diff options
Diffstat (limited to 'drivers/of')
29 files changed, 12102 insertions, 0 deletions
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig new file mode 100644 index 000000000..07bb3c8f1 --- /dev/null +++ b/drivers/of/Kconfig @@ -0,0 +1,100 @@ +config DTC + bool + +config OF + bool + +menu "Device Tree and Open Firmware support" + depends on OF + +config OF_UNITTEST + bool "Device Tree runtime unit tests" + depends on OF_IRQ && OF_EARLY_FLATTREE + select OF_RESOLVE + help + This option builds in test cases for the device tree infrastructure + that are executed once at boot time, and the results dumped to the + console. + + If unsure, say N here, but this option is safe to enable. + +config OF_FLATTREE + bool + select DTC + select LIBFDT + select CRC32 + +config OF_EARLY_FLATTREE + bool + select OF_FLATTREE + +config OF_PROMTREE + bool + +# Hardly any platforms need this. It is safe to select, but only do so if you +# need it. +config OF_DYNAMIC + bool "Support for dynamic device trees" if OF_UNITTEST + help + On some platforms, the device tree can be manipulated at runtime. + While this option is selected automatically on such platforms, you + can enable it manually to improve device tree unit test coverage. + +config OF_ADDRESS + def_bool y + depends on !SPARC + select OF_ADDRESS_PCI if PCI + +config OF_ADDRESS_PCI + bool + +config OF_IRQ + def_bool y + depends on !SPARC && IRQ_DOMAIN + +config OF_NET + depends on NETDEVICES + def_bool y + +config OF_MDIO + def_tristate PHYLIB + depends on PHYLIB + help + OpenFirmware MDIO bus (Ethernet PHY) accessors + +config OF_PCI + def_tristate PCI + depends on PCI + help + OpenFirmware PCI bus accessors + +config OF_PCI_IRQ + def_tristate PCI + depends on OF_PCI && OF_IRQ + help + OpenFirmware PCI IRQ routing helpers + +config OF_MTD + depends on MTD + def_bool y + +config OF_RESERVED_MEM + depends on OF_EARLY_FLATTREE + bool + help + Helpers to allow for reservation of memory regions + +config OF_RESOLVE + bool + +config OF_OVERLAY + bool "Device Tree overlays" + select OF_DYNAMIC + select OF_RESOLVE + help + Overlays are a method to dynamically modify part of the kernel's + device tree with dynamically loaded data. + While this option is selected automatically when needed, you can + enable it manually to improve device tree unit test coverage. + +endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile new file mode 100644 index 000000000..fcacb186a --- /dev/null +++ b/drivers/of/Makefile @@ -0,0 +1,21 @@ +obj-y = base.o device.o platform.o +obj-$(CONFIG_OF_DYNAMIC) += dynamic.o +obj-$(CONFIG_OF_FLATTREE) += fdt.o +obj-$(CONFIG_OF_EARLY_FLATTREE) += fdt_address.o +obj-$(CONFIG_OF_PROMTREE) += pdt.o +obj-$(CONFIG_OF_ADDRESS) += address.o +obj-$(CONFIG_OF_IRQ) += irq.o +obj-$(CONFIG_OF_NET) += of_net.o +obj-$(CONFIG_OF_UNITTEST) += unittest.o +obj-$(CONFIG_OF_MDIO) += of_mdio.o +obj-$(CONFIG_OF_PCI) += of_pci.o +obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o +obj-$(CONFIG_OF_MTD) += of_mtd.o +obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o +obj-$(CONFIG_OF_RESOLVE) += resolver.o +obj-$(CONFIG_OF_OVERLAY) += overlay.o + +obj-$(CONFIG_OF_UNITTEST) += unittest-data/ + +CFLAGS_fdt.o = -I$(src)/../../scripts/dtc/libfdt +CFLAGS_fdt_address.o = -I$(src)/../../scripts/dtc/libfdt diff --git a/drivers/of/address.c b/drivers/of/address.c new file mode 100644 index 000000000..8bfda6ade --- /dev/null +++ b/drivers/of/address.c @@ -0,0 +1,1021 @@ + +#include <linux/device.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/pci_regs.h> +#include <linux/sizes.h> +#include <linux/slab.h> +#include <linux/string.h> + +/* Max address size we deal with */ +#define OF_MAX_ADDR_CELLS 4 +#define OF_CHECK_ADDR_COUNT(na) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS) +#define OF_CHECK_COUNTS(na, ns) (OF_CHECK_ADDR_COUNT(na) && (ns) > 0) + +static struct of_bus *of_match_bus(struct device_node *np); +static int __of_address_to_resource(struct device_node *dev, + const __be32 *addrp, u64 size, unsigned int flags, + const char *name, struct resource *r); + +/* Debug utility */ +#ifdef DEBUG +static void of_dump_addr(const char *s, const __be32 *addr, int na) +{ + printk(KERN_DEBUG "%s", s); + while (na--) + printk(" %08x", be32_to_cpu(*(addr++))); + printk("\n"); +} +#else +static void of_dump_addr(const char *s, const __be32 *addr, int na) { } +#endif + +/* Callbacks for bus specific translators */ +struct of_bus { + const char *name; + const char *addresses; + int (*match)(struct device_node *parent); + void (*count_cells)(struct device_node *child, + int *addrc, int *sizec); + u64 (*map)(__be32 *addr, const __be32 *range, + int na, int ns, int pna); + int (*translate)(__be32 *addr, u64 offset, int na); + unsigned int (*get_flags)(const __be32 *addr); +}; + +/* + * Default translator (generic bus) + */ + +static void of_bus_default_count_cells(struct device_node *dev, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = of_n_addr_cells(dev); + if (sizec) + *sizec = of_n_size_cells(dev); +} + +static u64 of_bus_default_map(__be32 *addr, const __be32 *range, + int na, int ns, int pna) +{ + u64 cp, s, da; + + cp = of_read_number(range, na); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr, na); + + pr_debug("OF: default map, cp=%llx, s=%llx, da=%llx\n", + (unsigned long long)cp, (unsigned long long)s, + (unsigned long long)da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_default_translate(__be32 *addr, u64 offset, int na) +{ + u64 a = of_read_number(addr, na); + memset(addr, 0, na * 4); + a += offset; + if (na > 1) + addr[na - 2] = cpu_to_be32(a >> 32); + addr[na - 1] = cpu_to_be32(a & 0xffffffffu); + + return 0; +} + +static unsigned int of_bus_default_get_flags(const __be32 *addr) +{ + return IORESOURCE_MEM; +} + +#ifdef CONFIG_OF_ADDRESS_PCI +/* + * PCI bus specific translator + */ + +static int of_bus_pci_match(struct device_node *np) +{ + /* + * "pciex" is PCI Express + * "vci" is for the /chaos bridge on 1st-gen PCI powermacs + * "ht" is hypertransport + */ + return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex") || + !strcmp(np->type, "vci") || !strcmp(np->type, "ht"); +} + +static void of_bus_pci_count_cells(struct device_node *np, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = 3; + if (sizec) + *sizec = 2; +} + +static unsigned int of_bus_pci_get_flags(const __be32 *addr) +{ + unsigned int flags = 0; + u32 w = be32_to_cpup(addr); + + switch((w >> 24) & 0x03) { + case 0x01: + flags |= IORESOURCE_IO; + break; + case 0x02: /* 32 bits */ + case 0x03: /* 64 bits */ + flags |= IORESOURCE_MEM; + break; + } + if (w & 0x40000000) + flags |= IORESOURCE_PREFETCH; + return flags; +} + +static u64 of_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns, + int pna) +{ + u64 cp, s, da; + unsigned int af, rf; + + af = of_bus_pci_get_flags(addr); + rf = of_bus_pci_get_flags(range); + + /* Check address type match */ + if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO)) + return OF_BAD_ADDR; + + /* Read address values, skipping high cell */ + cp = of_read_number(range + 1, na - 1); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr + 1, na - 1); + + pr_debug("OF: PCI map, cp=%llx, s=%llx, da=%llx\n", + (unsigned long long)cp, (unsigned long long)s, + (unsigned long long)da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_pci_translate(__be32 *addr, u64 offset, int na) +{ + return of_bus_default_translate(addr + 1, offset, na - 1); +} +#endif /* CONFIG_OF_ADDRESS_PCI */ + +#ifdef CONFIG_PCI +const __be32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, + unsigned int *flags) +{ + const __be32 *prop; + unsigned int psize; + struct device_node *parent; + struct of_bus *bus; + int onesize, i, na, ns; + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + return NULL; + bus = of_match_bus(parent); + if (strcmp(bus->name, "pci")) { + of_node_put(parent); + return NULL; + } + bus->count_cells(dev, &na, &ns); + of_node_put(parent); + if (!OF_CHECK_ADDR_COUNT(na)) + return NULL; + + /* Get "reg" or "assigned-addresses" property */ + prop = of_get_property(dev, bus->addresses, &psize); + if (prop == NULL) + return NULL; + psize /= 4; + + onesize = na + ns; + for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) { + u32 val = be32_to_cpu(prop[0]); + if ((val & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { + if (size) + *size = of_read_number(prop + na, ns); + if (flags) + *flags = bus->get_flags(prop); + return prop; + } + } + return NULL; +} +EXPORT_SYMBOL(of_get_pci_address); + +int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r) +{ + const __be32 *addrp; + u64 size; + unsigned int flags; + + addrp = of_get_pci_address(dev, bar, &size, &flags); + if (addrp == NULL) + return -EINVAL; + return __of_address_to_resource(dev, addrp, size, flags, NULL, r); +} +EXPORT_SYMBOL_GPL(of_pci_address_to_resource); + +int of_pci_range_parser_init(struct of_pci_range_parser *parser, + struct device_node *node) +{ + const int na = 3, ns = 2; + int rlen; + + parser->node = node; + parser->pna = of_n_addr_cells(node); + parser->np = parser->pna + na + ns; + + parser->range = of_get_property(node, "ranges", &rlen); + if (parser->range == NULL) + return -ENOENT; + + parser->end = parser->range + rlen / sizeof(__be32); + + return 0; +} +EXPORT_SYMBOL_GPL(of_pci_range_parser_init); + +struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser, + struct of_pci_range *range) +{ + const int na = 3, ns = 2; + + if (!range) + return NULL; + + if (!parser->range || parser->range + parser->np > parser->end) + return NULL; + + range->pci_space = parser->range[0]; + range->flags = of_bus_pci_get_flags(parser->range); + range->pci_addr = of_read_number(parser->range + 1, ns); + range->cpu_addr = of_translate_address(parser->node, + parser->range + na); + range->size = of_read_number(parser->range + parser->pna + na, ns); + + parser->range += parser->np; + + /* Now consume following elements while they are contiguous */ + while (parser->range + parser->np <= parser->end) { + u32 flags, pci_space; + u64 pci_addr, cpu_addr, size; + + pci_space = be32_to_cpup(parser->range); + flags = of_bus_pci_get_flags(parser->range); + pci_addr = of_read_number(parser->range + 1, ns); + cpu_addr = of_translate_address(parser->node, + parser->range + na); + size = of_read_number(parser->range + parser->pna + na, ns); + + if (flags != range->flags) + break; + if (pci_addr != range->pci_addr + range->size || + cpu_addr != range->cpu_addr + range->size) + break; + + range->size += size; + parser->range += parser->np; + } + + return range; +} +EXPORT_SYMBOL_GPL(of_pci_range_parser_one); + +/* + * of_pci_range_to_resource - Create a resource from an of_pci_range + * @range: the PCI range that describes the resource + * @np: device node where the range belongs to + * @res: pointer to a valid resource that will be updated to + * reflect the values contained in the range. + * + * Returns EINVAL if the range cannot be converted to resource. + * + * Note that if the range is an IO range, the resource will be converted + * using pci_address_to_pio() which can fail if it is called too early or + * if the range cannot be matched to any host bridge IO space (our case here). + * To guard against that we try to register the IO range first. + * If that fails we know that pci_address_to_pio() will do too. + */ +int of_pci_range_to_resource(struct of_pci_range *range, + struct device_node *np, struct resource *res) +{ + int err; + res->flags = range->flags; + res->parent = res->child = res->sibling = NULL; + res->name = np->full_name; + + if (res->flags & IORESOURCE_IO) { + unsigned long port; + err = pci_register_io_range(range->cpu_addr, range->size); + if (err) + goto invalid_range; + port = pci_address_to_pio(range->cpu_addr); + if (port == (unsigned long)-1) { + err = -EINVAL; + goto invalid_range; + } + res->start = port; + } else { + res->start = range->cpu_addr; + } + res->end = res->start + range->size - 1; + return 0; + +invalid_range: + res->start = (resource_size_t)OF_BAD_ADDR; + res->end = (resource_size_t)OF_BAD_ADDR; + return err; +} +#endif /* CONFIG_PCI */ + +/* + * ISA bus specific translator + */ + +static int of_bus_isa_match(struct device_node *np) +{ + return !strcmp(np->name, "isa"); +} + +static void of_bus_isa_count_cells(struct device_node *child, + int *addrc, int *sizec) +{ + if (addrc) + *addrc = 2; + if (sizec) + *sizec = 1; +} + +static u64 of_bus_isa_map(__be32 *addr, const __be32 *range, int na, int ns, + int pna) +{ + u64 cp, s, da; + + /* Check address type match */ + if ((addr[0] ^ range[0]) & cpu_to_be32(1)) + return OF_BAD_ADDR; + + /* Read address values, skipping high cell */ + cp = of_read_number(range + 1, na - 1); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr + 1, na - 1); + + pr_debug("OF: ISA map, cp=%llx, s=%llx, da=%llx\n", + (unsigned long long)cp, (unsigned long long)s, + (unsigned long long)da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int of_bus_isa_translate(__be32 *addr, u64 offset, int na) +{ + return of_bus_default_translate(addr + 1, offset, na - 1); +} + +static unsigned int of_bus_isa_get_flags(const __be32 *addr) +{ + unsigned int flags = 0; + u32 w = be32_to_cpup(addr); + + if (w & 1) + flags |= IORESOURCE_IO; + else + flags |= IORESOURCE_MEM; + return flags; +} + +/* + * Array of bus specific translators + */ + +static struct of_bus of_busses[] = { +#ifdef CONFIG_OF_ADDRESS_PCI + /* PCI */ + { + .name = "pci", + .addresses = "assigned-addresses", + .match = of_bus_pci_match, + .count_cells = of_bus_pci_count_cells, + .map = of_bus_pci_map, + .translate = of_bus_pci_translate, + .get_flags = of_bus_pci_get_flags, + }, +#endif /* CONFIG_OF_ADDRESS_PCI */ + /* ISA */ + { + .name = "isa", + .addresses = "reg", + .match = of_bus_isa_match, + .count_cells = of_bus_isa_count_cells, + .map = of_bus_isa_map, + .translate = of_bus_isa_translate, + .get_flags = of_bus_isa_get_flags, + }, + /* Default */ + { + .name = "default", + .addresses = "reg", + .match = NULL, + .count_cells = of_bus_default_count_cells, + .map = of_bus_default_map, + .translate = of_bus_default_translate, + .get_flags = of_bus_default_get_flags, + }, +}; + +static struct of_bus *of_match_bus(struct device_node *np) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(of_busses); i++) + if (!of_busses[i].match || of_busses[i].match(np)) + return &of_busses[i]; + BUG(); + return NULL; +} + +static int of_empty_ranges_quirk(struct device_node *np) +{ + if (IS_ENABLED(CONFIG_PPC)) { + /* To save cycles, we cache the result for global "Mac" setting */ + static int quirk_state = -1; + + /* PA-SEMI sdc DT bug */ + if (of_device_is_compatible(np, "1682m-sdc")) + return true; + + /* Make quirk cached */ + if (quirk_state < 0) + quirk_state = + of_machine_is_compatible("Power Macintosh") || + of_machine_is_compatible("MacRISC"); + return quirk_state; + } + return false; +} + +static int of_translate_one(struct device_node *parent, struct of_bus *bus, + struct of_bus *pbus, __be32 *addr, + int na, int ns, int pna, const char *rprop) +{ + const __be32 *ranges; + unsigned int rlen; + int rone; + u64 offset = OF_BAD_ADDR; + + /* Normally, an absence of a "ranges" property means we are + * crossing a non-translatable boundary, and thus the addresses + * below the current not cannot be converted to CPU physical ones. + * Unfortunately, while this is very clear in the spec, it's not + * what Apple understood, and they do have things like /uni-n or + * /ht nodes with no "ranges" property and a lot of perfectly + * useable mapped devices below them. Thus we treat the absence of + * "ranges" as equivalent to an empty "ranges" property which means + * a 1:1 translation at that level. It's up to the caller not to try + * to translate addresses that aren't supposed to be translated in + * the first place. --BenH. + * + * As far as we know, this damage only exists on Apple machines, so + * This code is only enabled on powerpc. --gcl + */ + ranges = of_get_property(parent, rprop, &rlen); + if (ranges == NULL && !of_empty_ranges_quirk(parent)) { + pr_debug("OF: no ranges; cannot translate\n"); + return 1; + } + if (ranges == NULL || rlen == 0) { + offset = of_read_number(addr, na); + memset(addr, 0, pna * 4); + pr_debug("OF: empty ranges; 1:1 translation\n"); + goto finish; + } + + pr_debug("OF: walking ranges...\n"); + + /* Now walk through the ranges */ + rlen /= 4; + rone = na + pna + ns; + for (; rlen >= rone; rlen -= rone, ranges += rone) { + offset = bus->map(addr, ranges, na, ns, pna); + if (offset != OF_BAD_ADDR) + break; + } + if (offset == OF_BAD_ADDR) { + pr_debug("OF: not found !\n"); + return 1; + } + memcpy(addr, ranges + na, 4 * pna); + + finish: + of_dump_addr("OF: parent translation for:", addr, pna); + pr_debug("OF: with offset: %llx\n", (unsigned long long)offset); + + /* Translate it into parent bus space */ + return pbus->translate(addr, offset, pna); +} + +/* + * Translate an address from the device-tree into a CPU physical address, + * this walks up the tree and applies the various bus mappings on the + * way. + * + * Note: We consider that crossing any level with #size-cells == 0 to mean + * that translation is impossible (that is we are not dealing with a value + * that can be mapped to a cpu physical address). This is not really specified + * that way, but this is traditionally the way IBM at least do things + */ +static u64 __of_translate_address(struct device_node *dev, + const __be32 *in_addr, const char *rprop) +{ + struct device_node *parent = NULL; + struct of_bus *bus, *pbus; + __be32 addr[OF_MAX_ADDR_CELLS]; + int na, ns, pna, pns; + u64 result = OF_BAD_ADDR; + + pr_debug("OF: ** translation for device %s **\n", of_node_full_name(dev)); + + /* Increase refcount at current level */ + of_node_get(dev); + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + goto bail; + bus = of_match_bus(parent); + + /* Count address cells & copy address locally */ + bus->count_cells(dev, &na, &ns); + if (!OF_CHECK_COUNTS(na, ns)) { + pr_debug("OF: Bad cell count for %s\n", of_node_full_name(dev)); + goto bail; + } + memcpy(addr, in_addr, na * 4); + + pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n", + bus->name, na, ns, of_node_full_name(parent)); + of_dump_addr("OF: translating address:", addr, na); + + /* Translate */ + for (;;) { + /* Switch to parent bus */ + of_node_put(dev); + dev = parent; + parent = of_get_parent(dev); + + /* If root, we have finished */ + if (parent == NULL) { + pr_debug("OF: reached root node\n"); + result = of_read_number(addr, na); + break; + } + + /* Get new parent bus and counts */ + pbus = of_match_bus(parent); + pbus->count_cells(dev, &pna, &pns); + if (!OF_CHECK_COUNTS(pna, pns)) { + printk(KERN_ERR "prom_parse: Bad cell count for %s\n", + of_node_full_name(dev)); + break; + } + + pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n", + pbus->name, pna, pns, of_node_full_name(parent)); + + /* Apply bus translation */ + if (of_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop)) + break; + + /* Complete the move up one level */ + na = pna; + ns = pns; + bus = pbus; + + of_dump_addr("OF: one level translation:", addr, na); + } + bail: + of_node_put(parent); + of_node_put(dev); + + return result; +} + +u64 of_translate_address(struct device_node *dev, const __be32 *in_addr) +{ + return __of_translate_address(dev, in_addr, "ranges"); +} +EXPORT_SYMBOL(of_translate_address); + +u64 of_translate_dma_address(struct device_node *dev, const __be32 *in_addr) +{ + return __of_translate_address(dev, in_addr, "dma-ranges"); +} +EXPORT_SYMBOL(of_translate_dma_address); + +const __be32 *of_get_address(struct device_node *dev, int index, u64 *size, + unsigned int *flags) +{ + const __be32 *prop; + unsigned int psize; + struct device_node *parent; + struct of_bus *bus; + int onesize, i, na, ns; + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + return NULL; + bus = of_match_bus(parent); + bus->count_cells(dev, &na, &ns); + of_node_put(parent); + if (!OF_CHECK_ADDR_COUNT(na)) + return NULL; + + /* Get "reg" or "assigned-addresses" property */ + prop = of_get_property(dev, bus->addresses, &psize); + if (prop == NULL) + return NULL; + psize /= 4; + + onesize = na + ns; + for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) + if (i == index) { + if (size) + *size = of_read_number(prop + na, ns); + if (flags) + *flags = bus->get_flags(prop); + return prop; + } + return NULL; +} +EXPORT_SYMBOL(of_get_address); + +#ifdef PCI_IOBASE +struct io_range { + struct list_head list; + phys_addr_t start; + resource_size_t size; +}; + +static LIST_HEAD(io_range_list); +static DEFINE_SPINLOCK(io_range_lock); +#endif + +/* + * Record the PCI IO range (expressed as CPU physical address + size). + * Return a negative value if an error has occured, zero otherwise + */ +int __weak pci_register_io_range(phys_addr_t addr, resource_size_t size) +{ + int err = 0; + +#ifdef PCI_IOBASE + struct io_range *range; + resource_size_t allocated_size = 0; + + /* check if the range hasn't been previously recorded */ + spin_lock(&io_range_lock); + list_for_each_entry(range, &io_range_list, list) { + if (addr >= range->start && addr + size <= range->start + size) { + /* range already registered, bail out */ + goto end_register; + } + allocated_size += range->size; + } + + /* range not registed yet, check for available space */ + if (allocated_size + size - 1 > IO_SPACE_LIMIT) { + /* if it's too big check if 64K space can be reserved */ + if (allocated_size + SZ_64K - 1 > IO_SPACE_LIMIT) { + err = -E2BIG; + goto end_register; + } + + size = SZ_64K; + pr_warn("Requested IO range too big, new size set to 64K\n"); + } + + /* add the range to the list */ + range = kzalloc(sizeof(*range), GFP_ATOMIC); + if (!range) { + err = -ENOMEM; + goto end_register; + } + + range->start = addr; + range->size = size; + + list_add_tail(&range->list, &io_range_list); + +end_register: + spin_unlock(&io_range_lock); +#endif + + return err; +} + +phys_addr_t pci_pio_to_address(unsigned long pio) +{ + phys_addr_t address = (phys_addr_t)OF_BAD_ADDR; + +#ifdef PCI_IOBASE + struct io_range *range; + resource_size_t allocated_size = 0; + + if (pio > IO_SPACE_LIMIT) + return address; + + spin_lock(&io_range_lock); + list_for_each_entry(range, &io_range_list, list) { + if (pio >= allocated_size && pio < allocated_size + range->size) { + address = range->start + pio - allocated_size; + break; + } + allocated_size += range->size; + } + spin_unlock(&io_range_lock); +#endif + + return address; +} + +unsigned long __weak pci_address_to_pio(phys_addr_t address) +{ +#ifdef PCI_IOBASE + struct io_range *res; + resource_size_t offset = 0; + unsigned long addr = -1; + + spin_lock(&io_range_lock); + list_for_each_entry(res, &io_range_list, list) { + if (address >= res->start && address < res->start + res->size) { + addr = address - res->start + offset; + break; + } + offset += res->size; + } + spin_unlock(&io_range_lock); + + return addr; +#else + if (address > IO_SPACE_LIMIT) + return (unsigned long)-1; + + return (unsigned long) address; +#endif +} + +static int __of_address_to_resource(struct device_node *dev, + const __be32 *addrp, u64 size, unsigned int flags, + const char *name, struct resource *r) +{ + u64 taddr; + + if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0) + return -EINVAL; + taddr = of_translate_address(dev, addrp); + if (taddr == OF_BAD_ADDR) + return -EINVAL; + memset(r, 0, sizeof(struct resource)); + if (flags & IORESOURCE_IO) { + unsigned long port; + port = pci_address_to_pio(taddr); + if (port == (unsigned long)-1) + return -EINVAL; + r->start = port; + r->end = port + size - 1; + } else { + r->start = taddr; + r->end = taddr + size - 1; + } + r->flags = flags; + r->name = name ? name : dev->full_name; + + return 0; +} + +/** + * of_address_to_resource - Translate device tree address and return as resource + * + * Note that if your address is a PIO address, the conversion will fail if + * the physical address can't be internally converted to an IO token with + * pci_address_to_pio(), that is because it's either called to early or it + * can't be matched to any host bridge IO space + */ +int of_address_to_resource(struct device_node *dev, int index, + struct resource *r) +{ + const __be32 *addrp; + u64 size; + unsigned int flags; + const char *name = NULL; + + addrp = of_get_address(dev, index, &size, &flags); + if (addrp == NULL) + return -EINVAL; + + /* Get optional "reg-names" property to add a name to a resource */ + of_property_read_string_index(dev, "reg-names", index, &name); + + return __of_address_to_resource(dev, addrp, size, flags, name, r); +} +EXPORT_SYMBOL_GPL(of_address_to_resource); + +struct device_node *of_find_matching_node_by_address(struct device_node *from, + const struct of_device_id *matches, + u64 base_address) +{ + struct device_node *dn = of_find_matching_node(from, matches); + struct resource res; + + while (dn) { + if (of_address_to_resource(dn, 0, &res)) + continue; + if (res.start == base_address) + return dn; + dn = of_find_matching_node(dn, matches); + } + + return NULL; +} + + +/** + * of_iomap - Maps the memory mapped IO for a given device_node + * @device: the device whose io range will be mapped + * @index: index of the io range + * + * Returns a pointer to the mapped memory + */ +void __iomem *of_iomap(struct device_node *np, int index) +{ + struct resource res; + + if (of_address_to_resource(np, index, &res)) + return NULL; + + return ioremap(res.start, resource_size(&res)); +} +EXPORT_SYMBOL(of_iomap); + +/* + * of_io_request_and_map - Requests a resource and maps the memory mapped IO + * for a given device_node + * @device: the device whose io range will be mapped + * @index: index of the io range + * @name: name of the resource + * + * Returns a pointer to the requested and mapped memory or an ERR_PTR() encoded + * error code on failure. Usage example: + * + * base = of_io_request_and_map(node, 0, "foo"); + * if (IS_ERR(base)) + * return PTR_ERR(base); + */ +void __iomem *of_io_request_and_map(struct device_node *np, int index, + const char *name) +{ + struct resource res; + void __iomem *mem; + + if (of_address_to_resource(np, index, &res)) + return IOMEM_ERR_PTR(-EINVAL); + + if (!request_mem_region(res.start, resource_size(&res), name)) + return IOMEM_ERR_PTR(-EBUSY); + + mem = ioremap(res.start, resource_size(&res)); + if (!mem) { + release_mem_region(res.start, resource_size(&res)); + return IOMEM_ERR_PTR(-ENOMEM); + } + + return mem; +} +EXPORT_SYMBOL(of_io_request_and_map); + +/** + * of_dma_get_range - Get DMA range info + * @np: device node to get DMA range info + * @dma_addr: pointer to store initial DMA address of DMA range + * @paddr: pointer to store initial CPU address of DMA range + * @size: pointer to store size of DMA range + * + * Look in bottom up direction for the first "dma-ranges" property + * and parse it. + * dma-ranges format: + * DMA addr (dma_addr) : naddr cells + * CPU addr (phys_addr_t) : pna cells + * size : nsize cells + * + * It returns -ENODEV if "dma-ranges" property was not found + * for this device in DT. + */ +int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size) +{ + struct device_node *node = of_node_get(np); + const __be32 *ranges = NULL; + int len, naddr, nsize, pna; + int ret = 0; + u64 dmaaddr; + + if (!node) + return -EINVAL; + + while (1) { + naddr = of_n_addr_cells(node); + nsize = of_n_size_cells(node); + node = of_get_next_parent(node); + if (!node) + break; + + ranges = of_get_property(node, "dma-ranges", &len); + + /* Ignore empty ranges, they imply no translation required */ + if (ranges && len > 0) + break; + + /* + * At least empty ranges has to be defined for parent node if + * DMA is supported + */ + if (!ranges) + break; + } + + if (!ranges) { + pr_debug("%s: no dma-ranges found for node(%s)\n", + __func__, np->full_name); + ret = -ENODEV; + goto out; + } + + len /= sizeof(u32); + + pna = of_n_addr_cells(node); + + /* dma-ranges format: + * DMA addr : naddr cells + * CPU addr : pna cells + * size : nsize cells + */ + dmaaddr = of_read_number(ranges, naddr); + *paddr = of_translate_dma_address(np, ranges); + if (*paddr == OF_BAD_ADDR) { + pr_err("%s: translation of DMA address(%pad) to CPU address failed node(%s)\n", + __func__, dma_addr, np->full_name); + ret = -EINVAL; + goto out; + } + *dma_addr = dmaaddr; + + *size = of_read_number(ranges + naddr + pna, nsize); + + pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n", + *dma_addr, *paddr, *size); + +out: + of_node_put(node); + + return ret; +} +EXPORT_SYMBOL_GPL(of_dma_get_range); + +/** + * of_dma_is_coherent - Check if device is coherent + * @np: device node + * + * It returns true if "dma-coherent" property was found + * for this device in DT. + */ +bool of_dma_is_coherent(struct device_node *np) +{ + struct device_node *node = of_node_get(np); + + while (node) { + if (of_property_read_bool(node, "dma-coherent")) { + of_node_put(node); + return true; + } + node = of_get_next_parent(node); + } + of_node_put(node); + return false; +} +EXPORT_SYMBOL_GPL(of_dma_is_coherent); diff --git a/drivers/of/base.c b/drivers/of/base.c new file mode 100644 index 000000000..5ed97246c --- /dev/null +++ b/drivers/of/base.c @@ -0,0 +1,2276 @@ +/* + * Procedures for creating, accessing and interpreting the device tree. + * + * Paul Mackerras August 1996. + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. + * {engebret|bergner}@us.ibm.com + * + * Adapted for sparc and sparc64 by David S. Miller davem@davemloft.net + * + * Reconsolidated from arch/x/kernel/prom.c by Stephen Rothwell and + * Grant Likely. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/console.h> +#include <linux/ctype.h> +#include <linux/cpu.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_graph.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/proc_fs.h> + +#include "of_private.h" + +LIST_HEAD(aliases_lookup); + +struct device_node *of_root; +EXPORT_SYMBOL(of_root); +struct device_node *of_chosen; +struct device_node *of_aliases; +struct device_node *of_stdout; +static const char *of_stdout_options; + +struct kset *of_kset; + +/* + * Used to protect the of_aliases, to hold off addition of nodes to sysfs. + * This mutex must be held whenever modifications are being made to the + * device tree. The of_{attach,detach}_node() and + * of_{add,remove,update}_property() helpers make sure this happens. + */ +DEFINE_MUTEX(of_mutex); + +/* use when traversing tree through the child, sibling, + * or parent members of struct device_node. + */ +DEFINE_RAW_SPINLOCK(devtree_lock); + +int of_n_addr_cells(struct device_node *np) +{ + const __be32 *ip; + + do { + if (np->parent) + np = np->parent; + ip = of_get_property(np, "#address-cells", NULL); + if (ip) + return be32_to_cpup(ip); + } while (np->parent); + /* No #address-cells property for the root node */ + return OF_ROOT_NODE_ADDR_CELLS_DEFAULT; +} +EXPORT_SYMBOL(of_n_addr_cells); + +int of_n_size_cells(struct device_node *np) +{ + const __be32 *ip; + + do { + if (np->parent) + np = np->parent; + ip = of_get_property(np, "#size-cells", NULL); + if (ip) + return be32_to_cpup(ip); + } while (np->parent); + /* No #size-cells property for the root node */ + return OF_ROOT_NODE_SIZE_CELLS_DEFAULT; +} +EXPORT_SYMBOL(of_n_size_cells); + +#ifdef CONFIG_NUMA +int __weak of_node_to_nid(struct device_node *np) +{ + return NUMA_NO_NODE; +} +#endif + +#ifndef CONFIG_OF_DYNAMIC +static void of_node_release(struct kobject *kobj) +{ + /* Without CONFIG_OF_DYNAMIC, no nodes gets freed */ +} +#endif /* CONFIG_OF_DYNAMIC */ + +struct kobj_type of_node_ktype = { + .release = of_node_release, +}; + +static ssize_t of_node_property_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t offset, size_t count) +{ + struct property *pp = container_of(bin_attr, struct property, attr); + return memory_read_from_buffer(buf, count, &offset, pp->value, pp->length); +} + +static const char *safe_name(struct kobject *kobj, const char *orig_name) +{ + const char *name = orig_name; + struct kernfs_node *kn; + int i = 0; + + /* don't be a hero. After 16 tries give up */ + while (i < 16 && (kn = sysfs_get_dirent(kobj->sd, name))) { + sysfs_put(kn); + if (name != orig_name) + kfree(name); + name = kasprintf(GFP_KERNEL, "%s#%i", orig_name, ++i); + } + + if (name != orig_name) + pr_warn("device-tree: Duplicate name in %s, renamed to \"%s\"\n", + kobject_name(kobj), name); + return name; +} + +int __of_add_property_sysfs(struct device_node *np, struct property *pp) +{ + int rc; + + /* Important: Don't leak passwords */ + bool secure = strncmp(pp->name, "security-", 9) == 0; + + if (!IS_ENABLED(CONFIG_SYSFS)) + return 0; + + if (!of_kset || !of_node_is_attached(np)) + return 0; + + sysfs_bin_attr_init(&pp->attr); + pp->attr.attr.name = safe_name(&np->kobj, pp->name); + pp->attr.attr.mode = secure ? S_IRUSR : S_IRUGO; + pp->attr.size = secure ? 0 : pp->length; + pp->attr.read = of_node_property_read; + + rc = sysfs_create_bin_file(&np->kobj, &pp->attr); + WARN(rc, "error adding attribute %s to node %s\n", pp->name, np->full_name); + return rc; +} + +int __of_attach_node_sysfs(struct device_node *np) +{ + const char *name; + struct property *pp; + int rc; + + if (!IS_ENABLED(CONFIG_SYSFS)) + return 0; + + if (!of_kset) + return 0; + + np->kobj.kset = of_kset; + if (!np->parent) { + /* Nodes without parents are new top level trees */ + rc = kobject_add(&np->kobj, NULL, "%s", + safe_name(&of_kset->kobj, "base")); + } else { + name = safe_name(&np->parent->kobj, kbasename(np->full_name)); + if (!name || !name[0]) + return -EINVAL; + + rc = kobject_add(&np->kobj, &np->parent->kobj, "%s", name); + } + if (rc) + return rc; + + for_each_property_of_node(np, pp) + __of_add_property_sysfs(np, pp); + + return 0; +} + +void __init of_core_init(void) +{ + struct device_node *np; + + /* Create the kset, and register existing nodes */ + mutex_lock(&of_mutex); + of_kset = kset_create_and_add("devicetree", NULL, firmware_kobj); + if (!of_kset) { + mutex_unlock(&of_mutex); + pr_err("devicetree: failed to register existing nodes\n"); + return; + } + for_each_of_allnodes(np) + __of_attach_node_sysfs(np); + mutex_unlock(&of_mutex); + + /* Symlink in /proc as required by userspace ABI */ + if (of_root) + proc_symlink("device-tree", NULL, "/sys/firmware/devicetree/base"); +} + +static struct property *__of_find_property(const struct device_node *np, + const char *name, int *lenp) +{ + struct property *pp; + + if (!np) + return NULL; + + for (pp = np->properties; pp; pp = pp->next) { + if (of_prop_cmp(pp->name, name) == 0) { + if (lenp) + *lenp = pp->length; + break; + } + } + + return pp; +} + +struct property *of_find_property(const struct device_node *np, + const char *name, + int *lenp) +{ + struct property *pp; + unsigned long flags; + + raw_spin_lock_irqsave(&devtree_lock, flags); + pp = __of_find_property(np, name, lenp); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + return pp; +} +EXPORT_SYMBOL(of_find_property); + +struct device_node *__of_find_all_nodes(struct device_node *prev) +{ + struct device_node *np; + if (!prev) { + np = of_root; + } else if (prev->child) { + np = prev->child; + } else { + /* Walk back up looking for a sibling, or the end of the structure */ + np = prev; + while (np->parent && !np->sibling) + np = np->parent; + np = np->sibling; /* Might be null at the end of the tree */ + } + return np; +} + +/** + * of_find_all_nodes - Get next node in global list + * @prev: Previous node or NULL to start iteration + * of_node_put() will be called on it + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_all_nodes(struct device_node *prev) +{ + struct device_node *np; + unsigned long flags; + + raw_spin_lock_irqsave(&devtree_lock, flags); + np = __of_find_all_nodes(prev); + of_node_get(np); + of_node_put(prev); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return np; +} +EXPORT_SYMBOL(of_find_all_nodes); + +/* + * Find a property with a given name for a given node + * and return the value. + */ +const void *__of_get_property(const struct device_node *np, + const char *name, int *lenp) +{ + struct property *pp = __of_find_property(np, name, lenp); + + return pp ? pp->value : NULL; +} + +/* + * Find a property with a given name for a given node + * and return the value. + */ +const void *of_get_property(const struct device_node *np, const char *name, + int *lenp) +{ + struct property *pp = of_find_property(np, name, lenp); + + return pp ? pp->value : NULL; +} +EXPORT_SYMBOL(of_get_property); + +/* + * arch_match_cpu_phys_id - Match the given logical CPU and physical id + * + * @cpu: logical cpu index of a core/thread + * @phys_id: physical identifier of a core/thread + * + * CPU logical to physical index mapping is architecture specific. + * However this __weak function provides a default match of physical + * id to logical cpu index. phys_id provided here is usually values read + * from the device tree which must match the hardware internal registers. + * + * Returns true if the physical identifier and the logical cpu index + * correspond to the same core/thread, false otherwise. + */ +bool __weak arch_match_cpu_phys_id(int cpu, u64 phys_id) +{ + return (u32)phys_id == cpu; +} + +/** + * Checks if the given "prop_name" property holds the physical id of the + * core/thread corresponding to the logical cpu 'cpu'. If 'thread' is not + * NULL, local thread number within the core is returned in it. + */ +static bool __of_find_n_match_cpu_property(struct device_node *cpun, + const char *prop_name, int cpu, unsigned int *thread) +{ + const __be32 *cell; + int ac, prop_len, tid; + u64 hwid; + + ac = of_n_addr_cells(cpun); + cell = of_get_property(cpun, prop_name, &prop_len); + if (!cell || !ac) + return false; + prop_len /= sizeof(*cell) * ac; + for (tid = 0; tid < prop_len; tid++) { + hwid = of_read_number(cell, ac); + if (arch_match_cpu_phys_id(cpu, hwid)) { + if (thread) + *thread = tid; + return true; + } + cell += ac; + } + return false; +} + +/* + * arch_find_n_match_cpu_physical_id - See if the given device node is + * for the cpu corresponding to logical cpu 'cpu'. Return true if so, + * else false. If 'thread' is non-NULL, the local thread number within the + * core is returned in it. + */ +bool __weak arch_find_n_match_cpu_physical_id(struct device_node *cpun, + int cpu, unsigned int *thread) +{ + /* Check for non-standard "ibm,ppc-interrupt-server#s" property + * for thread ids on PowerPC. If it doesn't exist fallback to + * standard "reg" property. + */ + if (IS_ENABLED(CONFIG_PPC) && + __of_find_n_match_cpu_property(cpun, + "ibm,ppc-interrupt-server#s", + cpu, thread)) + return true; + + if (__of_find_n_match_cpu_property(cpun, "reg", cpu, thread)) + return true; + + return false; +} + +/** + * of_get_cpu_node - Get device node associated with the given logical CPU + * + * @cpu: CPU number(logical index) for which device node is required + * @thread: if not NULL, local thread number within the physical core is + * returned + * + * The main purpose of this function is to retrieve the device node for the + * given logical CPU index. It should be used to initialize the of_node in + * cpu device. Once of_node in cpu device is populated, all the further + * references can use that instead. + * + * CPU logical to physical index mapping is architecture specific and is built + * before booting