diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/dvm/scan.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/dvm/scan.c | 1075 |
1 files changed, 0 insertions, 1075 deletions
diff --git a/drivers/net/wireless/iwlwifi/dvm/scan.c b/drivers/net/wireless/iwlwifi/dvm/scan.c deleted file mode 100644 index 648159495..000000000 --- a/drivers/net/wireless/iwlwifi/dvm/scan.c +++ /dev/null @@ -1,1075 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/etherdevice.h> -#include <net/mac80211.h> - -#include "dev.h" -#include "agn.h" - -/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after - * sending probe req. This should be set long enough to hear probe responses - * from more than one AP. */ -#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */ -#define IWL_ACTIVE_DWELL_TIME_52 (20) - -#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3) -#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2) - -/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. - * Must be set longer than active dwell time. - * For the most reliable scan, set > AP beacon interval (typically 100msec). */ -#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */ -#define IWL_PASSIVE_DWELL_TIME_52 (10) -#define IWL_PASSIVE_DWELL_BASE (100) -#define IWL_CHANNEL_TUNE_TIME 5 -#define MAX_SCAN_CHANNEL 50 - -/* For reset radio, need minimal dwell time only */ -#define IWL_RADIO_RESET_DWELL_TIME 5 - -static int iwl_send_scan_abort(struct iwl_priv *priv) -{ - int ret; - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_ABORT_CMD, - .flags = CMD_WANT_SKB, - }; - __le32 *status; - - /* Exit instantly with error when device is not ready - * to receive scan abort command or it does not perform - * hardware scan currently */ - if (!test_bit(STATUS_READY, &priv->status) || - !test_bit(STATUS_SCAN_HW, &priv->status) || - test_bit(STATUS_FW_ERROR, &priv->status)) - return -EIO; - - ret = iwl_dvm_send_cmd(priv, &cmd); - if (ret) - return ret; - - status = (void *)cmd.resp_pkt->data; - if (*status != CAN_ABORT_STATUS) { - /* The scan abort will return 1 for success or - * 2 for "failure". A failure condition can be - * due to simply not being in an active scan which - * can occur if we send the scan abort before we - * the microcode has notified us that a scan is - * completed. */ - IWL_DEBUG_SCAN(priv, "SCAN_ABORT ret %d.\n", - le32_to_cpu(*status)); - ret = -EIO; - } - - iwl_free_resp(&cmd); - return ret; -} - -static void iwl_complete_scan(struct iwl_priv *priv, bool aborted) -{ - /* check if scan was requested from mac80211 */ - if (priv->scan_request) { - IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n"); - ieee80211_scan_completed(priv->hw, aborted); - } - - priv->scan_type = IWL_SCAN_NORMAL; - priv->scan_vif = NULL; - priv->scan_request = NULL; -} - -static void iwl_process_scan_complete(struct iwl_priv *priv) -{ - bool aborted; - - lockdep_assert_held(&priv->mutex); - - if (!test_and_clear_bit(STATUS_SCAN_COMPLETE, &priv->status)) - return; - - IWL_DEBUG_SCAN(priv, "Completed scan.\n"); - - cancel_delayed_work(&priv->scan_check); - - aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status); - if (aborted) - IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n"); - - if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan already completed.\n"); - goto out_settings; - } - - if (priv->scan_type != IWL_SCAN_NORMAL && !aborted) { - int err; - - /* Check if mac80211 requested scan during our internal scan */ - if (priv->scan_request == NULL) - goto out_complete; - - /* If so request a new scan */ - err = iwl_scan_initiate(priv, priv->scan_vif, IWL_SCAN_NORMAL, - priv->scan_request->channels[0]->band); - if (err) { - IWL_DEBUG_SCAN(priv, - "failed to initiate pending scan: %d\n", err); - aborted = true; - goto out_complete; - } - - return; - } - -out_complete: - iwl_complete_scan(priv, aborted); - -out_settings: - /* Can we still talk to firmware ? */ - if (!iwl_is_ready_rf(priv)) - return; - - iwlagn_post_scan(priv); -} - -void iwl_force_scan_end(struct iwl_priv *priv) -{ - lockdep_assert_held(&priv->mutex); - - if (!test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n"); - return; - } - - IWL_DEBUG_SCAN(priv, "Forcing scan end\n"); - clear_bit(STATUS_SCANNING, &priv->status); - clear_bit(STATUS_SCAN_HW, &priv->status); - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - clear_bit(STATUS_SCAN_COMPLETE, &priv->status); - iwl_complete_scan(priv, true); -} - -static void iwl_do_scan_abort(struct iwl_priv *priv) -{ - int ret; - - lockdep_assert_held(&priv->mutex); - - if (!test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n"); - return; - } - - if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan abort in progress\n"); - return; - } - - ret = iwl_send_scan_abort(priv); - if (ret) { - IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret); - iwl_force_scan_end(priv); - } else - IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n"); -} - -/** - * iwl_scan_cancel - Cancel any currently executing HW scan - */ -int iwl_scan_cancel(struct iwl_priv *priv) -{ - IWL_DEBUG_SCAN(priv, "Queuing abort scan\n"); - queue_work(priv->workqueue, &priv->abort_scan); - return 0; -} - -/** - * iwl_scan_cancel_timeout - Cancel any currently executing HW scan - * @ms: amount of time to wait (in milliseconds) for scan to abort - * - */ -void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(ms); - - lockdep_assert_held(&priv->mutex); - - IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n"); - - iwl_do_scan_abort(priv); - - while (time_before_eq(jiffies, timeout)) { - if (!test_bit(STATUS_SCAN_HW, &priv->status)) - goto finished; - msleep(20); - } - - return; - - finished: - /* - * Now STATUS_SCAN_HW is clear. This means that the - * device finished, but the background work is going - * to execute at best as soon as we release the mutex. - * Since we need to be able to issue a new scan right - * after this function returns, run the complete here. - * The STATUS_SCAN_COMPLETE bit will then be cleared - * and prevent the background work from "completing" - * a possible new scan. - */ - iwl_process_scan_complete(priv); -} - -/* Service response to REPLY_SCAN_CMD (0x80) */ -static void iwl_rx_reply_scan(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanreq_notification *notif = (void *)pkt->data; - - IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status); -#endif -} - -/* Service SCAN_START_NOTIFICATION (0x82) */ -static void iwl_rx_scan_start_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanstart_notification *notif = (void *)pkt->data; - - priv->scan_start_tsf = le32_to_cpu(notif->tsf_low); - IWL_DEBUG_SCAN(priv, "Scan start: " - "%d [802.11%s] " - "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", - notif->channel, - notif->band ? "bg" : "a", - le32_to_cpu(notif->tsf_high), - le32_to_cpu(notif->tsf_low), - notif->status, notif->beacon_timer); -} - -/* Service SCAN_RESULTS_NOTIFICATION (0x83) */ -static void iwl_rx_scan_results_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanresults_notification *notif = (void *)pkt->data; - - IWL_DEBUG_SCAN(priv, "Scan ch.res: " - "%d [802.11%s] " - "probe status: %u:%u " - "(TSF: 0x%08X:%08X) - %d " - "elapsed=%lu usec\n", - notif->channel, - notif->band ? "bg" : "a", - notif->probe_status, notif->num_probe_not_sent, - le32_to_cpu(notif->tsf_high), - le32_to_cpu(notif->tsf_low), - le32_to_cpu(notif->statistics[0]), - le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf); -#endif -} - -/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */ -static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scancomplete_notification *scan_notif = (void *)pkt->data; - - IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n", - scan_notif->scanned_channels, - scan_notif->tsf_low, - scan_notif->tsf_high, scan_notif->status); - - IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n", - (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2", - jiffies_to_msecs(jiffies - priv->scan_start)); - - /* - * When aborting, we run the scan completed background work inline - * and the background work must then do nothing. The SCAN_COMPLETE - * bit helps