summaryrefslogtreecommitdiff
path: root/drivers/pci/hotplug/ibmphp_pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/hotplug/ibmphp_pci.c')
-rw-r--r--drivers/pci/hotplug/ibmphp_pci.c1722
1 files changed, 1722 insertions, 0 deletions
diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c
new file mode 100644
index 000000000..814cea22a
--- /dev/null
+++ b/drivers/pci/hotplug/ibmphp_pci.c
@@ -0,0 +1,1722 @@
+/*
+ * IBM Hot Plug Controller Driver
+ *
+ * Written By: Irene Zubarev, IBM Corporation
+ *
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001,2002 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gregkh@us.ibm.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include "ibmphp.h"
+
+
+static int configure_device(struct pci_func *);
+static int configure_bridge(struct pci_func **, u8);
+static struct res_needed *scan_behind_bridge(struct pci_func *, u8);
+static int add_new_bus (struct bus_node *, struct resource_node *, struct resource_node *, struct resource_node *, u8);
+static u8 find_sec_number (u8 primary_busno, u8 slotno);
+
+/*
+ * NOTE..... If BIOS doesn't provide default routing, we assign:
+ * 9 for SCSI, 10 for LAN adapters, and 11 for everything else.
+ * If adapter is bridged, then we assign 11 to it and devices behind it.
+ * We also assign the same irq numbers for multi function devices.
+ * These are PIC mode, so shouldn't matter n.e.ways (hopefully)
+ */
+static void assign_alt_irq (struct pci_func *cur_func, u8 class_code)
+{
+ int j;
+ for (j = 0; j < 4; j++) {
+ if (cur_func->irq[j] == 0xff) {
+ switch (class_code) {
+ case PCI_BASE_CLASS_STORAGE:
+ cur_func->irq[j] = SCSI_IRQ;
+ break;
+ case PCI_BASE_CLASS_NETWORK:
+ cur_func->irq[j] = LAN_IRQ;
+ break;
+ default:
+ cur_func->irq[j] = OTHER_IRQ;
+ break;
+ }
+ }
+ }
+}
+
+/*
+ * Configures the device to be added (will allocate needed resources if it
+ * can), the device can be a bridge or a regular pci device, can also be
+ * multi-functional
+ *
+ * Input: function to be added
+ *
+ * TO DO: The error case with Multifunction device or multi function bridge,
+ * if there is an error, will need to go through all previous functions and
+ * unconfigure....or can add some code into unconfigure_card....
+ */
+int ibmphp_configure_card (struct pci_func *func, u8 slotno)
+{
+ u16 vendor_id;
+ u32 class;
+ u8 class_code;
+ u8 hdr_type, device, sec_number;
+ u8 function;
+ struct pci_func *newfunc; /* for multi devices */
+ struct pci_func *cur_func, *prev_func;
+ int rc, i, j;
+ int cleanup_count;
+ u8 flag;
+ u8 valid_device = 0x00; /* to see if we are able to read from card any device info at all */
+
+ debug ("inside configure_card, func->busno = %x\n", func->busno);
+
+ device = func->device;
+ cur_func = func;
+
+ /* We only get bus and device from IRQ routing table. So at this point,
+ * func->busno is correct, and func->device contains only device (at the 5
+ * highest bits)
+ */
+
+ /* For every function on the card */
+ for (function = 0x00; function < 0x08; function++) {
+ unsigned int devfn = PCI_DEVFN(device, function);
+ ibmphp_pci_bus->number = cur_func->busno;
+
+ cur_func->function = function;
+
+ debug ("inside the loop, cur_func->busno = %x, cur_func->device = %x, cur_func->function = %x\n",
+ cur_func->busno, cur_func->device, cur_func->function);
+
+ pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id);
+
+ debug ("vendor_id is %x\n", vendor_id);
+ if (vendor_id != PCI_VENDOR_ID_NOTVALID) {
+ /* found correct device!!! */
+ debug ("found valid device, vendor_id = %x\n", vendor_id);
+
+ ++valid_device;
+
+ /* header: x x x x x x x x
+ * | |___________|=> 1=PPB bridge, 0=normal device, 2=CardBus Bridge
+ * |_=> 0 = single function device, 1 = multi-function device
+ */
+
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type);
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class);
+
+ class_code = class >> 24;
+ debug ("hrd_type = %x, class = %x, class_code %x\n", hdr_type, class, class_code);
+ class >>= 8; /* to take revision out, class = class.subclass.prog i/f */
+ if (class == PCI_CLASS_NOT_DEFINED_VGA) {
+ err ("The device %x is VGA compatible and as is not supported for hot plugging. "
+ "Please choose another device.\n", cur_func->device);
+ return -ENODEV;
+ } else if (class == PCI_CLASS_DISPLAY_VGA) {
+ err ("The device %x is not supported for hot plugging. Please choose another device.\n",
+ cur_func->device);
+ return -ENODEV;
+ }
+ switch (hdr_type) {
+ case PCI_HEADER_TYPE_NORMAL:
+ debug ("single device case.... vendor id = %x, hdr_type = %x, class = %x\n", vendor_id, hdr_type, class);
+ assign_alt_irq (cur_func, class_code);
+ rc = configure_device(cur_func);
+ if (rc < 0) {
+ /* We need to do this in case some other BARs were properly inserted */
+ err ("was not able to configure devfunc %x on bus %x.\n",
+ cur_func->device, cur_func->busno);
+ cleanup_count = 6;
+ goto error;
+ }
+ cur_func->next = NULL;
+ function = 0x8;
+ break;
+ case PCI_HEADER_TYPE_MULTIDEVICE:
+ assign_alt_irq (cur_func, class_code);
+ rc = configure_device(cur_func);
+ if (rc < 0) {
+ /* We need to do this in case some other BARs were properly inserted */
+ err ("was not able to configure devfunc %x on bus %x...bailing out\n",
+ cur_func->device, cur_func->busno);
+ cleanup_count = 6;
+ goto error;
+ }
+ newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL);
+ if (!newfunc) {
+ err ("out of system memory\n");
+ return -ENOMEM;
+ }
+ newfunc->busno = cur_func->busno;
+ newfunc->device = device;
+ cur_func->next = newfunc;
+ cur_func = newfunc;
+ for (j = 0; j < 4; j++)
+ newfunc->irq[j] = cur_func->irq[j];
+ break;
+ case PCI_HEADER_TYPE_MULTIBRIDGE:
+ class >>= 8;
+ if (class != PCI_CLASS_BRIDGE_PCI) {
+ err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n",
+ cur_func->device);
+ return -ENODEV;
+ }
+ assign_alt_irq (cur_func, class_code);
+ rc = configure_bridge (&cur_func, slotno);
+ if (rc == -ENODEV) {
+ err ("You chose to insert Single Bridge, or nested bridges, this is not supported...\n");
+ err ("Bus %x, devfunc %x\n", cur_func->busno, cur_func->device);
+ return rc;
+ }
+ if (rc) {
+ /* We need to do this in case some other BARs were properly inserted */
+ err ("was not able to hot-add PPB properly.\n");
+ func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */
+ cleanup_count = 2;
+ goto error;
+ }
+
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number);
+ flag = 0;
+ for (i = 0; i < 32; i++) {
+ if (func->devices[i]) {
+ newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL);
+ if (!newfunc) {
+ err ("out of system memory\n");
+ return -ENOMEM;
+ }
+ newfunc->busno = sec_number;
+ newfunc->device = (u8) i;
+ for (j = 0; j < 4; j++)
+ newfunc->irq[j] = cur_func->irq[j];
+
+ if (flag) {
+ for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next) ;
+ prev_func->next = newfunc;
+ } else
+ cur_func->next = newfunc;
+
+ rc = ibmphp_configure_card (newfunc, slotno);