secondary cores. This function uses arch_match_cpu_phys_id + * which can be overridden by architecture specific implementation. + * + * Returns a node pointer for the logical cpu if found, else NULL. + */ +struct device_node *of_get_cpu_node(int cpu, unsigned int *thread) +{ + struct device_node *cpun; + + for_each_node_by_type(cpun, "cpu") { + if (arch_find_n_match_cpu_physical_id(cpun, cpu, thread)) + return cpun; + } + return NULL; +} +EXPORT_SYMBOL(of_get_cpu_node); + +/** + * __of_device_is_compatible() - Check if the node matches given constraints + * @device: pointer to node + * @compat: required compatible string, NULL or "" for any match + * @type: required device_type value, NULL or "" for any match + * @name: required node name, NULL or "" for any match + * + * Checks if the given @compat, @type and @name strings match the + * properties of the given @device. A constraints can be skipped by + * passing NULL or an empty string as the constraint. + * + * Returns 0 for no match, and a positive integer on match. The return + * value is a relative score with larger values indicating better + * matches. The score is weighted for the most specific compatible value + * to get the highest score. Matching type is next, followed by matching + * name. Practically speaking, this results in the following priority + * order for matches: + * + * 1. specific compatible && type && name + * 2. specific compatible && type + * 3. specific compatible && name + * 4. specific compatible + * 5. general compatible && type && name + * 6. general compatible && type + * 7. general compatible && name + * 8. general compatible + * 9. type && name + * 10. type + * 11. name + */ +static int __of_device_is_compatible(const struct device_node *device, + const char *compat, const char *type, const char *name) +{ + struct property *prop; + const char *cp; + int index = 0, score = 0; + + /* Compatible match has highest priority */ + if (compat && compat[0]) { + prop = __of_find_property(device, "compatible", NULL); + for (cp = of_prop_next_string(prop, NULL); cp; + cp = of_prop_next_string(prop, cp), index++) { + if (of_compat_cmp(cp, compat, strlen(compat)) == 0) { + score = INT_MAX/2 - (index << 2); + break; + } + } + if (!score) + return 0; + } + + /* Matching type is better than matching name */ + if (type && type[0]) { + if (!device->type || of_node_cmp(type, device->type)) + return 0; + score += 2; + } + + /* Matching name is a bit better than not */ + if (name && name[0]) { + if (!device->name || of_node_cmp(name, device->name)) + return 0; + score++; + } + + return score; +} + +/** Checks if the given "compat" string matches one of the strings in + * the device's "compatible" property + */ +int of_device_is_compatible(const struct device_node *device, + const char *compat) +{ + unsigned long flags; + int res; + + raw_spin_lock_irqsave(&devtree_lock, flags); + res = __of_device_is_compatible(device, compat, NULL, NULL); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return res; +} +EXPORT_SYMBOL(of_device_is_compatible); + +/** + * of_machine_is_compatible - Test root of device tree for a given compatible value + * @compat: compatible string to look for in root node's compatible property. + * + * Returns a positive integer if the root node has the given value in its + * compatible property. + */ +int of_machine_is_compatible(const char *compat) +{ + struct device_node *root; + int rc = 0; + + root = of_find_node_by_path("/"); + if (root) { + rc = of_device_is_compatible(root, compat); + of_node_put(root); + } + return rc; +} +EXPORT_SYMBOL(of_machine_is_compatible); + +/** + * __of_device_is_available - check if a device is available for use + * + * @device: Node to check for availability, with locks already held + * + * Returns true if the status property is absent or set to "okay" or "ok", + * false otherwise + */ +static bool __of_device_is_available(const struct device_node *device) +{ + const char *status; + int statlen; + + if (!device) + return false; + + status = __of_get_property(device, "status", &statlen); + if (status == NULL) + return true; + + if (statlen > 0) { + if (!strcmp(status, "okay") || !strcmp(status, "ok")) + return true; + } + + return false; +} + +/** + * of_device_is_available - check if a device is available for use + * + * @device: Node to check for availability + * + * Returns true if the status property is absent or set to "okay" or "ok", + * false otherwise + */ +bool of_device_is_available(const struct device_node *device) +{ + unsigned long flags; + bool res; + + raw_spin_lock_irqsave(&devtree_lock, flags); + res = __of_device_is_available(device); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return res; + +} +EXPORT_SYMBOL(of_device_is_available); + +/** + * of_device_is_big_endian - check if a device has BE registers + * + * @device: Node to check for endianness + * + * Returns true if the device has a "big-endian" property, or if the kernel + * was compiled for BE *and* the device has a "native-endian" property. + * Returns false otherwise. + * + * Callers would nominally use ioread32be/iowrite32be if + * of_device_is_big_endian() == true, or readl/writel otherwise. + */ +bool of_device_is_big_endian(const struct device_node *device) +{ + if (of_property_read_bool(device, "big-endian")) + return true; + if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && + of_property_read_bool(device, "native-endian")) + return true; + return false; +} +EXPORT_SYMBOL(of_device_is_big_endian); + +/** + * of_get_parent - Get a node's parent if any + * @node: Node to get parent + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_get_parent(const struct device_node *node) +{ + struct device_node *np; + unsigned long flags; + + if (!node) + return NULL; + + raw_spin_lock_irqsave(&devtree_lock, flags); + np = of_node_get(node->parent); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return np; +} +EXPORT_SYMBOL(of_get_parent); + +/** + * of_get_next_parent - Iterate to a node's parent + * @node: Node to get parent of + * + * This is like of_get_parent() except that it drops the + * refcount on the passed node, making it suitable for iterating + * through a node's parents. + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_get_next_parent(struct device_node *node) +{ + struct device_node *parent; + unsigned long flags; + + if (!node) + return NULL; + + raw_spin_lock_irqsave(&devtree_lock, flags); + parent = of_node_get(node->parent); + of_node_put(node); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return parent; +} +EXPORT_SYMBOL(of_get_next_parent); + +static struct device_node *__of_get_next_child(const struct device_node *node, + struct device_node *prev) +{ + struct device_node *next; + + if (!node) + return NULL; + + next = prev ? prev->sibling : node->child; + for (; next; next = next->sibling) + if (of_node_get(next)) + break; + of_node_put(prev); + return next; +} +#define __for_each_child_of_node(parent, child) \ + for (child = __of_get_next_child(parent, NULL); child != NULL; \ + child = __of_get_next_child(parent, child)) + +/** + * of_get_next_child - Iterate a node childs + * @node: parent node + * @prev: previous child of the parent node, or NULL to get first + * + * Returns a node pointer with refcount incremented, use of_node_put() on + * it when done. Returns NULL when prev is the last child. Decrements the + * refcount of prev. + */ +struct device_node *of_get_next_child(const struct device_node *node, + struct device_node *prev) +{ + struct device_node *next; + unsigned long flags; + + raw_spin_lock_irqsave(&devtree_lock, flags); + next = __of_get_next_child(node, prev); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return next; +} +EXPORT_SYMBOL(of_get_next_child); + +/** + * of_get_next_available_child - Find the next available child node + * @node: parent node + * @prev: previous child of the parent node, or NULL to get first + * + * This function is like of_get_next_child(), except that it + * automatically skips any disabled nodes (i.e. status = "disabled"). + */ +struct device_node *of_get_next_available_child(const struct device_node *node, + struct device_node *prev) +{ + struct device_node *next; + unsigned long flags; + + if (!node) + return NULL; + + raw_spin_lock_irqsave(&devtree_lock, flags); + next = prev ? prev->sibling : node->child; + for (; next; next = next->sibling) { + if (!__of_device_is_available(next)) + continue; + if (of_node_get(next)) + break; + } + of_node_put(prev); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return next; +} +EXPORT_SYMBOL(of_get_next_available_child); + +/** + * of_get_child_by_name - Find the child node by name for a given parent + * @node: parent node + * @name: child name to look for. + * + * This function looks for child node for given matching name + * + * Returns a node pointer if found, with refcount incremented, use + * of_node_put() on it when done. + * Returns NULL if node is not found. + */ +struct device_node *of_get_child_by_name(const struct device_node *node, + const char *name) +{ + struct device_node *child; + + for_each_child_of_node(node, child) + if (child->name && (of_node_cmp(child->name, name) == 0)) + break; + return child; +} +EXPORT_SYMBOL(of_get_child_by_name); + +static struct device_node *__of_find_node_by_path(struct device_node *parent, + const char *path) +{ + struct device_node *child; + int len; + + len = strcspn(path, "/:"); + if (!len) + return NULL; + + __for_each_child_of_node(parent, child) { + const char *name = strrchr(child->full_name, '/'); + if (WARN(!name, "malformed device_node %s\n", child->full_name)) + continue; + name++; + if (strncmp(path, name, len) == 0 && (strlen(name) == len)) + return child; + } + return NULL; +} + +/** + * of_find_node_opts_by_path - Find a node matching a full OF path + * @path: Either the full path to match, or if the path does not + * start with '/', the name of a property of the /aliases + * node (an alias). In the case of an alias, the node + * matching the alias' value will be returned. + * @opts: Address of a pointer into which to store the start of + * an options string appended to the end of the path with + * a ':' separator. + * + * Valid paths: + * /foo/bar Full path + * foo Valid alias + * foo/bar Valid alias + relative path + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_node_opts_by_path(const char *path, const char **opts) +{ + struct device_node *np = NULL; + struct property *pp; + unsigned long flags; + const char *separator = strchr(path, ':'); + + if (opts) + *opts = separator ? separator + 1 : NULL; + + if (strcmp(path, "/") == 0) + return of_node_get(of_root); + + /* The path could begin with an alias */ + if (*path != '/') { + int len; + const char *p = separator; + + if (!p) + p = strchrnul(path, '/'); + len = p - path; + + /* of_aliases must not be NULL */ + if (!of_aliases) + return NULL; + + for_each_property_of_node(of_aliases, pp) { + if (strlen(pp->name) == len && !strncmp(pp->name, path, len)) { + np = of_find_node_by_path(pp->value); + break; + } + } + if (!np) + return NULL; + path = p; + } + + /* Step down the tree matching path components */ + raw_spin_lock_irqsave(&devtree_lock, flags); + if (!np) + np = of_node_get(of_root); + while (np && *path == '/') { + path++; /* Increment past '/' delimiter */ + np = __of_find_node_by_path(np, path); + path = strchrnul(path, '/'); + if (separator && separator < path) + break; + } + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return np; +} +EXPORT_SYMBOL(of_find_node_opts_by_path); + +/** + * of_find_node_by_name - Find a node by its "name" property + * @from: The node to start searching from or NULL, the node + * you pass will not be searched, only the next one + * will; typically, you pass what the previous call + * returned. of_node_put() will be called on it + * @name: The name string to match against + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_node_by_name(struct device_node *from, + const char *name) +{ + struct device_node *np; + unsigned long flags; + + raw_spin_lock_irqsave(&devtree_lock, flags); + for_each_of_allnodes_from(from, np) + if (np->name && (of_node_cmp(np->name, name) == 0) + && of_node_get(np)) + break; + of_node_put(from); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return np; +} +EXPORT_SYMBOL(of_find_node_by_name); + +/** + * of_find_node_by_type - Find a node by its "device_type" property + * @from: The node to start searching from, or NULL to start searching + * the entire device tree. The node you pass will not be + * searched, only the next one will; typically, you pass + * what the previous call returned. of_node_put() will be + * called on from for you. + * @type: The type string to match against + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_node_by_type(struct device_node *from, + const char *type) +{ + struct device_node *np; + unsigned long flags; + + raw_spin_lock_irqsave(&devtree_lock, flags); + for_each_of_allnodes_from(from, np) + if (np->type && (of_node_cmp(np->type, type) == 0) + && of_node_get(np)) + break; + of_node_put(from); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return np; +} +EXPORT_SYMBOL(of_find_node_by_type); + +/** + * of_find_compatible_node - Find a node based on type and one of the + * tokens in its "compatible" property + * @from: The node to start searching from or NULL, the node + * you pass will not be searched, only the next one + * will; typically, you pass what the previous call + * returned. of_node_put() will be called on it + * @type: The type string to match "device_type" or NULL to ignore + * @compatible: The string to match to one of the tokens in the device + * "compatible" list. + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_compatible_node(struct device_node *from, + const char *type, const char *compatible) +{ + struct device_node *np; + unsigned long flags; + + raw_spin_lock_irqsave(&devtree_lock, flags); + for_each_of_allnodes_from(from, np) + if (__of_device_is_compatible(np, compatible, type, NULL) && + of_node_get(np)) + break; + of_node_put(from); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return np; +} +EXPORT_SYMBOL(of_find_compatible_node); + +/** + * of_find_node_with_property - Find a node which has a property with + * the given name. + * @from: The node to start searching from or NULL, the node + * you pass will not be searched, only the next one + * will; typically, you pass what the previous call + * returned. of_node_put() will be called on it + * @prop_name: The name of the property to look for. + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_node_with_property(struct device_node *from, + const char *prop_name) +{ + struct device_node *np; + struct property *pp; + unsigned long flags; + + raw_spin_lock_irqsave(&devtree_lock, flags); + for_each_of_allnodes_from(from, np) { + for (pp = np->properties; pp; pp = pp->next) { + if (of_prop_cmp(pp->name, prop_name) == 0) { + of_node_get(np); + goto out; + } + } + } +out: + of_node_put(from); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return np; +} +EXPORT_SYMBOL(of_find_node_with_property); + +static +const struct of_device_id *__of_match_node(const struct of_device_id *matches, + const struct device_node *node) +{ + const struct of_device_id *best_match = NULL; + int score, best_score = 0; + + if (!matches) + return NULL; + + for (; matches->name[0] || matches->type[0] || matches->compatible[0]; matches++) { + score = __of_device_is_compatible(node, matches->compatible, + matches->type, matches->name); + if (score > best_score) { + best_match = matches; + best_score = score; + } + } + + return best_match; +} + +/** + * of_match_node - Tell if a device_node has a matching of_match structure + * @matches: array of of device match structures to search in + * @node: the of device structure to match against + * + * Low level utility function used by device matching. + */ +const struct of_device_id *of_match_node(const struct of_device_id *matches, + const struct device_node *node) +{ + const struct of_device_id *match; + unsigned long flags; + + raw_spin_lock_irqsave(&devtree_lock, flags); + match = __of_match_node(matches, node); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return match; +} +EXPORT_SYMBOL(of_match_node); + +/** + * of_find_matching_node_and_match - Find a node based on an of_device_id + * match table. + * @from: The node to start searching from or NULL, the node + * you pass will not be searched, only the next one + * will; typically, you pass what the previous call + * returned. of_node_put() will be called on it + * @matches: array of of device match structures to search in + * @match Updated to point at the matches entry which matched + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_matching_node_and_match(struct device_node *from, + const struct of_device_id *matches, + const struct of_device_id **match) +{ + struct device_node *np; + const struct of_device_id *m; + unsigned long flags; + + if (match) + *match = NULL; + + raw_spin_lock_irqsave(&devtree_lock, flags); + for_each_of_allnodes_from(from, np) { + m = __of_match_node(matches, np); + if (m && of_node_get(np)) { + if (match) + *match = m; + break; + } + } + of_node_put(from); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return np; +} +EXPORT_SYMBOL(of_find_matching_node_and_match); + +/** + * of_modalias_node - Lookup appropriate modalias for a device node + * @node: pointer to a device tree node + * @modalias: Pointer to buffer that modalias value will be copied into + * @len: Length of modalias value + * + * Based on the value of the compatible property, this routine will attempt + * to choose an appropriate modalias value for a particular device tree node. + * It does this by stripping the manufacturer prefix (as delimited by a ',') + * from the first entry in the compatible list property. + * + * This routine returns 0 on success, <0 on failure. + */ +int of_modalias_node(struct device_node *node, char *modalias, int len) +{ + const char *compatible, *p; + int cplen; + + compatible = of_get_property(node, "compatible", &cplen); + if (!compatible || strlen(compatible) > cplen) + return -ENODEV; + p = strchr(compatible, ','); + strlcpy(modalias, p ? p + 1 : compatible, len); + return 0; +} +EXPORT_SYMBOL_GPL(of_modalias_node); + +/** + * of_find_node_by_phandle - Find a node given a phandle + * @handle: phandle of the node to find + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. + */ +struct device_node *of_find_node_by_phandle(phandle handle) +{ + struct device_node *np; + unsigned long flags; + + if (!handle) + return NULL; + + raw_spin_lock_irqsave(&devtree_lock, flags); + for_each_of_allnodes(np) + if (np->phandle == handle) + break; + of_node_get(np); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + return np; +} +EXPORT_SYMBOL(of_find_node_by_phandle); + +/** + * of_property_count_elems_of_size - Count the number of elements in a property + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @elem_size: size of the individual element + * + * Search for a property in a device node and count the number of elements of + * size elem_size in it. Returns number of elements on sucess, -EINVAL if the + * property does not exist or its length does not match a multiple of elem_size + * and -ENODATA if the property does not have a value. + */ +int of_property_count_elems_of_size(const struct device_node *np, + const char *propname, int elem_size) +{ + struct property *prop = of_find_property(np, propname, NULL); + + if (!prop) + return -EINVAL; + if (!prop->value) + return -ENODATA; + + if (prop->length % elem_size != 0) { + pr_err("size of %s in node %s is not a multiple of %d\n", + propname, np->full_name, elem_size); + return -EINVAL; + } + + return prop->length / elem_size; +} +EXPORT_SYMBOL_GPL(of_property_count_elems_of_size); + +/** + * of_find_property_value_of_size + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @len: requested length of property value + * + * Search for a property in a device node and valid the requested size. + * Returns the property value on success, -EINVAL if the property does not + * exist, -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + */ +static void *of_find_property_value_of_size(const struct device_node *np, + const char *propname, u32 len) +{ + struct property *prop = of_find_property(np, propname, NULL); + + if (!prop) + return ERR_PTR(-EINVAL); + if (!prop->value) + return ERR_PTR(-ENODATA); + if (len > prop->length) + return ERR_PTR(-EOVERFLOW); + + return prop->value; +} + +/** + * of_property_read_u32_index - Find and read a u32 from a multi-value property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @index: index of the u32 in the list of values + * @out_value: pointer to return value, modified only if no error. + * + * Search for a property in a device node and read nth 32-bit value from + * it. Returns 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * The out_value is modified only if a valid u32 value can be decoded. + */ +int of_property_read_u32_index(const struct device_node *np, + const char *propname, + u32 index, u32 *out_value) +{ + const u32 *val = of_find_property_value_of_size(np, propname, + ((index + 1) * sizeof(*out_value))); + + if (IS_ERR(val)) + return PTR_ERR(val); + + *out_value = be32_to_cpup(((__be32 *)val) + index); + return 0; +} +EXPORT_SYMBOL_GPL(of_property_read_u32_index); + +/** + * of_property_read_u8_array - Find and read an array of u8 from a property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_values: pointer to return value, modified only if return value is 0. + * @sz: number of array elements to read + * + * Search for a property in a device node and read 8-bit value(s) from + * it. Returns 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * dts entry of array should be like: + * property = /bits/ 8 <0x50 0x60 0x70>; + * + * The out_values is modified only if a valid u8 value can be decoded. + */ +int of_property_read_u8_array(const struct device_node *np, + const char *propname, u8 *out_values, size_t sz) +{ + const u8 *val = of_find_property_value_of_size(np, propname, + (sz * sizeof(*out_values))); + + if (IS_ERR(val)) + return PTR_ERR(val); + + while (sz--) + *out_values++ = *val++; + return 0; +} +EXPORT_SYMBOL_GPL(of_property_read_u8_array); + +/** + * of_property_read_u16_array - Find and read an array of u16 from a property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_values: pointer to return value, modified only if return value is 0. + * @sz: number of array elements to read + * + * Search for a property in a device node and read 16-bit value(s) from + * it. Returns 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * dts entry of array should be like: + * property = /bits/ 16 <0x5000 0x6000 0x7000>; + * + * The out_values is modified only if a valid u16 value can be decoded. + */ +int of_property_read_u16_array(const struct device_node *np, + const char *propname, u16 *out_values, size_t sz) +{ + const __be16 *val = of_find_property_value_of_size(np, propname, + (sz * sizeof(*out_values))); + + if (IS_ERR(val)) + return PTR_ERR(val); + + while (sz--) + *out_values++ = be16_to_cpup(val++); + return 0; +} +EXPORT_SYMBOL_GPL(of_property_read_u16_array); + +/** + * of_property_read_u32_array - Find and read an array of 32 bit integers + * from a property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_values: pointer to return value, modified only if return value is 0. + * @sz: number of array elements to read + * + * Search for a property in a device node and read 32-bit value(s) from + * it. Returns 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * The out_values is modified only if a valid u32 value can be decoded. + */ +int of_property_read_u32_array(const struct device_node *np, + const char *propname, u32 *out_values, + size_t sz) +{ + const __be32 *val = of_find_property_value_of_size(np, propname, + (sz * sizeof(*out_values))); + + if (IS_ERR(val)) + return PTR_ERR(val); + + while (sz--) + *out_values++ = be32_to_cpup(val++); + return 0; +} +EXPORT_SYMBOL_GPL(of_property_read_u32_array); + +/** + * of_property_read_u64 - Find and read a 64 bit integer from a property + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_value: pointer to return value, modified only if return value is 0. + * + * Search for a property in a device node and read a 64-bit value from + * it. Returns 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * The out_value is modified only if a valid u64 value can be decoded. + */ +int of_property_read_u64(const struct device_node *np, const char *propname, + u64 *out_value) +{ + const __be32 *val = of_find_property_value_of_size(np, propname, + sizeof(*out_value)); + + if (IS_ERR(val)) + return PTR_ERR(val); + + *out_value = of_read_number(val, 2); + return 0; +} +EXPORT_SYMBOL_GPL(of_property_read_u64); + +/** + * of_property_read_u64_array - Find and read an array of 64 bit integers + * from a property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_values: pointer to return value, modified only if return value is 0. + * @sz: number of array elements to read + * + * Search for a property in a device node and read 64-bit value(s) from + * it. Returns 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * The out_values is modified only if a valid u64 value can be decoded. + */ +int of_property_read_u64_array(const struct device_node *np, + const char *propname, u64 *out_values, + size_t sz) +{ + const __be32 *val = of_find_property_value_of_size(np, propname, + (sz * sizeof(*out_values))); + + if (IS_ERR(val)) + return PTR_ERR(val); + + while (sz--) { + *out_values++ = of_read_number(val, 2); + val += 2; + } + return 0; +} +EXPORT_SYMBOL_GPL(of_property_read_u64_array); + +/** + * of_property_read_string - Find and read a string from a property + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_string: pointer to null terminated return string, modified only if + * return value is 0. + * + * Search for a property in a device tree node and retrieve a null + * terminated string value (pointer to data, not a copy). Returns 0 on + * success, -EINVAL if the property does not exist, -ENODATA if property + * does not have a value, and -EILSEQ if the string is not null-terminated + * within the length of the property data. + * + * The out_string pointer is modified only if a valid string can be decoded. + */ +int of_property_read_string(struct device_node *np, const char *propname, + const char **out_string) +{ + struct property *prop = of_find_property(np, propname, NULL); + if (!prop) + return -EINVAL; + if (!prop->value) + return -ENODATA; + if (strnlen(prop->value, prop->length) >= prop->length) + return -EILSEQ; + *out_string = prop->value; + return 0; +} +EXPORT_SYMBOL_GPL(of_property_read_string); + +/** + * of_property_match_string() - Find string in a list and return index + * @np: pointer to node containing string list property + * @propname: string list property name + * @string: pointer to string to search for in string list + * + * This function searches a string list property and returns the index + * of a specific string value. + */ +int of_property_match_string(struct device_node *np, const char *propname, + const char *string) +{ + struct property *prop = of_find_property(np, propname, NULL); + size_t l; + int i; + const char *p, *end; + + if (!prop) + return -EINVAL; + if (!prop->value) + return -ENODATA; + + p = prop->value; + end = p + prop->length; + + for (i = 0; p < end; i++, p += l) { + l = strnlen(p, end - p) + 1; + if (p + l > end) + return -EILSEQ; + pr_debug("comparing %s with %s\n", string, p); + if (strcmp(string, p) == 0) + return i; /* Found it; return index */ + } + return -ENODATA; +} +EXPORT_SYMBOL_GPL(of_property_match_string); + +/** + * of_property_read_string_helper() - Utility helper for parsing string properties + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_strs: output array of string pointers. + * @sz: number of array elements to read. + * @skip: Number of strings to skip over at beginning of list. + * + * Don't call this function directly. It is a utility helper for the + * of_property_read_string*() family of functions. + */ +int of_property_read_string_helper(struct device_node *np, const char *propname, + const char **out_strs, size_t sz, int skip) +{ + struct property *prop = of_find_property(np, propname, NULL); + int l = 0, i = 0; + const char *p, *end; + + if (!prop) + return -EINVAL; + if (!prop->value) + return -ENODATA; + p = prop->value; + end = p + prop->length; + + for (i = 0; p < end && (!out_strs || i < skip + sz); i++, p += l) { + l = strnlen(p, end - p) + 1; + if (p + l > end) + return -EILSEQ; + if (out_strs && i >= skip) + *out_strs++ = p; + } + i -= skip; + return i <= 0 ? -ENODATA : i; +} +EXPORT_SYMBOL_GPL(of_property_read_string_helper); + +void of_print_phandle_args(const char *msg, const struct of_phandle_args *args) +{ + int i; + printk("%s %s", msg, of_node_full_name(args->np)); + for (i = 0; i < args->args_count; i++) + printk(i ? ",%08x" : ":%08x", args->args[i]); + printk("\n"); +} + +static int __of_parse_phandle_with_args(const struct device_node *np, + const char *list_name, + const char *cells_name, + int cell_count, int index, + struct of_phandle_args *out_args) +{ + const __be32 *list, *list_end; + int rc = 0, size, cur_index = 0; + uint32_t count = 0; + struct device_node *node = NULL; + phandle phandle; + + /* Retrieve the phandle list property */ + list = of_get_property(np, list_name, &size); + if (!list) + return -ENOENT; + list_end = list + size / sizeof(*list); + + /* Loop over the phandles until all the requested entry is found */ + while (list < list_end) { + rc = -EINVAL; + count = 0; + + /* + * If phandle is 0, then it is an empty entry with no + * arguments. Skip forward to the next entry. + */ + phandle = be32_to_cpup(list++); + if (phandle) { + /* + * Find the provider node and parse the #*-cells + * property to determine the argument length. + * + * This is not needed if the cell count is hard-coded + * (i.e. cells_name not set, but cell_count is set), + * except when we're going to return the found node + * below. + */ + if (cells_name || cur_index == index) { + node = of_find_node_by_phandle(phandle); + if (!node) { + pr_err("%s: could not find phandle\n", + np->full_name); + goto err; + } + } + + if (cells_name) { + if (of_property_read_u32(node, cells_name, + &count)) { + pr_err("%s: could not get %s for %s\n", + np->full_name, cells_name, + node->full_name); + goto err; + } + } else { + count = cell_count; + } + + /* + * Make sure that the arguments actually fit in the + * remaining property data length + */ + if (list + count > list_end) { + pr_err("%s: arguments longer than property\n", + np->full_name); + goto err; + } + } + + /* + * All of the error cases above bail out of the loop, so at + * this point, the parsing is successful. If the requested + * index matches, then fill the out_args structure and return, + * or return -ENOENT for an empty entry. + */ + rc = -ENOENT; + if (cur_index == index) { + if (!phandle) + goto err; + + if (out_args) { + int i; + if (WARN_ON(count > MAX_PHANDLE_ARGS)) + count = MAX_PHANDLE_ARGS; + out_args->np = node; + out_args->args_count = count; + for (i = 0; i < count; i++) + out_args->args[i] = be32_to_cpup(list++); + } else { + of_node_put(node); + } + + /* Found it! return success */ + return 0; + } + + of_node_put(node); + node = NULL; + list += count; + cur_index++; + } + + /* + * Unlock node before returning result; will be one of: + * -ENOENT : index is for empty phandle + * -EINVAL : parsing error on data + * [1..n] : Number of phandle (count mode; when index = -1) + */ + rc = index < 0 ? cur_index : -ENOENT; + err: + if (node) + of_node_put(node); + return rc; +} + +/** + * of_parse_phandle - Resolve a phandle property to a device_node pointer + * @np: Pointer to device node holding phandle property + * @phandle_name: Name of property holding a phandle value + * @index: For properties holding a table of phandles, this is the index into + * the table + * + * Returns the device_node pointer with refcount incremented. Use + * of_node_put() on it when done. + */ +struct device_node *of_parse_phandle(const struct device_node *np, + const char *phandle_name, int index) +{ + struct of_phandle_args args; + + if (index < 0) + return NULL; + + if (__of_parse_phandle_with_args(np, phandle_name, NULL, 0, + index, &args)) + return NULL; + + return args.np; +} +EXPORT_SYMBOL(of_parse_phandle); + +/** + * of_parse_phandle_with_args() - Find a node pointed by phandle in a list + * @np: pointer to a device tree node containing a list + * @list_name: property name that contains a list + * @cells_name: property name that specifies phandles' arguments count + * @index: index of a phandle to parse out + * @out_args: optional pointer to output arguments structure (will be filled) + * + * This function is useful to parse lists of phandles and their arguments. + * Returns 0 on success and fills out_args, on error returns appropriate + * errno value. + * + * Caller is responsible to call of_node_put() on the returned out_args->np + * pointer. + * + * Example: + * + * phandle1: node1 { + * #list-cells = <2>; + * } + * + * phandle2: node2 { + * #list-cells = <1>; + * } + * + * node3 { + * list = <&phandle1 1 2 &phandle2 3>; + * } + * + * To get a device_node of the `node2' node you may call this: + * of_parse_phandle_with_args(node3, "list", "#list-cells", 1, &args); + */ +int of_parse_phandle_with_args(const struct device_node *np, const char *list_name, + const char *cells_name, int index, + struct of_phandle_args *out_args) +{ + if (index < 0) + return -EINVAL; + return __of_parse_phandle_with_args(np, list_name, cells_name, 0, + index, out_args); +} +EXPORT_SYMBOL(of_parse_phandle_with_args); + +/** + * of_parse_phandle_with_fixed_args() - Find a node pointed by phandle in a list + * @np: pointer to a device tree node containing a list + * @list_name: property name that contains a list + * @cell_count: number of argument cells following the phandle + * @index: index of a phandle to parse out + * @out_args: optional pointer to output arguments structure (will be filled) + * + * This function is useful to parse lists of phandles and their arguments. + * Returns 0 on success and fills out_args, on error returns appropriate + * errno value. + * + * Caller is responsible to call of_node_put() on the returned out_args->np + * pointer. + * + * Example: + * + * phandle1: node1 { + * } + * + * phandle2: node2 { + * } + * + * node3 { + * list = <&phandle1 0 2 &phandle2 2 3>; + * } + * + * To get a device_node of the `node2' node you may call this: + * of_parse_phandle_with_fixed_args(node3, "list", 2, 1, &args); + */ +int of_parse_phandle_with_fixed_args(const struct device_node *np, + const char *list_name, int cell_count, + int index, struct of_phandle_args *out_args) +{ + if (index < 0) + return -EINVAL; + return __of_parse_phandle_with_args(np, list_name, NULL, cell_count, + index, out_args); +} +EXPORT_SYMBOL(of_parse_phandle_with_fixed_args); + +/** + * of_count_phandle_with_args() - Find the number of phandles references in a property + * @np: pointer to a device tree node containing a list + * @list_name: property name that contains a list + * @cells_name: property name that specifies phandles' arguments count + * + * Returns the number of phandle + argument tuples within a property. It + * is a typical pattern to encode a list of phandle and variable + * arguments into a single property. The number of arguments is encoded + * by a property in the phandle-target node. For example, a gpios + * property would contain a list of GPIO specifies consisting of a + * phandle and 1 or more arguments. The number of arguments are + * determined by the #gpio-cells property in the node pointed to by the + * phandle. + */ +int of_count_phandle_with_args(const struct device_node *np, const char *list_name, + const char *cells_name) +{ + return __of_parse_phandle_with_args(np, list_name, cells_name, 0, -1, + NULL); +} +EXPORT_SYMBOL(of_count_phandle_with_args); + +/** + * __of_add_property - Add a property to a node without lock operations + */ +int __of_add_property(struct device_node *np, struct property *prop) +{ + struct property **next; + + prop->next = NULL; + next = &np->properties; + while (*next) { + if (strcmp(prop->name, (*next)->name) == 0) + /* duplicate ! don't insert it */ + return -EEXIST; + + next = &(*next)->next; + } + *next = prop; + + return 0; +} + +/** + * of_add_property - Add a property to a node + */ +int of_add_property(struct device_node *np, struct property *prop) +{ + unsigned long flags; + int rc; + + mutex_lock(&of_mutex); + + raw_spin_lock_irqsave(&devtree_lock, flags); + rc = __of_add_property(np, prop); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + if (!rc) + __of_add_property_sysfs(np, prop); + + mutex_unlock(&of_mutex); + + if (!rc) + of_property_notify(OF_RECONFIG_ADD_PROPERTY, np, prop, NULL); + + return rc; +} + +int __of_remove_property(struct device_node *np, struct property *prop) +{ + struct property **next; + + for (next = &np->properties; *next; next = &(*next)->next) { + if (*next == prop) + break; + } + if (*next == NULL) + return -ENODEV; + + /* found the node */ + *next = prop->next; + prop->next = np->deadprops; + np->deadprops = prop; + + return 0; +} + +void __of_remove_property_sysfs(struct device_node *np, struct property *prop) +{ + if (!IS_ENABLED(CONFIG_SYSFS)) + return; + + /* at early boot, bail here and defer setup to of_init() */ + if (of_kset && of_node_is_attached(np)) + sysfs_remove_bin_file(&np->kobj, &prop->attr); +} + +/** + * of_remove_property - Remove a property from a node. + * + * Note that we don't actually remove it, since we have given out + * who-knows-how-many pointers to the data using get-property. + * Instead we just move the property to the "dead properties" + * list, so it won't be found any more. + */ +int of_remove_property(struct device_node *np, struct property *prop) +{ + unsigned long flags; + int rc; + + mutex_lock(&of_mutex); + + raw_spin_lock_irqsave(&devtree_lock, flags); + rc = __of_remove_property(np, prop); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + if (!rc) + __of_remove_property_sysfs(np, prop); + + mutex_unlock(&of_mutex); + + if (!rc) + of_property_notify(OF_RECONFIG_REMOVE_PROPERTY, np, prop, NULL); + + return rc; +} + +int __of_update_property(struct device_node *np, struct property *newprop, + struct property **oldpropp) +{ + struct property **next, *oldprop; + + for (next = &np->properties; *next; next = &(*next)->next) { + if (of_prop_cmp((*next)->name, newprop->name) == 0) + break; + } + *oldpropp = oldprop = *next; + + if (oldprop) { + /* replace the node */ + newprop->next = oldprop->next; + *next = newprop; + oldprop->next = np->deadprops; + np->deadprops = oldprop; + } else { + /* new node */ + newprop->next = NULL; + *next = newprop; + } + + return 0; +} + +void __of_update_property_sysfs(struct device_node *np, struct property *newprop, + struct property *oldprop) +{ + if (!IS_ENABLED(CONFIG_SYSFS)) + return; + + /* At early boot, bail out and defer setup to of_init() */ + if (!of_kset) + return; + + if (oldprop) + sysfs_remove_bin_file(&np->kobj, &oldprop->attr); + __of_add_property_sysfs(np, newprop); +} + +/* + * of_update_property - Update a property in a node, if the property does + * not exist, add it. + * + * Note that we don't actually remove it, since we have given out + * who-knows-how-many pointers to the data using get-property. + * Instead we just move the property to the "dead properties" list, + * and add the new property to the property list + */ +int of_update_property(struct device_node *np, struct property *newprop) +{ + struct property *oldprop; + unsigned long flags; + int rc; + + if (!newprop->name) + return -EINVAL; + + mutex_lock(&of_mutex); + + raw_spin_lock_irqsave(&devtree_lock, flags); + rc = __of_update_property(np, newprop, &oldprop); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + if (!rc) + __of_update_property_sysfs(np, newprop, oldprop); + + mutex_unlock(&of_mutex); + + if (!rc) + of_property_notify(OF_RECONFIG_UPDATE_PROPERTY, np, newprop, oldprop); + + return rc; +} + +static void of_alias_add(struct alias_prop *ap, struct device_node *np, + int id, const char *stem, int stem_len) +{ + ap->np = np; + ap->id = id; + strncpy(ap->stem, stem, stem_len); + ap->stem[stem_len] = 0; + list_add_tail(&ap->link, &aliases_lookup); + pr_debug("adding DT alias:%s: stem=%s id=%i node=%s\n", + ap->alias, ap->stem, ap->id, of_node_full_name(np)); +} + +/** + * of_alias_scan - Scan all properties of the 'aliases' node + * + * The function scans all the properties of the 'aliases' node and populates + * the global lookup table with the properties. It returns the + * number of alias properties found, or an error code in case of failure. + * + * @dt_alloc: An allocator that provides a virtual address to memory + * for storing the resulting tree + */ +void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)) +{ + struct property *pp; + + of_aliases = of_find_node_by_path("/aliases"); + of_chosen = of_find_node_by_path("/chosen"); + if (of_chosen == NULL) + of_chosen = of_find_node_by_path("/chosen@0"); + + if (of_chosen) { + /* linux,stdout-path and /aliases/stdout are for legacy compatibility */ + const char *name = of_get_property(of_chosen, "stdout-path", NULL); + if (!name) + name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (IS_ENABLED(CONFIG_PPC) && !name) + name = of_get_property(of_aliases, "stdout", NULL); + if (name) + of_stdout = of_find_node_opts_by_path(name, &of_stdout_options); + } + + if (!of_aliases) + return; + + for_each_property_of_node(of_aliases, pp) { + const char *start = pp->name; + const char *end = start + strlen(start); + struct device_node *np; + struct alias_prop *ap; + int id, len; + + /* Skip those we do not want to proceed */ + if (!strcmp(pp->name, "name") || + !strcmp(pp->name, "phandle") || + !strcmp(pp->name, "linux,phandle")) + continue; + + np = of_find_node_by_path(pp->value); + if (!np) + continue; + + /* walk the alias backwards to extract the id and work out + * the 'stem' string */ + while (isdigit(*(end-1)) && end > start) + end--; + len = end - start; + + if (kstrtoint(end, 10, &id) < 0) + continue; + + /* Allocate an alias_prop with enough space for the stem */ + ap = dt_alloc(sizeof(*ap) + len + 1, 4); + if (!ap) + continue; + memset(ap, 0, sizeof(*ap) + len + 1); + ap->alias = start; + of_alias_add(ap, np, id, start, len); + } +} + +/** + * of_alias_get_id - Get alias id for the given device_node + * @np: Pointer to the given device_node + * @stem: Alias stem of the given device_node + * + * The function travels the lookup table to get the alias id for the given + * device_node and alias stem. It returns the alias id if found. + */ +int of_alias_get_id(struct device_node *np, const char *stem) +{ + struct alias_prop *app; + int id = -ENODEV; + + mutex_lock(&of_mutex); + list_for_each_entry(app, &aliases_lookup, link) { + if (strcmp(app->stem, stem) != 0) + continue; + + if (np == app->np) { + id = app->id; + break; + } + } + mutex_unlock(&of_mutex); + + return id; +} +EXPORT_SYMBOL_GPL(of_alias_get_id); + +/** + * of_alias_get_highest_id - Get highest alias id for the given stem + * @stem: Alias stem to be examined + * + * The function travels the lookup table to get the highest alias id for the + * given alias stem. It returns the alias id if found. + */ +int of_alias_get_highest_id(const char *stem) +{ + struct alias_prop *app; + int id = -ENODEV; + + mutex_lock(&of_mutex); + list_for_each_entry(app, &aliases_lookup, link) { + if (strcmp(app->stem, stem) != 0) + continue; + + if (app->id > id) + id = app->id; + } + mutex_unlock(&of_mutex); + + return id; +} +EXPORT_SYMBOL_GPL(of_alias_get_highest_id); + +const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur, + u32 *pu) +{ + const void *curv = cur; + + if (!prop) + return NULL; + + if (!cur) { + curv = prop->value; + goto out_val; + } + + curv += sizeof(*cur); + if (curv >= prop->value + prop->length) + return NULL; + +out_val: + *pu = be32_to_cpup(curv); + return curv; +} +EXPORT_SYMBOL_GPL(of_prop_next_u32); + +const char *of_prop_next_string(struct property *prop, const char *cur) +{ + const void *curv = cur; + + if (!prop) + return NULL; + + if (!cur) + return prop->value; + + curv += strlen(cur) + 1; + if (curv >= prop->value + prop->length) + return NULL; + + return curv; +} +EXPORT_SYMBOL_GPL(of_prop_next_string); + +/** + * of_console_check() - Test and setup console for DT setup + * @dn - Pointer to device node + * @name - Name to use for preferred console without index. ex. "ttyS" + * @index - Index to use for preferred console. + * + * Check if the given device node matches the stdout-path property in the + * /chosen node. If it does then register it as the preferred console and return + * TRUE. Otherwise return FALSE. + */ +bool of_console_check(struct device_node *dn, char *name, int index) +{ + if (!dn || dn != of_stdout || console_set_on_cmdline) + return false; + return !add_preferred_console(name, index, + kstrdup(of_stdout_options, GFP_KERNEL)); +} +EXPORT_SYMBOL_GPL(of_console_check); + +/** + * of_find_next_cache_node - Find a node's subsidiary cache + * @np: node of type "cpu" or "cache" + * + * Returns a node pointer with refcount incremented, use + * of_node_put() on it when done. Caller should hold a reference + * to np. + */ +struct device_node *of_find_next_cache_node(const struct device_node *np) +{ + struct device_node *child; + const phandle *handle; + + handle = of_get_property(np, "l2-cache", NULL); + if (!handle) + handle = of_get_property(np, "next-level-cache", NULL); + + if (handle) + return of_find_node_by_phandle(be32_to_cpup(handle)); + + /* OF on pmac has nodes instead of properties named "l2-cache" + * beneath CPU nodes. + */ + if (!strcmp(np->type, "cpu")) + for_each_child_of_node(np, child) + if (!strcmp(child->type, "cache")) + return child; + + return NULL; +} + +/** + * of_graph_parse_endpoint() - parse common endpoint node properties + * @node: pointer to endpoint device_node + * @endpoint: pointer to the OF endpoint data structure + * + * The caller should hold a reference to @node. + */ +int of_graph_parse_endpoint(const struct device_node *node, + struct of_endpoint *endpoint) +{ + struct device_node *port_node = of_get_parent(node); + + WARN_ONCE(!port_node, "%s(): endpoint %s has no parent node\n", + __func__, node->full_name); + + memset(endpoint, 0, sizeof(*endpoint)); + + endpoint->local_node = node; + /* + * It doesn't matter whether the two calls below succeed. + * If they don't then the default value 0 is used. + */ + of_property_read_u32(port_node, "reg", &endpoint->port); + of_property_read_u32(node, "reg", &endpoint->id); + + of_node_put(port_node); + + return 0; +} +EXPORT_SYMBOL(of_graph_parse_endpoint); + +/** + * of_graph_get_port_by_id() - get the port matching a given id + * @parent: pointer to the parent device node + * @id: id of the port + * + * Return: A 'port' node pointer with refcount incremented. The caller + * has to use of_node_put() on it when done. + */ +struct device_node *of_graph_get_port_by_id(struct device_node *parent, u32 id) +{ + struct device_node *node, *port; + + node = of_get_child_by_name(parent, "ports"); + if (node) + parent = node; + + for_each_child_of_node(parent, port) { + u32 port_id = 0; + + if (of_node_cmp(port->name, "port") != 0) + continue; + of_property_read_u32(port, "reg", &port_id); + if (id == port_id) + break; + } + + of_node_put(node); + + return port; +} +EXPORT_SYMBOL(of_graph_get_port_by_id); + +/** + * of_graph_get_next_endpoint() - get next endpoint node + * @parent: pointer to the parent device node + * @prev: previous endpoint node, or NULL to get first + * + * Return: An 'endpoint' node pointer with refcount incremented. Refcount + * of the passed @prev node is decremented. + */ +struct device_node *of_graph_get_next_endpoint(const struct device_node *parent, + struct device_node *prev) +{ + struct device_node *endpoint; + struct device_node *port; + + if (!parent) + return NULL; + + /* + * Start by locating the port node. If no previous endpoint is specified + * search for the first port node, otherwise get the previous endpoint + * parent port node. + */ + if (!prev) { + struct device_node *node; + + node = of_get_child_by_name(parent, "ports"); + if (node) + parent = node; + + port = of_get_child_by_name(parent, "port"); + of_node_put(node); + + if (!port) { + pr_err("%s(): no port node found in %s\n", + __func__, parent->full_name); + return NULL; + } + } else { + port = of_get_parent(prev); + if (WARN_ONCE(!port, "%s(): endpoint %s has no parent node\n", + __func__, prev->full_name)) + return NULL; + } + + while (1) { + /* + * Now that we have a port node, get the next endpoint by + * getting the next child. If the previous endpoint is NULL this + * will return the first child. + */ + endpoint = of_get_next_child(port, prev); + if (endpoint) { + of_node_put(port); + return endpoint; + } + + /* No more endpoints under this port, try the next one. */ + prev = NULL; + + do { + port = of_get_next_child(parent, port); + if (!port) + return NULL; + } while (of_node_cmp(port->name, "port")); + } +} +EXPORT_SYMBOL(of_graph_get_next_endpoint); + +/** + * of_graph_get_remote_port_parent() - get remote port's parent node + * @node: pointer to a local endpoint device_node + * + * Return: Remote device node associated with remote endpoint node linked + * to @node. Use of_node_put() on it when done. + */ +struct device_node *of_graph_get_remote_port_parent( + const struct device_node *node) +{ + struct device_node *np; + unsigned int depth; + + /* Get remote endpoint node. */ + np = of_parse_phandle(node, "remote-endpoint", 0); + + /* Walk 3 levels up only if there is 'ports' node. */ + for (depth = 3; depth && np; depth--) { + np = of_get_next_parent(np); + if (depth == 2 && of_node_cmp(np->name, "ports")) + break; + } + return np; +} +EXPORT_SYMBOL(of_graph_get_remote_port_parent); + +/** + * of_graph_get_remote_port() - get remote port node + * @node: pointer to a local endpoint device_node + * + * Return: Remote port node associated with remote endpoint node linked + * to @node. Use of_node_put() on it when done. + */ +struct device_node *of_graph_get_remote_port(const struct device_node *node) +{ + struct device_node *np; + + /* Get remote endpoint node. */ + np = of_parse_phandle(node, "remote-endpoint", 0); + if (!np) + return NULL; + return of_get_next_parent(np); +} +EXPORT_SYMBOL(of_graph_get_remote_port); diff --git a/drivers/of/device.c b/drivers/of/device.c new file mode 100644 index 000000000..20c1332a0 --- /dev/null +++ b/drivers/of/device.c @@ -0,0 +1,276 @@ +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/of_iommu.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/slab.h> + +#include <asm/errno.h> +#include "of_private.h" + +/** + * of_match_device - Tell if a struct device matches an of_device_id list + * @ids: array of of device match structures to search in + * @dev: the of device structure to match against + * + * Used by a driver to check whether an platform_device present in the + * system is in its list of supported devices. + */ +const struct of_device_id *of_match_device(const struct of_device_id *matches, + const struct device *dev) +{ + if ((!matches) || (!dev->of_node)) + return NULL; + return of_match_node(matches, dev->of_node); +} +EXPORT_SYMBOL(of_match_device); + +struct platform_device *of_dev_get(struct platform_device *dev) +{ + struct device *tmp; + + if (!dev) + return NULL; + tmp = get_device(&dev->dev); + if (tmp) + return to_platform_device(tmp); + else + return NULL; +} +EXPORT_SYMBOL(of_dev_get); + +void of_dev_put(struct platform_device *dev) +{ + if (dev) + put_device(&dev->dev); +} +EXPORT_SYMBOL(of_dev_put); + +int of_device_add(struct platform_device *ofdev) +{ + BUG_ON(ofdev->dev.of_node == NULL); + + /* name and id have to be set so that the platform bus doesn't get + * confused on matching */ + ofdev->name = dev_name(&ofdev->dev); + ofdev->id = -1; + + /* device_add will assume that this device is on the same node as + * the parent. If there is no parent defined, set the node + * explicitly */ + if (!ofdev->dev.parent) + set_dev_node(&ofdev->dev, of_node_to_nid(ofdev->dev.of_node)); + + return device_add(&ofdev->dev); +} + +/** + * of_dma_configure - Setup DMA configuration + * @dev: Device to apply DMA configuration + * @np: Pointer to OF node having DMA configuration + * + * Try to get devices's DMA configuration from DT and update it + * accordingly. + * + * If platform code needs to use its own special DMA configuration, it + * can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events + * to fix up DMA configuration. + */ +void of_dma_configure(struct device *dev, struct device_node *np) +{ + u64 dma_addr, paddr, size; + int ret; + bool coherent; + unsigned long offset; + struct iommu_ops *iommu; + + /* + * Set default coherent_dma_mask to 32 bit. Drivers are expected to + * setup the correct supported mask. + */ + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); + + /* + * Set it to coherent_dma_mask by default if the architecture + * code has not set it. + */ + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + + ret = of_dma_get_range(np, &dma_addr, &paddr, &size); + if (ret < 0) { + dma_addr = offset = 0; + size = dev->coherent_dma_mask + 1; + } else { + offset = PFN_DOWN(paddr - dma_addr); + + /* + * Add a work around to treat the size as mask + 1 in case + * it is defined in DT as a mask. + */ + if (size & 1) { + dev_warn(dev, "Invalid size 0x%llx for dma-range\n", + size); + size = size + 1; + } + + if (!size) { + dev_err(dev, "Adjusted size 0x%llx invalid\n", size); + return; + } + dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset); + } + + dev->dma_pfn_offset = offset; + + /* + * Limit coherent and dma mask based on size and default mask + * set by the driver. + */ + dev->coherent_dma_mask = min(dev->coherent_dma_mask, + DMA_BIT_MASK(ilog2(dma_addr + size))); + *dev->dma_mask = min((*dev->dma_mask), + DMA_BIT_MASK(ilog2(dma_addr + size))); + + coherent = of_dma_is_coherent(np); + dev_dbg(dev, "device is%sdma coherent\n", + coherent ? " " : " not "); + + iommu = of_iommu_configure(dev, np); + dev_dbg(dev, "device is%sbehind an iommu\n", + iommu ? " " : " not "); + + arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent); +} +EXPORT_SYMBOL_GPL(of_dma_configure); + +int of_device_register(struct platform_device *pdev) +{ + device_initialize(&pdev->dev); + return of_device_add(pdev); +} +EXPORT_SYMBOL(of_device_register); + +void of_device_unregister(struct platform_device *ofdev) +{ + device_unregister(&ofdev->dev); +} +EXPORT_SYMBOL(of_device_unregister); + +ssize_t of_device_get_modalias(struct device *dev, char *str, ssize_t len) +{ + const char *compat; + int cplen, i; + ssize_t tsize, csize, repend; + + if ((!dev) || (!dev->of_node)) + return -ENODEV; + + /* Name & Type */ + csize = snprintf(str, len, "of:N%sT%s", dev->of_node->name, + dev->of_node->type); + + /* Get compatible property if any */ + compat = of_get_property(dev->of_node, "compatible", &cplen); + if (!compat) + return csize; + + /* Find true end (we tolerate multiple \0 at the end */ + for (i = (cplen - 1); i >= 0 && !compat[i]; i--) + cplen--; + if (!cplen) + return csize; + cplen++; + + /* Check space (need cplen+1 chars including final \0) */ + tsize = csize + cplen; + repend = tsize; + + if (csize >= len) /* @ the limit, all is already filled */ + return tsize; + + if (tsize >= len) { /* limit compat list */ + cplen = len - csize - 1; + repend = len; + } + + /* Copy and do char replacement */ + memcpy(&str[csize + 1], compat, cplen); + for (i = csize; i < repend; i++) { + char c = str[i]; + if (c == '\0') + str[i] = 'C'; + else if (c == ' ') + str[i] = '_'; + } + + return tsize; +} + +/** + * of_device_uevent - Display OF related uevent information + */ +void of_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + const char *compat; + struct alias_prop *app; + int seen = 0, cplen, sl; + + if ((!dev) || (!dev->of_node)) + return; + + add_uevent_var(env, "OF_NAME=%s", dev->of_node->name); + add_uevent_var(env, "OF_FULLNAME=%s", dev->of_node->full_name); + if (dev->of_node->type && strcmp("<NULL>", dev->of_node->type) != 0) + add_uevent_var(env, "OF_TYPE=%s", dev->of_node->type); + + /* Since the compatible field can contain pretty much anything + * it's not really legal to split it out with commas. We split it + * up using a number of environment variables instead. */ + compat = of_get_property(dev->of_node, "compatible", &cplen); + while (compat && *compat && cplen > 0) { + add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat); + sl = strlen(compat) + 1; + compat += sl; + cplen -= sl; + seen++; + } + add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen); + + seen = 0; + mutex_lock(&of_mutex); + list_for_each_entry(app, &aliases_lookup, link) { + if (dev->of_node == app->np) { + add_uevent_var(env, "OF_ALIAS_%d=%s", seen, + app->alias); + seen++; + } + } + mutex_unlock(&of_mutex); +} + +int of_device_uevent_modalias(struct device *dev, struct kobj_uevent_env *env) +{ + int sl; + + if ((!dev) || (!dev->of_node)) + return -ENODEV; + + /* Devicetree modalias is tricky, we add it in 2 steps */ + if (add_uevent_var(env, "MODALIAS=")) + return -ENOMEM; + + sl = of_device_get_modalias(dev, &env->buf[env->buflen-1], + sizeof(env->buf) - env->buflen); + if (sl >= (sizeof(env->buf) - env->buflen)) + return -ENOMEM; + env->buflen += sl; + + return 0; +} diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c new file mode 100644 index 000000000..53826b84e --- /dev/null +++ b/drivers/of/dynamic.c @@ -0,0 +1,781 @@ +/* + * Support for dynamic device trees. + * + * On some platforms, the device tree can be manipulated at runtime. + * The routines in this section support adding, removing and changing + * device tree nodes. + */ + +#include <linux/of.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/proc_fs.h> + +#include "of_private.h" + +/** + * of_node_get() - Increment refcount of a node + * @node: Node to inc refcount, NULL is supported to simplify writing of + * callers + * + * Returns node. + */ +struct device_node *of_node_get(struct device_node *node) +{ + if (node) + kobject_get(&node->kobj); + return node; +} +EXPORT_SYMBOL(of_node_get); + +/** + * of_node_put() - Decrement refcount of a node + * @node: Node to dec refcount, NULL is supported to simplify writing of + * callers + */ +void of_node_put(struct device_node *node) +{ + if (node) + kobject_put(&node->kobj); +} +EXPORT_SYMBOL(of_node_put); + +void __of_detach_node_sysfs(struct device_node *np) +{ + struct property *pp; + + if (!IS_ENABLED(CONFIG_SYSFS)) + return; + + BUG_ON(!of_node_is_initialized(np)); + if (!of_kset) + return; + + /* only remove properties if on sysfs */ + if (of_node_is_attached(np)) { + for_each_property_of_node(np, pp) + sysfs_remove_bin_file(&np->kobj, &pp->attr); + kobject_del(&np->kobj); + } + + /* finally remove the kobj_init ref */ + of_node_put(np); +} + +static BLOCKING_NOTIFIER_HEAD(of_reconfig_chain); + +int of_reconfig_notifier_register(struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&of_reconfig_chain, nb); +} +EXPORT_SYMBOL_GPL(of_reconfig_notifier_register); + +int of_reconfig_notifier_unregister(struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&of_reconfig_chain, nb); +} +EXPORT_SYMBOL_GPL(of_reconfig_notifier_unregister); + +#ifdef DEBUG +const char *action_names[] = { + [OF_RECONFIG_ATTACH_NODE] = "ATTACH_NODE", + [OF_RECONFIG_DETACH_NODE] = "DETACH_NODE", + [OF_RECONFIG_ADD_PROPERTY] = "ADD_PROPERTY", + [OF_RECONFIG_REMOVE_PROPERTY] = "REMOVE_PROPERTY", + [OF_RECONFIG_UPDATE_PROPERTY] = "UPDATE_PROPERTY", +}; +#endif + +int of_reconfig_notify(unsigned long action, struct of_reconfig_data *p) +{ + int rc; +#ifdef DEBUG + struct of_reconfig_data *pr = p; + + switch (action) { + case OF_RECONFIG_ATTACH_NODE: + case OF_RECONFIG_DETACH_NODE: + pr_debug("of/notify %-15s %s\n", action_names[action], + pr->dn->full_name); + break; + case OF_RECONFIG_ADD_PROPERTY: + case OF_RECONFIG_REMOVE_PROPERTY: + case OF_RECONFIG_UPDATE_PROPERTY: + pr_debug("of/notify %-15s %s:%s\n", action_names[action], + pr->dn->full_name, pr->prop->name); + break; + + } +#endif + rc = blocking_notifier_call_chain(&of_reconfig_chain, action, p); + return notifier_to_errno(rc); +} + +/* + * of_reconfig_get_state_change() - Returns new state of device + * @action - action of the of notifier + * @arg - argument of the of notifier + * + * Returns the new state of a device based on the notifier used. + * Returns 0 on device going from enabled to disabled, 1 on device + * going from disabled to enabled and -1 on no change. + */ +int of_reconfig_get_state_change(unsigned long action, struct of_reconfig_data *pr) +{ + struct property *prop, *old_prop = NULL; + int is_status, status_state, old_status_state, prev_state, new_state; + + /* figure out if a device should be created or destroyed */ + switch (action) { + case OF_RECONFIG_ATTACH_NODE: + case OF_RECONFIG_DETACH_NODE: + prop = of_find_property(pr->dn, "status", NULL); + break; + case OF_RECONFIG_ADD_PROPERTY: + case OF_RECONFIG_REMOVE_PROPERTY: + prop = pr->prop; + break; + case OF_RECONFIG_UPDATE_PROPERTY: + prop = pr->prop; + old_prop = pr->old_prop; + break; + default: + return OF_RECONFIG_NO_CHANGE; + } + + is_status = 0; + status_state = -1; + old_status_state = -1; + prev_state = -1; + new_state = -1; + + if (prop && !strcmp(prop->name, "status")) { + is_status = 1; + status_state = !strcmp(prop->value, "okay") || + !strcmp(prop->value, "ok"); + if (old_prop) + old_status_state = !strcmp(old_prop->value, "okay") || + !strcmp(old_prop->value, "ok"); + } + + switch (action) { + case OF_RECONFIG_ATTACH_NODE: + prev_state = 0; + /* -1 & 0 status either missing or okay */ + new_state = status_state != 0; + break; + case OF_RECONFIG_DETACH_NODE: + /* -1 & 0 status either missing or okay */ + prev_state = status_state != 0; + new_state = 0; + break; + case OF_RECONFIG_ADD_PROPERTY: + if (is_status) { + /* no status property -> enabled (legacy) */ + prev_state = 1; + new_state = status_state; + } + break; + case OF_RECONFIG_REMOVE_PROPERTY: + if (is_status) { + prev_state = status_state; + /* no status property -> enabled (legacy) */ + new_state = 1; + } + break; + case OF_RECONFIG_UPDATE_PROPERTY: + if (is_status) { + prev_state = old_status_state != 0; + new_state = status_state != 0; + } + break; + } + + if (prev_state == new_state) + return OF_RECONFIG_NO_CHANGE; + + return new_state ? OF_RECONFIG_CHANGE_ADD : OF_RECONFIG_CHANGE_REMOVE; +} +EXPORT_SYMBOL_GPL(of_reconfig_get_state_change); + +int of_property_notify(int action, struct device_node *np, + struct property *prop, struct property *oldprop) +{ + struct of_reconfig_data pr; + + /* only call notifiers if the node is attached */ + if (!of_node_is_attached(np)) + return 0; + + pr.dn = np; + pr.prop = prop; + pr.old_prop = oldprop; + return of_reconfig_notify(action, &pr); +} + +void __of_attach_node(struct device_node *np) +{ + const __be32 *phandle; + int sz; + + np->name = __of_get_property(np, "name", NULL) ? : "<NULL>"; + np->type = __of_get_property(np, "device_type", NULL) ? : "<NULL>"; + + phandle = __of_get_property(np, "phandle", &sz); + if (!phandle) + phandle = __of_get_property(np, "linux,phandle", &sz); + if (IS_ENABLED(CONFIG_PPC_PSERIES) && !phandle) + phandle = __of_get_property(np, "ibm,phandle", &sz); + np->phandle = (phandle && (sz >= 4)) ? be32_to_cpup(phandle) : 0; + + np->child = NULL; + np->sibling = np->parent->child; + np->parent->child = np; + of_node_clear_flag(np, OF_DETACHED); +} + +/** + * of_attach_node() - Plug a device node into the tree and global list. + */ +int of_attach_node(struct device_node *np) +{ + struct of_reconfig_data rd; + unsigned long flags; + + memset(&rd, 0, sizeof(rd)); + rd.dn = np; + + mutex_lock(&of_mutex); + raw_spin_lock_irqsave(&devtree_lock, flags); + __of_attach_node(np); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + __of_attach_node_sysfs(np); + mutex_unlock(&of_mutex); + + of_reconfig_notify(OF_RECONFIG_ATTACH_NODE, &rd); + + return 0; +} + +void __of_detach_node(struct device_node *np) +{ + struct device_node *parent; + + if (WARN_ON(of_node_check_flag(np, OF_DETACHED))) + return; + + parent = np->parent; + if (WARN_ON(!parent)) + return; + + if (parent->child == np) + parent->child = np->sibling; + else { + struct device_node *prevsib; + for (prevsib = np->parent->child; + prevsib->sibling != np; + prevsib = prevsib->sibling) + ; + prevsib->sibling = np->sibling; + } + + of_node_set_flag(np, OF_DETACHED); +} + +/** + * of_detach_node() - "Unplug" a node from the device tree. + * + * The caller must hold a reference to the node. The memory associated with + * the node is not freed until its refcount goes to zero. + */ +int of_detach_node(struct device_node *np) +{ + struct of_reconfig_data rd; + unsigned long flags; + int rc = 0; + + memset(&rd, 0, sizeof(rd)); + rd.dn = np; + + mutex_lock(&of_mutex); + raw_spin_lock_irqsave(&devtree_lock, flags); + __of_detach_node(np); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + __of_detach_node_sysfs(np); + mutex_unlock(&of_mutex); + + of_reconfig_notify(OF_RECONFIG_DETACH_NODE, &rd); + + return rc; +} + +/** + * of_node_release() - release a dynamically allocated node + * @kref: kref element of the node to be released + * + * In of_node_put() this function is passed to kref_put() as the destructor. + */ +void of_node_release(struct kobject *kobj) +{ + struct device_node *node = kobj_to_device_node(kobj); + struct property *prop = node->properties; + + /* We should never be releasing nodes that haven't been detached. */ + if (!of_node_check_flag(node, OF_DETACHED)) { + pr_err("ERROR: Bad of_node_put() on %s\n", node->full_name); + dump_stack(); + return; + } + + if (!of_node_check_flag(node, OF_DYNAMIC)) + return; + + while (prop) { + struct property *next = prop->next; + kfree(prop->name); + kfree(prop->value); + kfree(prop); + prop = next; + + if (!prop) { + prop = node->deadprops; + node->deadprops = NULL; + } + } + kfree(node->full_name); + kfree(node->data); + kfree(node); +} + +/** + * __of_prop_dup - Copy a property dynamically. + * @prop: Property to copy + * @allocflags: Allocation flags (typically pass GFP_KERNEL) + * + * Copy a property by dynamically allocating the memory of both the + * property structure and the property name & contents. The property's + * flags have the OF_DYNAMIC bit set so that we can differentiate between + * dynamically allocated properties and not. + * Returns the newly allocated property or NULL on out of memory error. + */ +struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags) +{ + struct property *new; + + new = kzalloc(sizeof(*new), allocflags); + if (!new) + return NULL; + + /* + * NOTE: There is no check for zero length value. + * In case of a boolean property, this will allocate a value + * of zero bytes. We do this to work around the use + * of of_get_property() calls on boolean values. + */ + new->name = kstrdup(prop->name, allocflags); + new->value = kmemdup(prop->value, prop->length, allocflags); + new->length = prop->length; + if (!new->name || !new->value) + goto err_free; + + /* mark the property as dynamic */ + of_property_set_flag(new, OF_DYNAMIC); + + return new; + + err_free: + kfree(new->name); + kfree(new->value); + kfree(new); + return NULL; +} + +/** + * __of_node_dup() - Duplicate or create an empty device node dynamically. + * @fmt: Format string (plus vargs) for new full name of the device node + * + * Create an device tree node, either by duplicating an empty node or by allocating + * an empty one suitable for further modification. The node data are + * dynamically allocated and all the node flags have the OF_DYNAMIC & + * OF_DETACHED bits set. Returns the newly allocated node or NULL on out of + * memory error. + */ +struct device_node *__of_node_dup(const struct device_node *np, const char *fmt, ...) +{ + va_list vargs; + struct device_node *node; + + node = kzalloc(sizeof(*node), GFP_KERNEL); + if (!node) + return NULL; + va_start(vargs, fmt); + node->full_name = kvasprintf(GFP_KERNEL, fmt, vargs); + va_end(vargs); + if (!node->full_name) { + kfree(node); + return NULL; + } + + of_node_set_flag(node, OF_DYNAMIC); + of_node_set_flag(node, OF_DETACHED); + of_node_init(node); + + /* Iterate over and duplicate all properties */ + if (np) { + struct property *pp, *new_pp; + for_each_property_of_node(np, pp) { + new_pp = __of_prop_dup(pp, GFP_KERNEL); + if (!new_pp) + goto err_prop; + if (__of_add_property(node, new_pp)) { + kfree(new_pp->name); + kfree(new_pp->value); + kfree(new_pp); + goto err_prop; + } + } + } + return node; + + err_prop: + of_node_put(node); /* Frees the node and properties */ + return NULL; +} + +static void __of_changeset_entry_destroy(struct of_changeset_entry *ce) +{ + of_node_put(ce->np); + list_del(&ce->node); + kfree(ce); +} + +#ifdef DEBUG +static void __of_changeset_entry_dump(struct of_changeset_entry *ce) +{ + switch (ce->action) { + case OF_RECONFIG_ADD_PROPERTY: + case OF_RECONFIG_REMOVE_PROPERTY: + case OF_RECONFIG_UPDATE_PROPERTY: + pr_debug("of/cset<%p> %-15s %s/%s\n", ce, action_names[ce->action], + ce->np->full_name, ce->prop->name); + break; + case OF_RECONFIG_ATTACH_NODE: + case OF_RECONFIG_DETACH_NODE: + pr_debug("of/cset<%p> %-15s %s\n", ce, action_names[ce->action], + ce->np->full_name); + break; + } +} +#else +static inline void __of_changeset_entry_dump(struct of_changeset_entry *ce) +{ + /* empty */ +} +#endif + +static void __of_changeset_entry_invert(struct of_changeset_entry *ce, + struct of_changeset_entry *rce) +{ + memcpy(rce, ce, sizeof(*rce)); + + switch (ce->action) { + case OF_RECONFIG_ATTACH_NODE: + rce->action = OF_RECONFIG_DETACH_NODE; + break; + case OF_RECONFIG_DETACH_NODE: + rce->action = OF_RECONFIG_ATTACH_NODE; + break; + case OF_RECONFIG_ADD_PROPERTY: + rce->action = OF_RECONFIG_REMOVE_PROPERTY; + break; + case OF_RECONFIG_REMOVE_PROPERTY: + rce->action = OF_RECONFIG_ADD_PROPERTY; + break; + case OF_RECONFIG_UPDATE_PROPERTY: + rce->old_prop = ce->prop; + rce->prop = ce->old_prop; + break; + } +} + +static void __of_changeset_entry_notify(struct of_changeset_entry *ce, bool revert) +{ + struct of_reconfig_data rd; + struct of_changeset_entry ce_inverted; + int ret; + + if (revert) { + __of_changeset_entry_invert(ce, &ce_inverted); + ce = &ce_inverted; + } + + switch (ce->action) { + case OF_RECONFIG_ATTACH_NODE: + case OF_RECONFIG_DETACH_NODE: + memset(&rd, 0, sizeof(rd)); + rd.dn = ce->np; + ret = of_reconfig_notify(ce->action, &rd); + break; + case OF_RECONFIG_ADD_PROPERTY: + case OF_RECONFIG_REMOVE_PROPERTY: + case OF_RECONFIG_UPDATE_PROPERTY: + ret = of_property_notify(ce->action, ce->np, ce->prop, ce->old_prop); + break; + default: + pr_err("%s: invalid devicetree changeset action: %i\n", __func__, + (int)ce->action); + return; + } + + if (ret) + pr_err("%s: notifier error @%s\n", __func__, ce->np->full_name); +} + +static int __of_changeset_entry_apply(struct of_changeset_entry *ce) +{ + struct property *old_prop, **propp; + unsigned long flags; + int ret = 0; + + __of_changeset_entry_dump(ce); + + raw_spin_lock_irqsave(&devtree_lock, flags); + switch (ce->action) { + case OF_RECONFIG_ATTACH_NODE: + __of_attach_node(ce->np); + break; + case OF_RECONFIG_DETACH_NODE: + __of_detach_node(ce->np); + break; + case OF_RECONFIG_ADD_PROPERTY: + /* If the property is in deadprops then it must be removed */ + for (propp = &ce->np->deadprops; *propp; propp = &(*propp)->next) { + if (*propp == ce->prop) { + *propp = ce->prop->next; + ce->prop->next = NULL; + break; + } + } + + ret = __of_add_property(ce->np, ce->prop); + if (ret) { + pr_err("%s: add_property failed @%s/%s\n", + __func__, ce->np->full_name, + ce->prop->name); + break; + } + break; + case OF_RECONFIG_REMOVE_PROPERTY: + ret = __of_remove_property(ce->np, ce->prop); + if (ret) { + pr_err("%s: remove_property failed @%s/%s\n", + __func__, ce->np->full_name, + ce->prop->name); + break; + } + break; + + case OF_RECONFIG_UPDATE_PROPERTY: + /* If the property is in deadprops then it must be removed */ + for (propp = &ce->np->deadprops; *propp; propp = &(*propp)->next) { + if (*propp == ce->prop) { + *propp = ce->prop->next; + ce->prop->next = NULL; + break; + } + } + + ret = __of_update_property(ce->np, ce->prop, &old_prop); + if (ret) { + pr_err("%s: update_property failed @%s/%s\n", + __func__, ce->np->full_name, + ce->prop->name); + break; + } + break; + default: + ret = -EINVAL; + } + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + if (ret) + return ret; + + switch (ce->action) { + case OF_RECONFIG_ATTACH_NODE: + __of_attach_node_sysfs(ce->np); + break; + case OF_RECONFIG_DETACH_NODE: + __of_detach_node_sysfs(ce->np); + break; + case OF_RECONFIG_ADD_PROPERTY: + /* ignore duplicate names */ + __of_add_property_sysfs(ce->np, ce->prop); + break; + case OF_RECONFIG_REMOVE_PROPERTY: + __of_remove_property_sysfs(ce->np, ce->prop); + break; + case OF_RECONFIG_UPDATE_PROPERTY: + __of_update_property_sysfs(ce->np, ce->prop, ce->old_prop); + break; + } + + return 0; +} + +static inline int __of_changeset_entry_revert(struct of_changeset_entry *ce) +{ + struct of_changeset_entry ce_inverted; + + __of_changeset_entry_invert(ce, &ce_inverted); + return __of_changeset_entry_apply(&ce_inverted); +} + +/** + * of_changeset_init - Initialize a changeset for use + * + * @ocs: changeset pointer + * + * Initialize a changeset structure + */ +void of_changeset_init(struct of_changeset *ocs) +{ + memset(ocs, 0, sizeof(*ocs)); + INIT_LIST_HEAD(&ocs->entries); +} + +/** + * of_changeset_destroy - Destroy a changeset + * + * @ocs: changeset pointer + * + * Destroys a changeset. Note that if a changeset is applied, + * its changes to the tree cannot be reverted. + */ +void of_changeset_destroy(struct of_changeset *ocs) +{ + struct of_changeset_entry *ce, *cen; + + list_for_each_entry_safe_reverse(ce, cen, &ocs->entries, node) + __of_changeset_entry_destroy(ce); +} + +/** + * of_changeset_apply - Applies a changeset + * + * @ocs: changeset pointer + * + * Applies a changeset to the live tree. + * Any side-effects of live tree state changes are applied here on + * sucess, like creation/destruction of devices and side-effects + * like creation of sysfs properties and directories. + * Returns 0 on success, a negative error value in case of an error. + * On error the partially applied effects are reverted. + */ +int of_changeset_apply(struct of_changeset *ocs) +{ + struct of_changeset_entry *ce; + int ret; + + /* perform the rest of the work */ + pr_debug("of_changeset: applying...\n"); + list_for_each_entry(ce, &ocs->entries, node) { + ret = __of_changeset_entry_apply(ce); + if (ret) { + pr_err("%s: Error applying changeset (%d)\n", __func__, ret); + list_for_each_entry_continue_reverse(ce, &ocs->entries, node) + __of_changeset_entry_revert(ce); + return ret; + } + } + pr_debug("of_changeset: applied, emitting notifiers.\n"); + + /* drop the global lock while emitting notifiers */ + mutex_unlock(&of_mutex); + list_for_each_entry(ce, &ocs->entries, node) + __of_changeset_entry_notify(ce, 0); + mutex_lock(&of_mutex); + pr_debug("of_changeset: notifiers sent.\n"); + + return 0; +} + +/** + * of_changeset_revert - Reverts an applied changeset + * + * @ocs: changeset pointer + * + * Reverts a changeset returning the state of the tree to what it + * was before the application. + * Any side-effects like creation/destruction of devices and + * removal of sysfs properties and directories are applied. + * Returns 0 on success, a negative error value in case of an error. + */ +int of_changeset_revert(struct of_changeset *ocs) +{ + struct of_changeset_entry *ce; + int ret; + + pr_debug("of_changeset: reverting...\n"); + list_for_each_entry_reverse(ce, &ocs->entries, node) { + ret = __of_changeset_entry_revert(ce); + if (ret) { + pr_err("%s: Error reverting changeset (%d)\n", __func__, ret); + list_for_each_entry_continue(ce, &ocs->entries, node) + __of_changeset_entry_apply(ce); + return ret; + } + } + pr_debug("of_changeset: reverted, emitting notifiers.\n"); + + /* drop the global lock while emitting notifiers */ + mutex_unlock(&of_mutex); + list_for_each_entry_reverse(ce, &ocs->entries, node) + __of_changeset_entry_notify(ce, 1); + mutex_lock(&of_mutex); + pr_debug("of_changeset: notifiers sent.\n"); + + return 0; +} + +/** + * of_changeset_action - Perform a changeset action + * + * @ocs: changeset pointer + * @action: action to perform + * @np: Pointer to device node + * @prop: Pointer to property + * + * On action being one of: + * + OF_RECONFIG_ATTACH_NODE + * + OF_RECONFIG_DETACH_NODE, + * + OF_RECONFIG_ADD_PROPERTY + * + OF_RECONFIG_REMOVE_PROPERTY, + * + OF_RECONFIG_UPDATE_PROPERTY + * Returns 0 on success, a negative error value in case of an error. + */ +int of_changeset_action(struct of_changeset *ocs, unsigned long action, + struct device_node *np, struct property *prop) +{ + struct of_changeset_entry *ce; + + ce = kzalloc(sizeof(*ce), GFP_KERNEL); + if (!ce) { + pr_err("%s: Failed to allocate\n", __func__); + return -ENOMEM; + } + /* get a reference to the node */ + ce->action = action; + ce->np = of_node_get(np); + ce->prop = prop; + + if (action == OF_RECONFIG_UPDATE_PROPERTY && prop) + ce->old_prop = of_find_property(np, prop->name, NULL); + + /* add it to the list */ + list_add_tail(&ce->node, &ocs->entries); + return 0; +} diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c new file mode 100644 index 000000000..cde35c5d0 --- /dev/null +++ b/drivers/of/fdt.c @@ -0,0 +1,1145 @@ +/* + * Functions for working with the Flattened Device Tree data format + * + * Copyright 2009 Benjamin Herrenschmidt, IBM Corp + * benh@kernel.crashing.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/crc32.h> +#include <linux/kernel.h> +#include <linux/initrd.h> +#include <linux/memblock.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_reserved_mem.h> +#include <linux/sizes.