implement that logic and thus needs to be set before - * queueing the work. Also, since the scan abort waits for SCAN_HW - * to clear, we need to set SCAN_COMPLETE before clearing SCAN_HW - * to avoid a race there. - */ - set_bit(STATUS_SCAN_COMPLETE, &priv->status); - clear_bit(STATUS_SCAN_HW, &priv->status); - queue_work(priv->workqueue, &priv->scan_completed); - - if (priv->iw_mode != NL80211_IFTYPE_ADHOC && - iwl_advanced_bt_coexist(priv) && - priv->bt_status != scan_notif->bt_status) { - if (scan_notif->bt_status) { - /* BT on */ - if (!priv->bt_ch_announce) - priv->bt_traffic_load = - IWL_BT_COEX_TRAFFIC_LOAD_HIGH; - /* - * otherwise, no traffic load information provided - * no changes made - */ - } else { - /* BT off */ - priv->bt_traffic_load = - IWL_BT_COEX_TRAFFIC_LOAD_NONE; - } - priv->bt_status = scan_notif->bt_status; - queue_work(priv->workqueue, - &priv->bt_traffic_change_work); - } -} - -void iwl_setup_rx_scan_handlers(struct iwl_priv *priv) -{ - /* scan handlers */ - priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan; - priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif; - priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] = - iwl_rx_scan_results_notif; - priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] = - iwl_rx_scan_complete_notif; -} - -static u16 iwl_get_active_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band, u8 n_probes) -{ - if (band == IEEE80211_BAND_5GHZ) - return IWL_ACTIVE_DWELL_TIME_52 + - IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1); - else - return IWL_ACTIVE_DWELL_TIME_24 + - IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1); -} - -static u16 iwl_limit_dwell(struct iwl_priv *priv, u16 dwell_time) -{ - struct iwl_rxon_context *ctx; - int limits[NUM_IWL_RXON_CTX] = {}; - int n_active = 0; - u16 limit; - - BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); - - /* - * If we're associated, we clamp the dwell time 98% - * of the beacon interval (minus 2 * channel tune time) - * If both contexts are active, we have to restrict to - * 1/2 of the minimum of them, because they might be in - * lock-step with the time inbetween only half of what - * time we'd have in each of them. - */ - for_each_context(priv, ctx) { - switch (ctx->staging.dev_type) { - case RXON_DEV_TYPE_P2P: - /* no timing constraints */ - continue; - case RXON_DEV_TYPE_ESS: - default: - /* timing constraints if associated */ - if (!iwl_is_associated_ctx(ctx)) - continue; - break; - case RXON_DEV_TYPE_CP: - case RXON_DEV_TYPE_2STA: - /* - * These seem to always have timers for TBTT - * active in uCode even when not associated yet. - */ - break; - } - - limits[n_active++] = ctx->beacon_int ?: IWL_PASSIVE_DWELL_BASE; - } - - switch (n_active) { - case 0: - return dwell_time; - case 2: - limit = (limits[1] * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; - limit /= 2; - dwell_time = min(limit, dwell_time); - /* fall through to limit further */ - case 1: - limit = (limits[0] * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; - limit /= n_active; - return min(limit, dwell_time); - default: - WARN_ON_ONCE(1); - return dwell_time; - } -} - -static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band) -{ - u16 passive = (band == IEEE80211_BAND_2GHZ) ? - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; - - return iwl_limit_dwell(priv, passive); -} - -/* Return valid, unused, channel for a passive scan to reset the RF */ -static u8 iwl_get_single_channel_number(struct iwl_priv *priv, - enum ieee80211_band band) -{ - struct ieee80211_supported_band *sband = priv->hw->wiphy->bands[band]; - struct iwl_rxon_context *ctx; - int i; - - for (i = 0; i < sband->n_channels; i++) { - bool busy = false; - - for_each_context(priv, ctx) { - busy = sband->channels[i].hw_value == - le16_to_cpu(ctx->staging.channel); - if (busy) - break; - } - - if (busy) - continue; - - if (!