_WRITE(NET2280_DEV_U32, &devreg->dma_ctrl, + cpu_to_le32(ISL38XX_DMA_MASTER_CONTROL_TRIGGER)); + + mdelay(10); + + P54U_READ(NET2280_DEV_U32, + 0x002C | (unsigned long)&devreg->direct_mem_win); + if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) || + !(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) { + dev_err(&priv->udev->dev, "(p54usb) firmware DMA " + "transfer failed\n"); + goto fail; + } + + P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_STAT, + cpu_to_le32(NET2280_FIFO_FLUSH)); + + remains -= block_len; + data += block_len; + offset += block_len; + } + + /* do ramboot */ + P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(20); + + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(100); + + P54U_READ(NET2280_DEV_U32, &devreg->int_ident); + P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); + + /* start up the firmware */ + P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, + cpu_to_le32(ISL38XX_INT_IDENT_INIT)); + + P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); + + P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT_ENABLE | + NET2280_USB_INTERRUPT_ENABLE)); + + P54U_WRITE(NET2280_DEV_U32, &devreg->dev_int, + cpu_to_le32(ISL38XX_DEV_INT_RESET)); + + err = usb_interrupt_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_INT), + buf, sizeof(__le32), &alen, 1000); + if (err || alen != sizeof(__le32)) + goto fail; + + P54U_READ(NET2280_DEV_U32, &devreg->int_ident); + P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); + + if (!(reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))) + err = -EINVAL; + + P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); + P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); + +#undef P54U_WRITE +#undef P54U_READ + +fail: + kfree(buf); + return err; +} + +static int p54_find_type(struct p54u_priv *priv) +{ + int i; + + for (i = 0; i < __NUM_P54U_HWTYPES; i++) + if (p54u_fwlist[i].type == priv->hw_type) + break; + if (i == __NUM_P54U_HWTYPES) + return -EOPNOTSUPP; + + return i; +} + +static int p54u_start_ops(struct p54u_priv *priv) +{ + struct ieee80211_hw *dev = priv->common.hw; + int ret; + + ret = p54_parse_firmware(dev, priv->fw); + if (ret) + goto err_out; + + ret = p54_find_type(priv); + if (ret < 0) + goto err_out; + + if (priv->common.fw_interface != p54u_fwlist[ret].intf) { + dev_err(&priv->udev->dev, "wrong firmware, please get " + "a firmware for \"%s\" and try again.\n", + p54u_fwlist[ret].hw); + ret = -ENODEV; + goto err_out; + } + + ret = priv->upload_fw(dev); + if (ret) + goto err_out; + + ret = p54u_open(dev); + if (ret) + goto err_out; + + ret = p54_read_eeprom(dev); + if (ret) + goto err_stop; + + p54u_stop(dev); + + ret = p54_register_common(dev, &priv->udev->dev); + if (ret) + goto err_stop; + + return 0; + +err_stop: + p54u_stop(dev); + +err_out: + /* + * p54u_disconnect will do the rest of the + * cleanup + */ + return ret; +} + +static void p54u_load_firmware_cb(const struct firmware *firmware, + void *context) +{ + struct p54u_priv *priv = context; + struct usb_device *udev = priv->udev; + int err; + + complete(&priv->fw_wait_load); + if (firmware) { + priv->fw = firmware; + err = p54u_start_ops(priv); + } else { + err = -ENOENT; + dev_err(&udev->dev, "Firmware not found.\n"); + } + + if (err) { + struct device *parent = priv->udev->dev.parent; + + dev_err(&udev->dev, "failed to initialize device (%d)\n", err); + + if (parent) + device_lock(parent); + + device_release_driver(&udev->dev); + /* + * At this point p54u_disconnect has already freed + * the "priv" context. Do not use it anymore! + */ + priv = NULL; + + if (parent) + device_unlock(parent); + } + + usb_put_dev(udev); +} + +static int p54u_load_firmware(struct ieee80211_hw *dev, + struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct p54u_priv *priv = dev->priv; + struct device *device = &udev->dev; + int err, i; + + BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES); + + init_completion(&priv->fw_wait_load); + i = p54_find_type(priv); + if (i < 0) + return i; + + dev_info(&priv->udev->dev, "Loading firmware file %s\n", + p54u_fwlist[i].fw); + + usb_get_dev(udev); + err = reject_firmware_nowait(THIS_MODULE, 1, p54u_fwlist[i].fw, + device, GFP_KERNEL, priv, + p54u_load_firmware_cb); + if (err) { + dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s " + "(%d)!\n", p54u_fwlist[i].fw, err); + usb_put_dev(udev); + } + + return err; +} + +static int p54u_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct ieee80211_hw *dev; + struct p54u_priv *priv; + int err; + unsigned int i, recognized_pipes; + + dev = p54_init_common(sizeof(*priv)); + + if (!dev) { + dev_err(&udev->dev, "(p54usb) ieee80211 alloc failed\n"); + return -ENOMEM; + } + + priv = dev->priv; + priv->hw_type = P54U_INVALID_HW; + + SET_IEEE80211_DEV(dev, &intf->dev); + usb_set_intfdata(intf, dev); + priv->udev = udev; + priv->intf = intf; + skb_queue_head_init(&priv->rx_queue); + init_usb_anchor(&priv->submitted); + + usb_get_dev(udev); + + /* really lazy and simple way of figuring out if we're a 3887 */ + /* TODO: should just stick the identification in the device table */ + i = intf->altsetting->desc.bNumEndpoints; + recognized_pipes = 0; + while (i--) { + switch (intf->altsetting->endpoint[i].desc.bEndpointAddress) { + case P54U_PIPE_DATA: + case P54U_PIPE_MGMT: + case P54U_PIPE_BRG: + case P54U_PIPE_DEV: + case P54U_PIPE_DATA | USB_DIR_IN: + case P54U_PIPE_MGMT | USB_DIR_IN: + case P54U_PIPE_BRG | USB_DIR_IN: + case P54U_PIPE_DEV | USB_DIR_IN: + case P54U_PIPE_INT | USB_DIR_IN: + recognized_pipes++; + } + } + priv->common.open = p54u_open; + priv->common.stop = p54u_stop; + if (recognized_pipes < P54U_PIPE_NUMBER) { +#ifdef CONFIG_PM + /* ISL3887 needs a full reset on resume */ + udev->reset_resume = 1; +#endif /* CONFIG_PM */ + err = p54u_device_reset(dev); + + priv->hw_type = P54U_3887; + dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr); + priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr); + priv->common.tx = p54u_tx_lm87; + priv->upload_fw = p54u_upload_firmware_3887; + } else { + priv->hw_type = P54U_NET2280; + dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr); + priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr); + priv->common.tx = p54u_tx_net2280; + priv->upload_fw = p54u_upload_firmware_net2280; + } + err = p54u_load_firmware(dev, intf); + if (err) { + usb_put_dev(udev); + p54_free_common(dev); + } + return err; +} + +static void p54u_disconnect(struct usb_interface *intf) +{ + struct ieee80211_hw *dev = usb_get_intfdata(intf); + struct p54u_priv *priv; + + if (!dev) + return; + + priv = dev->priv; + wait_for_completion(&priv->fw_wait_load); + p54_unregister_common(dev); + + usb_put_dev(interface_to_usbdev(intf)); + release_firmware(priv->fw); + p54_free_common(dev); +} + +static int p54u_pre_reset(struct usb_interface *intf) +{ + struct ieee80211_hw *dev = usb_get_intfdata(intf); + + if (!dev) + return -ENODEV; + + p54u_stop(dev); + return 0; +} + +static int p54u_resume(struct usb_interface *intf) +{ + struct ieee80211_hw *dev = usb_get_intfdata(intf); + struct p54u_priv *priv; + + if (!dev) + return -ENODEV; + + priv = dev->priv; + if (unlikely(!(priv->upload_fw && priv->fw))) + return 0; + + return priv->upload_fw(dev); +} + +static int p54u_post_reset(struct usb_interface *intf) +{ + struct ieee80211_hw *dev = usb_get_intfdata(intf); + struct p54u_priv *priv; + int err; + + err = p54u_resume(intf); + if (err) + return err; + + /* reinitialize old device state */ + priv = dev->priv; + if (priv->common.mode != NL80211_IFTYPE_UNSPECIFIED) + ieee80211_restart_hw(dev); + + return 0; +} + +#ifdef CONFIG_PM + +static int p54u_suspend(struct usb_interface *intf, pm_message_t message) +{ + return p54u_pre_reset(intf); +} + +#endif /* CONFIG_PM */ + +static struct usb_driver p54u_driver = { + .name = "p54usb", + .id_table = p54u_table, + .probe = p54u_probe, + .disconnect = p54u_disconnect, + .pre_reset = p54u_pre_reset, + .post_reset = p54u_post_reset, +#ifdef CONFIG_PM + .suspend = p54u_suspend, + .resume = p54u_resume, + .reset_resume = p54u_resume, +#endif /* CONFIG_PM */ + .soft_unbind = 1, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(p54u_driver); diff --git a/drivers/net/wireless/intersil/p54/p54usb.h b/drivers/net/wireless/intersil/p54/p54usb.h new file mode 100644 index 000000000..e63af2f02 --- /dev/null +++ b/drivers/net/wireless/intersil/p54/p54usb.h @@ -0,0 +1,162 @@ +#ifndef P54USB_H +#define P54USB_H + +/* + * Defines for USB based mac80211 Prism54 driver + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/*(DEBLOBBED)*/ +#include "p54pci.h" +#include <linux/usb/net2280.h> + +/* pci */ +#define NET2280_BASE 0x10000000 +#define NET2280_BASE2 0x20000000 + +/* gpio */ +#define P54U_BRG_POWER_UP (1 << GPIO0_DATA) +#define P54U_BRG_POWER_DOWN (1 << GPIO1_DATA) + +/* devinit */ +#define NET2280_CLK_4Mhz (15 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_CLK_30Mhz (2 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_CLK_60Mhz (1 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_CLK_STOP (0 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_PCI_ENABLE (1 << PCI_ENABLE) +#define NET2280_PCI_SOFT_RESET (1 << PCI_SOFT_RESET) + +/* endpoints */ +#define NET2280_CLEAR_NAK_OUT_PACKETS_MODE (1 << CLEAR_NAK_OUT_PACKETS_MODE) +#define NET2280_FIFO_FLUSH (1 << FIFO_FLUSH) + +/* irq */ +#define NET2280_USB_INTERRUPT_ENABLE (1 << USB_INTERRUPT_ENABLE) +#define NET2280_PCI_INTA_INTERRUPT (1 << PCI_INTA_INTERRUPT) +#define NET2280_PCI_INTA_INTERRUPT_ENABLE (1 << PCI_INTA_INTERRUPT_ENABLE) + +/* registers */ +#define NET2280_DEVINIT 0x00 +#define NET2280_USBIRQENB1 0x24 +#define NET2280_IRQSTAT1 0x2c +#define NET2280_FIFOCTL 0x38 +#define NET2280_GPIOCTL 0x50 +#define NET2280_RELNUM 0x88 +#define NET2280_EPA_RSP 0x324 +#define NET2280_EPA_STAT 0x32c +#define NET2280_EPB_STAT 0x34c +#define NET2280_EPC_RSP 0x364 +#define NET2280_EPC_STAT 0x36c +#define NET2280_EPD_STAT 0x38c + +#define NET2280_EPA_CFG 0x320 +#define NET2280_EPB_CFG 0x340 +#define NET2280_EPC_CFG 0x360 +#define NET2280_EPD_CFG 0x380 +#define NET2280_EPE_CFG 0x3A0 +#define NET2280_EPF_CFG 0x3C0 +#define P54U_DEV_BASE 0x40000000 + +struct net2280_tx_hdr { + __le32 device_addr; + __le16 len; + __le16 follower; /* ? */ + u8 padding[8]; +} __packed; + +struct lm87_tx_hdr { + __le32 device_addr; + __le32 chksum; +} __packed; + +/* Some flags for the isl hardware registers controlling DMA inside the + * chip */ +#define ISL38XX_DMA_STATUS_DONE 0x00000001 +#define ISL38XX_DMA_STATUS_READY 0x00000002 +#define NET2280_EPA_FIFO_PCI_ADDR 0x20000000 +#define ISL38XX_DMA_MASTER_CONTROL_TRIGGER 0x00000004 + +enum net2280_op_type { + NET2280_BRG_U32 = 0x001F, + NET2280_BRG_CFG_U32 = 0x000F, + NET2280_BRG_CFG_U16 = 0x0003, + NET2280_DEV_U32 = 0x080F, + NET2280_DEV_CFG_U32 = 0x088F, + NET2280_DEV_CFG_U16 = 0x0883 +}; + +struct net2280_reg_write { + __le16 port; + __le32 addr; + __le32 val; +} __packed; + +struct net2280_reg_read { + __le16 port; + __le32 addr; +} __packed; + +#define P54U_FW_BLOCK 2048 + +#define X2_SIGNATURE "x2 " +#define X2_SIGNATURE_SIZE 4 + +struct x2_header { + u8 signature[X2_SIGNATURE_SIZE]; + __le32 fw_load_addr; + __le32 fw_length; + __le32 crc; +} __packed; + +/* pipes 3 and 4 are not used by the driver */ +#define P54U_PIPE_NUMBER 9 + +enum p54u_pipe_addr { + P54U_PIPE_DATA = 0x01, + P54U_PIPE_MGMT = 0x02, + P54U_PIPE_3 = 0x03, + P54U_PIPE_4 = 0x04, + P54U_PIPE_BRG = 0x0d, + P54U_PIPE_DEV = 0x0e, + P54U_PIPE_INT = 0x0f +}; + +struct p54u_rx_info { + struct urb *urb; + struct ieee80211_hw *dev; +}; + +enum p54u_hw_type { + P54U_INVALID_HW, + P54U_NET2280, + P54U_3887, + + /* keep last */ + __NUM_P54U_HWTYPES, +}; + +struct p54u_priv { + struct p54_common common; + struct usb_device *udev; + struct usb_interface *intf; + int (*upload_fw)(struct ieee80211_hw *dev); + + enum p54u_hw_type hw_type; + spinlock_t lock; + struct sk_buff_head rx_queue; + struct usb_anchor submitted; + const struct firmware *fw; + + /* asynchronous firmware callback */ + struct completion fw_wait_load; +}; + +#endif /* P54USB_H */ diff --git a/drivers/net/wireless/intersil/p54/txrx.c b/drivers/net/wireless/intersil/p54/txrx.c new file mode 100644 index 000000000..24e5ff9a9 --- /dev/null +++ b/drivers/net/wireless/intersil/p54/txrx.c @@ -0,0 +1,940 @@ +/* + * Common code for mac80211 Prism54 drivers + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * Based on: + * - the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * - stlc45xx driver + * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/export.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <asm/div64.h> + +#include <net/mac80211.h> + +#include "p54.h" +#include "lmac.h" + +#ifdef P54_MM_DEBUG +static void p54_dump_tx_queue(struct p54_common *priv) +{ + unsigned long flags; + struct ieee80211_tx_info *info; + struct p54_tx_info *range; + struct sk_buff *skb; + struct p54_hdr *hdr; + unsigned int i = 0; + u32 prev_addr; + u32 largest_hole = 0, free; + + spin_lock_irqsave(&priv->tx_queue.lock, flags); + wiphy_debug(priv->hw->wiphy, "/ --- tx queue dump (%d entries) ---\n", + skb_queue_len(&priv->tx_queue)); + + prev_addr = priv->rx_start; + skb_queue_walk(&priv->tx_queue, skb) { + info = IEEE80211_SKB_CB(skb); + range = (void *) info->rate_driver_data; + hdr = (void *) skb->data; + + free = range->start_addr - prev_addr; + wiphy_debug(priv->hw->wiphy, + "| [%02d] => [skb:%p skb_len:0x%04x " + "hdr:{flags:%02x len:%04x req_id:%04x type:%02x} " + "mem:{start:%04x end:%04x, free:%d}]\n", + i++, skb, skb->len, + le16_to_cpu(hdr->flags), le16_to_cpu(hdr->len), + le32_to_cpu(hdr->req_id), le16_to_cpu(hdr->type), + range->start_addr, range->end_addr, free); + + prev_addr = range->end_addr; + largest_hole = max(largest_hole, free); + } + free = priv->rx_end - prev_addr; + largest_hole = max(largest_hole, free); + wiphy_debug(priv->hw->wiphy, + "\\ --- [free: %d], largest free block: %d ---\n", + free, largest_hole); + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); +} +#endif /* P54_MM_DEBUG */ + +/* + * So, the firmware is somewhat stupid and doesn't know what places in its + * memory incoming data should go to. By poking around in the firmware, we + * can find some unused memory to upload our packets to. However, data that we + * want the card to TX needs to stay intact until the card has told us that + * it is done with it. This function finds empty places we can upload to and + * marks allocated areas as reserved if necessary. p54_find_and_unlink_skb or + * p54_free_skb frees allocated areas. + */ +static int p54_assign_address(struct p54_common *priv, struct sk_buff *skb) +{ + struct sk_buff *entry, *target_skb = NULL; + struct ieee80211_tx_info *info; + struct p54_tx_info *range; + struct p54_hdr *data = (void *) skb->data; + unsigned long flags; + u32 last_addr = priv->rx_start; + u32 target_addr = priv->rx_start; + u16 len = priv->headroom + skb->len + priv->tailroom + 3; + + info = IEEE80211_SKB_CB(skb); + range = (void *) info->rate_driver_data; + len = (range->extra_len + len) & ~0x3; + + spin_lock_irqsave(&priv->tx_queue.lock, flags); + if (unlikely(skb_queue_len(&priv->tx_queue) == 32)) { + /* + * The tx_queue is now really full. + * + * TODO: check if the device has crashed and reset it. + */ + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); + return -EBUSY; + } + + skb_queue_walk(&priv->tx_queue, entry) { + u32 hole_size; + info = IEEE80211_SKB_CB(entry); + range = (void *) info->rate_driver_data; + hole_size = range->start_addr - last_addr; + + if (!target_skb && hole_size >= len) { + target_skb = entry->prev; + hole_size -= len; + target_addr = last_addr; + break; + } + last_addr = range->end_addr; + } + if (unlikely(!target_skb)) { + if (priv->rx_end - last_addr >= len) { + target_skb = priv->tx_queue.prev; + if (!skb_queue_empty(&priv->tx_queue)) { + info = IEEE80211_SKB_CB(target_skb); + range = (void *)info->rate_driver_data; + target_addr = range->end_addr; + } + } else { + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); + return -ENOSPC; + } + } + + info = IEEE80211_SKB_CB(skb); + range = (void *) info->rate_driver_data; + range->start_addr = target_addr; + range->end_addr = target_addr + len; + data->req_id = cpu_to_le32(target_addr + priv->headroom); + if (IS_DATA_FRAME(skb) && + unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON)) + priv->beacon_req_id = data->req_id; + + __skb_queue_after(&priv->tx_queue, target_skb, skb); + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); + return 0; +} + +static void p54_tx_pending(struct p54_common *priv) +{ + struct sk_buff *skb; + int ret; + + skb = skb_dequeue(&priv->tx_pending); + if (unlikely(!skb)) + return ; + + ret = p54_assign_address(priv, skb); + if (unlikely(ret)) + skb_queue_head(&priv->tx_pending, skb); + else + priv->tx(priv->hw, skb); +} + +static void p54_wake_queues(struct p54_common *priv) +{ + unsigned long flags; + unsigned int i; + + if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) + return ; + + p54_tx_pending(priv); + + spin_lock_irqsave(&priv->tx_stats_lock, flags); + for (i = 0; i < priv->hw->queues; i++) { + if (priv->tx_stats[i + P54_QUEUE_DATA].len < + priv->tx_stats[i + P54_QUEUE_DATA].limit) + ieee80211_wake_queue(priv->hw, i); + } + spin_unlock_irqrestore(&priv->tx_stats_lock, flags); +} + +static int p54_tx_qos_accounting_alloc(struct p54_common *priv, + struct sk_buff *skb, + const u16 p54_queue) +{ + struct p54_tx_queue_stats *queue; + unsigned long flags; + + if (WARN_ON(p54_queue >= P54_QUEUE_NUM)) + return -EINVAL; + + queue = &priv->tx_stats[p54_queue]; + + spin_lock_irqsave(&priv->tx_stats_lock, flags); + if (unlikely(queue->len >= queue->limit && IS_QOS_QUEUE(p54_queue))) { + spin_unlock_irqrestore(&priv->tx_stats_lock, flags); + return -ENOSPC; + } + + queue->len++; + queue->count++; + + if (unlikely(queue->len == queue->limit && IS_QOS_QUEUE(p54_queue))) { + u16 ac_queue = p54_queue - P54_QUEUE_DATA; + ieee80211_stop_queue(priv->hw, ac_queue); + } + + spin_unlock_irqrestore(&priv->tx_stats_lock, flags); + return 0; +} + +static void p54_tx_qos_accounting_free(struct p54_common *priv, + struct sk_buff *skb) +{ + if (IS_DATA_FRAME(skb)) { + unsigned long flags; + + spin_lock_irqsave(&priv->tx_stats_lock, flags); + priv->tx_stats[GET_HW_QUEUE(skb)].len--; + spin_unlock_irqrestore(&priv->tx_stats_lock, flags); + + if (unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON)) { + if (priv->beacon_req_id == GET_REQ_ID(skb)) { + /* this is the active beacon set anymore */ + priv->beacon_req_id = 0; + } + complete(&priv->beacon_comp); + } + } + p54_wake_queues(priv); +} + +void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + struct p54_common *priv = dev->priv; + if (unlikely(!skb)) + return ; + + skb_unlink(skb, &priv->tx_queue); + p54_tx_qos_accounting_free(priv, skb); + ieee80211_free_txskb(dev, skb); +} +EXPORT_SYMBOL_GPL(p54_free_skb); + +static struct sk_buff *p54_find_and_unlink_skb(struct p54_common *priv, + const __le32 req_id) +{ + struct sk_buff *entry; + unsigned long flags; + + spin_lock_irqsave(&priv->tx_queue.lock, flags); + skb_queue_walk(&priv->tx_queue, entry) { + struct p54_hdr *hdr = (struct p54_hdr *) entry->data; + + if (hdr->req_id == req_id) { + __skb_unlink(entry, &priv->tx_queue); + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); + p54_tx_qos_accounting_free(priv, entry); + return entry; + } + } + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); + return NULL; +} + +void p54_tx(struct p54_common *priv, struct sk_buff *skb) +{ + skb_queue_tail(&priv->tx_pending, skb); + p54_tx_pending(priv); +} + +static int p54_rssi_to_dbm(struct p54_common *priv, int rssi) +{ + if (priv->rxhw != 5) { + return ((rssi * priv->cur_rssi->mul) / 64 + + priv->cur_rssi->add) / 4; + } else { + /* + * TODO: find the correct formula + */ + return rssi / 2 - 110; + } +} + +/* + * Even if the firmware is capable of dealing with incoming traffic, + * while dozing, we have to prepared in case mac80211 uses PS-POLL + * to retrieve outstanding frames from our AP. + * (see comment in net/mac80211/mlme.c @ line 1993) + */ +static void p54_pspoll_workaround(struct p54_common *priv, struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr = (void *) skb->data; + struct ieee80211_tim_ie *tim_ie; + u8 *tim; + u8 tim_len; + bool new_psm; + + /* only beacons have a TIM IE */ + if (!ieee80211_is_beacon(hdr->frame_control)) + return; + + if (!priv->aid) + return; + + /* only consider beacons from the associated BSSID */ + if (!ether_addr_equal_64bits(hdr->addr3, priv->bssid)) + return; + + tim = p54_find_ie(skb, WLAN_EID_TIM); + if (!tim) + return; + + tim_len = tim[1]; + tim_ie = (struct ieee80211_tim_ie *) &tim[2]; + + new_psm = ieee80211_check_tim(tim_ie, tim_len, priv->aid); + if (new_psm != priv->powersave_override) { + priv->powersave_override = new_psm; + p54_set_ps(priv); + } +} + +static int p54_rx_data(struct p54_common *priv, struct sk_buff *skb) +{ + struct p54_rx_data *hdr = (struct p54_rx_data *) skb->data; + struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb); + u16 freq = le16_to_cpu(hdr->freq); + size_t header_len = sizeof(*hdr); + u32 tsf32; + u8 rate = hdr->rate & 0xf; + + /* + * If the device is in a unspecified state we have to + * ignore all data frames. Else we could end up with a + * nasty crash. + */ + if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) + return 0; + + if (!(hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_IN_FCS_GOOD))) + return 0; + + if (hdr->decrypt_status == P54_DECRYPT_OK) + rx_status->flag |= RX_FLAG_DECRYPTED; + if ((hdr->decrypt_status == P54_DECRYPT_FAIL_MICHAEL) || + (hdr->decrypt_status == P54_DECRYPT_FAIL_TKIP)) + rx_status->flag |= RX_FLAG_MMIC_ERROR; + + rx_status->signal = p54_rssi_to_dbm(priv, hdr->rssi); + if (hdr->rate & 0x10) + rx_status->flag |= RX_FLAG_SHORTPRE; + if (priv->hw->conf.chandef.chan->band == IEEE80211_BAND_5GHZ) + rx_status->rate_idx = (rate < 4) ? 0 : rate - 4; + else + rx_status->rate_idx = rate; + + rx_status->freq = freq; + rx_status->band = priv->hw->conf.chandef.chan->band; + rx_status->antenna = hdr->antenna; + + tsf32 = le32_to_cpu(hdr->tsf32); + if (tsf32 < priv->tsf_low32) + priv->tsf_high32++; + rx_status->mactime = ((u64)priv->tsf_high32) << 32 | tsf32; + priv->tsf_low32 = tsf32; + + /* LMAC API Page 10/29 - s_lm_data_in - clock + * "usec accurate timestamp of hardware clock + * at end of frame (before OFDM SIFS EOF padding" + */ + rx_status->flag |= RX_FLAG_MACTIME_END; + + if (hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN)) + header_len += hdr->align[0]; + + skb_pull(skb, header_len); + skb_trim(skb, le16_to_cpu(hdr->len)); + if (unlikely(priv->hw->conf.flags & IEEE80211_CONF_PS)) + p54_pspoll_workaround(priv, skb); + + ieee80211_rx_irqsafe(priv->hw, skb); + + ieee80211_queue_delayed_work(priv->hw, &priv->work, + msecs_to_jiffies(P54_STATISTICS_UPDATE)); + + return -1; +} + +static void p54_rx_frame_sent(struct p54_common *priv, struct sk_buff *skb) +{ + struct p54_hdr *hdr = (struct p54_hdr *) skb->data; + struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data; + struct ieee80211_tx_info *info; + struct p54_hdr *entry_hdr; + struct p54_tx_data *entry_data; + struct sk_buff *entry; + unsigned int pad = 0, frame_len; + int count, idx; + + entry = p54_find_and_unlink_skb(priv, hdr->req_id); + if (unlikely(!entry)) + return ; + + frame_len = entry->len; + info = IEEE80211_SKB_CB(entry); + entry_hdr = (struct p54_hdr *) entry->data; + entry_data = (struct p54_tx_data *) entry_hdr->data; + priv->stats.dot11ACKFailureCount += payload->tries - 1; + + /* + * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are + * generated by the driver. Therefore tx_status is bogus + * and we don't want to confuse the mac80211 stack. + */ + if (unlikely(entry_data->hw_queue < P54_QUEUE_FWSCAN)) { + dev_kfree_skb_any(entry); + return ; + } + + /* + * Clear manually, ieee80211_tx_info_clear_status would + * clear the counts too and we need them. + */ + memset(&info->status.ack_signal, 0, + sizeof(struct ieee80211_tx_info) - + offsetof(struct ieee80211_tx_info, status.ack_signal)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, + status.ack_signal) != 20); + + if (entry_hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN)) + pad = entry_data->align[0]; + + /* walk through the rates array and adjust the counts */ + count = payload->tries; + for (idx = 0; idx < 4; idx++) { + if (count >= info->status.rates[idx].count) { + count -= info->status.rates[idx].count; + } else if (count > 0) { + info->status.rates[idx].count = count; + count = 0; + } else { + info->status.rates[idx].idx = -1; + info->status.rates[idx].count = 0; + } + } + + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && + !(payload->status & P54_TX_FAILED)) + info->flags |= IEEE80211_TX_STAT_ACK; + if (payload->status & P54_TX_PSM_CANCELLED) + info->flags |= IEEE80211_TX_STAT_TX_FILTERED; + info->status.ack_signal = p54_rssi_to_dbm(priv, + (int)payload->ack_rssi); + + /* Undo all changes to the frame. */ + switch (entry_data->key_type) { + case P54_CRYPTO_TKIPMICHAEL: { + u8 *iv = (u8 *)(entry_data->align + pad + + entry_data->crypt_offset); + + /* Restore the original TKIP IV. */ + iv[2] = iv[0]; + iv[0] = iv[1]; + iv[1] = (iv[0] | 0x20) & 0x7f; /* WEPSeed - 8.3.2.2 */ + + frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */ + break; + } + case P54_CRYPTO_AESCCMP: + frame_len -= 8; /* remove CCMP_MIC */ + break; + case P54_CRYPTO_WEP: + frame_len -= 4; /* remove WEP_ICV */ + break; + } + + skb_trim(entry, frame_len); + skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); + ieee80211_tx_status_irqsafe(priv->hw, entry); +} + +static void p54_rx_eeprom_readback(struct p54_common *priv, + struct sk_buff *skb) +{ + struct p54_hdr *hdr = (struct p54_hdr *) skb->data; + struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; + struct sk_buff *tmp; + + if (!priv->eeprom) + return ; + + if (priv->fw_var >= 0x509) { + memcpy(priv->eeprom, eeprom->v2.data, + le16_to_cpu(eeprom->v2.len)); + } else { + memcpy(priv->eeprom, eeprom->v1.data, + le16_to_cpu(eeprom->v1.len)); + } + + priv->eeprom = NULL; + tmp = p54_find_and_unlink_skb(priv, hdr->req_id); + dev_kfree_skb_any(tmp); + complete(&priv->eeprom_comp); +} + +static void p54_rx_stats(struct p54_common *priv, struct sk_buff *skb) +{ + struct p54_hdr *hdr = (struct p54_hdr *) skb->data; + struct p54_statistics *stats = (struct p54_statistics *) hdr->data; + struct sk_buff *tmp; + struct ieee80211_channel *chan; + unsigned int i, rssi, tx, cca, dtime, dtotal, dcca, dtx, drssi, unit; + u32 tsf32; + + if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) + return ; + + tsf32 = le32_to_cpu(stats->tsf32); + if (tsf32 < priv->tsf_low32) + priv->tsf_high32++; + priv->tsf_low32 = tsf32; + + priv->stats.dot11RTSFailureCount = le32_to_cpu(stats->rts_fail); + priv->stats.dot11RTSSuccessCount = le32_to_cpu(stats->rts_success); + priv->stats.dot11FCSErrorCount = le32_to_cpu(stats->rx_bad_fcs); + + priv->noise = p54_rssi_to_dbm(priv, le32_to_cpu(stats->noise)); + + /* + * STSW450X LMAC API page 26 - 3.8 Statistics + * "The exact measurement period can be derived from the + * timestamp member". + */ + dtime = tsf32 - priv->survey_raw.timestamp; + + /* + * STSW450X LMAC API page 26 - 3.8.1 Noise histogram + * The LMAC samples RSSI, CCA and transmit state at regular + * periods (typically 8 times per 1k [as in 1024] usec). + */ + cca = le32_to_cpu(stats->sample_cca); + tx = le32_to_cpu(stats->sample_tx); + rssi = 0; + for (i = 0; i < ARRAY_SIZE(stats->sample_noise); i++) + rssi += le32_to_cpu(stats->sample_noise[i]); + + dcca = cca - priv->survey_raw.cached_cca; + drssi = rssi - priv->survey_raw.cached_rssi; + dtx = tx - priv->survey_raw.cached_tx; + dtotal = dcca + drssi + dtx; + + /* + * update statistics when more than a second is over since the + * last call, or when a update is badly needed. + */ + if (dtotal && (priv->update_stats || dtime >= USEC_PER_SEC) && + dtime >= dtotal) { + priv->survey_raw.timestamp = tsf32; + priv->update_stats = false; + unit = dtime / dtotal; + + if (dcca) { + priv->survey_raw.cca += dcca * unit; + priv->survey_raw.cached_cca = cca; + } + if (dtx) { + priv->survey_raw.tx += dtx * unit; + priv->survey_raw.cached_tx = tx; + } + if (drssi) { + priv->survey_raw.rssi += drssi * unit; + priv->survey_raw.cached_rssi = rssi; + } + + /* 1024 usec / 8 times = 128 usec / time */ + if (!