diff options
Diffstat (limited to 'drivers/net/wireless/ti/wl12xx')
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/Makefile | 3 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/acx.c | 53 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/acx.h | 273 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/cmd.c | 323 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/cmd.h | 132 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/conf.h | 50 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/debugfs.c | 243 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/debugfs.h | 28 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/event.c | 116 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/event.h | 111 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/main.c | 1970 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/reg.h | 556 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/scan.c | 507 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/scan.h | 140 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/wl12xx.h | 163 |
16 files changed, 4677 insertions, 0 deletions
diff --git a/drivers/net/wireless/ti/wl12xx/Kconfig b/drivers/net/wireless/ti/wl12xx/Kconfig new file mode 100644 index 000000000..c21835946 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/Kconfig @@ -0,0 +1,9 @@ +config WL12XX + tristate "TI wl12xx support" + depends on MAC80211 + select WLCORE + ---help--- + This module adds support for wireless adapters based on TI wl1271, + wl1273, wl1281 and wl1283 chipsets. This module does *not* include + support for wl1251. For wl1251 support, use the separate homonymous + driver instead. diff --git a/drivers/net/wireless/ti/wl12xx/Makefile b/drivers/net/wireless/ti/wl12xx/Makefile new file mode 100644 index 000000000..e6a24056b --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/Makefile @@ -0,0 +1,3 @@ +wl12xx-objs = main.o cmd.o acx.o debugfs.o scan.o event.o + +obj-$(CONFIG_WL12XX) += wl12xx.o diff --git a/drivers/net/wireless/ti/wl12xx/acx.c b/drivers/net/wireless/ti/wl12xx/acx.c new file mode 100644 index 000000000..bea06b2d7 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/acx.c @@ -0,0 +1,53 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008-2009 Nokia Corporation + * Copyright (C) 2011 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" +#include "../wlcore/acx.h" + +#include "acx.h" + +int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap) +{ + struct wl1271_acx_host_config_bitmap *bitmap_conf; + int ret; + + bitmap_conf = kzalloc(sizeof(*bitmap_conf), GFP_KERNEL); + if (!bitmap_conf) { + ret = -ENOMEM; + goto out; + } + + bitmap_conf->host_cfg_bitmap = cpu_to_le32(host_cfg_bitmap); + + ret = wl1271_cmd_configure(wl, ACX_HOST_IF_CFG_BITMAP, + bitmap_conf, sizeof(*bitmap_conf)); + if (ret < 0) { + wl1271_warning("wl1271 bitmap config opt failed: %d", ret); + goto out; + } + +out: + kfree(bitmap_conf); + + return ret; +} diff --git a/drivers/net/wireless/ti/wl12xx/acx.h b/drivers/net/wireless/ti/wl12xx/acx.h new file mode 100644 index 000000000..2a26868b8 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/acx.h @@ -0,0 +1,273 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 1998-2009, 2011 Texas Instruments. All rights reserved. + * Copyright (C) 2008-2010 Nokia Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_ACX_H__ +#define __WL12XX_ACX_H__ + +#include "../wlcore/wlcore.h" +#include "../wlcore/acx.h" + +#define WL12XX_ACX_ALL_EVENTS_VECTOR (WL1271_ACX_INTR_WATCHDOG | \ + WL1271_ACX_INTR_INIT_COMPLETE | \ + WL1271_ACX_INTR_EVENT_A | \ + WL1271_ACX_INTR_EVENT_B | \ + WL1271_ACX_INTR_CMD_COMPLETE | \ + WL1271_ACX_INTR_HW_AVAILABLE | \ + WL1271_ACX_INTR_DATA) + +#define WL12XX_INTR_MASK (WL1271_ACX_INTR_WATCHDOG | \ + WL1271_ACX_INTR_EVENT_A | \ + WL1271_ACX_INTR_EVENT_B | \ + WL1271_ACX_INTR_HW_AVAILABLE | \ + WL1271_ACX_INTR_DATA) + +struct wl1271_acx_host_config_bitmap { + struct acx_header header; + + __le32 host_cfg_bitmap; +} __packed; + +struct wl12xx_acx_tx_statistics { + __le32 internal_desc_overflow; +} __packed; + +struct wl12xx_acx_rx_statistics { + __le32 out_of_mem; + __le32 hdr_overflow; + __le32 hw_stuck; + __le32 dropped; + __le32 fcs_err; + __le32 xfr_hint_trig; + __le32 path_reset; + __le32 reset_counter; +} __packed; + +struct wl12xx_acx_dma_statistics { + __le32 rx_requested; + __le32 rx_errors; + __le32 tx_requested; + __le32 tx_errors; +} __packed; + +struct wl12xx_acx_isr_statistics { + /* host command complete */ + __le32 cmd_cmplt; + + /* fiqisr() */ + __le32 fiqs; + + /* (INT_STS_ND & INT_TRIG_RX_HEADER) */ + __le32 rx_headers; + + /* (INT_STS_ND & INT_TRIG_RX_CMPLT) */ + __le32 rx_completes; + + /* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */ + __le32 rx_mem_overflow; + + /* (INT_STS_ND & INT_TRIG_S_RX_RDY) */ + __le32 rx_rdys; + + /* irqisr() */ + __le32 irqs; + + /* (INT_STS_ND & INT_TRIG_TX_PROC) */ + __le32 tx_procs; + + /* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */ + __le32 decrypt_done; + + /* (INT_STS_ND & INT_TRIG_DMA0) */ + __le32 dma0_done; + + /* (INT_STS_ND & INT_TRIG_DMA1) */ + __le32 dma1_done; + + /* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */ + __le32 tx_exch_complete; + + /* (INT_STS_ND & INT_TRIG_COMMAND) */ + __le32 commands; + + /* (INT_STS_ND & INT_TRIG_RX_PROC) */ + __le32 rx_procs; + + /* (INT_STS_ND & INT_TRIG_PM_802) */ + __le32 hw_pm_mode_changes; + + /* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */ + __le32 host_acknowledges; + + /* (INT_STS_ND & INT_TRIG_PM_PCI) */ + __le32 pci_pm; + + /* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */ + __le32 wakeups; + + /* (INT_STS_ND & INT_TRIG_LOW_RSSI) */ + __le32 low_rssi; +} __packed; + +struct wl12xx_acx_wep_statistics { + /* WEP address keys configured */ + __le32 addr_key_count; + + /* default keys configured */ + __le32 default_key_count; + + __le32 reserved; + + /* number of times that WEP key not found on lookup */ + __le32 key_not_found; + + /* number of times that WEP key decryption failed */ + __le32 decrypt_fail; + + /* WEP packets decrypted */ + __le32 packets; + + /* WEP decrypt interrupts */ + __le32 interrupt; +} __packed; + +#define ACX_MISSED_BEACONS_SPREAD 10 + +struct wl12xx_acx_pwr_statistics { + /* the amount of enters into power save mode (both PD & ELP) */ + __le32 ps_enter; + + /* the amount of enters into ELP mode */ + __le32 elp_enter; + + /* the amount of missing beacon interrupts to the host */ + __le32 missing_bcns; + + /* the amount of wake on host-access times */ + __le32 wake_on_host; + + /* the amount of wake on timer-expire */ + __le32 wake_on_timer_exp; + + /* the number of packets that were transmitted with PS bit set */ + __le32 tx_with_ps; + + /* the number of packets that were transmitted with PS bit clear */ + __le32 tx_without_ps; + + /* the number of received beacons */ + __le32 rcvd_beacons; + + /* the number of entering into PowerOn (power save off) */ + __le32 power_save_off; + + /* the number of entries into power save mode */ + __le16 enable_ps; + + /* + * the number of exits from power save, not including failed PS + * transitions + */ + __le16 disable_ps; + + /* + * the number of times the TSF counter was adjusted because + * of drift + */ + __le32 fix_tsf_ps; + + /* Gives statistics about the spread continuous missed beacons. + * The 16 LSB are dedicated for the PS mode. + * The 16 MSB are dedicated for the PS mode. + * cont_miss_bcns_spread[0] - single missed beacon. + * cont_miss_bcns_spread[1] - two continuous missed beacons. + * cont_miss_bcns_spread[2] - three continuous missed beacons. + * ... + * cont_miss_bcns_spread[9] - ten and more continuous missed beacons. + */ + __le32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD]; + + /* the number of beacons in awake mode */ + __le32 rcvd_awake_beacons; +} __packed; + +struct wl12xx_acx_mic_statistics { + __le32 rx_pkts; + __le32 calc_failure; +} __packed; + +struct wl12xx_acx_aes_statistics { + __le32 encrypt_fail; + __le32 decrypt_fail; + __le32 encrypt_packets; + __le32 decrypt_packets; + __le32 encrypt_interrupt; + __le32 decrypt_interrupt; +} __packed; + +struct wl12xx_acx_event_statistics { + __le32 heart_beat; + __le32 calibration; + __le32 rx_mismatch; + __le32 rx_mem_empty; + __le32 rx_pool; + __le32 oom_late; + __le32 phy_transmit_error; + __le32 tx_stuck; +} __packed; + +struct wl12xx_acx_ps_statistics { + __le32 pspoll_timeouts; + __le32 upsd_timeouts; + __le32 upsd_max_sptime; + __le32 upsd_max_apturn; + __le32 pspoll_max_apturn; + __le32 pspoll_utilization; + __le32 upsd_utilization; +} __packed; + +struct wl12xx_acx_rxpipe_statistics { + __le32 rx_prep_beacon_drop; + __le32 descr_host_int_trig_rx_data; + __le32 beacon_buffer_thres_host_int_trig_rx_data; + __le32 missed_beacon_host_int_trig_rx_data; + __le32 tx_xfr_host_int_trig_rx_data; +} __packed; + +struct wl12xx_acx_statistics { + struct acx_header header; + + struct wl12xx_acx_tx_statistics tx; + struct wl12xx_acx_rx_statistics rx; + struct wl12xx_acx_dma_statistics dma; + struct wl12xx_acx_isr_statistics isr; + struct wl12xx_acx_wep_statistics wep; + struct wl12xx_acx_pwr_statistics pwr; + struct wl12xx_acx_aes_statistics aes; + struct wl12xx_acx_mic_statistics mic; + struct wl12xx_acx_event_statistics event; + struct wl12xx_acx_ps_statistics ps; + struct wl12xx_acx_rxpipe_statistics rxpipe; +} __packed; + +int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap); + +#endif /* __WL12XX_ACX_H__ */ diff --git a/drivers/net/wireless/ti/wl12xx/cmd.c b/drivers/net/wireless/ti/wl12xx/cmd.c new file mode 100644 index 000000000..7485dbae8 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/cmd.c @@ -0,0 +1,323 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2009-2010 Nokia Corporation + * Copyright (C) 2011 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" + +#include "wl12xx.h" +#include "cmd.h" + +int wl1271_cmd_ext_radio_parms(struct wl1271 *wl) +{ + struct wl1271_ext_radio_parms_cmd *ext_radio_parms; + struct wl12xx_priv *priv = wl->priv; + struct wl12xx_conf_rf *rf = &priv->conf.rf; + int ret; + + if (!wl->nvs) + return -ENODEV; + + ext_radio_parms = kzalloc(sizeof(*ext_radio_parms), GFP_KERNEL); + if (!ext_radio_parms) + return -ENOMEM; + + ext_radio_parms->test.id = TEST_CMD_INI_FILE_RF_EXTENDED_PARAM; + + memcpy(ext_radio_parms->tx_per_channel_power_compensation_2, + rf->tx_per_channel_power_compensation_2, + CONF_TX_PWR_COMPENSATION_LEN_2); + memcpy(ext_radio_parms->tx_per_channel_power_compensation_5, + rf->tx_per_channel_power_compensation_5, + CONF_TX_PWR_COMPENSATION_LEN_5); + + wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_EXT_RADIO_PARAM: ", + ext_radio_parms, sizeof(*ext_radio_parms)); + + ret = wl1271_cmd_test(wl, ext_radio_parms, sizeof(*ext_radio_parms), 0); + if (ret < 0) + wl1271_warning("TEST_CMD_INI_FILE_RF_EXTENDED_PARAM failed"); + + kfree(ext_radio_parms); + return ret; +} + +int wl1271_cmd_general_parms(struct wl1271 *wl) +{ + struct wl1271_general_parms_cmd *gen_parms; + struct wl1271_ini_general_params *gp = + &((struct wl1271_nvs_file *)wl->nvs)->general_params; + struct wl12xx_priv *priv = wl->priv; + bool answer = false; + int ret; + + if (!wl->nvs) + return -ENODEV; + + if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) { + wl1271_warning("FEM index from INI out of bounds"); + return -EINVAL; + } + + gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL); + if (!gen_parms) + return -ENOMEM; + + gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM; + + memcpy(&gen_parms->general_params, gp, sizeof(*gp)); + + /* If we started in PLT FEM_DETECT mode, force auto detect */ + if (wl->plt_mode == PLT_FEM_DETECT) + gen_parms->general_params.tx_bip_fem_auto_detect = true; + + if (gen_parms->general_params.tx_bip_fem_auto_detect) + answer = true; + + /* Override the REF CLK from the NVS with the one from platform data */ + gen_parms->general_params.ref_clock = priv->ref_clock; + + ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer); + if (ret < 0) { + wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed"); + goto out; + } + + gp->tx_bip_fem_manufacturer = + gen_parms->general_params.tx_bip_fem_manufacturer; + + if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) { + wl1271_warning("FEM index from FW out of bounds"); + ret = -EINVAL; + goto out; + } + + /* If we are in calibrator based fem auto detect - save fem nr */ + if (wl->plt_mode == PLT_FEM_DETECT) + wl->fem_manuf = gp->tx_bip_fem_manufacturer; + + wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n", + answer == false ? + "manual" : + wl->plt_mode == PLT_FEM_DETECT ? + "calibrator_fem_detect" : + "auto", + gp->tx_bip_fem_manufacturer); + +out: + kfree(gen_parms); + return ret; +} + +int wl128x_cmd_general_parms(struct wl1271 *wl) +{ + struct wl128x_general_parms_cmd *gen_parms; + struct wl128x_ini_general_params *gp = + &((struct wl128x_nvs_file *)wl->nvs)->general_params; + struct wl12xx_priv *priv = wl->priv; + bool answer = false; + int ret; + + if (!wl->nvs) + return -ENODEV; + + if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) { + wl1271_warning("FEM index from ini out of bounds"); + return -EINVAL; + } + + gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL); + if (!gen_parms) + return -ENOMEM; + + gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM; + + memcpy(&gen_parms->general_params, gp, sizeof(*gp)); + + /* If we started in PLT FEM_DETECT mode, force auto detect */ + if (wl->plt_mode == PLT_FEM_DETECT) + gen_parms->general_params.tx_bip_fem_auto_detect = true; + + if (gen_parms->general_params.tx_bip_fem_auto_detect) + answer = true; + + /* Replace REF and TCXO CLKs with the ones from platform data */ + gen_parms->general_params.ref_clock = priv->ref_clock; + gen_parms->general_params.tcxo_ref_clock = priv->tcxo_clock; + + ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer); + if (ret < 0) { + wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed"); + goto out; + } + + gp->tx_bip_fem_manufacturer = + gen_parms->general_params.tx_bip_fem_manufacturer; + + if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) { + wl1271_warning("FEM index from FW out of bounds"); + ret = -EINVAL; + goto out; + } + + /* If we are in calibrator based fem auto detect - save fem nr */ + if (wl->plt_mode == PLT_FEM_DETECT) + wl->fem_manuf = gp->tx_bip_fem_manufacturer; + + wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n", + answer == false ? + "manual" : + wl->plt_mode == PLT_FEM_DETECT ? + "calibrator_fem_detect" : + "auto", + gp->tx_bip_fem_manufacturer); + +out: + kfree(gen_parms); + return ret; +} + +int wl1271_cmd_radio_parms(struct wl1271 *wl) +{ + struct wl1271_nvs_file *nvs = (struct wl1271_nvs_file *)wl->nvs; + struct wl1271_radio_parms_cmd *radio_parms; + struct wl1271_ini_general_params *gp = &nvs->general_params; + int ret, fem_idx; + + if (!wl->nvs) + return -ENODEV; + + radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL); + if (!radio_parms) + return -ENOMEM; + + radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM; + + fem_idx = WL12XX_FEM_TO_NVS_ENTRY(gp->tx_bip_fem_manufacturer); + + /* 2.4GHz parameters */ + memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2, + sizeof(struct wl1271_ini_band_params_2)); + memcpy(&radio_parms->dyn_params_2, + &nvs->dyn_radio_params_2[fem_idx].params, + sizeof(struct wl1271_ini_fem_params_2)); + + /* 5GHz parameters */ + memcpy(&radio_parms->static_params_5, + &nvs->stat_radio_params_5, + sizeof(struct wl1271_ini_band_params_5)); + memcpy(&radio_parms->dyn_params_5, + &nvs->dyn_radio_params_5[fem_idx].params, + sizeof(struct wl1271_ini_fem_params_5)); + + wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ", + radio_parms, sizeof(*radio_parms)); + + ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0); + if (ret < 0) + wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed"); + + kfree(radio_parms); + return ret; +} + +int wl128x_cmd_radio_parms(struct wl1271 *wl) +{ + struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs; + struct wl128x_radio_parms_cmd *radio_parms; + struct wl128x_ini_general_params *gp = &nvs->general_params; + int ret, fem_idx; + + if (!wl->nvs) + return -ENODEV; + + radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL); + if (!radio_parms) + return -ENOMEM; + + radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM; + + fem_idx = WL12XX_FEM_TO_NVS_ENTRY(gp->tx_bip_fem_manufacturer); + + /* 2.4GHz parameters */ + memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2, + sizeof(struct wl128x_ini_band_params_2)); + memcpy(&radio_parms->dyn_params_2, + &nvs->dyn_radio_params_2[fem_idx].params, + sizeof(struct wl128x_ini_fem_params_2)); + + /* 5GHz parameters */ + memcpy(&radio_parms->static_params_5, + &nvs->stat_radio_params_5, + sizeof(struct wl128x_ini_band_params_5)); + memcpy(&radio_parms->dyn_params_5, + &nvs->dyn_radio_params_5[fem_idx].params, + sizeof(struct wl128x_ini_fem_params_5)); + + radio_parms->fem_vendor_and_options = nvs->fem_vendor_and_options; + + wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ", + radio_parms, sizeof(*radio_parms)); + + ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0); + if (ret < 0) + wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed"); + + kfree(radio_parms); + return ret; +} + +int wl12xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch) +{ + struct wl12xx_cmd_channel_switch *cmd; + int ret; + + wl1271_debug(DEBUG_ACX, "cmd channel switch"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + cmd->channel = ch_switch->chandef.chan->hw_value; + cmd->switch_time = ch_switch->count; + cmd->stop_tx = ch_switch->block_tx; + + /* FIXME: control from mac80211 in the future */ + /* Enable TX on the target channel */ + cmd->post_switch_tx_disable = 0; + + ret = wl1271_cmd_send(wl, CMD_CHANNEL_SWITCH, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send channel switch command"); + goto out_free; + } + +out_free: + kfree(cmd); + +out: + return ret; +} diff --git a/drivers/net/wireless/ti/wl12xx/cmd.h b/drivers/net/wireless/ti/wl12xx/cmd.h new file mode 100644 index 000000000..32cbad54e --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/cmd.h @@ -0,0 +1,132 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 1998-2009, 2011 Texas Instruments. All rights reserved. + * Copyright (C) 2009 Nokia Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_CMD_H__ +#define __WL12XX_CMD_H__ + +#include "conf.h" + +#define TEST_CMD_INI_FILE_RADIO_PARAM 0x19 +#define TEST_CMD_INI_FILE_GENERAL_PARAM 0x1E + +struct wl1271_general_parms_cmd { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + struct wl1271_ini_general_params general_params; + + u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM]; + u8 sr_sen_n_p; + u8 sr_sen_n_p_gain; + u8 sr_sen_nrn; + u8 sr_sen_prn; + u8 padding[3]; +} __packed; + +struct wl128x_general_parms_cmd { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + struct wl128x_ini_general_params general_params; + + u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM]; + u8 sr_sen_n_p; + u8 sr_sen_n_p_gain; + u8 sr_sen_nrn; + u8 sr_sen_prn; + u8 padding[3]; +} __packed; + +struct wl1271_radio_parms_cmd { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + /* Static radio parameters */ + struct wl1271_ini_band_params_2 static_params_2; + struct wl1271_ini_band_params_5 static_params_5; + + /* Dynamic radio parameters */ + struct wl1271_ini_fem_params_2 dyn_params_2; + u8 padding2; + struct wl1271_ini_fem_params_5 dyn_params_5; + u8 padding3[2]; +} __packed; + +struct wl128x_radio_parms_cmd { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + /* Static radio parameters */ + struct wl128x_ini_band_params_2 static_params_2; + struct wl128x_ini_band_params_5 static_params_5; + + u8 fem_vendor_and_options; + + /* Dynamic radio parameters */ + struct wl128x_ini_fem_params_2 dyn_params_2; + u8 padding2; + struct wl128x_ini_fem_params_5 dyn_params_5; +} __packed; + +#define TEST_CMD_INI_FILE_RF_EXTENDED_PARAM 0x26 + +struct wl1271_ext_radio_parms_cmd { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2]; + u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5]; + u8 padding[3]; +} __packed; + +struct wl12xx_cmd_channel_switch { + struct wl1271_cmd_header header; + + u8 role_id; + + /* The new serving channel */ + u8 channel; + /* Relative time of the serving channel switch in TBTT units */ + u8 switch_time; + /* Stop the role TX, should expect it after radar detection */ + u8 stop_tx; + /* The target channel tx status 1-stopped 0-open*/ + u8 post_switch_tx_disable; + + u8 padding[3]; +} __packed; + +int wl1271_cmd_general_parms(struct wl1271 *wl); +int wl128x_cmd_general_parms(struct wl1271 *wl); +int wl1271_cmd_radio_parms(struct wl1271 *wl); +int wl128x_cmd_radio_parms(struct wl1271 *wl); +int wl1271_cmd_ext_radio_parms(struct wl1271 *wl); +int wl12xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch); + +#endif /* __WL12XX_CMD_H__ */ diff --git a/drivers/net/wireless/ti/wl12xx/conf.h b/drivers/net/wireless/ti/wl12xx/conf.h new file mode 100644 index 000000000..75e29897a --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/conf.h @@ -0,0 +1,50 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2011 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_CONF_H__ +#define __WL12XX_CONF_H__ + +/* these are number of channels on the band divided by two, rounded up */ +#define CONF_TX_PWR_COMPENSATION_LEN_2 7 +#define CONF_TX_PWR_COMPENSATION_LEN_5 18 + +struct wl12xx_conf_rf { + /* + * Per channel power compensation for 2.4GHz + * + * Range: s8 + */ + u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2]; + + /* + * Per channel power compensation for 5GHz + * + * Range: s8 + */ + u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5]; +}; + +struct wl12xx_priv_conf { + struct wl12xx_conf_rf rf; + struct conf_memory_settings mem_wl127x; +}; + +#endif /* __WL12XX_CONF_H__ */ diff --git a/drivers/net/wireless/ti/wl12xx/debugfs.c b/drivers/net/wireless/ti/wl12xx/debugfs.c new file mode 100644 index 000000000..0521cbf85 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/debugfs.c @@ -0,0 +1,243 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2011-2012 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "../wlcore/debugfs.h" +#include "../wlcore/wlcore.h" + +#include "wl12xx.h" +#include "acx.h" +#include "debugfs.h" + +#define WL12XX_DEBUGFS_FWSTATS_FILE(a, b, c) \ + DEBUGFS_FWSTATS_FILE(a, b, c, wl12xx_acx_statistics) + +WL12XX_DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, "%u"); + +WL12XX_DEBUGFS_FWSTATS_FILE(rx, out_of_mem, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(rx, hw_stuck, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(rx, dropped, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(rx, fcs_err, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(rx, path_reset, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(rx, reset_counter, "%u"); + +WL12XX_DEBUGFS_FWSTATS_FILE(dma, rx_requested, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(dma, rx_errors, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(dma, tx_requested, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(dma, tx_errors, "%u"); + +WL12XX_DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, fiqs, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, rx_headers, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, rx_rdys, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, irqs, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, tx_procs, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, decrypt_done, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, dma0_done, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, dma1_done, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, commands, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, rx_procs, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, pci_pm, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, wakeups, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(isr, low_rssi, "%u"); + +WL12XX_DEBUGFS_FWSTATS_FILE(wep, addr_key_count, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(wep, default_key_count, "%u"); +/* skipping wep.reserved */ +WL12XX_DEBUGFS_FWSTATS_FILE(wep, key_not_found, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(wep, packets, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(wep, interrupt, "%u"); + +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, ps_enter, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, elp_enter, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, power_save_off, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, enable_ps, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, disable_ps, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, "%u"); +/* skipping cont_miss_bcns_spread for now */ +WL12XX_DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, "%u"); + +WL12XX_DEBUGFS_FWSTATS_FILE(mic, rx_pkts, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(mic, calc_failure, "%u"); + +WL12XX_DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, "%u"); + +WL12XX_DEBUGFS_FWSTATS_FILE(event, heart_beat, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(event, calibration, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(event, rx_mismatch, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(event, rx_pool, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(event, oom_late, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(event, tx_stuck, "%u"); + +WL12XX_DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, "%u"); + +WL12XX_DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data, + "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, "%u"); +WL12XX_DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, "%u"); + +int wl12xx_debugfs_add_files(struct wl1271 *wl, + struct dentry *rootdir) +{ + int ret = 0; + struct dentry *entry, *stats, *moddir; + + moddir = debugfs_create_dir(KBUILD_MODNAME, rootdir); + if (!moddir || IS_ERR(moddir)) { + entry = moddir; + goto err; + } + + stats = debugfs_create_dir("fw_stats", moddir); + if (!stats || IS_ERR(stats)) { + entry = stats; + goto err; + } + + DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow); + + DEBUGFS_FWSTATS_ADD(rx, out_of_mem); + DEBUGFS_FWSTATS_ADD(rx, hdr_overflow); + DEBUGFS_FWSTATS_ADD(rx, hw_stuck); + DEBUGFS_FWSTATS_ADD(rx, dropped); + DEBUGFS_FWSTATS_ADD(rx, fcs_err); + DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig); + DEBUGFS_FWSTATS_ADD(rx, path_reset); + DEBUGFS_FWSTATS_ADD(rx, reset_counter); + + DEBUGFS_FWSTATS_ADD(dma, rx_requested); + DEBUGFS_FWSTATS_ADD(dma, rx_errors); + DEBUGFS_FWSTATS_ADD(dma, tx_requested); + DEBUGFS_FWSTATS_ADD(dma, tx_errors); + + DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt); + DEBUGFS_FWSTATS_ADD(isr, fiqs); + DEBUGFS_FWSTATS_ADD(isr, rx_headers); + DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow); + DEBUGFS_FWSTATS_ADD(isr, rx_rdys); + DEBUGFS_FWSTATS_ADD(isr, irqs); + DEBUGFS_FWSTATS_ADD(isr, tx_procs); + DEBUGFS_FWSTATS_ADD(isr, decrypt_done); + DEBUGFS_FWSTATS_ADD(isr, dma0_done); + DEBUGFS_FWSTATS_ADD(isr, dma1_done); + DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete); + DEBUGFS_FWSTATS_ADD(isr, commands); + DEBUGFS_FWSTATS_ADD(isr, rx_procs); + DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes); + DEBUGFS_FWSTATS_ADD(isr, host_acknowledges); + DEBUGFS_FWSTATS_ADD(isr, pci_pm); + DEBUGFS_FWSTATS_ADD(isr, wakeups); + DEBUGFS_FWSTATS_ADD(isr, low_rssi); + + DEBUGFS_FWSTATS_ADD(wep, addr_key_count); + DEBUGFS_FWSTATS_ADD(wep, default_key_count); + /* skipping wep.reserved */ + DEBUGFS_FWSTATS_ADD(wep, key_not_found); + DEBUGFS_FWSTATS_ADD(wep, decrypt_fail); + DEBUGFS_FWSTATS_ADD(wep, packets); + DEBUGFS_FWSTATS_ADD(wep, interrupt); + + DEBUGFS_FWSTATS_ADD(pwr, ps_enter); + DEBUGFS_FWSTATS_ADD(pwr, elp_enter); + DEBUGFS_FWSTATS_ADD(pwr, missing_bcns); + DEBUGFS_FWSTATS_ADD(pwr, wake_on_host); + DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp); + DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps); + DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps); + DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons); + DEBUGFS_FWSTATS_ADD(pwr, power_save_off); + DEBUGFS_FWSTATS_ADD(pwr, enable_ps); + DEBUGFS_FWSTATS_ADD(pwr, disable_ps); + DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps); + /* skipping cont_miss_bcns_spread for now */ + DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons); + + DEBUGFS_FWSTATS_ADD(mic, rx_pkts); + DEBUGFS_FWSTATS_ADD(mic, calc_failure); + + DEBUGFS_FWSTATS_ADD(aes, encrypt_fail); + DEBUGFS_FWSTATS_ADD(aes, decrypt_fail); + DEBUGFS_FWSTATS_ADD(aes, encrypt_packets); + DEBUGFS_FWSTATS_ADD(aes, decrypt_packets); + DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt); + DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt); + + DEBUGFS_FWSTATS_ADD(event, heart_beat); + DEBUGFS_FWSTATS_ADD(event, calibration); + DEBUGFS_FWSTATS_ADD(event, rx_mismatch); + DEBUGFS_FWSTATS_ADD(event, rx_mem_empty); + DEBUGFS_FWSTATS_ADD(event, rx_pool); + DEBUGFS_FWSTATS_ADD(event, oom_late); + DEBUGFS_FWSTATS_ADD(event, phy_transmit_error); + DEBUGFS_FWSTATS_ADD(event, tx_stuck); + + DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts); + DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts); + DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime); + DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn); + DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn); + DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization); + DEBUGFS_FWSTATS_ADD(ps, upsd_utilization); + + DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop); + DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data); + DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data); + DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data); + DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data); + + return 0; + +err: + if (IS_ERR(entry)) + ret = PTR_ERR(entry); + else + ret = -ENOMEM; + + return ret; +} diff --git a/drivers/net/wireless/ti/wl12xx/debugfs.h b/drivers/net/wireless/ti/wl12xx/debugfs.h new file mode 100644 index 000000000..96898e291 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/debugfs.h @@ -0,0 +1,28 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_DEBUGFS_H__ +#define __WL12XX_DEBUGFS_H__ + +int wl12xx_debugfs_add_files(struct wl1271 *wl, + struct dentry *rootdir); + +#endif /* __WL12XX_DEBUGFS_H__ */ diff --git a/drivers/net/wireless/ti/wl12xx/event.c b/drivers/net/wireless/ti/wl12xx/event.c new file mode 100644 index 000000000..6ac0ed751 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/event.c @@ -0,0 +1,116 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "event.h" +#include "scan.h" +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" + +int wl12xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout) +{ + u32 local_event; + + switch (event) { + case WLCORE_EVENT_ROLE_STOP_COMPLETE: + local_event = ROLE_STOP_COMPLETE_EVENT_ID; + break; + + case WLCORE_EVENT_PEER_REMOVE_COMPLETE: + local_event = PEER_REMOVE_COMPLETE_EVENT_ID; + break; + + default: + /* event not implemented */ + return 0; + } + return wlcore_cmd_wait_for_event_or_timeout(wl, local_event, timeout); +} + +int wl12xx_process_mailbox_events(struct wl1271 *wl) +{ + struct wl12xx_event_mailbox *mbox = wl->mbox; + u32 vector; + + + vector = le32_to_cpu(mbox->events_vector); + vector &= ~(le32_to_cpu(mbox->events_mask)); + + wl1271_debug(DEBUG_EVENT, "MBOX