(sband->channels[i].flags & IEEE80211_CHAN_DISABLED)) - return sband->channels[i].hw_value; - } - - return 0; -} - -static int iwl_get_channel_for_reset_scan(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum ieee80211_band band, - struct iwl_scan_channel *scan_ch) -{ - const struct ieee80211_supported_band *sband; - u16 channel; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) { - IWL_ERR(priv, "invalid band\n"); - return 0; - } - - channel = iwl_get_single_channel_number(priv, band); - if (channel) { - scan_ch->channel = cpu_to_le16(channel); - scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; - scan_ch->active_dwell = - cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME); - scan_ch->passive_dwell = - cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME); - /* Set txpower levels to defaults */ - scan_ch->dsp_atten = 110; - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; - else - scan_ch->tx_gain = ((1 << 5) | (5 << 3)); - return 1; - } - - IWL_ERR(priv, "no valid channel found\n"); - return 0; -} - -static int iwl_get_channels_for_scan(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum ieee80211_band band, - u8 is_active, u8 n_probes, - struct iwl_scan_channel *scan_ch) -{ - struct ieee80211_channel *chan; - const struct ieee80211_supported_band *sband; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added, i; - u16 channel; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) - return 0; - - active_dwell = iwl_get_active_dwell_time(priv, band, n_probes); - passive_dwell = iwl_get_passive_dwell_time(priv, band); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - - for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) { - chan = priv->scan_request->channels[i]; - - if (chan->band != band) - continue; - - channel = chan->hw_value; - scan_ch->channel = cpu_to_le16(channel); - - if (!is_active || (chan->flags & IEEE80211_CHAN_NO_IR)) - scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; - else - scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; - - if (n_probes) - scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); - - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - - /* Set txpower levels to defaults */ - scan_ch->dsp_atten = 110; - - /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level: - * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; - */ - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; - else - scan_ch->tx_gain = ((1 << 5) | (5 << 3)); - - IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n", - channel, le32_to_cpu(scan_ch->type), - (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? - "ACTIVE" : "PASSIVE", - (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? - active_dwell : passive_dwell); - - scan_ch++; - added++; - } - - IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added); - return added; -} - -/** - * iwl_fill_probe_req - fill in all required fields and IE for probe request - */ - -static u16 iwl_fill_probe_req(struct ieee80211_mgmt *frame, const u8 *ta, - const u8 *ies, int ie_len, const u8 *ssid, - u8 ssid_len, int left) -{ - int len = 0; - u8 *pos = NULL; - - /* Make sure there is enough space for the probe request, - * two mandatory IEs and the data */ - left -= 24; - if (left < 0) - return 0; - - frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); - eth_broadcast_addr(frame->da); - memcpy(frame->sa, ta, ETH_ALEN); - eth_broadcast_addr(frame->bssid); - frame->seq_ctrl = 0; - - len += 24; - - /* ...next IE... */ - pos = &frame->u.probe_req.variable[0]; - - /* fill in our SSID IE */ - left -= ssid_len + 2; - if (left < 0) - return 0; - *pos++ = WLAN_EID_SSID; - *pos++ = ssid_len; - if (ssid && ssid_len) { - memcpy(pos, ssid, ssid_len); - pos += ssid_len; - } - - len += ssid_len + 2; - - if (WARN_ON(left < ie_len)) - return len; - - if (ies && ie_len) { - memcpy(pos, ies, ie_len); - len += ie_len; - } - - return (u16)len; -} - -static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) -{ - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_CMD, - .len = { sizeof(struct iwl_scan_cmd), }, - }; - struct iwl_scan_cmd *scan; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - u32 rate_flags = 0; - u16 cmd_len = 0; - u16 rx_chain = 0; - enum ieee80211_band