summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlegacy/3945.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlegacy/3945.c')
-rw-r--r--drivers/net/wireless/iwlegacy/3945.c2741
1 files changed, 2741 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlegacy/3945.c b/drivers/net/wireless/iwlegacy/3945.c
new file mode 100644
index 000000000..93bdf684b
--- /dev/null
+++ b/drivers/net/wireless/iwlegacy/3945.c
@@ -0,0 +1,2741 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <asm/unaligned.h>
+#include <net/mac80211.h>
+
+#include "common.h"
+#include "3945.h"
+
+/* Send led command */
+static int
+il3945_send_led_cmd(struct il_priv *il, struct il_led_cmd *led_cmd)
+{
+ struct il_host_cmd cmd = {
+ .id = C_LEDS,
+ .len = sizeof(struct il_led_cmd),
+ .data = led_cmd,
+ .flags = CMD_ASYNC,
+ .callback = NULL,
+ };
+
+ return il_send_cmd(il, &cmd);
+}
+
+#define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
+ [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \
+ RATE_##r##M_IEEE, \
+ RATE_##ip##M_IDX, \
+ RATE_##in##M_IDX, \
+ RATE_##rp##M_IDX, \
+ RATE_##rn##M_IDX, \
+ RATE_##pp##M_IDX, \
+ RATE_##np##M_IDX, \
+ RATE_##r##M_IDX_TBL, \
+ RATE_##ip##M_IDX_TBL }
+
+/*
+ * Parameter order:
+ * rate, prev rate, next rate, prev tgg rate, next tgg rate
+ *
+ * If there isn't a valid next or previous rate then INV is used which
+ * maps to RATE_INVALID
+ *
+ */
+const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = {
+ IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */
+ IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
+ IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
+ IL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */
+ IL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */
+ IL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */
+ IL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */
+ IL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */
+ IL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */
+ IL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */
+ IL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */
+ IL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV), /* 54mbps */
+};
+
+static inline u8
+il3945_get_prev_ieee_rate(u8 rate_idx)
+{
+ u8 rate = il3945_rates[rate_idx].prev_ieee;
+
+ if (rate == RATE_INVALID)
+ rate = rate_idx;
+ return rate;
+}
+
+/* 1 = enable the il3945_disable_events() function */
+#define IL_EVT_DISABLE (0)
+#define IL_EVT_DISABLE_SIZE (1532/32)
+
+/**
+ * il3945_disable_events - Disable selected events in uCode event log
+ *
+ * Disable an event by writing "1"s into "disable"
+ * bitmap in SRAM. Bit position corresponds to Event # (id/type).
+ * Default values of 0 enable uCode events to be logged.
+ * Use for only special debugging. This function is just a placeholder as-is,
+ * you'll need to provide the special bits! ...
+ * ... and set IL_EVT_DISABLE to 1. */
+void
+il3945_disable_events(struct il_priv *il)
+{
+ int i;
+ u32 base; /* SRAM address of event log header */
+ u32 disable_ptr; /* SRAM address of event-disable bitmap array */
+ u32 array_size; /* # of u32 entries in array */
+ static const u32 evt_disable[IL_EVT_DISABLE_SIZE] = {
+ 0x00000000, /* 31 - 0 Event id numbers */
+ 0x00000000, /* 63 - 32 */
+ 0x00000000, /* 95 - 64 */
+ 0x00000000, /* 127 - 96 */
+ 0x00000000, /* 159 - 128 */
+ 0x00000000, /* 191 - 160 */
+ 0x00000000, /* 223 - 192 */
+ 0x00000000, /* 255 - 224 */
+ 0x00000000, /* 287 - 256 */
+ 0x00000000, /* 319 - 288 */
+ 0x00000000, /* 351 - 320 */
+ 0x00000000, /* 383 - 352 */
+ 0x00000000, /* 415 - 384 */
+ 0x00000000, /* 447 - 416 */
+ 0x00000000, /* 479 - 448 */
+ 0x00000000, /* 511 - 480 */
+ 0x00000000, /* 543 - 512 */
+ 0x00000000, /* 575 - 544 */
+ 0x00000000, /* 607 - 576 */
+ 0x00000000, /* 639 - 608 */
+ 0x00000000, /* 671 - 640 */
+ 0x00000000, /* 703 - 672 */
+ 0x00000000, /* 735 - 704 */
+ 0x00000000, /* 767 - 736 */
+ 0x00000000, /* 799 - 768 */
+ 0x00000000, /* 831 - 800 */
+ 0x00000000, /* 863 - 832 */
+ 0x00000000, /* 895 - 864 */
+ 0x00000000, /* 927 - 896 */
+ 0x00000000, /* 959 - 928 */
+ 0x00000000, /* 991 - 960 */
+ 0x00000000, /* 1023 - 992 */
+ 0x00000000, /* 1055 - 1024 */
+ 0x00000000, /* 1087 - 1056 */
+ 0x00000000, /* 1119 - 1088 */
+ 0x00000000, /* 1151 - 1120 */
+ 0x00000000, /* 1183 - 1152 */
+ 0x00000000, /* 1215 - 1184 */
+ 0x00000000, /* 1247 - 1216 */
+ 0x00000000, /* 1279 - 1248 */
+ 0x00000000, /* 1311 - 1280 */
+ 0x00000000, /* 1343 - 1312 */
+ 0x00000000, /* 1375 - 1344 */
+ 0x00000000, /* 1407 - 1376 */
+ 0x00000000, /* 1439 - 1408 */
+ 0x00000000, /* 1471 - 1440 */
+ 0x00000000, /* 1503 - 1472 */
+ };
+
+ base = le32_to_cpu(il->card_alive.log_event_table_ptr);
+ if (!il3945_hw_valid_rtc_data_addr(base)) {
+ IL_ERR("Invalid event log pointer 0x%08X\n", base);
+ return;
+ }
+
+ disable_ptr = il_read_targ_mem(il, base + (4 * sizeof(u32)));
+ array_size = il_read_targ_mem(il, base + (5 * sizeof(u32)));
+
+ if (IL_EVT_DISABLE && array_size == IL_EVT_DISABLE_SIZE) {
+ D_INFO("Disabling selected uCode log events at 0x%x\n",
+ disable_ptr);
+ for (i = 0; i < IL_EVT_DISABLE_SIZE; i++)
+ il_write_targ_mem(il, disable_ptr + (i * sizeof(u32)),
+ evt_disable[i]);
+
+ } else {
+ D_INFO("Selected uCode log events may be disabled\n");
+ D_INFO(" by writing \"1\"s into disable bitmap\n");
+ D_INFO(" in SRAM at 0x%x, size %d u32s\n", disable_ptr,
+ array_size);
+ }
+
+}
+
+static int
+il3945_hwrate_to_plcp_idx(u8 plcp)
+{
+ int idx;
+
+ for (idx = 0; idx < RATE_COUNT_3945; idx++)
+ if (il3945_rates[idx].plcp == plcp)
+ return idx;
+ return -1;
+}
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
+
+static const char *
+il3945_get_tx_fail_reason(u32 status)
+{
+ switch (status & TX_STATUS_MSK) {
+ case TX_3945_STATUS_SUCCESS:
+ return "SUCCESS";
+ TX_STATUS_ENTRY(SHORT_LIMIT);
+ TX_STATUS_ENTRY(LONG_LIMIT);
+ TX_STATUS_ENTRY(FIFO_UNDERRUN);
+ TX_STATUS_ENTRY(MGMNT_ABORT);
+ TX_STATUS_ENTRY(NEXT_FRAG);
+ TX_STATUS_ENTRY(LIFE_EXPIRE);
+ TX_STATUS_ENTRY(DEST_PS);
+ TX_STATUS_ENTRY(ABORTED);
+ TX_STATUS_ENTRY(BT_RETRY);
+ TX_STATUS_ENTRY(STA_INVALID);
+ TX_STATUS_ENTRY(FRAG_DROPPED);
+ TX_STATUS_ENTRY(TID_DISABLE);
+ TX_STATUS_ENTRY(FRAME_FLUSHED);
+ TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
+ TX_STATUS_ENTRY(TX_LOCKED);
+ TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
+ }
+
+ return "UNKNOWN";
+}
+#else
+static inline const char *
+il3945_get_tx_fail_reason(u32 status)
+{
+ return "";
+}
+#endif
+
+/*
+ * get ieee prev rate from rate scale table.
+ * for A and B mode we need to overright prev
+ * value
+ */
+int
+il3945_rs_next_rate(struct il_priv *il, int rate)
+{
+ int next_rate = il3945_get_prev_ieee_rate(rate);
+
+ switch (il->band) {
+ case IEEE80211_BAND_5GHZ:
+ if (rate == RATE_12M_IDX)
+ next_rate = RATE_9M_IDX;
+ else if (rate == RATE_6M_IDX)
+ next_rate = RATE_6M_IDX;
+ break;
+ case IEEE80211_BAND_2GHZ:
+ if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
+ il_is_associated(il)) {
+ if (rate == RATE_11M_IDX)
+ next_rate = RATE_5M_IDX;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return next_rate;
+}
+
+/**
+ * il3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
+ *
+ * When FW advances 'R' idx, all entries between old and new 'R' idx
+ * need to be reclaimed. As result, some free space forms. If there is
+ * enough free space (> low mark), wake the stack that feeds us.
+ */
+static void
+il3945_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx)
+{
+ struct il_tx_queue *txq = &il->txq[txq_id];
+ struct il_queue *q = &txq->q;
+ struct sk_buff *skb;
+
+ BUG_ON(txq_id == IL39_CMD_QUEUE_NUM);
+
+ for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
+ q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
+
+ skb = txq->skbs[txq->q.read_ptr];
+ ieee80211_tx_status_irqsafe(il->hw, skb);
+ txq->skbs[txq->q.read_ptr] = NULL;
+ il->ops->txq_free_tfd(il, txq);
+ }
+
+ if (il_queue_space(q) > q->low_mark && txq_id >= 0 &&
+ txq_id != IL39_CMD_QUEUE_NUM && il->mac80211_registered)
+ il_wake_queue(il, txq);
+}
+
+/**
+ * il3945_hdl_tx - Handle Tx response
+ */
+static void
+il3945_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ u16 sequence = le16_to_cpu(pkt->hdr.sequence);
+ int txq_id = SEQ_TO_QUEUE(sequence);
+ int idx = SEQ_TO_IDX(sequence);
+ struct il_tx_queue *txq = &il->txq[txq_id];
+ struct ieee80211_tx_info *info;
+ struct il3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
+ u32 status = le32_to_cpu(tx_resp->status);
+ int rate_idx;
+ int fail;
+
+ if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
+ IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
+ "is out of range [0-%d] %d %d\n", txq_id, idx,
+ txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr);
+ return;
+ }
+
+ /*
+ * Firmware will not transmit frame on passive channel, if it not yet
+ * received some valid frame on that channel. When this error happen
+ * we have to wait until firmware will unblock itself i.e. when we
+ * note received beacon or other frame. We unblock queues in
+ * il3945_pass_packet_to_mac80211 or in il_mac_bss_info_changed.
