diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/Kconfig')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/Kconfig | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig new file mode 100644 index 000000000..f89f446e5 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -0,0 +1,158 @@ +config IWLWIFI + tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi) " + depends on PCI && MAC80211 && HAS_IOMEM + select FW_LOADER + ---help--- + Select to build the driver supporting the: + + Intel Wireless WiFi Link Next-Gen AGN + + This option enables support for use with the following hardware: + Intel Wireless WiFi Link 6250AGN Adapter + Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN) + Intel WiFi Link 1000BGN + Intel Wireless WiFi 5150AGN + Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN + Intel 6005 Series Wi-Fi Adapters + Intel 6030 Series Wi-Fi Adapters + Intel Wireless WiFi Link 6150BGN 2 Adapter + Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN) + Intel 2000 Series Wi-Fi Adapters + Intel 7260 Wi-Fi Adapter + Intel 3160 Wi-Fi Adapter + Intel 7265 Wi-Fi Adapter + Intel 3165 Wi-Fi Adapter + + + This driver uses the kernel's mac80211 subsystem. + + In order to use this driver, you will need a firmware + image for it. You can obtain the microcode from: + + <http://wireless.kernel.org/en/users/Drivers/iwlwifi>. + + The firmware is typically installed in /lib/firmware. You can + look in the hotplug script /etc/hotplug/firmware.agent to + determine which directory FIRMWARE_DIR is set to when the script + runs. + + If you want to compile the driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/kbuild/modules.txt>. The + module will be called iwlwifi. + +if IWLWIFI + +config IWLWIFI_LEDS + bool + depends on LEDS_CLASS=y || LEDS_CLASS=IWLWIFI + select LEDS_TRIGGERS + select MAC80211_LEDS + default y + +config IWLDVM + tristate "Intel Wireless WiFi DVM Firmware support" + default IWLWIFI + help + This is the driver that supports the DVM firmware which is + used by most existing devices (with the exception of 7260 + and 3160). + +config IWLMVM + tristate "Intel Wireless WiFi MVM Firmware support" + select WANT_DEV_COREDUMP + help + This is the driver that supports the MVM firmware which is + currently only available for 7260 and 3160 devices. + +# don't call it _MODULE -- will confuse Kconfig/fixdep/... +config IWLWIFI_OPMODE_MODULAR + bool + default y if IWLDVM=m + default y if IWLMVM=m + +comment "WARNING: iwlwifi is useless without IWLDVM or IWLMVM" + depends on IWLDVM=n && IWLMVM=n + +config IWLWIFI_BCAST_FILTERING + bool "Enable broadcast filtering" + depends on IWLMVM + help + Say Y here to enable default bcast filtering configuration. + + Enabling broadcast filtering will drop any incoming wireless + broadcast frames, except some very specific predefined + patterns (e.g. incoming arp requests). + + If unsure, don't enable this option, as some programs might + expect incoming broadcasts for their normal operations. + +config IWLWIFI_UAPSD + bool "enable U-APSD by default" + depends on IWLMVM + help + Say Y here to enable U-APSD by default. This may cause + interoperability problems with some APs, manifesting in lower than + expected throughput due to those APs not enabling aggregation + + If unsure, say N. + +menu "Debugging Options" + +config IWLWIFI_DEBUG + bool "Enable full debugging output in the iwlwifi driver" + ---help--- + This option will enable debug tracing output for the iwlwifi drivers + + This will result in the kernel module being ~100k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/module/iwlwifi/parameters/debug + + This entry will only exist if this option is enabled. + + To set a value, simply echo an 8-byte hex value to the same file: + + % echo 0x43fff > /sys/module/iwlwifi/parameters/debug + + You can find the list of debug mask values in: + drivers/net/wireless/iwlwifi/iwl-debug.h + + If this is your first time using this driver, you should say Y here + as the debug information can assist others in helping you resolve + any problems you may encounter. + +config IWLWIFI_DEBUGFS + bool "iwlwifi debugfs support" + depends on MAC80211_DEBUGFS + ---help--- + Enable creation of debugfs files for the iwlwifi drivers. This + is a low-impact option that allows getting insight into the + driver's state at runtime. + +config IWLWIFI_DEBUG_EXPERIMENTAL_UCODE + bool "Experimental uCode support" + depends on IWLWIFI_DEBUG + ---help--- + Enable use of experimental ucode for testing and debugging. + +config IWLWIFI_DEVICE_TRACING + bool "iwlwifi device access tracing" + depends on EVENT_TRACING + help + Say Y here to trace all commands, including TX frames and IO + accesses, sent to the device. If you say yes, iwlwifi will + register with the ftrace framework for event tracing and dump + all this information to the ringbuffer, you may need to + increase the ringbuffer size. See the ftrace documentation + for more information. + + When tracing is not enabled, this option still has some + (though rather small) overhead. + + If unsure, say Y so we can help you better when problems + occur. +endmenu + +endif |