diff options
Diffstat (limited to 'drivers/net/wireless/libertas/if_spi.h')
| -rw-r--r-- | drivers/net/wireless/libertas/if_spi.h | 206 |
1 files changed, 0 insertions, 206 deletions
diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h deleted file mode 100644 index e450e31fd..000000000 --- a/drivers/net/wireless/libertas/if_spi.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - * linux/drivers/net/wireless/libertas/if_spi.c - * - * Driver for Marvell SPI WLAN cards. - * - * Copyright 2008 Analog Devices Inc. - * - * Authors: - * Andrey Yurovsky <andrey@cozybit.com> - * Colin McCabe <colin@cozybit.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#ifndef _LBS_IF_SPI_H_ -#define _LBS_IF_SPI_H_ - -#define IPFIELD_ALIGN_OFFSET 2 -#define IF_SPI_CMD_BUF_SIZE 2400 - -/***************** Firmware *****************/ - -#define IF_SPI_FW_NAME_MAX 30 - -#define MAX_MAIN_FW_LOAD_CRC_ERR 10 - -/* Chunk size when loading the helper firmware */ -#define HELPER_FW_LOAD_CHUNK_SZ 64 - -/* Value to write to indicate end of helper firmware dnld */ -#define FIRMWARE_DNLD_OK 0x0000 - -/* Value to check once the main firmware is downloaded */ -#define SUCCESSFUL_FW_DOWNLOAD_MAGIC 0x88888888 - -/***************** SPI Interface Unit *****************/ -/* Masks used in SPI register read/write operations */ -#define IF_SPI_READ_OPERATION_MASK 0x0 -#define IF_SPI_WRITE_OPERATION_MASK 0x8000 - -/* SPI register offsets. 4-byte aligned. */ -#define IF_SPI_DEVICEID_CTRL_REG 0x00 /* DeviceID controller reg */ -#define IF_SPI_IO_READBASE_REG 0x04 /* Read I/O base reg */ -#define IF_SPI_IO_WRITEBASE_REG 0x08 /* Write I/O base reg */ -#define IF_SPI_IO_RDWRPORT_REG 0x0C /* Read/Write I/O port reg */ - -#define IF_SPI_CMD_READBASE_REG 0x10 /* Read command base reg */ -#define IF_SPI_CMD_WRITEBASE_REG 0x14 /* Write command base reg */ -#define IF_SPI_CMD_RDWRPORT_REG 0x18 /* Read/Write command port reg */ - -#define IF_SPI_DATA_READBASE_REG 0x1C /* Read data base reg */ -#define IF_SPI_DATA_WRITEBASE_REG 0x20 /* Write data base reg */ -#define IF_SPI_DATA_RDWRPORT_REG 0x24 /* Read/Write data port reg */ - -#define IF_SPI_SCRATCH_1_REG 0x28 /* Scratch reg 1 */ -#define IF_SPI_SCRATCH_2_REG 0x2C /* Scratch reg 2 */ -#define IF_SPI_SCRATCH_3_REG 0x30 /* Scratch reg 3 */ -#define IF_SPI_SCRATCH_4_REG 0x34 /* Scratch reg 4 */ - -#define IF_SPI_TX_FRAME_SEQ_NUM_REG 0x38 /* Tx frame sequence number reg */ -#define IF_SPI_TX_FRAME_STATUS_REG 0x3C /* Tx frame status reg */ - -#define IF_SPI_HOST_INT_CTRL_REG 0x40 /* Host interrupt controller reg */ - -#define IF_SPI_CARD_INT_CAUSE_REG 0x44 /* Card interrupt cause reg */ -#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interrupt status reg */ -#define IF_SPI_CARD_INT_EVENT_MASK_REG 0x4C /* Card interrupt event mask */ -#define IF_SPI_CARD_INT_STATUS_MASK_REG 0x50 /* Card interrupt status mask */ - -#define IF_SPI_CARD_INT_RESET_SELECT_REG 0x54 /* Card interrupt reset select */ - -#define IF_SPI_HOST_INT_CAUSE_REG 0x58 /* Host interrupt cause reg */ -#define IF_SPI_HOST_INT_STATUS_REG 0x5C /* Host interrupt status reg */ -#define IF_SPI_HOST_INT_EVENT_MASK_REG 