+ /* This could only happen if kmalloc failed */
+ if (rc) {
+ /* We need to do this in case bridge itself got configured properly, but devices behind it failed */
+ func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */
+ cleanup_count = 2;
+ goto error;
+ }
+ flag = 1;
+ }
+ }
+
+ newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL);
+ if (!newfunc) {
+ err ("out of system memory\n");
+ return -ENOMEM;
+ }
+ newfunc->busno = cur_func->busno;
+ newfunc->device = device;
+ for (j = 0; j < 4; j++)
+ newfunc->irq[j] = cur_func->irq[j];
+ for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next) ;
+ prev_func->next = newfunc;
+ cur_func = newfunc;
+ break;
+ case PCI_HEADER_TYPE_BRIDGE:
+ class >>= 8;
+ debug ("class now is %x\n", class);
+ if (class != PCI_CLASS_BRIDGE_PCI) {
+ err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n",
+ cur_func->device);
+ return -ENODEV;
+ }
+
+ assign_alt_irq (cur_func, class_code);
+
+ debug ("cur_func->busno b4 configure_bridge is %x\n", cur_func->busno);
+ rc = configure_bridge (&cur_func, slotno);
+ if (rc == -ENODEV) {
+ err ("You chose to insert Single Bridge, or nested bridges, this is not supported...\n");
+ err ("Bus %x, devfunc %x\n", cur_func->busno, cur_func->device);
+ return rc;
+ }
+ if (rc) {
+ /* We need to do this in case some other BARs were properly inserted */
+ func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */
+ err ("was not able to hot-add PPB properly.\n");
+ cleanup_count = 2;
+ goto error;
+ }
+ debug ("cur_func->busno = %x, device = %x, function = %x\n",
+ cur_func->busno, device, function);
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number);
+ debug ("after configuring bridge..., sec_number = %x\n", sec_number);
+ flag = 0;
+ for (i = 0; i < 32; i++) {
+ if (func->devices[i]) {
+ debug ("inside for loop, device is %x\n", i);
+ newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL);
+ if (!newfunc) {
+ err (" out of system memory\n");
+ return -ENOMEM;
+ }
+ newfunc->busno = sec_number;
+ newfunc->device = (u8) i;
+ for (j = 0; j < 4; j++)
+ newfunc->irq[j] = cur_func->irq[j];
+
+ if (flag) {
+ for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next) ;
+ prev_func->next = newfunc;
+ } else
+ cur_func->next = newfunc;
+
+ rc = ibmphp_configure_card (newfunc, slotno);
+
+ /* Again, this case should not happen... For complete paranoia, will need to call remove_bus */
+ if (rc) {
+ /* We need to do this in case some other BARs were properly inserted */
+ func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */
+ cleanup_count = 2;
+ goto error;
+ }
+ flag = 1;
+ }
+ }
+
+ function = 0x8;
+ break;
+ default:
+ err ("MAJOR PROBLEM!!!!, header type not supported? %x\n", hdr_type);
+ return -ENXIO;
+ break;
+ } /* end of switch */
+ } /* end of valid device */
+ } /* end of for */
+
+ if (!valid_device) {
+ err ("Cannot find any valid devices on the card. Or unable to read from card.\n");
+ return -ENODEV;
+ }
+
+ return 0;
+
+error:
+ for (i = 0; i < cleanup_count; i++) {
+ if (cur_func->io[i]) {
+ ibmphp_remove_resource (cur_func->io[i]);
+ cur_func->io[i] = NULL;
+ } else if (cur_func->pfmem[i]) {
+ ibmphp_remove_resource (cur_func->pfmem[i]);
+ cur_func->pfmem[i] = NULL;
+ } else if (cur_func->mem[i]) {
+ ibmphp_remove_resource (cur_func->mem[i]);
+ cur_func->mem[i] = NULL;
+ }
+ }
+ return rc;
+}
+
+/*
+ * This function configures the pci BARs of a single device.
+ * Input: pointer to the pci_func
+ * Output: configured PCI, 0, or error
+ */
+static int configure_device (struct pci_func *func)
+{
+ u32 bar[6];
+ u32 address[] = {
+ PCI_BASE_ADDRESS_0,
+ PCI_BASE_ADDRESS_1,
+ PCI_BASE_ADDRESS_2,
+ PCI_BASE_ADDRESS_3,
+ PCI_BASE_ADDRESS_4,
+ PCI_BASE_ADDRESS_5,
+ 0
+ };
+ u8 irq;
+ int count;
+ int len[6];
+ struct resource_node *io[6];
+ struct resource_node *mem[6];
+ struct resource_node *mem_tmp;
+ struct resource_node *pfmem[6];
+ unsigned int devfn;
+
+ debug ("%s - inside\n", __func__);
+
+ devfn = PCI_DEVFN(func->device, func->function);
+ ibmphp_pci_bus->number = func->busno;
+
+ for (count = 0; address[count]; count++) { /* for 6 BARs */
+
+ /* not sure if i need this. per scott, said maybe need * something like this
+ if devices don't adhere 100% to the spec, so don't want to write
+ to the reserved bits
+
+ pcibios_read_config_byte(cur_func->busno, cur_func->device,
+ PCI_BASE_ADDRESS_0 + 4 * count, &tmp);
+ if (tmp & 0x01) // IO
+ pcibios_write_config_dword(cur_func->busno, cur_func->device,
+ PCI_BASE_ADDRESS_0 + 4 * count, 0xFFFFFFFD);
+ else // Memory
+ pcibios_write_config_dword(cur_func->busno, cur_func->device,
+ PCI_BASE_ADDRESS_0 + 4 * count, 0xFFFFFFFF);
+ */
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF);
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+
+ if (!bar[count]) /* This BAR is not implemented */
+ continue;
+
+ debug ("Device %x BAR %d wants %x\n", func->device, count, bar[count]);
+
+ if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) {
+ /* This is IO */
+ debug ("inside IO SPACE\n");
+
+ len[count] = bar[count] & 0xFFFFFFFC;
+ len[count] = ~len[count] + 1;
+
+ debug ("len[count] in IO %x, count %d\n", len[count], count);
+
+ io[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
+
+ if (!io[count]) {
+ err ("out of system memory\n");
+ return -ENOMEM;
+ }
+ io[count]->type = IO;
+ io[count]->busno = func->busno;
+ io[count]->devfunc = PCI_DEVFN(func->device, func->function);
+ io[count]->len = len[count];
+ if (ibmphp_check_resource(io[count], 0) == 0) {
+ ibmphp_add_resource (io[count]);
+ func->io[count] = io[count];
+ } else {
+ err ("cannot allocate requested io for bus %x device %x function %x len %x\n",
+ func->busno, func->device, func->function, len[count]);
+ kfree (io[count]);
+ return -EIO;
+ }
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->io[count]->start);
+
+ /* _______________This is for debugging purposes only_____________________ */
+ debug ("b4 writing, the IO address is %x\n", func->io[count]->start);
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+ debug ("after writing.... the start address is %x\n", bar[count]);
+ /* _________________________________________________________________________*/
+
+ } else {
+ /* This is Memory */
+ if (bar[count] & PCI_BASE_ADDRESS_MEM_PREFETCH) {
+ /* pfmem */
+ debug ("PFMEM SPACE\n");
+
+ len[count] = bar[count] & 0xFFFFFFF0;
+ len[count] = ~len[count] + 1;
+
+ debug ("len[count] in PFMEM %x, count %d\n", len[count], count);
+
+ pfmem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
+ if (!pfmem[count]) {
+ err ("out of system memory\n");
+ return -ENOMEM;
+ }
+ pfmem[count]->type = PFMEM;
+ pfmem[count]->busno = func->busno;
+ pfmem[count]->devfunc = PCI_DEVFN(func->device,
+ func->function);
+ pfmem[count]->len = len[count];
+ pfmem[count]->fromMem = 0;
+ if (ibmphp_check_resource (pfmem[count], 0) == 0) {
+ ibmphp_add_resource (pfmem[count]);
+ func->pfmem[count] = pfmem[count];
