summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-prph.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-prph.h')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-prph.h386
1 files changed, 386 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
new file mode 100644
index 000000000..88a57e6e2
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -0,0 +1,386 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#ifndef __iwl_prph_h__
+#define __iwl_prph_h__
+
+/*
+ * Registers in this file are internal, not PCI bus memory mapped.
+ * Driver accesses these via HBUS_TARG_PRPH_* registers.
+ */
+#define PRPH_BASE (0x00000)
+#define PRPH_END (0xFFFFF)
+
+/* APMG (power management) constants */
+#define APMG_BASE (PRPH_BASE + 0x3000)
+#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000)
+#define APMG_CLK_EN_REG (APMG_BASE + 0x0004)
+#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008)
+#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c)
+#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010)
+#define APMG_RFKILL_REG (APMG_BASE + 0x0014)
+#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c)
+#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020)
+#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058)
+#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C)
+
+#define APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001)
+#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
+#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)
+
+#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000)
+#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
+#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
+#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
+#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000)
+#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */
+#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060)
+
+#define APMG_PCIDEV_STT_VAL_PERSIST_DIS (0x00000200)
+#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
+#define APMG_PCIDEV_STT_VAL_WAKE_ME (0x00004000)
+
+#define APMG_RTC_INT_STT_RFKILL (0x10000000)
+
+/* Device system time */
+#define DEVICE_SYSTEM_TIME_REG 0xA0206C
+
+/* Device NMI register */
+#define DEVICE_SET_NMI_REG 0x00a01c30
+#define DEVICE_SET_NMI_VAL_HW BIT(0)
+#define DEVICE_SET_NMI_VAL_DRV BIT(7)
+#define DEVICE_SET_NMI_8000_REG 0x00a01c24
+#define DEVICE_SET_NMI_8000_VAL 0x1000000
+
+/* Shared registers (0x0..0x3ff, via target indirect or periphery */
+#define SHR_BASE 0x00a10000
+
+/* Shared GP1 register */
+#define SHR_APMG_GP1_REG 0x01dc
+#define SHR_APMG_GP1_REG_PRPH (SHR_BASE + SHR_APMG_GP1_REG)
+#define SHR_APMG_GP1_WF_XTAL_LP_EN 0x00000004
+#define SHR_APMG_GP1_CHICKEN_BIT_SELECT 0x80000000
+
+/* Shared DL_CFG register */
+#define SHR_APMG_DL_CFG_REG 0x01c4
+#define SHR_APMG_DL_CFG_REG_PRPH (SHR_BASE + SHR_APMG_DL_CFG_REG)
+#define SHR_APMG_DL_CFG_RTCS_CLK_SELECTOR_MSK 0x000000c0
+#define SHR_APMG_DL_CFG_RTCS_CLK_INTERNAL_XTAL 0x00000080
+#define SHR_APMG_DL_CFG_DL_CLOCK_POWER_UP 0x00000100
+
+/* Shared APMG_XTAL_CFG register */
+#define SHR_APMG_XTAL_CFG_REG 0x1c0
+#define SHR_APMG_XTAL_CFG_XTAL_ON_REQ 0x80000000
+
+/*
+ * Device reset for family 8000
+ * write to bit 24 in order to reset the CPU
+*/
+#define RELEASE_CPU_RESET (0x300C)
+#define RELEASE_CPU_RESET_BIT BIT(24)
+
+/*****************************************************************************
+ * 7000/3000 series SHR DTS addresses *
+ *****************************************************************************/
+
+#define SHR_MISC_WFM_DTS_EN (0x00a10024)
+#define DTSC_CFG_MODE (0x00a10604)
+#define DTSC_VREF_AVG (0x00a10648)
+#define DTSC_VREF5_AVG (0x00a1064c)
+#define DTSC_CFG_MODE_PERIODIC (0x2)
+#define DTSC_PTAT_AVG (0x00a10650)
+
+
+/**
+ * Tx Scheduler
+ *
+ * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
+ * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in
+ * host DRAM. It steers each frame's Tx command (which contains the frame
+ * data) into one of up to 7 prioritized Tx DMA FIFO channels within the
+ * device. A queue maps to only one (selectable by driver) Tx DMA channel,
+ * but one DMA channel may take input from several queues.
+ *
+ * Tx DMA FIFOs have dedicated purposes.
+ *
+ * For 5000 series and up, they are used differently
+ * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c):
+ *
+ * 0 -- EDCA BK (background) frames, lowest priority
+ * 1 -- EDCA BE (best effort) frames, normal priority
+ * 2 -- EDCA VI (video) frames, higher priority
+ * 3 -- EDCA VO (voice) and management frames, highest priority
+ * 4 -- unused
+ * 5 -- unused
+ * 6 -- unused
+ * 7 -- Commands
+ *
+ * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6.
