summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-trans.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-trans.h')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-trans.h1029
1 files changed, 1029 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
new file mode 100644
index 000000000..56254a837
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -0,0 +1,1029 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef __iwl_trans_h__
+#define __iwl_trans_h__
+
+#include <linux/ieee80211.h>
+#include <linux/mm.h> /* for page_address */
+#include <linux/lockdep.h>
+
+#include "iwl-debug.h"
+#include "iwl-config.h"
+#include "iwl-fw.h"
+#include "iwl-op-mode.h"
+
+/**
+ * DOC: Transport layer - what is it ?
+ *
+ * The transport layer is the layer that deals with the HW directly. It provides
+ * an abstraction of the underlying HW to the upper layer. The transport layer
+ * doesn't provide any policy, algorithm or anything of this kind, but only
+ * mechanisms to make the HW do something. It is not completely stateless but
+ * close to it.
+ * We will have an implementation for each different supported bus.
+ */
+
+/**
+ * DOC: Life cycle of the transport layer
+ *
+ * The transport layer has a very precise life cycle.
+ *
+ * 1) A helper function is called during the module initialization and
+ * registers the bus driver's ops with the transport's alloc function.
+ * 2) Bus's probe calls to the transport layer's allocation functions.
+ * Of course this function is bus specific.
+ * 3) This allocation functions will spawn the upper layer which will
+ * register mac80211.
+ *
+ * 4) At some point (i.e. mac80211's start call), the op_mode will call
+ * the following sequence:
+ * start_hw
+ * start_fw
+ *
+ * 5) Then when finished (or reset):
+ * stop_device
+ *
+ * 6) Eventually, the free function will be called.
+ */
+
+/**
+ * DOC: Host command section
+ *
+ * A host command is a command issued by the upper layer to the fw. There are
+ * several versions of fw that have several APIs. The transport layer is
+ * completely agnostic to these differences.
+ * The transport does provide helper functionality (i.e. SYNC / ASYNC mode),
+ */
+#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f)
+#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
+#define SEQ_TO_INDEX(s) ((s) & 0xff)
+#define INDEX_TO_SEQ(i) ((i) & 0xff)
+#define SEQ_RX_FRAME cpu_to_le16(0x8000)
+
+/**
+ * struct iwl_cmd_header
+ *
+ * This header format appears in the beginning of each command sent from the
+ * driver, and each response/notification received from uCode.
+ */
+struct iwl_cmd_header {
+ u8 cmd; /* Command ID: REPLY_RXON, etc. */
+ u8 flags; /* 0:5 reserved, 6 abort, 7 internal */
+ /*
+ * The driver sets up the sequence number to values of its choosing.
+ * uCode does not use this value, but passes it back to the driver
+ * when sending the response to each driver-originated command, so
+ * the driver can match the response to the command. Since the values
+ * don't get used by uCode, the driver may set up an arbitrary format.
+ *
+ * There is one exception: uCode sets bit 15 when it originates
+ * the response/notification, i.e. when the response/notification
+ * is not a direct response to a command sent by the driver. For
+ * example, uCode issues REPLY_RX when it sends a received frame
+ * to the driver; it is not a direct response to any driver command.
+ *
+ * The Linux driver uses the following format:
+ *
+ * 0:7 tfd index - position within TX queue
+ * 8:12 TX queue id
+ * 13:14 reserved
+ * 15 unsolicited RX or uCode-originated notification
+ */
+ __le16 sequence;
+} __packed;
+
+/* iwl_cmd_header flags value */
+#define IWL_CMD_FAILED_MSK 0x40
+
+
+#define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */
+#define FH_RSCSR_FRAME_INVALID 0x55550000
+#define FH_RSCSR_FRAME_ALIGN 0x40
+
+struct iwl_rx_packet {
+ /*
+ * The first 4 bytes of the RX frame header contain both the RX frame
+ * size and some flags.