+ */
+ if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) &&
+ il->iw_mode == NL80211_IFTYPE_STATION) {
+ il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
+ D_INFO("Stopped queues - RX waiting on passive channel\n");
+ }
+
+ txq->time_stamp = jiffies;
+ info = IEEE80211_SKB_CB(txq->skbs[txq->q.read_ptr]);
+ ieee80211_tx_info_clear_status(info);
+
+ /* Fill the MRR chain with some info about on-chip retransmissions */
+ rate_idx = il3945_hwrate_to_plcp_idx(tx_resp->rate);
+ if (info->band == IEEE80211_BAND_5GHZ)
+ rate_idx -= IL_FIRST_OFDM_RATE;
+
+ fail = tx_resp->failure_frame;
+
+ info->status.rates[0].idx = rate_idx;
+ info->status.rates[0].count = fail + 1; /* add final attempt */
+
+ /* tx_status->rts_retry_count = tx_resp->failure_rts; */
+ info->flags |=
+ ((status & TX_STATUS_MSK) ==
+ TX_STATUS_SUCCESS) ? IEEE80211_TX_STAT_ACK : 0;
+
+ D_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", txq_id,
+ il3945_get_tx_fail_reason(status), status, tx_resp->rate,
+ tx_resp->failure_frame);
+
+ D_TX_REPLY("Tx queue reclaim %d\n", idx);
+ il3945_tx_queue_reclaim(il, txq_id, idx);
+
+ if (status & TX_ABORT_REQUIRED_MSK)
+ IL_ERR("TODO: Implement Tx ABORT REQUIRED!!!\n");
+}
+
+/*****************************************************************************
+ *
+ * Intel PRO/Wireless 3945ABG/BG Network Connection
+ *
+ * RX handler implementations
+ *
+ *****************************************************************************/
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+static void
+il3945_accumulative_stats(struct il_priv *il, __le32 * stats)
+{
+ int i;
+ __le32 *prev_stats;
+ u32 *accum_stats;
+ u32 *delta, *max_delta;
+
+ prev_stats = (__le32 *) &il->_3945.stats;
+ accum_stats = (u32 *) &il->_3945.accum_stats;
+ delta = (u32 *) &il->_3945.delta_stats;
+ max_delta = (u32 *) &il->_3945.max_delta;
+
+ for (i = sizeof(__le32); i < sizeof(struct il3945_notif_stats);
+ i +=
+ sizeof(__le32), stats++, prev_stats++, delta++, max_delta++,
+ accum_stats++) {
+ if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
+ *delta =
+ (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats));
+ *accum_stats += *delta;
+ if (*delta > *max_delta)
+ *max_delta = *delta;
+ }
+ }
+
+ /* reset accumulative stats for "no-counter" type stats */
+ il->_3945.accum_stats.general.temperature =
+ il->_3945.stats.general.temperature;
+ il->_3945.accum_stats.general.ttl_timestamp =
+ il->_3945.stats.general.ttl_timestamp;
+}
+#endif
+
+void
+il3945_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+
+ D_RX("Statistics notification received (%d vs %d).\n",
+ (int)sizeof(struct il3945_notif_stats),
+ le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK);
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ il3945_accumulative_stats(il, (__le32 *) &pkt->u.raw);
+#endif
+
+ memcpy(&il->_3945.stats, pkt->u.raw, sizeof(il->_3945.stats));
+}
+
+void
+il3945_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ __le32 *flag = (__le32 *) &pkt->u.raw;
+
+ if (le32_to_cpu(*flag) & UCODE_STATS_CLEAR_MSK) {
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ memset(&il->_3945.accum_stats, 0,
+ sizeof(struct il3945_notif_stats));
+ memset(&il->_3945.delta_stats, 0,
+ sizeof(struct il3945_notif_stats));
+ memset(&il->_3945.max_delta, 0,
+ sizeof(struct il3945_notif_stats));
+#endif
+ D_RX("Statistics have been cleared\n");
+ }
+ il3945_hdl_stats(il, rxb);
+}
+
+/******************************************************************************
+ *
+ * Misc. internal state and helper functions
+ *
+ ******************************************************************************/
+
+/* This is necessary only for a number of stats, see the caller. */
+static int
+il3945_is_network_packet(struct il_priv *il, struct ieee80211_hdr *header)
+{
+ /* Filter incoming packets to determine if they are targeted toward
+ * this network, discarding packets coming from ourselves */
+ switch (il->iw_mode) {
+ case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */
+ /* packets to our IBSS update information */
+ return ether_addr_equal_64bits(header->addr3, il->bssid);
+ case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
+ /* packets to our IBSS update information */
+ return ether_addr_equal_64bits(header->addr2, il->bssid);
+ default:
+ return 1;
+ }
+}
+
+#define SMALL_PACKET_SIZE 256
+
+static void
+il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb,
+ struct ieee80211_rx_status *stats)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
+ struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
+ struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
+ u32 len = le16_to_cpu(rx_hdr->len);
+ struct sk_buff *skb;
+ __le16 fc = hdr->frame_control;
+ u32 fraglen = PAGE_SIZE << il->hw_params.rx_page_order;
+
+ /* We received data from the HW, so stop the watchdog */
+ if (unlikely(len + IL39_RX_FRAME_SIZE > fraglen)) {
+ D_DROP("Corruption detected!\n");
+ return;
+ }
+
+ /* We only process data packets if the interface is open */
+ if (unlikely(!il->is_open)) {
+ D_DROP("Dropping packet while interface is not open.\n");
+ return;
+ }
+
+ if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) {
+ il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
+ D_INFO("Woke queues - frame received on passive channel\n");
+ }
+
+ skb = dev_alloc_skb(SMALL_PACKET_SIZE);
+ if (!skb) {
+ IL_ERR("dev_alloc_skb failed\n");
+ return;
+ }
+
+ if (!il3945_mod_params.sw_crypto)
+ il_set_decrypted_flag(il, (struct ieee80211_hdr *)pkt,
+ le32_to_cpu(rx_end->status), stats);
+
+ /* If frame is small enough to fit into skb->head, copy it
+ * and do not consume a full page
+ */
+ if (len <= SMALL_PACKET_SIZE) {
+ memcpy(skb_put(skb, len), rx_hdr->payload, len);
+ } else {
+ skb_add_rx_frag(skb, 0, rxb->page,
+ (void *)rx_hdr->payload - (void *)pkt, len,
+ fraglen);
+ il->alloc_rxb_page--;
+ rxb->page = NULL;
+ }
+ il_update_stats(il, false, fc, len);
+ memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
+
+ ieee80211_rx(il->hw, skb);
+}
+
+#define IL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
+
+static void
+il3945_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct ieee80211_hdr *header;
+ struct ieee80211_rx_status rx_status = {};
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il3945_rx_frame_stats *rx_stats = IL_RX_STATS(pkt);
+ struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
+ struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
+ u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
+ u16 rx_stats_noise_diff __maybe_unused =
+ le16_to_cpu(rx_stats->noise_diff);
+ u8 network_packet;
+
+ rx_status.flag = 0;
+ rx_status.mactime = le64_to_cpu(rx_end->timestamp);
+ rx_status.band =
+ (rx_hdr->
+ phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? IEEE80211_BAND_2GHZ :
+ IEEE80211_BAND_5GHZ;
+ rx_status.freq =
+ ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel),
+ rx_status.band);
+
+ rx_status.rate_idx = il3945_hwrate_to_plcp_idx(rx_hdr->rate);
+ if (rx_status.band == IEEE80211_BAND_5GHZ)
+ rx_status.rate_idx -= IL_FIRST_OFDM_RATE;
+
+ rx_status.antenna =
+ (le16_to_cpu(rx_hdr->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >>
+ 4;
+
+ /* set the preamble flag if appropriate */
+ if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
+ rx_status.flag |= RX_FLAG_SHORTPRE;
+
+ if ((unlikely(rx_stats->phy_count > 20))) {
+ D_DROP("dsp size out of range [0,20]: %d\n",
+ rx_stats->phy_count);
+ return;
+ }
+
+ if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) ||
+ !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
+ D_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
+ return;
+ }
+
+ /* Convert 3945's rssi indicator to dBm */
+ rx_status.signal = rx_stats->rssi - IL39_RSSI_OFFSET;
+
+ D_STATS("Rssi %d sig_avg %d noise_diff %d\n", rx_status.signal,
+ rx_stats_sig_avg, rx_stats_noise_diff);
+
+ header = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
+
+ network_packet = il3945_is_network_packet(il, header);
+
+ D_STATS("[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
+ network_packet ? '*' : ' ', le16_to_cpu(rx_hdr->channel),
+ rx_status.signal, rx_status.signal, rx_status.rate_idx);
+
+ if (network_packet) {
+ il->_3945.last_beacon_time =
+ le32_to_cpu(rx_end->beacon_timestamp);
+ il->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
+ il->_3945.last_rx_rssi = rx_status.signal;
+ }
+
+ il3945_pass_packet_to_mac80211(il, rxb, &rx_status);
+}
+
+int
+il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
+ dma_addr_t addr, u16 len, u8 reset, u8 pad)
+{
+ int count;
+ struct il_queue *q;
+ struct il3945_tfd *tfd, *tfd_tmp;
+
+ q = &txq->q;
+ tfd_tmp = (struct il3945_tfd *)txq->tfds;
+ tfd = &tfd_tmp[q->write_ptr];
+
+ if (reset)
+ memset(tfd, 0, sizeof(*tfd));
+
+ count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
+
+ if (count >= NUM_TFD_CHUNKS || count < 0) {
+ IL_ERR("Error can not send more than %d chunks\n",
+ NUM_TFD_CHUNKS);
+ return -EINVAL;
+ }
+
+ tfd->tbs[count].addr = cpu_to_le32(addr);
+ tfd->tbs[count].len = cpu_to_le32(len);
+
+ count++;
+
+ tfd->control_flags =
+ cpu_to_le32(TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad));
+
+ return 0;
+}
+
+/**
+ * il3945_hw_txq_free_tfd - Free one TFD, those at idx [txq->q.read_ptr]
+ *
+ * Does NOT advance any idxes
+ */
+void
+il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
+{
+ struct il3945_tfd *tfd_tmp = (struct il3945_tfd *)txq->tfds;
+ int idx = txq->q.read_ptr;
+ struct il3945_tfd *tfd = &tfd_tmp[idx];
+ struct pci_dev *dev = il->pci_dev;
+ int i;
+ int counter;
+
+ /* sanity check */
+ counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
+ if (counter > NUM_TFD_CHUNKS) {
+ IL_ERR("Too many chunks: %i\n", counter);
+ /* @todo issue fatal error, it is quite serious situation */
+ return;
+ }
+
+ /* Unmap tx_cmd */
+ if (counter)
+ pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping),
+ dma_unmap_len(&txq->meta[idx], len),
+ PCI_DMA_TODEVICE);
+
+ /* unmap chunks if any */
+
+ for (i = 1; i < counter; i++)
+ pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
