diff options
Diffstat (limited to 'drivers/pinctrl/nomadik/pinctrl-abx500.c')
| -rw-r--r-- | drivers/pinctrl/nomadik/pinctrl-abx500.c | 1296 |
1 files changed, 1296 insertions, 0 deletions
diff --git a/drivers/pinctrl/nomadik/pinctrl-abx500.c b/drivers/pinctrl/nomadik/pinctrl-abx500.c new file mode 100644 index 000000000..23db4c9ac --- /dev/null +++ b/drivers/pinctrl/nomadik/pinctrl-abx500.c @@ -0,0 +1,1296 @@ +/* + * Copyright (C) ST-Ericsson SA 2013 + * + * Author: Patrice Chotard <patrice.chotard@st.com> + * License terms: GNU General Public License (GPL) version 2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/machine.h> + +#include "pinctrl-abx500.h" +#include "../core.h" +#include "../pinconf.h" +#include "../pinctrl-utils.h" + +/* + * The AB9540 and AB8540 GPIO support are extended versions + * of the AB8500 GPIO support. + * The AB9540 supports an additional (7th) register so that + * more GPIO may be configured and used. + * The AB8540 supports 4 new gpios (GPIOx_VBAT) that have + * internal pull-up and pull-down capabilities. + */ + +/* + * GPIO registers offset + * Bank: 0x10 + */ +#define AB8500_GPIO_SEL1_REG 0x00 +#define AB8500_GPIO_SEL2_REG 0x01 +#define AB8500_GPIO_SEL3_REG 0x02 +#define AB8500_GPIO_SEL4_REG 0x03 +#define AB8500_GPIO_SEL5_REG 0x04 +#define AB8500_GPIO_SEL6_REG 0x05 +#define AB9540_GPIO_SEL7_REG 0x06 + +#define AB8500_GPIO_DIR1_REG 0x10 +#define AB8500_GPIO_DIR2_REG 0x11 +#define AB8500_GPIO_DIR3_REG 0x12 +#define AB8500_GPIO_DIR4_REG 0x13 +#define AB8500_GPIO_DIR5_REG 0x14 +#define AB8500_GPIO_DIR6_REG 0x15 +#define AB9540_GPIO_DIR7_REG 0x16 + +#define AB8500_GPIO_OUT1_REG 0x20 +#define AB8500_GPIO_OUT2_REG 0x21 +#define AB8500_GPIO_OUT3_REG 0x22 +#define AB8500_GPIO_OUT4_REG 0x23 +#define AB8500_GPIO_OUT5_REG 0x24 +#define AB8500_GPIO_OUT6_REG 0x25 +#define AB9540_GPIO_OUT7_REG 0x26 + +#define AB8500_GPIO_PUD1_REG 0x30 +#define AB8500_GPIO_PUD2_REG 0x31 +#define AB8500_GPIO_PUD3_REG 0x32 +#define AB8500_GPIO_PUD4_REG 0x33 +#define AB8500_GPIO_PUD5_REG 0x34 +#define AB8500_GPIO_PUD6_REG 0x35 +#define AB9540_GPIO_PUD7_REG 0x36 + +#define AB8500_GPIO_IN1_REG 0x40 +#define AB8500_GPIO_IN2_REG 0x41 +#define AB8500_GPIO_IN3_REG 0x42 +#define AB8500_GPIO_IN4_REG 0x43 +#define AB8500_GPIO_IN5_REG 0x44 +#define AB8500_GPIO_IN6_REG 0x45 +#define AB9540_GPIO_IN7_REG 0x46 +#define AB8540_GPIO_VINSEL_REG 0x47 +#define AB8540_GPIO_PULL_UPDOWN_REG 0x48 +#define AB8500_GPIO_ALTFUN_REG 0x50 +#define AB8540_GPIO_PULL_UPDOWN_MASK 0x03 +#define AB8540_GPIO_VINSEL_MASK 0x03 +#define AB8540_GPIOX_VBAT_START 51 +#define AB8540_GPIOX_VBAT_END 54 + +#define ABX500_GPIO_INPUT 0 +#define ABX500_GPIO_OUTPUT 1 + +struct abx500_pinctrl { + struct device *dev; + struct pinctrl_dev *pctldev; + struct abx500_pinctrl_soc_data *soc; + struct gpio_chip chip; + struct ab8500 *parent; + struct abx500_gpio_irq_cluster *irq_cluster; + int irq_cluster_size; +}; + +/** + * to_abx500_pinctrl() - get the pointer to abx500_pinctrl + * @chip: Member of the structure abx500_pinctrl + */ +static inline struct abx500_pinctrl *to_abx500_pinctrl(struct gpio_chip *chip) +{ + return container_of(chip, struct abx500_pinctrl, chip); +} + +static int abx500_gpio_get_bit(struct gpio_chip *chip, u8 reg, + unsigned offset, bool *bit) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + u8 pos = offset % 8; + u8 val; + int ret; + + reg += offset / 8; + ret = abx500_get_register_interruptible(pct->dev, + AB8500_MISC, reg, &val); + + *bit = !!