+ * Bit fields:
+ * 31: flag flush RB request
+ * 30: flag ignore TC (terminal counter) request
+ * 29: flag fast IRQ request
+ * 28-14: Reserved
+ * 13-00: RX frame size
+ */
+ __le32 len_n_flags;
+ struct iwl_cmd_header hdr;
+ u8 data[];
+} __packed;
+
+static inline u32 iwl_rx_packet_len(const struct iwl_rx_packet *pkt)
+{
+ return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+}
+
+static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt)
+{
+ return iwl_rx_packet_len(pkt) - sizeof(pkt->hdr);
+}
+
+/**
+ * enum CMD_MODE - how to send the host commands ?
+ *
+ * @CMD_ASYNC: Return right away and don't wait for the response
+ * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of
+ * the response. The caller needs to call iwl_free_resp when done.
+ * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the
+ * command queue, but after other high priority commands. Valid only
+ * with CMD_ASYNC.
+ * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle.
+ * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle.
+ * @CMD_WAKE_UP_TRANS: The command response should wake up the trans
+ * (i.e. mark it as non-idle).
+ */
+enum CMD_MODE {
+ CMD_ASYNC = BIT(0),
+ CMD_WANT_SKB = BIT(1),
+ CMD_SEND_IN_RFKILL = BIT(2),
+ CMD_HIGH_PRIO = BIT(3),
+ CMD_SEND_IN_IDLE = BIT(4),
+ CMD_MAKE_TRANS_IDLE = BIT(5),
+ CMD_WAKE_UP_TRANS = BIT(6),
+};
+
+#define DEF_CMD_PAYLOAD_SIZE 320
+
+/**
+ * struct iwl_device_cmd
+ *
+ * For allocation of the command and tx queues, this establishes the overall
+ * size of the largest command we send to uCode, except for commands that
+ * aren't fully copied and use other TFD space.
+ */
+struct iwl_device_cmd {
+ struct iwl_cmd_header hdr; /* uCode API */
+ u8 payload[DEF_CMD_PAYLOAD_SIZE];
+} __packed;
+
+#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
+
+/*
+ * number of transfer buffers (fragments) per transmit frame descriptor;
+ * this is just the driver's idea, the hardware supports 20
+ */
+#define IWL_MAX_CMD_TBS_PER_TFD 2
+
+/**
+ * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command
+ *
+ * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's
+ * ring. The transport layer doesn't map the command's buffer to DMA, but
+ * rather copies it to a previously allocated DMA buffer. This flag tells
+ * the transport layer not to copy the command, but to map the existing
+ * buffer (that is passed in) instead. This saves the memcpy and allows
+ * commands that are bigger than the fixed buffer to be submitted.
+ * Note that a TFD entry after a NOCOPY one cannot be a normal copied one.
+ * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this
+ * chunk internally and free it again after the command completes. This
+ * can (currently) be used only once per command.
+ * Note that a TFD entry after a DUP one cannot be a normal copied one.
+ */
+enum iwl_hcmd_dataflag {
+ IWL_HCMD_DFL_NOCOPY = BIT(0),
+ IWL_HCMD_DFL_DUP = BIT(1),
+};
+
+/**
+ * struct iwl_host_cmd - Host command to the uCode
+ *
+ * @data: array of chunks that composes the data of the host command
+ * @resp_pkt: response packet, if %CMD_WANT_SKB was set
+ * @_rx_page_order: (internally used to free response packet)
+ * @_rx_page_addr: (internally used to free response packet)
+ * @handler_status: return value of the handler of the command
+ * (put in setup_rx_handlers) - valid for SYNC mode only
+ * @flags: can be CMD_*
+ * @len: array of the lengths of the chunks in data
+ * @dataflags: IWL_HCMD_DFL_*
+ * @id: id of the host command
+ */
+struct iwl_host_cmd {
+ const void *data[IWL_MAX_CMD_TBS_PER_TFD];
+ struct iwl_rx_packet *resp_pkt;
+ unsigned long _rx_page_addr;
+ u32 _rx_page_order;
+ int handler_status;
+
+ u32 flags;
+ u16 len[IWL_MAX_CMD_TBS_PER_TFD];
+ u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
+ u8 id;
+};
+