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/libfdt.h> +#include <linux/debugfs.h> +#include <linux/serial_core.h> +#include <linux/sysfs.h> + +#include <asm/setup.h> /* for COMMAND_LINE_SIZE */ +#include <asm/page.h> + +/* + * of_fdt_limit_memory - limit the number of regions in the /memory node + * @limit: maximum entries + * + * Adjust the flattened device tree to have at most 'limit' number of + * memory entries in the /memory node. This function may be called + * any time after initial_boot_param is set. + */ +void of_fdt_limit_memory(int limit) +{ + int memory; + int len; + const void *val; + int nr_address_cells = OF_ROOT_NODE_ADDR_CELLS_DEFAULT; + int nr_size_cells = OF_ROOT_NODE_SIZE_CELLS_DEFAULT; + const uint32_t *addr_prop; + const uint32_t *size_prop; + int root_offset; + int cell_size; + + root_offset = fdt_path_offset(initial_boot_params, "/"); + if (root_offset < 0) + return; + + addr_prop = fdt_getprop(initial_boot_params, root_offset, + "#address-cells", NULL); + if (addr_prop) + nr_address_cells = fdt32_to_cpu(*addr_prop); + + size_prop = fdt_getprop(initial_boot_params, root_offset, + "#size-cells", NULL); + if (size_prop) + nr_size_cells = fdt32_to_cpu(*size_prop); + + cell_size = sizeof(uint32_t)*(nr_address_cells + nr_size_cells); + + memory = fdt_path_offset(initial_boot_params, "/memory"); + if (memory > 0) { + val = fdt_getprop(initial_boot_params, memory, "reg", &len); + if (len > limit*cell_size) { + len = limit*cell_size; + pr_debug("Limiting number of entries to %d\n", limit); + fdt_setprop(initial_boot_params, memory, "reg", val, + len); + } + } +} + +/** + * of_fdt_is_compatible - Return true if given node from the given blob has + * compat in its compatible list + * @blob: A device tree blob + * @node: node to test + * @compat: compatible string to compare with compatible list. + * + * On match, returns a non-zero value with smaller values returned for more + * specific compatible values. + */ +int of_fdt_is_compatible(const void *blob, + unsigned long node, const char *compat) +{ + const char *cp; + int cplen; + unsigned long l, score = 0; + + cp = fdt_getprop(blob, node, "compatible", &cplen); + if (cp == NULL) + return 0; + while (cplen > 0) { + score++; + if (of_compat_cmp(cp, compat, strlen(compat)) == 0) + return score; + l = strlen(cp) + 1; + cp += l; + cplen -= l; + } + + return 0; +} + +/** + * of_fdt_is_big_endian - Return true if given node needs BE MMIO accesses + * @blob: A device tree blob + * @node: node to test + * + * Returns true if the node has a "big-endian" property, or if the kernel + * was compiled for BE *and* the node has a "native-endian" property. + * Returns false otherwise. + */ +bool of_fdt_is_big_endian(const void *blob, unsigned long node) +{ + if (fdt_getprop(blob, node, "big-endian", NULL)) + return true; + if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && + fdt_getprop(blob, node, "native-endian", NULL)) + return true; + return false; +} + +/** + * of_fdt_match - Return true if node matches a list of compatible values + */ +int of_fdt_match(const void *blob, unsigned long node, + const char *const *compat) +{ + unsigned int tmp, score = 0; + + if (!compat) + return 0; + + while (*compat) { + tmp = of_fdt_is_compatible(blob, node, *compat); + if (tmp && (score == 0 || (tmp < score))) + score = tmp; + compat++; + } + + return score; +} + +static void *unflatten_dt_alloc(void **mem, unsigned long size, + unsigned long align) +{ + void *res; + + *mem = PTR_ALIGN(*mem, align); + res = *mem; + *mem += size; + + return res; +} + +/** + * unflatten_dt_node - Alloc and populate a device_node from the flat tree + * @blob: The parent device tree blob + * @mem: Memory chunk to use for allocating device nodes and properties + * @p: pointer to node in flat tree + * @dad: Parent struct device_node + * @fpsize: Size of the node path up at the current depth. + */ +static void * unflatten_dt_node(void *blob, + void *mem, + int *poffset, + struct device_node *dad, + struct device_node **nodepp, + unsigned long fpsize, + bool dryrun) +{ + const __be32 *p; + struct device_node *np; + struct property *pp, **prev_pp = NULL; + const char *pathp; + unsigned int l, allocl; + static int depth = 0; + int old_depth; + int offset; + int has_name = 0; + int new_format = 0; + + pathp = fdt_get_name(blob, *poffset, &l); + if (!pathp) + return mem; + + allocl = ++l; + + /* version 0x10 has a more compact unit name here instead of the full + * path. we accumulate the full path size using "fpsize", we'll rebuild + * it later. We detect this because the first character of the name is + * not '/'. + */ + if ((*pathp) != '/') { + new_format = 1; + if (fpsize == 0) { + /* root node: special case. fpsize accounts for path + * plus terminating zero. root node only has '/', so + * fpsize should be 2, but we want to avoid the first + * level nodes to have two '/' so we use fpsize 1 here + */ + fpsize = 1; + allocl = 2; + l = 1; + pathp = ""; + } else { + /* account for '/' and path size minus terminal 0 + * already in 'l' + */ + fpsize += l; + allocl = fpsize; + } + } + + np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl, + __alignof__(struct device_node)); + if (!dryrun) { + char *fn; + of_node_init(np); + np->full_name = fn = ((char *)np) + sizeof(*np); + if (new_format) { + /* rebuild full path for new format */ + if (dad && dad->parent) { + strcpy(fn, dad->full_name); +#ifdef DEBUG + if ((strlen(fn) + l + 1) != allocl) { + pr_debug("%s: p: %d, l: %d, a: %d\n", + pathp, (int)strlen(fn), + l, allocl); + } +#endif + fn += strlen(fn); + } + *(fn++) = '/'; + } + memcpy(fn, pathp, l); + + prev_pp = &np->properties; + if (dad != NULL) { + np->parent = dad; + np->sibling = dad->child; + dad->child = np; + } + } + /* process properties */ + for (offset = fdt_first_property_offset(blob, *poffset); + (offset >= 0); + (offset = fdt_next_property_offset(blob, offset))) { + const char *pname; + u32 sz; + + if (!(p = fdt_getprop_by_offset(blob, offset, &pname, &sz))) { + offset = -FDT_ERR_INTERNAL; + break; + } + + if (pname == NULL) { + pr_info("Can't find property name in list !\n"); + break; + } + if (strcmp(pname, "name") == 0) + has_name = 1; + pp = unflatten_dt_alloc(&mem, sizeof(struct property), + __alignof__(struct property)); + if (!dryrun) { + /* We accept flattened tree phandles either in + * ePAPR-style "phandle" properties, or the + * legacy "linux,phandle" properties. If both + * appear and have different values, things + * will get weird. Don't do that. */ + if ((strcmp(pname, "phandle") == 0) || + (strcmp(pname, "linux,phandle") == 0)) { + if (np->phandle == 0) + np->phandle = be32_to_cpup(p); + } + /* And we process the "ibm,phandle" property + * used in pSeries dynamic device tree + * stuff */ + if (strcmp(pname, "ibm,phandle") == 0) + np->phandle = be32_to_cpup(p); + pp->name = (char *)pname; + pp->length = sz; + pp->value = (__be32 *)p; + *prev_pp = pp; + prev_pp = &pp->next; + } + } + /* with version 0x10 we may not have the name property, recreate + * it here from the unit name if absent + */ + if (!has_name) { + const char *p1 = pathp, *ps = pathp, *pa = NULL; + int sz; + + while (*p1) { + if ((*p1) == '@') + pa = p1; + if ((*p1) == '/') + ps = p1 + 1; + p1++; + } + if (pa < ps) + pa = p1; + sz = (pa - ps) + 1; + pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz, + __alignof__(struct property)); + if (!dryrun) { + pp->name = "name"; + pp->length = sz; + pp->value = pp + 1; + *prev_pp = pp; + prev_pp = &pp->next; + memcpy(pp->value, ps, sz - 1); + ((char *)pp->value)[sz - 1] = 0; + pr_debug("fixed up name for %s -> %s\n", pathp, + (char *)pp->value); + } + } + if (!dryrun) { + *prev_pp = NULL; + np->name = of_get_property(np, "name", NULL); + np->type = of_get_property(np, "device_type", NULL); + + if (!np->name) + np->name = "<NULL>"; + if (!np->type) + np->type = "<NULL>"; + } + + old_depth = depth; + *poffset = fdt_next_node(blob, *poffset, &depth); + if (depth < 0) + depth = 0; + while (*poffset > 0 && depth > old_depth) + mem = unflatten_dt_node(blob, mem, poffset, np, NULL, + fpsize, dryrun); + + if (*poffset < 0 && *poffset != -FDT_ERR_NOTFOUND) + pr_err("unflatten: error %d processing FDT\n", *poffset); + + /* + * Reverse the child list. Some drivers assumes node order matches .dts + * node order + */ + if (!dryrun && np->child) { + struct device_node *child = np->child; + np->child = NULL; + while (child) { + struct device_node *next = child->sibling; + child->sibling = np->child; + np->child = child; + child = next; + } + } + + if (nodepp) + *nodepp = np; + + return mem; +} + +/** + * __unflatten_device_tree - create tree of device_nodes from flat blob + * + * unflattens a device-tree, creating the + * tree of struct device_node. It also fills the "name" and "type" + * pointers of the nodes so the normal device-tree walking functions + * can be used. + * @blob: The blob to expand + * @mynodes: The device_node tree created by the call + * @dt_alloc: An allocator that provides a virtual address to memory + * for the resulting tree + */ +static void __unflatten_device_tree(void *blob, + struct device_node **mynodes, + void * (*dt_alloc)(u64 size, u64 align)) +{ + unsigned long size; + int start; + void *mem; + + pr_debug(" -> unflatten_device_tree()\n"); + + if (!blob) { + pr_debug("No device tree pointer\n"); + return; + } + + pr_debug("Unflattening device tree:\n"); + pr_debug("magic: %08x\n", fdt_magic(blob)); + pr_debug("size: %08x\n", fdt_totalsize(blob)); + pr_debug("version: %08x\n", fdt_version(blob)); + + if (fdt_check_header(blob)) { + pr_err("Invalid device tree blob header\n"); + return; + } + + /* First pass, scan for size */ + start = 0; + size = (unsigned long)unflatten_dt_node(blob, NULL, &start, NULL, NULL, 0, true); + size = ALIGN(size, 4); + + pr_debug(" size is %lx, allocating...\n", size); + + /* Allocate memory for the expanded device tree */ + mem = dt_alloc(size + 4, __alignof__(struct device_node)); + memset(mem, 0, size); + + *(__be32 *)(mem + size) = cpu_to_be32(0xdeadbeef); + + pr_debug(" unflattening %p...\n", mem); + + /* Second pass, do actual unflattening */ + start = 0; + unflatten_dt_node(blob, mem, &start, NULL, mynodes, 0, false); + if (be32_to_cpup(mem + size) != 0xdeadbeef) + pr_warning("End of tree marker overwritten: %08x\n", + be32_to_cpup(mem + size)); + + pr_debug(" <- unflatten_device_tree()\n"); +} + +static void *kernel_tree_alloc(u64 size, u64 align) +{ + return kzalloc(size, GFP_KERNEL); +} + +/** + * of_fdt_unflatten_tree - create tree of device_nodes from flat blob + * + * unflattens the device-tree passed by the firmware, creating the + * tree of struct device_node. It also fills the "name" and "type" + * pointers of the nodes so the normal device-tree walking functions + * can be used. + */ +void of_fdt_unflatten_tree(unsigned long *blob, + struct device_node **mynodes) +{ + __unflatten_device_tree(blob, mynodes, &kernel_tree_alloc); +} +EXPORT_SYMBOL_GPL(of_fdt_unflatten_tree); + +/* Everything below here references initial_boot_params directly. */ +int __initdata dt_root_addr_cells; +int __initdata dt_root_size_cells; + +void *initial_boot_params; + +#ifdef CONFIG_OF_EARLY_FLATTREE + +static u32 of_fdt_crc32; + +/** + * res_mem_reserve_reg() - reserve all memory described in 'reg' property + */ +static int __init __reserved_mem_reserve_reg(unsigned long node, + const char *uname) +{ + int t_len = (dt_root_addr_cells + dt_root_size_cells) * sizeof(__be32); + phys_addr_t base, size; + int len; + const __be32 *prop; + int nomap, first = 1; + + prop = of_get_flat_dt_prop(node, "reg", &len); + if (!prop) + return -ENOENT; + + if (len && len % t_len != 0) { + pr_err("Reserved memory: invalid reg property in '%s', skipping node.\n", + uname); + return -EINVAL; + } + + nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL; + + while (len >= t_len) { + base = dt_mem_next_cell(dt_root_addr_cells, &prop); + size = dt_mem_next_cell(dt_root_size_cells, &prop); + + if (size && + early_init_dt_reserve_memory_arch(base, size, nomap) == 0) + pr_debug("Reserved memory: reserved region for node '%s': base %pa, size %ld MiB\n", + uname, &base, (unsigned long)size / SZ_1M); + else + pr_info("Reserved memory: failed to reserve memory for node '%s': base %pa, size %ld MiB\n", + uname, &base, (unsigned long)size / SZ_1M); + + len -= t_len; + if (first) { + fdt_reserved_mem_save_node(node, uname, base, size); + first = 0; + } + } + return 0; +} + +/** + * __reserved_mem_check_root() - check if #size-cells, #address-cells provided + * in /reserved-memory matches the values supported by the current implementation, + * also check if ranges property has been provided + */ +static int __init __reserved_mem_check_root(unsigned long node) +{ + const __be32 *prop; + + prop = of_get_flat_dt_prop(node, "#size-cells", NULL); + if (!prop || be32_to_cpup(prop) != dt_root_size_cells) + return -EINVAL; + + prop = of_get_flat_dt_prop(node, "#address-cells", NULL); + if (!prop || be32_to_cpup(prop) != dt_root_addr_cells) + return -EINVAL; + + prop = of_get_flat_dt_prop(node, "ranges", NULL); + if (!prop) + return -EINVAL; + return 0; +} + +/** + * fdt_scan_reserved_mem() - scan a single FDT node for reserved memory + */ +static int __init __fdt_scan_reserved_mem(unsigned long node, const char *uname, + int depth, void *data) +{ + static int found; + const char *status; + int err; + + if (!found && depth == 1 && strcmp(uname, "reserved-memory") == 0) { + if (__reserved_mem_check_root(node) != 0) { + pr_err("Reserved memory: unsupported node format, ignoring\n"); + /* break scan */ + return 1; + } + found = 1; + /* scan next node */ + return 0; + } else if (!found) { + /* scan next node */ + return 0; + } else if (found && depth < 2) { + /* scanning of /reserved-memory has been finished */ + return 1; + } + + status = of_get_flat_dt_prop(node, "status", NULL); + if (status && strcmp(status, "okay") != 0 && strcmp(status, "ok") != 0) + return 0; + + err = __reserved_mem_reserve_reg(node, uname); + if (err == -ENOENT && of_get_flat_dt_prop(node, "size", NULL)) + fdt_reserved_mem_save_node(node, uname, 0, 0); + + /* scan next node */ + return 0; +} + +/** + * early_init_fdt_scan_reserved_mem() - create reserved memory regions + * + * This function grabs memory from early allocator for device exclusive use + * defined in device tree structures. It should be called by arch specific code + * once the early allocator (i.e. memblock) has been fully activated. + */ +void __init early_init_fdt_scan_reserved_mem(void) +{ + int n; + u64 base, size; + + if (!initial_boot_params) + return; + + /* Reserve the dtb region */ + early_init_dt_reserve_memory_arch(__pa(initial_boot_params), + fdt_totalsize(initial_boot_params), + 0); + + /* Process header /memreserve/ fields */ + for (n = 0; ; n++) { + fdt_get_mem_rsv(initial_boot_params, n, &base, &size); + if (!size) + break; + early_init_dt_reserve_memory_arch(base, size, 0); + } + + of_scan_flat_dt(__fdt_scan_reserved_mem, NULL); + fdt_init_reserved_mem(); +} + +/** + * of_scan_flat_dt - scan flattened tree blob and call callback on each. + * @it: callback function + * @data: context data pointer + * + * This function is used to scan the flattened device-tree, it is + * used to extract the memory information at boot before we can + * unflatten the tree + */ +int __init of_scan_flat_dt(int (*it)(unsigned long node, + const char *uname, int depth, + void *data), + void *data) +{ + const void *blob = initial_boot_params; + const char *pathp; + int offset, rc = 0, depth = -1; + + for (offset = fdt_next_node(blob, -1, &depth); + offset >= 0 && depth >= 0 && !rc; + offset = fdt_next_node(blob, offset, &depth)) { + + pathp = fdt_get_name(blob, offset, NULL); + if (*pathp == '/') + pathp = kbasename(pathp); + rc = it(offset, pathp, depth, data); + } + return rc; +} + +/** + * of_get_flat_dt_root - find the root node in the flat blob + */ +unsigned long __init of_get_flat_dt_root(void) +{ + return 0; +} + +/** + * of_get_flat_dt_size - Return the total size of the FDT + */ +int __init of_get_flat_dt_size(void) +{ + return fdt_totalsize(initial_boot_params); +} + +/** + * of_get_flat_dt_prop - Given a node in the flat blob, return the property ptr + * + * This function can be used within scan_flattened_dt callback to get + * access to properties + */ +const void *__init of_get_flat_dt_prop(unsigned long node, const char *name, + int *size) +{ + return fdt_getprop(initial_boot_params, node, name, size); +} + +/** + * of_flat_dt_is_compatible - Return true if given node has compat in compatible list + * @node: node to test + * @compat: compatible string to compare with compatible list. + */ +int __init of_flat_dt_is_compatible(unsigned long node, const char *compat) +{ + return of_fdt_is_compatible(initial_boot_params, node, compat); +} + +/** + * of_flat_dt_match - Return true if node matches a list of compatible values + */ +int __init of_flat_dt_match(unsigned long node, const char *const *compat) +{ + return of_fdt_match(initial_boot_params, node, compat); +} + +struct fdt_scan_status { + const char *name; + int namelen; + int depth; + int found; + int (*iterator)(unsigned long node, const char *uname, int depth, void *data); + void *data; +}; + +const char * __init of_flat_dt_get_machine_name(void) +{ + const char *name; + unsigned long dt_root = of_get_flat_dt_root(); + + name = of_get_flat_dt_prop(dt_root, "model", NULL); + if (!name) + name = of_get_flat_dt_prop(dt_root, "compatible", NULL); + return name; +} + +/** + * of_flat_dt_match_machine - Iterate match tables to find matching machine. + * + * @default_match: A machine specific ptr to return in case of no match. + * @get_next_compat: callback function to return next compatible match table. + * + * Iterate through machine match tables to find the best match for the machine + * compatible string in the FDT. + */ +const void * __init of_flat_dt_match_machine(const void *default_match, + const void * (*get_next_compat)(const char * const**)) +{ + const void *data = NULL; + const void *best_data = default_match; + const char *const *compat; + unsigned long dt_root; + unsigned int best_score = ~1, score = 0; + + dt_root = of_get_flat_dt_root(); + while ((data = get_next_compat(&compat))) { + score = of_flat_dt_match(dt_root, compat); + if (score > 0 && score < best_score) { + best_data = data; + best_score = score; + } + } + if (!best_data) { + const char *prop; + int size; + + pr_err("\n unrecognized device tree list:\n[ "); + + prop = of_get_flat_dt_prop(dt_root, "compatible", &size); + if (prop) { + while (size > 0) { + printk("'%s' ", prop); + size -= strlen(prop) + 1; + prop += strlen(prop) + 1; + } + } + printk("]\n\n"); + return NULL; + } + + pr_info("Machine model: %s\n", of_flat_dt_get_machine_name()); + + return best_data; +} + +#ifdef CONFIG_BLK_DEV_INITRD +/** + * early_init_dt_check_for_initrd - Decode initrd location from flat tree + * @node: reference to node containing initrd location ('chosen') + */ +static void __init early_init_dt_check_for_initrd(unsigned long node) +{ + u64 start, end; + int len; + const __be32 *prop; + + pr_debug("Looking for initrd properties... "); + + prop = of_get_flat_dt_prop(node, "linux,initrd-start", &len); + if (!prop) + return; + start = of_read_number(prop, len/4); + + prop = of_get_flat_dt_prop(node, "linux,initrd-end", &len); + if (!prop) + return; + end = of_read_number(prop, len/4); + + initrd_start = (unsigned long)__va(start); + initrd_end = (unsigned long)__va(end); + initrd_below_start_ok = 1; + + pr_debug("initrd_start=0x%llx initrd_end=0x%llx\n", + (unsigned long long)start, (unsigned long long)end); +} +#else +static inline void early_init_dt_check_for_initrd(unsigned long node) +{ +} +#endif /* CONFIG_BLK_DEV_INITRD */ + +#ifdef CONFIG_SERIAL_EARLYCON +extern struct of_device_id __earlycon_of_table[]; + +static int __init early_init_dt_scan_chosen_serial(void) +{ + int offset; + const char *p; + int l; + const struct of_device_id *match = __earlycon_of_table; + const void *fdt = initial_boot_params; + + offset = fdt_path_offset(fdt, "/chosen"); + if (offset < 0) + offset = fdt_path_offset(fdt, "/chosen@0"); + if (offset < 0) + return -ENOENT; + + p = fdt_getprop(fdt, offset, "stdout-path", &l); + if (!p) + p = fdt_getprop(fdt, offset, "linux,stdout-path", &l); + if (!p || !l) + return -ENOENT; + + /* Get the node specified by stdout-path */ + offset = fdt_path_offset(fdt, p); + if (offset < 0) + return -ENODEV; + + while (match->compatible[0]) { + unsigned long addr; + if (fdt_node_check_compatible(fdt, offset, match->compatible)) { + match++; + continue; + } + + addr = fdt_translate_address(fdt, offset); + if (!addr) + return -ENXIO; + + of_setup_earlycon(addr, match->data); + return 0; + } + return -ENODEV; +} + +static int __init setup_of_earlycon(char *buf) +{ + if (buf) + return 0; + + return early_init_dt_scan_chosen_serial(); +} +early_param("earlycon", setup_of_earlycon); +#endif + +/** + * early_init_dt_scan_root - fetch the top level address and size cells + */ +int __init early_init_dt_scan_root(unsigned long node, const char *uname, + int depth, void *data) +{ + const __be32 *prop; + + if (depth != 0) + return 0; + + dt_root_size_cells = OF_ROOT_NODE_SIZE_CELLS_DEFAULT; + dt_root_addr_cells = OF_ROOT_NODE_ADDR_CELLS_DEFAULT; + + prop = of_get_flat_dt_prop(node, "#size-cells", NULL); + if (prop) + dt_root_size_cells = be32_to_cpup(prop); + pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells); + + prop = of_get_flat_dt_prop(node, "#address-cells", NULL); + if (prop) + dt_root_addr_cells = be32_to_cpup(prop); + pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells); + + /* break now */ + return 1; +} + +u64 __init dt_mem_next_cell(int s, const __be32 **cellp) +{ + const __be32 *p = *cellp; + + *cellp = p + s; + return of_read_number(p, s); +} + +/** + * early_init_dt_scan_memory - Look for an parse memory nodes + */ +int __init early_init_dt_scan_memory(unsigned long node, const char *uname, + int depth, void *data) +{ + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *reg, *endp; + int l; + + /* We are scanning "memory" nodes only */ + if (type == NULL) { + /* + * The longtrail doesn't have a device_type on the + * /memory node, so look for the node called /memory@0. + */ + if (!IS_ENABLED(CONFIG_PPC32) || depth != 1 || strcmp(uname, "memory@0") != 0) + return 0; + } else if (strcmp(type, "memory") != 0) + return 0; + + reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); + if (reg == NULL) + reg = of_get_flat_dt_prop(node, "reg", &l); + if (reg == NULL) + return 0; + + endp = reg + (l / sizeof(__be32)); + + pr_debug("memory scan node %s, reg size %d,\n", uname, l); + + while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { + u64 base, size; + + base = dt_mem_next_cell(dt_root_addr_cells, ®); + size = dt_mem_next_cell(dt_root_size_cells, ®); + + if (size == 0) + continue; + pr_debug(" - %llx , %llx\n", (unsigned long long)base, + (unsigned long long)size); + + early_init_dt_add_memory_arch(base, size); + } + + return 0; +} + +int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, + int depth, void *data) +{ + int l; + const char *p; + + pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); + + if (depth != 1 || !data || + (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) + return 0; + + early_init_dt_check_for_initrd(node); + + /* Retrieve command line */ + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) + strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); + + /* + * CONFIG_CMDLINE is meant to be a default in case nothing else + * managed to set the command line, unless CONFIG_CMDLINE_FORCE + * is set in which case we override whatever was found earlier. + */ +#ifdef CONFIG_CMDLINE +#ifndef CONFIG_CMDLINE_FORCE + if (!((char *)data)[0]) +#endif + strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE); +#endif /* CONFIG_CMDLINE */ + + pr_debug("Command line is: %s\n", (char*)data); + + /* break now */ + return 1; +} + +#ifdef CONFIG_HAVE_MEMBLOCK +#define MAX_PHYS_ADDR ((phys_addr_t)~0) + +void __init __weak early_init_dt_add_memory_arch(u64 base, u64 size) +{ + const u64 phys_offset = __pa(PAGE_OFFSET); + + if (!PAGE_ALIGNED(base)) { + if (size < PAGE_SIZE - (base & ~PAGE_MASK)) { + pr_warn("Ignoring memory block 0x%llx - 0x%llx\n", + base, base + size); + return; + } + size -= PAGE_SIZE - (base & ~PAGE_MASK); + base = PAGE_ALIGN(base); + } + size &= PAGE_MASK; + + if (base > MAX_PHYS_ADDR) { + pr_warning("Ignoring memory block 0x%llx - 0x%llx\n", + base, base + size); + return; + } + + if (base + size - 1 > MAX_PHYS_ADDR) { + pr_warning("Ignoring memory range 0x%llx - 0x%llx\n", + ((u64)MAX_PHYS_ADDR) + 1, base + size); + size = MAX_PHYS_ADDR - base + 1; + } + + if (base + size < phys_offset) { + pr_warning("Ignoring memory block 0x%llx - 0x%llx\n", + base, base + size); + return; + } + if (base < phys_offset) { + pr_warning("Ignoring memory range 0x%llx - 0x%llx\n", + base, phys_offset); + size -= phys_offset - base; + base = phys_offset; + } + memblock_add(base, size); +} + +int __init __weak early_init_dt_reserve_memory_arch(phys_addr_t base, + phys_addr_t size, bool nomap) +{ + if (nomap) + return memblock_remove(base, size); + return memblock_reserve(base, size); +} + +/* + * called from unflatten_device_tree() to bootstrap devicetree itself + * Architectures can override this definition if memblock isn't used + */ +void * __init __weak early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return __va(memblock_alloc(size, align)); +} +#else +int __init __weak early_init_dt_reserve_memory_arch(phys_addr_t base, + phys_addr_t size, bool nomap) +{ + pr_err("Reserved memory not supported, ignoring range 0x%pa - 0x%pa%s\n", + &base, &size, nomap ? " (nomap)" : ""); + return -ENOSYS; +} +#endif + +bool __init early_init_dt_verify(void *params) +{ + if (!params) + return false; + + /* check device tree validity */ + if (fdt_check_header(params)) + return false; + + /* Setup flat device-tree pointer */ + initial_boot_params = params; + of_fdt_crc32 = crc32_be(~0, initial_boot_params, + fdt_totalsize(initial_boot_params)); + return true; +} + + +void __init early_init_dt_scan_nodes(void) +{ + /* Retrieve various information from the /chosen node */ + of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line); + + /* Initialize {size,address}-cells info */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + + /* Setup memory, calling early_init_dt_add_memory_arch */ + of_scan_flat_dt(early_init_dt_scan_memory, NULL); +} + +bool __init early_init_dt_scan(void *params) +{ + bool status; + + status = early_init_dt_verify(params); + if (!status) + return false; + + early_init_dt_scan_nodes(); + return true; +} + +/** + * unflatten_device_tree - create tree of device_nodes from flat blob + * + * unflattens the device-tree passed by the firmware, creating the + * tree of struct device_node. It also fills the "name" and "type" + * pointers of the nodes so the normal device-tree walking functions + * can be used. + */ +void __init unflatten_device_tree(void) +{ + __unflatten_device_tree(initial_boot_params, &of_root, + early_init_dt_alloc_memory_arch); + + /* Get pointer to "/chosen" and "/aliases" nodes for use everywhere */ + of_alias_scan(early_init_dt_alloc_memory_arch); +} + +/** + * unflatten_and_copy_device_tree - copy and create tree of device_nodes from flat blob + * + * Copies and unflattens the device-tree passed by the firmware, creating the + * tree of struct device_node. It also fills the "name" and "type" + * pointers of the nodes so the normal device-tree walking functions + * can be used. This should only be used when the FDT memory has not been + * reserved such is the case when the FDT is built-in to the kernel init + * section. If the FDT memory is reserved already then unflatten_device_tree + * should be used instead. + */ +void __init unflatten_and_copy_device_tree(void) +{ + int size; + void *dt; + + if (!initial_boot_params) { + pr_warn("No valid device tree found, continuing without\n"); + return; + } + + size = fdt_totalsize(initial_boot_params); + dt = early_init_dt_alloc_memory_arch(size, + roundup_pow_of_two(FDT_V17_SIZE)); + + if (dt) { + memcpy(dt, initial_boot_params, size); + initial_boot_params = dt; + } + unflatten_device_tree(); +} + +#ifdef CONFIG_SYSFS +static ssize_t of_fdt_raw_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + memcpy(buf, initial_boot_params + off, count); + return count; +} + +static int __init of_fdt_raw_init(void) +{ + static struct bin_attribute of_fdt_raw_attr = + __BIN_ATTR(fdt, S_IRUSR, of_fdt_raw_read, NULL, 0); + + if (!initial_boot_params) + return 0; + + if (of_fdt_crc32 != crc32_be(~0, initial_boot_params, + fdt_totalsize(initial_boot_params))) { + pr_warn("fdt: not creating '/sys/firmware/fdt': CRC check failed\n"); + return 0; + } + of_fdt_raw_attr.size = fdt_totalsize(initial_boot_params); + return sysfs_create_bin_file(firmware_kobj, &of_fdt_raw_attr); +} +late_initcall(of_fdt_raw_init); +#endif + +#endif /* CONFIG_OF_EARLY_FLATTREE */ diff --git a/drivers/of/fdt_address.c b/drivers/of/fdt_address.c new file mode 100644 index 000000000..8d3dc6fbd --- /dev/null +++ b/drivers/of/fdt_address.c @@ -0,0 +1,241 @@ +/* + * FDT Address translation based on u-boot fdt_support.c which in turn was + * based on the kernel unflattened DT address translation code. + * + * (C) Copyright 2007 + * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + */ +#include <linux/kernel.h> +#include <linux/libfdt.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/sizes.h> + +/* Max address size we deal with */ +#define OF_MAX_ADDR_CELLS 4 +#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ + (ns) > 0) + +/* Debug utility */ +#ifdef DEBUG +static void __init of_dump_addr(const char *s, const __be32 *addr, int na) +{ + pr_debug("%s", s); + while(na--) + pr_cont(" %08x", *(addr++)); + pr_debug("\n"); +} +#else +static void __init of_dump_addr(const char *s, const __be32 *addr, int na) { } +#endif + +/* Callbacks for bus specific translators */ +struct of_bus { + void (*count_cells)(const void *blob, int parentoffset, + int *addrc, int *sizec); + u64 (*map)(__be32 *addr, const __be32 *range, + int na, int ns, int pna); + int (*translate)(__be32 *addr, u64 offset, int na); +}; + +/* Default translator (generic bus) */ +static void __init fdt_bus_default_count_cells(const void *blob, int parentoffset, + int *addrc, int *sizec) +{ + const __be32 *prop; + + if (addrc) { + prop = fdt_getprop(blob, parentoffset, "#address-cells", NULL); + if (prop) + *addrc = be32_to_cpup(prop); + else + *addrc = dt_root_addr_cells; + } + + if (sizec) { + prop = fdt_getprop(blob, parentoffset, "#size-cells", NULL); + if (prop) + *sizec = be32_to_cpup(prop); + else + *sizec = dt_root_size_cells; + } +} + +static u64 __init fdt_bus_default_map(__be32 *addr, const __be32 *range, + int na, int ns, int pna) +{ + u64 cp, s, da; + + cp = of_read_number(range, na); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr, na); + + pr_debug("FDT: default map, cp=%llx, s=%llx, da=%llx\n", + cp, s, da); + + if (da < cp || da >= (cp + s)) + return OF_BAD_ADDR; + return da - cp; +} + +static int __init fdt_bus_default_translate(__be32 *addr, u64 offset, int na) +{ + u64 a = of_read_number(addr, na); + memset(addr, 0, na * 4); + a += offset; + if (na > 1) + addr[na - 2] = cpu_to_fdt32(a >> 32); + addr[na - 1] = cpu_to_fdt32(a & 0xffffffffu); + + return 0; +} + +/* Array of bus specific translators */ +static const struct of_bus of_busses[] __initconst = { + /* Default */ + { + .count_cells = fdt_bus_default_count_cells, + .map = fdt_bus_default_map, + .translate = fdt_bus_default_translate, + }, +}; + +static int __init fdt_translate_one(const void *blob, int parent, + const struct of_bus *bus, + const struct of_bus *pbus, __be32 *addr, + int na, int ns, int pna, const char *rprop) +{ + const __be32 *ranges; + int rlen; + int rone; + u64 offset = OF_BAD_ADDR; + + ranges = fdt_getprop(blob, parent, rprop, &rlen); + if (!ranges) + return 1; + if (rlen == 0) { + offset = of_read_number(addr, na); + memset(addr, 0, pna * 4); + pr_debug("FDT: empty ranges, 1:1 translation\n"); + goto finish; + } + + pr_debug("FDT: walking ranges...\n"); + + /* Now walk through the ranges */ + rlen /= 4; + rone = na + pna + ns; + for (; rlen >= rone; rlen -= rone, ranges += rone) { + offset = bus->map(addr, ranges, na, ns, pna); + if (offset != OF_BAD_ADDR) + break; + } + if (offset == OF_BAD_ADDR) { + pr_debug("FDT: not found !\n"); + return 1; + } + memcpy(addr, ranges + na, 4 * pna); + + finish: + of_dump_addr("FDT: parent translation for:", addr, pna); + pr_debug("FDT: with offset: %llx\n", offset); + + /* Translate it into parent bus space */ + return pbus->translate(addr, offset, pna); +} + +/* + * Translate an address from the device-tree into a CPU physical address, + * this walks up the tree and applies the various bus mappings on the + * way. + * + * Note: We consider that crossing any level with #size-cells == 0 to mean + * that translation is impossible (that is we are not dealing with a value + * that can be mapped to a cpu physical address). This is not really specified + * that way, but this is traditionally the way IBM at least do things + */ +u64 __init fdt_translate_address(const void *blob, int node_offset) +{ + int parent, len; + const struct of_bus *bus, *pbus; + const __be32 *reg; + __be32 addr[OF_MAX_ADDR_CELLS]; + int na, ns, pna, pns; + u64 result = OF_BAD_ADDR; + + pr_debug("FDT: ** translation for device %s **\n", + fdt_get_name(blob, node_offset, NULL)); + + reg = fdt_getprop(blob, node_offset, "reg", &len); + if (!reg) { + pr_err("FDT: warning: device tree node '%s' has no address.\n", + fdt_get_name(blob, node_offset, NULL)); + goto bail; + } + + /* Get parent & match bus type */ + parent = fdt_parent_offset(blob, node_offset); + if (parent < 0) + goto bail; + bus = &of_busses[0]; + + /* Cound address cells & copy address locally */ + bus->count_cells(blob, parent, &na, &ns); + if (!OF_CHECK_COUNTS(na, ns)) { + pr_err("FDT: Bad cell count for %s\n", + fdt_get_name(blob, node_offset, NULL)); + goto bail; + } + memcpy(addr, reg, na * 4); + + pr_debug("FDT: bus (na=%d, ns=%d) on %s\n", + na, ns, fdt_get_name(blob, parent, NULL)); + of_dump_addr("OF: translating address:", addr, na); + + /* Translate */ + for (;;) { + /* Switch to parent bus */ + node_offset = parent; + parent = fdt_parent_offset(blob, node_offset); + + /* If root, we have finished */ + if (parent < 0) { + pr_debug("FDT: reached root node\n"); + result = of_read_number(addr, na); + break; + } + + /* Get new parent bus and counts */ + pbus = &of_busses[0]; + pbus->count_cells(blob, parent, &pna, &pns); + if (!OF_CHECK_COUNTS(pna, pns)) { + pr_err("FDT: Bad cell count for %s\n", + fdt_get_name(blob, node_offset, NULL)); + break; + } + + pr_debug("FDT: parent bus (na=%d, ns=%d) on %s\n", + pna, pns, fdt_get_name(blob, parent, NULL)); + + /* Apply bus translation */ + if (fdt_translate_one(blob, node_offset, bus, pbus, + addr, na, ns, pna, "ranges")) + break; + + /* Complete the move up one level */ + na = pna; + ns = pns; + bus = pbus; + + of_dump_addr("FDT: one level translation:", addr, na); + } + bail: + return result; +} diff --git a/drivers/of/irq.c b/drivers/of/irq.c new file mode 100644 index 000000000..1a7980692 --- /dev/null +++ b/drivers/of/irq.c @@ -0,0 +1,579 @@ +/* + * Derived from arch/i386/kernel/irq.c + * Copyright (C) 1992 Linus Torvalds + * Adapted from arch/i386 by Gary Thomas + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * Updated and modified by Cort Dougan <cort@fsmlabs.com> + * Copyright (C) 1996-2001 Cort Dougan + * Adapted for Power Macintosh by Paul Mackerras + * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This file contains the code used to make IRQ descriptions in the + * device tree to actual irq numbers on an interrupt controller + * driver. + */ + +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/string.h> +#include <linux/slab.h> + +/** + * irq_of_parse_and_map - Parse and map an interrupt into linux virq space + * @dev: Device node of the device whose interrupt is to be mapped + * @index: Index of the interrupt to map + * + * This function is a wrapper that chains of_irq_parse_one() and + * irq_create_of_mapping() to make things easier to callers + */ +unsigned int irq_of_parse_and_map(struct device_node *dev, int index) +{ + struct of_phandle_args oirq; + + if (of_irq_parse_one(dev, index, &oirq)) + return 0; + + return irq_create_of_mapping(&oirq); +} +EXPORT_SYMBOL_GPL(irq_of_parse_and_map); + +/** + * of_irq_find_parent - Given a device node, find its interrupt parent node + * @child: pointer to device node + * + * Returns a pointer to the interrupt parent node, or NULL if the interrupt + * parent could not be determined. + */ +struct device_node *of_irq_find_parent(struct device_node *child) +{ + struct device_node *p; + const __be32 *parp; + + if (!of_node_get(child)) + return NULL; + + do { + parp = of_get_property(child, "interrupt-parent", NULL); + if (parp == NULL) + p = of_get_parent(child); + else { + if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) + p = of_node_get(of_irq_dflt_pic); + else + p = of_find_node_by_phandle(be32_to_cpup(parp)); + } + of_node_put(child); + child = p; + } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL); + + return p; +} + +/** + * of_irq_parse_raw - Low level interrupt tree parsing + * @parent: the device interrupt parent + * @addr: address specifier (start of "reg" property of the device) in be32 format + * @out_irq: structure of_irq updated by this function + * + * Returns 0 on success and a negative number on error + * + * This function is a low-level interrupt tree walking function. It + * can be used to do a partial walk with synthetized reg and interrupts + * properties, for example when resolving PCI interrupts when no device + * node exist for the parent. It takes an interrupt specifier structure as + * input, walks the tree looking for any interrupt-map properties, translates + * the specifier for each map, and then returns the translated map. + */ +int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) +{ + struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; + __be32 initial_match_array[MAX_PHANDLE_ARGS]; + const __be32 *match_array = initial_match_array; + const __be32 *tmp, *imap, *imask, dummy_imask[] = { [0 ... MAX_PHANDLE_ARGS] = ~0 }; + u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; + int imaplen, match, i; + +#ifdef DEBUG + of_print_phandle_args("of_irq_parse_raw: ", out_irq); +#endif + + ipar = of_node_get(out_irq->np); + + /* First get the #interrupt-cells property of the current cursor + * that tells us how to interpret the passed-in intspec. If there + * is none, we are nice and just walk up the tree + */ + do { + tmp = of_get_property(ipar, "#interrupt-cells", NULL); + if (tmp != NULL) { + intsize = be32_to_cpu(*tmp); + break; + } + tnode = ipar; + ipar = of_irq_find_parent(ipar); + of_node_put(tnode); + } while (ipar); + if (ipar == NULL) { + pr_debug(" -> no parent found !\n"); + goto fail; + } + + pr_debug("of_irq_parse_raw: ipar=%s, size=%d\n", of_node_full_name(ipar), intsize); + + if (out_irq->args_count != intsize) + return -EINVAL; + + /* Look for this #address-cells. We have to implement the old linux + * trick of looking for the parent here as some device-trees rely on it + */ + old = of_node_get(ipar); + do { + tmp = of_get_property(old, "#address-cells", NULL); + tnode = of_get_parent(old); + of_node_put(old); + old = tnode; + } while (old && tmp == NULL); + of_node_put(old); + old = NULL; + addrsize = (tmp == NULL) ? 