diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2400pci.h')
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2400pci.h | 961 |
1 files changed, 0 insertions, 961 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h deleted file mode 100644 index 0fd3a9d01..000000000 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ /dev/null @@ -1,961 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt2400pci - Abstract: Data structures and registers for the rt2400pci module. - Supported chipsets: RT2460. - */ - -#ifndef RT2400PCI_H -#define RT2400PCI_H - -/* - * RF chip defines. - */ -#define RF2420 0x0000 -#define RF2421 0x0001 - -/* - * Signal information. - * Default offset is required for RSSI <-> dBm conversion. - */ -#define DEFAULT_RSSI_OFFSET 100 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x0000 -#define CSR_REG_SIZE 0x014c -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0100 -#define BBP_BASE 0x0000 -#define BBP_SIZE 0x0020 -#define RF_BASE 0x0004 -#define RF_SIZE 0x000c - -/* - * Number of TX queues. - */ -#define NUM_TX_QUEUES 2 - -/* - * Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * CSR0: ASIC revision number. - */ -#define CSR0 0x0000 -#define CSR0_REVISION FIELD32(0x0000ffff) - -/* - * CSR1: System control register. - * SOFT_RESET: Software reset, 1: reset, 0: normal. - * BBP_RESET: Hardware reset, 1: reset, 0, release. - * HOST_READY: Host ready after initialization. - */ -#define CSR1 0x0004 -#define CSR1_SOFT_RESET FIELD32(0x00000001) -#define CSR1_BBP_RESET FIELD32(0x00000002) -#define CSR1_HOST_READY FIELD32(0x00000004) - -/* - * CSR2: System admin status register (invalid). - */ -#define CSR2 0x0008 - -/* - * CSR3: STA MAC address register 0. - */ -#define CSR3 0x000c -#define CSR3_BYTE0 FIELD32(0x000000ff) -#define CSR3_BYTE1 FIELD32(0x0000ff00) -#define CSR3_BYTE2 FIELD32(0x00ff0000) -#define CSR3_BYTE3 FIELD32(0xff000000) - -/* - * CSR4: STA MAC address register 1. - */ -#define CSR4 0x0010 -#define CSR4_BYTE4 FIELD32(0x000000ff) -#define CSR4_BYTE5 FIELD32(0x0000ff00) - -/* - * CSR5: BSSID register 0. - */ -#define CSR5 0x0014 -#define CSR5_BYTE0 FIELD32(0x000000ff) -#define CSR5_BYTE1 FIELD32(0x0000ff00) -#define CSR5_BYTE2 FIELD32(0x00ff0000) -#define CSR5_BYTE3 FIELD32(0xff000000) - -/* - * CSR6: BSSID register 1. - */ -#define CSR6 0x0018 -#define CSR6_BYTE4 FIELD32(0x000000ff) -#define CSR6_BYTE5 FIELD32(0x0000ff00) - -/* - * CSR7: Interrupt source register. - * Write 1 to clear interrupt. - * TBCN_EXPIRE: Beacon timer expired interrupt. - * TWAKE_EXPIRE: Wakeup timer expired interrupt. - * TATIMW_EXPIRE: Timer of atim window expired interrupt. - * TXDONE_TXRING: Tx ring transmit done interrupt. - * TXDONE_ATIMRING: Atim ring transmit done interrupt. - * TXDONE_PRIORING: Priority ring transmit done interrupt. - * RXDONE: Receive done interrupt. - */ -#define CSR7 0x001c -#define CSR7_TBCN_EXPIRE FIELD32(0x00000001) -#define CSR7_TWAKE_EXPIRE FIELD32(0x00000002) -#define CSR7_TATIMW_EXPIRE FIELD32(0x00000004) -#define CSR7_TXDONE_TXRING FIELD32(0x00000008) -#define CSR7_TXDONE_ATIMRING FIELD32(0x00000010) -#define CSR7_TXDONE_PRIORING FIELD32(0x00000020) -#define CSR7_RXDONE FIELD32(0x00000040) - -/* - * CSR8: Interrupt mask register. - * Write 1 to mask interrupt. - * TBCN_EXPIRE: Beacon timer expired interrupt. - * TWAKE_EXPIRE: Wakeup timer expired interrupt. - * TATIMW_EXPIRE: Timer