+ le32_to_cpu(tfd->tbs[i].len),
+ PCI_DMA_TODEVICE);
+
+ /* free SKB */
+ if (txq->skbs) {
+ struct sk_buff *skb = txq->skbs[txq->q.read_ptr];
+
+ /* can be called from irqs-disabled context */
+ if (skb) {
+ dev_kfree_skb_any(skb);
+ txq->skbs[txq->q.read_ptr] = NULL;
+ }
+ }
+}
+
+/**
+ * il3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
+ *
+*/
+void
+il3945_hw_build_tx_cmd_rate(struct il_priv *il, struct il_device_cmd *cmd,
+ struct ieee80211_tx_info *info,
+ struct ieee80211_hdr *hdr, int sta_id)
+{
+ u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value;
+ u16 rate_idx = min(hw_value & 0xffff, RATE_COUNT_3945 - 1);
+ u16 rate_mask;
+ int rate;
+ const u8 rts_retry_limit = 7;
+ u8 data_retry_limit;
+ __le32 tx_flags;
+ __le16 fc = hdr->frame_control;
+ struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
+
+ rate = il3945_rates[rate_idx].plcp;
+ tx_flags = tx_cmd->tx_flags;
+
+ /* We need to figure out how to get the sta->supp_rates while
+ * in this running context */
+ rate_mask = RATES_MASK_3945;
+
+ /* Set retry limit on DATA packets and Probe Responses */
+ if (ieee80211_is_probe_resp(fc))
+ data_retry_limit = 3;
+ else
+ data_retry_limit = IL_DEFAULT_TX_RETRY;
+ tx_cmd->data_retry_limit = data_retry_limit;
+ /* Set retry limit on RTS packets */
+ tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit);
+
+ tx_cmd->rate = rate;
+ tx_cmd->tx_flags = tx_flags;
+
+ /* OFDM */
+ tx_cmd->supp_rates[0] =
+ ((rate_mask & IL_OFDM_RATES_MASK) >> IL_FIRST_OFDM_RATE) & 0xFF;
+
+ /* CCK */
+ tx_cmd->supp_rates[1] = (rate_mask & 0xF);
+
+ D_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
+ "cck/ofdm mask: 0x%x/0x%x\n", sta_id, tx_cmd->rate,
+ le32_to_cpu(tx_cmd->tx_flags), tx_cmd->supp_rates[1],
+ tx_cmd->supp_rates[0]);
+}
+
+static u8
+il3945_sync_sta(struct il_priv *il, int sta_id, u16 tx_rate)
+{
+ unsigned long flags_spin;
+ struct il_station_entry *station;
+
+ if (sta_id == IL_INVALID_STATION)
+ return IL_INVALID_STATION;
+
+ spin_lock_irqsave(&il->sta_lock, flags_spin);
+ station = &il->stations[sta_id];
+
+ station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
+ station->sta.rate_n_flags = cpu_to_le16(tx_rate);
+ station->sta.mode = STA_CONTROL_MODIFY_MSK;
+ il_send_add_sta(il, &station->sta, CMD_ASYNC);
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+
+ D_RATE("SCALE sync station %d to rate %d\n", sta_id, tx_rate);
+ return sta_id;
+}
+
+static void
+il3945_set_pwr_vmain(struct il_priv *il)
+{
+/*
+ * (for documentation purposes)
+ * to set power to V_AUX, do
+
+ if (pci_pme_capable(il->pci_dev, PCI_D3cold)) {
+ il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+
+ _il_poll_bit(il, CSR_GPIO_IN,
+ CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
+ CSR_GPIO_IN_BIT_AUX_POWER, 5000);
+ }
+ */
+
+ il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+
+ _il_poll_bit(il, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
+ CSR_GPIO_IN_BIT_AUX_POWER, 5000);
+}
+
+static int
+il3945_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
+{
+ il_wr(il, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
+ il_wr(il, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma);
+ il_wr(il, FH39_RCSR_WPTR(0), 0);
+ il_wr(il, FH39_RCSR_CONFIG(0),
+ FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
+ FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
+ FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
+ FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | (RX_QUEUE_SIZE_LOG
+ <<
+ FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE)
+ | FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | (1 <<
+ FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH)
+ | FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
+
+ /* fake read to flush all prev I/O */
+ il_rd(il, FH39_RSSR_CTRL);
+
+ return 0;
+}
+
+static int
+il3945_tx_reset(struct il_priv *il)
+{
+ /* bypass mode */
+ il_wr_prph(il, ALM_SCD_MODE_REG, 0x2);
+
+ /* RA 0 is active */
+ il_wr_prph(il, ALM_SCD_ARASTAT_REG, 0x01);
+
+ /* all 6 fifo are active */
+ il_wr_prph(il, ALM_SCD_TXFACT_REG, 0x3f);
+
+ il_wr_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
+ il_wr_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
+ il_wr_prph(il, ALM_SCD_TXF4MF_REG, 0x000004);
+ il_wr_prph(il, ALM_SCD_TXF5MF_REG, 0x000005);
+
+ il_wr(il, FH39_TSSR_CBB_BASE, il->_3945.shared_phys);
+
+ il_wr(il, FH39_TSSR_MSG_CONFIG,
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
+
+ return 0;
+}
+
+/**
+ * il3945_txq_ctx_reset - Reset TX queue context
+ *
+ * Destroys all DMA structures and initialize them again
+ */
+static int
+il3945_txq_ctx_reset(struct il_priv *il)
+{
+ int rc, txq_id;
+
+ il3945_hw_txq_ctx_free(il);
+
+ /* allocate tx queue structure */
+ rc = il_alloc_txq_mem(il);
+ if (rc)
+ return rc;
+
+ /* Tx CMD queue */
+ rc = il3945_tx_reset(il);
+ if (rc)
+ goto error;
+
+ /* Tx queue(s) */
+ for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
+ rc = il_tx_queue_init(il, txq_id);
+ if (rc) {
+ IL_ERR("Tx %d queue init failed\n", txq_id);
+ goto error;
+ }
+ }
+
+ return rc;
+
+error:
+ il3945_hw_txq_ctx_free(il);
+ return rc;
+}
+
+/*
+ * Start up 3945's basic functionality after it has been reset
+ * (e.g. after platform boot, or shutdown via il_apm_stop())
+ * NOTE: This does not load uCode nor start the embedded processor
+ */
+static int
+il3945_apm_init(struct il_priv *il)
+{
+ int ret = il_apm_init(il);
+
+ /* Clear APMG (NIC's internal power management) interrupts */
+ il_wr_prph(il, APMG_RTC_INT_MSK_REG, 0x0);
+ il_wr_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
+
+ /* Reset radio chip */
+ il_set_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
+ udelay(5);
+ il_clear_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
+
+ return ret;
+}
+
+static void
+il3945_nic_config(struct il_priv *il)
+{
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ unsigned long flags;
+ u8 rev_id = il->pci_dev->revision;
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ /* Determine HW type */
+ D_INFO("HW Revision ID = 0x%X\n", rev_id);
+
+ if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
+ D_INFO("RTP type\n");
+ else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
+ D_INFO("3945 RADIO-MB type\n");
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
+ } else {
+ D_INFO("3945 RADIO-MM type\n");
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
+ }
+
+ if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
+ D_INFO("SKU OP mode is mrc\n");
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
+ } else
+ D_INFO("SKU OP mode is basic\n");
+
+ if ((eeprom->board_revision & 0xF0) == 0xD0) {
+ D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision);
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
+ } else {
+ D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision);
+ il_clear_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
+ }
+
+ if (eeprom->almgor_m_version <= 1) {
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
+ D_INFO("Card M type A version is 0x%X\n",
+ eeprom->almgor_m_version);
+ } else {
+ D_INFO("Card M type B version is 0x%X\n",
+ eeprom->almgor_m_version);
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
+ }
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
+ D_RF_KILL("SW RF KILL supported in EEPROM.\n");
+
+ if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
+ D_RF_KILL("HW RF KILL supported in EEPROM.\n");
+}
+
+int
+il3945_hw_nic_init(struct il_priv *il)
+{
+ int rc;
+ unsigned long flags;
+ struct il_rx_queue *rxq = &il->rxq;
+
+ spin_lock_irqsave(&il->lock, flags);
+ il3945_apm_init(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ il3945_set_pwr_vmain(il);
+ il3945_nic_config(il);
+
+ /* Allocate the RX queue, or reset if it is already allocated */
+ if (!rxq->bd) {
+ rc = il_rx_queue_alloc(il);
+ if (rc) {
+ IL_ERR("Unable to initialize Rx queue\n");
+ return -ENOMEM;
+ }
+ } else
+ il3945_rx_queue_reset(il, rxq);
+
+ il3945_rx_replenish(il);
+
+ il3945_rx_init(il, rxq);
+
+ /* Look at using this instead:
+ rxq->need_update = 1;
+ il_rx_queue_update_write_ptr(il, rxq);
+ */
+
+ il_wr(il, FH39_RCSR_WPTR(0), rxq->write & ~7);
+
+ rc = il3945_txq_ctx_reset(il);
+ if (rc)
+ return rc;
+
+ set_bit(S_INIT, &il->status);
+
+ return 0;
+}
+
+/**
+ * il3945_hw_txq_ctx_free - Free TXQ Context
+ *
+ * Destroy all TX DMA queues and structures
+ */
+void
+il3945_hw_txq_ctx_free(struct il_priv *il)
+{
+ int txq_id;
+
+ /* Tx queues */
+ if (il->txq)
+ for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
+ if (txq_id == IL39_CMD_QUEUE_NUM)
+ il_cmd_queue_free(il);
+ else
+ il_tx_queue_free(il, txq_id);
+
+ /* free tx queue structure */
+ il_free_txq_mem(il);
+}
+
+void
+il3945_hw_txq_ctx_stop(struct il_priv *il)
+{
+ int txq_id;
+
+ /* stop SCD */
+ _il_wr_prph(il, ALM_SCD_MODE_REG, 0);
+ _il_wr_prph(il, ALM_SCD_TXFACT_REG, 0);
+
+ /* reset TFD queues */
+ for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
+ _il_wr(il, FH39_TCSR_CONFIG(txq_id), 0x0);
+ _il_poll_bit(il, FH39_TSSR_TX_STATUS,
+ FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
+ FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
+ 1000);
+ }
+}
+
+/**
+ * il3945_hw_reg_adjust_power_by_temp
+ * return idx delta into power gain settings table
+*/
+static int
+il3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
+{
+ return (new_reading - old_reading) * (-11) / 100;
+}
+
+/**
+ * il3945_hw_reg_temp_out_of_range - Keep temperature in sane range
+ */
+static inline int
+il3945_hw_reg_temp_out_of_range(int temperature)
+{
+ return (temperature < -260 || temperature > 25) ? 1 : 0;
+}
+
+int
+il3945_hw_get_temperature(struct il_priv *il)
+{
+ return _il_rd(il, CSR_UCODE_DRV_GP2);
+}
+
+/**
+ * il3945_hw_reg_txpower_get_temperature
+ * get the current temperature by reading from NIC
+*/
+static int
+il3945_hw_reg_txpower_get_temperature(struct il_priv *il)
+{
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ int temperature;
+
+ temperature = il3945_hw_get_temperature(il);
+
+ /* driver's okay range is -260 to +25.