band; - u8 n_probes = 0; - u8 rx_ant = priv->nvm_data->valid_rx_ant; - u8 rate; - bool is_active = false; - int chan_mod; - u8 active_chains; - u8 scan_tx_antennas = priv->nvm_data->valid_tx_ant; - int ret; - int scan_cmd_size = sizeof(struct iwl_scan_cmd) + - MAX_SCAN_CHANNEL * sizeof(struct iwl_scan_channel) + - priv->fw->ucode_capa.max_probe_length; - const u8 *ssid = NULL; - u8 ssid_len = 0; - - if (WARN_ON(priv->scan_type == IWL_SCAN_NORMAL && - (!priv->scan_request || - priv->scan_request->n_channels > MAX_SCAN_CHANNEL))) - return -EINVAL; - - lockdep_assert_held(&priv->mutex); - - if (vif) - ctx = iwl_rxon_ctx_from_vif(vif); - - if (!priv->scan_cmd) { - priv->scan_cmd = kmalloc(scan_cmd_size, GFP_KERNEL); - if (!priv->scan_cmd) { - IWL_DEBUG_SCAN(priv, - "fail to allocate memory for scan\n"); - return -ENOMEM; - } - } - scan = priv->scan_cmd; - memset(scan, 0, scan_cmd_size); - - scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; - scan->quiet_time = IWL_ACTIVE_QUIET_TIME; - - if (iwl_is_any_associated(priv)) { - u16 interval = 0; - u32 extra; - u32 suspend_time = 100; - u32 scan_suspend_time = 100; - - IWL_DEBUG_INFO(priv, "Scanning while associated...\n"); - switch (priv->scan_type) { - case IWL_SCAN_RADIO_RESET: - interval = 0; - break; - case IWL_SCAN_NORMAL: - interval = vif->bss_conf.beacon_int; - break; - } - - scan->suspend_time = 0; - scan->max_out_time = cpu_to_le32(200 * 1024); - if (!interval) - interval = suspend_time; - - extra = (suspend_time / interval) << 22; - scan_suspend_time = (extra | - ((suspend_time % interval) * 1024)); - scan->suspend_time = cpu_to_le32(scan_suspend_time); - IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n", - scan_suspend_time, interval); - } - - switch (priv->scan_type) { - case IWL_SCAN_RADIO_RESET: - IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n"); - /* - * Override quiet time as firmware checks that active - * dwell is >= quiet; since we use passive scan it'll - * not actually be used. - */ - scan->quiet_time = cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME); - break; - case IWL_SCAN_NORMAL: - if (priv->scan_request->n_ssids) { - int i, p = 0; - IWL_DEBUG_SCAN(priv, "Kicking off active scan\n"); - /* - * The highest priority SSID is inserted to the - * probe request template. - */ - ssid_len = priv->scan_request->ssids[0].ssid_len; - ssid = priv->scan_request->ssids[0].ssid; - - /* - * Invert the order of ssids, the firmware will invert - * it back. - */ - for (i = priv->scan_request->n_ssids - 1; i >= 1; i--) { - scan->direct_scan[p].id = WLAN_EID_SSID; - scan->direct_scan[p].len = - priv->scan_request->ssids[i].ssid_len; - memcpy(scan->direct_scan[p].ssid, - priv->scan_request->ssids[i].ssid, - priv->scan_request->ssids[i].ssid_len); - n_probes++; - p++; - } - is_active = true; - } else - IWL_DEBUG_SCAN(priv, "Start passive scan.\n"); - break; - } - - scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; - scan->tx_cmd.sta_id = ctx->bcast_sta_id; - scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - switch (priv->scan_band) { - case IEEE80211_BAND_2GHZ: - scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; - chan_mod = le32_to_cpu( - priv->contexts[IWL_RXON_CTX_BSS].active.flags & - RXON_FLG_CHANNEL_MODE_MSK) - >> RXON_FLG_CHANNEL_MODE_POS; - if ((priv->scan_request && priv->scan_request->no_cck) || - chan_mod == CHANNEL_MODE_PURE_40) { - rate = IWL_RATE_6M_PLCP; - } else { - rate = IWL_RATE_1M_PLCP; - rate_flags = RATE_MCS_CCK_MSK; - } - /* - * Internal scans are passive, so we can indiscriminately set - * the BT ignore flag on 2.4 GHz since it applies to TX only. - */ - if (priv->lib->bt_params && - priv->lib->bt_params->advanced_bt_coexist) - scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT; - break; - case IEEE80211_BAND_5GHZ: - rate = IWL_RATE_6M_PLCP; - break; - default: - IWL_WARN(priv, "Invalid scan band\n"); - return -EIO; - } - - /* - * If active scanning is requested but a certain channel is - * marked passive, we can do active scanning if we detect - * transmissions. - * - * There is an