diff options
Diffstat (limited to 'drivers/pwm')
41 files changed, 11999 insertions, 0 deletions
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig new file mode 100644 index 000000000..b1541f40f --- /dev/null +++ b/drivers/pwm/Kconfig @@ -0,0 +1,376 @@ +menuconfig PWM + bool "Pulse-Width Modulation (PWM) Support" + help + Generic Pulse-Width Modulation (PWM) support. + + In Pulse-Width Modulation, a variation of the width of pulses + in a rectangular pulse signal is used as a means to alter the + average power of the signal. Applications include efficient + power delivery and voltage regulation. In computer systems, + PWMs are commonly used to control fans or the brightness of + display backlights. + + This framework provides a generic interface to PWM devices + within the Linux kernel. On the driver side it provides an API + to register and unregister a PWM chip, an abstraction of a PWM + controller, that supports one or more PWM devices. Client + drivers can request PWM devices and use the generic framework + to configure as well as enable and disable them. + + This generic framework replaces the legacy PWM framework which + allows only a single driver implementing the required API. Not + all legacy implementations have been ported to the framework + yet. The framework provides an API that is backward compatible + with the legacy framework so that existing client drivers + continue to work as expected. + + If unsure, say no. + +if PWM + +config PWM_SYSFS + bool + default y if SYSFS + +config PWM_AB8500 + tristate "AB8500 PWM support" + depends on AB8500_CORE && ARCH_U8500 + help + Generic PWM framework driver for Analog Baseband AB8500. + + To compile this driver as a module, choose M here: the module + will be called pwm-ab8500. + +config PWM_ATMEL + tristate "Atmel PWM support" + depends on ARCH_AT91 || AVR32 + help + Generic PWM framework driver for Atmel SoC. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel. + +config PWM_ATMEL_HLCDC_PWM + tristate "Atmel HLCDC PWM support" + depends on MFD_ATMEL_HLCDC + depends on HAVE_CLK + help + Generic PWM framework driver for the PWM output of the HLCDC + (Atmel High-end LCD Controller). This PWM output is mainly used + to control the LCD backlight. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel-hlcdc. + +config PWM_ATMEL_TCB + tristate "Atmel TC Block PWM support" + depends on ATMEL_TCLIB && OF + help + Generic PWM framework driver for Atmel Timer Counter Block. + + A Timer Counter Block provides 6 PWM devices grouped by 2. + Devices in a given group must have the same period. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel-tcb. + +config PWM_BCM_KONA + tristate "Kona PWM support" + depends on ARCH_BCM_MOBILE + help + Generic PWM framework driver for Broadcom Kona PWM block. + + To compile this driver as a module, choose M here: the module + will be called pwm-bcm-kona. + +config PWM_BCM2835 + tristate "BCM2835 PWM support" + depends on ARCH_BCM2835 + help + PWM framework driver for BCM2835 controller (Raspberry Pi) + + To compile this driver as a module, choose M here: the module + will be called pwm-bcm2835. + +config PWM_BFIN + tristate "Blackfin PWM support" + depends on BFIN_GPTIMERS + help + Generic PWM framework driver for Blackfin. + + To compile this driver as a module, choose M here: the module + will be called pwm-bfin. + +config PWM_CLPS711X + tristate "CLPS711X PWM support" + depends on ARCH_CLPS711X || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for Cirrus Logic CLPS711X. + + To compile this driver as a module, choose M here: the module + will be called pwm-clps711x. + +config PWM_EP93XX + tristate "Cirrus Logic EP93xx PWM support" + depends on ARCH_EP93XX + help + Generic PWM framework driver for Cirrus Logic EP93xx. + + To compile this driver as a module, choose M here: the module + will be called pwm-ep93xx. + +config PWM_FSL_FTM + tristate "Freescale FlexTimer Module (FTM) PWM support" + depends on OF + select REGMAP_MMIO + help + Generic FTM PWM framework driver for Freescale VF610 and + Layerscape LS-1 SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-fsl-ftm. + +config PWM_IMG + tristate "Imagination Technologies PWM driver" + depends on HAS_IOMEM + depends on MFD_SYSCON + depends on COMMON_CLK + depends on MIPS || COMPILE_TEST + help + Generic PWM framework driver for Imagination Technologies + PWM block which supports 4 channels. + + To compile this driver as a module, choose M here: the module + will be called pwm-img + +config PWM_IMX + tristate "i.MX PWM support" + depends on ARCH_MXC + help + Generic PWM framework driver for i.MX. + + To compile this driver as a module, choose M here: the module + will be called pwm-imx. + +config PWM_JZ4740 + tristate "Ingenic JZ4740 PWM support" + depends on MACH_JZ4740 + help + Generic PWM framework driver for Ingenic JZ4740 based + machines. + + To compile this driver as a module, choose M here: the module + will be called pwm-jz4740. + +config PWM_LP3943 + tristate "TI/National Semiconductor LP3943 PWM support" + depends on MFD_LP3943 + help + Generic PWM framework driver for LP3943 which supports two PWM + channels. + + To compile this driver as a module, choose M here: the module + will be called pwm-lp3943. + +config PWM_LPC32XX + tristate "LPC32XX PWM support" + depends on ARCH_LPC32XX + help + Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two + PWM controllers. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpc32xx. + +config PWM_LPSS + tristate "Intel LPSS PWM support" + depends on X86 + help + Generic PWM framework driver for Intel Low Power Subsystem PWM + controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpss. + +config PWM_LPSS_PCI + tristate "Intel LPSS PWM PCI driver" + depends on PWM_LPSS && PCI + help + The PCI driver for Intel Low Power Subsystem PWM controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpss-pci. + +config PWM_LPSS_PLATFORM + tristate "Intel LPSS PWM platform driver" + depends on PWM_LPSS && ACPI + help + The platform driver for Intel Low Power Subsystem PWM controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpss-platform. + +config PWM_MXS + tristate "Freescale MXS PWM support" + depends on ARCH_MXS && OF + select STMP_DEVICE + help + Generic PWM framework driver for Freescale MXS. + + To compile this driver as a module, choose M here: the module + will be called pwm-mxs. + +config PWM_PCA9685 + tristate "NXP PCA9685 PWM driver" + depends on OF && I2C + select REGMAP_I2C + help + Generic PWM framework driver for NXP PCA9685 LED controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-pca9685. + +config PWM_PUV3 + tristate "PKUnity NetBook-0916 PWM support" + depends on ARCH_PUV3 + help + Generic PWM framework driver for PKUnity NetBook-0916. + + To compile this driver as a module, choose M here: the module + will be called pwm-puv3. + +config PWM_PXA + tristate "PXA PWM support" + depends on ARCH_PXA + help + Generic PWM framework driver for PXA. + + To compile this driver as a module, choose M here: the module + will be called pwm-pxa. + +config PWM_RENESAS_TPU + tristate "Renesas TPU PWM support" + depends on ARCH_SHMOBILE || COMPILE_TEST + depends on HAS_IOMEM + help + This driver exposes the Timer Pulse Unit (TPU) PWM controller found + in Renesas chips through the PWM API. + + To compile this driver as a module, choose M here: the module + will be called pwm-renesas-tpu. + +config PWM_ROCKCHIP + tristate "Rockchip PWM support" + depends on ARCH_ROCKCHIP + help + Generic PWM framework driver for the PWM controller found on + Rockchip SoCs. + +config PWM_SAMSUNG + tristate "Samsung PWM support" + depends on PLAT_SAMSUNG || ARCH_EXYNOS + help + Generic PWM framework driver for Samsung. + + To compile this driver as a module, choose M here: the module + will be called pwm-samsung. + +config PWM_SPEAR + tristate "STMicroelectronics SPEAr PWM support" + depends on PLAT_SPEAR + depends on OF + help + Generic PWM framework driver for the PWM controller on ST + SPEAr SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-spear. + +config PWM_STI + tristate "STiH4xx PWM support" + depends on ARCH_STI + depends on OF + help + Generic PWM framework driver for STiH4xx SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-sti. + +config PWM_SUN4I + tristate "Allwinner PWM support" + depends on ARCH_SUNXI || COMPILE_TEST + depends on HAS_IOMEM && COMMON_CLK + help + Generic PWM framework driver for Allwinner SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-sun4i. + +config PWM_TEGRA + tristate "NVIDIA Tegra PWM support" + depends on ARCH_TEGRA + help + Generic PWM framework driver for the PWFM controller found on NVIDIA + Tegra SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-tegra. + +config PWM_TIECAP + tristate "ECAP PWM support" + depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX + help + PWM driver support for the ECAP APWM controller found on AM33XX + TI SOC + + To compile this driver as a module, choose M here: the module + will be called pwm-tiecap. + +config PWM_TIEHRPWM + tristate "EHRPWM PWM support" + depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX + help + PWM driver support for the EHRPWM controller found on AM33XX + TI SOC + + To compile this driver as a module, choose M here: the module + will be called pwm-tiehrpwm. + +config PWM_TIPWMSS + bool + default y if SOC_AM33XX && (PWM_TIECAP || PWM_TIEHRPWM) + help + PWM Subsystem driver support for AM33xx SOC. + + PWM submodules require PWM config space access from submodule + drivers and require common parent driver support. + +config PWM_TWL + tristate "TWL4030/6030 PWM support" + depends on TWL4030_CORE + help + Generic PWM framework driver for TWL4030/6030. + + To compile this driver as a module, choose M here: the module + will be called pwm-twl. + +config PWM_TWL_LED + tristate "TWL4030/6030 PWM support for LED drivers" + depends on TWL4030_CORE + help + Generic PWM framework driver for TWL4030/6030 LED terminals. + + To compile this driver as a module, choose M here: the module + will be called pwm-twl-led. + +config PWM_VT8500 + tristate "vt8500 PWM support" + depends on ARCH_VT8500 + help + Generic PWM framework driver for vt8500. + + To compile this driver as a module, choose M here: the module + will be called pwm-vt8500. + +endif diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile new file mode 100644 index 000000000..ec50eb5b5 --- /dev/null +++ b/drivers/pwm/Makefile @@ -0,0 +1,37 @@ +obj-$(CONFIG_PWM) += core.o +obj-$(CONFIG_PWM_SYSFS) += sysfs.o +obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o +obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o +obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o +obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o +obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o +obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o +obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o +obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o +obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o +obj-$(CONFIG_PWM_FSL_FTM) += pwm-fsl-ftm.o +obj-$(CONFIG_PWM_IMG) += pwm-img.o +obj-$(CONFIG_PWM_IMX) += pwm-imx.o +obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o +obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o +obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o +obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o +obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o +obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o +obj-$(CONFIG_PWM_MXS) += pwm-mxs.o +obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o +obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o +obj-$(CONFIG_PWM_PXA) += pwm-pxa.o +obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o +obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o +obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o +obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o +obj-$(CONFIG_PWM_STI) += pwm-sti.o +obj-$(CONFIG_PWM_SUN4I) += pwm-sun4i.o +obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o +obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o +obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o +obj-$(CONFIG_PWM_TIPWMSS) += pwm-tipwmss.o +obj-$(CONFIG_PWM_TWL) += pwm-twl.o +obj-$(CONFIG_PWM_TWL_LED) += pwm-twl-led.o +obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c new file mode 100644 index 000000000..ba34c7d89 --- /dev/null +++ b/drivers/pwm/core.c @@ -0,0 +1,895 @@ +/* + * Generic pwmlib implementation + * + * Copyright (C) 2011 Sascha Hauer <s.hauer@pengutronix.de> + * Copyright (C) 2011-2012 Avionic Design GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/pwm.h> +#include <linux/radix-tree.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +#include <dt-bindings/pwm/pwm.h> + +#define MAX_PWMS 1024 + +static DEFINE_MUTEX(pwm_lookup_lock); +static LIST_HEAD(pwm_lookup_list); +static DEFINE_MUTEX(pwm_lock); +static LIST_HEAD(pwm_chips); +static DECLARE_BITMAP(allocated_pwms, MAX_PWMS); +static RADIX_TREE(pwm_tree, GFP_KERNEL); + +static struct pwm_device *pwm_to_device(unsigned int pwm) +{ + return radix_tree_lookup(&pwm_tree, pwm); +} + +static int alloc_pwms(int pwm, unsigned int count) +{ + unsigned int from = 0; + unsigned int start; + + if (pwm >= MAX_PWMS) + return -EINVAL; + + if (pwm >= 0) + from = pwm; + + start = bitmap_find_next_zero_area(allocated_pwms, MAX_PWMS, from, + count, 0); + + if (pwm >= 0 && start != pwm) + return -EEXIST; + + if (start + count > MAX_PWMS) + return -ENOSPC; + + return start; +} + +static void free_pwms(struct pwm_chip *chip) +{ + unsigned int i; + + for (i = 0; i < chip->npwm; i++) { + struct pwm_device *pwm = &chip->pwms[i]; + radix_tree_delete(&pwm_tree, pwm->pwm); + } + + bitmap_clear(allocated_pwms, chip->base, chip->npwm); + + kfree(chip->pwms); + chip->pwms = NULL; +} + +static struct pwm_chip *pwmchip_find_by_name(const char *name) +{ + struct pwm_chip *chip; + + if (!name) + return NULL; + + mutex_lock(&pwm_lock); + + list_for_each_entry(chip, &pwm_chips, list) { + const char *chip_name = dev_name(chip->dev); + + if (chip_name && strcmp(chip_name, name) == 0) { + mutex_unlock(&pwm_lock); + return chip; + } + } + + mutex_unlock(&pwm_lock); + + return NULL; +} + +static int pwm_device_request(struct pwm_device *pwm, const char *label) +{ + int err; + + if (test_bit(PWMF_REQUESTED, &pwm->flags)) + return -EBUSY; + + if (!try_module_get(pwm->chip->ops->owner)) + return -ENODEV; + + if (pwm->chip->ops->request) { + err = pwm->chip->ops->request(pwm->chip, pwm); + if (err) { + module_put(pwm->chip->ops->owner); + return err; + } + } + + set_bit(PWMF_REQUESTED, &pwm->flags); + pwm->label = label; + + return 0; +} + +struct pwm_device * +of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args) +{ + struct pwm_device *pwm; + + if (pc->of_pwm_n_cells < 3) + return ERR_PTR(-EINVAL); + + if (args->args[0] >= pc->npwm) + return ERR_PTR(-EINVAL); + + pwm = pwm_request_from_chip(pc, args->args[0], NULL); + if (IS_ERR(pwm)) + return pwm; + + pwm_set_period(pwm, args->args[1]); + + if (args->args[2] & PWM_POLARITY_INVERTED) + pwm_set_polarity(pwm, PWM_POLARITY_INVERSED); + else + pwm_set_polarity(pwm, PWM_POLARITY_NORMAL); + + return pwm; +} +EXPORT_SYMBOL_GPL(of_pwm_xlate_with_flags); + +static struct pwm_device * +of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args) +{ + struct pwm_device *pwm; + + if (pc->of_pwm_n_cells < 2) + return ERR_PTR(-EINVAL); + + if (args->args[0] >= pc->npwm) + return ERR_PTR(-EINVAL); + + pwm = pwm_request_from_chip(pc, args->args[0], NULL); + if (IS_ERR(pwm)) + return pwm; + + pwm_set_period(pwm, args->args[1]); + + return pwm; +} + +static void of_pwmchip_add(struct pwm_chip *chip) +{ + if (!chip->dev || !chip->dev->of_node) + return; + + if (!chip->of_xlate) { + chip->of_xlate = of_pwm_simple_xlate; + chip->of_pwm_n_cells = 2; + } + + of_node_get(chip->dev->of_node); +} + +static void of_pwmchip_remove(struct pwm_chip *chip) +{ + if (chip->dev) + of_node_put(chip->dev->of_node); +} + +/** + * pwm_set_chip_data() - set private chip data for a PWM + * @pwm: PWM device + * @data: pointer to chip-specific data + */ +int pwm_set_chip_data(struct pwm_device *pwm, void *data) +{ + if (!pwm) + return -EINVAL; + + pwm->chip_data = data; + + return 0; +} +EXPORT_SYMBOL_GPL(pwm_set_chip_data); + +/** + * pwm_get_chip_data() - get private chip data for a PWM + * @pwm: PWM device + */ +void *pwm_get_chip_data(struct pwm_device *pwm) +{ + return pwm ? pwm->chip_data : NULL; +} +EXPORT_SYMBOL_GPL(pwm_get_chip_data); + +/** + * pwmchip_add() - register a new PWM chip + * @chip: the PWM chip to add + * + * Register a new PWM chip. If chip->base < 0 then a dynamically assigned base + * will be used. + */ +int pwmchip_add(struct pwm_chip *chip) +{ + struct pwm_device *pwm; + unsigned int i; + int ret; + + if (!chip || !chip->dev || !chip->ops || !chip->ops->config || + !chip->ops->enable || !chip->ops->disable || !chip->npwm) + return -EINVAL; + + mutex_lock(&pwm_lock); + + ret = alloc_pwms(chip->base, chip->npwm); + if (ret < 0) + goto out; + + chip->pwms = kzalloc(chip->npwm * sizeof(*pwm), GFP_KERNEL); + if (!chip->pwms) { + ret = -ENOMEM; + goto out; + } + + chip->base = ret; + + for (i = 0; i < chip->npwm; i++) { + pwm = &chip->pwms[i]; + + pwm->chip = chip; + pwm->pwm = chip->base + i; + pwm->hwpwm = i; + + radix_tree_insert(&pwm_tree, pwm->pwm, pwm); + } + + bitmap_set(allocated_pwms, chip->base, chip->npwm); + + INIT_LIST_HEAD(&chip->list); + list_add(&chip->list, &pwm_chips); + + ret = 0; + + if (IS_ENABLED(CONFIG_OF)) + of_pwmchip_add(chip); + + pwmchip_sysfs_export(chip); + +out: + mutex_unlock(&pwm_lock); + return ret; +} +EXPORT_SYMBOL_GPL(pwmchip_add); + +/** + * pwmchip_remove() - remove a PWM chip + * @chip: the PWM chip to remove + * + * Removes a PWM chip. This function may return busy if the PWM chip provides + * a PWM device that is still requested. + */ +int pwmchip_remove(struct pwm_chip *chip) +{ + unsigned int i; + int ret = 0; + + mutex_lock(&pwm_lock); + + for (i = 0; i < chip->npwm; i++) { + struct pwm_device *pwm = &chip->pwms[i]; + + if (test_bit(PWMF_REQUESTED, &pwm->flags)) { + ret = -EBUSY; + goto out; + } + } + + list_del_init(&chip->list); + + if (IS_ENABLED(CONFIG_OF)) + of_pwmchip_remove(chip); + + free_pwms(chip); + + pwmchip_sysfs_unexport(chip); + +out: + mutex_unlock(&pwm_lock); + return ret; +} +EXPORT_SYMBOL_GPL(pwmchip_remove); + +/** + * pwm_request() - request a PWM device + * @pwm_id: global PWM device index + * @label: PWM device label + * + * This function is deprecated, use pwm_get() instead. + */ +struct pwm_device *pwm_request(int pwm, const char *label) +{ + struct pwm_device *dev; + int err; + + if (pwm < 0 || pwm >= MAX_PWMS) + return ERR_PTR(-EINVAL); + + mutex_lock(&pwm_lock); + + dev = pwm_to_device(pwm); + if (!dev) { + dev = ERR_PTR(-EPROBE_DEFER); + goto out; + } + + err = pwm_device_request(dev, label); + if (err < 0) + dev = ERR_PTR(err); + +out: + mutex_unlock(&pwm_lock); + + return dev; +} +EXPORT_SYMBOL_GPL(pwm_request); + +/** + * pwm_request_from_chip() - request a PWM device relative to a PWM chip + * @chip: PWM chip + * @index: per-chip index of the PWM to request + * @label: a literal description string of this PWM + * + * Returns the PWM at the given index of the given PWM chip. A negative error + * code is returned if the index is not valid for the specified PWM chip or + * if the PWM device cannot be requested. + */ +struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, + unsigned int index, + const char *label) +{ + struct pwm_device *pwm; + int err; + + if (!chip || index >= chip->npwm) + return ERR_PTR(-EINVAL); + + mutex_lock(&pwm_lock); + pwm = &chip->pwms[index]; + + err = pwm_device_request(pwm, label); + if (err < 0) + pwm = ERR_PTR(err); + + mutex_unlock(&pwm_lock); + return pwm; +} +EXPORT_SYMBOL_GPL(pwm_request_from_chip); + +/** + * pwm_free() - free a PWM device + * @pwm: PWM device + * + * This function is deprecated, use pwm_put() instead. + */ +void pwm_free(struct pwm_device *pwm) +{ + pwm_put(pwm); +} +EXPORT_SYMBOL_GPL(pwm_free); + +/** + * pwm_config() - change a PWM device configuration + * @pwm: PWM device + * @duty_ns: "on" time (in nanoseconds) + * @period_ns: duration (in nanoseconds) of one cycle + */ +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +{ + int err; + + if (!pwm || duty_ns < 0 || period_ns <= 0 || duty_ns > period_ns) + return -EINVAL; + + err = pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns); + if (err) + return err; + + pwm->duty_cycle = duty_ns; + pwm->period = period_ns; + + return 0; +} +EXPORT_SYMBOL_GPL(pwm_config); + +/** + * pwm_set_polarity() - configure the polarity of a PWM signal + * @pwm: PWM device + * @polarity: new polarity of the PWM signal + * + * Note that the polarity cannot be configured while the PWM device is enabled + */ +int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity) +{ + int err; + + if (!pwm || !pwm->chip->ops) + return -EINVAL; + + if (!pwm->chip->ops->set_polarity) + return -ENOSYS; + + if (test_bit(PWMF_ENABLED, &pwm->flags)) + return -EBUSY; + + err = pwm->chip->ops->set_polarity(pwm->chip, pwm, polarity); + if (err) + return err; + + pwm->polarity = polarity; + + return 0; +} +EXPORT_SYMBOL_GPL(pwm_set_polarity); + +/** + * pwm_enable() - start a PWM output toggling + * @pwm: PWM device + */ +int pwm_enable(struct pwm_device *pwm) +{ + if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags)) + return pwm->chip->ops->enable(pwm->chip, pwm); + + return pwm ? 0 : -EINVAL; +} +EXPORT_SYMBOL_GPL(pwm_enable); + +/** + * pwm_disable() - stop a PWM output toggling + * @pwm: PWM device + */ +void pwm_disable(struct pwm_device *pwm) +{ + if (pwm && test_and_clear_bit(PWMF_ENABLED, &pwm->flags)) + pwm->chip->ops->disable(pwm->chip, pwm); +} +EXPORT_SYMBOL_GPL(pwm_disable); + +static struct pwm_chip *of_node_to_pwmchip(struct device_node *np) +{ + struct pwm_chip *chip; + + mutex_lock(&pwm_lock); + + list_for_each_entry(chip, &pwm_chips, list) + if (chip->dev && chip->dev->of_node == np) { + mutex_unlock(&pwm_lock); + return chip; + } + + mutex_unlock(&pwm_lock); + + return ERR_PTR(-EPROBE_DEFER); +} + +/** + * of_pwm_get() - request a PWM via the PWM framework + * @np: device node to get the PWM from + * @con_id: consumer name + * + * Returns the PWM device parsed from the phandle and index specified in the + * "pwms" property of a device tree node or a negative error-code on failure. + * Values parsed from the device tree are stored in the returned PWM device + * object. + * + * If con_id is NULL, the first PWM device listed in the "pwms" property will + * be requested. Otherwise the "pwm-names" property is used to do a reverse + * lookup of the PWM index. This also means that the "pwm-names" property + * becomes mandatory for devices that look up the PWM device via the con_id + * parameter. + */ +struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id) +{ + struct pwm_device *pwm = NULL; + struct of_phandle_args args; + struct pwm_chip *pc; + int index = 0; + int err; + + if (con_id) { + index = of_property_match_string(np, "pwm-names", con_id); + if (index < 0) + return ERR_PTR(index); + } + + err = of_parse_phandle_with_args(np, "pwms", "#pwm-cells", index, + &args); + if (err) { + pr_debug("%s(): can't parse \"pwms\" property\n", __func__); + return ERR_PTR(err); + } + + pc = of_node_to_pwmchip(args.np); + if (IS_ERR(pc)) { + pr_debug("%s(): PWM chip not found\n", __func__); + pwm = ERR_CAST(pc); + goto put; + } + + if (args.args_count != pc->of_pwm_n_cells) { + pr_debug("%s: wrong #pwm-cells for %s\n", np->full_name, + args.np->full_name); + pwm = ERR_PTR(-EINVAL); + goto put; + } + + pwm = pc->of_xlate(pc, &args); + if (IS_ERR(pwm)) + goto put; + + /* + * If a consumer name was not given, try to look it up from the + * "pwm-names" property if it exists. Otherwise use the name of + * the user device node. + */ + if (!con_id) { + err = of_property_read_string_index(np, "pwm-names", index, + &con_id); + if (err < 0) + con_id = np->name; + } + + pwm->label = con_id; + +put: + of_node_put(args.np); + + return pwm; +} +EXPORT_SYMBOL_GPL(of_pwm_get); + +/** + * pwm_add_table() - register PWM device consumers + * @table: array of consumers to register + * @num: number of consumers in table + */ +void pwm_add_table(struct pwm_lookup *table, size_t num) +{ + mutex_lock(&pwm_lookup_lock); + + while (num--) { + list_add_tail(&table->list, &pwm_lookup_list); + table++; + } + + mutex_unlock(&pwm_lookup_lock); +} + +/** + * pwm_get() - look up and request a PWM device + * @dev: device for PWM consumer + * @con_id: consumer name + * + * Lookup is first attempted using DT. If the device was not instantiated from + * a device tree, a PWM chip and a relative index is looked up via a table + * supplied by board setup code (see pwm_add_table()). + * + * Once a PWM chip has been found the specified PWM device will be requested + * and is ready to be used. + */ +struct pwm_device *pwm_get(struct device *dev, const char *con_id) +{ + struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER); + const char *dev_id = dev ? dev_name(dev) : NULL; + struct pwm_chip *chip = NULL; + unsigned int best = 0; + struct pwm_lookup *p, *chosen = NULL; + unsigned int match; + + /* look up via DT first */ + if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node) + return of_pwm_get(dev->of_node, con_id); + + /* + * We look up the provider in the static table typically provided by + * board setup code. We first try to lookup the consumer device by + * name. If the consumer device was passed in as NULL or if no match + * was found, we try to find the consumer by directly looking it up + * by name. + * + * If a match is found, the provider PWM chip is looked up by name + * and a PWM device is requested using the PWM device per-chip index. + * + * The lookup algorithm was shamelessly taken from the clock + * framework: + * + * We do slightly fuzzy matching here: + * An entry with a NULL ID is assumed to be a wildcard. + * If an entry has a device ID, it must match + * If an entry has a connection ID, it must match + * Then we take the most specific entry - with the following order + * of precedence: dev+con > dev only > con only. + */ + mutex_lock(&pwm_lookup_lock); + + list_for_each_entry(p, &pwm_lookup_list, list) { + match = 0; + + if (p->dev_id) { + if (!dev_id || strcmp(p->dev_id, dev_id)) + continue; + + match += 2; + } + + if (p->con_id) { + if (!con_id || strcmp(p->con_id, con_id)) + continue; + + match += 1; + } + + if (match > best) { + chosen = p; + + if (match != 3) + best = match; + else + break; + } + } + + if (!chosen) + goto out; + + chip = pwmchip_find_by_name(chosen->provider); + if (!chip) + goto out; + + pwm = pwm_request_from_chip(chip, chosen->index, con_id ?: dev_id); + if (IS_ERR(pwm)) + goto out; + + pwm_set_period(pwm, chosen->period); + pwm_set_polarity(pwm, chosen->polarity); + +out: + mutex_unlock(&pwm_lookup_lock); + return pwm; +} +EXPORT_SYMBOL_GPL(pwm_get); + +/** + * pwm_put() - release a PWM device + * @pwm: PWM device + */ +void pwm_put(struct pwm_device *pwm) +{ + if (!pwm) + return; + + mutex_lock(&pwm_lock); + + if (!test_and_clear_bit(PWMF_REQUESTED, &pwm->flags)) { + pr_warn("PWM device already freed\n"); + goto out; + } + + if (pwm->chip->ops->free) + pwm->chip->ops->free(pwm->chip, pwm); + + pwm->label = NULL; + + module_put(pwm->chip->ops->owner); +out: + mutex_unlock(&pwm_lock); +} +EXPORT_SYMBOL_GPL(pwm_put); + +static void devm_pwm_release(struct device *dev, void *res) +{ + pwm_put(*(struct pwm_device **)res); +} + +/** + * devm_pwm_get() - resource managed pwm_get() + * @dev: device for PWM consumer + * @con_id: consumer name + * + * This function performs like pwm_get() but the acquired PWM device will + * automatically be released on driver detach. + */ +struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id) +{ + struct pwm_device **ptr, *pwm; + + ptr = devres_alloc(devm_pwm_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + pwm = pwm_get(dev, con_id); + if (!IS_ERR(pwm)) { + *ptr = pwm; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return pwm; +} +EXPORT_SYMBOL_GPL(devm_pwm_get); + +/** + * devm_of_pwm_get() - resource managed of_pwm_get() + * @dev: device for PWM consumer + * @np: device node to get the PWM from + * @con_id: consumer name + * + * This function performs like of_pwm_get() but the acquired PWM device will + * automatically be released on driver detach. + */ +struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np, + const char *con_id) +{ + struct pwm_device **ptr, *pwm; + + ptr = devres_alloc(devm_pwm_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + pwm = of_pwm_get(np, con_id); + if (!IS_ERR(pwm)) { + *ptr = pwm; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return pwm; +} +EXPORT_SYMBOL_GPL(devm_of_pwm_get); + +static int devm_pwm_match(struct device *dev, void *res, void *data) +{ + struct pwm_device **p = res; + + if (WARN_ON(!p || !*p)) + return 0; + + return *p == data; +} + +/** + * devm_pwm_put() - resource managed pwm_put() + * @dev: device for PWM consumer + * @pwm: PWM device + * + * Release a PWM previously allocated using devm_pwm_get(). Calling this + * function is usually not needed because devm-allocated resources are + * automatically released on driver detach. + */ +void devm_pwm_put(struct device *dev, struct pwm_device *pwm) +{ + WARN_ON(devres_release(dev, devm_pwm_release, devm_pwm_match, pwm)); +} +EXPORT_SYMBOL_GPL(devm_pwm_put); + +/** + * pwm_can_sleep() - report whether PWM access will sleep + * @pwm: PWM device + * + * It returns true if accessing the PWM can sleep, false otherwise. + */ +bool pwm_can_sleep(struct pwm_device *pwm) +{ + return pwm->chip->can_sleep; +} +EXPORT_SYMBOL_GPL(pwm_can_sleep); + +#ifdef CONFIG_DEBUG_FS +static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s) +{ + unsigned int i; + + for (i = 0; i < chip->npwm; i++) { + struct pwm_device *pwm = &chip->pwms[i]; + + seq_printf(s, " pwm-%-3d (%-20.20s):", i, pwm->label); + + if (test_bit(PWMF_REQUESTED, &pwm->flags)) + seq_puts(s, " requested"); + + if (test_bit(PWMF_ENABLED, &pwm->flags)) + seq_puts(s, " enabled"); + + seq_puts(s, "\n"); + } +} + +static void *pwm_seq_start(struct seq_file *s, loff_t *pos) +{ + mutex_lock(&pwm_lock); + s->private = ""; + + return seq_list_start(&pwm_chips, *pos); +} + +static void *pwm_seq_next(struct seq_file *s, void *v, loff_t *pos) +{ + s->private = "\n"; + + return seq_list_next(v, &pwm_chips, pos); +} + +static void pwm_seq_stop(struct seq_file *s, void *v) +{ + mutex_unlock(&pwm_lock); +} + +static int pwm_seq_show(struct seq_file *s, void *v) +{ + struct pwm_chip *chip = list_entry(v, struct pwm_chip, list); + + seq_printf(s, "%s%s/%s, %d PWM device%s\n", (char *)s->private, + chip->dev->bus ? chip->dev->bus->name : "no-bus", + dev_name(chip->dev), chip->npwm, + (chip->npwm != 1) ? "s" : ""); + + if (chip->ops->dbg_show) + chip->ops->dbg_show(chip, s); + else + pwm_dbg_show(chip, s); + + return 0; +} + +static const struct seq_operations pwm_seq_ops = { + .start = pwm_seq_start, + .next = pwm_seq_next, + .stop = pwm_seq_stop, + .show = pwm_seq_show, +}; + +static int pwm_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &pwm_seq_ops); +} + +static const struct file_operations pwm_debugfs_ops = { + .owner = THIS_MODULE, + .open = pwm_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init pwm_debugfs_init(void) +{ + debugfs_create_file("pwm", S_IFREG | S_IRUGO, NULL, NULL, + &pwm_debugfs_ops); + + return 0; +} + +subsys_initcall(pwm_debugfs_init); +#endif /* CONFIG_DEBUG_FS */ diff --git a/drivers/pwm/pwm-ab8500.c b/drivers/pwm/pwm-ab8500.c new file mode 100644 index 000000000..f39399273 --- /dev/null +++ b/drivers/pwm/pwm-ab8500.c @@ -0,0 +1,143 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Arun R Murthy <arun.murthy@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/pwm.