(val & BIT(pos)); + + if (ret < 0) + dev_err(pct->dev, + "%s read reg =%x, offset=%x failed (%d)\n", + __func__, reg, offset, ret); + + return ret; +} + +static int abx500_gpio_set_bits(struct gpio_chip *chip, u8 reg, + unsigned offset, int val) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + u8 pos = offset % 8; + int ret; + + reg += offset / 8; + ret = abx500_mask_and_set_register_interruptible(pct->dev, + AB8500_MISC, reg, BIT(pos), val << pos); + if (ret < 0) + dev_err(pct->dev, "%s write reg, %x offset %x failed (%d)\n", + __func__, reg, offset, ret); + + return ret; +} + +/** + * abx500_gpio_get() - Get the particular GPIO value + * @chip: Gpio device + * @offset: GPIO number to read + */ +static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + bool bit; + bool is_out; + u8 gpio_offset = offset - 1; + int ret; + + ret = abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG, + gpio_offset, &is_out); + if (ret < 0) + goto out; + + if (is_out) + ret = abx500_gpio_get_bit(chip, AB8500_GPIO_OUT1_REG, + gpio_offset, &bit); + else + ret = abx500_gpio_get_bit(chip, AB8500_GPIO_IN1_REG, + gpio_offset, &bit); +out: + if (ret < 0) { + dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); + return ret; + } + + return bit; +} + +static void abx500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + int ret; + + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); + if (ret < 0) + dev_err(pct->dev, "%s write failed (%d)\n", __func__, ret); +} + +static int abx500_get_pull_updown(struct abx500_pinctrl *pct, int offset, + enum abx500_gpio_pull_updown *pull_updown) +{ + u8 pos; + u8 val; + int ret; + struct pullud *pullud; + + if (!pct->soc->pullud) { + dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature", + __func__); + ret = -EPERM; + goto out; + } + + pullud = pct->soc->pullud; + + if ((offset < pullud->first_pin) + || (offset > pullud->last_pin)) { + ret = -EINVAL; + goto out; + } + + ret = abx500_get_register_interruptible(pct->dev, + AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG, &val); + + pos = (offset - pullud->first_pin) << 1; + *pull_updown = (val >> pos) & AB8540_GPIO_PULL_UPDOWN_MASK; + +out: + if (ret < 0) + dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); + + return ret; +} + +static int abx500_set_pull_updown(struct abx500_pinctrl *pct, + int offset, enum abx500_gpio_pull_updown val) +{ + u8 pos; + int ret; + struct pullud *pullud; + + if (!pct->soc->pullud) { + dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature", + __func__); + ret = -EPERM; + goto out; + } + + pullud = pct->soc->pullud; + + if ((offset < pullud->first_pin) + || (offset > pullud->last_pin)) { + ret = -EINVAL; + goto out; + } + pos = (offset - pullud->first_pin) << 1; + + ret = abx500_mask_and_set_register_interruptible(pct->dev, + AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG, + AB8540_GPIO_PULL_UPDOWN_MASK << pos, val << pos); + +out: + if (ret < 0) + dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); + + return ret; +} + +static bool abx500_pullud_supported(struct gpio_chip *chip, unsigned gpio) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + struct pullud *pullud = pct->soc->pullud; + + return (pullud && + gpio >= pullud->first_pin && + gpio <= pullud->last_pin); +} + +static int abx500_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, + int val) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + unsigned gpio; + int ret; + + /* set direction as output */ + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_DIR1_REG, + offset, + ABX500_GPIO_OUTPUT); + if (ret < 0) + goto out; + + /* disable pull down */ + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_PUD1_REG, + offset, + ABX500_GPIO_PULL_NONE); + if (ret < 0) + goto out; + + /* if supported, disable both pull down and pull up */ + gpio = offset + 1; + if (abx500_pullud_supported(chip, gpio)) { + ret = abx500_set_pull_updown(pct, + gpio, + ABX500_GPIO_PULL_NONE); + } +out: + if (ret < 0) { + dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); + return ret; + } + + /* set the output as 1 or 0 */ + return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); +} + +static int abx500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + /* set the register as input */ + return abx500_gpio_set_bits(chip, + AB8500_GPIO_DIR1_REG, + offset, + ABX500_GPIO_INPUT); +} + +static int abx500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + /* The AB8500 