vector: 0x%x", vector); + + if (vector & SCAN_COMPLETE_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, "status: 0x%x", + mbox->scheduled_scan_status); + + if (wl->scan_wlvif) + wl12xx_scan_completed(wl, wl->scan_wlvif); + } + + if (vector & PERIODIC_SCAN_REPORT_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, + "PERIODIC_SCAN_REPORT_EVENT (status 0x%0x)", + mbox->scheduled_scan_status); + + wlcore_scan_sched_scan_results(wl); + } + + if (vector & PERIODIC_SCAN_COMPLETE_EVENT_ID) + wlcore_event_sched_scan_completed(wl, + mbox->scheduled_scan_status); + if (vector & SOFT_GEMINI_SENSE_EVENT_ID) + wlcore_event_soft_gemini_sense(wl, + mbox->soft_gemini_sense_info); + + if (vector & BSS_LOSE_EVENT_ID) + wlcore_event_beacon_loss(wl, 0xff); + + if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) + wlcore_event_rssi_trigger(wl, mbox->rssi_snr_trigger_metric); + + if (vector & BA_SESSION_RX_CONSTRAINT_EVENT_ID) + wlcore_event_ba_rx_constraint(wl, + BIT(mbox->role_id), + mbox->rx_ba_allowed); + + if (vector & CHANNEL_SWITCH_COMPLETE_EVENT_ID) + wlcore_event_channel_switch(wl, 0xff, + mbox->channel_switch_status); + + if (vector & DUMMY_PACKET_EVENT_ID) + wlcore_event_dummy_packet(wl); + + /* + * "TX retries exceeded" has a different meaning according to mode. + * In AP mode the offending station is disconnected. + */ + if (vector & MAX_TX_RETRY_EVENT_ID) + wlcore_event_max_tx_failure(wl, + le16_to_cpu(mbox->sta_tx_retry_exceeded)); + + if (vector & INACTIVE_STA_EVENT_ID) + wlcore_event_inactive_sta(wl, + le16_to_cpu(mbox->sta_aging_status)); + + if (vector & REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID) + wlcore_event_roc_complete(wl); + + return 0; +} diff --git a/drivers/net/wireless/ti/wl12xx/event.h b/drivers/net/wireless/ti/wl12xx/event.h new file mode 100644 index 000000000..a5cc3fcd9 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/event.h @@ -0,0 +1,111 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_EVENT_H__ +#define __WL12XX_EVENT_H__ + +#include "../wlcore/wlcore.h" + +enum { + MEASUREMENT_START_EVENT_ID = BIT(8), + MEASUREMENT_COMPLETE_EVENT_ID = BIT(9), + SCAN_COMPLETE_EVENT_ID = BIT(10), + WFD_DISCOVERY_COMPLETE_EVENT_ID = BIT(11), + AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(12), + RESERVED1 = BIT(13), + PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(14), + ROLE_STOP_COMPLETE_EVENT_ID = BIT(15), + RADAR_DETECTED_EVENT_ID = BIT(16), + CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(17), + BSS_LOSE_EVENT_ID = BIT(18), + REGAINED_BSS_EVENT_ID = BIT(19), + MAX_TX_RETRY_EVENT_ID = BIT(20), + DUMMY_PACKET_EVENT_ID = BIT(21), + SOFT_GEMINI_SENSE_EVENT_ID = BIT(22), + CHANGE_AUTO_MODE_TIMEOUT_EVENT_ID = BIT(23), + SOFT_GEMINI_AVALANCHE_EVENT_ID = BIT(24), + PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(25), + INACTIVE_STA_EVENT_ID = BIT(26), + PEER_REMOVE_COMPLETE_EVENT_ID = BIT(27), + PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(28), + PERIODIC_SCAN_REPORT_EVENT_ID = BIT(29), + BA_SESSION_RX_CONSTRAINT_EVENT_ID = BIT(30), + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID = BIT(31), +}; + +struct wl12xx_event_mailbox { + __le32 events_vector; + __le32 events_mask; + __le32 reserved_1; + __le32 reserved_2; + + u8 number_of_scan_results; + u8 scan_tag; + u8 completed_scan_status; + u8 reserved_3; + + u8 soft_gemini_sense_info; + u8 soft_gemini_protective_info; + s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS]; + u8 change_auto_mode_timeout; + u8 scheduled_scan_status; + u8 reserved4; + /* tuned channel (roc) */ + u8 roc_channel; + + __le16 hlid_removed_bitmap; + + /* bitmap of aged stations (by HLID) */ + __le16 sta_aging_status; + + /* bitmap of stations (by HLID) which exceeded max tx retries */ + __le16 sta_tx_retry_exceeded; + + /* discovery completed results */ + u8 discovery_tag; + u8 number_of_preq_results; + u8 number_of_prsp_results; + u8 reserved_5; + + /* rx ba constraint */ + u8 role_id; /* 0xFF means any role. */ + u8 rx_ba_allowed; + u8 reserved_6[2]; + + /* Channel switch results */ + + u8 channel_switch_role_id; + u8 channel_switch_status; + u8 reserved_7[2]; + + u8 ps_poll_delivery_failure_role_ids; + u8 stopped_role_ids; + u8 started_role_ids; + + u8 reserved_8[9]; +} __packed; + +int wl12xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event, + bool *timeout); +int wl12xx_process_mailbox_events(struct wl1271 *wl); + +#endif + diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c new file mode 100644 index 000000000..c9da828a3 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -0,0 +1,1970 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2010 Nokia Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <linux/err.h> + +#include "../wlcore/wlcore.h" +#include "../wlcore/debug.h" +#include "../wlcore/io.h" +#include "../wlcore/acx.h" +#include "../wlcore/tx.h" +#include "../wlcore/rx.h" +#include "../wlcore/boot.h" + +#include "wl12xx.h" +#include "reg.h" +#include "cmd.h" +#include "acx.h" +#include "scan.h" +#include "event.h" +#include "debugfs.h" + +static char *fref_param; +static char *tcxo_param; + +static struct wlcore_conf wl12xx_conf = { + .sg = { + .params = { + [CONF_SG_ACL_BT_MASTER_MIN_BR] = 10, + [CONF_SG_ACL_BT_MASTER_MAX_BR] = 180, + [CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10, + [CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180, + [CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10, + [CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80, + [CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10, + [CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80, + [CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8, + [CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8, + [CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20, + [CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20, + [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20, + [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35, + [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16, + [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35, + [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32, + [CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50, + [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28, + [CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50, + [CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10, + [CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20, + [CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75, + [CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15, + [CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27, + [CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17, + /* active scan params */ + [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170, + [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50, + [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100, + /* passive scan params */ + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800, + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200, + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200, + /* passive scan in dual antenna params */ + [CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0, + [CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0, + [CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0, + /* general params */ + [CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1, + [CONF_SG_ANTENNA_CONFIGURATION] = 0, + [CONF_SG_BEACON_MISS_PERCENT] = 60, + [CONF_SG_DHCP_TIME] = 5000, + [CONF_SG_RXT] = 1200, + [CONF_SG_TXT] = 1000, + [CONF_SG_ADAPTIVE_RXT_TXT] = 1, + [CONF_SG_GENERAL_USAGE_BIT_MAP] = 3, + [CONF_SG_HV3_MAX_SERVED] = 6, + [CONF_SG_PS_POLL_TIMEOUT] = 10, + [CONF_SG_UPSD_TIMEOUT] = 10, + [CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2, + [CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5, + [CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30, + /* AP params */ + [CONF_AP_BEACON_MISS_TX] = 3, + [CONF_AP_RX_WINDOW_AFTER_BEACON] = 10, + [CONF_AP_BEACON_WINDOW_INTERVAL] = 2, + [CONF_AP_CONNECTION_PROTECTION_TIME] = 0, + [CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25, + [CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25, + /* CTS Diluting params */ + [CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0, + [CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0, + }, + .state = CONF_SG_PROTECTIVE, + }, + .rx = { + .rx_msdu_life_time = 512000, + .packet_detection_threshold = 0, + .ps_poll_timeout = 15, + .upsd_timeout = 15, + .rts_threshold = IEEE80211_MAX_RTS_THRESHOLD, + .rx_cca_threshold = 0, + .irq_blk_threshold = 0xFFFF, + .irq_pkt_threshold = 0, + .irq_timeout = 600, + .queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY, + }, + .tx = { + .tx_energy_detection = 0, + .sta_rc_conf = { + .enabled_rates = 0, + .short_retry_limit = 10, + .long_retry_limit = 10, + .aflags = 0, + }, + .ac_conf_count = 4, + .ac_conf = { + [CONF_TX_AC_BE] = { + .ac = CONF_TX_AC_BE, + .cw_min = 15, + .cw_max = 63, + .aifsn = 3, + .tx_op_limit = 0, + }, + [CONF_TX_AC_BK] = { + .ac = CONF_TX_AC_BK, + .cw_min = 15, + .cw_max = 63, + .aifsn = 7, + .tx_op_limit = 0, + }, + [CONF_TX_AC_VI] = { + .ac = CONF_TX_AC_VI, + .cw_min = 15, + .cw_max = 63, + .aifsn = CONF_TX_AIFS_PIFS, + .tx_op_limit = 3008, + }, + [CONF_TX_AC_VO] = { + .ac = CONF_TX_AC_VO, + .cw_min = 15, + .cw_max = 63, + .aifsn = CONF_TX_AIFS_PIFS, + .tx_op_limit = 1504, + }, + }, + .max_tx_retries = 100, + .ap_aging_period = 300, + .tid_conf_count = 4, + .tid_conf = { + [CONF_TX_AC_BE] = { + .queue_id = CONF_TX_AC_BE, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_BE, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_BK] = { + .queue_id = CONF_TX_AC_BK, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_BK, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_VI] = { + .queue_id = CONF_TX_AC_VI, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_VI, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_VO] = { + .queue_id = CONF_TX_AC_VO, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_VO, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + }, + .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD, + .tx_compl_timeout = 700, + .tx_compl_threshold = 4, + .basic_rate = CONF_HW_BIT_RATE_1MBPS, + .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS, + .tmpl_short_retry_limit = 10, + .tmpl_long_retry_limit = 10, + .tx_watchdog_timeout = 5000, + .slow_link_thold = 3, + .fast_link_thold = 10, + }, + .conn = { + .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, + .listen_interval = 1, + .suspend_wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM, + .suspend_listen_interval = 3, + .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED, + .bcn_filt_ie_count = 3, + .bcn_filt_ie = { + [0] = { + .ie = WLAN_EID_CHANNEL_SWITCH, + .rule = CONF_BCN_RULE_PASS_ON_APPEARANCE, + }, + [1] = { + .ie = WLAN_EID_HT_OPERATION, + .rule = CONF_BCN_RULE_PASS_ON_CHANGE, + }, + [2] = { + .ie = WLAN_EID_ERP_INFO, + .rule = CONF_BCN_RULE_PASS_ON_CHANGE, + }, + }, + .synch_fail_thold = 12, + .bss_lose_timeout = 400, + .beacon_rx_timeout = 10000, + .broadcast_timeout = 20000, + .rx_broadcast_in_ps = 1, + .ps_poll_threshold = 10, + .bet_enable = CONF_BET_MODE_ENABLE, + .bet_max_consecutive = 50, + .psm_entry_retries = 8, + .psm_exit_retries = 16, + .psm_entry_nullfunc_retries = 3, + .dynamic_ps_timeout = 1500, + .forced_ps = false, + .keep_alive_interval = 55000, + .max_listen_interval = 20, + .sta_sleep_auth = WL1271_PSM_ILLEGAL, + .suspend_rx_ba_activity = 0, + }, + .itrim = { + .enable = false, + .timeout = 50000, + }, + .pm_config = { + .host_clk_settling_time = 5000, + .host_fast_wakeup_support = CONF_FAST_WAKEUP_DISABLE, + }, + .roam_trigger = { + .trigger_pacing = 1, + .avg_weight_rssi_beacon = 20, + .avg_weight_rssi_data = 10, + .avg_weight_snr_beacon = 20, + .avg_weight_snr_data = 10, + }, + .scan = { + .min_dwell_time_active = 7500, + .max_dwell_time_active = 30000, + .min_dwell_time_active_long = 25000, + .max_dwell_time_active_long = 50000, + .dwell_time_passive = 100000, + .dwell_time_dfs = 150000, + .num_probe_reqs = 2, + .split_scan_timeout = 50000, + }, + .sched_scan = { + /* + * Values are in TU/1000 but since sched scan FW command + * params are in TUs rounding up may occur. + */ + .base_dwell_time = 7500, + .max_dwell_time_delta = 22500, + /* based on 250bits per probe @1Mbps */ + .dwell_time_delta_per_probe = 2000, + /* based on 250bits per probe @6Mbps (plus a bit more) */ + .dwell_time_delta_per_probe_5 = 350, + .dwell_time_passive = 100000, + .dwell_time_dfs = 150000, + .num_probe_reqs = 2, + .rssi_threshold = -90, + .snr_threshold = 0, + }, + .ht = { + .rx_ba_win_size = 8, + .tx_ba_win_size = 64, + .inactivity_timeout = 10000, + .tx_ba_tid_bitmap = CONF_TX_BA_ENABLED_TID_BITMAP, + }, + /* + * Memory config for wl127x chips is given in the + * wl12xx_default_priv_conf struct. The below configuration is + * for wl128x chips. + */ + .mem = { + .num_stations = 1, + .ssid_profiles = 1, + .rx_block_num = 40, + .tx_min_block_num = 40, + .dynamic_memory = 1, + .min_req_tx_blocks = 45, + .min_req_rx_blocks = 22, + .tx_min = 27, + }, + .fm_coex = { + .enable = true, + .swallow_period = 5, + .n_divider_fref_set_1 = 0xff, /* default */ + .n_divider_fref_set_2 = 12, + .m_divider_fref_set_1 = 0xffff, + .m_divider_fref_set_2 = 148, /* default */ + .coex_pll_stabilization_time = 0xffffffff, /* default */ + .ldo_stabilization_time = 0xffff, /* default */ + .fm_disturbed_band_margin = 0xff, /* default */ + .swallow_clk_diff = 0xff, /* default */ + }, + .rx_streaming = { + .duration = 150, + .queues = 0x1, + .interval = 20, + .always = 0, + }, + .fwlog = { + .mode = WL12XX_FWLOG_CONTINUOUS, + .mem_blocks = 2, + .severity = 0, + .timestamp = WL12XX_FWLOG_TIMESTAMP_DISABLED, + .output = WL12XX_FWLOG_OUTPUT_DBG_PINS, + .threshold = 0, + }, + .rate = { + .rate_retry_score = 32000, + .per_add = 8192, + .per_th1 = 2048, + .per_th2 = 4096, + .max_per = 8100, + .inverse_curiosity_factor = 5, + .tx_fail_low_th = 4, + .tx_fail_high_th = 10, + .per_alpha_shift = 4, + .per_add_shift = 13, + .per_beta1_shift = 10, + .per_beta2_shift = 8, + .rate_check_up = 2, + .rate_check_down = 12, + .rate_retry_policy = { + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + }, + }, + .hangover = { + .recover_time = 0, + .hangover_period = 20, + .dynamic_mode = 1, + .early_termination_mode = 1, + .max_period = 20, + .min_period = 1, + .increase_delta = 1, + .decrease_delta = 2, + .quiet_time = 4, + .increase_time = 1, + .window_size = 16, + }, + .recovery = { + .bug_on_recovery = 0, + .no_recovery = 0, + }, +}; + +static struct wl12xx_priv_conf wl12xx_default_priv_conf = { + .rf = { + .tx_per_channel_power_compensation_2 = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }, + .tx_per_channel_power_compensation_5 = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }, + }, + .mem_wl127x = { + .num_stations = 1, + .ssid_profiles = 1, + .rx_block_num = 70, + .tx_min_block_num = 40, + .dynamic_memory = 1, + .min_req_tx_blocks = 100, + .min_req_rx_blocks = 22, + .tx_min = 27, + }, + +}; + +#define WL12XX_TX_HW_BLOCK_SPARE_DEFAULT 1 +#define WL12XX_TX_HW_BLOCK_GEM_SPARE 2 +#define WL12XX_TX_HW_BLOCK_SIZE 252 + +static const u8 wl12xx_rate_to_idx_2ghz[] = { + /* MCS rates are used only with 11n */ + 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI */ + 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7 */ + 6, /* WL12XX_CONF_HW_RXTX_RATE_MCS6 */ + 5, /* WL12XX_CONF_HW_RXTX_RATE_MCS5 */ + 4, /* WL12XX_CONF_HW_RXTX_RATE_MCS4 */ + 3, /* WL12XX_CONF_HW_RXTX_RATE_MCS3 */ + 2, /* WL12XX_CONF_HW_RXTX_RATE_MCS2 */ + 1, /* WL12XX_CONF_HW_RXTX_RATE_MCS1 */ + 0, /* WL12XX_CONF_HW_RXTX_RATE_MCS0 */ + + 