+static inline void iwl_free_resp(struct iwl_host_cmd *cmd)
+{
+ free_pages(cmd->_rx_page_addr, cmd->_rx_page_order);
+}
+
+struct iwl_rx_cmd_buffer {
+ struct page *_page;
+ int _offset;
+ bool _page_stolen;
+ u32 _rx_page_order;
+ unsigned int truesize;
+};
+
+static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r)
+{
+ return (void *)((unsigned long)page_address(r->_page) + r->_offset);
+}
+
+static inline int rxb_offset(struct iwl_rx_cmd_buffer *r)
+{
+ return r->_offset;
+}
+
+static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
+{
+ r->_page_stolen = true;
+ get_page(r->_page);
+ return r->_page;
+}
+
+static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r)
+{
+ __free_pages(r->_page, r->_rx_page_order);
+}
+
+#define MAX_NO_RECLAIM_CMDS 6
+
+#define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
+
+/*
+ * Maximum number of HW queues the transport layer
+ * currently supports
+ */
+#define IWL_MAX_HW_QUEUES 32
+#define IWL_MAX_TID_COUNT 8
+#define IWL_FRAME_LIMIT 64
+
+/**
+ * enum iwl_wowlan_status - WoWLAN image/device status
+ * @IWL_D3_STATUS_ALIVE: firmware is still running after resume
+ * @IWL_D3_STATUS_RESET: device was reset while suspended
+ */
+enum iwl_d3_status {
+ IWL_D3_STATUS_ALIVE,
+ IWL_D3_STATUS_RESET,
+};
+
+/**
+ * enum iwl_trans_status: transport status flags
+ * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed
+ * @STATUS_DEVICE_ENABLED: APM is enabled
+ * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up)
+ * @STATUS_INT_ENABLED: interrupts are enabled
+ * @STATUS_RFKILL: the HW RFkill switch is in KILL position
+ * @STATUS_FW_ERROR: the fw is in error state
+ * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands
+ * are sent
+ * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent
+ */
+enum iwl_trans_status {
+ STATUS_SYNC_HCMD_ACTIVE,
+ STATUS_DEVICE_ENABLED,
+ STATUS_TPOWER_PMI,
+ STATUS_INT_ENABLED,
+ STATUS_RFKILL,
+ STATUS_FW_ERROR,
+ STATUS_TRANS_GOING_IDLE,
+ STATUS_TRANS_IDLE,
+};
+
+/**
+ * struct iwl_trans_config - transport configuration
+ *
+ * @op_mode: pointer to the upper layer.
+ * @cmd_queue: the index of the command queue.
+ * Must be set before start_fw.
+ * @cmd_fifo: the fifo for host commands
+ * @cmd_q_wdg_timeout: the timeout of the watchdog timer for the command queue.
+ * @no_reclaim_cmds: Some devices erroneously don't set the
+ * SEQ_RX_FRAME bit on some notifications, this is the
+ * list of such notifications to filter. Max length is
+ * %MAX_NO_RECLAIM_CMDS.
+ * @n_no_reclaim_cmds: # of commands in list
+ * @rx_buf_size_8k: 8 kB RX buffer size needed for A-MSDUs,
+ * if unset 4k will be the RX buffer size
+ * @bc_table_dword: set to true if the BC table expects the byte count to be
+ * in DWORD (as opposed to bytes)
+ * @scd_set_active: should the transport configure the SCD for HCMD queue
+ * @command_names: array of command names, must be 256 entries
+ * (one for each command); for debugging only
+ * @sdio_adma_addr: the default address to set for the ADMA in SDIO mode until
+ * we get the ALIVE from the uCode
+ */
+struct iwl_trans_config {
+ struct iwl_op_mode *op_mode;
+
+ u8 cmd_queue;
+ u8 cmd_fifo;
+ unsigned int cmd_q_wdg_timeout;
+ const u8 *no_reclaim_cmds;
+ unsigned int n_no_reclaim_cmds;
+
+ bool rx_buf_size_8k;
+ bool bc_table_dword;
+ bool scd_set_active;
+ const char *const *command_names;
+
+ u32 sdio_adma_addr;
+};
+
+struct iwl_trans_dump_data {
+ u32 len;
+ u8 data[];
+};
+
+struct iwl_trans;
+
+struct iwl_trans_txq_scd_cfg {
+ u8 fifo;
+ s8 sta_id;
+ u8 tid;
+ bool aggregate;
+ int frame_limit;
+};
+
+/**
+ * struct iwl_trans_ops - transport specific operations
+ *
+ * All the handlers MUST be implemented
+ *
+ * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken
+ * out of a low power state. From that point on, the HW can send
+ * interrupts. May sleep.
