diff options
Diffstat (limited to 'drivers/pps/clients')
| -rw-r--r-- | drivers/pps/clients/Kconfig | 41 | ||||
| -rw-r--r-- | drivers/pps/clients/Makefile | 10 | ||||
| -rw-r--r-- | drivers/pps/clients/pps-gpio.c | 212 | ||||
| -rw-r--r-- | drivers/pps/clients/pps-ktimer.c | 101 | ||||
| -rw-r--r-- | drivers/pps/clients/pps-ldisc.c | 163 | ||||
| -rw-r--r-- | drivers/pps/clients/pps_parport.c | 250 |
6 files changed, 777 insertions, 0 deletions
diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig new file mode 100644 index 000000000..0c9f2805d --- /dev/null +++ b/drivers/pps/clients/Kconfig @@ -0,0 +1,41 @@ +# +# PPS clients configuration +# + +if PPS + +comment "PPS clients support" + +config PPS_CLIENT_KTIMER + tristate "Kernel timer client (Testing client, use for debug)" + help + If you say yes here you get support for a PPS debugging client + which uses a kernel timer to generate the PPS signal. + + This driver can also be built as a module. If so, the module + will be called pps-ktimer. + +config PPS_CLIENT_LDISC + tristate "PPS line discipline" + depends on PPS && TTY + help + If you say yes here you get support for a PPS source connected + with the CD (Carrier Detect) pin of your serial port. + +config PPS_CLIENT_PARPORT + tristate "Parallel port PPS client" + depends on PPS && PARPORT + help + If you say yes here you get support for a PPS source connected + with the interrupt pin of your parallel port. + +config PPS_CLIENT_GPIO + tristate "PPS client using GPIO" + depends on PPS + help + If you say yes here you get support for a PPS source using + GPIO. To be useful you must also register a platform device + specifying the GPIO pin and other options, usually in your board + setup. + +endif diff --git a/drivers/pps/clients/Makefile b/drivers/pps/clients/Makefile new file mode 100644 index 000000000..a461d15f4 --- /dev/null +++ b/drivers/pps/clients/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for PPS clients. +# + +obj-$(CONFIG_PPS_CLIENT_KTIMER) += pps-ktimer.o +obj-$(CONFIG_PPS_CLIENT_LDISC) += pps-ldisc.o +obj-$(CONFIG_PPS_CLIENT_PARPORT) += pps_parport.o +obj-$(CONFIG_PPS_CLIENT_GPIO) += pps-gpio.o + +ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c new file mode 100644 index 000000000..333ad7d5b --- /dev/null +++ b/drivers/pps/clients/pps-gpio.c @@ -0,0 +1,212 @@ +/* + * pps-gpio.c -- PPS client driver using GPIO + * + * + * Copyright (C) 2010 Ricardo Martins <rasm@fe.up.pt> + * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define PPS_GPIO_NAME "pps-gpio" +#define pr_fmt(fmt) PPS_GPIO_NAME ": " fmt + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/pps_kernel.h> +#include <linux/pps-gpio.h> +#include <linux/gpio.h> +#include <linux/list.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> + +/* Info for each registered platform device */ +struct pps_gpio_device_data { + int irq; /* IRQ used as PPS source */ + struct pps_device *pps; /* PPS source device */ + struct pps_source_info info; /* PPS source information */ + bool assert_falling_edge; + bool capture_clear; + unsigned int gpio_pin; +}; + +/* + * Report the PPS event + */ + +static irqreturn_t pps_gpio_irq_handler(int irq, void *data) +{ + const struct pps_gpio_device_data *info; + struct pps_event_time ts; + int rising_edge; + + /* Get the time stamp first */ + pps_get_ts(&ts); + + info = data; + + rising_edge = gpio_get_value(info->gpio_pin); + if ((rising_edge && !info->assert_falling_edge) || + (!rising_edge && info->assert_falling_edge)) + pps_event(info->pps, &ts, PPS_CAPTUREASSERT, NULL); + else if (info->capture_clear && + ((rising_edge && info->assert_falling_edge) || + (!rising_edge && !info->assert_falling_edge))) + pps_event(info->pps, &ts, PPS_CAPTURECLEAR, NULL); + + return IRQ_HANDLED; +} + +static unsigned