(priv->phy_ps || priv->phy_idle)) + priv->survey_raw.active += dtotal * unit; + else + priv->survey_raw.active += (dcca + dtx) * unit; + } + + chan = priv->curchan; + if (chan) { + struct survey_info *survey = &priv->survey[chan->hw_value]; + survey->noise = clamp(priv->noise, -128, 127); + survey->time = priv->survey_raw.active; + survey->time_tx = priv->survey_raw.tx; + survey->time_busy = priv->survey_raw.tx + + priv->survey_raw.cca; + do_div(survey->time, 1024); + do_div(survey->time_tx, 1024); + do_div(survey->time_busy, 1024); + } + + tmp = p54_find_and_unlink_skb(priv, hdr->req_id); + dev_kfree_skb_any(tmp); + complete(&priv->stat_comp); +} + +static void p54_rx_trap(struct p54_common *priv, struct sk_buff *skb) +{ + struct p54_hdr *hdr = (struct p54_hdr *) skb->data; + struct p54_trap *trap = (struct p54_trap *) hdr->data; + u16 event = le16_to_cpu(trap->event); + u16 freq = le16_to_cpu(trap->frequency); + + switch (event) { + case P54_TRAP_BEACON_TX: + break; + case P54_TRAP_RADAR: + wiphy_info(priv->hw->wiphy, "radar (freq:%d MHz)\n", freq); + break; + case P54_TRAP_NO_BEACON: + if (priv->vif) + ieee80211_beacon_loss(priv->vif); + break; + case P54_TRAP_SCAN: + break; + case P54_TRAP_TBTT: + break; + case P54_TRAP_TIMER: + break; + case P54_TRAP_FAA_RADIO_OFF: + wiphy_rfkill_set_hw_state(priv->hw->wiphy, true); + break; + case P54_TRAP_FAA_RADIO_ON: + wiphy_rfkill_set_hw_state(priv->hw->wiphy, false); + break; + default: + wiphy_info(priv->hw->wiphy, "received event:%x freq:%d\n", + event, freq); + break; + } +} + +static int p54_rx_control(struct p54_common *priv, struct sk_buff *skb) +{ + struct p54_hdr *hdr = (struct p54_hdr *) skb->data; + + switch (le16_to_cpu(hdr->type)) { + case P54_CONTROL_TYPE_TXDONE: + p54_rx_frame_sent(priv, skb); + break; + case P54_CONTROL_TYPE_TRAP: + p54_rx_trap(priv, skb); + break; + case P54_CONTROL_TYPE_BBP: + break; + case P54_CONTROL_TYPE_STAT_READBACK: + p54_rx_stats(priv, skb); + break; + case P54_CONTROL_TYPE_EEPROM_READBACK: + p54_rx_eeprom_readback(priv, skb); + break; + default: + wiphy_debug(priv->hw->wiphy, + "not handling 0x%02x type control frame\n", + le16_to_cpu(hdr->type)); + break; + } + return 0; +} + +/* returns zero if skb can be reused */ +int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + struct p54_common *priv = dev->priv; + u16 type = le16_to_cpu(*((__le16 *)skb->data)); + + if (type & P54_HDR_FLAG_CONTROL) + return p54_rx_control(priv, skb); + else + return p54_rx_data(priv, skb); +} +EXPORT_SYMBOL_GPL(p54_rx); + +static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb, + struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, + u8 *queue, u32 *extra_len, u16 *flags, u16 *aid, + bool *burst_possible) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + + if (ieee80211_is_data_qos(hdr->frame_control)) + *burst_possible = true; + else + *burst_possible = false; + + if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)) + *flags |= P54_HDR_FLAG_DATA_OUT_SEQNR; + + if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER) + *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL; + + if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT) + *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL; + + *queue = skb_get_queue_mapping(skb) + P54_QUEUE_DATA; + + switch (priv->mode) { + case NL80211_IFTYPE_MONITOR: + /* + * We have to set P54_HDR_FLAG_DATA_OUT_PROMISC for + * every frame in promiscuous/monitor mode. + * see STSW45x0C LMAC API - page 12. + */ + *aid = 0; + *flags |= P54_HDR_FLAG_DATA_OUT_PROMISC; + break; + case NL80211_IFTYPE_STATION: + *aid = 1; + break; + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { + *aid = 0; + *queue = P54_QUEUE_CAB; + return; + } + + if (unlikely(ieee80211_is_mgmt(hdr->frame_control))) { + if (ieee80211_is_probe_resp(hdr->frame_control)) { + *aid = 0; + *flags |= P54_HDR_FLAG_DATA_OUT_TIMESTAMP | + P54_HDR_FLAG_DATA_OUT_NOCANCEL; + return; + } else if (ieee80211_is_beacon(hdr->frame_control)) { + *aid = 0; + + if (info->flags & IEEE80211_TX_CTL_INJECTED) { + /* + * Injecting beacons on top of a AP is + * not a good idea... nevertheless, + * it should be doable. + */ + + return; + } + + *flags |= P54_HDR_FLAG_DATA_OUT_TIMESTAMP; + *queue = P54_QUEUE_BEACON; + *extra_len = IEEE80211_MAX_TIM_LEN; + return; + } + } + + if (sta) + *aid = sta->aid; + break; + } +} + +static u8 p54_convert_algo(u32 cipher) +{ + switch (cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + return P54_CRYPTO_WEP; + case WLAN_CIPHER_SUITE_TKIP: + return P54_CRYPTO_TKIPMICHAEL; + case WLAN_CIPHER_SUITE_CCMP: + return P54_CRYPTO_AESCCMP; + default: + return 0; + } +} + +void p54_tx_80211(struct ieee80211_hw *dev, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct p54_common *priv = dev->priv; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct p54_tx_info *p54info; + struct p54_hdr *hdr; + struct p54_tx_data *txhdr; + unsigned int padding, len, extra_len = 0; + int i, j, ridx; + u16 hdr_flags = 0, aid = 0; + u8 rate, queue = 0, crypt_offset = 0; + u8 cts_rate = 0x20; + u8 rc_flags; + u8 calculated_tries[4]; + u8 nrates = 0, nremaining = 8; + bool burst_allowed = false; + + p54_tx_80211_header(priv, skb, info, control->sta, &queue, &extra_len, + &hdr_flags, &aid, &burst_allowed); + + if (p54_tx_qos_accounting_alloc(priv, skb, queue)) { + ieee80211_free_txskb(dev, skb); + return; + } + + padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3; + len = skb->len; + + if (info->control.hw_key) { + crypt_offset = ieee80211_get_hdrlen_from_skb(skb); + if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { + u8 *iv = (u8 *)(skb->data + crypt_offset); + /* + * The firmware excepts that the IV has to have + * this special format + */ + iv[1] = iv[0]; + iv[0] = iv[2]; + iv[2] = 0; + } + } + + txhdr = (struct p54_tx_data *) skb_push(skb, sizeof(*txhdr) + padding); + hdr = (struct p54_hdr *) skb_push(skb, sizeof(*hdr)); + + if (padding) + hdr_flags |= P54_HDR_FLAG_DATA_ALIGN; + hdr->type = cpu_to_le16(aid); + hdr->rts_tries = info->control.rates[0].count; + + /* + * we register the rates in perfect order, and + * RTS/CTS won't happen on 5 GHz + */ + cts_rate = info->control.rts_cts_rate_idx; + + memset(&txhdr->rateset, 0, sizeof(txhdr->rateset)); + + /* see how many rates got used */ + for (i = 0; i < dev->max_rates; i++) { + if (info->control.rates[i].idx < 0) + break; + nrates++; + } + + /* limit tries to 8/nrates per rate */ + for (i = 0; i < nrates; i++) { + /* + * The magic expression here is equivalent to 8/nrates for + * all values that matter, but avoids division and jumps. + * Note that nrates can only take the values 1 through 4. + */ + calculated_tries[i] = min_t(int, ((15 >> nrates) | 1) + 1, + info->control.rates[i].count); + nremaining -= calculated_tries[i]; + } + + /* if there are tries left, distribute from back to front */ + for (i = nrates - 1; nremaining > 0 && i >= 0; i--) { + int tmp = info->control.rates[i].count - calculated_tries[i]; + + if (tmp <= 0) + continue; + /* RC requested more tries at this rate */ + + tmp = min_t(int, tmp, nremaining); + calculated_tries[i] += tmp; + nremaining -= tmp; + } + + ridx = 0; + for (i = 0; i < nrates && ridx < 8; i++) { + /* we register the rates in perfect order */ + rate = info->control.rates[i].idx; + if (info->band == IEEE80211_BAND_5GHZ) + rate += 4; + + /* store the count we actually calculated for TX status */ + info->control.rates[i].count = calculated_tries[i]; + + rc_flags = info->control.rates[i].flags; + if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) { + rate |= 0x10; + cts_rate |= 0x10; + } + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { + burst_allowed = false; + rate |= 0x40; + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { + rate |= 0x20; + burst_allowed = false; + } + for (j = 0; j < calculated_tries[i] && ridx < 8; j++) { + txhdr->rateset[ridx] = rate; + ridx++; + } + } + + if (burst_allowed) + hdr_flags |= P54_HDR_FLAG_DATA_OUT_BURST; + + /* TODO: enable bursting */ + hdr->flags = cpu_to_le16(hdr_flags); + hdr->tries = ridx; + txhdr->rts_rate_idx = 0; + if (info->control.hw_key) { + txhdr->key_type = p54_convert_algo(info->control.hw_key->cipher); + txhdr->key_len = min((u8)16, info->control.hw_key->keylen); + memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len); + if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { + /* reserve space for the MIC key */ + len += 8; + memcpy(skb_put(skb, 8), &(info->control.hw_key->key + [NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY]), 8); + } + /* reserve some space for ICV */ + len += info->control.hw_key->icv_len; + memset(skb_put(skb, info->control.hw_key->icv_len), 0, + info->control.hw_key->icv_len); + } else { + txhdr->key_type = 0; + txhdr->key_len = 0; + } + txhdr->crypt_offset = crypt_offset; + txhdr->hw_queue = queue; + txhdr->backlog = priv->tx_stats[queue].len - 1; + memset(txhdr->durations, 0, sizeof(txhdr->durations)); + txhdr->tx_antenna = 2 & priv->tx_diversity_mask; + if (priv->rxhw == 5) { + txhdr->longbow.cts_rate = cts_rate; + txhdr->longbow.output_power = cpu_to_le16(priv->output_power); + } else { + txhdr->normal.output_power = priv->output_power; + txhdr->normal.cts_rate = cts_rate; + } + if (padding) + txhdr->align[0] = padding; + + hdr->len = cpu_to_le16(len); + /* modifies skb->cb and with it info, so must be last! */ + p54info = (void *) info->rate_driver_data; + p54info->extra_len = extra_len; + + p54_tx(priv, skb); +} diff --git a/drivers/net/wireless/intersil/prism54/Makefile b/drivers/net/wireless/intersil/prism54/Makefile new file mode 100644 index 000000000..fad305c76 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/Makefile @@ -0,0 +1,8 @@ +# $Id: Makefile.k26,v 1.7 2004/01/30 16:24:00 ajfa Exp $ + +prism54-objs := islpci_eth.o islpci_mgt.o \ + isl_38xx.o isl_ioctl.o islpci_dev.o \ + islpci_hotplug.o oid_mgt.o + +obj-$(CONFIG_PRISM54) += prism54.o + diff --git a/drivers/net/wireless/intersil/prism54/isl_38xx.c b/drivers/net/wireless/intersil/prism54/isl_38xx.c new file mode 100644 index 000000000..333c1a2f8 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/isl_38xx.c @@ -0,0 +1,255 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2003-2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>_ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/delay.h> + +#include <asm/uaccess.h> +#include <asm/io.h> + +#include "prismcompat.h" +#include "isl_38xx.h" +#include "islpci_dev.h" +#include "islpci_mgt.h" + +/****************************************************************************** + Device Interface & Control functions +******************************************************************************/ + +/** + * isl38xx_disable_interrupts - disable all interrupts + * @device: pci memory base address + * + * Instructs the device to disable all interrupt reporting by asserting + * the IRQ line. New events may still show up in the interrupt identification + * register located at offset %ISL38XX_INT_IDENT_REG. + */ +void +isl38xx_disable_interrupts(void __iomem *device) +{ + isl38xx_w32_flush(device, 0x00000000, ISL38XX_INT_EN_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +void +isl38xx_handle_sleep_request(isl38xx_control_block *control_block, + int *powerstate, void __iomem *device_base) +{ + /* device requests to go into sleep mode + * check whether the transmit queues for data and management are empty */ + if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ)) + /* data tx queue not empty */ + return; + + if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ)) + /* management tx queue not empty */ + return; + + /* check also whether received frames are pending */ + if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_DATA_LQ)) + /* data rx queue not empty */ + return; + + if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_MGMTQ)) + /* management rx queue not empty */ + return; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Device going to sleep mode\n"); +#endif + + /* all queues are empty, allow the device to go into sleep mode */ + *powerstate = ISL38XX_PSM_POWERSAVE_STATE; + + /* assert the Sleep interrupt in the Device Interrupt Register */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_SLEEP, + ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +void +isl38xx_handle_wakeup(isl38xx_control_block *control_block, + int *powerstate, void __iomem *device_base) +{ + /* device is in active state, update the powerstate flag */ + *powerstate = ISL38XX_PSM_ACTIVE_STATE; + + /* now check whether there are frames pending for the card */ + if (!isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ) + && !isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ)) + return; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_ANYTHING, "Wake up handler trigger the device\n"); +#endif + + /* either data or management transmit queue has a frame pending + * trigger the device by setting the Update bit in the Device Int reg */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE, + ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +void +isl38xx_trigger_device(int asleep, void __iomem *device_base) +{ + u32 reg; + +#if VERBOSE > SHOW_ERROR_MESSAGES + u32 counter = 0; + struct timeval current_time; + DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n"); +#endif + + /* check whether the device is in power save mode */ + if (asleep) { + /* device is in powersave, trigger the device for wakeup */ +#if VERBOSE > SHOW_ERROR_MESSAGES + do_gettimeofday(¤t_time); + DEBUG(SHOW_TRACING, "%08li.%08li Device wakeup triggered\n", + current_time.tv_sec, (long)current_time.tv_usec); + + DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n", + current_time.tv_sec, (long)current_time.tv_usec, + readl(device_base + ISL38XX_CTRL_STAT_REG)); +#endif + + reg = readl(device_base + ISL38XX_INT_IDENT_REG); + if (reg == 0xabadface) { +#if VERBOSE > SHOW_ERROR_MESSAGES + do_gettimeofday(¤t_time); + DEBUG(SHOW_TRACING, + "%08li.%08li Device register abadface\n", + current_time.tv_sec, (long)current_time.tv_usec); +#endif + /* read the Device Status Register until Sleepmode bit is set */ + while (reg = readl(device_base + ISL38XX_CTRL_STAT_REG), + (reg & ISL38XX_CTRL_STAT_SLEEPMODE) == 0) { + udelay(ISL38XX_WRITEIO_DELAY); +#if VERBOSE > SHOW_ERROR_MESSAGES + counter++; +#endif + } + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "%08li.%08li Device register read %08x\n", + current_time.tv_sec, (long)current_time.tv_usec, + readl(device_base + ISL38XX_CTRL_STAT_REG)); + do_gettimeofday(¤t_time); + DEBUG(SHOW_TRACING, + "%08li.%08li Device asleep counter %i\n", + current_time.tv_sec, (long)current_time.tv_usec, + counter); +#endif + } + /* assert the Wakeup interrupt in the Device Interrupt Register */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP, + ISL38XX_DEV_INT_REG); + +#if VERBOSE > SHOW_ERROR_MESSAGES + udelay(ISL38XX_WRITEIO_DELAY); + + /* perform another read on the Device Status Register */ + reg = readl(device_base + ISL38XX_CTRL_STAT_REG); + do_gettimeofday(¤t_time); + DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n", + current_time.tv_sec, (long)current_time.tv_usec, reg); +#endif + } else { + /* device is (still) awake */ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Device is in active state\n"); +#endif + /* trigger the device by setting the Update bit in the Device Int reg */ + + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE, + ISL38XX_DEV_INT_REG); + } +} + +void +isl38xx_interface_reset(void __iomem *device_base, dma_addr_t host_address) +{ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "isl38xx_interface_reset\n"); +#endif + + /* load the address of the control block in the device */ + isl38xx_w32_flush(device_base, host_address, ISL38XX_CTRL_BLK_BASE_REG); + udelay(ISL38XX_WRITEIO_DELAY); + + /* set the reset bit in the Device Interrupt Register */ + isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_RESET, ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); + + /* enable the interrupt for detecting initialization */ + + /* Note: Do not enable other interrupts here. We want the + * device to have come up first 100% before allowing any other + * interrupts. */ + isl38xx_w32_flush(device_base, ISL38XX_INT_IDENT_INIT, ISL38XX_INT_EN_REG); + udelay(ISL38XX_WRITEIO_DELAY); /* allow complete full reset */ +} + +void +isl38xx_enable_common_interrupts(void __iomem *device_base) +{ + u32 reg; + + reg = ISL38XX_INT_IDENT_UPDATE | ISL38XX_INT_IDENT_SLEEP | + ISL38XX_INT_IDENT_WAKEUP; + isl38xx_w32_flush(device_base, reg, ISL38XX_INT_EN_REG); + udelay(ISL38XX_WRITEIO_DELAY); +} + +int +isl38xx_in_queue(isl38xx_control_block *cb, int queue) +{ + const s32 delta = (le32_to_cpu(cb->driver_curr_frag[queue]) - + le32_to_cpu(cb->device_curr_frag[queue])); + + /* determine the amount of fragments in the queue depending on the type + * of the queue, either transmit or receive */ + + BUG_ON(delta < 0); /* driver ptr must be ahead of device ptr */ + + switch (queue) { + /* send queues */ + case ISL38XX_CB_TX_MGMTQ: + BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE); + + case ISL38XX_CB_TX_DATA_LQ: + case ISL38XX_CB_TX_DATA_HQ: + BUG_ON(delta > ISL38XX_CB_TX_QSIZE); + return delta; + + /* receive queues */ + case ISL38XX_CB_RX_MGMTQ: + BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE); + return ISL38XX_CB_MGMT_QSIZE - delta; + + case ISL38XX_CB_RX_DATA_LQ: + case ISL38XX_CB_RX_DATA_HQ: + BUG_ON(delta > ISL38XX_CB_RX_QSIZE); + return ISL38XX_CB_RX_QSIZE - delta; + } + BUG(); + return 0; +} diff --git a/drivers/net/wireless/intersil/prism54/isl_38xx.h b/drivers/net/wireless/intersil/prism54/isl_38xx.h new file mode 100644 index 000000000..547ab8856 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/isl_38xx.h @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef _ISL_38XX_H +#define _ISL_38XX_H + +#include <asm/io.h> +#include <asm/byteorder.h> + +#define ISL38XX_CB_RX_QSIZE 8 +#define ISL38XX_CB_TX_QSIZE 32 + +/* ISL38XX Access Point Specific definitions */ +#define ISL38XX_MAX_WDS_LINKS 8 + +/* ISL38xx Client Specific definitions */ +#define ISL38XX_PSM_ACTIVE_STATE 0 +#define ISL38XX_PSM_POWERSAVE_STATE 1 + +/* ISL38XX Host Interface Definitions */ +#define ISL38XX_PCI_MEM_SIZE 0x02000 +#define ISL38XX_MEMORY_WINDOW_SIZE 0x01000 +#define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000 +#define ISL38XX_WRITEIO_DELAY 10 /* in us */ +#define ISL38XX_RESET_DELAY 50 /* in ms */ +#define ISL38XX_WAIT_CYCLE 10 /* in 10ms */ +#define ISL38XX_MAX_WAIT_CYCLES 10 + +/* PCI Memory Area */ +#define ISL38XX_HARDWARE_REG 0x0000 +#define ISL38XX_CARDBUS_CIS 0x0800 +#define ISL38XX_DIRECT_MEM_WIN 0x1000 + +/* Hardware registers */ +#define ISL38XX_DEV_INT_REG 0x0000 +#define ISL38XX_INT_IDENT_REG 0x0010 +#define ISL38XX_INT_ACK_REG 0x0014 +#define ISL38XX_INT_EN_REG 0x0018 +#define ISL38XX_GEN_PURP_COM_REG_1 0x0020 +#define ISL38XX_GEN_PURP_COM_REG_2 0x0024 +#define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1 +#define ISL38XX_DIR_MEM_BASE_REG 0x0030 +#define ISL38XX_CTRL_STAT_REG 0x0078 + +/* High end mobos queue up pci writes, the following + * is used to "read" from after a write to force flush */ +#define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG + +/** + * isl38xx_w32_flush - PCI iomem write helper + * @base: (host) memory base address of the device + * @val: 32bit value (host order) to write + * @offset: byte offset into @base to write value to + * + * This helper takes care of writing a 32bit datum to the + * specified offset into the device's pci memory space, and making sure + * the pci memory buffers get flushed by performing one harmless read + * from the %ISL38XX_PCI_POSTING_FLUSH offset. + */ +static inline void +isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset) +{ + writel(val, base + offset); + (void) readl(base + ISL38XX_PCI_POSTING_FLUSH); +} + +/* Device Interrupt register bits */ +#define ISL38XX_DEV_INT_RESET 0x0001 +#define ISL38XX_DEV_INT_UPDATE 0x0002 +#define ISL38XX_DEV_INT_WAKEUP 0x0008 +#define ISL38XX_DEV_INT_SLEEP 0x0010 + +/* Interrupt Identification/Acknowledge/Enable register bits */ +#define ISL38XX_INT_IDENT_UPDATE 0x0002 +#define ISL38XX_INT_IDENT_INIT 0x0004 +#define ISL38XX_INT_IDENT_WAKEUP 0x0008 +#define ISL38XX_INT_IDENT_SLEEP 0x0010 +#define ISL38XX_INT_SOURCES 0x001E + +/* Control/Status register bits */ +/* Looks like there are other meaningful bits + 0x20004400 seen in normal operation, + 0x200044db at 'timeout waiting for mgmt response' +*/ +#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200 +#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000 +#define ISL38XX_CTRL_STAT_RESET 0x10000000 +#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000 +#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000 +#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000 + +/* Control Block definitions */ +#define ISL38XX_CB_RX_DATA_LQ 0 +#define ISL38XX_CB_TX_DATA_LQ 1 +#define ISL38XX_CB_RX_DATA_HQ 2 +#define ISL38XX_CB_TX_DATA_HQ 3 +#define ISL38XX_CB_RX_MGMTQ 4 +#define ISL38XX_CB_TX_MGMTQ 5 +#define ISL38XX_CB_QCOUNT 6 +#define ISL38XX_CB_MGMT_QSIZE 4 +#define ISL38XX_MIN_QTHRESHOLD 4 /* fragments */ + +/* Memory Manager definitions */ +#define MGMT_FRAME_SIZE 1500 /* >= size struct obj_bsslist */ +#define MGMT_TX_FRAME_COUNT 24 /* max 4 + spare 4 + 8 init */ +#define MGMT_RX_FRAME_COUNT 24 /* 4*4 + spare 8 */ +#define MGMT_FRAME_COUNT (MGMT_TX_FRAME_COUNT + MGMT_RX_FRAME_COUNT) +#define CONTROL_BLOCK_SIZE 1024 /* should be enough */ +#define PSM_FRAME_SIZE 1536 +#define PSM_MINIMAL_STATION_COUNT 64 +#define PSM_FRAME_COUNT PSM_MINIMAL_STATION_COUNT +#define PSM_BUFFER_SIZE PSM_FRAME_SIZE * PSM_FRAME_COUNT +#define MAX_TRAP_RX_QUEUE 4 +#define HOST_MEM_BLOCK CONTROL_BLOCK_SIZE + PSM_BUFFER_SIZE + +/* Fragment package definitions */ +#define FRAGMENT_FLAG_MF 0x0001 +#define MAX_FRAGMENT_SIZE 1536 + +/* In monitor mode frames have a header. I don't know exactly how big those + * frame can be but I've never seen any frame bigger than 1584... : + */ +#define MAX_FRAGMENT_SIZE_RX 1600 + +typedef struct { + __le32 address; /* physical address on host */ + __le16 size; /* packet size */ + __le16 flags; /* set of bit-wise flags */ +} isl38xx_fragment; + +struct isl38xx_cb { + __le32 driver_curr_frag[ISL38XX_CB_QCOUNT]; + __le32 device_curr_frag[ISL38XX_CB_QCOUNT]; + isl38xx_fragment rx_data_low[ISL38XX_CB_RX_QSIZE]; + isl38xx_fragment tx_data_low[ISL38XX_CB_TX_QSIZE]; + isl38xx_fragment rx_data_high[ISL38XX_CB_RX_QSIZE]; + isl38xx_fragment tx_data_high[ISL38XX_CB_TX_QSIZE]; + isl38xx_fragment rx_data_mgmt[ISL38XX_CB_MGMT_QSIZE]; + isl38xx_fragment tx_data_mgmt[ISL38XX_CB_MGMT_QSIZE]; +}; + +typedef struct isl38xx_cb isl38xx_control_block; + +/* determine number of entries currently in queue */ +int isl38xx_in_queue(isl38xx_control_block *cb, int queue); + +void isl38xx_disable_interrupts(void __iomem *); +void isl38xx_enable_common_interrupts(void __iomem *); + +void isl38xx_handle_sleep_request(isl38xx_control_block *, int *, + void __iomem *); +void isl38xx_handle_wakeup(isl38xx_control_block *, int *, void __iomem *); +void isl38xx_trigger_device(int, void __iomem *); +void isl38xx_interface_reset(void __iomem *, dma_addr_t); + +#endif /* _ISL_38XX_H */ diff --git a/drivers/net/wireless/intersil/prism54/isl_ioctl.c b/drivers/net/wireless/intersil/prism54/isl_ioctl.c new file mode 100644 index 000000000..48e8a978a --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/isl_ioctl.c @@ -0,0 +1,2910 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * (C) 2003,2004 Aurelien Alleaume <slts@free.fr> + * (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> + * (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <linux/capability.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/if_arp.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/etherdevice.h> + +#include <asm/uaccess.h> + +#include "prismcompat.h" +#include "isl_ioctl.h" +#include "islpci_mgt.h" +#include "isl_oid.h" /* additional types and defs for isl38xx fw */ +#include "oid_mgt.h" + +#include <net/iw_handler.h> /* New driver API */ + +#define KEY_SIZE_WEP104 13 /* 104/128-bit WEP keys */ +#define KEY_SIZE_WEP40 5 /* 40/64-bit WEP keys */ +/* KEY_SIZE_TKIP should match isl_oid.h, struct obj_key.key[] size */ +#define KEY_SIZE_TKIP 32 /* TKIP keys */ + +static void prism54_wpa_bss_ie_add(islpci_private *priv, u8 *bssid, + u8 *wpa_ie, size_t wpa_ie_len); +static size_t prism54_wpa_bss_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie); +static int prism54_set_wpa(struct net_device *, struct iw_request_info *, + __u32 *, char *); + +/* In 500 kbps */ +static const unsigned char scan_rate_list[] = { 2, 4, 11, 22, + 12, 18, 24, 36, + 48, 72, 96, 108 }; + +/** + * prism54_mib_mode_helper - MIB change mode helper function + * @mib: the &struct islpci_mib object to modify + * @iw_mode: new mode (%IW_MODE_*) + * + * This is a helper function, hence it does not lock. Make sure + * caller deals with locking *if* necessary. This function sets the + * mode-dependent mib values and does the mapping of the Linux + * Wireless API modes to Device firmware modes. It also checks for + * correct valid Linux wireless modes. + */ +static int +prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode) +{ + u32 config = INL_CONFIG_MANUALRUN; + u32 mode, bsstype; + + /* For now, just catch early the Repeater and Secondary modes here */ + if (iw_mode == IW_MODE_REPEAT || iw_mode == IW_MODE_SECOND) { + printk(KERN_DEBUG + "%s(): Sorry, Repeater mode and Secondary mode " + "are not yet supported by this driver.\n", __func__); + return -EINVAL; + } + + priv->iw_mode = iw_mode; + + switch (iw_mode) { + case IW_MODE_AUTO: + mode = INL_MODE_CLIENT; + bsstype = DOT11_BSSTYPE_ANY; + break; + case IW_MODE_ADHOC: + mode = INL_MODE_CLIENT; + bsstype = DOT11_BSSTYPE_IBSS; + break; + case IW_MODE_INFRA: + mode = INL_MODE_CLIENT; + bsstype = DOT11_BSSTYPE_INFRA; + break; + case IW_MODE_MASTER: + mode = INL_MODE_AP; + bsstype = DOT11_BSSTYPE_INFRA; + break; + case IW_MODE_MONITOR: + mode = INL_MODE_PROMISCUOUS; + bsstype = DOT11_BSSTYPE_ANY; + config |= INL_CONFIG_RXANNEX; + break; + default: + return -EINVAL; + } + + if (init_wds) + config |= INL_CONFIG_WDS; + mgt_set(priv, DOT11_OID_BSSTYPE, &bsstype); + mgt_set(priv, OID_INL_CONFIG, &config); + mgt_set(priv, OID_INL_MODE, &mode); + + return 0; +} + +/** + * prism54_mib_init - fill MIB cache with defaults + * + * this function initializes the struct given as @mib with defaults, + * of which many are retrieved from the global module parameter + * variables. + */ + +void +prism54_mib_init(islpci_private *priv) +{ + u32 channel, authen, wep, filter, dot1x, mlme, conformance, power, mode; + struct obj_buffer psm_buffer = { + .size = PSM_BUFFER_SIZE, + .addr = priv->device_psm_buffer + }; + + channel = CARD_DEFAULT_CHANNEL; + authen = CARD_DEFAULT_AUTHEN; + wep = CARD_DEFAULT_WEP; + filter = CARD_DEFAULT_FILTER; /* (0) Do not filter un-encrypted data */ + dot1x = CARD_DEFAULT_DOT1X; + mlme = CARD_DEFAULT_MLME_MODE; + conformance = CARD_DEFAULT_CONFORMANCE; + power = 127; + mode = CARD_DEFAULT_IW_MODE; + + mgt_set(priv, DOT11_OID_CHANNEL, &channel); + mgt_set(priv, DOT11_OID_AUTHENABLE, &authen); + mgt_set(priv, DOT11_OID_PRIVACYINVOKED, &wep); + mgt_set(priv, DOT11_OID_PSMBUFFER, &psm_buffer); + mgt_set(priv, DOT11_OID_EXUNENCRYPTED, &filter); + mgt_set(priv, DOT11_OID_DOT1XENABLE, &dot1x); + mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlme); + mgt_set(priv, OID_INL_DOT11D_CONFORMANCE, &conformance); + mgt_set(priv, OID_INL_OUTPUTPOWER, &power); + + /* This sets all of the mode-dependent values */ + prism54_mib_mode_helper(priv, mode); +} + +/* this will be executed outside of atomic context thanks to + * schedule_work(), thus we can as well use sleeping semaphore + * locking */ +void +prism54_update_stats(struct work_struct *work) +{ + islpci_private *priv = container_of(work, islpci_private, stats_work); + char *data; + int j; + struct obj_bss bss, *bss2; + union oid_res_t r; + + mutex_lock(&priv->stats_lock); + +/* Noise floor. + * I'm not sure if the unit is dBm. + * Note : If we are not connected, this value seems to be irrelevant. */ + + mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r); + priv->local_iwstatistics.qual.noise = r.u; + +/* Get the rssi of the link. To do this we need to retrieve a bss. */ + + /* First get the MAC address of the AP we are associated with. */ + mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r); + data = r.ptr; + + /* copy this MAC to the bss */ + memcpy(bss.address, data, ETH_ALEN); + kfree(data); + + /* now ask for the corresponding bss */ + j = mgt_get_request(priv, DOT11_OID_BSSFIND, 0, (void *) &bss, &r); + bss2 = r.ptr; + /* report the rssi and use it to calculate + * link quality through a signal-noise + * ratio */ + priv->local_iwstatistics.qual.level = bss2->rssi; + priv->local_iwstatistics.qual.qual = + bss2->rssi - priv->iwstatistics.qual.noise; + + kfree(bss2); + + /* report that the stats are new */ + priv->local_iwstatistics.qual.updated = 0x7; + +/* Rx : unable to decrypt the MPDU */ + mgt_get_request(priv, DOT11_OID_PRIVRXFAILED, 0, NULL, &r); + priv->local_iwstatistics.discard.code = r.u; + +/* Tx : Max MAC retries num reached */ + mgt_get_request(priv, DOT11_OID_MPDUTXFAILED, 0, NULL, &r); + priv->local_iwstatistics.discard.retries = r.u; + + mutex_unlock(&priv->stats_lock); +} + +struct iw_statistics * +prism54_get_wireless_stats(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + + /* If the stats are being updated return old data */ + if (mutex_trylock(&priv->stats_lock)) { + memcpy(&priv->iwstatistics, &priv->local_iwstatistics, + sizeof (struct iw_statistics)); + /* They won't be marked updated for the next time */ + priv->local_iwstatistics.qual.updated = 0; + mutex_unlock(&priv->stats_lock); + } else + priv->iwstatistics.qual.updated = 0; + + /* Update our wireless stats, but do not schedule to often + * (max 1 HZ) */ + if ((priv->stats_timestamp == 0) || + time_after(jiffies, priv->stats_timestamp + 1 * HZ)) { + schedule_work(&priv->stats_work); + priv->stats_timestamp = jiffies; + } + + return &priv->iwstatistics; +} + +static int +prism54_commit(struct net_device *ndev, struct iw_request_info *info, + char *cwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + /* simply re-set the last set SSID, this should commit most stuff */ + + /* Commit in Monitor mode is not necessary, also setting essid + * in Monitor mode does not make sense and isn't allowed for this + * device's firmware */ + if (priv->iw_mode != IW_MODE_MONITOR) + return mgt_set_request(priv, DOT11_OID_SSID, 0, NULL); + return 0; +} + +static int +prism54_get_name(struct net_device *ndev, struct iw_request_info *info, + char *cwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + char *capabilities; + union oid_res_t r; + int rvalue; + + if (islpci_get_state(priv) < PRV_STATE_INIT) { + strncpy(cwrq, "NOT READY!", IFNAMSIZ); + return 0; + } + rvalue = mgt_get_request(priv, OID_INL_PHYCAPABILITIES, 0, NULL, &r); + + switch (r.u) { + case INL_PHYCAP_5000MHZ: + capabilities = "IEEE 802.11a/b/g"; + break; + case INL_PHYCAP_FAA: + capabilities = "IEEE 802.11b/g - FAA Support"; + break; + case INL_PHYCAP_2400MHZ: + default: + capabilities = "IEEE 802.11b/g"; /* Default */ + break; + } + strncpy(cwrq, capabilities, IFNAMSIZ); + return rvalue; +} + +static int +prism54_set_freq(struct net_device *ndev, struct iw_request_info *info, + struct iw_freq *fwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + int rvalue; + u32 c; + + if (fwrq->m < 1000) + /* we have a channel number */ + c = fwrq->m; + else + c = (fwrq->e == 1) ? channel_of_freq(fwrq->m / 100000) : 0; + + rvalue = c ? mgt_set_request(priv, DOT11_OID_CHANNEL, 0, &c) : -EINVAL; + + /* Call commit handler */ + return (rvalue ? rvalue : -EINPROGRESS); +} + +static int +prism54_get_freq(struct net_device *ndev, struct iw_request_info *info, + struct iw_freq *fwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, DOT11_OID_CHANNEL, 0, NULL, &r); + fwrq->i = r.u; + rvalue |= mgt_get_request(priv, DOT11_OID_FREQUENCY, 0, NULL, &r); + fwrq->m = r.u; + fwrq->e = 3; + + return rvalue; +} + +static int +prism54_set_mode(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + u32 mlmeautolevel = CARD_DEFAULT_MLME_MODE; + + /* Let's see if the user passed a valid Linux Wireless mode */ + if (*uwrq > IW_MODE_MONITOR || *uwrq < IW_MODE_AUTO) { + printk(KERN_DEBUG + "%s: %s() You passed a non-valid init_mode.