+ * @op_mode_leave: Turn off the HW RF kill indication if on
+ * May sleep
+ * @start_fw: allocates and inits all the resources for the transport
+ * layer. Also kick a fw image.
+ * May sleep
+ * @fw_alive: called when the fw sends alive notification. If the fw provides
+ * the SCD base address in SRAM, then provide it here, or 0 otherwise.
+ * May sleep
+ * @stop_device: stops the whole device (embedded CPU put to reset) and stops
+ * the HW. If low_power is true, the NIC will be put in low power state.
+ * From that point on, the HW will be stopped but will still issue an
+ * interrupt if the HW RF kill switch is triggered.
+ * This callback must do the right thing and not crash even if %start_hw()
+ * was called but not &start_fw(). May sleep.
+ * @d3_suspend: put the device into the correct mode for WoWLAN during
+ * suspend. This is optional, if not implemented WoWLAN will not be
+ * supported. This callback may sleep.
+ * @d3_resume: resume the device after WoWLAN, enabling the opmode to
+ * talk to the WoWLAN image to get its status. This is optional, if not
+ * implemented WoWLAN will not be supported. This callback may sleep.
+ * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted.
+ * If RFkill is asserted in the middle of a SYNC host command, it must
+ * return -ERFKILL straight away.
+ * May sleep only if CMD_ASYNC is not set
+ * @tx: send an skb
+ * Must be atomic
+ * @reclaim: free packet until ssn. Returns a list of freed packets.
+ * Must be atomic
+ * @txq_enable: setup a queue. To setup an AC queue, use the
+ * iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before
+ * this one. The op_mode must not configure the HCMD queue. The scheduler
+ * configuration may be %NULL, in which case the hardware will not be
+ * configured. May sleep.
+ * @txq_disable: de-configure a Tx queue to send AMPDUs
+ * Must be atomic
+ * @wait_tx_queue_empty: wait until tx queues are empty. May sleep.
+ * @freeze_txq_timer: prevents the timer of the queue from firing until the
+ * queue is set to awake. Must be atomic.
+ * @dbgfs_register: add the dbgfs files under this directory. Files will be
+ * automatically deleted.
+ * @write8: write a u8 to a register at offset ofs from the BAR
+ * @write32: write a u32 to a register at offset ofs from the BAR
+ * @read32: read a u32 register at offset ofs from the BAR
+ * @read_prph: read a DWORD from a periphery register
+ * @write_prph: write a DWORD to a periphery register
+ * @read_mem: read device's SRAM in DWORD
+ * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory
+ * will be zeroed.
+ * @configure: configure parameters required by the transport layer from
+ * the op_mode. May be called several times before start_fw, can't be
+ * called after that.
+ * @set_pmi: set the power pmi state
+ * @grab_nic_access: wake the NIC to be able to access non-HBUS regs.
+ * Sleeping is not allowed between grab_nic_access and
+ * release_nic_access.
+ * @release_nic_access: let the NIC go to sleep. The "flags" parameter
+ * must be the same one that was sent before to the grab_nic_access.
+ * @set_bits_mask - set SRAM register according to value and mask.
+ * @ref: grab a reference to the transport/FW layers, disallowing
+ * certain low power states
+ * @unref: release a reference previously taken with @ref. Note that
+ * initially the reference count is 1, making an initial @unref
+ * necessary to allow low power states.
+ * @dump_data: return a vmalloc'ed buffer with debug data, maybe containing last
+ * TX'ed commands and similar. The buffer will be vfree'd by the caller.