long +get_irqf_trigger_flags(const struct pps_gpio_device_data *data) +{ + unsigned long flags = data->assert_falling_edge ? + IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING; + + if (data->capture_clear) { + flags |= ((flags & IRQF_TRIGGER_RISING) ? + IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING); + } + + return flags; +} + +static int pps_gpio_probe(struct platform_device *pdev) +{ + struct pps_gpio_device_data *data; + const char *gpio_label; + int ret; + int pps_default_params; + const struct pps_gpio_platform_data *pdata = pdev->dev.platform_data; + struct device_node *np = pdev->dev.of_node; + + /* allocate space for device info */ + data = devm_kzalloc(&pdev->dev, sizeof(struct pps_gpio_device_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + if (pdata) { + data->gpio_pin = pdata->gpio_pin; + gpio_label = pdata->gpio_label; + + data->assert_falling_edge = pdata->assert_falling_edge; + data->capture_clear = pdata->capture_clear; + } else { + ret = of_get_gpio(np, 0); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get GPIO from device tree\n"); + return ret; + } + data->gpio_pin = ret; + gpio_label = PPS_GPIO_NAME; + + if (of_get_property(np, "assert-falling-edge", NULL)) + data->assert_falling_edge = true; + } + + /* GPIO setup */ + ret = devm_gpio_request(&pdev->dev, data->gpio_pin, gpio_label); + if (ret) { + dev_err(&pdev->dev, "failed to request GPIO %u\n", + data->gpio_pin); + return ret; + } + + ret = gpio_direction_input(data->gpio_pin); + if (ret) { + dev_err(&pdev->dev, "failed to set pin direction\n"); + return -EINVAL; + } + + /* IRQ setup */ + ret = gpio_to_irq(data->gpio_pin); + if (ret < 0) { + dev_err(&pdev->dev, "failed to map GPIO to IRQ: %d\n", ret); + return -EINVAL; + } + data->irq = ret; + + /* initialize PPS specific parts of the bookkeeping data structure. */ + data->info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT | + PPS_ECHOASSERT | PPS_CANWAIT | PPS_TSFMT_TSPEC; + if (data->capture_clear) + data->info.mode |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR | + PPS_ECHOCLEAR; + data->info.owner = THIS_MODULE; + snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d", + pdev->name, pdev->id); + + /* register PPS source */ + pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT; + if (data->capture_clear) + pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR; + data->pps = pps_register_source(&data->info, pps_default_params); + if (data->pps == NULL) { + dev_err(&pdev->dev, "failed to register IRQ %d as PPS source\n", + data->irq); + return -EINVAL; + } + + /* register IRQ interrupt handler */ + ret = devm_request_irq(&pdev->dev, data->irq, pps_gpio_irq_handler, + get_irqf_trigger_flags(data), data->info.name, data); + if (ret) { + pps_unregister_source(data->pps); + dev_err(&pdev->dev, "failed to acquire IRQ %d\n", data->irq); + return -EINVAL; + } + + platform_set_drvdata(pdev, data); + dev_info(data->pps->dev, "Registered IRQ %d as PPS source\n", + data->irq); + + return 0; +} + +static int pps_gpio_remove(struct platform_device *pdev) +{ + struct pps_gpio_device_data *data = platform_get_drvdata(pdev); + + pps_unregister_source(data->pps); + dev_info(&pdev->dev, "removed IRQ %d as PPS source\n", data->irq); + return 0; +} + +static const struct of_device_id pps_gpio_dt_ids[] = { + { .compatible = "pps-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, pps_gpio_dt_ids); + +static struct platform_driver pps_gpio_driver = { + .probe = pps_gpio_probe, + .remove = pps_gpio_remove, + .driver = { + .name = PPS_GPIO_NAME, + .of_match_table = pps_gpio_dt_ids, + }, +}; + +module_platform_driver(pps_gpio_driver); +MODULE_AUTHOR("Ricardo Martins <rasm@fe.up.pt>"); +MODULE_AUTHOR("James Nuss <jamesnuss@nanometrics.ca>"); +MODULE_DESCRIPTION("Use GPIO pin as PPS source"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.0.0"); diff --git a/drivers/pps/clients/pps-ktimer.c b/drivers/pps/clients/pps-ktimer.c new file mode 100644 index 000000000..436b4e4e7 --- /dev/null +++ b/drivers/pps/clients/pps-ktimer.c @@ -0,0 +1,101 @@ +/* + * pps-ktimer.c -- kernel timer test client + * + * + * Copyright (C) 2005-2006 Rodolfo Giometti <giometti@linux.