+ } else {
+ mem_tmp = kzalloc(sizeof(*mem_tmp), GFP_KERNEL);
+ if (!mem_tmp) {
+ err ("out of system memory\n");
+ kfree (pfmem[count]);
+ return -ENOMEM;
+ }
+ mem_tmp->type = MEM;
+ mem_tmp->busno = pfmem[count]->busno;
+ mem_tmp->devfunc = pfmem[count]->devfunc;
+ mem_tmp->len = pfmem[count]->len;
+ debug ("there's no pfmem... going into mem.\n");
+ if (ibmphp_check_resource (mem_tmp, 0) == 0) {
+ ibmphp_add_resource (mem_tmp);
+ pfmem[count]->fromMem = 1;
+ pfmem[count]->rangeno = mem_tmp->rangeno;
+ pfmem[count]->start = mem_tmp->start;
+ pfmem[count]->end = mem_tmp->end;
+ ibmphp_add_pfmem_from_mem (pfmem[count]);
+ func->pfmem[count] = pfmem[count];
+ } else {
+ err ("cannot allocate requested pfmem for bus %x, device %x, len %x\n",
+ func->busno, func->device, len[count]);
+ kfree (mem_tmp);
+ kfree (pfmem[count]);
+ return -EIO;
+ }
+ }
+
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start);
+
+ /*_______________This is for debugging purposes only______________________________*/
+ debug ("b4 writing, start address is %x\n", func->pfmem[count]->start);
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+ debug ("after writing, start address is %x\n", bar[count]);
+ /*_________________________________________________________________________________*/
+
+ if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) { /* takes up another dword */
+ debug ("inside the mem 64 case, count %d\n", count);
+ count += 1;
+ /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000);
+ }
+ } else {
+ /* regular memory */
+ debug ("REGULAR MEM SPACE\n");
+
+ len[count] = bar[count] & 0xFFFFFFF0;
+ len[count] = ~len[count] + 1;
+
+ debug ("len[count] in Mem %x, count %d\n", len[count], count);
+
+ mem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
+ if (!mem[count]) {
+ err ("out of system memory\n");
+ return -ENOMEM;
+ }
+ mem[count]->type = MEM;
+ mem[count]->busno = func->busno;
+ mem[count]->devfunc = PCI_DEVFN(func->device,
+ func->function);
+ mem[count]->len = len[count];
+ if (ibmphp_check_resource (mem[count], 0) == 0) {
+ ibmphp_add_resource (mem[count]);
+ func->mem[count] = mem[count];
+ } else {
+ err ("cannot allocate requested mem for bus %x, device %x, len %x\n",
+ func->busno, func->device, len[count]);
+ kfree (mem[count]);
+ return -EIO;
+ }
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->mem[count]->start);
+ /* _______________________This is for debugging purposes only _______________________*/
+ debug ("b4 writing, start address is %x\n", func->mem[count]->start);
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+ debug ("after writing, the address is %x\n", bar[count]);
+ /* __________________________________________________________________________________*/
+
+ if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ /* takes up another dword */
+ debug ("inside mem 64 case, reg. mem, count %d\n", count);
+ count += 1;
+ /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000);
+ }
+ }
+ } /* end of mem */
+ } /* end of for */
+
+ func->bus = 0; /* To indicate that this is not a PPB */
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq);
+ if ((irq > 0x00) && (irq < 0x05))
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]);
+
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_CACHE_LINE_SIZE, CACHE);
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_LATENCY_TIMER, LATENCY);
+
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, PCI_ROM_ADDRESS, 0x00L);
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_COMMAND, DEVICEENABLE);
+
+ return 0;
+}
+
+/******************************************************************************
+ * This routine configures a PCI-2-PCI bridge and the functions behind it
+ * Parameters: pci_func
+ * Returns:
+ ******************************************************************************/
+static int configure_bridge (struct pci_func **func_passed, u8 slotno)
+{
+ int count;
+ int i;
+ int rc;
+ u8 sec_number;
+ u8 io_base;
+ u16 pfmem_base;
+ u32 bar[2];
+ u32 len[2];
+ u8 flag_io = 0;
+ u8 flag_mem = 0;
+ u8 flag_pfmem = 0;
+ u8 need_io_upper = 0;
+ u8 need_pfmem_upper = 0;
+ struct res_needed *amount_needed = NULL;
+ struct resource_node *io = NULL;
+ struct resource_node *bus_io[2] = {NULL, NULL};
+ struct resource_node *mem = NULL;
+ struct resource_node *bus_mem[2] = {NULL, NULL};
+ struct resource_node *mem_tmp = NULL;
+ struct resource_node *pfmem = NULL;
+ struct resource_node *bus_pfmem[2] = {NULL, NULL};
+ struct bus_node *bus;
+ u32 address[] = {
+ PCI_BASE_ADDRESS_0,
+ PCI_BASE_ADDRESS_1,
+ 0
+ };
+ struct pci_func *func = *func_passed;
+ unsigned int devfn;
+ u8 irq;
+ int retval;
+
+ debug ("%s - enter\n", __func__);
+
+ devfn = PCI_DEVFN(func->function, func->device);
+ ibmphp_pci_bus->number = func->busno;
+
+ /* Configuring necessary info for the bridge so that we could see the devices
+ * behind it
+ */
+
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, func->busno);
+
+ /* _____________________For debugging purposes only __________________________
+ pci_bus_config_byte (ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, &pri_number);
+ debug ("primary # written into the bridge is %x\n", pri_number);
+ ___________________________________________________________________________*/
+
+ /* in EBDA, only get allocated 1 additional bus # per slot */
+ sec_number = find_sec_number (func->busno, slotno);
+ if (sec_number == 0xff) {
+ err ("cannot allocate secondary bus number for the bridged device\n");
+ return -EINVAL;
+ }
+
+ debug ("after find_sec_number, the number we got is %x\n", sec_number);
+ debug ("AFTER FIND_SEC_NUMBER, func->busno IS %x\n", func->busno);
+
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, sec_number);
+
+ /* __________________For debugging purposes only __________________________________
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number);
+ debug ("sec_number after write/read is %x\n", sec_number);
+ ________________________________________________________________________________*/
+
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, sec_number);
+
+ /* __________________For debugging purposes only ____________________________________
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, &sec_number);
+ debug ("subordinate number after write/read is %x\n", sec_number);
+ __________________________________________________________________________________*/
+
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_CACHE_LINE_SIZE, CACHE);
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_LATENCY_TIMER, LATENCY);
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_SEC_LATENCY_TIMER, LATENCY);
+
+ debug ("func->busno is %x\n", func->busno);
+ debug ("sec_number after writing is %x\n", sec_number);
+
+
+ /* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ !!!!!!!!!!!!!!!NEED TO ADD!!! FAST BACK-TO-BACK ENABLE!!!!!!!!!!!!!!!!!!!!