+ * Note that the transport must fill in the proper file headers.
+ */
+struct iwl_trans_ops {
+
+ int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power);
+ void (*op_mode_leave)(struct iwl_trans *iwl_trans);
+ int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
+ bool run_in_rfkill);
+ int (*update_sf)(struct iwl_trans *trans,
+ struct iwl_sf_region *st_fwrd_space);
+ void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
+ void (*stop_device)(struct iwl_trans *trans, bool low_power);
+
+ void (*d3_suspend)(struct iwl_trans *trans, bool test);
+ int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status,
+ bool test);
+
+ int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
+
+ int (*tx)(struct iwl_trans *trans, struct sk_buff *skb,
+ struct iwl_device_cmd *dev_cmd, int queue);
+ void (*reclaim)(struct iwl_trans *trans, int queue, int ssn,
+ struct sk_buff_head *skbs);
+
+ void (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn,
+ const struct iwl_trans_txq_scd_cfg *cfg,
+ unsigned int queue_wdg_timeout);
+ void (*txq_disable)(struct iwl_trans *trans, int queue,
+ bool configure_scd);
+
+ int (*dbgfs_register)(struct iwl_trans *trans, struct dentry* dir);
+ int (*wait_tx_queue_empty)(struct iwl_trans *trans, u32 txq_bm);
+ void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs,
+ bool freeze);
+
+ void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val);
+ void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val);
+ u32 (*read32)(struct iwl_trans *trans, u32 ofs);
+ u32 (*read_prph)(struct iwl_trans *trans, u32 ofs);
+ void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val);
+ int (*read_mem)(struct iwl_trans *trans, u32 addr,
+ void *buf, int dwords);
+ int (*write_mem)(struct iwl_trans *trans, u32 addr,
+ const void *buf, int dwords);
+ void (*configure)(struct iwl_trans *trans,
+ const struct iwl_trans_config *trans_cfg);
+ void (*set_pmi)(struct iwl_trans *trans, bool state);
+ bool (*grab_nic_access)(struct iwl_trans *trans, bool silent,
+ unsigned long *flags);
+ void (*release_nic_access)(struct iwl_trans *trans,
+ unsigned long *flags);
+ void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask,
+ u32 value);
+ void (*ref)(struct iwl_trans *trans);
+ void (*unref)(struct iwl_trans *trans);
+ void (*suspend)(struct iwl_trans *trans);
+ void (*resume)(struct iwl_trans *trans);
+
+ struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans);
+};
+
+/**
+ * enum iwl_trans_state - state of the transport layer
+ *
+ * @IWL_TRANS_NO_FW: no fw has sent an alive response
+ * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response
+ */
+enum iwl_trans_state {
+ IWL_TRANS_NO_FW = 0,
+ IWL_TRANS_FW_ALIVE = 1,
+};
+
+/**
+ * enum iwl_d0i3_mode - d0i3 mode
+ *
+ * @IWL_D0I3_MODE_OFF - d0i3 is disabled
+ * @IWL_D0I3_MODE_ON_IDLE - enter d0i3 when device is idle
+ * (e.g. no active references)
+ * @IWL_D0I3_MODE_ON_SUSPEND - enter d0i3 only on suspend
+ * (in case of 'any' trigger)
+ */
+enum iwl_d0i3_mode {
+ IWL_D0I3_MODE_OFF = 0,
+ IWL_D0I3_MODE_ON_IDLE,
+ IWL_D0I3_MODE_ON_SUSPEND,
+};
+
+/**
+ * struct iwl_trans - transport common data
+ *
+ * @ops - pointer to iwl_trans_ops
+ * @op_mode - pointer to the op_mode
+ * @cfg - pointer to the configuration
+ * @status: a bit-mask of transport status flags
+ * @dev - pointer to struct device * that represents the device
+ * @hw_id: a u32 with the ID of the device / sub-device.
+ * Set during transport allocation.
+ * @hw_id_str: a string with info about HW ID. Set during transport allocation.
