diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-fh.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-fh.h | 541 |
1 files changed, 541 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h new file mode 100644 index 000000000..d45dc021c --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -0,0 +1,541 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#ifndef __iwl_fh_h__ +#define __iwl_fh_h__ + +#include <linux/types.h> + +/****************************/ +/* Flow Handler Definitions */ +/****************************/ + +/** + * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) + * Addresses are offsets from device's PCI hardware base address. + */ +#define FH_MEM_LOWER_BOUND (0x1000) +#define FH_MEM_UPPER_BOUND (0x2000) + +/** + * Keep-Warm (KW) buffer base address. + * + * Driver must allocate a 4KByte buffer that is for keeping the + * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency + * DRAM access when doing Txing or Rxing. The dummy accesses prevent host + * from going into a power-savings mode that would cause higher DRAM latency, + * and possible data over/under-runs, before all Tx/Rx is complete. + * + * Driver loads FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) + * of the buffer, which must be 4K aligned. Once this is set up, the device + * automatically invokes keep-warm accesses when normal accesses might not + * be sufficient to maintain fast DRAM response. + * + * Bit fields: + * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned + */ +#define FH_KW_MEM_ADDR_REG (FH_MEM_LOWER_BOUND + 0x97C) + + +/** + * TFD Circular Buffers Base (CBBC) addresses + * + * Device has 16 base pointer registers, one for each of 16 host-DRAM-resident + * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) + * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 + * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte + * aligned (address bits 0-7 must be 0). + * Later devices have 20 (5000 series) or 30 (higher) queues, but the registers + * for them are in different places. + * + * Bit fields in each pointer register: + * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned + */ +#define FH_MEM_CBBC_0_15_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) +#define FH_MEM_CBBC_0_15_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) +#define FH_MEM_CBBC_16_19_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBF0) +#define FH_MEM_CBBC_16_19_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_CBBC_20_31_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xB20) +#define FH_MEM_CBBC_20_31_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xB80) + +/* Find TFD CB base pointer for given queue */ +static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) +{ + if (chnl < 16) + return FH_MEM_CBBC_0_15_LOWER_BOUND + 4 * chnl; + if (chnl < 20) + return FH_MEM_CBBC_16_19_LOWER_BOUND + 4 * (chnl - 16); + WARN_ON_ONCE(chnl >= 32); + return FH_MEM_CBBC_20_31_LOWER_BOUND + 4 * (chnl - 20); +} + + +/** + * Rx SRAM Control and Status Registers (RSCSR) + * + * These registers provide handshake between driver and device for the Rx queue + * (this queue handles *all* command responses, notifications, Rx data, etc. + * sent from uCode to host driver). Unlike Tx, there is only one Rx + * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can + * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer + * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 + * mapping between RBDs and RBs. + * + * Driver must allocate host DRAM memory for the following, and set the + * physical address of each into device registers: + * + * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 + * entries (although any power of 2, up to 4096, is selectable by driver). + * Each entry (1 dword) points to a receive buffer (RB) of consistent size + * (typically 4K, although 8K or 16K are also selectable by driver). + * Driver sets up RB size and number of RBDs in the CB via Rx config + * register FH_MEM_RCSR_CHNL0_CONFIG_REG. + * + * Bit fields within one RBD: + * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned + * + * Driver sets physical address [35:8] of base of RBD circular buffer + * into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. + * + * 2) Rx status buffer, 8 bytes, in which uCode indicates which Rx Buffers + * (RBs) have been filled, via a "write pointer", actually the index of + * the RB's corresponding RBD within the circular buffer. Driver sets + * physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. + * + * Bit fields in lower dword of Rx status buffer (upper dword not used + * by driver: + * 31-12: Not used by driver + * 11- 0: Index of last filled Rx buffer descriptor + * (device writes, driver reads this value) + * + * As the driver prepares Receive Buffers (RBs) for device to fill, driver must + * enter pointers to these RBs into contiguous RBD circular buffer entries, + * and update the device's "write" index register, + * FH_RSCSR_CHNL0_RBDCB_WPTR_REG. + * + * This "write" index corresponds to the *next* RBD that the driver will make + * available, i.e. one RBD past the tail of the ready-to-fill RBDs within + * the circular buffer. This value should initially be 0 (before preparing any + * RBs), should be 8 after preparing the first 8 RBs (for example), and must + * wrap back to 0 at the end of the circular buffer (but don't wrap before + * "read" index has advanced past 1! See below). + * NOTE: DEVICE EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8. + * + * As the device fills RBs (referenced from contiguous RBDs within the circular + * buffer), it updates the Rx status buffer in host DRAM, 2) described above, + * to tell the driver the index of the latest filled RBD. The driver must + * read this "read" index from DRAM after receiving an Rx interrupt from device + * + * The driver must also internally keep track of a third index, which is the + * next RBD to process. When receiving an Rx interrupt, driver should process + * all filled but unprocessed RBs up to, but not including, the RB + * corresponding to the "read" index. For example, if "read" index becomes "1", + * driver may process the RB pointed to by RBD 0. Depending on volume of + * traffic, there may be many RBs to process. + * + * If read index == write index, device thinks there is no room to put new data. + * Due to this, the maximum number of filled RBs is 255, instead of 256. To + * be safe, make sure that there is a gap of at least 2 RBDs between "write" + * and "read" indexes; that is, make sure that there are no more than 254 + * buffers waiting to be filled. + */ +#define FH_MEM_RSCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBC0) +#define FH_MEM_RSCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_RSCSR_CHNL0 (FH_MEM_RSCSR_LOWER_BOUND) + +/** + * Physical base address of 8-byte Rx Status buffer. + * Bit fields: + * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. + */ +#define FH_RSCSR_CHNL0_STTS_WPTR_REG (FH_MEM_RSCSR_CHNL0) + +/** + * Physical base address of Rx Buffer Descriptor Circular Buffer. + * Bit fields: + * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. + */ +#define FH_RSCSR_CHNL0_RBDCB_BASE_REG (FH_MEM_RSCSR_CHNL0 + 0x004) + +/** + * Rx write pointer (index, really!). + * Bit fields: + * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. + * NOTE: For 256-entry circular buffer, use only bits [7:0]. + */ +#define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) +#define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) + +#define FW_RSCSR_CHNL0_RXDCB_RDPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x00c) +#define FH_RSCSR_CHNL0_RDPTR FW_RSCSR_CHNL0_RXDCB_RDPTR_REG + +/** + * Rx Config/Status Registers (RCSR) + * Rx Config Reg for channel 0 (only channel used) + * + * Driver must initialize FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for + * normal operation (see bit fields). + * + * Clearing FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. + * Driver should poll FH_MEM_RSSR_RX_STATUS_REG for + * FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. + * + * Bit fields: + * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, + * '10' operate normally + * 29-24: reserved + * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), + * min "5" for 32 RBDs, max "12" for 4096 RBDs. + * 19-18: reserved + * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, + * '10' 12K, '11' 16K. + * 15-14: reserved + * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) + * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) + * typical value 0x10 (about 1/2 msec) + * 3- 0: reserved + */ +#define FH_MEM_RCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_RCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xCC0) +#define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) + +#define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) +#define FH_MEM_RCSR_CHNL0_RBDCB_WPTR (FH_MEM_RCSR_CHNL0 + 0x8) +#define FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ (FH_MEM_RCSR_CHNL0 + 0x10) + +#define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ +#define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */ +#define FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */ +#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ +#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/ + +#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20) +#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4) +#define RX_RB_TIMEOUT (0x11) + +#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) +#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) +#define FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) + +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) +#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) + +#define FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004) +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) +#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) + +/** + * Rx Shared Status Registers (RSSR) + * + * After stopping Rx DMA channel (writing 0 to + * FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll + * FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. + * + * Bit fields: + * 24: 1 = Channel 0 is idle + * + * FH_MEM_RSSR_SHARED_CTRL_REG and FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV + * contain default values that should not be altered by the driver. + */ +#define FH_MEM_RSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC40) +#define FH_MEM_RSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) + +#define FH_MEM_RSSR_SHARED_CTRL_REG (FH_MEM_RSSR_LOWER_BOUND) +#define FH_MEM_RSSR_RX_STATUS_REG (FH_MEM_RSSR_LOWER_BOUND + 0x004) +#define FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\ + (FH_MEM_RSSR_LOWER_BOUND + 0x008) + +#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) + +#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 +#define FH_MEM_TB_MAX_LENGTH (0x00020000) + +/* TFDB Area - TFDs buffer table */ +#define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) +#define FH_TFDIB_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x900) +#define FH_TFDIB_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x958) +#define FH_TFDIB_CTRL0_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) +#define FH_TFDIB_CTRL1_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) + +/** + * Transmit DMA Channel Control/Status Registers (TCSR) + * + * Device has one configuration register for each of 8 Tx DMA/FIFO channels + * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, + * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. + * + * To use a Tx DMA channel, driver must initialize its + * FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: + * + * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL + * + * All other bits should be 0. + * + * Bit fields: + * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, + * '10' operate normally + * 29- 4: Reserved, set to "0" + * 3: Enable internal DMA requests (1, normal operation), disable (0) + * 2- 0: Reserved, set to "0" + */ +#define FH_TCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) +#define FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60) + +/* Find Control/Status reg for given Tx DMA/FIFO channel */ +#define FH_TCSR_CHNL_NUM (8) + +/* TCSR: tx_config register values */ +#define FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl)) +#define FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4) +#define FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \ + (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8) + +#define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001) + +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008) + +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) + +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000) +#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000) + +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) +#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) + +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003) + +#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20) +#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12) + +/** + * Tx Shared Status Registers (TSSR) + * + * After stopping Tx DMA channel (writing 0 to + * FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll + * FH_TSSR_TX_STATUS_REG until selected Tx channel is idle + * (channel's buffers empty | no pending requests). + * + * Bit fields: + * 31-24: 1 = Channel buffers empty (channel 7:0) + * 23-16: 1 = No pending requests (channel 7:0) + */ +#define FH_TSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xEA0) +#define FH_TSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xEC0) + +#define FH_TSSR_TX_STATUS_REG (FH_TSSR_LOWER_BOUND + 0x010) + +/** + * Bit fields for TSSR(Tx Shared Status & Control) error status register: + * 31: Indicates an address error when accessed to internal memory + * uCode/driver must write "1" in order to clear this flag + * 30: Indicates that Host did not send the expected