GPIO numbers are off by one */ + int gpio = offset + 1; + int hwirq; + int i; + + for (i = 0; i < pct->irq_cluster_size; i++) { + struct abx500_gpio_irq_cluster *cluster = + &pct->irq_cluster[i]; + + if (gpio >= cluster->start && gpio <= cluster->end) { + /* + * The ABx500 GPIO's associated IRQs are clustered together + * throughout the interrupt numbers at irregular intervals. + * To solve this quandry, we have placed the read-in values + * into the cluster information table. + */ + hwirq = gpio - cluster->start + cluster->to_irq; + return irq_create_mapping(pct->parent->domain, hwirq); + } + } + + return -EINVAL; +} + +static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, + unsigned gpio, int alt_setting) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + struct alternate_functions af = pct->soc->alternate_functions[gpio]; + int ret; + int val; + unsigned offset; + + const char *modes[] = { + [ABX500_DEFAULT] = "default", + [ABX500_ALT_A] = "altA", + [ABX500_ALT_B] = "altB", + [ABX500_ALT_C] = "altC", + }; + + /* sanity check */ + if (((alt_setting == ABX500_ALT_A) && (af.gpiosel_bit == UNUSED)) || + ((alt_setting == ABX500_ALT_B) && (af.alt_bit1 == UNUSED)) || + ((alt_setting == ABX500_ALT_C) && (af.alt_bit2 == UNUSED))) { + dev_dbg(pct->dev, "pin %d doesn't support %s mode\n", gpio, + modes[alt_setting]); + return -EINVAL; + } + + /* on ABx5xx, there is no GPIO0, so adjust the offset */ + offset = gpio - 1; + + switch (alt_setting) { + case ABX500_DEFAULT: + /* + * for ABx5xx family, default mode is always selected by + * writing 0 to GPIOSELx register, except for pins which + * support at least ALT_B mode, default mode is selected + * by writing 1 to GPIOSELx register + */ + val = 0; + if (af.alt_bit1 != UNUSED) + val++; + + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, + offset, val); + break; + + case ABX500_ALT_A: + /* + * for ABx5xx family, alt_a mode is always selected by + * writing 1 to GPIOSELx register, except for pins which + * support at least ALT_B mode, alt_a mode is selected + * by writing 0 to GPIOSELx register and 0 in ALTFUNC + * register + */ + if (af.alt_bit1 != UNUSED) { + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, + offset, 0); + if (ret < 0) + goto out; + + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_ALTFUN_REG, + af.alt_bit1, + !!(af.alta_val & BIT(0))); + if (ret < 0) + goto out; + + if (af.alt_bit2 != UNUSED) + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_ALTFUN_REG, + af.alt_bit2, + !!(af.alta_val & BIT(1))); + } else + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, + offset, 1); + break; + + case ABX500_ALT_B: + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, + offset, 0); + if (ret < 0) + goto out; + + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, + af.alt_bit1, !!(af.altb_val & BIT(0))); + if (ret < 0) + goto out; + + if (af.alt_bit2 != UNUSED) + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_ALTFUN_REG, + af.alt_bit2, + !!(af.altb_val & BIT(1))); + break; + + case ABX500_ALT_C: + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, + offset, 0); + if (ret < 0) + goto out; + + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, + af.alt_bit2, !!(af.altc_val & BIT(0))); + if (ret < 0) + goto out; + + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, + af.alt_bit2, !!(af.altc_val & BIT(1))); + break; + + default: + dev_dbg(pct->dev, "unknown alt_setting %d\n", alt_setting); + + return -EINVAL; + } +out: + if (ret < 0) + dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); + + return ret; +} + +static int abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, + unsigned gpio) +{ + u8 mode; + bool bit_mode; + bool alt_bit1; + bool alt_bit2; + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + struct alternate_functions af = pct->soc->alternate_functions[gpio]; + /* on ABx5xx, there is no GPIO0, so adjust the offset */ + unsigned offset = gpio - 1; + int ret; + + /* + * if