+ * @pm_support: set to true in start_hw if link pm is supported
+ * @ltr_enabled: set to true if the LTR is enabled
+ * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
+ * The user should use iwl_trans_{alloc,free}_tx_cmd.
+ * @dev_cmd_headroom: room needed for the transport's private use before the
+ * device_cmd for Tx - for internal use only
+ * The user should use iwl_trans_{alloc,free}_tx_cmd.
+ * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before
+ * starting the firmware, used for tracing
+ * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the
+ * start of the 802.11 header in the @rx_mpdu_cmd
+ * @dflt_pwr_limit: default power limit fetched from the platform (ACPI)
+ * @dbg_dest_tlv: points to the destination TLV for debug
+ * @dbg_conf_tlv: array of pointers to configuration TLVs for debug
+ * @dbg_trigger_tlv: array of pointers to triggers TLVs for debug
+ * @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv
+ */
+struct iwl_trans {
+ const struct iwl_trans_ops *ops;
+ struct iwl_op_mode *op_mode;
+ const struct iwl_cfg *cfg;
+ enum iwl_trans_state state;
+ unsigned long status;
+
+ struct device *dev;
+ u32 hw_rev;
+ u32 hw_id;
+ char hw_id_str[52];
+
+ u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
+
+ bool pm_support;
+ bool ltr_enabled;
+
+ /* The following fields are internal only */
+ struct kmem_cache *dev_cmd_pool;
+ size_t dev_cmd_headroom;
+ char dev_cmd_pool_name[50];
+
+ struct dentry *dbgfs_dir;
+
+#ifdef CONFIG_LOCKDEP
+ struct lockdep_map sync_cmd_lockdep_map;
+#endif
+
+ u64 dflt_pwr_limit;
+
+ const struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv;
+ const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX];
+ struct iwl_fw_dbg_trigger_tlv * const *dbg_trigger_tlv;
+ u8 dbg_dest_reg_num;
+
+ enum iwl_d0i3_mode d0i3_mode;
+
+ /* pointer to trans specific struct */
+ /*Ensure that this pointer will always be aligned to sizeof pointer */
+ char trans_specific[0] __aligned(sizeof(void *));
+};
+
+static inline void iwl_trans_configure(struct iwl_trans *trans,
+ const struct iwl_trans_config *trans_cfg)
+{
+ trans->op_mode = trans_cfg->op_mode;
+
+ trans->ops->configure(trans, trans_cfg);
+}
+
+static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power)
+{
+ might_sleep();
+
+ return trans->ops->start_hw(trans, low_power);
+}
+
+static inline int iwl_trans_start_hw(struct iwl_trans *trans)
+{
+ return trans->ops->start_hw(trans, true);
+}
+
+static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans)
+{
+ might_sleep();
+
+ if (trans->ops->op_mode_leave)
+ trans->ops->op_mode_leave(trans);
+
+ trans->op_mode = NULL;
+
+ trans->state = IWL_TRANS_NO_FW;
+}
+
+static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr)
+{
+ might_sleep();
+
+ trans->state = IWL_TRANS_FW_ALIVE;
+
+ trans->ops->fw_alive(trans, scd_addr);
+}
+
+static inline int iwl_trans_start_fw(struct iwl_trans *trans,
+ const struct fw_img *fw,
+ bool run_in_rfkill)
+{
+ might_sleep();
+
+ WARN_ON_ONCE(!trans->rx_mpdu_cmd);
+
+ clear_bit(STATUS_FW_ERROR, &trans->status);
+ return trans->ops->start_fw(trans, fw, run_in_rfkill);
+}
+
+static inline int iwl_trans_update_sf(struct iwl_trans *trans,
+ struct iwl_sf_region *st_fwrd_space)
+{
+ might_sleep();
+
+ if (trans->ops->update_sf)
+ return trans->ops->update_sf(trans, st_fwrd_space);
+
+ return 0;
+}
+
+static inline void _iwl_trans_stop_device(struct iwl_trans *trans,
+ bool low_power)
+{
+ might_sleep();
+
+ trans->ops->stop_device(trans, low_power);
+
+ trans->state = IWL_TRANS_NO_FW;
+}
+
+static inline void iwl_trans_stop_device(struct iwl_trans *trans)
+{
+ _iwl_trans_stop_device(trans, true);
+}
+
+static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test)
+{
+ might_sleep();
+ trans->ops->d3_suspend(trans, test);