2 : be32_to_cpu(*tmp); + + pr_debug(" -> addrsize=%d\n", addrsize); + + /* Range check so that the temporary buffer doesn't overflow */ + if (WARN_ON(addrsize + intsize > MAX_PHANDLE_ARGS)) + goto fail; + + /* Precalculate the match array - this simplifies match loop */ + for (i = 0; i < addrsize; i++) + initial_match_array[i] = addr ? addr[i] : 0; + for (i = 0; i < intsize; i++) + initial_match_array[addrsize + i] = cpu_to_be32(out_irq->args[i]); + + /* Now start the actual "proper" walk of the interrupt tree */ + while (ipar != NULL) { + /* Now check if cursor is an interrupt-controller and if it is + * then we are done + */ + if (of_get_property(ipar, "interrupt-controller", NULL) != + NULL) { + pr_debug(" -> got it !\n"); + return 0; + } + + /* + * interrupt-map parsing does not work without a reg + * property when #address-cells != 0 + */ + if (addrsize && !addr) { + pr_debug(" -> no reg passed in when needed !\n"); + goto fail; + } + + /* Now look for an interrupt-map */ + imap = of_get_property(ipar, "interrupt-map", &imaplen); + /* No interrupt map, check for an interrupt parent */ + if (imap == NULL) { + pr_debug(" -> no map, getting parent\n"); + newpar = of_irq_find_parent(ipar); + goto skiplevel; + } + imaplen /= sizeof(u32); + + /* Look for a mask */ + imask = of_get_property(ipar, "interrupt-map-mask", NULL); + if (!imask) + imask = dummy_imask; + + /* Parse interrupt-map */ + match = 0; + while (imaplen > (addrsize + intsize + 1) && !match) { + /* Compare specifiers */ + match = 1; + for (i = 0; i < (addrsize + intsize); i++, imaplen--) + match &= !((match_array[i] ^ *imap++) & imask[i]); + + pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen); + + /* Get the interrupt parent */ + if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) + newpar = of_node_get(of_irq_dflt_pic); + else + newpar = of_find_node_by_phandle(be32_to_cpup(imap)); + imap++; + --imaplen; + + /* Check if not found */ + if (newpar == NULL) { + pr_debug(" -> imap parent not found !\n"); + goto fail; + } + + if (!of_device_is_available(newpar)) + match = 0; + + /* Get #interrupt-cells and #address-cells of new + * parent + */ + tmp = of_get_property(newpar, "#interrupt-cells", NULL); + if (tmp == NULL) { + pr_debug(" -> parent lacks #interrupt-cells!\n"); + goto fail; + } + newintsize = be32_to_cpu(*tmp); + tmp = of_get_property(newpar, "#address-cells", NULL); + newaddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp); + + pr_debug(" -> newintsize=%d, newaddrsize=%d\n", + newintsize, newaddrsize); + + /* Check for malformed properties */ + if (WARN_ON(newaddrsize + newintsize > MAX_PHANDLE_ARGS)) + goto fail; + if (imaplen < (newaddrsize + newintsize)) + goto fail; + + imap += newaddrsize + newintsize; + imaplen -= newaddrsize + newintsize; + + pr_debug(" -> imaplen=%d\n", imaplen); + } + if (!match) + goto fail; + + /* + * Successfully parsed an interrrupt-map translation; copy new + * interrupt specifier into the out_irq structure + */ + out_irq->np = newpar; + + match_array = imap - newaddrsize - newintsize; + for (i = 0; i < newintsize; i++) + out_irq->args[i] = be32_to_cpup(imap - newintsize + i); + out_irq->args_count = intsize = newintsize; + addrsize = newaddrsize; + + skiplevel: + /* Iterate again with new parent */ + pr_debug(" -> new parent: %s\n", of_node_full_name(newpar)); + of_node_put(ipar); + ipar = newpar; + newpar = NULL; + } + fail: + of_node_put(ipar); + of_node_put(newpar); + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(of_irq_parse_raw); + +/** + * of_irq_parse_one - Resolve an interrupt for a device + * @device: the device whose interrupt is to be resolved + * @index: index of the interrupt to resolve + * @out_irq: structure of_irq filled by this function + * + * This function resolves an interrupt for a node by walking the interrupt tree, + * finding which interrupt controller node it is attached to, and returning the + * interrupt specifier that can be used to retrieve a Linux IRQ number. + */ +int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_args *out_irq) +{ + struct device_node *p; + const __be32 *intspec, *tmp, *addr; + u32 intsize, intlen; + int i, res; + + pr_debug("of_irq_parse_one: dev=%s, index=%d\n", of_node_full_name(device), index); + + /* OldWorld mac stuff is "special", handle out of line */ + if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC) + return of_irq_parse_oldworld(device, index, out_irq); + + /* Get the reg property (if any) */ + addr = of_get_property(device, "reg", NULL); + + /* Try the new-style interrupts-extended first */ + res = of_parse_phandle_with_args(device, "interrupts-extended", + "#interrupt-cells", index, out_irq); + if (!res) + return of_irq_parse_raw(addr, out_irq); + + /* Get the interrupts property */ + intspec = of_get_property(device, "interrupts", &intlen); + if (intspec == NULL) + return -EINVAL; + + intlen /= sizeof(*intspec); + + pr_debug(" intspec=%d intlen=%d\n", be32_to_cpup(intspec), intlen); + + /* Look for the interrupt parent. */ + p = of_irq_find_parent(device); + if (p == NULL) + return -EINVAL; + + /* Get size of interrupt specifier */ + tmp = of_get_property(p, "#interrupt-cells", NULL); + if (tmp == NULL) { + res = -EINVAL; + goto out; + } + intsize = be32_to_cpu(*tmp); + + pr_debug(" intsize=%d intlen=%d\n", intsize, intlen); + + /* Check index */ + if ((index + 1) * intsize > intlen) { + res = -EINVAL; + goto out; + } + + /* Copy intspec into irq structure */ + intspec += index * intsize; + out_irq->np = p; + out_irq->args_count = intsize; + for (i = 0; i < intsize; i++) + out_irq->args[i] = be32_to_cpup(intspec++); + + /* Check if there are any interrupt-map translations to process */ + res = of_irq_parse_raw(addr, out_irq); + out: + of_node_put(p); + return res; +} +EXPORT_SYMBOL_GPL(of_irq_parse_one); + +/** + * of_irq_to_resource - Decode a node's IRQ and return it as a resource + * @dev: pointer to device tree node + * @index: zero-based index of the irq + * @r: pointer to resource structure to return result into. + */ +int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) +{ + int irq = irq_of_parse_and_map(dev, index); + + /* Only dereference the resource if both the + * resource and the irq are valid. */ + if (r && irq) { + const char *name = NULL; + + memset(r, 0, sizeof(*r)); + /* + * Get optional "interrupt-names" property to add a name + * to the resource. + */ + of_property_read_string_index(dev, "interrupt-names", index, + &name); + + r->start = r->end = irq; + r->flags = IORESOURCE_IRQ | irqd_get_trigger_type(irq_get_irq_data(irq)); + r->name = name ? name : of_node_full_name(dev); + } + + return irq; +} +EXPORT_SYMBOL_GPL(of_irq_to_resource); + +/** + * of_irq_get - Decode a node's IRQ and return it as a Linux irq number + * @dev: pointer to device tree node + * @index: zero-based index of the irq + * + * Returns Linux irq number on success, or -EPROBE_DEFER if the irq domain + * is not yet created. + * + */ +int of_irq_get(struct device_node *dev, int index) +{ + int rc; + struct of_phandle_args oirq; + struct irq_domain *domain; + + rc = of_irq_parse_one(dev, index, &oirq); + if (rc) + return rc; + + domain = irq_find_host(oirq.np); + if (!domain) + return -EPROBE_DEFER; + + return irq_create_of_mapping(&oirq); +} +EXPORT_SYMBOL_GPL(of_irq_get); + +/** + * of_irq_get_byname - Decode a node's IRQ and return it as a Linux irq number + * @dev: pointer to device tree node + * @name: irq name + * + * Returns Linux irq number on success, or -EPROBE_DEFER if the irq domain + * is not yet created, or error code in case of any other failure. + */ +int of_irq_get_byname(struct device_node *dev, const char *name) +{ + int index; + + if (unlikely(!name)) + return -EINVAL; + + index = of_property_match_string(dev, "interrupt-names", name); + if (index < 0) + return index; + + return of_irq_get(dev, index); +} + +/** + * of_irq_count - Count the number of IRQs a node uses + * @dev: pointer to device tree node + */ +int of_irq_count(struct device_node *dev) +{ + struct of_phandle_args irq; + int nr = 0; + + while (of_irq_parse_one(dev, nr, &irq) == 0) + nr++; + + return nr; +} + +/** + * of_irq_to_resource_table - Fill in resource table with node's IRQ info + * @dev: pointer to device tree node + * @res: array of resources to fill in + * @nr_irqs: the number of IRQs (and upper bound for num of @res elements) + * + * Returns the size of the filled in table (up to @nr_irqs). + */ +int of_irq_to_resource_table(struct device_node *dev, struct resource *res, + int nr_irqs) +{ + int i; + + for (i = 0; i < nr_irqs; i++, res++) + if (!of_irq_to_resource(dev, i, res)) + break; + + return i; +} +EXPORT_SYMBOL_GPL(of_irq_to_resource_table); + +struct intc_desc { + struct list_head list; + struct device_node *dev; + struct device_node *interrupt_parent; +}; + +/** + * of_irq_init - Scan and init matching interrupt controllers in DT + * @matches: 0 terminated array of nodes to match and init function to call + * + * This function scans the device tree for matching interrupt controller nodes, + * and calls their initialization functions in order with parents first. + */ +void __init of_irq_init(const struct of_device_id *matches) +{ + struct device_node *np, *parent = NULL; + struct intc_desc *desc, *temp_desc; + struct list_head intc_desc_list, intc_parent_list; + + INIT_LIST_HEAD(&intc_desc_list); + INIT_LIST_HEAD(&intc_parent_list); + + for_each_matching_node(np, matches) { + if (!of_find_property(np, "interrupt-controller", NULL) || + !of_device_is_available(np)) + continue; + /* + * Here, we allocate and populate an intc_desc with the node + * pointer, interrupt-parent device_node etc. + */ + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (WARN_ON(!desc)) + goto err; + + desc->dev = np; + desc->interrupt_parent = of_irq_find_parent(np); + if (desc->interrupt_parent == np) + desc->interrupt_parent = NULL; + list_add_tail(&desc->list, &intc_desc_list); + } + + /* + * The root irq controller is the one without an interrupt-parent. + * That one goes first, followed by the controllers that reference it, + * followed by the ones that reference the 2nd level controllers, etc. + */ + while (!list_empty(&intc_desc_list)) { + /* + * Process all controllers with the current 'parent'. + * First pass will be looking for NULL as the parent. + * The assumption is that NULL parent means a root controller. + */ + list_for_each_entry_safe(desc, temp_desc, &intc_desc_list, list) { + const struct of_device_id *match; + int ret; + of_irq_init_cb_t irq_init_cb; + + if (desc->interrupt_parent != parent) + continue; + + list_del(&desc->list); + match = of_match_node(matches, desc->dev); + if (WARN(!match->data, + "of_irq_init: no init function for %s\n", + match->compatible)) { + kfree(desc); + continue; + } + + pr_debug("of_irq_init: init %s @ %p, parent %p\n", + match->compatible, + desc->dev, desc->interrupt_parent); + irq_init_cb = (of_irq_init_cb_t)match->data; + ret = irq_init_cb(desc->dev, desc->interrupt_parent); + if (ret) { + kfree(desc); + continue; + } + + /* + * This one is now set up; add it to the parent list so + * its children can get processed in a subsequent pass. + */ + list_add_tail(&desc->list, &intc_parent_list); + } + + /* Get the next pending parent that might have children */ + desc = list_first_entry_or_null(&intc_parent_list, + typeof(*desc), list); + if (!desc) { + pr_err("of_irq_init: children remain, but no parents\n"); + break; + } + list_del(&desc->list); + parent = desc->dev; + kfree(desc); + } + + list_for_each_entry_safe(desc, temp_desc, &intc_parent_list, list) { + list_del(&desc->list); + kfree(desc); + } +err: + list_for_each_entry_safe(desc, temp_desc, &intc_desc_list, list) { + list_del(&desc->list); + kfree(desc); + } +} diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c new file mode 100644 index 000000000..0c064485d --- /dev/null +++ b/drivers/of/of_mdio.c @@ -0,0 +1,323 @@ +/* + * OF helpers for the MDIO (Ethernet PHY) API + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + * + * This file is released under the GPLv2 + * + * This file provides helper functions for extracting PHY device information + * out of the OpenFirmware device tree and using it to populate an mii_bus. + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/netdevice.h> +#include <linux/err.h> +#include <linux/phy.h> +#include <linux/phy_fixed.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_mdio.h> +#include <linux/module.h> + +MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); +MODULE_LICENSE("GPL"); + +/* Extract the clause 22 phy ID from the compatible string of the form + * ethernet-phy-idAAAA.BBBB */ +static int of_get_phy_id(struct device_node *device, u32 *phy_id) +{ + struct property *prop; + const char *cp; + unsigned int upper, lower; + + of_property_for_each_string(device, "compatible", prop, cp) { + if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) { + *phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF); + return 0; + } + } + return -EINVAL; +} + +static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *child, + u32 addr) +{ + struct phy_device *phy; + bool is_c45; + int rc; + u32 phy_id; + + is_c45 = of_device_is_compatible(child, + "ethernet-phy-ieee802.3-c45"); + + if (!is_c45 && !of_get_phy_id(child, &phy_id)) + phy = phy_device_create(mdio, addr, phy_id, 0, NULL); + else + phy = get_phy_device(mdio, addr, is_c45); + if (!phy || IS_ERR(phy)) + return 1; + + rc = irq_of_parse_and_map(child, 0); + if (rc > 0) { + phy->irq = rc; + if (mdio->irq) + mdio->irq[addr] = rc; + } else { + if (mdio->irq) + phy->irq = mdio->irq[addr]; + } + + /* Associate the OF node with the device structure so it + * can be looked up later */ + of_node_get(child); + phy->dev.of_node = child; + + /* All data is now stored in the phy struct; + * register it */ + rc = phy_device_register(phy); + if (rc) { + phy_device_free(phy); + of_node_put(child); + return 1; + } + + dev_dbg(&mdio->dev, "registered phy %s at address %i\n", + child->name, addr); + + return 0; +} + +int of_mdio_parse_addr(struct device *dev, const struct device_node *np) +{ + u32 addr; + int ret; + + ret = of_property_read_u32(np, "reg", &addr); + if (ret < 0) { + dev_err(dev, "%s has invalid PHY address\n", np->full_name); + return ret; + } + + /* A PHY must have a reg property in the range [0-31] */ + if (addr >= PHY_MAX_ADDR) { + dev_err(dev, "%s PHY address %i is too large\n", + np->full_name, addr); + return -EINVAL; + } + + return addr; +} +EXPORT_SYMBOL(of_mdio_parse_addr); + +/** + * of_mdiobus_register - Register mii_bus and create PHYs from the device tree + * @mdio: pointer to mii_bus structure + * @np: pointer to device_node of MDIO bus. + * + * This function registers the mii_bus structure and registers a phy_device + * for each child node of @np. + */ +int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) +{ + struct device_node *child; + const __be32 *paddr; + bool scanphys = false; + int addr, rc, i; + + /* Mask out all PHYs from auto probing. Instead the PHYs listed in + * the device tree are populated after the bus has been registered */ + mdio->phy_mask = ~0; + + /* Clear all the IRQ properties */ + if (mdio->irq) + for (i=0; i<PHY_MAX_ADDR; i++) + mdio->irq[i] = PHY_POLL; + + mdio->dev.of_node = np; + + /* Register the MDIO bus */ + rc = mdiobus_register(mdio); + if (rc) + return rc; + + /* Loop over the child nodes and register a phy_device for each one */ + for_each_available_child_of_node(np, child) { + addr = of_mdio_parse_addr(&mdio->dev, child); + if (addr < 0) { + scanphys = true; + continue; + } + + rc = of_mdiobus_register_phy(mdio, child, addr); + if (rc) + continue; + } + + if (!scanphys) + return 0; + + /* auto scan for PHYs with empty reg property */ + for_each_available_child_of_node(np, child) { + /* Skip PHYs with reg property set */ + paddr = of_get_property(child, "reg", NULL); + if (paddr) + continue; + + for (addr = 0; addr < PHY_MAX_ADDR; addr++) { + /* skip already registered PHYs */ + if (mdio->phy_map[addr]) + continue; + + /* be noisy to encourage people to set reg property */ + dev_info(&mdio->dev, "scan phy %s at address %i\n", + child->name, addr); + + rc = of_mdiobus_register_phy(mdio, child, addr); + if (rc) + continue; + } + } + + return 0; +} +EXPORT_SYMBOL(of_mdiobus_register); + +/* Helper function for of_phy_find_device */ +static int of_phy_match(struct device *dev, void *phy_np) +{ + return dev->of_node == phy_np; +} + +/** + * of_phy_find_device - Give a PHY node, find the phy_device + * @phy_np: Pointer to the phy's device tree node + * + * Returns a pointer to the phy_device. + */ +struct phy_device *of_phy_find_device(struct device_node *phy_np) +{ + struct device *d; + if (!phy_np) + return NULL; + + d = bus_find_device(&mdio_bus_type, NULL, phy_np, of_phy_match); + return d ? to_phy_device(d) : NULL; +} +EXPORT_SYMBOL(of_phy_find_device); + +/** + * of_phy_connect - Connect to the phy described in the device tree + * @dev: pointer to net_device claiming the phy + * @phy_np: Pointer to device tree node for the PHY + * @hndlr: Link state callback for the network device + * @iface: PHY data interface type + * + * Returns a pointer to the phy_device if successful. NULL otherwise + */ +struct phy_device *of_phy_connect(struct net_device *dev, + struct device_node *phy_np, + void (*hndlr)(struct net_device *), u32 flags, + phy_interface_t iface) +{ + struct phy_device *phy = of_phy_find_device(phy_np); + + if (!phy) + return NULL; + + phy->dev_flags = flags; + + return phy_connect_direct(dev, phy, hndlr, iface) ? NULL : phy; +} +EXPORT_SYMBOL(of_phy_connect); + +/** + * of_phy_attach - Attach to a PHY without starting the state machine + * @dev: pointer to net_device claiming the phy + * @phy_np: Node pointer for the PHY + * @flags: flags to pass to the PHY + * @iface: PHY data interface type + */ +struct phy_device *of_phy_attach(struct net_device *dev, + struct device_node *phy_np, u32 flags, + phy_interface_t iface) +{ + struct phy_device *phy = of_phy_find_device(phy_np); + + if (!phy) + return NULL; + + return phy_attach_direct(dev, phy, flags, iface) ? NULL : phy; +} +EXPORT_SYMBOL(of_phy_attach); + +#if defined(CONFIG_FIXED_PHY) +/* + * of_phy_is_fixed_link() and of_phy_register_fixed_link() must + * support two DT bindings: + * - the old DT binding, where 'fixed-link' was a property with 5 + * cells encoding various informations about the fixed PHY + * - the new DT binding, where 'fixed-link' is a sub-node of the + * Ethernet device. + */ +bool of_phy_is_fixed_link(struct device_node *np) +{ + struct device_node *dn; + int len; + + /* New binding */ + dn = of_get_child_by_name(np, "fixed-link"); + if (dn) { + of_node_put(dn); + return true; + } + + /* Old binding */ + if (of_get_property(np, "fixed-link", &len) && + len == (5 * sizeof(__be32))) + return true; + + return false; +} +EXPORT_SYMBOL(of_phy_is_fixed_link); + +int of_phy_register_fixed_link(struct device_node *np) +{ + struct fixed_phy_status status = {}; + struct device_node *fixed_link_node; + const __be32 *fixed_link_prop; + int len; + struct phy_device *phy; + + /* New binding */ + fixed_link_node = of_get_child_by_name(np, "fixed-link"); + if (fixed_link_node) { + status.link = 1; + status.duplex = of_property_read_bool(fixed_link_node, + "full-duplex"); + if (of_property_read_u32(fixed_link_node, "speed", &status.speed)) + return -EINVAL; + status.pause = of_property_read_bool(fixed_link_node, "pause"); + status.asym_pause = of_property_read_bool(fixed_link_node, + "asym-pause"); + of_node_put(fixed_link_node); + phy = fixed_phy_register(PHY_POLL, &status, np); + return IS_ERR(phy) ? PTR_ERR(phy) : 0; + } + + /* Old binding */ + fixed_link_prop = of_get_property(np, "fixed-link", &len); + if (fixed_link_prop && len == (5 * sizeof(__be32))) { + status.link = 1; + status.duplex = be32_to_cpu(fixed_link_prop[1]); + status.speed = be32_to_cpu(fixed_link_prop[2]); + status.pause = be32_to_cpu(fixed_link_prop[3]); + status.asym_pause = be32_to_cpu(fixed_link_prop[4]); + phy = fixed_phy_register(PHY_POLL, &status, np); + return IS_ERR(phy) ? PTR_ERR(phy) : 0; + } + + return -ENODEV; +} +EXPORT_SYMBOL(of_phy_register_fixed_link); +#endif diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c new file mode 100644 index 000000000..b7361ed70 --- /dev/null +++ b/drivers/of/of_mtd.c @@ -0,0 +1,119 @@ +/* + * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * OF helpers for mtd. + * + * This file is released under the GPLv2 + * + */ +#include <linux/kernel.h> +#include <linux/of_mtd.h> +#include <linux/mtd/nand.h> +#include <linux/export.h> + +/** + * It maps 'enum nand_ecc_modes_t' found in include/linux/mtd/nand.h + * into the device tree binding of 'nand-ecc', so that MTD + * device driver can get nand ecc from device tree. + */ +static const char *nand_ecc_modes[] = { + [NAND_ECC_NONE] = "none", + [NAND_ECC_SOFT] = "soft", + [NAND_ECC_HW] = "hw", + [NAND_ECC_HW_SYNDROME] = "hw_syndrome", + [NAND_ECC_HW_OOB_FIRST] = "hw_oob_first", + [NAND_ECC_SOFT_BCH] = "soft_bch", +}; + +/** + * of_get_nand_ecc_mode - Get nand ecc mode for given device_node + * @np: Pointer to the given device_node + * + * The function gets ecc mode string from property 'nand-ecc-mode', + * and return its index in nand_ecc_modes table, or errno in error case. + */ +int of_get_nand_ecc_mode(struct device_node *np) +{ + const char *pm; + int err, i; + + err = of_property_read_string(np, "nand-ecc-mode", &pm); + if (err < 0) + return err; + + for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++) + if (!strcasecmp(pm, nand_ecc_modes[i])) + return i; + + return -ENODEV; +} +EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode); + +/** + * of_get_nand_ecc_step_size - Get ECC step size associated to + * the required ECC strength (see below). + * @np: Pointer to the given device_node + * + * return the ECC step size, or errno in error case. + */ +int of_get_nand_ecc_step_size(struct device_node *np) +{ + int ret; + u32 val; + + ret = of_property_read_u32(np, "nand-ecc-step-size", &val); + return ret ? ret : val; +} +EXPORT_SYMBOL_GPL(of_get_nand_ecc_step_size); + +/** + * of_get_nand_ecc_strength - Get required ECC strength over the + * correspnding step size as defined by 'nand-ecc-size' + * @np: Pointer to the given device_node + * + * return the ECC strength, or errno in error case. + */ +int of_get_nand_ecc_strength(struct device_node *np) +{ + int ret; + u32 val; + + ret = of_property_read_u32(np, "nand-ecc-strength", &val); + return ret ? ret : val; +} +EXPORT_SYMBOL_GPL(of_get_nand_ecc_strength); + +/** + * of_get_nand_bus_width - Get nand bus witdh for given device_node + * @np: Pointer to the given device_node + * + * return bus width option, or errno in error case. + */ +int of_get_nand_bus_width(struct device_node *np) +{ + u32 val; + + if (of_property_read_u32(np, "nand-bus-width", &val)) + return 8; + + switch(val) { + case 8: + case 16: + return val; + default: + return -EIO; + } +} +EXPORT_SYMBOL_GPL(of_get_nand_bus_width); + +/** + * of_get_nand_on_flash_bbt - Get nand on flash bbt for given device_node + * @np: Pointer to the given device_node + * + * return true if present false other wise + */ +bool of_get_nand_on_flash_bbt(struct device_node *np) +{ + return of_property_read_bool(np, "nand-on-flash-bbt"); +} +EXPORT_SYMBOL_GPL(of_get_nand_on_flash_bbt); diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c new file mode 100644 index 000000000..d820f3edd --- /dev/null +++ b/drivers/of/of_net.c @@ -0,0 +1,82 @@ +/* + * OF helpers for network devices. + * + * This file is released under the GPLv2 + * + * Initially copied out of arch/powerpc/kernel/prom_parse.c + */ +#include <linux/etherdevice.h> +#include <linux/kernel.h> +#include <linux/of_net.h> +#include <linux/phy.h> +#include <linux/export.h> + +/** + * of_get_phy_mode - Get phy mode for given device_node + * @np: Pointer to the given device_node + * + * The function gets phy interface string from property 'phy-mode' or + * 'phy-connection-type', and return its index in phy_modes table, or errno in + * error case. + */ +int of_get_phy_mode(struct device_node *np) +{ + const char *pm; + int err, i; + + err = of_property_read_string(np, "phy-mode", &pm); + if (err < 0) + err = of_property_read_string(np, "phy-connection-type", &pm); + if (err < 0) + return err; + + for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++) + if (!strcasecmp(pm, phy_modes(i))) + return i; + + return -ENODEV; +} +EXPORT_SYMBOL_GPL(of_get_phy_mode); + +static const void *of_get_mac_addr(struct device_node *np, const char *name) +{ + struct property *pp = of_find_property(np, name, NULL); + + if (pp && pp->length == ETH_ALEN && is_valid_ether_addr(pp->value)) + return pp->value; + return NULL; +} + +/** + * Search the device tree for the best MAC address to use. 'mac-address' is + * checked first, because that is supposed to contain to "most recent" MAC + * address. If that isn't set, then 'local-mac-address' is checked next, + * because that is the default address. If that isn't set, then the obsolete + * 'address' is checked, just in case we're using an old device tree. + * + * Note that the 'address' property is supposed to contain a virtual address of + * the register set, but some DTS files have redefined that property to be the + * MAC address. + * + * All-zero MAC addresses are rejected, because those could be properties that + * exist in the device tree, but were not set by U-Boot. For example, the + * DTS could define 'mac-address' and 'local-mac-address', with zero MAC + * addresses. Some older U-Boots only initialized 'local-mac-address'. In + * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists + * but is all zeros. +*/ +const void *of_get_mac_address(struct device_node *np) +{ + const void *addr; + + addr = of_get_mac_addr(np, "mac-address"); + if (addr) + return addr; + + addr = of_get_mac_addr(np, "local-mac-address"); + if (addr) + return addr; + + return of_get_mac_addr(np, "address"); +} +EXPORT_SYMBOL(of_get_mac_address); diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c new file mode 100644 index 000000000..5751dc5b6 --- /dev/null +++ b/drivers/of/of_pci.c @@ -0,0 +1,301 @@ +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_pci.h> +#include <linux/slab.h> + +static inline int __of_pci_pci_compare(struct device_node *node, + unsigned int data) +{ + int devfn; + + devfn = of_pci_get_devfn(node); + if (devfn < 0) + return 0; + + return devfn == data; +} + +struct device_node *of_pci_find_child_device(struct device_node *parent, + unsigned int devfn) +{ + struct device_node *node, *node2; + + for_each_child_of_node(parent, node) { + if (__of_pci_pci_compare(node, devfn)) + return node; + /* + * Some OFs create a parent node "multifunc-device" as + * a fake root for all functions of a multi-function + * device we go down them as well. + */ + if (!strcmp(node->name, "multifunc-device")) { + for_each_child_of_node(node, node2) { + if (__of_pci_pci_compare(node2, devfn)) { + of_node_put(node); + return node2; + } + } + } + } + return NULL; +} +EXPORT_SYMBOL_GPL(of_pci_find_child_device); + +/** + * of_pci_get_devfn() - Get device and function numbers for a device node + * @np: device node + * + * Parses a standard 5-cell PCI resource and returns an 8-bit value that can + * be passed to the PCI_SLOT() and PCI_FUNC() macros to extract the device + * and function numbers respectively. On error a negative error code is + * returned. + */ +int of_pci_get_devfn(struct device_node *np) +{ + unsigned int size; + const __be32 *reg; + + reg = of_get_property(np, "reg", &size); + + if (!reg || size < 5 * sizeof(__be32)) + return -EINVAL; + + return (be32_to_cpup(reg) >> 8) & 0xff; +} +EXPORT_SYMBOL_GPL(of_pci_get_devfn); + +/** + * of_pci_parse_bus_range() - parse the bus-range property of a PCI device + * @node: device node + * @res: address to a struct resource to return the bus-range + * + * Returns 0 on success or a negative error-code on failure. + */ +int of_pci_parse_bus_range(struct device_node *node, struct resource *res) +{ + const __be32 *values; + int len; + + values = of_get_property(node, "bus-range", &len); + if (!values || len < sizeof(*values) * 2) + return -EINVAL; + + res->name = node->name; + res->start = be32_to_cpup(values++); + res->end = be32_to_cpup(values); + res->flags = IORESOURCE_BUS; + + return 0; +} +EXPORT_SYMBOL_GPL(of_pci_parse_bus_range); + +/** + * This function will try to obtain the host bridge domain number by + * finding a property called "linux,pci-domain" of the given device node. + * + * @node: device tree node with the domain information + * + * Returns the associated domain number from DT in the range [0-0xffff], or + * a negative value if the required property is not found. + */ +int of_get_pci_domain_nr(struct device_node *node) +{ + const __be32 *value; + int len; + u16 domain; + + value = of_get_property(node, "linux,pci-domain", &len); + if (!value || len < sizeof(*value)) + return -EINVAL; + + domain = (u16)be32_to_cpup(value); + + return domain; +} +EXPORT_SYMBOL_GPL(of_get_pci_domain_nr); + +/** + * of_pci_dma_configure - Setup DMA configuration + * @dev: ptr to pci_dev struct of the PCI device + * + * Function to update PCI devices's DMA configuration using the same + * info from the OF node of host bridge's parent (if any). + */ +void of_pci_dma_configure(struct pci_dev *pci_dev) +{ + struct device *dev = &pci_dev->dev; + struct device *bridge = pci_get_host_bridge_device(pci_dev); + + if (!bridge->parent) + return; + + of_dma_configure(dev, bridge->parent->of_node); + pci_put_host_bridge_device(bridge); +} +EXPORT_SYMBOL_GPL(of_pci_dma_configure); + +#if defined(CONFIG_OF_ADDRESS) +/** + * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT + * @dev: device node of the host bridge having the range property + * @busno: bus number associated with the bridge root bus + * @bus_max: maximum number of buses for this bridge + * @resources: list where the range of resources will be added after DT parsing + * @io_base: pointer to a variable that will contain on return the physical + * address for the start of the I/O range. Can be NULL if the caller doesn't + * expect IO ranges to be present in the device tree. + * + * It is the caller's job to free the @resources list. + * + * This function will parse the "ranges" property of a PCI host bridge device + * node and setup the resource mapping based on its content. It is expected + * that the property conforms with the Power ePAPR document. + * + * It returns zero if the range parsing has been successful or a standard error + * value if it failed. + */ +int of_pci_get_host_bridge_resources(struct device_node *dev, + unsigned char busno, unsigned char bus_max, + struct list_head *resources, resource_size_t *io_base) +{ + struct resource_entry *window; + struct resource *res; + struct resource *bus_range; + struct of_pci_range range; + struct of_pci_range_parser parser; + char range_type[4]; + int err; + + if (io_base) + *io_base = (resource_size_t)OF_BAD_ADDR; + + bus_range = kzalloc(sizeof(*bus_range), GFP_KERNEL); + if (!bus_range) + return -ENOMEM; + + pr_info("PCI host bridge %s ranges:\n", dev->full_name); + + err = of_pci_parse_bus_range(dev, bus_range); + if (err) { + bus_range->start = busno; + bus_range->end = bus_max; + bus_range->flags = IORESOURCE_BUS; + pr_info(" No bus range found for %s, using %pR\n", + dev->full_name, bus_range); + } else { + if (bus_range->end > bus_range->start + bus_max) + bus_range->end = bus_range->start + bus_max; + } + pci_add_resource(resources, bus_range); + + /* Check for ranges property */ + err = of_pci_range_parser_init(&parser, dev); + if (err) + goto parse_failed; + + pr_debug("Parsing ranges property...\n"); + for_each_of_pci_range(&parser, &range) { + /* Read next ranges element */ + if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO) + snprintf(range_type, 4, " IO"); + else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM) + snprintf(range_type, 4, "MEM"); + else + snprintf(range_type, 4, "err"); + pr_info(" %s %#010llx..%#010llx -> %#010llx\n", range_type, + range.cpu_addr, range.cpu_addr + range.size - 1, + range.pci_addr); + + /* + * If we failed translation or got a zero-sized region + * then skip this range + */ + if (range.cpu_addr == OF_BAD_ADDR || range.size == 0) + continue; + + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + if (!res) { + err = -ENOMEM; + goto parse_failed; + } + + err = of_pci_range_to_resource(&range, dev, res); + if (err) + goto conversion_failed; + + if (resource_type(res) == IORESOURCE_IO) { + if (!io_base) { + pr_err("I/O range found for %s. Please provide an io_base pointer to save CPU base address\n", + dev->full_name); + err = -EINVAL; + goto conversion_failed; + } + if (*io_base != (resource_size_t)OF_BAD_ADDR) + pr_warn("More than one I/O resource converted for %s. CPU base address for old range lost!\n", + dev->full_name); + *io_base = range.cpu_addr; + } + + pci_add_resource_offset(resources, res, res->start - range.pci_addr); + } + + return 0; + +conversion_failed: + kfree(res); +parse_failed: + resource_list_for_each_entry(window, resources) + kfree(window->res); + pci_free_resource_list(resources); + return err; +} +EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources); +#endif /* CONFIG_OF_ADDRESS */ + +#ifdef CONFIG_PCI_MSI + +static LIST_HEAD(of_pci_msi_chip_list); +static DEFINE_MUTEX(of_pci_msi_chip_mutex); + +int of_pci_msi_chip_add(struct msi_controller *chip) +{ + if (!of_property_read_bool(chip->of_node, "msi-controller")) + return -EINVAL; + + mutex_lock(&of_pci_msi_chip_mutex); + list_add(&chip->list, &of_pci_msi_chip_list); + mutex_unlock(&of_pci_msi_chip_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(of_pci_msi_chip_add); + +void of_pci_msi_chip_remove(struct msi_controller *chip) +{ + mutex_lock(&of_pci_msi_chip_mutex); + list_del(&chip->list); + mutex_unlock(&of_pci_msi_chip_mutex); +} +EXPORT_SYMBOL_GPL(of_pci_msi_chip_remove); + +struct msi_controller *of_pci_find_msi_chip_by_node(struct device_node *of_node) +{ + struct msi_controller *c; + + mutex_lock(&of_pci_msi_chip_mutex); + list_for_each_entry(c, &of_pci_msi_chip_list, list) { + if (c->of_node == of_node) { + mutex_unlock(&of_pci_msi_chip_mutex); + return c; + } + } + mutex_unlock(&of_pci_msi_chip_mutex); + + return NULL; +} +EXPORT_SYMBOL_GPL(of_pci_find_msi_chip_by_node); + +#endif /* CONFIG_PCI_MSI */ diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c new file mode 100644 index 000000000..1710d9dc7 --- /dev/null +++ b/drivers/of/of_pci_irq.c @@ -0,0 +1,116 @@ +#include <linux/kernel.h> +#include <linux/of_pci.h> +#include <linux/of_irq.h> +#include <linux/export.h> + +/** + * of_irq_parse_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + __be32 laddr[3]; + u8 pin; + int rc; + + /* Check if we have a device node, if yes, fallback to standard + * device tree parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) { + rc = of_irq_parse_one(dn, 0, out_irq); + if (!rc) + return rc; + } + + /* Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + return rc; + /* No pin, exit */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { + ppnode = pci_bus_to_OF_node(pdev->bus); + + /* No node for host bridge ? give up */ + if (ppnode == NULL) + return -EINVAL; + } else { + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + } + + /* Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't + * include the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* We can only get here if we hit a P2P bridge with no node, + * let's do standard swizzling and try again + */ + pin = pci_swizzle_interrupt_pin(pdev, pin); + pdev = ppdev; + } + + out_irq->np = ppnode; + out_irq->args_count = 1; + out_irq->args[0] = pin; + laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); + laddr[1] = laddr[2] = cpu_to_be32(0); + return of_irq_parse_raw(laddr, out_irq); +} +EXPORT_SYMBOL_GPL(of_irq_parse_pci); + +/** + * of_irq_parse_and_map_pci() - Decode a PCI irq from the device tree and map to a virq + * @dev: The pci device needing an irq + * @slot: PCI slot number; passed when used as map_irq callback. Unused + * @pin: PCI irq pin number; passed when used as map_irq callback. Unused + * + * @slot and @pin are unused, but included in the function so that this + * function can be used directly as the map_irq callback to pci_fixup_irqs(). + */ +int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct of_phandle_args oirq; + int ret; + + ret = of_irq_parse_pci(dev, &oirq); + if (ret) { + dev_err(&dev->dev, "of_irq_parse_pci() failed with rc=%d\n", ret); + return 0; /* Proper return code 0 == NO_IRQ */ + } + + return irq_create_of_mapping(&oirq); +} +EXPORT_SYMBOL_GPL(of_irq_parse_and_map_pci); + diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h new file mode 100644 index 000000000..8e882e706 --- /dev/null +++ b/drivers/of/of_private.h @@ -0,0 +1,93 @@ +#ifndef _LINUX_OF_PRIVATE_H +#define _LINUX_OF_PRIVATE_H +/* + * Private symbols used by OF support code + * + * Paul Mackerras August 1996. + * Copyright (C) 1996-2005 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/** + * struct alias_prop - Alias property in 'aliases' node + * @link: List node to link the structure in aliases_lookup list + * @alias: Alias property name + * @np: Pointer to device_node that the alias stands for + * @id: Index value from end of alias name + * @stem: Alias string without the index + * + * The structure represents one alias property of 'aliases' node as + * an entry in aliases_lookup list. + */ +struct alias_prop { + struct list_head link; + const char *alias; + struct device_node *np; + int id; + char stem[0]; +}; + +extern struct mutex of_mutex; +extern struct list_head aliases_lookup; +extern struct kset *of_kset; + + +static inline struct device_node *kobj_to_device_node(struct kobject *kobj) +{ + return container_of(kobj, struct device_node, kobj); +} + +#if defined(CONFIG_OF_DYNAMIC) +extern int of_property_notify(int action, struct device_node *np, + struct property *prop, struct property *old_prop); +extern void of_node_release(struct kobject *kobj); +#else /* CONFIG_OF_DYNAMIC */ +static inline int of_property_notify(int action, struct device_node *np, + struct property *prop, struct property *old_prop) +{ + return 0; +} +#endif /* CONFIG_OF_DYNAMIC */ + +/** + * General utilities for working with live trees. + * + * All functions with two leading underscores operate + * without taking node references, so you either have to + * own the devtree lock or work on detached trees only. + */ +struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags); +__printf(2, 3) struct device_node *__of_node_dup(const struct device_node *np, const char *fmt, ...); + +extern const void *__of_get_property(const struct device_node *np, + const char *name, int *lenp); +extern int __of_add_property(struct device_node *np, struct property *prop); +extern int __of_add_property_sysfs(struct device_node *np, + struct property *prop); +extern int __of_remove_property(struct device_node *np, struct property *prop); +extern void __of_remove_property_sysfs(struct device_node *np, + struct property *prop); +extern int __of_update_property(struct device_node *np, + struct property *newprop, struct property **oldprop); +extern void __of_update_property_sysfs(struct device_node *np, + struct property *newprop, struct property *oldprop); + +extern void __of_attach_node(struct device_node *np); +extern int __of_attach_node_sysfs(struct device_node *np); +extern void __of_detach_node(struct device_node *np); +extern void __of_detach_node_sysfs(struct device_node *np); + +/* iterators for transactions, used for overlays */ +/* forward iterator */ +#define for_each_transaction_entry(_oft, _te) \ + list_for_each_entry(_te, &(_oft)->te_list, node) + +/* reverse iterator */ +#define for_each_transaction_entry_reverse(_oft, _te) \ + list_for_each_entry_reverse(_te, &(_oft)->te_list, node) + +#endif /* _LINUX_OF_PRIVATE_H */ diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c new file mode 100644 index 000000000..726ebe792 --- /dev/null +++ b/drivers/of/of_reserved_mem.c @@ -0,0 +1,293 @@ +/* + * Device tree based initialization code for reserved memory. + * + * Copyright (c) 2013, The Linux Foundation. All Rights Reserved. + * Copyright (c) 2013,2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Author: Marek Szyprowski <m.szyprowski@samsung.com> + * Author: Josh Cartwright <joshc@codeaurora.