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/module.h> + +/* + * PWM Out generators + * Bank: 0x10 + */ +#define AB8500_PWM_OUT_CTRL1_REG 0x60 +#define AB8500_PWM_OUT_CTRL2_REG 0x61 +#define AB8500_PWM_OUT_CTRL7_REG 0x66 + +struct ab8500_pwm_chip { + struct pwm_chip chip; +}; + +static int ab8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + int ret = 0; + unsigned int higher_val, lower_val; + u8 reg; + + /* + * get the first 8 bits that are be written to + * AB8500_PWM_OUT_CTRL1_REG[0:7] + */ + lower_val = duty_ns & 0x00FF; + /* + * get bits [9:10] that are to be written to + * AB8500_PWM_OUT_CTRL2_REG[0:1] + */ + higher_val = ((duty_ns & 0x0300) >> 8); + + reg = AB8500_PWM_OUT_CTRL1_REG + ((chip->base - 1) * 2); + + ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC, + reg, (u8)lower_val); + if (ret < 0) + return ret; + ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC, + (reg + 1), (u8)higher_val); + + return ret; +} + +static int ab8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + int ret; + + ret = abx500_mask_and_set_register_interruptible(chip->dev, + AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG, + 1 << (chip->base - 1), 1 << (chip->base - 1)); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n", + pwm->label, ret); + return ret; +} + +static void ab8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + int ret; + + ret = abx500_mask_and_set_register_interruptible(chip->dev, + AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG, + 1 << (chip->base - 1), 0); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n", + pwm->label, ret); +} + +static const struct pwm_ops ab8500_pwm_ops = { + .config = ab8500_pwm_config, + .enable = ab8500_pwm_enable, + .disable = ab8500_pwm_disable, + .owner = THIS_MODULE, +}; + +static int ab8500_pwm_probe(struct platform_device *pdev) +{ + struct ab8500_pwm_chip *ab8500; + int err; + + /* + * Nothing to be done in probe, this is required to get the + * device which is required for ab8500 read and write + */ + ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL); + if (ab8500 == NULL) + return -ENOMEM; + + ab8500->chip.dev = &pdev->dev; + ab8500->chip.ops = &ab8500_pwm_ops; + ab8500->chip.base = pdev->id; + ab8500->chip.npwm = 1; + + err = pwmchip_add(&ab8500->chip); + if (err < 0) + return err; + + dev_dbg(&pdev->dev, "pwm probe successful\n"); + platform_set_drvdata(pdev, ab8500); + + return 0; +} + +static int ab8500_pwm_remove(struct platform_device *pdev) +{ + struct ab8500_pwm_chip *ab8500 = platform_get_drvdata(pdev); + int err; + + err = pwmchip_remove(&ab8500->chip); + if (err < 0) + return err; + + dev_dbg(&pdev->dev, "pwm driver removed\n"); + + return 0; +} + +static struct platform_driver ab8500_pwm_driver = { + .driver = { + .name = "ab8500-pwm", + }, + .probe = ab8500_pwm_probe, + .remove = ab8500_pwm_remove, +}; +module_platform_driver(ab8500_pwm_driver); + +MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>"); +MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver"); +MODULE_ALIAS("platform:ab8500-pwm"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c new file mode 100644 index 000000000..fa5feaba2 --- /dev/null +++ b/drivers/pwm/pwm-atmel-hlcdc.c @@ -0,0 +1,309 @@ +/* + * Copyright (C) 2014 Free Electrons + * Copyright (C) 2014 Atmel + * + * Author: Boris BREZILLON <boris.brezillon@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/mfd/atmel-hlcdc.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/regmap.h> + +#define ATMEL_HLCDC_PWMCVAL_MASK GENMASK(15, 8) +#define ATMEL_HLCDC_PWMCVAL(x) (((x) << 8) & ATMEL_HLCDC_PWMCVAL_MASK) +#define ATMEL_HLCDC_PWMPOL BIT(4) +#define ATMEL_HLCDC_PWMPS_MASK GENMASK(2, 0) +#define ATMEL_HLCDC_PWMPS_MAX 0x6 +#define ATMEL_HLCDC_PWMPS(x) ((x) & ATMEL_HLCDC_PWMPS_MASK) + +struct atmel_hlcdc_pwm_errata { + bool slow_clk_erratum; + bool div1_clk_erratum; +}; + +struct atmel_hlcdc_pwm { + struct pwm_chip chip; + struct atmel_hlcdc *hlcdc; + struct clk *cur_clk; + const struct atmel_hlcdc_pwm_errata *errata; +}; + +static inline struct atmel_hlcdc_pwm *to_atmel_hlcdc_pwm(struct pwm_chip *chip) +{ + return container_of(chip, struct atmel_hlcdc_pwm, chip); +} + +static int atmel_hlcdc_pwm_config(struct pwm_chip *c, + struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c); + struct atmel_hlcdc *hlcdc = chip->hlcdc; + struct clk *new_clk = hlcdc->slow_clk; + u64 pwmcval = duty_ns * 256; + unsigned long clk_freq; + u64 clk_period_ns; + u32 pwmcfg; + int pres; + + if (!chip->errata || !chip->errata->slow_clk_erratum) { + clk_freq = clk_get_rate(new_clk); + if (!clk_freq) + return -EINVAL; + + clk_period_ns = (u64)NSEC_PER_SEC * 256; + do_div(clk_period_ns, clk_freq); + } + + /* Errata: cannot use slow clk on some IP revisions */ + if ((chip->errata && chip->errata->slow_clk_erratum) || + clk_period_ns > period_ns) { + new_clk = hlcdc->sys_clk; + clk_freq = clk_get_rate(new_clk); + if (!clk_freq) + return -EINVAL; + + clk_period_ns = (u64)NSEC_PER_SEC * 256; + do_div(clk_period_ns, clk_freq); + } + + for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) { + /* Errata: cannot divide by 1 on some IP revisions */ + if (!pres && chip->errata && chip->errata->div1_clk_erratum) + continue; + + if ((clk_period_ns << pres) >= period_ns) + break; + } + + if (pres > ATMEL_HLCDC_PWMPS_MAX) + return -EINVAL; + + pwmcfg = ATMEL_HLCDC_PWMPS(pres); + + if (new_clk != chip->cur_clk) { + u32 gencfg = 0; + int ret; + + ret = clk_prepare_enable(new_clk); + if (ret) + return ret; + + clk_disable_unprepare(chip->cur_clk); + chip->cur_clk = new_clk; + + if (new_clk == hlcdc->sys_clk) + gencfg = ATMEL_HLCDC_CLKPWMSEL; + + ret = regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(0), + ATMEL_HLCDC_CLKPWMSEL, gencfg); + if (ret) + return ret; + } + + do_div(pwmcval, period_ns); + + /* + * The PWM duty cycle is configurable from 0/256 to 255/256 of the + * period cycle. Hence we can't set a duty cycle occupying the + * whole period cycle if we're asked to. + * Set it to 255 if pwmcval is greater than 256. + */ + if (pwmcval > 255) + pwmcval = 255; + + pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval); + + return regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6), + ATMEL_HLCDC_PWMCVAL_MASK | + ATMEL_HLCDC_PWMPS_MASK, + pwmcfg); +} + +static int atmel_hlcdc_pwm_set_polarity(struct pwm_chip *c, + struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c); + struct atmel_hlcdc *hlcdc = chip->hlcdc; + u32 cfg = 0; + + if (polarity == PWM_POLARITY_NORMAL) + cfg = ATMEL_HLCDC_PWMPOL; + + return regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6), + ATMEL_HLCDC_PWMPOL, cfg); +} + +static int atmel_hlcdc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm) +{ + struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c); + struct atmel_hlcdc *hlcdc = chip->hlcdc; + u32 status; + int ret; + + ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN, ATMEL_HLCDC_PWM); + if (ret) + return ret; + + while (true) { + ret = regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status); + if (ret) + return ret; + + if ((status & ATMEL_HLCDC_PWM) != 0) + break; + + usleep_range(1, 10); + } + + return 0; +} + +static void atmel_hlcdc_pwm_disable(struct pwm_chip *c, + struct pwm_device *pwm) +{ + struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c); + struct atmel_hlcdc *hlcdc = chip->hlcdc; + u32 status; + int ret; + + ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_PWM); + if (ret) + return; + + while (true) { + ret = regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status); + if (ret) + return; + + if ((status & ATMEL_HLCDC_PWM) == 0) + break; + + usleep_range(1, 10); + } +} + +static const struct pwm_ops atmel_hlcdc_pwm_ops = { + .config = atmel_hlcdc_pwm_config, + .set_polarity = atmel_hlcdc_pwm_set_polarity, + .enable = atmel_hlcdc_pwm_enable, + .disable = atmel_hlcdc_pwm_disable, + .owner = THIS_MODULE, +}; + +static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_at91sam9x5_errata = { + .slow_clk_erratum = true, +}; + +static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = { + .div1_clk_erratum = true, +}; + +static const struct of_device_id atmel_hlcdc_dt_ids[] = { + { + .compatible = "atmel,at91sam9x5-hlcdc", + .data = &atmel_hlcdc_pwm_at91sam9x5_errata, + }, + { + .compatible = "atmel,sama5d3-hlcdc", + .data = &atmel_hlcdc_pwm_sama5d3_errata, + }, + { + .compatible = "atmel,sama5d4-hlcdc", + .data = &atmel_hlcdc_pwm_sama5d3_errata, + }, + { /* sentinel */ }, +}; + +static int atmel_hlcdc_pwm_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct device *dev = &pdev->dev; + struct atmel_hlcdc_pwm *chip; + struct atmel_hlcdc *hlcdc; + int ret; + + hlcdc = dev_get_drvdata(dev->parent); + + chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + ret = clk_prepare_enable(hlcdc->periph_clk); + if (ret) + return ret; + + match = of_match_node(atmel_hlcdc_dt_ids, dev->parent->of_node); + if (match) + chip->errata = match->data; + + chip->hlcdc = hlcdc; + chip->chip.ops = &atmel_hlcdc_pwm_ops; + chip->chip.dev = dev; + chip->chip.base = -1; + chip->chip.npwm = 1; + chip->chip.of_xlate = of_pwm_xlate_with_flags; + chip->chip.of_pwm_n_cells = 3; + chip->chip.can_sleep = 1; + + ret = pwmchip_add(&chip->chip); + if (ret) { + clk_disable_unprepare(hlcdc->periph_clk); + return ret; + } + + platform_set_drvdata(pdev, chip); + + return 0; +} + +static int atmel_hlcdc_pwm_remove(struct platform_device *pdev) +{ + struct atmel_hlcdc_pwm *chip = platform_get_drvdata(pdev); + int ret; + + ret = pwmchip_remove(&chip->chip); + if (ret) + return ret; + + clk_disable_unprepare(chip->hlcdc->periph_clk); + + return 0; +} + +static const struct of_device_id atmel_hlcdc_pwm_dt_ids[] = { + { .compatible = "atmel,hlcdc-pwm" }, + { /* sentinel */ }, +}; + +static struct platform_driver atmel_hlcdc_pwm_driver = { + .driver = { + .name = "atmel-hlcdc-pwm", + .of_match_table = atmel_hlcdc_pwm_dt_ids, + }, + .probe = atmel_hlcdc_pwm_probe, + .remove = atmel_hlcdc_pwm_remove, +}; +module_platform_driver(atmel_hlcdc_pwm_driver); + +MODULE_ALIAS("platform:atmel-hlcdc-pwm"); +MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>"); +MODULE_DESCRIPTION("Atmel HLCDC PWM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-atmel-tcb.c b/drivers/pwm/pwm-atmel-tcb.c new file mode 100644 index 000000000..d14e0677c --- /dev/null +++ b/drivers/pwm/pwm-atmel-tcb.c @@ -0,0 +1,448 @@ +/* + * Copyright (C) Overkiz SAS 2012 + * + * Author: Boris BREZILLON <b.brezillon@overkiz.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/atmel_tc.h> +#include <linux/pwm.h> +#include <linux/of_device.h> +#include <linux/slab.h> + +#define NPWM 6 + +#define ATMEL_TC_ACMR_MASK (ATMEL_TC_ACPA | ATMEL_TC_ACPC | \ + ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG) + +#define ATMEL_TC_BCMR_MASK (ATMEL_TC_BCPB | ATMEL_TC_BCPC | \ + ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG) + +struct atmel_tcb_pwm_device { + enum pwm_polarity polarity; /* PWM polarity */ + unsigned div; /* PWM clock divider */ + unsigned duty; /* PWM duty expressed in clk cycles */ + unsigned period; /* PWM period expressed in clk cycles */ +}; + +struct atmel_tcb_pwm_chip { + struct pwm_chip chip; + spinlock_t lock; + struct atmel_tc *tc; + struct atmel_tcb_pwm_device *pwms[NPWM]; +}; + +static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct atmel_tcb_pwm_chip, chip); +} + +static int atmel_tcb_pwm_set_polarity(struct pwm_chip *chip, + struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); + + tcbpwm->polarity = polarity; + + return 0; +} + +static int atmel_tcb_pwm_request(struct pwm_chip *chip, + struct pwm_device *pwm) +{ + struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); + struct atmel_tcb_pwm_device *tcbpwm; + struct atmel_tc *tc = tcbpwmc->tc; + void __iomem *regs = tc->regs; + unsigned group = pwm->hwpwm / 2; + unsigned index = pwm->hwpwm % 2; + unsigned cmr; + int ret; + + tcbpwm = devm_kzalloc(chip->dev, sizeof(*tcbpwm), GFP_KERNEL); + if (!tcbpwm) + return -ENOMEM; + + ret = clk_prepare_enable(tc->clk[group]); + if (ret) { + devm_kfree(chip->dev, tcbpwm); + return ret; + } + + pwm_set_chip_data(pwm, tcbpwm); + tcbpwm->polarity = PWM_POLARITY_NORMAL; + tcbpwm->duty = 0; + tcbpwm->period = 0; + tcbpwm->div = 0; + + spin_lock(&tcbpwmc->lock); + cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR)); + /* + * Get init config from Timer Counter registers if + * Timer Counter is already configured as a PWM generator. + */ + if (cmr & ATMEL_TC_WAVE) { + if (index == 0) + tcbpwm->duty = + __raw_readl(regs + ATMEL_TC_REG(group, RA)); + else + tcbpwm->duty = + __raw_readl(regs + ATMEL_TC_REG(group, RB)); + + tcbpwm->div = cmr & ATMEL_TC_TCCLKS; + tcbpwm->period = __raw_readl(regs + ATMEL_TC_REG(group, RC)); + cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK | + ATMEL_TC_BCMR_MASK); + } else + cmr = 0; + + cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0; + __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR)); + spin_unlock(&tcbpwmc->lock); + + tcbpwmc->pwms[pwm->hwpwm] = tcbpwm; + + return 0; +} + +static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); + struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); + struct atmel_tc *tc = tcbpwmc->tc; + + clk_disable_unprepare(tc->clk[pwm->hwpwm / 2]); + tcbpwmc->pwms[pwm->hwpwm] = NULL; + devm_kfree(chip->dev, tcbpwm); +} + +static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); + struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); + struct atmel_tc *tc = tcbpwmc->tc; + void __iomem *regs = tc->regs; + unsigned group = pwm->hwpwm / 2; + unsigned index = pwm->hwpwm % 2; + unsigned cmr; + enum pwm_polarity polarity = tcbpwm->polarity; + + /* + * If duty is 0 the timer will be stopped and we have to + * configure the output correctly on software trigger: + * - set output to high if PWM_POLARITY_INVERSED + * - set output to low if PWM_POLARITY_NORMAL + * + * This is why we're reverting polarity in this case. + */ + if (tcbpwm->duty == 0) + polarity = !polarity; + + spin_lock(&tcbpwmc->lock); + cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR)); + + /* flush old setting and set the new one */ + if (index == 0) { + cmr &= ~ATMEL_TC_ACMR_MASK; + if (polarity == PWM_POLARITY_INVERSED) + cmr |= ATMEL_TC_ASWTRG_CLEAR; + else + cmr |= ATMEL_TC_ASWTRG_SET; + } else { + cmr &= ~ATMEL_TC_BCMR_MASK; + if (polarity == PWM_POLARITY_INVERSED) + cmr |= ATMEL_TC_BSWTRG_CLEAR; + else + cmr |= ATMEL_TC_BSWTRG_SET; + } + + __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR)); + + /* + * Use software trigger to apply the new setting. + * If both PWM devices in this group are disabled we stop the clock. + */ + if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) + __raw_writel(ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS, + regs + ATMEL_TC_REG(group, CCR)); + else + __raw_writel(ATMEL_TC_SWTRG, regs + + ATMEL_TC_REG(group, CCR)); + + spin_unlock(&tcbpwmc->lock); +} + +static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); + struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); + struct atmel_tc *tc = tcbpwmc->tc; + void __iomem *regs = tc->regs; + unsigned group = pwm->hwpwm / 2; + unsigned index = pwm->hwpwm % 2; + u32 cmr; + enum pwm_polarity polarity = tcbpwm->polarity; + + /* + * If duty is 0 the timer will be stopped and we have to + * configure the output correctly on software trigger: + * - set output to high if PWM_POLARITY_INVERSED + * - set output to low if PWM_POLARITY_NORMAL + * + * This is why we're reverting polarity in this case. + */ + if (tcbpwm->duty == 0) + polarity = !polarity; + + spin_lock(&tcbpwmc->lock); + cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR)); + + /* flush old setting and set the new one */ + cmr &= ~ATMEL_TC_TCCLKS; + + if (index == 0) { + cmr &= ~ATMEL_TC_ACMR_MASK; + + /* Set CMR flags according to given polarity */ + if (polarity == PWM_POLARITY_INVERSED) + cmr |= ATMEL_TC_ASWTRG_CLEAR; + else + cmr |= ATMEL_TC_ASWTRG_SET; + } else { + cmr &= ~ATMEL_TC_BCMR_MASK; + if (polarity == PWM_POLARITY_INVERSED) + cmr |= ATMEL_TC_BSWTRG_CLEAR; + else + cmr |= ATMEL_TC_BSWTRG_SET; + } + + /* + * If duty is 0 or equal to period there's no need to register + * a specific action on RA/RB and RC compare. + * The output will be configured on software trigger and keep + * this config till next config call. + */ + if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) { + if (index == 0) { + if (polarity == PWM_POLARITY_INVERSED) + cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR; + else + cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET; + } else { + if (polarity == PWM_POLARITY_INVERSED) + cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR; + else + cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET; + } + } + + cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS); + + __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR)); + + if (index == 0) + __raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RA)); + else + __raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RB)); + + __raw_writel(tcbpwm->period, regs + ATMEL_TC_REG(group, RC)); + + /* Use software trigger to apply the new setting */ + __raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG, + regs + ATMEL_TC_REG(group, CCR)); + spin_unlock(&tcbpwmc->lock); + return 0; +} + +static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); + struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); + unsigned group = pwm->hwpwm / 2; + unsigned index = pwm->hwpwm % 2; + struct atmel_tcb_pwm_device *atcbpwm = NULL; + struct atmel_tc *tc = tcbpwmc->tc; + int i; + int slowclk = 0; + unsigned period; + unsigned duty; + unsigned rate = clk_get_rate(tc->clk[group]); + unsigned long long min; + unsigned long long max; + + /* + * Find best clk divisor: + * the smallest divisor which can fulfill the period_ns requirements. + */ + for (i = 0; i < 5; ++i) { + if (atmel_tc_divisors[i] == 0) { + slowclk = i; + continue; + } + min = div_u64((u64)NSEC_PER_SEC * atmel_tc_divisors[i], rate); + max = min << tc->tcb_config->counter_width; + if (max >= period_ns) + break; + } + + /* + * If none of the divisor are small enough to represent period_ns + * take slow clock (32KHz). + */ + if (i == 5) { + i = slowclk; + rate = 32768; + min = div_u64(NSEC_PER_SEC, rate); + max = min << tc->tcb_config->counter_width; + + /* If period is too big return ERANGE error */ + if (max < period_ns) + return -ERANGE; + } + + duty = div_u64(duty_ns, min); + period = div_u64(period_ns, min); + + if (index == 0) + atcbpwm = tcbpwmc->pwms[pwm->hwpwm + 1]; + else + atcbpwm = tcbpwmc->pwms[pwm->hwpwm - 1]; + + /* + * PWM devices provided by TCB driver are grouped by 2: + * - group 0: PWM 0 & 1 + * - group 1: PWM 2 & 3 + * - group 2: PWM 4 & 5 + * + * PWM devices in a given group must be configured with the + * same period_ns. + * + * We're checking the period value of the second PWM device + * in this group before applying the new config. + */ + if ((atcbpwm && atcbpwm->duty > 0 && + atcbpwm->duty != atcbpwm->period) && + (atcbpwm->div != i || atcbpwm->period != period)) { + dev_err(chip->dev, + "failed to configure period_ns: PWM group already configured with a different value\n"); + return -EINVAL; + } + + tcbpwm->period = period; + tcbpwm->div = i; + tcbpwm->duty = duty; + + /* If the PWM is enabled, call enable to apply the new conf */ + if (test_bit(PWMF_ENABLED, &pwm->flags)) + atmel_tcb_pwm_enable(chip, pwm); + + return 0; +} + +static const struct pwm_ops atmel_tcb_pwm_ops = { + .request = atmel_tcb_pwm_request, + .free = atmel_tcb_pwm_free, + .config = atmel_tcb_pwm_config, + .set_polarity = atmel_tcb_pwm_set_polarity, + .enable = atmel_tcb_pwm_enable, + .disable = atmel_tcb_pwm_disable, + .owner = THIS_MODULE, +}; + +static int atmel_tcb_pwm_probe(struct platform_device *pdev) +{ + struct atmel_tcb_pwm_chip *tcbpwm; + struct device_node *np = pdev->dev.of_node; + struct atmel_tc *tc; + int err; + int tcblock; + + err = of_property_read_u32(np, "tc-block", &tcblock); + if (err < 0) { + dev_err(&pdev->dev, + "failed to get Timer Counter Block number from device tree (error: %d)\n", + err); + return err; + } + + tc = atmel_tc_alloc(tcblock); + if (tc == NULL) { + dev_err(&pdev->dev, "failed to allocate Timer Counter Block\n"); + return -ENOMEM; + } + + tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL); + if (tcbpwm == NULL) { + atmel_tc_free(tc); + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + tcbpwm->chip.dev = &pdev->dev; + tcbpwm->chip.ops = &atmel_tcb_pwm_ops; + tcbpwm->chip.of_xlate = of_pwm_xlate_with_flags; + tcbpwm->chip.of_pwm_n_cells = 3; + tcbpwm->chip.base = -1; + tcbpwm->chip.npwm = NPWM; + tcbpwm->tc = tc; + + spin_lock_init(&tcbpwm->lock); + + err = pwmchip_add(&tcbpwm->chip); + if (err < 0) { + atmel_tc_free(tc); + return err; + } + + platform_set_drvdata(pdev, tcbpwm); + + return 0; +} + +static int atmel_tcb_pwm_remove(struct platform_device *pdev) +{ + struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev); + int err; + + err = pwmchip_remove(&tcbpwm->chip); + if (err < 0) + return err; + + atmel_tc_free(tcbpwm->tc); + + return 0; +} + +static const struct of_device_id atmel_tcb_pwm_dt_ids[] = { + { .compatible = "atmel,tcb-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids); + +static struct platform_driver atmel_tcb_pwm_driver = { + .driver = { + .name = "atmel-tcb-pwm", + .of_match_table = atmel_tcb_pwm_dt_ids, + }, + .probe = atmel_tcb_pwm_probe, + .remove = atmel_tcb_pwm_remove, +}; +module_platform_driver(atmel_tcb_pwm_driver); + +MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>"); +MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c new file mode 100644 index 000000000..d3c22de9e --- /dev/null +++ b/drivers/pwm/pwm-atmel.c @@ -0,0 +1,399 @@ +/* + * Driver for Atmel Pulse Width Modulation Controller + * + * Copyright (C) 2013 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * Licensed under GPLv2. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> + +/* The following is global registers for PWM controller */ +#define PWM_ENA 0x04 +#define PWM_DIS 0x08 +#define PWM_SR 0x0C +/* Bit field in SR */ +#define PWM_SR_ALL_CH_ON 0x0F + +/* The following register is PWM channel related registers */ +#define PWM_CH_REG_OFFSET 0x200 +#define PWM_CH_REG_SIZE 0x20 + +#define PWM_CMR 0x0 +/* Bit field in CMR */ +#define PWM_CMR_CPOL (1 << 9) +#define PWM_CMR_UPD_CDTY (1 << 10) +#define PWM_CMR_CPRE_MSK 0xF + +/* The following registers for PWM v1 */ +#define PWMV1_CDTY 0x04 +#define PWMV1_CPRD 0x08 +#define PWMV1_CUPD 0x10 + +/* The following registers for PWM v2 */ +#define PWMV2_CDTY 0x04 +#define PWMV2_CDTYUPD 0x08 +#define PWMV2_CPRD 0x0C +#define PWMV2_CPRDUPD 0x10 + +/* + * Max value for duty and period + * + * Although the duty and period register is 32 bit, + * however only the LSB 16 bits are significant. + */ +#define PWM_MAX_DTY 0xFFFF +#define PWM_MAX_PRD 0xFFFF +#define PRD_MAX_PRES 10 + +struct atmel_pwm_chip { + struct pwm_chip chip; + struct clk *clk; + void __iomem *base; + + void (*config)(struct pwm_chip *chip, struct pwm_device *pwm, + unsigned long dty, unsigned long prd); +}; + +static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct atmel_pwm_chip, chip); +} + +static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip, + unsigned long offset) +{ + return readl_relaxed(chip->base + offset); +} + +static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip, + unsigned long offset, unsigned long val) +{ + writel_relaxed(val, chip->base + offset); +} + +static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip, + unsigned int ch, unsigned long offset) +{ + unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; + + return readl_relaxed(chip->base + base + offset); +} + +static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip, + unsigned int ch, unsigned long offset, + unsigned long val) +{ + unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; + + writel_relaxed(val, chip->base + base + offset); +} + +static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + unsigned long prd, dty; + unsigned long long div; + unsigned int pres = 0; + u32 val; + int ret; + + if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) { + dev_err(chip->dev, "cannot change PWM period while enabled\n"); + return -EBUSY; + } + + /* Calculate the period cycles and prescale value */ + div = (unsigned long long)clk_get_rate(atmel_pwm->clk) * period_ns; + do_div(div, NSEC_PER_SEC); + + while (div > PWM_MAX_PRD) { + div >>= 1; + pres++; + } + + if (pres > PRD_MAX_PRES) { + dev_err(chip->dev, "pres exceeds the maximum value\n"); + return -EINVAL; + } + + /* Calculate the duty cycles */ + prd = div; + div *= duty_ns; + do_div(div, period_ns); + dty = prd - div; + + ret = clk_enable(atmel_pwm->clk); + if (ret) { + dev_err(chip->dev, "failed to enable PWM clock\n"); + return ret; + } + + /* It is necessary to preserve CPOL, inside CMR */ + val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); + val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK); + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); + atmel_pwm->config(chip, pwm, dty, prd); + + clk_disable(atmel_pwm->clk); + return ret; +} + +static void atmel_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm, + unsigned long dty, unsigned long prd) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + unsigned int val; + + if (test_bit(PWMF_ENABLED, &pwm->flags)) { + /* + * If the PWM channel is enabled, using the update register, + * it needs to set bit 10 of CMR to 0 + */ + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CUPD, dty); + + val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); + val &= ~PWM_CMR_UPD_CDTY; + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); + } else { + /* + * If the PWM channel is disabled, write value to duty and + * period registers directly. + */ + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CDTY, dty); + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CPRD, prd); + } +} + +static void atmel_pwm_config_v2(struct pwm_chip *chip, struct pwm_device *pwm, + unsigned long dty, unsigned long prd) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + + if (test_bit(PWMF_ENABLED, &pwm->flags)) { + /* + * If the PWM channel is enabled, using the duty update register + * to update the value. + */ + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTYUPD, dty); + } else { + /* + * If the PWM channel is disabled, write value to duty and + * period registers directly. + */ + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTY, dty); + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CPRD, prd); + } +} + +static int atmel_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + u32 val; + int ret; + + val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); + + if (polarity == PWM_POLARITY_NORMAL) + val &= ~PWM_CMR_CPOL; + else + val |= PWM_CMR_CPOL; + + ret = clk_enable(atmel_pwm->clk); + if (ret) { + dev_err(chip->dev, "failed to enable PWM clock\n"); + return ret; + } + + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); + + clk_disable(atmel_pwm->clk); + + return 0; +} + +static int atmel_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + int ret; + + ret = clk_enable(atmel_pwm->clk); + if (ret) { + dev_err(chip->dev, "failed to enable PWM clock\n"); + return ret; + } + + atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm); + + return 0; +} + +static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + + atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm); + + clk_disable(atmel_pwm->clk); +} + +static const struct pwm_ops atmel_pwm_ops = { + .config = atmel_pwm_config, + .set_polarity = atmel_pwm_set_polarity, + .enable = atmel_pwm_enable, + .disable = atmel_pwm_disable, + .owner = THIS_MODULE, +}; + +struct atmel_pwm_data { + void (*config)(struct pwm_chip *chip, struct pwm_device *pwm, + unsigned long dty, unsigned long prd); +}; + +static const struct atmel_pwm_data atmel_pwm_data_v1 = { + .config = atmel_pwm_config_v1, +}; + +static const struct atmel_pwm_data atmel_pwm_data_v2 = { + .config = atmel_pwm_config_v2, +}; + +static const struct platform_device_id atmel_pwm_devtypes[] = { + { + .name = "at91sam9rl-pwm", + .driver_data = (kernel_ulong_t)&atmel_pwm_data_v1, + }, { + .name = "sama5d3-pwm", + .driver_data = (kernel_ulong_t)&atmel_pwm_data_v2, + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(platform, atmel_pwm_devtypes); + +static const struct of_device_id atmel_pwm_dt_ids[] = { + { + .compatible = "atmel,at91sam9rl-pwm", + .data = &atmel_pwm_data_v1, + }, { + .compatible = "atmel,sama5d3-pwm", + .data = &atmel_pwm_data_v2, + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids); + +static inline const struct atmel_pwm_data * +atmel_pwm_get_driver_data(struct platform_device *pdev) +{ + if (pdev->dev.of_node) { + const struct of_device_id *match; + + match = of_match_device(atmel_pwm_dt_ids, &pdev->dev); + if (!match) + return NULL; + + return match->data; + } else { + const struct platform_device_id *id; + + id = platform_get_device_id(pdev); + + return (struct atmel_pwm_data *)id->driver_data; + } +} + +static int atmel_pwm_probe(struct platform_device *pdev) +{ + const struct atmel_pwm_data *data; + struct atmel_pwm_chip *atmel_pwm; + struct resource *res; + int ret; + + data = atmel_pwm_get_driver_data(pdev); + if (!data) + return -ENODEV; + + atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL); + if (!atmel_pwm) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(atmel_pwm->base)) + return PTR_ERR(atmel_pwm->base); + + atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(atmel_pwm->clk)) + return PTR_ERR(atmel_pwm->clk); + + ret = clk_prepare(atmel_pwm->clk); + if (ret) { + dev_err(&pdev->dev, "failed to prepare PWM clock\n"); + return ret; + } + + atmel_pwm->chip.dev = &pdev->dev; + atmel_pwm->chip.ops = &atmel_pwm_ops; + + if (pdev->dev.of_node) { + atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags; + atmel_pwm->chip.of_pwm_n_cells = 3; + } + + atmel_pwm->chip.base = -1; + atmel_pwm->chip.npwm = 4; + atmel_pwm->chip.can_sleep = true; + atmel_pwm->config = data->config; + + ret = pwmchip_add(&atmel_pwm->chip); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret); + goto unprepare_clk; + } + + platform_set_drvdata(pdev, atmel_pwm); + + return ret; + +unprepare_clk: + clk_unprepare(atmel_pwm->clk); + return ret; +} + +static int atmel_pwm_remove(struct platform_device *pdev) +{ + struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev); + + clk_unprepare(atmel_pwm->clk); + + return pwmchip_remove(&atmel_pwm->chip); +} + +static struct platform_driver atmel_pwm_driver = { + .driver = { + .name = "atmel-pwm", + .of_match_table = of_match_ptr(atmel_pwm_dt_ids), + }, + .id_table = atmel_pwm_devtypes, + .probe = atmel_pwm_probe, + .remove = atmel_pwm_remove, +}; +module_platform_driver(atmel_pwm_driver); + +MODULE_ALIAS("platform:atmel-pwm"); +MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); +MODULE_DESCRIPTION("Atmel PWM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c new file mode 100644 index 000000000..02bc04889 --- /dev/null +++ b/drivers/pwm/pwm-bcm-kona.c @@ -0,0 +1,318 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> +#include <linux/types.h> + +/* + * The Kona PWM has some unusual characteristics. Here are the main points. + * + * 1) There is no disable bit and the hardware docs advise programming a zero + * duty to achieve output equivalent to that of a normal disable operation. + * + * 2) Changes to prescale, duty, period, and polarity do not take effect until + * a subsequent rising edge of the trigger bit. + * + * 3) If the smooth bit and trigger bit are both low, the output is a constant + * high signal. Otherwise, the earlier waveform continues to be output. + * + * 4) If the smooth bit is set on the rising edge of the trigger bit, output + * will transition to the new settings on a period boundary (which could be + * seconds away). If the smooth bit is clear, new settings will be applied + * as soon as possible (the hardware always has a 400ns delay). + * + * 5) When the external clock that feeds the PWM is disabled, output is pegged + * high or low depending on its state at that exact instant. + */ + +#define PWM_CONTROL_OFFSET (0x00000000) +#define PWM_CONTROL_SMOOTH_SHIFT(chan) (24 + (chan)) +#define PWM_CONTROL_TYPE_SHIFT(chan) (16 + (chan)) +#define PWM_CONTROL_POLARITY_SHIFT(chan) (8 + (chan)) +#define PWM_CONTROL_TRIGGER_SHIFT(chan) (chan) + +#define PRESCALE_OFFSET (0x00000004) +#define PRESCALE_SHIFT(chan) ((chan) << 2) +#define PRESCALE_MASK(chan) (0x7 << PRESCALE_SHIFT(chan)) +#define PRESCALE_MIN (0x00000000) +#define PRESCALE_MAX (0x00000007) + +#define PERIOD_COUNT_OFFSET(chan) (0x00000008 + ((chan) << 3)) +#define PERIOD_COUNT_MIN (0x00000002) +#define PERIOD_COUNT_MAX (0x00ffffff) + +#define DUTY_CYCLE_HIGH_OFFSET(chan) (0x0000000c + ((chan) << 3)) +#define DUTY_CYCLE_HIGH_MIN (0x00000000) +#define DUTY_CYCLE_HIGH_MAX (0x00ffffff) + +struct kona_pwmc { + struct pwm_chip chip; + void __iomem *base; + struct clk *clk; +}; + +static inline struct kona_pwmc *to_kona_pwmc(struct pwm_chip *_chip) +{ + return container_of(_chip, struct kona_pwmc, chip); +} + +static void kona_pwmc_apply_settings(struct kona_pwmc *kp, unsigned int chan) +{ + unsigned int value = readl(kp->base + PWM_CONTROL_OFFSET); + + /* Clear trigger bit but set smooth bit to maintain old output */ + value |= 1 << PWM_CONTROL_SMOOTH_SHIFT(chan); + value &= ~(1 << PWM_CONTROL_TRIGGER_SHIFT(chan)); + writel(value, kp->base + PWM_CONTROL_OFFSET); + + /* Set trigger bit and clear smooth bit to apply new settings */ + value &= ~(1 << PWM_CONTROL_SMOOTH_SHIFT(chan)); + value |= 1 << PWM_CONTROL_TRIGGER_SHIFT(chan); + writel(value, kp->base + PWM_CONTROL_OFFSET); +} + +static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct kona_pwmc *kp = to_kona_pwmc(chip); + u64 val, div, rate; + unsigned long prescale = PRESCALE_MIN, pc, dc; + unsigned int value, chan = pwm->hwpwm; + + /* + * Find period count, duty count and prescale to suit duty_ns and + * period_ns. This is done according to formulas described below: + * + * period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE + * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE + * + * PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1)) + * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1)) + */ + + rate = clk_get_rate(kp->clk); + + while (1) { + div = 1000000000; + div *= 1 + prescale; + val = rate * period_ns; + pc = div64_u64(val, div); + val = rate * duty_ns; + dc = div64_u64(val, div); + + /* If duty_ns or period_ns are not achievable then return */ + if (pc < PERIOD_COUNT_MIN || dc < DUTY_CYCLE_HIGH_MIN) + return -EINVAL; + + /* If pc and dc are in bounds, the calculation is done */ + if (pc <= PERIOD_COUNT_MAX && dc <= DUTY_CYCLE_HIGH_MAX) + break; + + /* Otherwise, increase prescale and recalculate pc and dc */ + if (++prescale > PRESCALE_MAX) + return -EINVAL; + } + + /* If the PWM channel is enabled, write the settings to the HW */ + if (test_bit(PWMF_ENABLED, &pwm->flags)) { + value = readl(kp->base + PRESCALE_OFFSET); + value &= ~PRESCALE_MASK(chan); + value |= prescale << PRESCALE_SHIFT(chan); + writel(value, kp->base + PRESCALE_OFFSET); + + writel(pc, kp->base + PERIOD_COUNT_OFFSET(chan)); + + writel(dc, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan)); + + kona_pwmc_apply_settings(kp, chan); + } + + return 0; +} + +static int kona_pwmc_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct kona_pwmc *kp = to_kona_pwmc(chip); + unsigned int chan = pwm->hwpwm; + unsigned int value; + int ret; + + ret = clk_prepare_enable(kp->clk); + if (ret < 0) { + dev_err(chip->dev, "failed to enable clock: %d\n", ret); + return ret; + } + + value = readl(kp->base + PWM_CONTROL_OFFSET); + + if (polarity == PWM_POLARITY_NORMAL) + value |= 1 << PWM_CONTROL_POLARITY_SHIFT(chan); + else + value &= ~(1 << PWM_CONTROL_POLARITY_SHIFT(chan)); + + writel(value, kp->base + PWM_CONTROL_OFFSET); + + kona_pwmc_apply_settings(kp, chan); + + /* Wait for waveform to settle before gating off the clock */ + ndelay(400); + + clk_disable_unprepare(kp->clk); + + return 0; +} + +static int kona_pwmc_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct kona_pwmc *kp = to_kona_pwmc(chip); + int ret; + + ret = clk_prepare_enable(kp->clk); + if (ret < 0) { + dev_err(chip->dev, "failed to enable clock: %d\n", ret); + return ret; + } + + ret = kona_pwmc_config(chip, pwm, pwm->duty_cycle, pwm->period); + if (ret < 0) { + clk_disable_unprepare(kp->clk); + return ret; + } + + return 0; +} + +static void kona_pwmc_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct kona_pwmc *kp = to_kona_pwmc(chip); + unsigned int chan = pwm->hwpwm; + + /* Simulate a disable by configuring for zero duty */ + writel(0, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan)); + kona_pwmc_apply_settings(kp, chan); + + /* Wait for waveform to settle before gating off the clock */ + ndelay(400); + + clk_disable_unprepare(kp->clk); +} + +static const struct pwm_ops kona_pwm_ops = { + .config = kona_pwmc_config, + .set_polarity = kona_pwmc_set_polarity, + .enable = kona_pwmc_enable, + .disable = kona_pwmc_disable, + .owner = THIS_MODULE, +}; + +static int kona_pwmc_probe(struct platform_device *pdev) +{ + struct kona_pwmc *kp; + struct resource *res; + unsigned int chan; + unsigned int value = 0; + int ret = 0; + + kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL); + if (kp == NULL) + return -ENOMEM; + + platform_set_drvdata(pdev, kp); + + kp->chip.dev = &pdev->dev; + kp->chip.ops = &kona_pwm_ops; + kp->chip.base = -1; + kp->chip.npwm = 6; + kp->chip.of_xlate = of_pwm_xlate_with_flags; + kp->chip.of_pwm_n_cells = 3; + kp->chip.can_sleep = true; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + kp->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kp->base)) + return PTR_ERR(kp->base); + + kp->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(kp->clk)) { + dev_err(&pdev->dev, "failed to get clock: %ld\n", + PTR_ERR(kp->clk)); + return PTR_ERR(kp->clk); + } + + ret = clk_prepare_enable(kp->clk); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable clock: %d\n", ret); + return ret; + } + + /* Set smooth mode, push/pull, and normal polarity for all channels */ + for (chan = 0; chan < kp->chip.npwm; chan++) { + value |= (1 << PWM_CONTROL_SMOOTH_SHIFT(chan)); + value |= (1 << PWM_CONTROL_TYPE_SHIFT(chan)); + value |= (1 << PWM_CONTROL_POLARITY_SHIFT(chan)); + } + + writel(value, kp->base + PWM_CONTROL_OFFSET); + + clk_disable_unprepare(kp->clk); + + ret = pwmchip_add(&kp->chip); + if (ret < 0) + dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); + + return ret; +} + +static int kona_pwmc_remove(struct platform_device *pdev) +{ + struct kona_pwmc *kp = platform_get_drvdata(pdev); + unsigned int chan; + + for (chan = 0; chan < kp->chip.npwm; chan++) + if (test_bit(PWMF_ENABLED, &kp->chip.pwms[chan].flags)) + clk_disable_unprepare(kp->clk); + + return pwmchip_remove(&kp->chip); +} + +static const struct of_device_id bcm_kona_pwmc_dt[] = { + { .compatible = "brcm,kona-pwm" }, + { }, +}; +MODULE_DEVICE_TABLE(of, bcm_kona_pwmc_dt); + +static struct platform_driver kona_pwmc_driver = { + .driver = { + .name = "bcm-kona-pwm", + .of_match_table = bcm_kona_pwmc_dt, + }, + .probe = kona_pwmc_probe, + .remove = kona_pwmc_remove, +}; +module_platform_driver(kona_pwmc_driver); + +MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>"); +MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom Kona PWM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-bcm2835.c b/drivers/pwm/pwm-bcm2835.c new file mode 100644 index 000000000..b4c7f956b --- /dev/null +++ b/drivers/pwm/pwm-bcm2835.c @@ -0,0 +1,205 @@ +/* + * Copyright 2014 Bart Tanghe <bart.tanghe@thomasmore.be> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> + +#define PWM_CONTROL 0x000 +#define PWM_CONTROL_SHIFT(x) ((x) * 8) +#define PWM_CONTROL_MASK 0xff +#define PWM_MODE 0x80 /* set timer in PWM mode */ +#define PWM_ENABLE (1 << 0) +#define PWM_POLARITY (1 << 4) + +#define PERIOD(x) (((x) * 0x10) + 0x10) +#define DUTY(x) (((x) * 0x10) + 0x14) + +#define MIN_PERIOD 108 /* 9.2 MHz max. PWM clock */ + +struct bcm2835_pwm { + struct pwm_chip chip; + struct device *dev; + unsigned long scaler; + void __iomem *base; + struct clk *clk; +}; + +static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip) +{ + return container_of(chip, struct bcm2835_pwm, chip); +} + +static int bcm2835_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); + u32 value; + + value = readl(pc->base + PWM_CONTROL); + value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm)); + value |= (PWM_MODE << PWM_CONTROL_SHIFT(pwm->hwpwm)); + writel(value, pc->base + PWM_CONTROL); + + return 0; +} + +static void bcm2835_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); + u32 value; + + value = readl(pc->base + PWM_CONTROL); + value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm)); + writel(value, pc->base + PWM_CONTROL); +} + +static int bcm2835_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); + + if (period_ns <= MIN_PERIOD) { + dev_err(pc->dev, "period %d not supported, minimum %d\n", + period_ns, MIN_PERIOD); + return -EINVAL; + } + + writel(duty_ns / pc->scaler, pc->base + DUTY(pwm->hwpwm)); + writel(period_ns / pc->scaler, pc->base + PERIOD(pwm->hwpwm)); + + return 0; +} + +static int bcm2835_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); + u32 value; + + value = readl(pc->base + PWM_CONTROL); + value |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm); + writel(value, pc->base + PWM_CONTROL); + + return 0; +} + +static void bcm2835_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); + u32 value; + + value = readl(pc->base + PWM_CONTROL); + value &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm)); + writel(value, pc->base + PWM_CONTROL); +} + +static int bcm2835_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); + u32 value; + + value = readl(pc->base + PWM_CONTROL); + + if (polarity == PWM_POLARITY_NORMAL) + value &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm)); + else + value |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm); + + writel(value, pc->base + PWM_CONTROL); + + return 0; +} + +static const struct pwm_ops bcm2835_pwm_ops = { + .request = bcm2835_pwm_request, + .free = bcm2835_pwm_free, + .config = bcm2835_pwm_config, + .enable = bcm2835_pwm_enable, + .disable = bcm2835_pwm_disable, + .set_polarity = bcm2835_set_polarity, + .owner = THIS_MODULE, +}; + +static int bcm2835_pwm_probe(struct platform_device *pdev) +{ + struct bcm2835_pwm *pc; + struct resource *res; + int ret; + + pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); + if (!pc) + return -ENOMEM; + + pc->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pc->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pc->base)) + return PTR_ERR(pc->base); + + pc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pc->clk)) { + dev_err(&pdev->dev, "clock not found: %ld\n", PTR_ERR(pc->clk)); + return PTR_ERR(pc->clk); + } + + ret = clk_prepare_enable(pc->clk); + if (ret) + return ret; + + pc->scaler = NSEC_PER_SEC / clk_get_rate(pc->clk); + + pc->chip.dev = &pdev->dev; + pc->chip.ops = &bcm2835_pwm_ops; + pc->chip.npwm = 2; + + platform_set_drvdata(pdev, pc); + + ret = pwmchip_add(&pc->chip); + if (ret < 0) + goto add_fail; + + return 0; + +add_fail: + clk_disable_unprepare(pc->clk); + return ret; +} + +static int bcm2835_pwm_remove(struct platform_device *pdev) +{ + struct bcm2835_pwm *pc = platform_get_drvdata(pdev); + + clk_disable_unprepare(pc->clk); + + return pwmchip_remove(&pc->chip); +} + +static const struct of_device_id bcm2835_pwm_of_match[] = { + { .compatible = "brcm,bcm2835-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, bcm2835_pwm_of_match); + +static struct platform_driver bcm2835_pwm_driver = { + .driver = { + .name = "bcm2835-pwm", + .of_match_table = bcm2835_pwm_of_match, + }, + .probe = bcm2835_pwm_probe, + .remove = bcm2835_pwm_remove, +}; +module_platform_driver(bcm2835_pwm_driver); + +MODULE_AUTHOR("Bart Tanghe <bart.tanghe@thomasmore.be"); +MODULE_DESCRIPTION("Broadcom BCM2835 PWM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-bfin.c b/drivers/pwm/pwm-bfin.c new file mode 100644 index 000000000..7631ef194 --- /dev/null +++ b/drivers/pwm/pwm-bfin.c @@ -0,0 +1,159 @@ +/* + * Blackfin Pulse Width Modulation (PWM) core + * + * Copyright (c) 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> + +#include <asm/gptimers.h> +#include <asm/portmux.h> + +struct bfin_pwm_chip { + struct pwm_chip chip; +}; + +struct bfin_pwm { + unsigned short pin; +}; + +static const unsigned short pwm_to_gptimer_per[] = { + P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR4, P_TMR5, + P_TMR6, P_TMR7, P_TMR8, P_TMR9, P_TMR10, P_TMR11, +}; + +static int bfin_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bfin_pwm *priv; + int ret; + + if (pwm->hwpwm >= ARRAY_SIZE(pwm_to_gptimer_per)) + return -EINVAL; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->pin = pwm_to_gptimer_per[pwm->hwpwm]; + + ret = peripheral_request(priv->pin, NULL); + if (ret) { + kfree(priv); + return ret; + } + + pwm_set_chip_data(pwm, priv); + + return 0; +} + +static void bfin_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bfin_pwm *priv = pwm_get_chip_data(pwm); + + if (priv) { + peripheral_free(priv->pin); + kfree(priv); + } +} + +static int bfin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct bfin_pwm *priv = pwm_get_chip_data(pwm); + unsigned long period, duty; + unsigned long long val; + + val = (unsigned long long)get_sclk() * period_ns; + do_div(val, NSEC_PER_SEC); + period = val; + + val = (unsigned long long)period * duty_ns; + do_div(val, period_ns); + duty = period - val; + + if (duty >= period) + duty = period - 1; + + set_gptimer_config(priv->pin, TIMER_MODE_PWM | TIMER_PERIOD_CNT); + set_gptimer_pwidth(priv->pin, duty); + set_gptimer_period(priv->pin, period); + + return 0; +} + +static int bfin_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bfin_pwm *priv = pwm_get_chip_data(pwm); + + enable_gptimer(priv->pin); + + return 0; +} + +static void bfin_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct bfin_pwm *priv = pwm_get_chip_data(pwm); + + disable_gptimer(priv->pin); +} + +static struct pwm_ops bfin_pwm_ops = { + .request = bfin_pwm_request, + .free = bfin_pwm_free, + .config = bfin_pwm_config, + .enable = bfin_pwm_enable, + .disable = bfin_pwm_disable, + .owner = THIS_MODULE, +}; + +static int bfin_pwm_probe(struct platform_device *pdev) +{ + struct bfin_pwm_chip *pwm; + int ret; + + pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); + if (!pwm) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, pwm); + + pwm->chip.dev = &pdev->dev; + pwm->chip.ops = &bfin_pwm_ops; + pwm->chip.base = -1; + pwm->chip.npwm = 12; + + ret = pwmchip_add(&pwm->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + return 0; +} + +static int bfin_pwm_remove(struct platform_device *pdev) +{ + struct bfin_pwm_chip *pwm = platform_get_drvdata(pdev); + + return pwmchip_remove(&pwm->chip); +} + +static struct platform_driver bfin_pwm_driver = { + .driver = { + .name = "bfin-pwm", + }, + .probe = bfin_pwm_probe, + .remove = bfin_pwm_remove, +}; + +module_platform_driver(bfin_pwm_driver); + +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-clps711x.c b/drivers/pwm/pwm-clps711x.c new file mode 100644 index 000000000..a80c10803 --- /dev/null +++ b/drivers/pwm/pwm-clps711x.c @@ -0,0 +1,175 @@ +/* + * Cirrus Logic CLPS711X PWM driver + * + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> + +struct clps711x_chip { + struct pwm_chip chip; + void __iomem *pmpcon; + struct clk *clk; + spinlock_t lock; +}; + +static inline struct clps711x_chip *to_clps711x_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct clps711x_chip, chip); +} + +static void clps711x_pwm_update_val(struct clps711x_chip *priv, u32 n, u32 v) +{ + /* PWM0 - bits 4..7, PWM1 - bits 8..11 */ + u32 shift = (n + 1) * 4; + unsigned long flags; + u32 tmp; + + spin_lock_irqsave(&priv->lock, flags); + + tmp = readl(priv->pmpcon); + tmp &= ~(0xf << shift); + tmp |= v << shift; + writel(tmp, priv->pmpcon); + + spin_unlock_irqrestore(&priv->lock, flags); +} + +static unsigned int clps711x_get_duty(struct pwm_device *pwm, unsigned int v) +{ + /* Duty cycle 0..15 max */ + return DIV_ROUND_CLOSEST(v * 0xf, pwm_get_period(pwm)); +} + +static int clps711x_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct clps711x_chip *priv = to_clps711x_chip(chip); + unsigned int freq = clk_get_rate(priv->clk); + + if (!freq) + return -EINVAL; + + /* Store constant period value */ + pwm_set_period(pwm, DIV_ROUND_CLOSEST(NSEC_PER_SEC, freq)); + + return 0; +} + +static int clps711x_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct clps711x_chip *priv = to_clps711x_chip(chip); + unsigned int duty; + + if (period_ns != pwm_get_period(pwm)) + return -EINVAL; + + duty = clps711x_get_duty(pwm, duty_ns); + clps711x_pwm_update_val(priv, pwm->hwpwm, duty); + + return 0; +} + +static int clps711x_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct clps711x_chip *priv = to_clps711x_chip(chip); + unsigned int duty; + + duty = clps711x_get_duty(pwm, pwm_get_duty_cycle(pwm)); + clps711x_pwm_update_val(priv, pwm->hwpwm, duty); + + return 0; +} + +static void clps711x_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct clps711x_chip *priv = to_clps711x_chip(chip); + + clps711x_pwm_update_val(priv, pwm->hwpwm, 0); +} + +static const struct pwm_ops clps711x_pwm_ops = { + .request = clps711x_pwm_request, + .config = clps711x_pwm_config, + .enable = clps711x_pwm_enable, + .disable = clps711x_pwm_disable, + .owner = THIS_MODULE, +}; + +static struct pwm_device *clps711x_pwm_xlate(struct pwm_chip *chip, + const struct of_phandle_args *args) +{ + if (args->args[0] >= chip->npwm) + return ERR_PTR(-EINVAL); + + return pwm_request_from_chip(chip, args->args[0], NULL); +} + +static int clps711x_pwm_probe(struct platform_device *pdev) +{ + struct clps711x_chip *priv; + struct resource *res; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->pmpcon = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->pmpcon)) + return PTR_ERR(priv->pmpcon); + + priv->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + priv->chip.ops = &clps711x_pwm_ops; + priv->chip.dev = &pdev->dev; + priv->chip.base = -1; + priv->chip.npwm = 2; + priv->chip.of_xlate = clps711x_pwm_xlate; + priv->chip.of_pwm_n_cells = 1; + + spin_lock_init(&priv->lock); + + platform_set_drvdata(pdev, priv); + + return pwmchip_add(&priv->chip); +} + +static int clps711x_pwm_remove(struct platform_device *pdev) +{ + struct clps711x_chip *priv = platform_get_drvdata(pdev); + + return pwmchip_remove(&priv->chip); +} + +static const struct of_device_id __maybe_unused clps711x_pwm_dt_ids[] = { + { .compatible = "cirrus,clps711x-pwm", }, + { } +}; +MODULE_DEVICE_TABLE(of, clps711x_pwm_dt_ids); + +static struct platform_driver clps711x_pwm_driver = { + .driver = { + .name = "clps711x-pwm", + .of_match_table = of_match_ptr(clps711x_pwm_dt_ids), + }, + .probe = clps711x_pwm_probe, + .remove = clps711x_pwm_remove, +}; +module_platform_driver(clps711x_pwm_driver); + +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); +MODULE_DESCRIPTION("Cirrus Logic CLPS711X PWM driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c new file mode 100644 index 000000000..e593e9c45 --- /dev/null +++ b/drivers/pwm/pwm-ep93xx.c @@ -0,0 +1,230 @@ +/* + * PWM framework driver for Cirrus Logic EP93xx + * + * Copyright (c) 2009 Matthieu Crapet <mcrapet@gmail.com> + * Copyright (c) 2009, 2013 H Hartley Sweeten <hsweeten@visionengravers.com> + * + * EP9301/02 have only one channel: + * platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14) + * + * EP9307 has only one channel: + * platform device ep93xx-pwm.0 - PWMOUT + * + * EP9312/15 have two channels: + * platform device ep93xx-pwm.0 - PWMOUT + * platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/pwm.h> + +#include <asm/div64.h> + +#include <mach/platform.h> /* for ep93xx_pwm_{acquire,release}_gpio() */ + +#define EP93XX_PWMx_TERM_COUNT 0x00 +#define EP93XX_PWMx_DUTY_CYCLE 0x04 +#define EP93XX_PWMx_ENABLE 0x08 +#define EP93XX_PWMx_INVERT 0x0c + +struct ep93xx_pwm { + void __iomem *base; + struct clk *clk; + struct pwm_chip chip; +}; + +static inline struct ep93xx_pwm *to_ep93xx_pwm(struct pwm_chip *chip) +{ + return container_of(chip, struct ep93xx_pwm, chip); +} + +static int ep93xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct platform_device *pdev = to_platform_device(chip->dev); + + return ep93xx_pwm_acquire_gpio(pdev); +} + +static void ep93xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct platform_device *pdev = to_platform_device(chip->dev); + + ep93xx_pwm_release_gpio(pdev); +} + +static int ep93xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip); + void __iomem *base = ep93xx_pwm->base; + unsigned long long c; + unsigned long period_cycles; + unsigned long duty_cycles; + unsigned long term; + int ret = 0; + + /* + * The clock needs to be enabled to access the PWM registers. + * Configuration can be changed at any time. + */ + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + ret = clk_enable(ep93xx_pwm->clk); + if (ret) + return ret; + } + + c = clk_get_rate(ep93xx_pwm->clk); + c *= period_ns; + do_div(c, 1000000000); + period_cycles = c; + + c = period_cycles; + c *= duty_ns; + do_div(c, period_ns); + duty_cycles = c; + + if (period_cycles < 0x10000 && duty_cycles < 0x10000) { + term = readw(base + EP93XX_PWMx_TERM_COUNT); + + /* Order is important if PWM is running */ + if (period_cycles > term) { + writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT); + writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE); + } else { + writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE); + writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT); + } + } else { + ret = -EINVAL; + } + + if (!test_bit(PWMF_ENABLED, &pwm->flags)) + clk_disable(ep93xx_pwm->clk); + + return ret; +} + +static int ep93xx_pwm_polarity(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip); + int ret; + + /* + * The clock needs to be enabled to access the PWM registers. + * Polarity can only be changed when the PWM is disabled. + */ + ret = clk_enable(ep93xx_pwm->clk); + if (ret) + return ret; + + if (polarity == PWM_POLARITY_INVERSED) + writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_INVERT); + else + writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_INVERT); + + clk_disable(ep93xx_pwm->clk); + + return 0; +} + +static int ep93xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip); + int ret; + + ret = clk_enable(ep93xx_pwm->clk); + if (ret) + return ret; + + writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_ENABLE); + + return 0; +} + +static void ep93xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip); + + writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_ENABLE); + clk_disable(ep93xx_pwm->clk); +} + +static const struct pwm_ops ep93xx_pwm_ops = { + .request = ep93xx_pwm_request, + .free = ep93xx_pwm_free, + .config = ep93xx_pwm_config, + .set_polarity = ep93xx_pwm_polarity, + .enable = ep93xx_pwm_enable, + .disable = ep93xx_pwm_disable, + .owner = THIS_MODULE, +}; + +static int ep93xx_pwm_probe(struct platform_device *pdev) +{ + struct ep93xx_pwm *ep93xx_pwm; + struct resource *res; + int ret; + + ep93xx_pwm = devm_kzalloc(&pdev->dev, sizeof(*ep93xx_pwm), GFP_KERNEL); + if (!ep93xx_pwm) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ep93xx_pwm->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ep93xx_pwm->base)) + return PTR_ERR(ep93xx_pwm->base); + + ep93xx_pwm->clk = devm_clk_get(&pdev->dev, "pwm_clk"); + if (IS_ERR(ep93xx_pwm->clk)) + return PTR_ERR(ep93xx_pwm->clk); + + ep93xx_pwm->chip.dev = &pdev->dev; + ep93xx_pwm->chip.ops = &ep93xx_pwm_ops; + ep93xx_pwm->chip.base = -1; + ep93xx_pwm->chip.npwm = 1; + + ret = pwmchip_add(&ep93xx_pwm->chip); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, ep93xx_pwm); + return 0; +} + +static int ep93xx_pwm_remove(struct platform_device *pdev) +{ + struct ep93xx_pwm *ep93xx_pwm = platform_get_drvdata(pdev); + + return pwmchip_remove(&ep93xx_pwm->chip); +} + +static struct platform_driver ep93xx_pwm_driver = { + .driver = { + .name = "ep93xx-pwm", + }, + .probe = ep93xx_pwm_probe, + .remove = ep93xx_pwm_remove, +}; +module_platform_driver(ep93xx_pwm_driver); + +MODULE_DESCRIPTION("Cirrus Logic EP93xx PWM driver"); +MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>"); +MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>"); +MODULE_ALIAS("platform:ep93xx-pwm"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-fsl-ftm.c b/drivers/pwm/pwm-fsl-ftm.c new file mode 100644 index 000000000..f9dfc8b64 --- /dev/null +++ b/drivers/pwm/pwm-fsl-ftm.c @@ -0,0 +1,556 @@ +/* + * Freescale FlexTimer Module (FTM) PWM Driver + * + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/pwm.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define FTM_SC 0x00 +#define FTM_SC_CLK_MASK_SHIFT 3 +#define FTM_SC_CLK_MASK (3 << FTM_SC_CLK_MASK_SHIFT) +#define FTM_SC_CLK(c) (((c) + 1) << FTM_SC_CLK_MASK_SHIFT) +#define FTM_SC_PS_MASK 0x7 + +#define FTM_CNT 0x04 +#define FTM_MOD 0x08 + +#define FTM_CSC_BASE 0x0C +#define FTM_CSC_MSB BIT(5) +#define FTM_CSC_MSA BIT(4) +#define FTM_CSC_ELSB BIT(3) +#define FTM_CSC_ELSA BIT(2) +#define FTM_CSC(_channel) (FTM_CSC_BASE + ((_channel) * 8)) + +#define FTM_CV_BASE 0x10 +#define FTM_CV(_channel) (FTM_CV_BASE + ((_channel) * 8)) + +#define FTM_CNTIN 0x4C +#define FTM_STATUS 0x50 + +#define FTM_MODE 0x54 +#define FTM_MODE_FTMEN BIT(0) +#define FTM_MODE_INIT BIT(2) +#define FTM_MODE_PWMSYNC BIT(3) + +#define FTM_SYNC 0x58 +#define FTM_OUTINIT 0x5C +#define FTM_OUTMASK 0x60 +#define FTM_COMBINE 0x64 +#define FTM_DEADTIME 0x68 +#define FTM_EXTTRIG 0x6C +#define FTM_POL 0x70 +#define FTM_FMS 0x74 +#define FTM_FILTER 0x78 +#define FTM_FLTCTRL 0x7C +#define FTM_QDCTRL 0x80 +#define FTM_CONF 0x84 +#define FTM_FLTPOL 0x88 +#define FTM_SYNCONF 0x8C +#define FTM_INVCTRL 0x90 +#define FTM_SWOCTRL 0x94 +#define FTM_PWMLOAD 0x98 + +enum fsl_pwm_clk { + FSL_PWM_CLK_SYS, + FSL_PWM_CLK_FIX, + FSL_PWM_CLK_EXT, + FSL_PWM_CLK_CNTEN, + FSL_PWM_CLK_MAX +}; + +struct fsl_pwm_chip { + struct pwm_chip chip; + + struct mutex lock; + + unsigned int use_count; + unsigned int cnt_select; + unsigned int clk_ps; + + struct regmap *regmap; + + int period_ns; + + struct clk *clk[FSL_PWM_CLK_MAX]; +}; + +static inline struct fsl_pwm_chip *to_fsl_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct fsl_pwm_chip, chip); +} + +static int fsl_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct fsl_pwm_chip *fpc = to_fsl_chip(chip); + + return clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]); +} + +static void fsl_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct fsl_pwm_chip *fpc = to_fsl_chip(chip); + + clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]); +} + +static int fsl_pwm_calculate_default_ps(struct fsl_pwm_chip *fpc, + enum fsl_pwm_clk index) +{ + unsigned long sys_rate, cnt_rate; + unsigned long long ratio; + + sys_rate = clk_get_rate(fpc->clk[FSL_PWM_CLK_SYS]); + if (!sys_rate) + return -EINVAL; + + cnt_rate = clk_get_rate(fpc->clk[fpc->cnt_select]); + if (!cnt_rate) + return -EINVAL; + + switch (index) { + case FSL_PWM_CLK_SYS: + fpc->clk_ps = 1; + break; + case FSL_PWM_CLK_FIX: + ratio = 2 * cnt_rate - 1; + do_div(ratio, sys_rate); + fpc->clk_ps = ratio; + break; + case FSL_PWM_CLK_EXT: + ratio = 4 * cnt_rate - 1; + do_div(ratio, sys_rate); + fpc->clk_ps = ratio; + break; + default: + return -EINVAL; + } + + return 0; +} + +static unsigned long fsl_pwm_calculate_cycles(struct fsl_pwm_chip *fpc, + unsigned long period_ns) +{ + unsigned long long c, c0; + + c = clk_get_rate(fpc->clk[fpc->cnt_select]); + c = c * period_ns; + do_div(c, 1000000000UL); + + do { + c0 = c; + do_div(c0, (1 << fpc->clk_ps)); + if (c0 <= 0xFFFF) + return (unsigned long)c0; + } while (++fpc->clk_ps < 8); + + return 0; +} + +static unsigned long fsl_pwm_calculate_period_cycles(struct fsl_pwm_chip *fpc, + unsigned long period_ns, + enum fsl_pwm_clk index) +{ + int ret; + + ret = fsl_pwm_calculate_default_ps(fpc, index); + if (ret) { + dev_err(fpc->chip.dev, + "failed to calculate default prescaler: %d\n", + ret); + return 0; + } + + return fsl_pwm_calculate_cycles(fpc, period_ns); +} + +static unsigned long fsl_pwm_calculate_period(struct fsl_pwm_chip *fpc, + unsigned long period_ns) +{ + enum fsl_pwm_clk m0, m1; + unsigned long fix_rate, ext_rate, cycles; + + cycles = fsl_pwm_calculate_period_cycles(fpc, period_ns, + FSL_PWM_CLK_SYS); + if (cycles) { + fpc->cnt_select = FSL_PWM_CLK_SYS; + return cycles; + } + + fix_rate = clk_get_rate(fpc->clk[FSL_PWM_CLK_FIX]); + ext_rate = clk_get_rate(fpc->clk[FSL_PWM_CLK_EXT]); + + if (fix_rate > ext_rate) { + m0 = FSL_PWM_CLK_FIX; + m1 = FSL_PWM_CLK_EXT; + } else { + m0 = FSL_PWM_CLK_EXT; + m1 = FSL_PWM_CLK_FIX; + } + + cycles = fsl_pwm_calculate_period_cycles(fpc, period_ns, m0); + if (cycles) { + fpc->cnt_select = m0; + return cycles; + } + + fpc->cnt_select = m1; + + return fsl_pwm_calculate_period_cycles(fpc, period_ns, m1); +} + +static unsigned long fsl_pwm_calculate_duty(struct fsl_pwm_chip *fpc, + unsigned long period_ns, + unsigned long duty_ns) +{ + unsigned long long duty; + u32 val; + + regmap_read(fpc->regmap, FTM_MOD, &val); + duty = (unsigned long long)duty_ns * (val + 1); + do_div(duty, period_ns); + + return (unsigned long)duty; +} + +static int fsl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct fsl_pwm_chip *fpc = to_fsl_chip(chip); + u32 period, duty; + + mutex_lock(&fpc->lock); + + /* + * The Freescale FTM controller supports only a single period for + * all PWM channels, therefore incompatible changes need to be + * refused. + */ + if (fpc->period_ns && fpc->period_ns != period_ns) { + dev_err(fpc->chip.dev, + "conflicting period requested for PWM %u\n", + pwm->hwpwm); + mutex_unlock(&fpc->lock); + return -EBUSY; + } + + if (!fpc->period_ns && duty_ns) { + period = fsl_pwm_calculate_period(fpc, period_ns); + if (!period) { + dev_err(fpc->chip.dev, "failed to calculate period\n"); + mutex_unlock(&fpc->lock); + return -EINVAL; + } + + regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_PS_MASK, + fpc->clk_ps); + regmap_write(fpc->regmap, FTM_MOD, period - 1); + + fpc->period_ns = period_ns; + } + + mutex_unlock(&fpc->lock); + + duty = fsl_pwm_calculate_duty(fpc, period_ns, duty_ns); + + regmap_write(fpc->regmap, FTM_CSC(pwm->hwpwm), + FTM_CSC_MSB | FTM_CSC_ELSB); + regmap_write(fpc->regmap, FTM_CV(pwm->hwpwm), duty); + + return 0; +} + +static int fsl_pwm_set_polarity(struct pwm_chip *chip, + struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct fsl_pwm_chip *fpc = to_fsl_chip(chip); + u32 val; + + regmap_read(fpc->regmap, FTM_POL, &val); + + if (polarity == PWM_POLARITY_INVERSED) + val |= BIT(pwm->hwpwm); + else + val &= ~BIT(pwm->hwpwm); + + regmap_write(fpc->regmap, FTM_POL, val); + + return 0; +} + +static int fsl_counter_clock_enable(struct fsl_pwm_chip *fpc) +{ + int ret; + + if (fpc->use_count++ != 0) + return 0; + + /* select counter clock source */ + regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_CLK_MASK, + FTM_SC_CLK(fpc->cnt_select)); + + ret = clk_prepare_enable(fpc->clk[fpc->cnt_select]); + if (ret) + return ret; + + ret = clk_prepare_enable(fpc->clk[FSL_PWM_CLK_CNTEN]); + if (ret) { + clk_disable_unprepare(fpc->clk[fpc->cnt_select]); + return ret; + } + + return 0; +} + +static int fsl_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct fsl_pwm_chip *fpc = to_fsl_chip(chip); + int ret; + + mutex_lock(&fpc->lock); + regmap_update_bits(fpc->regmap, FTM_OUTMASK, BIT(pwm->hwpwm), 0); + + ret = fsl_counter_clock_enable(fpc); + mutex_unlock(&fpc->lock); + + return ret; +} + +static void fsl_counter_clock_disable(struct fsl_pwm_chip *fpc) +{ + /* + * already disabled, do nothing + */ + if (fpc->use_count == 0) + return; + + /* there are still users, so can't disable yet */ + if (--fpc->use_count > 0) + return; + + /* no users left, disable PWM counter clock */ + regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_CLK_MASK, 0); + + clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_CNTEN]); + clk_disable_unprepare(fpc->clk[fpc->cnt_select]); +} + +static void fsl_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct fsl_pwm_chip *fpc = to_fsl_chip(chip); + u32 val; + + mutex_lock(&fpc->lock); + regmap_update_bits(fpc->regmap, FTM_OUTMASK, BIT(pwm->hwpwm), + BIT(pwm->hwpwm)); + + fsl_counter_clock_disable(fpc); + + regmap_read(fpc->regmap, FTM_OUTMASK, &val); + if ((val & 0xFF) == 0xFF) + fpc->period_ns = 0; + + mutex_unlock(&fpc->lock); +} + +static const struct pwm_ops fsl_pwm_ops = { + .request = fsl_pwm_request, + .free = fsl_pwm_free, + .config = fsl_pwm_config, + .set_polarity = fsl_pwm_set_polarity, + .enable = fsl_pwm_enable, + .disable = fsl_pwm_disable, + .owner = THIS_MODULE, +}; + +static int fsl_pwm_init(struct fsl_pwm_chip *fpc) +{ + int ret; + + ret = clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]); + if (ret) + return ret; + + regmap_write(fpc->regmap, FTM_CNTIN, 0x00); + regmap_write(fpc->regmap, FTM_OUTINIT, 0x00); + regmap_write(fpc->regmap, FTM_OUTMASK, 0xFF); + + clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]); + + return 0; +} + +static bool fsl_pwm_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case FTM_CNT: + return true; + } + return false; +} + +static const struct regmap_config fsl_pwm_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + + .max_register = FTM_PWMLOAD, + .volatile_reg = fsl_pwm_volatile_reg, + .cache_type = REGCACHE_RBTREE, +}; + +static int fsl_pwm_probe(struct platform_device *pdev) +{ + struct fsl_pwm_chip *fpc; + struct resource *res; + void __iomem *base; + int ret; + + fpc = devm_kzalloc(&pdev->dev, sizeof(*fpc), GFP_KERNEL); + if (!fpc) + return -ENOMEM; + + mutex_init(&fpc->lock); + + fpc->chip.dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + fpc->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "ftm_sys", base, + &fsl_pwm_regmap_config); + if (IS_ERR(fpc->regmap)) { + dev_err(&pdev->dev, "regmap init failed\n"); + return PTR_ERR(fpc->regmap); + } + + fpc->clk[FSL_PWM_CLK_SYS] = devm_clk_get(&pdev->dev, "ftm_sys"); + if (IS_ERR(fpc->clk[FSL_PWM_CLK_SYS])) { + dev_err(&pdev->dev, "failed to get \"ftm_sys\" clock\n"); + return PTR_ERR(fpc->clk[FSL_PWM_CLK_SYS]); + } + + fpc->clk[FSL_PWM_CLK_FIX] = devm_clk_get(fpc->chip.dev, "ftm_fix"); + if (IS_ERR(fpc->clk[FSL_PWM_CLK_FIX])) + return PTR_ERR(fpc->clk[FSL_PWM_CLK_FIX]); + + fpc->clk[FSL_PWM_CLK_EXT] = devm_clk_get(fpc->chip.dev, "ftm_ext"); + if (IS_ERR(fpc->clk[FSL_PWM_CLK_EXT])) + return PTR_ERR(fpc->clk[FSL_PWM_CLK_EXT]); + + fpc->clk[FSL_PWM_CLK_CNTEN] = + devm_clk_get(fpc->chip.dev, "ftm_cnt_clk_en"); + if (IS_ERR(fpc->clk[FSL_PWM_CLK_CNTEN])) + return PTR_ERR(fpc->clk[FSL_PWM_CLK_CNTEN]); + + fpc->chip.ops = &fsl_pwm_ops; + fpc->chip.of_xlate = of_pwm_xlate_with_flags; + fpc->chip.of_pwm_n_cells = 3; + fpc->chip.base = -1; + fpc->chip.npwm = 8; + fpc->chip.can_sleep = true; + + ret = pwmchip_add(&fpc->chip); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, fpc); + + return fsl_pwm_init(fpc); +} + +static int fsl_pwm_remove(struct platform_device *pdev) +{ + struct fsl_pwm_chip *fpc = platform_get_drvdata(pdev); + + return pwmchip_remove(&fpc->chip); +} + +#ifdef CONFIG_PM_SLEEP +static int fsl_pwm_suspend(struct device *dev) +{ + struct fsl_pwm_chip *fpc = dev_get_drvdata(dev); + u32 val; + + regcache_cache_only(fpc->regmap, true); + regcache_mark_dirty(fpc->regmap); + + /* read from cache */ + regmap_read(fpc->regmap, FTM_OUTMASK, &val); + if ((val & 0xFF) != 0xFF) { + clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_CNTEN]); + clk_disable_unprepare(fpc->clk[fpc->cnt_select]); + clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]); + } + + return 0; +} + +static int fsl_pwm_resume(struct device *dev) +{ + struct fsl_pwm_chip *fpc = dev_get_drvdata(dev); + u32 val; + + /* read from cache */ + regmap_read(fpc->regmap, FTM_OUTMASK, &val); + if ((val & 0xFF) != 0xFF) { + clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]); + clk_prepare_enable(fpc->clk[fpc->cnt_select]); + clk_prepare_enable(fpc->clk[FSL_PWM_CLK_CNTEN]); + } + + /* restore all registers from cache */ + regcache_cache_only(fpc->regmap, false); + regcache_sync(fpc->regmap); + + return 0; +} +#endif + +static const struct dev_pm_ops fsl_pwm_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fsl_pwm_suspend, fsl_pwm_resume) +}; + +static const struct of_device_id