diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt61pci.h')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt61pci.h | 1500 |
1 files changed, 0 insertions, 1500 deletions
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h deleted file mode 100644 index 5218f678f..000000000 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ /dev/null @@ -1,1500 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/* - Module: rt61pci - Abstract: Data structures and registers for the rt61pci module. - Supported chipsets: RT2561, RT2561s, RT2661. - */ - -#ifndef RT61PCI_H -#define RT61PCI_H - -/* - * RT chip PCI IDs. - */ -#define RT2561s_PCI_ID 0x0301 -#define RT2561_PCI_ID 0x0302 -#define RT2661_PCI_ID 0x0401 - -/* - * RF chip defines. - */ -#define RF5225 0x0001 -#define RF5325 0x0002 -#define RF2527 0x0003 -#define RF2529 0x0004 - -/* - * Signal information. - * Default offset is required for RSSI <-> dBm conversion. - */ -#define DEFAULT_RSSI_OFFSET 120 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x3000 -#define CSR_REG_SIZE 0x04b0 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0100 -#define BBP_BASE 0x0000 -#define BBP_SIZE 0x0080 -#define RF_BASE 0x0004 -#define RF_SIZE 0x0010 - -/* - * Number of TX queues. - */ -#define NUM_TX_QUEUES 4 - -/* - * PCI registers. - */ - -/* - * HOST_CMD_CSR: For HOST to interrupt embedded processor - */ -#define HOST_CMD_CSR 0x0008 -#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x0000007f) -#define HOST_CMD_CSR_INTERRUPT_MCU FIELD32(0x00000080) - -/* - * MCU_CNTL_CSR - * SELECT_BANK: Select 8051 program bank. - * RESET: Enable 8051 reset state. - * READY: Ready state for 8051. - */ -#define MCU_CNTL_CSR 0x000c -#define MCU_CNTL_CSR_SELECT_BANK FIELD32(0x00000001) -#define MCU_CNTL_CSR_RESET FIELD32(0x00000002) -#define MCU_CNTL_CSR_READY FIELD32(0x00000004) - -/* - * SOFT_RESET_CSR - * FORCE_CLOCK_ON: Host force MAC clock ON - */ -#define SOFT_RESET_CSR 0x0010 -#define SOFT_RESET_CSR_FORCE_CLOCK_ON FIELD32(0x00000002) - -/* - * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register. - */ -#define MCU_INT_SOURCE_CSR 0x0014 -#define MCU_INT_SOURCE_CSR_0 FIELD32(0x00000001) -#define MCU_INT_SOURCE_CSR_1 FIELD32(0x00000002) -#define MCU_INT_SOURCE_CSR_2 FIELD32(0x00000004) -#define MCU_INT_SOURCE_CSR_3 FIELD32(0x00000008) -#define MCU_INT_SOURCE_CSR_4 FIELD32(0x00000010) -#define MCU_INT_SOURCE_CSR_5 FIELD32(0x00000020) -#define MCU_INT_SOURCE_CSR_6 FIELD32(0x00000040) -#define MCU_INT_SOURCE_CSR_7 FIELD32(0x00000080) -#define MCU_INT_SOURCE_CSR_TWAKEUP FIELD32(0x00000100) -#define MCU_INT_SOURCE_CSR_TBTT_EXPIRE FIELD32(0x00000200) - -/* - * MCU_INT_MASK_CSR: MCU interrupt source/mask register. - */ -#define MCU_INT_MASK_CSR 0x0018 -#define MCU_INT_MASK_CSR_0 FIELD32(0x00000001) -#define MCU_INT_MASK_CSR_1 FIELD32(0x00000002) -#define MCU_INT_MASK_CSR_2 FIELD32(0x00000004) -#define MCU_INT_MASK_CSR_3 FIELD32(0x00000008) -#define MCU_INT_MASK_CSR_4 FIELD32(0x00000010) -#define MCU_INT_MASK_CSR_5 FIELD32(0x00000020) -#define MCU_INT_MASK_CSR_6 FIELD32(0x00000040) -#define MCU_INT_MASK_CSR_7 FIELD32(0x00000080) -#define MCU_INT_MASK_CSR_TWAKEUP FIELD32(0x00000100) -#define MCU_INT_MASK_CSR_TBTT_EXPIRE FIELD32(0x00000200) - -/* - * PCI_USEC_CSR - */ -#define PCI_USEC_CSR 0x001c - -/* - * Security key table memory. - * 16 entries 32-byte for shared key table - * 64 entries 32-byte for pairwise key table - * 64 entries 8-byte for pairwise ta key table - */ -#define SHARED_KEY_TABLE_BASE 0x1000 -#define PAIRWISE_KEY_TABLE_BASE 0x1200 -#define PAIRWISE_TA_TABLE_BASE 0x1a00 - -#define SHARED_KEY_ENTRY(__idx) \ - ( SHARED_KEY_TABLE_BASE + \ - ((__idx) * sizeof(struct hw_key_entry)) ) -#define PAIRWISE_KEY_ENTRY(__idx) \ - ( PAIRWISE_KEY_TABLE_BASE + \ - ((__idx) * sizeof(struct hw_key_entry)) ) -#define PAIRWISE_TA_ENTRY(__idx) \ - ( PAIRWISE_TA_TABLE_BASE + \ - ((__idx) * sizeof(struct hw_pairwise_ta_entry)) ) - -struct hw_key_entry { - u8 key[16]; - u8 tx_mic[8]; - u8 rx_mic[8]; -} __packed; - -struct hw_pairwise_ta_entry { - u8 address[6]; - u8 cipher; - u8 reserved; -} __packed; - -/* - * Other on-chip shared memory space. - */ -#define HW_CIS_BASE 0x2000 -#define HW_NULL_BASE 0x2b00 - -/* - * Since NULL frame won't be that long (256 byte), - * We steal 16 tail bytes to save debugging settings. - */ -#define HW_DEBUG_SETTING_BASE 0x2bf0 - -/* - * On-chip BEACON frame space. - */ -#define HW_BEACON_BASE0 0x2c00 -#define HW_BEACON_BASE1 0x2d00 -#define HW_BEACON_BASE2 0x2e00 -#define HW_BEACON_BASE3 0x2f00 - -#define HW_BEACON_OFFSET(__index) \ - ( HW_BEACON_BASE0 + (__index * 0x0100) ) - -/* - * HOST-MCU shared memory. - */ - -/* - * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. - */ -#define H2M_MAILBOX_CSR 0x2100 -#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) -#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) -#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) -#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) - -/* - * MCU_LEDCS: LED control for MCU Mailbox. - */ -#define MCU_LEDCS_LED_MODE