+ !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*/
+
+
+ /* First we need to allocate mem/io for the bridge itself in case it needs it */
+ for (count = 0; address[count]; count++) { /* for 2 BARs */
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF);
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+
+ if (!bar[count]) {
+ /* This BAR is not implemented */
+ debug ("so we come here then, eh?, count = %d\n", count);
+ continue;
+ }
+ // tmp_bar = bar[count];
+
+ debug ("Bar %d wants %x\n", count, bar[count]);
+
+ if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) {
+ /* This is IO */
+ len[count] = bar[count] & 0xFFFFFFFC;
+ len[count] = ~len[count] + 1;
+
+ debug ("len[count] in IO = %x\n", len[count]);
+
+ bus_io[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
+
+ if (!bus_io[count]) {
+ err ("out of system memory\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ bus_io[count]->type = IO;
+ bus_io[count]->busno = func->busno;
+ bus_io[count]->devfunc = PCI_DEVFN(func->device,
+ func->function);
+ bus_io[count]->len = len[count];
+ if (ibmphp_check_resource (bus_io[count], 0) == 0) {
+ ibmphp_add_resource (bus_io[count]);
+ func->io[count] = bus_io[count];
+ } else {
+ err ("cannot allocate requested io for bus %x, device %x, len %x\n",
+ func->busno, func->device, len[count]);
+ kfree (bus_io[count]);
+ return -EIO;
+ }
+
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->io[count]->start);
+
+ } else {
+ /* This is Memory */
+ if (bar[count] & PCI_BASE_ADDRESS_MEM_PREFETCH) {
+ /* pfmem */
+ len[count] = bar[count] & 0xFFFFFFF0;
+ len[count] = ~len[count] + 1;
+
+ debug ("len[count] in PFMEM = %x\n", len[count]);
+
+ bus_pfmem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
+ if (!bus_pfmem[count]) {
+ err ("out of system memory\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ bus_pfmem[count]->type = PFMEM;
+ bus_pfmem[count]->busno = func->busno;
+ bus_pfmem[count]->devfunc = PCI_DEVFN(func->device,
+ func->function);
+ bus_pfmem[count]->len = len[count];
+ bus_pfmem[count]->fromMem = 0;
+ if (ibmphp_check_resource (bus_pfmem[count], 0) == 0) {
+ ibmphp_add_resource (bus_pfmem[count]);
+ func->pfmem[count] = bus_pfmem[count];
+ } else {
+ mem_tmp = kzalloc(sizeof(*mem_tmp), GFP_KERNEL);
+ if (!mem_tmp) {
+ err ("out of system memory\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ mem_tmp->type = MEM;
+ mem_tmp->busno = bus_pfmem[count]->busno;
+ mem_tmp->devfunc = bus_pfmem[count]->devfunc;
+ mem_tmp->len = bus_pfmem[count]->len;
+ if (ibmphp_check_resource (mem_tmp, 0) == 0) {
+ ibmphp_add_resource (mem_tmp);
+ bus_pfmem[count]->fromMem = 1;
+ bus_pfmem[count]->rangeno = mem_tmp->rangeno;
+ ibmphp_add_pfmem_from_mem (bus_pfmem[count]);
+ func->pfmem[count] = bus_pfmem[count];
+ } else {
+ err ("cannot allocate requested pfmem for bus %x, device %x, len %x\n",
+ func->busno, func->device, len[count]);
+ kfree (mem_tmp);
+ kfree (bus_pfmem[count]);
+ return -EIO;
+ }
+ }
+
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start);
+
+ if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ /* takes up another dword */
+ count += 1;
+ /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000);
+
+ }
+ } else {
+ /* regular memory */
+ len[count] = bar[count] & 0xFFFFFFF0;
+ len[count] = ~len[count] + 1;
+
+ debug ("len[count] in Memory is %x\n", len[count]);
+
+ bus_mem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL);
+ if (!bus_mem[count]) {
+ err ("out of system memory\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ bus_mem[count]->type = MEM;
+ bus_mem[count]->busno = func->busno;
+ bus_mem[count]->devfunc = PCI_DEVFN(func->device,
+ func->function);
+ bus_mem[count]->len = len[count];
+ if (ibmphp_check_resource (bus_mem[count], 0) == 0) {
+ ibmphp_add_resource (bus_mem[count]);
+ func->mem[count] = bus_mem[count];
+ } else {
+ err ("cannot allocate requested mem for bus %x, device %x, len %x\n",
+ func->busno, func->device, len[count]);
+ kfree (bus_mem[count]);
+ return -EIO;
+ }
+
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->mem[count]->start);
+
+ if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ /* takes up another dword */
+ count += 1;
+ /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000);
+
+ }
+ }
+ } /* end of mem */
+ } /* end of for */
+
+ /* Now need to see how much space the devices behind the bridge needed */
+ amount_needed = scan_behind_bridge (func, sec_number);
+ if (amount_needed == NULL)
+ return -ENOMEM;
+
+ ibmphp_pci_bus->number = func->busno;
+ debug ("after coming back from scan_behind_bridge\n");
+ debug ("amount_needed->not_correct = %x\n", amount_needed->not_correct);
+ debug ("amount_needed->io = %x\n", amount_needed->io);
+ debug ("amount_needed->mem = %x\n", amount_needed->mem);
+ debug ("amount_needed->pfmem = %x\n", amount_needed->pfmem);
+
+ if (amount_needed->not_correct) {
+ debug ("amount_needed is not correct\n");
+ for (count = 0; address[count]; count++) {
+ /* for 2 BARs */
+ if (bus_io[count]) {
+ ibmphp_remove_resource (bus_io[count]);
+ func->io[count] = NULL;
+ } else if (bus_pfmem[count]) {
+ ibmphp_remove_resource (bus_pfmem[count]);
+ func->pfmem[count] = NULL;
+ } else if (bus_mem[count]) {
+ ibmphp_remove_resource (bus_mem[count]);
+ func->mem[count] = NULL;
+ }
+ }
+ kfree (amount_needed);
+ return -ENODEV;
+ }
+
+ if (!amount_needed->io) {
+ debug ("it doesn't want IO?\n");
+ flag_io = 1;
+ } else {
+ debug ("it wants %x IO behind the bridge\n", amount_needed->io);
+ io = kzalloc(sizeof(*io), GFP_KERNEL);
+
+ if (!io) {
+ err ("out of system memory\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ io->type = IO;
+ io->busno = func->busno;
+ io->devfunc = PCI_DEVFN(func->device, func->function);
+ io->len = amount_needed->io;
+ if (ibmphp_check_resource (io, 1) == 0) {
+ debug ("were we able to add io\n");
+ ibmphp_add_resource (io);
+ flag_io = 1;
+ }
+ }
+
+ if (!amount_needed->mem) {
+ debug ("it doesn't want n.e.memory?\n");
+ flag_mem = 1;
+ } else {
+ debug ("it wants %x memory behind the bridge\n", amount_needed->mem);
+ mem = kzalloc(sizeof(*mem), GFP_KERNEL);
+ if (!mem) {
+ err ("out of system memory\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ mem->type = MEM;
+ mem->busno = func->busno;
+ mem->devfunc = PCI_DEVFN(func->device, func->function);
+ mem->len = amount_needed->mem;
+ if (ibmphp_check_resource (mem, 1) == 0) {
+ ibmphp_add_resource (mem);
+ flag_mem = 1;
+ debug ("were we able to add mem\n");
+ }
+ }
+
+ if (!amount_needed->pfmem) {
+ debug ("it doesn't want n.e.pfmem mem?\n");
+ flag_pfmem = 1;
+ } else {
+ debug ("it wants %x pfmemory behind the bridge\n", amount_needed->pfmem);
+ pfmem = kzalloc(sizeof(*pfmem), GFP_KERNEL);
+ if (!pfmem) {
+ err ("out of system memory\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ pfmem->type = PFMEM;
+ pfmem->busno = func->busno;
+ pfmem->devfunc = PCI_DEVFN(func->device, func->function);
+ pfmem->len = amount_needed->pfmem;
+ pfmem->fromMem = 0;
+ if (ibmphp_check_resource (pfmem, 1) == 0) {