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License or (at your optional) any later version of the license. + */ + +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> +#include <linux/mm.h> +#include <linux/sizes.h> +#include <linux/of_reserved_mem.h> + +#define MAX_RESERVED_REGIONS 16 +static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS]; +static int reserved_mem_count; + +#if defined(CONFIG_HAVE_MEMBLOCK) +#include <linux/memblock.h> +int __init __weak early_init_dt_alloc_reserved_memory_arch(phys_addr_t size, + phys_addr_t align, phys_addr_t start, phys_addr_t end, bool nomap, + phys_addr_t *res_base) +{ + /* + * We use __memblock_alloc_base() because memblock_alloc_base() + * panic()s on allocation failure. + */ + phys_addr_t base = __memblock_alloc_base(size, align, end); + if (!base) + return -ENOMEM; + + /* + * Check if the allocated region fits in to start..end window + */ + if (base < start) { + memblock_free(base, size); + return -ENOMEM; + } + + *res_base = base; + if (nomap) + return memblock_remove(base, size); + return 0; +} +#else +int __init __weak early_init_dt_alloc_reserved_memory_arch(phys_addr_t size, + phys_addr_t align, phys_addr_t start, phys_addr_t end, bool nomap, + phys_addr_t *res_base) +{ + pr_err("Reserved memory not supported, ignoring region 0x%llx%s\n", + size, nomap ? " (nomap)" : ""); + return -ENOSYS; +} +#endif + +/** + * res_mem_save_node() - save fdt node for second pass initialization + */ +void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname, + phys_addr_t base, phys_addr_t size) +{ + struct reserved_mem *rmem = &reserved_mem[reserved_mem_count]; + + if (reserved_mem_count == ARRAY_SIZE(reserved_mem)) { + pr_err("Reserved memory: not enough space all defined regions.\n"); + return; + } + + rmem->fdt_node = node; + rmem->name = uname; + rmem->base = base; + rmem->size = size; + + reserved_mem_count++; + return; +} + +/** + * res_mem_alloc_size() - allocate reserved memory described by 'size', 'align' + * and 'alloc-ranges' properties + */ +static int __init __reserved_mem_alloc_size(unsigned long node, + const char *uname, phys_addr_t *res_base, phys_addr_t *res_size) +{ + int t_len = (dt_root_addr_cells + dt_root_size_cells) * sizeof(__be32); + phys_addr_t start = 0, end = 0; + phys_addr_t base = 0, align = 0, size; + int len; + const __be32 *prop; + int nomap; + int ret; + + prop = of_get_flat_dt_prop(node, "size", &len); + if (!prop) + return -EINVAL; + + if (len != dt_root_size_cells * sizeof(__be32)) { + pr_err("Reserved memory: invalid size property in '%s' node.\n", + uname); + return -EINVAL; + } + size = dt_mem_next_cell(dt_root_size_cells, &prop); + + nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL; + + prop = of_get_flat_dt_prop(node, "alignment", &len); + if (prop) { + if (len != dt_root_addr_cells * sizeof(__be32)) { + pr_err("Reserved memory: invalid alignment property in '%s' node.\n", + uname); + return -EINVAL; + } + align = dt_mem_next_cell(dt_root_addr_cells, &prop); + } + + prop = of_get_flat_dt_prop(node, "alloc-ranges", &len); + if (prop) { + + if (len % t_len != 0) { + pr_err("Reserved memory: invalid alloc-ranges property in '%s', skipping node.\n", + uname); + return -EINVAL; + } + + base = 0; + + while (len > 0) { + start = dt_mem_next_cell(dt_root_addr_cells, &prop); + end = start + dt_mem_next_cell(dt_root_size_cells, + &prop); + + ret = early_init_dt_alloc_reserved_memory_arch(size, + align, start, end, nomap, &base); + if (ret == 0) { + pr_debug("Reserved memory: allocated memory for '%s' node: base %pa, size %ld MiB\n", + uname, &base, + (unsigned long)size / SZ_1M); + break; + } + len -= t_len; + } + + } else { + ret = early_init_dt_alloc_reserved_memory_arch(size, align, + 0, 0, nomap, &base); + if (ret == 0) + pr_debug("Reserved memory: allocated memory for '%s' node: base %pa, size %ld MiB\n", + uname, &base, (unsigned long)size / SZ_1M); + } + + if (base == 0) { + pr_info("Reserved memory: failed to allocate memory for node '%s'\n", + uname); + return -ENOMEM; + } + + *res_base = base; + *res_size = size; + + return 0; +} + +static const struct of_device_id __rmem_of_table_sentinel + __used __section(__reservedmem_of_table_end); + +/** + * res_mem_init_node() - call region specific reserved memory init code + */ +static int __init __reserved_mem_init_node(struct reserved_mem *rmem) +{ + extern const struct of_device_id __reservedmem_of_table[]; + const struct of_device_id *i; + + for (i = __reservedmem_of_table; i < &__rmem_of_table_sentinel; i++) { + reservedmem_of_init_fn initfn = i->data; + const char *compat = i->compatible; + + if (!of_flat_dt_is_compatible(rmem->fdt_node, compat)) + continue; + + if (initfn(rmem) == 0) { + pr_info("Reserved memory: initialized node %s, compatible id %s\n", + rmem->name, compat); + return 0; + } + } + return -ENOENT; +} + +/** + * fdt_init_reserved_mem - allocate and init all saved reserved memory regions + */ +void __init fdt_init_reserved_mem(void) +{ + int i; + for (i = 0; i < reserved_mem_count; i++) { + struct reserved_mem *rmem = &reserved_mem[i]; + unsigned long node = rmem->fdt_node; + int len; + const __be32 *prop; + int err = 0; + + prop = of_get_flat_dt_prop(node, "phandle", &len); + if (!prop) + prop = of_get_flat_dt_prop(node, "linux,phandle", &len); + if (prop) + rmem->phandle = of_read_number(prop, len/4); + + if (rmem->size == 0) + err = __reserved_mem_alloc_size(node, rmem->name, + &rmem->base, &rmem->size); + if (err == 0) + __reserved_mem_init_node(rmem); + } +} + +static inline struct reserved_mem *__find_rmem(struct device_node *node) +{ + unsigned int i; + + if (!node->phandle) + return NULL; + + for (i = 0; i < reserved_mem_count; i++) + if (reserved_mem[i].phandle == node->phandle) + return &reserved_mem[i]; + return NULL; +} + +/** + * of_reserved_mem_device_init() - assign reserved memory region to given device + * + * This function assign memory region pointed by "memory-region" device tree + * property to the given device. + */ +int of_reserved_mem_device_init(struct device *dev) +{ + struct reserved_mem *rmem; + struct device_node *np; + int ret; + + np = of_parse_phandle(dev->of_node, "memory-region", 0); + if (!np) + return -ENODEV; + + rmem = __find_rmem(np); + of_node_put(np); + + if (!rmem || !rmem->ops || !rmem->ops->device_init) + return -EINVAL; + + ret = rmem->ops->device_init(rmem, dev); + if (ret == 0) + dev_info(dev, "assigned reserved memory node %s\n", rmem->name); + + return ret; +} +EXPORT_SYMBOL_GPL(of_reserved_mem_device_init); + +/** + * of_reserved_mem_device_release() - release reserved memory device structures + * + * This function releases structures allocated for memory region handling for + * the given device. + */ +void of_reserved_mem_device_release(struct device *dev) +{ + struct reserved_mem *rmem; + struct device_node *np; + + np = of_parse_phandle(dev->of_node, "memory-region", 0); + if (!np) + return; + + rmem = __find_rmem(np); + of_node_put(np); + + if (!rmem || !rmem->ops || !rmem->ops->device_release) + return; + + rmem->ops->device_release(rmem, dev); +} +EXPORT_SYMBOL_GPL(of_reserved_mem_device_release); diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c new file mode 100644 index 000000000..dee9270ba --- /dev/null +++ b/drivers/of/overlay.c @@ -0,0 +1,552 @@ +/* + * Functions for working with device tree overlays + * + * Copyright (C) 2012 Pantelis Antoniou <panto@antoniou-consulting.com> + * Copyright (C) 2012 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ +#undef DEBUG +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/idr.h> + +#include "of_private.h" + +/** + * struct of_overlay_info - Holds a single overlay info + * @target: target of the overlay operation + * @overlay: pointer to the overlay contents node + * + * Holds a single overlay state, including all the overlay logs & + * records. + */ +struct of_overlay_info { + struct device_node *target; + struct device_node *overlay; +}; + +/** + * struct of_overlay - Holds a complete overlay transaction + * @node: List on which we are located + * @count: Count of ovinfo structures + * @ovinfo_tab: Overlay info table (count sized) + * @cset: Changeset to be used + * + * Holds a complete overlay transaction + */ +struct of_overlay { + int id; + struct list_head node; + int count; + struct of_overlay_info *ovinfo_tab; + struct of_changeset cset; +}; + +static int of_overlay_apply_one(struct of_overlay *ov, + struct device_node *target, const struct device_node *overlay); + +static int of_overlay_apply_single_property(struct of_overlay *ov, + struct device_node *target, struct property *prop) +{ + struct property *propn, *tprop; + + /* NOTE: Multiple changes of single properties not supported */ + tprop = of_find_property(target, prop->name, NULL); + + /* special properties are not meant to be updated (silent NOP) */ + if (of_prop_cmp(prop->name, "name") == 0 || + of_prop_cmp(prop->name, "phandle") == 0 || + of_prop_cmp(prop->name, "linux,phandle") == 0) + return 0; + + propn = __of_prop_dup(prop, GFP_KERNEL); + if (propn == NULL) + return -ENOMEM; + + /* not found? add */ + if (tprop == NULL) + return of_changeset_add_property(&ov->cset, target, propn); + + /* found? update */ + return of_changeset_update_property(&ov->cset, target, propn); +} + +static int of_overlay_apply_single_device_node(struct of_overlay *ov, + struct device_node *target, struct device_node *child) +{ + const char *cname; + struct device_node *tchild; + int ret = 0; + + cname = kbasename(child->full_name); + if (cname == NULL) + return -ENOMEM; + + /* NOTE: Multiple mods of created nodes not supported */ + tchild = of_get_child_by_name(target, cname); + if (tchild != NULL) { + /* apply overlay recursively */ + ret = of_overlay_apply_one(ov, tchild, child); + of_node_put(tchild); + } else { + /* create empty tree as a target */ + tchild = __of_node_dup(child, "%s/%s", target->full_name, cname); + if (!tchild) + return -ENOMEM; + + /* point to parent */ + tchild->parent = target; + + ret = of_changeset_attach_node(&ov->cset, tchild); + if (ret) + return ret; + + ret = of_overlay_apply_one(ov, tchild, child); + if (ret) + return ret; + } + + return ret; +} + +/* + * Apply a single overlay node recursively. + * + * Note that the in case of an error the target node is left + * in a inconsistent state. Error recovery should be performed + * by using the changeset. + */ +static int of_overlay_apply_one(struct of_overlay *ov, + struct device_node *target, const struct device_node *overlay) +{ + struct device_node *child; + struct property *prop; + int ret; + + for_each_property_of_node(overlay, prop) { + ret = of_overlay_apply_single_property(ov, target, prop); + if (ret) { + pr_err("%s: Failed to apply prop @%s/%s\n", + __func__, target->full_name, prop->name); + return ret; + } + } + + for_each_child_of_node(overlay, child) { + ret = of_overlay_apply_single_device_node(ov, target, child); + if (ret != 0) { + pr_err("%s: Failed to apply single node @%s/%s\n", + __func__, target->full_name, + child->name); + return ret; + } + } + + return 0; +} + +/** + * of_overlay_apply() - Apply @count overlays pointed at by @ovinfo_tab + * @ov: Overlay to apply + * + * Applies the overlays given, while handling all error conditions + * appropriately. Either the operation succeeds, or if it fails the + * live tree is reverted to the state before the attempt. + * Returns 0, or an error if the overlay attempt failed. + */ +static int of_overlay_apply(struct of_overlay *ov) +{ + int i, err; + + /* first we apply the overlays atomically */ + for (i = 0; i < ov->count; i++) { + struct of_overlay_info *ovinfo = &ov->ovinfo_tab[i]; + + err = of_overlay_apply_one(ov, ovinfo->target, ovinfo->overlay); + if (err != 0) { + pr_err("%s: overlay failed '%s'\n", + __func__, ovinfo->target->full_name); + return err; + } + } + + return 0; +} + +/* + * Find the target node using a number of different strategies + * in order of preference + * + * "target" property containing the phandle of the target + * "target-path" property containing the path of the target + */ +static struct device_node *find_target_node(struct device_node *info_node) +{ + const char *path; + u32 val; + int ret; + + /* first try to go by using the target as a phandle */ + ret = of_property_read_u32(info_node, "target", &val); + if (ret == 0) + return of_find_node_by_phandle(val); + + /* now try to locate by path */ + ret = of_property_read_string(info_node, "target-path", &path); + if (ret == 0) + return of_find_node_by_path(path); + + pr_err("%s: Failed to find target for node %p (%s)\n", __func__, + info_node, info_node->name); + + return NULL; +} + +/** + * of_fill_overlay_info() - Fill an overlay info structure + * @ov Overlay to fill + * @info_node: Device node containing the overlay + * @ovinfo: Pointer to the overlay info structure to fill + * + * Fills an overlay info structure with the overlay information + * from a device node. This device node must have a target property + * which contains a phandle of the overlay target node, and an + * __overlay__ child node which has the overlay contents. + * Both ovinfo->target & ovinfo->overlay have their references taken. + * + * Returns 0 on success, or a negative error value. + */ +static int of_fill_overlay_info(struct of_overlay *ov, + struct device_node *info_node, struct of_overlay_info *ovinfo) +{ + ovinfo->overlay = of_get_child_by_name(info_node, "__overlay__"); + if (ovinfo->overlay == NULL) + goto err_fail; + + ovinfo->target = find_target_node(info_node); + if (ovinfo->target == NULL) + goto err_fail; + + return 0; + +err_fail: + of_node_put(ovinfo->target); + of_node_put(ovinfo->overlay); + + memset(ovinfo, 0, sizeof(*ovinfo)); + return -EINVAL; +} + +/** + * of_build_overlay_info() - Build an overlay info array + * @ov Overlay to build + * @tree: Device node containing all the overlays + * + * Helper function that given a tree containing overlay information, + * allocates and builds an overlay info array containing it, ready + * for use using of_overlay_apply. + * + * Returns 0 on success with the @cntp @ovinfop pointers valid, + * while on error a negative error value is returned. + */ +static int of_build_overlay_info(struct of_overlay *ov, + struct device_node *tree) +{ + struct device_node *node; + struct of_overlay_info *ovinfo; + int cnt, err; + + /* worst case; every child is a node */ + cnt = 0; + for_each_child_of_node(tree, node) + cnt++; + + ovinfo = kcalloc(cnt, sizeof(*ovinfo), GFP_KERNEL); + if (ovinfo == NULL) + return -ENOMEM; + + cnt = 0; + for_each_child_of_node(tree, node) { + memset(&ovinfo[cnt], 0, sizeof(*ovinfo)); + err = of_fill_overlay_info(ov, node, &ovinfo[cnt]); + if (err == 0) + cnt++; + } + + /* if nothing filled, return error */ + if (cnt == 0) { + kfree(ovinfo); + return -ENODEV; + } + + ov->count = cnt; + ov->ovinfo_tab = ovinfo; + + return 0; +} + +/** + * of_free_overlay_info() - Free an overlay info array + * @ov Overlay to free the overlay info from + * @ovinfo_tab: Array of overlay_info's to free + * + * Releases the memory of a previously allocated ovinfo array + * by of_build_overlay_info. + * Returns 0, or an error if the arguments are bogus. + */ +static int of_free_overlay_info(struct of_overlay *ov) +{ + struct of_overlay_info *ovinfo; + int i; + + /* do it in reverse */ + for (i = ov->count - 1; i >= 0; i--) { + ovinfo = &ov->ovinfo_tab[i]; + + of_node_put(ovinfo->target); + of_node_put(ovinfo->overlay); + } + kfree(ov->ovinfo_tab); + + return 0; +} + +static LIST_HEAD(ov_list); +static DEFINE_IDR(ov_idr); + +/** + * of_overlay_create() - Create and apply an overlay + * @tree: Device node containing all the overlays + * + * Creates and applies an overlay while also keeping track + * of the overlay in a list. This list can be used to prevent + * illegal overlay removals. + * + * Returns the id of the created overlay, or an negative error number + */ +int of_overlay_create(struct device_node *tree) +{ + struct of_overlay *ov; + int err, id; + + /* allocate the overlay structure */ + ov = kzalloc(sizeof(*ov), GFP_KERNEL); + if (ov == NULL) + return -ENOMEM; + ov->id = -1; + + INIT_LIST_HEAD(&ov->node); + + of_changeset_init(&ov->cset); + + mutex_lock(&of_mutex); + + id = idr_alloc(&ov_idr, ov, 0, 0, GFP_KERNEL); + if (id < 0) { + pr_err("%s: idr_alloc() failed for tree@%s\n", + __func__, tree->full_name); + err = id; + goto err_destroy_trans; + } + ov->id = id; + + /* build the overlay info structures */ + err = of_build_overlay_info(ov, tree); + if (err) { + pr_err("%s: of_build_overlay_info() failed for tree@%s\n", + __func__, tree->full_name); + goto err_free_idr; + } + + /* apply the overlay */ + err = of_overlay_apply(ov); + if (err) { + pr_err("%s: of_overlay_apply() failed for tree@%s\n", + __func__, tree->full_name); + goto err_abort_trans; + } + + /* apply the changeset */ + err = of_changeset_apply(&ov->cset); + if (err) { + pr_err("%s: of_changeset_apply() failed for tree@%s\n", + __func__, tree->full_name); + goto err_revert_overlay; + } + + /* add to the tail of the overlay list */ + list_add_tail(&ov->node, &ov_list); + + mutex_unlock(&of_mutex); + + return id; + +err_revert_overlay: +err_abort_trans: + of_free_overlay_info(ov); +err_free_idr: + idr_remove(&ov_idr, ov->id); +err_destroy_trans: + of_changeset_destroy(&ov->cset); + kfree(ov); + mutex_unlock(&of_mutex); + + return err; +} +EXPORT_SYMBOL_GPL(of_overlay_create); + +/* check whether the given node, lies under the given tree */ +static int overlay_subtree_check(struct device_node *tree, + struct device_node *dn) +{ + struct device_node *child; + + /* match? */ + if (tree == dn) + return 1; + + for_each_child_of_node(tree, child) { + if (overlay_subtree_check(child, dn)) + return 1; + } + + return 0; +} + +/* check whether this overlay is the topmost */ +static int overlay_is_topmost(struct of_overlay *ov, struct device_node *dn) +{ + struct of_overlay *ovt; + struct of_changeset_entry *ce; + + list_for_each_entry_reverse(ovt, &ov_list, node) { + /* if we hit ourselves, we're done */ + if (ovt == ov) + break; + + /* check against each subtree affected by this overlay */ + list_for_each_entry(ce, &ovt->cset.entries, node) { + if (overlay_subtree_check(ce->np, dn)) { + pr_err("%s: #%d clashes #%d @%s\n", + __func__, ov->id, ovt->id, + dn->full_name); + return 0; + } + } + } + + /* overlay is topmost */ + return 1; +} + +/* + * We can safely remove the overlay only if it's the top-most one. + * Newly applied overlays are inserted at the tail of the overlay list, + * so a top most overlay is the one that is closest to the tail. + * + * The topmost check is done by exploiting this property. For each + * affected device node in the log list we check if this overlay is + * the one closest to the tail. If another overlay has affected this + * device node and is closest to the tail, then removal is not permited. + */ +static int overlay_removal_is_ok(struct of_overlay *ov) +{ + struct of_changeset_entry *ce; + + list_for_each_entry(ce, &ov->cset.entries, node) { + if (!overlay_is_topmost(ov, ce->np)) { + pr_err("%s: overlay #%d is not topmost\n", + __func__, ov->id); + return 0; + } + } + + return 1; +} + +/** + * of_overlay_destroy() - Removes an overlay + * @id: Overlay id number returned by a previous call to of_overlay_create + * + * Removes an overlay if it is permissible. + * + * Returns 0 on success, or an negative error number + */ +int of_overlay_destroy(int id) +{ + struct of_overlay *ov; + int err; + + mutex_lock(&of_mutex); + + ov = idr_find(&ov_idr, id); + if (ov == NULL) { + err = -ENODEV; + pr_err("%s: Could not find overlay #%d\n", + __func__, id); + goto out; + } + + /* check whether the overlay is safe to remove */ + if (!overlay_removal_is_ok(ov)) { + err = -EBUSY; + pr_err("%s: removal check failed for overlay #%d\n", + __func__, id); + goto out; + } + + + list_del(&ov->node); + of_changeset_revert(&ov->cset); + of_free_overlay_info(ov); + idr_remove(&ov_idr, id); + of_changeset_destroy(&ov->cset); + kfree(ov); + + err = 0; + +out: + mutex_unlock(&of_mutex); + + return err; +} +EXPORT_SYMBOL_GPL(of_overlay_destroy); + +/** + * of_overlay_destroy_all() - Removes all overlays from the system + * + * Removes all overlays from the system in the correct order. + * + * Returns 0 on success, or an negative error number + */ +int of_overlay_destroy_all(void) +{ + struct of_overlay *ov, *ovn; + + mutex_lock(&of_mutex); + + /* the tail of list is guaranteed to be safe to remove */ + list_for_each_entry_safe_reverse(ov, ovn, &ov_list, node) { + list_del(&ov->node); + of_changeset_revert(&ov->cset); + of_free_overlay_info(ov); + idr_remove(&ov_idr, ov->id); + kfree(ov); + } + + mutex_unlock(&of_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(of_overlay_destroy_all); diff --git a/drivers/of/pdt.c b/drivers/of/pdt.c new file mode 100644 index 000000000..d2acae825 --- /dev/null +++ b/drivers/of/pdt.c @@ -0,0 +1,245 @@ +/* pdt.c: OF PROM device tree support code. + * + * Paul Mackerras August 1996. + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. + * {engebret|bergner}@us.ibm.com + * + * Adapted for sparc by David S. Miller davem@davemloft.net + * Adapted for multiple architectures by Andres Salomon <dilinger@queued.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_pdt.h> + +static struct of_pdt_ops *of_pdt_prom_ops __initdata; + +void __initdata (*of_pdt_build_more)(struct device_node *dp); + +#if defined(CONFIG_SPARC) +unsigned int of_pdt_unique_id __initdata; + +#define of_pdt_incr_unique_id(p) do { \ + (p)->unique_id = of_pdt_unique_id++; \ +} while (0) + +static char * __init of_pdt_build_full_name(struct device_node *dp) +{ + int len, ourlen, plen; + char *n; + + dp->path_component_name = build_path_component(dp); + + plen = strlen(dp->parent->full_name); + ourlen = strlen(dp->path_component_name); + len = ourlen + plen + 2; + + n = prom_early_alloc(len); + strcpy(n, dp->parent->full_name); + if (!of_node_is_root(dp->parent)) { + strcpy(n + plen, "/"); + plen++; + } + strcpy(n + plen, dp->path_component_name); + + return n; +} + +#else /* CONFIG_SPARC */ + +static inline void of_pdt_incr_unique_id(void *p) { } +static inline void irq_trans_init(struct device_node *dp) { } + +static char * __init of_pdt_build_full_name(struct device_node *dp) +{ + static int failsafe_id = 0; /* for generating unique names on failure */ + char *buf; + int len; + + if (of_pdt_prom_ops->pkg2path(dp->phandle, NULL, 0, &len)) + goto failsafe; + + buf = prom_early_alloc(len + 1); + if (of_pdt_prom_ops->pkg2path(dp->phandle, buf, len, &len)) + goto failsafe; + return buf; + + failsafe: + buf = prom_early_alloc(strlen(dp->parent->full_name) + + strlen(dp->name) + 16); + sprintf(buf, "%s/%s@unknown%i", + of_node_is_root(dp->parent) ? "" : dp->parent->full_name, + dp->name, failsafe_id++); + pr_err("%s: pkg2path failed; assigning %s\n", __func__, buf); + return buf; +} + +#endif /* !CONFIG_SPARC */ + +static struct property * __init of_pdt_build_one_prop(phandle node, char *prev, + char *special_name, + void *special_val, + int special_len) +{ + static struct property *tmp = NULL; + struct property *p; + int err; + + if (tmp) { + p = tmp; + memset(p, 0, sizeof(*p) + 32); + tmp = NULL; + } else { + p = prom_early_alloc(sizeof(struct property) + 32); + of_pdt_incr_unique_id(p); + } + + p->name = (char *) (p + 1); + if (special_name) { + strcpy(p->name, special_name); + p->length = special_len; + p->value = prom_early_alloc(special_len); + memcpy(p->value, special_val, special_len); + } else { + err = of_pdt_prom_ops->nextprop(node, prev, p->name); + if (err) { + tmp = p; + return NULL; + } + p->length = of_pdt_prom_ops->getproplen(node, p->name); + if (p->length <= 0) { + p->length = 0; + } else { + int len; + + p->value = prom_early_alloc(p->length + 1); + len = of_pdt_prom_ops->getproperty(node, p->name, + p->value, p->length); + if (len <= 0) + p->length = 0; + ((unsigned char *)p->value)[p->length] = '\0'; + } + } + return p; +} + +static struct property * __init of_pdt_build_prop_list(phandle node) +{ + struct property *head, *tail; + + head = tail = of_pdt_build_one_prop(node, NULL, + ".node", &node, sizeof(node)); + + tail->next = of_pdt_build_one_prop(node, NULL, NULL, NULL, 0); + tail = tail->next; + while(tail) { + tail->next = of_pdt_build_one_prop(node, tail->name, + NULL, NULL, 0); + tail = tail->next; + } + + return head; +} + +static char * __init of_pdt_get_one_property(phandle node, const char *name) +{ + char *buf = "<NULL>"; + int len; + + len = of_pdt_prom_ops->getproplen(node, name); + if (len > 0) { + buf = prom_early_alloc(len); + len = of_pdt_prom_ops->getproperty(node, name, buf, len); + } + + return buf; +} + +static struct device_node * __init of_pdt_create_node(phandle node, + struct device_node *parent) +{ + struct device_node *dp; + + if (!node) + return NULL; + + dp = prom_early_alloc(sizeof(*dp)); + of_node_init(dp); + of_pdt_incr_unique_id(dp); + dp->parent = parent; + + dp->name = of_pdt_get_one_property(node, "name"); + dp->type = of_pdt_get_one_property(node, "device_type"); + dp->phandle = node; + + dp->properties = of_pdt_build_prop_list(node); + + irq_trans_init(dp); + + return dp; +} + +static struct device_node * __init of_pdt_build_tree(struct device_node *parent, + phandle node) +{ + struct device_node *ret = NULL, *prev_sibling = NULL; + struct device_node *dp; + + while (1) { + dp = of_pdt_create_node(node, parent); + if (!dp) + break; + + if (prev_sibling) + prev_sibling->sibling = dp; + + if (!ret) + ret = dp; + prev_sibling = dp; + + dp->full_name = of_pdt_build_full_name(dp); + + dp->child = of_pdt_build_tree(dp, of_pdt_prom_ops->getchild(node)); + + if (of_pdt_build_more) + of_pdt_build_more(dp); + + node = of_pdt_prom_ops->getsibling(node); + } + + return ret; +} + +static void * __init kernel_tree_alloc(u64 size, u64 align) +{ + return prom_early_alloc(size); +} + +void __init of_pdt_build_devicetree(phandle root_node, struct of_pdt_ops *ops) +{ + BUG_ON(!ops); + of_pdt_prom_ops = ops; + + of_root = of_pdt_create_node(root_node, NULL); +#if defined(CONFIG_SPARC) + of_root->path_component_name = ""; +#endif + of_root->full_name = "/"; + + of_root->child = of_pdt_build_tree(of_root, + of_pdt_prom_ops->getchild(of_root->phandle)); + + /* Get pointer to "/chosen" and "/aliases" nodes for use everywhere */ + of_alias_scan(kernel_tree_alloc); +} diff --git a/drivers/of/platform.c b/drivers/of/platform.c new file mode 100644 index 000000000..a01f57c9e --- /dev/null +++ b/drivers/of/platform.c @@ -0,0 +1,566 @@ +/* + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + * and Arnd Bergmann, IBM Corp. + * Merged from powerpc/kernel/of_platform.c and + * sparc{,64}/kernel/of_device.c by Stephen Rothwell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/amba/bus.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> + +const struct of_device_id of_default_bus_match_table[] = { + { .compatible = "simple-bus", }, +#ifdef CONFIG_ARM_AMBA + { .compatible = "arm,amba-bus", }, +#endif /* CONFIG_ARM_AMBA */ + {} /* Empty terminated list */ +}; + +static int of_dev_node_match(struct device *dev, void *data) +{ + return dev->of_node == data; +} + +/** + * of_find_device_by_node - Find the platform_device associated with a node + * @np: Pointer to device tree node + * + * Returns platform_device pointer, or NULL if not found + */ +struct platform_device *of_find_device_by_node(struct device_node *np) +{ + struct device *dev; + + dev = bus_find_device(&platform_bus_type, NULL, np, of_dev_node_match); + return dev ? to_platform_device(dev) : NULL; +} +EXPORT_SYMBOL(of_find_device_by_node); + +#ifdef CONFIG_OF_ADDRESS +/* + * The following routines scan a subtree and registers a device for + * each applicable node. + * + * Note: sparc doesn't use these routines because it has a different + * mechanism for creating devices from device tree nodes. + */ + +/** + * of_device_make_bus_id - Use the device node data to assign a unique name + * @dev: pointer to device structure that is linked to a device tree node + * + * This routine will first try using the translated bus address to + * derive a unique name. If it cannot, then it will prepend names from + * parent nodes until a unique name can be derived. + */ +void of_device_make_bus_id(struct device *dev) +{ + struct device_node *node = dev->of_node; + const __be32 *reg; + u64 addr; + + /* Construct the name, using parent nodes if necessary to ensure uniqueness */ + while (node->parent) { + /* + * If the address can be translated, then that is as much + * uniqueness as we need. Make it the first component and return + */ + reg = of_get_property(node, "reg", NULL); + if (reg && (addr = of_translate_address(node, reg)) != OF_BAD_ADDR) { + dev_set_name(dev, dev_name(dev) ? "%llx.%s:%s" : "%llx.%s", + (unsigned long long)addr, node->name, + dev_name(dev)); + return; + } + + /* format arguments only used if dev_name() resolves to NULL */ + dev_set_name(dev, dev_name(dev) ? "%s:%s" : "%s", + strrchr(node->full_name, '/') + 1, dev_name(dev)); + node = node->parent; + } +} + +/** + * of_device_alloc - Allocate and initialize an of_device + * @np: device node to assign to device + * @bus_id: Name to assign to the device. May be null to use default name. + * @parent: Parent device. + */ +struct platform_device *of_device_alloc(struct device_node *np, + const char *bus_id, + struct device *parent) +{ + struct platform_device *dev; + int rc, i, num_reg = 0, num_irq; + struct resource *res, temp_res; + + dev = platform_device_alloc("", -1); + if (!dev) + return NULL; + + /* count the io and irq resources */ + while (of_address_to_resource(np, num_reg, &temp_res) == 0) + num_reg++; + num_irq = of_irq_count(np); + + /* Populate the resource table */ + if (num_irq || num_reg) { + res = kzalloc(sizeof(*res) * (num_irq + num_reg), GFP_KERNEL); + if (!res) { + platform_device_put(dev); + return NULL; + } + + dev->num_resources = num_reg + num_irq; + dev->resource = res; + for (i = 0; i < num_reg; i++, res++) { + rc = of_address_to_resource(np, i, res); + WARN_ON(rc); + } + if (of_irq_to_resource_table(np, res, num_irq) != num_irq) + pr_debug("not all legacy IRQ resources mapped for %s\n", + np->name); + } + + dev->dev.of_node = of_node_get(np); + dev->dev.parent = parent ? : &platform_bus; + + if (bus_id) + dev_set_name(&dev->dev, "%s", bus_id); + else + of_device_make_bus_id(&dev->dev); + + return dev; +} +EXPORT_SYMBOL(of_device_alloc); + +static void of_dma_deconfigure(struct device *dev) +{ + arch_teardown_dma_ops(dev); +} + +/** + * of_platform_device_create_pdata - Alloc, initialize and register an of_device + * @np: pointer to node to create device for + * @bus_id: name to assign device + * @platform_data: pointer to populate platform_data pointer with + * @parent: Linux device model parent device. + * + * Returns pointer to created platform device, or NULL if a device was not + * registered. Unavailable devices will not get registered. + */ +static struct platform_device *of_platform_device_create_pdata( + struct device_node *np, + const char *bus_id, + void *platform_data, + struct device *parent) +{ + struct platform_device *dev; + + if (!of_device_is_available(np) || + of_node_test_and_set_flag(np, OF_POPULATED)) + return NULL; + + dev = of_device_alloc(np, bus_id, parent); + if (!dev) + goto err_clear_flag; + + dev->dev.bus = &platform_bus_type; + dev->dev.platform_data = platform_data; + of_dma_configure(&dev->dev, dev->dev.of_node); + + if (of_device_add(dev) != 0) { + of_dma_deconfigure(&dev->dev); + platform_device_put(dev); + goto err_clear_flag; + } + + return dev; + +err_clear_flag: + of_node_clear_flag(np, OF_POPULATED); + return NULL; +} + +/** + * of_platform_device_create - Alloc, initialize and register an of_device + * @np: pointer to node to create device for + * @bus_id: name to assign device + * @parent: Linux device model parent device. + * + * Returns pointer to created platform device, or NULL if a device was not + * registered. Unavailable devices will not get registered. + */ +struct platform_device *of_platform_device_create(struct device_node *np, + const char *bus_id, + struct device *parent) +{ + return of_platform_device_create_pdata(np, bus_id, NULL, parent); +} +EXPORT_SYMBOL(of_platform_device_create); + +#ifdef CONFIG_ARM_AMBA +static struct amba_device *of_amba_device_create(struct device_node *node, + const char *bus_id, + void *platform_data, + struct device *parent) +{ + struct amba_device *dev; + const void *prop; + int i, ret; + + pr_debug("Creating amba device %s\n", node->full_name); + + if (!of_device_is_available(node) || + of_node_test_and_set_flag(node, OF_POPULATED)) + return NULL; + + dev = amba_device_alloc(NULL, 0, 0); + if (!dev) { + pr_err("%s(): amba_device_alloc() failed for %s\n", + __func__, node->full_name); + goto err_clear_flag; + } + + /* setup generic device info */ + dev->dev.of_node = of_node_get(node); + dev->dev.parent = parent ? : &platform_bus; + dev->dev.platform_data = platform_data; + if (bus_id) + dev_set_name(&dev->dev, "%s", bus_id); + else + of_device_make_bus_id(&dev->dev); + of_dma_configure(&dev->dev, dev->dev.of_node); + + /* Allow the HW Peripheral ID to be overridden */ + prop = of_get_property(node, "arm,primecell-periphid", NULL); + if (prop) + dev->periphid = of_read_ulong(prop, 1); + + /* Decode the IRQs and address ranges */ + for (i = 0; i < AMBA_NR_IRQS; i++) + dev->irq[i] = irq_of_parse_and_map(node, i); + + ret = of_address_to_resource(node, 0, &dev->res); + if (ret) { + pr_err("%s(): of_address_to_resource() failed (%d) for %s\n", + __func__, ret, node->full_name); + goto err_free; + } + + ret = amba_device_add(dev, &iomem_resource); + if (ret) { + pr_err("%s(): amba_device_add() failed (%d) for %s\n", + __func__, ret, node->full_name); + goto err_free; + } + + return dev; + +err_free: + amba_device_put(dev); +err_clear_flag: + of_node_clear_flag(node, OF_POPULATED); + return NULL; +} +#else /* CONFIG_ARM_AMBA */ +static struct amba_device *of_amba_device_create(struct device_node *node, + const char *bus_id, + void *platform_data, + struct device *parent) +{ + return NULL; +} +#endif /* CONFIG_ARM_AMBA */ + +/** + * of_devname_lookup() - Given a device node, lookup the preferred Linux name + */ +static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *lookup, + struct device_node *np) +{ + struct resource res; + + if (!lookup) + return NULL; + + for(; lookup->compatible != NULL; lookup++) { + if (!of_device_is_compatible(np, lookup->compatible)) + continue; + if (!of_address_to_resource(np, 0, &res)) + if (res.start != lookup->phys_addr) + continue; + pr_debug("%s: devname=%s\n", np->full_name, lookup->name); + return lookup; + } + + return NULL; +} + +/** + * of_platform_bus_create() - Create a device for a node and its children. + * @bus: device node of the bus to instantiate + * @matches: match table for bus nodes + * @lookup: auxdata table for matching id and platform_data with device nodes + * @parent: parent for new device, or NULL for top level. + * @strict: require compatible property + * + * Creates a platform_device for the provided device_node, and optionally + * recursively create devices for all the child nodes. + */ +static int of_platform_bus_create(struct device_node *bus, + const struct of_device_id *matches, + const struct of_dev_auxdata *lookup, + struct device *parent, bool strict) +{ + const struct of_dev_auxdata *auxdata; + struct device_node *child; + struct platform_device *dev; + const char *bus_id = NULL; + void *platform_data = NULL; + int rc = 0; + + /* Make sure it has a compatible property */ + if (strict && (!of_get_property(bus, "compatible", NULL))) { + pr_debug("%s() - skipping %s, no compatible prop\n", + __func__, bus->full_name); + return 0; + } + + auxdata = of_dev_lookup(lookup, bus); + if (auxdata) { + bus_id = auxdata->name; + platform_data = auxdata->platform_data; + } + + if (of_device_is_compatible(bus, "arm,primecell")) { + /* + * Don't return an error here to keep compatibility with older + * device tree files. + */ + of_amba_device_create(bus, bus_id, platform_data, parent); + return 0; + } + + dev = of_platform_device_create_pdata(bus, bus_id, platform_data, parent); + if (!dev || !of_match_node(matches, bus)) + return 0; + + for_each_child_of_node(bus, child) { + pr_debug(" create child: %s\n", child->full_name); + rc = of_platform_bus_create(child, matches, lookup, &dev->dev, strict); + if (rc) { + of_node_put(child); + break; + } + } + of_node_set_flag(bus, OF_POPULATED_BUS); + return rc; +} + +/** + * of_platform_bus_probe() - Probe the device-tree for platform buses + * @root: parent of the first level to probe or NULL for the root of the tree + * @matches: match table for bus nodes + * @parent: parent to hook devices from, NULL for toplevel + * + * Note that children of the provided root are not instantiated as devices + * unless the specified root itself matches the bus list and is not NULL. + */ +int of_platform_bus_probe(struct device_node *root, + const struct of_device_id *matches, + struct device *parent) +{ + struct device_node *child; + int rc = 0; + + root = root ? of_node_get(root) : of_find_node_by_path("/"); + if (!root) + return -EINVAL; + + pr_debug("of_platform_bus_probe()\n"); + pr_debug(" starting at: %s\n", root->full_name); + + /* Do a self check of bus type, if there's a match, create children */ + if (of_match_node(matches, root)) { + rc = of_platform_bus_create(root, matches, NULL, parent, false); + } else for_each_child_of_node(root, child) { + if (!of_match_node(matches, child)) + continue; + rc = of_platform_bus_create(child, matches, NULL, parent, false); + if (rc) + break; + } + + of_node_put(root); + return rc; +} +EXPORT_SYMBOL(of_platform_bus_probe); + +/** + * of_platform_populate() - Populate platform_devices from device tree data + * @root: parent of the first level to probe or NULL for the root of the tree + * @matches: match table, NULL to use the default + * @lookup: auxdata table for matching id and platform_data with device nodes + * @parent: parent to hook devices from, NULL for toplevel + * + * Similar to of_platform_bus_probe(), this function walks the device tree + * and creates devices from nodes. It differs in that it follows the modern + * convention of requiring all device nodes to