FIELD16(0x001f) -#define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020) -#define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040) -#define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080) -#define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100) -#define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200) -#define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400) -#define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800) -#define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000) -#define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000) -#define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000) -#define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000) - -/* - * M2H_CMD_DONE_CSR. - */ -#define M2H_CMD_DONE_CSR 0x2104 - -/* - * MCU_TXOP_ARRAY_BASE. - */ -#define MCU_TXOP_ARRAY_BASE 0x2110 - -/* - * MAC Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * MAC_CSR0: ASIC revision number. - */ -#define MAC_CSR0 0x3000 -#define MAC_CSR0_REVISION FIELD32(0x0000000f) -#define MAC_CSR0_CHIPSET FIELD32(0x000ffff0) - -/* - * MAC_CSR1: System control register. - * SOFT_RESET: Software reset bit, 1: reset, 0: normal. - * BBP_RESET: Hardware reset BBP. - * HOST_READY: Host is ready after initialization, 1: ready. - */ -#define MAC_CSR1 0x3004 -#define MAC_CSR1_SOFT_RESET FIELD32(0x00000001) -#define MAC_CSR1_BBP_RESET FIELD32(0x00000002) -#define MAC_CSR1_HOST_READY FIELD32(0x00000004) - -/* - * MAC_CSR2: STA MAC register 0. - */ -#define MAC_CSR2 0x3008 -#define MAC_CSR2_BYTE0 FIELD32(0x000000ff) -#define MAC_CSR2_BYTE1 FIELD32(0x0000ff00) -#define MAC_CSR2_BYTE2 FIELD32(0x00ff0000) -#define MAC_CSR2_BYTE3 FIELD32(0xff000000) - -/* - * MAC_CSR3: STA MAC register 1. - * UNICAST_TO_ME_MASK: - * Used to mask off bits from byte 5 of the MAC address - * to determine the UNICAST_TO_ME bit for RX frames. - * The full mask is complemented by BSS_ID_MASK: - * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK - */ -#define MAC_CSR3 0x300c -#define MAC_CSR3_BYTE4 FIELD32(0x000000ff) -#define MAC_CSR3_BYTE5 FIELD32(0x0000ff00) -#define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) - -/* - * MAC_CSR4: BSSID register 0. - */ -#define MAC_CSR4 0x3010 -#define MAC_CSR4_BYTE0 FIELD32(0x000000ff) -#define MAC_CSR4_BYTE1 FIELD32(0x0000ff00) -#define MAC_CSR4_BYTE2 FIELD32(0x00ff0000) -#define MAC_CSR4_BYTE3 FIELD32(0xff000000) - -/* - * MAC_CSR5: BSSID register 1. - * BSS_ID_MASK: - * This mask is used to mask off bits 0 and 1 of byte 5 of the - * BSSID. This will make sure that those bits will be ignored - * when determining the MY_BSS of RX frames. - * 0: 1-BSSID mode (BSS index = 0) - * 1: 2-BSSID mode (BSS index: Byte5, bit 0) - * 2: 2-BSSID mode (BSS index: byte5, bit 1) - * 3: 4-BSSID mode (BSS index: byte5, bit 0 - 1) - */ -#define MAC_CSR5 0x3014 -#define MAC_CSR5_BYTE4 FIELD32(0x000000ff) -#define MAC_CSR5_BYTE5 FIELD32(0x0000ff00) -#define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000) - -/* - * MAC_CSR6: Maximum frame length register. - */ -#define MAC_CSR6 0x3018 -#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff) - -/* - * MAC_CSR7: Reserved - */ -#define MAC_CSR7 0x301c - -/* - * MAC_CSR8: SIFS/EIFS register. - * All units are in US. - */ -#define MAC_CSR8 0x3020 -#define MAC_CSR8_SIFS FIELD32(0x000000ff) -#define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00) -#define MAC_CSR8_EIFS FIELD32(0xffff0000) - -/* - * MAC_CSR9: Back-Off control register. - * SLOT_TIME: Slot time, default is 20us for 802.11BG. - * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1). - * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1). - * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD. - */ -#define MAC_CSR9 0x3024 -#define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff) -#define MAC_CSR9_CWMIN FIELD32(0x00000f00) -#define MAC_CSR9_CWMAX FIELD32(0x0000f000) -#define MAC_CSR9_CW_SELECT FIELD32(0x00010000) - -/* - * MAC_CSR10: Power state configuration. - */ -#define MAC_CSR10 0x3028 - -/* - * MAC_CSR11: Power saving transition time register. - * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU. - * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. - * WAKEUP_LATENCY: In unit of TU. - */ -#define MAC_CSR11 0x302c -#define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff) -#define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00) -#define MAC_CSR11_AUTOWAKE FIELD32(0x00008000) -#define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000) - -/* - * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1). - * CURRENT_STATE: 0:sleep, 1:awake. - * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP. - * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake. - */ -#define MAC_CSR12 0x3030 -#define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001) -#define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002) -#define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004) -#define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008) - -/* - * MAC_CSR13: GPIO. - * MAC_CSR13_VALx: GPIO value - * MAC_CSR13_DIRx: GPIO direction: 0 = output; 1 = input - */ -#define MAC_CSR13 0x3034 -#define MAC_CSR13_VAL0 FIELD32(0x00000001) -#define MAC_CSR13_VAL1 FIELD32(0x00000002) -#define MAC_CSR13_VAL2 FIELD32(0x00000004) -#define MAC_CSR13_VAL3 FIELD32(0x00000008) -#define MAC_CSR13_VAL4 FIELD32(0x00000010) -#define MAC_CSR13_VAL5 FIELD32(0x00000020) -#define MAC_CSR13_DIR0 FIELD32(0x00000100) -#define MAC_CSR13_DIR1 FIELD32(0x00000200) -#define