\n", + priv->ndev->name, __func__); + return -EINVAL; + } + + down_write(&priv->mib_sem); + + if (prism54_mib_mode_helper(priv, *uwrq)) { + up_write(&priv->mib_sem); + return -EOPNOTSUPP; + } + + /* the ACL code needs an intermediate mlmeautolevel. The wpa stuff an + * extended one. + */ + if ((*uwrq == IW_MODE_MASTER) && (priv->acl.policy != MAC_POLICY_OPEN)) + mlmeautolevel = DOT11_MLME_INTERMEDIATE; + if (priv->wpa) + mlmeautolevel = DOT11_MLME_EXTENDED; + + mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel); + + if (mgt_commit(priv)) { + up_write(&priv->mib_sem); + return -EIO; + } + priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) + ? priv->monitor_type : ARPHRD_ETHER; + up_write(&priv->mib_sem); + + return 0; +} + +/* Use mib cache */ +static int +prism54_get_mode(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + BUG_ON((priv->iw_mode < IW_MODE_AUTO) || (priv->iw_mode > + IW_MODE_MONITOR)); + *uwrq = priv->iw_mode; + + return 0; +} + +/* we use DOT11_OID_EDTHRESHOLD. From what I guess the card will not try to + * emit data if (sensitivity > rssi - noise) (in dBm). + * prism54_set_sens does not seem to work. + */ + +static int +prism54_set_sens(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + u32 sens; + + /* by default the card sets this to 20. */ + sens = vwrq->disabled ? 20 : vwrq->value; + + return mgt_set_request(priv, DOT11_OID_EDTHRESHOLD, 0, &sens); +} + +static int +prism54_get_sens(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, DOT11_OID_EDTHRESHOLD, 0, NULL, &r); + + vwrq->value = r.u; + vwrq->disabled = (vwrq->value == 0); + vwrq->fixed = 1; + + return rvalue; +} + +static int +prism54_get_range(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + struct iw_range *range = (struct iw_range *) extra; + islpci_private *priv = netdev_priv(ndev); + u8 *data; + int i, m, rvalue; + struct obj_frequencies *freq; + union oid_res_t r; + + memset(range, 0, sizeof (struct iw_range)); + dwrq->length = sizeof (struct iw_range); + + /* set the wireless extension version number */ + range->we_version_source = SUPPORTED_WIRELESS_EXT; + range->we_version_compiled = WIRELESS_EXT; + + /* Now the encoding capabilities */ + range->num_encoding_sizes = 3; + /* 64(40) bits WEP */ + range->encoding_size[0] = 5; + /* 128(104) bits WEP */ + range->encoding_size[1] = 13; + /* 256 bits for WPA-PSK */ + range->encoding_size[2] = 32; + /* 4 keys are allowed */ + range->max_encoding_tokens = 4; + + /* we don't know the quality range... */ + range->max_qual.level = 0; + range->max_qual.noise = 0; + range->max_qual.qual = 0; + /* these value describe an average quality. Needs more tweaking... */ + range->avg_qual.level = -80; /* -80 dBm */ + range->avg_qual.noise = 0; /* don't know what to put here */ + range->avg_qual.qual = 0; + + range->sensitivity = 200; + + /* retry limit capabilities */ + range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; + range->retry_flags = IW_RETRY_LIMIT; + range->r_time_flags = IW_RETRY_LIFETIME; + + /* I don't know the range. Put stupid things here */ + range->min_retry = 1; + range->max_retry = 65535; + range->min_r_time = 1024; + range->max_r_time = 65535 * 1024; + + /* txpower is supported in dBm's */ + range->txpower_capa = IW_TXPOW_DBM; + + /* Event capability (kernel + driver) */ + range->event_capa[0] = (IW_EVENT_CAPA_K_0 | + IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | + IW_EVENT_CAPA_MASK(SIOCGIWAP)); + range->event_capa[1] = IW_EVENT_CAPA_K_1; + range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVCUSTOM); + + range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 | + IW_ENC_CAPA_CIPHER_TKIP; + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return 0; + + /* Request the device for the supported frequencies + * not really relevant since some devices will report the 5 GHz band + * frequencies even if they don't support them. + */ + rvalue = + mgt_get_request(priv, DOT11_OID_SUPPORTEDFREQUENCIES, 0, NULL, &r); + freq = r.ptr; + + range->num_channels = freq->nr; + range->num_frequency = freq->nr; + + m = min(IW_MAX_FREQUENCIES, (int) freq->nr); + for (i = 0; i < m; i++) { + range->freq[i].m = freq->mhz[i]; + range->freq[i].e = 6; + range->freq[i].i = channel_of_freq(freq->mhz[i]); + } + kfree(freq); + + rvalue |= mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r); + data = r.ptr; + + /* We got an array of char. It is NULL terminated. */ + i = 0; + while ((i < IW_MAX_BITRATES) && (*data != 0)) { + /* the result must be in bps. The card gives us 500Kbps */ + range->bitrate[i] = *data * 500000; + i++; + data++; + } + range->num_bitrates = i; + kfree(r.ptr); + + return rvalue; +} + +/* Set AP address*/ + +static int +prism54_set_wap(struct net_device *ndev, struct iw_request_info *info, + struct sockaddr *awrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + char bssid[6]; + int rvalue; + + if (awrq->sa_family != ARPHRD_ETHER) + return -EINVAL; + + /* prepare the structure for the set object */ + memcpy(&bssid[0], awrq->sa_data, ETH_ALEN); + + /* set the bssid -- does this make sense when in AP mode? */ + rvalue = mgt_set_request(priv, DOT11_OID_BSSID, 0, &bssid); + + return (rvalue ? rvalue : -EINPROGRESS); /* Call commit handler */ +} + +/* get AP address*/ + +static int +prism54_get_wap(struct net_device *ndev, struct iw_request_info *info, + struct sockaddr *awrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r); + memcpy(awrq->sa_data, r.ptr, ETH_ALEN); + awrq->sa_family = ARPHRD_ETHER; + kfree(r.ptr); + + return rvalue; +} + +static int +prism54_set_scan(struct net_device *dev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + /* hehe the device does this automagicaly */ + return 0; +} + +/* a little helper that will translate our data into a card independent + * format that the Wireless Tools will understand. This was inspired by + * the "Aironet driver for 4500 and 4800 series cards" (GPL) + */ + +static char * +prism54_translate_bss(struct net_device *ndev, struct iw_request_info *info, + char *current_ev, char *end_buf, struct obj_bss *bss, + char noise) +{ + struct iw_event iwe; /* Temporary buffer */ + short cap; + islpci_private *priv = netdev_priv(ndev); + u8 wpa_ie[MAX_WPA_IE_LEN]; + size_t wpa_ie_len; + + /* The first entry must be the MAC address */ + memcpy(iwe.u.ap_addr.sa_data, bss->address, ETH_ALEN); + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + iwe.cmd = SIOCGIWAP; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); + + /* The following entries will be displayed in the same order we give them */ + + /* The ESSID. */ + iwe.u.data.length = bss->ssid.length; + iwe.u.data.flags = 1; + iwe.cmd = SIOCGIWESSID; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->ssid.octets); + + /* Capabilities */ +#define CAP_ESS 0x01 +#define CAP_IBSS 0x02 +#define CAP_CRYPT 0x10 + + /* Mode */ + cap = bss->capinfo; + iwe.u.mode = 0; + if (cap & CAP_ESS) + iwe.u.mode = IW_MODE_MASTER; + else if (cap & CAP_IBSS) + iwe.u.mode = IW_MODE_ADHOC; + iwe.cmd = SIOCGIWMODE; + if (iwe.u.mode) + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); + + /* Encryption capability */ + if (cap & CAP_CRYPT) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + iwe.cmd = SIOCGIWENCODE; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, NULL); + + /* Add frequency. (short) bss->channel is the frequency in MHz */ + iwe.u.freq.m = bss->channel; + iwe.u.freq.e = 6; + iwe.cmd = SIOCGIWFREQ; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + + /* Add quality statistics */ + iwe.u.qual.level = bss->rssi; + iwe.u.qual.noise = noise; + /* do a simple SNR for quality */ + iwe.u.qual.qual = bss->rssi - noise; + iwe.cmd = IWEVQUAL; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); + + /* Add WPA/RSN Information Element, if any */ + wpa_ie_len = prism54_wpa_bss_ie_get(priv, bss->address, wpa_ie); + if (wpa_ie_len > 0) { + iwe.cmd = IWEVGENIE; + iwe.u.data.length = min_t(size_t, wpa_ie_len, MAX_WPA_IE_LEN); + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, wpa_ie); + } + /* Do the bitrates */ + { + char *current_val = current_ev + iwe_stream_lcp_len(info); + int i; + int mask; + + iwe.cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; + + /* Parse the bitmask */ + mask = 0x1; + for(i = 0; i < sizeof(scan_rate_list); i++) { + if(bss->rates & mask) { + iwe.u.bitrate.value = (scan_rate_list[i] * 500000); + current_val = iwe_stream_add_value( + info, current_ev, current_val, + end_buf, &iwe, IW_EV_PARAM_LEN); + } + mask <<= 1; + } + /* Check if we added any event */ + if ((current_val - current_ev) > iwe_stream_lcp_len(info)) + current_ev = current_val; + } + + return current_ev; +} + +static int +prism54_get_scan(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + int i, rvalue; + struct obj_bsslist *bsslist; + u32 noise = 0; + char *current_ev = extra; + union oid_res_t r; + + if (islpci_get_state(priv) < PRV_STATE_INIT) { + /* device is not ready, fail gently */ + dwrq->length = 0; + return 0; + } + + /* first get the noise value. We will use it to report the link quality */ + rvalue = mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r); + noise = r.u; + + /* Ask the device for a list of known bss. + * The old API, using SIOCGIWAPLIST, had a hard limit of IW_MAX_AP=64. + * The new API, using SIOCGIWSCAN, is only limited by the buffer size. + * WE-14->WE-16, the buffer is limited to IW_SCAN_MAX_DATA bytes. + * Starting with WE-17, the buffer can be as big as needed. + * But the device won't repport anything if you change the value + * of IWMAX_BSS=24. */ + + rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r); + bsslist = r.ptr; + + /* ok now, scan the list and translate its info */ + for (i = 0; i < (int) bsslist->nr; i++) { + current_ev = prism54_translate_bss(ndev, info, current_ev, + extra + dwrq->length, + &(bsslist->bsslist[i]), + noise); + + /* Check if there is space for one more entry */ + if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a bigger buffer */ + rvalue = -E2BIG; + break; + } + } + + kfree(bsslist); + dwrq->length = (current_ev - extra); + dwrq->flags = 0; /* todo */ + + return rvalue; +} + +static int +prism54_set_essid(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct obj_ssid essid; + + memset(essid.octets, 0, 33); + + /* Check if we were asked for `any' */ + if (dwrq->flags && dwrq->length) { + if (dwrq->length > 32) + return -E2BIG; + essid.length = dwrq->length; + memcpy(essid.octets, extra, dwrq->length); + } else + essid.length = 0; + + if (priv->iw_mode != IW_MODE_MONITOR) + return mgt_set_request(priv, DOT11_OID_SSID, 0, &essid); + + /* If in monitor mode, just save to mib */ + mgt_set(priv, DOT11_OID_SSID, &essid); + return 0; + +} + +static int +prism54_get_essid(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct obj_ssid *essid; + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, DOT11_OID_SSID, 0, NULL, &r); + essid = r.ptr; + + if (essid->length) { + dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */ + /* if it is too big, trunk it */ + dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length); + } else { + dwrq->flags = 0; + dwrq->length = 0; + } + essid->octets[dwrq->length] = '\0'; + memcpy(extra, essid->octets, dwrq->length); + kfree(essid); + + return rvalue; +} + +/* Provides no functionality, just completes the ioctl. In essence this is a + * just a cosmetic ioctl. + */ +static int +prism54_set_nick(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + if (dwrq->length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + down_write(&priv->mib_sem); + memset(priv->nickname, 0, sizeof (priv->nickname)); + memcpy(priv->nickname, extra, dwrq->length); + up_write(&priv->mib_sem); + + return 0; +} + +static int +prism54_get_nick(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + dwrq->length = 0; + + down_read(&priv->mib_sem); + dwrq->length = strlen(priv->nickname); + memcpy(extra, priv->nickname, dwrq->length); + up_read(&priv->mib_sem); + + return 0; +} + +/* Set the allowed Bitrates */ + +static int +prism54_set_rate(struct net_device *ndev, + struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + + islpci_private *priv = netdev_priv(ndev); + u32 rate, profile; + char *data; + int ret, i; + union oid_res_t r; + + if (vwrq->value == -1) { + /* auto mode. No limit. */ + profile = 1; + return mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile); + } + + ret = mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r); + if (ret) { + kfree(r.ptr); + return ret; + } + + rate = (u32) (vwrq->value / 500000); + data = r.ptr; + i = 0; + + while (data[i]) { + if (rate && (data[i] == rate)) { + break; + } + if (vwrq->value == i) { + break; + } + data[i] |= 0x80; + i++; + } + + if (!data[i]) { + kfree(r.ptr); + return -EINVAL; + } + + data[i] |= 0x80; + data[i + 1] = 0; + + /* Now, check if we want a fixed or auto value */ + if (vwrq->fixed) { + data[0] = data[i]; + data[1] = 0; + } + +/* + i = 0; + printk("prism54 rate: "); + while(data[i]) { + printk("%u ", data[i]); + i++; + } + printk("0\n"); +*/ + profile = -1; + ret = mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile); + ret |= mgt_set_request(priv, DOT11_OID_EXTENDEDRATES, 0, data); + ret |= mgt_set_request(priv, DOT11_OID_RATES, 0, data); + + kfree(r.ptr); + + return ret; +} + +/* Get the current bit rate */ +static int +prism54_get_rate(struct net_device *ndev, + struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + int rvalue; + char *data; + union oid_res_t r; + + /* Get the current bit rate */ + if ((rvalue = mgt_get_request(priv, GEN_OID_LINKSTATE, 0, NULL, &r))) + return rvalue; + vwrq->value = r.u * 500000; + + /* request the device for the enabled rates */ + rvalue = mgt_get_request(priv, DOT11_OID_RATES, 0, NULL, &r); + if (rvalue) { + kfree(r.ptr); + return rvalue; + } + data = r.ptr; + vwrq->fixed = (data[0] != 0) && (data[1] == 0); + kfree(r.ptr); + + return 0; +} + +static int +prism54_set_rts(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + return mgt_set_request(priv, DOT11_OID_RTSTHRESH, 0, &vwrq->value); +} + +static int +prism54_get_rts(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + /* get the rts threshold */ + rvalue = mgt_get_request(priv, DOT11_OID_RTSTHRESH, 0, NULL, &r); + vwrq->value = r.u; + + return rvalue; +} + +static int +prism54_set_frag(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + return mgt_set_request(priv, DOT11_OID_FRAGTHRESH, 0, &vwrq->value); +} + +static int +prism54_get_frag(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, DOT11_OID_FRAGTHRESH, 0, NULL, &r); + vwrq->value = r.u; + + return rvalue; +} + +/* Here we have (min,max) = max retries for (small frames, big frames). Where + * big frame <=> bigger than the rts threshold + * small frame <=> smaller than the rts threshold + * This is not really the behavior expected by the wireless tool but it seems + * to be a common behavior in other drivers. + */ + +static int +prism54_set_retry(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + u32 slimit = 0, llimit = 0; /* short and long limit */ + u32 lifetime = 0; + int rvalue = 0; + + if (vwrq->disabled) + /* we cannot disable this feature */ + return -EINVAL; + + if (vwrq->flags & IW_RETRY_LIMIT) { + if (vwrq->flags & IW_RETRY_SHORT) + slimit = vwrq->value; + else if (vwrq->flags & IW_RETRY_LONG) + llimit = vwrq->value; + else { + /* we are asked to set both */ + slimit = vwrq->value; + llimit = vwrq->value; + } + } + if (vwrq->flags & IW_RETRY_LIFETIME) + /* Wireless tools use us unit while the device uses 1024 us unit */ + lifetime = vwrq->value / 1024; + + /* now set what is requested */ + if (slimit) + rvalue = + mgt_set_request(priv, DOT11_OID_SHORTRETRIES, 0, &slimit); + if (llimit) + rvalue |= + mgt_set_request(priv, DOT11_OID_LONGRETRIES, 0, &llimit); + if (lifetime) + rvalue |= + mgt_set_request(priv, DOT11_OID_MAXTXLIFETIME, 0, + &lifetime); + return rvalue; +} + +static int +prism54_get_retry(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue = 0; + vwrq->disabled = 0; /* It cannot be disabled */ + + if ((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { + /* we are asked for the life time */ + rvalue = + mgt_get_request(priv, DOT11_OID_MAXTXLIFETIME, 0, NULL, &r); + vwrq->value = r.u * 1024; + vwrq->flags = IW_RETRY_LIFETIME; + } else if ((vwrq->flags & IW_RETRY_LONG)) { + /* we are asked for the long retry limit */ + rvalue |= + mgt_get_request(priv, DOT11_OID_LONGRETRIES, 0, NULL, &r); + vwrq->value = r.u; + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; + } else { + /* default. get the short retry limit */ + rvalue |= + mgt_get_request(priv, DOT11_OID_SHORTRETRIES, 0, NULL, &r); + vwrq->value = r.u; + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_SHORT; + } + + return rvalue; +} + +static int +prism54_set_encode(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + int rvalue = 0, force = 0; + int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0; + union oid_res_t r; + + /* with the new API, it's impossible to get a NULL pointer. + * New version of iwconfig set the IW_ENCODE_NOKEY flag + * when no key is given, but older versions don't. */ + + if (dwrq->length > 0) { + /* we have a key to set */ + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + int current_index; + struct obj_key key = { DOT11_PRIV_WEP, 0, "" }; + + /* get the current key index */ + rvalue = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r); + current_index = r.u; + /* Verify that the key is not marked as invalid */ + if (!(dwrq->flags & IW_ENCODE_NOKEY)) { + if (dwrq->length > KEY_SIZE_TKIP) { + /* User-provided key data too big */ + return -EINVAL; + } + if (dwrq->length > KEY_SIZE_WEP104) { + /* WPA-PSK TKIP */ + key.type = DOT11_PRIV_TKIP; + key.length = KEY_SIZE_TKIP; + } else if (dwrq->length > KEY_SIZE_WEP40) { + /* WEP 104/128 */ + key.length = KEY_SIZE_WEP104; + } else { + /* WEP 40/64 */ + key.length = KEY_SIZE_WEP40; + } + memset(key.key, 0, sizeof (key.key)); + memcpy(key.key, extra, dwrq->length); + + if ((index < 0) || (index > 3)) + /* no index provided use the current one */ + index = current_index; + + /* now send the key to the card */ + rvalue |= + mgt_set_request(priv, DOT11_OID_DEFKEYX, index, + &key); + } + /* + * If a valid key is set, encryption should be enabled + * (user may turn it off later). + * This is also how "iwconfig ethX key on" works + */ + if ((index == current_index) && (key.length > 0)) + force = 1; + } else { + int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + if ((index >= 0) && (index <= 3)) { + /* we want to set the key index */ + rvalue |= + mgt_set_request(priv, DOT11_OID_DEFKEYID, 0, + &index); + } else { + if (!(dwrq->flags & IW_ENCODE_MODE)) { + /* we cannot do anything. Complain. */ + return -EINVAL; + } + } + } + /* now read the flags */ + if (dwrq->flags & IW_ENCODE_DISABLED) { + /* Encoding disabled, + * authen = DOT11_AUTH_OS; + * invoke = 0; + * exunencrypt = 0; */ + } + if (dwrq->flags & IW_ENCODE_OPEN) + /* Encode but accept non-encoded packets. No auth */ + invoke = 1; + if ((dwrq->flags & IW_ENCODE_RESTRICTED) || force) { + /* Refuse non-encoded packets. Auth */ + authen = DOT11_AUTH_BOTH; + invoke = 1; + exunencrypt = 1; + } + /* do the change if requested */ + if ((dwrq->flags & IW_ENCODE_MODE) || force) { + rvalue |= + mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen); + rvalue |= + mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &invoke); + rvalue |= + mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, + &exunencrypt); + } + return rvalue; +} + +static int +prism54_get_encode(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct obj_key *key; + u32 devindex, index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + u32 authen = 0, invoke = 0, exunencrypt = 0; + int rvalue; + union oid_res_t r; + + /* first get the flags */ + rvalue = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r); + authen = r.u; + rvalue |= mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r); + invoke = r.u; + rvalue |= mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r); + exunencrypt = r.u; + + if (invoke && (authen == DOT11_AUTH_BOTH) && exunencrypt) + dwrq->flags = IW_ENCODE_RESTRICTED; + else if ((authen == DOT11_AUTH_OS) && !exunencrypt) { + if (invoke) + dwrq->flags = IW_ENCODE_OPEN; + else + dwrq->flags = IW_ENCODE_DISABLED; + } else + /* The card should not work in this state */ + dwrq->flags = 0; + + /* get the current device key index */ + rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r); + devindex = r.u; + /* Now get the key, return it */ + if (index == -1 || index > 3) + /* no index provided, use the current one */ + index = devindex; + rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYX, index, NULL, &r); + key = r.ptr; + dwrq->length = key->length; + memcpy(extra, key->key, dwrq->length); + kfree(key); + /* return the used key index */ + dwrq->flags |= devindex + 1; + + return rvalue; +} + +static int +prism54_get_txpower(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + union oid_res_t r; + int rvalue; + + rvalue = mgt_get_request(priv, OID_INL_OUTPUTPOWER, 0, NULL, &r); + /* intersil firmware operates in 0.25 dBm (1/4 dBm) */ + vwrq->value = (s32) r.u / 4; + vwrq->fixed = 1; + /* radio is not turned of + * btw: how is possible to turn off only the radio + */ + vwrq->disabled = 0; + + return rvalue; +} + +static int +prism54_set_txpower(struct net_device *ndev, struct iw_request_info *info, + struct iw_param *vwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + s32 u = vwrq->value; + + /* intersil firmware operates in 0.25 dBm (1/4) */ + u *= 4; + if (vwrq->disabled) { + /* don't know how to disable radio */ + printk(KERN_DEBUG + "%s: %s() disabling radio is not yet supported.\n", + priv->ndev->name, __func__); + return -ENOTSUPP; + } else if (vwrq->fixed) + /* currently only fixed value is supported */ + return mgt_set_request(priv, OID_INL_OUTPUTPOWER, 0, &u); + else { + printk(KERN_DEBUG + "%s: %s() auto power will be implemented later.\n", + priv->ndev->name, __func__); + return -ENOTSUPP; + } +} + +static int prism54_set_genie(struct net_device *ndev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + int alen, ret = 0; + struct obj_attachment *attach; + + if (data->length > MAX_WPA_IE_LEN || + (data->length && extra == NULL)) + return -EINVAL; + + memcpy(priv->wpa_ie, extra, data->length); + priv->wpa_ie_len = data->length; + + alen = sizeof(*attach) + priv->wpa_ie_len; + attach = kzalloc(alen, GFP_KERNEL); + if (attach == NULL) + return -ENOMEM; + +#define WLAN_FC_TYPE_MGMT 0 +#define WLAN_FC_STYPE_ASSOC_REQ 0 +#define WLAN_FC_STYPE_REASSOC_REQ 2 + + /* Note: endianness is covered by mgt_set_varlen */ + attach->type = (WLAN_FC_TYPE_MGMT << 2) | + (WLAN_FC_STYPE_ASSOC_REQ << 4); + attach->id = -1; + attach->size = priv->wpa_ie_len; + memcpy(attach->data, extra, priv->wpa_ie_len); + + ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach, + priv->wpa_ie_len); + if (ret == 0) { + attach->type = (WLAN_FC_TYPE_MGMT << 2) | + (WLAN_FC_STYPE_REASSOC_REQ << 4); + + ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach, + priv->wpa_ie_len); + if (ret == 0) + printk(KERN_DEBUG "%s: WPA IE Attachment was set\n", + ndev->name); + } + + kfree(attach); + return ret; +} + + +static int prism54_get_genie(struct net_device *ndev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + int len = priv->wpa_ie_len; + + if (len <= 0) { + data->length = 0; + return 0; + } + + if (data->length < len) + return -E2BIG; + + data->length = len; + memcpy(extra, priv->wpa_ie, len); + + return 0; +} + +static int prism54_set_auth(struct net_device *ndev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct iw_param *param = &wrqu->param; + u32 mlmelevel = 0, authen = 0, dot1x = 0; + u32 exunencrypt = 0, privinvoked = 0, wpa = 0; + u32 old_wpa; + int ret = 0; + union oid_res_t r; + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return 0; + + /* first get the flags */ + down_write(&priv->mib_sem); + wpa = old_wpa = priv->wpa; + up_write(&priv->mib_sem); + ret = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r); + authen = r.u; + ret = mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r); + privinvoked = r.u; + ret = mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r); + exunencrypt = r.u; + ret = mgt_get_request(priv, DOT11_OID_DOT1XENABLE, 0, NULL, &r); + dot1x = r.u; + ret = mgt_get_request(priv, DOT11_OID_MLMEAUTOLEVEL, 0, NULL, &r); + mlmelevel = r.u; + + if (ret < 0) + goto out; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_CIPHER_PAIRWISE: + case IW_AUTH_CIPHER_GROUP: + case IW_AUTH_KEY_MGMT: + break; + + case IW_AUTH_WPA_ENABLED: + /* Do the same thing as IW_AUTH_WPA_VERSION */ + if (param->value) { + wpa = 1; + privinvoked = 1; /* For privacy invoked */ + exunencrypt = 1; /* Filter out all unencrypted frames */ + dot1x = 0x01; /* To enable eap filter */ + mlmelevel = DOT11_MLME_EXTENDED; + authen = DOT11_AUTH_OS; /* Only WEP uses _SK and _BOTH */ + } else { + wpa = 0; + privinvoked = 0; + exunencrypt = 0; /* Do not filter un-encrypted data */ + dot1x = 0; + mlmelevel = DOT11_MLME_AUTO; + } + break; + + case IW_AUTH_WPA_VERSION: + if (param->value & IW_AUTH_WPA_VERSION_DISABLED) { + wpa = 0; + privinvoked = 0; + exunencrypt = 0; /* Do not filter un-encrypted data */ + dot1x = 0; + mlmelevel = DOT11_MLME_AUTO; + } else { + if (param->value & IW_AUTH_WPA_VERSION_WPA) + wpa = 1; + else if (param->value & IW_AUTH_WPA_VERSION_WPA2) + wpa = 2; + privinvoked = 1; /* For privacy invoked */ + exunencrypt = 1; /* Filter out all unencrypted frames */ + dot1x = 0x01; /* To enable eap filter */ + mlmelevel = DOT11_MLME_EXTENDED; + authen = DOT11_AUTH_OS; /* Only WEP uses _SK and _BOTH */ + } + break; + + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + /* dot1x should be the opposite of RX_UNENCRYPTED_EAPOL; + * turn off dot1x when allowing receipt of unencrypted EAPOL + * frames, turn on dot1x when receipt should be disallowed + */ + dot1x = param->value ? 0 : 0x01; + break; + + case IW_AUTH_PRIVACY_INVOKED: + privinvoked = param->value ? 1 : 0; + break; + + case IW_AUTH_DROP_UNENCRYPTED: + exunencrypt = param->value ? 1 : 0; + break; + + case IW_AUTH_80211_AUTH_ALG: + if (param->value & IW_AUTH_ALG_SHARED_KEY) { + /* Only WEP uses _SK and _BOTH */ + if (wpa > 0) { + ret = -EINVAL; + goto out; + } + authen = DOT11_AUTH_SK; + } else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) { + authen = DOT11_AUTH_OS; + } else { + ret = -EINVAL; + goto out; + } + break; + + default: + return -EOPNOTSUPP; + } + + /* Set all the values */ + down_write(&priv->mib_sem); + priv->wpa = wpa; + up_write(&priv->mib_sem); + mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen); + mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &privinvoked); + mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, &exunencrypt); + mgt_set_request(priv, DOT11_OID_DOT1XENABLE, 0, &dot1x); + mgt_set_request(priv, DOT11_OID_MLMEAUTOLEVEL, 0, &mlmelevel); + +out: + return ret; +} + +static int prism54_get_auth(struct net_device *ndev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct iw_param *param = &wrqu->param; + u32 wpa = 0; + int ret = 0; + union oid_res_t r; + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return 0; + + /* first get the flags */ + down_write(&priv->mib_sem); + wpa = priv->wpa; + up_write(&priv->mib_sem); + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_CIPHER_PAIRWISE: + case IW_AUTH_CIPHER_GROUP: + case IW_AUTH_KEY_MGMT: + /* + * wpa_supplicant will control these internally + */ + ret = -EOPNOTSUPP; + break; + + case IW_AUTH_WPA_VERSION: + switch (wpa) { + case 1: + param->value = IW_AUTH_WPA_VERSION_WPA; + break; + case 2: + param->value = IW_AUTH_WPA_VERSION_WPA2; + break; + case 0: + default: + param->value = IW_AUTH_WPA_VERSION_DISABLED; + break; + } + break; + + case IW_AUTH_DROP_UNENCRYPTED: + ret = mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r); + if (ret >= 0) + param->value = r.u > 0 ? 1 : 0; + break; + + case IW_AUTH_80211_AUTH_ALG: + ret = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r); + if (ret >= 0) { + switch (r.u) { + case DOT11_AUTH_OS: + param->value = IW_AUTH_ALG_OPEN_SYSTEM; + break; + case DOT11_AUTH_BOTH: + case DOT11_AUTH_SK: + param->value = IW_AUTH_ALG_SHARED_KEY; + break; + case DOT11_AUTH_NONE: + default: + param->value = 0; + break; + } + } + break; + + case IW_AUTH_WPA_ENABLED: + param->value = wpa > 0 ? 1 : 0; + break; + + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + ret = mgt_get_request(priv, DOT11_OID_DOT1XENABLE, 0, NULL, &r); + if (ret >= 0) + param->value = r.u > 0 ? 1 : 0; + break; + + case IW_AUTH_PRIVACY_INVOKED: + ret = mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r); + if (ret >= 0) + param->value = r.u > 0 ? 1 : 0; + break; + + default: + return -EOPNOTSUPP; + } + return ret; +} + +static int prism54_set_encodeext(struct net_device *ndev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, alg = ext->alg, set_key = 1; + union oid_res_t r; + int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0; + int ret = 0; + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return 0; + + /* Determine and validate the key index */ + idx = (encoding->flags & IW_ENCODE_INDEX) - 1; + if (idx) { + if (idx < 0 || idx > 3) + return -EINVAL; + } else { + ret = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r); + if (ret < 0) + goto out; + idx = r.u; + } + + if (encoding->flags & IW_ENCODE_DISABLED) + alg = IW_ENCODE_ALG_NONE; + + if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + /* Only set transmit key index here, actual + * key is set below if needed. + */ + ret = mgt_set_request(priv, DOT11_OID_DEFKEYID, 0, &idx); + set_key = ext->key_len > 0 ? 