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/time.h> +#include <linux/timer.h> +#include <linux/pps_kernel.h> + +/* + * Global variables + */ + +static struct pps_device *pps; +static struct timer_list ktimer; + +/* + * The kernel timer + */ + +static void pps_ktimer_event(unsigned long ptr) +{ + struct pps_event_time ts; + + /* First of all we get the time stamp... */ + pps_get_ts(&ts); + + pps_event(pps, &ts, PPS_CAPTUREASSERT, NULL); + + mod_timer(&ktimer, jiffies + HZ); +} + +/* + * The PPS info struct + */ + +static struct pps_source_info pps_ktimer_info = { + .name = "ktimer", + .path = "", + .mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT | + PPS_ECHOASSERT | + PPS_CANWAIT | PPS_TSFMT_TSPEC, + .owner = THIS_MODULE, +}; + +/* + * Module staff + */ + +static void __exit pps_ktimer_exit(void) +{ + dev_info(pps->dev, "ktimer PPS source unregistered\n"); + + del_timer_sync(&ktimer); + pps_unregister_source(pps); +} + +static int __init pps_ktimer_init(void) +{ + pps = pps_register_source(&pps_ktimer_info, + PPS_CAPTUREASSERT | PPS_OFFSETASSERT); + if (pps == NULL) { + pr_err("cannot register PPS source\n"); + return -ENOMEM; + } + + setup_timer(&ktimer, pps_ktimer_event, 0); + mod_timer(&ktimer, jiffies + HZ); + + dev_info(pps->dev, "ktimer PPS source registered\n"); + + return 0; +} + +module_init(pps_ktimer_init); +module_exit(pps_ktimer_exit); + +MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); +MODULE_DESCRIPTION("dummy PPS source by using a kernel timer (just for debug)"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pps/clients/pps-ldisc.c b/drivers/pps/clients/pps-ldisc.c new file mode 100644 index 000000000..73bd3bb4d --- /dev/null +++ b/drivers/pps/clients/pps-ldisc.c @@ -0,0 +1,163 @@ +/* + * pps-ldisc.c -- PPS line discipline + * + * + * Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/serial_core.h> +#include <linux/tty.h> +#include <linux/pps_kernel.h> +#include <linux/bug.h> + +#define PPS_TTY_MAGIC 0x0001 + +static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status) +{ + struct pps_device *pps; + struct pps_event_time ts; + + pps_get_ts(&ts); + + pps = pps_lookup_dev(tty); + /* + * This should never fail, but the ldisc locking is very + * convoluted, so don't crash just in case. + */ + if (WARN_ON_ONCE(pps == NULL)) + return; + + /* Now do the PPS event report */ + pps_event(pps, &ts, status ? PPS_CAPTUREASSERT : + PPS_CAPTURECLEAR, NULL); + + dev_dbg(pps->dev, "PPS %s at %lu\n", + status ? "assert" : "clear", jiffies); +} + +static int (*alias_n_tty_open)(struct tty_struct *tty); + +static int pps_tty_open(struct tty_struct *tty) +{ + struct pps_source_info info; + struct tty_driver *drv = tty->driver; + int index = tty->index + drv->name_base; + struct pps_device *pps; + int ret; + + info.owner = THIS_MODULE; + info.dev = NULL; + snprintf(info.name, PPS_MAX_NAME_LEN, "%s%d", drv->driver_name, index); + snprintf(info.path, PPS_MAX_NAME_LEN, "/dev/%s%d", drv->name, index); + info.mode = PPS_CAPTUREBOTH | \ + PPS_OFFSETASSERT | PPS_OFFSETCLEAR | \ + PPS_CANWAIT | PPS_TSFMT_TSPEC; + + pps = pps_register_source(&info, PPS_CAPTUREBOTH | \ + PPS_OFFSETASSERT | PPS_OFFSETCLEAR); + if (pps == NULL) { + pr_err("cannot register PPS source \"%s\"\n", info.path); + return -ENOMEM; + } + pps->lookup_cookie = tty; + + /* Now open the base class N_TTY ldisc */ + ret = alias_n_tty_open(tty); + if (ret < 0) { + pr_err("cannot open tty ldisc \"%s\"\n", info.path); + goto err_unregister; + } + + dev_info(pps->dev, "source \"%s\" added\n", info.path); + + return 0; + +err_unregister: + pps_unregister_source(pps); + return ret; +} + +static void (*alias_n_tty_close)(struct tty_struct *tty); + +static void pps_tty_close(struct tty_struct *tty) +{ + struct pps_device *pps = pps_lookup_dev(tty); + + alias_n_tty_close(tty); + + if (WARN_ON(!pps)) + return; + + dev_info(pps->dev, "removed\n"); + pps_unregister_source(pps); +} + +static struct tty_ldisc_ops pps_ldisc_ops; + +/* + * Module stuff + */ + +static int __init pps_tty_init(void) +{ + int err; + + /* Inherit the N_TTY's ops */ + n_tty_inherit_ops(&pps_ldisc_ops); + + /* Save N_TTY's open()/close() methods */ + alias_n_tty_open = pps_ldisc_ops.open; + alias_n_tty_close = pps_ldisc_ops.close; + + /* Init PPS_TTY data */ + pps_ldisc_ops.owner = THIS_MODULE; + pps_ldisc_ops.magic = PPS_TTY_MAGIC; + pps_ldisc_ops.name = "pps_tty"; + pps_ldisc_ops.dcd_change = pps_tty_dcd_change; + pps_ldisc_ops.open = pps_tty_open; + pps_ldisc_ops.close = pps_tty_close; + + err = tty_register_ldisc(N_PPS, &pps_ldisc_ops); + if (err) + pr_err("can't register PPS line discipline\n"); + else + pr_info("PPS line discipline registered\n"); + + return err; +} + +static void __exit pps_tty_cleanup(void) +{ + int err; + + err = tty_unregister_ldisc(N_PPS); + if (err) + pr_err("can't unregister PPS line discipline\n"); + else + pr_info("PPS line discipline removed\n"); +} + +module_init(pps_tty_init); +module_exit(pps_tty_cleanup); + +MODULE_ALIAS_LDISC(N_PPS); +MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); +MODULE_DESCRIPTION("PPS TTY device driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pps/clients/pps_parport.c b/drivers/pps/clients/pps_parport.c new file mode 100644 index 000000000..38a8bbe74 --- /dev/null +++ b/drivers/pps/clients/pps_parport.c @@ -0,0 +1,250 @@ +/* + * pps_parport.c -- kernel parallel port PPS client + * + * + * Copyright (C) 2009 Alexander Gordeev <lasaine@lvk.cs.msu.su> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +/* + * TODO: + * implement echo over SEL pin + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/irqnr.h> +#include <linux/time.h> +#include <linux/slab.h> +#include <linux/parport.h> +#include <linux/pps_kernel.h> + +#define DRVDESC "parallel port PPS client" + +/* module parameters */ + +#define CLEAR_WAIT_MAX 100 +#define CLEAR_WAIT_MAX_ERRORS 5 + +static unsigned int clear_wait = 100; +MODULE_PARM_DESC(clear_wait, + "Maximum number of port reads when polling for signal clear," + " zero turns clear edge capture off entirely"); +module_param(clear_wait, uint, 0); + + +/* internal per port structure */ +struct pps_client_pp { + struct pardevice *pardev; /* parport device */ + struct pps_device *pps; /* PPS device */ + unsigned int cw; /* port clear timeout */ + unsigned int cw_err; /* number of timeouts */ +}; + +static inline int signal_is_set(struct parport *port) +{ + return (port->ops->read_status(port) & PARPORT_STATUS_ACK) != 0; +} + +/* parport interrupt handler */ +static void parport_irq(void *handle) +{ + struct pps_event_time ts_assert, ts_clear; + struct pps_client_pp *dev = handle; + struct parport *port = dev->pardev->port; + unsigned int i; + unsigned long flags; + + /* first of all we get the time stamp... */ + pps_get_ts(&ts_assert); + + if (dev->cw == 0) + /* clear edge capture disabled */ + goto out_assert; + + /* try capture the clear edge */ + + /* We have to disable interrupts here. The idea is to prevent + * other interrupts on the same processor to introduce random + * lags while polling the port. Reading from IO port is known + * to take approximately 1us while other interrupt