MAC_CSR13_DIR2 FIELD32(0x00000400) -#define MAC_CSR13_DIR3 FIELD32(0x00000800) -#define MAC_CSR13_DIR4 FIELD32(0x00001000) -#define MAC_CSR13_DIR5 FIELD32(0x00002000) - -/* - * MAC_CSR14: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON. - * SW_LED: s/w LED, 1: ON, 0: OFF. - * HW_LED_POLARITY: 0: active low, 1: active high. - */ -#define MAC_CSR14 0x3038 -#define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff) -#define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00) -#define MAC_CSR14_HW_LED FIELD32(0x00010000) -#define MAC_CSR14_SW_LED FIELD32(0x00020000) -#define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000) -#define MAC_CSR14_SW_LED2 FIELD32(0x00080000) - -/* - * MAC_CSR15: NAV control. - */ -#define MAC_CSR15 0x303c - -/* - * TXRX control registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXRX_CSR0: TX/RX configuration register. - * TSF_OFFSET: Default is 24. - * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame. - * DISABLE_RX: Disable Rx engine. - * DROP_CRC: Drop CRC error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TO_DS: Drop fram ToDs bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * DROP_MULTICAST: Drop multicast frames. - * DROP_BORADCAST: Drop broadcast frames. - * DROP_ACK_CTS: Drop received ACK and CTS. - */ -#define TXRX_CSR0 0x3040 -#define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff) -#define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00) -#define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000) -#define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000) -#define TXRX_CSR0_DROP_CRC FIELD32(0x00020000) -#define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000) -#define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000) -#define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000) -#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000) -#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000) -#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000) -#define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000) -#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000) -#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000) - -/* - * TXRX_CSR1 - */ -#define TXRX_CSR1 0x3044 -#define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR2 - */ -#define TXRX_CSR2 0x3048 -#define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR3 - */ -#define TXRX_CSR3 0x304c -#define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR4: Auto-Responder/Tx-retry register. - * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble. - * OFDM_TX_RATE_DOWN: 1:enable. - * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step. - * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M. - */ -#define TXRX_CSR4 0x3050 -#define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff) -#define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700) -#define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000) -#define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000) -#define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000) -#define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000) -#define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000) -#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000) -#define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000) -#define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000) - -/* - * TXRX_CSR5 - */ -#define TXRX_CSR5 0x3054 - -/* - * TXRX_CSR6: ACK/CTS payload consumed time - */ -#define TXRX_CSR6 0x3058 - -/* - * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. - */ -#define TXRX_CSR7 0x305c -#define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff) -#define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00) -#define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000) -#define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000) - -/* - * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. - */ -#define TXRX_CSR8 0x3060 -#define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff) -#define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00) -#define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000) -#define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000) - -/* - * TXRX_CSR9: Synchronization control register. - * BEACON_INTERVAL: In unit of 1/16 TU. - * TSF_TICKING: Enable TSF auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * BEACON_GEN: Enable beacon generator. - */ -#define TXRX_CSR9 0x3064 -#define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff) -#define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000) -#define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000) -#define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000) -#define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000) -#define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000) - -/* - * TXRX_CSR10: BEACON alignment. - */ -#define TXRX_CSR10 0x3068 - -/* - * TXRX_CSR11: AES mask. - */ -#define TXRX_CSR11 0x306c - -/* - * TXRX_CSR12: TSF low 32. - */ -#define TXRX_CSR12 0x3070 -#define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff) - -/* - * TXRX_CSR13: TSF high 32. - */ -#define TXRX_CSR13 0x3074 -#define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff) - -/* - * TXRX_CSR14: TBTT timer. - */ -#define TXRX_CSR14 0x3078 - -/* - * TXRX_CSR15: TKIP MIC priority byte "AND" mask. - */ -#define TXRX_CSR15 0x307c - -/* - * PHY control registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * PHY_CSR0: RF/PS control. - */ -#define PHY_CSR0 0x3080 -#define PHY_CSR0_PA_PE_BG FIELD32(0x00010000) -#define PHY_CSR0_PA_PE_A FIELD32(0x00020000) - -/* - * PHY_CSR1 - */ -#define PHY_CSR1 0x3084 - -/* - * PHY_CSR2: Pre-TX BBP control. - */ -#define PHY_CSR2 0x3088 - -/* - * PHY_CSR3: BBP serial control register. - * VALUE: Register value to program into BBP. - * REG_NUM: Selected BBP register. - * READ_CONTROL: 0: Write BBP, 1: Read BBP. - * BUSY: 1: ASIC is busy execute BBP programming. - */ -#define PHY_CSR3 0x308c -#define PHY_CSR3_VALUE FIELD32(0x000000ff) -#define PHY_CSR3_REGNUM FIELD32(0x00007f00) -#define PHY_CSR3_READ_CONTROL FIELD32(0x00008000) -#define PHY_CSR3_BUSY FIELD32(0x00010000) - -/* - * PHY_CSR4: RF serial control register - * VALUE: Register value (include register id) serial out to RF/IF chip. - * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22). - * IF_SELECT: 1: select IF to program, 0: select RF to program. - * PLL_LD: RF PLL_LD status. - * BUSY: 1: ASIC is busy execute RF programming. - */ -#define PHY_CSR4 0x3090 -#define PHY_CSR4_VALUE FIELD32(0x00ffffff) -#define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000) -#define PHY_CSR4_IF_SELECT FIELD32(0x20000000) -#define PHY_CSR4_PLL_LD FIELD32(0x40000000) -#define PHY_CSR4_BUSY FIELD32(0x80000000) - -/* - * PHY_CSR5: RX to TX signal switch timing control. - */ -#define PHY_CSR5 0x3094 -#define PHY_CSR5_IQ_FLIP FIELD32(0x00000004) - -/* - * PHY_CSR6: TX to RX signal timing control. - */ -#define PHY_CSR6 0x3098 -#define PHY_CSR6_IQ_FLIP FIELD32(0x00000004) - -/* - * PHY_CSR7: TX DAC switching timing control. - */ -#define PHY_CSR7 0x309c - -/* - * Security control register. - */ - -/* - * SEC_CSR0: Shared key table control. - */ -#define SEC_CSR0 0x30a0 -#define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001) -#define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002) -#define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004) -#define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008) -#define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010) -#define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020) -#define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040) -#define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080) -#define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100) -#define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200) -#define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400) -#define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800) -#define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000) -#define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000) -#define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000) -#define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000) - -/* - * SEC_CSR1: Shared key table security mode register. - */ -#define SEC_CSR1 0x30a4 -#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007) -#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070) -#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700) -#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000) -#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000) -#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000) -#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000) -#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000) - -/* - * Pairwise key table valid bitmap registers. - * SEC_CSR2: pairwise key table valid bitmap 0. - * SEC_CSR3: pairwise key table valid bitmap 1. - */ -#define SEC_CSR2 0x30a8 -#define SEC_CSR3 0x30ac - -/* - * SEC_CSR4: Pairwise key table lookup control. - */ -#define SEC_CSR4 0x30b0 -#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001) -#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002) -#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004) -#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008) - -/* - * SEC_CSR5: shared key table security mode register. - */ -#define SEC_CSR5 0x30b4 -#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007) -#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070) -#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700) -#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000) -#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000) -#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000) -#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000) -#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000) - -/* - * STA control registers. - */ - -/* - * STA_CSR0: RX PLCP error count & RX FCS error count. - */ -#define STA_CSR0 0x30c0 -#define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff) -#define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000) - -/* - * STA_CSR1: RX False CCA count & RX LONG frame count. - */ -#define STA_CSR1 0x30c4 -#define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff) -#define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000) - -/* - * STA_CSR2: TX Beacon count and RX FIFO overflow