1 : 0; + } + + if (set_key) { + struct obj_key key = { DOT11_PRIV_WEP, 0, "" }; + switch (alg) { + case IW_ENCODE_ALG_NONE: + break; + case IW_ENCODE_ALG_WEP: + if (ext->key_len > KEY_SIZE_WEP104) { + ret = -EINVAL; + goto out; + } + if (ext->key_len > KEY_SIZE_WEP40) + key.length = KEY_SIZE_WEP104; + else + key.length = KEY_SIZE_WEP40; + break; + case IW_ENCODE_ALG_TKIP: + if (ext->key_len > KEY_SIZE_TKIP) { + ret = -EINVAL; + goto out; + } + key.type = DOT11_PRIV_TKIP; + key.length = KEY_SIZE_TKIP; + break; + default: + return -EINVAL; + } + + if (key.length) { + memset(key.key, 0, sizeof(key.key)); + memcpy(key.key, ext->key, ext->key_len); + ret = mgt_set_request(priv, DOT11_OID_DEFKEYX, idx, + &key); + if (ret < 0) + goto out; + } + } + + /* Read the flags */ + if (encoding->flags & IW_ENCODE_DISABLED) { + /* Encoding disabled, + * authen = DOT11_AUTH_OS; + * invoke = 0; + * exunencrypt = 0; */ + } + if (encoding->flags & IW_ENCODE_OPEN) { + /* Encode but accept non-encoded packets. No auth */ + invoke = 1; + } + if (encoding->flags & IW_ENCODE_RESTRICTED) { + /* Refuse non-encoded packets. Auth */ + authen = DOT11_AUTH_BOTH; + invoke = 1; + exunencrypt = 1; + } + + /* do the change if requested */ + if (encoding->flags & IW_ENCODE_MODE) { + ret = mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, + &authen); + ret = mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, + &invoke); + ret = mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, + &exunencrypt); + } + +out: + return ret; +} + + +static int prism54_get_encodeext(struct net_device *ndev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, max_key_len; + union oid_res_t r; + int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0, wpa = 0; + int ret = 0; + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return 0; + + /* first get the flags */ + ret = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r); + authen = r.u; + ret = mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r); + invoke = r.u; + ret = mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r); + exunencrypt = r.u; + if (ret < 0) + goto out; + + max_key_len = encoding->length - sizeof(*ext); + if (max_key_len < 0) + return -EINVAL; + + idx = (encoding->flags & IW_ENCODE_INDEX) - 1; + if (idx) { + if (idx < 0 || idx > 3) + return -EINVAL; + } else { + ret = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r); + if (ret < 0) + goto out; + idx = r.u; + } + + encoding->flags = idx + 1; + memset(ext, 0, sizeof(*ext)); + + switch (authen) { + case DOT11_AUTH_BOTH: + case DOT11_AUTH_SK: + wrqu->encoding.flags |= IW_ENCODE_RESTRICTED; + case DOT11_AUTH_OS: + default: + wrqu->encoding.flags |= IW_ENCODE_OPEN; + break; + } + + down_write(&priv->mib_sem); + wpa = priv->wpa; + up_write(&priv->mib_sem); + + if (authen == DOT11_AUTH_OS && !exunencrypt && !invoke && !wpa) { + /* No encryption */ + ext->alg = IW_ENCODE_ALG_NONE; + ext->key_len = 0; + wrqu->encoding.flags |= IW_ENCODE_DISABLED; + } else { + struct obj_key *key; + + ret = mgt_get_request(priv, DOT11_OID_DEFKEYX, idx, NULL, &r); + if (ret < 0) + goto out; + key = r.ptr; + if (max_key_len < key->length) { + ret = -E2BIG; + goto out; + } + memcpy(ext->key, key->key, key->length); + ext->key_len = key->length; + + switch (key->type) { + case DOT11_PRIV_TKIP: + ext->alg = IW_ENCODE_ALG_TKIP; + break; + default: + case DOT11_PRIV_WEP: + ext->alg = IW_ENCODE_ALG_WEP; + break; + } + wrqu->encoding.flags |= IW_ENCODE_ENABLED; + } + +out: + return ret; +} + + +static int +prism54_reset(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_reset(netdev_priv(ndev), 0); + + return 0; +} + +static int +prism54_get_oid(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + union oid_res_t r; + int rvalue; + enum oid_num_t n = dwrq->flags; + + rvalue = mgt_get_request(netdev_priv(ndev), n, 0, NULL, &r); + dwrq->length = mgt_response_to_str(n, &r, extra); + if ((isl_oid[n].flags & OID_FLAG_TYPE) != OID_TYPE_U32) + kfree(r.ptr); + return rvalue; +} + +static int +prism54_set_u32(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + u32 oid = uwrq[0], u = uwrq[1]; + + return mgt_set_request(netdev_priv(ndev), oid, 0, &u); +} + +static int +prism54_set_raw(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + u32 oid = dwrq->flags; + + return mgt_set_request(netdev_priv(ndev), oid, 0, extra); +} + +void +prism54_acl_init(struct islpci_acl *acl) +{ + mutex_init(&acl->lock); + INIT_LIST_HEAD(&acl->mac_list); + acl->size = 0; + acl->policy = MAC_POLICY_OPEN; +} + +static void +prism54_clear_mac(struct islpci_acl *acl) +{ + struct list_head *ptr, *next; + struct mac_entry *entry; + + mutex_lock(&acl->lock); + + if (acl->size == 0) { + mutex_unlock(&acl->lock); + return; + } + + for (ptr = acl->mac_list.next, next = ptr->next; + ptr != &acl->mac_list; ptr = next, next = ptr->next) { + entry = list_entry(ptr, struct mac_entry, _list); + list_del(ptr); + kfree(entry); + } + acl->size = 0; + mutex_unlock(&acl->lock); +} + +void +prism54_acl_clean(struct islpci_acl *acl) +{ + prism54_clear_mac(acl); +} + +static int +prism54_add_mac(struct net_device *ndev, struct iw_request_info *info, + struct sockaddr *awrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_acl *acl = &priv->acl; + struct mac_entry *entry; + struct sockaddr *addr = (struct sockaddr *) extra; + + if (addr->sa_family != ARPHRD_ETHER) + return -EOPNOTSUPP; + + entry = kmalloc(sizeof (struct mac_entry), GFP_KERNEL); + if (entry == NULL) + return -ENOMEM; + + memcpy(entry->addr, addr->sa_data, ETH_ALEN); + + if (mutex_lock_interruptible(&acl->lock)) { + kfree(entry); + return -ERESTARTSYS; + } + list_add_tail(&entry->_list, &acl->mac_list); + acl->size++; + mutex_unlock(&acl->lock); + + return 0; +} + +static int +prism54_del_mac(struct net_device *ndev, struct iw_request_info *info, + struct sockaddr *awrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_acl *acl = &priv->acl; + struct mac_entry *entry; + struct sockaddr *addr = (struct sockaddr *) extra; + + if (addr->sa_family != ARPHRD_ETHER) + return -EOPNOTSUPP; + + if (mutex_lock_interruptible(&acl->lock)) + return -ERESTARTSYS; + list_for_each_entry(entry, &acl->mac_list, _list) { + if (ether_addr_equal(entry->addr, addr->sa_data)) { + list_del(&entry->_list); + acl->size--; + kfree(entry); + mutex_unlock(&acl->lock); + return 0; + } + } + mutex_unlock(&acl->lock); + return -EINVAL; +} + +static int +prism54_get_mac(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_acl *acl = &priv->acl; + struct mac_entry *entry; + struct sockaddr *dst = (struct sockaddr *) extra; + + dwrq->length = 0; + + if (mutex_lock_interruptible(&acl->lock)) + return -ERESTARTSYS; + + list_for_each_entry(entry, &acl->mac_list, _list) { + memcpy(dst->sa_data, entry->addr, ETH_ALEN); + dst->sa_family = ARPHRD_ETHER; + dwrq->length++; + dst++; + } + mutex_unlock(&acl->lock); + return 0; +} + +/* Setting policy also clears the MAC acl, even if we don't change the default + * policy + */ + +static int +prism54_set_policy(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_acl *acl = &priv->acl; + u32 mlmeautolevel; + + prism54_clear_mac(acl); + + if ((*uwrq < MAC_POLICY_OPEN) || (*uwrq > MAC_POLICY_REJECT)) + return -EINVAL; + + down_write(&priv->mib_sem); + + acl->policy = *uwrq; + + /* the ACL code needs an intermediate mlmeautolevel */ + if ((priv->iw_mode == IW_MODE_MASTER) && + (acl->policy != MAC_POLICY_OPEN)) + mlmeautolevel = DOT11_MLME_INTERMEDIATE; + else + mlmeautolevel = CARD_DEFAULT_MLME_MODE; + if (priv->wpa) + mlmeautolevel = DOT11_MLME_EXTENDED; + mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel); + /* restart the card with our new policy */ + if (mgt_commit(priv)) { + up_write(&priv->mib_sem); + return -EIO; + } + up_write(&priv->mib_sem); + + return 0; +} + +static int +prism54_get_policy(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_acl *acl = &priv->acl; + + *uwrq = acl->policy; + + return 0; +} + +/* Return 1 only if client should be accepted. */ + +static int +prism54_mac_accept(struct islpci_acl *acl, char *mac) +{ + struct mac_entry *entry; + int res = 0; + + if (mutex_lock_interruptible(&acl->lock)) + return -ERESTARTSYS; + + if (acl->policy == MAC_POLICY_OPEN) { + mutex_unlock(&acl->lock); + return 1; + } + + list_for_each_entry(entry, &acl->mac_list, _list) { + if (memcmp(entry->addr, mac, ETH_ALEN) == 0) { + res = 1; + break; + } + } + res = (acl->policy == MAC_POLICY_ACCEPT) ? !res : res; + mutex_unlock(&acl->lock); + + return res; +} + +static int +prism54_kick_all(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *dwrq, char *extra) +{ + struct obj_mlme *mlme; + int rvalue; + + mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL); + if (mlme == NULL) + return -ENOMEM; + + /* Tell the card to kick every client */ + mlme->id = 0; + rvalue = + mgt_set_request(netdev_priv(ndev), DOT11_OID_DISASSOCIATE, 0, mlme); + kfree(mlme); + + return rvalue; +} + +static int +prism54_kick_mac(struct net_device *ndev, struct iw_request_info *info, + struct sockaddr *awrq, char *extra) +{ + struct obj_mlme *mlme; + struct sockaddr *addr = (struct sockaddr *) extra; + int rvalue; + + if (addr->sa_family != ARPHRD_ETHER) + return -EOPNOTSUPP; + + mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL); + if (mlme == NULL) + return -ENOMEM; + + /* Tell the card to only kick the corresponding bastard */ + memcpy(mlme->address, addr->sa_data, ETH_ALEN); + mlme->id = -1; + rvalue = + mgt_set_request(netdev_priv(ndev), DOT11_OID_DISASSOCIATE, 0, mlme); + + kfree(mlme); + + return rvalue; +} + +/* Translate a TRAP oid into a wireless event. Called in islpci_mgt_receive. */ + +static void +format_event(islpci_private *priv, char *dest, const char *str, + const struct obj_mlme *mlme, u16 *length, int error) +{ + int n = snprintf(dest, IW_CUSTOM_MAX, + "%s %s %pM %s (%2.2X)", + str, + ((priv->iw_mode == IW_MODE_MASTER) ? "from" : "to"), + mlme->address, + (error ? (mlme->code ? " : REJECTED " : " : ACCEPTED ") + : ""), mlme->code); + WARN_ON(n >= IW_CUSTOM_MAX); + *length = n; +} + +static void +send_formatted_event(islpci_private *priv, const char *str, + const struct obj_mlme *mlme, int error) +{ + union iwreq_data wrqu; + char *memptr; + + memptr = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL); + if (!memptr) + return; + wrqu.data.pointer = memptr; + wrqu.data.length = 0; + format_event(priv, memptr, str, mlme, &wrqu.data.length, + error); + wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, memptr); + kfree(memptr); +} + +static void +send_simple_event(islpci_private *priv, const char *str) +{ + union iwreq_data wrqu; + char *memptr; + int n = strlen(str); + + memptr = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL); + if (!memptr) + return; + BUG_ON(n >= IW_CUSTOM_MAX); + wrqu.data.pointer = memptr; + wrqu.data.length = n; + strcpy(memptr, str); + wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, memptr); + kfree(memptr); +} + +static void +link_changed(struct net_device *ndev, u32 bitrate) +{ + islpci_private *priv = netdev_priv(ndev); + + if (bitrate) { + netif_carrier_on(ndev); + if (priv->iw_mode == IW_MODE_INFRA) { + union iwreq_data uwrq; + prism54_get_wap(ndev, NULL, (struct sockaddr *) &uwrq, + NULL); + wireless_send_event(ndev, SIOCGIWAP, &uwrq, NULL); + } else + send_simple_event(netdev_priv(ndev), + "Link established"); + } else { + netif_carrier_off(ndev); + send_simple_event(netdev_priv(ndev), "Link lost"); + } +} + +/* Beacon/ProbeResp payload header */ +struct ieee80211_beacon_phdr { + u8 timestamp[8]; + u16 beacon_int; + u16 capab_info; +} __packed; + +#define WLAN_EID_GENERIC 0xdd +static u8 wpa_oid[4] = { 0x00, 0x50, 0xf2, 1 }; + +static void +prism54_wpa_bss_ie_add(islpci_private *priv, u8 *bssid, + u8 *wpa_ie, size_t wpa_ie_len) +{ + struct list_head *ptr; + struct islpci_bss_wpa_ie *bss = NULL; + + if (wpa_ie_len > MAX_WPA_IE_LEN) + wpa_ie_len = MAX_WPA_IE_LEN; + + mutex_lock(&priv->wpa_lock); + + /* try to use existing entry */ + list_for_each(ptr, &priv->bss_wpa_list) { + bss = list_entry(ptr, struct islpci_bss_wpa_ie, list); + if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0) { + list_move(&bss->list, &priv->bss_wpa_list); + break; + } + bss = NULL; + } + + if (bss == NULL) { + /* add a new BSS entry; if max number of entries is already + * reached, replace the least recently updated */ + if (priv->num_bss_wpa >= MAX_BSS_WPA_IE_COUNT) { + bss = list_entry(priv->bss_wpa_list.prev, + struct islpci_bss_wpa_ie, list); + list_del(&bss->list); + } else { + bss = kzalloc(sizeof (*bss), GFP_ATOMIC); + if (bss != NULL) + priv->num_bss_wpa++; + } + if (bss != NULL) { + memcpy(bss->bssid, bssid, ETH_ALEN); + list_add(&bss->list, &priv->bss_wpa_list); + } + } + + if (bss != NULL) { + memcpy(bss->wpa_ie, wpa_ie, wpa_ie_len); + bss->wpa_ie_len = wpa_ie_len; + bss->last_update = jiffies; + } else { + printk(KERN_DEBUG "Failed to add BSS WPA entry for " + "%pM\n", bssid); + } + + /* expire old entries from WPA list */ + while (priv->num_bss_wpa > 0) { + bss = list_entry(priv->bss_wpa_list.prev, + struct islpci_bss_wpa_ie, list); + if (!time_after(jiffies, bss->last_update + 60 * HZ)) + break; + + list_del(&bss->list); + priv->num_bss_wpa--; + kfree(bss); + } + + mutex_unlock(&priv->wpa_lock); +} + +static size_t +prism54_wpa_bss_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie) +{ + struct list_head *ptr; + struct islpci_bss_wpa_ie *bss = NULL; + size_t len = 0; + + mutex_lock(&priv->wpa_lock); + + list_for_each(ptr, &priv->bss_wpa_list) { + bss = list_entry(ptr, struct islpci_bss_wpa_ie, list); + if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0) + break; + bss = NULL; + } + if (bss) { + len = bss->wpa_ie_len; + memcpy(wpa_ie, bss->wpa_ie, len); + } + mutex_unlock(&priv->wpa_lock); + + return len; +} + +void +prism54_wpa_bss_ie_init(islpci_private *priv) +{ + INIT_LIST_HEAD(&priv->bss_wpa_list); + mutex_init(&priv->wpa_lock); +} + +void +prism54_wpa_bss_ie_clean(islpci_private *priv) +{ + struct islpci_bss_wpa_ie *bss, *n; + + list_for_each_entry_safe(bss, n, &priv->bss_wpa_list, list) { + kfree(bss); + } +} + +static void +prism54_process_bss_data(islpci_private *priv, u32 oid, u8 *addr, + u8 *payload, size_t len) +{ + struct ieee80211_beacon_phdr *hdr; + u8 *pos, *end; + + if (!priv->wpa) + return; + + hdr = (struct ieee80211_beacon_phdr *) payload; + pos = (u8 *) (hdr + 1); + end = payload + len; + while (pos < end) { + if (pos + 2 + pos[1] > end) { + printk(KERN_DEBUG "Parsing Beacon/ProbeResp failed " + "for %pM\n", addr); + return; + } + if (pos[0] == WLAN_EID_GENERIC && pos[1] >= 4 && + memcmp(pos + 2, wpa_oid, 4) == 0) { + prism54_wpa_bss_ie_add(priv, addr, pos, pos[1] + 2); + return; + } + pos += 2 + pos[1]; + } +} + +static void +handle_request(islpci_private *priv, struct obj_mlme *mlme, enum oid_num_t oid) +{ + if (((mlme->state == DOT11_STATE_AUTHING) || + (mlme->state == DOT11_STATE_ASSOCING)) + && mgt_mlme_answer(priv)) { + /* Someone is requesting auth and we must respond. Just send back + * the trap with error code set accordingly. + */ + mlme->code = prism54_mac_accept(&priv->acl, + mlme->address) ? 0 : 1; + mgt_set_request(priv, oid, 0, mlme); + } +} + +static int +prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, + char *data) +{ + struct obj_mlme *mlme = (struct obj_mlme *) data; + struct obj_mlmeex *mlmeex = (struct obj_mlmeex *) data; + struct obj_mlmeex *confirm; + u8 wpa_ie[MAX_WPA_IE_LEN]; + int wpa_ie_len; + size_t len = 0; /* u16, better? */ + u8 *payload = NULL, *pos = NULL; + int ret; + + /* I think all trapable objects are listed here. + * Some oids have a EX version. The difference is that they are emitted + * in DOT11_MLME_EXTENDED mode (set with DOT11_OID_MLMEAUTOLEVEL) + * with more info. + * The few events already defined by the wireless tools are not really + * suited. We use the more flexible custom event facility. + */ + + if (oid >= DOT11_OID_BEACON) { + len = mlmeex->size; + payload = pos = mlmeex->data; + } + + /* I fear prism54_process_bss_data won't work with big endian data */ + if ((oid == DOT11_OID_BEACON) || (oid == DOT11_OID_PROBE)) + prism54_process_bss_data(priv, oid, mlmeex->address, + payload, len); + + mgt_le_to_cpu(isl_oid[oid].flags & OID_FLAG_TYPE, (void *) mlme); + + switch (oid) { + + case GEN_OID_LINKSTATE: + link_changed(priv->ndev, (u32) *data); + break; + + case DOT11_OID_MICFAILURE: + send_simple_event(priv, "Mic failure"); + break; + + case DOT11_OID_DEAUTHENTICATE: + send_formatted_event(priv, "DeAuthenticate request", mlme, 0); + break; + + case DOT11_OID_AUTHENTICATE: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "Authenticate request", mlme, 1); + break; + + case DOT11_OID_DISASSOCIATE: + send_formatted_event(priv, "Disassociate request", mlme, 0); + break; + + case DOT11_OID_ASSOCIATE: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "Associate request", mlme, 1); + break; + + case DOT11_OID_REASSOCIATE: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "ReAssociate request", mlme, 1); + break; + + case DOT11_OID_BEACON: + send_formatted_event(priv, + "Received a beacon from an unknown AP", + mlme, 0); + break; + + case DOT11_OID_PROBE: + /* we received a probe from a client. */ + send_formatted_event(priv, "Received a probe from client", mlme, + 0); + break; + + /* Note : "mlme" is actually a "struct obj_mlmeex *" here, but this + * is backward compatible layout-wise with "struct obj_mlme". + */ + + case DOT11_OID_DEAUTHENTICATEEX: + send_formatted_event(priv, "DeAuthenticate request", mlme, 0); + break; + + case DOT11_OID_AUTHENTICATEEX: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "Authenticate request (ex)", mlme, 1); + + if (priv->iw_mode != IW_MODE_MASTER + && mlmeex->state != DOT11_STATE_AUTHING) + break; + + confirm = kmalloc(sizeof(struct obj_mlmeex) + 6, GFP_ATOMIC); + + if (!confirm) + break; + + memcpy(&confirm->address, mlmeex->address, ETH_ALEN); + printk(KERN_DEBUG "Authenticate from: address:\t%pM\n", + mlmeex->address); + confirm->id = -1; /* or mlmeex->id ? */ + confirm->state = 0; /* not used */ + confirm->code = 0; + confirm->size = 6; + confirm->data[0] = 0x00; + confirm->data[1] = 0x00; + confirm->data[2] = 0x02; + confirm->data[3] = 0x00; + confirm->data[4] = 0x00; + confirm->data[5] = 0x00; + + ret = mgt_set_varlen(priv, DOT11_OID_ASSOCIATEEX, confirm, 6); + + kfree(confirm); + if (ret) + return ret; + break; + + case DOT11_OID_DISASSOCIATEEX: + send_formatted_event(priv, "Disassociate request (ex)", mlme, 0); + break; + + case DOT11_OID_ASSOCIATEEX: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "Associate request (ex)", mlme, 1); + + if (priv->iw_mode != IW_MODE_MASTER + && mlmeex->state != DOT11_STATE_ASSOCING) + break; + + confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC); + + if (!confirm) + break; + + memcpy(&confirm->address, mlmeex->address, ETH_ALEN); + + confirm->id = ((struct obj_mlmeex *)mlme)->id; + confirm->state = 0; /* not used */ + confirm->code = 0; + + wpa_ie_len = prism54_wpa_bss_ie_get(priv, mlmeex->address, wpa_ie); + + if (!wpa_ie_len) { + printk(KERN_DEBUG "No WPA IE found from address:\t%pM\n", + mlmeex->address); + kfree(confirm); + break; + } + + confirm->size = wpa_ie_len; + memcpy(&confirm->data, wpa_ie, wpa_ie_len); + + mgt_set_varlen(priv, oid, confirm, wpa_ie_len); + + kfree(confirm); + + break; + + case DOT11_OID_REASSOCIATEEX: + handle_request(priv, mlme, oid); + send_formatted_event(priv, "Reassociate request (ex)", mlme, 1); + + if (priv->iw_mode != IW_MODE_MASTER + && mlmeex->state != DOT11_STATE_ASSOCING) + break; + + confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC); + + if (!confirm) + break; + + memcpy(&confirm->address, mlmeex->address, ETH_ALEN); + + confirm->id = mlmeex->id; + confirm->state = 0; /* not used */ + confirm->code = 0; + + wpa_ie_len = prism54_wpa_bss_ie_get(priv, mlmeex->address, wpa_ie); + + if (!wpa_ie_len) { + printk(KERN_DEBUG "No WPA IE found from address:\t%pM\n", + mlmeex->address); + kfree(confirm); + break; + } + + confirm->size = wpa_ie_len; + memcpy(&confirm->data, wpa_ie, wpa_ie_len); + + mgt_set_varlen(priv, oid, confirm, wpa_ie_len); + + kfree(confirm); + + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * Process a device trap. This is called via schedule_work(), outside of + * interrupt context, no locks held. + */ +void +prism54_process_trap(struct work_struct *work) +{ + struct islpci_mgmtframe *frame = + container_of(work, struct islpci_mgmtframe, ws); + struct net_device *ndev = frame->ndev; + enum oid_num_t n = mgt_oidtonum(frame->header->oid); + + if (n != OID_NUM_LAST) + prism54_process_trap_helper(netdev_priv(ndev), n, frame->data); + islpci_mgt_release(frame); +} + +int +prism54_set_mac_address(struct net_device *ndev, void *addr) +{ + islpci_private *priv = netdev_priv(ndev); + int ret; + + if (ndev->addr_len != 6) + return -EINVAL; + ret = mgt_set_request(priv, GEN_OID_MACADDRESS, 0, + &((struct sockaddr *) addr)->sa_data); + if (!ret) + memcpy(priv->ndev->dev_addr, + &((struct sockaddr *) addr)->sa_data, ETH_ALEN); + + return ret; +} + +#define PRISM54_SET_WPA SIOCIWFIRSTPRIV+12 + +static int +prism54_set_wpa(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + u32 mlme, authen, dot1x, filter, wep; + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return 0; + + wep = 1; /* For privacy invoked */ + filter = 1; /* Filter out all unencrypted frames */ + dot1x = 0x01; /* To enable eap filter */ + mlme = DOT11_MLME_EXTENDED; + authen = DOT11_AUTH_OS; /* Only WEP uses _SK and _BOTH */ + + down_write(&priv->mib_sem); + priv->wpa = *uwrq; + + switch (priv->wpa) { + default: + case 0: /* Clears/disables WPA and friends */ + wep = 0; + filter = 0; /* Do not filter un-encrypted data */ + dot1x = 0; + mlme = DOT11_MLME_AUTO; + printk("%s: Disabling WPA\n", ndev->name); + break; + case 2: + case 1: /* WPA */ + printk("%s: Enabling WPA\n", ndev->name); + break; + } + up_write(&priv->mib_sem); + + mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen); + mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &wep); + mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, &filter); + mgt_set_request(priv, DOT11_OID_DOT1XENABLE, 0, &dot1x); + mgt_set_request(priv, DOT11_OID_MLMEAUTOLEVEL, 0, &mlme); + + return 0; +} + +static int +prism54_get_wpa(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + *uwrq = priv->wpa; + return 0; +} + +static int +prism54_set_prismhdr(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + priv->monitor_type = + (*uwrq ? ARPHRD_IEEE80211_PRISM : ARPHRD_IEEE80211); + if (priv->iw_mode == IW_MODE_MONITOR) + priv->ndev->type = priv->monitor_type; + + return 0; +} + +static int +prism54_get_prismhdr(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + *uwrq = (priv->monitor_type == ARPHRD_IEEE80211_PRISM); + return 0; +} + +static int +prism54_debug_oid(struct net_device *ndev, struct iw_request_info *info, + __u32 * uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + + priv->priv_oid = *uwrq; + printk("%s: oid 0x%08X\n", ndev->name, *uwrq); + + return 0; +} + +static int +prism54_debug_get_oid(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_mgmtframe *response; + int ret = -EIO; + + printk("%s: get_oid 0x%08X\n", ndev->name, priv->priv_oid); + data->length = 0; + + if (islpci_get_state(priv) >= PRV_STATE_INIT) { + ret = + islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET, + priv->priv_oid, extra, 256, + &response); + printk("%s: ret: %i\n", ndev->name, ret); + if (ret || !response + || response->header->operation == PIMFOR_OP_ERROR) { + if (response) { + islpci_mgt_release(response); + } + printk("%s: EIO\n", ndev->name); + ret = -EIO; + } + if (!ret) { + data->length = response->header->length; + memcpy(extra, response->data, data->length); + islpci_mgt_release(response); + printk("%s: len: %i\n", ndev->name, data->length); + } + } + + return ret; +} + +static int +prism54_debug_set_oid(struct net_device *ndev, struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + struct islpci_mgmtframe *response; + int ret = 0, response_op = PIMFOR_OP_ERROR; + + printk("%s: set_oid 0x%08X\tlen: %d\n", ndev->name, priv->priv_oid, + data->length); + + if (islpci_get_state(priv) >= PRV_STATE_INIT) { + ret = + islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, + priv->priv_oid, extra, data->length, + &response); + printk("%s: ret: %i\n", ndev->name, ret); + if (ret || !response + || response->header->operation == PIMFOR_OP_ERROR) { + if (response) { + islpci_mgt_release(response); + } + printk("%s: EIO\n", ndev->name); + ret = -EIO; + } + if (!ret) { + response_op = response->header->operation; + printk("%s: response_op: %i\n", ndev->name, + response_op); + islpci_mgt_release(response); + } + } + + return (ret ? ret : -EINPROGRESS); +} + +static int +prism54_set_spy(struct net_device *ndev, + struct iw_request_info *info, + union iwreq_data *uwrq, char *extra) +{ + islpci_private *priv = netdev_priv(ndev); + u32 u; + enum oid_num_t oid = OID_INL_CONFIG; + + down_write(&priv->mib_sem); + mgt_get(priv, OID_INL_CONFIG, &u); + + if ((uwrq->data.length == 0) && (priv->spy_data.spy_number > 0)) + /* disable spy */ + u &= ~INL_CONFIG_RXANNEX; + else if ((uwrq->data.length > 0) && (priv->spy_data.spy_number == 0)) + /* enable spy */ + u |= INL_CONFIG_RXANNEX; + + mgt_set(priv, OID_INL_CONFIG, &u); + mgt_commit_list(priv, &oid, 1); + up_write(&priv->mib_sem); + + return iw_handler_set_spy(ndev, info, uwrq, extra); +} + +static const iw_handler prism54_handler[] = { + (iw_handler) prism54_commit, /* SIOCSIWCOMMIT */ + (iw_handler) prism54_get_name, /* SIOCGIWNAME */ + (iw_handler) NULL, /* SIOCSIWNWID */ + (iw_handler) NULL, /* SIOCGIWNWID */ + (iw_handler) prism54_set_freq, /* SIOCSIWFREQ */ + (iw_handler) prism54_get_freq, /* SIOCGIWFREQ */ + (iw_handler) prism54_set_mode, /* SIOCSIWMODE */ + (iw_handler) prism54_get_mode, /* SIOCGIWMODE */ + (iw_handler) prism54_set_sens, /* SIOCSIWSENS */ + (iw_handler) prism54_get_sens, /* SIOCGIWSENS */ + (iw_handler) NULL, /* SIOCSIWRANGE */ + (iw_handler) prism54_get_range, /* SIOCGIWRANGE */ + (iw_handler) NULL, /* SIOCSIWPRIV */ + (iw_handler) NULL, /* SIOCGIWPRIV */ + (iw_handler) NULL, /* SIOCSIWSTATS */ + (iw_handler) NULL, /* SIOCGIWSTATS */ + prism54_set_spy, /* SIOCSIWSPY */ + iw_handler_get_spy, /* SIOCGIWSPY */ + iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ + iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ + (iw_handler) prism54_set_wap, /* SIOCSIWAP */ + (iw_handler) prism54_get_wap, /* SIOCGIWAP */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* SIOCGIWAPLIST deprecated */ + (iw_handler) prism54_set_scan, /* SIOCSIWSCAN */ + (iw_handler) prism54_get_scan, /* SIOCGIWSCAN */ + (iw_handler) prism54_set_essid, /* SIOCSIWESSID */ + (iw_handler) prism54_get_essid, /* SIOCGIWESSID */ + (iw_handler) prism54_set_nick, /* SIOCSIWNICKN */ + (iw_handler) prism54_get_nick, /* SIOCGIWNICKN */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) prism54_set_rate, /* SIOCSIWRATE */ + (iw_handler) prism54_get_rate, /* SIOCGIWRATE */ + (iw_handler) prism54_set_rts, /* SIOCSIWRTS */ + (iw_handler) prism54_get_rts, /* SIOCGIWRTS */ + (iw_handler) prism54_set_frag, /* SIOCSIWFRAG */ + (iw_handler) prism54_get_frag, /* SIOCGIWFRAG */ + (iw_handler) prism54_set_txpower, /* SIOCSIWTXPOW */ + (iw_handler) prism54_get_txpower, /* SIOCGIWTXPOW */ + (iw_handler) prism54_set_retry, /* SIOCSIWRETRY */ + (iw_handler) prism54_get_retry, /* SIOCGIWRETRY */ + (iw_handler) prism54_set_encode, /* SIOCSIWENCODE */ + (iw_handler) prism54_get_encode, /* SIOCGIWENCODE */ + (iw_handler) NULL, /* SIOCSIWPOWER */ + (iw_handler) NULL, /* SIOCGIWPOWER */ + NULL, /* -- hole -- */ + NULL, /* -- hole -- */ + (iw_handler) prism54_set_genie, /* SIOCSIWGENIE */ + (iw_handler) prism54_get_genie, /* SIOCGIWGENIE */ + (iw_handler) prism54_set_auth, /* SIOCSIWAUTH */ + (iw_handler) prism54_get_auth, /* SIOCGIWAUTH */ + (iw_handler) prism54_set_encodeext, /* SIOCSIWENCODEEXT */ + (iw_handler) prism54_get_encodeext, /* SIOCGIWENCODEEXT */ + NULL, /* SIOCSIWPMKSA */ +}; + +/* The low order bit identify a SET (0) or a GET (1) ioctl. */ + +#define PRISM54_RESET SIOCIWFIRSTPRIV +#define PRISM54_GET_POLICY SIOCIWFIRSTPRIV+1 +#define PRISM54_SET_POLICY SIOCIWFIRSTPRIV+2 +#define PRISM54_GET_MAC SIOCIWFIRSTPRIV+3 +#define PRISM54_ADD_MAC SIOCIWFIRSTPRIV+4 + +#define PRISM54_DEL_MAC SIOCIWFIRSTPRIV+6 + +#define PRISM54_KICK_MAC SIOCIWFIRSTPRIV+8 + +#define PRISM54_KICK_ALL SIOCIWFIRSTPRIV+10 + +#define PRISM54_GET_WPA SIOCIWFIRSTPRIV+11 +#define PRISM54_SET_WPA SIOCIWFIRSTPRIV+12 + +#define PRISM54_DBG_OID SIOCIWFIRSTPRIV+14 +#define PRISM54_DBG_GET_OID SIOCIWFIRSTPRIV+15 +#define PRISM54_DBG_SET_OID SIOCIWFIRSTPRIV+16 + +#define PRISM54_GET_OID SIOCIWFIRSTPRIV+17 +#define PRISM54_SET_OID_U32 SIOCIWFIRSTPRIV+18 +#define PRISM54_SET_OID_STR SIOCIWFIRSTPRIV+20 +#define PRISM54_SET_OID_ADDR SIOCIWFIRSTPRIV+22 + +#define PRISM54_GET_PRISMHDR SIOCIWFIRSTPRIV+23 +#define PRISM54_SET_PRISMHDR SIOCIWFIRSTPRIV+24 + +#define IWPRIV_SET_U32(n,x) { n, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x } +#define IWPRIV_SET_SSID(n,x) { n, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x } +#define IWPRIV_SET_ADDR(n,x) { n, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x } +#define IWPRIV_GET(n,x) { n, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | PRIV_STR_SIZE, "g_"x } + +#define IWPRIV_U32(n,x) IWPRIV_SET_U32(n,x), IWPRIV_GET(n,x) +#define IWPRIV_SSID(n,x) IWPRIV_SET_SSID(n,x), IWPRIV_GET(n,x) +#define IWPRIV_ADDR(n,x) IWPRIV_SET_ADDR(n,x), IWPRIV_GET(n,x) + +/* Note : limited to 128 private ioctls (wireless tools 26) */ + +static const struct iw_priv_args prism54_private_args[] = { +/*{ cmd, set_args, get_args, name } */ + {PRISM54_RESET, 0, 0, "reset"}, + {PRISM54_GET_PRISMHDR, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_prismhdr"}, + {PRISM54_SET_PRISMHDR, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, + "set_prismhdr"}, + {PRISM54_GET_POLICY, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "getPolicy"}, + {PRISM54_SET_POLICY, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, + "setPolicy"}, + {PRISM54_GET_MAC, 0, IW_PRIV_TYPE_ADDR | 64, "getMac"}, + {PRISM54_ADD_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, + "addMac"}, + {PRISM54_DEL_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, + "delMac"}, + {PRISM54_KICK_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, + "kickMac"}, + {PRISM54_KICK_ALL, 0, 0, "kickAll"}, + {PRISM54_GET_WPA, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_wpa"}, + {PRISM54_SET_WPA, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, + "set_wpa"}, + {PRISM54_DBG_OID, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, + "dbg_oid"}, + {PRISM54_DBG_GET_OID, 0, IW_PRIV_TYPE_BYTE | 256, "dbg_get_oid"}, + {PRISM54_DBG_SET_OID, IW_PRIV_TYPE_BYTE | 256, 0, "dbg_set_oid"}, + /* --- sub-ioctls handlers --- */ + {PRISM54_GET_OID, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | PRIV_STR_SIZE, ""}, + {PRISM54_SET_OID_U32, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, ""}, + {PRISM54_SET_OID_STR, + IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 1, 0, ""}, + {PRISM54_SET_OID_ADDR, + IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, ""}, + /* --- sub-ioctls definitions --- */ + IWPRIV_ADDR(GEN_OID_MACADDRESS, "addr"), + IWPRIV_GET(GEN_OID_LINKSTATE, "linkstate"), + IWPRIV_U32(DOT11_OID_BSSTYPE, "bsstype"), + IWPRIV_ADDR(DOT11_OID_BSSID, "bssid"), + IWPRIV_U32(DOT11_OID_STATE, "state"), + IWPRIV_U32(DOT11_OID_AID, "aid"), + + IWPRIV_SSID(DOT11_OID_SSIDOVERRIDE, "ssidoverride"), + + IWPRIV_U32(DOT11_OID_MEDIUMLIMIT, "medlimit"), + IWPRIV_U32(DOT11_OID_BEACONPERIOD, "beacon"), + IWPRIV_U32(DOT11_OID_DTIMPERIOD, "dtimperiod"), + + IWPRIV_U32(DOT11_OID_AUTHENABLE, "authenable"), + IWPRIV_U32(DOT11_OID_PRIVACYINVOKED, "privinvok"), + IWPRIV_U32(DOT11_OID_EXUNENCRYPTED, "exunencrypt"), + + IWPRIV_U32(DOT11_OID_REKEYTHRESHOLD, "rekeythresh"), + + IWPRIV_U32(DOT11_OID_MAXTXLIFETIME, "maxtxlife"), + IWPRIV_U32(DOT11_OID_MAXRXLIFETIME, "maxrxlife"), + IWPRIV_U32(DOT11_OID_ALOFT_FIXEDRATE, "fixedrate"), + IWPRIV_U32(DOT11_OID_MAXFRAMEBURST, "frameburst"), + IWPRIV_U32(DOT11_OID_PSM, "psm"), + + IWPRIV_U32(DOT11_OID_BRIDGELOCAL, "bridge"), + IWPRIV_U32(DOT11_OID_CLIENTS, "clients"), + IWPRIV_U32(DOT11_OID_CLIENTSASSOCIATED, "clientassoc"), + IWPRIV_U32(DOT11_OID_DOT1XENABLE, "dot1xenable"), + IWPRIV_U32(DOT11_OID_ANTENNARX, "rxant"), + IWPRIV_U32(DOT11_OID_ANTENNATX, "txant"), + IWPRIV_U32(DOT11_OID_ANTENNADIVERSITY, "antdivers"), + IWPRIV_U32(DOT11_OID_EDTHRESHOLD, "edthresh"), + IWPRIV_U32(DOT11_OID_PREAMBLESETTINGS, "preamble"), + IWPRIV_GET(DOT11_OID_RATES, "rates"), + IWPRIV_U32(DOT11_OID_OUTPUTPOWER, ".11outpower"), + IWPRIV_GET(DOT11_OID_SUPPORTEDRATES, "supprates"), + IWPRIV_GET(DOT11_OID_SUPPORTEDFREQUENCIES, "suppfreq"), + + IWPRIV_U32(DOT11_OID_NOISEFLOOR, "noisefloor"), + IWPRIV_GET(DOT11_OID_FREQUENCYACTIVITY, "freqactivity"), + IWPRIV_U32(DOT11_OID_NONERPPROTECTION, "nonerpprotec"), + IWPRIV_U32(DOT11_OID_PROFILES, "profile"), + IWPRIV_GET(DOT11_OID_EXTENDEDRATES, "extrates"), + IWPRIV_U32(DOT11_OID_MLMEAUTOLEVEL, "mlmelevel"), + + IWPRIV_GET(DOT11_OID_BSSS, "bsss"), + IWPRIV_GET(DOT11_OID_BSSLIST, "bsslist"), + IWPRIV_U32(OID_INL_MODE, "mode"), + IWPRIV_U32(OID_INL_CONFIG, "config"), + IWPRIV_U32(OID_INL_DOT11D_CONFORMANCE, ".11dconform"), + IWPRIV_GET(OID_INL_PHYCAPABILITIES, "phycapa"), + IWPRIV_U32(OID_INL_OUTPUTPOWER, "outpower"), +}; + +static const iw_handler prism54_private_handler[] = { + (iw_handler) prism54_reset, + (iw_handler) prism54_get_policy, + (iw_handler) prism54_set_policy, + (iw_handler) prism54_get_mac, + (iw_handler) prism54_add_mac, + (iw_handler) NULL, + (iw_handler) prism54_del_mac, + (iw_handler) NULL, + (iw_handler) prism54_kick_mac, + (iw_handler) NULL, + (iw_handler) prism54_kick_all, + (iw_handler) prism54_get_wpa, + (iw_handler) prism54_set_wpa, + (iw_handler) NULL, + (iw_handler) prism54_debug_oid, + (iw_handler) prism54_debug_get_oid, + (iw_handler) prism54_debug_set_oid, + (iw_handler) prism54_get_oid, + (iw_handler) prism54_set_u32, + (iw_handler) NULL, + (iw_handler) prism54_set_raw, + (iw_handler) NULL, + (iw_handler) prism54_set_raw, + (iw_handler) prism54_get_prismhdr, + (iw_handler) prism54_set_prismhdr, +}; + +const struct iw_handler_def prism54_handler_def = { + .num_standard = ARRAY_SIZE(prism54_handler), + .num_private = ARRAY_SIZE(prism54_private_handler), + .num_private_args = ARRAY_SIZE(prism54_private_args), + .standard = (iw_handler *) prism54_handler, + .private = (iw_handler *) prism54_private_handler, + .private_args = (struct iw_priv_args *) prism54_private_args, + .get_wireless_stats = prism54_get_wireless_stats, +}; diff --git a/drivers/net/wireless/intersil/prism54/isl_ioctl.h b/drivers/net/wireless/intersil/prism54/isl_ioctl.h new file mode 100644 index 000000000..842a2549f --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/isl_ioctl.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * (C) 2003 Aurelien Alleaume <slts@free.fr> + * (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef _ISL_IOCTL_H +#define _ISL_IOCTL_H + +#include "islpci_mgt.h" +#include "islpci_dev.h" + +#include <net/iw_handler.h> /* New driver API */ + +#define SUPPORTED_WIRELESS_EXT 19 + +void prism54_mib_init(islpci_private *); + +struct iw_statistics *prism54_get_wireless_stats(struct net_device *); +void prism54_update_stats(struct work_struct *); + +void prism54_acl_init(struct islpci_acl *); +void prism54_acl_clean(struct islpci_acl *); + +void prism54_process_trap(struct work_struct *); + +void prism54_wpa_bss_ie_init(islpci_private *priv); +void prism54_wpa_bss_ie_clean(islpci_private *priv); + +int prism54_set_mac_address(struct net_device *, void *); + +extern const struct iw_handler_def prism54_handler_def; + +#endif /* _ISL_IOCTL_H */ diff --git a/drivers/net/wireless/intersil/prism54/isl_oid.h b/drivers/net/wireless/intersil/prism54/isl_oid.h new file mode 100644 index 000000000..83fec5579 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/isl_oid.h @@ -0,0 +1,504 @@ +/* + * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> + * Copyright (C) 2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#if !defined(_ISL_OID_H) +#define _ISL_OID_H + +/* + * MIB related constant and structure definitions for communicating + * with the device firmware + */ + +struct obj_ssid { + u8 length; + char octets[33]; +} __packed; + +struct obj_key { + u8 type; /* dot11_priv_t */ + u8 length; + char key[32]; +} __packed; + +struct obj_mlme { + u8 address[6]; + u16 id; + u16 state; + u16 code; +} __packed; + +struct obj_mlmeex { + u8 address[6]; + u16 id; + u16 state; + u16 code; + u16 size; + u8 data[0]; +} __packed; + +struct obj_buffer { + u32 size; + u32 addr; /* 32bit bus address */ +} __packed; + +struct obj_bss { + u8 address[6]; + int:16; /* padding */ + + char state; + char reserved; + short age; + + char quality; + char rssi; + + struct obj_ssid ssid; + short channel; + char beacon_period; + char dtim_period; + short capinfo; + short rates; + short basic_rates; + int:16; /* padding */ +} __packed; + +struct obj_bsslist { + u32 nr; + struct obj_bss bsslist[0]; +} __packed; + +struct obj_frequencies { + u16 nr; + u16 mhz[0]; +} __packed; + +struct obj_attachment { + char type; + char reserved; + short id; + short size; + char data[0]; +} __packed; + +/* + * in case everything's ok, the inlined function below will be + * optimized away by the compiler... + */ +static inline void +__bug_on_wrong_struct_sizes(void) +{ + BUILD_BUG_ON(sizeof (struct obj_ssid) != 34); + BUILD_BUG_ON(sizeof (struct obj_key) != 34); + BUILD_BUG_ON(sizeof (struct obj_mlme) != 12); + BUILD_BUG_ON(sizeof (struct obj_mlmeex) != 14); + BUILD_BUG_ON(sizeof (struct obj_buffer) != 8); + BUILD_BUG_ON(sizeof (struct obj_bss) != 60); + BUILD_BUG_ON(sizeof (struct obj_bsslist) != 4); + BUILD_BUG_ON(sizeof (struct obj_frequencies) != 2); +} + +enum dot11_state_t { + DOT11_STATE_NONE = 0, + DOT11_STATE_AUTHING = 1, + DOT11_STATE_AUTH = 2, + DOT11_STATE_ASSOCING = 3, + + DOT11_STATE_ASSOC = 5, + DOT11_STATE_IBSS = 6, + DOT11_STATE_WDS = 7 +}; + +enum dot11_bsstype_t { + DOT11_BSSTYPE_NONE = 0, + DOT11_BSSTYPE_INFRA = 1, + DOT11_BSSTYPE_IBSS = 2, + DOT11_BSSTYPE_ANY = 3 +}; + +enum dot11_auth_t { + DOT11_AUTH_NONE = 0, + DOT11_AUTH_OS = 1, + DOT11_AUTH_SK = 2, + DOT11_AUTH_BOTH = 3 +}; + +enum dot11_mlme_t { + DOT11_MLME_AUTO = 0, + DOT11_MLME_INTERMEDIATE = 1, + DOT11_MLME_EXTENDED = 2 +}; + +enum dot11_priv_t { + DOT11_PRIV_WEP = 0, + DOT11_PRIV_TKIP = 1 +}; + +/* Prism "Nitro" / Frameburst / "Packet Frame Grouping" + * Value is in microseconds. Represents the # microseconds + * the firmware will take to group frames before sending out then out + * together with a CSMA contention. Without this all frames are + * sent with a CSMA contention. + * Bibliography: + * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html + */ +enum dot11_maxframeburst_t { + /* Values for DOT11_OID_MAXFRAMEBURST */ + DOT11_MAXFRAMEBURST_OFF = 0, /* Card firmware default */ + DOT11_MAXFRAMEBURST_MIXED_SAFE = 650, /* 802.11 a,b,g safe */ + DOT11_MAXFRAMEBURST_IDEAL = 1300, /* Theoretical ideal level */ + DOT11_MAXFRAMEBURST_MAX = 5000, /* Use this as max, + * Note: firmware allows for greater values. This is a + * recommended max. I'll update this as I find + * out what the real MAX is. Also note that you don't necessarily + * get better results with a greater value here. + */ +}; + +/* Support for 802.11 long and short frame preambles. + * Long preamble uses 128-bit sync field, 8-bit CRC + * Short preamble uses 56-bit sync field, 16-bit CRC + * + * 802.11a -- not sure, both optionally ? + * 802.11b supports long and optionally short + * 802.11g supports both */ +enum dot11_preamblesettings_t { + DOT11_PREAMBLESETTING_LONG = 0, + /* Allows *only* long 802.11 preambles */ + DOT11_PREAMBLESETTING_SHORT = 1, + /* Allows *only* short 802.11 preambles */ + DOT11_PREAMBLESETTING_DYNAMIC = 2 + /* AutomatiGically set */ +}; + +/* Support for 802.11 slot timing (time between packets). + * + * Long uses 802.11a slot timing (9 usec ?) + * Short uses 802.11b slot timing (20 use ?) */ +enum dot11_slotsettings_t { + DOT11_SLOTSETTINGS_LONG = 0, + /* Allows *only* long 802.11b slot timing */ + DOT11_SLOTSETTINGS_SHORT = 1, + /* Allows *only* long 802.11a slot timing */ + DOT11_SLOTSETTINGS_DYNAMIC = 2 + /* AutomatiGically set */ +}; + +/* All you need to know, ERP is "Extended Rate PHY". + * An Extended Rate PHY (ERP) STA or AP shall support three different + * preamble and header formats: + * Long preamble (refer to above) + * Short preamble (refer to above) + * OFDM preamble ( ? ) + * + * I'm assuming here Protection tells the AP + * to be careful, a STA which cannot handle the long pre-amble + * has joined. + */ +enum do11_nonerpstatus_t { + DOT11_ERPSTAT_NONEPRESENT = 0, + DOT11_ERPSTAT_USEPROTECTION = 1 +}; + +/* (ERP is "Extended Rate PHY") Way to read NONERP is NON-ERP-* + * The key here is DOT11 NON ERP NEVER protects against + * NON ERP STA's. You *don't* want this unless + * you know what you are doing. It means you will only + * get Extended Rate capabilities */ +enum dot11_nonerpprotection_t { + DOT11_NONERP_NEVER = 0, + DOT11_NONERP_ALWAYS = 1, + DOT11_NONERP_DYNAMIC = 2 +}; + +/* Preset OID configuration for 802.11 modes + * Note: DOT11_OID_CW[MIN|MAX] hold the values of the + * DCS MIN|MAX backoff used */ +enum dot11_profile_t { /* And set/allowed values */ + /* Allowed values for DOT11_OID_PROFILES */ + DOT11_PROFILE_B_ONLY = 0, + /* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps + * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC + * DOT11_OID_CWMIN: 31 + * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC + * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_LONG + */ + DOT11_PROFILE_MIXED_G_WIFI = 1, + /* DOT11_OID_RATES: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbs + * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC + * DOT11_OID_CWMIN: 15 + * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC + * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_DYNAMIC + */ + DOT11_PROFILE_MIXED_LONG = 2, /* "Long range" */ + /* Same as Profile MIXED_G_WIFI */ + DOT11_PROFILE_G_ONLY = 3, + /* Same as Profile MIXED_G_WIFI */ + DOT11_PROFILE_TEST = 4, + /* Same as Profile MIXED_G_WIFI except: + * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_SHORT + * DOT11_OID_NONEPROTECTION: DOT11_NOERP_NEVER + * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_SHORT + */ + DOT11_PROFILE_B_WIFI = 5, + /* Same as Profile B_ONLY */ + DOT11_PROFILE_A_ONLY = 6, + /* Same as Profile MIXED_G_WIFI except: + * DOT11_OID_RATES: 6, 9, 12, 18, 24, 36, 48, 54Mbs + */ + DOT11_PROFILE_MIXED_SHORT = 7 + /* Same as MIXED_G_WIFI */ +}; + + +/* The dot11d conformance level configures the 802.11d conformance levels. + * The following conformance levels exist:*/ +enum oid_inl_conformance_t { + OID_INL_CONFORMANCE_NONE = 0, /* Perform active scanning */ + OID_INL_CONFORMANCE_STRICT = 1, /* Strictly adhere to 802.11d */ + OID_INL_CONFORMANCE_FLEXIBLE = 2, /* Use passed 802.11d info to + * determine channel AND/OR just make assumption that active + * channels are valid channels */ +}; + +enum oid_inl_mode_t { + INL_MODE_NONE = -1, + INL_MODE_PROMISCUOUS = 0, + INL_MODE_CLIENT = 1, + INL_MODE_AP = 2, + INL_MODE_SNIFFER = 3 +}; + +enum oid_inl_config_t { + INL_CONFIG_NOTHING = 0x00, + INL_CONFIG_MANUALRUN = 0x01, + INL_CONFIG_FRAMETRAP = 0x02, + INL_CONFIG_RXANNEX = 0x04, + INL_CONFIG_TXANNEX = 0x08, + INL_CONFIG_WDS = 0x10 +}; + +enum oid_inl_phycap_t { + INL_PHYCAP_2400MHZ = 1, + INL_PHYCAP_5000MHZ = 2, + INL_PHYCAP_FAA = 0x80000000, /* Means card supports the FAA switch */ +}; + + +enum oid_num_t { + GEN_OID_MACADDRESS = 0, + GEN_OID_LINKSTATE, + GEN_OID_WATCHDOG, + GEN_OID_MIBOP, + GEN_OID_OPTIONS, + GEN_OID_LEDCONFIG, + + /* 802.11 */ + DOT11_OID_BSSTYPE, + DOT11_OID_BSSID, + DOT11_OID_SSID, + DOT11_OID_STATE, + DOT11_OID_AID, + DOT11_OID_COUNTRYSTRING, + DOT11_OID_SSIDOVERRIDE, + + DOT11_OID_MEDIUMLIMIT, + DOT11_OID_BEACONPERIOD, + DOT11_OID_DTIMPERIOD, + DOT11_OID_ATIMWINDOW, + DOT11_OID_LISTENINTERVAL, + DOT11_OID_CFPPERIOD, + DOT11_OID_CFPDURATION, + + DOT11_OID_AUTHENABLE, + DOT11_OID_PRIVACYINVOKED, + DOT11_OID_EXUNENCRYPTED, + DOT11_OID_DEFKEYID, + DOT11_OID_DEFKEYX, /* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */ + DOT11_OID_STAKEY, + DOT11_OID_REKEYTHRESHOLD, + DOT11_OID_STASC, + + DOT11_OID_PRIVTXREJECTED, + DOT11_OID_PRIVRXPLAIN, + DOT11_OID_PRIVRXFAILED, + DOT11_OID_PRIVRXNOKEY, + + DOT11_OID_RTSTHRESH, + DOT11_OID_FRAGTHRESH, + DOT11_OID_SHORTRETRIES, + DOT11_OID_LONGRETRIES, + DOT11_OID_MAXTXLIFETIME, + DOT11_OID_MAXRXLIFETIME, + DOT11_OID_AUTHRESPTIMEOUT, + DOT11_OID_ASSOCRESPTIMEOUT, + + DOT11_OID_ALOFT_TABLE, + DOT11_OID_ALOFT_CTRL_TABLE, + DOT11_OID_ALOFT_RETREAT, + DOT11_OID_ALOFT_PROGRESS, + DOT11_OID_ALOFT_FIXEDRATE, + DOT11_OID_ALOFT_RSSIGRAPH, + DOT11_OID_ALOFT_CONFIG, + + DOT11_OID_VDCFX, + DOT11_OID_MAXFRAMEBURST, + + DOT11_OID_PSM, + DOT11_OID_CAMTIMEOUT, + DOT11_OID_RECEIVEDTIMS, + DOT11_OID_ROAMPREFERENCE, + + DOT11_OID_BRIDGELOCAL, + DOT11_OID_CLIENTS, + DOT11_OID_CLIENTSASSOCIATED, + DOT11_OID_CLIENTX, /* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */ + + DOT11_OID_CLIENTFIND, + DOT11_OID_WDSLINKADD, + DOT11_OID_WDSLINKREMOVE, + DOT11_OID_EAPAUTHSTA, + DOT11_OID_EAPUNAUTHSTA, + DOT11_OID_DOT1XENABLE, + DOT11_OID_MICFAILURE, + DOT11_OID_REKEYINDICATE, + + DOT11_OID_MPDUTXSUCCESSFUL, + DOT11_OID_MPDUTXONERETRY, + DOT11_OID_MPDUTXMULTIPLERETRIES, + DOT11_OID_MPDUTXFAILED, + DOT11_OID_MPDURXSUCCESSFUL, + DOT11_OID_MPDURXDUPS, + DOT11_OID_RTSSUCCESSFUL, + DOT11_OID_RTSFAILED, + DOT11_OID_ACKFAILED, + DOT11_OID_FRAMERECEIVES, + DOT11_OID_FRAMEERRORS, + DOT11_OID_FRAMEABORTS, + DOT11_OID_FRAMEABORTSPHY, + + DOT11_OID_SLOTTIME, + DOT11_OID_CWMIN, /* MIN DCS backoff */ + DOT11_OID_CWMAX, /* MAX DCS backoff */ + DOT11_OID_ACKWINDOW, + DOT11_OID_ANTENNARX, + DOT11_OID_ANTENNATX, + DOT11_OID_ANTENNADIVERSITY, + DOT11_OID_CHANNEL, + DOT11_OID_EDTHRESHOLD, + DOT11_OID_PREAMBLESETTINGS, + DOT11_OID_RATES, + DOT11_OID_CCAMODESUPPORTED, + DOT11_OID_CCAMODE, + DOT11_OID_RSSIVECTOR, + DOT11_OID_OUTPUTPOWERTABLE, + DOT11_OID_OUTPUTPOWER, + DOT11_OID_SUPPORTEDRATES, + DOT11_OID_FREQUENCY, + DOT11_OID_SUPPORTEDFREQUENCIES, + DOT11_OID_NOISEFLOOR, + DOT11_OID_FREQUENCYACTIVITY, + DOT11_OID_IQCALIBRATIONTABLE, + DOT11_OID_NONERPPROTECTION, + DOT11_OID_SLOTSETTINGS, + DOT11_OID_NONERPTIMEOUT, + DOT11_OID_PROFILES, + DOT11_OID_EXTENDEDRATES, + + DOT11_OID_DEAUTHENTICATE, + DOT11_OID_AUTHENTICATE, + DOT11_OID_DISASSOCIATE, + DOT11_OID_ASSOCIATE, + DOT11_OID_SCAN, + DOT11_OID_BEACON, + DOT11_OID_PROBE, + DOT11_OID_DEAUTHENTICATEEX, + DOT11_OID_AUTHENTICATEEX, + DOT11_OID_DISASSOCIATEEX, + DOT11_OID_ASSOCIATEEX, + DOT11_OID_REASSOCIATE, + DOT11_OID_REASSOCIATEEX, + + DOT11_OID_NONERPSTATUS, + + DOT11_OID_STATIMEOUT, + DOT11_OID_MLMEAUTOLEVEL, + DOT11_OID_BSSTIMEOUT, + DOT11_OID_ATTACHMENT, + DOT11_OID_PSMBUFFER, + + DOT11_OID_BSSS, + DOT11_OID_BSSX, /*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */ + DOT11_OID_BSSFIND, + DOT11_OID_BSSLIST, + + OID_INL_TUNNEL, + OID_INL_MEMADDR, + OID_INL_MEMORY, + OID_INL_MODE, + OID_INL_COMPONENT_NR, + OID_INL_VERSION, + OID_INL_INTERFACE_ID, + OID_INL_COMPONENT_ID, + OID_INL_CONFIG, + OID_INL_DOT11D_CONFORMANCE, + OID_INL_PHYCAPABILITIES, + OID_INL_OUTPUTPOWER, + + OID_NUM_LAST +}; + +#define OID_FLAG_CACHED 0x80 +#define OID_FLAG_TYPE 0x7f + +#define OID_TYPE_U32 0x01 +#define OID_TYPE_SSID 0x02 +#define OID_TYPE_KEY 0x03 +#define OID_TYPE_BUFFER 0x04 +#define OID_TYPE_BSS 0x05 +#define OID_TYPE_BSSLIST 0x06 +#define OID_TYPE_FREQUENCIES 0x07 +#define OID_TYPE_MLME 0x08 +#define OID_TYPE_MLMEEX 0x09 +#define OID_TYPE_ADDR 0x0A +#define OID_TYPE_RAW 0x0B +#define OID_TYPE_ATTACH 0x0C + +/* OID_TYPE_MLMEEX is special because of a variable size field when sending. + * Not yet implemented (not used in driver anyway). + */ + +struct oid_t { + enum oid_num_t oid; + short range; /* to define a range of oid */ + short size; /* max size of the associated data */ + char flags; +}; + +union oid_res_t { + void *ptr; + u32 u; +}; + +#define IWMAX_BITRATES 20 +#define IWMAX_BSS 24 +#define IWMAX_FREQ 30 +#define PRIV_STR_SIZE 1024 + +#endif /* !defined(_ISL_OID_H) */ +/* EOF */ diff --git a/drivers/net/wireless/intersil/prism54/islpci_dev.c b/drivers/net/wireless/intersil/prism54/islpci_dev.c new file mode 100644 index 000000000..1035486b2 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/islpci_dev.c @@ -0,0 +1,963 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> + * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <linux/hardirq.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/sched.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/if_arp.h> + +#include <asm/io.h> + +#include "prismcompat.h" +#include "isl_38xx.h" +#include "isl_ioctl.h" +#include "islpci_dev.h" +#include "islpci_mgt.h" +#include "islpci_eth.h" +#include "oid_mgt.h" + +#define ISL3877_IMAGE_FILE "/*(DEBLOBBED)*/" +#define ISL3886_IMAGE_FILE "/*(DEBLOBBED)*/" +#define ISL3890_IMAGE_FILE "/*(DEBLOBBED)*/" +/*(DEBLOBBED)*/ + +static int prism54_bring_down(islpci_private *); +static int islpci_alloc_memory(islpci_private *); + +/* Temporary dummy MAC address to use until firmware is loaded. + * The idea there is that some tools (such as nameif) may query + * the MAC address before the netdev is 'open'. By using a valid + * OUI prefix, they can process the netdev properly. + * Of course, this is not the final/real MAC address. It doesn't + * matter, as you are suppose to be able to change it anytime via + * ndev->set_mac_address. Jean II */ +static const unsigned char dummy_mac[6] = { 0x00, 0x30, 0xB4, 0x00, 0x00, 0x00 }; + +static int +isl_upload_firmware(islpci_private *priv) +{ + u32 reg, rc; + void __iomem *device_base = priv->device_base; + + /* clear the RAMBoot and the Reset bit */ + reg = readl(device_base + ISL38XX_CTRL_STAT_REG); + reg &= ~ISL38XX_CTRL_STAT_RESET; + reg &= ~ISL38XX_CTRL_STAT_RAMBOOT; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + /* set the Reset bit without reading the register ! */ + reg |= ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + /* clear the Reset bit */ + reg &= ~ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + + /* wait a while for the device to reboot */ + mdelay(50); + + { + const struct firmware *fw_entry = NULL; + long fw_len; + const u32 *fw_ptr; + + rc = reject_firmware(&fw_entry, priv->firmware, PRISM_FW_PDEV); + if (rc) { + printk(KERN_ERR + "%s: reject_firmware() failed for '%s'\n", + "prism54", priv->firmware); + return rc; + } + /* prepare the Direct Memory Base register */ + reg = ISL38XX_DEV_FIRMWARE_ADDRES; + + fw_ptr = (u32 *) fw_entry->data; + fw_len = fw_entry->size; + + if (fw_len % 4) { + printk(KERN_ERR + "%s: firmware '%s' size is not multiple of 32bit, aborting!\n", + "prism54", priv->firmware); + release_firmware(fw_entry); + return -EILSEQ; /* Illegal byte sequence */; + } + + while (fw_len > 0) { + long _fw_len = + (fw_len > + ISL38XX_MEMORY_WINDOW_SIZE) ? + ISL38XX_MEMORY_WINDOW_SIZE : fw_len; + u32 __iomem *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN; + + /* set the card's base address for writing the data */ + isl38xx_w32_flush(device_base, reg, + ISL38XX_DIR_MEM_BASE_REG); + wmb(); /* be paranoid */ + + /* increment the write address for next iteration */ + reg += _fw_len; + fw_len -= _fw_len; + + /* write the data to the Direct Memory Window 32bit-wise */ + /* memcpy_toio() doesn't guarantee 32bit writes :-| */ + while (_fw_len > 0) { + /* use non-swapping writel() */ + __raw_writel(*fw_ptr, dev_fw_ptr); + fw_ptr++, dev_fw_ptr++; + _fw_len -= 4; + } + + /* flush PCI posting */ + (void) readl(device_base + ISL38XX_PCI_POSTING_FLUSH); + wmb(); /* be paranoid again */ + + BUG_ON(_fw_len != 0); + } + + BUG_ON(fw_len != 0); + + /* Firmware version is at offset 40 (also for "newmac") */ + printk(KERN_DEBUG "%s: firmware version: %.8s\n", + priv->ndev->name, fw_entry->data + 40); + + release_firmware(fw_entry); + } + + /* now reset the device + * clear the Reset & ClkRun bit, set the RAMBoot bit */ + reg = readl(device_base + ISL38XX_CTRL_STAT_REG); + reg &= ~ISL38XX_CTRL_STAT_CLKRUN; + reg &= ~ISL38XX_CTRL_STAT_RESET; + reg |= ISL38XX_CTRL_STAT_RAMBOOT; + isl38xx_w32_flush(device_base, reg, ISL38XX_CTRL_STAT_REG); + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + /* set the reset bit latches the host override and RAMBoot bits + * into the device for operation when the reset bit is reset */ + reg |= ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + /* don't do flush PCI posting here! */ + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + /* clear the reset bit should start the whole circus */ + reg &= ~ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + /* don't do flush PCI posting here! */ + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + return 0; +} + +/****************************************************************************** + Device Interrupt Handler +******************************************************************************/ + +irqreturn_t +islpci_interrupt(int irq, void *config) +{ + u32 reg; + islpci_private *priv = config; + struct net_device *ndev = priv->ndev; + void __iomem *device = priv->device_base; + int powerstate = ISL38XX_PSM_POWERSAVE_STATE; + + /* lock the interrupt handler */ + spin_lock(&priv->slock); + + /* received an interrupt request on a shared IRQ line + * first check whether the device is in sleep mode */ + reg = readl(device + ISL38XX_CTRL_STAT_REG); + if (reg & ISL38XX_CTRL_STAT_SLEEPMODE) + /* device is in sleep mode, IRQ was generated by someone else */ + { +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n"); +#endif + spin_unlock(&priv->slock); + return IRQ_NONE; + } + + + /* check whether there is any source of interrupt on the device */ + reg = readl(device + ISL38XX_INT_IDENT_REG); + + /* also check the contents of the Interrupt Enable Register, because this + * will filter out interrupt sources from other devices on the same irq ! */ + reg &= readl(device + ISL38XX_INT_EN_REG); + reg &= ISL38XX_INT_SOURCES; + + if (reg != 0) { + if (islpci_get_state(priv) != PRV_STATE_SLEEP) + powerstate = ISL38XX_PSM_ACTIVE_STATE; + + /* reset the request bits in the Identification register */ + isl38xx_w32_flush(device, reg, ISL38XX_INT_ACK_REG); + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, + "IRQ: Identification register 0x%p 0x%x\n", device, reg); +#endif + + /* check for each bit in the register separately */ + if (reg & ISL38XX_INT_IDENT_UPDATE) { +#if VERBOSE > SHOW_ERROR_MESSAGES + /* Queue has been updated */ + DEBUG(SHOW_TRACING, "IRQ: Update flag\n"); + + DEBUG(SHOW_QUEUE_INDEXES, + "CB drv Qs: [%i][%i][%i][%i][%i][%i]\n", + le32_to_cpu(priv->control_block-> + driver_curr_frag[0]), + le32_to_cpu(priv->control_block-> + driver_curr_frag[1]), + le32_to_cpu(priv->control_block-> + driver_curr_frag[2]), + le32_to_cpu(priv->control_block-> + driver_curr_frag[3]), + le32_to_cpu(priv->control_block-> + driver_curr_frag[4]), + le32_to_cpu(priv->control_block-> + driver_curr_frag[5]) + ); + + DEBUG(SHOW_QUEUE_INDEXES, + "CB dev Qs: [%i][%i][%i][%i][%i][%i]\n", + le32_to_cpu(priv->control_block-> + device_curr_frag[0]), + le32_to_cpu(priv->control_block-> + device_curr_frag[1]), + le32_to_cpu(priv->control_block-> + device_curr_frag[2]), + le32_to_cpu(priv->control_block-> + device_curr_frag[3]), + le32_to_cpu(priv->control_block-> + device_curr_frag[4]), + le32_to_cpu(priv->control_block-> + device_curr_frag[5]) + ); +#endif + + /* cleanup the data low transmit queue */ + islpci_eth_cleanup_transmit(priv, priv->control_block); + + /* device is in active state, update the + * powerstate flag if necessary */ + powerstate = ISL38XX_PSM_ACTIVE_STATE; + + /* check all three queues in priority order + * call the PIMFOR receive function until the + * queue is empty */ + if (isl38xx_in_queue(priv->control_block, + ISL38XX_CB_RX_MGMTQ) != 0) { +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "Received frame in Management Queue\n"); +#endif + islpci_mgt_receive(ndev); + + islpci_mgt_cleanup_transmit(ndev); + + /* Refill slots in receive queue */ + islpci_mgmt_rx_fill(ndev); + + /* no need to trigger the device, next + islpci_mgt_transaction does it */ + } + + while (isl38xx_in_queue(priv->control_block, + ISL38XX_CB_RX_DATA_LQ) != 0) { +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "Received frame in Data Low Queue\n"); +#endif + islpci_eth_receive(priv); + } + + /* check whether the data transmit queues were full */ + if (priv->data_low_tx_full) { + /* check whether the transmit is not full anymore */ + if (ISL38XX_CB_TX_QSIZE - + isl38xx_in_queue(priv->control_block, + ISL38XX_CB_TX_DATA_LQ) >= + ISL38XX_MIN_QTHRESHOLD) { + /* nope, the driver is ready for more network frames */ + netif_wake_queue(priv->ndev); + + /* reset the full flag */ + priv->data_low_tx_full = 0; + } + } + } + + if (reg & ISL38XX_INT_IDENT_INIT) { + /* Device has been initialized */ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "IRQ: Init flag, device initialized\n"); +#endif + wake_up(&priv->reset_done); + } + + if (reg & ISL38XX_INT_IDENT_SLEEP) { + /* Device intends to move to powersave state */ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "IRQ: Sleep flag\n"); +#endif + isl38xx_handle_sleep_request(priv->control_block, + &powerstate, + priv->device_base); + } + + if (reg & ISL38XX_INT_IDENT_WAKEUP) { + /* Device has been woken up to active state */ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "IRQ: Wakeup flag\n"); +#endif + + isl38xx_handle_wakeup(priv->control_block, + &powerstate, priv->device_base); + } + } else { +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n"); +#endif + spin_unlock(&priv->slock); + return IRQ_NONE; + } + + /* sleep -> ready */ + if (islpci_get_state(priv) == PRV_STATE_SLEEP + && powerstate == ISL38XX_PSM_ACTIVE_STATE) + islpci_set_state(priv, PRV_STATE_READY); + + /* !sleep -> sleep */ + if (islpci_get_state(priv) != PRV_STATE_SLEEP + && powerstate == ISL38XX_PSM_POWERSAVE_STATE) + islpci_set_state(priv, PRV_STATE_SLEEP); + + /* unlock the interrupt handler */ + spin_unlock(&priv->slock); + + return IRQ_HANDLED; +} + +/****************************************************************************** + Network Interface Control & Statistical functions +******************************************************************************/ +static int +islpci_open(struct net_device *ndev) +{ + u32 rc; + islpci_private *priv = netdev_priv(ndev); + + /* reset data structures, upload firmware and reset device */ + rc = islpci_reset(priv,1); + if (rc) { + prism54_bring_down(priv); + return rc; /* Returns informative message */ + } + + netif_start_queue(ndev); + + /* Turn off carrier if in STA or Ad-hoc mode. It will be turned on + * once the firmware receives a trap of being associated + * (GEN_OID_LINKSTATE). In other modes (AP or WDS or monitor) we + * should just leave the carrier on as its expected the firmware + * won't send us a trigger. */ + if (priv->iw_mode == IW_MODE_INFRA || priv->iw_mode == IW_MODE_ADHOC) + netif_carrier_off(ndev); + else + netif_carrier_on(ndev); + + return 0; +} + +static int +islpci_close(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + + printk(KERN_DEBUG "%s: islpci_close ()\n", ndev->name); + + netif_stop_queue(ndev); + + return prism54_bring_down(priv); +} + +static int +prism54_bring_down(islpci_private *priv) +{ + void __iomem *device_base = priv->device_base; + u32 reg; + /* we are going to shutdown the device */ + islpci_set_state(priv, PRV_STATE_PREBOOT); + + /* disable all device interrupts in case they weren't */ + isl38xx_disable_interrupts(priv->device_base); + + /* For safety reasons, we may want to ensure that no DMA transfer is + * currently in progress by emptying the TX and RX queues. */ + + /* wait until interrupts have finished executing on other CPUs */ + synchronize_irq(priv->pdev->irq); + + reg = readl(device_base + ISL38XX_CTRL_STAT_REG); + reg &= ~(ISL38XX_CTRL_STAT_RESET | ISL38XX_CTRL_STAT_RAMBOOT); + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + reg |= ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + udelay(ISL38XX_WRITEIO_DELAY); + + /* clear the Reset bit */ + reg &= ~ISL38XX_CTRL_STAT_RESET; + writel(reg, device_base + ISL38XX_CTRL_STAT_REG); + wmb(); + + /* wait a while for the device to reset */ + schedule_timeout_uninterruptible(msecs_to_jiffies(50)); + + return 0; +} + +static int +islpci_upload_fw(islpci_private *priv) +{ + islpci_state_t old_state; + u32 rc; + + old_state = islpci_set_state(priv, PRV_STATE_BOOT); + + printk(KERN_DEBUG "%s: uploading firmware...