1 files changed, 75 insertions, 6 deletions

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8361d27e5..edb198420 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -6,12 +6,15 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/of_device.h>
 #include <linux/of_pci.h>
 #include <linux/pci_hotplug.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/cpumask.h>
 #include <linux/pci-aspm.h>
+#include <linux/aer.h>
+#include <linux/acpi.h>
 #include <asm-generic/pci-bridge.h>
 #include "pci.h"
 
@@ -1597,6 +1600,9 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
 
 static void pci_init_capabilities(struct pci_dev *dev)
 {
+	/* Enhanced Allocation */
+	pci_ea_init(dev);
+
 	/* MSI/MSI-X list */
 	pci_msi_init_pci_dev(dev);
 
@@ -1620,17 +1626,80 @@ static void pci_init_capabilities(struct pci_dev *dev)
 
 	/* Enable ACS P2P upstream forwarding */
 	pci_enable_acs(dev);
+
+	pci_cleanup_aer_error_status_regs(dev);
+}
+
+/*
+ * This is the equivalent of pci_host_bridge_msi_domain that acts on
+ * devices. Firmware interfaces that can select the MSI domain on a
+ * per-device basis should be called from here.
+ */
+static struct irq_domain *pci_dev_msi_domain(struct pci_dev *dev)
+{
+	struct irq_domain *d;
+
+	/*
+	 * If a domain has been set through the pcibios_add_device
+	 * callback, then this is the one (platform code knows best).
+	 */
+	d = dev_get_msi_domain(&dev->dev);
+	if (d)
+		return d;
+
+	/*
+	 * Let's see if we have a firmware interface able to provide
+	 * the domain.
+	 */
+	d = pci_msi_get_device_domain(dev);
+	if (d)
+		return d;
+
+	return NULL;
 }
 
 static void pci_set_msi_domain(struct pci_dev *dev)
 {
+	struct irq_domain *d;
+
 	/*
-	 * If no domain has been set through the pcibios_add_device
-	 * callback, inherit the default from the bus device.
+	 * If the platform or firmware interfaces cannot supply a
+	 * device-specific MSI domain, then inherit the default domain
+	 * from the host bridge itself.
 	 */
-	if (!dev_get_msi_domain(&dev->dev))
-		dev_set_msi_domain(&dev->dev,
-				   dev_get_msi_domain(&dev->bus->dev));
+	d = pci_dev_msi_domain(dev);
+	if (!d)
+		d = dev_get_msi_domain(&dev->bus->dev);
+
+	dev_set_msi_domain(&dev->dev, d);
+}
+
+/**
+ * pci_dma_configure - Setup DMA configuration
+ * @dev: ptr to pci_dev struct of the PCI device
+ *
+ * Function to update PCI devices's DMA configuration using the same
+ * info from the OF node or ACPI node of host bridge's parent (if any).
+ */
+static void pci_dma_configure(struct pci_dev *dev)
+{
+	struct device *bridge = pci_get_host_bridge_device(dev);
+
+	if (IS_ENABLED(CONFIG_OF) &&
+		bridge->parent && bridge->parent->of_node) {
+			of_dma_configure(&dev->dev, bridge->parent->of_node);
+	} else if (has_acpi_companion(bridge)) {
+		struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
+		enum dev_dma_attr attr = acpi_get_dma_attr(adev);
+
+		if (attr == DEV_DMA_NOT_SUPPORTED)
+			dev_warn(&dev->dev, "DMA not supported.\n");
+		else
+			arch_setup_dma_ops(&dev->dev, 0, 0, NULL,
+					   attr == DEV_DMA_COHERENT);
+	}
+
+	pci_put_host_bridge_device(bridge);
 }
 
 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
@@ -1646,7 +1715,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
 	dev->dev.dma_mask = &dev->dma_mask;
 	dev->dev.dma_parms = &dev->dma_parms;
 	dev->dev.coherent_dma_mask = 0xffffffffull;
-	of_pci_dma_configure(dev);
+	pci_dma_configure(dev);
 
 	pci_set_dma_max_seg_size(dev, 65536);
 	pci_set_dma_seg_boundary(dev, 0xffffffff);