count. - */ -#define STA_CSR2 0x30c8 -#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff) -#define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000) - -/* - * STA_CSR3: TX Beacon count. - */ -#define STA_CSR3 0x30cc -#define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff) - -/* - * STA_CSR4: TX Result status register. - * VALID: 1:This register contains a valid TX result. - */ -#define STA_CSR4 0x30d0 -#define STA_CSR4_VALID FIELD32(0x00000001) -#define STA_CSR4_TX_RESULT FIELD32(0x0000000e) -#define STA_CSR4_RETRY_COUNT FIELD32(0x000000f0) -#define STA_CSR4_PID_SUBTYPE FIELD32(0x00001f00) -#define STA_CSR4_PID_TYPE FIELD32(0x0000e000) -#define STA_CSR4_TXRATE FIELD32(0x000f0000) - -/* - * QOS control registers. - */ - -/* - * QOS_CSR0: TXOP holder MAC address register. - */ -#define QOS_CSR0 0x30e0 -#define QOS_CSR0_BYTE0 FIELD32(0x000000ff) -#define QOS_CSR0_BYTE1 FIELD32(0x0000ff00) -#define QOS_CSR0_BYTE2 FIELD32(0x00ff0000) -#define QOS_CSR0_BYTE3 FIELD32(0xff000000) - -/* - * QOS_CSR1: TXOP holder MAC address register. - */ -#define QOS_CSR1 0x30e4 -#define QOS_CSR1_BYTE4 FIELD32(0x000000ff) -#define QOS_CSR1_BYTE5 FIELD32(0x0000ff00) - -/* - * QOS_CSR2: TXOP holder timeout register. - */ -#define QOS_CSR2 0x30e8 - -/* - * RX QOS-CFPOLL MAC address register. - * QOS_CSR3: RX QOS-CFPOLL MAC address 0. - * QOS_CSR4: RX QOS-CFPOLL MAC address 1. - */ -#define QOS_CSR3 0x30ec -#define QOS_CSR4 0x30f0 - -/* - * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL. - */ -#define QOS_CSR5 0x30f4 - -/* - * Host DMA registers. - */ - -/* - * AC0_BASE_CSR: AC_VO base address. - */ -#define AC0_BASE_CSR 0x3400 -#define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * AC1_BASE_CSR: AC_VI base address. - */ -#define AC1_BASE_CSR 0x3404 -#define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * AC2_BASE_CSR: AC_BE base address. - */ -#define AC2_BASE_CSR 0x3408 -#define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * AC3_BASE_CSR: AC_BK base address. - */ -#define AC3_BASE_CSR 0x340c -#define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * MGMT_BASE_CSR: MGMT ring base address. - */ -#define MGMT_BASE_CSR 0x3410 -#define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * TX_RING_CSR0: TX Ring size for AC_VO, AC_VI, AC_BE, AC_BK. - */ -#define TX_RING_CSR0 0x3418 -#define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff) -#define TX_RING_CSR0_AC1_RING_SIZE FIELD32(0x0000ff00) -#define TX_RING_CSR0_AC2_RING_SIZE FIELD32(0x00ff0000) -#define TX_RING_CSR0_AC3_RING_SIZE FIELD32(0xff000000) - -/* - * TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring - * TXD_SIZE: In unit of 32-bit. - */ -#define TX_RING_CSR1 0x341c -#define TX_RING_CSR1_MGMT_RING_SIZE FIELD32(0x000000ff) -#define TX_RING_CSR1_HCCA_RING_SIZE FIELD32(0x0000ff00) -#define TX_RING_CSR1_TXD_SIZE FIELD32(0x003f0000) - -/* - * AIFSN_CSR: AIFSN for each EDCA AC. - * AIFSN0: For AC_VO. - * AIFSN1: For AC_VI. - * AIFSN2: For AC_BE. - * AIFSN3: For AC_BK. - */ -#define AIFSN_CSR 0x3420 -#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f) -#define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0) -#define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00) -#define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000) - -/* - * CWMIN_CSR: CWmin for each EDCA AC. - * CWMIN0: For AC_VO. - * CWMIN1: For AC_VI. - * CWMIN2: For AC_BE. - * CWMIN3: For AC_BK. - */ -#define CWMIN_CSR 0x3424 -#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f) -#define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0) -#define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00) -#define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000) - -/* - * CWMAX_CSR: CWmax for each EDCA AC. - * CWMAX0: For AC_VO. - * CWMAX1: For AC_VI. - * CWMAX2: For AC_BE. - * CWMAX3: For AC_BK. - */ -#define CWMAX_CSR 0x3428 -#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f) -#define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0) -#define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00) -#define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000) - -/* - * TX_DMA_DST_CSR: TX DMA destination - * 0: TX ring0, 1: TX ring1, 2: TX ring2 3: invalid - */ -#define TX_DMA_DST_CSR 0x342c -#define TX_DMA_DST_CSR_DEST_AC0 FIELD32(0x00000003) -#define TX_DMA_DST_CSR_DEST_AC1 FIELD32(0x0000000c) -#define TX_DMA_DST_CSR_DEST_AC2 FIELD32(0x00000030) -#define TX_DMA_DST_CSR_DEST_AC3 FIELD32(0x000000c0) -#define TX_DMA_DST_CSR_DEST_MGMT FIELD32(0x00000300) - -/* - * TX_CNTL_CSR: KICK/Abort TX. - * KICK_TX_AC0: For AC_VO. - * KICK_TX_AC1: For AC_VI. - * KICK_TX_AC2: For AC_BE. - * KICK_TX_AC3: For AC_BK. - * ABORT_TX_AC0: For AC_VO. - * ABORT_TX_AC1: For AC_VI. - * ABORT_TX_AC2: For AC_BE. - * ABORT_TX_AC3: For AC_BK. - */ -#define TX_CNTL_CSR 0x3430 -#define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001) -#define TX_CNTL_CSR_KICK_TX_AC1 FIELD32(0x00000002) -#define TX_CNTL_CSR_KICK_TX_AC2 FIELD32(0x00000004) -#define TX_CNTL_CSR_KICK_TX_AC3 FIELD32(0x00000008) -#define TX_CNTL_CSR_KICK_TX_MGMT FIELD32(0x00000010) -#define TX_CNTL_CSR_ABORT_TX_AC0 FIELD32(0x00010000) -#define TX_CNTL_CSR_ABORT_TX_AC1 FIELD32(0x00020000) -#define TX_CNTL_CSR_ABORT_TX_AC2 FIELD32(0x00040000) -#define TX_CNTL_CSR_ABORT_TX_AC3 