\n", priv->ndev->name); + + rc = isl_upload_firmware(priv); + if (rc) { + /* error uploading the firmware */ + printk(KERN_ERR "%s: could not upload firmware ('%s')\n", + priv->ndev->name, priv->firmware); + + islpci_set_state(priv, old_state); + return rc; + } + + printk(KERN_DEBUG "%s: firmware upload complete\n", + priv->ndev->name); + + islpci_set_state(priv, PRV_STATE_POSTBOOT); + + return 0; +} + +static int +islpci_reset_if(islpci_private *priv) +{ + long remaining; + int result = -ETIME; + int count; + + DEFINE_WAIT(wait); + prepare_to_wait(&priv->reset_done, &wait, TASK_UNINTERRUPTIBLE); + + /* now the last step is to reset the interface */ + isl38xx_interface_reset(priv->device_base, priv->device_host_address); + islpci_set_state(priv, PRV_STATE_PREINIT); + + for(count = 0; count < 2 && result; count++) { + /* The software reset acknowledge needs about 220 msec here. + * Be conservative and wait for up to one second. */ + + remaining = schedule_timeout_uninterruptible(HZ); + + if(remaining > 0) { + result = 0; + break; + } + + /* If we're here it's because our IRQ hasn't yet gone through. + * Retry a bit more... + */ + printk(KERN_ERR "%s: no 'reset complete' IRQ seen - retrying\n", + priv->ndev->name); + } + + finish_wait(&priv->reset_done, &wait); + + if (result) { + printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name); + return result; + } + + islpci_set_state(priv, PRV_STATE_INIT); + + /* Now that the device is 100% up, let's allow + * for the other interrupts -- + * NOTE: this is not *yet* true since we've only allowed the + * INIT interrupt on the IRQ line. We can perhaps poll + * the IRQ line until we know for sure the reset went through */ + isl38xx_enable_common_interrupts(priv->device_base); + + down_write(&priv->mib_sem); + result = mgt_commit(priv); + if (result) { + printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name); + up_write(&priv->mib_sem); + return result; + } + up_write(&priv->mib_sem); + + islpci_set_state(priv, PRV_STATE_READY); + + printk(KERN_DEBUG "%s: interface reset complete\n", priv->ndev->name); + return 0; +} + +int +islpci_reset(islpci_private *priv, int reload_firmware) +{ + isl38xx_control_block *cb = /* volatile not needed */ + (isl38xx_control_block *) priv->control_block; + unsigned counter; + int rc; + + if (reload_firmware) + islpci_set_state(priv, PRV_STATE_PREBOOT); + else + islpci_set_state(priv, PRV_STATE_POSTBOOT); + + printk(KERN_DEBUG "%s: resetting device...\n", priv->ndev->name); + + /* disable all device interrupts in case they weren't */ + isl38xx_disable_interrupts(priv->device_base); + + /* flush all management queues */ + priv->index_mgmt_tx = 0; + priv->index_mgmt_rx = 0; + + /* clear the indexes in the frame pointer */ + for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) { + cb->driver_curr_frag[counter] = cpu_to_le32(0); + cb->device_curr_frag[counter] = cpu_to_le32(0); + } + + /* reset the mgmt receive queue */ + for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) { + isl38xx_fragment *frag = &cb->rx_data_mgmt[counter]; + frag->size = cpu_to_le16(MGMT_FRAME_SIZE); + frag->flags = 0; + frag->address = cpu_to_le32(priv->mgmt_rx[counter].pci_addr); + } + + for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) { + cb->rx_data_low[counter].address = + cpu_to_le32((u32) priv->pci_map_rx_address[counter]); + } + + /* since the receive queues are filled with empty fragments, now we can + * set the corresponding indexes in the Control Block */ + priv->control_block->driver_curr_frag[ISL38XX_CB_RX_DATA_LQ] = + cpu_to_le32(ISL38XX_CB_RX_QSIZE); + priv->control_block->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] = + cpu_to_le32(ISL38XX_CB_MGMT_QSIZE); + + /* reset the remaining real index registers and full flags */ + priv->free_data_rx = 0; + priv->free_data_tx = 0; + priv->data_low_tx_full = 0; + + if (reload_firmware) { /* Should we load the firmware ? */ + /* now that the data structures are cleaned up, upload + * firmware and reset interface */ + rc = islpci_upload_fw(priv); + if (rc) { + printk(KERN_ERR "%s: islpci_reset: failure\n", + priv->ndev->name); + return rc; + } + } + + /* finally reset interface */ + rc = islpci_reset_if(priv); + if (rc) + printk(KERN_ERR "prism54: Your card/socket may be faulty, or IRQ line too busy :(\n"); + return rc; +} + +/****************************************************************************** + Network device configuration functions +******************************************************************************/ +static int +islpci_alloc_memory(islpci_private *priv) +{ + int counter; + +#if VERBOSE > SHOW_ERROR_MESSAGES + printk(KERN_DEBUG "islpci_alloc_memory\n"); +#endif + + /* remap the PCI device base address to accessible */ + if (!(priv->device_base = + ioremap(pci_resource_start(priv->pdev, 0), + ISL38XX_PCI_MEM_SIZE))) { + /* error in remapping the PCI device memory address range */ + printk(KERN_ERR "PCI memory remapping failed\n"); + return -1; + } + + /* memory layout for consistent DMA region: + * + * Area 1: Control Block for the device interface + * Area 2: Power Save Mode Buffer for temporary frame storage. Be aware that + * the number of supported stations in the AP determines the minimal + * size of the buffer ! + */ + + /* perform the allocation */ + priv->driver_mem_address = pci_alloc_consistent(priv->pdev, + HOST_MEM_BLOCK, + &priv-> + device_host_address); + + if (!priv->driver_mem_address) { + /* error allocating the block of PCI memory */ + printk(KERN_ERR "%s: could not allocate DMA memory, aborting!", + "prism54"); + return -1; + } + + /* assign the Control Block to the first address of the allocated area */ + priv->control_block = + (isl38xx_control_block *) priv->driver_mem_address; + + /* set the Power Save Buffer pointer directly behind the CB */ + priv->device_psm_buffer = + priv->device_host_address + CONTROL_BLOCK_SIZE; + + /* make sure all buffer pointers are initialized */ + for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) { + priv->control_block->driver_curr_frag[counter] = cpu_to_le32(0); + priv->control_block->device_curr_frag[counter] = cpu_to_le32(0); + } + + priv->index_mgmt_rx = 0; + memset(priv->mgmt_rx, 0, sizeof(priv->mgmt_rx)); + memset(priv->mgmt_tx, 0, sizeof(priv->mgmt_tx)); + + /* allocate rx queue for management frames */ + if (islpci_mgmt_rx_fill(priv->ndev) < 0) + goto out_free; + + /* now get the data rx skb's */ + memset(priv->data_low_rx, 0, sizeof (priv->data_low_rx)); + memset(priv->pci_map_rx_address, 0, sizeof (priv->pci_map_rx_address)); + + for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) { + struct sk_buff *skb; + + /* allocate an sk_buff for received data frames storage + * each frame on receive size consists of 1 fragment + * include any required allignment operations */ + if (!(skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2))) { + /* error allocating an sk_buff structure elements */ + printk(KERN_ERR "Error allocating skb.\n"); + skb = NULL; + goto out_free; + } + skb_reserve(skb, (4 - (long) skb->data) & 0x03); + /* add the new allocated sk_buff to the buffer array */ + priv->data_low_rx[counter] = skb; + + /* map the allocated skb data area to pci */ + priv->pci_map_rx_address[counter] = + pci_map_single(priv->pdev, (void *) skb->data, + MAX_FRAGMENT_SIZE_RX + 2, + PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(priv->pdev, + priv->pci_map_rx_address[counter])) { + priv->pci_map_rx_address[counter] = 0; + /* error mapping the buffer to device + accessible memory address */ + printk(KERN_ERR "failed to map skb DMA'able\n"); + goto out_free; + } + } + + prism54_acl_init(&priv->acl); + prism54_wpa_bss_ie_init(priv); + if (mgt_init(priv)) + goto out_free; + + return 0; + out_free: + islpci_free_memory(priv); + return -1; +} + +int +islpci_free_memory(islpci_private *priv) +{ + int counter; + + if (priv->device_base) + iounmap(priv->device_base); + priv->device_base = NULL; + + /* free consistent DMA area... */ + if (priv->driver_mem_address) + pci_free_consistent(priv->pdev, HOST_MEM_BLOCK, + priv->driver_mem_address, + priv->device_host_address); + + /* clear some dangling pointers */ + priv->driver_mem_address = NULL; + priv->device_host_address = 0; + priv->device_psm_buffer = 0; + priv->control_block = NULL; + + /* clean up mgmt rx buffers */ + for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) { + struct islpci_membuf *buf = &priv->mgmt_rx[counter]; + if (buf->pci_addr) + pci_unmap_single(priv->pdev, buf->pci_addr, + buf->size, PCI_DMA_FROMDEVICE); + buf->pci_addr = 0; + kfree(buf->mem); + buf->size = 0; + buf->mem = NULL; + } + + /* clean up data rx buffers */ + for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) { + if (priv->pci_map_rx_address[counter]) + pci_unmap_single(priv->pdev, + priv->pci_map_rx_address[counter], + MAX_FRAGMENT_SIZE_RX + 2, + PCI_DMA_FROMDEVICE); + priv->pci_map_rx_address[counter] = 0; + + if (priv->data_low_rx[counter]) + dev_kfree_skb(priv->data_low_rx[counter]); + priv->data_low_rx[counter] = NULL; + } + + /* Free the access control list and the WPA list */ + prism54_acl_clean(&priv->acl); + prism54_wpa_bss_ie_clean(priv); + mgt_clean(priv); + + return 0; +} + +#if 0 +static void +islpci_set_multicast_list(struct net_device *dev) +{ + /* put device into promisc mode and let network layer handle it */ +} +#endif + +static void islpci_ethtool_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); +} + +static const struct ethtool_ops islpci_ethtool_ops = { + .get_drvinfo = islpci_ethtool_get_drvinfo, +}; + +static const struct net_device_ops islpci_netdev_ops = { + .ndo_open = islpci_open, + .ndo_stop = islpci_close, + .ndo_start_xmit = islpci_eth_transmit, + .ndo_tx_timeout = islpci_eth_tx_timeout, + .ndo_set_mac_address = prism54_set_mac_address, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + +static struct device_type wlan_type = { + .name = "wlan", +}; + +struct net_device * +islpci_setup(struct pci_dev *pdev) +{ + islpci_private *priv; + struct net_device *ndev = alloc_etherdev(sizeof (islpci_private)); + + if (!ndev) + return ndev; + + pci_set_drvdata(pdev, ndev); + SET_NETDEV_DEV(ndev, &pdev->dev); + SET_NETDEV_DEVTYPE(ndev, &wlan_type); + + /* setup the structure members */ + ndev->base_addr = pci_resource_start(pdev, 0); + ndev->irq = pdev->irq; + + /* initialize the function pointers */ + ndev->netdev_ops = &islpci_netdev_ops; + ndev->wireless_handlers = &prism54_handler_def; + ndev->ethtool_ops = &islpci_ethtool_ops; + + /* ndev->set_multicast_list = &islpci_set_multicast_list; */ + ndev->addr_len = ETH_ALEN; + /* Get a non-zero dummy MAC address for nameif. Jean II */ + memcpy(ndev->dev_addr, dummy_mac, ETH_ALEN); + + ndev->watchdog_timeo = ISLPCI_TX_TIMEOUT; + + /* allocate a private device structure to the network device */ + priv = netdev_priv(ndev); + priv->ndev = ndev; + priv->pdev = pdev; + priv->monitor_type = ARPHRD_IEEE80211; + priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ? + priv->monitor_type : ARPHRD_ETHER; + + /* Add pointers to enable iwspy support. */ + priv->wireless_data.spy_data = &priv->spy_data; + ndev->wireless_data = &priv->wireless_data; + + /* save the start and end address of the PCI memory area */ + ndev->mem_start = (unsigned long) priv->device_base; + ndev->mem_end = ndev->mem_start + ISL38XX_PCI_MEM_SIZE; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "PCI Memory remapped to 0x%p\n", priv->device_base); +#endif + + init_waitqueue_head(&priv->reset_done); + + /* init the queue read locks, process wait counter */ + mutex_init(&priv->mgmt_lock); + priv->mgmt_received = NULL; + init_waitqueue_head(&priv->mgmt_wqueue); + mutex_init(&priv->stats_lock); + spin_lock_init(&priv->slock); + + /* init state machine with off#1 state */ + priv->state = PRV_STATE_OFF; + priv->state_off = 1; + + /* initialize workqueue's */ + INIT_WORK(&priv->stats_work, prism54_update_stats); + priv->stats_timestamp = 0; + + INIT_WORK(&priv->reset_task, islpci_do_reset_and_wake); + priv->reset_task_pending = 0; + + /* allocate various memory areas */ + if (islpci_alloc_memory(priv)) + goto do_free_netdev; + + /* select the firmware file depending on the device id */ + switch (pdev->device) { + case 0x3877: + strcpy(priv->firmware, ISL3877_IMAGE_FILE); + break; + + case 0x3886: + strcpy(priv->firmware, ISL3886_IMAGE_FILE); + break; + + default: + strcpy(priv->firmware, ISL3890_IMAGE_FILE); + break; + } + + if (register_netdev(ndev)) { + DEBUG(SHOW_ERROR_MESSAGES, + "ERROR: register_netdev() failed\n"); + goto do_islpci_free_memory; + } + + return ndev; + + do_islpci_free_memory: + islpci_free_memory(priv); + do_free_netdev: + free_netdev(ndev); + priv = NULL; + return NULL; +} + +islpci_state_t +islpci_set_state(islpci_private *priv, islpci_state_t new_state) +{ + islpci_state_t old_state; + + /* lock */ + old_state = priv->state; + + /* this means either a race condition or some serious error in + * the driver code */ + switch (new_state) { + case PRV_STATE_OFF: + priv->state_off++; + default: + priv->state = new_state; + break; + + case PRV_STATE_PREBOOT: + /* there are actually many off-states, enumerated by + * state_off */ + if (old_state == PRV_STATE_OFF) + priv->state_off--; + + /* only if hw_unavailable is zero now it means we either + * were in off#1 state, or came here from + * somewhere else */ + if (!priv->state_off) + priv->state = new_state; + break; + } +#if 0 + printk(KERN_DEBUG "%s: state transition %d -> %d (off#%d)\n", + priv->ndev->name, old_state, new_state, priv->state_off); +#endif + + /* invariants */ + BUG_ON(priv->state_off < 0); + BUG_ON(priv->state_off && (priv->state != PRV_STATE_OFF)); + BUG_ON(!priv->state_off && (priv->state == PRV_STATE_OFF)); + + /* unlock */ + return old_state; +} diff --git a/drivers/net/wireless/intersil/prism54/islpci_dev.h b/drivers/net/wireless/intersil/prism54/islpci_dev.h new file mode 100644 index 000000000..f6f088e05 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/islpci_dev.h @@ -0,0 +1,216 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> + * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * Copyright (C) 2003 Aurelien Alleaume <slts@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef _ISLPCI_DEV_H +#define _ISLPCI_DEV_H + +#include <linux/irqreturn.h> +#include <linux/netdevice.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> +#include <linux/list.h> +#include <linux/mutex.h> + +#include "isl_38xx.h" +#include "isl_oid.h" +#include "islpci_mgt.h" + +/* some states might not be superflous and may be removed when + design is finalized (hvr) */ +typedef enum { + PRV_STATE_OFF = 0, /* this means hw_unavailable is != 0 */ + PRV_STATE_PREBOOT, /* we are in a pre-boot state (empty RAM) */ + PRV_STATE_BOOT, /* boot state (fw upload, run fw) */ + PRV_STATE_POSTBOOT, /* after boot state, need reset now */ + PRV_STATE_PREINIT, /* pre-init state */ + PRV_STATE_INIT, /* init state (restore MIB backup to device) */ + PRV_STATE_READY, /* driver&device are in operational state */ + PRV_STATE_SLEEP /* device in sleep mode */ +} islpci_state_t; + +/* ACL using MAC address */ +struct mac_entry { + struct list_head _list; + char addr[ETH_ALEN]; +}; + +struct islpci_acl { + enum { MAC_POLICY_OPEN=0, MAC_POLICY_ACCEPT=1, MAC_POLICY_REJECT=2 } policy; + struct list_head mac_list; /* a list of mac_entry */ + int size; /* size of queue */ + struct mutex lock; /* accessed in ioctls and trap_work */ +}; + +struct islpci_membuf { + int size; /* size of memory */ + void *mem; /* address of memory as seen by CPU */ + dma_addr_t pci_addr; /* address of memory as seen by device */ +}; + +#define MAX_BSS_WPA_IE_COUNT 64 +#define MAX_WPA_IE_LEN 64 +struct islpci_bss_wpa_ie { + struct list_head list; + unsigned long last_update; + u8 bssid[ETH_ALEN]; + u8 wpa_ie[MAX_WPA_IE_LEN]; + size_t wpa_ie_len; + +}; + +typedef struct { + spinlock_t slock; /* generic spinlock; */ + + u32 priv_oid; + + /* our mib cache */ + u32 iw_mode; + struct rw_semaphore mib_sem; + void **mib; + char nickname[IW_ESSID_MAX_SIZE+1]; + + /* Take care of the wireless stats */ + struct work_struct stats_work; + struct mutex stats_lock; + /* remember when we last updated the stats */ + unsigned long stats_timestamp; + /* The first is accessed under semaphore locking. + * The second is the clean one we return to iwconfig. + */ + struct iw_statistics local_iwstatistics; + struct iw_statistics iwstatistics; + + struct iw_spy_data spy_data; /* iwspy support */ + + struct iw_public_data wireless_data; + + int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */ + + struct islpci_acl acl; + + /* PCI bus allocation & configuration members */ + struct pci_dev *pdev; /* PCI structure information */ + char firmware[33]; + + void __iomem *device_base; /* ioremapped device base address */ + + /* consistent DMA region */ + void *driver_mem_address; /* base DMA address */ + dma_addr_t device_host_address; /* base DMA address (bus address) */ + dma_addr_t device_psm_buffer; /* host memory for PSM buffering (bus address) */ + + /* our network_device structure */ + struct net_device *ndev; + + /* device queue interface members */ + struct isl38xx_cb *control_block; /* device control block + (== driver_mem_address!) */ + + /* Each queue has three indexes: + * free/index_mgmt/data_rx/tx (called index, see below), + * driver_curr_frag, and device_curr_frag (in the control block) + * All indexes are ever-increasing, but interpreted modulo the + * device queue size when used. + * index <= device_curr_frag <= driver_curr_frag at all times + * For rx queues, [index, device_curr_frag) contains fragments + * that the interrupt processing needs to handle (owned by driver). + * [device_curr_frag, driver_curr_frag) is the free space in the + * rx queue, waiting for data (owned by device). The driver + * increments driver_curr_frag to indicate to the device that more + * buffers are available. + * If device_curr_frag == driver_curr_frag, no more rx buffers are + * available, and the rx DMA engine of the device is halted. + * For tx queues, [index, device_curr_frag) contains fragments + * where tx is done; they need to be freed (owned by driver). + * [device_curr_frag, driver_curr_frag) contains the frames + * that are being transferred (owned by device). The driver + * increments driver_curr_frag to indicate that more tx work + * needs to be done. + */ + u32 index_mgmt_rx; /* real index mgmt rx queue */ + u32 index_mgmt_tx; /* read index mgmt tx queue */ + u32 free_data_rx; /* free pointer data rx queue */ + u32 free_data_tx; /* free pointer data tx queue */ + u32 data_low_tx_full; /* full detected flag */ + + /* frame memory buffers for the device queues */ + struct islpci_membuf mgmt_tx[ISL38XX_CB_MGMT_QSIZE]; + struct islpci_membuf mgmt_rx[ISL38XX_CB_MGMT_QSIZE]; + struct sk_buff *data_low_tx[ISL38XX_CB_TX_QSIZE]; + struct sk_buff *data_low_rx[ISL38XX_CB_RX_QSIZE]; + dma_addr_t pci_map_tx_address[ISL38XX_CB_TX_QSIZE]; + dma_addr_t pci_map_rx_address[ISL38XX_CB_RX_QSIZE]; + + /* wait for a reset interrupt */ + wait_queue_head_t reset_done; + + /* used by islpci_mgt_transaction */ + struct mutex mgmt_lock; /* serialize access to mailbox and wqueue */ + struct islpci_mgmtframe *mgmt_received; /* mbox for incoming frame */ + wait_queue_head_t mgmt_wqueue; /* waitqueue for mbox */ + + /* state machine */ + islpci_state_t state; + int state_off; /* enumeration of off-state, if 0 then + * we're not in any off-state */ + + /* WPA stuff */ + int wpa; /* WPA mode enabled */ + struct list_head bss_wpa_list; + int num_bss_wpa; + struct mutex wpa_lock; + u8 wpa_ie[MAX_WPA_IE_LEN]; + size_t wpa_ie_len; + + struct work_struct reset_task; + int reset_task_pending; +} islpci_private; + +static inline islpci_state_t +islpci_get_state(islpci_private *priv) +{ + /* lock */ + return priv->state; + /* unlock */ +} + +islpci_state_t islpci_set_state(islpci_private *priv, islpci_state_t new_state); + +#define ISLPCI_TX_TIMEOUT (2*HZ) + +irqreturn_t islpci_interrupt(int, void *); + +int prism54_post_setup(islpci_private *, int); +int islpci_reset(islpci_private *, int); + +static inline void +islpci_trigger(islpci_private *priv) +{ + isl38xx_trigger_device(islpci_get_state(priv) == PRV_STATE_SLEEP, + priv->device_base); +} + +int islpci_free_memory(islpci_private *); +struct net_device *islpci_setup(struct pci_dev *); + +#define DRV_NAME "prism54" +#define DRV_VERSION "1.2" + +#endif /* _ISLPCI_DEV_H */ diff --git a/drivers/net/wireless/intersil/prism54/islpci_eth.c b/drivers/net/wireless/intersil/prism54/islpci_eth.c new file mode 100644 index 000000000..d83f63320 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/islpci_eth.c @@ -0,0 +1,507 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr> + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <linux/module.h> +#include <linux/gfp.h> + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> +#include <asm/byteorder.h> + +#include "prismcompat.h" +#include "isl_38xx.h" +#include "islpci_eth.h" +#include "islpci_mgt.h" +#include "oid_mgt.h" + +/****************************************************************************** + Network Interface functions +******************************************************************************/ +void +islpci_eth_cleanup_transmit(islpci_private *priv, + isl38xx_control_block *control_block) +{ + struct sk_buff *skb; + u32 index; + + /* compare the control block read pointer with the free pointer */ + while (priv->free_data_tx != + le32_to_cpu(control_block-> + device_curr_frag[ISL38XX_CB_TX_DATA_LQ])) { + /* read the index of the first fragment to be freed */ + index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE; + + /* check for holes in the arrays caused by multi fragment frames + * searching for the last fragment of a frame */ + if (priv->pci_map_tx_address[index]) { + /* entry is the last fragment of a frame + * free the skb structure and unmap pci memory */ + skb = priv->data_low_tx[index]; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "cleanup skb %p skb->data %p skb->len %u truesize %u\n ", + skb, skb->data, skb->len, skb->truesize); +#endif + + pci_unmap_single(priv->pdev, + priv->pci_map_tx_address[index], + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + skb = NULL; + } + /* increment the free data low queue pointer */ + priv->free_data_tx++; + } +} + +netdev_tx_t +islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + isl38xx_control_block *cb = priv->control_block; + u32 index; + dma_addr_t pci_map_address; + int frame_size; + isl38xx_fragment *fragment; + int offset; + struct sk_buff *newskb; + int newskb_offset; + unsigned long flags; + unsigned char wds_mac[6]; + u32 curr_frag; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit\n"); +#endif + + /* lock the driver code */ + spin_lock_irqsave(&priv->slock, flags); + + /* check whether the destination queue has enough fragments for the frame */ + curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]); + if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) { + printk(KERN_ERR "%s: transmit device queue full when awake\n", + ndev->name); + netif_stop_queue(ndev); + + /* trigger the device */ + isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE, + ISL38XX_DEV_INT_REG); + udelay(ISL38XX_WRITEIO_DELAY); + goto drop_free; + } + /* Check alignment and WDS frame formatting. The start of the packet should + * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes + * and add WDS address information */ + if (likely(((long) skb->data & 0x03) | init_wds)) { + /* get the number of bytes to add and re-align */ + offset = (4 - (long) skb->data) & 0x03; + offset += init_wds ? 6 : 0; + + /* check whether the current skb can be used */ + if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) { + unsigned char *src = skb->data; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "skb offset %i wds %i\n", offset, + init_wds); +#endif + + /* align the buffer on 4-byte boundary */ + skb_reserve(skb, (4 - (long) skb->data) & 0x03); + if (init_wds) { + /* wds requires an additional address field of 6 bytes */ + skb_put(skb, 6); +#ifdef ISLPCI_ETH_DEBUG + printk("islpci_eth_transmit:wds_mac\n"); +#endif + memmove(skb->data + 6, src, skb->len); + skb_copy_to_linear_data(skb, wds_mac, 6); + } else { + memmove(skb->data, src, skb->len); + } + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "memmove %p %p %i\n", skb->data, + src, skb->len); +#endif + } else { + newskb = + dev_alloc_skb(init_wds ? skb->len + 6 : skb->len); + if (unlikely(newskb == NULL)) { + printk(KERN_ERR "%s: Cannot allocate skb\n", + ndev->name); + goto drop_free; + } + newskb_offset = (4 - (long) newskb->data) & 0x03; + + /* Check if newskb->data is aligned */ + if (newskb_offset) + skb_reserve(newskb, newskb_offset); + + skb_put(newskb, init_wds ? skb->len + 6 : skb->len); + if (init_wds) { + skb_copy_from_linear_data(skb, + newskb->data + 6, + skb->len); + skb_copy_to_linear_data(newskb, wds_mac, 6); +#ifdef ISLPCI_ETH_DEBUG + printk("islpci_eth_transmit:wds_mac\n"); +#endif + } else + skb_copy_from_linear_data(skb, newskb->data, + skb->len); + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "memcpy %p %p %i wds %i\n", + newskb->data, skb->data, skb->len, init_wds); +#endif + + newskb->dev = skb->dev; + dev_kfree_skb_irq(skb); + skb = newskb; + } + } + /* display the buffer contents for debugging */ +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_BUFFER_CONTENTS, "\ntx %p ", skb->data); + display_buffer((char *) skb->data, skb->len); +#endif + + /* map the skb buffer to pci memory for DMA operation */ + pci_map_address = pci_map_single(priv->pdev, + (void *) skb->data, skb->len, + PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(priv->pdev, pci_map_address)) { + printk(KERN_WARNING "%s: cannot map buffer to PCI\n", + ndev->name); + goto drop_free; + } + /* Place the fragment in the control block structure. */ + index = curr_frag % ISL38XX_CB_TX_QSIZE; + fragment = &cb->tx_data_low[index]; + + priv->pci_map_tx_address[index] = pci_map_address; + /* store the skb address for future freeing */ + priv->data_low_tx[index] = skb; + /* set the proper fragment start address and size information */ + frame_size = skb->len; + fragment->size = cpu_to_le16(frame_size); + fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */ + fragment->address = cpu_to_le32(pci_map_address); + curr_frag++; + + /* The fragment address in the control block must have been + * written before announcing the frame buffer to device. */ + wmb(); + cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ] = cpu_to_le32(curr_frag); + + if (curr_frag - priv->free_data_tx + ISL38XX_MIN_QTHRESHOLD + > ISL38XX_CB_TX_QSIZE) { + /* stop sends from upper layers */ + netif_stop_queue(ndev); + + /* set the full flag for the transmission queue */ + priv->data_low_tx_full = 1; + } + + ndev->stats.tx_packets++; + ndev->stats.tx_bytes += skb->len; + + /* trigger the device */ + islpci_trigger(priv); + + /* unlock the driver code */ + spin_unlock_irqrestore(&priv->slock, flags); + + return NETDEV_TX_OK; + + drop_free: + ndev->stats.tx_dropped++; + spin_unlock_irqrestore(&priv->slock, flags); + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +static inline int +islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb) +{ + /* The card reports full 802.11 packets but with a 20 bytes + * header and without the FCS. But there a is a bit that + * indicates if the packet is corrupted :-) */ + struct rfmon_header *hdr = (struct rfmon_header *) (*skb)->data; + + if (hdr->flags & 0x01) + /* This one is bad. Drop it ! */ + return -1; + if (priv->ndev->type == ARPHRD_IEEE80211_PRISM) { + struct avs_80211_1_header *avs; + /* extract the relevant data from the header */ + u32 clock = le32_to_cpu(hdr->clock); + u8 rate = hdr->rate; + u16 freq = le16_to_cpu(hdr->freq); + u8 rssi = hdr->rssi; + + skb_pull(*skb, sizeof (struct rfmon_header)); + + if (skb_headroom(*skb) < sizeof (struct avs_80211_1_header)) { + struct sk_buff *newskb = skb_copy_expand(*skb, + sizeof (struct + avs_80211_1_header), + 0, GFP_ATOMIC); + if (newskb) { + dev_kfree_skb_irq(*skb); + *skb = newskb; + } else + return -1; + /* This behavior is not very subtile... */ + } + + /* make room for the new header and fill it. */ + avs = + (struct avs_80211_1_header *) skb_push(*skb, + sizeof (struct + avs_80211_1_header)); + + avs->version = cpu_to_be32(P80211CAPTURE_VERSION); + avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header)); + avs->mactime = cpu_to_be64(clock); + avs->hosttime = cpu_to_be64(jiffies); + avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */ + avs->channel = cpu_to_be32(channel_of_freq(freq)); + avs->datarate = cpu_to_be32(rate * 5); + avs->antenna = cpu_to_be32(0); /*unknown */ + avs->priority = cpu_to_be32(0); /*unknown */ + avs->ssi_type = cpu_to_be32(3); /*2: dBm, 3: raw RSSI */ + avs->ssi_signal = cpu_to_be32(rssi & 0x7f); + avs->ssi_noise = cpu_to_be32(priv->local_iwstatistics.qual.noise); /*better than 'undefined', I assume */ + avs->preamble = cpu_to_be32(0); /*unknown */ + avs->encoding = cpu_to_be32(0); /*unknown */ + } else + skb_pull(*skb, sizeof (struct rfmon_header)); + + (*skb)->protocol = htons(ETH_P_802_2); + skb_reset_mac_header(*skb); + (*skb)->pkt_type = PACKET_OTHERHOST; + + return 0; +} + +int +islpci_eth_receive(islpci_private *priv) +{ + struct net_device *ndev = priv->ndev; + isl38xx_control_block *control_block = priv->control_block; + struct sk_buff *skb; + u16 size; + u32 index, offset; + unsigned char *src; + int discard = 0; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive\n"); +#endif + + /* the device has written an Ethernet frame in the data area + * of the sk_buff without updating the structure, do it now */ + index = priv->free_data_rx % ISL38XX_CB_RX_QSIZE; + size = le16_to_cpu(control_block->rx_data_low[index].size); + skb = priv->data_low_rx[index]; + offset = ((unsigned long) + le32_to_cpu(control_block->rx_data_low[index].address) - + (unsigned long) skb->data) & 3; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n ", + control_block->rx_data_low[priv->free_data_rx].address, skb->data, + skb->len, offset, skb->truesize); +#endif + + /* delete the streaming DMA mapping before processing the skb */ + pci_unmap_single(priv->pdev, + priv->pci_map_rx_address[index], + MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE); + + /* update the skb structure and align the buffer */ + skb_put(skb, size); + if (offset) { + /* shift the buffer allocation offset bytes to get the right frame */ + skb_pull(skb, 2); + skb_put(skb, 2); + } +#if VERBOSE > SHOW_ERROR_MESSAGES + /* display the buffer contents for debugging */ + DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data); + display_buffer((char *) skb->data, skb->len); +#endif + + /* check whether WDS is enabled and whether the data frame is a WDS frame */ + + if (init_wds) { + /* WDS enabled, check for the wds address on the first 6 bytes of the buffer */ + src = skb->data + 6; + memmove(skb->data, src, skb->len - 6); + skb_trim(skb, skb->len - 6); + } +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Fragment size %i in skb at %p\n", size, skb); + DEBUG(SHOW_TRACING, "Skb data at %p, length %i\n", skb->data, skb->len); + + /* display the buffer contents for debugging */ + DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data); + display_buffer((char *) skb->data, skb->len); +#endif + /* take care of monitor mode and spy monitoring. */ + if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) { + skb->dev = ndev; + discard = islpci_monitor_rx(priv, &skb); + } else { + if (unlikely(skb->data[2 * ETH_ALEN] == 0)) { + /* The packet has a rx_annex. Read it for spy monitoring, Then + * remove it, while keeping the 2 leading MAC addr. + */ + struct iw_quality wstats; + struct rx_annex_header *annex = + (struct rx_annex_header *) skb->data; + wstats.level = annex->rfmon.rssi; + /* The noise value can be a bit outdated if nobody's + * reading wireless stats... */ + wstats.noise = priv->local_iwstatistics.qual.noise; + wstats.qual = wstats.level - wstats.noise; + wstats.updated = 0x07; + /* Update spy records */ + wireless_spy_update(ndev, annex->addr2, &wstats); + + skb_copy_from_linear_data(skb, + (skb->data + + sizeof(struct rfmon_header)), + 2 * ETH_ALEN); + skb_pull(skb, sizeof (struct rfmon_header)); + } + skb->protocol = eth_type_trans(skb, ndev); + } + skb->ip_summed = CHECKSUM_NONE; + ndev->stats.rx_packets++; + ndev->stats.rx_bytes += size; + + /* deliver the skb to the network layer */ +#ifdef ISLPCI_ETH_DEBUG + printk + ("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", + skb->data[0], skb->data[1], skb->data[2], skb->data[3], + skb->data[4], skb->data[5]); +#endif + if (unlikely(discard)) { + dev_kfree_skb_irq(skb); + skb = NULL; + } else + netif_rx(skb); + + /* increment the read index for the rx data low queue */ + priv->free_data_rx++; + + /* add one or more sk_buff structures */ + while (index = + le32_to_cpu(control_block-> + driver_curr_frag[ISL38XX_CB_RX_DATA_LQ]), + index - priv->free_data_rx < ISL38XX_CB_RX_QSIZE) { + /* allocate an sk_buff for received data frames storage + * include any required allignment operations */ + skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2); + if (unlikely(skb == NULL)) { + /* error allocating an sk_buff structure elements */ + DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb\n"); + break; + } + skb_reserve(skb, (4 - (long) skb->data) & 0x03); + /* store the new skb structure pointer */ + index = index % ISL38XX_CB_RX_QSIZE; + priv->data_low_rx[index] = skb; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, + "new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n ", + skb, skb->data, skb->len, index, skb->truesize); +#endif + + /* set the streaming DMA mapping for proper PCI bus operation */ + priv->pci_map_rx_address[index] = + pci_map_single(priv->pdev, (void *) skb->data, + MAX_FRAGMENT_SIZE_RX + 2, + PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(priv->pdev, + priv->pci_map_rx_address[index])) { + /* error mapping the buffer to device accessible memory address */ + DEBUG(SHOW_ERROR_MESSAGES, + "Error mapping DMA address\n"); + + /* free the skbuf structure before aborting */ + dev_kfree_skb_irq(skb); + skb = NULL; + break; + } + /* update the fragment address */ + control_block->rx_data_low[index].address = + cpu_to_le32((u32)priv->pci_map_rx_address[index]); + wmb(); + + /* increment the driver read pointer */ + le32_add_cpu(&control_block-> + driver_curr_frag[ISL38XX_CB_RX_DATA_LQ], 1); + } + + /* trigger the device */ + islpci_trigger(priv); + + return 0; +} + +void +islpci_do_reset_and_wake(struct work_struct *work) +{ + islpci_private *priv = container_of(work, islpci_private, reset_task); + + islpci_reset(priv, 1); + priv->reset_task_pending = 0; + smp_wmb(); + netif_wake_queue(priv->ndev); +} + +void +islpci_eth_tx_timeout(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + + /* increment the transmit error counter */ + ndev->stats.tx_errors++; + + if (!priv->reset_task_pending) { + printk(KERN_WARNING + "%s: tx_timeout, scheduling reset", ndev->name); + netif_stop_queue(ndev); + priv->reset_task_pending = 1; + schedule_work(&priv->reset_task); + } else { + printk(KERN_WARNING + "%s: tx_timeout, waiting for reset", ndev->name); + } +} diff --git a/drivers/net/wireless/intersil/prism54/islpci_eth.h b/drivers/net/wireless/intersil/prism54/islpci_eth.h new file mode 100644 index 000000000..80f50f1bc --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/islpci_eth.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef _ISLPCI_ETH_H +#define _ISLPCI_ETH_H + +#include "isl_38xx.h" +#include "islpci_dev.h" + +struct rfmon_header { + __le16 unk0; /* = 0x0000 */ + __le16 length; /* = 0x1400 */ + __le32 clock; /* 1MHz clock */ + u8 flags; + u8 unk1; + u8 rate; + u8 unk2; + __le16 freq; + __le16 unk3; + u8 rssi; + u8 padding[3]; +} __packed; + +struct rx_annex_header { + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + struct rfmon_header rfmon; +} __packed; + +/* wlan-ng (and hopefully others) AVS header, version one. Fields in + * network byte order. */ +#define P80211CAPTURE_VERSION 0x80211001 + +struct avs_80211_1_header { + __be32 version; + __be32 length; + __be64 mactime; + __be64 hosttime; + __be32 phytype; + __be32 channel; + __be32 datarate; + __be32 antenna; + __be32 priority; + __be32 ssi_type; + __be32 ssi_signal; + __be32 ssi_noise; + __be32 preamble; + __be32 encoding; +}; + +void islpci_eth_cleanup_transmit(islpci_private *, isl38xx_control_block *); +netdev_tx_t islpci_eth_transmit(struct sk_buff *, struct net_device *); +int islpci_eth_receive(islpci_private *); +void islpci_eth_tx_timeout(struct net_device *); +void islpci_do_reset_and_wake(struct work_struct *); + +#endif /* _ISL_GEN_H */ diff --git a/drivers/net/wireless/intersil/prism54/islpci_hotplug.c b/drivers/net/wireless/intersil/prism54/islpci_hotplug.c new file mode 100644 index 000000000..300c846ea --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/islpci_hotplug.c @@ -0,0 +1,339 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/init.h> /* For __init, __exit */ +#include <linux/dma-mapping.h> + +#include "prismcompat.h" +#include "islpci_dev.h" +#include "islpci_mgt.h" /* for pc_debug */ +#include "isl_oid.h" + +MODULE_AUTHOR("[Intersil] R.Bastings and W.Termorshuizen, The prism54.org Development Team <prism54-devel@prism54.org>"); +MODULE_DESCRIPTION("The Prism54 802.11 Wireless LAN adapter"); +MODULE_LICENSE("GPL"); + +static int init_pcitm = 0; +module_param(init_pcitm, int, 0); + +/* In this order: vendor, device, subvendor, subdevice, class, class_mask, + * driver_data + * If you have an update for this please contact prism54-devel@prism54.org + * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */ +static const struct pci_device_id prism54_id_tbl[] = { + /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ + { + 0x1260, 0x3890, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, 0 + }, + + /* 3COM 3CRWE154G72 Wireless LAN adapter */ + { + PCI_VDEVICE(3COM, 0x6001), 0 + }, + + /* Intersil PRISM Indigo Wireless LAN adapter */ + { + 0x1260, 0x3877, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, 0 + }, + + /* Intersil PRISM Javelin/Xbow Wireless LAN adapter */ + { + 0x1260, 0x3886, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, 0 + }, + + /* End of list */ + {0,0,0,0,0,0,0} +}; + +/* register the device with the Hotplug facilities of the kernel */ +MODULE_DEVICE_TABLE(pci, prism54_id_tbl); + +static int prism54_probe(struct pci_dev *, const struct pci_device_id *); +static void prism54_remove(struct pci_dev *); +static int prism54_suspend(struct pci_dev *, pm_message_t state); +static int prism54_resume(struct pci_dev *); + +static struct pci_driver prism54_driver = { + .name = DRV_NAME, + .id_table = prism54_id_tbl, + .probe = prism54_probe, + .remove = prism54_remove, + .suspend = prism54_suspend, + .resume = prism54_resume, +}; + +/****************************************************************************** + Module initialization functions +******************************************************************************/ + +static int +prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct net_device *ndev; + u8 latency_tmr; + u32 mem_addr; + islpci_private *priv; + int rvalue; + + /* Enable the pci device */ + if (pci_enable_device(pdev)) { + printk(KERN_ERR "%s: pci_enable_device() failed.\n", DRV_NAME); + return -ENODEV; + } + + /* check whether the latency timer is set correctly */ + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency_tmr); +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "latency timer: %x\n", latency_tmr); +#endif + if (latency_tmr < PCIDEVICE_LATENCY_TIMER_MIN) { + /* set the latency timer */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, + PCIDEVICE_LATENCY_TIMER_VAL); + } + + /* enable PCI DMA */ + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { + printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME); + goto do_pci_disable_device; + } + + /* 0x40 is the programmable timer to configure the response timeout (TRDY_TIMEOUT) + * 0x41 is the programmable timer to configure the retry timeout (RETRY_TIMEOUT) + * The RETRY_TIMEOUT is used to set the number of retries that the core, as a + * Master, will perform before abandoning a cycle. The default value for + * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new + * devices. A write of zero to the RETRY_TIMEOUT register disables this + * function to allow use with any non-compliant legacy devices that may + * execute more retries. + * + * Writing zero to both these two registers will disable both timeouts and + * *can* solve problems caused by devices that are slow to respond. + * Make this configurable - MSW + */ + if ( init_pcitm >= 0 ) { + pci_write_config_byte(pdev, 0x40, (u8)init_pcitm); + pci_write_config_byte(pdev, 0x41, (u8)init_pcitm); + } else { + printk(KERN_INFO "PCI TRDY/RETRY unchanged\n"); + } + + /* request the pci device I/O regions */ + rvalue = pci_request_regions(pdev, DRV_NAME); + if (rvalue) { + printk(KERN_ERR "%s: pci_request_regions failure (rc=%d)\n", + DRV_NAME, rvalue); + goto do_pci_disable_device; + } + + /* check if the memory window is indeed set */ + rvalue = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &mem_addr); + if (rvalue || !mem_addr) { + printk(KERN_ERR "%s: PCI device memory region not configured; fix your BIOS or CardBus bridge/drivers\n", + DRV_NAME); + goto do_pci_release_regions; + } + + /* enable PCI bus-mastering */ + DEBUG(SHOW_TRACING, "%s: pci_set_master(pdev)\n", DRV_NAME); + pci_set_master(pdev); + + /* enable MWI */ + pci_try_set_mwi(pdev); + + /* setup the network device interface and its structure */ + if (!(ndev = islpci_setup(pdev))) { + /* error configuring the driver as a network device */ + printk(KERN_ERR "%s: could not configure network device\n", + DRV_NAME); + goto do_pci_clear_mwi; + } + + priv = netdev_priv(ndev); + islpci_set_state(priv, PRV_STATE_PREBOOT); /* we are attempting to boot */ + + /* card is in unknown state yet, might have some interrupts pending */ + isl38xx_disable_interrupts(priv->device_base); + + /* request for the interrupt before uploading the firmware */ + rvalue = request_irq(pdev->irq, islpci_interrupt, + IRQF_SHARED, ndev->name, priv); + + if (rvalue) { + /* error, could not hook the handler to the irq */ + printk(KERN_ERR "%s: could not install IRQ handler\n", + ndev->name); + goto do_unregister_netdev; + } + + /* firmware upload is triggered in islpci_open */ + + return 0; + + do_unregister_netdev: + unregister_netdev(ndev); + islpci_free_memory(priv); + free_netdev(ndev); + priv = NULL; + do_pci_clear_mwi: + pci_clear_mwi(pdev); + do_pci_release_regions: + pci_release_regions(pdev); + do_pci_disable_device: + pci_disable_device(pdev); + return -EIO; +} + +/* set by cleanup_module */ +static volatile int __in_cleanup_module = 0; + +/* this one removes one(!!) instance only */ +static void +prism54_remove(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; + BUG_ON(!priv); + + if (!__in_cleanup_module) { + printk(KERN_DEBUG "%s: hot unplug detected\n", ndev->name); + islpci_set_state(priv, PRV_STATE_OFF); + } + + printk(KERN_DEBUG "%s: removing device\n", ndev->name); + + unregister_netdev(ndev); + + /* free the interrupt request */ + + if (islpci_get_state(priv) != PRV_STATE_OFF) { + isl38xx_disable_interrupts(priv->device_base); + islpci_set_state(priv, PRV_STATE_OFF); + /* This bellow causes a lockup at rmmod time. It might be + * because some interrupts still linger after rmmod time, + * see bug #17 */ + /* pci_set_power_state(pdev, 3);*/ /* try to power-off */ + } + + free_irq(pdev->irq, priv); + + /* free the PCI memory and unmap the remapped page */ + islpci_free_memory(priv); + + free_netdev(ndev); + priv = NULL; + + pci_clear_mwi(pdev); + + pci_release_regions(pdev); + + pci_disable_device(pdev); +} + +static int +prism54_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; + BUG_ON(!priv); + + + pci_save_state(pdev); + + /* tell the device not to trigger interrupts for now... */ + isl38xx_disable_interrupts(priv->device_base); + + /* from now on assume the hardware was already powered down + and don't touch it anymore */ + islpci_set_state(priv, PRV_STATE_OFF); + + netif_stop_queue(ndev); + netif_device_detach(ndev); + + return 0; +} + +static int +prism54_resume(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + islpci_private *priv = ndev ? netdev_priv(ndev) : NULL; + int err; + + BUG_ON(!priv); + + printk(KERN_NOTICE "%s: got resume request\n", ndev->name); + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s: pci_enable_device failed on resume\n", + ndev->name); + return err; + } + + pci_restore_state(pdev); + + /* alright let's go into the PREBOOT state */ + islpci_reset(priv, 1); + + netif_device_attach(ndev); + netif_start_queue(ndev); + + return 0; +} + +static int __init +prism54_module_init(void) +{ + printk(KERN_INFO "Loaded %s driver, version %s\n", + DRV_NAME, DRV_VERSION); + + __bug_on_wrong_struct_sizes (); + + return pci_register_driver(&prism54_driver); +} + +/* by the time prism54_module_exit() terminates, as a postcondition + * all instances will have been destroyed by calls to + * prism54_remove() */ +static void __exit +prism54_module_exit(void) +{ + __in_cleanup_module = 1; + + pci_unregister_driver(&prism54_driver); + + printk(KERN_INFO "Unloaded %s driver\n", DRV_NAME); + + __in_cleanup_module = 0; +} + +/* register entry points */ +module_init(prism54_module_init); +module_exit(prism54_module_exit); +/* EOF */ diff --git a/drivers/net/wireless/intersil/prism54/islpci_mgt.c b/drivers/net/wireless/intersil/prism54/islpci_mgt.c new file mode 100644 index 000000000..53d7a1705 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/islpci_mgt.c @@ -0,0 +1,502 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright 2004 Jens Maurer <Jens.Maurer@gmx.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <linux/netdevice.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/sched.h> +#include <linux/slab.h> + +#include <asm/io.h> +#include <linux/if_arp.h> + +#include "prismcompat.h" +#include "isl_38xx.h" +#include "islpci_mgt.h" +#include "isl_oid.h" /* additional types and defs for isl38xx fw */ +#include "isl_ioctl.h" + +#include <net/iw_handler.h> + +/****************************************************************************** + Global variable definition section +******************************************************************************/ +int pc_debug = VERBOSE; +module_param(pc_debug, int, 0); + +/****************************************************************************** + Driver general functions +******************************************************************************/ +#if VERBOSE > SHOW_ERROR_MESSAGES +void +display_buffer(char *buffer, int length) +{ + if ((pc_debug & SHOW_BUFFER_CONTENTS) == 0) + return; + + while (length > 0) { + printk("[%02x]", *buffer & 255); + length--; + buffer++; + } + + printk("\n"); +} +#endif + +/***************************************************************************** + Queue handling for management frames +******************************************************************************/ + +/* + * Helper function to create a PIMFOR management frame header. + */ +static void +pimfor_encode_header(int operation, u32 oid, u32 length, pimfor_header_t *h) +{ + h->version = PIMFOR_VERSION; + h->operation = operation; + h->device_id = PIMFOR_DEV_ID_MHLI_MIB; + h->flags = 0; + h->oid = cpu_to_be32(oid); + h->length = cpu_to_be32(length); +} + +/* + * Helper function to analyze a PIMFOR management frame header. + */ +static pimfor_header_t * +pimfor_decode_header(void *data, int len) +{ + pimfor_header_t *h = data; + + while ((void *) h < data + len) { + if (h->flags & PIMFOR_FLAG_LITTLE_ENDIAN) { + le32_to_cpus(&h->oid); + le32_to_cpus(&h->length); + } else { + be32_to_cpus(&h->oid); + be32_to_cpus(&h->length); + } + if (h->oid != OID_INL_TUNNEL) + return h; + h++; + } + return NULL; +} + +/* + * Fill the receive queue for management frames with fresh buffers. + */ +int +islpci_mgmt_rx_fill(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + isl38xx_control_block *cb = /* volatile not needed */ + (isl38xx_control_block *) priv->control_block; + u32 curr = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ]); + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill\n"); +#endif + + while (curr - priv->index_mgmt_rx < ISL38XX_CB_MGMT_QSIZE) { + u32 index = curr % ISL38XX_CB_MGMT_QSIZE; + struct islpci_membuf *buf = &priv->mgmt_rx[index]; + isl38xx_fragment *frag = &cb->rx_data_mgmt[index]; + + if (buf->mem == NULL) { + buf->mem = kmalloc(MGMT_FRAME_SIZE, GFP_ATOMIC); + if (!buf->mem) + return -ENOMEM; + buf->size = MGMT_FRAME_SIZE; + } + if (buf->pci_addr == 0) { + buf->pci_addr = pci_map_single(priv->pdev, buf->mem, + MGMT_FRAME_SIZE, + PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(priv->pdev, buf->pci_addr)) { + printk(KERN_WARNING + "Failed to make memory DMA'able.\n"); + return -ENOMEM; + } + } + + /* be safe: always reset control block information */ + frag->size = cpu_to_le16(MGMT_FRAME_SIZE); + frag->flags = 0; + frag->address = cpu_to_le32(buf->pci_addr); + curr++; + + /* The fragment address in the control block must have + * been written before announcing the frame buffer to + * device */ + wmb(); + cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] = cpu_to_le32(curr); + } + return 0; +} + +/* + * Create and transmit a management frame using "operation" and "oid", + * with arguments data/length. + * We either return an error and free the frame, or we return 0 and + * islpci_mgt_cleanup_transmit() frees the frame in the tx-done + * interrupt. + */ +static int +islpci_mgt_transmit(struct net_device *ndev, int operation, unsigned long oid, + void *data, int length) +{ + islpci_private *priv = netdev_priv(ndev); + isl38xx_control_block *cb = + (isl38xx_control_block *) priv->control_block; + void *p; + int err = -EINVAL; + unsigned long flags; + isl38xx_fragment *frag; + struct islpci_membuf buf; + u32 curr_frag; + int index; + int frag_len = length + PIMFOR_HEADER_SIZE; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_transmit\n"); +#endif + + if (frag_len > MGMT_FRAME_SIZE) { + printk(KERN_DEBUG "%s: mgmt frame too large %d\n", + ndev->name, frag_len); + goto error; + } + + err = -ENOMEM; + p = buf.mem = kmalloc(frag_len, GFP_KERNEL); + if (!buf.mem) + goto error; + + buf.size = frag_len; + + /* create the header directly in the fragment data area */ + pimfor_encode_header(operation, oid, length, (pimfor_header_t *) p); + p += PIMFOR_HEADER_SIZE; + + if (data) + memcpy(p, data, length); + else + memset(p, 0, length); + +#if VERBOSE > SHOW_ERROR_MESSAGES + { + pimfor_header_t *h = buf.mem; + DEBUG(SHOW_PIMFOR_FRAMES, + "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x\n", + h->operation, oid, h->device_id, h->flags, length); + + /* display the buffer contents for debugging */ + display_buffer((char *) h, sizeof (pimfor_header_t)); + display_buffer(p, length); + } +#endif + + err = -ENOMEM; + buf.pci_addr = pci_map_single(priv->pdev, buf.mem, frag_len, + PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(priv->pdev, buf.pci_addr)) { + printk(KERN_WARNING "%s: cannot map PCI memory for mgmt\n", + ndev->name); + goto error_free; + } + + /* Protect the control block modifications against interrupts. */ + spin_lock_irqsave(&priv->slock, flags); + curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_MGMTQ]); + if (curr_frag - priv->index_mgmt_tx >= ISL38XX_CB_MGMT_QSIZE) { + printk(KERN_WARNING "%s: mgmt tx queue is still full\n", + ndev->name); + goto error_unlock; + } + + /* commit the frame to the tx device queue */ + index = curr_frag % ISL38XX_CB_MGMT_QSIZE; + priv->mgmt_tx[index] = buf; + frag = &cb->tx_data_mgmt[index]; + frag->size = cpu_to_le16(frag_len); + frag->flags = 0; /* for any other than the last fragment, set to 1 */ + frag->address = cpu_to_le32(buf.pci_addr); + + /* The fragment address in the control block must have + * been written before announcing the frame buffer to + * device */ + wmb(); + cb->driver_curr_frag[ISL38XX_CB_TX_MGMTQ] = cpu_to_le32(curr_frag + 1); + spin_unlock_irqrestore(&priv->slock, flags); + + /* trigger the device */ + islpci_trigger(priv); + return 0; + + error_unlock: + spin_unlock_irqrestore(&priv->slock, flags); + error_free: + kfree(buf.mem); + error: + return err; +} + +/* + * Receive a management frame from the device. + * This can be an arbitrary number of traps, and at most one response + * frame for a previous request sent via islpci_mgt_transmit(). + */ +int +islpci_mgt_receive(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + isl38xx_control_block *cb = + (isl38xx_control_block *) priv->control_block; + u32 curr_frag; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive\n"); +#endif + + /* Only once per interrupt, determine fragment range to + * process. This avoids an endless loop (i.e. lockup) if + * frames come in faster than we can process them. */ + curr_frag = le32_to_cpu(cb->device_curr_frag[ISL38XX_CB_RX_MGMTQ]); + barrier(); + + for (; priv->index_mgmt_rx < curr_frag; priv->index_mgmt_rx++) { + pimfor_header_t *header; + u32 index = priv->index_mgmt_rx % ISL38XX_CB_MGMT_QSIZE; + struct islpci_membuf *buf = &priv->mgmt_rx[index]; + u16 frag_len; + int size; + struct islpci_mgmtframe *frame; + + /* I have no idea (and no documentation) if flags != 0 + * is possible. Drop the frame, reuse the buffer. */ + if (le16_to_cpu(cb->rx_data_mgmt[index].flags) != 0) { + printk(KERN_WARNING "%s: unknown flags 0x%04x\n", + ndev->name, + le16_to_cpu(cb->rx_data_mgmt[index].flags)); + continue; + } + + /* The device only returns the size of the header(s) here. */ + frag_len = le16_to_cpu(cb->rx_data_mgmt[index].size); + + /* + * We appear to have no way to tell the device the + * size of a receive buffer. Thus, if this check + * triggers, we likely have kernel heap corruption. */ + if (frag_len > MGMT_FRAME_SIZE) { + printk(KERN_WARNING + "%s: Bogus packet size of %d (%#x).\n", + ndev->name, frag_len, frag_len); + frag_len = MGMT_FRAME_SIZE; + } + + /* Ensure the results of device DMA are visible to the CPU. */ + pci_dma_sync_single_for_cpu(priv->pdev, buf->pci_addr, + buf->size, PCI_DMA_FROMDEVICE); + + /* Perform endianess conversion for PIMFOR header in-place. */ + header = pimfor_decode_header(buf->mem, frag_len); + if (!header) { + printk(KERN_WARNING "%s: no PIMFOR header found\n", + ndev->name); + continue; + } + + /* The device ID from the PIMFOR packet received from + * the MVC is always 0. We forward a sensible device_id. + * Not that anyone upstream would care... */ + header->device_id = priv->ndev->ifindex; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_PIMFOR_FRAMES, + "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x\n", + header->operation, header->oid, header->device_id, + header->flags, header->length); + + /* display the buffer contents for debugging */ + display_buffer((char *) header, PIMFOR_HEADER_SIZE); + display_buffer((char *) header + PIMFOR_HEADER_SIZE, + header->length); +#endif + + /* nobody sends these */ + if (header->flags & PIMFOR_FLAG_APPLIC_ORIGIN) { + printk(KERN_DEBUG + "%s: errant PIMFOR application frame\n", + ndev->name); + continue; + } + + /* Determine frame size, skipping OID_INL_TUNNEL headers. */ + size = PIMFOR_HEADER_SIZE + header->length; + frame = kmalloc(sizeof(struct islpci_mgmtframe) + size, + GFP_ATOMIC); + if (!frame) + continue; + + frame->ndev = ndev; + memcpy(&frame->buf, header, size); + frame->header = (pimfor_header_t *) frame->buf; + frame->data = frame->buf + PIMFOR_HEADER_SIZE; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_PIMFOR_FRAMES, + "frame: header: %p, data: %p, size: %d\n", + frame->header, frame->data, size); +#endif + + if (header->operation == PIMFOR_OP_TRAP) { +#if VERBOSE > SHOW_ERROR_MESSAGES + printk(KERN_DEBUG + "TRAP: oid 0x%x, device %i, flags 0x%x length %i\n", + header->oid, header->device_id, header->flags, + header->length); +#endif + + /* Create work to handle trap out of interrupt + * context. */ + INIT_WORK(&frame->ws, prism54_process_trap); + schedule_work(&frame->ws); + + } else { + /* Signal the one waiting process that a response + * has been received. */ + if ((frame = xchg(&priv->mgmt_received, frame)) != NULL) { + printk(KERN_WARNING + "%s: mgmt response not collected\n", + ndev->name); + kfree(frame); + } +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_TRACING, "Wake up Mgmt Queue\n"); +#endif + wake_up(&priv->mgmt_wqueue); + } + + } + + return 0; +} + +/* + * Cleanup the transmit queue by freeing all frames handled by the device. + */ +void +islpci_mgt_cleanup_transmit(struct net_device *ndev) +{ + islpci_private *priv = netdev_priv(ndev); + isl38xx_control_block *cb = /* volatile not needed */ + (isl38xx_control_block *) priv->control_block; + u32 curr_frag; + +#if VERBOSE > SHOW_ERROR_MESSAGES + DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_cleanup_transmit\n"); +#endif + + /* Only once per cleanup, determine fragment range to + * process. This avoids an endless loop (i.e. lockup) if + * the device became confused, incrementing device_curr_frag + * rapidly. */ + curr_frag = le32_to_cpu(cb->device_curr_frag[ISL38XX_CB_TX_MGMTQ]); + barrier(); + + for (; priv->index_mgmt_tx < curr_frag; priv->index_mgmt_tx++) { + int index = priv->index_mgmt_tx % ISL38XX_CB_MGMT_QSIZE; + struct islpci_membuf *buf = &priv->mgmt_tx[index]; + pci_unmap_single(priv->pdev, buf->pci_addr, buf->size, + PCI_DMA_TODEVICE); + buf->pci_addr = 0; + kfree(buf->mem); + buf->mem = NULL; + buf->size = 0; + } +} + +/* + * Perform one request-response transaction to the device. + */ +int +islpci_mgt_transaction(struct net_device *ndev, + int operation, unsigned long oid, + void *senddata, int sendlen, + struct islpci_mgmtframe **recvframe) +{ + islpci_private *priv = netdev_priv(ndev); + const long wait_cycle_jiffies = msecs_to_jiffies(ISL38XX_WAIT_CYCLE * 10); + long timeout_left = ISL38XX_MAX_WAIT_CYCLES * wait_cycle_jiffies; + int err; + DEFINE_WAIT(wait); + + *recvframe = NULL; + + if (mutex_lock_interruptible(&priv->mgmt_lock)) + return -ERESTARTSYS; + + prepare_to_wait(&priv->mgmt_wqueue, &wait, TASK_UNINTERRUPTIBLE); + err = islpci_mgt_transmit(ndev, operation, oid, senddata, sendlen); + if (err) + goto out; + + err = -ETIMEDOUT; + while (timeout_left > 0) { + int timeleft; + struct islpci_mgmtframe *frame; + + timeleft = schedule_timeout_uninterruptible(wait_cycle_jiffies); + frame = xchg(&priv->mgmt_received, NULL); + if (frame) { + if (frame->header->oid == oid) { + *recvframe = frame; + err = 0; + goto out; + } else { + printk(KERN_DEBUG + "%s: expecting oid 0x%x, received 0x%x.