number of dwords to FH + * uCode/driver must write "1" in order to clear this flag + * 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA + * command was received from the scheduler while the TRB was already full + * with previous command + * uCode/driver must write "1" in order to clear this flag + * 7-0: Each status bit indicates a channel's TxCredit error. When an error + * bit is set, it indicates that the FH has received a full indication + * from the RTC TxFIFO and the current value of the TxCredit counter was + * not equal to zero. This mean that the credit mechanism was not + * synchronized to the TxFIFO status + * uCode/driver must write "1" in order to clear this flag + */ +#define FH_TSSR_TX_ERROR_REG (FH_TSSR_LOWER_BOUND + 0x018) +#define FH_TSSR_TX_MSG_CONFIG_REG (FH_TSSR_LOWER_BOUND + 0x008) + +#define FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16) + +/* Tx service channels */ +#define FH_SRVC_CHNL (9) +#define FH_SRVC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9C8) +#define FH_SRVC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) +#define FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ + (FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) + +#define FH_TX_CHICKEN_BITS_REG (FH_MEM_LOWER_BOUND + 0xE98) +#define FH_TX_TRB_REG(_chan) (FH_MEM_LOWER_BOUND + 0x958 + (_chan) * 4) + +/* Instruct FH to increment the retry count of a packet when + * it is brought from the memory to TX-FIFO + */ +#define FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002) + +#define RX_QUEUE_SIZE 256 +#define RX_QUEUE_MASK 255 +#define RX_QUEUE_SIZE_LOG 8 + +/* + * RX related structures and functions + */ +#define RX_FREE_BUFFERS 64 +#define RX_LOW_WATERMARK 8 + +/** + * struct iwl_rb_status - reserve buffer status + * host memory mapped FH registers + * @closed_rb_num [0:11] - Indicates the index of the RB which was closed + * @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed + * @finished_rb_num [0:11] - Indicates the index of the current RB + * in which the last frame was written to + * @finished_fr_num [0:11] - Indicates the index of the RX Frame + * which was transferred + */ +struct iwl_rb_status { + __le16 closed_rb_num; + __le16 closed_fr_num; + __le16 finished_rb_num; + __le16 finished_fr_nam; + __le32 __unused; +} __packed; + + +#define TFD_QUEUE_SIZE_MAX (256) +#define TFD_QUEUE_SIZE_BC_DUP (64) +#define TFD_QUEUE_BC_SIZE (TFD_QUEUE_SIZE_MAX + TFD_QUEUE_SIZE_BC_DUP) +#define IWL_TX_DMA_MASK DMA_BIT_MASK(36) +#define IWL_NUM_OF_TBS 20 + +static inline u8 iwl_get_dma_hi_addr(dma_addr_t addr) +{ + return (sizeof(addr) > sizeof(u32) ? (addr >> 16) >> 16 : 0) & 0xF; +} +/** + * struct iwl_tfd_tb transmit buffer descriptor within transmit frame descriptor + * + * This structure contains dma address and length of transmission address + * + * @lo: low [31:0] portion of the dma address of TX buffer + * every even is unaligned on 16 bit boundary + * @hi_n_len 0-3 [35:32] portion of dma + * 4-15 length of the tx buffer + */ +struct iwl_tfd_tb { + __le32 lo; + __le16 hi_n_len; +} __packed; + +/** + * struct iwl_tfd + * + * Transmit Frame Descriptor (TFD) + * + * @ __reserved1[3] reserved + * @ num_tbs 0-4 number of active tbs + * 5 reserved + * 6-7 padding (not used) + * @ tbs[20] transmit frame buffer descriptors + * @ __pad padding + * + * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM. + * Both driver and device share these circular buffers, each of which must be + * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes + * + * Driver must indicate the physical address of the base of each + * circular buffer via the FH_MEM_CBBC_QUEUE registers. + * + * Each TFD contains pointer/size information for up to 20 data buffers + * in host DRAM. These buffers collectively contain the (one) frame described + * by the TFD. Each buffer must be a single contiguous block of memory within + * itself, but buffers may be scattered in host DRAM. Each buffer has max size + * of (4K - 4). The concatenates all of a TFD's buffers into a single + * Tx frame, up to 8 KBytes in size. + * + * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. + */ +struct iwl_tfd { + u8 __reserved1[3]; + u8 num_tbs; + struct iwl_tfd_tb tbs[IWL_NUM_OF_TBS]; + __le32 __pad; +} __packed; + +/* Keep Warm Size */ +#define IWL_KW_SIZE 0x1000 /* 4k */ + +/* Fixed (non-configurable) rx data from phy */ + +/** + * struct iwlagn_schedq_bc_tbl scheduler byte count table + * base physical address provided by SCD_DRAM_BASE_ADDR + * @tfd_offset 0-12 - tx command byte count + * 12-16 - station index + */ +struct iwlagn_scd_bc_tbl { + __le16 tfd_offset[TFD_QUEUE_BC_SIZE]; +} __packed; + +#endif /* !__iwl_fh_h__ */ |