diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/prph.h')
| -rw-r--r-- | drivers/net/wireless/iwlegacy/prph.h | 522 |
1 files changed, 522 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlegacy/prph.h b/drivers/net/wireless/iwlegacy/prph.h new file mode 100644 index 000000000..ffec4b4a2 --- /dev/null +++ b/drivers/net/wireless/iwlegacy/prph.h @@ -0,0 +1,522 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#ifndef __il_prph_h__ +#define __il_prph_h__ + +/* + * Registers in this file are internal, not PCI bus memory mapped. + * Driver accesses these via HBUS_TARG_PRPH_* registers. + */ +#define PRPH_BASE (0x00000) +#define PRPH_END (0xFFFFF) + +/* APMG (power management) constants */ +#define APMG_BASE (PRPH_BASE + 0x3000) +#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000) +#define APMG_CLK_EN_REG (APMG_BASE + 0x0004) +#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008) +#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c) +#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010) +#define APMG_RFKILL_REG (APMG_BASE + 0x0014) +#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c) +#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020) +#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058) +#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C) + +#define APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001) +#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200) +#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800) + +#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000) +#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) +#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) +#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) +#define APMG_PS_CTRL_VAL_PWR_SRC_MAX (0x01000000) /* 3945 only */ +#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000) +#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */ +#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060) + +#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) + +/** + * BSM (Bootstrap State Machine) + * + * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program + * in special SRAM that does not power down when the embedded control + * processor is sleeping (e.g. for periodic power-saving shutdowns of radio). + * + * When powering back up after sleeps (or during initial uCode load), the BSM + * internally loads the short bootstrap program from the special SRAM into the + * embedded processor's instruction SRAM, and starts the processor so it runs + * the bootstrap program. + * + * This bootstrap program loads (via PCI busmaster DMA) instructions and data + * images for a uCode program from host DRAM locations. The host driver + * indicates DRAM locations and sizes for instruction and data images via the + * four BSM_DRAM_* registers. Once the bootstrap program loads the new program, + * the new program starts automatically. + * + * The uCode used for open-source drivers includes two programs: + * + * 1) Initialization -- performs hardware calibration and sets up some + * internal data, then notifies host via "initialize alive" notification + * (struct il_init_alive_resp) that it has completed all of its work. + * After signal from host, it then loads and starts the runtime program. + * The initialization program must be used when initially setting up the + * NIC after loading the driver. + * + * 2) Runtime/Protocol -- performs all normal runtime operations. This + * notifies host via "alive" notification (struct il_alive_resp) that it + * is ready to be used. + * + * When initializing the NIC, the host driver does the following procedure: + * + * 1) Load bootstrap program (instructions only, no data image for bootstrap) + * into bootstrap memory. Use dword writes starting at BSM_SRAM_LOWER_BOUND + * + * 2) Point (via BSM_DRAM_*) to the "initialize" uCode data and instruction + * images in host DRAM. + * + * 3) Set up BSM to copy from BSM SRAM into uCode instruction SRAM when asked: + * BSM_WR_MEM_SRC_REG = 0 + * BSM_WR_MEM_DST_REG = RTC_INST_LOWER_BOUND + * BSM_WR_MEM_DWCOUNT_REG = # dwords in bootstrap instruction image + * + * 4) Load bootstrap into instruction SRAM: + * BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START + * + * 5) Wait for load completion: + * Poll BSM_WR_CTRL_REG for BSM_WR_CTRL_REG_BIT_START = 0 + * + * 6) Enable future boot loads whenever NIC's power management triggers it: + * BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START_EN + * + * 7) Start the NIC by removing all reset bits: + * CSR_RESET = 0 + * + * The bootstrap uCode (already in instruction SRAM) loads initialization + * uCode. Initialization uCode performs data initialization, sends + * "initialize alive" notification to host, and waits for a signal from + * host to load runtime code. + * + * 4) Point (via BSM_DRAM_*) to the "runtime" uCode data and instruction + * images in host DRAM. The last register loaded must be the instruction + * byte count register ("1" in MSbit tells initialization uCode to load + * the runtime uCode): + * BSM_DRAM_INST_BYTECOUNT_REG = byte count | BSM_DRAM_INST_LOAD + * + * 5) Wait for "alive" notification, then issue normal runtime commands. + * + * Data caching during power-downs: + * + * Just before the embedded controller powers down (e.g for automatic + * power-saving modes, or for RFKILL), uCode stores (via PCI busmaster DMA) + * a current snapshot of the embedded processor's data SRAM into host DRAM. + * This caches the data while the embedded processor's memory is powered down. + * Location and size are controlled by BSM_DRAM_DATA_* registers. + * + * NOTE: Instruction SRAM does not need to be saved, since that doesn't + * change during operation; the original image (from uCode distribution + * file) can be used for reload. + * + * When powering back up, the BSM loads the bootstrap program. Bootstrap looks + * at the BSM_DRAM_* registers, which now point to the runtime instruction + * image and the cached (modified) runtime data (*not* the initialization + * uCode). Bootstrap reloads these runtime images into SRAM, and restarts the + * uCode from where it left off before the power-down. + * + * NOTE: Initialization uCode does *not* run as part of the save/restore + * procedure. + * + * This save/restore method is mostly for autonomous power management during + * normal operation (result of C_POWER_TBL). Platform suspend/resume and + * RFKILL should use complete restarts (with total re-initialization) of uCode, + * allowing total shutdown (including BSM memory). + * + * Note that, during normal operation, the host DRAM that held the initial + * startup data for the runtime code is now being used as a backup data cache + * for modified data! If you need to completely re-initialize the NIC, make + * sure that you use the runtime data image from the uCode distribution file, + * not the modified/saved runtime data. You may want to store a separate + * "clean" runtime data image in DRAM to avoid disk reads of distribution file. + */ + +/* BSM bit fields */ +#define BSM_WR_CTRL_REG_BIT_START (0x80000000) /* start boot load now */ +#define BSM_WR_CTRL_REG_BIT_START_EN (0x40000000) /* enable boot after pwrup */ +#define BSM_DRAM_INST_LOAD (0x80000000) /* start program load now */ + +/* BSM addresses */ +#define BSM_BASE (PRPH_BASE + 0x3400) +#define BSM_END (PRPH_BASE + 0x3800) + +#define BSM_WR_CTRL_REG (BSM_BASE + 0x000) /* ctl and status */ +#define BSM_WR_MEM_SRC_REG (BSM_BASE + 0x004) /* source in BSM mem */ +#define BSM_WR_MEM_DST_REG (BSM_BASE + 0x008) /* dest in SRAM mem */ +#define BSM_WR_DWCOUNT_REG (BSM_BASE + 0x00C) /* bytes */ +#define BSM_WR_STATUS_REG (BSM_BASE + 0x010) /* bit 0: 1 == done */ + +/* + * Pointers and size regs for bootstrap load and data SRAM save/restore. + * NOTE: 3945 pointers use bits 31:0 of DRAM address. + * 4965 pointers use bits 35:4 of DRAM address. + */ +#define BSM_DRAM_INST_PTR_REG (BSM_BASE + 0x090) +#define BSM_DRAM_INST_BYTECOUNT_REG (BSM_BASE + 0x094) +#define BSM_DRAM_DATA_PTR_REG (BSM_BASE + 0x098) +#define