gpiosel_bit is set to unused, + * it means no GPIO or special case + */ + if (af.gpiosel_bit == UNUSED) + return ABX500_DEFAULT; + + /* read GpioSelx register */ + ret = abx500_gpio_get_bit(chip, AB8500_GPIO_SEL1_REG + (offset / 8), + af.gpiosel_bit, &bit_mode); + if (ret < 0) + goto out; + + mode = bit_mode; + + /* sanity check */ + if ((af.alt_bit1 < UNUSED) || (af.alt_bit1 > 7) || + (af.alt_bit2 < UNUSED) || (af.alt_bit2 > 7)) { + dev_err(pct->dev, + "alt_bitX value not in correct range (-1 to 7)\n"); + return -EINVAL; + } + + /* if alt_bit2 is used, alt_bit1 must be used too */ + if ((af.alt_bit2 != UNUSED) && (af.alt_bit1 == UNUSED)) { + dev_err(pct->dev, + "if alt_bit2 is used, alt_bit1 can't be unused\n"); + return -EINVAL; + } + + /* check if pin use AlternateFunction register */ + if ((af.alt_bit1 == UNUSED) && (af.alt_bit2 == UNUSED)) + return mode; + /* + * if pin GPIOSEL bit is set and pin supports alternate function, + * it means DEFAULT mode + */ + if (mode) + return ABX500_DEFAULT; + + /* + * pin use the AlternatFunction register + * read alt_bit1 value + */ + ret = abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, + af.alt_bit1, &alt_bit1); + if (ret < 0) + goto out; + + if (af.alt_bit2 != UNUSED) { + /* read alt_bit2 value */ + ret = abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, + af.alt_bit2, + &alt_bit2); + if (ret < 0) + goto out; + } else + alt_bit2 = 0; + + mode = (alt_bit2 << 1) + alt_bit1; + if (mode == af.alta_val) + return ABX500_ALT_A; + else if (mode == af.altb_val) + return ABX500_ALT_B; + else + return ABX500_ALT_C; + +out: + dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); + return ret; +} + +#ifdef CONFIG_DEBUG_FS + +#include <linux/seq_file.h> + +static void abx500_gpio_dbg_show_one(struct seq_file *s, + struct pinctrl_dev *pctldev, + struct gpio_chip *chip, + unsigned offset, unsigned gpio) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + const char *label = gpiochip_is_requested(chip, offset - 1); + u8 gpio_offset = offset - 1; + int mode = -1; + bool is_out; + bool pd; + enum abx500_gpio_pull_updown pud = 0; + int ret; + + const char *modes[] = { + [ABX500_DEFAULT] = "default", + [ABX500_ALT_A] = "altA", + [ABX500_ALT_B] = "altB", + [ABX500_ALT_C] = "altC", + }; + + const char *pull_up_down[] = { + [ABX500_GPIO_PULL_DOWN] = "pull down", + [ABX500_GPIO_PULL_NONE] = "pull none", + [ABX500_GPIO_PULL_NONE + 1] = "pull none", + [ABX500_GPIO_PULL_UP] = "pull up", + }; + + ret = abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG, + gpio_offset, &is_out); + if (ret < 0) + goto out; + + seq_printf(s, " gpio-%-3d (%-20.20s) %-3s", + gpio, label ?: "(none)", + is_out ? "out" : "in "); + + if (!is_out) { + if (abx500_pullud_supported(chip, offset)) { + ret = abx500_get_pull_updown(pct, offset, &pud); + if (ret < 0) + goto out; + + seq_printf(s, " %-9s", pull_up_down[pud]); + } else { + ret = abx500_gpio_get_bit(chip, AB8500_GPIO_PUD1_REG, + gpio_offset, &pd); + if (ret < 0) + goto out; + + seq_printf(s, " %-9s", pull_up_down[pd]); + } + } else + seq_printf(s, " %-9s", chip->get(chip, offset) ? "hi" : "lo"); + + mode = abx500_get_mode(pctldev, chip, offset); + + seq_printf(s, " %s", (mode < 0) ? "unknown" : modes[mode]); + +out: + if (ret < 0) + dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); +} + +static void abx500_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + unsigned i; + unsigned gpio = chip->base; + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + struct pinctrl_dev *pctldev = pct->pctldev; + + for (i = 0; i < chip->ngpio; i++, gpio++) { + /* On AB8500, there is no GPIO0, the first is the GPIO 1 */ + abx500_gpio_dbg_show_one(s, pctldev, chip, i + 1, gpio); + seq_printf(s, "\n"); + } +} + +#else +static inline void abx500_gpio_dbg_show_one(struct seq_file *s, + struct pinctrl_dev *pctldev, + struct gpio_chip *chip, + unsigned offset, unsigned gpio) +{ +} +#define abx500_gpio_dbg_show NULL +#endif + +static int