of atim window expired interrupt. - * TXDONE_TXRING: Tx ring transmit done interrupt. - * TXDONE_ATIMRING: Atim ring transmit done interrupt. - * TXDONE_PRIORING: Priority ring transmit done interrupt. - * RXDONE: Receive done interrupt. - */ -#define CSR8 0x0020 -#define CSR8_TBCN_EXPIRE FIELD32(0x00000001) -#define CSR8_TWAKE_EXPIRE FIELD32(0x00000002) -#define CSR8_TATIMW_EXPIRE FIELD32(0x00000004) -#define CSR8_TXDONE_TXRING FIELD32(0x00000008) -#define CSR8_TXDONE_ATIMRING FIELD32(0x00000010) -#define CSR8_TXDONE_PRIORING FIELD32(0x00000020) -#define CSR8_RXDONE FIELD32(0x00000040) - -/* - * CSR9: Maximum frame length register. - * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12. - */ -#define CSR9 0x0024 -#define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80) - -/* - * CSR11: Back-off control register. - * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1). - * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1). - * SLOT_TIME: Slot time, default is 20us for 802.11b. - * LONG_RETRY: Long retry count. - * SHORT_RETRY: Short retry count. - */ -#define CSR11 0x002c -#define CSR11_CWMIN FIELD32(0x0000000f) -#define CSR11_CWMAX FIELD32(0x000000f0) -#define CSR11_SLOT_TIME FIELD32(0x00001f00) -#define CSR11_LONG_RETRY FIELD32(0x00ff0000) -#define CSR11_SHORT_RETRY FIELD32(0xff000000) - -/* - * CSR12: Synchronization configuration register 0. - * All units in 1/16 TU. - * BEACON_INTERVAL: Beacon interval, default is 100 TU. - * CFPMAX_DURATION: Cfp maximum duration, default is 100 TU. - */ -#define CSR12 0x0030 -#define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff) -#define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000) - -/* - * CSR13: Synchronization configuration register 1. - * All units in 1/16 TU. - * ATIMW_DURATION: Atim window duration. - * CFP_PERIOD: Cfp period, default is 0 TU. - */ -#define CSR13 0x0034 -#define CSR13_ATIMW_DURATION FIELD32(0x0000ffff) -#define CSR13_CFP_PERIOD FIELD32(0x00ff0000) - -/* - * CSR14: Synchronization control register. - * TSF_COUNT: Enable tsf auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * TBCN: Enable tbcn with reload value. - * TCFP: Enable tcfp & cfp / cp switching. - * TATIMW: Enable tatimw & atim window switching. - * BEACON_GEN: Enable beacon generator. - * CFP_COUNT_PRELOAD: Cfp count preload value. - * TBCM_PRELOAD: Tbcn preload value in units of 64us. - */ -#define CSR14 0x0038 -#define CSR14_TSF_COUNT FIELD32(0x00000001) -#define CSR14_TSF_SYNC FIELD32(0x00000006) -#define CSR14_TBCN FIELD32(0x00000008) -#define CSR14_TCFP FIELD32(0x00000010) -#define CSR14_TATIMW FIELD32(0x00000020) -#define CSR14_BEACON_GEN FIELD32(0x00000040) -#define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00) -#define CSR14_TBCM_PRELOAD FIELD32(0xffff0000) - -/* - * CSR15: Synchronization status register. - * CFP: ASIC is in contention-free period. - * ATIMW: ASIC is in ATIM window. - * BEACON_SENT: Beacon is send. - */ -#define CSR15 0x003c -#define CSR15_CFP FIELD32(0x00000001) -#define CSR15_ATIMW FIELD32(0x00000002) -#define CSR15_BEACON_SENT FIELD32(0x00000004) - -/* - * CSR16: TSF timer register 0. - */ -#define CSR16 0x0040 -#define CSR16_LOW_TSFTIMER FIELD32(0xffffffff) - -/* - * CSR17: TSF timer register 1. - */ -#define CSR17 0x0044 -#define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff) - -/* - * CSR18: IFS timer register 0. - * SIFS: Sifs, default is 10 us. - * PIFS: Pifs, default is 30 us. - */ -#define CSR18 0x0048 -#define CSR18_SIFS FIELD32(0x0000ffff) -#define CSR18_PIFS FIELD32(0xffff0000) - -/* - * CSR19: IFS timer register 1. - * DIFS: Difs, default is 50 us. - * EIFS: Eifs, default is 364 us. - */ -#define CSR19 0x004c -#define CSR19_DIFS FIELD32(0x0000ffff) -#define CSR19_EIFS FIELD32(0xffff0000) - -/* - * CSR20: Wakeup timer register. - * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU. - * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. - * AUTOWAKE: Enable auto wakeup / sleep mechanism. - */ -#define CSR20 0x0050 -#define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff) -#define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000) -#define CSR20_AUTOWAKE FIELD32(0x01000000) - -/* - * CSR21: EEPROM control register. - * RELOAD: Write 1 to reload eeprom content. - * TYPE_93C46: 1: 93c46, 0:93c66. - */ -#define CSR21 0x0054 -#define CSR21_RELOAD FIELD32(0x00000001) -#define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002) -#define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004) -#define CSR21_EEPROM_DATA_IN FIELD32(0x00000008) -#define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010) -#define CSR21_TYPE_93C46 FIELD32(0x00000020) - -/* - * CSR22: CFP control register. - * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU. - * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain. - */ -#define CSR22 0x0058 -#define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff) -#define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000) - -/* - * Transmit related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXCSR0: TX Control Register. - * KICK_TX: Kick tx ring. - * KICK_ATIM: Kick atim ring. - * KICK_PRIO: Kick priority ring. - * ABORT: Abort all transmit related ring operation. - */ -#define TXCSR0 0x0060 -#define TXCSR0_KICK_TX FIELD32(0x00000001) -#define TXCSR0_KICK_ATIM FIELD32(0x00000002) -#define TXCSR0_KICK_PRIO FIELD32(0x00000004) -#define TXCSR0_ABORT FIELD32(0x00000008) - -/* - * TXCSR1: TX Configuration Register. - * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps. - * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps. - * TSF_OFFSET: Insert tsf offset. - * AUTORESPONDER: Enable auto responder which include ack & cts. - */ -#define TXCSR1 0x0064 -#define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff) -#define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00) -#define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000) -#define TXCSR1_AUTORESPONDER FIELD32(0x01000000) - -/* - * TXCSR2: Tx descriptor configuration register. - * TXD_SIZE: Tx descriptor size, default is 48. - * NUM_TXD: Number of tx entries in ring. - * NUM_ATIM: Number of atim entries in ring. - * NUM_PRIO: Number of priority entries in ring. - */ -#define TXCSR2 0x0068 -#define TXCSR2_TXD_SIZE FIELD32(0x000000ff) -#define TXCSR2_NUM_TXD FIELD32(0x0000ff00) -#define TXCSR2_NUM_ATIM FIELD32(0x00ff0000) -#define TXCSR2_NUM_PRIO FIELD32(0xff000000) - -/* - * TXCSR3: TX Ring Base address register. - */ -#define TXCSR3 0x006c -#define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR4: TX Atim Ring Base address register. - */ -#define TXCSR4 0x0070 -#define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR5: TX Prio Ring Base address register. - */ -#define TXCSR5 0x0074 -#define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR6: Beacon Base address register. - */ -#define TXCSR6 0x0078 -#define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR7: Auto responder control register. - * AR_POWERMANAGEMENT: Auto responder power management bit. - */ -#define TXCSR7 0x007c -#define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001) - -/* - * Receive related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * RXCSR0: RX Control Register. - * DISABLE_RX: Disable rx engine. - * DROP_CRC: Drop crc error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TODS: Drop frame tods bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * PASS_CRC: Pass all packets with crc attached. - */ -#define RXCSR0 0x0080 -#define RXCSR0_DISABLE_RX FIELD32(0x00000001) -#define RXCSR0_DROP_CRC FIELD32(0x00000002) -#define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004) -#define RXCSR0_DROP_CONTROL FIELD32(0x00000008) -#define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010) -#define RXCSR0_DROP_TODS FIELD32(0x00000020) -#define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040) -#define RXCSR0_PASS_CRC FIELD32(0x00000080) - -/* - * RXCSR1: RX descriptor configuration register. - * RXD_SIZE: Rx descriptor size, default is 32b. - * NUM_RXD: Number of rx entries in ring. - */ -#define RXCSR1 0x0084 -#define RXCSR1_RXD_SIZE FIELD32(0x000000ff) -#define RXCSR1_NUM_RXD FIELD32(0x0000ff00) - -/* - * RXCSR2: RX Ring base address register. - */ -#define RXCSR2 0x0088 -#define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff) - -/* - * RXCSR3: BBP ID register for Rx operation. - * BBP_ID#: BBP register # id. - * BBP_ID#_VALID: BBP register # id is valid or not. - */ -#define RXCSR3 0x0090 -#define RXCSR3_BBP_ID0 FIELD32(0x0000007f) -#define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080) -#define RXCSR3_BBP_ID1 FIELD32(0x00007f00) -#define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000) -#define RXCSR3_BBP_ID2 FIELD32(0x007f0000) -#define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000) -#define RXCSR3_BBP_ID3 FIELD32(0x7f000000) -#define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * RXCSR4: BBP ID register for Rx operation. - * BBP_ID#: BBP register # id. - * BBP_ID#_VALID: BBP register # id is valid or not. - */ -#define RXCSR4 0x0094 -#define RXCSR4_BBP_ID4 FIELD32(0x0000007f) -#define RXCSR4_BBP_ID4_VALID FIELD32(0x00000080) -#define RXCSR4_BBP_ID5 FIELD32(0x00007f00) -#define RXCSR4_BBP_ID5_VALID FIELD32(0x00008000) - -/* - * ARCSR0: Auto Responder PLCP config register 0. - * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data. - * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id. - */ -#define ARCSR0 0x0098 -#define ARCSR0_AR_BBP_DATA0 FIELD32(0x000000ff) -#define ARCSR0_AR_BBP_ID0 FIELD32(0x0000ff00) -#define ARCSR0_AR_BBP_DATA1 FIELD32(0x00ff0000) -#define ARCSR0_AR_BBP_ID1 FIELD32(0xff000000) - -/* - * ARCSR1: Auto Responder PLCP config register 1. - * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data. - * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id. - */ -#define ARCSR1 0x009c -#define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff) -#define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00) -#define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000) -#define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000) - -/* - * Miscellaneous Registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * PCICSR: PCI control register. - * BIG_ENDIAN: 1: big endian, 0: little endian. - * RX_TRESHOLD: Rx threshold in dw to start pci access - * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw. - * TX_TRESHOLD: Tx threshold in dw to start pci access - * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward. - * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw. - * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational. - */ -#define PCICSR 0x008c -#define PCICSR_BIG_ENDIAN FIELD32(0x00000001) -#define PCICSR_RX_TRESHOLD FIELD32(0x00000006) -#define PCICSR_TX_TRESHOLD FIELD32(0x00000018) -#define PCICSR_BURST_LENTH FIELD32(0x00000060) -#define PCICSR_ENABLE_CLK FIELD32(0x00000080) - -/* - * CNT0: FCS error count. - * FCS_ERROR: FCS error count, cleared when read. - */ -#define CNT0 0x00a0 -#define CNT0_FCS_ERROR FIELD32(0x0000ffff) - -/* - * Statistic Register. - * CNT1: PLCP error count. - * CNT2: Long error count. - * CNT3: CCA false alarm count. - * CNT4: Rx FIFO overflow count. - * CNT5: Tx FIFO underrun count. - */ -#define TIMECSR2 0x00a8 -#define CNT1 0x00ac -#define CNT2 0x00b0 -#define TIMECSR3 0x00b4 -#define CNT3 0x00b8 -#define CNT4 0x00bc -#define CNT5 0x00c0 - -/* - * Baseband Control Register. - */ - -/* - * PWRCSR0: Power mode configuration register. - */ -#define PWRCSR0 0x00c4 - -/* - * Power state transition time registers. - */ -#define PSCSR0 0x00c8 -#define PSCSR1 0x00cc -#define PSCSR2 0x00d0 -#define PSCSR3 0x00d4 - -/* - * PWRCSR1: Manual power control / status register. - * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. - * SET_STATE: Set state. Write 1 to trigger, self cleared. - * BBP_DESIRE_STATE: BBP desired state. - * RF_DESIRE_STATE: RF desired state. - * BBP_CURR_STATE: BBP current state. - * RF_CURR_STATE: RF current state. - * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. - */ -#define PWRCSR1 0x00d8 -#define PWRCSR1_SET_STATE FIELD32(0x00000001) -#define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006) -#define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018) -#define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060) -#define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180) -#define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200) - -/* - * TIMECSR: Timer control register. - * US_COUNT: 1 us timer count in units of clock cycles. - * US_64_COUNT: 64 us timer count in units of 1 us timer. - * BEACON_EXPECT: Beacon expect window. - */ -#define TIMECSR 0x00dc -#define TIMECSR_US_COUNT FIELD32(0x000000ff) -#define TIMECSR_US_64_COUNT FIELD32(0x0000ff00) -#define TIMECSR_BEACON_EXPECT FIELD32(0x00070000) - -/* - * MACCSR0: MAC configuration register 0. - */ -#define MACCSR0 0x00e0 - -/* - * MACCSR1: MAC configuration register 1. - * KICK_RX: Kick one-shot rx in one-shot rx mode. - * ONESHOT_RXMODE: Enable one-shot rx mode for debugging. - * BBPRX_RESET_MODE: Ralink bbp rx reset mode. - * AUTO_TXBBP: Auto tx logic access bbp control register. - * AUTO_RXBBP: Auto rx logic access bbp control register. - * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd. - * INTERSIL_IF: Intersil if calibration pin. - */ -#define MACCSR1 0x00e4 -#define MACCSR1_KICK_RX FIELD32(0x00000001) -#define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002) -#define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004) -#define