BSM_DRAM_DATA_BYTECOUNT_REG (BSM_BASE + 0x09C) + +/* + * BSM special memory, stays powered on during power-save sleeps. + * Read/write, address range from LOWER_BOUND to (LOWER_BOUND + SIZE -1) + */ +#define BSM_SRAM_LOWER_BOUND (PRPH_BASE + 0x3800) +#define BSM_SRAM_SIZE (1024) /* bytes */ + +/* 3945 Tx scheduler registers */ +#define ALM_SCD_BASE (PRPH_BASE + 0x2E00) +#define ALM_SCD_MODE_REG (ALM_SCD_BASE + 0x000) +#define ALM_SCD_ARASTAT_REG (ALM_SCD_BASE + 0x004) +#define ALM_SCD_TXFACT_REG (ALM_SCD_BASE + 0x010) +#define ALM_SCD_TXF4MF_REG (ALM_SCD_BASE + 0x014) +#define ALM_SCD_TXF5MF_REG (ALM_SCD_BASE + 0x020) +#define ALM_SCD_SBYP_MODE_1_REG (ALM_SCD_BASE + 0x02C) +#define ALM_SCD_SBYP_MODE_2_REG (ALM_SCD_BASE + 0x030) + +/** + * Tx Scheduler + * + * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs + * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in + * host DRAM. It steers each frame's Tx command (which contains the frame + * data) into one of up to 7 prioritized Tx DMA FIFO channels within the + * device. A queue maps to only one (selectable by driver) Tx DMA channel, + * but one DMA channel may take input from several queues. + * + * Tx DMA FIFOs have dedicated purposes. For 4965, they are used as follows + * (cf. default_queue_to_tx_fifo in 4965.c): + * + * 0 -- EDCA BK (background) frames, lowest priority + * 1 -- EDCA BE (best effort) frames, normal priority + * 2 -- EDCA VI (video) frames, higher priority + * 3 -- EDCA VO (voice) and management frames, highest priority + * 4 -- Commands (e.g. RXON, etc.) + * 5 -- unused (HCCA) + * 6 -- unused (HCCA) + * 7 -- not used by driver (device-internal only) + * + * + * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. + * In addition, driver can map the remaining queues to Tx DMA/FIFO + * channels 0-3 to support 11n aggregation via EDCA DMA channels. + * + * The driver sets up each queue to work in one of two modes: + * + * 1) Scheduler-Ack, in which the scheduler automatically supports a + * block-ack (BA) win of up to 64 TFDs. In this mode, each queue + * contains TFDs for a unique combination of Recipient Address (RA) + * and Traffic Identifier (TID), that is, traffic of a given + * Quality-Of-Service (QOS) priority, destined for a single station. + * + * In scheduler-ack mode, the scheduler keeps track of the Tx status of + * each frame within the BA win, including whether it's been transmitted, + * and whether it's been acknowledged by the receiving station. The device + * automatically processes block-acks received from the receiving STA, + * and reschedules un-acked frames to be retransmitted (successful + * Tx completion may end up being out-of-order). + * + * The driver must maintain the queue's Byte Count table in host DRAM + * (struct il4965_sched_queue_byte_cnt_tbl) for this mode. + * This mode does not support fragmentation. + * + * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. + * The device may automatically retry Tx, but will retry only one frame + * at a time, until receiving ACK from receiving station, or reaching + * retry limit and giving up. + * + * The command queue (#4/#9) must use this mode! + * This mode does not require use of the Byte Count table in host DRAM. + * + * Driver controls scheduler operation via 3 means: + * 1) Scheduler registers + * 2) Shared scheduler data base in internal 4956 SRAM + * 3) Shared data in host DRAM + * + * Initialization: + * + * When loading, driver should allocate memory for: + * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. + * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory + * (1024 bytes for each queue). + * + * After receiving "Alive" response from uCode, driver must initialize + * the scheduler (especially for queue #4/#9, the command queue, otherwise + * the driver can't issue commands!): + */ + +/** + * Max Tx win size is the max number of contiguous TFDs that the scheduler + * can keep track of at one time when creating block-ack chains of frames. + * Note that "64" matches the number of ack bits in a