+ * In addition, driver can map the remaining queues to Tx DMA/FIFO
+ * channels 0-3 to support 11n aggregation via EDCA DMA channels.
+ *
+ * The driver sets up each queue to work in one of two modes:
+ *
+ * 1) Scheduler-Ack, in which the scheduler automatically supports a
+ * block-ack (BA) window of up to 64 TFDs. In this mode, each queue
+ * contains TFDs for a unique combination of Recipient Address (RA)
+ * and Traffic Identifier (TID), that is, traffic of a given
+ * Quality-Of-Service (QOS) priority, destined for a single station.
+ *
+ * In scheduler-ack mode, the scheduler keeps track of the Tx status of
+ * each frame within the BA window, including whether it's been transmitted,
+ * and whether it's been acknowledged by the receiving station. The device
+ * automatically processes block-acks received from the receiving STA,
+ * and reschedules un-acked frames to be retransmitted (successful
+ * Tx completion may end up being out-of-order).
+ *
+ * The driver must maintain the queue's Byte Count table in host DRAM
+ * for this mode.
+ * This mode does not support fragmentation.
+ *
+ * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order.
+ * The device may automatically retry Tx, but will retry only one frame
+ * at a time, until receiving ACK from receiving station, or reaching
+ * retry limit and giving up.
+ *
+ * The command queue (#4/#9) must use this mode!
+ * This mode does not require use of the Byte Count table in host DRAM.
+ *
+ * Driver controls scheduler operation via 3 means:
+ * 1) Scheduler registers
+ * 2) Shared scheduler data base in internal SRAM
+ * 3) Shared data in host DRAM
+ *
+ * Initialization:
+ *
+ * When loading, driver should allocate memory for:
+ * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs.
+ * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory
+ * (1024 bytes for each queue).
+ *
+ * After receiving "Alive" response from uCode, driver must initialize
+ * the scheduler (especially for queue #4/#9, the command queue, otherwise
+ * the driver can't issue commands!):
+ */
+#define SCD_MEM_LOWER_BOUND (0x0000)
+
+/**
+ * Max Tx window size is the max number of contiguous TFDs that the scheduler
+ * can keep track of at one time when creating block-ack chains of frames.
+ * Note that "64" matches the number of ack bits in a block-ack packet.
+ */
+#define SCD_WIN_SIZE 64
+#define SCD_FRAME_LIMIT 64
+
+#define SCD_TXFIFO_POS_TID (0)
+#define SCD_TXFIFO_POS_RA (4)
+#define SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF)
+
+/* agn SCD */
+#define SCD_QUEUE_STTS_REG_POS_TXF (0)
+#define SCD_QUEUE_STTS_REG_POS_ACTIVE (3)
+#define SCD_QUEUE_STTS_REG_POS_WSL (4)
+#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
+#define SCD_QUEUE_STTS_REG_MSK (0x017F0000)
+
+#define SCD_QUEUE_CTX_REG1_CREDIT_POS (8)
+#define SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00)
+#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24)
+#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000)
+#define SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0)
+#define SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F)
+#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16)
+#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000)
+#define SCD_GP_CTRL_ENABLE_31_QUEUES BIT(0)
+
+/* Context Data */
+#define SCD_CONTEXT_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x600)
+#define SCD_CONTEXT_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0)
+
+/* Tx status */
+#define SCD_TX_STTS_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0)
+#define SCD_TX_STTS_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0)
+
+/* Translation Data */
+#define SCD_TRANS_TBL_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0)