MACCSR1_AUTO_TXBBP FIELD32(0x00000008) -#define MACCSR1_AUTO_RXBBP FIELD32(0x00000010) -#define MACCSR1_LOOPBACK FIELD32(0x00000060) -#define MACCSR1_INTERSIL_IF FIELD32(0x00000080) - -/* - * RALINKCSR: Ralink Rx auto-reset BBCR. - * AR_BBP_DATA#: Auto reset BBP register # data. - * AR_BBP_ID#: Auto reset BBP register # id. - */ -#define RALINKCSR 0x00e8 -#define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff) -#define RALINKCSR_AR_BBP_ID0 FIELD32(0x0000ff00) -#define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000) -#define RALINKCSR_AR_BBP_ID1 FIELD32(0xff000000) - -/* - * BCNCSR: Beacon interval control register. - * CHANGE: Write one to change beacon interval. - * DELTATIME: The delta time value. - * NUM_BEACON: Number of beacon according to mode. - * MODE: Please refer to asic specs. - * PLUS: Plus or minus delta time value. - */ -#define BCNCSR 0x00ec -#define BCNCSR_CHANGE FIELD32(0x00000001) -#define BCNCSR_DELTATIME FIELD32(0x0000001e) -#define BCNCSR_NUM_BEACON FIELD32(0x00001fe0) -#define BCNCSR_MODE FIELD32(0x00006000) -#define BCNCSR_PLUS FIELD32(0x00008000) - -/* - * BBP / RF / IF Control Register. - */ - -/* - * BBPCSR: BBP serial control register. - * VALUE: Register value to program into BBP. - * REGNUM: Selected BBP register. - * BUSY: 1: asic is busy execute BBP programming. - * WRITE_CONTROL: 1: write BBP, 0: read BBP. - */ -#define BBPCSR 0x00f0 -#define BBPCSR_VALUE FIELD32(0x000000ff) -#define BBPCSR_REGNUM FIELD32(0x00007f00) -#define BBPCSR_BUSY FIELD32(0x00008000) -#define BBPCSR_WRITE_CONTROL FIELD32(0x00010000) - -/* - * RFCSR: RF serial control register. - * VALUE: Register value + id to program into rf/if. - * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). - * IF_SELECT: Chip to program: 0: rf, 1: if. - * PLL_LD: Rf pll_ld status. - * BUSY: 1: asic is busy execute rf programming. - */ -#define RFCSR 0x00f4 -#define RFCSR_VALUE FIELD32(0x00ffffff) -#define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000) -#define RFCSR_IF_SELECT FIELD32(0x20000000) -#define RFCSR_PLL_LD FIELD32(0x40000000) -#define RFCSR_BUSY FIELD32(0x80000000) - -/* - * LEDCSR: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - * LINK: 0: linkoff, 1: linkup. - * ACTIVITY: 0: idle, 1: active. - */ -#define LEDCSR 0x00f8 -#define LEDCSR_ON_PERIOD FIELD32(0x000000ff) -#define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00) -#define LEDCSR_LINK FIELD32(0x00010000) -#define LEDCSR_ACTIVITY FIELD32(0x00020000) - -/* - * ASIC pointer information. - * RXPTR: Current RX ring address. - * TXPTR: Current Tx ring address. - * PRIPTR: Current Priority ring address. - * ATIMPTR: Current ATIM ring address. - */ -#define RXPTR 0x0100 -#define TXPTR 0x0104 -#define PRIPTR 0x0108 -#define ATIMPTR 0x010c - -/* - * GPIO and others. - */ - -/* - * GPIOCSR: GPIO control register. - * GPIOCSR_VALx: Actual GPIO pin x value - * GPIOCSR_DIRx: GPIO direction: 0 = output; 1 = input - */ -#define GPIOCSR 0x0120 -#define GPIOCSR_VAL0 FIELD32(0x00000001) -#define GPIOCSR_VAL1 FIELD32(0x00000002) -#define GPIOCSR_VAL2 FIELD32(0x00000004) -#define GPIOCSR_VAL3 FIELD32(0x00000008) -#define GPIOCSR_VAL4 FIELD32(0x00000010) -#define GPIOCSR_VAL5 FIELD32(0x00000020) -#define GPIOCSR_VAL6 FIELD32(0x00000040) -#define GPIOCSR_VAL7 FIELD32(0x00000080) -#define GPIOCSR_DIR0 FIELD32(0x00000100) -#define