summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/p54/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/p54/Kconfig')
-rw-r--r--drivers/net/wireless/p54/Kconfig71
1 files changed, 71 insertions, 0 deletions
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
new file mode 100644
index 000000000..e5b8e5e84
--- /dev/null
+++ b/drivers/net/wireless/p54/Kconfig
@@ -0,0 +1,71 @@
+config P54_COMMON
+ tristate "Softmac Prism54 support"
+ depends on MAC80211
+ select FW_LOADER
+ select CRC_CCITT
+ ---help---
+ This is common code for isl38xx/stlc45xx based modules.
+ This module does nothing by itself - the USB/PCI/SPI front-ends
+ also need to be enabled in order to support any devices.
+
+ These devices require softmac firmware which can be found at
+ <http://wireless.kernel.org/en/users/Drivers/p54>
+
+ If you choose to build a module, it'll be called p54common.
+
+config P54_USB
+ tristate "Prism54 USB support"
+ depends on P54_COMMON && USB
+ select CRC32
+ ---help---
+ This driver is for USB isl38xx based wireless cards.
+
+ These devices require softmac firmware which can be found at
+ <http://wireless.kernel.org/en/users/Drivers/p54>
+
+ If you choose to build a module, it'll be called p54usb.
+
+config P54_PCI
+ tristate "Prism54 PCI support"
+ depends on P54_COMMON && PCI
+ ---help---
+ This driver is for PCI isl38xx based wireless cards.
+ This driver supports most devices that are supported by the
+ fullmac prism54 driver plus many devices which are not
+ supported by the fullmac driver/firmware.
+
+ This driver requires softmac firmware which can be found at
+ <http://wireless.kernel.org/en/users/Drivers/p54>
+
+ If you choose to build a module, it'll be called p54pci.
+
+config P54_SPI
+ tristate "Prism54 SPI (stlc45xx) support"
+ depends on P54_COMMON && SPI_MASTER
+ ---help---
+ This driver is for stlc4550 or stlc4560 based wireless chips
+ such as Nokia's N800/N810 Portable Internet Tablet.
+
+ If you choose to build a module, it'll be called p54spi.
+
+config P54_SPI_DEFAULT_EEPROM
+ bool "Include fallback EEPROM blob"
+ depends on P54_SPI
+ default n
+ ---help---
+ Unlike the PCI or USB devices, the SPI variants don't have
+ a dedicated EEPROM chip to store all device specific values
+ for calibration, country and interface settings.
+
+ The driver will try to load the image "DEBLOBBED", if the
+ file is put at the right place. (usually /lib/firmware.)
+
+ Only if this request fails, this option will provide a
+ backup set of generic values to get the device working.
+
+ Enabling this option adds about 4k to p54spi.
+
+config P54_LEDS
+ bool
+ depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON)
+ default y