diff options
Diffstat (limited to 'drivers/net/wireless/p54/p54spi.c')
| -rw-r--r-- | drivers/net/wireless/p54/p54spi.c | 721 |
1 files changed, 721 insertions, 0 deletions
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c new file mode 100644 index 000000000..e0adae4c4 --- /dev/null +++ b/drivers/net/wireless/p54/p54spi.c @@ -0,0 +1,721 @@ +/* + * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de> + * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> + * + * This driver is a port from stlc45xx: + * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/firmware.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/spi/spi.h> +#include <linux/etherdevice.h> +#include <linux/gpio.h> +#include <linux/slab.h> + +#include "p54spi.h" +#include "p54.h" + +#include "lmac.h" + +#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM +#include "p54spi_eeprom.h" +#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ + +/*(DEBLOBBED)*/ + +/* gpios should be handled in board files and provided via platform data, + * but because it's currently impossible for p54spi to have a header file + * in include/linux, let's use module paramaters for now + */ + +static int p54spi_gpio_power = 97; +module_param(p54spi_gpio_power, int, 0444); +MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line"); + +static int p54spi_gpio_irq = 87; +module_param(p54spi_gpio_irq, int, 0444); +MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line"); + +static void p54spi_spi_read(struct p54s_priv *priv, u8 address, + void *buf, size_t len) +{ + struct spi_transfer t[2]; + struct spi_message m; + __le16 addr; + + /* We first push the address */ + addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15); + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &addr; + t[0].len = sizeof(addr); + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = buf; + t[1].len = len; + spi_message_add_tail(&t[1], &m); + + spi_sync(priv->spi, &m); +} + + +static void p54spi_spi_write(struct p54s_priv *priv, u8 address, + const void *buf, size_t len) +{ + struct spi_transfer t[3]; + struct spi_message m; + __le16 addr; + + /* We first push the address */ + addr = cpu_to_le16(address << 8); + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &addr; + t[0].len = sizeof(addr); + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + t[1].len = len & ~1; + spi_message_add_tail(&t[1], &m); + + if (len % 2) { + __le16 last_word; + last_word = cpu_to_le16(((u8 *)buf)[len - 1]); + + t[2].tx_buf = &last_word; + t[2].len = sizeof(last_word); + spi_message_add_tail(&t[2], &m); + } + + spi_sync(priv->spi, &m); +} + +static u32 p54spi_read32(struct p54s_priv *priv, u8 addr) +{ + __le32 val; + + p54spi_spi_read(priv, addr, &val, sizeof(val)); + + return le32_to_cpu(val); +} + +static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val) +{ + p54spi_spi_write(priv, addr, &val, sizeof(val)); +} + +static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val) +{ + p54spi_spi_write(priv, addr, &val, sizeof(val)); +} + +static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits) +{ + int i; + + for (i = 0; i < 2000; i++) { + u32 buffer = p54spi_read32(priv, reg); + if ((buffer & bits) == bits) + return 1; + } + return 0; +} + +static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base, + const void *buf, size_t len) +{ + if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) { + dev_err(&priv->spi->dev, "spi_write_dma not allowed " + "to DMA write.\n"); + return -EAGAIN; + } + + p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL, + cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE)); + + p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len)); + p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base); + p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len); + return 0; +} + +static int p54spi_request_firmware(struct ieee80211_hw *dev) +{ + struct p54s_priv *priv = dev->priv; + int ret; + + /* FIXME: should driver use it's own struct device? */ + ret = reject_firmware(&priv->firmware, "/*(DEBLOBBED)*/", &priv->spi->dev); + + if (ret < 0) { + dev_err(&priv->spi->dev, "reject_firmware() failed: %d", ret); + return ret; + } + + ret = p54_parse_firmware(dev, priv->firmware); + if (ret) { + release_firmware(priv->firmware); + return ret; + } + + return 0; +} + +static int p54spi_request_eeprom(struct ieee80211_hw *dev) +{ + struct p54s_priv *priv = dev->priv; + const struct firmware *eeprom; + int ret; + + /* allow users to customize their eeprom. + */ + + ret = reject_firmware_direct(&eeprom, "/*(DEBLOBBED)*/", &priv->spi->dev); + if (ret < 0) { +#ifdef CONFIG_P54_SPI_DEFAULT_EEPROM + dev_info(&priv->spi->dev, "loading default eeprom...