GPIOCSR_DIR1 FIELD32(0x00000200) -#define GPIOCSR_DIR2 FIELD32(0x00000400) -#define GPIOCSR_DIR3 FIELD32(0x00000800) -#define GPIOCSR_DIR4 FIELD32(0x00001000) -#define GPIOCSR_DIR5 FIELD32(0x00002000) -#define GPIOCSR_DIR6 FIELD32(0x00004000) -#define GPIOCSR_DIR7 FIELD32(0x00008000) - -/* - * BBPPCSR: BBP Pin control register. - */ -#define BBPPCSR 0x0124 - -/* - * BCNCSR1: Tx BEACON offset time control register. - * PRELOAD: Beacon timer offset in units of usec. - */ -#define BCNCSR1 0x0130 -#define BCNCSR1_PRELOAD FIELD32(0x0000ffff) - -/* - * MACCSR2: TX_PE to RX_PE turn-around time control register - * DELAY: RX_PE low width, in units of pci clock cycle. - */ -#define MACCSR2 0x0134 -#define MACCSR2_DELAY FIELD32(0x000000ff) - -/* - * ARCSR2: 1 Mbps ACK/CTS PLCP. - */ -#define ARCSR2 0x013c -#define ARCSR2_SIGNAL FIELD32(0x000000ff) -#define ARCSR2_SERVICE FIELD32(0x0000ff00) -#define ARCSR2_LENGTH_LOW FIELD32(0x00ff0000) -#define ARCSR2_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR3: 2 Mbps ACK/CTS PLCP. - */ -#define ARCSR3 0x0140 -#define ARCSR3_SIGNAL FIELD32(0x000000ff) -#define ARCSR3_SERVICE FIELD32(0x0000ff00) -#define ARCSR3_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR4: 5.5 Mbps ACK/CTS PLCP. - */ -#define ARCSR4 0x0144 -#define ARCSR4_SIGNAL FIELD32(0x000000ff) -#define ARCSR4_SERVICE FIELD32(0x0000ff00) -#define ARCSR4_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR5: 11 Mbps ACK/CTS PLCP. - */ -#define ARCSR5 0x0148 -#define ARCSR5_SIGNAL FIELD32(0x000000ff) -#define ARCSR5_SERVICE FIELD32(0x0000ff00) -#define ARCSR5_LENGTH FIELD32(0xffff0000) - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R1: TX antenna control - */ -#define BBP_R1_TX_ANTENNA FIELD8(0x03) - -/* - * R4: RX antenna control - */ -#define BBP_R4_RX_ANTENNA FIELD8(0x06) - -/* - * RF registers - */ - -/* - * RF 1 - */ -#define RF1_TUNER FIELD32(0x00020000) - -/* - * RF 3 - */ -#define RF3_TUNER FIELD32(0x00000100) -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antenna's. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RF_TYPE: Rf_type of this adapter. - * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd. - * RX_AGCVGC: 0: disable, 1:enable BBP R13 tuning. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - */ -#define EEPROM_ANTENNA 0x0b -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0040) -#define EEPROM_ANTENNA_LED_MODE FIELD16(0x0180) -#define EEPROM_ANTENNA_RX_AGCVGC_TUNING FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x0c -#define EEPROM_BBP_SIZE 7 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER - */ -#define EEPROM_TXPOWER_START 0x13 -#define EEPROM_TXPOWER_SIZE 7 -#define EEPROM_TXPOWER_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_2 FIELD16(0xff00) - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE (8 * sizeof(__le32)) -#define RXD_DESC_SIZE (8 * sizeof(__le32)) - -/* - * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. - */ - -/* - * Word0 - */ -#define TXD_W0_OWNER_NIC FIELD32(0x00000001) -#define TXD_W0_VALID FIELD32(0x00000002) -#define TXD_W0_RESULT FIELD32(0x0000001c) -#define TXD_W0_RETRY_COUNT FIELD32(0x000000e0) -#define TXD_W0_MORE_FRAG FIELD32(0x00000100) -#define TXD_W0_ACK FIELD32(0x00000200) -#define TXD_W0_TIMESTAMP FIELD32(0x00000400) -#define TXD_W0_RTS FIELD32(0x00000800) -#define TXD_W0_IFS FIELD32(0x00006000) -#define TXD_W0_RETRY_MODE