fsl_pwm_dt_ids[] = { + { .compatible = "fsl,vf610-ftm-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, fsl_pwm_dt_ids); + +static struct platform_driver fsl_pwm_driver = { + .driver = { + .name = "fsl-ftm-pwm", + .of_match_table = fsl_pwm_dt_ids, + .pm = &fsl_pwm_pm_ops, + }, + .probe = fsl_pwm_probe, + .remove = fsl_pwm_remove, +}; +module_platform_driver(fsl_pwm_driver); + +MODULE_DESCRIPTION("Freescale FlexTimer Module PWM Driver"); +MODULE_AUTHOR("Xiubo Li <Li.Xiubo@freescale.com>"); +MODULE_ALIAS("platform:fsl-ftm-pwm"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c new file mode 100644 index 000000000..8a029f9bc --- /dev/null +++ b/drivers/pwm/pwm-img.c @@ -0,0 +1,301 @@ +/* + * Imagination Technologies Pulse Width Modulator driver + * + * Copyright (c) 2014-2015, Imagination Technologies + * + * Based on drivers/pwm/pwm-tegra.c, Copyright (c) 2010, NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +/* PWM registers */ +#define PWM_CTRL_CFG 0x0000 +#define PWM_CTRL_CFG_NO_SUB_DIV 0 +#define PWM_CTRL_CFG_SUB_DIV0 1 +#define PWM_CTRL_CFG_SUB_DIV1 2 +#define PWM_CTRL_CFG_SUB_DIV0_DIV1 3 +#define PWM_CTRL_CFG_DIV_SHIFT(ch) ((ch) * 2 + 4) +#define PWM_CTRL_CFG_DIV_MASK 0x3 + +#define PWM_CH_CFG(ch) (0x4 + (ch) * 4) +#define PWM_CH_CFG_TMBASE_SHIFT 0 +#define PWM_CH_CFG_DUTY_SHIFT 16 + +#define PERIP_PWM_PDM_CONTROL 0x0140 +#define PERIP_PWM_PDM_CONTROL_CH_MASK 0x1 +#define PERIP_PWM_PDM_CONTROL_CH_SHIFT(ch) ((ch) * 4) + +/* + * PWM period is specified with a timebase register, + * in number of step periods. The PWM duty cycle is also + * specified in step periods, in the [0, $timebase] range. + * In other words, the timebase imposes the duty cycle + * resolution. Therefore, let's constraint the timebase to + * a minimum value to allow a sane range of duty cycle values. + * Imposing a minimum timebase, will impose a maximum PWM frequency. + * + * The value chosen is completely arbitrary. + */ +#define MIN_TMBASE_STEPS 16 + +struct img_pwm_soc_data { + u32 max_timebase; +}; + +struct img_pwm_chip { + struct device *dev; + struct pwm_chip chip; + struct clk *pwm_clk; + struct clk *sys_clk; + void __iomem *base; + struct regmap *periph_regs; + int max_period_ns; + int min_period_ns; + const struct img_pwm_soc_data *data; +}; + +static inline struct img_pwm_chip *to_img_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct img_pwm_chip, chip); +} + +static inline void img_pwm_writel(struct img_pwm_chip *chip, + u32 reg, u32 val) +{ + writel(val, chip->base + reg); +} + +static inline u32 img_pwm_readl(struct img_pwm_chip *chip, + u32 reg) +{ + return readl(chip->base + reg); +} + +static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + u32 val, div, duty, timebase; + unsigned long mul, output_clk_hz, input_clk_hz; + struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); + unsigned int max_timebase = pwm_chip->data->max_timebase; + + if (period_ns < pwm_chip->min_period_ns || + period_ns > pwm_chip->max_period_ns) { + dev_err(chip->dev, "configured period not in range\n"); + return -ERANGE; + } + + input_clk_hz = clk_get_rate(pwm_chip->pwm_clk); + output_clk_hz = DIV_ROUND_UP(NSEC_PER_SEC, period_ns); + + mul = DIV_ROUND_UP(input_clk_hz, output_clk_hz); + if (mul <= max_timebase) { + div = PWM_CTRL_CFG_NO_SUB_DIV; + timebase = DIV_ROUND_UP(mul, 1); + } else if (mul <= max_timebase * 8) { + div = PWM_CTRL_CFG_SUB_DIV0; + timebase = DIV_ROUND_UP(mul, 8); + } else if (mul <= max_timebase * 64) { + div = PWM_CTRL_CFG_SUB_DIV1; + timebase = DIV_ROUND_UP(mul, 64); + } else if (mul <= max_timebase * 512) { + div = PWM_CTRL_CFG_SUB_DIV0_DIV1; + timebase = DIV_ROUND_UP(mul, 512); + } else if (mul > max_timebase * 512) { + dev_err(chip->dev, + "failed to configure timebase steps/divider value\n"); + return -EINVAL; + } + + duty = DIV_ROUND_UP(timebase * duty_ns, period_ns); + + val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); + val &= ~(PWM_CTRL_CFG_DIV_MASK << PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm)); + val |= (div & PWM_CTRL_CFG_DIV_MASK) << + PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm); + img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); + + val = (duty << PWM_CH_CFG_DUTY_SHIFT) | + (timebase << PWM_CH_CFG_TMBASE_SHIFT); + img_pwm_writel(pwm_chip, PWM_CH_CFG(pwm->hwpwm), val); + + return 0; +} + +static int img_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + u32 val; + struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); + + val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); + val |= BIT(pwm->hwpwm); + img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); + + regmap_update_bits(pwm_chip->periph_regs, PERIP_PWM_PDM_CONTROL, + PERIP_PWM_PDM_CONTROL_CH_MASK << + PERIP_PWM_PDM_CONTROL_CH_SHIFT(pwm->hwpwm), 0); + + return 0; +} + +static void img_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + u32 val; + struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); + + val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); + val &= ~BIT(pwm->hwpwm); + img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); +} + +static const struct pwm_ops img_pwm_ops = { + .config = img_pwm_config, + .enable = img_pwm_enable, + .disable = img_pwm_disable, + .owner = THIS_MODULE, +}; + +static const struct img_pwm_soc_data pistachio_pwm = { + .max_timebase = 255, +}; + +static const struct of_device_id img_pwm_of_match[] = { + { + .compatible = "img,pistachio-pwm", + .data = &pistachio_pwm, + }, + { } +}; +MODULE_DEVICE_TABLE(of, img_pwm_of_match); + +static int img_pwm_probe(struct platform_device *pdev) +{ + int ret; + u64 val; + unsigned long clk_rate; + struct resource *res; + struct img_pwm_chip *pwm; + const struct of_device_id *of_dev_id; + + pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); + if (!pwm) + return -ENOMEM; + + pwm->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pwm->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pwm->base)) + return PTR_ERR(pwm->base); + + of_dev_id = of_match_device(img_pwm_of_match, &pdev->dev); + if (!of_dev_id) + return -ENODEV; + pwm->data = of_dev_id->data; + + pwm->periph_regs = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "img,cr-periph"); + if (IS_ERR(pwm->periph_regs)) + return PTR_ERR(pwm->periph_regs); + + pwm->sys_clk = devm_clk_get(&pdev->dev, "sys"); + if (IS_ERR(pwm->sys_clk)) { + dev_err(&pdev->dev, "failed to get system clock\n"); + return PTR_ERR(pwm->sys_clk); + } + + pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm"); + if (IS_ERR(pwm->pwm_clk)) { + dev_err(&pdev->dev, "failed to get pwm clock\n"); + return PTR_ERR(pwm->pwm_clk); + } + + ret = clk_prepare_enable(pwm->sys_clk); + if (ret < 0) { + dev_err(&pdev->dev, "could not prepare or enable sys clock\n"); + return ret; + } + + ret = clk_prepare_enable(pwm->pwm_clk); + if (ret < 0) { + dev_err(&pdev->dev, "could not prepare or enable pwm clock\n"); + goto disable_sysclk; + } + + clk_rate = clk_get_rate(pwm->pwm_clk); + + /* The maximum input clock divider is 512 */ + val = (u64)NSEC_PER_SEC * 512 * pwm->data->max_timebase; + do_div(val, clk_rate); + pwm->max_period_ns = val; + + val = (u64)NSEC_PER_SEC * MIN_TMBASE_STEPS; + do_div(val, clk_rate); + pwm->min_period_ns = val; + + pwm->chip.dev = &pdev->dev; + pwm->chip.ops = &img_pwm_ops; + pwm->chip.base = -1; + pwm->chip.npwm = 4; + + ret = pwmchip_add(&pwm->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret); + goto disable_pwmclk; + } + + platform_set_drvdata(pdev, pwm); + return 0; + +disable_pwmclk: + clk_disable_unprepare(pwm->pwm_clk); +disable_sysclk: + clk_disable_unprepare(pwm->sys_clk); + return ret; +} + +static int img_pwm_remove(struct platform_device *pdev) +{ + struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev); + u32 val; + unsigned int i; + + for (i = 0; i < pwm_chip->chip.npwm; i++) { + val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); + val &= ~BIT(i); + img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); + } + + clk_disable_unprepare(pwm_chip->pwm_clk); + clk_disable_unprepare(pwm_chip->sys_clk); + + return pwmchip_remove(&pwm_chip->chip); +} + +static struct platform_driver img_pwm_driver = { + .driver = { + .name = "img-pwm", + .of_match_table = img_pwm_of_match, + }, + .probe = img_pwm_probe, + .remove = img_pwm_remove, +}; +module_platform_driver(img_pwm_driver); + +MODULE_AUTHOR("Sai Masarapu <Sai.Masarapu@imgtec.com>"); +MODULE_DESCRIPTION("Imagination Technologies PWM DAC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c new file mode 100644 index 000000000..66d6f0c5c --- /dev/null +++ b/drivers/pwm/pwm-imx.c @@ -0,0 +1,348 @@ +/* + * simple driver for PWM (Pulse Width Modulator) controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/pwm.h> +#include <linux/of.h> +#include <linux/of_device.h> + +/* i.MX1 and i.MX21 share the same PWM function block: */ + +#define MX1_PWMC 0x00 /* PWM Control Register */ +#define MX1_PWMS 0x04 /* PWM Sample Register */ +#define MX1_PWMP 0x08 /* PWM Period Register */ + +#define MX1_PWMC_EN (1 << 4) + +/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ + +#define MX3_PWMCR 0x00 /* PWM Control Register */ +#define MX3_PWMSR 0x04 /* PWM Status Register */ +#define MX3_PWMSAR 0x0C /* PWM Sample Register */ +#define MX3_PWMPR 0x10 /* PWM Period Register */ +#define MX3_PWMCR_PRESCALER(x) ((((x) - 1) & 0xFFF) << 4) +#define MX3_PWMCR_DOZEEN (1 << 24) +#define MX3_PWMCR_WAITEN (1 << 23) +#define MX3_PWMCR_DBGEN (1 << 22) +#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) +#define MX3_PWMCR_CLKSRC_IPG (1 << 16) +#define MX3_PWMCR_SWR (1 << 3) +#define MX3_PWMCR_EN (1 << 0) +#define MX3_PWMSR_FIFOAV_4WORDS 0x4 +#define MX3_PWMSR_FIFOAV_MASK 0x7 + +#define MX3_PWM_SWR_LOOP 5 + +struct imx_chip { + struct clk *clk_per; + struct clk *clk_ipg; + + void __iomem *mmio_base; + + struct pwm_chip chip; + + int (*config)(struct pwm_chip *chip, + struct pwm_device *pwm, int duty_ns, int period_ns); + void (*set_enable)(struct pwm_chip *chip, bool enable); +}; + +#define to_imx_chip(chip) container_of(chip, struct imx_chip, chip) + +static int imx_pwm_config_v1(struct pwm_chip *chip, + struct pwm_device *pwm, int duty_ns, int period_ns) +{ + struct imx_chip *imx = to_imx_chip(chip); + + /* + * The PWM subsystem allows for exact frequencies. However, + * I cannot connect a scope on my device to the PWM line and + * thus cannot provide the program the PWM controller + * exactly. Instead, I'm relying on the fact that the + * Bootloader (u-boot or WinCE+haret) has programmed the PWM + * function group already. So I'll just modify the PWM sample + * register to follow the ratio of duty_ns vs. period_ns + * accordingly. + * + * This is good enough for programming the brightness of + * the LCD backlight. + * + * The real implementation would divide PERCLK[0] first by + * both the prescaler (/1 .. /128) and then by CLKSEL + * (/2 .. /16). + */ + u32 max = readl(imx->mmio_base + MX1_PWMP); + u32 p = max * duty_ns / period_ns; + writel(max - p, imx->mmio_base + MX1_PWMS); + + return 0; +} + +static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable) +{ + struct imx_chip *imx = to_imx_chip(chip); + u32 val; + + val = readl(imx->mmio_base + MX1_PWMC); + + if (enable) + val |= MX1_PWMC_EN; + else + val &= ~MX1_PWMC_EN; + + writel(val, imx->mmio_base + MX1_PWMC); +} + +static int imx_pwm_config_v2(struct pwm_chip *chip, + struct pwm_device *pwm, int duty_ns, int period_ns) +{ + struct imx_chip *imx = to_imx_chip(chip); + struct device *dev = chip->dev; + unsigned long long c; + unsigned long period_cycles, duty_cycles, prescale; + unsigned int period_ms; + bool enable = test_bit(PWMF_ENABLED, &pwm->flags); + int wait_count = 0, fifoav; + u32 cr, sr; + + /* + * i.MX PWMv2 has a 4-word sample FIFO. + * In order to avoid FIFO overflow issue, we do software reset + * to clear all sample FIFO if the controller is disabled or + * wait for a full PWM cycle to get a relinquished FIFO slot + * when the controller is enabled and the FIFO is fully loaded. + */ + if (enable) { + sr = readl(imx->mmio_base + MX3_PWMSR); + fifoav = sr & MX3_PWMSR_FIFOAV_MASK; + if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) { + period_ms = DIV_ROUND_UP(pwm->period, NSEC_PER_MSEC); + msleep(period_ms); + + sr = readl(imx->mmio_base + MX3_PWMSR); + if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK)) + dev_warn(dev, "there is no free FIFO slot\n"); + } + } else { + writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR); + do { + usleep_range(200, 1000); + cr = readl(imx->mmio_base + MX3_PWMCR); + } while ((cr & MX3_PWMCR_SWR) && + (wait_count++ < MX3_PWM_SWR_LOOP)); + + if (cr & MX3_PWMCR_SWR) + dev_warn(dev, "software reset timeout\n"); + } + + c = clk_get_rate(imx->clk_per); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + prescale = period_cycles / 0x10000 + 1; + + period_cycles /= prescale; + c = (unsigned long long)period_cycles * duty_ns; + do_div(c, period_ns); + duty_cycles = c; + + /* + * according to imx pwm RM, the real period value should be + * PERIOD value in PWMPR plus 2. + */ + if (period_cycles > 2) + period_cycles -= 2; + else + period_cycles = 0; + + writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); + writel(period_cycles, imx->mmio_base + MX3_PWMPR); + + cr = MX3_PWMCR_PRESCALER(prescale) | + MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | + MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH; + + if (enable) + cr |= MX3_PWMCR_EN; + + writel(cr, imx->mmio_base + MX3_PWMCR); + + return 0; +} + +static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable) +{ + struct imx_chip *imx = to_imx_chip(chip); + u32 val; + + val = readl(imx->mmio_base + MX3_PWMCR); + + if (enable) + val |= MX3_PWMCR_EN; + else + val &= ~MX3_PWMCR_EN; + + writel(val, imx->mmio_base + MX3_PWMCR); +} + +static int imx_pwm_config(struct pwm_chip *chip, + struct pwm_device *pwm, int duty_ns, int period_ns) +{ + struct imx_chip *imx = to_imx_chip(chip); + int ret; + + ret = clk_prepare_enable(imx->clk_ipg); + if (ret) + return ret; + + ret = imx->config(chip, pwm, duty_ns, period_ns); + + clk_disable_unprepare(imx->clk_ipg); + + return ret; +} + +static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct imx_chip *imx = to_imx_chip(chip); + int ret; + + ret = clk_prepare_enable(imx->clk_per); + if (ret) + return ret; + + imx->set_enable(chip, true); + + return 0; +} + +static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct imx_chip *imx = to_imx_chip(chip); + + imx->set_enable(chip, false); + + clk_disable_unprepare(imx->clk_per); +} + +static struct pwm_ops imx_pwm_ops = { + .enable = imx_pwm_enable, + .disable = imx_pwm_disable, + .config = imx_pwm_config, + .owner = THIS_MODULE, +}; + +struct imx_pwm_data { + int (*config)(struct pwm_chip *chip, + struct pwm_device *pwm, int duty_ns, int period_ns); + void (*set_enable)(struct pwm_chip *chip, bool enable); +}; + +static struct imx_pwm_data imx_pwm_data_v1 = { + .config = imx_pwm_config_v1, + .set_enable = imx_pwm_set_enable_v1, +}; + +static struct imx_pwm_data imx_pwm_data_v2 = { + .config = imx_pwm_config_v2, + .set_enable = imx_pwm_set_enable_v2, +}; + +static const struct of_device_id imx_pwm_dt_ids[] = { + { .compatible = "fsl,imx1-pwm", .data = &imx_pwm_data_v1, }, + { .compatible = "fsl,imx27-pwm", .data = &imx_pwm_data_v2, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_pwm_dt_ids); + +static int imx_pwm_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(imx_pwm_dt_ids, &pdev->dev); + const struct imx_pwm_data *data; + struct imx_chip *imx; + struct resource *r; + int ret = 0; + + if (!of_id) + return -ENODEV; + + imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL); + if (imx == NULL) + return -ENOMEM; + + imx->clk_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(imx->clk_per)) { + dev_err(&pdev->dev, "getting per clock failed with %ld\n", + PTR_ERR(imx->clk_per)); + return PTR_ERR(imx->clk_per); + } + + imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(imx->clk_ipg)) { + dev_err(&pdev->dev, "getting ipg clock failed with %ld\n", + PTR_ERR(imx->clk_ipg)); + return PTR_ERR(imx->clk_ipg); + } + + imx->chip.ops = &imx_pwm_ops; + imx->chip.dev = &pdev->dev; + imx->chip.base = -1; + imx->chip.npwm = 1; + imx->chip.can_sleep = true; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + imx->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(imx->mmio_base)) + return PTR_ERR(imx->mmio_base); + + data = of_id->data; + imx->config = data->config; + imx->set_enable = data->set_enable; + + ret = pwmchip_add(&imx->chip); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, imx); + return 0; +} + +static int imx_pwm_remove(struct platform_device *pdev) +{ + struct imx_chip *imx; + + imx = platform_get_drvdata(pdev); + if (imx == NULL) + return -ENODEV; + + return pwmchip_remove(&imx->chip); +} + +static struct platform_driver imx_pwm_driver = { + .driver = { + .name = "imx-pwm", + .of_match_table = imx_pwm_dt_ids, + }, + .probe = imx_pwm_probe, + .remove = imx_pwm_remove, +}; + +module_platform_driver(imx_pwm_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c new file mode 100644 index 000000000..76d131502 --- /dev/null +++ b/drivers/pwm/pwm-jz4740.c @@ -0,0 +1,206 @@ +/* + * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> + * JZ4740 platform PWM support + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> + +#include <asm/mach-jz4740/gpio.h> +#include <asm/mach-jz4740/timer.h> + +#define NUM_PWM 8 + +static const unsigned int jz4740_pwm_gpio_list[NUM_PWM] = { + JZ_GPIO_PWM0, + JZ_GPIO_PWM1, + JZ_GPIO_PWM2, + JZ_GPIO_PWM3, + JZ_GPIO_PWM4, + JZ_GPIO_PWM5, + JZ_GPIO_PWM6, + JZ_GPIO_PWM7, +}; + +struct jz4740_pwm_chip { + struct pwm_chip chip; + struct clk *clk; +}; + +static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip) +{ + return container_of(chip, struct jz4740_pwm_chip, chip); +} + +static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm]; + int ret; + + /* + * Timers 0 and 1 are used for system tasks, so they are unavailable + * for use as PWMs. + */ + if (pwm->hwpwm < 2) + return -EBUSY; + + ret = gpio_request(gpio, pwm->label); + if (ret) { + dev_err(chip->dev, "Failed to request GPIO#%u for PWM: %d\n", + gpio, ret); + return ret; + } + + jz_gpio_set_function(gpio, JZ_GPIO_FUNC_PWM); + + jz4740_timer_start(pwm->hwpwm); + + return 0; +} + +static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm]; + + jz4740_timer_set_ctrl(pwm->hwpwm, 0); + + jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE); + gpio_free(gpio); + + jz4740_timer_stop(pwm->hwpwm); +} + +static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm); + + ctrl |= JZ_TIMER_CTRL_PWM_ENABLE; + jz4740_timer_set_ctrl(pwm->hwpwm, ctrl); + jz4740_timer_enable(pwm->hwpwm); + + return 0; +} + +static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm); + + ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE; + jz4740_timer_disable(pwm->hwpwm); + jz4740_timer_set_ctrl(pwm->hwpwm, ctrl); +} + +static int jz4740_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip); + unsigned long long tmp; + unsigned long period, duty; + unsigned int prescaler = 0; + uint16_t ctrl; + bool is_enabled; + + tmp = (unsigned long long)clk_get_rate(jz4740->clk) * period_ns; + do_div(tmp, 1000000000); + period = tmp; + + while (period > 0xffff && prescaler < 6) { + period >>= 2; + ++prescaler; + } + + if (prescaler == 6) + return -EINVAL; + + tmp = (unsigned long long)period * duty_ns; + do_div(tmp, period_ns); + duty = period - tmp; + + if (duty >= period) + duty = period - 1; + + is_enabled = jz4740_timer_is_enabled(pwm->hwpwm); + if (is_enabled) + jz4740_pwm_disable(chip, pwm); + + jz4740_timer_set_count(pwm->hwpwm, 0); + jz4740_timer_set_duty(pwm->hwpwm, duty); + jz4740_timer_set_period(pwm->hwpwm, period); + + ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT | + JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN; + + jz4740_timer_set_ctrl(pwm->hwpwm, ctrl); + + if (is_enabled) + jz4740_pwm_enable(chip, pwm); + + return 0; +} + +static const struct pwm_ops jz4740_pwm_ops = { + .request = jz4740_pwm_request, + .free = jz4740_pwm_free, + .config = jz4740_pwm_config, + .enable = jz4740_pwm_enable, + .disable = jz4740_pwm_disable, + .owner = THIS_MODULE, +}; + +static int jz4740_pwm_probe(struct platform_device *pdev) +{ + struct jz4740_pwm_chip *jz4740; + + jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL); + if (!jz4740) + return -ENOMEM; + + jz4740->clk = devm_clk_get(&pdev->dev, "ext"); + if (IS_ERR(jz4740->clk)) + return PTR_ERR(jz4740->clk); + + jz4740->chip.dev = &pdev->dev; + jz4740->chip.ops = &jz4740_pwm_ops; + jz4740->chip.npwm = NUM_PWM; + jz4740->chip.base = -1; + + platform_set_drvdata(pdev, jz4740); + + return pwmchip_add(&jz4740->chip); +} + +static int jz4740_pwm_remove(struct platform_device *pdev) +{ + struct jz4740_pwm_chip *jz4740 = platform_get_drvdata(pdev); + + return pwmchip_remove(&jz4740->chip); +} + +static struct platform_driver jz4740_pwm_driver = { + .driver = { + .name = "jz4740-pwm", + }, + .probe = jz4740_pwm_probe, + .remove = jz4740_pwm_remove, +}; +module_platform_driver(jz4740_pwm_driver); + +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("Ingenic JZ4740 PWM driver"); +MODULE_ALIAS("platform:jz4740-pwm"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c new file mode 100644 index 000000000..872ea76a4 --- /dev/null +++ b/drivers/pwm/pwm-lp3943.c @@ -0,0 +1,316 @@ +/* + * TI/National Semiconductor LP3943 PWM driver + * + * Copyright 2013 Texas Instruments + * + * Author: Milo Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/mfd/lp3943.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> + +#define LP3943_MAX_DUTY 255 +#define LP3943_MIN_PERIOD 6250 +#define LP3943_MAX_PERIOD 1600000 + +struct lp3943_pwm { + struct pwm_chip chip; + struct lp3943 *lp3943; + struct lp3943_platform_data *pdata; +}; + +static inline struct lp3943_pwm *to_lp3943_pwm(struct pwm_chip *_chip) +{ + return container_of(_chip, struct lp3943_pwm, chip); +} + +static struct lp3943_pwm_map * +lp3943_pwm_request_map(struct lp3943_pwm *lp3943_pwm, int hwpwm) +{ + struct lp3943_platform_data *pdata = lp3943_pwm->pdata; + struct lp3943 *lp3943 = lp3943_pwm->lp3943; + struct lp3943_pwm_map *pwm_map; + int i, offset; + + pwm_map = kzalloc(sizeof(*pwm_map), GFP_KERNEL); + if (!pwm_map) + return ERR_PTR(-ENOMEM); + + pwm_map->output = pdata->pwms[hwpwm]->output; + pwm_map->num_outputs = pdata->pwms[hwpwm]->num_outputs; + + for (i = 0; i < pwm_map->num_outputs; i++) { + offset = pwm_map->output[i]; + + /* Return an error if the pin is already assigned */ + if (test_and_set_bit(offset, &lp3943->pin_used)) { + kfree(pwm_map); + return ERR_PTR(-EBUSY); + } + } + + return pwm_map; +} + +static int lp3943_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); + struct lp3943_pwm_map *pwm_map; + + pwm_map = lp3943_pwm_request_map(lp3943_pwm, pwm->hwpwm); + if (IS_ERR(pwm_map)) + return PTR_ERR(pwm_map); + + return pwm_set_chip_data(pwm, pwm_map); +} + +static void lp3943_pwm_free_map(struct lp3943_pwm *lp3943_pwm, + struct lp3943_pwm_map *pwm_map) +{ + struct lp3943 *lp3943 = lp3943_pwm->lp3943; + int i, offset; + + for (i = 0; i < pwm_map->num_outputs; i++) { + offset = pwm_map->output[i]; + clear_bit(offset, &lp3943->pin_used); + } + + kfree(pwm_map); +} + +static void lp3943_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); + struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm); + + lp3943_pwm_free_map(lp3943_pwm, pwm_map); +} + +static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); + struct lp3943 *lp3943 = lp3943_pwm->lp3943; + u8 val, reg_duty, reg_prescale; + int err; + + /* + * How to configure the LP3943 PWMs + * + * 1) Period = 6250 ~ 1600000 + * 2) Prescale = period / 6250 -1 + * 3) Duty = input duty + * + * Prescale and duty are register values + */ + + if (pwm->hwpwm == 0) { + reg_prescale = LP3943_REG_PRESCALE0; + reg_duty = LP3943_REG_PWM0; + } else { + reg_prescale = LP3943_REG_PRESCALE1; + reg_duty = LP3943_REG_PWM1; + } + + period_ns = clamp(period_ns, LP3943_MIN_PERIOD, LP3943_MAX_PERIOD); + val = (u8)(period_ns / LP3943_MIN_PERIOD - 1); + + err = lp3943_write_byte(lp3943, reg_prescale, val); + if (err) + return err; + + val = (u8)(duty_ns * LP3943_MAX_DUTY / period_ns); + + return lp3943_write_byte(lp3943, reg_duty, val); +} + +static int lp3943_pwm_set_mode(struct lp3943_pwm *lp3943_pwm, + struct lp3943_pwm_map *pwm_map, + u8 val) +{ + struct lp3943 *lp3943 = lp3943_pwm->lp3943; + const struct lp3943_reg_cfg *mux = lp3943->mux_cfg; + int i, index, err; + + for (i = 0; i < pwm_map->num_outputs; i++) { + index = pwm_map->output[i]; + err = lp3943_update_bits(lp3943, mux[index].reg, + mux[index].mask, + val << mux[index].shift); + if (err) + return err; + } + + return 0; +} + +static int lp3943_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); + struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm); + u8 val; + + if (pwm->hwpwm == 0) + val = LP3943_DIM_PWM0; + else + val = LP3943_DIM_PWM1; + + /* + * Each PWM generator is set to control any of outputs of LP3943. + * To enable/disable the PWM, these output pins should be configured. + */ + + return lp3943_pwm_set_mode(lp3943_pwm, pwm_map, val); +} + +static void lp3943_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip); + struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm); + + /* + * LP3943 outputs are open-drain, so the pin should be configured + * when the PWM is disabled. + */ + + lp3943_pwm_set_mode(lp3943_pwm, pwm_map, LP3943_GPIO_OUT_HIGH); +} + +static const struct pwm_ops lp3943_pwm_ops = { + .request = lp3943_pwm_request, + .free = lp3943_pwm_free, + .config = lp3943_pwm_config, + .enable = lp3943_pwm_enable, + .disable = lp3943_pwm_disable, + .owner = THIS_MODULE, +}; + +static int lp3943_pwm_parse_dt(struct device *dev, + struct lp3943_pwm *lp3943_pwm) +{ + static const char * const name[] = { "ti,pwm0", "ti,pwm1", }; + struct device_node *node = dev->of_node; + struct lp3943_platform_data *pdata; + struct lp3943_pwm_map *pwm_map; + enum lp3943_pwm_output *output; + int i, err, proplen, count = 0; + u32 num_outputs; + + if (!node) + return -EINVAL; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + /* + * Read the output map configuration from the device tree. + * Each of the two PWM generators can drive zero or more outputs. + */ + + for (i = 0; i < LP3943_NUM_PWMS; i++) { + if (!of_get_property(node, name[i], &proplen)) + continue; + + num_outputs = proplen / sizeof(u32); + if (num_outputs == 0) + continue; + + output = devm_kzalloc(dev, sizeof(*output) * num_outputs, + GFP_KERNEL); + if (!output) + return -ENOMEM; + + err = of_property_read_u32_array(node, name[i], output, + num_outputs); + if (err) + return err; + + pwm_map = devm_kzalloc(dev, sizeof(*pwm_map), GFP_KERNEL); + if (!pwm_map) + return -ENOMEM; + + pwm_map->output = output; + pwm_map->num_outputs = num_outputs; + pdata->pwms[i] = pwm_map; + + count++; + } + + if (count == 0) + return -ENODATA; + + lp3943_pwm->pdata = pdata; + return 0; +} + +static int lp3943_pwm_probe(struct platform_device *pdev) +{ + struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent); + struct lp3943_pwm *lp3943_pwm; + int ret; + + lp3943_pwm = devm_kzalloc(&pdev->dev, sizeof(*lp3943_pwm), GFP_KERNEL); + if (!lp3943_pwm) + return -ENOMEM; + + lp3943_pwm->pdata = lp3943->pdata; + if (!lp3943_pwm->pdata) { + if (IS_ENABLED(CONFIG_OF)) + ret = lp3943_pwm_parse_dt(&pdev->dev, lp3943_pwm); + else + ret = -ENODEV; + + if (ret) + return ret; + } + + lp3943_pwm->lp3943 = lp3943; + lp3943_pwm->chip.dev = &pdev->dev; + lp3943_pwm->chip.ops = &lp3943_pwm_ops; + lp3943_pwm->chip.npwm = LP3943_NUM_PWMS; + lp3943_pwm->chip.can_sleep = true; + + platform_set_drvdata(pdev, lp3943_pwm); + + return pwmchip_add(&lp3943_pwm->chip); +} + +static int lp3943_pwm_remove(struct platform_device *pdev) +{ + struct lp3943_pwm *lp3943_pwm = platform_get_drvdata(pdev); + + return pwmchip_remove(&lp3943_pwm->chip); +} + +#ifdef CONFIG_OF +static const struct of_device_id lp3943_pwm_of_match[] = { + { .compatible = "ti,lp3943-pwm", }, + { } +}; +MODULE_DEVICE_TABLE(of, lp3943_pwm_of_match); +#endif + +static struct platform_driver lp3943_pwm_driver = { + .probe = lp3943_pwm_probe, + .remove = lp3943_pwm_remove, + .driver = { + .name = "lp3943-pwm", + .of_match_table = of_match_ptr(lp3943_pwm_of_match), + }, +}; +module_platform_driver(lp3943_pwm_driver); + +MODULE_DESCRIPTION("LP3943 PWM driver"); +MODULE_ALIAS("platform:lp3943-pwm"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-lpc32xx.c b/drivers/pwm/pwm-lpc32xx.c new file mode 100644 index 000000000..9fde60ce8 --- /dev/null +++ b/drivers/pwm/pwm-lpc32xx.c @@ -0,0 +1,181 @@ +/* + * Copyright 2012 Alexandre Pereira da Silva <aletes.xgr@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> + +struct lpc32xx_pwm_chip { + struct pwm_chip chip; + struct clk *clk; + void __iomem *base; +}; + +#define PWM_ENABLE (1 << 31) +#define PWM_RELOADV(x) (((x) & 0xFF) << 8) +#define PWM_DUTY(x) ((x) & 0xFF) + +#define to_lpc32xx_pwm_chip(_chip) \ + container_of(_chip, struct lpc32xx_pwm_chip, chip) + +static int lpc32xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip); + unsigned long long c; + int period_cycles, duty_cycles; + u32 val; + + c = clk_get_rate(lpc32xx->clk) / 256; + c = c * period_ns; + do_div(c, NSEC_PER_SEC); + + /* Handle high and low extremes */ + if (c == 0) + c = 1; + if (c > 255) + c = 0; /* 0 set division by 256 */ + period_cycles = c; + + /* The duty-cycle value is as follows: + * + * DUTY-CYCLE HIGH LEVEL + * 1 99.9% + * 25 90.0% + * 128 50.0% + * 220 10.0% + * 255 0.1% + * 0 0.0% + * + * In other words, the register value is duty-cycle % 256 with + * duty-cycle in the range 1-256. + */ + c = 256 * duty_ns; + do_div(c, period_ns); + if (c > 255) + c = 255; + duty_cycles = 256 - c; + + val = readl(lpc32xx->base + (pwm->hwpwm << 2)); + val &= ~0xFFFF; + val |= PWM_RELOADV(period_cycles) | PWM_DUTY(duty_cycles); + writel(val, lpc32xx->base + (pwm->hwpwm << 2)); + + return 0; +} + +static int lpc32xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip); + u32 val; + int ret; + + ret = clk_enable(lpc32xx->clk); + if (ret) + return ret; + + val = readl(lpc32xx->base + (pwm->hwpwm << 2)); + val |= PWM_ENABLE; + writel(val, lpc32xx->base + (pwm->hwpwm << 2)); + + return 0; +} + +static void lpc32xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip); + u32 val; + + val = readl(lpc32xx->base + (pwm->hwpwm << 2)); + val &= ~PWM_ENABLE; + writel(val, lpc32xx->base + (pwm->hwpwm << 2)); + + clk_disable(lpc32xx->clk); +} + +static const struct pwm_ops lpc32xx_pwm_ops = { + .config = lpc32xx_pwm_config, + .enable = lpc32xx_pwm_enable, + .disable = lpc32xx_pwm_disable, + .owner = THIS_MODULE, +}; + +static int lpc32xx_pwm_probe(struct platform_device *pdev) +{ + struct lpc32xx_pwm_chip *lpc32xx; + struct resource *res; + int ret; + + lpc32xx = devm_kzalloc(&pdev->dev, sizeof(*lpc32xx), GFP_KERNEL); + if (!lpc32xx) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + lpc32xx->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(lpc32xx->base)) + return PTR_ERR(lpc32xx->base); + + lpc32xx->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(lpc32xx->clk)) + return PTR_ERR(lpc32xx->clk); + + lpc32xx->chip.dev = &pdev->dev; + lpc32xx->chip.ops = &lpc32xx_pwm_ops; + lpc32xx->chip.npwm = 2; + lpc32xx->chip.base = -1; + + ret = pwmchip_add(&lpc32xx->chip); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add PWM chip, error %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, lpc32xx); + + return 0; +} + +static int lpc32xx_pwm_remove(struct platform_device *pdev) +{ + struct lpc32xx_pwm_chip *lpc32xx = platform_get_drvdata(pdev); + unsigned int i; + + for (i = 0; i < lpc32xx->chip.npwm; i++) + pwm_disable(&lpc32xx->chip.pwms[i]); + + return pwmchip_remove(&lpc32xx->chip); +} + +static const struct of_device_id lpc32xx_pwm_dt_ids[] = { + { .compatible = "nxp,lpc3220-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, lpc32xx_pwm_dt_ids); + +static struct platform_driver lpc32xx_pwm_driver = { + .driver = { + .name = "lpc32xx-pwm", + .of_match_table = lpc32xx_pwm_dt_ids, + }, + .probe = lpc32xx_pwm_probe, + .remove = lpc32xx_pwm_remove, +}; +module_platform_driver(lpc32xx_pwm_driver); + +MODULE_ALIAS("platform:lpc32xx-pwm"); +MODULE_AUTHOR("Alexandre Pereira da Silva <aletes.xgr@gmail.com>"); +MODULE_DESCRIPTION("LPC32XX PWM Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-lpss-pci.c b/drivers/pwm/pwm-lpss-pci.c new file mode 100644 index 000000000..cf20d2bea --- /dev/null +++ b/drivers/pwm/pwm-lpss-pci.c @@ -0,0 +1,64 @@ +/* + * Intel Low Power Subsystem PWM controller PCI driver + * + * Copyright (C) 2014, Intel Corporation + * + * Derived from the original pwm-lpss.