+ * human readable okay range is 0 to +285 */
+ D_INFO("Temperature: %d\n", temperature + IL_TEMP_CONVERT);
+
+ /* handle insane temp reading */
+ if (il3945_hw_reg_temp_out_of_range(temperature)) {
+ IL_ERR("Error bad temperature value %d\n", temperature);
+
+ /* if really really hot(?),
+ * substitute the 3rd band/group's temp measured at factory */
+ if (il->last_temperature > 100)
+ temperature = eeprom->groups[2].temperature;
+ else /* else use most recent "sane" value from driver */
+ temperature = il->last_temperature;
+ }
+
+ return temperature; /* raw, not "human readable" */
+}
+
+/* Adjust Txpower only if temperature variance is greater than threshold.
+ *
+ * Both are lower than older versions' 9 degrees */
+#define IL_TEMPERATURE_LIMIT_TIMER 6
+
+/**
+ * il3945_is_temp_calib_needed - determines if new calibration is needed
+ *
+ * records new temperature in tx_mgr->temperature.
+ * replaces tx_mgr->last_temperature *only* if calib needed
+ * (assumes caller will actually do the calibration!). */
+static int
+il3945_is_temp_calib_needed(struct il_priv *il)
+{
+ int temp_diff;
+
+ il->temperature = il3945_hw_reg_txpower_get_temperature(il);
+ temp_diff = il->temperature - il->last_temperature;
+
+ /* get absolute value */
+ if (temp_diff < 0) {
+ D_POWER("Getting cooler, delta %d,\n", temp_diff);
+ temp_diff = -temp_diff;
+ } else if (temp_diff == 0)
+ D_POWER("Same temp,\n");
+ else
+ D_POWER("Getting warmer, delta %d,\n", temp_diff);
+
+ /* if we don't need calibration, *don't* update last_temperature */
+ if (temp_diff < IL_TEMPERATURE_LIMIT_TIMER) {
+ D_POWER("Timed thermal calib not needed\n");
+ return 0;
+ }
+
+ D_POWER("Timed thermal calib needed\n");
+
+ /* assume that caller will actually do calib ...
+ * update the "last temperature" value */
+ il->last_temperature = il->temperature;
+ return 1;
+}
+
+#define IL_MAX_GAIN_ENTRIES 78
+#define IL_CCK_FROM_OFDM_POWER_DIFF -5
+#define IL_CCK_FROM_OFDM_IDX_DIFF (10)
+
+/* radio and DSP power table, each step is 1/2 dB.
+ * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
+static struct il3945_tx_power power_gain_table[2][IL_MAX_GAIN_ENTRIES] = {
+ {
+ {251, 127}, /* 2.4 GHz, highest power */
+ {251, 127},
+ {251, 127},
+ {251, 127},
+ {251, 125},
+ {251, 110},
+ {251, 105},
+ {251, 98},
+ {187, 125},
+ {187, 115},
+ {187, 108},
+ {187, 99},
+ {243, 119},
+ {243, 111},
+ {243, 105},
+ {243, 97},
+ {243, 92},
+ {211, 106},
+ {211, 100},
+ {179, 120},
+ {179, 113},
+ {179, 107},
+ {147, 125},
+ {147, 119},
+ {147, 112},
+ {147, 106},
+ {147, 101},
+ {147, 97},
+ {147, 91},
+ {115, 107},
+ {235, 121},
+ {235, 115},
+ {235, 109},
+ {203, 127},
+ {203, 121},
+ {203, 115},
+ {203, 108},
+ {203, 102},
+ {203, 96},
+ {203, 92},
+ {171, 110},
+ {171, 104},
+ {171, 98},
+ {139, 116},
+ {227, 125},
+ {227, 119},
+ {227, 113},
+ {227, 107},
+ {227, 101},
+ {227, 96},
+ {195, 113},
+ {195, 106},
+ {195, 102},
+ {195, 95},
+ {163, 113},
+ {163, 106},
+ {163, 102},
+ {163, 95},
+ {131, 113},
+ {131, 106},
+ {131, 102},
+ {131, 95},
+ {99, 113},
+ {99, 106},
+ {99, 102},
+ {99, 95},
+ {67, 113},
+ {67, 106},
+ {67, 102},
+ {67, 95},
+ {35, 113},
+ {35, 106},
+ {35, 102},
+ {35, 95},
+ {3, 113},
+ {3, 106},
+ {3, 102},
+ {3, 95} /* 2.4 GHz, lowest power */
+ },
+ {
+ {251, 127}, /* 5.x GHz, highest power */
+ {251, 120},
+ {251, 114},
+ {219, 119},
+ {219, 101},
+ {187, 113},
+ {187, 102},
+ {155, 114},
+ {155, 103},
+ {123, 117},
+ {123, 107},
+ {123, 99},
+ {123, 92},
+ {91, 108},
+ {59, 125},
+ {59, 118},
+ {59, 109},
+ {59, 102},
+ {59, 96},
+ {59, 90},
+ {27, 104},
+ {27, 98},
+ {27, 92},
+ {115, 118},
+ {115, 111},
+ {115, 104},
+ {83, 126},
+ {83, 121},
+ {83, 113},
+ {83, 105},
+ {83, 99},
+ {51, 118},
+ {51, 111},
+ {51, 104},
+ {51, 98},
+ {19, 116},
+ {19, 109},
+ {19, 102},
+ {19, 98},
+ {19, 93},
+ {171, 113},
+ {171, 107},
+ {171, 99},
+ {139, 120},
+ {139, 113},
+ {139, 107},
+ {139, 99},
+ {107, 120},
+ {107, 113},
+ {107, 107},
+ {107, 99},
+ {75, 120},
+ {75, 113},
+ {75, 107},
+ {75, 99},
+ {43, 120},
+ {43, 113},
+ {43, 107},
+ {43, 99},
+ {11, 120},
+ {11, 113},
+ {11, 107},
+ {11, 99},
+ {131, 107},
+ {131, 99},
+ {99, 120},
+ {99, 113},
+ {99, 107},
+ {99, 99},
+ {67, 120},
+ {67, 113},
+ {67, 107},
+ {67, 99},
+ {35, 120},
+ {35, 113},
+ {35, 107},
+ {35, 99},
+ {3, 120} /* 5.x GHz, lowest power */
+ }
+};
+
+static inline u8
+il3945_hw_reg_fix_power_idx(int idx)
+{
+ if (idx < 0)
+ return 0;
+ if (idx >= IL_MAX_GAIN_ENTRIES)
+ return IL_MAX_GAIN_ENTRIES - 1;
+ return (u8) idx;
+}
+
+/* Kick off thermal recalibration check every 60 seconds */
+#define REG_RECALIB_PERIOD (60)
+
+/**
+ * il3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
+ *
+ * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
+ * or 6 Mbit (OFDM) rates.
+ */
+static void
+il3945_hw_reg_set_scan_power(struct il_priv *il, u32 scan_tbl_idx, s32 rate_idx,
+ const s8 *clip_pwrs,
+ struct il_channel_info *ch_info, int band_idx)
+{
+ struct il3945_scan_power_info *scan_power_info;
+ s8 power;
+ u8 power_idx;
+
+ scan_power_info = &ch_info->scan_pwr_info[scan_tbl_idx];
+
+ /* use this channel group's 6Mbit clipping/saturation pwr,
+ * but cap at regulatory scan power restriction (set during init
+ * based on eeprom channel data) for this channel. */
+ power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TBL]);
+
+ power = min(power, il->tx_power_user_lmt);
+ scan_power_info->requested_power = power;
+
+ /* find difference between new scan *power* and current "normal"
+ * Tx *power* for 6Mb. Use this difference (x2) to adjust the
+ * current "normal" temperature-compensated Tx power *idx* for
+ * this rate (1Mb or 6Mb) to yield new temp-compensated scan power
+ * *idx*. */
+ power_idx =
+ ch_info->power_info[rate_idx].power_table_idx - (power -
+ ch_info->
+ power_info
+ [RATE_6M_IDX_TBL].
+ requested_power) *
+ 2;
+
+ /* store reference idx that we use when adjusting *all* scan
+ * powers. So we can accommodate user (all channel) or spectrum
+ * management (single channel) power changes "between" temperature
+ * feedback compensation procedures.
+ * don't force fit this reference idx into gain table; it may be a
+ * negative number. This will help avoid errors when we're at
+ * the lower bounds (highest gains, for warmest temperatures)
+ * of the table. */
+
+ /* don't exceed table bounds for "real" setting */
+ power_idx = il3945_hw_reg_fix_power_idx(power_idx);
+
+ scan_power_info->power_table_idx = power_idx;
+ scan_power_info->tpc.tx_gain =
+ power_gain_table[band_idx][power_idx].tx_gain;
+ scan_power_info->tpc.dsp_atten =
+ power_gain_table[band_idx][power_idx].dsp_atten;
+}
+
+/**
+ * il3945_send_tx_power - fill in Tx Power command with gain settings
+ *
+ * Configures power settings for all rates for the current channel,
+ * using values from channel info struct, and send to NIC
+ */
+static int
+il3945_send_tx_power(struct il_priv *il)
+{
+ int rate_idx, i;
+ const struct il_channel_info *ch_info = NULL;
+ struct il3945_txpowertable_cmd txpower = {
+ .channel = il->active.channel,
+ };
+ u16 chan;
+
+ if (WARN_ONCE
+ (test_bit(S_SCAN_HW, &il->status),
+ "TX Power requested while scanning!\n"))
+ return -EAGAIN;
+
+ chan = le16_to_cpu(il->active.channel);
+
+ txpower.band = (il->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
+ ch_info = il_get_channel_info(il, il->band, chan);
+ if (!ch_info) {
+ IL_ERR("Failed to get channel info for channel %d [%d]\n", chan,
+ il->band);
+ return -EINVAL;
+ }
+
+ if (!il_is_channel_valid(ch_info)) {
+ D_POWER("Not calling TX_PWR_TBL_CMD on " "non-Tx channel.\n");
+ return 0;
+ }
+
+ /* fill cmd with power settings for all rates for current channel */
+ /* Fill OFDM rate */
+ for (rate_idx = IL_FIRST_OFDM_RATE, i = 0;
+ rate_idx <= IL39_LAST_OFDM_RATE; rate_idx++, i++) {
+
+ txpower.power[i].tpc = ch_info->power_info[i].tpc;
+ txpower.power[i].rate = il3945_rates[rate_idx].plcp;
+
+ D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
+ le16_to_cpu(txpower.channel), txpower.band,
+ txpower.power[i].tpc.tx_gain,
+ txpower.power[i].tpc.dsp_atten, txpower.power[i].rate);
+ }
+ /* Fill CCK rates */
+ for (rate_idx = IL_FIRST_CCK_RATE; rate_idx <= IL_LAST_CCK_RATE;
+ rate_idx++, i++) {
+ txpower.power[i].tpc = ch_info->power_info[i].tpc;
+ txpower.power[i].rate = il3945_rates[rate_idx].plcp;
+
+ D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
+ le16_to_cpu(txpower.channel), txpower.band,
+ txpower.power[i].tpc.tx_gain,
+ txpower.power[i].tpc.dsp_atten, txpower.power[i].rate);
+ }
+
+ return il_send_cmd_pdu(il, C_TX_PWR_TBL,
+ sizeof(struct il3945_txpowertable_cmd),
+ &txpower);
+
+}
+
+/**
+ * il3945_hw_reg_set_new_power - Configures power tables at new levels
+ * @ch_info: Channel to update. Uses power_info.requested_power.