+}
+
+static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
+ enum iwl_d3_status *status,
+ bool test)
+{
+ might_sleep();
+ return trans->ops->d3_resume(trans, status, test);
+}
+
+static inline void iwl_trans_ref(struct iwl_trans *trans)
+{
+ if (trans->ops->ref)
+ trans->ops->ref(trans);
+}
+
+static inline void iwl_trans_unref(struct iwl_trans *trans)
+{
+ if (trans->ops->unref)
+ trans->ops->unref(trans);
+}
+
+static inline void iwl_trans_suspend(struct iwl_trans *trans)
+{
+ if (trans->ops->suspend)
+ trans->ops->suspend(trans);
+}
+
+static inline void iwl_trans_resume(struct iwl_trans *trans)
+{
+ if (trans->ops->resume)
+ trans->ops->resume(trans);
+}
+
+static inline struct iwl_trans_dump_data *
+iwl_trans_dump_data(struct iwl_trans *trans)
+{
+ if (!trans->ops->dump_data)
+ return NULL;
+ return trans->ops->dump_data(trans);
+}
+
+static inline int iwl_trans_send_cmd(struct iwl_trans *trans,
+ struct iwl_host_cmd *cmd)
+{
+ int ret;
+
+ if (unlikely(!(cmd->flags & CMD_SEND_IN_RFKILL) &&
+ test_bit(STATUS_RFKILL, &trans->status)))
+ return -ERFKILL;
+
+ if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
+ return -EIO;
+
+ if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) {
+ IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
+ return -EIO;
+ }
+
+ if (!(cmd->flags & CMD_ASYNC))
+ lock_map_acquire_read(&trans->sync_cmd_lockdep_map);
+
+ ret = trans->ops->send_cmd(trans, cmd);
+
+ if (!(cmd->flags & CMD_ASYNC))
+ lock_map_release(&trans->sync_cmd_lockdep_map);
+
+ return ret;
+}
+
+static inline struct iwl_device_cmd *
+iwl_trans_alloc_tx_cmd(struct iwl_trans *trans)
+{
+ u8 *dev_cmd_ptr = kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC);
+
+ if (unlikely(dev_cmd_ptr == NULL))
+ return NULL;
+
+ return (struct iwl_device_cmd *)
+ (dev_cmd_ptr + trans->dev_cmd_headroom);
+}
+
+static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
+ struct iwl_device_cmd *dev_cmd)
+{
+ u8 *dev_cmd_ptr = (u8 *)dev_cmd - trans->dev_cmd_headroom;
+
+ kmem_cache_free(trans->dev_cmd_pool, dev_cmd_ptr);
+}
+
+static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
+ struct iwl_device_cmd *dev_cmd, int queue)
+{
+ if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
+ return -EIO;
+
+ if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
+ IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
+
+ return trans->ops->tx(trans, skb, dev_cmd, queue);
+}
+
+static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue,
+ int ssn, struct sk_buff_head *skbs)
+{
+ if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
+ IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
+
+ trans->ops->reclaim(trans, queue, ssn, skbs);
+}
+
+static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue,
+ bool configure_scd)
+{
+ trans->ops->txq_disable(trans, queue, configure_scd);
+}
+
+static inline void
+iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn,
+ const struct iwl_trans_txq_scd_cfg *cfg,
+ unsigned int queue_wdg_timeout)
+{
+ might_sleep();
+
+ if (unlikely((trans->state != IWL_TRANS_FW_ALIVE)))
+ IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
+
+ trans->ops->txq_enable(trans, queue, ssn, cfg, queue_wdg_timeout);
+}
+
+static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
+ int fifo, int sta_id, int tid,
+ int frame_limit, u16 ssn,
+ unsigned int queue_wdg_timeout)
+{
+ struct iwl_trans_txq_scd_cfg cfg = {
+ .fifo = fifo,
+ .sta_id = sta_id,
+ .tid = tid,
+ .frame_limit = frame_limit,
+ .aggregate = sta_id >= 0,
+ };
+
+ iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg, queue_wdg_timeout);
+}
+
+static inline
+void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo,
+ unsigned int queue_wdg_timeout)
+{
+ struct iwl_trans_txq_scd_cfg cfg = {