0x60 /* Host interrupt event mask */ -#define IF_SPI_HOST_INT_STATUS_MASK_REG 0x64 /* Host interrupt status mask */ -#define IF_SPI_HOST_INT_RESET_SELECT_REG 0x68 /* Host interrupt reset select */ - -#define IF_SPI_DELAY_READ_REG 0x6C /* Delay read reg */ -#define IF_SPI_SPU_BUS_MODE_REG 0x70 /* SPU BUS mode reg */ - -/***************** IF_SPI_DEVICEID_CTRL_REG *****************/ -#define IF_SPI_DEVICEID_CTRL_REG_TO_CARD_ID(dc) ((dc & 0xffff0000)>>16) -#define IF_SPI_DEVICEID_CTRL_REG_TO_CARD_REV(dc) (dc & 0x000000ff) - -/***************** IF_SPI_HOST_INT_CTRL_REG *****************/ -/* Host Interrupt Control bit : Wake up */ -#define IF_SPI_HICT_WAKE_UP (1<<0) -/* Host Interrupt Control bit : WLAN ready */ -#define IF_SPI_HICT_WLAN_READY (1<<1) -/*#define IF_SPI_HICT_FIFO_FIRST_HALF_EMPTY (1<<2) */ -/*#define IF_SPI_HICT_FIFO_SECOND_HALF_EMPTY (1<<3) */ -/*#define IF_SPI_HICT_IRQSRC_WLAN (1<<4) */ -/* Host Interrupt Control bit : Tx auto download */ -#define IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO (1<<5) -/* Host Interrupt Control bit : Rx auto upload */ -#define IF_SPI_HICT_RX_UPLOAD_OVER_AUTO (1<<6) -/* Host Interrupt Control bit : Command auto download */ -#define IF_SPI_HICT_CMD_DOWNLOAD_OVER_AUTO (1<<7) -/* Host Interrupt Control bit : Command auto upload */ -#define IF_SPI_HICT_CMD_UPLOAD_OVER_AUTO (1<<8) - -/***************** IF_SPI_CARD_INT_CAUSE_REG *****************/ -/* Card Interrupt Case bit : Tx download over */ -#define IF_SPI_CIC_TX_DOWNLOAD_OVER (1<<0) -/* Card Interrupt Case bit : Rx upload over */ -#define IF_SPI_CIC_RX_UPLOAD_OVER (1<<1) -/* Card Interrupt Case bit : Command download over */ -#define IF_SPI_CIC_CMD_DOWNLOAD_OVER (1<<2) -/* Card Interrupt Case bit : Host event */ -#define IF_SPI_CIC_HOST_EVENT (1<<3) -/* Card Interrupt Case bit : Command upload over */ -#define IF_SPI_CIC_CMD_UPLOAD_OVER (1<<4) -/* Card Interrupt Case bit : Power down */ -#define IF_SPI_CIC_POWER_DOWN (1<<5) - -/***************** IF_SPI_CARD_INT_STATUS_REG *****************/ -#define IF_SPI_CIS_TX_DOWNLOAD_OVER (1<<0) -#define IF_SPI_CIS_RX_UPLOAD_OVER (1<<1) -#define IF_SPI_CIS_CMD_DOWNLOAD_OVER (1<<2) -#define IF_SPI_CIS_HOST_EVENT (1<<3) -#define IF_SPI_CIS_CMD_UPLOAD_OVER (1<<4) -#define IF_SPI_CIS_POWER_DOWN (1<<5) - -/***************** IF_SPI_HOST_INT_CAUSE_REG *****************/ -#define IF_SPI_HICU_TX_DOWNLOAD_RDY (1<<0) -#define IF_SPI_HICU_RX_UPLOAD_RDY (1<<1) -#define IF_SPI_HICU_CMD_DOWNLOAD_RDY (1<<2) -#define IF_SPI_HICU_CARD_EVENT (1<<3) -#define IF_SPI_HICU_CMD_UPLOAD_RDY (1<<4) -#define IF_SPI_HICU_IO_WR_FIFO_OVERFLOW (1<<5) -#define IF_SPI_HICU_IO_RD_FIFO_UNDERFLOW (1<<6) -#define IF_SPI_HICU_DATA_WR_FIFO_OVERFLOW (1<<7) -#define IF_SPI_HICU_DATA_RD_FIFO_UNDERFLOW (1<<8) -#define IF_SPI_HICU_CMD_WR_FIFO_OVERFLOW (1<<9) -#define IF_SPI_HICU_CMD_RD_FIFO_UNDERFLOW (1<<10) - -/***************** IF_SPI_HOST_INT_STATUS_REG *****************/ -/* Host Interrupt Status bit : Tx download ready */ -#define IF_SPI_HIST_TX_DOWNLOAD_RDY (1<<0) -/* Host Interrupt Status bit : Rx upload ready */ -#define IF_SPI_HIST_RX_UPLOAD_RDY (1<<1) -/* Host Interrupt