+ ibmphp_add_resource (pfmem);
+ flag_pfmem = 1;
+ } else {
+ mem_tmp = kzalloc(sizeof(*mem_tmp), GFP_KERNEL);
+ if (!mem_tmp) {
+ err ("out of system memory\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ mem_tmp->type = MEM;
+ mem_tmp->busno = pfmem->busno;
+ mem_tmp->devfunc = pfmem->devfunc;
+ mem_tmp->len = pfmem->len;
+ if (ibmphp_check_resource (mem_tmp, 1) == 0) {
+ ibmphp_add_resource (mem_tmp);
+ pfmem->fromMem = 1;
+ pfmem->rangeno = mem_tmp->rangeno;
+ ibmphp_add_pfmem_from_mem (pfmem);
+ flag_pfmem = 1;
+ }
+ }
+ }
+
+ debug ("b4 if (flag_io && flag_mem && flag_pfmem)\n");
+ debug ("flag_io = %x, flag_mem = %x, flag_pfmem = %x\n", flag_io, flag_mem, flag_pfmem);
+
+ if (flag_io && flag_mem && flag_pfmem) {
+ /* If on bootup, there was a bridged card in this slot,
+ * then card was removed and ibmphp got unloaded and loaded
+ * back again, there's no way for us to remove the bus
+ * struct, so no need to kmalloc, can use existing node
+ */
+ bus = ibmphp_find_res_bus (sec_number);
+ if (!bus) {
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (!bus) {
+ err ("out of system memory\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ bus->busno = sec_number;
+ debug ("b4 adding new bus\n");
+ rc = add_new_bus (bus, io, mem, pfmem, func->busno);
+ } else if (!(bus->rangeIO) && !(bus->rangeMem) && !(bus->rangePFMem))
+ rc = add_new_bus (bus, io, mem, pfmem, 0xFF);
+ else {
+ err ("expected bus structure not empty?\n");
+ retval = -EIO;
+ goto error;
+ }
+ if (rc) {
+ if (rc == -ENOMEM) {
+ ibmphp_remove_bus (bus, func->busno);
+ kfree (amount_needed);
+ return rc;
+ }
+ retval = rc;
+ goto error;
+ }
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, &io_base);
+ pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &pfmem_base);
+
+ if ((io_base & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
+ debug ("io 32\n");
+ need_io_upper = 1;
+ }
+ if ((pfmem_base & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
+ debug ("pfmem 64\n");
+ need_pfmem_upper = 1;
+ }
+
+ if (bus->noIORanges) {
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00 | bus->rangeIO->start >> 8);
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00 | bus->rangeIO->end >> 8);
+
+ /* _______________This is for debugging purposes only ____________________
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, &temp);
+ debug ("io_base = %x\n", (temp & PCI_IO_RANGE_TYPE_MASK) << 8);
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, &temp);
+ debug ("io_limit = %x\n", (temp & PCI_IO_RANGE_TYPE_MASK) << 8);
+ ________________________________________________________________________*/
+
+ if (need_io_upper) { /* since can't support n.e.ways */
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_IO_BASE_UPPER16, 0x0000);
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_IO_LIMIT_UPPER16, 0x0000);
+ }
+ } else {
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00);
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00);
+ }
+
+ if (bus->noMemRanges) {
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0x0000 | bus->rangeMem->start >> 16);
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000 | bus->rangeMem->end >> 16);
+
+ /* ____________________This is for debugging purposes only ________________________
+ pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, &temp);
+ debug ("mem_base = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16);
+ pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, &temp);
+ debug ("mem_limit = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16);
+ __________________________________________________________________________________*/
+
+ } else {
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0xffff);
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000);
+ }
+ if (bus->noPFMemRanges) {
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, 0x0000 | bus->rangePFMem->start >> 16);
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, 0x0000 | bus->rangePFMem->end >> 16);
+
+ /* __________________________This is for debugging purposes only _______________________
+ pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &temp);
+ debug ("pfmem_base = %x", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16);
+ pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &temp);
+ debug ("pfmem_limit = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16);
+ ______________________________________________________________________________________*/
+
+ if (need_pfmem_upper) { /* since can't support n.e.ways */
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, PCI_PREF_BASE_UPPER32, 0x00000000);
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, PCI_PREF_LIMIT_UPPER32, 0x00000000);
+ }
+ } else {
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, 0xffff);
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, 0x0000);
+ }
+
+ debug ("b4 writing control information\n");
+
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq);
+ if ((irq > 0x00) && (irq < 0x05))
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]);
+ /*
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, ctrl);
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_PARITY);
+ pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_SERR);
+ */
+
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_COMMAND, DEVICEENABLE);
+ pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, 0x07);
+ for (i = 0; i < 32; i++) {
+ if (amount_needed->devices[i]) {
+ debug ("device where devices[i] is 1 = %x\n", i);
+ func->devices[i] = 1;
+ }
+ }
+ func->bus = 1; /* For unconfiguring, to indicate it's PPB */
+ func_passed = &func;
+ debug ("func->busno b4 returning is %x\n", func->busno);
+ debug ("func->busno b4 returning in the other structure is %x\n", (*func_passed)->busno);
+ kfree (amount_needed);
+ return 0;
+ } else {
+ err ("Configuring bridge was unsuccessful...\n");
+ mem_tmp = NULL;
+ retval = -EIO;
+ goto error;
+ }
+
+error:
+ kfree(amount_needed);
+ if (pfmem)
+ ibmphp_remove_resource (pfmem);
+ if (io)
+ ibmphp_remove_resource (io);
+ if (mem)
+ ibmphp_remove_resource (mem);
+ for (i = 0; i < 2; i++) { /* for 2 BARs */
+ if (bus_io[i]) {
+ ibmphp_remove_resource (bus_io[i]);
+ func->io[i] = NULL;
+ } else if (bus_pfmem[i]) {
+ ibmphp_remove_resource (bus_pfmem[i]);
+ func->pfmem[i] = NULL;
+ } else if (bus_mem[i]) {
+ ibmphp_remove_resource (bus_mem[i]);
+ func->mem[i] = NULL;
+ }
+ }
+ return retval;
+}
+
+/*****************************************************************************
+ * This function adds up the amount of resources needed behind the PPB bridge
+ * and passes it to the configure_bridge function
+ * Input: bridge function
+ * Output: amount of resources needed
+ *****************************************************************************/
+static struct res_needed *scan_behind_bridge (struct pci_func *func, u8 busno)
+{
+ int count, len[6];
+ u16 vendor_id;
+ u8 hdr_type;
+ u8 device, function;
+ unsigned int devfn;
+ int howmany = 0; /*this is to see if there are any devices behind the bridge */