issue with some firmware versions that triggers - * a sysassert on a "good CRC threshold" of zero (== disabled), - * on a radar channel even though this means that we should NOT - * send probes. - * - * The "good CRC threshold" is the number of frames that we - * need to receive during our dwell time on a channel before - * sending out probes -- setting this to a huge value will - * mean we never reach it, but at the same time work around - * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER - * here instead of IWL_GOOD_CRC_TH_DISABLED. - * - * This was fixed in later versions along with some other - * scan changes, and the threshold behaves as a flag in those - * versions. - */ - if (priv->new_scan_threshold_behaviour) - scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : - IWL_GOOD_CRC_TH_DISABLED; - else - scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : - IWL_GOOD_CRC_TH_NEVER; - - band = priv->scan_band; - - if (band == IEEE80211_BAND_2GHZ && - priv->lib->bt_params && - priv->lib->bt_params->advanced_bt_coexist) { - /* transmit 2.4 GHz probes only on first antenna */ - scan_tx_antennas = first_antenna(scan_tx_antennas); - } - - priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv, - priv->scan_tx_ant[band], - scan_tx_antennas); - rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]); - scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags); - - /* - * In power save mode while associated use one chain, - * otherwise use all chains - */ - if (test_bit(STATUS_POWER_PMI, &priv->status) && - !(priv->hw->conf.flags & IEEE80211_CONF_IDLE)) { - /* rx_ant has been set to all valid chains previously */ - active_chains = rx_ant & - ((u8)(priv->chain_noise_data.active_chains)); - if (!active_chains) - active_chains = rx_ant; - - IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n", - priv->chain_noise_data.active_chains); - - rx_ant = first_antenna(active_chains); - } - if (priv->lib->bt_params && - priv->lib->bt_params->advanced_bt_coexist && - priv->bt_full_concurrent) { - /* operated as 1x1 in full concurrency mode */ - rx_ant = first_antenna(rx_ant); - } - - /* MIMO is not used here, but value is required */ - rx_chain |= - priv->nvm_data->valid_rx_ant << RXON_RX_CHAIN_VALID_POS; - rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; - rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; - rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; - scan->rx_chain = cpu_to_le16(rx_chain); - switch (priv->scan_type) { - case IWL_SCAN_NORMAL: - cmd_len = iwl_fill_probe_req( - (struct ieee80211_mgmt *)scan->data, - vif->addr, - priv->scan_request->ie, - priv->scan_request->ie_len, - ssid, ssid_len, - scan_cmd_size - sizeof(*scan)); - break; - case IWL_SCAN_RADIO_RESET: - /* use bcast addr, will not be transmitted but must be valid */ - cmd_len = iwl_fill_probe_req( - (struct ieee80211_mgmt *)scan->data, - iwl_bcast_addr, NULL, 0, - NULL, 0, - scan_cmd_size - sizeof(*scan)); - break; - default: - BUG(); - } - scan->tx_cmd.len = cpu_to_le16(cmd_len); - - scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | - RXON_FILTER_BCON_AWARE_MSK); - - switch (priv->scan_type) { - case IWL_SCAN_RADIO_RESET: - scan->channel_count = - iwl_get_channel_for_reset_scan(priv, vif, band, - (void *)&scan->data[cmd_len]); - break; - case IWL_SCAN_NORMAL: - scan->channel_count = - iwl_get_channels_for_scan(priv, vif, band, - is_active, n_probes, - (void *)&scan->data[cmd_len]); - break; - } - - if (scan->channel_count == 0) { - IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count); - return -EIO; - } - - cmd.len[0] += le16_to_cpu(scan->tx_cmd.len) + - scan->channel_count * sizeof(struct iwl_scan_channel); - cmd.data[0] = scan; - cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; - scan->len = cpu_to_le16(cmd.len[0]); - - /* set scan bit here for PAN params */ - set_bit(STATUS_SCAN_HW, &priv->status); - - ret = iwlagn_set_pan_params(priv); - if (ret) { - clear_bit(STATUS_SCAN_HW, &priv->status); - return ret; - } - - ret = iwl_dvm_send_cmd(priv, &cmd); - if (ret) { - clear_bit(STATUS_SCAN_HW, &priv->status); - iwlagn_set_pan_params(priv); - } - - return ret; -} - -void iwl_init_scan_params(struct iwl_priv *priv) -{ - u8 ant_idx = fls(priv->nvm_data->valid_tx_ant) - 1; - if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ]) - priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx; - if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ]) - priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx; -} - -int __must_check iwl_scan_initiate(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum iwl_scan_type scan_type, - enum ieee80211_band band) -{ - int ret; - - lockdep_assert_held(&priv->mutex); - - cancel_delayed_work(&priv->scan_check); - - if (!iwl_is_ready_rf(priv)) { - IWL_WARN(priv, "Request scan called when driver not ready.\n"); - return -EIO; - } - - if (test_bit(STATUS_SCAN_HW, &priv->status)) { - IWL_DEBUG_SCAN(priv, - "Multiple concurrent scan requests in parallel.\n"); - return -EBUSY; - } - - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n"); - return -EBUSY; - } - - IWL_DEBUG_SCAN(priv, "Starting %sscan...\n", - scan_type == IWL_SCAN_NORMAL ? "" : - "internal short "); - - set_bit(STATUS_SCANNING, &priv->status); - priv->scan_type = scan_type; - priv->scan_start = jiffies; - priv->scan_band = band; - - ret = iwlagn_request_scan(priv, vif); - if (ret) { - clear_bit(STATUS_SCANNING, &priv->status); - priv->scan_type = IWL_SCAN_NORMAL; - return ret; - } - - queue_delayed_work(priv->workqueue, &priv->scan_check, - IWL_SCAN_CHECK_WATCHDOG); - - return 0; -} - - -/* - * internal short scan, this function should only been called while associated. - * It will reset and tune the radio to prevent possible RF related problem - */ -void iwl_internal_short_hw_scan(struct iwl_priv *priv) -{ - queue_work(priv->workqueue, &priv->start_internal_scan); -} - -static void iwl_bg_start_internal_scan(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, start_internal_scan); - - IWL_DEBUG_SCAN(priv, "Start internal scan\n"); - - mutex_lock(&priv->mutex); - - if (priv->scan_type == IWL_SCAN_RADIO_RESET) { - IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n"); - goto unlock; - } - - if (test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan already in progress.\n"); - goto unlock; - } - - if (iwl_scan_initiate(priv, NULL, IWL_SCAN_RADIO_RESET, priv->band)) - IWL_DEBUG_SCAN(priv, "failed to start internal short scan\n"); - unlock: - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_scan_check(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, scan_check.work); - - IWL_DEBUG_SCAN(priv, "Scan check work\n"); - - /* Since we are here firmware does not finish scan and - * most likely is in bad shape, so we don't bother to - * send abort command, just force scan complete to mac80211 */ - mutex_lock(&priv->mutex); - iwl_force_scan_end(priv); - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_abort_scan(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan); - - IWL_DEBUG_SCAN(priv, "Abort scan work\n"); - - /* We keep scan_check work queued in case when firmware will not - * report back scan completed notification */ - mutex_lock(&priv->mutex); - iwl_scan_cancel_timeout(priv, 200); - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_scan_completed(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, scan_completed); - - mutex_lock(&priv->mutex); - iwl_process_scan_complete(priv); - mutex_unlock(&priv->mutex); -} - -void iwl_setup_scan_deferred_work(struct iwl_priv *priv) -{ - INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); - INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan); - INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan); - INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check); -} - -void iwl_cancel_scan_deferred_work(struct iwl_priv *priv) -{ - cancel_work_sync(&priv->start_internal_scan); - cancel_work_sync(&priv->abort_scan); - cancel_work_sync(&priv->scan_completed); - - if (cancel_delayed_work_sync(&priv->scan_check)) { - mutex_lock(&priv->mutex); - iwl_force_scan_end(priv); - mutex_unlock(&priv->mutex); - } -} |