handlers can + * take much more potentially. + * + * Interrupts won't be disabled for a long time because the + * number of polls is limited by clear_wait parameter which is + * kept rather low. So it should never be an issue. + */ + local_irq_save(flags); + /* check the signal (no signal means the pulse is lost this time) */ + if (!signal_is_set(port)) { + local_irq_restore(flags); + dev_err(dev->pps->dev, "lost the signal\n"); + goto out_assert; + } + + /* poll the port until the signal is unset */ + for (i = dev->cw; i; i--) + if (!signal_is_set(port)) { + pps_get_ts(&ts_clear); + local_irq_restore(flags); + dev->cw_err = 0; + goto out_both; + } + local_irq_restore(flags); + + /* timeout */ + dev->cw_err++; + if (dev->cw_err >= CLEAR_WAIT_MAX_ERRORS) { + dev_err(dev->pps->dev, "disabled clear edge capture after %d" + " timeouts\n", dev->cw_err); + dev->cw = 0; + dev->cw_err = 0; + } + +out_assert: + /* fire assert event */ + pps_event(dev->pps, &ts_assert, + PPS_CAPTUREASSERT, NULL); + return; + +out_both: + /* fire assert event */ + pps_event(dev->pps, &ts_assert, + PPS_CAPTUREASSERT, NULL); + /* fire clear event */ + pps_event(dev->pps, &ts_clear, + PPS_CAPTURECLEAR, NULL); + return; +} + +static void parport_attach(struct parport *port) +{ + struct pps_client_pp *device; + struct pps_source_info info = { + .name = KBUILD_MODNAME, + .path = "", + .mode = PPS_CAPTUREBOTH | \ + PPS_OFFSETASSERT | PPS_OFFSETCLEAR | \ + PPS_ECHOASSERT | PPS_ECHOCLEAR | \ + PPS_CANWAIT | PPS_TSFMT_TSPEC, + .owner = THIS_MODULE, + .dev = NULL + }; + + device = kzalloc(sizeof(struct pps_client_pp), GFP_KERNEL); + if (!device) { + pr_err("memory allocation failed, not attaching\n"); + return; + } + + device->pardev = parport_register_device(port, KBUILD_MODNAME, + NULL, NULL, parport_irq, PARPORT_FLAG_EXCL, device); + if (!device->pardev) { + pr_err("couldn't register with %s\n", port->name); + goto err_free; + } + + if (parport_claim_or_block(device->pardev) < 0) { + pr_err("couldn't claim %s\n", port->name); + goto err_unregister_dev; + } + + device->pps = pps_register_source(&info, + PPS_CAPTUREBOTH | PPS_OFFSETASSERT | PPS_OFFSETCLEAR); + if (device->pps == NULL) { + pr_err("couldn't register PPS source\n"); + goto err_release_dev; + } + + device->cw = clear_wait; + + port->ops->enable_irq(port); + + pr_info("attached to %s\n", port->name); + + return; + +err_release_dev: + parport_release(device->pardev); +err_unregister_dev: + parport_unregister_device(device->pardev); +err_free: + kfree(device); +} + +static void parport_detach(struct parport *port) +{ + struct pardevice *pardev = port->cad; + struct pps_client_pp *device; + + /* FIXME: oooh, this is ugly! */ + if (strcmp(pardev->name, KBUILD_MODNAME)) + /* not our port */ + return; + + device = pardev->private; + + port->ops->disable_irq(port); + pps_unregister_source(device->pps); + parport_release(pardev); + parport_unregister_device(pardev); + kfree(device); +} + +static struct parport_driver pps_parport_driver = { + .name = KBUILD_MODNAME, + .attach = parport_attach, + .detach = parport_detach, +}; + +/* module staff */ + +static int __init pps_parport_init(void) +{ + int ret; + + pr_info(DRVDESC "\n"); + + if (clear_wait > CLEAR_WAIT_MAX) { + pr_err("clear_wait value should be not greater" + " then %d\n", CLEAR_WAIT_MAX); + return -EINVAL; + } + + ret = parport_register_driver(&pps_parport_driver); + if (ret) { + pr_err("unable to register with parport\n"); + return ret; + } + + return 0; +} + +static void __exit pps_parport_exit(void) +{ + parport_unregister_driver(&pps_parport_driver); +} + +module_init(pps_parport_init); +module_exit(pps_parport_exit); + +MODULE_AUTHOR("Alexander Gordeev <lasaine@lvk.cs.msu.su>"); +MODULE_DESCRIPTION(DRVDESC); +MODULE_LICENSE("GPL"); |