have a 'compatible' property, + * and it is suitable for creating devices which are children of the root + * node (of_platform_bus_probe will only create children of the root which + * are selected by the @matches argument). + * + * New board support should be using this function instead of + * of_platform_bus_probe(). + * + * Returns 0 on success, < 0 on failure. + */ +int of_platform_populate(struct device_node *root, + const struct of_device_id *matches, + const struct of_dev_auxdata *lookup, + struct device *parent) +{ + struct device_node *child; + int rc = 0; + + root = root ? of_node_get(root) : of_find_node_by_path("/"); + if (!root) + return -EINVAL; + + for_each_child_of_node(root, child) { + rc = of_platform_bus_create(child, matches, lookup, parent, true); + if (rc) + break; + } + of_node_set_flag(root, OF_POPULATED_BUS); + + of_node_put(root); + return rc; +} +EXPORT_SYMBOL_GPL(of_platform_populate); + +static int of_platform_device_destroy(struct device *dev, void *data) +{ + /* Do not touch devices not populated from the device tree */ + if (!dev->of_node || !of_node_check_flag(dev->of_node, OF_POPULATED)) + return 0; + + /* Recurse for any nodes that were treated as busses */ + if (of_node_check_flag(dev->of_node, OF_POPULATED_BUS)) + device_for_each_child(dev, NULL, of_platform_device_destroy); + + if (dev->bus == &platform_bus_type) + platform_device_unregister(to_platform_device(dev)); +#ifdef CONFIG_ARM_AMBA + else if (dev->bus == &amba_bustype) + amba_device_unregister(to_amba_device(dev)); +#endif + + of_dma_deconfigure(dev); + of_node_clear_flag(dev->of_node, OF_POPULATED); + of_node_clear_flag(dev->of_node, OF_POPULATED_BUS); + return 0; +} + +/** + * of_platform_depopulate() - Remove devices populated from device tree + * @parent: device which children will be removed + * + * Complementary to of_platform_populate(), this function removes children + * of the given device (and, recurrently, their children) that have been + * created from their respective device tree nodes (and only those, + * leaving others - eg. manually created - unharmed). + * + * Returns 0 when all children devices have been removed or + * -EBUSY when some children remained. + */ +void of_platform_depopulate(struct device *parent) +{ + if (parent->of_node && of_node_check_flag(parent->of_node, OF_POPULATED_BUS)) { + device_for_each_child(parent, NULL, of_platform_device_destroy); + of_node_clear_flag(parent->of_node, OF_POPULATED_BUS); + } +} +EXPORT_SYMBOL_GPL(of_platform_depopulate); + +#ifdef CONFIG_OF_DYNAMIC +static int of_platform_notify(struct notifier_block *nb, + unsigned long action, void *arg) +{ + struct of_reconfig_data *rd = arg; + struct platform_device *pdev_parent, *pdev; + bool children_left; + + switch (of_reconfig_get_state_change(action, rd)) { + case OF_RECONFIG_CHANGE_ADD: + /* verify that the parent is a bus */ + if (!of_node_check_flag(rd->dn->parent, OF_POPULATED_BUS)) + return NOTIFY_OK; /* not for us */ + + /* already populated? (driver using of_populate manually) */ + if (of_node_check_flag(rd->dn, OF_POPULATED)) + return NOTIFY_OK; + + /* pdev_parent may be NULL when no bus platform device */ + pdev_parent = of_find_device_by_node(rd->dn->parent); + pdev = of_platform_device_create(rd->dn, NULL, + pdev_parent ? &pdev_parent->dev : NULL); + of_dev_put(pdev_parent); + + if (pdev == NULL) { + pr_err("%s: failed to create for '%s'\n", + __func__, rd->dn->full_name); + /* of_platform_device_create tosses the error code */ + return notifier_from_errno(-EINVAL); + } + break; + + case OF_RECONFIG_CHANGE_REMOVE: + + /* already depopulated? */ + if (!of_node_check_flag(rd->dn, OF_POPULATED)) + return NOTIFY_OK; + + /* find our device by node */ + pdev = of_find_device_by_node(rd->dn); + if (pdev == NULL) + return NOTIFY_OK; /* no? not meant for us */ + + /* unregister takes one ref away */ + of_platform_device_destroy(&pdev->dev, &children_left); + + /* and put the reference of the find */ + of_dev_put(pdev); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block platform_of_notifier = { + .notifier_call = of_platform_notify, +}; + +void of_platform_register_reconfig_notifier(void) +{ + WARN_ON(of_reconfig_notifier_register(&platform_of_notifier)); +} +#endif /* CONFIG_OF_DYNAMIC */ + +#endif /* CONFIG_OF_ADDRESS */ diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c new file mode 100644 index 000000000..640eb4cb4 --- /dev/null +++ b/drivers/of/resolver.c @@ -0,0 +1,412 @@ +/* + * Functions for dealing with DT resolution + * + * Copyright (C) 2012 Pantelis Antoniou <panto@antoniou-consulting.com> + * Copyright (C) 2012 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/slab.h> + +/* illegal phandle value (set when unresolved) */ +#define OF_PHANDLE_ILLEGAL 0xdeadbeef + +/** + * Find a node with the give full name by recursively following any of + * the child node links. + */ +static struct device_node *__of_find_node_by_full_name(struct device_node *node, + const char *full_name) +{ + struct device_node *child, *found; + + if (node == NULL) + return NULL; + + /* check */ + if (of_node_cmp(node->full_name, full_name) == 0) + return node; + + for_each_child_of_node(node, child) { + found = __of_find_node_by_full_name(child, full_name); + if (found != NULL) + return found; + } + + return NULL; +} + +/* + * Find live tree's maximum phandle value. + */ +static phandle of_get_tree_max_phandle(void) +{ + struct device_node *node; + phandle phandle; + unsigned long flags; + + /* now search recursively */ + raw_spin_lock_irqsave(&devtree_lock, flags); + phandle = 0; + for_each_of_allnodes(node) { + if (node->phandle != OF_PHANDLE_ILLEGAL && + node->phandle > phandle) + phandle = node->phandle; + } + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + return phandle; +} + +/* + * Adjust a subtree's phandle values by a given delta. + * Makes sure not to just adjust the device node's phandle value, + * but modify the phandle properties values as well. + */ +static void __of_adjust_tree_phandles(struct device_node *node, + int phandle_delta) +{ + struct device_node *child; + struct property *prop; + phandle phandle; + + /* first adjust the node's phandle direct value */ + if (node->phandle != 0 && node->phandle != OF_PHANDLE_ILLEGAL) + node->phandle += phandle_delta; + + /* now adjust phandle & linux,phandle values */ + for_each_property_of_node(node, prop) { + + /* only look for these two */ + if (of_prop_cmp(prop->name, "phandle") != 0 && + of_prop_cmp(prop->name, "linux,phandle") != 0) + continue; + + /* must be big enough */ + if (prop->length < 4) + continue; + + /* read phandle value */ + phandle = be32_to_cpup(prop->value); + if (phandle == OF_PHANDLE_ILLEGAL) /* unresolved */ + continue; + + /* adjust */ + *(uint32_t *)prop->value = cpu_to_be32(node->phandle); + } + + /* now do the children recursively */ + for_each_child_of_node(node, child) + __of_adjust_tree_phandles(child, phandle_delta); +} + +static int __of_adjust_phandle_ref(struct device_node *node, + struct property *rprop, int value) +{ + phandle phandle; + struct device_node *refnode; + struct property *sprop; + char *propval, *propcur, *propend, *nodestr, *propstr, *s; + int offset, propcurlen; + int err = 0; + + /* make a copy */ + propval = kmalloc(rprop->length, GFP_KERNEL); + if (!propval) { + pr_err("%s: Could not copy value of '%s'\n", + __func__, rprop->name); + return -ENOMEM; + } + memcpy(propval, rprop->value, rprop->length); + + propend = propval + rprop->length; + for (propcur = propval; propcur < propend; propcur += propcurlen + 1) { + propcurlen = strlen(propcur); + + nodestr = propcur; + s = strchr(propcur, ':'); + if (!s) { + pr_err("%s: Illegal symbol entry '%s' (1)\n", + __func__, propcur); + err = -EINVAL; + goto err_fail; + } + *s++ = '\0'; + + propstr = s; + s = strchr(s, ':'); + if (!s) { + pr_err("%s: Illegal symbol entry '%s' (2)\n", + __func__, (char *)rprop->value); + err = -EINVAL; + goto err_fail; + } + + *s++ = '\0'; + err = kstrtoint(s, 10, &offset); + if (err != 0) { + pr_err("%s: Could get offset '%s'\n", + __func__, (char *)rprop->value); + goto err_fail; + } + + /* look into the resolve node for the full path */ + refnode = __of_find_node_by_full_name(node, nodestr); + if (!refnode) { + pr_warn("%s: Could not find refnode '%s'\n", + __func__, (char *)rprop->value); + continue; + } + + /* now find the property */ + for_each_property_of_node(refnode, sprop) { + if (of_prop_cmp(sprop->name, propstr) == 0) + break; + } + + if (!sprop) { + pr_err("%s: Could not find property '%s'\n", + __func__, (char *)rprop->value); + err = -ENOENT; + goto err_fail; + } + + phandle = value; + *(__be32 *)(sprop->value + offset) = cpu_to_be32(phandle); + } + +err_fail: + kfree(propval); + return err; +} + +/* compare nodes taking into account that 'name' strips out the @ part */ +static int __of_node_name_cmp(const struct device_node *dn1, + const struct device_node *dn2) +{ + const char *n1 = strrchr(dn1->full_name, '/') ? : "/"; + const char *n2 = strrchr(dn2->full_name, '/') ? : "/"; + + return of_node_cmp(n1, n2); +} + +/* + * Adjust the local phandle references by the given phandle delta. + * Assumes the existances of a __local_fixups__ node at the root. + * Assumes that __of_verify_tree_phandle_references has been called. + * Does not take any devtree locks so make sure you call this on a tree + * which is at the detached state. + */ +static int __of_adjust_tree_phandle_references(struct device_node *node, + struct device_node *target, int phandle_delta) +{ + struct device_node *child, *childtarget; + struct property *rprop, *sprop; + int err, i, count; + unsigned int off; + phandle phandle; + + if (node == NULL) + return 0; + + for_each_property_of_node(node, rprop) { + + /* skip properties added automatically */ + if (of_prop_cmp(rprop->name, "name") == 0 || + of_prop_cmp(rprop->name, "phandle") == 0 || + of_prop_cmp(rprop->name, "linux,phandle") == 0) + continue; + + if ((rprop->length % 4) != 0 || rprop->length == 0) { + pr_err("%s: Illegal property (size) '%s' @%s\n", + __func__, rprop->name, node->full_name); + return -EINVAL; + } + count = rprop->length / sizeof(__be32); + + /* now find the target property */ + for_each_property_of_node(target, sprop) { + if (of_prop_cmp(sprop->name, rprop->name) == 0) + break; + } + + if (sprop == NULL) { + pr_err("%s: Could not find target property '%s' @%s\n", + __func__, rprop->name, node->full_name); + return -EINVAL; + } + + for (i = 0; i < count; i++) { + off = be32_to_cpu(((__be32 *)rprop->value)[i]); + /* make sure the offset doesn't overstep (even wrap) */ + if (off >= sprop->length || + (off + 4) > sprop->length) { + pr_err("%s: Illegal property '%s' @%s\n", + __func__, rprop->name, + node->full_name); + return -EINVAL; + } + + if (phandle_delta) { + /* adjust */ + phandle = be32_to_cpu(*(__be32 *)(sprop->value + off)); + phandle += phandle_delta; + *(__be32 *)(sprop->value + off) = cpu_to_be32(phandle); + } + } + } + + for_each_child_of_node(node, child) { + + for_each_child_of_node(target, childtarget) + if (__of_node_name_cmp(child, childtarget) == 0) + break; + + if (!childtarget) { + pr_err("%s: Could not find target child '%s' @%s\n", + __func__, child->name, node->full_name); + return -EINVAL; + } + + err = __of_adjust_tree_phandle_references(child, childtarget, + phandle_delta); + if (err != 0) + return err; + } + + return 0; +} + +/** + * of_resolve - Resolve the given node against the live tree. + * + * @resolve: Node to resolve + * + * Perform dynamic Device Tree resolution against the live tree + * to the given node to resolve. This depends on the live tree + * having a __symbols__ node, and the resolve node the __fixups__ & + * __local_fixups__ nodes (if needed). + * The result of the operation is a resolve node that it's contents + * are fit to be inserted or operate upon the live tree. + * Returns 0 on success or a negative error value on error. + */ +int of_resolve_phandles(struct device_node *resolve) +{ + struct device_node *child, *childroot, *refnode; + struct device_node *root_sym, *resolve_sym, *resolve_fix; + struct property *rprop; + const char *refpath; + phandle phandle, phandle_delta; + int err; + + /* the resolve node must exist, and be detached */ + if (!resolve || !of_node_check_flag(resolve, OF_DETACHED)) + return -EINVAL; + + /* first we need to adjust the phandles */ + phandle_delta = of_get_tree_max_phandle() + 1; + __of_adjust_tree_phandles(resolve, phandle_delta); + + /* locate the local fixups */ + childroot = NULL; + for_each_child_of_node(resolve, childroot) + if (of_node_cmp(childroot->name, "__local_fixups__") == 0) + break; + + if (childroot != NULL) { + /* resolve root is guaranteed to be the '/' */ + err = __of_adjust_tree_phandle_references(childroot, + resolve, 0); + if (err != 0) + return err; + + BUG_ON(__of_adjust_tree_phandle_references(childroot, + resolve, phandle_delta)); + } + + root_sym = NULL; + resolve_sym = NULL; + resolve_fix = NULL; + + /* this may fail (if no fixups are required) */ + root_sym = of_find_node_by_path("/__symbols__"); + + /* locate the symbols & fixups nodes on resolve */ + for_each_child_of_node(resolve, child) { + + if (!resolve_sym && + of_node_cmp(child->name, "__symbols__") == 0) + resolve_sym = child; + + if (!resolve_fix && + of_node_cmp(child->name, "__fixups__") == 0) + resolve_fix = child; + + /* both found, don't bother anymore */ + if (resolve_sym && resolve_fix) + break; + } + + /* we do allow for the case where no fixups are needed */ + if (!resolve_fix) { + err = 0; /* no error */ + goto out; + } + + /* we need to fixup, but no root symbols... */ + if (!root_sym) { + err = -EINVAL; + goto out; + } + + for_each_property_of_node(resolve_fix, rprop) { + + /* skip properties added automatically */ + if (of_prop_cmp(rprop->name, "name") == 0) + continue; + + err = of_property_read_string(root_sym, + rprop->name, &refpath); + if (err != 0) { + pr_err("%s: Could not find symbol '%s'\n", + __func__, rprop->name); + goto out; + } + + refnode = of_find_node_by_path(refpath); + if (!refnode) { + pr_err("%s: Could not find node by path '%s'\n", + __func__, refpath); + err = -ENOENT; + goto out; + } + + phandle = refnode->phandle; + of_node_put(refnode); + + pr_debug("%s: %s phandle is 0x%08x\n", + __func__, rprop->name, phandle); + + err = __of_adjust_phandle_ref(resolve, rprop, phandle); + if (err) + break; + } + +out: + /* NULL is handled by of_node_put as NOP */ + of_node_put(root_sym); + + return err; +} +EXPORT_SYMBOL_GPL(of_resolve_phandles); diff --git a/drivers/of/unittest-data/.gitignore b/drivers/of/unittest-data/.gitignore new file mode 100644 index 000000000..4b3cf8b16 --- /dev/null +++ b/drivers/of/unittest-data/.gitignore @@ -0,0 +1,2 @@ +testcases.dtb +testcases.dtb.S diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile new file mode 100644 index 000000000..1ac5cc01d --- /dev/null +++ b/drivers/of/unittest-data/Makefile @@ -0,0 +1,7 @@ +obj-y += testcases.dtb.o + +targets += testcases.dtb testcases.dtb.S + +.SECONDARY: \ + $(obj)/testcases.dtb.S \ + $(obj)/testcases.dtb diff --git a/drivers/of/unittest-data/testcases.dts b/drivers/of/unittest-data/testcases.dts new file mode 100644 index 000000000..12f7c3d64 --- /dev/null +++ b/drivers/of/unittest-data/testcases.dts @@ -0,0 +1,79 @@ +/dts-v1/; +/ { + testcase-data { + changeset { + prop-update = "hello"; + prop-remove = "world"; + node-remove { + }; + }; + }; +}; +#include "tests-phandle.dtsi" +#include "tests-interrupts.dtsi" +#include "tests-match.dtsi" +#include "tests-platform.dtsi" +#include "tests-overlay.dtsi" + +/* + * phandle fixup data - generated by dtc patches that aren't upstream. + * This data must be regenerated whenever phandle references are modified in + * the testdata tree. + * + * The format of this data may be subject to change. For the time being consider + * this a kernel-internal data format. + */ +/ { __local_fixups__ { + testcase-data { + phandle-tests { + consumer-a { + phandle-list = <0x00000000 0x00000008 + 0x00000018 0x00000028 + 0x00000034 0x00000038>; + phandle-list-bad-args = <0x00000000 0x0000000c>; + }; + }; + interrupts { + intmap0 { + interrupt-map = <0x00000004 0x00000010 + 0x00000024 0x00000034>; + }; + intmap1 { + interrupt-map = <0x0000000c>; + }; + interrupts0 { + interrupt-parent = <0x00000000>; + }; + interrupts1 { + interrupt-parent = <0x00000000>; + }; + interrupts-extended0 { + interrupts-extended = <0x00000000 0x00000008 + 0x00000018 0x00000024 + 0x0000002c 0x00000034 + 0x0000003c>; + }; + }; + testcase-device1 { + interrupt-parent = <0x00000000>; + }; + testcase-device2 { + interrupt-parent = <0x00000000>; + }; + overlay2 { + fragment@0 { + target = <0x00000000>; + }; + }; + overlay3 { + fragment@0 { + target = <0x00000000>; + }; + }; + overlay4 { + fragment@0 { + target = <0x00000000>; + }; + }; + }; +}; }; diff --git a/drivers/of/unittest-data/tests-interrupts.dtsi b/drivers/of/unittest-data/tests-interrupts.dtsi new file mode 100644 index 000000000..da4695f60 --- /dev/null +++ b/drivers/of/unittest-data/tests-interrupts.dtsi @@ -0,0 +1,71 @@ + +/ { + testcase-data { + interrupts { + #address-cells = <1>; + #size-cells = <1>; + test_intc0: intc0 { + interrupt-controller; + #interrupt-cells = <1>; + }; + + test_intc1: intc1 { + interrupt-controller; + #interrupt-cells = <3>; + }; + + test_intc2: intc2 { + interrupt-controller; + #interrupt-cells = <2>; + }; + + test_intmap0: intmap0 { + #interrupt-cells = <1>; + #address-cells = <0>; + interrupt-map = <1 &test_intc0 9>, + <2 &test_intc1 10 11 12>, + <3 &test_intc2 13 14>, + <4 &test_intc2 15 16>; + }; + + test_intmap1: intmap1 { + #interrupt-cells = <2>; + interrupt-map = <0x5000 1 2 &test_intc0 15>; + }; + + interrupts0 { + interrupt-parent = <&test_intc0>; + interrupts = <1>, <2>, <3>, <4>; + }; + + interrupts1 { + interrupt-parent = <&test_intmap0>; + interrupts = <1>, <2>, <3>, <4>; + }; + + interrupts-extended0 { + reg = <0x5000 0x100>; + interrupts-extended = <&test_intc0 1>, + <&test_intc1 2 3 4>, + <&test_intc2 5 6>, + <&test_intmap0 1>, + <&test_intmap0 2>, + <&test_intmap0 3>, + <&test_intmap1 1 2>; + }; + }; + + testcase-device1 { + compatible = "testcase-device"; + interrupt-parent = <&test_intc0>; + interrupts = <1>; + }; + + testcase-device2 { + compatible = "testcase-device"; + interrupt-parent = <&test_intc2>; + interrupts = <1>; /* invalid specifier - too short */ + }; + }; + +}; diff --git a/drivers/of/unittest-data/tests-match.dtsi b/drivers/of/unittest-data/tests-match.dtsi new file mode 100644 index 000000000..c9e541129 --- /dev/null +++ b/drivers/of/unittest-data/tests-match.dtsi @@ -0,0 +1,19 @@ + +/ { + testcase-data { + match-node { + name0 { }; + name1 { device_type = "type1"; }; + a { name2 { device_type = "type1"; }; }; + b { name2 { }; }; + c { name2 { device_type = "type2"; }; }; + name3 { compatible = "compat3"; }; + name4 { compatible = "compat2", "compat3"; }; + name5 { compatible = "compat2", "compat3"; }; + name6 { compatible = "compat1", "compat2", "compat3"; }; + name7 { compatible = "compat2"; device_type = "type1"; }; + name8 { compatible = "compat2"; device_type = "type1"; }; + name9 { compatible = "compat2"; }; + }; + }; +}; diff --git a/drivers/of/unittest-data/tests-overlay.dtsi b/drivers/of/unittest-data/tests-overlay.dtsi new file mode 100644 index 000000000..02ba56c20 --- /dev/null +++ b/drivers/of/unittest-data/tests-overlay.dtsi @@ -0,0 +1,329 @@ + +/ { + testcase-data { + overlay-node { + + /* test bus */ + unittestbus: test-bus { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + unittest100: test-unittest100 { + compatible = "unittest"; + status = "okay"; + reg = <100>; + }; + + unittest101: test-unittest101 { + compatible = "unittest"; + status = "disabled"; + reg = <101>; + }; + + unittest0: test-unittest0 { + compatible = "unittest"; + status = "disabled"; + reg = <0>; + }; + + unittest1: test-unittest1 { + compatible = "unittest"; + status = "okay"; + reg = <1>; + }; + + unittest2: test-unittest2 { + compatible = "unittest"; + status = "disabled"; + reg = <2>; + }; + + unittest3: test-unittest3 { + compatible = "unittest"; + status = "okay"; + reg = <3>; + }; + + unittest5: test-unittest5 { + compatible = "unittest"; + status = "disabled"; + reg = <5>; + }; + + unittest6: test-unittest6 { + compatible = "unittest"; + status = "disabled"; + reg = <6>; + }; + + unittest7: test-unittest7 { + compatible = "unittest"; + status = "disabled"; + reg = <7>; + }; + + unittest8: test-unittest8 { + compatible = "unittest"; + status = "disabled"; + reg = <8>; + }; + + i2c-test-bus { + compatible = "unittest-i2c-bus"; + status = "okay"; + reg = <50>; + + #address-cells = <1>; + #size-cells = <0>; + + test-unittest12 { + reg = <8>; + compatible = "unittest-i2c-dev"; + status = "disabled"; + }; + + test-unittest13 { + reg = <9>; + compatible = "unittest-i2c-dev"; + status = "okay"; + }; + + test-unittest14 { + reg = <10>; + compatible = "unittest-i2c-mux"; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + test-mux-dev { + reg = <32>; + compatible = "unittest-i2c-dev"; + status = "okay"; + }; + }; + }; + }; + }; + }; + + /* test enable using absolute target path */ + overlay0 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus/test-unittest0"; + __overlay__ { + status = "okay"; + }; + }; + }; + + /* test disable using absolute target path */ + overlay1 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus/test-unittest1"; + __overlay__ { + status = "disabled"; + }; + }; + }; + + /* test enable using label */ + overlay2 { + fragment@0 { + target = <&unittest2>; + __overlay__ { + status = "okay"; + }; + }; + }; + + /* test disable using label */ + overlay3 { + fragment@0 { + target = <&unittest3>; + __overlay__ { + status = "disabled"; + }; + }; + }; + + /* test insertion of a full node */ + overlay4 { + fragment@0 { + target = <&unittestbus>; + __overlay__ { + + /* suppress DTC warning */ + #address-cells = <1>; + #size-cells = <0>; + + test-unittest4 { + compatible = "unittest"; + status = "okay"; + reg = <4>; + }; + }; + }; + }; + + /* test overlay apply revert */ + overlay5 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus/test-unittest5"; + __overlay__ { + status = "okay"; + }; + }; + }; + + /* test overlays application and removal in sequence */ + overlay6 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus/test-unittest6"; + __overlay__ { + status = "okay"; + }; + }; + }; + overlay7 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus/test-unittest7"; + __overlay__ { + status = "okay"; + }; + }; + }; + + /* test overlays application and removal in bad sequence */ + overlay8 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus/test-unittest8"; + __overlay__ { + status = "okay"; + }; + }; + }; + overlay9 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus/test-unittest8"; + __overlay__ { + property-foo = "bar"; + }; + }; + }; + + overlay10 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus"; + __overlay__ { + + /* suppress DTC warning */ + #address-cells = <1>; + #size-cells = <0>; + + test-unittest10 { + compatible = "unittest"; + status = "okay"; + reg = <10>; + + #address-cells = <1>; + #size-cells = <0>; + + test-unittest101 { + compatible = "unittest"; + status = "okay"; + reg = <1>; + }; + + }; + }; + }; + }; + + overlay11 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus"; + __overlay__ { + + /* suppress DTC warning */ + #address-cells = <1>; + #size-cells = <0>; + + test-unittest11 { + compatible = "unittest"; + status = "okay"; + reg = <11>; + + #address-cells = <1>; + #size-cells = <0>; + + test-unittest111 { + compatible = "unittest"; + status = "okay"; + reg = <1>; + }; + + }; + }; + }; + }; + + /* test enable using absolute target path (i2c) */ + overlay12 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12"; + __overlay__ { + status = "okay"; + }; + }; + }; + + /* test disable using absolute target path (i2c) */ + overlay13 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13"; + __overlay__ { + status = "disabled"; + }; + }; + }; + + /* test mux overlay */ + overlay15 { + fragment@0 { + target-path = "/testcase-data/overlay-node/test-bus/i2c-test-bus"; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + test-unittest15 { + reg = <11>; + compatible = "unittest-i2c-mux"; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + test-mux-dev { + reg = <32>; + compatible = "unittest-i2c-dev"; + status = "okay"; + }; + }; + }; + }; + }; + }; + + }; +}; diff --git a/drivers/of/unittest-data/tests-phandle.dtsi b/drivers/of/unittest-data/tests-phandle.dtsi new file mode 100644 index 000000000..5b1527e8a --- /dev/null +++ b/drivers/of/unittest-data/tests-phandle.dtsi @@ -0,0 +1,48 @@ + +/ { + aliases { + testcase-alias = &testcase; + }; + + testcase: testcase-data { + security-password = "password"; + duplicate-name = "duplicate"; + duplicate-name { }; + phandle-tests { + provider0: provider0 { + #phandle-cells = <0>; + }; + + provider1: provider1 { + #phandle-cells = <1>; + }; + + provider2: provider2 { + #phandle-cells = <2>; + }; + + provider3: provider3 { + #phandle-cells = <3>; + }; + + consumer-a { + phandle-list = <&provider1 1>, + <&provider2 2 0>, + <0>, + <&provider3 4 4 3>, + <&provider2 5 100>, + <&provider0>, + <&provider1 7>; + phandle-list-names = "first", "second", "third"; + + phandle-list-bad-phandle = <12345678 0 0>; + phandle-list-bad-args = <&provider2 1 0>, + <&provider3 0>; + empty-property; + string-property = "foobar"; + unterminated-string = [40 41 42 43]; + unterminated-string-list = "first", "second", [40 41 42 43]; + }; + }; + }; +}; diff --git a/drivers/of/unittest-data/tests-platform.dtsi b/drivers/of/unittest-data/tests-platform.dtsi new file mode 100644 index 000000000..eb20eeb2b --- /dev/null +++ b/drivers/of/unittest-data/tests-platform.dtsi @@ -0,0 +1,35 @@ + +/ { + testcase-data { + platform-tests { + #address-cells = <1>; + #size-cells = <0>; + + test-device@0 { + compatible = "test-device"; + reg = <0x0>; + + #address-cells = <1>; + #size-cells = <0>; + + dev@100 { + compatible = "test-sub-device"; + reg = <0x100>; + }; + }; + + test-device@1 { + compatible = "test-device"; + reg = <0x1>; + + #address-cells = <1>; + #size-cells = <0>; + + dev@100 { + compatible = "test-sub-device"; + reg = <0x100>; + }; + }; + }; + }; +}; diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c new file mode 100644 index 000000000..18016341d --- /dev/null +++ b/drivers/of/unittest.c @@ -0,0 +1,1970 @@ +/* + * Self tests for device tree subsystem + */ + +#define pr_fmt(fmt) "### dt-test ### " fmt + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/hashtable.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> + +#include <linux/i2c.h> +#include <linux/i2c-mux.h> + +#include <linux/bitops.h> + +#include "of_private.h" + +static struct unittest_results { + int passed; + int failed; +} unittest_results; + +#define unittest(result, fmt, ...) ({ \ + bool failed = !(result); \ + if (failed) { \ + unittest_results.failed++; \ + pr_err("FAIL %s():%i " fmt, __func__, __LINE__, ##__VA_ARGS__); \ + } else { \ + unittest_results.passed++; \ + pr_debug("pass %s():%i\n", __func__, __LINE__); \ + } \ + failed; \ +}) + +static void __init of_unittest_find_node_by_name(void) +{ + struct device_node *np; + const char *options; + + np = of_find_node_by_path("/testcase-data"); + unittest(np && !strcmp("/testcase-data", np->full_name), + "find /testcase-data failed\n"); + of_node_put(np); + + /* Test if trailing '/' works */ + np = of_find_node_by_path("/testcase-data/"); + unittest(!np, "trailing '/' on /testcase-data/ should fail\n"); + + np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); + unittest(np && !strcmp("/testcase-data/phandle-tests/consumer-a", np->full_name), + "find /testcase-data/phandle-tests/consumer-a failed\n"); + of_node_put(np); + + np = of_find_node_by_path("testcase-alias"); + unittest(np && !strcmp("/testcase-data", np->full_name), + "find testcase-alias failed\n"); + of_node_put(np); + + /* Test if trailing '/' works on aliases */ + np = of_find_node_by_path("testcase-alias/"); + unittest(!np, "trailing '/' on testcase-alias/ should fail\n"); + + np = of_find_node_by_path("testcase-alias/phandle-tests/consumer-a"); + unittest(np && !strcmp("/testcase-data/phandle-tests/consumer-a", np->full_name), + "find testcase-alias/phandle-tests/consumer-a failed\n"); + of_node_put(np); + + np = of_find_node_by_path("/testcase-data/missing-path"); + unittest(!np, "non-existent path returned node %s\n", np->full_name); + of_node_put(np); + + np = of_find_node_by_path("missing-alias"); + unittest(!np, "non-existent alias returned node %s\n", np->full_name); + of_node_put(np); + + np = of_find_node_by_path("testcase-alias/missing-path"); + unittest(!np, "non-existent alias with relative path returned node %s\n", np->full_name); + of_node_put(np); + + np = of_find_node_opts_by_path("/testcase-data:testoption", &options); + unittest(np && !strcmp("testoption", options), + "option path test failed\n"); + of_node_put(np); + + np = of_find_node_opts_by_path("/testcase-data:test/option", &options); + unittest(np && !strcmp("test/option", options), + "option path test, subcase #1 failed\n"); + of_node_put(np); + + np = of_find_node_opts_by_path("/testcase-data/testcase-device1:test/option", &options); + unittest(np && !strcmp("test/option", options), + "option path test, subcase #2 failed\n"); + of_node_put(np); + + np = of_find_node_opts_by_path("/testcase-data:testoption", NULL); + unittest(np, "NULL option path test failed\n"); + of_node_put(np); + + np = of_find_node_opts_by_path("testcase-alias:testaliasoption", + &options); + unittest(np && !strcmp("testaliasoption", options), + "option alias path test failed\n"); + of_node_put(np); + + np = of_find_node_opts_by_path("testcase-alias:test/alias/option", + &options); + unittest(np && !strcmp("test/alias/option", options), + "option alias path test, subcase #1 failed\n"); + of_node_put(np); + + np = of_find_node_opts_by_path("testcase-alias:testaliasoption", NULL); + unittest(np, "NULL option alias path test failed\n"); + of_node_put(np); + + options = "testoption"; + np = of_find_node_opts_by_path("testcase-alias", &options); + unittest(np && !options, "option clearing test failed\n"); + of_node_put(np); + + options = "testoption"; + np = of_find_node_opts_by_path("/", &options); + unittest(np && !options, "option clearing root node test failed\n"); + of_node_put(np); +} + +static void __init of_unittest_dynamic(void) +{ + struct device_node *np; + struct property *prop; + + np = of_find_node_by_path("/testcase-data"); + if (!np) { + pr_err("missing testcase data\n"); + return; + } + + /* Array of 4 properties for the purpose of testing */ + prop = kzalloc(sizeof(*prop) * 4, GFP_KERNEL); + if (!prop) { + unittest(0, "kzalloc() failed\n"); + return; + } + + /* Add a new property - should pass*/ + prop->name = "new-property"; + prop->value = "new-property-data"; + prop->length = strlen(prop->value); + unittest(of_add_property(np, prop) == 0, "Adding a new property failed\n"); + + /* Try to add an existing property - should fail */ + prop++; + prop->name = "new-property"; + prop->value = "new-property-data-should-fail"; + prop->length = strlen(prop->value); + unittest(of_add_property(np, prop) != 0, + "Adding an existing property should have failed\n"); + + /* Try to modify an existing property - should pass */ + prop->value = "modify-property-data-should-pass"; + prop->length = strlen(prop->value); + unittest(of_update_property(np, prop) == 0, + "Updating an existing property should have passed\n"); + + /* Try to modify non-existent property - should pass*/ + prop++; + prop->name = "modify-property"; + prop->value = "modify-missing-property-data-should-pass"; + prop->length = strlen(prop->value); + unittest(of_update_property(np, prop) == 0, + "Updating a missing property should have passed\n"); + + /* Remove property - should pass */ + unittest(of_remove_property(np, prop) == 0, + "Removing a property should have passed\n"); + + /* Adding very large property - should pass */ + prop++; + prop->name = "large-property-PAGE_SIZEx8"; + prop->length = PAGE_SIZE * 8; + prop->value = kzalloc(prop->length, GFP_KERNEL); + unittest(prop->value != NULL, "Unable to allocate large buffer\n"); + if (prop->value) + unittest(of_add_property(np, prop) == 0, + "Adding a large property should have passed\n"); +} + +static int __init of_unittest_check_node_linkage(struct device_node *np) +{ + struct device_node *child; + int count = 0, rc; + + for_each_child_of_node(np, child) { + if (child->parent != np) { + pr_err("Child node %s links to wrong parent %s\n", + child->name, np->name); + return -EINVAL; + } + + rc = of_unittest_check_node_linkage(child); + if (rc < 0) + return rc; + count += rc; + } + + return count + 1; +} + +static void __init of_unittest_check_tree_linkage(void) +{ + struct device_node *np; + int allnode_count = 0, child_count; + + if (!of_root) + return; + + for_each_of_allnodes(np) + allnode_count++; + child_count = of_unittest_check_node_linkage(of_root); + + unittest(child_count > 0, "Device node data structure is corrupted\n"); + unittest(child_count == allnode_count, + "allnodes list size (%i) doesn't match sibling lists size (%i)\n", + allnode_count, child_count); + pr_debug("allnodes list size (%i); sibling lists size (%i)\n", allnode_count, child_count); +} + +struct node_hash { + struct hlist_node node; + struct device_node *np; +}; + +static DEFINE_HASHTABLE(phandle_ht, 8); +static void __init of_unittest_check_phandles(void) +{ + struct device_node *np; + struct node_hash *nh; + struct hlist_node *tmp; + int i, dup_count = 0, phandle_count = 0; + + for_each_of_allnodes(np) { + if (!np->phandle) + continue; + + hash_for_each_possible(phandle_ht, nh, node, np->phandle) { + if (nh->np->phandle == np->phandle) { + pr_info("Duplicate phandle! %i used by %s and %s\n", + np->phandle, nh->np->full_name, np->full_name); + dup_count++; + break; + } + } + + nh = kzalloc(sizeof(*nh), GFP_KERNEL); + if (WARN_ON(!nh)) + return; + + nh->np = np; + hash_add(phandle_ht, &nh->node, np->phandle); + phandle_count++; + } + unittest(dup_count == 0, "Found %i duplicates in %i phandles\n", + dup_count, phandle_count); + + /* Clean up */ + hash_for_each_safe(phandle_ht, i, tmp, nh, node) { + hash_del(&nh->node); + kfree(nh); + } +} + +static void __init of_unittest_parse_phandle_with_args(void) +{ + struct device_node *np; + struct of_phandle_args args; + int i, rc; + + np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); + if (!np) { + pr_err("missing testcase data\n"); + return; + } + + rc = of_count_phandle_with_args(np, "phandle-list", "#phandle-cells"); + unittest(rc == 7, "of_count_phandle_with_args() returned %i, expected 7\n", rc); + + for (i = 0; i < 8; i++) { + bool passed = true; + + rc = of_parse_phandle_with_args(np, "phandle-list", + "#phandle-cells", i, &args); + + /* Test the values from tests-phandle.dtsi */ + switch (i) { + case 0: + passed &= !rc; + passed &= (args.args_count == 1); + passed &= (args.args[0] == (i + 1)); + break; + case 1: + passed &= !rc; + passed &= (args.args_count == 2); + passed &= (args.args[0] == (i + 1)); + passed &= (args.args[1] == 0); + break; + case 2: + passed &= (rc == -ENOENT); + break; + case 3: + passed &= !rc; + passed &= (args.args_count == 3); + passed &= (args.args[0] == (i + 1)); + passed &= (args.args[1] == 4); + passed &= (args.args[2] == 3); + break; + case 4: + passed &= !rc; + passed &= (args.args_count == 2); + passed &= (args.args[0] == (i + 1)); + passed &= (args.args[1] == 100); + break; + case 5: + passed &= !rc; + passed &= (args.args_count == 0); + break; + case 6: + passed &= !rc; + passed &= (args.args_count == 1); + passed &= (args.args[0] == (i + 1)); + break; + case 7: + passed &= (rc == -ENOENT); + break; + default: + passed = false; + } + + unittest(passed, "index %i - data error on node %s rc=%i\n", + i, args.np->full_name, rc); + } + + /* Check for missing list property */ + rc = of_parse_phandle_with_args(np, "phandle-list-missing", + "#phandle-cells", 0, &args); + unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc); + rc = of_count_phandle_with_args(np, "phandle-list-missing", + "#phandle-cells"); + unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc); + + /* Check for missing cells property */ + rc = of_parse_phandle_with_args(np, "phandle-list", + "#phandle-cells-missing", 0, &args); + unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); + rc = of_count_phandle_with_args(np, "phandle-list", + "#phandle-cells-missing"); + unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); + + /* Check for bad phandle in list */ + rc = of_parse_phandle_with_args(np, "phandle-list-bad-phandle", + "#phandle-cells", 0, &args); + unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); + rc = of_count_phandle_with_args(np, "phandle-list-bad-phandle", + "#phandle-cells"); + unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); + + /* Check for incorrectly formed argument list */ + rc = of_parse_phandle_with_args(np, "phandle-list-bad-args", + "#phandle-cells", 1, &args); + unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); + rc = of_count_phandle_with_args(np, "phandle-list-bad-args", + "#phandle-cells"); + unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); +} + +static void __init of_unittest_property_string(void) +{ + const char *strings[4]; + struct device_node *np; + int rc; + + np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); + if (!np) { + pr_err("No testcase data in device tree\n"); + return; + } + + rc = of_property_match_string(np, "phandle-list-names", "first"); + unittest(rc == 0, "first expected:0 got:%i\n", rc); + rc = of_property_match_string(np, "phandle-list-names", "second"); + unittest(rc == 1, "second expected:1 got:%i\n", rc); + rc = of_property_match_string(np, "phandle-list-names", "third"); + unittest(rc == 2, "third expected:2 got:%i\n", rc); + rc = of_property_match_string(np, "phandle-list-names", "fourth"); + unittest(rc == -ENODATA, "unmatched string; rc=%i\n", rc); + rc = of_property_match_string(np, "missing-property", "blah"); + unittest(rc == -EINVAL, "missing property; rc=%i\n", rc); + rc = of_property_match_string(np, "empty-property", "blah"); + unittest(rc == -ENODATA, "empty property; rc=%i\n", rc); + rc = of_property_match_string(np, "unterminated-string", "blah"); + unittest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); + + /* of_property_count_strings() tests */ + rc = of_property_count_strings(np, "string-property"); + unittest(rc == 1, "Incorrect string count; rc=%i\n", rc); + rc = of_property_count_strings(np, "phandle-list-names"); + unittest(rc == 3, "Incorrect string count; rc=%i\n", rc); + rc = of_property_count_strings(np, "unterminated-string"); + unittest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); + rc = of_property_count_strings(np, "unterminated-string-list"); + unittest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc); + + /* of_property_read_string_index() tests */ + rc = of_property_read_string_index(np, "string-property", 0, strings); + unittest(rc == 0 && !strcmp(strings[0], "foobar"), "of_property_read_string_index() failure; rc=%i\n", rc); + strings[0] = NULL; + rc = of_property_read_string_index(np, "string-property", 