11, /* WL12XX_CONF_HW_RXTX_RATE_54 */ + 10, /* WL12XX_CONF_HW_RXTX_RATE_48 */ + 9, /* WL12XX_CONF_HW_RXTX_RATE_36 */ + 8, /* WL12XX_CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_22 */ + + 7, /* WL12XX_CONF_HW_RXTX_RATE_18 */ + 6, /* WL12XX_CONF_HW_RXTX_RATE_12 */ + 3, /* WL12XX_CONF_HW_RXTX_RATE_11 */ + 5, /* WL12XX_CONF_HW_RXTX_RATE_9 */ + 4, /* WL12XX_CONF_HW_RXTX_RATE_6 */ + 2, /* WL12XX_CONF_HW_RXTX_RATE_5_5 */ + 1, /* WL12XX_CONF_HW_RXTX_RATE_2 */ + 0 /* WL12XX_CONF_HW_RXTX_RATE_1 */ +}; + +static const u8 wl12xx_rate_to_idx_5ghz[] = { + /* MCS rates are used only with 11n */ + 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI */ + 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7 */ + 6, /* WL12XX_CONF_HW_RXTX_RATE_MCS6 */ + 5, /* WL12XX_CONF_HW_RXTX_RATE_MCS5 */ + 4, /* WL12XX_CONF_HW_RXTX_RATE_MCS4 */ + 3, /* WL12XX_CONF_HW_RXTX_RATE_MCS3 */ + 2, /* WL12XX_CONF_HW_RXTX_RATE_MCS2 */ + 1, /* WL12XX_CONF_HW_RXTX_RATE_MCS1 */ + 0, /* WL12XX_CONF_HW_RXTX_RATE_MCS0 */ + + 7, /* WL12XX_CONF_HW_RXTX_RATE_54 */ + 6, /* WL12XX_CONF_HW_RXTX_RATE_48 */ + 5, /* WL12XX_CONF_HW_RXTX_RATE_36 */ + 4, /* WL12XX_CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_22 */ + + 3, /* WL12XX_CONF_HW_RXTX_RATE_18 */ + 2, /* WL12XX_CONF_HW_RXTX_RATE_12 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_11 */ + 1, /* WL12XX_CONF_HW_RXTX_RATE_9 */ + 0, /* WL12XX_CONF_HW_RXTX_RATE_6 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_5_5 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_2 */ + CONF_HW_RXTX_RATE_UNSUPPORTED /* WL12XX_CONF_HW_RXTX_RATE_1 */ +}; + +static const u8 *wl12xx_band_rate_to_idx[] = { + [IEEE80211_BAND_2GHZ] = wl12xx_rate_to_idx_2ghz, + [IEEE80211_BAND_5GHZ] = wl12xx_rate_to_idx_5ghz +}; + +enum wl12xx_hw_rates { + WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI = 0, + WL12XX_CONF_HW_RXTX_RATE_MCS7, + WL12XX_CONF_HW_RXTX_RATE_MCS6, + WL12XX_CONF_HW_RXTX_RATE_MCS5, + WL12XX_CONF_HW_RXTX_RATE_MCS4, + WL12XX_CONF_HW_RXTX_RATE_MCS3, + WL12XX_CONF_HW_RXTX_RATE_MCS2, + WL12XX_CONF_HW_RXTX_RATE_MCS1, + WL12XX_CONF_HW_RXTX_RATE_MCS0, + WL12XX_CONF_HW_RXTX_RATE_54, + WL12XX_CONF_HW_RXTX_RATE_48, + WL12XX_CONF_HW_RXTX_RATE_36, + WL12XX_CONF_HW_RXTX_RATE_24, + WL12XX_CONF_HW_RXTX_RATE_22, + WL12XX_CONF_HW_RXTX_RATE_18, + WL12XX_CONF_HW_RXTX_RATE_12, + WL12XX_CONF_HW_RXTX_RATE_11, + WL12XX_CONF_HW_RXTX_RATE_9, + WL12XX_CONF_HW_RXTX_RATE_6, + WL12XX_CONF_HW_RXTX_RATE_5_5, + WL12XX_CONF_HW_RXTX_RATE_2, + WL12XX_CONF_HW_RXTX_RATE_1, + WL12XX_CONF_HW_RXTX_RATE_MAX, +}; + +static struct wlcore_partition_set wl12xx_ptable[PART_TABLE_LEN] = { + [PART_DOWN] = { + .mem = { + .start = 0x00000000, + .size = 0x000177c0 + }, + .reg = { + .start = REGISTERS_BASE, + .size = 0x00008800 + }, + .mem2 = { + .start = 0x00000000, + .size = 0x00000000 + }, + .mem3 = { + .start = 0x00000000, + .size = 0x00000000 + }, + }, + + [PART_BOOT] = { /* in wl12xx we can use a mix of work and down + * partition here */ + .mem = { + .start = 0x00040000, + .size = 0x00014fc0 + }, + .reg = { + .start = REGISTERS_BASE, + .size = 0x00008800 + }, + .mem2 = { + .start = 0x00000000, + .size = 0x00000000 + }, + .mem3 = { + .start = 0x00000000, + .size = 0x00000000 + }, + }, + + [PART_WORK] = { + .mem = { + .start = 0x00040000, + .size = 0x00014fc0 + }, + .reg = { + .start = REGISTERS_BASE, + .size = 0x0000a000 + }, + .mem2 = { + .start = 0x003004f8, + .size = 0x00000004 + }, + .mem3 = { + .start = 0x00040404, + .size = 0x00000000 + }, + }, + + [PART_DRPW] = { + .mem = { + .start = 0x00040000, + .size = 0x00014fc0 + }, + .reg = { + .start = DRPW_BASE, + .size = 0x00006000 + }, + .mem2 = { + .start = 0x00000000, + .size = 0x00000000 + }, + .mem3 = { + .start = 0x00000000, + .size = 0x00000000 + } + } +}; + +static const int wl12xx_rtable[REG_TABLE_LEN] = { + [REG_ECPU_CONTROL] = WL12XX_REG_ECPU_CONTROL, + [REG_INTERRUPT_NO_CLEAR] = WL12XX_REG_INTERRUPT_NO_CLEAR, + [REG_INTERRUPT_ACK] = WL12XX_REG_INTERRUPT_ACK, + [REG_COMMAND_MAILBOX_PTR] = WL12XX_REG_COMMAND_MAILBOX_PTR, + [REG_EVENT_MAILBOX_PTR] = WL12XX_REG_EVENT_MAILBOX_PTR, + [REG_INTERRUPT_TRIG] = WL12XX_REG_INTERRUPT_TRIG, + [REG_INTERRUPT_MASK] = WL12XX_REG_INTERRUPT_MASK, + [REG_PC_ON_RECOVERY] = WL12XX_SCR_PAD4, + [REG_CHIP_ID_B] = WL12XX_CHIP_ID_B, + [REG_CMD_MBOX_ADDRESS] = WL12XX_CMD_MBOX_ADDRESS, + + /* data access memory addresses, used with partition translation */ + [REG_SLV_MEM_DATA] = WL1271_SLV_MEM_DATA, + [REG_SLV_REG_DATA] = WL1271_SLV_REG_DATA, + + /* raw data access memory addresses */ + [REG_RAW_FW_STATUS_ADDR] = FW_STATUS_ADDR, +}; + +/* TODO: maybe move to a new header file? */ +#define WL127X_FW_NAME_MULTI "/*(DEBLOBBED)*/" +#define WL127X_FW_NAME_SINGLE "/*(DEBLOBBED)*/" +#define WL127X_PLT_FW_NAME "/*(DEBLOBBED)*/" + +#define WL128X_FW_NAME_MULTI "/*(DEBLOBBED)*/" +#define WL128X_FW_NAME_SINGLE "/*(DEBLOBBED)*/" +#define WL128X_PLT_FW_NAME "/*(DEBLOBBED)*/" + +static int wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len) +{ + int ret; + + if (wl->chip.id != CHIP_ID_128X_PG20) { + struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map; + struct wl12xx_priv *priv = wl->priv; + + /* + * Choose the block we want to read + * For aggregated packets, only the first memory block + * should be retrieved. The FW takes care of the rest. + */ + u32 mem_block = rx_desc & RX_MEM_BLOCK_MASK; + + priv->rx_mem_addr->addr = (mem_block << 8) + + le32_to_cpu(wl_mem_map->packet_memory_pool_start); + + priv->rx_mem_addr->addr_extra = priv->rx_mem_addr->addr + 4; + + ret = wlcore_write(wl, WL1271_SLV_REG_DATA, priv->rx_mem_addr, + sizeof(*priv->rx_mem_addr), false); + if (ret < 0) + return ret; + } + + return 0; +} + +static int wl12xx_identify_chip(struct wl1271 *wl) +{ + int ret = 0; + + switch (wl->chip.id) { + case CHIP_ID_127X_PG10: + wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete", + wl->chip.id); + + wl->quirks |= WLCORE_QUIRK_LEGACY_NVS | + WLCORE_QUIRK_DUAL_PROBE_TMPL | + WLCORE_QUIRK_TKIP_HEADER_SPACE | + WLCORE_QUIRK_START_STA_FAILS | + WLCORE_QUIRK_AP_ZERO_SESSION_ID; + wl->sr_fw_name = WL127X_FW_NAME_SINGLE; + wl->mr_fw_name = WL127X_FW_NAME_MULTI; + memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x, + sizeof(wl->conf.mem)); + + /* read data preparation is only needed by wl127x */ + wl->ops->prepare_read = wl127x_prepare_read; + + wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, + WL127X_IFTYPE_SR_VER, WL127X_MAJOR_SR_VER, + WL127X_SUBTYPE_SR_VER, WL127X_MINOR_SR_VER, + WL127X_IFTYPE_MR_VER, WL127X_MAJOR_MR_VER, + WL127X_SUBTYPE_MR_VER, WL127X_MINOR_MR_VER); + break; + + case CHIP_ID_127X_PG20: + wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)", + wl->chip.id); + + wl->quirks |= WLCORE_QUIRK_LEGACY_NVS | + WLCORE_QUIRK_DUAL_PROBE_TMPL | + WLCORE_QUIRK_TKIP_HEADER_SPACE | + WLCORE_QUIRK_START_STA_FAILS | + WLCORE_QUIRK_AP_ZERO_SESSION_ID; + wl->plt_fw_name = WL127X_PLT_FW_NAME; + wl->sr_fw_name = WL127X_FW_NAME_SINGLE; + wl->mr_fw_name = WL127X_FW_NAME_MULTI; + memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x, + sizeof(wl->conf.mem)); + + /* read data preparation is only needed by wl127x */ + wl->ops->prepare_read = wl127x_prepare_read; + + wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, + WL127X_IFTYPE_SR_VER, WL127X_MAJOR_SR_VER, + WL127X_SUBTYPE_SR_VER, WL127X_MINOR_SR_VER, + WL127X_IFTYPE_MR_VER, WL127X_MAJOR_MR_VER, + WL127X_SUBTYPE_MR_VER, WL127X_MINOR_MR_VER); + break; + + case CHIP_ID_128X_PG20: + wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1283 PG20)", + wl->chip.id); + wl->plt_fw_name = WL128X_PLT_FW_NAME; + wl->sr_fw_name = WL128X_FW_NAME_SINGLE; + wl->mr_fw_name = WL128X_FW_NAME_MULTI; + + /* wl128x requires TX blocksize alignment */ + wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | + WLCORE_QUIRK_DUAL_PROBE_TMPL | + WLCORE_QUIRK_TKIP_HEADER_SPACE | + WLCORE_QUIRK_START_STA_FAILS | + WLCORE_QUIRK_AP_ZERO_SESSION_ID; + + wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER, + WL128X_IFTYPE_SR_VER, WL128X_MAJOR_SR_VER, + WL128X_SUBTYPE_SR_VER, WL128X_MINOR_SR_VER, + WL128X_IFTYPE_MR_VER, WL128X_MAJOR_MR_VER, + WL128X_SUBTYPE_MR_VER, WL128X_MINOR_MR_VER); + break; + case CHIP_ID_128X_PG10: + default: + wl1271_warning("unsupported chip id: 0x%x", wl->chip.id); + ret = -ENODEV; + goto out; + } + + wl->fw_mem_block_size = 256; + wl->fwlog_end = 0x2000000; + + /* common settings */ + wl->scan_templ_id_2_4 = CMD_TEMPL_APP_PROBE_REQ_2_4_LEGACY; + wl->scan_templ_id_5 = CMD_TEMPL_APP_PROBE_REQ_5_LEGACY; + wl->sched_scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; + wl->sched_scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; + wl->max_channels_5 = WL12XX_MAX_CHANNELS_5GHZ; + wl->ba_rx_session_count_max = WL12XX_RX_BA_MAX_SESSIONS; +out: + return ret; +} + +static int __must_check wl12xx_top_reg_write(struct wl1271 *wl, int addr, + u16 val) +{ + int ret; + + /* write address >> 1 + 0x30000 to OCP_POR_CTR */ + addr = (addr >> 1) + 0x30000; + ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr); + if (ret < 0) + goto out; + + /* write value to OCP_POR_WDATA */ + ret = wlcore_write32(wl, WL12XX_OCP_DATA_WRITE, val); + if (ret < 0) + goto out; + + /* write 1 to OCP_CMD */ + ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE); + if (ret < 0) + goto out; + +out: + return ret; +} + +static int __must_check wl12xx_top_reg_read(struct wl1271 *wl, int addr, + u16 *out) +{ + u32 val; + int timeout = OCP_CMD_LOOP; + int ret; + + /* write address >> 1 + 0x30000 to OCP_POR_CTR */ + addr = (addr >> 1) + 0x30000; + ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr); + if (ret < 0) + return ret; + + /* write 2 to OCP_CMD */ + ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_READ); + if (ret < 0) + return ret; + + /* poll for data ready */ + do { + ret = wlcore_read32(wl, WL12XX_OCP_DATA_READ, &val); + if (ret < 0) + return ret; + } while (!(val & OCP_READY_MASK) && --timeout); + + if (!timeout) { + wl1271_warning("Top register access timed out."); + return -ETIMEDOUT; + } + + /* check data status and return if OK */ + if ((val & OCP_STATUS_MASK) != OCP_STATUS_OK) { + wl1271_warning("Top register access returned error."); + return -EIO; + } + + if (out) + *out = val & 0xffff; + + return 0; +} + +static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl) +{ + u16 spare_reg; + int ret; + + /* Mask bits [2] & [8:4] in the sys_clk_cfg register */ + ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg); + if (ret < 0) + return ret; + + if (spare_reg == 0xFFFF) + return -EFAULT; + spare_reg |= (BIT(3) | BIT(5) | BIT(6)); + ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg); + if (ret < 0) + return ret; + + /* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */ + ret = wl12xx_top_reg_write(wl, SYS_CLK_CFG_REG, + WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF); + if (ret < 0) + return ret; + + /* Delay execution for 15msec, to let the HW settle */ + mdelay(15); + + return 0; +} + +static bool wl128x_is_tcxo_valid(struct wl1271 *wl) +{ + u16 tcxo_detection; + int ret; + + ret = wl12xx_top_reg_read(wl, TCXO_CLK_DETECT_REG, &tcxo_detection); + if (ret < 0) + return false; + + if (tcxo_detection & TCXO_DET_FAILED) + return false; + + return true; +} + +static bool wl128x_is_fref_valid(struct wl1271 *wl) +{ + u16 fref_detection; + int ret; + + ret = wl12xx_top_reg_read(wl, FREF_CLK_DETECT_REG, &fref_detection); + if (ret < 0) + return false; + + if (fref_detection & FREF_CLK_DETECT_FAIL) + return false; + + return true; +} + +static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl) +{ + int ret; + + ret = wl12xx_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL); + if (ret < 0) + goto out; + + ret = wl12xx_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL); + if (ret < 0) + goto out; + + ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, + MCS_PLL_CONFIG_REG_VAL); + +out: + return ret; +} + +static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk) +{ + u16 spare_reg; + u16 pll_config; + u8 input_freq; + struct wl12xx_priv *priv = wl->priv; + int ret; + + /* Mask bits [3:1] in the sys_clk_cfg register */ + ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg); + if (ret < 0) + return ret; + + if (spare_reg == 0xFFFF) + return -EFAULT; + spare_reg |= BIT(2); + ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg); + if (ret < 0) + return ret; + + /* Handle special cases of the TCXO clock */ + if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_8 || + priv->tcxo_clock == WL12XX_TCXOCLOCK_33_6) + return wl128x_manually_configure_mcs_pll(wl); + + /* Set the input frequency according to the selected clock source */ + input_freq = (clk & 1) + 1; + + ret = wl12xx_top_reg_read(wl, MCS_PLL_CONFIG_REG, &pll_config); + if (ret < 0) + return ret; + + if (pll_config == 0xFFFF) + return -EFAULT; + pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT); + pll_config |= MCS_PLL_ENABLE_HP; + ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config); + + return ret; +} + +/* + * WL128x has two clocks input - TCXO and FREF. + * TCXO is the main clock of the device, while FREF is used to sync + * between the GPS and the cellular modem. + * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used + * as the WLAN/BT main clock. + */ +static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock) +{ + struct wl12xx_priv *priv = wl->priv; + u16 sys_clk_cfg; + int ret; + + /* For XTAL-only modes, FREF will be used after switching from TCXO */ + if (priv->ref_clock == WL12XX_REFCLOCK_26_XTAL || + priv->ref_clock == WL12XX_REFCLOCK_38_XTAL) { + if (!wl128x_switch_tcxo_to_fref(wl)) + return -EINVAL; + goto fref_clk; + } + + /* Query the HW, to determine which clock source we should use */ + ret = wl12xx_top_reg_read(wl, SYS_CLK_CFG_REG, &sys_clk_cfg); + if (ret < 0) + return ret; + + if (sys_clk_cfg == 0xFFFF) + return -EINVAL; + if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF) + goto fref_clk; + + /* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */ + if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_368 || + priv->tcxo_clock == WL12XX_TCXOCLOCK_32_736) { + if (!wl128x_switch_tcxo_to_fref(wl)) + return -EINVAL; + goto fref_clk; + } + + /* TCXO clock is selected */ + if (!wl128x_is_tcxo_valid(wl)) + return -EINVAL; + *selected_clock = priv->tcxo_clock; + goto config_mcs_pll; + +fref_clk: + /* FREF clock is selected */ + if (!wl128x_is_fref_valid(wl)) + return -EINVAL; + *selected_clock = priv->ref_clock; + +config_mcs_pll: + return wl128x_configure_mcs_pll(wl, *selected_clock); +} + +static int wl127x_boot_clk(struct wl1271 *wl) +{ + struct wl12xx_priv *priv = wl->priv; + u32 pause; + u32 clk; + int ret; + + if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3) + wl->quirks |= WLCORE_QUIRK_END_OF_TRANSACTION; + + if (priv->ref_clock == CONF_REF_CLK_19_2_E || + priv->ref_clock == CONF_REF_CLK_38_4_E || + priv->ref_clock == CONF_REF_CLK_38_4_M_XTAL) + /* ref clk: 19.2/38.4/38.4-XTAL */ + clk = 0x3; + else if (priv->ref_clock == CONF_REF_CLK_26_E || + priv->ref_clock == CONF_REF_CLK_26_M_XTAL || + priv->ref_clock == CONF_REF_CLK_52_E) + /* ref clk: 26/52 */ + clk = 0x5; + else + return -EINVAL; + + if (priv->ref_clock != CONF_REF_CLK_19_2_E) { + u16 val; + /* Set clock type (open drain) */ + ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_TYPE, &val); + if (ret < 0) + goto out; + + val &= FREF_CLK_TYPE_BITS; + ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val); + if (ret < 0) + goto out; + + /* Set clock pull mode (no pull) */ + ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL, &val); + if (ret < 0) + goto out; + + val |= NO_PULL; + ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val); + if (ret < 0) + goto out; + } else { + u16 val; + /* Set clock polarity */ + ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_POLARITY, &val); + if (ret < 0) + goto out; + + val &= FREF_CLK_POLARITY_BITS; + val |= CLK_REQ_OUTN_SEL; + ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val); + if (ret < 0) + goto out; + } + + ret = wlcore_write32(wl, WL12XX_PLL_PARAMETERS, clk); + if (ret < 0) + goto out; + + ret = wlcore_read32(wl, WL12XX_PLL_PARAMETERS, &pause); + if (ret < 0) + goto out; + + wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause); + + pause &= ~(WU_COUNTER_PAUSE_VAL); + pause |= WU_COUNTER_PAUSE_VAL; + ret = wlcore_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause); + +out: + return ret; +} + +static int wl1271_boot_soft_reset(struct wl1271 *wl) +{ + unsigned long timeout; + u32 boot_data; + int ret = 0; + + /* perform soft reset */ + ret = wlcore_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT); + if (ret < 0) + goto out; + + /* SOFT_RESET is self clearing */ + timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME); + while (1) { + ret = wlcore_read32(wl, WL12XX_SLV_SOFT_RESET, &boot_data); + if (ret < 0) + goto out; + + wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data); + if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0) + break; + + if (time_after(jiffies, timeout)) { + /* 1.2 check pWhalBus->uSelfClearTime if the + * timeout was reached */ + wl1271_error("soft reset timeout"); + return -1; + } + + udelay(SOFT_RESET_STALL_TIME); + } + + /* disable Rx/Tx */ + ret = wlcore_write32(wl, WL12XX_ENABLE, 0x0); + if (ret < 0) + goto out; + + /* disable auto calibration on start*/ + ret = wlcore_write32(wl, WL12XX_SPARE_A2, 0xffff); + +out: + return ret; +} + +static int wl12xx_pre_boot(struct wl1271 *wl) +{ + struct wl12xx_priv *priv = wl->priv; + int ret = 0; + u32 clk; + int selected_clock = -1; + + if (wl->chip.id == CHIP_ID_128X_PG20) { + ret = wl128x_boot_clk(wl, &selected_clock); + if (ret < 0) + goto out; + } else { + ret = wl127x_boot_clk(wl); + if (ret < 0) + goto out; + } + + /* Continue the ELP wake up sequence */ + ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); + if (ret < 0) + goto out; + + udelay(500); + + ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]); + if (ret < 0) + goto out; + + /* Read-modify-write DRPW_SCRATCH_START register (see next state) + to be used by DRPw FW. The RTRIM value will be added by the FW + before taking DRPw out of reset */ + + ret = wlcore_read32(wl, WL12XX_DRPW_SCRATCH_START, &clk); + if (ret < 0) + goto out; + + wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk); + + if (wl->chip.id == CHIP_ID_128X_PG20) + clk |= ((selected_clock & 0x3) << 1) << 4; + else + clk |= (priv->ref_clock << 1) << 4; + + ret = wlcore_write32(wl, WL12XX_DRPW_SCRATCH_START, clk); + if (ret < 0) + goto out; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]); + if (ret < 0) + goto out; + + /* Disable interrupts */ + ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); + if (ret < 0) + goto out; + + ret = wl1271_boot_soft_reset(wl); + if (ret < 0) + goto out; + +out: + return ret; +} + +static int wl12xx_pre_upload(struct wl1271 *wl) +{ + u32 tmp; + u16 polarity; + int ret; + + /* write firmware's last address (ie. it's length) to + * ACX_EEPROMLESS_IND_REG */ + wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG"); + + ret = wlcore_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND); + if (ret < 0) + goto out; + + ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp); + if (ret < 0) + goto out; + + wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); + + /* 6. read the EEPROM parameters */ + ret = wlcore_read32(wl, WL12XX_SCR_PAD2, &tmp); + if (ret < 0) + goto out; + + /* WL1271: The reference driver skips steps 7 to 10 (jumps directly + * to upload_fw) */ + + if (wl->chip.id == CHIP_ID_128X_PG20) { + ret = wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA); + if (ret < 0) + goto out; + } + + /* polarity must be set before the firmware is loaded */ + ret = wl12xx_top_reg_read(wl, OCP_REG_POLARITY, &polarity); + if (ret < 0) + goto out; + + /* We use HIGH polarity, so unset the LOW bit */ + polarity &= ~POLARITY_LOW; + ret = wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity); + +out: + return ret; +} + +static int wl12xx_enable_interrupts(struct wl1271 *wl) +{ + int ret; + + ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, + WL12XX_ACX_ALL_EVENTS_VECTOR); + if (ret < 0) + goto out; + + wlcore_enable_interrupts(wl); + ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, + WL1271_ACX_INTR_ALL & ~(WL12XX_INTR_MASK)); + if (ret < 0) + goto disable_interrupts; + + ret = wlcore_write32(wl, WL12XX_HI_CFG, HI_CFG_DEF_VAL); + if (ret < 0) + goto disable_interrupts; + + return ret; + +disable_interrupts: + wlcore_disable_interrupts(wl); + +out: + return ret; +} + +static int wl12xx_boot(struct wl1271 *wl) +{ + int ret; + + ret = wl12xx_pre_boot(wl); + if (ret < 0) + goto out; + + ret = wlcore_boot_upload_nvs(wl); + if (ret < 0) + goto out; + + ret = wl12xx_pre_upload(wl); + if (ret < 0) + goto out; + + ret = wlcore_boot_upload_firmware(wl); + if (ret < 0) + goto out; + + wl->event_mask = BSS_LOSE_EVENT_ID | + REGAINED_BSS_EVENT_ID | + SCAN_COMPLETE_EVENT_ID | + ROLE_STOP_COMPLETE_EVENT_ID | + RSSI_SNR_TRIGGER_0_EVENT_ID | + PSPOLL_DELIVERY_FAILURE_EVENT_ID | + SOFT_GEMINI_SENSE_EVENT_ID | + PERIODIC_SCAN_REPORT_EVENT_ID | + PERIODIC_SCAN_COMPLETE_EVENT_ID | + DUMMY_PACKET_EVENT_ID | + PEER_REMOVE_COMPLETE_EVENT_ID | + BA_SESSION_RX_CONSTRAINT_EVENT_ID | + REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | + INACTIVE_STA_EVENT_ID | + CHANNEL_SWITCH_COMPLETE_EVENT_ID; + + wl->ap_event_mask = MAX_TX_RETRY_EVENT_ID; + + ret = wlcore_boot_run_firmware(wl); + if (ret < 0) + goto out; + + ret = wl12xx_enable_interrupts(wl); + +out: + return ret; +} + +static int wl12xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr, + void *buf, size_t len) +{ + int ret; + + ret = wlcore_write(wl, cmd_box_addr, buf, len, false); + if (ret < 0) + return ret; + + ret = wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD); + + return ret; +} + +static int wl12xx_ack_event(struct wl1271 *wl) +{ + return wlcore_write_reg(wl, REG_INTERRUPT_TRIG, + WL12XX_INTR_TRIG_EVENT_ACK); +} + +static u32 wl12xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks) +{ + u32 blk_size = WL12XX_TX_HW_BLOCK_SIZE; + u32 align_len = wlcore_calc_packet_alignment(wl, len); + + return (align_len + blk_size - 1) / blk_size + spare_blks; +} + +static void +wl12xx_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, + u32 blks, u32 spare_blks) +{ + if (wl->chip.id == CHIP_ID_128X_PG20) { + desc->wl128x_mem.total_mem_blocks = blks; + } else { + desc->wl127x_mem.extra_blocks = spare_blks; + desc->wl127x_mem.total_mem_blocks = blks; + } +} + +static void +wl12xx_set_tx_desc_data_len(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, + struct sk_buff *skb) +{ + u32 aligned_len = wlcore_calc_packet_alignment(wl, skb->len); + + if (wl->chip.id == CHIP_ID_128X_PG20) { + desc->wl128x_mem.extra_bytes = aligned_len - skb->len; + desc->length = cpu_to_le16(aligned_len >> 2); + + wl1271_debug(DEBUG_TX, + "tx_fill_hdr: hlid: %d len: %d life: %d mem: %d extra: %d", + desc->hlid, + le16_to_cpu(desc->length), + le16_to_cpu(desc->life_time), + desc->wl128x_mem.total_mem_blocks, + desc->wl128x_mem.extra_bytes); + } else { + /* calculate number of padding bytes */ + int pad = aligned_len - skb->len; + desc->tx_attr |= + cpu_to_le16(pad << TX_HW_ATTR_OFST_LAST_WORD_PAD); + + /* Store the aligned length in terms of words */ + desc->length = cpu_to_le16(aligned_len >> 2); + + wl1271_debug(DEBUG_TX, + "tx_fill_hdr: pad: %d hlid: %d len: %d life: %d mem: %d", + pad, desc->hlid, + le16_to_cpu(desc->length), + le16_to_cpu(desc->life_time), + desc->wl127x_mem.total_mem_blocks); + } +} + +static enum wl_rx_buf_align +wl12xx_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc) +{ + if (rx_desc & RX_BUF_UNALIGNED_PAYLOAD) + return WLCORE_RX_BUF_UNALIGNED; + + return WLCORE_RX_BUF_ALIGNED; +} + +static u32 wl12xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data, + u32 data_len) +{ + struct wl1271_rx_descriptor *desc = rx_data; + + /* invalid packet */ + if (data_len < sizeof(*desc) || + data_len < sizeof(*desc) + desc->pad_len) + return 0; + + return data_len - sizeof(*desc) - desc->pad_len; +} + +static int wl12xx_tx_delayed_compl(struct wl1271 *wl) +{ + if (wl->fw_status->tx_results_counter == + (wl->tx_results_count & 0xff)) + return 0; + + return wlcore_tx_complete(wl); +} + +static int wl12xx_hw_init(struct wl1271 *wl) +{ + int ret; + + if (wl->chip.id == CHIP_ID_128X_PG20) { + u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE; + + ret = wl128x_cmd_general_parms(wl); + if (ret < 0) + goto out; + + /* + * If we are in calibrator based auto detect then we got the FEM nr + * in wl->fem_manuf. No need to continue further + */ + if (wl->plt_mode == PLT_FEM_DETECT) + goto out; + + ret = wl128x_cmd_radio_parms(wl); + if (ret < 0) + goto out; + + if (wl->quirks & WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN) + /* Enable SDIO padding */ + host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK; + + /* Must be before wl1271_acx_init_mem_config() */ + ret = wl1271_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap); + if (ret < 0) + goto out; + } else { + ret = wl1271_cmd_general_parms(wl); + if (ret < 0) + goto out; + + /* + * If we are in calibrator based auto detect then we got the FEM nr + * in wl->fem_manuf. No need to continue further + */ + if (wl->plt_mode == PLT_FEM_DETECT) + goto out; + + ret = wl1271_cmd_radio_parms(wl); + if (ret < 0) + goto out; + ret = wl1271_cmd_ext_radio_parms(wl); + if (ret < 0) + goto out; + } +out: + return ret; +} + +static void wl12xx_convert_fw_status(struct wl1271 *wl, void *raw_fw_status, + struct wl_fw_status *fw_status) +{ + struct wl12xx_fw_status *int_fw_status = raw_fw_status; + + fw_status->intr = le32_to_cpu(int_fw_status->intr); + fw_status->fw_rx_counter = int_fw_status->fw_rx_counter; + fw_status->drv_rx_counter = int_fw_status->drv_rx_counter; + fw_status->tx_results_counter = int_fw_status->tx_results_counter; + fw_status->rx_pkt_descs = int_fw_status->rx_pkt_descs; + + fw_status->fw_localtime = le32_to_cpu(int_fw_status->fw_localtime); + fw_status->link_ps_bitmap = le32_to_cpu(int_fw_status->link_ps_bitmap); + fw_status->link_fast_bitmap = + le32_to_cpu(int_fw_status->link_fast_bitmap); + fw_status->total_released_blks = + le32_to_cpu(int_fw_status->total_released_blks); + fw_status->tx_total = le32_to_cpu(int_fw_status->tx_total); + + fw_status->counters.tx_released_pkts = + int_fw_status->counters.tx_released_pkts; + fw_status->counters.tx_lnk_free_pkts = + int_fw_status->counters.tx_lnk_free_pkts; + fw_status->counters.tx_voice_released_blks = + int_fw_status->counters.tx_voice_released_blks; + fw_status->counters.tx_last_rate = + int_fw_status->counters.tx_last_rate; + + fw_status->log_start_addr = le32_to_cpu(int_fw_status->log_start_addr); +} + +static u32 wl12xx_sta_get_ap_rate_mask(struct wl1271 *wl, + struct wl12xx_vif *wlvif) +{ + return wlvif->rate_set; +} + +static void wl12xx_conf_init(struct wl1271 *wl) +{ + struct wl12xx_priv *priv = wl->priv; + + /* apply driver default configuration */ + memcpy(&wl->conf, &wl12xx_conf, sizeof(wl12xx_conf)); + + /* apply default private configuration */ + memcpy(&priv->conf, &wl12xx_default_priv_conf, sizeof(priv->conf)); +} + +static bool wl12xx_mac_in_fuse(struct wl1271 *wl) +{ + bool supported = false; + u8 major, minor; + + if (wl->chip.id == CHIP_ID_128X_PG20) { + major = WL128X_PG_GET_MAJOR(wl->hw_pg_ver); + minor = WL128X_PG_GET_MINOR(wl->hw_pg_ver); + + /* in wl128x we have the MAC address if the PG is >= (2, 1) */ + if (major > 2 || (major == 2 && minor >= 1)) + supported = true; + } else { + major = WL127X_PG_GET_MAJOR(wl->hw_pg_ver); + minor = WL127X_PG_GET_MINOR(wl->hw_pg_ver); + + /* in wl127x we have the MAC address if the PG is >= (3, 1) */ + if (major == 3 && minor >= 1) + supported = true; + } + + wl1271_debug(DEBUG_PROBE, + "PG Ver major = %d minor = %d, MAC %s present", + major, minor, supported ? "is" : "is not"); + + return supported; +} + +static int wl12xx_get_fuse_mac(struct wl1271 *wl) +{ + u32 mac1, mac2; + int ret; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]); + if (ret < 0) + goto out; + + ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1, &mac1); + if (ret < 0) + goto out; + + ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_2, &mac2); + if (ret < 0) + goto out; + + /* these are the two parts of the BD_ADDR */ + wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) + + ((mac1 & 0xff000000) >> 24); + wl->fuse_nic_addr = mac1 & 0xffffff; + + ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]); + +out: + return ret; +} + +static int wl12xx_get_pg_ver(struct wl1271 *wl, s8 *ver) +{ + u16 die_info; + int ret; + + if (wl->chip.id == CHIP_ID_128X_PG20) + ret = wl12xx_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1, + &die_info); + else + ret = wl12xx_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1, + &die_info); + + if (ret >= 0 && ver) + *ver = (s8)((die_info & PG_VER_MASK) >> PG_VER_OFFSET); + + return ret; +} + +static int wl12xx_get_mac(struct wl1271 *wl) +{ + if (wl12xx_mac_in_fuse(wl)) + return wl12xx_get_fuse_mac(wl); + + return 0; +} + +static void wl12xx_set_tx_desc_csum(struct wl1271 *wl, + struct wl1271_tx_hw_descr *desc, + struct sk_buff *skb) +{ + desc->wl12xx_reserved = 0; +} + +static int wl12xx_plt_init(struct wl1271 *wl) +{ + int ret; + + ret = wl->ops->boot(wl); + if (ret < 0) + goto out; + + ret = wl->ops->hw_init(wl); + if (ret < 0) + goto out_irq_disable; + + /* + * If we are in calibrator based auto detect then we got the FEM nr + * in wl->fem_manuf. No need to continue further + */ + if (wl->plt_mode == PLT_FEM_DETECT) + goto out; + + ret = wl1271_acx_init_mem_config(wl); + if (ret < 0) + goto out_irq_disable; + + ret = wl12xx_acx_mem_cfg(wl); + if (ret < 0) + goto out_free_memmap; + + /* Enable data path */ + ret = wl1271_cmd_data_path(wl, 1); + if (ret < 0) + goto out_free_memmap; + + /* Configure for CAM power saving (ie. always active) */ + ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM); + if (ret < 0) + goto out_free_memmap; + + /* configure PM */ + ret = wl1271_acx_pm_config(wl); + if (ret < 0) + goto out_free_memmap; + + goto out; + +out_free_memmap: + kfree(wl->target_mem_map); + wl->target_mem_map = NULL; + +out_irq_disable: + mutex_unlock(&wl->mutex); + /* Unlocking the mutex in the middle of handling is + inherently unsafe. In this case we deem it safe to do, + because we need to let any possibly pending IRQ out of + the system (and while we are WL1271_STATE_OFF the IRQ + work function will not do anything.) Also, any other + possible concurrent operations will fail due to the + current state, hence the wl1271 struct should be safe. */ + wlcore_disable_interrupts(wl); + mutex_lock(&wl->mutex); +out: + return ret; +} + +static int wl12xx_get_spare_blocks(struct wl1271 *wl, bool is_gem) +{ + if (is_gem) + return WL12XX_TX_HW_BLOCK_GEM_SPARE; + + return WL12XX_TX_HW_BLOCK_SPARE_DEFAULT; +} + +static int wl12xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key_conf) +{ + return wlcore_set_key(wl, cmd, vif, sta, key_conf); +} + +static int wl12xx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + return wl1271_acx_set_ht_capabilities(wl, ht_cap, allow_ht_operation, + hlid); +} + +static bool wl12xx_lnk_high_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + u8 thold; + + if (test_bit(hlid, &wl->fw_fast_lnk_map)) + thold = wl->conf.tx.fast_link_thold; + else + thold = wl->conf.tx.slow_link_thold; + + return lnk->allocated_pkts < thold; +} + +static bool wl12xx_lnk_low_prio(struct wl1271 *wl, u8 hlid, + struct wl1271_link *lnk) +{ + /* any link is good for low priority */ + return true; +} + +static u32 wl12xx_convert_hwaddr(struct wl1271 *wl, u32 hwaddr) +{ + return hwaddr << 5; +} + +static int wl12xx_setup(struct wl1271 *wl); + +static struct wlcore_ops wl12xx_ops = { + .setup = wl12xx_setup, + .identify_chip = wl12xx_identify_chip, + .boot = wl12xx_boot, + .plt_init = wl12xx_plt_init, + .trigger_cmd = wl12xx_trigger_cmd, + .ack_event = wl12xx_ack_event, + .wait_for_event = wl12xx_wait_for_event, + .process_mailbox_events = wl12xx_process_mailbox_events, + .calc_tx_blocks = wl12xx_calc_tx_blocks, + .set_tx_desc_blocks = wl12xx_set_tx_desc_blocks, + .set_tx_desc_data_len = wl12xx_set_tx_desc_data_len, + .get_rx_buf_align = wl12xx_get_rx_buf_align, + .get_rx_packet_len = wl12xx_get_rx_packet_len, + .tx_immediate_compl = NULL, + .tx_delayed_compl = wl12xx_tx_delayed_compl, + .hw_init = wl12xx_hw_init, + .init_vif = NULL, + .convert_fw_status = wl12xx_convert_fw_status, + .sta_get_ap_rate_mask = wl12xx_sta_get_ap_rate_mask, + .get_pg_ver = wl12xx_get_pg_ver, + .get_mac = wl12xx_get_mac, + .set_tx_desc_csum = wl12xx_set_tx_desc_csum, + .set_rx_csum = NULL, + .ap_get_mimo_wide_rate_mask = NULL, + .debugfs_init = wl12xx_debugfs_add_files, + .scan_start = wl12xx_scan_start, + .scan_stop = wl12xx_scan_stop, + .sched_scan_start = wl12xx_sched_scan_start, + .sched_scan_stop = wl12xx_scan_sched_scan_stop, + .get_spare_blocks = wl12xx_get_spare_blocks, + .set_key = wl12xx_set_key, + .channel_switch = wl12xx_cmd_channel_switch, + .pre_pkt_send = NULL, + .set_peer_cap = wl12xx_set_peer_cap, + .convert_hwaddr = wl12xx_convert_hwaddr, + .lnk_high_prio = wl12xx_lnk_high_prio, + .lnk_low_prio = wl12xx_lnk_low_prio, + .interrupt_notify = NULL, + .rx_ba_filter = NULL, + .ap_sleep = NULL, +}; + +static struct ieee80211_sta_ht_cap wl12xx_ht_cap = { + .