diff options
Diffstat (limited to 'drivers/pci/host/pci-thunder-pem.c')
| -rw-r--r-- | drivers/pci/host/pci-thunder-pem.c | 134 |
1 files changed, 77 insertions, 57 deletions
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c index cabb92a51..9b8ab94f3 100644 --- a/drivers/pci/host/pci-thunder-pem.c +++ b/drivers/pci/host/pci-thunder-pem.c @@ -20,34 +20,22 @@ #include <linux/of_pci.h> #include <linux/platform_device.h> -#include "pci-host-common.h" +#include "../ecam.h" #define PEM_CFG_WR 0x28 #define PEM_CFG_RD 0x30 struct thunder_pem_pci { - struct gen_pci gen_pci; u32 ea_entry[3]; void __iomem *pem_reg_base; }; -static void __iomem *thunder_pem_map_bus(struct pci_bus *bus, - unsigned int devfn, int where) -{ - struct gen_pci *pci = bus->sysdata; - resource_size_t idx = bus->number - pci->cfg.bus_range->start; - - return pci->cfg.win[idx] + ((devfn << 16) | where); -} - static int thunder_pem_bridge_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { u64 read_val; - struct thunder_pem_pci *pem_pci; - struct gen_pci *pci = bus->sysdata; - - pem_pci = container_of(pci, struct thunder_pem_pci, gen_pci); + struct pci_config_window *cfg = bus->sysdata; + struct thunder_pem_pci *pem_pci = (struct thunder_pem_pci *)cfg->priv; if (devfn != 0 || where >= 2048) { *val = ~0; @@ -132,17 +120,17 @@ static int thunder_pem_bridge_read(struct pci_bus *bus, unsigned int devfn, static int thunder_pem_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { - struct gen_pci *pci = bus->sysdata; + struct pci_config_window *cfg = bus->sysdata; - if (bus->number < pci->cfg.bus_range->start || - bus->number > pci->cfg.bus_range->end) + if (bus->number < cfg->busr.start || + bus->number > cfg->busr.end) return PCIBIOS_DEVICE_NOT_FOUND; /* * The first device on the bus is the PEM PCIe bridge. * Special case its config access. */ - if (bus->number == pci->cfg.bus_range->start) + if (bus->number == cfg->busr.start) return thunder_pem_bridge_read(bus, devfn, where, size, val); return pci_generic_config_read(bus, devfn, where, size, val); @@ -153,11 +141,11 @@ static int thunder_pem_config_read(struct pci_bus *bus, unsigned int devfn, * reserved bits, this makes the code simpler and is OK as the bits * are not affected by writing zeros to them. */ -static u32 thunder_pem_bridge_w1c_bits(int where) +static u32 thunder_pem_bridge_w1c_bits(u64 where_aligned) { u32 w1c_bits = 0; - switch (where & ~3) { + switch (where_aligned) { case 0x04: /* Command/Status */ case 0x1c: /* Base and I/O Limit/Secondary Status */ w1c_bits = 0xff000000; @@ -184,15 +172,36 @@ static u32 thunder_pem_bridge_w1c_bits(int where) return w1c_bits; } +/* Some bits must be written to one so they appear to be read-only. */ +static u32 thunder_pem_bridge_w1_bits(u64 where_aligned) +{ + u32 w1_bits; + + switch (where_aligned) { + case 0x1c: /* I/O Base / I/O Limit, Secondary Status */ + /* Force 32-bit I/O addressing. */ + w1_bits = 0x0101; + break; + case 0x24: /* Prefetchable Memory Base / Prefetchable Memory Limit */ + /* Force 64-bit addressing */ + w1_bits = 0x00010001; + break; + default: + w1_bits = 0; + break; + } + return w1_bits; +} + static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - struct gen_pci *pci = bus->sysdata; - struct thunder_pem_pci *pem_pci; + struct pci_config_window *cfg = bus->sysdata; + struct thunder_pem_pci *pem_pci = (struct thunder_pem_pci *)cfg->priv; u64 write_val, read_val; + u64 where_aligned = where & ~3ull; u32 mask = 0; - pem_pci = container_of(pci, struct thunder_pem_pci, gen_pci); if (devfn != 0 || where >= 2048) return PCIBIOS_DEVICE_NOT_FOUND; @@ -205,8 +214,7 @@ static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn, */ switch (size) { case 1: - read_val = where & ~3ull; - writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD); + writeq(where_aligned, pem_pci->pem_reg_base + PEM_CFG_RD); read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD); read_val >>= 32; mask = ~(0xff << (8 * (where & 3))); @@ -215,8 +223,7 @@ static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn, val |= (u32)read_val; break; case 2: - read_val = where & ~3ull; - writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD); + writeq(where_aligned, pem_pci->pem_reg_base + PEM_CFG_RD); read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD); read_val >>= 32; mask = ~(0xffff << (8 * (where & 3))); @@ -244,11 +251,17 @@ static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn, } /* + * Some bits must be read-only with value of one. Since the + * access method allows these to be cleared if a zero is + * written, force them to one before writing. + */ + val |= thunder_pem_bridge_w1_bits(where_aligned); + + /* * Low order bits are the config address, the high order 32 * bits are the data to be written. */ - write_val = where & ~3ull; - write_val |= (((u64)val) << 32); + write_val = (((u64)val) << 32) | where_aligned; writeq(write_val, pem_pci->pem_reg_base + PEM_CFG_WR); return PCIBIOS_SUCCESSFUL; } @@ -256,53 +269,38 @@ static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn, static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - struct gen_pci *pci = bus->sysdata; + struct pci_config_window *cfg = bus->sysdata; - if (bus->number < pci->cfg.bus_range->start || - bus->number > pci->cfg.bus_range->end) + if (bus->number < cfg->busr.start || + bus->number > cfg->busr.end) return PCIBIOS_DEVICE_NOT_FOUND; /* * The first device on the bus is the PEM PCIe bridge. * Special case its config access. */ - if (bus->number == pci->cfg.bus_range->start) + if (bus->number == cfg->busr.start) return thunder_pem_bridge_write(bus, devfn, where, size, val); return pci_generic_config_write(bus, devfn, where, size, val); } -static struct gen_pci_cfg_bus_ops thunder_pem_bus_ops = { - .bus_shift = 24, - .ops = { - .map_bus = thunder_pem_map_bus, - .read = thunder_pem_config_read, - .write = thunder_pem_config_write, - } -}; - -static const struct of_device_id thunder_pem_of_match[] = { - { .compatible = "cavium,pci-host-thunder-pem", - .data = &thunder_pem_bus_ops }, - - { }, -}; -MODULE_DEVICE_TABLE(of, thunder_pem_of_match); - -static int thunder_pem_probe(struct platform_device *pdev) +static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg) { - struct device *dev = &pdev->dev; - const struct of_device_id *of_id; resource_size_t bar4_start; struct resource *res_pem; struct thunder_pem_pci *pem_pci; + struct platform_device *pdev; + + /* Only OF support for now */ + if (!dev->of_node) + return -EINVAL; pem_pci = devm_kzalloc(dev, sizeof(*pem_pci), GFP_KERNEL); if (!pem_pci) return -ENOMEM; - of_id = of_match_node(thunder_pem_of_match, dev->of_node); - pem_pci->gen_pci.cfg.ops = (struct gen_pci_cfg_bus_ops *)of_id->data; + pdev = to_platform_device(dev); /* * The second register range is the PEM bridge to the PCIe @@ -330,7 +328,29 @@ static int thunder_pem_probe(struct platform_device *pdev) pem_pci->ea_entry[1] = (u32)(res_pem->end - bar4_start) & ~3u; pem_pci->ea_entry[2] = (u32)(bar4_start >> 32); - return pci_host_common_probe(pdev, &pem_pci->gen_pci); + cfg->priv = pem_pci; + return 0; +} + +static struct pci_ecam_ops pci_thunder_pem_ops = { + .bus_shift = 24, + .init = thunder_pem_init, + .pci_ops = { + .map_bus = pci_ecam_map_bus, + .read = thunder_pem_config_read, + .write = thunder_pem_config_write, + } +}; + +static const struct of_device_id thunder_pem_of_match[] = { + { .compatible = "cavium,pci-host-thunder-pem" }, + { }, +}; +MODULE_DEVICE_TABLE(of, thunder_pem_of_match); + +static int thunder_pem_probe(struct platform_device *pdev) +{ + return pci_host_common_probe(pdev, &pci_thunder_pem_ops); } static struct platform_driver thunder_pem_driver = { |