abx500_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + return pinctrl_request_gpio(gpio); +} + +static void abx500_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + pinctrl_free_gpio(gpio); +} + +static struct gpio_chip abx500gpio_chip = { + .label = "abx500-gpio", + .owner = THIS_MODULE, + .request = abx500_gpio_request, + .free = abx500_gpio_free, + .direction_input = abx500_gpio_direction_input, + .get = abx500_gpio_get, + .direction_output = abx500_gpio_direction_output, + .set = abx500_gpio_set, + .to_irq = abx500_gpio_to_irq, + .dbg_show = abx500_gpio_dbg_show, +}; + +static int abx500_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + return pct->soc->nfunctions; +} + +static const char *abx500_pmx_get_func_name(struct pinctrl_dev *pctldev, + unsigned function) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + return pct->soc->functions[function].name; +} + +static int abx500_pmx_get_func_groups(struct pinctrl_dev *pctldev, + unsigned function, + const char * const **groups, + unsigned * const num_groups) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + *groups = pct->soc->functions[function].groups; + *num_groups = pct->soc->functions[function].ngroups; + + return 0; +} + +static int abx500_pmx_set(struct pinctrl_dev *pctldev, unsigned function, + unsigned group) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + struct gpio_chip *chip = &pct->chip; + const struct abx500_pingroup *g; + int i; + int ret = 0; + + g = &pct->soc->groups[group]; + if (g->altsetting < 0) + return -EINVAL; + + dev_dbg(pct->dev, "enable group %s, %u pins\n", g->name, g->npins); + + for (i = 0; i < g->npins; i++) { + dev_dbg(pct->dev, "setting pin %d to altsetting %d\n", + g->pins[i], g->altsetting); + + ret = abx500_set_mode(pctldev, chip, g->pins[i], g->altsetting); + } + + if (ret < 0) + dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); + + return ret; +} + +static int abx500_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + const struct abx500_pinrange *p; + int ret; + int i; + + /* + * Different ranges have different ways to enable GPIO function on a + * pin, so refer back to our local range type, where we handily define + * what altfunc enables GPIO for a certain pin. + */ + for (i = 0; i < pct->soc->gpio_num_ranges; i++) { + p = &pct->soc->gpio_ranges[i]; + if ((offset >= p->offset) && + (offset < (p->offset + p->npins))) + break; + } + + if (i == pct->soc->gpio_num_ranges) { + dev_err(pct->dev, "%s failed to locate range\n", __func__); + return -ENODEV; + } + + dev_dbg(pct->dev, "enable GPIO by altfunc %d at gpio %d\n", + p->altfunc, offset); + + ret = abx500_set_mode(pct->pctldev, &pct->chip, + offset, p->altfunc); + if (ret < 0) + dev_err(pct->dev, "%s setting altfunc failed\n", __func__); + + return ret; +} + +static void abx500_gpio_disable_free(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ +} + +static const struct pinmux_ops abx500_pinmux_ops = { + .get_functions_count = abx500_pmx_get_funcs_cnt, + .get_function_name = abx500_pmx_get_func_name, + .get_function_groups = abx500_pmx_get_func_groups, + .set_mux = abx500_pmx_set, + .gpio_request_enable = abx500_gpio_request_enable, + .gpio_disable_free = abx500_gpio_disable_free, +}; + +static int abx500_get_groups_cnt(struct pinctrl_dev *pctldev) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + return pct->soc->ngroups; +} + +static const char *abx500_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + return pct->soc->groups[selector].name; +} + +static int abx500_get_group_pins(struct pinctrl_dev *pctldev, + unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + *pins = pct->soc->groups[selector].pins; + *num_pins = pct->soc->groups[selector].npins; + + return 0; +} + +static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned offset) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + struct gpio_chip *chip = &pct->chip; + + abx500_gpio_dbg_show_one(s, pctldev, chip, offset, + chip->base + offset - 1); +} + +static int abx500_dt_add_map_mux(struct pinctrl_map **map, + unsigned *reserved_maps, + unsigned *num_maps, const char *group, + const char *function) +{ + if (*num_maps == *reserved_maps) + return -ENOSPC; + + (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP; + (*map)[*num_maps].data.mux.group = group; + (*map)[*num_maps].data.mux.function = function; + (*num_maps)++; + + return 0; +} + +static int abx500_dt_add_map_configs(struct pinctrl_map **map, + unsigned *reserved_maps, + unsigned *num_maps, const char *group, + unsigned long *configs, unsigned num_configs) +{ + unsigned long *dup_configs; + + if (*num_maps == *reserved_maps) + return -ENOSPC; + + dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs), + GFP_KERNEL); + if (!dup_configs) + return -ENOMEM; + + (*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_PIN; + + (*map)[*num_maps].data.configs.group_or_pin = group; + (*map)[*num_maps].data.configs.configs = dup_configs; + (*map)[*num_maps].data.configs.num_configs = num_configs; + (*num_maps)++; + + return 0; +} + +static const char *abx500_find_pin_name(struct pinctrl_dev *pctldev, + const char *pin_name) +{ + int i, pin_number; + struct abx500_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + if (sscanf((char *)pin_name, "GPIO%d", &pin_number) == 1) + for (i = 0; i < npct->soc->npins; i++) + if (npct->soc->pins[i].number == pin_number) + return npct->soc->pins[i].name; + return NULL; +} + +static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned *reserved_maps, + unsigned *num_maps) +{ + int ret; + const char *function = NULL; + unsigned long *configs; + unsigned int nconfigs = 0; + struct property *prop; + + ret = of_property_read_string(np, "function", &function); + if (ret >= 0) { + const char *group; + + ret = of_property_count_strings(np, "groups"); + if (ret < 0) + goto exit; + + ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, + num_maps, ret); + if (ret < 0) + goto exit; + + of_property_for_each_string(np, "groups", prop, group) { + ret = abx500_dt_add_map_mux(map, reserved_maps, + num_maps, group, function); + if (ret < 0) + goto exit; + } + } + + ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, &nconfigs); + if (nconfigs) { + const char *gpio_name; + const char *pin; + + ret = of_property_count_strings(np, "pins"); + if (ret < 0) + goto exit; + + ret = pinctrl_utils_reserve_map(pctldev, map, + reserved_maps, + num_maps, ret); + if (ret < 0) + goto exit; + + of_property_for_each_string(np, "pins", prop, pin) { + gpio_name = abx500_find_pin_name(pctldev, pin); + + ret = abx500_dt_add_map_configs(map, reserved_maps, + num_maps, gpio_name, configs, 1); + if (ret < 0) + goto exit; + } + } + +exit: + return ret; +} + +static int abx500_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, unsigned *num_maps) +{ + unsigned reserved_maps; + struct device_node *np; + int ret; + + reserved_maps = 0; + *map = NULL; + *num_maps = 0; + + for_each_child_of_node(np_config, np) { + ret = abx500_dt_subnode_to_map(pctldev, np, map, + &reserved_maps, num_maps); + if (ret < 0) { + pinctrl_utils_dt_free_map(pctldev, *map, *num_maps); + return ret; + } + } + + return 0; +} + +static const struct pinctrl_ops abx500_pinctrl_ops = { + .get_groups_count = abx500_get_groups_cnt, + .get_group_name = abx500_get_group_name, + .get_group_pins = abx500_get_group_pins, + .pin_dbg_show = abx500_pin_dbg_show, + .dt_node_to_map = abx500_dt_node_to_map, + .dt_free_map = pinctrl_utils_dt_free_map, +}; + +static int abx500_pin_config_get(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *config) +{ + return -ENOSYS; +} + +static int abx500_pin_config_set(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *configs, + unsigned num_configs) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + struct gpio_chip *chip = &pct->chip; + unsigned offset; + int ret = -EINVAL; + int i; + enum pin_config_param param; + enum pin_config_param