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | + (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT), + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, + .mcs = { + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(72), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + }, +}; + +static const struct ieee80211_iface_limit wl12xx_iface_limits[] = { + { + .max = 3, + .types = BIT(NL80211_IFTYPE_STATION), + }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_P2P_GO) | + BIT(NL80211_IFTYPE_P2P_CLIENT), + }, +}; + +static const struct ieee80211_iface_combination +wl12xx_iface_combinations[] = { + { + .max_interfaces = 3, + .limits = wl12xx_iface_limits, + .n_limits = ARRAY_SIZE(wl12xx_iface_limits), + .num_different_channels = 1, + }, +}; + +static const struct wl12xx_clock wl12xx_refclock_table[] = { + { 19200000, false, WL12XX_REFCLOCK_19 }, + { 26000000, false, WL12XX_REFCLOCK_26 }, + { 26000000, true, WL12XX_REFCLOCK_26_XTAL }, + { 38400000, false, WL12XX_REFCLOCK_38 }, + { 38400000, true, WL12XX_REFCLOCK_38_XTAL }, + { 52000000, false, WL12XX_REFCLOCK_52 }, + { 0, false, 0 } +}; + +static const struct wl12xx_clock wl12xx_tcxoclock_table[] = { + { 16368000, true, WL12XX_TCXOCLOCK_16_368 }, + { 16800000, true, WL12XX_TCXOCLOCK_16_8 }, + { 19200000, true, WL12XX_TCXOCLOCK_19_2 }, + { 26000000, true, WL12XX_TCXOCLOCK_26 }, + { 32736000, true, WL12XX_TCXOCLOCK_32_736 }, + { 33600000, true, WL12XX_TCXOCLOCK_33_6 }, + { 38400000, true, WL12XX_TCXOCLOCK_38_4 }, + { 52000000, true, WL12XX_TCXOCLOCK_52 }, + { 0, false, 0 } +}; + +static int wl12xx_get_clock_idx(const struct wl12xx_clock *table, + u32 freq, bool xtal) +{ + int i; + + for (i = 0; table[i].freq != 0; i++) + if ((table[i].freq == freq) && (table[i].xtal == xtal)) + return table[i].hw_idx; + + return -EINVAL; +} + +static int wl12xx_setup(struct wl1271 *wl) +{ + struct wl12xx_priv *priv = wl->priv; + struct wlcore_platdev_data *pdev_data = dev_get_platdata(&wl->pdev->dev); + + BUILD_BUG_ON(WL12XX_MAX_LINKS > WLCORE_MAX_LINKS); + BUILD_BUG_ON(WL12XX_MAX_AP_STATIONS > WL12XX_MAX_LINKS); + + wl->rtable = wl12xx_rtable; + wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS; + wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS; + wl->num_links = WL12XX_MAX_LINKS; + wl->max_ap_stations = WL12XX_MAX_AP_STATIONS; + wl->iface_combinations = wl12xx_iface_combinations; + wl->n_iface_combinations = ARRAY_SIZE(wl12xx_iface_combinations); + wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES; + wl->band_rate_to_idx = wl12xx_band_rate_to_idx; + wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX; + wl->hw_min_ht_rate = WL12XX_CONF_HW_RXTX_RATE_MCS0; + wl->fw_status_len = sizeof(struct wl12xx_fw_status); + wl->fw_status_priv_len = 0; + wl->stats.fw_stats_len = sizeof(struct wl12xx_acx_statistics); + wl->ofdm_only_ap = true; + wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, &wl12xx_ht_cap); + wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, &wl12xx_ht_cap); + wl12xx_conf_init(wl); + + if (!fref_param) { + priv->ref_clock = wl12xx_get_clock_idx(wl12xx_refclock_table, + pdev_data->ref_clock_freq, + pdev_data->ref_clock_xtal); + if (priv->ref_clock < 0) { + wl1271_error("Invalid ref_clock frequency (%d Hz, %s)", + pdev_data->ref_clock_freq, + pdev_data->ref_clock_xtal ? + "XTAL" : "not XTAL"); + + return priv->ref_clock; + } + } else { + if (!strcmp(fref_param, "19.2")) + priv->ref_clock = WL12XX_REFCLOCK_19; + else if (!strcmp(fref_param, "26")) + priv->ref_clock = WL12XX_REFCLOCK_26; + else if (!strcmp(fref_param, "26x")) + priv->ref_clock = WL12XX_REFCLOCK_26_XTAL; + else if (!strcmp(fref_param, "38.4")) + priv->ref_clock = WL12XX_REFCLOCK_38; + else if (!strcmp(fref_param, "38.4x")) + priv->ref_clock = WL12XX_REFCLOCK_38_XTAL; + else if (!strcmp(fref_param, "52")) + priv->ref_clock = WL12XX_REFCLOCK_52; + else + wl1271_error("Invalid fref parameter %s", fref_param); + } + + if (!tcxo_param && pdev_data->tcxo_clock_freq) { + priv->tcxo_clock = wl12xx_get_clock_idx(wl12xx_tcxoclock_table, + pdev_data->tcxo_clock_freq, + true); + if (priv->tcxo_clock < 0) { + wl1271_error("Invalid tcxo_clock frequency (%d Hz)", + pdev_data->tcxo_clock_freq); + + return priv->tcxo_clock; + } + } else if (tcxo_param) { + if (!strcmp(tcxo_param, "19.2")) + priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2; + else if (!strcmp(tcxo_param, "26")) + priv->tcxo_clock = WL12XX_TCXOCLOCK_26; + else if (!strcmp(tcxo_param, "38.4")) + priv->tcxo_clock = WL12XX_TCXOCLOCK_38_4; + else if (!strcmp(tcxo_param, "52")) + priv->tcxo_clock = WL12XX_TCXOCLOCK_52; + else if (!strcmp(tcxo_param, "16.368")) + priv->tcxo_clock = WL12XX_TCXOCLOCK_16_368; + else if (!strcmp(tcxo_param, "32.736")) + priv->tcxo_clock = WL12XX_TCXOCLOCK_32_736; + else if (!strcmp(tcxo_param, "16.8")) + priv->tcxo_clock = WL12XX_TCXOCLOCK_16_8; + else if (!strcmp(tcxo_param, "33.6")) + priv->tcxo_clock = WL12XX_TCXOCLOCK_33_6; + else + wl1271_error("Invalid tcxo parameter %s", tcxo_param); + } + + priv->rx_mem_addr = kmalloc(sizeof(*priv->rx_mem_addr), GFP_KERNEL); + if (!priv->rx_mem_addr) + return -ENOMEM; + + return 0; +} + +static int wl12xx_probe(struct platform_device *pdev) +{ + struct wl1271 *wl; + struct ieee80211_hw *hw; + int ret; + + hw = wlcore_alloc_hw(sizeof(struct wl12xx_priv), + WL12XX_AGGR_BUFFER_SIZE, + sizeof(struct wl12xx_event_mailbox)); + if (IS_ERR(hw)) { + wl1271_error("can't allocate hw"); + ret = PTR_ERR(hw); + goto out; + } + + wl = hw->priv; + wl->ops = &wl12xx_ops; + wl->ptable = wl12xx_ptable; + ret = wlcore_probe(wl, pdev); + if (ret) + goto out_free; + + return ret; + +out_free: + wlcore_free_hw(wl); +out: + return ret; +} + +static int wl12xx_remove(struct platform_device *pdev) +{ + struct wl1271 *wl = platform_get_drvdata(pdev); + struct wl12xx_priv *priv; + + if (!wl) + goto out; + priv = wl->priv; + + kfree(priv->rx_mem_addr); + +out: + return wlcore_remove(pdev); +} + +static const struct platform_device_id wl12xx_id_table[] = { + { "wl12xx", 0 }, + { } /* Terminating Entry */ +}; +MODULE_DEVICE_TABLE(platform, wl12xx_id_table); + +static struct platform_driver wl12xx_driver = { + .probe = wl12xx_probe, + .remove = wl12xx_remove, + .id_table = wl12xx_id_table, + .driver = { + .name = "wl12xx_driver", + } +}; + +module_platform_driver(wl12xx_driver); + +module_param_named(fref, fref_param, charp, 0); +MODULE_PARM_DESC(fref, "FREF clock: 19.2, 26, 26x, 38.4, 38.4x, 52"); + +module_param_named(tcxo, tcxo_param, charp, 0); +MODULE_PARM_DESC(tcxo, + "TCXO clock: 19.2, 26, 38.4, 52, 16.368, 32.736, 16.8, 33.6"); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); +/*(DEBLOBBED)*/ diff --git a/drivers/net/wireless/ti/wl12xx/reg.h b/drivers/net/wireless/ti/wl12xx/reg.h new file mode 100644 index 000000000..79ede02e2 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/reg.h @@ -0,0 +1,556 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho <luciano.coelho@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __REG_H__ +#define __REG_H__ + +#include <linux/bitops.h> + +#define REGISTERS_BASE 0x00300000 +#define DRPW_BASE 0x00310000 + +#define REGISTERS_DOWN_SIZE 0x00008800 +#define REGISTERS_WORK_SIZE 0x0000b000 + +#define FW_STATUS_ADDR (0x14FC0 + 0xA000) + +/*=============================================== + Host Software Reset - 32bit RW + ------------------------------------------ + [31:1] Reserved + 0 SOFT_RESET Soft Reset - When this bit is set, + it holds the Wlan hardware in a soft reset state. + This reset disables all MAC and baseband processor + clocks except the CardBus/PCI interface clock. + It also initializes all MAC state machines except + the host interface. It does not reload the + contents of the EEPROM. When this bit is cleared + (not self-clearing), the Wlan hardware + exits the software reset state. +===============================================*/ +#define WL12XX_SLV_SOFT_RESET (REGISTERS_BASE + 0x0000) + +#define WL1271_SLV_REG_DATA (REGISTERS_BASE + 0x0008) +#define WL1271_SLV_REG_ADATA (REGISTERS_BASE + 0x000c) +#define WL1271_SLV_MEM_DATA (REGISTERS_BASE + 0x0018) + +#define WL12XX_REG_INTERRUPT_TRIG (REGISTERS_BASE + 0x0474) +#define WL12XX_REG_INTERRUPT_TRIG_H (REGISTERS_BASE + 0x0478) + +/*============================================= + Host Interrupt Mask Register - 32bit (RW) + ------------------------------------------ + Setting a bit in this register masks the + corresponding interrupt to the host. + 0 - RX0 - Rx first dubble buffer Data Interrupt + 1 - TXD - Tx Data Interrupt + 2 - TXXFR - Tx Transfer Interrupt + 3 - RX1 - Rx second dubble buffer Data Interrupt + 4 - RXXFR - Rx Transfer Interrupt + 5 - EVENT_A - Event Mailbox interrupt + 6 - EVENT_B - Event Mailbox interrupt + 7 - WNONHST - Wake On Host Interrupt + 8 - TRACE_A - Debug Trace interrupt + 9 - TRACE_B - Debug Trace interrupt + 10 - CDCMP - Command Complete Interrupt + 11 - + 12 - + 13 - + 14 - ICOMP - Initialization Complete Interrupt + 16 - SG SE - Soft Gemini - Sense enable interrupt + 17 - SG SD - Soft Gemini - Sense disable interrupt + 18 - - + 19 - - + 20 - - + 21- - + Default: 0x0001 +*==============================================*/ +#define WL12XX_REG_INTERRUPT_MASK (REGISTERS_BASE + 0x04DC) + +/*============================================= + Host Interrupt Mask Set 16bit, (Write only) + ------------------------------------------ + Setting a bit in this register sets + the corresponding bin in ACX_HINT_MASK register + without effecting the mask + state of other bits (0 = no effect). +==============================================*/ +#define ACX_REG_HINT_MASK_SET (REGISTERS_BASE + 0x04E0) + +/*============================================= + Host Interrupt Mask Clear 16bit,(Write only) + ------------------------------------------ + Setting a bit in this register clears + the corresponding bin in ACX_HINT_MASK register + without effecting the mask + state of other bits (0 = no effect). +=============================================*/ +#define ACX_REG_HINT_MASK_CLR (REGISTERS_BASE + 0x04E4) + +/*============================================= + Host Interrupt Status Nondestructive Read + 16bit,(Read only) + ------------------------------------------ + The host can read this register to determine + which interrupts are active. + Reading this register doesn't + effect its content. +=============================================*/ +#define WL12XX_REG_INTERRUPT_NO_CLEAR (REGISTERS_BASE + 0x04E8) + +/*============================================= + Host Interrupt Status Clear on Read Register + 16bit,(Read only) + ------------------------------------------ + The host can read this register to determine + which interrupts are active. + Reading this register clears it, + thus making all interrupts inactive. +==============================================*/ +#define ACX_REG_INTERRUPT_CLEAR (REGISTERS_BASE + 0x04F8) + +/*============================================= + Host Interrupt Acknowledge Register + 16bit,(Write only) + ------------------------------------------ + The host can set individual bits in this + register to clear (acknowledge) the corresp. + interrupt status bits in the HINT_STS_CLR and + HINT_STS_ND registers, thus making the + assotiated interrupt inactive. (0-no effect) +==============================================*/ +#define WL12XX_REG_INTERRUPT_ACK (REGISTERS_BASE + 0x04F0) + +#define WL12XX_REG_RX_DRIVER_COUNTER (REGISTERS_BASE + 0x0538) + +/* Device Configuration registers*/ +#define SOR_CFG (REGISTERS_BASE + 0x0800) + +/* Embedded ARM CPU Control */ + +/*=============================================== + Halt eCPU - 32bit RW + ------------------------------------------ + 0 HALT_ECPU Halt Embedded CPU - This bit is the + compliment of bit 1 (MDATA2) in the SOR_CFG register. + During a hardware reset, this bit holds + the inverse of MDATA2. + When downloading firmware from the host, + set this bit (pull down MDATA2). + The host clears this bit after downloading the firmware into + zero-wait-state SSRAM. + When loading firmware from Flash, clear this bit (pull up MDATA2) + so that the eCPU can run the bootloader code in Flash + HALT_ECPU eCPU State + -------------------- + 1 halt eCPU + 0 enable eCPU + ===============================================*/ +#define WL12XX_REG_ECPU_CONTROL (REGISTERS_BASE + 0x0804) + +#define WL12XX_HI_CFG (REGISTERS_BASE + 0x0808) + +/*=============================================== + EEPROM Burst Read Start - 32bit RW + ------------------------------------------ + [31:1] Reserved + 0 ACX_EE_START - EEPROM Burst Read Start 0 + Setting this bit starts a burst read from + the external EEPROM. + If this bit is set (after reset) before an EEPROM read/write, + the burst read starts at EEPROM address 0. + Otherwise, it starts at the address + following the address of the previous access. + TheWlan hardware hardware clears this bit automatically. + + Default: 0x00000000 +*================================================*/ +#define ACX_REG_EE_START (REGISTERS_BASE + 0x080C) + +#define WL12XX_OCP_POR_CTR (REGISTERS_BASE + 0x09B4) +#define WL12XX_OCP_DATA_WRITE (REGISTERS_BASE + 0x09B8) +#define WL12XX_OCP_DATA_READ (REGISTERS_BASE + 0x09BC) +#define WL12XX_OCP_CMD (REGISTERS_BASE + 0x09C0) + +#define WL12XX_HOST_WR_ACCESS (REGISTERS_BASE + 0x09F8) + +#define WL12XX_CHIP_ID_B (REGISTERS_BASE + 0x5674) + +#define WL12XX_ENABLE (REGISTERS_BASE + 0x5450) + +/* Power Management registers */ +#define WL12XX_ELP_CFG_MODE (REGISTERS_BASE + 0x5804) +#define WL12XX_ELP_CMD (REGISTERS_BASE + 0x5808) +#define WL12XX_PLL_CAL_TIME (REGISTERS_BASE + 0x5810) +#define WL12XX_CLK_REQ_TIME (REGISTERS_BASE + 0x5814) +#define WL12XX_CLK_BUF_TIME (REGISTERS_BASE + 0x5818) + +#define WL12XX_CFG_PLL_SYNC_CNT (REGISTERS_BASE + 0x5820) + +/* Scratch Pad registers*/ +#define WL12XX_SCR_PAD0 (REGISTERS_BASE + 0x5608) +#define WL12XX_SCR_PAD1 (REGISTERS_BASE + 0x560C) +#define WL12XX_SCR_PAD2 (REGISTERS_BASE + 0x5610) +#define WL12XX_SCR_PAD3 (REGISTERS_BASE + 0x5614) +#define WL12XX_SCR_PAD4 (REGISTERS_BASE + 0x5618) +#define WL12XX_SCR_PAD4_SET (REGISTERS_BASE + 0x561C) +#define WL12XX_SCR_PAD4_CLR (REGISTERS_BASE + 0x5620) +#define WL12XX_SCR_PAD5 (REGISTERS_BASE + 0x5624) +#define WL12XX_SCR_PAD5_SET (REGISTERS_BASE + 0x5628) +#define WL12XX_SCR_PAD5_CLR (REGISTERS_BASE + 0x562C) +#define WL12XX_SCR_PAD6 (REGISTERS_BASE + 0x5630) +#define WL12XX_SCR_PAD7 (REGISTERS_BASE + 0x5634) +#define WL12XX_SCR_PAD8 (REGISTERS_BASE + 0x5638) +#define WL12XX_SCR_PAD9 (REGISTERS_BASE + 0x563C) + +/* Spare registers*/ +#define WL12XX_SPARE_A1 (REGISTERS_BASE + 0x0994) +#define WL12XX_SPARE_A2 (REGISTERS_BASE + 0x0998) +#define WL12XX_SPARE_A3 (REGISTERS_BASE + 0x099C) +#define WL12XX_SPARE_A4 (REGISTERS_BASE + 0x09A0) +#define WL12XX_SPARE_A5 (REGISTERS_BASE + 0x09A4) +#define WL12XX_SPARE_A6 (REGISTERS_BASE + 0x09A8) +#define WL12XX_SPARE_A7 (REGISTERS_BASE + 0x09AC) +#define WL12XX_SPARE_A8 (REGISTERS_BASE + 0x09B0) +#define WL12XX_SPARE_B1 (REGISTERS_BASE + 0x5420) +#define WL12XX_SPARE_B2 (REGISTERS_BASE + 0x5424) +#define WL12XX_SPARE_B3 (REGISTERS_BASE + 0x5428) +#define WL12XX_SPARE_B4 (REGISTERS_BASE + 0x542C) +#define WL12XX_SPARE_B5 (REGISTERS_BASE + 0x5430) +#define WL12XX_SPARE_B6 (REGISTERS_BASE + 0x5434) +#define WL12XX_SPARE_B7 (REGISTERS_BASE + 0x5438) +#define WL12XX_SPARE_B8 (REGISTERS_BASE + 0x543C) + +#define WL12XX_PLL_PARAMETERS (REGISTERS_BASE + 0x6040) +#define WL12XX_WU_COUNTER_PAUSE (REGISTERS_BASE + 0x6008) +#define WL12XX_WELP_ARM_COMMAND (REGISTERS_BASE + 0x6100) +#define WL12XX_DRPW_SCRATCH_START (DRPW_BASE + 0x002C) + +#define WL12XX_CMD_MBOX_ADDRESS 0x407B4 + +#define ACX_REG_EEPROM_START_BIT BIT(1) + +/* Command/Information Mailbox Pointers */ + +/*=============================================== + Command Mailbox Pointer - 32bit RW + ------------------------------------------ + This register holds the start address of + the command mailbox located in the Wlan hardware memory. + The host must read this pointer after a reset to + find the location of the command mailbox. + The Wlan hardware initializes the command mailbox + pointer with the default address of the command mailbox. + The command mailbox pointer is not valid until after + the host receives the Init Complete interrupt from + the Wlan hardware. + ===============================================*/ +#define WL12XX_REG_COMMAND_MAILBOX_PTR (WL12XX_SCR_PAD0) + +/*=============================================== + Information Mailbox Pointer - 32bit RW + ------------------------------------------ + This register holds the start address of + the information mailbox located in the Wlan hardware memory. + The host must read this pointer after a reset to find + the location of the information mailbox. + The Wlan hardware initializes the information mailbox pointer + with the default address of the information mailbox. + The information mailbox pointer is not valid + until after the host receives the Init Complete interrupt from + the Wlan hardware. + ===============================================*/ +#define WL12XX_REG_EVENT_MAILBOX_PTR (WL12XX_SCR_PAD1) + +/*=============================================== + EEPROM Read/Write Request 32bit RW + ------------------------------------------ + 1 EE_READ - EEPROM Read Request 1 - Setting this bit + loads a single byte of data into the EE_DATA + register from the EEPROM location specified in + the EE_ADDR register. + The Wlan hardware hardware clears this bit automatically. + EE_DATA is valid when this bit is cleared. + + 0 EE_WRITE - EEPROM Write Request - Setting this bit + writes a single byte of data from the EE_DATA register into the + EEPROM location specified in the EE_ADDR register. + The Wlan hardware hardware clears this bit automatically. +*===============================================*/ +#define ACX_EE_CTL_REG EE_CTL +#define EE_WRITE 0x00000001ul +#define EE_READ 0x00000002ul + +/*=============================================== + EEPROM Address - 32bit RW + ------------------------------------------ + This register specifies the address + within the EEPROM from/to which to read/write data. + ===============================================*/ +#define ACX_EE_ADDR_REG EE_ADDR + +/*=============================================== + EEPROM Data - 32bit RW + ------------------------------------------ + This register either holds the read 8 bits of + data from the EEPROM or the write data + to be written to the EEPROM. + ===============================================*/ +#define ACX_EE_DATA_REG EE_DATA + +/*=============================================== + EEPROM Base Address - 32bit RW + ------------------------------------------ + This register holds the upper nine bits + [23:15] of the 24-bit Wlan hardware memory + address for burst reads from EEPROM accesses. + The EEPROM provides the lower 15 bits of this address. + The MSB of the address from the EEPROM is ignored. + ===============================================*/ +#define ACX_EE_CFG EE_CFG + +/*=============================================== + GPIO Output Values -32bit, RW + ------------------------------------------ + [31:16] Reserved + [15: 0] Specify the output values (at the output driver inputs) for + GPIO[15:0], respectively. + ===============================================*/ +#define ACX_GPIO_OUT_REG GPIO_OUT +#define ACX_MAX_GPIO_LINES 15 + +/*=============================================== + Contention window -32bit, RW + ------------------------------------------ + [31:26] Reserved + [25:16] Max (0x3ff) + [15:07] Reserved + [06:00] Current contention window value - default is 0x1F + ===============================================*/ +#define ACX_CONT_WIND_CFG_REG CONT_WIND_CFG +#define ACX_CONT_WIND_MIN_MASK 0x0000007f +#define ACX_CONT_WIND_MAX 0x03ff0000 + +#define REF_FREQ_19_2 0 +#define REF_FREQ_26_0 1 +#define REF_FREQ_38_4 2 +#define REF_FREQ_40_0 3 +#define REF_FREQ_33_6 4 +#define REF_FREQ_NUM 5 + +#define LUT_PARAM_INTEGER_DIVIDER 0 +#define LUT_PARAM_FRACTIONAL_DIVIDER 1 +#define LUT_PARAM_ATTN_BB 2 +#define LUT_PARAM_ALPHA_BB 3 +#define LUT_PARAM_STOP_TIME_BB 4 +#define LUT_PARAM_BB_PLL_LOOP_FILTER 5 +#define LUT_PARAM_NUM 6 + +#define WL12XX_EEPROMLESS_IND (WL12XX_SCR_PAD4) +#define USE_EEPROM 0 +#define NVS_DATA_BUNDARY_ALIGNMENT 4 + +/* Firmware image header size */ +#define FW_HDR_SIZE 8 + +/****************************************************************************** + + CHANNELS, BAND & REG DOMAINS definitions + +******************************************************************************/ + +#define SHORT_PREAMBLE_BIT BIT(0) /* CCK or Barker depending on the rate */ +#define OFDM_RATE_BIT BIT(6) +#define PBCC_RATE_BIT BIT(7) + +enum { + CCK_LONG = 0, + CCK_SHORT = SHORT_PREAMBLE_BIT, + PBCC_LONG = PBCC_RATE_BIT, + PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT, + OFDM = OFDM_RATE_BIT +}; + +/****************************************************************************** + +Transmit-Descriptor RATE-SET field definitions... + +Define a new "Rate-Set" for TX path that incorporates the +Rate & Modulation info into a single 16-bit field. + +TxdRateSet_t: +b15 - Indicates Preamble type (1=SHORT, 0=LONG). + Notes: + Must be LONG (0) for 1Mbps rate. + Does not apply (set to 0) for RevG-OFDM rates. +b14 - Indicates PBCC encoding (1=PBCC, 0=not). + Notes: + Does not apply (set to 0) for rates 1 and 2 Mbps. + Does not apply (set to 0) for RevG-OFDM rates. +b13 - Unused (set to 0). +b12-b0 - Supported Rate indicator bits as defined below. + +******************************************************************************/ + +#define OCP_CMD_LOOP 32 +#define OCP_CMD_WRITE 0x1 +#define OCP_CMD_READ 0x2 +#define OCP_READY_MASK BIT(18) +#define OCP_STATUS_MASK (BIT(16) | BIT(17)) +#define OCP_STATUS_NO_RESP 0x00000 +#define OCP_STATUS_OK 0x10000 +#define OCP_STATUS_REQ_FAILED 0x20000 +#define OCP_STATUS_RESP_ERROR 0x30000 + +#define OCP_REG_POLARITY 0x0064 +#define OCP_REG_CLK_TYPE 0x0448 +#define OCP_REG_CLK_POLARITY 0x0cb2 +#define OCP_REG_CLK_PULL 0x0cb4 + +#define POLARITY_LOW BIT(1) +#define NO_PULL (BIT(14) | BIT(15)) + +#define FREF_CLK_TYPE_BITS 0xfffffe7f +#define CLK_REQ_PRCM 0x100 +#define FREF_CLK_POLARITY_BITS 0xfffff8ff +#define CLK_REQ_OUTN_SEL 0x700 + +#define WU_COUNTER_PAUSE_VAL 0x3FF + +/* PLL configuration algorithm for wl128x */ +#define SYS_CLK_CFG_REG 0x2200 +/* Bit[0] - 0-TCXO, 1-FREF */ +#define MCS_PLL_CLK_SEL_FREF BIT(0) +/* Bit[3:2] - 01-TCXO, 10-FREF */ +#define WL_CLK_REQ_TYPE_FREF BIT(3) +#define WL_CLK_REQ_TYPE_PG2 (BIT(3) | BIT(2)) +/* Bit[4] - 0-TCXO, 1-FREF */ +#define PRCM_CM_EN_MUX_WLAN_FREF BIT(4) + +#define TCXO_ILOAD_INT_REG 0x2264 +#define TCXO_CLK_DETECT_REG 0x2266 + +#define TCXO_DET_FAILED BIT(4) + +#define FREF_ILOAD_INT_REG 0x2084 +#define FREF_CLK_DETECT_REG 0x2086 +#define FREF_CLK_DETECT_FAIL BIT(4) + +/* Use this reg for masking during driver access */ +#define WL_SPARE_REG 0x2320 +#define WL_SPARE_VAL BIT(2) +/* Bit[6:5:3] - mask wl write SYS_CLK_CFG[8:5:2:4] */ +#define WL_SPARE_MASK_8526 (BIT(6) | BIT(5) | BIT(3)) + +#define PLL_LOCK_COUNTERS_REG 0xD8C +#define PLL_LOCK_COUNTERS_COEX 0x0F +#define PLL_LOCK_COUNTERS_MCS 0xF0 +#define MCS_PLL_OVERRIDE_REG 0xD90 +#define MCS_PLL_CONFIG_REG 0xD92 +#define MCS_SEL_IN_FREQ_MASK 0x0070 +#define MCS_SEL_IN_FREQ_SHIFT 4 +#define MCS_PLL_CONFIG_REG_VAL 0x73 +#define MCS_PLL_ENABLE_HP (BIT(0) | BIT(1)) + +#define MCS_PLL_M_REG 0xD94 +#define MCS_PLL_N_REG 0xD96 +#define MCS_PLL_M_REG_VAL 0xC8 +#define MCS_PLL_N_REG_VAL 0x07 + +#define SDIO_IO_DS 0xd14 + +/* SDIO/wSPI DS configuration values */ +enum { + HCI_IO_DS_8MA = 0, + HCI_IO_DS_4MA = 1, /* default */ + HCI_IO_DS_6MA = 2, + HCI_IO_DS_2MA = 3, +}; + +/* end PLL configuration algorithm for wl128x */ + +/* + * Host Command Interrupt. Setting this bit masks + * the interrupt that the host issues to inform + * the FW that it has sent a command + * to the Wlan hardware Command Mailbox. + */ +#define WL12XX_INTR_TRIG_CMD BIT(0) + +/* + * Host Event Acknowlegde Interrupt. The host + * sets this bit to acknowledge that it received + * the unsolicited information from the event + * mailbox. + */ +#define WL12XX_INTR_TRIG_EVENT_ACK BIT(1) + +/*=============================================== + HI_CFG Interface Configuration Register Values + ------------------------------------------ + ===============================================*/ +#define HI_CFG_UART_ENABLE 0x00000004 +#define HI_CFG_RST232_ENABLE 0x00000008 +#define HI_CFG_CLOCK_REQ_SELECT 0x00000010 +#define HI_CFG_HOST_INT_ENABLE 0x00000020 +#define HI_CFG_VLYNQ_OUTPUT_ENABLE 0x00000040 +#define HI_CFG_HOST_INT_ACTIVE_LOW 0x00000080 +#define HI_CFG_UART_TX_OUT_GPIO_15 0x00000100 +#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200 +#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400 + +#define HI_CFG_DEF_VAL \ + (HI_CFG_UART_ENABLE | \ + HI_CFG_RST232_ENABLE | \ + HI_CFG_CLOCK_REQ_SELECT | \ + HI_CFG_HOST_INT_ENABLE) + +#define WL127X_REG_FUSE_DATA_2_1 0x050a +#define WL128X_REG_FUSE_DATA_2_1 0x2152 +#define PG_VER_MASK 0x3c +#define PG_VER_OFFSET 2 + +#define WL127X_PG_MAJOR_VER_MASK 0x3 +#define WL127X_PG_MAJOR_VER_OFFSET 0x0 +#define WL127X_PG_MINOR_VER_MASK 0xc +#define WL127X_PG_MINOR_VER_OFFSET 0x2 + +#define WL128X_PG_MAJOR_VER_MASK 0xc +#define WL128X_PG_MAJOR_VER_OFFSET 0x2 +#define WL128X_PG_MINOR_VER_MASK 0x3 +#define WL128X_PG_MINOR_VER_OFFSET 0x0 + +#define WL127X_PG_GET_MAJOR(pg_ver) ((pg_ver & WL127X_PG_MAJOR_VER_MASK) >> \ + WL127X_PG_MAJOR_VER_OFFSET) +#define WL127X_PG_GET_MINOR(pg_ver) ((pg_ver & WL127X_PG_MINOR_VER_MASK) >> \ + WL127X_PG_MINOR_VER_OFFSET) +#define WL128X_PG_GET_MAJOR(pg_ver) ((pg_ver & WL128X_PG_MAJOR_VER_MASK) >> \ + WL128X_PG_MAJOR_VER_OFFSET) +#define WL128X_PG_GET_MINOR(pg_ver) ((pg_ver & WL128X_PG_MINOR_VER_MASK) >> \ + WL128X_PG_MINOR_VER_OFFSET) + +#define WL12XX_REG_FUSE_BD_ADDR_1 0x00310eb4 +#define WL12XX_REG_FUSE_BD_ADDR_2 0x00310eb8 + +#endif diff --git a/drivers/net/wireless/ti/wl12xx/scan.c b/drivers/net/wireless/ti/wl12xx/scan.c new file mode 100644 index 000000000..0c0d5cd98 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/scan.c @@ -0,0 +1,507 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/ieee80211.h> +#include "scan.h" +#include "../wlcore/debug.h" +#include "../wlcore/tx.h" + +static int wl1271_get_scan_channels(struct wl1271 *wl, + struct cfg80211_scan_request *req, + struct basic_scan_channel_params *channels, + enum ieee80211_band band, bool passive) +{ + struct conf_scan_settings *c = &wl->conf.scan; + int i, j; + u32 flags; + + for (i = 0, j = 0; + i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; + i++) { + flags = req->channels[i]->flags; + + if (!test_bit(i, wl->scan.scanned_ch) && + !(flags & IEEE80211_CHAN_DISABLED) && + (req->channels[i]->band == band) && + /* + * In passive scans, we scan all remaining + * channels, even if not marked as such. + * In active scans, we only scan channels not + * marked as passive. + */ + (passive || !(flags & IEEE80211_CHAN_NO_IR))) { + wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", + req->channels[i]->band, + req->channels[i]->center_freq); + wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", + req->channels[i]->hw_value, + req->channels[i]->flags); + wl1271_debug(DEBUG_SCAN, + "max_antenna_gain %d, max_power %d", + req->channels[i]->max_antenna_gain, + req->channels[i]->max_power); + wl1271_debug(DEBUG_SCAN, "beacon_found %d", + req->channels[i]->beacon_found); + + if (!passive) { + channels[j].min_duration = + cpu_to_le32(c->min_dwell_time_active); + channels[j].max_duration = + cpu_to_le32(c->max_dwell_time_active); + } else { + channels[j].min_duration = + cpu_to_le32(c->dwell_time_passive); + channels[j].max_duration = + cpu_to_le32(c->dwell_time_passive); + } + channels[j].early_termination = 0; + channels[j].tx_power_att = req->channels[i]->max_power; + channels[j].channel = req->channels[i]->hw_value; + + memset(&channels[j].bssid_lsb, 0xff, 4); + memset(&channels[j].bssid_msb, 0xff, 2); + + /* Mark the channels we already used */ + set_bit(i, wl->scan.scanned_ch); + + j++; + } + } + + return j; +} + +#define WL1271_NOTHING_TO_SCAN 1 + +static int wl1271_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, + enum ieee80211_band band, + bool passive, u32 basic_rate) +{ + struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); + struct wl1271_cmd_scan *cmd; + struct wl1271_cmd_trigger_scan_to *trigger; + int ret; + u16 scan_options = 0; + + /* skip active scans if we don't have SSIDs */ + if (!passive && wl->scan.req->n_ssids == 0) + return WL1271_NOTHING_TO_SCAN; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); + if (!cmd || !trigger) { + ret = -ENOMEM; + goto out; + } + + if (wl->conf.scan.split_scan_timeout) + scan_options |= WL1271_SCAN_OPT_SPLIT_SCAN; + + if (passive) + scan_options |= WL1271_SCAN_OPT_PASSIVE; + + cmd->params.role_id = wlvif->role_id; + + if (WARN_ON(cmd->params.role_id == WL12XX_INVALID_ROLE_ID)) { + ret = -EINVAL; + goto out; + } + + cmd->params.scan_options = cpu_to_le16(scan_options); + + cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, + cmd->channels, + band, passive); + if (cmd->params.n_ch == 0) { + ret = WL1271_NOTHING_TO_SCAN; + goto out; + } + + cmd->params.tx_rate = cpu_to_le32(basic_rate); + cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs; + cmd->params.tid_trigger = CONF_TX_AC_ANY_TID; + cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; + + if (band == IEEE80211_BAND_2GHZ) + cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; + else + cmd->params.band = WL1271_SCAN_BAND_5_GHZ; + + if (wl->scan.ssid_len && wl->scan.ssid) { + cmd->params.ssid_len = wl->scan.ssid_len; + memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); + } + + memcpy(cmd->addr, vif->addr, ETH_ALEN); + + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + cmd->params.role_id, band, + wl->scan.ssid, wl->scan.ssid_len, + wl->scan.req->ie, + wl->scan.req->ie_len, NULL, 0, false); + if (ret < 0) { + wl1271_error("PROBE request template failed"); + goto out; + } + + trigger->timeout = cpu_to_le32(wl->conf.scan.split_scan_timeout); + ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, + sizeof(*trigger), 0); + if (ret < 0) { + wl1271_error("trigger scan to failed for hw scan"); + goto out; + } + + wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); + + ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("SCAN failed"); + goto out; + } + +out: + kfree(cmd); + kfree(trigger); + return ret; +} + +int wl12xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + struct wl1271_cmd_header *cmd = NULL; + int ret = 0; + + if (WARN_ON(wl->scan.state == WL1271_SCAN_STATE_IDLE)) + return -EINVAL; + + wl1271_debug(DEBUG_CMD, "cmd scan stop"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, cmd, + sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("cmd stop_scan failed"); + goto out; + } +out: + kfree(cmd); + return ret; +} + +void wl1271_scan_stm(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + int ret = 0; + enum ieee80211_band band; + u32 rate, mask; + + switch (wl->scan.state) { + case WL1271_SCAN_STATE_IDLE: + break; + + case WL1271_SCAN_STATE_2GHZ_ACTIVE: + band = IEEE80211_BAND_2GHZ; + mask = wlvif->bitrate_masks[band]; + if (wl->scan.req->no_cck) { + mask &= ~CONF_TX_CCK_RATES; + if (!mask) + mask = CONF_TX_RATE_MASK_BASIC_P2P; + } + rate = wl1271_tx_min_rate_get(wl, mask); + ret = wl1271_scan_send(wl, wlvif, band, false, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_2GHZ_PASSIVE: + band = IEEE80211_BAND_2GHZ; + mask = wlvif->bitrate_masks[band]; + if (wl->scan.req->no_cck) { + mask &= ~CONF_TX_CCK_RATES; + if (!mask) + mask = CONF_TX_RATE_MASK_BASIC_P2P; + } + rate = wl1271_tx_min_rate_get(wl, mask); + ret = wl1271_scan_send(wl, wlvif, band, true, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + if (wl->enable_11a) + wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; + else + wl->scan.state = WL1271_SCAN_STATE_DONE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_5GHZ_ACTIVE: + band = IEEE80211_BAND_5GHZ; + rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); + ret = wl1271_scan_send(wl, wlvif, band, false, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_5GHZ_PASSIVE: + band = IEEE80211_BAND_5GHZ; + rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); + ret = wl1271_scan_send(wl, wlvif, band, true, rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_DONE; + wl1271_scan_stm(wl, wlvif); + } + + break; + + case WL1271_SCAN_STATE_DONE: + wl->scan.failed = false; + cancel_delayed_work(&wl->scan_complete_work); + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(0)); + break; + + default: + wl1271_error("invalid scan state"); + break; + } + + if (ret < 0) { + cancel_delayed_work(&wl->scan_complete_work); + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(0)); + } +} + +static void wl12xx_adjust_channels(struct wl1271_cmd_sched_scan_config *cmd, + struct wlcore_scan_channels *cmd_channels) +{ + memcpy(cmd->passive, cmd_channels->passive, sizeof(cmd->passive)); + memcpy(cmd->active, cmd_channels->active, sizeof(cmd->active)); + cmd->dfs = cmd_channels->dfs; + cmd->n_pactive_ch = cmd_channels->passive_active; + + memcpy(cmd->channels_2, cmd_channels->channels_2, + sizeof(cmd->channels_2)); + memcpy(cmd->channels_5, cmd_channels->channels_5, + sizeof(cmd->channels_5)); + /* channels_4 are not supported, so no need to copy them */ +} + +int wl1271_scan_sched_scan_config(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_scan_ies *ies) +{ + struct wl1271_cmd_sched_scan_config *cfg = NULL; + struct wlcore_scan_channels *cfg_channels = NULL; + struct conf_sched_scan_settings *c = &wl->conf.sched_scan; + int i, ret; + bool force_passive = !req->n_ssids; + + wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); + + cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return -ENOMEM; + + cfg->role_id = wlvif->role_id; + cfg->rssi_threshold = c->rssi_threshold; + cfg->snr_threshold = c->snr_threshold; + cfg->n_probe_reqs = c->num_probe_reqs; + /* cycles set to 0 it means infinite (until manually stopped) */ + cfg->cycles = 0; + /* report APs when at least 1 is found */ + cfg->report_after = 1; + /* don't stop scanning automatically when something is found */ + cfg->terminate = 0; + cfg->tag = WL1271_SCAN_DEFAULT_TAG; + /* don't filter on BSS type */ + cfg->bss_type = SCAN_BSS_TYPE_ANY; + /* currently NL80211 supports only a single interval */ + for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) + cfg->intervals[i] = cpu_to_le32(req->interval); + + cfg->ssid_len = 0; + ret = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req); + if (ret < 0) + goto out; + + cfg->filter_type = ret; + + wl1271_debug(DEBUG_SCAN, "filter_type = %d", cfg->filter_type); + + cfg_channels = kzalloc(sizeof(*cfg_channels), GFP_KERNEL); + if (!cfg_channels) { + ret = -ENOMEM; + goto out; + } + + if (!wlcore_set_scan_chan_params(wl, cfg_channels, req->channels, + req->n_channels, req->n_ssids, + SCAN_TYPE_PERIODIC)) { + wl1271_error("scan channel list is empty"); + ret = -EINVAL; + goto out; + } + wl12xx_adjust_channels(cfg, cfg_channels); + + if (!force_passive && cfg->active[0]) { + u8 band = IEEE80211_BAND_2GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + wlvif->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + ies->ies[band], + ies->len[band], + ies->common_ies, + ies->common_ie_len, + true); + if (ret < 0) { + wl1271_error("2.4GHz PROBE request template failed"); + goto out; + } + } + + if (!force_passive && cfg->active[1]) { + u8 band = IEEE80211_BAND_5GHZ; + ret = wl12xx_cmd_build_probe_req(wl, wlvif, + wlvif->role_id, band, + req->ssids[0].ssid, + req->ssids[0].ssid_len, + ies->ies[band], + ies->len[band], + ies->common_ies, + ies->common_ie_len, + true); + if (ret < 0) { + wl1271_error("5GHz PROBE request template failed"); + goto out; + } + } + + wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg)); + + ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg, + sizeof(*cfg), 0); + if (ret < 0) { + wl1271_error("SCAN configuration failed"); + goto out; + } +out: + kfree(cfg_channels); + kfree(cfg); + return ret; +} + +int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + struct wl1271_cmd_sched_scan_start *start; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd periodic scan start"); + + if (wlvif->bss_type != BSS_TYPE_STA_BSS) + return -EOPNOTSUPP; + + if ((wl->quirks & WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN) && + test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags)) + return -EBUSY; + + start = kzalloc(sizeof(*start), GFP_KERNEL); + if (!start) + return -ENOMEM; + + start->role_id = wlvif->role_id; + start->tag = WL1271_SCAN_DEFAULT_TAG; + + ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start, + sizeof(*start), 0); + if (ret < 0) { + wl1271_error("failed to send scan start command"); + goto out_free; + } + +out_free: + kfree(start); + return ret; +} + +int wl12xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_scan_ies *ies) +{ + int ret; + + ret = wl1271_scan_sched_scan_config(wl, wlvif, req, ies); + if (ret < 0) + return ret; + + return wl1271_scan_sched_scan_start(wl, wlvif); +} + +void wl12xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + struct wl1271_cmd_sched_scan_stop *stop; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); + + /* FIXME: what to do if alloc'ing to stop fails? */ + stop = kzalloc(sizeof(*stop), GFP_KERNEL); + if (!stop) { + wl1271_error("failed to alloc memory to send sched scan stop"); + return; + } + + stop->role_id = wlvif->role_id; + stop->tag = WL1271_SCAN_DEFAULT_TAG; + + ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop, + sizeof(*stop), 0); + if (ret < 0) { + wl1271_error("failed to send sched scan stop command"); + goto out_free; + } + +out_free: + kfree(stop); +} + +int wl12xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req) +{ + wl1271_scan_stm(wl, wlvif); + return 0; +} + +void wl12xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif) +{ + wl1271_scan_stm(wl, wlvif); +} diff --git a/drivers/net/wireless/ti/wl12xx/scan.h b/drivers/net/wireless/ti/wl12xx/scan.h new file mode 100644 index 000000000..427f9af85 --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/scan.h @@ -0,0 +1,140 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2012 Texas Instruments. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_SCAN_H__ +#define __WL12XX_SCAN_H__ + +#include "../wlcore/wlcore.h" +#include "../wlcore/cmd.h" +#include "../wlcore/scan.h" + +#define WL12XX_MAX_CHANNELS_5GHZ 23 + +struct basic_scan_params { + /* Scan option flags (WL1271_SCAN_OPT_*) */ + __le16 scan_options; + u8 role_id; + /* Number of scan channels in the list (maximum 30) */ + u8 n_ch; + /* This field indicates the number of probe requests to send + per channel for an active scan */ + u8 n_probe_reqs; + u8 tid_trigger; + u8 ssid_len; + u8 use_ssid_list; + + /* Rate bit field for sending the probes */ + __le32 tx_rate; + + u8 ssid[IEEE80211_MAX_SSID_LEN]; + /* Band to scan */ + u8 band; + + u8 scan_tag; + u8 padding2[2]; +} __packed; + +struct basic_scan_channel_params { + /* Duration in TU to wait for frames on a channel for active scan */ + __le32 min_duration; + __le32 max_duration; + __le32 bssid_lsb; + __le16 bssid_msb; + u8 early_termination; + u8 tx_power_att; + u8 channel; + /* FW internal use only! */ + u8 dfs_candidate; + u8 activity_detected; + u8 pad; +} __packed; + +struct wl1271_cmd_scan { + struct wl1271_cmd_header header; + + struct basic_scan_params params; + struct basic_scan_channel_params channels[WL1271_SCAN_MAX_CHANNELS]; + + /* src mac address */ + u8 addr[ETH_ALEN]; + u8 padding[2]; +} __packed; + +struct wl1271_cmd_sched_scan_config { + struct wl1271_cmd_header header; + + __le32 intervals[SCAN_MAX_CYCLE_INTERVALS]; + + s8 rssi_threshold; /* for filtering (in dBm) */ + s8 snr_threshold; /* for filtering (in dB) */ + + u8 cycles; /* maximum number of scan cycles */ + u8 report_after; /* report when this number of results are received */ + u8 terminate; /* stop scanning after reporting */ + + u8 tag; + u8 bss_type; /* for filtering */ + u8 filter_type; + + u8 ssid_len; /* For SCAN_SSID_FILTER_SPECIFIC */ + u8 ssid[IEEE80211_MAX_SSID_LEN]; + + u8 n_probe_reqs; /* Number of probes requests per channel */ + + u8 passive[SCAN_MAX_BANDS]; + u8 active[SCAN_MAX_BANDS]; + + u8 dfs; + + u8 n_pactive_ch; /* number of pactive (passive until fw detects energy) + channels in BG band */ + u8 role_id; + u8 padding[1]; + struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; + struct conn_scan_ch_params channels_5[WL12XX_MAX_CHANNELS_5GHZ]; + struct conn_scan_ch_params channels_4[MAX_CHANNELS_4GHZ]; +} __packed; + +struct wl1271_cmd_sched_scan_start { + struct wl1271_cmd_header header; + + u8 tag; + u8 role_id; + u8 padding[2]; +} __packed; + +struct wl1271_cmd_sched_scan_stop { + struct wl1271_cmd_header header; + + u8 tag; + u8 role_id; + u8 padding[2]; +} __packed; + +int wl12xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_scan_request *req); +int wl12xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +void wl12xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl12xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_scan_ies *ies); +void wl12xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif); +#endif diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h new file mode 100644 index 000000000..5952e99ac --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h @@ -0,0 +1,163 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2011 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_PRIV_H__ +#define __WL12XX_PRIV_H__ + +#include "conf.h" + +/* WiLink 6/7 chip IDs */ +#define CHIP_ID_127X_PG10 (0x04030101) +#define CHIP_ID_127X_PG20 (0x04030111) +#define CHIP_ID_128X_PG10 (0x05030101) +#define CHIP_ID_128X_PG20 (0x05030111) + +/* FW chip version for wl127x */ +#define WL127X_CHIP_VER 6 +/* minimum single-role FW version for wl127x */ +#define WL127X_IFTYPE_SR_VER 3 +#define WL127X_MAJOR_SR_VER 10 +#define WL127X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE +#define WL127X_MINOR_SR_VER 133 +/* minimum multi-role FW version for wl127x */ +#define WL127X_IFTYPE_MR_VER 5 +#define WL127X_MAJOR_MR_VER 7 +#define WL127X_SUBTYPE_MR_VER WLCORE_FW_VER_IGNORE +#define WL127X_MINOR_MR_VER 42 + +/* FW chip version for wl128x */ +#define WL128X_CHIP_VER 7 +/* minimum single-role FW version for wl128x */ +#define WL128X_IFTYPE_SR_VER 3 +#define WL128X_MAJOR_SR_VER 10 +#define WL128X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE +#define WL128X_MINOR_SR_VER 133 +/* minimum multi-role FW version for wl128x */ +#define WL128X_IFTYPE_MR_VER 5 +#define WL128X_MAJOR_MR_VER 7 +#define WL128X_SUBTYPE_MR_VER WLCORE_FW_VER_IGNORE +#define WL128X_MINOR_MR_VER 42 + +#define WL12XX_AGGR_BUFFER_SIZE (4 * PAGE_SIZE) + +#define WL12XX_NUM_TX_DESCRIPTORS 16 +#define WL12XX_NUM_RX_DESCRIPTORS 8 + +#define WL12XX_NUM_MAC_ADDRESSES 2 + +#define WL12XX_RX_BA_MAX_SESSIONS 3 + +#define WL12XX_MAX_AP_STATIONS 8 +#define WL12XX_MAX_LINKS 12 + +struct wl127x_rx_mem_pool_addr { + u32 addr; + u32 addr_extra; +}; + +struct wl12xx_priv { + struct wl12xx_priv_conf conf; + + int ref_clock; + int tcxo_clock; + + struct wl127x_rx_mem_pool_addr *rx_mem_addr; +}; + +/* Reference clock values */ +enum { + WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ + WL12XX_REFCLOCK_26 = 1, /* 26 MHz */ + WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */ + WL12XX_REFCLOCK_52 = 3, /* 52 MHz */ + WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */ + WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */ +}; + +/* TCXO clock values */ +enum { + WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */ + WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */ + WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */ + WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */ + WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */ + WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */ + WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */ + WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */ +}; + +struct wl12xx_clock { + u32 freq; + bool xtal; + u8 hw_idx; +}; + +struct wl12xx_fw_packet_counters { + /* Cumulative counter of released packets per AC */ + u8 tx_released_pkts[NUM_TX_QUEUES]; + + /* Cumulative counter of freed packets per HLID */ + u8 tx_lnk_free_pkts[WL12XX_MAX_LINKS]; + + /* Cumulative counter of released Voice memory blocks */ + u8 tx_voice_released_blks; + + /* Tx rate of the last transmitted packet */ + u8 tx_last_rate; + + u8 padding[2]; +} __packed; + +/* FW status registers */ +struct wl12xx_fw_status { + __le32 intr; + u8 fw_rx_counter; + u8 drv_rx_counter; + u8 reserved; + u8 tx_results_counter; + __le32 rx_pkt_descs[WL12XX_NUM_RX_DESCRIPTORS]; + + __le32 fw_localtime; + + /* + * A bitmap (where each bit represents a single HLID) + * to indicate if the station is in PS mode. + */ + __le32 link_ps_bitmap; + + /* + * A bitmap (where each bit represents a single HLID) to indicate + * if the station is in Fast mode + */ + __le32 link_fast_bitmap; + + /* Cumulative counter of total released mem blocks since FW-reset */ + __le32 total_released_blks; + + /* Size (in Memory Blocks) of TX pool */ + __le32 tx_total; + + struct wl12xx_fw_packet_counters counters; + + __le32 log_start_addr; +} __packed; + +#endif /* __WL12XX_PRIV_H__ */ |