Status bit : Command download ready */ -#define IF_SPI_HIST_CMD_DOWNLOAD_RDY (1<<2) -/* Host Interrupt Status bit : Card event */ -#define IF_SPI_HIST_CARD_EVENT (1<<3) -/* Host Interrupt Status bit : Command upload ready */ -#define IF_SPI_HIST_CMD_UPLOAD_RDY (1<<4) -/* Host Interrupt Status bit : I/O write FIFO overflow */ -#define IF_SPI_HIST_IO_WR_FIFO_OVERFLOW (1<<5) -/* Host Interrupt Status bit : I/O read FIFO underflow */ -#define IF_SPI_HIST_IO_RD_FIFO_UNDRFLOW (1<<6) -/* Host Interrupt Status bit : Data write FIFO overflow */ -#define IF_SPI_HIST_DATA_WR_FIFO_OVERFLOW (1<<7) -/* Host Interrupt Status bit : Data read FIFO underflow */ -#define IF_SPI_HIST_DATA_RD_FIFO_UNDERFLOW (1<<8) -/* Host Interrupt Status bit : Command write FIFO overflow */ -#define IF_SPI_HIST_CMD_WR_FIFO_OVERFLOW (1<<9) -/* Host Interrupt Status bit : Command read FIFO underflow */ -#define IF_SPI_HIST_CMD_RD_FIFO_UNDERFLOW (1<<10) - -/***************** IF_SPI_HOST_INT_STATUS_MASK_REG *****************/ -/* Host Interrupt Status Mask bit : Tx download ready */ -#define IF_SPI_HISM_TX_DOWNLOAD_RDY (1<<0) -/* Host Interrupt Status Mask bit : Rx upload ready */ -#define IF_SPI_HISM_RX_UPLOAD_RDY (1<<1) -/* Host Interrupt Status Mask bit : Command download ready */ -#define IF_SPI_HISM_CMD_DOWNLOAD_RDY (1<<2) -/* Host Interrupt Status Mask bit : Card event */ -#define IF_SPI_HISM_CARDEVENT (1<<3) -/* Host Interrupt Status Mask bit : Command upload ready */ -#define IF_SPI_HISM_CMD_UPLOAD_RDY (1<<4) -/* Host Interrupt Status Mask bit : I/O write FIFO overflow */ -#define IF_SPI_HISM_IO_WR_FIFO_OVERFLOW (1<<5) -/* Host Interrupt Status Mask bit : I/O read FIFO underflow */ -#define IF_SPI_HISM_IO_RD_FIFO_UNDERFLOW (1<<6) -/* Host Interrupt Status Mask bit : Data write FIFO overflow */ -#define IF_SPI_HISM_DATA_WR_FIFO_OVERFLOW (1<<7) -/* Host Interrupt Status Mask bit : Data write FIFO underflow */ -#define IF_SPI_HISM_DATA_RD_FIFO_UNDERFLOW (1<<8) -/* Host Interrupt Status Mask bit : Command write FIFO overflow */ -#define IF_SPI_HISM_CMD_WR_FIFO_OVERFLOW (1<<9) -/* Host Interrupt Status Mask bit : Command write FIFO underflow */ -#define IF_SPI_HISM_CMD_RD_FIFO_UNDERFLOW (1<<10) - -/***************** IF_SPI_SPU_BUS_MODE_REG *****************/ -/* SCK edge on which the WLAN module outputs data on MISO */ -#define IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_FALLING 0x8 -#define IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING 0x0 - -/* In a SPU read operation, there is a delay between writing the SPU - * register name and getting back data from the WLAN module. - * This can be specified in terms of nanoseconds or in terms of dummy - * clock cycles which the master must output before receiving a response. */ -#define IF_SPI_BUS_MODE_DELAY_METHOD_DUMMY_CLOCK 0x4 -#define IF_SPI_BUS_MODE_DELAY_METHOD_TIMED 0x0 - -/* Some different modes of SPI operation */ -#define IF_SPI_BUS_MODE_8_BIT_ADDRESS_16_BIT_DATA 0x00 -#define IF_SPI_BUS_MODE_8_BIT_ADDRESS_32_BIT_DATA 0x01 -#define IF_SPI_BUS_MODE_16_BIT_ADDRESS_16_BIT_DATA 0x02 -#define IF_SPI_BUS_MODE_16_BIT_ADDRESS_32_BIT_DATA 0x03 - -#endif |