FIELD32(0x00080000) -#define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000) - -/* - * LOAD_TX_RING_CSR: Load RX desriptor - */ -#define LOAD_TX_RING_CSR 0x3434 -#define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001) -#define LOAD_TX_RING_CSR_LOAD_TXD_AC1 FIELD32(0x00000002) -#define LOAD_TX_RING_CSR_LOAD_TXD_AC2 FIELD32(0x00000004) -#define LOAD_TX_RING_CSR_LOAD_TXD_AC3 FIELD32(0x00000008) -#define LOAD_TX_RING_CSR_LOAD_TXD_MGMT FIELD32(0x00000010) - -/* - * Several read-only registers, for debugging. - */ -#define AC0_TXPTR_CSR 0x3438 -#define AC1_TXPTR_CSR 0x343c -#define AC2_TXPTR_CSR 0x3440 -#define AC3_TXPTR_CSR 0x3444 -#define MGMT_TXPTR_CSR 0x3448 - -/* - * RX_BASE_CSR - */ -#define RX_BASE_CSR 0x3450 -#define RX_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * RX_RING_CSR. - * RXD_SIZE: In unit of 32-bit. - */ -#define RX_RING_CSR 0x3454 -#define RX_RING_CSR_RING_SIZE FIELD32(0x000000ff) -#define RX_RING_CSR_RXD_SIZE FIELD32(0x00003f00) -#define RX_RING_CSR_RXD_WRITEBACK_SIZE FIELD32(0x00070000) - -/* - * RX_CNTL_CSR - */ -#define RX_CNTL_CSR 0x3458 -#define RX_CNTL_CSR_ENABLE_RX_DMA FIELD32(0x00000001) -#define RX_CNTL_CSR_LOAD_RXD FIELD32(0x00000002) - -/* - * RXPTR_CSR: Read-only, for debugging. - */ -#define RXPTR_CSR 0x345c - -/* - * PCI_CFG_CSR - */ -#define PCI_CFG_CSR 0x3460 - -/* - * BUF_FORMAT_CSR - */ -#define BUF_FORMAT_CSR 0x3464 - -/* - * INT_SOURCE_CSR: Interrupt source register. - * Write one to clear corresponding bit. - */ -#define INT_SOURCE_CSR 0x3468 -#define INT_SOURCE_CSR_TXDONE FIELD32(0x00000001) -#define INT_SOURCE_CSR_RXDONE FIELD32(0x00000002) -#define INT_SOURCE_CSR_BEACON_DONE FIELD32(0x00000004) -#define INT_SOURCE_CSR_TX_ABORT_DONE FIELD32(0x00000010) -#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00010000) -#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00020000) -#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00040000) -#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00080000) -#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00100000) -#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00200000) - -/* - * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. - * MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock. - */ -#define INT_MASK_CSR 0x346c -#define INT_MASK_CSR_TXDONE FIELD32(0x00000001) -#define INT_MASK_CSR_RXDONE FIELD32(0x00000002) -#define INT_MASK_CSR_BEACON_DONE FIELD32(0x00000004) -#define INT_MASK_CSR_TX_ABORT_DONE FIELD32(0x00000010) -#define INT_MASK_CSR_ENABLE_MITIGATION FIELD32(0x00000080) -#define INT_MASK_CSR_MITIGATION_PERIOD FIELD32(0x0000ff00) -#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00010000) -#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00020000) -#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00040000) -#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00080000) -#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00100000) -#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00200000) - -/* - * E2PROM_CSR: EEPROM control register. - * RELOAD: Write 1 to reload eeprom content. - * TYPE_93C46: 1: 93c46, 0:93c66. - * LOAD_STATUS: 1:loading, 0:done. - */ -#define E2PROM_CSR 0x3470 -#define E2PROM_CSR_RELOAD FIELD32(0x00000001) -#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000002) -#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000004) -#define E2PROM_CSR_DATA_IN FIELD32(0x00000008) -#define E2PROM_CSR_DATA_OUT FIELD32(0x00000010) -#define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020) -#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) - -/* - * AC_TXOP_CSR0: AC_VO/AC_VI TXOP register. - * AC0_TX_OP: For AC_VO, in unit of 32us. - * AC1_TX_OP: For AC_VI, in unit of 32us. - */ -#define AC_TXOP_CSR0 0x3474 -#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff) -#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000) - -/* - * AC_TXOP_CSR1: AC_BE/AC_BK TXOP register. - * AC2_TX_OP: For AC_BE, in unit of 32us. - * AC3_TX_OP: For AC_BK, in unit of 32us. - */ -#define AC_TXOP_CSR1 0x3478 -#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff) -#define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000) - -/* - * DMA_STATUS_CSR - */ -#define DMA_STATUS_CSR 0x3480 - -/* - * TEST_MODE_CSR - */ -#define TEST_MODE_CSR 0x3484 - -/* - * UART0_TX_CSR - */ -#define UART0_TX_CSR 0x3488 - -/* - * UART0_RX_CSR - */ -#define UART0_RX_CSR 0x348c - -/* - * UART0_FRAME_CSR - */ -#define UART0_FRAME_CSR 0x3490 - -/* - * UART0_BUFFER_CSR - */ -#define UART0_BUFFER_CSR 0x3494 - -/* - * IO_CNTL_CSR - * RF_PS: Set RF interface value to power save - */ -#define IO_CNTL_CSR 0x3498 -#define IO_CNTL_CSR_RF_PS FIELD32(0x00000004) - -/* - * UART_INT_SOURCE_CSR - */ -#define UART_INT_SOURCE_CSR 0x34a8 - -/* - * UART_INT_MASK_CSR - */ -#define UART_INT_MASK_CSR 0x34ac - -/* - * PBF_QUEUE_CSR - */ -#define PBF_QUEUE_CSR 0x34b0 - -/* - * Firmware DMA registers. - * Firmware DMA registers are dedicated for MCU usage - * and should not be touched by host driver. - * Therefore we skip the definition of these registers. - */ -#define FW_TX_BASE_CSR 0x34c0 -#define FW_TX_START_CSR 0x34c4 -#define FW_TX_LAST_CSR 0x34c8 -#define FW_MODE_CNTL_CSR 0x34cc -#define FW_TXPTR_CSR 0x34d0 - -/* - * 8051 firmware image. - */ -#define FIRMWARE_RT2561 "/*(DEBLOBBED)*/" -#define