argument; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + argument = pinconf_to_config_argument(configs[i]); + + dev_dbg(chip->dev, "pin %d [%#lx]: %s %s\n", + pin, configs[i], + (param == PIN_CONFIG_OUTPUT) ? "output " : "input", + (param == PIN_CONFIG_OUTPUT) ? + (argument ? "high" : "low") : + (argument ? "pull up" : "pull down")); + + /* on ABx500, there is no GPIO0, so adjust the offset */ + offset = pin - 1; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + ret = abx500_gpio_direction_input(chip, offset); + if (ret < 0) + goto out; + /* + * Some chips only support pull down, while some + * actually support both pull up and pull down. Such + * chips have a "pullud" range specified for the pins + * that support both features. If the pin is not + * within that range, we fall back to the old bit set + * that only support pull down. + */ + if (abx500_pullud_supported(chip, pin)) + ret = abx500_set_pull_updown(pct, + pin, + ABX500_GPIO_PULL_NONE); + else + /* Chip only supports pull down */ + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_PUD1_REG, offset, + ABX500_GPIO_PULL_NONE); + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + ret = abx500_gpio_direction_input(chip, offset); + if (ret < 0) + goto out; + /* + * if argument = 1 set the pull down + * else clear the pull down + * Some chips only support pull down, while some + * actually support both pull up and pull down. Such + * chips have a "pullud" range specified for the pins + * that support both features. If the pin is not + * within that range, we fall back to the old bit set + * that only support pull down. + */ + if (abx500_pullud_supported(chip, pin)) + ret = abx500_set_pull_updown(pct, + pin, + argument ? ABX500_GPIO_PULL_DOWN : + ABX500_GPIO_PULL_NONE); + else + /* Chip only supports pull down */ + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_PUD1_REG, + offset, + argument ? ABX500_GPIO_PULL_DOWN : + ABX500_GPIO_PULL_NONE); + break; + + case PIN_CONFIG_BIAS_PULL_UP: + ret = abx500_gpio_direction_input(chip, offset); + if (ret < 0) + goto out; + /* + * if argument = 1 set the pull up + * else clear the pull up + */ + ret = abx500_gpio_direction_input(chip, offset); + /* + * Some chips only support pull down, while some + * actually support both pull up and pull down. Such + * chips have a "pullud" range specified for the pins + * that support both features. If the pin is not + * within that range, do nothing + */ + if (abx500_pullud_supported(chip, pin)) + ret = abx500_set_pull_updown(pct, + pin, + argument ? ABX500_GPIO_PULL_UP : + ABX500_GPIO_PULL_NONE); + break; + + case PIN_CONFIG_OUTPUT: + ret = abx500_gpio_direction_output(chip, offset, + argument); + break; + + default: + dev_err(chip->dev, "illegal configuration requested\n"); + } + } /* for each config */ +out: + if (ret < 0) + dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); + + return ret; +} + +static const struct pinconf_ops abx500_pinconf_ops = { + .pin_config_get = abx500_pin_config_get, + .pin_config_set = abx500_pin_config_set, + .is_generic = true, +}; + +static struct pinctrl_desc abx500_pinctrl_desc = { + .name = "pinctrl-abx500", + .pctlops = &abx500_pinctrl_ops, + .pmxops = &abx500_pinmux_ops, + .confops = &abx500_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int abx500_get_gpio_num(struct abx500_pinctrl_soc_data *soc) +{ + unsigned int lowest = 0; + unsigned int highest = 0; + unsigned int npins = 0; + int i; + + /* + * Compute number of GPIOs from the last SoC gpio range descriptors + * These ranges may include "holes" but the GPIO number space shall + * still be homogeneous, so we need to detect and account for any + * such holes so that these are included in the number of GPIO pins. + */ + for (i = 0; i < soc->gpio_num_ranges; i++) { + unsigned gstart; + unsigned gend; + const struct abx500_pinrange *p; + + p = &soc->gpio_ranges[i]; + gstart = p->offset; + gend = p->offset + p->npins - 1; + + if (i == 0) { + /* First iteration, set