block-ack packet. + * Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize + * IL49_SCD_CONTEXT_QUEUE_OFFSET(x) values. + */ +#define SCD_WIN_SIZE 64 +#define SCD_FRAME_LIMIT 64 + +/* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */ +#define IL49_SCD_START_OFFSET 0xa02c00 + +/* + * 4965 tells driver SRAM address for internal scheduler structs via this reg. + * Value is valid only after "Alive" response from uCode. + */ +#define IL49_SCD_SRAM_BASE_ADDR (IL49_SCD_START_OFFSET + 0x0) + +/* + * Driver may need to update queue-empty bits after changing queue's + * write and read pointers (idxes) during (re-)initialization (i.e. when + * scheduler is not tracking what's happening). + * Bit fields: + * 31-16: Write mask -- 1: update empty bit, 0: don't change empty bit + * 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty + * NOTE: This register is not used by Linux driver. + */ +#define IL49_SCD_EMPTY_BITS (IL49_SCD_START_OFFSET + 0x4) + +/* + * Physical base address of array of byte count (BC) circular buffers (CBs). + * Each Tx queue has a BC CB in host DRAM to support Scheduler-ACK mode. + * This register points to BC CB for queue 0, must be on 1024-byte boundary. + * Others are spaced by 1024 bytes. + * Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad. + * (Index into a queue's BC CB) = (idx into queue's TFD CB) = (SSN & 0xff). + * Bit fields: + * 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned. + */ +#define IL49_SCD_DRAM_BASE_ADDR (IL49_SCD_START_OFFSET + 0x10) + +/* + * Enables any/all Tx DMA/FIFO channels. + * Scheduler generates requests for only the active channels. + * Set this to 0xff to enable all 8 channels (normal usage). + * Bit fields: + * 7- 0: Enable (1), disable (0), one bit for each channel 0-7 + */ +#define IL49_SCD_TXFACT (IL49_SCD_START_OFFSET + 0x1c) +/* + * Queue (x) Write Pointers (idxes, really!), one for each Tx queue. + * Initialized and updated by driver as new TFDs are added to queue. + * NOTE: If using Block Ack, idx must correspond to frame's + * Start Sequence Number; idx = (SSN & 0xff) + * NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses? + */ +#define IL49_SCD_QUEUE_WRPTR(x) (IL49_SCD_START_OFFSET + 0x24 + (x) * 4) + +/* + * Queue (x) Read Pointers (idxes, really!), one for each Tx queue. + * For FIFO mode, idx indicates next frame to transmit. + * For Scheduler-ACK mode, idx indicates first frame in Tx win. + * Initialized by driver, updated by scheduler. + */ +#define IL49_SCD_QUEUE_RDPTR(x) (IL49_SCD_START_OFFSET + 0x64 + (x) * 4) + +/* + * Select which queues work in chain mode (1) vs. not (0). + * Use chain mode to build chains of aggregated frames. + * Bit fields: + * 31-16: Reserved + * 15-00: Mode, one bit for each queue -- 1: Chain mode, 0: one-at-a-time + * NOTE: If driver sets up queue for chain mode, it should be also set up + * Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x). + */ +#define IL49_SCD_QUEUECHAIN_SEL (IL49_SCD_START_OFFSET + 0xd0) + +/* + * Select which queues interrupt driver when scheduler increments + * a queue's read pointer (idx). + * Bit fields: + * 31-16: Reserved + * 15-00: Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled + * NOTE: This functionality is apparently a no-op; driver relies on interrupts + * from Rx queue to read Tx command responses and update Tx queues. + */ +#define IL49_SCD_INTERRUPT_MASK (IL49_SCD_START_OFFSET + 0xe4) + +/* + * Queue search status registers. One for each queue. + * Sets up queue mode and assigns queue to Tx DMA channel. + * Bit fields: + * 19-10: Write mask/enable bits for bits 0-9 + * 9: Driver should init to "0" + * 8: Scheduler-ACK mode (1), non-Scheduler-ACK (i.e. FIFO) mode (0). + * Driver should init to "1" for aggregation mode, or "0" otherwise. + * 7-6: Driver should init to "0" + * 5: Window Size Left; indicates whether scheduler can request + * another TFD, based on win size, etc. Driver should init + * this bit to "1" for aggregation mode, or "0" for non-agg. + * 4-1: Tx FIFO to use (range 0-7). + * 0: Queue