1, strings); + unittest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); + rc = of_property_read_string_index(np, "phandle-list-names", 0, strings); + unittest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc); + rc = of_property_read_string_index(np, "phandle-list-names", 1, strings); + unittest(rc == 0 && !strcmp(strings[0], "second"), "of_property_read_string_index() failure; rc=%i\n", rc); + rc = of_property_read_string_index(np, "phandle-list-names", 2, strings); + unittest(rc == 0 && !strcmp(strings[0], "third"), "of_property_read_string_index() failure; rc=%i\n", rc); + strings[0] = NULL; + rc = of_property_read_string_index(np, "phandle-list-names", 3, strings); + unittest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); + strings[0] = NULL; + rc = of_property_read_string_index(np, "unterminated-string", 0, strings); + unittest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); + rc = of_property_read_string_index(np, "unterminated-string-list", 0, strings); + unittest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc); + strings[0] = NULL; + rc = of_property_read_string_index(np, "unterminated-string-list", 2, strings); /* should fail */ + unittest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); + strings[1] = NULL; + + /* of_property_read_string_array() tests */ + rc = of_property_read_string_array(np, "string-property", strings, 4); + unittest(rc == 1, "Incorrect string count; rc=%i\n", rc); + rc = of_property_read_string_array(np, "phandle-list-names", strings, 4); + unittest(rc == 3, "Incorrect string count; rc=%i\n", rc); + rc = of_property_read_string_array(np, "unterminated-string", strings, 4); + unittest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); + /* -- An incorrectly formed string should cause a failure */ + rc = of_property_read_string_array(np, "unterminated-string-list", strings, 4); + unittest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc); + /* -- parsing the correctly formed strings should still work: */ + strings[2] = NULL; + rc = of_property_read_string_array(np, "unterminated-string-list", strings, 2); + unittest(rc == 2 && strings[2] == NULL, "of_property_read_string_array() failure; rc=%i\n", rc); + strings[1] = NULL; + rc = of_property_read_string_array(np, "phandle-list-names", strings, 1); + unittest(rc == 1 && strings[1] == NULL, "Overwrote end of string array; rc=%i, str='%s'\n", rc, strings[1]); +} + +#define propcmp(p1, p2) (((p1)->length == (p2)->length) && \ + (p1)->value && (p2)->value && \ + !memcmp((p1)->value, (p2)->value, (p1)->length) && \ + !strcmp((p1)->name, (p2)->name)) +static void __init of_unittest_property_copy(void) +{ +#ifdef CONFIG_OF_DYNAMIC + struct property p1 = { .name = "p1", .length = 0, .value = "" }; + struct property p2 = { .name = "p2", .length = 5, .value = "abcd" }; + struct property *new; + + new = __of_prop_dup(&p1, GFP_KERNEL); + unittest(new && propcmp(&p1, new), "empty property didn't copy correctly\n"); + kfree(new->value); + kfree(new->name); + kfree(new); + + new = __of_prop_dup(&p2, GFP_KERNEL); + unittest(new && propcmp(&p2, new), "non-empty property didn't copy correctly\n"); + kfree(new->value); + kfree(new->name); + kfree(new); +#endif +} + +static void __init of_unittest_changeset(void) +{ +#ifdef CONFIG_OF_DYNAMIC + struct property *ppadd, padd = { .name = "prop-add", .length = 0, .value = "" }; + struct property *ppupdate, pupdate = { .name = "prop-update", .length = 5, .value = "abcd" }; + struct property *ppremove; + struct device_node *n1, *n2, *n21, *nremove, *parent, *np; + struct of_changeset chgset; + + n1 = __of_node_dup(NULL, "/testcase-data/changeset/n1"); + unittest(n1, "testcase setup failure\n"); + n2 = __of_node_dup(NULL, "/testcase-data/changeset/n2"); + unittest(n2, "testcase setup failure\n"); + n21 = __of_node_dup(NULL, "%s/%s", "/testcase-data/changeset/n2", "n21"); + unittest(n21, "testcase setup failure %p\n", n21); + nremove = of_find_node_by_path("/testcase-data/changeset/node-remove"); + unittest(nremove, "testcase setup failure\n"); + ppadd = __of_prop_dup(&padd, GFP_KERNEL); + unittest(ppadd, "testcase setup failure\n"); + ppupdate = __of_prop_dup(&pupdate, GFP_KERNEL); + unittest(ppupdate, "testcase setup failure\n"); + parent = nremove->parent; + n1->parent = parent; + n2->parent = parent; + n21->parent = n2; + n2->child = n21; + ppremove = of_find_property(parent, "prop-remove", NULL); + unittest(ppremove, "failed to find removal prop"); + + of_changeset_init(&chgset); + unittest(!of_changeset_attach_node(&chgset, n1), "fail attach n1\n"); + unittest(!of_changeset_attach_node(&chgset, n2), "fail attach n2\n"); + unittest(!of_changeset_detach_node(&chgset, nremove), "fail remove node\n"); + unittest(!of_changeset_attach_node(&chgset, n21), "fail attach n21\n"); + unittest(!of_changeset_add_property(&chgset, parent, ppadd), "fail add prop\n"); + unittest(!of_changeset_update_property(&chgset, parent, ppupdate), "fail update prop\n"); + unittest(!of_changeset_remove_property(&chgset, parent, ppremove), "fail remove prop\n"); + mutex_lock(&of_mutex); + unittest(!of_changeset_apply(&chgset), "apply failed\n"); + mutex_unlock(&of_mutex); + + /* Make sure node names are constructed correctly */ + unittest((np = of_find_node_by_path("/testcase-data/changeset/n2/n21")), + "'%s' not added\n", n21->full_name); + of_node_put(np); + + mutex_lock(&of_mutex); + unittest(!of_changeset_revert(&chgset), "revert failed\n"); + mutex_unlock(&of_mutex); + + of_changeset_destroy(&chgset); +#endif +} + +static void __init of_unittest_parse_interrupts(void) +{ + struct device_node *np; + struct of_phandle_args args; + int i, rc; + + np = of_find_node_by_path("/testcase-data/interrupts/interrupts0"); + if (!np) { + pr_err("missing testcase data\n"); + return; + } + + for (i = 0; i < 4; i++) { + bool passed = true; + + args.args_count = 0; + rc = of_irq_parse_one(np, i, &args); + + passed &= !rc; + passed &= (args.args_count == 1); + passed &= (args.args[0] == (i + 1)); + + unittest(passed, "index %i - data error on node %s rc=%i\n", + i, args.np->full_name, rc); + } + of_node_put(np); + + np = of_find_node_by_path("/testcase-data/interrupts/interrupts1"); + if (!np) { + pr_err("missing testcase data\n"); + return; + } + + for (i = 0; i < 4; i++) { + bool passed = true; + + args.args_count = 0; + rc = of_irq_parse_one(np, i, &args); + + /* Test the values from tests-phandle.dtsi */ + switch (i) { + case 0: + passed &= !rc; + passed &= (args.args_count == 1); + passed &= (args.args[0] == 9); + break; + case 1: + passed &= !rc; + passed &= (args.args_count == 3); + passed &= (args.args[0] == 10); + passed &= (args.args[1] == 11); + passed &= (args.args[2] == 12); + break; + case 2: + passed &= !rc; + passed &= (args.args_count == 2); + passed &= (args.args[0] == 13); + passed &= (args.args[1] == 14); + break; + case 3: + passed &= !rc; + passed &= (args.args_count == 2); + passed &= (args.args[0] == 15); + passed &= (args.args[1] == 16); + break; + default: + passed = false; + } + unittest(passed, "index %i - data error on node %s rc=%i\n", + i, args.np->full_name, rc); + } + of_node_put(np); +} + +static void __init of_unittest_parse_interrupts_extended(void) +{ + struct device_node *np; + struct of_phandle_args args; + int i, rc; + + np = of_find_node_by_path("/testcase-data/interrupts/interrupts-extended0"); + if (!np) { + pr_err("missing testcase data\n"); + return; + } + + for (i = 0; i < 7; i++) { + bool passed = true; + + rc = of_irq_parse_one(np, i, &args); + + /* Test the values from tests-phandle.dtsi */ + switch (i) { + case 0: + passed &= !rc; + passed &= (args.args_count == 1); + passed &= (args.args[0] == 1); + break; + case 1: + passed &= !rc; + passed &= (args.args_count == 3); + passed &= (args.args[0] == 2); + passed &= (args.args[1] == 3); + passed &= (args.args[2] == 4); + break; + case 2: + passed &= !rc; + passed &= (args.args_count == 2); + passed &= (args.args[0] == 5); + passed &= (args.args[1] == 6); + break; + case 3: + passed &= !rc; + passed &= (args.args_count == 1); + passed &= (args.args[0] == 9); + break; + case 4: + passed &= !rc; + passed &= (args.args_count == 3); + passed &= (args.args[0] == 10); + passed &= (args.args[1] == 11); + passed &= (args.args[2] == 12); + break; + case 5: + passed &= !rc; + passed &= (args.args_count == 2); + passed &= (args.args[0] == 13); + passed &= (args.args[1] == 14); + break; + case 6: + passed &= !rc; + passed &= (args.args_count == 1); + passed &= (args.args[0] == 15); + break; + default: + passed = false; + } + + unittest(passed, "index %i - data error on node %s rc=%i\n", + i, args.np->full_name, rc); + } + of_node_put(np); +} + +static const struct of_device_id match_node_table[] = { + { .data = "A", .name = "name0", }, /* Name alone is lowest priority */ + { .data = "B", .type = "type1", }, /* followed by type alone */ + + { .data = "Ca", .name = "name2", .type = "type1", }, /* followed by both together */ + { .data = "Cb", .name = "name2", }, /* Only match when type doesn't match */ + { .data = "Cc", .name = "name2", .type = "type2", }, + + { .data = "E", .compatible = "compat3" }, + { .data = "G", .compatible = "compat2", }, + { .data = "H", .compatible = "compat2", .name = "name5", }, + { .data = "I", .compatible = "compat2", .type = "type1", }, + { .data = "J", .compatible = "compat2", .type = "type1", .name = "name8", }, + { .data = "K", .compatible = "compat2", .name = "name9", }, + {} +}; + +static struct { + const char *path; + const char *data; +} match_node_tests[] = { + { .path = "/testcase-data/match-node/name0", .data = "A", }, + { .path = "/testcase-data/match-node/name1", .data = "B", }, + { .path = "/testcase-data/match-node/a/name2", .data = "Ca", }, + { .path = "/testcase-data/match-node/b/name2", .data = "Cb", }, + { .path = "/testcase-data/match-node/c/name2", .data = "Cc", }, + { .path = "/testcase-data/match-node/name3", .data = "E", }, + { .path = "/testcase-data/match-node/name4", .data = "G", }, + { .path = "/testcase-data/match-node/name5", .data = "H", }, + { .path = "/testcase-data/match-node/name6", .data = "G", }, + { .path = "/testcase-data/match-node/name7", .data = "I", }, + { .path = "/testcase-data/match-node/name8", .data = "J", }, + { .path = "/testcase-data/match-node/name9", .data = "K", }, +}; + +static void __init of_unittest_match_node(void) +{ + struct device_node *np; + const struct of_device_id *match; + int i; + + for (i = 0; i < ARRAY_SIZE(match_node_tests); i++) { + np = of_find_node_by_path(match_node_tests[i].path); + if (!np) { + unittest(0, "missing testcase node %s\n", + match_node_tests[i].path); + continue; + } + + match = of_match_node(match_node_table, np); + if (!match) { + unittest(0, "%s didn't match anything\n", + match_node_tests[i].path); + continue; + } + + if (strcmp(match->data, match_node_tests[i].data) != 0) { + unittest(0, "%s got wrong match. expected %s, got %s\n", + match_node_tests[i].path, match_node_tests[i].data, + (const char *)match->data); + continue; + } + unittest(1, "passed"); + } +} + +static const struct platform_device_info test_bus_info = { + .name = "unittest-bus", +}; +static void __init of_unittest_platform_populate(void) +{ + int irq, rc; + struct device_node *np, *child, *grandchild; + struct platform_device *pdev, *test_bus; + const struct of_device_id match[] = { + { .compatible = "test-device", }, + {} + }; + + np = of_find_node_by_path("/testcase-data"); + of_platform_populate(np, of_default_bus_match_table, NULL, NULL); + + /* Test that a missing irq domain returns -EPROBE_DEFER */ + np = of_find_node_by_path("/testcase-data/testcase-device1"); + pdev = of_find_device_by_node(np); + unittest(pdev, "device 1 creation failed\n"); + + irq = platform_get_irq(pdev, 0); + unittest(irq == -EPROBE_DEFER, "device deferred probe failed - %d\n", irq); + + /* Test that a parsing failure does not return -EPROBE_DEFER */ + np = of_find_node_by_path("/testcase-data/testcase-device2"); + pdev = of_find_device_by_node(np); + unittest(pdev, "device 2 creation failed\n"); + irq = platform_get_irq(pdev, 0); + unittest(irq < 0 && irq != -EPROBE_DEFER, "device parsing error failed - %d\n", irq); + + np = of_find_node_by_path("/testcase-data/platform-tests"); + unittest(np, "No testcase data in device tree\n"); + if (!np) + return; + + test_bus = platform_device_register_full(&test_bus_info); + rc = PTR_ERR_OR_ZERO(test_bus); + unittest(!rc, "testbus registration failed; rc=%i\n", rc); + if (rc) + return; + test_bus->dev.of_node = np; + + of_platform_populate(np, match, NULL, &test_bus->dev); + for_each_child_of_node(np, child) { + for_each_child_of_node(child, grandchild) + unittest(of_find_device_by_node(grandchild), + "Could not create device for node '%s'\n", + grandchild->name); + } + + of_platform_depopulate(&test_bus->dev); + for_each_child_of_node(np, child) { + for_each_child_of_node(child, grandchild) + unittest(!of_find_device_by_node(grandchild), + "device didn't get destroyed '%s'\n", + grandchild->name); + } + + platform_device_unregister(test_bus); + of_node_put(np); +} + +/** + * update_node_properties - adds the properties + * of np into dup node (present in live tree) and + * updates parent of children of np to dup. + * + * @np: node already present in live tree + * @dup: node present in live tree to be updated + */ +static void update_node_properties(struct device_node *np, + struct device_node *dup) +{ + struct property *prop; + struct device_node *child; + + for_each_property_of_node(np, prop) + of_add_property(dup, prop); + + for_each_child_of_node(np, child) + child->parent = dup; +} + +/** + * attach_node_and_children - attaches nodes + * and its children to live tree + * + * @np: Node to attach to live tree + */ +static int attach_node_and_children(struct device_node *np) +{ + struct device_node *next, *dup, *child; + unsigned long flags; + + dup = of_find_node_by_path(np->full_name); + if (dup) { + update_node_properties(np, dup); + return 0; + } + + child = np->child; + np->child = NULL; + + mutex_lock(&of_mutex); + raw_spin_lock_irqsave(&devtree_lock, flags); + np->sibling = np->parent->child; + np->parent->child = np; + of_node_clear_flag(np, OF_DETACHED); + raw_spin_unlock_irqrestore(&devtree_lock, flags); + + __of_attach_node_sysfs(np); + mutex_unlock(&of_mutex); + + while (child) { + next = child->sibling; + attach_node_and_children(child); + child = next; + } + + return 0; +} + +/** + * unittest_data_add - Reads, copies data from + * linked tree and attaches it to the live tree + */ +static int __init unittest_data_add(void) +{ + void *unittest_data; + struct device_node *unittest_data_node, *np; + /* + * __dtb_testcases_begin[] and __dtb_testcases_end[] are magically + * created by cmd_dt_S_dtb in scripts/Makefile.lib + */ + extern uint8_t __dtb_testcases_begin[]; + extern uint8_t __dtb_testcases_end[]; + const int size = __dtb_testcases_end - __dtb_testcases_begin; + int rc; + + if (!size) { + pr_warn("%s: No testcase data to attach; not running tests\n", + __func__); + return -ENODATA; + } + + /* creating copy */ + unittest_data = kmemdup(__dtb_testcases_begin, size, GFP_KERNEL); + + if (!unittest_data) { + pr_warn("%s: Failed to allocate memory for unittest_data; " + "not running tests\n", __func__); + return -ENOMEM; + } + of_fdt_unflatten_tree(unittest_data, &unittest_data_node); + if (!unittest_data_node) { + pr_warn("%s: No tree to attach; not running tests\n", __func__); + return -ENODATA; + } + of_node_set_flag(unittest_data_node, OF_DETACHED); + rc = of_resolve_phandles(unittest_data_node); + if (rc) { + pr_err("%s: Failed to resolve phandles (rc=%i)\n", __func__, rc); + return -EINVAL; + } + + if (!of_root) { + of_root = unittest_data_node; + for_each_of_allnodes(np) + __of_attach_node_sysfs(np); + of_aliases = of_find_node_by_path("/aliases"); + of_chosen = of_find_node_by_path("/chosen"); + return 0; + } + + /* attach the sub-tree to live tree */ + np = unittest_data_node->child; + while (np) { + struct device_node *next = np->sibling; + + np->parent = of_root; + attach_node_and_children(np); + np = next; + } + return 0; +} + +#ifdef CONFIG_OF_OVERLAY + +static int unittest_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + + if (np == NULL) { + dev_err(dev, "No OF data for device\n"); + return -EINVAL; + + } + + dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name); + + of_platform_populate(np, NULL, NULL, &pdev->dev); + + return 0; +} + +static int unittest_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + + dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name); + return 0; +} + +static const struct of_device_id unittest_match[] = { + { .compatible = "unittest", }, + {}, +}; + +static struct platform_driver unittest_driver = { + .probe = unittest_probe, + .remove = unittest_remove, + .driver = { + .name = "unittest", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(unittest_match), + }, +}; + +/* get the platform device instantiated at the path */ +static struct platform_device *of_path_to_platform_device(const char *path) +{ + struct device_node *np; + struct platform_device *pdev; + + np = of_find_node_by_path(path); + if (np == NULL) + return NULL; + + pdev = of_find_device_by_node(np); + of_node_put(np); + + return pdev; +} + +/* find out if a platform device exists at that path */ +static int of_path_platform_device_exists(const char *path) +{ + struct platform_device *pdev; + + pdev = of_path_to_platform_device(path); + platform_device_put(pdev); + return pdev != NULL; +} + +#if IS_BUILTIN(CONFIG_I2C) + +/* get the i2c client device instantiated at the path */ +static struct i2c_client *of_path_to_i2c_client(const char *path) +{ + struct device_node *np; + struct i2c_client *client; + + np = of_find_node_by_path(path); + if (np == NULL) + return NULL; + + client = of_find_i2c_device_by_node(np); + of_node_put(np); + + return client; +} + +/* find out if a i2c client device exists at that path */ +static int of_path_i2c_client_exists(const char *path) +{ + struct i2c_client *client; + + client = of_path_to_i2c_client(path); + if (client) + put_device(&client->dev); + return client != NULL; +} +#else +static int of_path_i2c_client_exists(const char *path) +{ + return 0; +} +#endif + +enum overlay_type { + PDEV_OVERLAY, + I2C_OVERLAY +}; + +static int of_path_device_type_exists(const char *path, + enum overlay_type ovtype) +{ + switch (ovtype) { + case PDEV_OVERLAY: + return of_path_platform_device_exists(path); + case I2C_OVERLAY: + return of_path_i2c_client_exists(path); + } + return 0; +} + +static const char *unittest_path(int nr, enum overlay_type ovtype) +{ + const char *base; + static char buf[256]; + + switch (ovtype) { + case PDEV_OVERLAY: + base = "/testcase-data/overlay-node/test-bus"; + break; + case I2C_OVERLAY: + base = "/testcase-data/overlay-node/test-bus/i2c-test-bus"; + break; + default: + buf[0] = '\0'; + return buf; + } + snprintf(buf, sizeof(buf) - 1, "%s/test-unittest%d", base, nr); + buf[sizeof(buf) - 1] = '\0'; + return buf; +} + +static int of_unittest_device_exists(int unittest_nr, enum overlay_type ovtype) +{ + const char *path; + + path = unittest_path(unittest_nr, ovtype); + + switch (ovtype) { + case PDEV_OVERLAY: + return of_path_platform_device_exists(path); + case I2C_OVERLAY: + return of_path_i2c_client_exists(path); + } + return 0; +} + +static const char *overlay_path(int nr) +{ + static char buf[256]; + + snprintf(buf, sizeof(buf) - 1, + "/testcase-data/overlay%d", nr); + buf[sizeof(buf) - 1] = '\0'; + + return buf; +} + +static const char *bus_path = "/testcase-data/overlay-node/test-bus"; + +/* it is guaranteed that overlay ids are assigned in sequence */ +#define MAX_UNITTEST_OVERLAYS 256 +static unsigned long overlay_id_bits[BITS_TO_LONGS(MAX_UNITTEST_OVERLAYS)]; +static int overlay_first_id = -1; + +static void of_unittest_track_overlay(int id) +{ + if (overlay_first_id < 0) + overlay_first_id = id; + id -= overlay_first_id; + + /* we shouldn't need that many */ + BUG_ON(id >= MAX_UNITTEST_OVERLAYS); + overlay_id_bits[BIT_WORD(id)] |= BIT_MASK(id); +} + +static void of_unittest_untrack_overlay(int id) +{ + if (overlay_first_id < 0) + return; + id -= overlay_first_id; + BUG_ON(id >= MAX_UNITTEST_OVERLAYS); + overlay_id_bits[BIT_WORD(id)] &= ~BIT_MASK(id); +} + +static void of_unittest_destroy_tracked_overlays(void) +{ + int id, ret, defers; + + if (overlay_first_id < 0) + return; + + /* try until no defers */ + do { + defers = 0; + /* remove in reverse order */ + for (id = MAX_UNITTEST_OVERLAYS - 1; id >= 0; id--) { + if (!(overlay_id_bits[BIT_WORD(id)] & BIT_MASK(id))) + continue; + + ret = of_overlay_destroy(id + overlay_first_id); + if (ret != 0) { + defers++; + pr_warn("%s: overlay destroy failed for #%d\n", + __func__, id + overlay_first_id); + continue; + } + + overlay_id_bits[BIT_WORD(id)] &= ~BIT_MASK(id); + } + } while (defers > 0); +} + +static int of_unittest_apply_overlay(int unittest_nr, int overlay_nr, + int *overlay_id) +{ + struct device_node *np = NULL; + int ret, id = -1; + + np = of_find_node_by_path(overlay_path(overlay_nr)); + if (np == NULL) { + unittest(0, "could not find overlay node @\"%s\"\n", + overlay_path(overlay_nr)); + ret = -EINVAL; + goto out; + } + + ret = of_overlay_create(np); + if (ret < 0) { + unittest(0, "could not create overlay from \"%s\"\n", + overlay_path(overlay_nr)); + goto out; + } + id = ret; + of_unittest_track_overlay(id); + + ret = 0; + +out: + of_node_put(np); + + if (overlay_id) + *overlay_id = id; + + return ret; +} + +/* apply an overlay while checking before and after states */ +static int of_unittest_apply_overlay_check(int overlay_nr, int unittest_nr, + int before, int after, enum overlay_type ovtype) +{ + int ret; + + /* unittest device must not be in before state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !before ? "enabled" : "disabled"); + return -EINVAL; + } + + ret = of_unittest_apply_overlay(overlay_nr, unittest_nr, NULL); + if (ret != 0) { + /* of_unittest_apply_overlay already called unittest() */ + return ret; + } + + /* unittest device must be to set to after state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != after) { + unittest(0, "overlay @\"%s\" failed to create @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !after ? "enabled" : "disabled"); + return -EINVAL; + } + + return 0; +} + +/* apply an overlay and then revert it while checking before, after states */ +static int of_unittest_apply_revert_overlay_check(int overlay_nr, + int unittest_nr, int before, int after, + enum overlay_type ovtype) +{ + int ret, ov_id; + + /* unittest device must be in before state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !before ? "enabled" : "disabled"); + return -EINVAL; + } + + /* apply the overlay */ + ret = of_unittest_apply_overlay(overlay_nr, unittest_nr, &ov_id); + if (ret != 0) { + /* of_unittest_apply_overlay already called unittest() */ + return ret; + } + + /* unittest device must be in after state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != after) { + unittest(0, "overlay @\"%s\" failed to create @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !after ? "enabled" : "disabled"); + return -EINVAL; + } + + ret = of_overlay_destroy(ov_id); + if (ret != 0) { + unittest(0, "overlay @\"%s\" failed to be destroyed @\"%s\"\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype)); + return ret; + } + + /* unittest device must be again in before state */ + if (of_unittest_device_exists(unittest_nr, PDEV_OVERLAY) != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !before ? "enabled" : "disabled"); + return -EINVAL; + } + + return 0; +} + +/* test activation of device */ +static void of_unittest_overlay_0(void) +{ + int ret; + + /* device should enable */ + ret = of_unittest_apply_overlay_check(0, 0, 0, 1, PDEV_OVERLAY); + if (ret != 0) + return; + + unittest(1, "overlay test %d passed\n", 0); +} + +/* test deactivation of device */ +static void of_unittest_overlay_1(void) +{ + int ret; + + /* device should disable */ + ret = of_unittest_apply_overlay_check(1, 1, 1, 0, PDEV_OVERLAY); + if (ret != 0) + return; + + unittest(1, "overlay test %d passed\n", 1); +} + +/* test activation of device */ +static void of_unittest_overlay_2(void) +{ + int ret; + + /* device should enable */ + ret = of_unittest_apply_overlay_check(2, 2, 0, 1, PDEV_OVERLAY); + if (ret != 0) + return; + + unittest(1, "overlay test %d passed\n", 2); +} + +/* test deactivation of device */ +static void of_unittest_overlay_3(void) +{ + int ret; + + /* device should disable */ + ret = of_unittest_apply_overlay_check(3, 3, 1, 0, PDEV_OVERLAY); + if (ret != 0) + return; + + unittest(1, "overlay test %d passed\n", 3); +} + +/* test activation of a full device node */ +static void of_unittest_overlay_4(void) +{ + int ret; + + /* device should disable */ + ret = of_unittest_apply_overlay_check(4, 4, 0, 1, PDEV_OVERLAY); + if (ret != 0) + return; + + unittest(1, "overlay test %d passed\n", 4); +} + +/* test overlay apply/revert sequence */ +static void of_unittest_overlay_5(void) +{ + int ret; + + /* device should disable */ + ret = of_unittest_apply_revert_overlay_check(5, 5, 0, 1, PDEV_OVERLAY); + if (ret != 0) + return; + + unittest(1, "overlay test %d passed\n", 5); +} + +/* test overlay application in sequence */ +static void of_unittest_overlay_6(void) +{ + struct device_node *np; + int ret, i, ov_id[2]; + int overlay_nr = 6, unittest_nr = 6; + int before = 0, after = 1; + + /* unittest device must be in before state */ + for (i = 0; i < 2; i++) { + if (of_unittest_device_exists(unittest_nr + i, PDEV_OVERLAY) + != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr + i), + unittest_path(unittest_nr + i, + PDEV_OVERLAY), + !before ? "enabled" : "disabled"); + return; + } + } + + /* apply the overlays */ + for (i = 0; i < 2; i++) { + + np = of_find_node_by_path(overlay_path(overlay_nr + i)); + if (np == NULL) { + unittest(0, "could not find overlay node @\"%s\"\n", + overlay_path(overlay_nr + i)); + return; + } + + ret = of_overlay_create(np); + if (ret < 0) { + unittest(0, "could not create overlay from \"%s\"\n", + overlay_path(overlay_nr + i)); + return; + } + ov_id[i] = ret; + of_unittest_track_overlay(ov_id[i]); + } + + for (i = 0; i < 2; i++) { + /* unittest device must be in after state */ + if (of_unittest_device_exists(unittest_nr + i, PDEV_OVERLAY) + != after) { + unittest(0, "overlay @\"%s\" failed @\"%s\" %s\n", + overlay_path(overlay_nr + i), + unittest_path(unittest_nr + i, + PDEV_OVERLAY), + !after ? "enabled" : "disabled"); + return; + } + } + + for (i = 1; i >= 0; i--) { + ret = of_overlay_destroy(ov_id[i]); + if (ret != 0) { + unittest(0, "overlay @\"%s\" failed destroy @\"%s\"\n", + overlay_path(overlay_nr + i), + unittest_path(unittest_nr + i, + PDEV_OVERLAY)); + return; + } + of_unittest_untrack_overlay(ov_id[i]); + } + + for (i = 0; i < 2; i++) { + /* unittest device must be again in before state */ + if (of_unittest_device_exists(unittest_nr + i, PDEV_OVERLAY) + != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr + i), + unittest_path(unittest_nr + i, + PDEV_OVERLAY), + !before ? "enabled" : "disabled"); + return; + } + } + + unittest(1, "overlay test %d passed\n", 6); +} + +/* test overlay application in sequence */ +static void of_unittest_overlay_8(void) +{ + struct device_node *np; + int ret, i, ov_id[2]; + int overlay_nr = 8, unittest_nr = 8; + + /* we don't care about device state in this test */ + + /* apply the overlays */ + for (i = 0; i < 2; i++) { + + np = of_find_node_by_path(overlay_path(overlay_nr + i)); + if (np == NULL) { + unittest(0, "could not find overlay node @\"%s\"\n", + overlay_path(overlay_nr + i)); + return; + } + + ret = of_overlay_create(np); + if (ret < 0) { + unittest(0, "could not create overlay from \"%s\"\n", + overlay_path(overlay_nr + i)); + return; + } + ov_id[i] = ret; + of_unittest_track_overlay(ov_id[i]); + } + + /* now try to remove first overlay (it should fail) */ + ret = of_overlay_destroy(ov_id[0]); + if (ret == 0) { + unittest(0, "overlay @\"%s\" was destroyed @\"%s\"\n", + overlay_path(overlay_nr + 0), + unittest_path(unittest_nr, + PDEV_OVERLAY)); + return; + } + + /* removing them in order should work */ + for (i = 1; i >= 0; i--) { + ret = of_overlay_destroy(ov_id[i]); + if (ret != 0) { + unittest(0, "overlay @\"%s\" not destroyed @\"%s\"\n", + overlay_path(overlay_nr + i), + unittest_path(unittest_nr, + PDEV_OVERLAY)); + return; + } + of_unittest_untrack_overlay(ov_id[i]); + } + + unittest(1, "overlay test %d passed\n", 8); +} + +/* test insertion of a bus with parent devices */ +static void of_unittest_overlay_10(void) +{ + int ret; + char *child_path; + + /* device should disable */ + ret = of_unittest_apply_overlay_check(10, 10, 0, 1, PDEV_OVERLAY); + if (unittest(ret == 0, + "overlay test %d failed; overlay application\n", 10)) + return; + + child_path = kasprintf(GFP_KERNEL, "%s/test-unittest101", + unittest_path(10, PDEV_OVERLAY)); + if (unittest(child_path, "overlay test %d failed; kasprintf\n", 10)) + return; + + ret = of_path_device_type_exists(child_path, PDEV_OVERLAY); + kfree(child_path); + if (unittest(ret, "overlay test %d failed; no child device\n", 10)) + return; +} + +/* test insertion of a bus with parent devices (and revert) */ +static void of_unittest_overlay_11(void) +{ + int ret; + + /* device should disable */ + ret = of_unittest_apply_revert_overlay_check(11, 11, 0, 1, + PDEV_OVERLAY); + if (unittest(ret == 0, + "overlay test %d failed; overlay application\n", 11)) + return; +} + +#if IS_BUILTIN(CONFIG_I2C) && IS_ENABLED(CONFIG_OF_OVERLAY) + +struct unittest_i2c_bus_data { + struct platform_device *pdev; + struct i2c_adapter adap; +}; + +static int unittest_i2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct unittest_i2c_bus_data *std = i2c_get_adapdata(adap); + + (void)std; + + return num; +} + +static u32 unittest_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm unittest_i2c_algo = { + .master_xfer = unittest_i2c_master_xfer, + .functionality = unittest_i2c_functionality, +}; + +static int unittest_i2c_bus_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct unittest_i2c_bus_data *std; + struct i2c_adapter *adap; + int ret; + + if (np == NULL) { + dev_err(dev, "No OF data for device\n"); + return -EINVAL; + + } + + dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name); + + std = devm_kzalloc(dev, sizeof(*std), GFP_KERNEL); + if (!std) { + dev_err(dev, "Failed to allocate unittest i2c data\n"); + return -ENOMEM; + } + + /* link them together */ + std->pdev = pdev; + platform_set_drvdata(pdev, std); + + adap = &std->adap; + i2c_set_adapdata(adap, std); + adap->nr = -1; + strlcpy(adap->name, pdev->name, sizeof(adap->name)); + adap->class = I2C_CLASS_DEPRECATED; + adap->algo = &unittest_i2c_algo; + adap->dev.parent = dev; + adap->dev.of_node = dev->of_node; + adap->timeout = 5 * HZ; + adap->retries = 3; + + ret = i2c_add_numbered_adapter(adap); + if (ret != 0) { + dev_err(dev, "Failed to add I2C adapter\n"); + return ret; + } + + return 0; +} + +static int unittest_i2c_bus_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct unittest_i2c_bus_data *std = platform_get_drvdata(pdev); + + dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name); + i2c_del_adapter(&std->adap); + + return 0; +} + +static const struct of_device_id unittest_i2c_bus_match[] = { + { .compatible = "unittest-i2c-bus", }, + {}, +}; + +static struct platform_driver unittest_i2c_bus_driver = { + .probe = unittest_i2c_bus_probe, + .remove = unittest_i2c_bus_remove, + .driver = { + .name = "unittest-i2c-bus", + .of_match_table = of_match_ptr(unittest_i2c_bus_match), + }, +}; + +static int unittest_i2c_dev_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device_node *np = client->dev.of_node; + + if (!np) { + dev_err(dev, "No OF node\n"); + return -EINVAL; + } + + dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name); + + return 0; +}; + +static int unittest_i2c_dev_remove(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device_node *np = client->dev.of_node; + + dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name); + return 0; +} + +static const struct i2c_device_id unittest_i2c_dev_id[] = { + { .name = "unittest-i2c-dev" }, + { } +}; + +static struct i2c_driver unittest_i2c_dev_driver = { + .driver = { + .name = "unittest-i2c-dev", + .owner = THIS_MODULE, + }, + .probe = unittest_i2c_dev_probe, + .remove = unittest_i2c_dev_remove, + .id_table = unittest_i2c_dev_id, +}; + +#if IS_BUILTIN(CONFIG_I2C_MUX) + +struct unittest_i2c_mux_data { + int nchans; + struct i2c_adapter *adap[]; +}; + +static int unittest_i2c_mux_select_chan(struct i2c_adapter *adap, + void *client, u32 chan) +{ + return 0; +} + +static int unittest_i2c_mux_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret, i, nchans, size; + struct device *dev = &client->dev; + struct i2c_adapter *adap = to_i2c_adapter(dev->parent); + struct device_node *np = client->dev.of_node, *child; + struct unittest_i2c_mux_data *stm; + u32 reg, max_reg; + + dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name); + + if (!np) { + dev_err(dev, "No OF node\n"); + return -EINVAL; + } + + max_reg = (u32)-1; + for_each_child_of_node(np, child) { + ret = of_property_read_u32(child, "reg", ®); + if (ret) + continue; + if (max_reg == (u32)-1 || reg > max_reg) + max_reg = reg; + } + nchans = max_reg == (u32)-1 ? 0 : max_reg + 1; + if (nchans == 0) { + dev_err(dev, "No channels\n"); + return -EINVAL; + } + + size = offsetof(struct unittest_i2c_mux_data, adap[nchans]); + stm = devm_kzalloc(dev, size, GFP_KERNEL); + if (!stm) { + dev_err(dev, "Out of memory\n"); + return -ENOMEM; + } + stm->nchans = nchans; + for (i = 0; i < nchans; i++) { + stm->adap[i] = i2c_add_mux_adapter(adap, dev, client, + 0, i, 0, unittest_i2c_mux_select_chan, NULL); + if (!stm->adap[i]) { + dev_err(dev, "Failed to register mux #%d\n", i); + for (i--; i >= 0; i--) + i2c_del_mux_adapter(stm->adap[i]); + return -ENODEV; + } + } + + i2c_set_clientdata(client, stm); + + return 0; +}; + +static int unittest_i2c_mux_remove(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device_node *np = client->dev.of_node; + struct unittest_i2c_mux_data *stm = i2c_get_clientdata(client); + int i; + + dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name); + for (i = stm->nchans - 1; i >= 0; i--) + i2c_del_mux_adapter(stm->adap[i]); + return 0; +} + +static const struct i2c_device_id unittest_i2c_mux_id[] = { + { .name = "unittest-i2c-mux" }, + { } +}; + +static struct i2c_driver unittest_i2c_mux_driver = { + .driver = { + .name = "unittest-i2c-mux", + .owner = THIS_MODULE, + }, + .probe = unittest_i2c_mux_probe, + .remove = unittest_i2c_mux_remove, + .id_table = unittest_i2c_mux_id, +}; + +#endif + +static int of_unittest_overlay_i2c_init(void) +{ + int ret; + + ret = i2c_add_driver(&unittest_i2c_dev_driver); + if (unittest(ret == 0, + "could not register unittest i2c device driver\n")) + return ret; + + ret = platform_driver_register(&unittest_i2c_bus_driver); + if (unittest(ret == 0, + "could not register unittest i2c bus driver\n")) + return ret; + +#if IS_BUILTIN(CONFIG_I2C_MUX) + ret = i2c_add_driver(&unittest_i2c_mux_driver); + if (unittest(ret == 0, + "could not register unittest i2c mux driver\n")) + return ret; +#endif + + return 0; +} + +static void of_unittest_overlay_i2c_cleanup(void) +{ +#if IS_BUILTIN(CONFIG_I2C_MUX) + i2c_del_driver(&unittest_i2c_mux_driver); +#endif + platform_driver_unregister(&unittest_i2c_bus_driver); + i2c_del_driver(&unittest_i2c_dev_driver); +} + +static void of_unittest_overlay_i2c_12(void) +{ + int ret; + + /* device should enable */ + ret = of_unittest_apply_overlay_check(12, 12, 0, 1, I2C_OVERLAY); + if (ret != 0) + return; + + unittest(1, "overlay test %d passed\n", 12); +} + +/* test deactivation of device */ +static void of_unittest_overlay_i2c_13(void) +{ + int ret; + + /* device should disable */ + ret = of_unittest_apply_overlay_check(13, 13, 1, 0, I2C_OVERLAY); + if (ret != 0) + return; + + unittest(1, "overlay test %d passed\n", 13); +} + +/* just check for i2c mux existence */ +static void of_unittest_overlay_i2c_14(void) +{ +} + +static void of_unittest_overlay_i2c_15(void) +{ + int ret; + + /* device should enable */ + ret = of_unittest_apply_overlay_check(16, 15, 0, 1, I2C_OVERLAY); + if (ret != 0) + return; + + unittest(1, "overlay test %d passed\n", 15); +} + +#else + +static inline void of_unittest_overlay_i2c_14(void) { } +static inline void of_unittest_overlay_i2c_15(void) { } + +#endif + +static void __init of_unittest_overlay(void) +{ + struct device_node *bus_np = NULL; + int ret; + + ret = platform_driver_register(&unittest_driver); + if (ret != 0) { + unittest(0, "could not register unittest driver\n"); + goto out; + } + + bus_np = of_find_node_by_path(bus_path); + if (bus_np == NULL) { + unittest(0, "could not find bus_path \"%s\"\n", bus_path); + goto out; + } + + ret = of_platform_populate(bus_np, of_default_bus_match_table, + NULL, NULL); + if (ret != 0) { + unittest(0, "could not populate bus @ \"%s\"\n", bus_path); + goto out; + } + + if (!of_unittest_device_exists(100, PDEV_OVERLAY)) { + unittest(0, "could not find unittest0 @ \"%s\"\n", + unittest_path(100, PDEV_OVERLAY)); + goto out; + } + + if (of_unittest_device_exists(101, PDEV_OVERLAY)) { + unittest(0, "unittest1 @ \"%s\" should not exist\n", + unittest_path(101, PDEV_OVERLAY)); + goto out; + } + + unittest(1, "basic infrastructure of overlays passed"); + + /* tests in sequence */ + of_unittest_overlay_0(); + of_unittest_overlay_1(); + of_unittest_overlay_2(); + of_unittest_overlay_3(); + of_unittest_overlay_4(); + of_unittest_overlay_5(); + of_unittest_overlay_6(); + of_unittest_overlay_8(); + + of_unittest_overlay_10(); + of_unittest_overlay_11(); + +#if IS_BUILTIN(CONFIG_I2C) + if (unittest(of_unittest_overlay_i2c_init() == 0, "i2c init failed\n")) + goto out; + + of_unittest_overlay_i2c_12(); + of_unittest_overlay_i2c_13(); + of_unittest_overlay_i2c_14(); + of_unittest_overlay_i2c_15(); + + of_unittest_overlay_i2c_cleanup(); +#endif + + of_unittest_destroy_tracked_overlays(); + +out: + of_node_put(bus_np); +} + +#else +static inline void __init of_unittest_overlay(void) { } +#endif + +static int __init of_unittest(void) +{ + struct device_node *np; + int res; + + /* adding data for unittest */ + res = unittest_data_add(); + if (res) + return res; + if (!of_aliases) + of_aliases = of_find_node_by_path("/aliases"); + + np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); + if (!np) { + pr_info("No testcase data in device tree; not running tests\n"); + return 0; + } + of_node_put(np); + + pr_info("start of unittest - you will see error messages\n"); + of_unittest_check_tree_linkage(); + of_unittest_check_phandles(); + of_unittest_find_node_by_name(); + of_unittest_dynamic(); + of_unittest_parse_phandle_with_args(); + of_unittest_property_string(); + of_unittest_property_copy(); + of_unittest_changeset(); + of_unittest_parse_interrupts(); + of_unittest_parse_interrupts_extended(); + of_unittest_match_node(); + of_unittest_platform_populate(); + of_unittest_overlay(); + + /* Double check linkage after removing testcase data */ + of_unittest_check_tree_linkage(); + + pr_info("end of unittest - %i passed, %i failed\n", + unittest_results.passed, unittest_results.failed); + + return 0; +} +late_initcall(of_unittest); |