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> + +#include "pwm-lpss.h" + +static int pwm_lpss_probe_pci(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + const struct pwm_lpss_boardinfo *info; + struct pwm_lpss_chip *lpwm; + int err; + + err = pcim_enable_device(pdev); + if (err < 0) + return err; + + info = (struct pwm_lpss_boardinfo *)id->driver_data; + lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info); + if (IS_ERR(lpwm)) + return PTR_ERR(lpwm); + + pci_set_drvdata(pdev, lpwm); + return 0; +} + +static void pwm_lpss_remove_pci(struct pci_dev *pdev) +{ + struct pwm_lpss_chip *lpwm = pci_get_drvdata(pdev); + + pwm_lpss_remove(lpwm); +} + +static const struct pci_device_id pwm_lpss_pci_ids[] = { + { PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&pwm_lpss_byt_info}, + { PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&pwm_lpss_byt_info}, + { PCI_VDEVICE(INTEL, 0x2288), (unsigned long)&pwm_lpss_bsw_info}, + { PCI_VDEVICE(INTEL, 0x2289), (unsigned long)&pwm_lpss_bsw_info}, + { }, +}; +MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids); + +static struct pci_driver pwm_lpss_driver_pci = { + .name = "pwm-lpss", + .id_table = pwm_lpss_pci_ids, + .probe = pwm_lpss_probe_pci, + .remove = pwm_lpss_remove_pci, +}; +module_pci_driver(pwm_lpss_driver_pci); + +MODULE_DESCRIPTION("PWM PCI driver for Intel LPSS"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-lpss-platform.c b/drivers/pwm/pwm-lpss-platform.c new file mode 100644 index 000000000..18a9c880a --- /dev/null +++ b/drivers/pwm/pwm-lpss-platform.c @@ -0,0 +1,68 @@ +/* + * Intel Low Power Subsystem PWM controller driver + * + * Copyright (C) 2014, Intel Corporation + * + * Derived from the original pwm-lpss.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "pwm-lpss.h" + +static int pwm_lpss_probe_platform(struct platform_device *pdev) +{ + const struct pwm_lpss_boardinfo *info; + const struct acpi_device_id *id; + struct pwm_lpss_chip *lpwm; + struct resource *r; + + id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); + if (!id) + return -ENODEV; + + info = (const struct pwm_lpss_boardinfo *)id->driver_data; + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + lpwm = pwm_lpss_probe(&pdev->dev, r, info); + if (IS_ERR(lpwm)) + return PTR_ERR(lpwm); + + platform_set_drvdata(pdev, lpwm); + return 0; +} + +static int pwm_lpss_remove_platform(struct platform_device *pdev) +{ + struct pwm_lpss_chip *lpwm = platform_get_drvdata(pdev); + + return pwm_lpss_remove(lpwm); +} + +static const struct acpi_device_id pwm_lpss_acpi_match[] = { + { "80860F09", (unsigned long)&pwm_lpss_byt_info }, + { "80862288", (unsigned long)&pwm_lpss_bsw_info }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match); + +static struct platform_driver pwm_lpss_driver_platform = { + .driver = { + .name = "pwm-lpss", + .acpi_match_table = pwm_lpss_acpi_match, + }, + .probe = pwm_lpss_probe_platform, + .remove = pwm_lpss_remove_platform, +}; +module_platform_driver(pwm_lpss_driver_platform); + +MODULE_DESCRIPTION("PWM platform driver for Intel LPSS"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:pwm-lpss"); diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c new file mode 100644 index 000000000..e9798253a --- /dev/null +++ b/drivers/pwm/pwm-lpss.c @@ -0,0 +1,163 @@ +/* + * Intel Low Power Subsystem PWM controller driver + * + * Copyright (C) 2014, Intel Corporation + * Author: Mika Westerberg <mika.westerberg@linux.intel.com> + * Author: Chew Kean Ho <kean.ho.chew@intel.com> + * Author: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> + * Author: Chew Chiau Ee <chiau.ee.chew@intel.com> + * Author: Alan Cox <alan@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include "pwm-lpss.h" + +#define PWM 0x00000000 +#define PWM_ENABLE BIT(31) +#define PWM_SW_UPDATE BIT(30) +#define PWM_BASE_UNIT_SHIFT 8 +#define PWM_BASE_UNIT_MASK 0x00ffff00 +#define PWM_ON_TIME_DIV_MASK 0x000000ff +#define PWM_DIVISION_CORRECTION 0x2 +#define PWM_LIMIT (0x8000 + PWM_DIVISION_CORRECTION) +#define NSECS_PER_SEC 1000000000UL + +struct pwm_lpss_chip { + struct pwm_chip chip; + void __iomem *regs; + unsigned long clk_rate; +}; + +/* BayTrail */ +const struct pwm_lpss_boardinfo pwm_lpss_byt_info = { + .clk_rate = 25000000 +}; +EXPORT_SYMBOL_GPL(pwm_lpss_byt_info); + +/* Braswell */ +const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = { + .clk_rate = 19200000 +}; +EXPORT_SYMBOL_GPL(pwm_lpss_bsw_info); + +static inline struct pwm_lpss_chip *to_lpwm(struct pwm_chip *chip) +{ + return container_of(chip, struct pwm_lpss_chip, chip); +} + +static int pwm_lpss_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct pwm_lpss_chip *lpwm = to_lpwm(chip); + u8 on_time_div; + unsigned long c; + unsigned long long base_unit, freq = NSECS_PER_SEC; + u32 ctrl; + + do_div(freq, period_ns); + + /* The equation is: base_unit = ((freq / c) * 65536) + correction */ + base_unit = freq * 65536; + + c = lpwm->clk_rate; + if (!c) + return -EINVAL; + + do_div(base_unit, c); + base_unit += PWM_DIVISION_CORRECTION; + if (base_unit > PWM_LIMIT) + return -EINVAL; + + if (duty_ns <= 0) + duty_ns = 1; + on_time_div = 255 - (255 * duty_ns / period_ns); + + ctrl = readl(lpwm->regs + PWM); + ctrl &= ~(PWM_BASE_UNIT_MASK | PWM_ON_TIME_DIV_MASK); + ctrl |= (u16) base_unit << PWM_BASE_UNIT_SHIFT; + ctrl |= on_time_div; + /* request PWM to update on next cycle */ + ctrl |= PWM_SW_UPDATE; + writel(ctrl, lpwm->regs + PWM); + + return 0; +} + +static int pwm_lpss_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pwm_lpss_chip *lpwm = to_lpwm(chip); + u32 ctrl; + + ctrl = readl(lpwm->regs + PWM); + writel(ctrl | PWM_ENABLE, lpwm->regs + PWM); + + return 0; +} + +static void pwm_lpss_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pwm_lpss_chip *lpwm = to_lpwm(chip); + u32 ctrl; + + ctrl = readl(lpwm->regs + PWM); + writel(ctrl & ~PWM_ENABLE, lpwm->regs + PWM); +} + +static const struct pwm_ops pwm_lpss_ops = { + .config = pwm_lpss_config, + .enable = pwm_lpss_enable, + .disable = pwm_lpss_disable, + .owner = THIS_MODULE, +}; + +struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r, + const struct pwm_lpss_boardinfo *info) +{ + struct pwm_lpss_chip *lpwm; + int ret; + + lpwm = devm_kzalloc(dev, sizeof(*lpwm), GFP_KERNEL); + if (!lpwm) + return ERR_PTR(-ENOMEM); + + lpwm->regs = devm_ioremap_resource(dev, r); + if (IS_ERR(lpwm->regs)) + return ERR_CAST(lpwm->regs); + + lpwm->clk_rate = info->clk_rate; + lpwm->chip.dev = dev; + lpwm->chip.ops = &pwm_lpss_ops; + lpwm->chip.base = -1; + lpwm->chip.npwm = 1; + + ret = pwmchip_add(&lpwm->chip); + if (ret) { + dev_err(dev, "failed to add PWM chip: %d\n", ret); + return ERR_PTR(ret); + } + + return lpwm; +} +EXPORT_SYMBOL_GPL(pwm_lpss_probe); + +int pwm_lpss_remove(struct pwm_lpss_chip *lpwm) +{ + u32 ctrl; + + ctrl = readl(lpwm->regs + PWM); + writel(ctrl & ~PWM_ENABLE, lpwm->regs + PWM); + + return pwmchip_remove(&lpwm->chip); +} +EXPORT_SYMBOL_GPL(pwm_lpss_remove); + +MODULE_DESCRIPTION("PWM driver for Intel LPSS"); +MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-lpss.h b/drivers/pwm/pwm-lpss.h new file mode 100644 index 000000000..aa041bb1b --- /dev/null +++ b/drivers/pwm/pwm-lpss.h @@ -0,0 +1,32 @@ +/* + * Intel Low Power Subsystem PWM controller driver + * + * Copyright (C) 2014, Intel Corporation + * + * Derived from the original pwm-lpss.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PWM_LPSS_H +#define __PWM_LPSS_H + +#include <linux/device.h> +#include <linux/pwm.h> + +struct pwm_lpss_chip; + +struct pwm_lpss_boardinfo { + unsigned long clk_rate; +}; + +extern const struct pwm_lpss_boardinfo pwm_lpss_byt_info; +extern const struct pwm_lpss_boardinfo pwm_lpss_bsw_info; + +struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r, + const struct pwm_lpss_boardinfo *info); +int pwm_lpss_remove(struct pwm_lpss_chip *lpwm); + +#endif /* __PWM_LPSS_H */ diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c new file mode 100644 index 000000000..b430811e1 --- /dev/null +++ b/drivers/pwm/pwm-mxs.c @@ -0,0 +1,206 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> +#include <linux/stmp_device.h> + +#define SET 0x4 +#define CLR 0x8 +#define TOG 0xc + +#define PWM_CTRL 0x0 +#define PWM_ACTIVE0 0x10 +#define PWM_PERIOD0 0x20 +#define PERIOD_PERIOD(p) ((p) & 0xffff) +#define PERIOD_PERIOD_MAX 0x10000 +#define PERIOD_ACTIVE_HIGH (3 << 16) +#define PERIOD_INACTIVE_LOW (2 << 18) +#define PERIOD_CDIV(div) (((div) & 0x7) << 20) +#define PERIOD_CDIV_MAX 8 + +static const unsigned int cdiv[PERIOD_CDIV_MAX] = { + 1, 2, 4, 8, 16, 64, 256, 1024 +}; + +struct mxs_pwm_chip { + struct pwm_chip chip; + struct clk *clk; + void __iomem *base; +}; + +#define to_mxs_pwm_chip(_chip) container_of(_chip, struct mxs_pwm_chip, chip) + +static int mxs_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip); + int ret, div = 0; + unsigned int period_cycles, duty_cycles; + unsigned long rate; + unsigned long long c; + + rate = clk_get_rate(mxs->clk); + while (1) { + c = rate / cdiv[div]; + c = c * period_ns; + do_div(c, 1000000000); + if (c < PERIOD_PERIOD_MAX) + break; + div++; + if (div >= PERIOD_CDIV_MAX) + return -EINVAL; + } + + period_cycles = c; + c *= duty_ns; + do_div(c, period_ns); + duty_cycles = c; + + /* + * If the PWM channel is disabled, make sure to turn on the clock + * before writing the register. Otherwise, keep it enabled. + */ + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + ret = clk_prepare_enable(mxs->clk); + if (ret) + return ret; + } + + writel(duty_cycles << 16, + mxs->base + PWM_ACTIVE0 + pwm->hwpwm * 0x20); + writel(PERIOD_PERIOD(period_cycles) | PERIOD_ACTIVE_HIGH | + PERIOD_INACTIVE_LOW | PERIOD_CDIV(div), + mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20); + + /* + * If the PWM is not enabled, turn the clock off again to save power. + */ + if (!test_bit(PWMF_ENABLED, &pwm->flags)) + clk_disable_unprepare(mxs->clk); + + return 0; +} + +static int mxs_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip); + int ret; + + ret = clk_prepare_enable(mxs->clk); + if (ret) + return ret; + + writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET); + + return 0; +} + +static void mxs_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip); + + writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR); + + clk_disable_unprepare(mxs->clk); +} + +static const struct pwm_ops mxs_pwm_ops = { + .config = mxs_pwm_config, + .enable = mxs_pwm_enable, + .disable = mxs_pwm_disable, + .owner = THIS_MODULE, +}; + +static int mxs_pwm_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mxs_pwm_chip *mxs; + struct resource *res; + int ret; + + mxs = devm_kzalloc(&pdev->dev, sizeof(*mxs), GFP_KERNEL); + if (!mxs) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mxs->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mxs->base)) + return PTR_ERR(mxs->base); + + mxs->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(mxs->clk)) + return PTR_ERR(mxs->clk); + + mxs->chip.dev = &pdev->dev; + mxs->chip.ops = &mxs_pwm_ops; + mxs->chip.base = -1; + mxs->chip.can_sleep = true; + ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret); + return ret; + } + + ret = pwmchip_add(&mxs->chip); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, mxs); + + ret = stmp_reset_block(mxs->base); + if (ret) + goto pwm_remove; + + return 0; + +pwm_remove: + pwmchip_remove(&mxs->chip); + return ret; +} + +static int mxs_pwm_remove(struct platform_device *pdev) +{ + struct mxs_pwm_chip *mxs = platform_get_drvdata(pdev); + + return pwmchip_remove(&mxs->chip); +} + +static const struct of_device_id mxs_pwm_dt_ids[] = { + { .compatible = "fsl,imx23-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_pwm_dt_ids); + +static struct platform_driver mxs_pwm_driver = { + .driver = { + .name = "mxs-pwm", + .of_match_table = mxs_pwm_dt_ids, + }, + .probe = mxs_pwm_probe, + .remove = mxs_pwm_remove, +}; +module_platform_driver(mxs_pwm_driver); + +MODULE_ALIAS("platform:mxs-pwm"); +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); +MODULE_DESCRIPTION("Freescale MXS PWM Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c new file mode 100644 index 000000000..34b5c275a --- /dev/null +++ b/drivers/pwm/pwm-pca9685.c @@ -0,0 +1,300 @@ +/* + * Driver for PCA9685 16-channel 12-bit PWM LED controller + * + * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * based on the pwm-twl-led.c driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define PCA9685_MODE1 0x00 +#define PCA9685_MODE2 0x01 +#define PCA9685_SUBADDR1 0x02 +#define PCA9685_SUBADDR2 0x03 +#define PCA9685_SUBADDR3 0x04 +#define PCA9685_ALLCALLADDR 0x05 +#define PCA9685_LEDX_ON_L 0x06 +#define PCA9685_LEDX_ON_H 0x07 +#define PCA9685_LEDX_OFF_L 0x08 +#define PCA9685_LEDX_OFF_H 0x09 + +#define PCA9685_ALL_LED_ON_L 0xFA +#define PCA9685_ALL_LED_ON_H 0xFB +#define PCA9685_ALL_LED_OFF_L 0xFC +#define PCA9685_ALL_LED_OFF_H 0xFD +#define PCA9685_PRESCALE 0xFE + +#define PCA9685_NUMREGS 0xFF +#define PCA9685_MAXCHAN 0x10 + +#define LED_FULL (1 << 4) +#define MODE1_SLEEP (1 << 4) +#define MODE2_INVRT (1 << 4) +#define MODE2_OUTDRV (1 << 2) + +#define LED_N_ON_H(N) (PCA9685_LEDX_ON_H + (4 * (N))) +#define LED_N_ON_L(N) (PCA9685_LEDX_ON_L + (4 * (N))) +#define LED_N_OFF_H(N) (PCA9685_LEDX_OFF_H + (4 * (N))) +#define LED_N_OFF_L(N) (PCA9685_LEDX_OFF_L + (4 * (N))) + +struct pca9685 { + struct pwm_chip chip; + struct regmap *regmap; + int active_cnt; +}; + +static inline struct pca9685 *to_pca(struct pwm_chip *chip) +{ + return container_of(chip, struct pca9685, chip); +} + +static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct pca9685 *pca = to_pca(chip); + unsigned long long duty; + unsigned int reg; + + if (duty_ns < 1) { + if (pwm->hwpwm >= PCA9685_MAXCHAN) + reg = PCA9685_ALL_LED_OFF_H; + else + reg = LED_N_OFF_H(pwm->hwpwm); + + regmap_write(pca->regmap, reg, LED_FULL); + + return 0; + } + + if (duty_ns == period_ns) { + if (pwm->hwpwm >= PCA9685_MAXCHAN) + reg = PCA9685_ALL_LED_ON_H; + else + reg = LED_N_ON_H(pwm->hwpwm); + + regmap_write(pca->regmap, reg, LED_FULL); + + return 0; + } + + duty = 4096 * (unsigned long long)duty_ns; + duty = DIV_ROUND_UP_ULL(duty, period_ns); + + if (pwm->hwpwm >= PCA9685_MAXCHAN) + reg = PCA9685_ALL_LED_OFF_L; + else + reg = LED_N_OFF_L(pwm->hwpwm); + + regmap_write(pca->regmap, reg, (int)duty & 0xff); + + if (pwm->hwpwm >= PCA9685_MAXCHAN) + reg = PCA9685_ALL_LED_OFF_H; + else + reg = LED_N_OFF_H(pwm->hwpwm); + + regmap_write(pca->regmap, reg, ((int)duty >> 8) & 0xf); + + return 0; +} + +static int pca9685_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pca9685 *pca = to_pca(chip); + unsigned int reg; + + /* + * The PWM subsystem does not support a pre-delay. + * So, set the ON-timeout to 0 + */ + if (pwm->hwpwm >= PCA9685_MAXCHAN) + reg = PCA9685_ALL_LED_ON_L; + else + reg = LED_N_ON_L(pwm->hwpwm); + + regmap_write(pca->regmap, reg, 0); + + if (pwm->hwpwm >= PCA9685_MAXCHAN) + reg = PCA9685_ALL_LED_ON_H; + else + reg = LED_N_ON_H(pwm->hwpwm); + + regmap_write(pca->regmap, reg, 0); + + /* + * Clear the full-off bit. + * It has precedence over the others and must be off. + */ + if (pwm->hwpwm >= PCA9685_MAXCHAN) + reg = PCA9685_ALL_LED_OFF_H; + else + reg = LED_N_OFF_H(pwm->hwpwm); + + regmap_update_bits(pca->regmap, reg, LED_FULL, 0x0); + + return 0; +} + +static void pca9685_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pca9685 *pca = to_pca(chip); + unsigned int reg; + + if (pwm->hwpwm >= PCA9685_MAXCHAN) + reg = PCA9685_ALL_LED_OFF_H; + else + reg = LED_N_OFF_H(pwm->hwpwm); + + regmap_write(pca->regmap, reg, LED_FULL); + + /* Clear the LED_OFF counter. */ + if (pwm->hwpwm >= PCA9685_MAXCHAN) + reg = PCA9685_ALL_LED_OFF_L; + else + reg = LED_N_OFF_L(pwm->hwpwm); + + regmap_write(pca->regmap, reg, 0x0); +} + +static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pca9685 *pca = to_pca(chip); + + if (pca->active_cnt++ == 0) + return regmap_update_bits(pca->regmap, PCA9685_MODE1, + MODE1_SLEEP, 0x0); + + return 0; +} + +static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pca9685 *pca = to_pca(chip); + + if (--pca->active_cnt == 0) + regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP, + MODE1_SLEEP); +} + +static const struct pwm_ops pca9685_pwm_ops = { + .enable = pca9685_pwm_enable, + .disable = pca9685_pwm_disable, + .config = pca9685_pwm_config, + .request = pca9685_pwm_request, + .free = pca9685_pwm_free, + .owner = THIS_MODULE, +}; + +static const struct regmap_config pca9685_regmap_i2c_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = PCA9685_NUMREGS, + .cache_type = REGCACHE_NONE, +}; + +static int pca9685_pwm_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *np = client->dev.of_node; + struct pca9685 *pca; + int ret; + int mode2; + + pca = devm_kzalloc(&client->dev, sizeof(*pca), GFP_KERNEL); + if (!pca) + return -ENOMEM; + + pca->regmap = devm_regmap_init_i2c(client, &pca9685_regmap_i2c_config); + if (IS_ERR(pca->regmap)) { + ret = PTR_ERR(pca->regmap); + dev_err(&client->dev, "Failed to initialize register map: %d\n", + ret); + return ret; + } + + i2c_set_clientdata(client, pca); + + regmap_read(pca->regmap, PCA9685_MODE2, &mode2); + + if (of_property_read_bool(np, "invert")) + mode2 |= MODE2_INVRT; + else + mode2 &= ~MODE2_INVRT; + + if (of_property_read_bool(np, "open-drain")) + mode2 &= ~MODE2_OUTDRV; + else + mode2 |= MODE2_OUTDRV; + + regmap_write(pca->regmap, PCA9685_MODE2, mode2); + + /* clear all "full off" bits */ + regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, 0); + regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, 0); + + pca->chip.ops = &pca9685_pwm_ops; + /* add an extra channel for ALL_LED */ + pca->chip.npwm = PCA9685_MAXCHAN + 1; + + pca->chip.dev = &client->dev; + pca->chip.base = -1; + pca->chip.can_sleep = true; + + return pwmchip_add(&pca->chip); +} + +static int pca9685_pwm_remove(struct i2c_client *client) +{ + struct pca9685 *pca = i2c_get_clientdata(client); + + regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP, + MODE1_SLEEP); + + return pwmchip_remove(&pca->chip); +} + +static const struct i2c_device_id pca9685_id[] = { + { "pca9685", 0 }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(i2c, pca9685_id); + +static const struct of_device_id pca9685_dt_ids[] = { + { .compatible = "nxp,pca9685-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, pca9685_dt_ids); + +static struct i2c_driver pca9685_i2c_driver = { + .driver = { + .name = "pca9685-pwm", + .owner = THIS_MODULE, + .of_match_table = pca9685_dt_ids, + }, + .probe = pca9685_pwm_probe, + .remove = pca9685_pwm_remove, + .id_table = pca9685_id, +}; + +module_i2c_driver(pca9685_i2c_driver); + +MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de>"); +MODULE_DESCRIPTION("PWM driver for PCA9685"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-puv3.c b/drivers/pwm/pwm-puv3.c new file mode 100644 index 000000000..ed6007b27 --- /dev/null +++ b/drivers/pwm/pwm-puv3.c @@ -0,0 +1,155 @@ +/* + * linux/arch/unicore32/kernel/pwm.c + * + * Code specific to PKUnity SoC and UniCore ISA + * + * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> + * Copyright (C) 2001-2010 Guan Xuetao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pwm.h> + +#include <asm/div64.h> +#include <mach/hardware.h> + +struct puv3_pwm_chip { + struct pwm_chip chip; + void __iomem *base; + struct clk *clk; +}; + +static inline struct puv3_pwm_chip *to_puv3(struct pwm_chip *chip) +{ + return container_of(chip, struct puv3_pwm_chip, chip); +} + +/* + * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE + * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE + */ +static int puv3_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + unsigned long period_cycles, prescale, pv, dc; + struct puv3_pwm_chip *puv3 = to_puv3(chip); + unsigned long long c; + + c = clk_get_rate(puv3->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + if (period_cycles < 1) + period_cycles = 1; + + prescale = (period_cycles - 1) / 1024; + pv = period_cycles / (prescale + 1) - 1; + + if (prescale > 63) + return -EINVAL; + + if (duty_ns == period_ns) + dc = OST_PWMDCCR_FDCYCLE; + else + dc = (pv + 1) * duty_ns / period_ns; + + /* + * NOTE: the clock to PWM has to be enabled first + * before writing to the registers + */ + clk_prepare_enable(puv3->clk); + + writel(prescale, puv3->base + OST_PWM_PWCR); + writel(pv - dc, puv3->base + OST_PWM_DCCR); + writel(pv, puv3->base + OST_PWM_PCR); + + clk_disable_unprepare(puv3->clk); + + return 0; +} + +static int puv3_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct puv3_pwm_chip *puv3 = to_puv3(chip); + + return clk_prepare_enable(puv3->clk); +} + +static void puv3_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct puv3_pwm_chip *puv3 = to_puv3(chip); + + clk_disable_unprepare(puv3->clk); +} + +static const struct pwm_ops puv3_pwm_ops = { + .config = puv3_pwm_config, + .enable = puv3_pwm_enable, + .disable = puv3_pwm_disable, + .owner = THIS_MODULE, +}; + +static int pwm_probe(struct platform_device *pdev) +{ + struct puv3_pwm_chip *puv3; + struct resource *r; + int ret; + + puv3 = devm_kzalloc(&pdev->dev, sizeof(*puv3), GFP_KERNEL); + if (puv3 == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + puv3->clk = devm_clk_get(&pdev->dev, "OST_CLK"); + if (IS_ERR(puv3->clk)) + return PTR_ERR(puv3->clk); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + puv3->base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(puv3->base)) + return PTR_ERR(puv3->base); + + puv3->chip.dev = &pdev->dev; + puv3->chip.ops = &puv3_pwm_ops; + puv3->chip.base = -1; + puv3->chip.npwm = 1; + + ret = pwmchip_add(&puv3->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, puv3); + return 0; +} + +static int pwm_remove(struct platform_device *pdev) +{ + struct puv3_pwm_chip *puv3 = platform_get_drvdata(pdev); + + return pwmchip_remove(&puv3->chip); +} + +static struct platform_driver puv3_pwm_driver = { + .driver = { + .name = "PKUnity-v3-PWM", + }, + .probe = pwm_probe, + .remove = pwm_remove, +}; +module_platform_driver(puv3_pwm_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c new file mode 100644 index 000000000..cb2f7024c --- /dev/null +++ b/drivers/pwm/pwm-pxa.c @@ -0,0 +1,237 @@ +/* + * drivers/pwm/pwm-pxa.c + * + * simple driver for PWM (Pulse Width Modulator) controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * 2008-02-13 initial version + * eric miao <eric.miao@marvell.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pwm.h> +#include <linux/of_device.h> + +#include <asm/div64.h> + +#define HAS_SECONDARY_PWM 0x10 + +static const struct platform_device_id pwm_id_table[] = { + /* PWM has_secondary_pwm? */ + { "pxa25x-pwm", 0 }, + { "pxa27x-pwm", HAS_SECONDARY_PWM }, + { "pxa168-pwm", 0 }, + { "pxa910-pwm", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(platform, pwm_id_table); + +/* PWM registers and bits definitions */ +#define PWMCR (0x00) +#define PWMDCR (0x04) +#define PWMPCR (0x08) + +#define PWMCR_SD (1 << 6) +#define PWMDCR_FD (1 << 10) + +struct pxa_pwm_chip { + struct pwm_chip chip; + struct device *dev; + + struct clk *clk; + void __iomem *mmio_base; +}; + +static inline struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct pxa_pwm_chip, chip); +} + +/* + * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE + * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE + */ +static int pxa_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip); + unsigned long long c; + unsigned long period_cycles, prescale, pv, dc; + unsigned long offset; + int rc; + + offset = pwm->hwpwm ? 0x10 : 0; + + c = clk_get_rate(pc->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + if (period_cycles < 1) + period_cycles = 1; + prescale = (period_cycles - 1) / 1024; + pv = period_cycles / (prescale + 1) - 1; + + if (prescale > 63) + return -EINVAL; + + if (duty_ns == period_ns) + dc = PWMDCR_FD; + else + dc = (pv + 1) * duty_ns / period_ns; + + /* NOTE: the clock to PWM has to be enabled first + * before writing to the registers + */ + rc = clk_prepare_enable(pc->clk); + if (rc < 0) + return rc; + + writel(prescale, pc->mmio_base + offset + PWMCR); + writel(dc, pc->mmio_base + offset + PWMDCR); + writel(pv, pc->mmio_base + offset + PWMPCR); + + clk_disable_unprepare(pc->clk); + return 0; +} + +static int pxa_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip); + + return clk_prepare_enable(pc->clk); +} + +static void pxa_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip); + + clk_disable_unprepare(pc->clk); +} + +static struct pwm_ops pxa_pwm_ops = { + .config = pxa_pwm_config, + .enable = pxa_pwm_enable, + .disable = pxa_pwm_disable, + .owner = THIS_MODULE, +}; + +#ifdef CONFIG_OF +/* + * Device tree users must create one device instance for each PWM channel. + * Hence we dispense with the HAS_SECONDARY_PWM and "tell" the original driver + * code that this is a single channel pxa25x-pwm. Currently all devices are + * supported identically. + */ +static const struct of_device_id pwm_of_match[] = { + { .compatible = "marvell,pxa250-pwm", .data = &pwm_id_table[0]}, + { .compatible = "marvell,pxa270-pwm", .data = &pwm_id_table[0]}, + { .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[0]}, + { .compatible = "marvell,pxa910-pwm", .data = &pwm_id_table[0]}, + { } +}; +MODULE_DEVICE_TABLE(of, pwm_of_match); +#else +#define pwm_of_match NULL +#endif + +static const struct platform_device_id *pxa_pwm_get_id_dt(struct device *dev) +{ + const struct of_device_id *id = of_match_device(pwm_of_match, dev); + + return id ? id->data : NULL; +} + +static struct pwm_device * +pxa_pwm_of_xlate(struct pwm_chip *pc, const struct of_phandle_args *args) +{ + struct pwm_device *pwm; + + pwm = pwm_request_from_chip(pc, 0, NULL); + if (IS_ERR(pwm)) + return pwm; + + pwm_set_period(pwm, args->args[0]); + + return pwm; +} + +static int pwm_probe(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct pxa_pwm_chip *pwm; + struct resource *r; + int ret = 0; + + if (IS_ENABLED(CONFIG_OF) && id == NULL) + id = pxa_pwm_get_id_dt(&pdev->dev); + + if (id == NULL) + return -EINVAL; + + pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); + if (pwm == NULL) + return -ENOMEM; + + pwm->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pwm->clk)) + return PTR_ERR(pwm->clk); + + pwm->chip.dev = &pdev->dev; + pwm->chip.ops = &pxa_pwm_ops; + pwm->chip.base = -1; + pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1; + + if (IS_ENABLED(CONFIG_OF)) { + pwm->chip.of_xlate = pxa_pwm_of_xlate; + pwm->chip.of_pwm_n_cells = 1; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(pwm->mmio_base)) + return PTR_ERR(pwm->mmio_base); + + ret = pwmchip_add(&pwm->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, pwm); + return 0; +} + +static int pwm_remove(struct platform_device *pdev) +{ + struct pxa_pwm_chip *chip; + + chip = platform_get_drvdata(pdev); + if (chip == NULL) + return -ENODEV; + + return pwmchip_remove(&chip->chip); +} + +static struct platform_driver pwm_driver = { + .driver = { + .name = "pxa25x-pwm", + .of_match_table = pwm_of_match, + }, + .probe = pwm_probe, + .remove = pwm_remove, + .id_table = pwm_id_table, +}; + +module_platform_driver(pwm_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c new file mode 100644 index 000000000..ee63f9e9d --- /dev/null +++ b/drivers/pwm/pwm-renesas-tpu.c @@ -0,0 +1,480 @@ +/* + * R-Mobile TPU PWM driver + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/pwm.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#define TPU_CHANNEL_MAX 4 + +#define TPU_TSTR 0x00 /* Timer start register (shared) */ + +#define TPU_TCRn 0x00 /* Timer control register */ +#define TPU_TCR_CCLR_NONE (0 << 5) +#define TPU_TCR_CCLR_TGRA (1 << 5) +#define TPU_TCR_CCLR_TGRB (2 << 5) +#define TPU_TCR_CCLR_TGRC (5 << 5) +#define TPU_TCR_CCLR_TGRD (6 << 5) +#define TPU_TCR_CKEG_RISING (0 << 3) +#define TPU_TCR_CKEG_FALLING (1 << 3) +#define TPU_TCR_CKEG_BOTH (2 << 3) +#define TPU_TMDRn 0x04 /* Timer mode register */ +#define TPU_TMDR_BFWT (1 << 6) +#define TPU_TMDR_BFB (1 << 5) +#define TPU_TMDR_BFA (1 << 4) +#define TPU_TMDR_MD_NORMAL (0 << 0) +#define TPU_TMDR_MD_PWM (2 << 0) +#define TPU_TIORn 0x08 /* Timer I/O control register */ +#define TPU_TIOR_IOA_0 (0 << 0) +#define TPU_TIOR_IOA_0_CLR (1 << 0) +#define TPU_TIOR_IOA_0_SET (2 << 0) +#define TPU_TIOR_IOA_0_TOGGLE (3 << 0) +#define TPU_TIOR_IOA_1 (4 << 0) +#define TPU_TIOR_IOA_1_CLR (5 << 0) +#define TPU_TIOR_IOA_1_SET (6 << 0) +#define TPU_TIOR_IOA_1_TOGGLE (7 << 0) +#define TPU_TIERn 0x0c /* Timer interrupt enable register */ +#define TPU_TSRn 0x10 /* Timer status register */ +#define TPU_TCNTn 0x14 /* Timer counter */ +#define TPU_TGRAn 0x18 /* Timer general register A */ +#define TPU_TGRBn 0x1c /* Timer general register B */ +#define TPU_TGRCn 0x20 /* Timer general register C */ +#define TPU_TGRDn 0x24 /* Timer general register D */ + +#define TPU_CHANNEL_OFFSET 0x10 +#define TPU_CHANNEL_SIZE 0x40 + +enum tpu_pin_state { + TPU_PIN_INACTIVE, /* Pin is driven inactive */ + TPU_PIN_PWM, /* Pin is driven by PWM */ + TPU_PIN_ACTIVE, /* Pin is driven active */ +}; + +struct tpu_device; + +struct tpu_pwm_device { + bool timer_on; /* Whether the timer is running */ + + struct tpu_device *tpu; + unsigned int channel; /* Channel number in the TPU */ + + enum pwm_polarity polarity; + unsigned int prescaler; + u16 period; + u16 duty; +}; + +struct tpu_device { + struct platform_device *pdev; + struct pwm_chip chip; + spinlock_t lock; + + void __iomem *base; + struct clk *clk; +}; + +#define to_tpu_device(c) container_of(c, struct tpu_device, chip) + +static void tpu_pwm_write(struct tpu_pwm_device *pwm, int reg_nr, u16 value) +{ + void __iomem *base = pwm->tpu->base + TPU_CHANNEL_OFFSET + + pwm->channel * TPU_CHANNEL_SIZE; + + iowrite16(value, base + reg_nr); +} + +static void tpu_pwm_set_pin(struct tpu_pwm_device *pwm, + enum tpu_pin_state state) +{ + static const char * const states[] = { "inactive", "PWM", "active" }; + + dev_dbg(&pwm->tpu->pdev->dev, "%u: configuring pin as %s\n", + pwm->channel, states[state]); + + switch (state) { + case TPU_PIN_INACTIVE: + tpu_pwm_write(pwm, TPU_TIORn, + pwm->polarity == PWM_POLARITY_INVERSED ? + TPU_TIOR_IOA_1 : TPU_TIOR_IOA_0); + break; + case TPU_PIN_PWM: + tpu_pwm_write(pwm, TPU_TIORn, + pwm->polarity == PWM_POLARITY_INVERSED ? + TPU_TIOR_IOA_0_SET : TPU_TIOR_IOA_1_CLR); + break; + case TPU_PIN_ACTIVE: + tpu_pwm_write(pwm, TPU_TIORn, + pwm->polarity == PWM_POLARITY_INVERSED ? + TPU_TIOR_IOA_0 : TPU_TIOR_IOA_1); + break; + } +} + +static void tpu_pwm_start_stop(struct tpu_pwm_device *pwm, int start) +{ + unsigned long flags; + u16 value; + + spin_lock_irqsave(&pwm->tpu->lock, flags); + value = ioread16(pwm->tpu->base + TPU_TSTR); + + if (start) + value |= 1 << pwm->channel; + else + value &= ~(1 << pwm->channel); + + iowrite16(value, pwm->tpu->base + TPU_TSTR); + spin_unlock_irqrestore(&pwm->tpu->lock, flags); +} + +static int tpu_pwm_timer_start(struct tpu_pwm_device *pwm) +{ + int ret; + + if (!pwm->timer_on) { + /* Wake up device and enable clock. */ + pm_runtime_get_sync(&pwm->tpu->pdev->dev); + ret = clk_prepare_enable(pwm->tpu->clk); + if (ret) { + dev_err(&pwm->tpu->pdev->dev, "cannot enable clock\n"); + return ret; + } + pwm->timer_on = true; + } + + /* + * Make sure the channel is stopped, as we need to reconfigure it + * completely. First drive the pin to the inactive state to avoid + * glitches. + */ + tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE); + tpu_pwm_start_stop(pwm, false); + + /* + * - Clear TCNT on TGRB match + * - Count on rising edge + * - Set prescaler + * - Output 0 until TGRA, output 1 until TGRB (active low polarity) + * - Output 1 until TGRA, output 0 until TGRB (active high polarity + * - PWM mode + */ + tpu_pwm_write(pwm, TPU_TCRn, TPU_TCR_CCLR_TGRB | TPU_TCR_CKEG_RISING | + pwm->prescaler); + tpu_pwm_write(pwm, TPU_TMDRn, TPU_TMDR_MD_PWM); + tpu_pwm_set_pin(pwm, TPU_PIN_PWM); + tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty); + tpu_pwm_write(pwm, TPU_TGRBn, pwm->period); + + dev_dbg(&pwm->tpu->pdev->dev, "%u: TGRA 0x%04x TGRB 0x%04x\n", + pwm->channel, pwm->duty, pwm->period); + + /* Start the channel. */ + tpu_pwm_start_stop(pwm, true); + + return 0; +} + +static void tpu_pwm_timer_stop(struct tpu_pwm_device *pwm) +{ + if (!pwm->timer_on) + return; + + /* Disable channel. */ + tpu_pwm_start_stop(pwm, false); + + /* Stop clock and mark device as idle. */ + clk_disable_unprepare(pwm->tpu->clk); + pm_runtime_put(&pwm->tpu->pdev->dev); + + pwm->timer_on = false; +} + +/* ----------------------------------------------------------------------------- + * PWM API + */ + +static int tpu_pwm_request(struct pwm_chip *chip, struct pwm_device *_pwm) +{ + struct tpu_device *tpu = to_tpu_device(chip); + struct tpu_pwm_device *pwm; + + if (_pwm->hwpwm >= TPU_CHANNEL_MAX) + return -EINVAL; + + pwm = kzalloc(sizeof(*pwm), GFP_KERNEL); + if (pwm == NULL) + return -ENOMEM; + + pwm->tpu = tpu; + pwm->channel = _pwm->hwpwm; + pwm->polarity = PWM_POLARITY_NORMAL; + pwm->prescaler = 0; + pwm->period = 0; + pwm->duty = 0; + + pwm->timer_on = false; + + pwm_set_chip_data(_pwm, pwm); + + return 0; +} + +static void tpu_pwm_free(struct pwm_chip *chip, struct pwm_device *_pwm) +{ + struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); + + tpu_pwm_timer_stop(pwm); + kfree(pwm); +} + +static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *_pwm, + int duty_ns, int period_ns) +{ + static const unsigned int prescalers[] = { 1, 4, 16, 64 }; + struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); + struct tpu_device *tpu = to_tpu_device(chip); + unsigned int prescaler; + bool duty_only = false; + u32 clk_rate; + u32 period; + u32 duty; + int ret; + + /* + * Pick a prescaler to avoid overflowing the counter. + * TODO: Pick the highest acceptable prescaler. + */ + clk_rate = clk_get_rate(tpu->clk); + + for (prescaler = 0; prescaler < ARRAY_SIZE(prescalers); ++prescaler) { + period = clk_rate / prescalers[prescaler] + / (NSEC_PER_SEC / period_ns); + if (period <= 0xffff) + break; + } + + if (prescaler == ARRAY_SIZE(prescalers) || period == 0) { + dev_err(&tpu->pdev->dev, "clock rate mismatch\n"); + return -ENOTSUPP; + } + + if (duty_ns) { + duty = clk_rate / prescalers[prescaler] + / (NSEC_PER_SEC / duty_ns); + if (duty > period) + return -EINVAL; + } else { + duty = 0; + } + + dev_dbg(&tpu->pdev->dev, + "rate %u, prescaler %u, period %u, duty %u\n", + clk_rate, prescalers[prescaler], period, duty); + + if (pwm->prescaler == prescaler && pwm->period == period) + duty_only = true; + + pwm->prescaler = prescaler; + pwm->period = period; + pwm->duty = duty; + + /* If the channel is disabled we're done. */ + if (!test_bit(PWMF_ENABLED, &_pwm->flags)) + return 0; + + if (duty_only && pwm->timer_on) { + /* + * If only the duty cycle changed and the timer is already + * running, there's no need to reconfigure it completely, Just + * modify the duty cycle. + */ + tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty); + dev_dbg(&tpu->pdev->dev, "%u: TGRA 0x%04x\n", pwm->channel, + pwm->duty); + } else { + /* Otherwise perform a full reconfiguration. */ + ret = tpu_pwm_timer_start(pwm); + if (ret < 0) + return ret; + } + + if (duty == 0 || duty == period) { + /* + * To avoid running the timer when not strictly required, handle + * 0% and 100% duty cycles as fixed levels and stop the timer. + */ + tpu_pwm_set_pin(pwm, duty ? TPU_PIN_ACTIVE : TPU_PIN_INACTIVE); + tpu_pwm_timer_stop(pwm); + } + + return 0; +} + +static int tpu_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *_pwm, + enum pwm_polarity polarity) +{ + struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); + + pwm->polarity = polarity; + + return 0; +} + +static int tpu_pwm_enable(struct pwm_chip *chip, struct pwm_device *_pwm) +{ + struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); + int ret; + + ret = tpu_pwm_timer_start(pwm); + if (ret < 0) + return ret; + + /* + * To avoid running the timer when not strictly required, handle 0% and + * 100% duty cycles as fixed levels and stop the timer. + */ + if (pwm->duty == 0 || pwm->duty == pwm->period) { + tpu_pwm_set_pin(pwm, pwm->duty ? + TPU_PIN_ACTIVE : TPU_PIN_INACTIVE); + tpu_pwm_timer_stop(pwm); + } + + return 0; +} + +static void tpu_pwm_disable(struct pwm_chip *chip, struct pwm_device *_pwm) +{ + struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); + + /* The timer must be running to modify the pin output configuration. */ + tpu_pwm_timer_start(pwm); + tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE); + tpu_pwm_timer_stop(pwm); +} + +static const struct pwm_ops tpu_pwm_ops = { + .request = tpu_pwm_request, + .free = tpu_pwm_free, + .config = tpu_pwm_config, + .set_polarity = tpu_pwm_set_polarity, + .enable = tpu_pwm_enable, + .disable = tpu_pwm_disable, + .owner = THIS_MODULE, +}; + +/* ----------------------------------------------------------------------------- + * Probe and remove + */ + +static int tpu_probe(struct platform_device *pdev) +{ + struct tpu_device *tpu; + struct resource *res; + int ret; + + tpu = devm_kzalloc(&pdev->dev, sizeof(*tpu), GFP_KERNEL); + if (tpu == NULL) + return -ENOMEM; + + spin_lock_init(&tpu->lock); + tpu->pdev = pdev; + + /* Map memory, get clock and pin control. */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tpu->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(tpu->base)) + return PTR_ERR(tpu->base); + + tpu->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(tpu->clk)) { + dev_err(&pdev->dev, "cannot get clock\n"); + return PTR_ERR(tpu->clk); + } + + /* Initialize and register the device. */ + platform_set_drvdata(pdev, tpu); + + tpu->chip.dev = &pdev->dev; + tpu->chip.ops = &tpu_pwm_ops; + tpu->chip.of_xlate = of_pwm_xlate_with_flags; + tpu->chip.of_pwm_n_cells = 3; + tpu->chip.base = -1; + tpu->chip.npwm = TPU_CHANNEL_MAX; + + ret = pwmchip_add(&tpu->chip); + if (ret < 0) { + dev_err(&pdev->dev, "failed to register PWM chip\n"); + return ret; + } + + dev_info(&pdev->dev, "TPU PWM %d registered\n", tpu->pdev->id); + + pm_runtime_enable(&pdev->dev); + + return 0; +} + +static int tpu_remove(struct platform_device *pdev) +{ + struct tpu_device *tpu = platform_get_drvdata(pdev); + int ret; + + ret = pwmchip_remove(&tpu->chip); + if (ret) + return ret; + + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id tpu_of_table[] = { + { .compatible = "renesas,tpu-r8a73a4", }, + { .compatible = "renesas,tpu-r8a7740", }, + { .compatible = "renesas,tpu-r8a7790", }, + { .compatible = "renesas,tpu-sh7372", }, + { .compatible = "renesas,tpu", }, + { }, +}; + +MODULE_DEVICE_TABLE(of, tpu_of_table); +#endif + +static struct platform_driver tpu_driver = { + .probe = tpu_probe, + .remove = tpu_remove, + .driver = { + .name = "renesas-tpu-pwm", + .of_match_table = of_match_ptr(tpu_of_table), + } +}; + +module_platform_driver(tpu_driver); + +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_DESCRIPTION("Renesas TPU PWM Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:renesas-tpu-pwm"); diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c new file mode 100644 index 000000000..9442df244 --- /dev/null +++ b/drivers/pwm/pwm-rockchip.c @@ -0,0 +1,303 @@ +/* + * PWM driver for Rockchip SoCs + * + * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com> + * Copyright (C) 2014 ROCKCHIP, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/time.h> + +#define PWM_CTRL_TIMER_EN (1 << 0) +#define PWM_CTRL_OUTPUT_EN (1 << 3) + +#define PWM_ENABLE (1 << 0) +#define PWM_CONTINUOUS (1 << 1) +#define PWM_DUTY_POSITIVE (1 << 3) +#define PWM_DUTY_NEGATIVE (0 << 3) +#define PWM_INACTIVE_NEGATIVE (0 << 4) +#define PWM_INACTIVE_POSITIVE (1 << 4) +#define PWM_OUTPUT_LEFT (0 << 5) +#define PWM_LP_DISABLE (0 << 8) + +struct rockchip_pwm_chip { + struct pwm_chip chip; + struct clk *clk; + const struct rockchip_pwm_data *data; + void __iomem *base; +}; + +struct rockchip_pwm_regs { + unsigned long duty; + unsigned long period; + unsigned long cntr; + unsigned long ctrl; +}; + +struct rockchip_pwm_data { + struct rockchip_pwm_regs regs; + unsigned int prescaler; + const struct pwm_ops *ops; + + void (*set_enable)(struct pwm_chip *chip, + struct pwm_device *pwm, bool enable); +}; + +static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c) +{ + return container_of(c, struct rockchip_pwm_chip, chip); +} + +static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, + struct pwm_device *pwm, bool enable) +{ + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); + u32 enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN; + u32 val; + + val = readl_relaxed(pc->base + pc->data->regs.ctrl); + + if (enable) + val |= enable_conf; + else + val &= ~enable_conf; + + writel_relaxed(val, pc->base + pc->data->regs.ctrl); +} + +static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, + struct pwm_device *pwm, bool enable) +{ + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); + u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE | + PWM_CONTINUOUS; + u32 val; + + if (pwm->polarity == PWM_POLARITY_INVERSED) + enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE; + else + enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE; + + val = readl_relaxed(pc->base + pc->data->regs.ctrl); + + if (enable) + val |= enable_conf; + else + val &= ~enable_conf; + + writel_relaxed(val, pc->base + pc->data->regs.ctrl); +} + +static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); + unsigned long period, duty; + u64 clk_rate, div; + int ret; + + clk_rate = clk_get_rate(pc->clk); + + /* + * Since period and duty cycle registers have a width of 32 + * bits, every possible input period can be obtained using the + * default prescaler value for all practical clock rate values. + */ + div = clk_rate * period_ns; + do_div(div, pc->data->prescaler * NSEC_PER_SEC); + period = div; + + div = clk_rate * duty_ns; + do_div(div, pc->data->prescaler * NSEC_PER_SEC); + duty = div; + + ret = clk_enable(pc->clk); + if (ret) + return ret; + + writel(period, pc->base + pc->data->regs.period); + writel(duty, pc->base + pc->data->regs.duty); + writel(0, pc->base + pc->data->regs.cntr); + + clk_disable(pc->clk); + + return 0; +} + +static int rockchip_pwm_set_polarity(struct pwm_chip *chip, + struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + /* + * No action needed here because pwm->polarity will be set by the core + * and the core will only change polarity when the PWM is not enabled. + * We'll handle things in set_enable(). + */ + + return 0; +} + +static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); + int ret; + + ret = clk_enable(pc->clk); + if (ret) + return ret; + + pc->data->set_enable(chip, pwm, true); + + return 0; +} + +static void rockchip_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); + + pc->data->set_enable(chip, pwm, false); + + clk_disable(pc->clk); +} + +static const struct pwm_ops rockchip_pwm_ops_v1 = { + .config = rockchip_pwm_config, + .enable = rockchip_pwm_enable, + .disable = rockchip_pwm_disable, + .owner = THIS_MODULE, +}; + +static const struct pwm_ops rockchip_pwm_ops_v2 = { + .config = rockchip_pwm_config, + .set_polarity = rockchip_pwm_set_polarity, + .enable = rockchip_pwm_enable, + .disable = rockchip_pwm_disable, + .owner = THIS_MODULE, +}; + +static const struct rockchip_pwm_data pwm_data_v1 = { + .regs = { + .duty = 0x04, + .period = 0x08, + .cntr = 0x00, + .ctrl = 0x0c, + }, + .prescaler = 2, + .ops = &rockchip_pwm_ops_v1, + .set_enable = rockchip_pwm_set_enable_v1, +}; + +static const struct rockchip_pwm_data pwm_data_v2 = { + .regs = { + .duty = 0x08, + .period = 0x04, + .cntr = 0x00, + .ctrl = 0x0c, + }, + .prescaler = 1, + .ops = &rockchip_pwm_ops_v2, + .set_enable = rockchip_pwm_set_enable_v2, +}; + +static const struct rockchip_pwm_data pwm_data_vop = { + .regs = { + .duty = 0x08, + .period = 0x04, + .cntr = 0x0c, + .ctrl = 0x00, + }, + .prescaler = 1, + .ops = &rockchip_pwm_ops_v2, + .set_enable = rockchip_pwm_set_enable_v2, +}; + +static const struct of_device_id rockchip_pwm_dt_ids[] = { + { .compatible = "rockchip,rk2928-pwm", .data = &pwm_data_v1}, + { .compatible = "rockchip,rk3288-pwm", .data = &pwm_data_v2}, + { .compatible = "rockchip,vop-pwm", .data = &pwm_data_vop}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rockchip_pwm_dt_ids); + +static int rockchip_pwm_probe(struct platform_device *pdev) +{ + const struct of_device_id *id; + struct rockchip_pwm_chip *pc; + struct resource *r; + int ret; + + id = of_match_device(rockchip_pwm_dt_ids, &pdev->dev); + if (!id) + return -EINVAL; + + pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); + if (!pc) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pc->base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(pc->base)) + return PTR_ERR(pc->base); + + pc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pc->clk)) + return PTR_ERR(pc->clk); + + ret = clk_prepare(pc->clk); + if (ret) + return ret; + + platform_set_drvdata(pdev, pc); + + pc->data = id->data; + pc->chip.dev = &pdev->dev; + pc->chip.ops = pc->data->ops; + pc->chip.base = -1; + pc->chip.npwm = 1; + + if (pc->data->ops->set_polarity) { + pc->chip.of_xlate = of_pwm_xlate_with_flags; + pc->chip.of_pwm_n_cells = 3; + } + + ret = pwmchip_add(&pc->chip); + if (ret < 0) { + clk_unprepare(pc->clk); + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + } + + return ret; +} + +static int rockchip_pwm_remove(struct platform_device *pdev) +{ + struct rockchip_pwm_chip *pc = platform_get_drvdata(pdev); + + clk_unprepare(pc->clk); + + return pwmchip_remove(&pc->chip); +} + +static struct platform_driver rockchip_pwm_driver = { + .driver = { + .name = "rockchip-pwm", + .of_match_table = rockchip_pwm_dt_ids, + }, + .probe = rockchip_pwm_probe, + .remove = rockchip_pwm_remove, +}; +module_platform_driver(rockchip_pwm_driver); + +MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>"); +MODULE_DESCRIPTION("Rockchip SoC PWM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c new file mode 100644 index 000000000..ff201e1b9 --- /dev/null +++ b/drivers/pwm/pwm-samsung.c @@ -0,0 +1,644 @@ +/* + * Copyright (c) 2007 Ben Dooks + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * PWM driver for Samsung SoCs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/export.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/time.h> + +/* For struct samsung_timer_variant and samsung_pwm_lock. */ +#include <clocksource/samsung_pwm.h> + +#define REG_TCFG0 0x00 +#define REG_TCFG1 0x04 +#define REG_TCON 0x08 + +#define REG_TCNTB(chan) (0x0c + ((chan) * 0xc)) +#define REG_TCMPB(chan) (0x10 + ((chan) * 0xc)) + +#define TCFG0_PRESCALER_MASK 0xff +#define TCFG0_PRESCALER1_SHIFT 8 + +#define TCFG1_MUX_MASK 0xf +#define TCFG1_SHIFT(chan) (4 * (chan)) + +/* + * Each channel occupies 4 bits in TCON register, but there is a gap of 4 + * bits (one channel) after channel 0, so channels have different numbering + * when accessing TCON register. See to_tcon_channel() function. + * + * In addition, the location of autoreload bit for channel 4 (TCON channel 5) + * in its set of bits is 2 as opposed to 3 for other channels. + */ +#define TCON_START(chan) BIT(4 * (chan) + 0) +#define TCON_MANUALUPDATE(chan) BIT(4 * (chan) + 1) +#define TCON_INVERT(chan) BIT(4 * (chan) + 2) +#define _TCON_AUTORELOAD(chan) BIT(4 * (chan) + 3) +#define _TCON_AUTORELOAD4(chan) BIT(4 * (chan) + 2) +#define TCON_AUTORELOAD(chan) \ + ((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan)) + +/** + * struct samsung_pwm_channel - private data of PWM channel + * @period_ns: current period in nanoseconds programmed to the hardware + * @duty_ns: current duty time in nanoseconds programmed to the hardware + * @tin_ns: time of one timer tick in nanoseconds with current timer rate + */ +struct samsung_pwm_channel { + u32 period_ns; + u32 duty_ns; + u32 tin_ns; +}; + +/** + * struct samsung_pwm_chip - private data of PWM chip + * @chip: generic PWM chip + * @variant: local copy of hardware variant data + * @inverter_mask: inverter status for all channels - one bit per channel + * @base: base address of mapped PWM registers + * @base_clk: base clock used to drive the timers + * @tclk0: external clock 0 (can be ERR_PTR if not present) + * @tclk1: external clock 1 (can be ERR_PTR if not present) + */ +struct samsung_pwm_chip { + struct pwm_chip chip; + struct samsung_pwm_variant variant; + u8 inverter_mask; + + void __iomem *base; + struct clk *base_clk; + struct clk *tclk0; + struct clk *tclk1; +}; + +#ifndef CONFIG_CLKSRC_SAMSUNG_PWM +/* + * PWM block is shared between pwm-samsung and samsung_pwm_timer drivers + * and some registers need access synchronization. If both drivers are + * compiled in, the spinlock is defined in the clocksource driver, + * otherwise following definition is used. + * + * Currently we do not need any more complex synchronization method + * because all the supported SoCs contain only one instance of the PWM + * IP. Should this change, both drivers will need to be modified to + * properly synchronize accesses to particular instances. + */ +static DEFINE_SPINLOCK(samsung_pwm_lock); +#endif + +static inline +struct samsung_pwm_chip *to_samsung_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct samsung_pwm_chip, chip); +} + +static inline unsigned int to_tcon_channel(unsigned int channel) +{ + /* TCON register has a gap of 4 bits (1 channel) after channel 0 */ + return (channel == 0) ? 0 : (channel + 1); +} + +static void pwm_samsung_set_divisor(struct samsung_pwm_chip *pwm, + unsigned int channel, u8 divisor) +{ + u8 shift = TCFG1_SHIFT(channel); + unsigned long flags; + u32 reg; + u8 bits; + + bits = (fls(divisor) - 1) - pwm->variant.div_base; + + spin_lock_irqsave(&samsung_pwm_lock, flags); + + reg = readl(pwm->base + REG_TCFG1); + reg &= ~(TCFG1_MUX_MASK << shift); + reg |= bits << shift; + writel(reg, pwm->base + REG_TCFG1); + + spin_unlock_irqrestore(&samsung_pwm_lock, flags); +} + +static int pwm_samsung_is_tdiv(struct samsung_pwm_chip *chip, unsigned int chan) +{ + struct samsung_pwm_variant *variant = &chip->variant; + u32 reg; + + reg = readl(chip->base + REG_TCFG1); + reg >>= TCFG1_SHIFT(chan); + reg &= TCFG1_MUX_MASK; + + return (BIT(reg) & variant->tclk_mask) == 0; +} + +static unsigned long pwm_samsung_get_tin_rate(struct samsung_pwm_chip *chip, + unsigned int chan) +{ + unsigned long rate; + u32 reg; + + rate = clk_get_rate(chip->base_clk); + + reg = readl(chip->base + REG_TCFG0); + if (chan >= 2) + reg >>= TCFG0_PRESCALER1_SHIFT; + reg &= TCFG0_PRESCALER_MASK; + + return rate / (reg + 1); +} + +static unsigned long pwm_samsung_calc_tin(struct samsung_pwm_chip *chip, + unsigned int chan, unsigned long freq) +{ + struct samsung_pwm_variant *variant = &chip->variant; + unsigned long rate; + struct clk *clk; + u8 div; + + if (!pwm_samsung_is_tdiv(chip, chan)) { + clk = (chan < 2) ? chip->tclk0 : chip->tclk1; + if (!IS_ERR(clk)) { + rate = clk_get_rate(clk); + if (rate) + return rate; + } + + dev_warn(chip->chip.dev, + "tclk of PWM %d is inoperational, using tdiv\n", chan); + } + + rate = pwm_samsung_get_tin_rate(chip, chan); + dev_dbg(chip->chip.dev, "tin parent at %lu\n", rate); + + /* + * Compare minimum PWM frequency that can be achieved with possible + * divider settings and choose the lowest divisor that can generate + * frequencies lower than requested. + */ + for (div = variant->div_base; div < 4; ++div) + if ((rate >> (variant->bits + div)) < freq) + break; + + pwm_samsung_set_divisor(chip, chan, BIT(div)); + + return rate >> div; +} + +static int pwm_samsung_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); + struct samsung_pwm_channel *our_chan; + + if (!(our_chip->variant.output_mask & BIT(pwm->hwpwm))) { + dev_warn(chip->dev, + "tried to request PWM channel %d without output\n", + pwm->hwpwm); + return -EINVAL; + } + + our_chan = devm_kzalloc(chip->dev, sizeof(*our_chan), GFP_KERNEL); + if (!our_chan) + return -ENOMEM; + + pwm_set_chip_data(pwm, our_chan); + + return 0; +} + +static void pwm_samsung_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + devm_kfree(chip->dev, pwm_get_chip_data(pwm)); + pwm_set_chip_data(pwm, NULL); +} + +static int pwm_samsung_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); + unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm); + unsigned long flags; + u32 tcon; + + spin_lock_irqsave(&samsung_pwm_lock, flags); + + tcon = readl(our_chip->base + REG_TCON); + + tcon &= ~TCON_START(tcon_chan); + tcon |= TCON_MANUALUPDATE(tcon_chan); + writel(tcon, our_chip->base + REG_TCON); + + tcon &= ~TCON_MANUALUPDATE(tcon_chan); + tcon |= TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan); + writel(tcon, our_chip->base + REG_TCON); + + spin_unlock_irqrestore(&samsung_pwm_lock, flags); + + return 0; +} + +static void pwm_samsung_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); + unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm); + unsigned long flags; + u32 tcon; + + spin_lock_irqsave(&samsung_pwm_lock, flags); + + tcon = readl(our_chip->base + REG_TCON); + tcon &= ~TCON_AUTORELOAD(tcon_chan); + writel(tcon, our_chip->base + REG_TCON); + + spin_unlock_irqrestore(&samsung_pwm_lock, flags); +} + +static void pwm_samsung_manual_update(struct samsung_pwm_chip *chip, + struct pwm_device *pwm) +{ + unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm); + u32 tcon; + unsigned long flags; + + spin_lock_irqsave(&samsung_pwm_lock, flags); + + tcon = readl(chip->base + REG_TCON); + tcon |= TCON_MANUALUPDATE(tcon_chan); + writel(tcon, chip->base + REG_TCON); + + tcon &= ~TCON_MANUALUPDATE(tcon_chan); + writel(tcon, chip->base + REG_TCON); + + spin_unlock_irqrestore(&samsung_pwm_lock, flags); +} + +static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); + struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm); + u32 tin_ns = chan->tin_ns, tcnt, tcmp, oldtcmp; + + /* + * We currently avoid using 64bit arithmetic by using the + * fact that anything faster than 1Hz is easily representable + * by 32bits. + */ + if (period_ns > NSEC_PER_SEC) + return -ERANGE; + + if (period_ns == chan->period_ns && duty_ns == chan->duty_ns) + return 0; + + tcnt = readl(our_chip->base + REG_TCNTB(pwm->hwpwm)); + oldtcmp = readl(our_chip->base + REG_TCMPB(pwm->hwpwm)); + + /* We need tick count for calculation, not last tick. */ + ++tcnt; + + /* Check to see if we are changing the clock rate of the PWM. */ + if (chan->period_ns != period_ns) { + unsigned long tin_rate; + u32 period; + + period = NSEC_PER_SEC / period_ns; + + dev_dbg(our_chip->chip.dev, "duty_ns=%d, period_ns=%d (%u)\n", + duty_ns, period_ns, period); + + tin_rate = pwm_samsung_calc_tin(our_chip, pwm->hwpwm, period); + + dev_dbg(our_chip->chip.dev, "tin_rate=%lu\n", tin_rate); + + tin_ns = NSEC_PER_SEC / tin_rate; + tcnt = period_ns / tin_ns; + } + + /* Period is too short. */ + if (tcnt <= 1) + return -ERANGE; + + /* Note that counters count down. */ + tcmp = duty_ns / tin_ns; + + /* 0% duty is not available */ + if (!tcmp) + ++tcmp; + + tcmp = tcnt - tcmp; + + /* Decrement to get tick numbers, instead of tick counts. */ + --tcnt; + /* -1UL will give 100% duty. */ + --tcmp; + + dev_dbg(our_chip->chip.dev, + "tin_ns=%u, tcmp=%u/%u\n", tin_ns, tcmp, tcnt); + + /* Update PWM registers. */ + writel(tcnt, our_chip->base + REG_TCNTB(pwm->hwpwm)); + writel(tcmp, our_chip->base + REG_TCMPB(pwm->hwpwm)); + + /* + * In case the PWM is currently at 100% duty cycle, force a manual + * update to prevent the signal staying high if the PWM is disabled + * shortly afer this update (before it autoreloaded the new values). + */ + if (oldtcmp == (u32) -1) { + dev_dbg(our_chip->chip.dev, "Forcing manual update"); + pwm_samsung_manual_update(our_chip, pwm); + } + + chan->period_ns = period_ns; + chan->tin_ns = tin_ns; + chan->duty_ns = duty_ns; + + return 0; +} + +static void pwm_samsung_set_invert(struct samsung_pwm_chip *chip, + unsigned int channel, bool invert) +{ + unsigned int tcon_chan = to_tcon_channel(channel); + unsigned long flags; + u32 tcon; + + spin_lock_irqsave(&samsung_pwm_lock, flags); + + tcon = readl(chip->base + REG_TCON); + + if (invert) { + chip->inverter_mask |= BIT(channel); + tcon |= TCON_INVERT(tcon_chan); + } else { + chip->inverter_mask &= ~BIT(channel); + tcon &= ~TCON_INVERT(tcon_chan); + } + + writel(tcon, chip->base + REG_TCON); + + spin_unlock_irqrestore(&samsung_pwm_lock, flags); +} + +static int pwm_samsung_set_polarity(struct pwm_chip *chip, + struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); + bool invert = (polarity == PWM_POLARITY_NORMAL); + + /* Inverted means normal in the hardware. */ + pwm_samsung_set_invert(our_chip, pwm->hwpwm, invert); + + return 0; +} + +static const struct pwm_ops pwm_samsung_ops = { + .request = pwm_samsung_request, + .free = pwm_samsung_free, + .enable = pwm_samsung_enable, + .disable = pwm_samsung_disable, + .config = pwm_samsung_config, + .set_polarity = pwm_samsung_set_polarity, + .owner = THIS_MODULE, +}; + +#ifdef CONFIG_OF +static const struct samsung_pwm_variant s3c24xx_variant = { + .bits = 16, + .div_base = 1, + .has_tint_cstat = false, + .tclk_mask = BIT(4), +}; + +static const struct samsung_pwm_variant s3c64xx_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = BIT(7) | BIT(6) | BIT(5), +}; + +static const struct samsung_pwm_variant s5p64x0_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = 0, +}; + +static const struct samsung_pwm_variant s5pc100_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = BIT(5), +}; + +static const struct of_device_id samsung_pwm_matches[] = { + { .compatible = "samsung,s3c2410-pwm", .data = &s3c24xx_variant }, + { .compatible = "samsung,s3c6400-pwm", .data = &s3c64xx_variant }, + { .compatible = "samsung,s5p6440-pwm", .data = &s5p64x0_variant }, + { .compatible = "samsung,s5pc100-pwm", .data = &s5pc100_variant }, + { .compatible = "samsung,exynos4210-pwm", .data = &s5p64x0_variant }, + {}, +}; + +static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip) +{ + struct device_node *np = chip->chip.dev->of_node; + const struct of_device_id *match; + struct property *prop; + const __be32 *cur; + u32 val; + + match = of_match_node(samsung_pwm_matches, np); + if (!match) + return -ENODEV; + + memcpy(&chip->variant, match->data, sizeof(chip->variant)); + + of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) { + if (val >= SAMSUNG_PWM_NUM) { + dev_err(chip->chip.dev, + "%s: invalid channel index in samsung,pwm-outputs property\n", + __func__); + continue; + } + chip->variant.output_mask |= BIT(val); + } + + return 0; +} +#else +static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip) +{ + return -ENODEV; +} +#endif + +static int pwm_samsung_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct samsung_pwm_chip *chip; + struct resource *res; + unsigned int chan; + int ret; + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (chip == NULL) + return -ENOMEM; + + chip->chip.dev = &pdev->dev; + chip->chip.ops = &pwm_samsung_ops; + chip->chip.base = -1; + chip->chip.npwm = SAMSUNG_PWM_NUM; + chip->inverter_mask = BIT(SAMSUNG_PWM_NUM) - 1; + + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) { + ret = pwm_samsung_parse_dt(chip); + if (ret) + return ret; + + chip->chip.of_xlate = of_pwm_xlate_with_flags; + chip->chip.of_pwm_n_cells = 3; + } else { + if (!pdev->dev.platform_data) { + dev_err(&pdev->dev, "no platform data specified\n"); + return -EINVAL; + } + + memcpy(&chip->variant, pdev->dev.platform_data, + sizeof(chip->variant)); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + chip->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(chip->base)) + return PTR_ERR(chip->base); + + chip->base_clk = devm_clk_get(&pdev->dev, "timers"); + if (IS_ERR(chip->base_clk)) { + dev_err(dev, "failed to get timer base clk\n"); + return PTR_ERR(chip->base_clk); + } + + ret = clk_prepare_enable(chip->base_clk); + if (ret < 0) { + dev_err(dev, "failed to enable base clock\n"); + return ret; + } + + for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan) + if (chip->variant.output_mask & BIT(chan)) + pwm_samsung_set_invert(chip, chan, true); + + /* Following clocks are optional. */ + chip->tclk0 = devm_clk_get(&pdev->dev, "pwm-tclk0"); + chip->tclk1 = devm_clk_get(&pdev->dev, "pwm-tclk1"); + + platform_set_drvdata(pdev, chip); + + ret = pwmchip_add(&chip->chip); + if (ret < 0) { + dev_err(dev, "failed to register PWM chip\n"); + clk_disable_unprepare(chip->base_clk); + return ret; + } + + dev_dbg(dev, "base_clk at %lu, tclk0 at %lu, tclk1 at %lu\n", + clk_get_rate(chip->base_clk), + !IS_ERR(chip->tclk0) ? clk_get_rate(chip->tclk0) : 0, + !IS_ERR(chip->tclk1) ? clk_get_rate(chip->tclk1) : 0); + + return 0; +} + +static int pwm_samsung_remove(struct platform_device *pdev) +{ + struct samsung_pwm_chip *chip = platform_get_drvdata(pdev); + int ret; + + ret = pwmchip_remove(&chip->chip); + if (ret < 0) + return ret; + + clk_disable_unprepare(chip->base_clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pwm_samsung_suspend(struct device *dev) +{ + struct samsung_pwm_chip *chip = dev_get_drvdata(dev); + unsigned int i; + + /* + * No one preserves these values during suspend so reset them. + * Otherwise driver leaves PWM unconfigured if same values are + * passed to pwm_config() next time. + */ + for (i = 0; i < SAMSUNG_PWM_NUM; ++i) { + struct pwm_device *pwm = &chip->chip.pwms[i]; + struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm); + + if (!chan) + continue; + + chan->period_ns = 0; + chan->duty_ns = 0; + } + + return 0; +} + +static int pwm_samsung_resume(struct device *dev) +{ + struct samsung_pwm_chip *chip = dev_get_drvdata(dev); + unsigned int chan; + + /* + * Inverter setting must be preserved across suspend/resume + * as nobody really seems to configure it more than once. + */ + for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan) { + if (chip->variant.output_mask & BIT(chan)) + pwm_samsung_set_invert(chip, chan, + chip->inverter_mask & BIT(chan)); + } + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pwm_samsung_pm_ops, pwm_samsung_suspend, + pwm_samsung_resume); + +static struct platform_driver pwm_samsung_driver = { + .driver = { + .name = "samsung-pwm", + .pm = &pwm_samsung_pm_ops, + .of_match_table = of_match_ptr(samsung_pwm_matches), + }, + .probe = pwm_samsung_probe, + .remove = pwm_samsung_remove, +}; +module_platform_driver(pwm_samsung_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>"); +MODULE_ALIAS("platform:samsung-pwm"); diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c new file mode 100644 index 000000000..6c6b44fd3 --- /dev/null +++ b/drivers/pwm/pwm-spear.c @@ -0,0 +1,266 @@ +/* + * ST Microelectronics SPEAr Pulse Width Modulator driver + * + * Copyright (C) 2012 ST Microelectronics + * Shiraz Hashim <shiraz.linux.kernel@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> +#include <linux/types.h> + +#define NUM_PWM 4 + +/* PWM registers and bits definitions */ +#define PWMCR 0x00 /* Control Register */ +#define PWMCR_PWM_ENABLE 0x1 +#define PWMCR_PRESCALE_SHIFT 2 +#define PWMCR_MIN_PRESCALE 0x00 +#define PWMCR_MAX_PRESCALE 0x3FFF + +#define PWMDCR 0x04 /* Duty Cycle Register */ +#define PWMDCR_MIN_DUTY 0x0001 +#define PWMDCR_MAX_DUTY 0xFFFF + +#define PWMPCR 0x08 /* Period Register */ +#define PWMPCR_MIN_PERIOD 0x0001 +#define PWMPCR_MAX_PERIOD 0xFFFF + +/* Following only available on 13xx SoCs */ +#define PWMMCR 0x3C /* Master Control Register */ +#define PWMMCR_PWM_ENABLE 0x1 + +/** + * struct spear_pwm_chip - struct representing pwm chip + * + * @mmio_base: base address of pwm chip + * @clk: pointer to clk structure of pwm chip + * @chip: linux pwm chip representation + */ +struct spear_pwm_chip { + void __iomem *mmio_base; + struct clk *clk; + struct pwm_chip chip; +}; + +static inline struct spear_pwm_chip *to_spear_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct spear_pwm_chip, chip); +} + +static inline u32 spear_pwm_readl(struct spear_pwm_chip *chip, unsigned int num, + unsigned long offset) +{ + return readl_relaxed(chip->mmio_base + (num << 4) + offset); +} + +static inline void spear_pwm_writel(struct spear_pwm_chip *chip, + unsigned int num, unsigned long offset, + unsigned long val) +{ + writel_relaxed(val, chip->mmio_base + (num << 4) + offset); +} + +static int spear_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct spear_pwm_chip *pc = to_spear_pwm_chip(chip); + u64 val, div, clk_rate; + unsigned long prescale = PWMCR_MIN_PRESCALE, pv, dc; + int ret; + + /* + * Find pv, dc and prescale to suit duty_ns and period_ns. This is done + * according to formulas described below: + * + * period_ns = 10^9 * (PRESCALE + 1) * PV / PWM_CLK_RATE + * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE + * + * PV = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1)) + * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1)) + */ + clk_rate = clk_get_rate(pc->clk); + while (1) { + div = 1000000000; + div *= 1 + prescale; + val = clk_rate * period_ns; + pv = div64_u64(val, div); + val = clk_rate * duty_ns; + dc = div64_u64(val, div); + + /* if duty_ns and period_ns are not achievable then return */ + if (pv < PWMPCR_MIN_PERIOD || dc < PWMDCR_MIN_DUTY) + return -EINVAL; + + /* + * if pv and dc have crossed their upper limit, then increase + * prescale and recalculate pv and dc. + */ + if (pv > PWMPCR_MAX_PERIOD || dc > PWMDCR_MAX_DUTY) { + if (++prescale > PWMCR_MAX_PRESCALE) + return -EINVAL; + continue; + } + break; + } + + /* + * NOTE: the clock to PWM has to be enabled first before writing to the + * registers. + */ + ret = clk_enable(pc->clk); + if (ret) + return ret; + + spear_pwm_writel(pc, pwm->hwpwm, PWMCR, + prescale << PWMCR_PRESCALE_SHIFT); + spear_pwm_writel(pc, pwm->hwpwm, PWMDCR, dc); + spear_pwm_writel(pc, pwm->hwpwm, PWMPCR, pv); + clk_disable(pc->clk); + + return 0; +} + +static int spear_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct spear_pwm_chip *pc = to_spear_pwm_chip(chip); + int rc = 0; + u32 val; + + rc = clk_enable(pc->clk); + if (rc) + return rc; + + val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR); + val |= PWMCR_PWM_ENABLE; + spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val); + + return 0; +} + +static void spear_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct spear_pwm_chip *pc = to_spear_pwm_chip(chip); + u32 val; + + val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR); + val &= ~PWMCR_PWM_ENABLE; + spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val); + + clk_disable(pc->clk); +} + +static const struct pwm_ops spear_pwm_ops = { + .config = spear_pwm_config, + .enable = spear_pwm_enable, + .disable = spear_pwm_disable, + .owner = THIS_MODULE, +}; + +static int spear_pwm_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct spear_pwm_chip *pc; + struct resource *r; + int ret; + u32 val; + + pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); + if (!pc) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(pc->mmio_base)) + return PTR_ERR(pc->mmio_base); + + pc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pc->clk)) + return PTR_ERR(pc->clk); + + platform_set_drvdata(pdev, pc); + + pc->chip.dev = &pdev->dev; + pc->chip.ops = &spear_pwm_ops; + pc->chip.base = -1; + pc->chip.npwm = NUM_PWM; + + ret = clk_prepare(pc->clk); + if (ret) + return ret; + + if (of_device_is_compatible(np, "st,spear1340-pwm")) { + ret = clk_enable(pc->clk); + if (ret) { + clk_unprepare(pc->clk); + return ret; + } + /* + * Following enables PWM chip, channels would still be + * enabled individually through their control register + */ + val = readl_relaxed(pc->mmio_base + PWMMCR); + val |= PWMMCR_PWM_ENABLE; + writel_relaxed(val, pc->mmio_base + PWMMCR); + + clk_disable(pc->clk); + } + + ret = pwmchip_add(&pc->chip); + if (ret < 0) { + clk_unprepare(pc->clk); + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + } + + return ret; +} + +static int spear_pwm_remove(struct platform_device *pdev) +{ + struct spear_pwm_chip *pc = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < NUM_PWM; i++) + pwm_disable(&pc->chip.pwms[i]); + + /* clk was prepared in probe, hence unprepare it here */ + clk_unprepare(pc->clk); + return pwmchip_remove(&pc->chip); +} + +static const struct of_device_id spear_pwm_of_match[] = { + { .compatible = "st,spear320-pwm" }, + { .compatible = "st,spear1340-pwm" }, + { } +}; + +MODULE_DEVICE_TABLE(of, spear_pwm_of_match); + +static struct platform_driver spear_pwm_driver = { + .driver = { + .name = "spear-pwm", + .of_match_table = spear_pwm_of_match, + }, + .probe = spear_pwm_probe, + .remove = spear_pwm_remove, +}; + +module_platform_driver(spear_pwm_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>"); +MODULE_ALIAS("platform:spear-pwm"); diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c new file mode 100644 index 000000000..92abbd56b --- /dev/null +++ b/drivers/pwm/pwm-sti.c @@ -0,0 +1,410 @@ +/* + * PWM device driver for ST SoCs. + * Author: Ajit Pal Singh <ajitpal.singh@st.com> + * + * Copyright (C) 2013-2014 STMicroelectronics (R&D) Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/math64.