+ *
+ * Replace requested_power and base_power_idx ch_info fields for
+ * one channel.
+ *
+ * Called if user or spectrum management changes power preferences.
+ * Takes into account h/w and modulation limitations (clip power).
+ *
+ * This does *not* send anything to NIC, just sets up ch_info for one channel.
+ *
+ * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
+ * properly fill out the scan powers, and actual h/w gain settings,
+ * and send changes to NIC
+ */
+static int
+il3945_hw_reg_set_new_power(struct il_priv *il, struct il_channel_info *ch_info)
+{
+ struct il3945_channel_power_info *power_info;
+ int power_changed = 0;
+ int i;
+ const s8 *clip_pwrs;
+ int power;
+
+ /* Get this chnlgrp's rate-to-max/clip-powers table */
+ clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers;
+
+ /* Get this channel's rate-to-current-power settings table */
+ power_info = ch_info->power_info;
+
+ /* update OFDM Txpower settings */
+ for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++, ++power_info) {
+ int delta_idx;
+
+ /* limit new power to be no more than h/w capability */
+ power = min(ch_info->curr_txpow, clip_pwrs[i]);
+ if (power == power_info->requested_power)
+ continue;
+
+ /* find difference between old and new requested powers,
+ * update base (non-temp-compensated) power idx */
+ delta_idx = (power - power_info->requested_power) * 2;
+ power_info->base_power_idx -= delta_idx;
+
+ /* save new requested power value */
+ power_info->requested_power = power;
+
+ power_changed = 1;
+ }
+
+ /* update CCK Txpower settings, based on OFDM 12M setting ...
+ * ... all CCK power settings for a given channel are the *same*. */
+ if (power_changed) {
+ power =
+ ch_info->power_info[RATE_12M_IDX_TBL].requested_power +
+ IL_CCK_FROM_OFDM_POWER_DIFF;
+
+ /* do all CCK rates' il3945_channel_power_info structures */
+ for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) {
+ power_info->requested_power = power;
+ power_info->base_power_idx =
+ ch_info->power_info[RATE_12M_IDX_TBL].
+ base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
+ ++power_info;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * il3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
+ *
+ * NOTE: Returned power limit may be less (but not more) than requested,
+ * based strictly on regulatory (eeprom and spectrum mgt) limitations
+ * (no consideration for h/w clipping limitations).
+ */
+static int
+il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info *ch_info)
+{
+ s8 max_power;
+
+#if 0
+ /* if we're using TGd limits, use lower of TGd or EEPROM */
+ if (ch_info->tgd_data.max_power != 0)
+ max_power =
+ min(ch_info->tgd_data.max_power,
+ ch_info->eeprom.max_power_avg);
+
+ /* else just use EEPROM limits */
+ else
+#endif
+ max_power = ch_info->eeprom.max_power_avg;
+
+ return min(max_power, ch_info->max_power_avg);
+}
+
+/**
+ * il3945_hw_reg_comp_txpower_temp - Compensate for temperature
+ *
+ * Compensate txpower settings of *all* channels for temperature.
+ * This only accounts for the difference between current temperature
+ * and the factory calibration temperatures, and bases the new settings
+ * on the channel's base_power_idx.
+ *
+ * If RxOn is "associated", this sends the new Txpower to NIC!
+ */
+static int
+il3945_hw_reg_comp_txpower_temp(struct il_priv *il)
+{
+ struct il_channel_info *ch_info = NULL;
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ int delta_idx;
+ const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
+ u8 a_band;
+ u8 rate_idx;
+ u8 scan_tbl_idx;
+ u8 i;
+ int ref_temp;
+ int temperature = il->temperature;
+
+ if (il->disable_tx_power_cal || test_bit(S_SCANNING, &il->status)) {
+ /* do not perform tx power calibration */
+ return 0;
+ }
+ /* set up new Tx power info for each and every channel, 2.4 and 5.x */
+ for (i = 0; i < il->channel_count; i++) {
+ ch_info = &il->channel_info[i];
+ a_band = il_is_channel_a_band(ch_info);
+
+ /* Get this chnlgrp's factory calibration temperature */
+ ref_temp = (s16) eeprom->groups[ch_info->group_idx].temperature;
+
+ /* get power idx adjustment based on current and factory
+ * temps */
+ delta_idx =
+ il3945_hw_reg_adjust_power_by_temp(temperature, ref_temp);
+
+ /* set tx power value for all rates, OFDM and CCK */
+ for (rate_idx = 0; rate_idx < RATE_COUNT_3945; rate_idx++) {
+ int power_idx =
+ ch_info->power_info[rate_idx].base_power_idx;
+
+ /* temperature compensate */
+ power_idx += delta_idx;
+
+ /* stay within table range */
+ power_idx = il3945_hw_reg_fix_power_idx(power_idx);
+ ch_info->power_info[rate_idx].power_table_idx =
+ (u8) power_idx;
+ ch_info->power_info[rate_idx].tpc =
+ power_gain_table[a_band][power_idx];
+ }
+
+ /* Get this chnlgrp's rate-to-max/clip-powers table */
+ clip_pwrs =
+ il->_3945.clip_groups[ch_info->group_idx].clip_powers;
+
+ /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
+ for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES;
+ scan_tbl_idx++) {
+ s32 actual_idx =
+ (scan_tbl_idx ==
+ 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
+ il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
+ actual_idx, clip_pwrs,
+ ch_info, a_band);
+ }
+ }
+
+ /* send Txpower command for current channel to ucode */
+ return il->ops->send_tx_power(il);
+}
+
+int
+il3945_hw_reg_set_txpower(struct il_priv *il, s8 power)
+{
+ struct il_channel_info *ch_info;
+ s8 max_power;
+ u8 a_band;
+ u8 i;
+
+ if (il->tx_power_user_lmt == power) {
+ D_POWER("Requested Tx power same as current " "limit: %ddBm.\n",
+ power);
+ return 0;
+ }
+
+ D_POWER("Setting upper limit clamp to %ddBm.\n", power);
+ il->tx_power_user_lmt = power;
+
+ /* set up new Tx powers for each and every channel, 2.4 and 5.x */
+
+ for (i = 0; i < il->channel_count; i++) {
+ ch_info = &il->channel_info[i];
+ a_band = il_is_channel_a_band(ch_info);
+
+ /* find minimum power of all user and regulatory constraints
+ * (does not consider h/w clipping limitations) */
+ max_power = il3945_hw_reg_get_ch_txpower_limit(ch_info);
+ max_power = min(power, max_power);
+ if (max_power != ch_info->curr_txpow) {
+ ch_info->curr_txpow = max_power;
+
+ /* this considers the h/w clipping limitations */
+ il3945_hw_reg_set_new_power(il, ch_info);
+ }
+ }
+
+ /* update txpower settings for all channels,
+ * send to NIC if associated. */
+ il3945_is_temp_calib_needed(il);
+ il3945_hw_reg_comp_txpower_temp(il);
+
+ return 0;
+}
+
+static int
+il3945_send_rxon_assoc(struct il_priv *il)
+{
+ int rc = 0;
+ struct il_rx_pkt *pkt;
+ struct il3945_rxon_assoc_cmd rxon_assoc;
+ struct il_host_cmd cmd = {
+ .id = C_RXON_ASSOC,
+ .len = sizeof(rxon_assoc),
+ .flags = CMD_WANT_SKB,
+ .data = &rxon_assoc,
+ };
+ const struct il_rxon_cmd *rxon1 = &il->staging;
+ const struct il_rxon_cmd *rxon2 = &il->active;
+
+ if (rxon1->flags == rxon2->flags &&
+ rxon1->filter_flags == rxon2->filter_flags &&
+ rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
+ rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
+ D_INFO("Using current RXON_ASSOC. Not resending.\n");
+ return 0;
+ }
+
+ rxon_assoc.flags = il->staging.flags;
+ rxon_assoc.filter_flags = il->staging.filter_flags;
+ rxon_assoc.ofdm_basic_rates = il->staging.ofdm_basic_rates;
+ rxon_assoc.cck_basic_rates = il->staging.cck_basic_rates;
+ rxon_assoc.reserved = 0;
+
+ rc = il_send_cmd_sync(il, &cmd);
+ if (rc)
+ return rc;
+
+ pkt = (struct il_rx_pkt *)cmd.reply_page;
+ if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
+ IL_ERR("Bad return from C_RXON_ASSOC command\n");
+ rc = -EIO;
+ }
+
+ il_free_pages(il, cmd.reply_page);
+
+ return rc;
+}
+
+/**
+ * il3945_commit_rxon - commit staging_rxon to hardware
+ *
+ * The RXON command in staging_rxon is committed to the hardware and
+ * the active_rxon structure is updated with the new data. This
+ * function correctly transitions out of the RXON_ASSOC_MSK state if
+ * a HW tune is required based on the RXON structure changes.
+ */
+int
+il3945_commit_rxon(struct il_priv *il)
+{
+ /* cast away the const for active_rxon in this function */
+ struct il3945_rxon_cmd *active_rxon = (void *)&il->active;
+ struct il3945_rxon_cmd *staging_rxon = (void *)&il->staging;
+ int rc = 0;
+ bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
+
+ if (test_bit(S_EXIT_PENDING, &il->status))
+ return -EINVAL;
+
+ if (!il_is_alive(il))
+ return -1;
+
+ /* always get timestamp with Rx frame */
+ staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
+
+ /* select antenna */
+ staging_rxon->flags &= ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
+ staging_rxon->flags |= il3945_get_antenna_flags(il);
+
+ rc = il_check_rxon_cmd(il);
+ if (rc) {
+ IL_ERR("Invalid RXON configuration. Not committing.\n");
+ return -EINVAL;
+ }
+
+ /* If we don't need to send a full RXON, we can use
+ * il3945_rxon_assoc_cmd which is used to reconfigure filter
+ * and other flags for the current radio configuration. */
+ if (!il_full_rxon_required(il)) {
+ rc = il_send_rxon_assoc(il);
+ if (rc) {
+ IL_ERR("Error setting RXON_ASSOC "
+ "configuration (%d).\n", rc);
+ return rc;
+ }
+
+ memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
+ /*
+ * We do not commit tx power settings while channel changing,
+ * do it now if tx power changed.
+ */
+ il_set_tx_power(il, il->tx_power_next, false);
+ return 0;
+ }
+
+ /* If we are currently associated and the new config requires
+ * an RXON_ASSOC and the new config wants the associated mask enabled,
+ * we must clear the associated from the active configuration
+ * before we apply the new config */
+ if (il_is_associated(il) && new_assoc) {
+ D_INFO("Toggling associated bit on current RXON\n");
+ active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+
+ /*
+ * reserved4 and 5 could have been filled by the iwlcore code.