\n"); + ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom, + sizeof(p54spi_eeprom)); +#else + dev_err(&priv->spi->dev, "Failed to request user eeprom\n"); +#endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ + } else { + dev_info(&priv->spi->dev, "loading user eeprom...\n"); + ret = p54_parse_eeprom(dev, (void *) eeprom->data, + (int)eeprom->size); + release_firmware(eeprom); + } + return ret; +} + +static int p54spi_upload_firmware(struct ieee80211_hw *dev) +{ + struct p54s_priv *priv = dev->priv; + unsigned long fw_len, _fw_len; + unsigned int offset = 0; + int err = 0; + u8 *fw; + + fw_len = priv->firmware->size; + fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL); + if (!fw) + return -ENOMEM; + + /* stop the device */ + p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( + SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | + SPI_CTRL_STAT_START_HALTED)); + + msleep(TARGET_BOOT_SLEEP); + + p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( + SPI_CTRL_STAT_HOST_OVERRIDE | + SPI_CTRL_STAT_START_HALTED)); + + msleep(TARGET_BOOT_SLEEP); + + while (fw_len > 0) { + _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE); + + err = p54spi_spi_write_dma(priv, cpu_to_le32( + ISL38XX_DEV_FIRMWARE_ADDR + offset), + (fw + offset), _fw_len); + if (err < 0) + goto out; + + fw_len -= _fw_len; + offset += _fw_len; + } + + BUG_ON(fw_len != 0); + + /* enable host interrupts */ + p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, + cpu_to_le32(SPI_HOST_INTS_DEFAULT)); + + /* boot the device */ + p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( + SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | + SPI_CTRL_STAT_RAM_BOOT)); + + msleep(TARGET_BOOT_SLEEP); + + p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( + SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT)); + msleep(TARGET_BOOT_SLEEP); + +out: + kfree(fw); + return err; +} + +static void p54spi_power_off(struct p54s_priv *priv) +{ + disable_irq(gpio_to_irq(p54spi_gpio_irq)); + gpio_set_value(p54spi_gpio_power, 0); +} + +static void p54spi_power_on(struct p54s_priv *priv) +{ + gpio_set_value(p54spi_gpio_power, 1); + enable_irq(gpio_to_irq(p54spi_gpio_irq)); + + /* need to wait a while before device can be accessed, the length + * is just a guess + */ + msleep(10); +} + +static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val) +{ + p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val)); +} + +static int p54spi_wakeup(struct p54s_priv *priv) +{ + /* wake the chip */ + p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, + cpu_to_le32(SPI_TARGET_INT_WAKEUP)); + + /* And wait for the READY interrupt */ + if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, + SPI_HOST_INT_READY)) { + dev_err(&priv->spi->dev, "INT_READY timeout\n"); + return -EBUSY; + } + + p54spi_int_ack(priv, SPI_HOST_INT_READY); + return 0; +} + +static inline void p54spi_sleep(struct p54s_priv *priv) +{ + p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, + cpu_to_le32(SPI_TARGET_INT_SLEEP)); +} + +static void p54spi_int_ready(struct p54s_priv *priv) +{ + p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32( + SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)); + + switch (priv->fw_state) { + case FW_STATE_BOOTING: + priv->fw_state = FW_STATE_READY; + complete(&priv->fw_comp); + break; + case FW_STATE_RESETTING: + priv->fw_state = FW_STATE_READY; + /* TODO: reinitialize state */ + break; + default: + break; + } +} + +static int p54spi_rx(struct p54s_priv *priv) +{ + struct sk_buff *skb; + u16 len; + u16 rx_head[2]; +#define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16)) + + if (p54spi_wakeup(priv) < 0) + return -EBUSY; + + /* Read data size and first data word in one SPI transaction + * This is workaround for firmware/DMA bug, + * when first data word gets lost under high load. + */ + p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head)); + len = rx_head[0]; + + if (len == 0) { + p54spi_sleep(priv); + dev_err(&priv->spi->dev, "rx request of zero bytes\n"); + return 0; + } + + /* Firmware may insert up to 4 padding bytes after the lmac header, + * but it does not amend the size of SPI data transfer. + * Such packets has correct data size in header, thus referencing + * past the end of allocated skb. Reserve extra 4 bytes for this case + */ + skb = dev_alloc_skb(len + 4); + if (!skb) { + p54spi_sleep(priv); + dev_err(&priv->spi->dev, "could not alloc skb"); + return -ENOMEM; + } + + if (len <= READAHEAD_SZ) { + memcpy(skb_put(skb, len), rx_head + 1, len); + } else { + memcpy(skb_put(skb, READAHEAD_SZ), rx_head + 1, READAHEAD_SZ); + p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, + skb_put(skb, len - READAHEAD_SZ), + len - READAHEAD_SZ); + } + p54spi_sleep(priv); + /* Put additional bytes to compensate for the possible + * alignment-caused truncation + */ + skb_put(skb, 4); + + if (p54_rx(priv->hw, skb) == 0) + dev_kfree_skb(skb); + + return 0; +} + + +static irqreturn_t p54spi_interrupt(int irq, void *config) +{ + struct spi_device *spi = config; + struct p54s_priv *priv = spi_get_drvdata(spi); + + ieee80211_queue_work(priv->hw, &priv->work); + + return IRQ_HANDLED; +} + +static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb) +{ + struct p54_hdr *hdr = (struct p54_hdr *) skb->data; + int ret = 0; + + if (p54spi_wakeup(priv) < 0) + return -EBUSY; + + ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len); + if (ret < 0) + goto out; + + if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, + SPI_HOST_INT_WR_READY)) { + dev_err(&priv->spi->dev, "WR_READY timeout\n"); + ret = -EAGAIN; + goto out; + } + + p54spi_int_ack(priv, SPI_HOST_INT_WR_READY); + + if (FREE_AFTER_TX(skb)) + p54_free_skb(priv->hw, skb); +out: + p54spi_sleep(priv); + return ret; +} + +static int p54spi_wq_tx(struct p54s_priv *priv) +{ + struct p54s_tx_info *entry; + struct sk_buff *skb; + struct ieee80211_tx_info *info; + struct p54_tx_info *minfo; + struct p54s_tx_info *dinfo; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&priv->tx_lock, flags); + + while (!list_empty(&priv->tx_pending)) { + entry = list_entry(priv->tx_pending.next, + struct p54s_tx_info, tx_list); + + list_del_init(&entry->tx_list); + + spin_unlock_irqrestore(&priv->tx_lock, flags); + + dinfo = container_of((void *) entry, struct p54s_tx_info, + tx_list); + minfo = container_of((void *) dinfo, struct p54_tx_info, + data); + info = container_of((void *) minfo, struct ieee80211_tx_info, + rate_driver_data); + skb = container_of((void *) info, struct sk_buff, cb); + + ret = p54spi_tx_frame(priv, skb); + + if (ret < 0) { + p54_free_skb(priv->hw, skb); + return ret; + } + + spin_lock_irqsave(&priv->tx_lock, flags); + } + spin_unlock_irqrestore(&priv->tx_lock, flags); + return ret; +} + +static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + struct p54s_priv *priv = dev->priv; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data; + struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data; + unsigned long flags; + + BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data))); + + spin_lock_irqsave(&priv->tx_lock, flags); + list_add_tail(&di->tx_list, &priv->tx_pending); + spin_unlock_irqrestore(&priv->tx_lock, flags); + + ieee80211_queue_work(priv->hw, &priv->work); +} + +static void p54spi_work(struct work_struct *work) +{ + struct p54s_priv *priv = container_of(work, struct p54s_priv, work); + u32 ints; + int ret; + + mutex_lock(&priv->mutex); + + if (priv->fw_state == FW_STATE_OFF) + goto out; + + ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); + + if (ints & SPI_HOST_INT_READY) { + p54spi_int_ready(priv); + p54spi_int_ack(priv, SPI_HOST_INT_READY); + } + + if (priv->fw_state != FW_STATE_READY) + goto out; + + if (ints & SPI_HOST_INT_UPDATE) { + p54spi_int_ack(priv, SPI_HOST_INT_UPDATE); + ret = p54spi_rx(priv); + if (ret < 0) + goto out; + } + if (ints & SPI_HOST_INT_SW_UPDATE) { + p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE); + ret = p54spi_rx(priv); + if (ret < 0) + goto out; + } + + ret = p54spi_wq_tx(priv); +out: + mutex_unlock(&priv->mutex); +} + +static int p54spi_op_start(struct ieee80211_hw *dev) +{ + struct p54s_priv *priv = dev->priv; + unsigned long timeout; + int ret = 0; + + if (mutex_lock_interruptible(&priv->mutex)) { + ret = -EINTR; + goto out; + } + + priv->fw_state = FW_STATE_BOOTING; + + p54spi_power_on(priv); + + ret = p54spi_upload_firmware(dev); + if (ret < 0) { + p54spi_power_off(priv); + goto out_unlock; + } + + mutex_unlock(&priv->mutex); + + timeout = msecs_to_jiffies(2000); + timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp, + timeout); + if (!timeout) { + dev_err(&priv->spi->dev, "firmware boot failed"); + p54spi_power_off(priv); + ret = -1; + goto out; + } + + if (mutex_lock_interruptible(&priv->mutex)) { + ret = -EINTR; + p54spi_power_off(priv); + goto out; + } + + WARN_ON(priv->fw_state != FW_STATE_READY); + +out_unlock: + mutex_unlock(&priv->mutex); + +out: + return ret; +} + +static void p54spi_op_stop(struct ieee80211_hw *dev) +{ + struct p54s_priv *priv = dev->priv; + unsigned long flags; + + mutex_lock(&priv->mutex); + WARN_ON(priv->fw_state != FW_STATE_READY); + + p54spi_power_off(priv); + spin_lock_irqsave(&priv->tx_lock, flags); + INIT_LIST_HEAD(&priv->tx_pending); + spin_unlock_irqrestore(&priv->tx_lock, flags); + + priv->fw_state = FW_STATE_OFF; + mutex_unlock(&priv->mutex); + + cancel_work_sync(&priv->work); +} + +static int p54spi_probe(struct spi_device *spi) +{ + struct p54s_priv *priv = NULL; + struct ieee80211_hw *hw; + int ret = -EINVAL; + + hw = p54_init_common(sizeof(*priv)); + if (!hw) { + dev_err(&spi->dev, "could not alloc ieee80211_hw"); + return -ENOMEM; + } + + priv = hw->priv; + priv->hw = hw; + spi_set_drvdata(spi, priv); + priv->spi = spi; + + spi->bits_per_word = 16; + spi->max_speed_hz = 24000000; + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&priv->spi->dev, "spi_setup failed"); + goto err_free; + } + + ret = gpio_request(p54spi_gpio_power, "p54spi power"); + if (ret < 0) { + dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret); + goto err_free; + } + + ret = gpio_request(p54spi_gpio_irq, "p54spi irq"); + if (ret < 0) { + dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret); + goto err_free_gpio_power; + } + + gpio_direction_output(p54spi_gpio_power, 0); + gpio_direction_input(p54spi_gpio_irq); + + ret = request_irq(gpio_to_irq(p54spi_gpio_irq), + p54spi_interrupt, 0, "p54spi", + priv->spi); + if (ret < 0) { + dev_err(&priv->spi->dev, "request_irq() failed"); + goto err_free_gpio_irq; + } + + irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING); + + disable_irq(gpio_to_irq(p54spi_gpio_irq)); + + INIT_WORK(&priv->work, p54spi_work); + init_completion(&priv->fw_comp); + INIT_LIST_HEAD(&priv->tx_pending); + mutex_init(&priv->mutex); + spin_lock_init(&priv->tx_lock); + SET_IEEE80211_DEV(hw, &spi->dev); + priv->common.open = p54spi_op_start; + priv->common.stop = p54spi_op_stop; + priv->common.tx = p54spi_op_tx; + + ret = p54spi_request_firmware(hw); + if (ret < 0) + goto err_free_common; + + ret = p54spi_request_eeprom(hw); + if (ret) + goto err_free_common; + + ret = p54_register_common(hw, &priv->spi->dev); + if (ret) + goto err_free_common; + + return 0; + +err_free_common: + free_irq(gpio_to_irq(p54spi_gpio_irq), spi); +err_free_gpio_irq: + gpio_free(p54spi_gpio_irq); +err_free_gpio_power: + gpio_free(p54spi_gpio_power); +err_free: + p54_free_common(priv->hw); + return ret; +} + +static int p54spi_remove(struct spi_device *spi) +{ + struct p54s_priv *priv = spi_get_drvdata(spi); + + p54_unregister_common(priv->hw); + + free_irq(gpio_to_irq(p54spi_gpio_irq), spi); + + gpio_free(p54spi_gpio_power); + gpio_free(p54spi_gpio_irq); + release_firmware(priv->firmware); + + mutex_destroy(&priv->mutex); + + p54_free_common(priv->hw); + + return 0; +} + + +static struct spi_driver p54spi_driver = { + .driver = { + .name = "p54spi", + .owner = THIS_MODULE, + }, + + .probe = p54spi_probe, + .remove = p54spi_remove, +}; + +module_spi_driver(p54spi_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>"); +MODULE_ALIAS("spi:cx3110x"); +MODULE_ALIAS("spi:p54spi"); +MODULE_ALIAS("spi:stlc45xx"); |