+
+ u32 bar[6], class;
+ u32 address[] = {
+ PCI_BASE_ADDRESS_0,
+ PCI_BASE_ADDRESS_1,
+ PCI_BASE_ADDRESS_2,
+ PCI_BASE_ADDRESS_3,
+ PCI_BASE_ADDRESS_4,
+ PCI_BASE_ADDRESS_5,
+ 0
+ };
+ struct res_needed *amount;
+
+ amount = kzalloc(sizeof(*amount), GFP_KERNEL);
+ if (amount == NULL)
+ return NULL;
+
+ ibmphp_pci_bus->number = busno;
+
+ debug ("the bus_no behind the bridge is %x\n", busno);
+ debug ("scanning devices behind the bridge...\n");
+ for (device = 0; device < 32; device++) {
+ amount->devices[device] = 0;
+ for (function = 0; function < 8; function++) {
+ devfn = PCI_DEVFN(device, function);
+
+ pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id);
+
+ if (vendor_id != PCI_VENDOR_ID_NOTVALID) {
+ /* found correct device!!! */
+ howmany++;
+
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type);
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class);
+
+ debug ("hdr_type behind the bridge is %x\n", hdr_type);
+ if (hdr_type & PCI_HEADER_TYPE_BRIDGE) {
+ err ("embedded bridges not supported for hot-plugging.\n");
+ amount->not_correct = 1;
+ return amount;
+ }
+
+ class >>= 8; /* to take revision out, class = class.subclass.prog i/f */
+ if (class == PCI_CLASS_NOT_DEFINED_VGA) {
+ err ("The device %x is VGA compatible and as is not supported for hot plugging. Please choose another device.\n", device);
+ amount->not_correct = 1;
+ return amount;
+ } else if (class == PCI_CLASS_DISPLAY_VGA) {
+ err ("The device %x is not supported for hot plugging. Please choose another device.\n", device);
+ amount->not_correct = 1;
+ return amount;
+ }
+
+ amount->devices[device] = 1;
+
+ for (count = 0; address[count]; count++) {
+ /* for 6 BARs */
+ /*
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, address[count], &tmp);
+ if (tmp & 0x01) // IO
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFD);
+ else // MEMORY
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF);
+ */
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF);
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+
+ debug ("what is bar[count]? %x, count = %d\n", bar[count], count);
+
+ if (!bar[count]) /* This BAR is not implemented */
+ continue;
+
+ //tmp_bar = bar[count];
+
+ debug ("count %d device %x function %x wants %x resources\n", count, device, function, bar[count]);
+
+ if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) {
+ /* This is IO */
+ len[count] = bar[count] & 0xFFFFFFFC;
+ len[count] = ~len[count] + 1;
+ amount->io += len[count];
+ } else {
+ /* This is Memory */
+ if (bar[count] & PCI_BASE_ADDRESS_MEM_PREFETCH) {
+ /* pfmem */
+ len[count] = bar[count] & 0xFFFFFFF0;
+ len[count] = ~len[count] + 1;
+ amount->pfmem += len[count];
+ if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64)
+ /* takes up another dword */
+ count += 1;
+
+ } else {
+ /* regular memory */
+ len[count] = bar[count] & 0xFFFFFFF0;
+ len[count] = ~len[count] + 1;
+ amount->mem += len[count];
+ if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ /* takes up another dword */
+ count += 1;
+ }
+ }
+ }
+ } /* end for */
+ } /* end if (valid) */
+ } /* end for */
+ } /* end for */
+
+ if (!howmany)
+ amount->not_correct = 1;
+ else
+ amount->not_correct = 0;
+ if ((amount->io) && (amount->io < IOBRIDGE))
+ amount->io = IOBRIDGE;
+ if ((amount->mem) && (amount->mem < MEMBRIDGE))
+ amount->mem = MEMBRIDGE;
+ if ((amount->pfmem) && (amount->pfmem < MEMBRIDGE))
+ amount->pfmem = MEMBRIDGE;
+ return amount;
+}
+
+/* The following 3 unconfigure_boot_ routines deal with the case when we had the card
+ * upon bootup in the system, since we don't allocate func to such case, we need to read
+ * the start addresses from pci config space and then find the corresponding entries in
+ * our resource lists. The functions return either 0, -ENODEV, or -1 (general failure)
+ * Change: we also call these functions even if we configured the card ourselves (i.e., not
+ * the bootup case), since it should work same way
+ */
+static int unconfigure_boot_device (u8 busno, u8 device, u8 function)
+{
+ u32 start_address;
+ u32 address[] = {
+ PCI_BASE_ADDRESS_0,
+ PCI_BASE_ADDRESS_1,
+ PCI_BASE_ADDRESS_2,
+ PCI_BASE_ADDRESS_3,
+ PCI_BASE_ADDRESS_4,
+ PCI_BASE_ADDRESS_5,
+ 0
+ };
+ int count;
+ struct resource_node *io;
+ struct resource_node *mem;
+ struct resource_node *pfmem;
+ struct bus_node *bus;
+ u32 end_address;
+ u32 temp_end;
+ u32 size;
+ u32 tmp_address;
+ unsigned int devfn;
+
+ debug ("%s - enter\n", __func__);
+
+ bus = ibmphp_find_res_bus (busno);
+ if (!bus) {
+ debug ("cannot find corresponding bus.\n");
+ return -EINVAL;
+ }
+
+ devfn = PCI_DEVFN(device, function);
+ ibmphp_pci_bus->number = busno;
+ for (count = 0; address[count]; count++) { /* for 6 BARs */
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &start_address);
+
+ /* We can do this here, b/c by that time the device driver of the card has been stopped */
+
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF);
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &size);
+ pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], start_address);
+
+ debug ("start_address is %x\n", start_address);
+ debug ("busno, device, function %x %x %x\n", busno, device, function);
+ if (!size) {
+ /* This BAR is not implemented */
+ debug ("is this bar no implemented?, count = %d\n", count);
+ continue;
+ }
+ tmp_address = start_address;
+ if (start_address & PCI_BASE_ADDRESS_SPACE_IO) {
+ /* This is IO */
+ start_address &= PCI_BASE_ADDRESS_IO_MASK;
+ size = size & 0xFFFFFFFC;
+ size = ~size + 1;
+ end_address = start_address + size - 1;
+ if (ibmphp_find_resource (bus, start_address, &io, IO) < 0) {
+ err ("cannot find corresponding IO resource to remove\n");
+ return -EIO;
+ }
+ debug ("io->start = %x\n", io->start);
+ temp_end = io->end;
+ start_address = io->end + 1;
+ ibmphp_remove_resource (io);
+ /* This is needed b/c of the old I/O restrictions in the BIOS */
+ while (temp_end < end_address) {
+ if (ibmphp_find_resource (bus, start_address, &io, IO) < 0) {
+ err ("cannot find corresponding IO resource to remove\n");
+ return -EIO;
+ }
+ debug ("io->start = %x\n", io->start);
+ temp_end = io->end;
+ start_address = io->end + 1;
+ ibmphp_remove_resource (io);
+ }
+
+ /* ????????? DO WE NEED TO WRITE ANYTHING INTO THE PCI CONFIG SPACE BACK ?????????? */
+ } else {
+ /* This is Memory */
+ if (start_address & PCI_BASE_ADDRESS_MEM_PREFETCH) {
+ /* pfmem */
+ debug ("start address of pfmem is %x\n", start_address);
+ start_address &= PCI_BASE_ADDRESS_MEM_MASK;
+
+ if (ibmphp_find_resource (bus, start_address, &pfmem, PFMEM) < 0) {
+ err ("cannot find corresponding PFMEM resource to remove\n");
+ return -EIO;
+ }
+ if (pfmem) {
+ debug ("pfmem->start = %x\n", pfmem->start);
+
+ ibmphp_remove_resource(pfmem);
+ }
+ } else {
+ /* regular memory */
+ debug ("start address of mem is %x\n", start_address);
+ start_address &= PCI_BASE_ADDRESS_MEM_MASK;
+
+ if (ibmphp_find_resource (bus, start_address, &mem, MEM) < 0) {
+ err ("cannot find corresponding MEM resource to remove\n");