+ * Let's clear them before pushing to the 3945.
+ */
+ active_rxon->reserved4 = 0;
+ active_rxon->reserved5 = 0;
+ rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd),
+ &il->active);
+
+ /* If the mask clearing failed then we set
+ * active_rxon back to what it was previously */
+ if (rc) {
+ active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
+ IL_ERR("Error clearing ASSOC_MSK on current "
+ "configuration (%d).\n", rc);
+ return rc;
+ }
+ il_clear_ucode_stations(il);
+ il_restore_stations(il);
+ }
+
+ D_INFO("Sending RXON\n" "* with%s RXON_FILTER_ASSOC_MSK\n"
+ "* channel = %d\n" "* bssid = %pM\n", (new_assoc ? "" : "out"),
+ le16_to_cpu(staging_rxon->channel), staging_rxon->bssid_addr);
+
+ /*
+ * reserved4 and 5 could have been filled by the iwlcore code.
+ * Let's clear them before pushing to the 3945.
+ */
+ staging_rxon->reserved4 = 0;
+ staging_rxon->reserved5 = 0;
+
+ il_set_rxon_hwcrypto(il, !il3945_mod_params.sw_crypto);
+
+ /* Apply the new configuration */
+ rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd),
+ staging_rxon);
+ if (rc) {
+ IL_ERR("Error setting new configuration (%d).\n", rc);
+ return rc;
+ }
+
+ memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
+
+ if (!new_assoc) {
+ il_clear_ucode_stations(il);
+ il_restore_stations(il);
+ }
+
+ /* If we issue a new RXON command which required a tune then we must
+ * send a new TXPOWER command or we won't be able to Tx any frames */
+ rc = il_set_tx_power(il, il->tx_power_next, true);
+ if (rc) {
+ IL_ERR("Error setting Tx power (%d).\n", rc);
+ return rc;
+ }
+
+ /* Init the hardware's rate fallback order based on the band */
+ rc = il3945_init_hw_rate_table(il);
+ if (rc) {
+ IL_ERR("Error setting HW rate table: %02X\n", rc);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * il3945_reg_txpower_periodic - called when time to check our temperature.
+ *
+ * -- reset periodic timer
+ * -- see if temp has changed enough to warrant re-calibration ... if so:
+ * -- correct coeffs for temp (can reset temp timer)
+ * -- save this temp as "last",
+ * -- send new set of gain settings to NIC
+ * NOTE: This should continue working, even when we're not associated,
+ * so we can keep our internal table of scan powers current. */
+void
+il3945_reg_txpower_periodic(struct il_priv *il)
+{
+ /* This will kick in the "brute force"
+ * il3945_hw_reg_comp_txpower_temp() below */
+ if (!il3945_is_temp_calib_needed(il))
+ goto reschedule;
+
+ /* Set up a new set of temp-adjusted TxPowers, send to NIC.
+ * This is based *only* on current temperature,
+ * ignoring any previous power measurements */
+ il3945_hw_reg_comp_txpower_temp(il);
+
+reschedule:
+ queue_delayed_work(il->workqueue, &il->_3945.thermal_periodic,
+ REG_RECALIB_PERIOD * HZ);
+}
+
+static void
+il3945_bg_reg_txpower_periodic(struct work_struct *work)
+{
+ struct il_priv *il = container_of(work, struct il_priv,
+ _3945.thermal_periodic.work);
+
+ mutex_lock(&il->mutex);
+ if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL)
+ goto out;
+
+ il3945_reg_txpower_periodic(il);
+out:
+ mutex_unlock(&il->mutex);
+}
+
+/**
+ * il3945_hw_reg_get_ch_grp_idx - find the channel-group idx (0-4) for channel.
+ *
+ * This function is used when initializing channel-info structs.
+ *
+ * NOTE: These channel groups do *NOT* match the bands above!
+ * These channel groups are based on factory-tested channels;
+ * on A-band, EEPROM's "group frequency" entries represent the top
+ * channel in each group 1-4. Group 5 All B/G channels are in group 0.
+ */
+static u16
+il3945_hw_reg_get_ch_grp_idx(struct il_priv *il,
+ const struct il_channel_info *ch_info)
+{
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ struct il3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
+ u8 group;
+ u16 group_idx = 0; /* based on factory calib frequencies */
+ u8 grp_channel;
+
+ /* Find the group idx for the channel ... don't use idx 1(?) */
+ if (il_is_channel_a_band(ch_info)) {
+ for (group = 1; group < 5; group++) {
+ grp_channel = ch_grp[group].group_channel;
+ if (ch_info->channel <= grp_channel) {
+ group_idx = group;
+ break;
+ }
+ }
+ /* group 4 has a few channels *above* its factory cal freq */
+ if (group == 5)
+ group_idx = 4;
+ } else
+ group_idx = 0; /* 2.4 GHz, group 0 */
+
+ D_POWER("Chnl %d mapped to grp %d\n", ch_info->channel, group_idx);
+ return group_idx;
+}
+
+/**
+ * il3945_hw_reg_get_matched_power_idx - Interpolate to get nominal idx
+ *
+ * Interpolate to get nominal (i.e. at factory calibration temperature) idx
+ * into radio/DSP gain settings table for requested power.
+ */
+static int
+il3945_hw_reg_get_matched_power_idx(struct il_priv *il, s8 requested_power,
+ s32 setting_idx, s32 *new_idx)
+{
+ const struct il3945_eeprom_txpower_group *chnl_grp = NULL;
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ s32 idx0, idx1;
+ s32 power = 2 * requested_power;
+ s32 i;
+ const struct il3945_eeprom_txpower_sample *samples;
+ s32 gains0, gains1;
+ s32 res;
+ s32 denominator;
+
+ chnl_grp = &eeprom->groups[setting_idx];
+ samples = chnl_grp->samples;
+ for (i = 0; i < 5; i++) {
+ if (power == samples[i].power) {
+ *new_idx = samples[i].gain_idx;
+ return 0;
+ }
+ }
+
+ if (power > samples[1].power) {
+ idx0 = 0;
+ idx1 = 1;
+ } else if (power > samples[2].power) {
+ idx0 = 1;
+ idx1 = 2;
+ } else if (power > samples[3].power) {
+ idx0 = 2;
+ idx1 = 3;
+ } else {
+ idx0 = 3;
+ idx1 = 4;
+ }
+
+ denominator = (s32) samples[idx1].power - (s32) samples[idx0].power;
+ if (denominator == 0)
+ return -EINVAL;
+ gains0 = (s32) samples[idx0].gain_idx * (1 << 19);
+ gains1 = (s32) samples[idx1].gain_idx * (1 << 19);
+ res =
+ gains0 + (gains1 - gains0) * ((s32) power -
+ (s32) samples[idx0].power) /
+ denominator + (1 << 18);
+ *new_idx = res >> 19;
+ return 0;
+}
+
+static void
+il3945_hw_reg_init_channel_groups(struct il_priv *il)
+{
+ u32 i;
+ s32 rate_idx;
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ const struct il3945_eeprom_txpower_group *group;
+
+ D_POWER("Initializing factory calib info from EEPROM\n");
+
+ for (i = 0; i < IL_NUM_TX_CALIB_GROUPS; i++) {
+ s8 *clip_pwrs; /* table of power levels for each rate */
+ s8 satur_pwr; /* saturation power for each chnl group */
+ group = &eeprom->groups[i];
+
+ /* sanity check on factory saturation power value */
+ if (group->saturation_power < 40) {
+ IL_WARN("Error: saturation power is %d, "
+ "less than minimum expected 40\n",
+ group->saturation_power);
+ return;
+ }
+
+ /*
+ * Derive requested power levels for each rate, based on
+ * hardware capabilities (saturation power for band).
+ * Basic value is 3dB down from saturation, with further
+ * power reductions for highest 3 data rates. These
+ * backoffs provide headroom for high rate modulation
+ * power peaks, without too much distortion (clipping).
+ */
+ /* we'll fill in this array with h/w max power levels */
+ clip_pwrs = (s8 *) il->_3945.clip_groups[i].clip_powers;
+
+ /* divide factory saturation power by 2 to find -3dB level */
+ satur_pwr = (s8) (group->saturation_power >> 1);
+
+ /* fill in channel group's nominal powers for each rate */
+ for (rate_idx = 0; rate_idx < RATE_COUNT_3945;
+ rate_idx++, clip_pwrs++) {
+ switch (rate_idx) {
+ case RATE_36M_IDX_TBL:
+ if (i == 0) /* B/G */
+ *clip_pwrs = satur_pwr;
+ else /* A */
+ *clip_pwrs = satur_pwr - 5;
+ break;
+ case RATE_48M_IDX_TBL:
+ if (i == 0)
+ *clip_pwrs = satur_pwr - 7;
+ else
+ *clip_pwrs = satur_pwr - 10;
+ break;
+ case RATE_54M_IDX_TBL:
+ if (i == 0)
+ *clip_pwrs = satur_pwr - 9;
+ else
+ *clip_pwrs = satur_pwr - 12;
+ break;
+ default:
+ *clip_pwrs = satur_pwr;
+ break;
+ }
+ }
+ }
+}
+
+/**
+ * il3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
+ *
+ * Second pass (during init) to set up il->channel_info
+ *
+ * Set up Tx-power settings in our channel info database for each VALID
+ * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
+ * and current temperature.
+ *
+ * Since this is based on current temperature (at init time), these values may
+ * not be valid for very long, but it gives us a starting/default point,
+ * and allows us to active (i.e. using Tx) scan.
+ *
+ * This does *not* write values to NIC, just sets up our internal table.
+ */
+int
+il3945_txpower_set_from_eeprom(struct il_priv *il)
+{
+ struct il_channel_info *ch_info = NULL;
+ struct il3945_channel_power_info *pwr_info;
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ int delta_idx;
+ u8 rate_idx;
+ u8 scan_tbl_idx;
+ const s8 *clip_pwrs; /* array of power levels for each rate */
+ u8 gain, dsp_atten;
+ s8 power;
+ u8 pwr_idx, base_pwr_idx, a_band;
+ u8 i;
+ int temperature;
+
+ /* save temperature reference,
+ * so we can determine next time to calibrate */
+ temperature = il3945_hw_reg_txpower_get_temperature(il);
+ il->last_temperature = temperature;
+
+ il3945_hw_reg_init_channel_groups(il);
+
+ /* initialize Tx power info for each and every channel, 2.4 and 5.x */
+ for (i = 0, ch_info = il->channel_info; i < il->channel_count;
+ i++, ch_info++) {
+ a_band = il_is_channel_a_band(ch_info);
+ if (!il_is_channel_valid(ch_info))
+ continue;
+
+ /* find this channel's channel group (*not* "band") idx */
+ ch_info->group_idx = il3945_hw_reg_get_ch_grp_idx(il, ch_info);
+
+ /* Get this chnlgrp's rate->max/clip-powers table */
+ clip_pwrs =
+ il->_3945.clip_groups[ch_info->group_idx].clip_powers;
+
+ /* calculate power idx *adjustment* value according to
+ * diff between current temperature and factory temperature */
+ delta_idx =
+ il3945_hw_reg_adjust_power_by_temp(temperature,
+ eeprom->groups[ch_info->
+ group_idx].