FIRMWARE_RT2561s "/*(DEBLOBBED)*/" -#define FIRMWARE_RT2661 "/*(DEBLOBBED)*/" -#define FIRMWARE_IMAGE_BASE 0x4000 - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R2 - */ -#define BBP_R2_BG_MODE FIELD8(0x20) - -/* - * R3 - */ -#define BBP_R3_SMART_MODE FIELD8(0x01) - -/* - * R4: RX antenna control - * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529) - */ - -/* - * ANTENNA_CONTROL semantics (guessed): - * 0x1: Software controlled antenna switching (fixed or SW diversity) - * 0x2: Hardware diversity. - */ -#define BBP_R4_RX_ANTENNA_CONTROL FIELD8(0x03) -#define BBP_R4_RX_FRAME_END FIELD8(0x20) - -/* - * R77 - */ -#define BBP_R77_RX_ANTENNA FIELD8(0x03) - -/* - * RF registers - */ - -/* - * RF 3 - */ -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * RF 4 - */ -#define RF4_FREQ_OFFSET FIELD32(0x0003f000) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antenna's. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only. - * DYN_TXAGC: Dynamic TX AGC control. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - * RF_TYPE: Rf_type of this adapter. - */ -#define EEPROM_ANTENNA 0x0010 -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040) -#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) - -/* - * EEPROM NIC config. - * ENABLE_DIVERSITY: 1:enable, 0:disable. - * EXTERNAL_LNA_BG: External LNA enable for 2.4G. - * CARDBUS_ACCEL: 0:enable, 1:disable. - * EXTERNAL_LNA_A: External LNA enable for 5G. - */ -#define EEPROM_NIC 0x0011 -#define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001) -#define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002) -#define EEPROM_NIC_RX_FIXED FIELD16(0x0004) -#define EEPROM_NIC_TX_FIXED FIELD16(0x0008) -#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010) -#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020) -#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040) - -/* - * EEPROM geography. - * GEO_A: Default geographical setting for 5GHz band - * GEO: Default geographical setting. - */ -#define EEPROM_GEOGRAPHY 0x0012 -#define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff) -#define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x0013 -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER 802.11G - */ -#define EEPROM_TXPOWER_G_START 0x0023 -#define EEPROM_TXPOWER_G_SIZE 7 -#define EEPROM_TXPOWER_G_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_G_2 FIELD16(0xff00) - -/* - * EEPROM Frequency - */ -#define EEPROM_FREQ 0x002f -#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) -#define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00) -#define EEPROM_FREQ_SEQ FIELD16(0x0300) - -/* - * EEPROM LED. - * POLARITY_RDY_G: Polarity RDY_G setting. - * POLARITY_RDY_A: Polarity RDY_A setting. - * POLARITY_ACT: Polarity ACT setting. - * POLARITY_GPIO_0: Polarity GPIO0 setting. - * POLARITY_GPIO_1: Polarity GPIO1 setting. - * POLARITY_GPIO_2: Polarity GPIO2 setting. - * POLARITY_GPIO_3: Polarity GPIO3 setting. - * POLARITY_GPIO_4: Polarity GPIO4 setting. - * LED_MODE: Led mode. - */ -#define EEPROM_LED 0x0030 -#define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001) -#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) -#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) -#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) -#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) -#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) -#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) -#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) -#define EEPROM_LED_LED_MODE FIELD16(0x1f00) - -/* - * EEPROM TXPOWER 802.11A - */ -#define EEPROM_TXPOWER_A_START 0x0031 -#define EEPROM_TXPOWER_A_SIZE 12 -#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) - -/* - * EEPROM RSSI offset 802.11BG - */ -#define EEPROM_RSSI_OFFSET_BG 0x004d -#define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff) -#define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00) - -/* - * EEPROM RSSI offset 802.11A - */ -#define EEPROM_RSSI_OFFSET_A 0x004e -#define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff) -#define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00) - -/* - * MCU mailbox commands. - */ -#define MCU_SLEEP 0x30 -#define MCU_WAKEUP 0x31 -#define MCU_LED 0x50 -#define MCU_LED_STRENGTH 0x52 - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE ( 16 * sizeof(__le32) ) -#define TXINFO_SIZE ( 6 * sizeof(__le32) ) -#define RXD_DESC_SIZE ( 16 * sizeof(__le32) ) - -/* - * TX descriptor format for TX, PRIO and Beacon Ring. - */ - -/* - * Word0 - * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used. - * KEY_TABLE: Use per-client pairwise KEY table. - * KEY_INDEX: - * Key index (0~31) to the pairwise KEY table. - * 0~3 to shared KEY table 0 (BSS0). - * 4~7 to shared KEY table 1 (BSS1). - * 8~11 to shared KEY table 2 (BSS2). - * 12~15 to shared KEY table 3 (BSS3). - * BURST: Next frame belongs to same "burst" event. - */ -#define TXD_W0_OWNER_NIC FIELD32(0x00000001) -#define TXD_W0_VALID FIELD32(0x00000002) -#define TXD_W0_MORE_FRAG FIELD32(0x00000004) -#define TXD_W0_ACK FIELD32(0x00000008) -#define TXD_W0_TIMESTAMP FIELD32(0x00000010) -#define TXD_W0_OFDM FIELD32(0x00000020) -#define TXD_W0_IFS FIELD32(0x00000040) -#define TXD_W0_RETRY_MODE FIELD32(0x00000080) -#define