+ return -EIO;
+ }
+ if (mem) {
+ debug ("mem->start = %x\n", mem->start);
+
+ ibmphp_remove_resource(mem);
+ }
+ }
+ if (tmp_address & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ /* takes up another dword */
+ count += 1;
+ }
+ } /* end of mem */
+ } /* end of for */
+
+ return 0;
+}
+
+static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function)
+{
+ int count;
+ int bus_no, pri_no, sub_no, sec_no = 0;
+ u32 start_address, tmp_address;
+ u8 sec_number, sub_number, pri_number;
+ struct resource_node *io = NULL;
+ struct resource_node *mem = NULL;
+ struct resource_node *pfmem = NULL;
+ struct bus_node *bus;
+ u32 address[] = {
+ PCI_BASE_ADDRESS_0,
+ PCI_BASE_ADDRESS_1,
+ 0
+ };
+ unsigned int devfn;
+
+ devfn = PCI_DEVFN(device, function);
+ ibmphp_pci_bus->number = busno;
+ bus_no = (int) busno;
+ debug ("busno is %x\n", busno);
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, &pri_number);
+ debug ("%s - busno = %x, primary_number = %x\n", __func__, busno, pri_number);
+
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number);
+ debug ("sec_number is %x\n", sec_number);
+ sec_no = (int) sec_number;
+ pri_no = (int) pri_number;
+ if (pri_no != bus_no) {
+ err ("primary numbers in our structures and pci config space don't match.\n");
+ return -EINVAL;
+ }
+
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, &sub_number);
+ sub_no = (int) sub_number;
+ debug ("sub_no is %d, sec_no is %d\n", sub_no, sec_no);
+ if (sec_no != sub_number) {
+ err ("there're more buses behind this bridge. Hot removal is not supported. Please choose another card\n");
+ return -ENODEV;
+ }
+
+ bus = ibmphp_find_res_bus (sec_number);
+ if (!bus) {
+ err ("cannot find Bus structure for the bridged device\n");
+ return -EINVAL;
+ }
+ debug("bus->busno is %x\n", bus->busno);
+ debug("sec_number is %x\n", sec_number);
+
+ ibmphp_remove_bus (bus, busno);
+
+ for (count = 0; address[count]; count++) {
+ /* for 2 BARs */
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &start_address);
+
+ if (!start_address) {
+ /* This BAR is not implemented */
+ continue;
+ }
+
+ tmp_address = start_address;
+
+ if (start_address & PCI_BASE_ADDRESS_SPACE_IO) {
+ /* This is IO */
+ start_address &= PCI_BASE_ADDRESS_IO_MASK;
+ if (ibmphp_find_resource (bus, start_address, &io, IO) < 0) {
+ err ("cannot find corresponding IO resource to remove\n");
+ return -EIO;
+ }
+ if (io)
+ debug ("io->start = %x\n", io->start);
+
+ ibmphp_remove_resource (io);
+
+ /* ????????? DO WE NEED TO WRITE ANYTHING INTO THE PCI CONFIG SPACE BACK ?????????? */
+ } else {
+ /* This is Memory */
+ if (start_address & PCI_BASE_ADDRESS_MEM_PREFETCH) {
+ /* pfmem */
+ start_address &= PCI_BASE_ADDRESS_MEM_MASK;
+ if (ibmphp_find_resource (bus, start_address, &pfmem, PFMEM) < 0) {
+ err ("cannot find corresponding PFMEM resource to remove\n");
+ return -EINVAL;
+ }
+ if (pfmem) {
+ debug ("pfmem->start = %x\n", pfmem->start);
+
+ ibmphp_remove_resource(pfmem);
+ }
+ } else {
+ /* regular memory */
+ start_address &= PCI_BASE_ADDRESS_MEM_MASK;
+ if (ibmphp_find_resource (bus, start_address, &mem, MEM) < 0) {
+ err ("cannot find corresponding MEM resource to remove\n");
+ return -EINVAL;
+ }
+ if (mem) {
+ debug ("mem->start = %x\n", mem->start);
+
+ ibmphp_remove_resource(mem);
+ }
+ }
+ if (tmp_address & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ /* takes up another dword */
+ count += 1;
+ }
+ } /* end of mem */
+ } /* end of for */
+ debug ("%s - exiting, returning success\n", __func__);
+ return 0;
+}
+
+static int unconfigure_boot_card (struct slot *slot_cur)
+{
+ u16 vendor_id;
+ u32 class;
+ u8 hdr_type;
+ u8 device;
+ u8 busno;
+ u8 function;
+ int rc;
+ unsigned int devfn;
+ u8 valid_device = 0x00; /* To see if we are ever able to find valid device and read it */
+
+ debug ("%s - enter\n", __func__);
+
+ device = slot_cur->device;
+ busno = slot_cur->bus;
+
+ debug ("b4 for loop, device is %x\n", device);
+ /* For every function on the card */
+ for (function = 0x0; function < 0x08; function++) {
+ devfn = PCI_DEVFN(device, function);
+ ibmphp_pci_bus->number = busno;
+
+ pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id);
+
+ if (vendor_id != PCI_VENDOR_ID_NOTVALID) {
+ /* found correct device!!! */
+ ++valid_device;
+
+ debug ("%s - found correct device\n", __func__);
+
+ /* header: x x x x x x x x
+ * | |___________|=> 1=PPB bridge, 0=normal device, 2=CardBus Bridge
+ * |_=> 0 = single function device, 1 = multi-function device
+ */
+
+ pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type);
+ pci_bus_read_config_dword (ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class);
+
+ debug ("hdr_type %x, class %x\n", hdr_type, class);
+ class >>= 8; /* to take revision out, class = class.subclass.prog i/f */
+ if (class == PCI_CLASS_NOT_DEFINED_VGA) {
+ err ("The device %x function %x is VGA compatible and is not supported for hot removing. Please choose another device.\n", device, function);
+ return -ENODEV;
+ } else if (class == PCI_CLASS_DISPLAY_VGA) {
+ err ("The device %x function %x is not supported for hot removing. Please choose another device.\n", device, function);
+ return -ENODEV;
+ }
+
+ switch (hdr_type) {
+ case PCI_HEADER_TYPE_NORMAL:
+ rc = unconfigure_boot_device (busno, device, function);
+ if (rc) {
+ err ("was not able to unconfigure device %x func %x on bus %x. bailing out...\n",
+ device, function, busno);
+ return rc;
+ }
+ function = 0x8;
+ break;
+ case PCI_HEADER_TYPE_MULTIDEVICE:
+ rc = unconfigure_boot_device (busno, device, function);
+ if (rc) {
+ err ("was not able to unconfigure device %x func %x on bus %x. bailing out...\n",
+ device, function, busno);
+ return rc;
+ }
+ break;
+ case PCI_HEADER_TYPE_BRIDGE:
+ class >>= 8;
+ if (class != PCI_CLASS_BRIDGE_PCI) {
+ err ("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function);
+ return -ENODEV;
+ }
+ rc = unconfigure_boot_bridge (busno, device, function);
+ if (rc != 0) {
+ err ("was not able to hot-remove PPB properly.\n");
+ return rc;
+ }
+
+ function = 0x8;
+ break;
+ case PCI_HEADER_TYPE_MULTIBRIDGE:
+ class >>= 8;
+ if (class != PCI_CLASS_BRIDGE_PCI) {
+ err ("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function);
+ return -ENODEV;
+ }
+ rc = unconfigure_boot_bridge (busno, device, function);
+ if (rc != 0) {
+ err ("was not able to hot-remove PPB properly.\n");
+ return rc;
+ }
+ break;
+ default:
+ err ("MAJOR PROBLEM!!!! Cannot read device's header\n");
+ return -1;
+ break;
+ } /* end of switch */
+ } /* end of valid device */
+ } /* end of for */
+
+ if (!valid_device) {
+ err ("Could not find device to unconfigure. Or could not read the card.\n");
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * free the resources of the card (multi, single, or bridged)
+ * Parameters: slot, flag to say if this is for removing entire module or just
+ * unconfiguring the device
+ * TO DO: will probably need to add some code in case there was some resource,
+ * to remove it... this is from when we have errors in the configure_card...