+ temperature);
+
+ D_POWER("Delta idx for channel %d: %d [%d]\n", ch_info->channel,
+ delta_idx, temperature + IL_TEMP_CONVERT);
+
+ /* set tx power value for all OFDM rates */
+ for (rate_idx = 0; rate_idx < IL_OFDM_RATES; rate_idx++) {
+ s32 uninitialized_var(power_idx);
+ int rc;
+
+ /* use channel group's clip-power table,
+ * but don't exceed channel's max power */
+ s8 pwr = min(ch_info->max_power_avg,
+ clip_pwrs[rate_idx]);
+
+ pwr_info = &ch_info->power_info[rate_idx];
+
+ /* get base (i.e. at factory-measured temperature)
+ * power table idx for this rate's power */
+ rc = il3945_hw_reg_get_matched_power_idx(il, pwr,
+ ch_info->
+ group_idx,
+ &power_idx);
+ if (rc) {
+ IL_ERR("Invalid power idx\n");
+ return rc;
+ }
+ pwr_info->base_power_idx = (u8) power_idx;
+
+ /* temperature compensate */
+ power_idx += delta_idx;
+
+ /* stay within range of gain table */
+ power_idx = il3945_hw_reg_fix_power_idx(power_idx);
+
+ /* fill 1 OFDM rate's il3945_channel_power_info struct */
+ pwr_info->requested_power = pwr;
+ pwr_info->power_table_idx = (u8) power_idx;
+ pwr_info->tpc.tx_gain =
+ power_gain_table[a_band][power_idx].tx_gain;
+ pwr_info->tpc.dsp_atten =
+ power_gain_table[a_band][power_idx].dsp_atten;
+ }
+
+ /* set tx power for CCK rates, based on OFDM 12 Mbit settings */
+ pwr_info = &ch_info->power_info[RATE_12M_IDX_TBL];
+ power = pwr_info->requested_power + IL_CCK_FROM_OFDM_POWER_DIFF;
+ pwr_idx = pwr_info->power_table_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
+ base_pwr_idx =
+ pwr_info->base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
+
+ /* stay within table range */
+ pwr_idx = il3945_hw_reg_fix_power_idx(pwr_idx);
+ gain = power_gain_table[a_band][pwr_idx].tx_gain;
+ dsp_atten = power_gain_table[a_band][pwr_idx].dsp_atten;
+
+ /* fill each CCK rate's il3945_channel_power_info structure
+ * NOTE: All CCK-rate Txpwrs are the same for a given chnl!
+ * NOTE: CCK rates start at end of OFDM rates! */
+ for (rate_idx = 0; rate_idx < IL_CCK_RATES; rate_idx++) {
+ pwr_info =
+ &ch_info->power_info[rate_idx + IL_OFDM_RATES];
+ pwr_info->requested_power = power;
+ pwr_info->power_table_idx = pwr_idx;
+ pwr_info->base_power_idx = base_pwr_idx;
+ pwr_info->tpc.tx_gain = gain;
+ pwr_info->tpc.dsp_atten = dsp_atten;
+ }
+
+ /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
+ for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES;
+ scan_tbl_idx++) {
+ s32 actual_idx =
+ (scan_tbl_idx ==
+ 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
+ il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
+ actual_idx, clip_pwrs,
+ ch_info, a_band);
+ }
+ }
+
+ return 0;
+}
+
+int
+il3945_hw_rxq_stop(struct il_priv *il)
+{
+ int ret;
+
+ _il_wr(il, FH39_RCSR_CONFIG(0), 0);
+ ret = _il_poll_bit(il, FH39_RSSR_STATUS,
+ FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
+ FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
+ 1000);
+ if (ret < 0)
+ IL_ERR("Can't stop Rx DMA.\n");
+
+ return 0;
+}
+
+int
+il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq)
+{
+ int txq_id = txq->q.id;
+
+ struct il3945_shared *shared_data = il->_3945.shared_virt;
+
+ shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32) txq->q.dma_addr);
+
+ il_wr(il, FH39_CBCC_CTRL(txq_id), 0);
+ il_wr(il, FH39_CBCC_BASE(txq_id), 0);
+
+ il_wr(il, FH39_TCSR_CONFIG(txq_id),
+ FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
+ FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
+ FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
+ FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
+ FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
+
+ /* fake read to flush all prev. writes */
+ _il_rd(il, FH39_TSSR_CBB_BASE);
+
+ return 0;
+}
+
+/*
+ * HCMD utils
+ */
+static u16
+il3945_get_hcmd_size(u8 cmd_id, u16 len)
+{
+ switch (cmd_id) {
+ case C_RXON:
+ return sizeof(struct il3945_rxon_cmd);
+ case C_POWER_TBL:
+ return sizeof(struct il3945_powertable_cmd);
+ default:
+ return len;
+ }
+}
+
+static u16
+il3945_build_addsta_hcmd(const struct il_addsta_cmd *cmd, u8 * data)
+{
+ struct il3945_addsta_cmd *addsta = (struct il3945_addsta_cmd *)data;
+ addsta->mode = cmd->mode;
+ memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
+ memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo));
+ addsta->station_flags = cmd->station_flags;
+ addsta->station_flags_msk = cmd->station_flags_msk;
+ addsta->tid_disable_tx = cpu_to_le16(0);
+ addsta->rate_n_flags = cmd->rate_n_flags;
+ addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
+ addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
+ addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
+
+ return (u16) sizeof(struct il3945_addsta_cmd);
+}
+
+static int
+il3945_add_bssid_station(struct il_priv *il, const u8 * addr, u8 * sta_id_r)
+{
+ int ret;
+ u8 sta_id;
+ unsigned long flags;
+
+ if (sta_id_r)
+ *sta_id_r = IL_INVALID_STATION;
+
+ ret = il_add_station_common(il, addr, 0, NULL, &sta_id);
+ if (ret) {
+ IL_ERR("Unable to add station %pM\n", addr);
+ return ret;
+ }
+
+ if (sta_id_r)
+ *sta_id_r = sta_id;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ il->stations[sta_id].used |= IL_STA_LOCAL;
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return 0;
+}
+
+static int
+il3945_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif,
+ bool add)
+{
+ struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
+ int ret;
+
+ if (add) {
+ ret =
+ il3945_add_bssid_station(il, vif->bss_conf.bssid,
+ &vif_priv->ibss_bssid_sta_id);
+ if (ret)
+ return ret;
+
+ il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id,
+ (il->band ==
+ IEEE80211_BAND_5GHZ) ? RATE_6M_PLCP :
+ RATE_1M_PLCP);
+ il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id);
+
+ return 0;
+ }
+
+ return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
+ vif->bss_conf.bssid);
+}
+
+/**
+ * il3945_init_hw_rate_table - Initialize the hardware rate fallback table
+ */
+int
+il3945_init_hw_rate_table(struct il_priv *il)
+{
+ int rc, i, idx, prev_idx;
+ struct il3945_rate_scaling_cmd rate_cmd = {
+ .reserved = {0, 0, 0},
+ };
+ struct il3945_rate_scaling_info *table = rate_cmd.table;
+
+ for (i = 0; i < ARRAY_SIZE(il3945_rates); i++) {
+ idx = il3945_rates[i].table_rs_idx;
+
+ table[idx].rate_n_flags = cpu_to_le16(il3945_rates[i].plcp);
+ table[idx].try_cnt = il->retry_rate;
+ prev_idx = il3945_get_prev_ieee_rate(i);
+ table[idx].next_rate_idx = il3945_rates[prev_idx].table_rs_idx;
+ }
+
+ switch (il->band) {
+ case IEEE80211_BAND_5GHZ:
+ D_RATE("Select A mode rate scale\n");
+ /* If one of the following CCK rates is used,
+ * have it fall back to the 6M OFDM rate */
+ for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++)
+ table[i].next_rate_idx =
+ il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
+
+ /* Don't fall back to CCK rates */
+ table[RATE_12M_IDX_TBL].next_rate_idx = RATE_9M_IDX_TBL;
+
+ /* Don't drop out of OFDM rates */
+ table[RATE_6M_IDX_TBL].next_rate_idx =
+ il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
+ break;
+
+ case IEEE80211_BAND_2GHZ:
+ D_RATE("Select B/G mode rate scale\n");
+ /* If an OFDM rate is used, have it fall back to the
+ * 1M CCK rates */
+
+ if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
+ il_is_associated(il)) {
+
+ idx = IL_FIRST_CCK_RATE;
+ for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++)
+ table[i].next_rate_idx =
+ il3945_rates[idx].table_rs_idx;
+
+ idx = RATE_11M_IDX_TBL;
+ /* CCK shouldn't fall back to OFDM... */
+ table[idx].next_rate_idx = RATE_5M_IDX_TBL;
+ }
+ break;
+
+ default:
+ WARN_ON(1);
+ break;
+ }
+
+ /* Update the rate scaling for control frame Tx */
+ rate_cmd.table_id = 0;
+ rc = il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd);
+ if (rc)
+ return rc;
+
+ /* Update the rate scaling for data frame Tx */
+ rate_cmd.table_id = 1;
+ return il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd);
+}
+
+/* Called when initializing driver */
+int
+il3945_hw_set_hw_params(struct il_priv *il)
+{
+ memset((void *)&il->hw_params, 0, sizeof(struct il_hw_params));
+
+ il->_3945.shared_virt =
+ dma_alloc_coherent(&il->pci_dev->dev, sizeof(struct il3945_shared),
+ &il->_3945.shared_phys, GFP_KERNEL);
+ if (!il->_3945.shared_virt)
+ return -ENOMEM;
+
+ il->hw_params.bcast_id = IL3945_BROADCAST_ID;
+
+ /* Assign number of Usable TX queues */
+ il->hw_params.max_txq_num = il->cfg->num_of_queues;
+
+ il->hw_params.tfd_size = sizeof(struct il3945_tfd);
+ il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_3K);
+ il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
+ il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
+ il->hw_params.max_stations = IL3945_STATION_COUNT;
+
+ il->sta_key_max_num = STA_KEY_MAX_NUM;
+
+ il->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
+ il->hw_params.max_beacon_itrvl = IL39_MAX_UCODE_BEACON_INTERVAL;
+ il->hw_params.beacon_time_tsf_bits = IL3945_EXT_BEACON_TIME_POS;
+
+ return 0;
+}
+
+unsigned int
+il3945_hw_get_beacon_cmd(struct il_priv *il, struct il3945_frame *frame,
+ u8 rate)
+{
+ struct il3945_tx_beacon_cmd *tx_beacon_cmd;
+ unsigned int frame_size;
+
+ tx_beacon_cmd = (struct il3945_tx_beacon_cmd *)&frame->u;
+ memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
+
+ tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id;
+ tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+ frame_size =
+ il3945_fill_beacon_frame(il, tx_beacon_cmd->frame,
+ sizeof(frame->u) - sizeof(*tx_beacon_cmd));
+
+ BUG_ON(frame_size > MAX_MPDU_SIZE);
+ tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size);
+
+ tx_beacon_cmd->tx.rate = rate;
+ tx_beacon_cmd->tx.tx_flags =
+ (TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK);
+
+ /* supp_rates[0] == OFDM start at IL_FIRST_OFDM_RATE */
+ tx_beacon_cmd->tx.supp_rates[0] =
+ (IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF;
+
+ tx_beacon_cmd->tx.supp_rates[1] = (IL_CCK_BASIC_RATES_MASK & 0xF);
+
+ return sizeof(struct il3945_tx_beacon_cmd) + frame_size;
+}
+
+void
+il3945_hw_handler_setup(struct il_priv *il)
+{
+ il->handlers[C_TX] = il3945_hdl_tx;
+ il->handlers[N_3945_RX] = il3945_hdl_rx;
+}
+
+void
+il3945_hw_setup_deferred_work(struct il_priv *il)
+{
+ INIT_DELAYED_WORK(&il->_3945.thermal_periodic,
+ il3945_bg_reg_txpower_periodic);
+}
+
+void
+il3945_hw_cancel_deferred_work(struct il_priv *il)
+{
+ cancel_delayed_work(&il->_3945.thermal_periodic);
+}
+
+/* check contents of special bootstrap uCode SRAM */
+static int
+il3945_verify_bsm(struct il_priv *il)
+{
+ __le32 *image = il->ucode_boot.v_addr;
+ u32 len = il->ucode_boot.len;
+ u32 reg;
+ u32 val;
+
+ D_INFO("Begin verify bsm\n");
+
+ /* verify BSM SRAM contents */
+ val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
+ for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len;
+ reg += sizeof(u32), image++) {
+ val = il_rd_prph(il, reg);
+ if (val != le32_to_cpu(*image)) {
+ IL_ERR("BSM uCode verification failed at "
+ "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
+ BSM_SRAM_LOWER_BOUND, reg - BSM_SRAM_LOWER_BOUND,
+ len, val, le32_to_cpu(*image));
+ return -EIO;
+ }
+ }
+
+ D_INFO("BSM bootstrap uCode image OK\n");
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * EEPROM related functions
+ *
+ ******************************************************************************/
+
+/*
+ * Clear the OWNER_MSK, to establish driver (instead of uCode running on
+ * embedded controller) as EEPROM reader; each read is a series of pulses
+ * to/from the EEPROM chip, not a single event, so even reads could conflict
+ * if they weren't arbitrated by some ownership mechanism. Here, the driver
+ * simply claims ownership, which should be safe when this function is called
+ * (i.e. before loading uCode!).