TXD_W0_TKIP_MIC FIELD32(0x00000100) -#define TXD_W0_KEY_TABLE FIELD32(0x00000200) -#define TXD_W0_KEY_INDEX FIELD32(0x0000fc00) -#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define TXD_W0_BURST FIELD32(0x10000000) -#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - * HOST_Q_ID: EDCA/HCCA queue ID. - * HW_SEQUENCE: MAC overwrites the frame sequence number. - * BUFFER_COUNT: Number of buffers in this TXD. - */ -#define TXD_W1_HOST_Q_ID FIELD32(0x0000000f) -#define TXD_W1_AIFSN FIELD32(0x000000f0) -#define TXD_W1_CWMIN FIELD32(0x00000f00) -#define TXD_W1_CWMAX FIELD32(0x0000f000) -#define TXD_W1_IV_OFFSET FIELD32(0x003f0000) -#define TXD_W1_PIGGY_BACK FIELD32(0x01000000) -#define TXD_W1_HW_SEQUENCE FIELD32(0x10000000) -#define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000) - -/* - * Word2: PLCP information - */ -#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) -#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) -#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) -#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) - -/* - * Word3 - */ -#define TXD_W3_IV FIELD32(0xffffffff) - -/* - * Word4 - */ -#define TXD_W4_EIV FIELD32(0xffffffff) - -/* - * Word5 - * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field). - * TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler. - * TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler. - * WAITING_DMA_DONE_INT: TXD been filled with data - * and waiting for TxDoneISR housekeeping. - */ -#define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff) -#define TXD_W5_PID_SUBTYPE FIELD32(0x00001f00) -#define TXD_W5_PID_TYPE FIELD32(0x0000e000) -#define TXD_W5_TX_POWER FIELD32(0x00ff0000) -#define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000) - -/* - * the above 24-byte is called TXINFO and will be DMAed to MAC block - * through TXFIFO. MAC block use this TXINFO to control the transmission - * behavior of this frame. - * The following fields are not used by MAC block. - * They are used by DMA block and HOST driver only. - * Once a frame has been DMA to ASIC, all the following fields are useless - * to ASIC. - */ - -/* - * Word6-10: Buffer physical address - */ -#define TXD_W6_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W7_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W8_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W9_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W10_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) - -/* - * Word11-13: Buffer length - */ -#define TXD_W11_BUFFER_LENGTH0 FIELD32(0x00000fff) -#define TXD_W11_BUFFER_LENGTH1 FIELD32(0x0fff0000) -#define TXD_W12_BUFFER_LENGTH2 FIELD32(0x00000fff) -#define TXD_W12_BUFFER_LENGTH3 FIELD32(0x0fff0000) -#define TXD_W13_BUFFER_LENGTH4 FIELD32(0x00000fff) - -/* - * Word14 - */ -#define TXD_W14_SK_BUFFER FIELD32(0xffffffff) - -/* - * Word15 - */ -#define TXD_W15_NEXT_SK_BUFFER FIELD32(0xffffffff) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key. - * KEY_INDEX: Decryption key actually used. - */ -#define RXD_W0_OWNER_NIC FIELD32(0x00000001) -#define RXD_W0_DROP FIELD32(0x00000002) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004) -#define RXD_W0_MULTICAST FIELD32(0x00000008) -#define RXD_W0_BROADCAST FIELD32(0x00000010) -#define RXD_W0_MY_BSS FIELD32(0x00000020) -#define RXD_W0_CRC_ERROR FIELD32(0x00000040) -#define RXD_W0_OFDM FIELD32(0x00000080) -#define RXD_W0_CIPHER_ERROR FIELD32(0x00000300) -#define RXD_W0_KEY_INDEX FIELD32(0x0000fc00) -#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - * SIGNAL: RX raw data rate reported by BBP. - */ -#define RXD_W1_SIGNAL FIELD32(0x000000ff) -#define RXD_W1_RSSI_AGC FIELD32(0x00001f00) -#define RXD_W1_RSSI_LNA FIELD32(0x00006000) -#define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000) - -/* - * Word2 - * IV: Received IV of originally encrypted. - */ -#define RXD_W2_IV FIELD32(0xffffffff) - -/* - * Word3 - * EIV: Received EIV of originally encrypted. - */ -#define RXD_W3_EIV FIELD32(0xffffffff) - -/* - * Word4 - * ICV: Received ICV of originally encrypted. - * NOTE: This is a guess, the official definition is "reserved" - */ -#define RXD_W4_ICV FIELD32(0xffffffff) - -/* - * the above 20-byte is called RXINFO and will be DMAed to MAC RX block - * and passed to the HOST driver. - * The following fields are for DMA block and HOST usage only. - * Can't be touched by ASIC MAC block. - */ - -/* - * Word5 - */ -#define RXD_W5_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) - -/* - * Word6-15: Reserved - */ -#define RXD_W6_RESERVED FIELD32(0xffffffff) -#define RXD_W7_RESERVED FIELD32(0xffffffff) -#define RXD_W8_RESERVED FIELD32(0xffffffff) -#define RXD_W9_RESERVED FIELD32(0xffffffff) -#define RXD_W10_RESERVED FIELD32(0xffffffff) -#define RXD_W11_RESERVED FIELD32(0xffffffff) -#define RXD_W12_RESERVED FIELD32(0xffffffff) -#define RXD_W13_RESERVED FIELD32(0xffffffff) -#define RXD_W14_RESERVED FIELD32(0xffffffff) -#define RXD_W15_RESERVED FIELD32(0xffffffff) - -/* - * Macros for converting txpower from EEPROM to mac80211 value - * and from mac80211 value to register value. - */ -#define MIN_TXPOWER 0 -#define MAX_TXPOWER 31 -#define DEFAULT_TXPOWER 24 - -#define TXPOWER_FROM_DEV(__txpower) \ - (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) - -#endif /* RT61PCI_H */ |