+#define SCD_TRANS_TBL_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x808)
+
+#define SCD_CONTEXT_QUEUE_OFFSET(x)\
+ (SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8))
+
+#define SCD_TX_STTS_QUEUE_OFFSET(x)\
+ (SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16))
+
+#define SCD_TRANS_TBL_OFFSET_QUEUE(x) \
+ ((SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc)
+
+#define SCD_BASE (PRPH_BASE + 0xa02c00)
+
+#define SCD_SRAM_BASE_ADDR (SCD_BASE + 0x0)
+#define SCD_DRAM_BASE_ADDR (SCD_BASE + 0x8)
+#define SCD_AIT (SCD_BASE + 0x0c)
+#define SCD_TXFACT (SCD_BASE + 0x10)
+#define SCD_ACTIVE (SCD_BASE + 0x14)
+#define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8)
+#define SCD_CHAINEXT_EN (SCD_BASE + 0x244)
+#define SCD_AGGR_SEL (SCD_BASE + 0x248)
+#define SCD_INTERRUPT_MASK (SCD_BASE + 0x108)
+#define SCD_GP_CTRL (SCD_BASE + 0x1a8)
+#define SCD_EN_CTRL (SCD_BASE + 0x254)
+
+/*********************** END TX SCHEDULER *************************************/
+
+/* Oscillator clock */
+#define OSC_CLK (0xa04068)
+#define OSC_CLK_FORCE_CONTROL (0x8)
+
+#define FH_UCODE_LOAD_STATUS (0x1AF0)
+#define CSR_UCODE_LOAD_STATUS_ADDR (0x1E70)
+enum secure_load_status_reg {
+ LMPM_CPU_UCODE_LOADING_STARTED = 0x00000001,
+ LMPM_CPU_HDRS_LOADING_COMPLETED = 0x00000003,
+ LMPM_CPU_UCODE_LOADING_COMPLETED = 0x00000007,
+ LMPM_CPU_STATUS_NUM_OF_LAST_COMPLETED = 0x000000F8,
+ LMPM_CPU_STATUS_NUM_OF_LAST_LOADED_BLOCK = 0x0000FF00,
+};
+
+#define LMPM_SECURE_INSPECTOR_CODE_ADDR (0x1E38)
+#define LMPM_SECURE_INSPECTOR_DATA_ADDR (0x1E3C)
+#define LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR (0x1E78)
+#define LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR (0x1E7C)
+
+#define LMPM_SECURE_INSPECTOR_CODE_MEM_SPACE (0x400000)
+#define LMPM_SECURE_INSPECTOR_DATA_MEM_SPACE (0x402000)
+#define LMPM_SECURE_CPU1_HDR_MEM_SPACE (0x420000)
+#define LMPM_SECURE_CPU2_HDR_MEM_SPACE (0x420400)
+
+/* Rx FIFO */
+#define RXF_SIZE_ADDR (0xa00c88)
+#define RXF_RD_D_SPACE (0xa00c40)
+#define RXF_RD_WR_PTR (0xa00c50)
+#define RXF_RD_RD_PTR (0xa00c54)
+#define RXF_RD_FENCE_PTR (0xa00c4c)
+#define RXF_SET_FENCE_MODE (0xa00c14)
+#define RXF_LD_WR2FENCE (0xa00c1c)
+#define RXF_FIFO_RD_FENCE_INC (0xa00c68)
+#define RXF_SIZE_BYTE_CND_POS (7)
+#define RXF_SIZE_BYTE_CNT_MSK (0x3ff << RXF_SIZE_BYTE_CND_POS)
+#define RXF_DIFF_FROM_PREV (0x200)
+
+#define RXF_LD_FENCE_OFFSET_ADDR (0xa00c10)
+#define RXF_FIFO_RD_FENCE_ADDR (0xa00c0c)
+
+/* Tx FIFO */
+#define TXF_FIFO_ITEM_CNT (0xa00438)
+#define TXF_WR_PTR (0xa00414)
+#define TXF_RD_PTR (0xa00410)
+#define TXF_FENCE_PTR (0xa00418)
+#define TXF_LOCK_FENCE (0xa00424)
+#define TXF_LARC_NUM (0xa0043c)
+#define TXF_READ_MODIFY_DATA (0xa00448)
+#define TXF_READ_MODIFY_ADDR (0xa0044c)
+
+/* FW monitor */
+#define MON_BUFF_SAMPLE_CTL (0xa03c00)
+#define MON_BUFF_BASE_ADDR (0xa03c3c)
+#define MON_BUFF_END_ADDR (0xa03c40)
+#define MON_BUFF_WRPTR (0xa03c44)
+#define MON_BUFF_CYCLE_CNT (0xa03c48)
+
+#define DBGC_IN_SAMPLE (0xa03c00)
+
+/* enable the ID buf for read */
+#define WFPM_PS_CTL_CLR 0xA0300C
+#define WFMP_MAC_ADDR_0 0xA03080
+#define WFMP_MAC_ADDR_1 0xA03084
+#define LMPM_PMG_EN 0xA01CEC
+#define RADIO_REG_SYS_MANUAL_DFT_0 0xAD4078
+#define RFIC_REG_RD 0xAD0470
+#define WFPM_CTRL_REG 0xA03030
+enum {
+ ENABLE_WFPM = BIT(31),
+ WFPM_AUX_CTL_AUX_IF_MAC_OWNER_MSK = 0x80000000,
+};
+
+#define AUX_MISC_REG 0xA200B0
+enum {
+ HW_STEP_LOCATION_BITS = 24,
+};
+
+#define AUX_MISC_MASTER1_EN 0xA20818
+enum aux_misc_master1_en {
+ AUX_MISC_MASTER1_EN_SBE_MSK = 0x1,
+};
+
+#define AUX_MISC_MASTER1_SMPHR_STATUS 0xA20800
+#define RSA_ENABLE 0xA24B08
+#define PREG_AUX_BUS_WPROT_0 0xA04CC0
+
+/* FW chicken bits */
+#define LMPM_CHICK 0xA01FF8
+enum {
+ LMPM_CHICK_EXTENDED_ADDR_SPACE = BIT(0),
+};
+
+#endif /* __iwl_prph_h__ */