start values */ + lowest = gstart; + highest = gend; + } else { + if (gstart < lowest) + lowest = gstart; + if (gend > highest) + highest = gend; + } + } + /* this gives the absolute number of pins */ + npins = highest - lowest + 1; + return npins; +} + +static const struct of_device_id abx500_gpio_match[] = { + { .compatible = "stericsson,ab8500-gpio", .data = (void *)PINCTRL_AB8500, }, + { .compatible = "stericsson,ab8505-gpio", .data = (void *)PINCTRL_AB8505, }, + { .compatible = "stericsson,ab8540-gpio", .data = (void *)PINCTRL_AB8540, }, + { .compatible = "stericsson,ab9540-gpio", .data = (void *)PINCTRL_AB9540, }, + { } +}; + +static int abx500_gpio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + struct abx500_pinctrl *pct; + unsigned int id = -1; + int ret; + int i; + + if (!np) { + dev_err(&pdev->dev, "gpio dt node missing\n"); + return -ENODEV; + } + + pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl), + GFP_KERNEL); + if (pct == NULL) { + dev_err(&pdev->dev, + "failed to allocate memory for pct\n"); + return -ENOMEM; + } + + pct->dev = &pdev->dev; + pct->parent = dev_get_drvdata(pdev->dev.parent); + pct->chip = abx500gpio_chip; + pct->chip.dev = &pdev->dev; + pct->chip.base = -1; /* Dynamic allocation */ + + match = of_match_device(abx500_gpio_match, &pdev->dev); + if (!match) { + dev_err(&pdev->dev, "gpio dt not matching\n"); + return -ENODEV; + } + id = (unsigned long)match->data; + + /* Poke in other ASIC variants here */ + switch (id) { + case PINCTRL_AB8500: + abx500_pinctrl_ab8500_init(&pct->soc); + break; + case PINCTRL_AB8540: + abx500_pinctrl_ab8540_init(&pct->soc); + break; + case PINCTRL_AB9540: + abx500_pinctrl_ab9540_init(&pct->soc); + break; + case PINCTRL_AB8505: + abx500_pinctrl_ab8505_init(&pct->soc); + break; + default: + dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", id); + return -EINVAL; + } + + if (!pct->soc) { + dev_err(&pdev->dev, "Invalid SOC data\n"); + return -EINVAL; + } + + pct->chip.ngpio = abx500_get_gpio_num(pct->soc); + pct->irq_cluster = pct->soc->gpio_irq_cluster; + pct->irq_cluster_size = pct->soc->ngpio_irq_cluster; + + ret = gpiochip_add(&pct->chip); + if (ret) { + dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); + return ret; + } + dev_info(&pdev->dev, "added gpiochip\n"); + + abx500_pinctrl_desc.pins = pct->soc->pins; + abx500_pinctrl_desc.npins = pct->soc->npins; + pct->pctldev = pinctrl_register(&abx500_pinctrl_desc, &pdev->dev, pct); + if (!pct->pctldev) { + dev_err(&pdev->dev, + "could not register abx500 pinctrl driver\n"); + ret = -EINVAL; + goto out_rem_chip; + } + dev_info(&pdev->dev, "registered pin controller\n"); + + /* We will handle a range of GPIO pins */ + for (i = 0; i < pct->soc->gpio_num_ranges; i++) { + const struct abx500_pinrange *p = &pct->soc->gpio_ranges[i]; + + ret = gpiochip_add_pin_range(&pct->chip, + dev_name(&pdev->dev), + p->offset - 1, p->offset, p->npins); + if (ret < 0) + goto out_rem_chip; + } + + platform_set_drvdata(pdev, pct); + dev_info(&pdev->dev, "initialized abx500 pinctrl driver\n"); + + return 0; + +out_rem_chip: + gpiochip_remove(&pct->chip); + return ret; +} + +/** + * abx500_gpio_remove() - remove Ab8500-gpio driver + * @pdev: Platform device registered + */ +static int abx500_gpio_remove(struct platform_device *pdev) +{ + struct abx500_pinctrl *pct = platform_get_drvdata(pdev); + + gpiochip_remove(&pct->chip); + return 0; +} + +static struct platform_driver abx500_gpio_driver = { + .driver = { + .name = "abx500-gpio", + .of_match_table = abx500_gpio_match, + }, + .probe = abx500_gpio_probe, + .remove = abx500_gpio_remove, +}; + +static int __init abx500_gpio_init(void) +{ + return platform_driver_register(&abx500_gpio_driver); +} +core_initcall(abx500_gpio_init); + +MODULE_AUTHOR("Patrice Chotard <patrice.chotard@st.com>"); +MODULE_DESCRIPTION("Driver allows to use AxB5xx unused pins to be used as GPIO"); +MODULE_ALIAS("platform:abx500-gpio"); +MODULE_LICENSE("GPL v2"); |