\n", + ndev->name, (unsigned int) oid, + frame->header->oid); + kfree(frame); + frame = NULL; + } + } + if (timeleft == 0) { + printk(KERN_DEBUG + "%s: timeout waiting for mgmt response %lu, " + "triggering device\n", + ndev->name, timeout_left); + islpci_trigger(priv); + } + timeout_left += timeleft - wait_cycle_jiffies; + } + printk(KERN_WARNING "%s: timeout waiting for mgmt response\n", + ndev->name); + + /* TODO: we should reset the device here */ + out: + finish_wait(&priv->mgmt_wqueue, &wait); + mutex_unlock(&priv->mgmt_lock); + return err; +} + diff --git a/drivers/net/wireless/intersil/prism54/islpci_mgt.h b/drivers/net/wireless/intersil/prism54/islpci_mgt.h new file mode 100644 index 000000000..700c434c8 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/islpci_mgt.h @@ -0,0 +1,138 @@ +/* + * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef _ISLPCI_MGT_H +#define _ISLPCI_MGT_H + +#include <linux/wireless.h> +#include <linux/skbuff.h> +#include <linux/slab.h> + +/* + * Function definitions + */ + +#define K_DEBUG(f, m, args...) do { if(f & m) printk(KERN_DEBUG args); } while(0) +#define DEBUG(f, args...) K_DEBUG(f, pc_debug, args) + +extern int pc_debug; +#define init_wds 0 /* help compiler optimize away dead code */ + + +/* General driver definitions */ +#define PCIDEVICE_LATENCY_TIMER_MIN 0x40 +#define PCIDEVICE_LATENCY_TIMER_VAL 0x50 + +/* Debugging verbose definitions */ +#define SHOW_NOTHING 0x00 /* overrules everything */ +#define SHOW_ANYTHING 0xFF +#define SHOW_ERROR_MESSAGES 0x01 +#define SHOW_TRAPS 0x02 +#define SHOW_FUNCTION_CALLS 0x04 +#define SHOW_TRACING 0x08 +#define SHOW_QUEUE_INDEXES 0x10 +#define SHOW_PIMFOR_FRAMES 0x20 +#define SHOW_BUFFER_CONTENTS 0x40 +#define VERBOSE 0x01 + +/* Default card definitions */ +#define CARD_DEFAULT_CHANNEL 6 +#define CARD_DEFAULT_MODE INL_MODE_CLIENT +#define CARD_DEFAULT_IW_MODE IW_MODE_INFRA +#define CARD_DEFAULT_BSSTYPE DOT11_BSSTYPE_INFRA +#define CARD_DEFAULT_CLIENT_SSID "" +#define CARD_DEFAULT_AP_SSID "default" +#define CARD_DEFAULT_KEY1 "default_key_1" +#define CARD_DEFAULT_KEY2 "default_key_2" +#define CARD_DEFAULT_KEY3 "default_key_3" +#define CARD_DEFAULT_KEY4 "default_key_4" +#define CARD_DEFAULT_WEP 0 +#define CARD_DEFAULT_FILTER 0 +#define CARD_DEFAULT_WDS 0 +#define CARD_DEFAULT_AUTHEN DOT11_AUTH_OS +#define CARD_DEFAULT_DOT1X 0 +#define CARD_DEFAULT_MLME_MODE DOT11_MLME_AUTO +#define CARD_DEFAULT_CONFORMANCE OID_INL_CONFORMANCE_NONE +#define CARD_DEFAULT_PROFILE DOT11_PROFILE_MIXED_G_WIFI +#define CARD_DEFAULT_MAXFRAMEBURST DOT11_MAXFRAMEBURST_MIXED_SAFE + +/* PIMFOR package definitions */ +#define PIMFOR_ETHERTYPE 0x8828 +#define PIMFOR_HEADER_SIZE 12 +#define PIMFOR_VERSION 1 +#define PIMFOR_OP_GET 0 +#define PIMFOR_OP_SET 1 +#define PIMFOR_OP_RESPONSE 2 +#define PIMFOR_OP_ERROR 3 +#define PIMFOR_OP_TRAP 4 +#define PIMFOR_OP_RESERVED 5 /* till 255 */ +#define PIMFOR_DEV_ID_MHLI_MIB 0 +#define PIMFOR_FLAG_APPLIC_ORIGIN 0x01 +#define PIMFOR_FLAG_LITTLE_ENDIAN 0x02 + +void display_buffer(char *, int); + +/* + * Type definition section + * + * the structure defines only the header allowing copyless + * frame handling + */ +typedef struct { + u8 version; + u8 operation; + u32 oid; + u8 device_id; + u8 flags; + u32 length; +} __packed +pimfor_header_t; + +/* A received and interrupt-processed management frame, either for + * schedule_work(prism54_process_trap) or for priv->mgmt_received, + * processed by islpci_mgt_transaction(). */ +struct islpci_mgmtframe { + struct net_device *ndev; /* pointer to network device */ + pimfor_header_t *header; /* payload header, points into buf */ + void *data; /* payload ex header, points into buf */ + struct work_struct ws; /* argument for schedule_work() */ + char buf[0]; /* fragment buffer */ +}; + +int +islpci_mgt_receive(struct net_device *ndev); + +int +islpci_mgmt_rx_fill(struct net_device *ndev); + +void +islpci_mgt_cleanup_transmit(struct net_device *ndev); + +int +islpci_mgt_transaction(struct net_device *ndev, + int operation, unsigned long oid, + void *senddata, int sendlen, + struct islpci_mgmtframe **recvframe); + +static inline void +islpci_mgt_release(struct islpci_mgmtframe *frame) +{ + kfree(frame); +} + +#endif /* _ISLPCI_MGT_H */ diff --git a/drivers/net/wireless/intersil/prism54/oid_mgt.c b/drivers/net/wireless/intersil/prism54/oid_mgt.c new file mode 100644 index 000000000..6528ed5b9 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/oid_mgt.c @@ -0,0 +1,901 @@ +/* + * Copyright (C) 2003,2004 Aurelien Alleaume <slts@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> + +#include "prismcompat.h" +#include "islpci_dev.h" +#include "islpci_mgt.h" +#include "isl_oid.h" +#include "oid_mgt.h" +#include "isl_ioctl.h" + +/* to convert between channel and freq */ +static const int frequency_list_bg[] = { 2412, 2417, 2422, 2427, 2432, + 2437, 2442, 2447, 2452, 2457, 2462, 2467, 2472, 2484 +}; + +int +channel_of_freq(int f) +{ + int c = 0; + + if ((f >= 2412) && (f <= 2484)) { + while ((c < 14) && (f != frequency_list_bg[c])) + c++; + return (c >= 14) ? 0 : ++c; + } else if ((f >= (int) 5000) && (f <= (int) 6000)) { + return ( (f - 5000) / 5 ); + } else + return 0; +} + +#define OID_STRUCT(name,oid,s,t) [name] = {oid, 0, sizeof(s), t} +#define OID_STRUCT_C(name,oid,s,t) OID_STRUCT(name,oid,s,t | OID_FLAG_CACHED) +#define OID_U32(name,oid) OID_STRUCT(name,oid,u32,OID_TYPE_U32) +#define OID_U32_C(name,oid) OID_STRUCT_C(name,oid,u32,OID_TYPE_U32) +#define OID_STRUCT_MLME(name,oid) OID_STRUCT(name,oid,struct obj_mlme,OID_TYPE_MLME) +#define OID_STRUCT_MLMEEX(name,oid) OID_STRUCT(name,oid,struct obj_mlmeex,OID_TYPE_MLMEEX) + +#define OID_UNKNOWN(name,oid) OID_STRUCT(name,oid,0,0) + +struct oid_t isl_oid[] = { + OID_STRUCT(GEN_OID_MACADDRESS, 0x00000000, u8[6], OID_TYPE_ADDR), + OID_U32(GEN_OID_LINKSTATE, 0x00000001), + OID_UNKNOWN(GEN_OID_WATCHDOG, 0x00000002), + OID_UNKNOWN(GEN_OID_MIBOP, 0x00000003), + OID_UNKNOWN(GEN_OID_OPTIONS, 0x00000004), + OID_UNKNOWN(GEN_OID_LEDCONFIG, 0x00000005), + + /* 802.11 */ + OID_U32_C(DOT11_OID_BSSTYPE, 0x10000000), + OID_STRUCT_C(DOT11_OID_BSSID, 0x10000001, u8[6], OID_TYPE_RAW), + OID_STRUCT_C(DOT11_OID_SSID, 0x10000002, struct obj_ssid, + OID_TYPE_SSID), + OID_U32(DOT11_OID_STATE, 0x10000003), + OID_U32(DOT11_OID_AID, 0x10000004), + OID_STRUCT(DOT11_OID_COUNTRYSTRING, 0x10000005, u8[4], OID_TYPE_RAW), + OID_STRUCT_C(DOT11_OID_SSIDOVERRIDE, 0x10000006, struct obj_ssid, + OID_TYPE_SSID), + + OID_U32(DOT11_OID_MEDIUMLIMIT, 0x11000000), + OID_U32_C(DOT11_OID_BEACONPERIOD, 0x11000001), + OID_U32(DOT11_OID_DTIMPERIOD, 0x11000002), + OID_U32(DOT11_OID_ATIMWINDOW, 0x11000003), + OID_U32(DOT11_OID_LISTENINTERVAL, 0x11000004), + OID_U32(DOT11_OID_CFPPERIOD, 0x11000005), + OID_U32(DOT11_OID_CFPDURATION, 0x11000006), + + OID_U32_C(DOT11_OID_AUTHENABLE, 0x12000000), + OID_U32_C(DOT11_OID_PRIVACYINVOKED, 0x12000001), + OID_U32_C(DOT11_OID_EXUNENCRYPTED, 0x12000002), + OID_U32_C(DOT11_OID_DEFKEYID, 0x12000003), + [DOT11_OID_DEFKEYX] = {0x12000004, 3, sizeof (struct obj_key), + OID_FLAG_CACHED | OID_TYPE_KEY}, /* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */ + OID_UNKNOWN(DOT11_OID_STAKEY, 0x12000008), + OID_U32(DOT11_OID_REKEYTHRESHOLD, 0x12000009), + OID_UNKNOWN(DOT11_OID_STASC, 0x1200000a), + + OID_U32(DOT11_OID_PRIVTXREJECTED, 0x1a000000), + OID_U32(DOT11_OID_PRIVRXPLAIN, 0x1a000001), + OID_U32(DOT11_OID_PRIVRXFAILED, 0x1a000002), + OID_U32(DOT11_OID_PRIVRXNOKEY, 0x1a000003), + + OID_U32_C(DOT11_OID_RTSTHRESH, 0x13000000), + OID_U32_C(DOT11_OID_FRAGTHRESH, 0x13000001), + OID_U32_C(DOT11_OID_SHORTRETRIES, 0x13000002), + OID_U32_C(DOT11_OID_LONGRETRIES, 0x13000003), + OID_U32_C(DOT11_OID_MAXTXLIFETIME, 0x13000004), + OID_U32(DOT11_OID_MAXRXLIFETIME, 0x13000005), + OID_U32(DOT11_OID_AUTHRESPTIMEOUT, 0x13000006), + OID_U32(DOT11_OID_ASSOCRESPTIMEOUT, 0x13000007), + + OID_UNKNOWN(DOT11_OID_ALOFT_TABLE, 0x1d000000), + OID_UNKNOWN(DOT11_OID_ALOFT_CTRL_TABLE, 0x1d000001), + OID_UNKNOWN(DOT11_OID_ALOFT_RETREAT, 0x1d000002), + OID_UNKNOWN(DOT11_OID_ALOFT_PROGRESS, 0x1d000003), + OID_U32(DOT11_OID_ALOFT_FIXEDRATE, 0x1d000004), + OID_UNKNOWN(DOT11_OID_ALOFT_RSSIGRAPH, 0x1d000005), + OID_UNKNOWN(DOT11_OID_ALOFT_CONFIG, 0x1d000006), + + [DOT11_OID_VDCFX] = {0x1b000000, 7, 0, 0}, + OID_U32(DOT11_OID_MAXFRAMEBURST, 0x1b000008), + + OID_U32(DOT11_OID_PSM, 0x14000000), + OID_U32(DOT11_OID_CAMTIMEOUT, 0x14000001), + OID_U32(DOT11_OID_RECEIVEDTIMS, 0x14000002), + OID_U32(DOT11_OID_ROAMPREFERENCE, 0x14000003), + + OID_U32(DOT11_OID_BRIDGELOCAL, 0x15000000), + OID_U32(DOT11_OID_CLIENTS, 0x15000001), + OID_U32(DOT11_OID_CLIENTSASSOCIATED, 0x15000002), + [DOT11_OID_CLIENTX] = {0x15000003, 2006, 0, 0}, /* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */ + + OID_STRUCT(DOT11_OID_CLIENTFIND, 0x150007DB, u8[6], OID_TYPE_ADDR), + OID_STRUCT(DOT11_OID_WDSLINKADD, 0x150007DC, u8[6], OID_TYPE_ADDR), + OID_STRUCT(DOT11_OID_WDSLINKREMOVE, 0x150007DD, u8[6], OID_TYPE_ADDR), + OID_STRUCT(DOT11_OID_EAPAUTHSTA, 0x150007DE, u8[6], OID_TYPE_ADDR), + OID_STRUCT(DOT11_OID_EAPUNAUTHSTA, 0x150007DF, u8[6], OID_TYPE_ADDR), + OID_U32_C(DOT11_OID_DOT1XENABLE, 0x150007E0), + OID_UNKNOWN(DOT11_OID_MICFAILURE, 0x150007E1), + OID_UNKNOWN(DOT11_OID_REKEYINDICATE, 0x150007E2), + + OID_U32(DOT11_OID_MPDUTXSUCCESSFUL, 0x16000000), + OID_U32(DOT11_OID_MPDUTXONERETRY, 0x16000001), + OID_U32(DOT11_OID_MPDUTXMULTIPLERETRIES, 0x16000002), + OID_U32(DOT11_OID_MPDUTXFAILED, 0x16000003), + OID_U32(DOT11_OID_MPDURXSUCCESSFUL, 0x16000004), + OID_U32(DOT11_OID_MPDURXDUPS, 0x16000005), + OID_U32(DOT11_OID_RTSSUCCESSFUL, 0x16000006), + OID_U32(DOT11_OID_RTSFAILED, 0x16000007), + OID_U32(DOT11_OID_ACKFAILED, 0x16000008), + OID_U32(DOT11_OID_FRAMERECEIVES, 0x16000009), + OID_U32(DOT11_OID_FRAMEERRORS, 0x1600000A), + OID_U32(DOT11_OID_FRAMEABORTS, 0x1600000B), + OID_U32(DOT11_OID_FRAMEABORTSPHY, 0x1600000C), + + OID_U32(DOT11_OID_SLOTTIME, 0x17000000), + OID_U32(DOT11_OID_CWMIN, 0x17000001), + OID_U32(DOT11_OID_CWMAX, 0x17000002), + OID_U32(DOT11_OID_ACKWINDOW, 0x17000003), + OID_U32(DOT11_OID_ANTENNARX, 0x17000004), + OID_U32(DOT11_OID_ANTENNATX, 0x17000005), + OID_U32(DOT11_OID_ANTENNADIVERSITY, 0x17000006), + OID_U32_C(DOT11_OID_CHANNEL, 0x17000007), + OID_U32_C(DOT11_OID_EDTHRESHOLD, 0x17000008), + OID_U32(DOT11_OID_PREAMBLESETTINGS, 0x17000009), + OID_STRUCT(DOT11_OID_RATES, 0x1700000A, u8[IWMAX_BITRATES + 1], + OID_TYPE_RAW), + OID_U32(DOT11_OID_CCAMODESUPPORTED, 0x1700000B), + OID_U32(DOT11_OID_CCAMODE, 0x1700000C), + OID_UNKNOWN(DOT11_OID_RSSIVECTOR, 0x1700000D), + OID_UNKNOWN(DOT11_OID_OUTPUTPOWERTABLE, 0x1700000E), + OID_U32(DOT11_OID_OUTPUTPOWER, 0x1700000F), + OID_STRUCT(DOT11_OID_SUPPORTEDRATES, 0x17000010, + u8[IWMAX_BITRATES + 1], OID_TYPE_RAW), + OID_U32_C(DOT11_OID_FREQUENCY, 0x17000011), + [DOT11_OID_SUPPORTEDFREQUENCIES] = + {0x17000012, 0, sizeof (struct obj_frequencies) + + sizeof (u16) * IWMAX_FREQ, OID_TYPE_FREQUENCIES}, + + OID_U32(DOT11_OID_NOISEFLOOR, 0x17000013), + OID_STRUCT(DOT11_OID_FREQUENCYACTIVITY, 0x17000014, u8[IWMAX_FREQ + 1], + OID_TYPE_RAW), + OID_UNKNOWN(DOT11_OID_IQCALIBRATIONTABLE, 0x17000015), + OID_U32(DOT11_OID_NONERPPROTECTION, 0x17000016), + OID_U32(DOT11_OID_SLOTSETTINGS, 0x17000017), + OID_U32(DOT11_OID_NONERPTIMEOUT, 0x17000018), + OID_U32(DOT11_OID_PROFILES, 0x17000019), + OID_STRUCT(DOT11_OID_EXTENDEDRATES, 0x17000020, + u8[IWMAX_BITRATES + 1], OID_TYPE_RAW), + + OID_STRUCT_MLME(DOT11_OID_DEAUTHENTICATE, 0x18000000), + OID_STRUCT_MLME(DOT11_OID_AUTHENTICATE, 0x18000001), + OID_STRUCT_MLME(DOT11_OID_DISASSOCIATE, 0x18000002), + OID_STRUCT_MLME(DOT11_OID_ASSOCIATE, 0x18000003), + OID_UNKNOWN(DOT11_OID_SCAN, 0x18000004), + OID_STRUCT_MLMEEX(DOT11_OID_BEACON, 0x18000005), + OID_STRUCT_MLMEEX(DOT11_OID_PROBE, 0x18000006), + OID_STRUCT_MLMEEX(DOT11_OID_DEAUTHENTICATEEX, 0x18000007), + OID_STRUCT_MLMEEX(DOT11_OID_AUTHENTICATEEX, 0x18000008), + OID_STRUCT_MLMEEX(DOT11_OID_DISASSOCIATEEX, 0x18000009), + OID_STRUCT_MLMEEX(DOT11_OID_ASSOCIATEEX, 0x1800000A), + OID_STRUCT_MLMEEX(DOT11_OID_REASSOCIATE, 0x1800000B), + OID_STRUCT_MLMEEX(DOT11_OID_REASSOCIATEEX, 0x1800000C), + + OID_U32(DOT11_OID_NONERPSTATUS, 0x1E000000), + + OID_U32(DOT11_OID_STATIMEOUT, 0x19000000), + OID_U32_C(DOT11_OID_MLMEAUTOLEVEL, 0x19000001), + OID_U32(DOT11_OID_BSSTIMEOUT, 0x19000002), + [DOT11_OID_ATTACHMENT] = {0x19000003, 0, + sizeof(struct obj_attachment), OID_TYPE_ATTACH}, + OID_STRUCT_C(DOT11_OID_PSMBUFFER, 0x19000004, struct obj_buffer, + OID_TYPE_BUFFER), + + OID_U32(DOT11_OID_BSSS, 0x1C000000), + [DOT11_OID_BSSX] = {0x1C000001, 63, sizeof (struct obj_bss), + OID_TYPE_BSS}, /*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */ + OID_STRUCT(DOT11_OID_BSSFIND, 0x1C000042, struct obj_bss, OID_TYPE_BSS), + [DOT11_OID_BSSLIST] = {0x1C000043, 0, sizeof (struct + obj_bsslist) + + sizeof (struct obj_bss[IWMAX_BSS]), + OID_TYPE_BSSLIST}, + + OID_UNKNOWN(OID_INL_TUNNEL, 0xFF020000), + OID_UNKNOWN(OID_INL_MEMADDR, 0xFF020001), + OID_UNKNOWN(OID_INL_MEMORY, 0xFF020002), + OID_U32_C(OID_INL_MODE, 0xFF020003), + OID_UNKNOWN(OID_INL_COMPONENT_NR, 0xFF020004), + OID_STRUCT(OID_INL_VERSION, 0xFF020005, u8[8], OID_TYPE_RAW), + OID_UNKNOWN(OID_INL_INTERFACE_ID, 0xFF020006), + OID_UNKNOWN(OID_INL_COMPONENT_ID, 0xFF020007), + OID_U32_C(OID_INL_CONFIG, 0xFF020008), + OID_U32_C(OID_INL_DOT11D_CONFORMANCE, 0xFF02000C), + OID_U32(OID_INL_PHYCAPABILITIES, 0xFF02000D), + OID_U32_C(OID_INL_OUTPUTPOWER, 0xFF02000F), + +}; + +int +mgt_init(islpci_private *priv) +{ + int i; + + priv->mib = kcalloc(OID_NUM_LAST, sizeof (void *), GFP_KERNEL); + if (!priv->mib) + return -ENOMEM; + + /* Alloc the cache */ + for (i = 0; i < OID_NUM_LAST; i++) { + if (isl_oid[i].flags & OID_FLAG_CACHED) { + priv->mib[i] = kzalloc(isl_oid[i].size * + (isl_oid[i].range + 1), + GFP_KERNEL); + if (!priv->mib[i]) + return -ENOMEM; + } else + priv->mib[i] = NULL; + } + + init_rwsem(&priv->mib_sem); + prism54_mib_init(priv); + + return 0; +} + +void +mgt_clean(islpci_private *priv) +{ + int i; + + if (!priv->mib) + return; + for (i = 0; i < OID_NUM_LAST; i++) { + kfree(priv->mib[i]); + priv->mib[i] = NULL; + } + kfree(priv->mib); + priv->mib = NULL; +} + +void +mgt_le_to_cpu(int type, void *data) +{ + switch (type) { + case OID_TYPE_U32: + *(u32 *) data = le32_to_cpu(*(u32 *) data); + break; + case OID_TYPE_BUFFER:{ + struct obj_buffer *buff = data; + buff->size = le32_to_cpu(buff->size); + buff->addr = le32_to_cpu(buff->addr); + break; + } + case OID_TYPE_BSS:{ + struct obj_bss *bss = data; + bss->age = le16_to_cpu(bss->age); + bss->channel = le16_to_cpu(bss->channel); + bss->capinfo = le16_to_cpu(bss->capinfo); + bss->rates = le16_to_cpu(bss->rates); + bss->basic_rates = le16_to_cpu(bss->basic_rates); + break; + } + case OID_TYPE_BSSLIST:{ + struct obj_bsslist *list = data; + int i; + list->nr = le32_to_cpu(list->nr); + for (i = 0; i < list->nr; i++) + mgt_le_to_cpu(OID_TYPE_BSS, &list->bsslist[i]); + break; + } + case OID_TYPE_FREQUENCIES:{ + struct obj_frequencies *freq = data; + int i; + freq->nr = le16_to_cpu(freq->nr); + for (i = 0; i < freq->nr; i++) + freq->mhz[i] = le16_to_cpu(freq->mhz[i]); + break; + } + case OID_TYPE_MLME:{ + struct obj_mlme *mlme = data; + mlme->id = le16_to_cpu(mlme->id); + mlme->state = le16_to_cpu(mlme->state); + mlme->code = le16_to_cpu(mlme->code); + break; + } + case OID_TYPE_MLMEEX:{ + struct obj_mlmeex *mlme = data; + mlme->id = le16_to_cpu(mlme->id); + mlme->state = le16_to_cpu(mlme->state); + mlme->code = le16_to_cpu(mlme->code); + mlme->size = le16_to_cpu(mlme->size); + break; + } + case OID_TYPE_ATTACH:{ + struct obj_attachment *attach = data; + attach->id = le16_to_cpu(attach->id); + attach->size = le16_to_cpu(attach->size); + break; + } + case OID_TYPE_SSID: + case OID_TYPE_KEY: + case OID_TYPE_ADDR: + case OID_TYPE_RAW: + break; + default: + BUG(); + } +} + +static void +mgt_cpu_to_le(int type, void *data) +{ + switch (type) { + case OID_TYPE_U32: + *(u32 *) data = cpu_to_le32(*(u32 *) data); + break; + case OID_TYPE_BUFFER:{ + struct obj_buffer *buff = data; + buff->size = cpu_to_le32(buff->size); + buff->addr = cpu_to_le32(buff->addr); + break; + } + case OID_TYPE_BSS:{ + struct obj_bss *bss = data; + bss->age = cpu_to_le16(bss->age); + bss->channel = cpu_to_le16(bss->channel); + bss->capinfo = cpu_to_le16(bss->capinfo); + bss->rates = cpu_to_le16(bss->rates); + bss->basic_rates = cpu_to_le16(bss->basic_rates); + break; + } + case OID_TYPE_BSSLIST:{ + struct obj_bsslist *list = data; + int i; + list->nr = cpu_to_le32(list->nr); + for (i = 0; i < list->nr; i++) + mgt_cpu_to_le(OID_TYPE_BSS, &list->bsslist[i]); + break; + } + case OID_TYPE_FREQUENCIES:{ + struct obj_frequencies *freq = data; + int i; + freq->nr = cpu_to_le16(freq->nr); + for (i = 0; i < freq->nr; i++) + freq->mhz[i] = cpu_to_le16(freq->mhz[i]); + break; + } + case OID_TYPE_MLME:{ + struct obj_mlme *mlme = data; + mlme->id = cpu_to_le16(mlme->id); + mlme->state = cpu_to_le16(mlme->state); + mlme->code = cpu_to_le16(mlme->code); + break; + } + case OID_TYPE_MLMEEX:{ + struct obj_mlmeex *mlme = data; + mlme->id = cpu_to_le16(mlme->id); + mlme->state = cpu_to_le16(mlme->state); + mlme->code = cpu_to_le16(mlme->code); + mlme->size = cpu_to_le16(mlme->size); + break; + } + case OID_TYPE_ATTACH:{ + struct obj_attachment *attach = data; + attach->id = cpu_to_le16(attach->id); + attach->size = cpu_to_le16(attach->size); + break; + } + case OID_TYPE_SSID: + case OID_TYPE_KEY: + case OID_TYPE_ADDR: + case OID_TYPE_RAW: + break; + default: + BUG(); + } +} + +/* Note : data is modified during this function */ + +int +mgt_set_request(islpci_private *priv, enum oid_num_t n, int extra, void *data) +{ + int ret = 0; + struct islpci_mgmtframe *response = NULL; + int response_op = PIMFOR_OP_ERROR; + int dlen; + void *cache, *_data = data; + u32 oid; + + BUG_ON(n >= OID_NUM_LAST); + BUG_ON(extra > isl_oid[n].range); + + if (!priv->mib) + /* memory has been freed */ + return -1; + + dlen = isl_oid[n].size; + cache = priv->mib[n]; + cache += (cache ? extra * dlen : 0); + oid = isl_oid[n].oid + extra; + + if (_data == NULL) + /* we are requested to re-set a cached value */ + _data = cache; + else + mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, _data); + /* If we are going to write to the cache, we don't want anyone to read + * it -> acquire write lock. + * Else we could acquire a read lock to be sure we don't bother the + * commit process (which takes a write lock). But I'm not sure if it's + * needed. + */ + if (cache) + down_write(&priv->mib_sem); + + if (islpci_get_state(priv) >= PRV_STATE_READY) { + ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, oid, + _data, dlen, &response); + if (!ret) { + response_op = response->header->operation; + islpci_mgt_release(response); + } + if (ret || response_op == PIMFOR_OP_ERROR) + ret = -EIO; + } else if (!cache) + ret = -EIO; + + if (cache) { + if (!ret && data) + memcpy(cache, _data, dlen); + up_write(&priv->mib_sem); + } + + /* re-set given data to what it was */ + if (data) + mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, data); + + return ret; +} + +/* None of these are cached */ +int +mgt_set_varlen(islpci_private *priv, enum oid_num_t n, void *data, int extra_len) +{ + int ret = 0; + struct islpci_mgmtframe *response; + int response_op = PIMFOR_OP_ERROR; + int dlen; + u32 oid; + + BUG_ON(n >= OID_NUM_LAST); + + dlen = isl_oid[n].size; + oid = isl_oid[n].oid; + + mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, data); + + if (islpci_get_state(priv) >= PRV_STATE_READY) { + ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, oid, + data, dlen + extra_len, &response); + if (!ret) { + response_op = response->header->operation; + islpci_mgt_release(response); + } + if (ret || response_op == PIMFOR_OP_ERROR) + ret = -EIO; + } else + ret = -EIO; + + /* re-set given data to what it was */ + if (data) + mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, data); + + return ret; +} + +int +mgt_get_request(islpci_private *priv, enum oid_num_t n, int extra, void *data, + union oid_res_t *res) +{ + + int ret = -EIO; + int reslen = 0; + struct islpci_mgmtframe *response = NULL; + + int dlen; + void *cache, *_res = NULL; + u32 oid; + + BUG_ON(n >= OID_NUM_LAST); + BUG_ON(extra > isl_oid[n].range); + + res->ptr = NULL; + + if (!priv->mib) + /* memory has been freed */ + return -1; + + dlen = isl_oid[n].size; + cache = priv->mib[n]; + cache += cache ? extra * dlen : 0; + oid = isl_oid[n].oid + extra; + reslen = dlen; + + if (cache) + down_read(&priv->mib_sem); + + if (islpci_get_state(priv) >= PRV_STATE_READY) { + ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET, + oid, data, dlen, &response); + if (ret || !response || + response->header->operation == PIMFOR_OP_ERROR) { + if (response) + islpci_mgt_release(response); + ret = -EIO; + } + if (!ret) { + _res = response->data; + reslen = response->header->length; + } + } else if (cache) { + _res = cache; + ret = 0; + } + if ((isl_oid[n].flags & OID_FLAG_TYPE) == OID_TYPE_U32) + res->u = ret ? 0 : le32_to_cpu(*(u32 *) _res); + else { + res->ptr = kmalloc(reslen, GFP_KERNEL); + BUG_ON(res->ptr == NULL); + if (ret) + memset(res->ptr, 0, reslen); + else { + memcpy(res->ptr, _res, reslen); + mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, + res->ptr); + } + } + if (cache) + up_read(&priv->mib_sem); + + if (response && !ret) + islpci_mgt_release(response); + + if (reslen > isl_oid[n].size) + printk(KERN_DEBUG + "mgt_get_request(0x%x): received data length was bigger " + "than expected (%d > %d). Memory is probably corrupted...", + oid, reslen, isl_oid[n].size); + + return ret; +} + +/* lock outside */ +int +mgt_commit_list(islpci_private *priv, enum oid_num_t *l, int n) +{ + int i, ret = 0; + struct islpci_mgmtframe *response; + + for (i = 0; i < n; i++) { + struct oid_t *t = &(isl_oid[l[i]]); + void *data = priv->mib[l[i]]; + int j = 0; + u32 oid = t->oid; + BUG_ON(data == NULL); + while (j <= t->range) { + int r = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, + oid, data, t->size, + &response); + if (response) { + r |= (response->header->operation == PIMFOR_OP_ERROR); + islpci_mgt_release(response); + } + if (r) + printk(KERN_ERR "%s: mgt_commit_list: failure. " + "oid=%08x err=%d\n", + priv->ndev->name, oid, r); + ret |= r; + j++; + oid++; + data += t->size; + } + } + return ret; +} + +/* Lock outside */ + +void +mgt_set(islpci_private *priv, enum oid_num_t n, void *data) +{ + BUG_ON(n >= OID_NUM_LAST); + BUG_ON(priv->mib[n] == NULL); + + memcpy(priv->mib[n], data, isl_oid[n].size); + mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, priv->mib[n]); +} + +void +mgt_get(islpci_private *priv, enum oid_num_t n, void *res) +{ + BUG_ON(n >= OID_NUM_LAST); + BUG_ON(priv->mib[n] == NULL); + BUG_ON(res == NULL); + + memcpy(res, priv->mib[n], isl_oid[n].size); + mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, res); +} + +/* Commits the cache. Lock outside. */ + +static enum oid_num_t commit_part1[] = { + OID_INL_CONFIG, + OID_INL_MODE, + DOT11_OID_BSSTYPE, + DOT11_OID_CHANNEL, + DOT11_OID_MLMEAUTOLEVEL +}; + +static enum oid_num_t commit_part2[] = { + DOT11_OID_SSID, + DOT11_OID_PSMBUFFER, + DOT11_OID_AUTHENABLE, + DOT11_OID_PRIVACYINVOKED, + DOT11_OID_EXUNENCRYPTED, + DOT11_OID_DEFKEYX, /* MULTIPLE */ + DOT11_OID_DEFKEYID, + DOT11_OID_DOT1XENABLE, + OID_INL_DOT11D_CONFORMANCE, + /* Do not initialize this - fw < 1.0.4.3 rejects it + OID_INL_OUTPUTPOWER, + */ +}; + +/* update the MAC addr. */ +static int +mgt_update_addr(islpci_private *priv) +{ + struct islpci_mgmtframe *res; + int ret; + + ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET, + isl_oid[GEN_OID_MACADDRESS].oid, NULL, + isl_oid[GEN_OID_MACADDRESS].size, &res); + + if ((ret == 0) && res && (res->header->operation != PIMFOR_OP_ERROR)) + memcpy(priv->ndev->dev_addr, res->data, ETH_ALEN); + else + ret = -EIO; + if (res) + islpci_mgt_release(res); + + if (ret) + printk(KERN_ERR "%s: mgt_update_addr: failure\n", priv->ndev->name); + return ret; +} + +int +mgt_commit(islpci_private *priv) +{ + int rvalue; + enum oid_num_t u; + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return 0; + + rvalue = mgt_commit_list(priv, commit_part1, ARRAY_SIZE(commit_part1)); + + if (priv->iw_mode != IW_MODE_MONITOR) + rvalue |= mgt_commit_list(priv, commit_part2, ARRAY_SIZE(commit_part2)); + + u = OID_INL_MODE; + rvalue |= mgt_commit_list(priv, &u, 1); + rvalue |= mgt_update_addr(priv); + + if (rvalue) { + /* some request have failed. The device might be in an + incoherent state. We should reset it ! */ + printk(KERN_DEBUG "%s: mgt_commit: failure\n", priv->ndev->name); + } + return rvalue; +} + +/* The following OIDs need to be "unlatched": + * + * MEDIUMLIMIT,BEACONPERIOD,DTIMPERIOD,ATIMWINDOW,LISTENINTERVAL + * FREQUENCY,EXTENDEDRATES. + * + * The way to do this is to set ESSID. Note though that they may get + * unlatch before though by setting another OID. */ +#if 0 +void +mgt_unlatch_all(islpci_private *priv) +{ + u32 u; + int rvalue = 0; + + if (islpci_get_state(priv) < PRV_STATE_INIT) + return; + + u = DOT11_OID_SSID; + rvalue = mgt_commit_list(priv, &u, 1); + /* Necessary if in MANUAL RUN mode? */ +#if 0 + u = OID_INL_MODE; + rvalue |= mgt_commit_list(priv, &u, 1); + + u = DOT11_OID_MLMEAUTOLEVEL; + rvalue |= mgt_commit_list(priv, &u, 1); + + u = OID_INL_MODE; + rvalue |= mgt_commit_list(priv, &u, 1); +#endif + + if (rvalue) + printk(KERN_DEBUG "%s: Unlatching OIDs failed\n", priv->ndev->name); +} +#endif + +/* This will tell you if you are allowed to answer a mlme(ex) request .*/ + +int +mgt_mlme_answer(islpci_private *priv) +{ + u32 mlmeautolevel; + /* Acquire a read lock because if we are in a mode change, it's + * possible to answer true, while the card is leaving master to managed + * mode. Answering to a mlme in this situation could hang the card. + */ + down_read(&priv->mib_sem); + mlmeautolevel = + le32_to_cpu(*(u32 *) priv->mib[DOT11_OID_MLMEAUTOLEVEL]); + up_read(&priv->mib_sem); + + return ((priv->iw_mode == IW_MODE_MASTER) && + (mlmeautolevel >= DOT11_MLME_INTERMEDIATE)); +} + +enum oid_num_t +mgt_oidtonum(u32 oid) +{ + int i; + + for (i = 0; i < OID_NUM_LAST; i++) + if (isl_oid[i].oid == oid) + return i; + + printk(KERN_DEBUG "looking for an unknown oid 0x%x", oid); + + return OID_NUM_LAST; +} + +int +mgt_response_to_str(enum oid_num_t n, union oid_res_t *r, char *str) +{ + switch (isl_oid[n].flags & OID_FLAG_TYPE) { + case OID_TYPE_U32: + return snprintf(str, PRIV_STR_SIZE, "%u\n", r->u); + case OID_TYPE_BUFFER:{ + struct obj_buffer *buff = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "size=%u\naddr=0x%X\n", buff->size, + buff->addr); + } + break; + case OID_TYPE_BSS:{ + struct obj_bss *bss = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "age=%u\nchannel=%u\n" + "capinfo=0x%X\nrates=0x%X\n" + "basic_rates=0x%X\n", bss->age, + bss->channel, bss->capinfo, + bss->rates, bss->basic_rates); + } + break; + case OID_TYPE_BSSLIST:{ + struct obj_bsslist *list = r->ptr; + int i, k; + k = snprintf(str, PRIV_STR_SIZE, "nr=%u\n", list->nr); + for (i = 0; i < list->nr; i++) + k += snprintf(str + k, PRIV_STR_SIZE - k, + "bss[%u] :\nage=%u\nchannel=%u\n" + "capinfo=0x%X\nrates=0x%X\n" + "basic_rates=0x%X\n", + i, list->bsslist[i].age, + list->bsslist[i].channel, + list->bsslist[i].capinfo, + list->bsslist[i].rates, + list->bsslist[i].basic_rates); + return k; + } + break; + case OID_TYPE_FREQUENCIES:{ + struct obj_frequencies *freq = r->ptr; + int i, t; + printk("nr : %u\n", freq->nr); + t = snprintf(str, PRIV_STR_SIZE, "nr=%u\n", freq->nr); + for (i = 0; i < freq->nr; i++) + t += snprintf(str + t, PRIV_STR_SIZE - t, + "mhz[%u]=%u\n", i, freq->mhz[i]); + return t; + } + break; + case OID_TYPE_MLME:{ + struct obj_mlme *mlme = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "id=0x%X\nstate=0x%X\ncode=0x%X\n", + mlme->id, mlme->state, mlme->code); + } + break; + case OID_TYPE_MLMEEX:{ + struct obj_mlmeex *mlme = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "id=0x%X\nstate=0x%X\n" + "code=0x%X\nsize=0x%X\n", mlme->id, + mlme->state, mlme->code, mlme->size); + } + break; + case OID_TYPE_ATTACH:{ + struct obj_attachment *attach = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "id=%d\nsize=%d\n", + attach->id, + attach->size); + } + break; + case OID_TYPE_SSID:{ + struct obj_ssid *ssid = r->ptr; + return snprintf(str, PRIV_STR_SIZE, + "length=%u\noctets=%.*s\n", + ssid->length, ssid->length, + ssid->octets); + } + break; + case OID_TYPE_KEY:{ + struct obj_key *key = r->ptr; + int t, i; + t = snprintf(str, PRIV_STR_SIZE, + "type=0x%X\nlength=0x%X\nkey=0x", + key->type, key->length); + for (i = 0; i < key->length; i++) + t += snprintf(str + t, PRIV_STR_SIZE - t, + "%02X:", key->key[i]); + t += snprintf(str + t, PRIV_STR_SIZE - t, "\n"); + return t; + } + break; + case OID_TYPE_RAW: + case OID_TYPE_ADDR:{ + unsigned char *buff = r->ptr; + int t, i; + t = snprintf(str, PRIV_STR_SIZE, "hex data="); + for (i = 0; i < isl_oid[n].size; i++) + t += snprintf(str + t, PRIV_STR_SIZE - t, + "%02X:", buff[i]); + t += snprintf(str + t, PRIV_STR_SIZE - t, "\n"); + return t; + } + break; + default: + BUG(); + } + return 0; +} diff --git a/drivers/net/wireless/intersil/prism54/oid_mgt.h b/drivers/net/wireless/intersil/prism54/oid_mgt.h new file mode 100644 index 000000000..cf5141df8 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/oid_mgt.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2003 Aurelien Alleaume <slts@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#if !defined(_OID_MGT_H) +#define _OID_MGT_H + +#include "isl_oid.h" +#include "islpci_dev.h" + +extern struct oid_t isl_oid[]; + +int mgt_init(islpci_private *); + +void mgt_clean(islpci_private *); + +/* I don't know where to put these 2 */ +extern const int frequency_list_a[]; +int channel_of_freq(int); + +void mgt_le_to_cpu(int, void *); + +int mgt_set_request(islpci_private *, enum oid_num_t, int, void *); +int mgt_set_varlen(islpci_private *, enum oid_num_t, void *, int); + + +int mgt_get_request(islpci_private *, enum oid_num_t, int, void *, + union oid_res_t *); + +int mgt_commit_list(islpci_private *, enum oid_num_t *, int); + +void mgt_set(islpci_private *, enum oid_num_t, void *); + +void mgt_get(islpci_private *, enum oid_num_t, void *); + +int mgt_commit(islpci_private *); + +int mgt_mlme_answer(islpci_private *); + +enum oid_num_t mgt_oidtonum(u32 oid); + +int mgt_response_to_str(enum oid_num_t, union oid_res_t *, char *); + +#endif /* !defined(_OID_MGT_H) */ +/* EOF */ diff --git a/drivers/net/wireless/intersil/prism54/prismcompat.h b/drivers/net/wireless/intersil/prism54/prismcompat.h new file mode 100644 index 000000000..bc1401eb4 --- /dev/null +++ b/drivers/net/wireless/intersil/prism54/prismcompat.h @@ -0,0 +1,42 @@ +/* + * (C) 2004 Margit Schubert-While <margitsw@t-online.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +/* + * Compatibility header file to aid support of different kernel versions + */ + +#ifdef PRISM54_COMPAT24 +#include "prismcompat24.h" +#else /* PRISM54_COMPAT24 */ + +#ifndef _PRISM_COMPAT_H +#define _PRISM_COMPAT_H + +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/moduleparam.h> +#include <linux/workqueue.h> +#include <linux/compiler.h> + +#ifndef __iomem +#define __iomem +#endif + +#define PRISM_FW_PDEV &priv->pdev->dev + +#endif /* _PRISM_COMPAT_H */ +#endif /* PRISM54_COMPAT24 */ |