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/time.h> + +#define STI_DS_REG(ch) (4 * (ch)) /* Channel's Duty Cycle register */ +#define STI_PWMCR 0x50 /* Control/Config register */ +#define STI_INTEN 0x54 /* Interrupt Enable/Disable register */ +#define PWM_PRESCALE_LOW_MASK 0x0f +#define PWM_PRESCALE_HIGH_MASK 0xf0 + +/* Regfield IDs */ +enum { + PWMCLK_PRESCALE_LOW, + PWMCLK_PRESCALE_HIGH, + PWM_EN, + PWM_INT_EN, + + /* Keep last */ + MAX_REGFIELDS +}; + +struct sti_pwm_compat_data { + const struct reg_field *reg_fields; + unsigned int num_chan; + unsigned int max_pwm_cnt; + unsigned int max_prescale; +}; + +struct sti_pwm_chip { + struct device *dev; + struct clk *clk; + unsigned long clk_rate; + struct regmap *regmap; + struct sti_pwm_compat_data *cdata; + struct regmap_field *prescale_low; + struct regmap_field *prescale_high; + struct regmap_field *pwm_en; + struct regmap_field *pwm_int_en; + struct pwm_chip chip; + struct pwm_device *cur; + unsigned long configured; + unsigned int en_count; + struct mutex sti_pwm_lock; /* To sync between enable/disable calls */ + void __iomem *mmio; +}; + +static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = { + [PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWMCR, 0, 3), + [PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWMCR, 11, 14), + [PWM_EN] = REG_FIELD(STI_PWMCR, 9, 9), + [PWM_INT_EN] = REG_FIELD(STI_INTEN, 0, 0), +}; + +static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip) +{ + return container_of(chip, struct sti_pwm_chip, chip); +} + +/* + * Calculate the prescaler value corresponding to the period. + */ +static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period, + unsigned int *prescale) +{ + struct sti_pwm_compat_data *cdata = pc->cdata; + unsigned long val; + unsigned int ps; + + /* + * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_count + 1)) - 1 + */ + val = NSEC_PER_SEC / pc->clk_rate; + val *= cdata->max_pwm_cnt + 1; + + if (period % val) { + return -EINVAL; + } else { + ps = period / val - 1; + if (ps > cdata->max_prescale) + return -EINVAL; + } + *prescale = ps; + + return 0; +} + +/* + * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles. + * The only way to change the period (apart from changing the PWM input clock) + * is to change the PWM clock prescaler. + * The prescaler is of 8 bits, so 256 prescaler values and hence + * 256 possible period values are supported (for a particular clock rate). + * The requested period will be applied only if it matches one of these + * 256 values. + */ +static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + struct sti_pwm_compat_data *cdata = pc->cdata; + struct pwm_device *cur = pc->cur; + struct device *dev = pc->dev; + unsigned int prescale = 0, pwmvalx; + int ret; + unsigned int ncfg; + bool period_same = false; + + ncfg = hweight_long(pc->configured); + if (ncfg) + period_same = (period_ns == pwm_get_period(cur)); + + /* Allow configuration changes if one of the + * following conditions satisfy. + * 1. No channels have been configured. + * 2. Only one channel has been configured and the new request + * is for the same channel. + * 3. Only one channel has been configured and the new request is + * for a new channel and period of the new channel is same as + * the current configured period. + * 4. More than one channels are configured and period of the new + * requestis the same as the current period. + */ + if (!ncfg || + ((ncfg == 1) && (pwm->hwpwm == cur->hwpwm)) || + ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) || + ((ncfg > 1) && period_same)) { + /* Enable clock before writing to PWM registers. */ + ret = clk_enable(pc->clk); + if (ret) + return ret; + + if (!period_same) { + ret = sti_pwm_get_prescale(pc, period_ns, &prescale); + if (ret) + goto clk_dis; + + ret = + regmap_field_write(pc->prescale_low, + prescale & PWM_PRESCALE_LOW_MASK); + if (ret) + goto clk_dis; + + ret = + regmap_field_write(pc->prescale_high, + (prescale & PWM_PRESCALE_HIGH_MASK) >> 4); + if (ret) + goto clk_dis; + } + + /* + * When PWMVal == 0, PWM pulse = 1 local clock cycle. + * When PWMVal == max_pwm_count, + * PWM pulse = (max_pwm_count + 1) local cycles, + * that is continuous pulse: signal never goes low. + */ + pwmvalx = cdata->max_pwm_cnt * duty_ns / period_ns; + + ret = regmap_write(pc->regmap, STI_DS_REG(pwm->hwpwm), pwmvalx); + if (ret) + goto clk_dis; + + ret = regmap_field_write(pc->pwm_int_en, 0); + + set_bit(pwm->hwpwm, &pc->configured); + pc->cur = pwm; + + dev_dbg(dev, "prescale:%u, period:%i, duty:%i, pwmvalx:%u\n", + prescale, period_ns, duty_ns, pwmvalx); + } else { + return -EINVAL; + } + +clk_dis: + clk_disable(pc->clk); + return ret; +} + +static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + struct device *dev = pc->dev; + int ret = 0; + + /* + * Since we have a common enable for all PWM channels, + * do not enable if already enabled. + */ + mutex_lock(&pc->sti_pwm_lock); + if (!pc->en_count) { + ret = clk_enable(pc->clk); + if (ret) + goto out; + + ret = regmap_field_write(pc->pwm_en, 1); + if (ret) { + dev_err(dev, "failed to enable PWM device:%d\n", + pwm->hwpwm); + goto out; + } + } + pc->en_count++; +out: + mutex_unlock(&pc->sti_pwm_lock); + return ret; +} + +static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + + mutex_lock(&pc->sti_pwm_lock); + if (--pc->en_count) { + mutex_unlock(&pc->sti_pwm_lock); + return; + } + regmap_field_write(pc->pwm_en, 0); + + clk_disable(pc->clk); + mutex_unlock(&pc->sti_pwm_lock); +} + +static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + + clear_bit(pwm->hwpwm, &pc->configured); +} + +static const struct pwm_ops sti_pwm_ops = { + .config = sti_pwm_config, + .enable = sti_pwm_enable, + .disable = sti_pwm_disable, + .free = sti_pwm_free, + .owner = THIS_MODULE, +}; + +static int sti_pwm_probe_dt(struct sti_pwm_chip *pc) +{ + struct device *dev = pc->dev; + const struct reg_field *reg_fields; + struct device_node *np = dev->of_node; + struct sti_pwm_compat_data *cdata = pc->cdata; + u32 num_chan; + + of_property_read_u32(np, "st,pwm-num-chan", &num_chan); + if (num_chan) + cdata->num_chan = num_chan; + + reg_fields = cdata->reg_fields; + + pc->prescale_low = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWMCLK_PRESCALE_LOW]); + if (IS_ERR(pc->prescale_low)) + return PTR_ERR(pc->prescale_low); + + pc->prescale_high = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWMCLK_PRESCALE_HIGH]); + if (IS_ERR(pc->prescale_high)) + return PTR_ERR(pc->prescale_high); + + pc->pwm_en = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWM_EN]); + if (IS_ERR(pc->pwm_en)) + return PTR_ERR(pc->pwm_en); + + pc->pwm_int_en = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWM_INT_EN]); + if (IS_ERR(pc->pwm_int_en)) + return PTR_ERR(pc->pwm_int_en); + + return 0; +} + +static const struct regmap_config sti_pwm_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int sti_pwm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sti_pwm_compat_data *cdata; + struct sti_pwm_chip *pc; + struct resource *res; + int ret; + + pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); + if (!pc) + return -ENOMEM; + + cdata = devm_kzalloc(dev, sizeof(*cdata), GFP_KERNEL); + if (!cdata) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + pc->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(pc->mmio)) + return PTR_ERR(pc->mmio); + + pc->regmap = devm_regmap_init_mmio(dev, pc->mmio, + &sti_pwm_regmap_config); + if (IS_ERR(pc->regmap)) + return PTR_ERR(pc->regmap); + + /* + * Setup PWM data with default values: some values could be replaced + * with specific ones provided from Device Tree. + */ + cdata->reg_fields = &sti_pwm_regfields[0]; + cdata->max_prescale = 0xff; + cdata->max_pwm_cnt = 255; + cdata->num_chan = 1; + + pc->cdata = cdata; + pc->dev = dev; + pc->en_count = 0; + mutex_init(&pc->sti_pwm_lock); + + ret = sti_pwm_probe_dt(pc); + if (ret) + return ret; + + pc->clk = of_clk_get_by_name(dev->of_node, "pwm"); + if (IS_ERR(pc->clk)) { + dev_err(dev, "failed to get PWM clock\n"); + return PTR_ERR(pc->clk); + } + + pc->clk_rate = clk_get_rate(pc->clk); + if (!pc->clk_rate) { + dev_err(dev, "failed to get clock rate\n"); + return -EINVAL; + } + + ret = clk_prepare(pc->clk); + if (ret) { + dev_err(dev, "failed to prepare clock\n"); + return ret; + } + + pc->chip.dev = dev; + pc->chip.ops = &sti_pwm_ops; + pc->chip.base = -1; + pc->chip.npwm = pc->cdata->num_chan; + pc->chip.can_sleep = true; + + ret = pwmchip_add(&pc->chip); + if (ret < 0) { + clk_unprepare(pc->clk); + return ret; + } + + platform_set_drvdata(pdev, pc); + + return 0; +} + +static int sti_pwm_remove(struct platform_device *pdev) +{ + struct sti_pwm_chip *pc = platform_get_drvdata(pdev); + unsigned int i; + + for (i = 0; i < pc->cdata->num_chan; i++) + pwm_disable(&pc->chip.pwms[i]); + + clk_unprepare(pc->clk); + + return pwmchip_remove(&pc->chip); +} + +static const struct of_device_id sti_pwm_of_match[] = { + { .compatible = "st,sti-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sti_pwm_of_match); + +static struct platform_driver sti_pwm_driver = { + .driver = { + .name = "sti-pwm", + .of_match_table = sti_pwm_of_match, + }, + .probe = sti_pwm_probe, + .remove = sti_pwm_remove, +}; +module_platform_driver(sti_pwm_driver); + +MODULE_AUTHOR("Ajit Pal Singh <ajitpal.singh@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics ST PWM driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c new file mode 100644 index 000000000..cd9dde563 --- /dev/null +++ b/drivers/pwm/pwm-sun4i.c @@ -0,0 +1,366 @@ +/* + * Driver for Allwinner sun4i Pulse Width Modulation Controller + * + * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * Licensed under GPLv2. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/time.h> + +#define PWM_CTRL_REG 0x0 + +#define PWM_CH_PRD_BASE 0x4 +#define PWM_CH_PRD_OFFSET 0x4 +#define PWM_CH_PRD(ch) (PWM_CH_PRD_BASE + PWM_CH_PRD_OFFSET * (ch)) + +#define PWMCH_OFFSET 15 +#define PWM_PRESCAL_MASK GENMASK(3, 0) +#define PWM_PRESCAL_OFF 0 +#define PWM_EN BIT(4) +#define PWM_ACT_STATE BIT(5) +#define PWM_CLK_GATING BIT(6) +#define PWM_MODE BIT(7) +#define PWM_PULSE BIT(8) +#define PWM_BYPASS BIT(9) + +#define PWM_RDY_BASE 28 +#define PWM_RDY_OFFSET 1 +#define PWM_RDY(ch) BIT(PWM_RDY_BASE + PWM_RDY_OFFSET * (ch)) + +#define PWM_PRD(prd) (((prd) - 1) << 16) +#define PWM_PRD_MASK GENMASK(15, 0) + +#define PWM_DTY_MASK GENMASK(15, 0) + +#define BIT_CH(bit, chan) ((bit) << ((chan) * PWMCH_OFFSET)) + +static const u32 prescaler_table[] = { + 120, + 180, + 240, + 360, + 480, + 0, + 0, + 0, + 12000, + 24000, + 36000, + 48000, + 72000, + 0, + 0, + 0, /* Actually 1 but tested separately */ +}; + +struct sun4i_pwm_data { + bool has_prescaler_bypass; + bool has_rdy; +}; + +struct sun4i_pwm_chip { + struct pwm_chip chip; + struct clk *clk; + void __iomem *base; + spinlock_t ctrl_lock; + const struct sun4i_pwm_data *data; +}; + +static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct sun4i_pwm_chip, chip); +} + +static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *chip, + unsigned long offset) +{ + return readl(chip->base + offset); +} + +static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip, + u32 val, unsigned long offset) +{ + writel(val, chip->base + offset); +} + +static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); + u32 prd, dty, val, clk_gate; + u64 clk_rate, div = 0; + unsigned int prescaler = 0; + int err; + + clk_rate = clk_get_rate(sun4i_pwm->clk); + + if (sun4i_pwm->data->has_prescaler_bypass) { + /* First, test without any prescaler when available */ + prescaler = PWM_PRESCAL_MASK; + /* + * When not using any prescaler, the clock period in nanoseconds + * is not an integer so round it half up instead of + * truncating to get less surprising values. + */ + div = clk_rate * period_ns + NSEC_PER_SEC/2; + do_div(div, NSEC_PER_SEC); + if (div - 1 > PWM_PRD_MASK) + prescaler = 0; + } + + if (prescaler == 0) { + /* Go up from the first divider */ + for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) { + if (!prescaler_table[prescaler]) + continue; + div = clk_rate; + do_div(div, prescaler_table[prescaler]); + div = div * period_ns; + do_div(div, NSEC_PER_SEC); + if (div - 1 <= PWM_PRD_MASK) + break; + } + + if (div - 1 > PWM_PRD_MASK) { + dev_err(chip->dev, "period exceeds the maximum value\n"); + return -EINVAL; + } + } + + prd = div; + div *= duty_ns; + do_div(div, period_ns); + dty = div; + + err = clk_prepare_enable(sun4i_pwm->clk); + if (err) { + dev_err(chip->dev, "failed to enable PWM clock\n"); + return err; + } + + spin_lock(&sun4i_pwm->ctrl_lock); + val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); + + if (sun4i_pwm->data->has_rdy && (val & PWM_RDY(pwm->hwpwm))) { + spin_unlock(&sun4i_pwm->ctrl_lock); + clk_disable_unprepare(sun4i_pwm->clk); + return -EBUSY; + } + + clk_gate = val & BIT_CH(PWM_CLK_GATING, pwm->hwpwm); + if (clk_gate) { + val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); + sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); + } + + val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); + val &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm); + val |= BIT_CH(prescaler, pwm->hwpwm); + sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); + + val = (dty & PWM_DTY_MASK) | PWM_PRD(prd); + sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm)); + + if (clk_gate) { + val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); + val |= clk_gate; + sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); + } + + spin_unlock(&sun4i_pwm->ctrl_lock); + clk_disable_unprepare(sun4i_pwm->clk); + + return 0; +} + +static int sun4i_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); + u32 val; + int ret; + + ret = clk_prepare_enable(sun4i_pwm->clk); + if (ret) { + dev_err(chip->dev, "failed to enable PWM clock\n"); + return ret; + } + + spin_lock(&sun4i_pwm->ctrl_lock); + val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); + + if (polarity != PWM_POLARITY_NORMAL) + val &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm); + else + val |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm); + + sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); + + spin_unlock(&sun4i_pwm->ctrl_lock); + clk_disable_unprepare(sun4i_pwm->clk); + + return 0; +} + +static int sun4i_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); + u32 val; + int ret; + + ret = clk_prepare_enable(sun4i_pwm->clk); + if (ret) { + dev_err(chip->dev, "failed to enable PWM clock\n"); + return ret; + } + + spin_lock(&sun4i_pwm->ctrl_lock); + val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); + val |= BIT_CH(PWM_EN, pwm->hwpwm); + val |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm); + sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); + spin_unlock(&sun4i_pwm->ctrl_lock); + + return 0; +} + +static void sun4i_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); + u32 val; + + spin_lock(&sun4i_pwm->ctrl_lock); + val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); + val &= ~BIT_CH(PWM_EN, pwm->hwpwm); + val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); + sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); + spin_unlock(&sun4i_pwm->ctrl_lock); + + clk_disable_unprepare(sun4i_pwm->clk); +} + +static const struct pwm_ops sun4i_pwm_ops = { + .config = sun4i_pwm_config, + .set_polarity = sun4i_pwm_set_polarity, + .enable = sun4i_pwm_enable, + .disable = sun4i_pwm_disable, + .owner = THIS_MODULE, +}; + +static const struct sun4i_pwm_data sun4i_pwm_data_a10 = { + .has_prescaler_bypass = false, + .has_rdy = false, +}; + +static const struct sun4i_pwm_data sun4i_pwm_data_a20 = { + .has_prescaler_bypass = true, + .has_rdy = true, +}; + +static const struct of_device_id sun4i_pwm_dt_ids[] = { + { + .compatible = "allwinner,sun4i-a10-pwm", + .data = &sun4i_pwm_data_a10, + }, { + .compatible = "allwinner,sun7i-a20-pwm", + .data = &sun4i_pwm_data_a20, + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, sun4i_pwm_dt_ids); + +static int sun4i_pwm_probe(struct platform_device *pdev) +{ + struct sun4i_pwm_chip *pwm; + struct resource *res; + u32 val; + int i, ret; + const struct of_device_id *match; + + match = of_match_device(sun4i_pwm_dt_ids, &pdev->dev); + + pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); + if (!pwm) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pwm->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pwm->base)) + return PTR_ERR(pwm->base); + + pwm->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pwm->clk)) + return PTR_ERR(pwm->clk); + + pwm->chip.dev = &pdev->dev; + pwm->chip.ops = &sun4i_pwm_ops; + pwm->chip.base = -1; + pwm->chip.npwm = 2; + pwm->chip.can_sleep = true; + pwm->chip.of_xlate = of_pwm_xlate_with_flags; + pwm->chip.of_pwm_n_cells = 3; + pwm->data = match->data; + + spin_lock_init(&pwm->ctrl_lock); + + ret = pwmchip_add(&pwm->chip); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, pwm); + + ret = clk_prepare_enable(pwm->clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable PWM clock\n"); + goto clk_error; + } + + val = sun4i_pwm_readl(pwm, PWM_CTRL_REG); + for (i = 0; i < pwm->chip.npwm; i++) + if (!(val & BIT_CH(PWM_ACT_STATE, i))) + pwm->chip.pwms[i].polarity = PWM_POLARITY_INVERSED; + clk_disable_unprepare(pwm->clk); + + return 0; + +clk_error: + pwmchip_remove(&pwm->chip); + return ret; +} + +static int sun4i_pwm_remove(struct platform_device *pdev) +{ + struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev); + + return pwmchip_remove(&pwm->chip); +} + +static struct platform_driver sun4i_pwm_driver = { + .driver = { + .name = "sun4i-pwm", + .of_match_table = sun4i_pwm_dt_ids, + }, + .probe = sun4i_pwm_probe, + .remove = sun4i_pwm_remove, +}; +module_platform_driver(sun4i_pwm_driver); + +MODULE_ALIAS("platform:sun4i-pwm"); +MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>"); +MODULE_DESCRIPTION("Allwinner sun4i PWM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c new file mode 100644 index 000000000..cabd7d8e0 --- /dev/null +++ b/drivers/pwm/pwm-tegra.c @@ -0,0 +1,250 @@ +/* + * drivers/pwm/pwm-tegra.c + * + * Tegra pulse-width-modulation controller driver + * + * Copyright (c) 2010, NVIDIA Corporation. + * Based on arch/arm/plat-mxc/pwm.c by Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pwm.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#define PWM_ENABLE (1 << 31) +#define PWM_DUTY_WIDTH 8 +#define PWM_DUTY_SHIFT 16 +#define PWM_SCALE_WIDTH 13 +#define PWM_SCALE_SHIFT 0 + +#define NUM_PWM 4 + +struct tegra_pwm_chip { + struct pwm_chip chip; + struct device *dev; + + struct clk *clk; + + void __iomem *mmio_base; +}; + +static inline struct tegra_pwm_chip *to_tegra_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct tegra_pwm_chip, chip); +} + +static inline u32 pwm_readl(struct tegra_pwm_chip *chip, unsigned int num) +{ + return readl(chip->mmio_base + (num << 4)); +} + +static inline void pwm_writel(struct tegra_pwm_chip *chip, unsigned int num, + unsigned long val) +{ + writel(val, chip->mmio_base + (num << 4)); +} + +static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip); + unsigned long long c; + unsigned long rate, hz; + u32 val = 0; + int err; + + /* + * Convert from duty_ns / period_ns to a fixed number of duty ticks + * per (1 << PWM_DUTY_WIDTH) cycles and make sure to round to the + * nearest integer during division. + */ + c = duty_ns * ((1 << PWM_DUTY_WIDTH) - 1) + period_ns / 2; + do_div(c, period_ns); + + val = (u32)c << PWM_DUTY_SHIFT; + + /* + * Compute the prescaler value for which (1 << PWM_DUTY_WIDTH) + * cycles at the PWM clock rate will take period_ns nanoseconds. + */ + rate = clk_get_rate(pc->clk) >> PWM_DUTY_WIDTH; + hz = NSEC_PER_SEC / period_ns; + + rate = (rate + (hz / 2)) / hz; + + /* + * Since the actual PWM divider is the register's frequency divider + * field minus 1, we need to decrement to get the correct value to + * write to the register. + */ + if (rate > 0) + rate--; + + /* + * Make sure that the rate will fit in the register's frequency + * divider field. + */ + if (rate >> PWM_SCALE_WIDTH) + return -EINVAL; + + val |= rate << PWM_SCALE_SHIFT; + + /* + * If the PWM channel is disabled, make sure to turn on the clock + * before writing the register. Otherwise, keep it enabled. + */ + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + err = clk_prepare_enable(pc->clk); + if (err < 0) + return err; + } else + val |= PWM_ENABLE; + + pwm_writel(pc, pwm->hwpwm, val); + + /* + * If the PWM is not enabled, turn the clock off again to save power. + */ + if (!test_bit(PWMF_ENABLED, &pwm->flags)) + clk_disable_unprepare(pc->clk); + + return 0; +} + +static int tegra_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip); + int rc = 0; + u32 val; + + rc = clk_prepare_enable(pc->clk); + if (rc < 0) + return rc; + + val = pwm_readl(pc, pwm->hwpwm); + val |= PWM_ENABLE; + pwm_writel(pc, pwm->hwpwm, val); + + return 0; +} + +static void tegra_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip); + u32 val; + + val = pwm_readl(pc, pwm->hwpwm); + val &= ~PWM_ENABLE; + pwm_writel(pc, pwm->hwpwm, val); + + clk_disable_unprepare(pc->clk); +} + +static const struct pwm_ops tegra_pwm_ops = { + .config = tegra_pwm_config, + .enable = tegra_pwm_enable, + .disable = tegra_pwm_disable, + .owner = THIS_MODULE, +}; + +static int tegra_pwm_probe(struct platform_device *pdev) +{ + struct tegra_pwm_chip *pwm; + struct resource *r; + int ret; + + pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); + if (!pwm) + return -ENOMEM; + + pwm->dev = &pdev->dev; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(pwm->mmio_base)) + return PTR_ERR(pwm->mmio_base); + + platform_set_drvdata(pdev, pwm); + + pwm->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pwm->clk)) + return PTR_ERR(pwm->clk); + + pwm->chip.dev = &pdev->dev; + pwm->chip.ops = &tegra_pwm_ops; + pwm->chip.base = -1; + pwm->chip.npwm = NUM_PWM; + + ret = pwmchip_add(&pwm->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + return 0; +} + +static int tegra_pwm_remove(struct platform_device *pdev) +{ + struct tegra_pwm_chip *pc = platform_get_drvdata(pdev); + int i; + + if (WARN_ON(!pc)) + return -ENODEV; + + for (i = 0; i < NUM_PWM; i++) { + struct pwm_device *pwm = &pc->chip.pwms[i]; + + if (!test_bit(PWMF_ENABLED, &pwm->flags)) + if (clk_prepare_enable(pc->clk) < 0) + continue; + + pwm_writel(pc, i, 0); + + clk_disable_unprepare(pc->clk); + } + + return pwmchip_remove(&pc->chip); +} + +static const struct of_device_id tegra_pwm_of_match[] = { + { .compatible = "nvidia,tegra20-pwm" }, + { .compatible = "nvidia,tegra30-pwm" }, + { } +}; + +MODULE_DEVICE_TABLE(of, tegra_pwm_of_match); + +static struct platform_driver tegra_pwm_driver = { + .driver = { + .name = "tegra-pwm", + .of_match_table = tegra_pwm_of_match, + }, + .probe = tegra_pwm_probe, + .remove = tegra_pwm_remove, +}; + +module_platform_driver(tegra_pwm_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("NVIDIA Corporation"); +MODULE_ALIAS("platform:tegra-pwm"); diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c new file mode 100644 index 000000000..e557befdf --- /dev/null +++ b/drivers/pwm/pwm-tiecap.c @@ -0,0 +1,345 @@ +/* + * ECAP PWM driver + * + * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/pm_runtime.h> +#include <linux/pwm.h> +#include <linux/of_device.h> + +#include "pwm-tipwmss.h" + +/* ECAP registers and bits definitions */ +#define CAP1 0x08 +#define CAP2 0x0C +#define CAP3 0x10 +#define CAP4 0x14 +#define ECCTL2 0x2A +#define ECCTL2_APWM_POL_LOW BIT(10) +#define ECCTL2_APWM_MODE BIT(9) +#define ECCTL2_SYNC_SEL_DISA (BIT(7) | BIT(6)) +#define ECCTL2_TSCTR_FREERUN BIT(4) + +struct ecap_context { + u32 cap3; + u32 cap4; + u16 ecctl2; +}; + +struct ecap_pwm_chip { + struct pwm_chip chip; + unsigned int clk_rate; + void __iomem *mmio_base; + struct ecap_context ctx; +}; + +static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct ecap_pwm_chip, chip); +} + +/* + * period_ns = 10^9 * period_cycles / PWM_CLK_RATE + * duty_ns = 10^9 * duty_cycles / PWM_CLK_RATE + */ +static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); + unsigned long long c; + unsigned long period_cycles, duty_cycles; + unsigned int reg_val; + + if (period_ns > NSEC_PER_SEC) + return -ERANGE; + + c = pc->clk_rate; + c = c * period_ns; + do_div(c, NSEC_PER_SEC); + period_cycles = (unsigned long)c; + + if (period_cycles < 1) { + period_cycles = 1; + duty_cycles = 1; + } else { + c = pc->clk_rate; + c = c * duty_ns; + do_div(c, NSEC_PER_SEC); + duty_cycles = (unsigned long)c; + } + + pm_runtime_get_sync(pc->chip.dev); + + reg_val = readw(pc->mmio_base + ECCTL2); + + /* Configure APWM mode & disable sync option */ + reg_val |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA; + + writew(reg_val, pc->mmio_base + ECCTL2); + + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + /* Update active registers if not running */ + writel(duty_cycles, pc->mmio_base + CAP2); + writel(period_cycles, pc->mmio_base + CAP1); + } else { + /* + * Update shadow registers to configure period and + * compare values. This helps current PWM period to + * complete on reconfiguring + */ + writel(duty_cycles, pc->mmio_base + CAP4); + writel(period_cycles, pc->mmio_base + CAP3); + } + + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + reg_val = readw(pc->mmio_base + ECCTL2); + /* Disable APWM mode to put APWM output Low */ + reg_val &= ~ECCTL2_APWM_MODE; + writew(reg_val, pc->mmio_base + ECCTL2); + } + + pm_runtime_put_sync(pc->chip.dev); + return 0; +} + +static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); + unsigned short reg_val; + + pm_runtime_get_sync(pc->chip.dev); + reg_val = readw(pc->mmio_base + ECCTL2); + if (polarity == PWM_POLARITY_INVERSED) + /* Duty cycle defines LOW period of PWM */ + reg_val |= ECCTL2_APWM_POL_LOW; + else + /* Duty cycle defines HIGH period of PWM */ + reg_val &= ~ECCTL2_APWM_POL_LOW; + + writew(reg_val, pc->mmio_base + ECCTL2); + pm_runtime_put_sync(pc->chip.dev); + return 0; +} + +static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); + unsigned int reg_val; + + /* Leave clock enabled on enabling PWM */ + pm_runtime_get_sync(pc->chip.dev); + + /* + * Enable 'Free run Time stamp counter mode' to start counter + * and 'APWM mode' to enable APWM output + */ + reg_val = readw(pc->mmio_base + ECCTL2); + reg_val |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE; + writew(reg_val, pc->mmio_base + ECCTL2); + return 0; +} + +static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip); + unsigned int reg_val; + + /* + * Disable 'Free run Time stamp counter mode' to stop counter + * and 'APWM mode' to put APWM output to low + */ + reg_val = readw(pc->mmio_base + ECCTL2); + reg_val &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE); + writew(reg_val, pc->mmio_base + ECCTL2); + + /* Disable clock on PWM disable */ + pm_runtime_put_sync(pc->chip.dev); +} + +static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + if (test_bit(PWMF_ENABLED, &pwm->flags)) { + dev_warn(chip->dev, "Removing PWM device without disabling\n"); + pm_runtime_put_sync(chip->dev); + } +} + +static const struct pwm_ops ecap_pwm_ops = { + .free = ecap_pwm_free, + .config = ecap_pwm_config, + .set_polarity = ecap_pwm_set_polarity, + .enable = ecap_pwm_enable, + .disable = ecap_pwm_disable, + .owner = THIS_MODULE, +}; + +static const struct of_device_id ecap_of_match[] = { + { .compatible = "ti,am33xx-ecap" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ecap_of_match); + +static int ecap_pwm_probe(struct platform_device *pdev) +{ + int ret; + struct resource *r; + struct clk *clk; + struct ecap_pwm_chip *pc; + u16 status; + + pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); + if (!pc) + return -ENOMEM; + + clk = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(clk); + } + + pc->clk_rate = clk_get_rate(clk); + if (!pc->clk_rate) { + dev_err(&pdev->dev, "failed to get clock rate\n"); + return -EINVAL; + } + + pc->chip.dev = &pdev->dev; + pc->chip.ops = &ecap_pwm_ops; + pc->chip.of_xlate = of_pwm_xlate_with_flags; + pc->chip.of_pwm_n_cells = 3; + pc->chip.base = -1; + pc->chip.npwm = 1; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(pc->mmio_base)) + return PTR_ERR(pc->mmio_base); + + ret = pwmchip_add(&pc->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + status = pwmss_submodule_state_change(pdev->dev.parent, + PWMSS_ECAPCLK_EN); + if (!