diff options
Diffstat (limited to 'drivers/net/wireless/libertas/tx.c')
| -rw-r--r-- | drivers/net/wireless/libertas/tx.c | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c new file mode 100644 index 000000000..c025f9c18 --- /dev/null +++ b/drivers/net/wireless/libertas/tx.c @@ -0,0 +1,207 @@ +/* + * This file contains the handling of TX in wlan driver. + */ +#include <linux/hardirq.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/sched.h> +#include <linux/export.h> +#include <net/cfg80211.h> + +#include "host.h" +#include "radiotap.h" +#include "decl.h" +#include "defs.h" +#include "dev.h" +#include "mesh.h" + +/** + * convert_radiotap_rate_to_mv - converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE + * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1) + * + * @rate: Input rate + * returns: Output Rate (0 if invalid) + */ +static u32 convert_radiotap_rate_to_mv(u8 rate) +{ + switch (rate) { + case 2: /* 1 Mbps */ + return 0 | (1 << 4); + case 4: /* 2 Mbps */ + return 1 | (1 << 4); + case 11: /* 5.5 Mbps */ + return 2 | (1 << 4); + case 22: /* 11 Mbps */ + return 3 | (1 << 4); + case 12: /* 6 Mbps */ + return 4 | (1 << 4); + case 18: /* 9 Mbps */ + return 5 | (1 << 4); + case 24: /* 12 Mbps */ + return 6 | (1 << 4); + case 36: /* 18 Mbps */ + return 7 | (1 << 4); + case 48: /* 24 Mbps */ + return 8 | (1 << 4); + case 72: /* 36 Mbps */ + return 9 | (1 << 4); + case 96: /* 48 Mbps */ + return 10 | (1 << 4); + case 108: /* 54 Mbps */ + return 11 | (1 << 4); + } + return 0; +} + +/** + * lbs_hard_start_xmit - checks the conditions and sends packet to IF + * layer if everything is ok + * + * @skb: A pointer to skb which includes TX packet + * @dev: A pointer to the &struct net_device + * returns: 0 or -1 + */ +netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long flags; + struct lbs_private *priv = dev->ml_priv; + struct txpd *txpd; + char *p802x_hdr; + uint16_t pkt_len; + netdev_tx_t ret = NETDEV_TX_OK; + + lbs_deb_enter(LBS_DEB_TX); + + /* We need to protect against the queues being restarted before + we get round to stopping them */ + spin_lock_irqsave(&priv->driver_lock, flags); + + if (priv->surpriseremoved) + goto free; + + if (!skb->len || (skb->len > MRVDRV_ETH_TX_PACKET_BUFFER_SIZE)) { + lbs_deb_tx("tx err: skb length %d 0 or > %zd\n", + skb->len, MRVDRV_ETH_TX_PACKET_BUFFER_SIZE); + /* We'll never manage to send this one; drop it and return 'OK' */ + + dev->stats.tx_dropped++; + dev->stats.tx_errors++; + goto free; + } + + + netif_stop_queue(priv->dev); + if (priv->mesh_dev) + netif_stop_queue(priv->mesh_dev); + + if (priv->tx_pending_len) { + /* This can happen if packets come in on the mesh and eth + device simultaneously -- there's no mutual exclusion on + hard_start_xmit() calls between devices. */ + lbs_deb_tx("Packet on %s while busy\n", dev->name); + ret = NETDEV_TX_BUSY; + goto unlock; + } + + priv->tx_pending_len = -1; + spin_unlock_irqrestore(&priv->driver_lock, flags); + + lbs_deb_hex(LBS_DEB_TX, "TX Data", skb->data, min_t(unsigned int, skb->len, 100)); + + txpd = (void *)priv->tx_pending_buf; + memset(txpd, 0, sizeof(struct txpd)); + + p802x_hdr = skb->data; + pkt_len = skb->len; + + if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) { + struct tx_radiotap_hdr *rtap_hdr = (void *)skb->data; + + /* set txpd fields from the radiotap header */ + txpd->tx_control = cpu_to_le32(convert_radiotap_rate_to_mv(rtap_hdr->rate)); + + /* skip the radiotap header */ + p802x_hdr += sizeof(*rtap_hdr); + pkt_len -= sizeof(*rtap_hdr); + + /* copy destination address from 802.11 header */ + memcpy(txpd->tx_dest_addr_high, p802x_hdr + 4, ETH_ALEN); + } else { + /* copy destination address from 802.3 header */ + memcpy(txpd->tx_dest_addr_high, p802x_hdr, ETH_ALEN); + } + + txpd->tx_packet_length = cpu_to_le16(pkt_len); + txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd)); + + lbs_mesh_set_txpd(priv, dev, txpd); + + lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) &txpd, sizeof(struct txpd)); + + lbs_deb_hex(LBS_DEB_TX, "Tx Data", (u8 *) p802x_hdr, le16_to_cpu(txpd->tx_packet_length)); + + memcpy(&txpd[1], p802x_hdr, le16_to_cpu(txpd->tx_packet_length)); + + spin_lock_irqsave(&priv->driver_lock, flags); + priv->tx_pending_len = pkt_len + sizeof(struct txpd); + + lbs_deb_tx("%s lined up packet\n", __func__); + + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + + if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) { + /* Keep the skb to echo it back once Tx feedback is + received from FW */ + skb_orphan(skb); + + /* Keep the skb around for when we get feedback */ + priv->currenttxskb = skb; + } else { + free: + dev_kfree_skb_any(skb); + } + + unlock: + spin_unlock_irqrestore(&priv->driver_lock, flags); + wake_up(&priv->waitq); + + lbs_deb_leave_args(LBS_DEB_TX, "ret %d", ret); + return ret; +} + +/** + * lbs_send_tx_feedback - sends to the host the last transmitted packet, + * filling the radiotap headers with transmission information. + * + * @priv: A pointer to &struct lbs_private structure + * @try_count: A 32-bit value containing transmission retry status. + * + * returns: void + */ +void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count) +{ + struct tx_radiotap_hdr *radiotap_hdr; + + if (priv->wdev->iftype != NL80211_IFTYPE_MONITOR || + priv->currenttxskb == NULL) + return; + + radiotap_hdr = (struct tx_radiotap_hdr *)priv->currenttxskb->data; + + radiotap_hdr->data_retries = try_count ? + (1 + priv->txretrycount - try_count) : 0; + + priv->currenttxskb->protocol = eth_type_trans(priv->currenttxskb, + priv->dev); + netif_rx(priv->currenttxskb); + + priv->currenttxskb = NULL; + + if (priv->connect_status == LBS_CONNECTED) + netif_wake_queue(priv->dev); + + if (priv->mesh_dev && netif_running(priv->mesh_dev)) + netif_wake_queue(priv->mesh_dev); +} +EXPORT_SYMBOL_GPL(lbs_send_tx_feedback); |