+ */
+static int
+il3945_eeprom_acquire_semaphore(struct il_priv *il)
+{
+ _il_clear_bit(il, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
+ return 0;
+}
+
+static void
+il3945_eeprom_release_semaphore(struct il_priv *il)
+{
+ return;
+}
+
+ /**
+ * il3945_load_bsm - Load bootstrap instructions
+ *
+ * BSM operation:
+ *
+ * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
+ * in special SRAM that does not power down during RFKILL. When powering back
+ * up after power-saving sleeps (or during initial uCode load), the BSM loads
+ * the bootstrap program into the on-board processor, and starts it.
+ *
+ * The bootstrap program loads (via DMA) instructions and data for a new
+ * program from host DRAM locations indicated by the host driver in the
+ * BSM_DRAM_* registers. Once the new program is loaded, it starts
+ * automatically.
+ *
+ * When initializing the NIC, the host driver points the BSM to the
+ * "initialize" uCode image. This uCode sets up some internal data, then
+ * notifies host via "initialize alive" that it is complete.
+ *
+ * The host then replaces the BSM_DRAM_* pointer values to point to the
+ * normal runtime uCode instructions and a backup uCode data cache buffer
+ * (filled initially with starting data values for the on-board processor),
+ * then triggers the "initialize" uCode to load and launch the runtime uCode,
+ * which begins normal operation.
+ *
+ * When doing a power-save shutdown, runtime uCode saves data SRAM into
+ * the backup data cache in DRAM before SRAM is powered down.
+ *
+ * When powering back up, the BSM loads the bootstrap program. This reloads
+ * the runtime uCode instructions and the backup data cache into SRAM,
+ * and re-launches the runtime uCode from where it left off.
+ */
+static int
+il3945_load_bsm(struct il_priv *il)
+{
+ __le32 *image = il->ucode_boot.v_addr;
+ u32 len = il->ucode_boot.len;
+ dma_addr_t pinst;
+ dma_addr_t pdata;
+ u32 inst_len;
+ u32 data_len;
+ int rc;
+ int i;
+ u32 done;
+ u32 reg_offset;
+
+ D_INFO("Begin load bsm\n");
+
+ /* make sure bootstrap program is no larger than BSM's SRAM size */
+ if (len > IL39_MAX_BSM_SIZE)
+ return -EINVAL;
+
+ /* Tell bootstrap uCode where to find the "Initialize" uCode
+ * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
+ * NOTE: il3945_initialize_alive_start() will replace these values,
+ * after the "initialize" uCode has run, to point to
+ * runtime/protocol instructions and backup data cache. */
+ pinst = il->ucode_init.p_addr;
+ pdata = il->ucode_init_data.p_addr;
+ inst_len = il->ucode_init.len;
+ data_len = il->ucode_init_data.len;
+
+ il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
+ il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
+ il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
+ il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
+
+ /* Fill BSM memory with bootstrap instructions */
+ for (reg_offset = BSM_SRAM_LOWER_BOUND;
+ reg_offset < BSM_SRAM_LOWER_BOUND + len;
+ reg_offset += sizeof(u32), image++)
+ _il_wr_prph(il, reg_offset, le32_to_cpu(*image));
+
+ rc = il3945_verify_bsm(il);
+ if (rc)
+ return rc;
+
+ /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
+ il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
+ il_wr_prph(il, BSM_WR_MEM_DST_REG, IL39_RTC_INST_LOWER_BOUND);
+ il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
+
+ /* Load bootstrap code into instruction SRAM now,
+ * to prepare to load "initialize" uCode */
+ il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
+
+ /* Wait for load of bootstrap uCode to finish */
+ for (i = 0; i < 100; i++) {
+ done = il_rd_prph(il, BSM_WR_CTRL_REG);
+ if (!(done & BSM_WR_CTRL_REG_BIT_START))
+ break;
+ udelay(10);
+ }
+ if (i < 100)
+ D_INFO("BSM write complete, poll %d iterations\n", i);
+ else {
+ IL_ERR("BSM write did not complete!\n");
+ return -EIO;
+ }
+
+ /* Enable future boot loads whenever power management unit triggers it
+ * (e.g. when powering back up after power-save shutdown) */
+ il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
+
+ return 0;
+}
+
+const struct il_ops il3945_ops = {
+ .txq_attach_buf_to_tfd = il3945_hw_txq_attach_buf_to_tfd,
+ .txq_free_tfd = il3945_hw_txq_free_tfd,
+ .txq_init = il3945_hw_tx_queue_init,
+ .load_ucode = il3945_load_bsm,
+ .dump_nic_error_log = il3945_dump_nic_error_log,
+ .apm_init = il3945_apm_init,
+ .send_tx_power = il3945_send_tx_power,
+ .is_valid_rtc_data_addr = il3945_hw_valid_rtc_data_addr,
+ .eeprom_acquire_semaphore = il3945_eeprom_acquire_semaphore,
+ .eeprom_release_semaphore = il3945_eeprom_release_semaphore,
+
+ .rxon_assoc = il3945_send_rxon_assoc,
+ .commit_rxon = il3945_commit_rxon,
+
+ .get_hcmd_size = il3945_get_hcmd_size,
+ .build_addsta_hcmd = il3945_build_addsta_hcmd,
+ .request_scan = il3945_request_scan,
+ .post_scan = il3945_post_scan,
+
+ .post_associate = il3945_post_associate,
+ .config_ap = il3945_config_ap,
+ .manage_ibss_station = il3945_manage_ibss_station,
+
+ .send_led_cmd = il3945_send_led_cmd,
+};
+
+static struct il_cfg il3945_bg_cfg = {
+ .name = "3945BG",
+ .fw_name_pre = IL3945_FW_PRE,
+ .ucode_api_max = IL3945_UCODE_API_MAX,
+ .ucode_api_min = IL3945_UCODE_API_MIN,
+ .sku = IL_SKU_G,
+ .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
+ .mod_params = &il3945_mod_params,
+ .led_mode = IL_LED_BLINK,
+
+ .eeprom_size = IL3945_EEPROM_IMG_SIZE,
+ .num_of_queues = IL39_NUM_QUEUES,
+ .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
+ .set_l0s = false,
+ .use_bsm = true,
+ .led_compensation = 64,
+ .wd_timeout = IL_DEF_WD_TIMEOUT,
+
+ .regulatory_bands = {
+ EEPROM_REGULATORY_BAND_1_CHANNELS,
+ EEPROM_REGULATORY_BAND_2_CHANNELS,
+ EEPROM_REGULATORY_BAND_3_CHANNELS,
+ EEPROM_REGULATORY_BAND_4_CHANNELS,
+ EEPROM_REGULATORY_BAND_5_CHANNELS,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ },
+};
+
+static struct il_cfg il3945_abg_cfg = {
+ .name = "3945ABG",
+ .fw_name_pre = IL3945_FW_PRE,
+ .ucode_api_max = IL3945_UCODE_API_MAX,
+ .ucode_api_min = IL3945_UCODE_API_MIN,
+ .sku = IL_SKU_A | IL_SKU_G,
+ .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
+ .mod_params = &il3945_mod_params,
+ .led_mode = IL_LED_BLINK,
+
+ .eeprom_size = IL3945_EEPROM_IMG_SIZE,
+ .num_of_queues = IL39_NUM_QUEUES,
+ .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
+ .set_l0s = false,
+ .use_bsm = true,
+ .led_compensation = 64,
+ .wd_timeout = IL_DEF_WD_TIMEOUT,
+
+ .regulatory_bands = {
+ EEPROM_REGULATORY_BAND_1_CHANNELS,
+ EEPROM_REGULATORY_BAND_2_CHANNELS,
+ EEPROM_REGULATORY_BAND_3_CHANNELS,
+ EEPROM_REGULATORY_BAND_4_CHANNELS,
+ EEPROM_REGULATORY_BAND_5_CHANNELS,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ },
+};
+
+const struct pci_device_id il3945_hw_card_ids[] = {
+ {IL_PCI_DEVICE(0x4222, 0x1005, il3945_bg_cfg)},
+ {IL_PCI_DEVICE(0x4222, 0x1034, il3945_bg_cfg)},
+ {IL_PCI_DEVICE(0x4222, 0x1044, il3945_bg_cfg)},
+ {IL_PCI_DEVICE(0x4227, 0x1014, il3945_bg_cfg)},
+ {IL_PCI_DEVICE(0x4222, PCI_ANY_ID, il3945_abg_cfg)},
+ {IL_PCI_DEVICE(0x4227, PCI_ANY_ID, il3945_abg_cfg)},
+ {0}
+};
+
+MODULE_DEVICE_TABLE(pci, il3945_hw_card_ids);