FIELD32(0x00008000) -#define TXD_W0_AGC FIELD32(0x00ff0000) -#define TXD_W0_R2 FIELD32(0xff000000) - -/* - * Word1 - */ -#define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) - -/* - * Word2 - */ -#define TXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff) -#define TXD_W2_DATABYTE_COUNT FIELD32(0xffff0000) - -/* - * Word3 & 4: PLCP information - * The PLCP values should be treated as if they were BBP values. - */ -#define TXD_W3_PLCP_SIGNAL FIELD32(0x000000ff) -#define TXD_W3_PLCP_SIGNAL_REGNUM FIELD32(0x00007f00) -#define TXD_W3_PLCP_SIGNAL_BUSY FIELD32(0x00008000) -#define TXD_W3_PLCP_SERVICE FIELD32(0x00ff0000) -#define TXD_W3_PLCP_SERVICE_REGNUM FIELD32(0x7f000000) -#define TXD_W3_PLCP_SERVICE_BUSY FIELD32(0x80000000) - -#define TXD_W4_PLCP_LENGTH_LOW FIELD32(0x000000ff) -#define TXD_W3_PLCP_LENGTH_LOW_REGNUM FIELD32(0x00007f00) -#define TXD_W3_PLCP_LENGTH_LOW_BUSY FIELD32(0x00008000) -#define TXD_W4_PLCP_LENGTH_HIGH FIELD32(0x00ff0000) -#define TXD_W3_PLCP_LENGTH_HIGH_REGNUM FIELD32(0x7f000000) -#define TXD_W3_PLCP_LENGTH_HIGH_BUSY FIELD32(0x80000000) - -/* - * Word5 - */ -#define TXD_W5_BBCR4 FIELD32(0x0000ffff) -#define TXD_W5_AGC_REG FIELD32(0x007f0000) -#define TXD_W5_AGC_REG_VALID FIELD32(0x00800000) -#define TXD_W5_XXX_REG FIELD32(0x7f000000) -#define TXD_W5_XXX_REG_VALID FIELD32(0x80000000) - -/* - * Word6 - */ -#define TXD_W6_SK_BUFF FIELD32(0xffffffff) - -/* - * Word7 - */ -#define TXD_W7_RESERVED FIELD32(0xffffffff) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - */ -#define RXD_W0_OWNER_NIC FIELD32(0x00000001) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) -#define RXD_W0_MULTICAST FIELD32(0x00000004) -#define RXD_W0_BROADCAST FIELD32(0x00000008) -#define RXD_W0_MY_BSS FIELD32(0x00000010) -#define RXD_W0_CRC_ERROR FIELD32(0x00000020) -#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) -#define RXD_W0_DATABYTE_COUNT FIELD32(0xffff0000) - -/* - * Word1 - */ -#define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) - -/* - * Word2 - */ -#define RXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff) -#define RXD_W2_BBR0 FIELD32(0x00ff0000) -#define RXD_W2_SIGNAL FIELD32(0xff000000) - -/* - * Word3 - */ -#define RXD_W3_RSSI FIELD32(0x000000ff) -#define RXD_W3_BBR3 FIELD32(0x0000ff00) -#define RXD_W3_BBR4 FIELD32(0x00ff0000) -#define RXD_W3_BBR5 FIELD32(0xff000000) - -/* - * Word4 - */ -#define RXD_W4_RX_END_TIME FIELD32(0xffffffff) - -/* - * Word5 & 6 & 7: Reserved - */ -#define RXD_W5_RESERVED FIELD32(0xffffffff) -#define RXD_W6_RESERVED FIELD32(0xffffffff) -#define RXD_W7_RESERVED FIELD32(0xffffffff) - -/* - * Macros for converting txpower from EEPROM to mac80211 value - * and from mac80211 value to register value. - * NOTE: Logics in rt2400pci for txpower are reversed - * compared to the other rt2x00 drivers. A higher txpower - * value means that the txpower must be lowered. This is - * important when converting the value coming from the - * mac80211 stack to the rt2400 acceptable value. - */ -#define MIN_TXPOWER 31 -#define MAX_TXPOWER 62 -#define DEFAULT_TXPOWER 39 - -#define __CLAMP_TX(__txpower) \ - clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER) - -#define TXPOWER_FROM_DEV(__txpower) \ - ((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER) - -#define TXPOWER_TO_DEV(__txpower) \ - (MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER)) - -#endif /* RT2400PCI_H */ |