+ .fifo = fifo,
+ .sta_id = -1,
+ .tid = IWL_MAX_TID_COUNT,
+ .frame_limit = IWL_FRAME_LIMIT,
+ .aggregate = false,
+ };
+
+ iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout);
+}
+
+static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans,
+ unsigned long txqs,
+ bool freeze)
+{
+ if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
+ IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
+
+ if (trans->ops->freeze_txq_timer)
+ trans->ops->freeze_txq_timer(trans, txqs, freeze);
+}
+
+static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans,
+ u32 txqs)
+{
+ if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
+ IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
+
+ return trans->ops->wait_tx_queue_empty(trans, txqs);
+}
+
+static inline int iwl_trans_dbgfs_register(struct iwl_trans *trans,
+ struct dentry *dir)
+{
+ return trans->ops->dbgfs_register(trans, dir);
+}
+
+static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val)
+{
+ trans->ops->write8(trans, ofs, val);
+}
+
+static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val)
+{
+ trans->ops->write32(trans, ofs, val);
+}
+
+static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs)
+{
+ return trans->ops->read32(trans, ofs);
+}
+
+static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs)
+{
+ return trans->ops->read_prph(trans, ofs);
+}
+
+static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs,
+ u32 val)
+{
+ return trans->ops->write_prph(trans, ofs, val);
+}
+
+static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr,
+ void *buf, int dwords)
+{
+ return trans->ops->read_mem(trans, addr, buf, dwords);
+}
+
+#define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize) \
+ do { \
+ if (__builtin_constant_p(bufsize)) \
+ BUILD_BUG_ON((bufsize) % sizeof(u32)); \
+ iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\
+ } while (0)
+
+static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr)
+{
+ u32 value;
+
+ if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1)))
+ return 0xa5a5a5a5;
+
+ return value;
+}
+
+static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr,
+ const void *buf, int dwords)
+{
+ return trans->ops->write_mem(trans, addr, buf, dwords);
+}
+
+static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr,
+ u32 val)
+{
+ return iwl_trans_write_mem(trans, addr, &val, 1);
+}
+
+static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state)
+{
+ if (trans->ops->set_pmi)
+ trans->ops->set_pmi(trans, state);
+}
+
+static inline void
+iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value)
+{
+ trans->ops->set_bits_mask(trans, reg, mask, value);
+}
+
+#define iwl_trans_grab_nic_access(trans, silent, flags) \
+ __cond_lock(nic_access, \
+ likely((trans)->ops->grab_nic_access(trans, silent, flags)))
+
+static inline void __releases(nic_access)
+iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags)
+{
+ trans->ops->release_nic_access(trans, flags);
+ __release(nic_access);
+}
+
+static inline void iwl_trans_fw_error(struct iwl_trans *trans)
+{
+ if (WARN_ON_ONCE(!trans->op_mode))
+ return;
+
+ /* prevent double restarts due to the same erroneous FW */
+ if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status))
+ iwl_op_mode_nic_error(trans->op_mode);
+}
+
+/*****************************************************
+* driver (transport) register/unregister functions
+******************************************************/
+int __must_check iwl_pci_register_driver(void);
+void iwl_pci_unregister_driver(void);
+
+static inline void trans_lockdep_init(struct iwl_trans *trans)
+{
+#ifdef CONFIG_LOCKDEP
+ static struct lock_class_key __key;
+
+ lockdep_init_map(&trans->sync_cmd_lockdep_map, "sync_cmd_lockdep_map",
+ &__key, 0);
+#endif
+}
+
+#endif /* __iwl_trans_h__ */