is active (1), not active (0). + * Other bits should be written as "0" + * + * NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled + * via SCD_QUEUECHAIN_SEL. + */ +#define IL49_SCD_QUEUE_STATUS_BITS(x)\ + (IL49_SCD_START_OFFSET + 0x104 + (x) * 4) + +/* Bit field positions */ +#define IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE (0) +#define IL49_SCD_QUEUE_STTS_REG_POS_TXF (1) +#define IL49_SCD_QUEUE_STTS_REG_POS_WSL (5) +#define IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK (8) + +/* Write masks */ +#define IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10) +#define IL49_SCD_QUEUE_STTS_REG_MSK (0x0007FC00) + +/** + * 4965 internal SRAM structures for scheduler, shared with driver ... + * + * Driver should clear and initialize the following areas after receiving + * "Alive" response from 4965 uCode, i.e. after initial + * uCode load, or after a uCode load done for error recovery: + * + * SCD_CONTEXT_DATA_OFFSET (size 128 bytes) + * SCD_TX_STTS_BITMAP_OFFSET (size 256 bytes) + * SCD_TRANSLATE_TBL_OFFSET (size 32 bytes) + * + * Driver accesses SRAM via HBUS_TARG_MEM_* registers. + * Driver reads base address of this scheduler area from SCD_SRAM_BASE_ADDR. + * All OFFSET values must be added to this base address. + */ + +/* + * Queue context. One 8-byte entry for each of 16 queues. + * + * Driver should clear this entire area (size 0x80) to 0 after receiving + * "Alive" notification from uCode. Additionally, driver should init + * each queue's entry as follows: + * + * LS Dword bit fields: + * 0-06: Max Tx win size for Scheduler-ACK. Driver should init to 64. + * + * MS Dword bit fields: + * 16-22: Frame limit. Driver should init to 10 (0xa). + * + * Driver should init all other bits to 0. + * + * Init must be done after driver receives "Alive" response from 4965 uCode, + * and when setting up queue for aggregation. + */ +#define IL49_SCD_CONTEXT_DATA_OFFSET 0x380 +#define IL49_SCD_CONTEXT_QUEUE_OFFSET(x) \ + (IL49_SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) + +#define IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0) +#define IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F) +#define IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) +#define IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) + +/* + * Tx Status Bitmap + * + * Driver should clear this entire area (size 0x100) to 0 after receiving + * "Alive" notification from uCode. Area is used only by device itself; + * no other support (besides clearing) is required from driver. + */ +#define IL49_SCD_TX_STTS_BITMAP_OFFSET 0x400 + +/* + * RAxTID to queue translation mapping. + * + * When queue is in Scheduler-ACK mode, frames placed in a that queue must be + * for only one combination of receiver address (RA) and traffic ID (TID), i.e. + * one QOS priority level destined for one station (for this wireless link, + * not final destination). The SCD_TRANSLATE_TBL area provides 16 16-bit + * mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK + * mode, the device ignores the mapping value. + * + * Bit fields, for each 16-bit map: + * 15-9: Reserved, set to 0 + * 8-4: Index into device's station table for recipient station + * 3-0: Traffic ID (tid), range 0-15 + * + * Driver should clear this entire area (size 32 bytes) to 0 after receiving + * "Alive" notification from uCode. To update a 16-bit map value, driver + * must read a dword-aligned value from device SRAM, replace the 16-bit map + * value of interest, and write the dword value back into device SRAM. + */ +#define IL49_SCD_TRANSLATE_TBL_OFFSET 0x500 + +/* Find translation table dword to read/write for given queue */ +#define IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ + ((IL49_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc) + +#define IL_SCD_TXFIFO_POS_TID (0) +#define IL_SCD_TXFIFO_POS_RA (4) +#define IL_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) + +/*********************** END TX SCHEDULER *************************************/ + +#endif /* __il_prph_h__ */ |