+ * !!!!!!!!!!!!!!!!!!!!!!!!!FOR BUSES!!!!!!!!!!!!
+ * Returns: 0, -1, -ENODEV
+ */
+int ibmphp_unconfigure_card (struct slot **slot_cur, int the_end)
+{
+ int i;
+ int count;
+ int rc;
+ struct slot *sl = *slot_cur;
+ struct pci_func *cur_func = NULL;
+ struct pci_func *temp_func;
+
+ debug ("%s - enter\n", __func__);
+
+ if (!the_end) {
+ /* Need to unconfigure the card */
+ rc = unconfigure_boot_card (sl);
+ if ((rc == -ENODEV) || (rc == -EIO) || (rc == -EINVAL)) {
+ /* In all other cases, will still need to get rid of func structure if it exists */
+ return rc;
+ }
+ }
+
+ if (sl->func) {
+ cur_func = sl->func;
+ while (cur_func) {
+ /* TO DO: WILL MOST LIKELY NEED TO GET RID OF THE BUS STRUCTURE FROM RESOURCES AS WELL */
+ if (cur_func->bus) {
+ /* in other words, it's a PPB */
+ count = 2;
+ } else {
+ count = 6;
+ }
+
+ for (i = 0; i < count; i++) {
+ if (cur_func->io[i]) {
+ debug ("io[%d] exists\n", i);
+ if (the_end > 0)
+ ibmphp_remove_resource (cur_func->io[i]);
+ cur_func->io[i] = NULL;
+ }
+ if (cur_func->mem[i]) {
+ debug ("mem[%d] exists\n", i);
+ if (the_end > 0)
+ ibmphp_remove_resource (cur_func->mem[i]);
+ cur_func->mem[i] = NULL;
+ }
+ if (cur_func->pfmem[i]) {
+ debug ("pfmem[%d] exists\n", i);
+ if (the_end > 0)
+ ibmphp_remove_resource (cur_func->pfmem[i]);
+ cur_func->pfmem[i] = NULL;
+ }
+ }
+
+ temp_func = cur_func->next;
+ kfree (cur_func);
+ cur_func = temp_func;
+ }
+ }
+
+ sl->func = NULL;
+ *slot_cur = sl;
+ debug ("%s - exit\n", __func__);
+ return 0;
+}
+
+/*
+ * add a new bus resulting from hot-plugging a PPB bridge with devices
+ *
+ * Input: bus and the amount of resources needed (we know we can assign those,
+ * since they've been checked already
+ * Output: bus added to the correct spot
+ * 0, -1, error
+ */
+static int add_new_bus (struct bus_node *bus, struct resource_node *io, struct resource_node *mem, struct resource_node *pfmem, u8 parent_busno)
+{
+ struct range_node *io_range = NULL;
+ struct range_node *mem_range = NULL;
+ struct range_node *pfmem_range = NULL;
+ struct bus_node *cur_bus = NULL;
+
+ /* Trying to find the parent bus number */
+ if (parent_busno != 0xFF) {
+ cur_bus = ibmphp_find_res_bus (parent_busno);
+ if (!cur_bus) {
+ err ("strange, cannot find bus which is supposed to be at the system... something is terribly wrong...\n");
+ return -ENODEV;
+ }
+
+ list_add (&bus->bus_list, &cur_bus->bus_list);
+ }
+ if (io) {
+ io_range = kzalloc(sizeof(*io_range), GFP_KERNEL);
+ if (!io_range) {
+ err ("out of system memory\n");
+ return -ENOMEM;
+ }
+ io_range->start = io->start;
+ io_range->end = io->end;
+ io_range->rangeno = 1;
+ bus->noIORanges = 1;
+ bus->rangeIO = io_range;
+ }
+ if (mem) {
+ mem_range = kzalloc(sizeof(*mem_range), GFP_KERNEL);
+ if (!mem_range) {
+ err ("out of system memory\n");
+ return -ENOMEM;
+ }
+ mem_range->start = mem->start;
+ mem_range->end = mem->end;
+ mem_range->rangeno = 1;
+ bus->noMemRanges = 1;
+ bus->rangeMem = mem_range;
+ }
+ if (pfmem) {
+ pfmem_range = kzalloc(sizeof(*pfmem_range), GFP_KERNEL);
+ if (!pfmem_range) {
+ err ("out of system memory\n");
+ return -ENOMEM;
+ }
+ pfmem_range->start = pfmem->start;
+ pfmem_range->end = pfmem->end;
+ pfmem_range->rangeno = 1;
+ bus->noPFMemRanges = 1;
+ bus->rangePFMem = pfmem_range;
+ }
+ return 0;
+}
+
+/*
+ * find the 1st available bus number for PPB to set as its secondary bus
+ * Parameters: bus_number of the primary bus
+ * Returns: bus_number of the secondary bus or 0xff in case of failure
+ */
+static u8 find_sec_number (u8 primary_busno, u8 slotno)
+{
+ int min, max;
+ u8 busno;
+ struct bus_info *bus;
+ struct bus_node *bus_cur;
+
+ bus = ibmphp_find_same_bus_num (primary_busno);
+ if (!bus) {
+ err ("cannot get slot range of the bus from the BIOS\n");
+ return 0xff;
+ }
+ max = bus->slot_max;
+ min = bus->slot_min;
+ if ((slotno > max) || (slotno < min)) {
+ err ("got the wrong range\n");
+ return 0xff;
+ }
+ busno = (u8) (slotno - (u8) min);
+ busno += primary_busno + 0x01;
+ bus_cur = ibmphp_find_res_bus (busno);
+ /* either there is no such bus number, or there are no ranges, which
+ * can only happen if we removed the bridged device in previous load
+ * of the driver, and now only have the skeleton bus struct
+ */
+ if ((!bus_cur) || (!(bus_cur->rangeIO) && !(bus_cur->rangeMem) && !(bus_cur->rangePFMem)))
+ return busno;
+ return 0xff;
+}