(status & PWMSS_ECAPCLK_EN_ACK)) { + dev_err(&pdev->dev, "PWMSS config space clock enable failed\n"); + ret = -EINVAL; + goto pwmss_clk_failure; + } + + pm_runtime_put_sync(&pdev->dev); + + platform_set_drvdata(pdev, pc); + return 0; + +pwmss_clk_failure: + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pwmchip_remove(&pc->chip); + return ret; +} + +static int ecap_pwm_remove(struct platform_device *pdev) +{ + struct ecap_pwm_chip *pc = platform_get_drvdata(pdev); + + pm_runtime_get_sync(&pdev->dev); + /* + * Due to hardware misbehaviour, acknowledge of the stop_req + * is missing. Hence checking of the status bit skipped. + */ + pwmss_submodule_state_change(pdev->dev.parent, PWMSS_ECAPCLK_STOP_REQ); + pm_runtime_put_sync(&pdev->dev); + + pm_runtime_disable(&pdev->dev); + return pwmchip_remove(&pc->chip); +} + +#ifdef CONFIG_PM_SLEEP +static void ecap_pwm_save_context(struct ecap_pwm_chip *pc) +{ + pm_runtime_get_sync(pc->chip.dev); + pc->ctx.ecctl2 = readw(pc->mmio_base + ECCTL2); + pc->ctx.cap4 = readl(pc->mmio_base + CAP4); + pc->ctx.cap3 = readl(pc->mmio_base + CAP3); + pm_runtime_put_sync(pc->chip.dev); +} + +static void ecap_pwm_restore_context(struct ecap_pwm_chip *pc) +{ + writel(pc->ctx.cap3, pc->mmio_base + CAP3); + writel(pc->ctx.cap4, pc->mmio_base + CAP4); + writew(pc->ctx.ecctl2, pc->mmio_base + ECCTL2); +} + +static int ecap_pwm_suspend(struct device *dev) +{ + struct ecap_pwm_chip *pc = dev_get_drvdata(dev); + struct pwm_device *pwm = pc->chip.pwms; + + ecap_pwm_save_context(pc); + + /* Disable explicitly if PWM is running */ + if (test_bit(PWMF_ENABLED, &pwm->flags)) + pm_runtime_put_sync(dev); + + return 0; +} + +static int ecap_pwm_resume(struct device *dev) +{ + struct ecap_pwm_chip *pc = dev_get_drvdata(dev); + struct pwm_device *pwm = pc->chip.pwms; + + /* Enable explicitly if PWM was running */ + if (test_bit(PWMF_ENABLED, &pwm->flags)) + pm_runtime_get_sync(dev); + + ecap_pwm_restore_context(pc); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ecap_pwm_pm_ops, ecap_pwm_suspend, ecap_pwm_resume); + +static struct platform_driver ecap_pwm_driver = { + .driver = { + .name = "ecap", + .of_match_table = ecap_of_match, + .pm = &ecap_pwm_pm_ops, + }, + .probe = ecap_pwm_probe, + .remove = ecap_pwm_remove, +}; + +module_platform_driver(ecap_pwm_driver); + +MODULE_DESCRIPTION("ECAP PWM driver"); +MODULE_AUTHOR("Texas Instruments"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c new file mode 100644 index 000000000..694b3cf76 --- /dev/null +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -0,0 +1,613 @@ +/* + * EHRPWM PWM driver + * + * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/pm_runtime.h> +#include <linux/of_device.h> + +#include "pwm-tipwmss.h" + +/* EHRPWM registers and bits definitions */ + +/* Time base module registers */ +#define TBCTL 0x00 +#define TBPRD 0x0A + +#define TBCTL_RUN_MASK (BIT(15) | BIT(14)) +#define TBCTL_STOP_NEXT 0 +#define TBCTL_STOP_ON_CYCLE BIT(14) +#define TBCTL_FREE_RUN (BIT(15) | BIT(14)) +#define TBCTL_PRDLD_MASK BIT(3) +#define TBCTL_PRDLD_SHDW 0 +#define TBCTL_PRDLD_IMDT BIT(3) +#define TBCTL_CLKDIV_MASK (BIT(12) | BIT(11) | BIT(10) | BIT(9) | \ + BIT(8) | BIT(7)) +#define TBCTL_CTRMODE_MASK (BIT(1) | BIT(0)) +#define TBCTL_CTRMODE_UP 0 +#define TBCTL_CTRMODE_DOWN BIT(0) +#define TBCTL_CTRMODE_UPDOWN BIT(1) +#define TBCTL_CTRMODE_FREEZE (BIT(1) | BIT(0)) + +#define TBCTL_HSPCLKDIV_SHIFT 7 +#define TBCTL_CLKDIV_SHIFT 10 + +#define CLKDIV_MAX 7 +#define HSPCLKDIV_MAX 7 +#define PERIOD_MAX 0xFFFF + +/* compare module registers */ +#define CMPA 0x12 +#define CMPB 0x14 + +/* Action qualifier module registers */ +#define AQCTLA 0x16 +#define AQCTLB 0x18 +#define AQSFRC 0x1A +#define AQCSFRC 0x1C + +#define AQCTL_CBU_MASK (BIT(9) | BIT(8)) +#define AQCTL_CBU_FRCLOW BIT(8) +#define AQCTL_CBU_FRCHIGH BIT(9) +#define AQCTL_CBU_FRCTOGGLE (BIT(9) | BIT(8)) +#define AQCTL_CAU_MASK (BIT(5) | BIT(4)) +#define AQCTL_CAU_FRCLOW BIT(4) +#define AQCTL_CAU_FRCHIGH BIT(5) +#define AQCTL_CAU_FRCTOGGLE (BIT(5) | BIT(4)) +#define AQCTL_PRD_MASK (BIT(3) | BIT(2)) +#define AQCTL_PRD_FRCLOW BIT(2) +#define AQCTL_PRD_FRCHIGH BIT(3) +#define AQCTL_PRD_FRCTOGGLE (BIT(3) | BIT(2)) +#define AQCTL_ZRO_MASK (BIT(1) | BIT(0)) +#define AQCTL_ZRO_FRCLOW BIT(0) +#define AQCTL_ZRO_FRCHIGH BIT(1) +#define AQCTL_ZRO_FRCTOGGLE (BIT(1) | BIT(0)) + +#define AQCTL_CHANA_POLNORMAL (AQCTL_CAU_FRCLOW | AQCTL_PRD_FRCHIGH | \ + AQCTL_ZRO_FRCHIGH) +#define AQCTL_CHANA_POLINVERSED (AQCTL_CAU_FRCHIGH | AQCTL_PRD_FRCLOW | \ + AQCTL_ZRO_FRCLOW) +#define AQCTL_CHANB_POLNORMAL (AQCTL_CBU_FRCLOW | AQCTL_PRD_FRCHIGH | \ + AQCTL_ZRO_FRCHIGH) +#define AQCTL_CHANB_POLINVERSED (AQCTL_CBU_FRCHIGH | AQCTL_PRD_FRCLOW | \ + AQCTL_ZRO_FRCLOW) + +#define AQSFRC_RLDCSF_MASK (BIT(7) | BIT(6)) +#define AQSFRC_RLDCSF_ZRO 0 +#define AQSFRC_RLDCSF_PRD BIT(6) +#define AQSFRC_RLDCSF_ZROPRD BIT(7) +#define AQSFRC_RLDCSF_IMDT (BIT(7) | BIT(6)) + +#define AQCSFRC_CSFB_MASK (BIT(3) | BIT(2)) +#define AQCSFRC_CSFB_FRCDIS 0 +#define AQCSFRC_CSFB_FRCLOW BIT(2) +#define AQCSFRC_CSFB_FRCHIGH BIT(3) +#define AQCSFRC_CSFB_DISSWFRC (BIT(3) | BIT(2)) +#define AQCSFRC_CSFA_MASK (BIT(1) | BIT(0)) +#define AQCSFRC_CSFA_FRCDIS 0 +#define AQCSFRC_CSFA_FRCLOW BIT(0) +#define AQCSFRC_CSFA_FRCHIGH BIT(1) +#define AQCSFRC_CSFA_DISSWFRC (BIT(1) | BIT(0)) + +#define NUM_PWM_CHANNEL 2 /* EHRPWM channels */ + +struct ehrpwm_context { + u16 tbctl; + u16 tbprd; + u16 cmpa; + u16 cmpb; + u16 aqctla; + u16 aqctlb; + u16 aqsfrc; + u16 aqcsfrc; +}; + +struct ehrpwm_pwm_chip { + struct pwm_chip chip; + unsigned int clk_rate; + void __iomem *mmio_base; + unsigned long period_cycles[NUM_PWM_CHANNEL]; + enum pwm_polarity polarity[NUM_PWM_CHANNEL]; + struct clk *tbclk; + struct ehrpwm_context ctx; +}; + +static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct ehrpwm_pwm_chip, chip); +} + +static inline u16 ehrpwm_read(void __iomem *base, int offset) +{ + return readw(base + offset); +} + +static inline void ehrpwm_write(void __iomem *base, int offset, unsigned int val) +{ + writew(val & 0xFFFF, base + offset); +} + +static void ehrpwm_modify(void __iomem *base, int offset, + unsigned short mask, unsigned short val) +{ + unsigned short regval; + + regval = readw(base + offset); + regval &= ~mask; + regval |= val & mask; + writew(regval, base + offset); +} + +/** + * set_prescale_div - Set up the prescaler divider function + * @rqst_prescaler: prescaler value min + * @prescale_div: prescaler value set + * @tb_clk_div: Time Base Control prescaler bits + */ +static int set_prescale_div(unsigned long rqst_prescaler, + unsigned short *prescale_div, unsigned short *tb_clk_div) +{ + unsigned int clkdiv, hspclkdiv; + + for (clkdiv = 0; clkdiv <= CLKDIV_MAX; clkdiv++) { + for (hspclkdiv = 0; hspclkdiv <= HSPCLKDIV_MAX; hspclkdiv++) { + + /* + * calculations for prescaler value : + * prescale_div = HSPCLKDIVIDER * CLKDIVIDER. + * HSPCLKDIVIDER = 2 ** hspclkdiv + * CLKDIVIDER = (1), if clkdiv == 0 *OR* + * (2 * clkdiv), if clkdiv != 0 + * + * Configure prescale_div value such that period + * register value is less than 65535. + */ + + *prescale_div = (1 << clkdiv) * + (hspclkdiv ? (hspclkdiv * 2) : 1); + if (*prescale_div > rqst_prescaler) { + *tb_clk_div = (clkdiv << TBCTL_CLKDIV_SHIFT) | + (hspclkdiv << TBCTL_HSPCLKDIV_SHIFT); + return 0; + } + } + } + return 1; +} + +static void configure_polarity(struct ehrpwm_pwm_chip *pc, int chan) +{ + int aqctl_reg; + unsigned short aqctl_val, aqctl_mask; + + /* + * Configure PWM output to HIGH/LOW level on counter + * reaches compare register value and LOW/HIGH level + * on counter value reaches period register value and + * zero value on counter + */ + if (chan == 1) { + aqctl_reg = AQCTLB; + aqctl_mask = AQCTL_CBU_MASK; + + if (pc->polarity[chan] == PWM_POLARITY_INVERSED) + aqctl_val = AQCTL_CHANB_POLINVERSED; + else + aqctl_val = AQCTL_CHANB_POLNORMAL; + } else { + aqctl_reg = AQCTLA; + aqctl_mask = AQCTL_CAU_MASK; + + if (pc->polarity[chan] == PWM_POLARITY_INVERSED) + aqctl_val = AQCTL_CHANA_POLINVERSED; + else + aqctl_val = AQCTL_CHANA_POLNORMAL; + } + + aqctl_mask |= AQCTL_PRD_MASK | AQCTL_ZRO_MASK; + ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val); +} + +/* + * period_ns = 10^9 * (ps_divval * period_cycles) / PWM_CLK_RATE + * duty_ns = 10^9 * (ps_divval * duty_cycles) / PWM_CLK_RATE + */ +static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + unsigned long long c; + unsigned long period_cycles, duty_cycles; + unsigned short ps_divval, tb_divval; + int i, cmp_reg; + + if (period_ns > NSEC_PER_SEC) + return -ERANGE; + + c = pc->clk_rate; + c = c * period_ns; + do_div(c, NSEC_PER_SEC); + period_cycles = (unsigned long)c; + + if (period_cycles < 1) { + period_cycles = 1; + duty_cycles = 1; + } else { + c = pc->clk_rate; + c = c * duty_ns; + do_div(c, NSEC_PER_SEC); + duty_cycles = (unsigned long)c; + } + + /* + * Period values should be same for multiple PWM channels as IP uses + * same period register for multiple channels. + */ + for (i = 0; i < NUM_PWM_CHANNEL; i++) { + if (pc->period_cycles[i] && + (pc->period_cycles[i] != period_cycles)) { + /* + * Allow channel to reconfigure period if no other + * channels being configured. + */ + if (i == pwm->hwpwm) + continue; + + dev_err(chip->dev, "Period value conflicts with channel %d\n", + i); + return -EINVAL; + } + } + + pc->period_cycles[pwm->hwpwm] = period_cycles; + + /* Configure clock prescaler to support Low frequency PWM wave */ + if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval, + &tb_divval)) { + dev_err(chip->dev, "Unsupported values\n"); + return -EINVAL; + } + + pm_runtime_get_sync(chip->dev); + + /* Update clock prescaler values */ + ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CLKDIV_MASK, tb_divval); + + /* Update period & duty cycle with presacler division */ + period_cycles = period_cycles / ps_divval; + duty_cycles = duty_cycles / ps_divval; + + /* Configure shadow loading on Period register */ + ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_PRDLD_MASK, TBCTL_PRDLD_SHDW); + + ehrpwm_write(pc->mmio_base, TBPRD, period_cycles); + + /* Configure ehrpwm counter for up-count mode */ + ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CTRMODE_MASK, + TBCTL_CTRMODE_UP); + + if (pwm->hwpwm == 1) + /* Channel 1 configured with compare B register */ + cmp_reg = CMPB; + else + /* Channel 0 configured with compare A register */ + cmp_reg = CMPA; + + ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles); + + pm_runtime_put_sync(chip->dev); + return 0; +} + +static int ehrpwm_pwm_set_polarity(struct pwm_chip *chip, + struct pwm_device *pwm, enum pwm_polarity polarity) +{ + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + + /* Configuration of polarity in hardware delayed, do at enable */ + pc->polarity[pwm->hwpwm] = polarity; + return 0; +} + +static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + unsigned short aqcsfrc_val, aqcsfrc_mask; + int ret; + + /* Leave clock enabled on enabling PWM */ + pm_runtime_get_sync(chip->dev); + + /* Disabling Action Qualifier on PWM output */ + if (pwm->hwpwm) { + aqcsfrc_val = AQCSFRC_CSFB_FRCDIS; + aqcsfrc_mask = AQCSFRC_CSFB_MASK; + } else { + aqcsfrc_val = AQCSFRC_CSFA_FRCDIS; + aqcsfrc_mask = AQCSFRC_CSFA_MASK; + } + + /* Changes to shadow mode */ + ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK, + AQSFRC_RLDCSF_ZRO); + + ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val); + + /* Channels polarity can be configured from action qualifier module */ + configure_polarity(pc, pwm->hwpwm); + + /* Enable TBCLK before enabling PWM device */ + ret = clk_enable(pc->tbclk); + if (ret) { + dev_err(chip->dev, "Failed to enable TBCLK for %s\n", + dev_name(pc->chip.dev)); + return ret; + } + + /* Enable time counter for free_run */ + ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN); + return 0; +} + +static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + unsigned short aqcsfrc_val, aqcsfrc_mask; + + /* Action Qualifier puts PWM output low forcefully */ + if (pwm->hwpwm) { + aqcsfrc_val = AQCSFRC_CSFB_FRCLOW; + aqcsfrc_mask = AQCSFRC_CSFB_MASK; + } else { + aqcsfrc_val = AQCSFRC_CSFA_FRCLOW; + aqcsfrc_mask = AQCSFRC_CSFA_MASK; + } + + /* + * Changes to immediate action on Action Qualifier. This puts + * Action Qualifier control on PWM output from next TBCLK + */ + ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK, + AQSFRC_RLDCSF_IMDT); + + ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val); + + /* Disabling TBCLK on PWM disable */ + clk_disable(pc->tbclk); + + /* Stop Time base counter */ + ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT); + + /* Disable clock on PWM disable */ + pm_runtime_put_sync(chip->dev); +} + +static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + + if (test_bit(PWMF_ENABLED, &pwm->flags)) { + dev_warn(chip->dev, "Removing PWM device without disabling\n"); + pm_runtime_put_sync(chip->dev); + } + + /* set period value to zero on free */ + pc->period_cycles[pwm->hwpwm] = 0; +} + +static const struct pwm_ops ehrpwm_pwm_ops = { + .free = ehrpwm_pwm_free, + .config = ehrpwm_pwm_config, + .set_polarity = ehrpwm_pwm_set_polarity, + .enable = ehrpwm_pwm_enable, + .disable = ehrpwm_pwm_disable, + .owner = THIS_MODULE, +}; + +static const struct of_device_id ehrpwm_of_match[] = { + { .compatible = "ti,am33xx-ehrpwm" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ehrpwm_of_match); + +static int ehrpwm_pwm_probe(struct platform_device *pdev) +{ + int ret; + struct resource *r; + struct clk *clk; + struct ehrpwm_pwm_chip *pc; + u16 status; + + pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); + if (!pc) + return -ENOMEM; + + clk = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(clk); + } + + pc->clk_rate = clk_get_rate(clk); + if (!pc->clk_rate) { + dev_err(&pdev->dev, "failed to get clock rate\n"); + return -EINVAL; + } + + pc->chip.dev = &pdev->dev; + pc->chip.ops = &ehrpwm_pwm_ops; + pc->chip.of_xlate = of_pwm_xlate_with_flags; + pc->chip.of_pwm_n_cells = 3; + pc->chip.base = -1; + pc->chip.npwm = NUM_PWM_CHANNEL; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(pc->mmio_base)) + return PTR_ERR(pc->mmio_base); + + /* Acquire tbclk for Time Base EHRPWM submodule */ + pc->tbclk = devm_clk_get(&pdev->dev, "tbclk"); + if (IS_ERR(pc->tbclk)) { + dev_err(&pdev->dev, "Failed to get tbclk\n"); + return PTR_ERR(pc->tbclk); + } + + ret = clk_prepare(pc->tbclk); + if (ret < 0) { + dev_err(&pdev->dev, "clk_prepare() failed: %d\n", ret); + return ret; + } + + ret = pwmchip_add(&pc->chip); + if (ret < 0) { + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + return ret; + } + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + status = pwmss_submodule_state_change(pdev->dev.parent, + PWMSS_EPWMCLK_EN); + if (!(status & PWMSS_EPWMCLK_EN_ACK)) { + dev_err(&pdev->dev, "PWMSS config space clock enable failed\n"); + ret = -EINVAL; + goto pwmss_clk_failure; + } + + pm_runtime_put_sync(&pdev->dev); + + platform_set_drvdata(pdev, pc); + return 0; + +pwmss_clk_failure: + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pwmchip_remove(&pc->chip); + clk_unprepare(pc->tbclk); + return ret; +} + +static int ehrpwm_pwm_remove(struct platform_device *pdev) +{ + struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev); + + clk_unprepare(pc->tbclk); + + pm_runtime_get_sync(&pdev->dev); + /* + * Due to hardware misbehaviour, acknowledge of the stop_req + * is missing. Hence checking of the status bit skipped. + */ + pwmss_submodule_state_change(pdev->dev.parent, PWMSS_EPWMCLK_STOP_REQ); + pm_runtime_put_sync(&pdev->dev); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return pwmchip_remove(&pc->chip); +} + +#ifdef CONFIG_PM_SLEEP +static void ehrpwm_pwm_save_context(struct ehrpwm_pwm_chip *pc) +{ + pm_runtime_get_sync(pc->chip.dev); + pc->ctx.tbctl = ehrpwm_read(pc->mmio_base, TBCTL); + pc->ctx.tbprd = ehrpwm_read(pc->mmio_base, TBPRD); + pc->ctx.cmpa = ehrpwm_read(pc->mmio_base, CMPA); + pc->ctx.cmpb = ehrpwm_read(pc->mmio_base, CMPB); + pc->ctx.aqctla = ehrpwm_read(pc->mmio_base, AQCTLA); + pc->ctx.aqctlb = ehrpwm_read(pc->mmio_base, AQCTLB); + pc->ctx.aqsfrc = ehrpwm_read(pc->mmio_base, AQSFRC); + pc->ctx.aqcsfrc = ehrpwm_read(pc->mmio_base, AQCSFRC); + pm_runtime_put_sync(pc->chip.dev); +} + +static void ehrpwm_pwm_restore_context(struct ehrpwm_pwm_chip *pc) +{ + ehrpwm_write(pc->mmio_base, TBPRD, pc->ctx.tbprd); + ehrpwm_write(pc->mmio_base, CMPA, pc->ctx.cmpa); + ehrpwm_write(pc->mmio_base, CMPB, pc->ctx.cmpb); + ehrpwm_write(pc->mmio_base, AQCTLA, pc->ctx.aqctla); + ehrpwm_write(pc->mmio_base, AQCTLB, pc->ctx.aqctlb); + ehrpwm_write(pc->mmio_base, AQSFRC, pc->ctx.aqsfrc); + ehrpwm_write(pc->mmio_base, AQCSFRC, pc->ctx.aqcsfrc); + ehrpwm_write(pc->mmio_base, TBCTL, pc->ctx.tbctl); +} + +static int ehrpwm_pwm_suspend(struct device *dev) +{ + struct ehrpwm_pwm_chip *pc = dev_get_drvdata(dev); + int i; + + ehrpwm_pwm_save_context(pc); + for (i = 0; i < pc->chip.npwm; i++) { + struct pwm_device *pwm = &pc->chip.pwms[i]; + + if (!test_bit(PWMF_ENABLED, &pwm->flags)) + continue; + + /* Disable explicitly if PWM is running */ + pm_runtime_put_sync(dev); + } + return 0; +} + +static int ehrpwm_pwm_resume(struct device *dev) +{ + struct ehrpwm_pwm_chip *pc = dev_get_drvdata(dev); + int i; + + for (i = 0; i < pc->chip.npwm; i++) { + struct pwm_device *pwm = &pc->chip.pwms[i]; + + if (!test_bit(PWMF_ENABLED, &pwm->flags)) + continue; + + /* Enable explicitly if PWM was running */ + pm_runtime_get_sync(dev); + } + ehrpwm_pwm_restore_context(pc); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ehrpwm_pwm_pm_ops, ehrpwm_pwm_suspend, + ehrpwm_pwm_resume); + +static struct platform_driver ehrpwm_pwm_driver = { + .driver = { + .name = "ehrpwm", + .of_match_table = ehrpwm_of_match, + .pm = &ehrpwm_pwm_pm_ops, + }, + .probe = ehrpwm_pwm_probe, + .remove = ehrpwm_pwm_remove, +}; + +module_platform_driver(ehrpwm_pwm_driver); + +MODULE_DESCRIPTION("EHRPWM PWM driver"); +MODULE_AUTHOR("Texas Instruments"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-tipwmss.c b/drivers/pwm/pwm-tipwmss.c new file mode 100644 index 000000000..5cf65a15d --- /dev/null +++ b/drivers/pwm/pwm-tipwmss.c @@ -0,0 +1,133 @@ +/* + * TI PWM Subsystem driver + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/pm_runtime.h> +#include <linux/of_device.h> + +#include "pwm-tipwmss.h" + +#define PWMSS_CLKCONFIG 0x8 /* Clock gating reg */ +#define PWMSS_CLKSTATUS 0xc /* Clock gating status reg */ + +struct pwmss_info { + void __iomem *mmio_base; + struct mutex pwmss_lock; + u16 pwmss_clkconfig; +}; + +u16 pwmss_submodule_state_change(struct device *dev, int set) +{ + struct pwmss_info *info = dev_get_drvdata(dev); + u16 val; + + mutex_lock(&info->pwmss_lock); + val = readw(info->mmio_base + PWMSS_CLKCONFIG); + val |= set; + writew(val , info->mmio_base + PWMSS_CLKCONFIG); + mutex_unlock(&info->pwmss_lock); + + return readw(info->mmio_base + PWMSS_CLKSTATUS); +} +EXPORT_SYMBOL(pwmss_submodule_state_change); + +static const struct of_device_id pwmss_of_match[] = { + { .compatible = "ti,am33xx-pwmss" }, + {}, +}; +MODULE_DEVICE_TABLE(of, pwmss_of_match); + +static int pwmss_probe(struct platform_device *pdev) +{ + int ret; + struct resource *r; + struct pwmss_info *info; + struct device_node *node = pdev->dev.of_node; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + mutex_init(&info->pwmss_lock); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + info->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(info->mmio_base)) + return PTR_ERR(info->mmio_base); + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + platform_set_drvdata(pdev, info); + + /* Populate all the child nodes here... */ + ret = of_platform_populate(node, NULL, NULL, &pdev->dev); + if (ret) + dev_err(&pdev->dev, "no child node found\n"); + + return ret; +} + +static int pwmss_remove(struct platform_device *pdev) +{ + struct pwmss_info *info = platform_get_drvdata(pdev); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + mutex_destroy(&info->pwmss_lock); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pwmss_suspend(struct device *dev) +{ + struct pwmss_info *info = dev_get_drvdata(dev); + + info->pwmss_clkconfig = readw(info->mmio_base + PWMSS_CLKCONFIG); + pm_runtime_put_sync(dev); + return 0; +} + +static int pwmss_resume(struct device *dev) +{ + struct pwmss_info *info = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + writew(info->pwmss_clkconfig, info->mmio_base + PWMSS_CLKCONFIG); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pwmss_pm_ops, pwmss_suspend, pwmss_resume); + +static struct platform_driver pwmss_driver = { + .driver = { + .name = "pwmss", + .pm = &pwmss_pm_ops, + .of_match_table = pwmss_of_match, + }, + .probe = pwmss_probe, + .remove = pwmss_remove, +}; + +module_platform_driver(pwmss_driver); + +MODULE_DESCRIPTION("PWM Subsystem driver"); +MODULE_AUTHOR("Texas Instruments"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-tipwmss.h b/drivers/pwm/pwm-tipwmss.h new file mode 100644 index 000000000..10ad80404 --- /dev/null +++ b/drivers/pwm/pwm-tipwmss.h @@ -0,0 +1,39 @@ +/* + * TI PWM Subsystem driver + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __TIPWMSS_H +#define __TIPWMSS_H + +/* PWM substem clock gating */ +#define PWMSS_ECAPCLK_EN BIT(0) +#define PWMSS_ECAPCLK_STOP_REQ BIT(1) +#define PWMSS_EPWMCLK_EN BIT(8) +#define PWMSS_EPWMCLK_STOP_REQ BIT(9) + +#define PWMSS_ECAPCLK_EN_ACK BIT(0) +#define PWMSS_EPWMCLK_EN_ACK BIT(8) + +#ifdef CONFIG_PWM_TIPWMSS +extern u16 pwmss_submodule_state_change(struct device *dev, int set); +#else +static inline u16 pwmss_submodule_state_change(struct device *dev, int set) +{ + /* return success status value */ + return 0xFFFF; +} +#endif +#endif /* __TIPWMSS_H */ diff --git a/drivers/pwm/pwm-twl-led.c b/drivers/pwm/pwm-twl-led.c new file mode 100644 index 000000000..b96447002 --- /dev/null +++ b/drivers/pwm/pwm-twl-led.c @@ -0,0 +1,348 @@ +/* + * Driver for TWL4030/6030 Pulse Width Modulator used as LED driver + * + * Copyright (C) 2012 Texas Instruments + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This driver is a complete rewrite of the former pwm-twl6030.c authorded by: + * Hemanth V <hemanthv@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/i2c/twl.h> +#include <linux/slab.h> + +/* + * This driver handles the PWM driven LED terminals of TWL4030 and TWL6030. + * To generate the signal on TWL4030: + * - LEDA uses PWMA + * - LEDB uses PWMB + * TWL6030 has one LED pin with dedicated LEDPWM + */ + +#define TWL4030_LED_MAX 0x7f +#define TWL6030_LED_MAX 0xff + +/* Registers, bits and macro for TWL4030 */ +#define TWL4030_LEDEN_REG 0x00 +#define TWL4030_PWMA_REG 0x01 + +#define TWL4030_LEDXON (1 << 0) +#define TWL4030_LEDXPWM (1 << 4) +#define TWL4030_LED_PINS (TWL4030_LEDXON | TWL4030_LEDXPWM) +#define TWL4030_LED_TOGGLE(led, x) ((x) << (led)) + +/* Register, bits and macro for TWL6030 */ +#define TWL6030_LED_PWM_CTRL1 0xf4 +#define TWL6030_LED_PWM_CTRL2 0xf5 + +#define TWL6040_LED_MODE_HW 0x00 +#define TWL6040_LED_MODE_ON 0x01 +#define TWL6040_LED_MODE_OFF 0x02 +#define TWL6040_LED_MODE_MASK 0x03 + +struct twl_pwmled_chip { + struct pwm_chip chip; + struct mutex mutex; +}; + +static inline struct twl_pwmled_chip *to_twl(struct pwm_chip *chip) +{ + return container_of(chip, struct twl_pwmled_chip, chip); +} + +static int twl4030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + int duty_cycle = DIV_ROUND_UP(duty_ns * TWL4030_LED_MAX, period_ns) + 1; + u8 pwm_config[2] = { 1, 0 }; + int base, ret; + + /* + * To configure the duty period: + * On-cycle is set to 1 (the minimum allowed value) + * The off time of 0 is not configurable, so the mapping is: + * 0 -> off cycle = 2, + * 1 -> off cycle = 2, + * 2 -> off cycle = 3, + * 126 - > off cycle 127, + * 127 - > off cycle 1 + * When on cycle == off cycle the PWM will be always on + */ + if (duty_cycle == 1) + duty_cycle = 2; + else if (duty_cycle > TWL4030_LED_MAX) + duty_cycle = 1; + + base = pwm->hwpwm * 2 + TWL4030_PWMA_REG; + + pwm_config[1] = duty_cycle; + + ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label); + + return ret; +} + +static int twl4030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct twl_pwmled_chip *twl = to_twl(chip); + int ret; + u8 val; + + mutex_lock(&twl->mutex); + ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label); + goto out; + } + + val |= TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS); + + ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label); + +out: + mutex_unlock(&twl->mutex); + return ret; +} + +static void twl4030_pwmled_disable(struct pwm_chip *chip, + struct pwm_device *pwm) +{ + struct twl_pwmled_chip *twl = to_twl(chip); + int ret; + u8 val; + + mutex_lock(&twl->mutex); + ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label); + goto out; + } + + val &= ~TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS); + + ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label); + +out: + mutex_unlock(&twl->mutex); +} + +static int twl6030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + int duty_cycle = (duty_ns * TWL6030_LED_MAX) / period_ns; + u8 on_time; + int ret; + + on_time = duty_cycle & 0xff; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, on_time, + TWL6030_LED_PWM_CTRL1); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label); + + return ret; +} + +static int twl6030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct twl_pwmled_chip *twl = to_twl(chip); + int ret; + u8 val; + + mutex_lock(&twl->mutex); + ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n", + pwm->label); + goto out; + } + + val &= ~TWL6040_LED_MODE_MASK; + val |= TWL6040_LED_MODE_ON; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label); + +out: + mutex_unlock(&twl->mutex); + return ret; +} + +static void twl6030_pwmled_disable(struct pwm_chip *chip, + struct pwm_device *pwm) +{ + struct twl_pwmled_chip *twl = to_twl(chip); + int ret; + u8 val; + + mutex_lock(&twl->mutex); + ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n", + pwm->label); + goto out; + } + + val &= ~TWL6040_LED_MODE_MASK; + val |= TWL6040_LED_MODE_OFF; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label); + +out: + mutex_unlock(&twl->mutex); +} + +static int twl6030_pwmled_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct twl_pwmled_chip *twl = to_twl(chip); + int ret; + u8 val; + + mutex_lock(&twl->mutex); + ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n", + pwm->label); + goto out; + } + + val &= ~TWL6040_LED_MODE_MASK; + val |= TWL6040_LED_MODE_OFF; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label); + +out: + mutex_unlock(&twl->mutex); + return ret; +} + +static void twl6030_pwmled_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct twl_pwmled_chip *twl = to_twl(chip); + int ret; + u8 val; + + mutex_lock(&twl->mutex); + ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n", + pwm->label); + goto out; + } + + val &= ~TWL6040_LED_MODE_MASK; + val |= TWL6040_LED_MODE_HW; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label); + +out: + mutex_unlock(&twl->mutex); +} + +static const struct pwm_ops twl4030_pwmled_ops = { + .enable = twl4030_pwmled_enable, + .disable = twl4030_pwmled_disable, + .config = twl4030_pwmled_config, + .owner = THIS_MODULE, +}; + +static const struct pwm_ops twl6030_pwmled_ops = { + .enable = twl6030_pwmled_enable, + .disable = twl6030_pwmled_disable, + .config = twl6030_pwmled_config, + .request = twl6030_pwmled_request, + .free = twl6030_pwmled_free, + .owner = THIS_MODULE, +}; + +static int twl_pwmled_probe(struct platform_device *pdev) +{ + struct twl_pwmled_chip *twl; + int ret; + + twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL); + if (!twl) + return -ENOMEM; + + if (twl_class_is_4030()) { + twl->chip.ops = &twl4030_pwmled_ops; + twl->chip.npwm = 2; + } else { + twl->chip.ops = &twl6030_pwmled_ops; + twl->chip.npwm = 1; + } + + twl->chip.dev = &pdev->dev; + twl->chip.base = -1; + twl->chip.can_sleep = true; + + mutex_init(&twl->mutex); + + ret = pwmchip_add(&twl->chip); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, twl); + + return 0; +} + +static int twl_pwmled_remove(struct platform_device *pdev) +{ + struct twl_pwmled_chip *twl = platform_get_drvdata(pdev); + + return pwmchip_remove(&twl->chip); +} + +#ifdef CONFIG_OF +static const struct of_device_id twl_pwmled_of_match[] = { + { .compatible = "ti,twl4030-pwmled" }, + { .compatible = "ti,twl6030-pwmled" }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl_pwmled_of_match); +#endif + +static struct platform_driver twl_pwmled_driver = { + .driver = { + .name = "twl-pwmled", + .of_match_table = of_match_ptr(twl_pwmled_of_match), + }, + .probe = twl_pwmled_probe, + .remove = twl_pwmled_remove, +}; +module_platform_driver(twl_pwmled_driver); + +MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>"); +MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030 LED outputs"); +MODULE_ALIAS("platform:twl-pwmled"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-twl.c b/drivers/pwm/pwm-twl.c new file mode 100644 index 000000000..04f76725d --- /dev/null +++ b/drivers/pwm/pwm-twl.c @@ -0,0 +1,352 @@ +/* + * Driver for TWL4030/6030 Generic Pulse Width Modulator + * + * Copyright (C) 2012 Texas Instruments + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/i2c/twl.h> +#include <linux/slab.h> + +/* + * This driver handles the PWMs of TWL4030 and TWL6030. + * The TRM names for the PWMs on TWL4030 are: PWM0, PWM1 + * TWL6030 also have two PWMs named in the TRM as PWM1, PWM2 + */ + +#define TWL_PWM_MAX 0x7f + +/* Registers, bits and macro for TWL4030 */ +#define TWL4030_GPBR1_REG 0x0c +#define TWL4030_PMBR1_REG 0x0d + +/* GPBR1 register bits */ +#define TWL4030_PWMXCLK_ENABLE (1 << 0) +#define TWL4030_PWMX_ENABLE (1 << 2) +#define TWL4030_PWMX_BITS (TWL4030_PWMX_ENABLE | TWL4030_PWMXCLK_ENABLE) +#define TWL4030_PWM_TOGGLE(pwm, x) ((x) << (pwm)) + +/* PMBR1 register bits */ +#define TWL4030_GPIO6_PWM0_MUTE_MASK (0x03 << 2) +#define TWL4030_GPIO6_PWM0_MUTE_PWM0 (0x01 << 2) +#define TWL4030_GPIO7_VIBRASYNC_PWM1_MASK (0x03 << 4) +#define TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1 (0x03 << 4) + +/* Register, bits and macro for TWL6030 */ +#define TWL6030_TOGGLE3_REG 0x92 + +#define TWL6030_PWMXR (1 << 0) +#define TWL6030_PWMXS (1 << 1) +#define TWL6030_PWMXEN (1 << 2) +#define TWL6030_PWM_TOGGLE(pwm, x) ((x) << (pwm * 3)) + +struct twl_pwm_chip { + struct pwm_chip chip; + struct mutex mutex; + u8 twl6030_toggle3; + u8 twl4030_pwm_mux; +}; + +static inline struct twl_pwm_chip *to_twl(struct pwm_chip *chip) +{ + return container_of(chip, struct twl_pwm_chip, chip); +} + +static int twl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + int duty_cycle = DIV_ROUND_UP(duty_ns * TWL_PWM_MAX, period_ns) + 1; + u8 pwm_config[2] = { 1, 0 }; + int base, ret; + + /* + * To configure the duty period: + * On-cycle is set to 1 (the minimum allowed value) + * The off time of 0 is not configurable, so the mapping is: + * 0 -> off cycle = 2, + * 1 -> off cycle = 2, + * 2 -> off cycle = 3, + * 126 - > off cycle 127, + * 127 - > off cycle 1 + * When on cycle == off cycle the PWM will be always on + */ + if (duty_cycle == 1) + duty_cycle = 2; + else if (duty_cycle > TWL_PWM_MAX) + duty_cycle = 1; + + base = pwm->hwpwm * 3; + + pwm_config[1] = duty_cycle; + + ret = twl_i2c_write(TWL_MODULE_PWM, pwm_config, base, 2); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label); + + return ret; +} + +static int twl4030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct twl_pwm_chip *twl = to_twl(chip); + int ret; + u8 val; + + mutex_lock(&twl->mutex); + ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label); + goto out; + } + + val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE); + + ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label); + + val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE); + + ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label); + +out: + mutex_unlock(&twl->mutex); + return ret; +} + +static void twl4030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct twl_pwm_chip *twl = to_twl(chip); + int ret; + u8 val; + + mutex_lock(&twl->mutex); + ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label); + goto out; + } + + val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE); + + ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label); + + val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE); + + ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label); + +out: + mutex_unlock(&twl->mutex); +} + +static int twl4030_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct twl_pwm_chip *twl = to_twl(chip); + int ret; + u8 val, mask, bits; + + if (pwm->hwpwm == 1) { + mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK; + bits = TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1; + } else { + mask = TWL4030_GPIO6_PWM0_MUTE_MASK; + bits = TWL4030_GPIO6_PWM0_MUTE_PWM0; + } + + mutex_lock(&twl->mutex); + ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label); + goto out; + } + + /* Save the current MUX configuration for the PWM */ + twl->twl4030_pwm_mux &= ~mask; + twl->twl4030_pwm_mux |= (val & mask); + + /* Select PWM functionality */ + val &= ~mask; + val |= bits; + + ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label); + +out: + mutex_unlock(&twl->mutex); + return ret; +} + +static void twl4030_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct twl_pwm_chip *twl = to_twl(chip); + int ret; + u8 val, mask; + + if (pwm->hwpwm == 1) + mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK; + else + mask = TWL4030_GPIO6_PWM0_MUTE_MASK; + + mutex_lock(&twl->mutex); + ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label); + goto out; + } + + /* Restore the MUX configuration for the PWM */ + val &= ~mask; + val |= (twl->twl4030_pwm_mux & mask); + + ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG); + if (ret < 0) + dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label); + +out: + mutex_unlock(&twl->mutex); +} + +static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct twl_pwm_chip *twl = to_twl(chip); + int ret; + u8 val; + + mutex_lock(&twl->mutex); + val = twl->twl6030_toggle3; + val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN); + val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR); + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label); + goto out; + } + + twl->twl6030_toggle3 = val; +out: + mutex_unlock(&twl->mutex); + return ret; +} + +static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct twl_pwm_chip *twl = to_twl(chip); + int ret; + u8 val; + + mutex_lock(&twl->mutex); + val = twl->twl6030_toggle3; + val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR); + val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN); + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG); + if (ret < 0) { + dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label); + goto out; + } + + twl->twl6030_toggle3 = val; +out: + mutex_unlock(&twl->mutex); +} + +static const struct pwm_ops twl4030_pwm_ops = { + .config = twl_pwm_config, + .enable = twl4030_pwm_enable, + .disable = twl4030_pwm_disable, + .request = twl4030_pwm_request, + .free = twl4030_pwm_free, + .owner = THIS_MODULE, +}; + +static const struct pwm_ops twl6030_pwm_ops = { + .config = twl_pwm_config, + .enable = twl6030_pwm_enable, + .disable = twl6030_pwm_disable, + .owner = THIS_MODULE, +}; + +static int twl_pwm_probe(struct platform_device *pdev) +{ + struct twl_pwm_chip *twl; + int ret; + + twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL); + if (!twl) + return -ENOMEM; + + if (twl_class_is_4030()) + twl->chip.ops = &twl4030_pwm_ops; + else + twl->chip.ops = &twl6030_pwm_ops; + + twl->chip.dev = &pdev->dev; + twl->chip.base = -1; + twl->chip.npwm = 2; + twl->chip.can_sleep = true; + + mutex_init(&twl->mutex); + + ret = pwmchip_add(&twl->chip); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, twl); + + return 0; +} + +static int twl_pwm_remove(struct platform_device *pdev) +{ + struct twl_pwm_chip *twl = platform_get_drvdata(pdev); + + return pwmchip_remove(&twl->chip); +} + +#ifdef CONFIG_OF +static const struct of_device_id twl_pwm_of_match[] = { + { .compatible = "ti,twl4030-pwm" }, + { .compatible = "ti,twl6030-pwm" }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl_pwm_of_match); +#endif + +static struct platform_driver twl_pwm_driver = { + .driver = { + .name = "twl-pwm", + .of_match_table = of_match_ptr(twl_pwm_of_match), + }, + .probe = twl_pwm_probe, + .remove = twl_pwm_remove, +}; +module_platform_driver(twl_pwm_driver); + +MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>"); +MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030"); +MODULE_ALIAS("platform:twl-pwm"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c new file mode 100644 index 000000000..cdb58fd46 --- /dev/null +++ b/drivers/pwm/pwm-vt8500.c @@ -0,0 +1,276 @@ +/* + * drivers/pwm/pwm-vt8500.c + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/pwm.h> +#include <linux/delay.h> +#include <linux/clk.h> + +#include <asm/div64.h> + +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> + +/* + * SoC architecture allocates register space for 4 PWMs but only + * 2 are currently implemented. + */ +#define VT8500_NR_PWMS 2 + +#define REG_CTRL(pwm) (((pwm) << 4) + 0x00) +#define REG_SCALAR(pwm) (((pwm) << 4) + 0x04) +#define REG_PERIOD(pwm) (((pwm) << 4) + 0x08) +#define REG_DUTY(pwm) (((pwm) << 4) + 0x0C) +#define REG_STATUS 0x40 + +#define CTRL_ENABLE BIT(0) +#define CTRL_INVERT BIT(1) +#define CTRL_AUTOLOAD BIT(2) +#define CTRL_STOP_IMM BIT(3) +#define CTRL_LOAD_PRESCALE BIT(4) +#define CTRL_LOAD_PERIOD BIT(5) + +#define STATUS_CTRL_UPDATE BIT(0) +#define STATUS_SCALAR_UPDATE BIT(1) +#define STATUS_PERIOD_UPDATE BIT(2) +#define STATUS_DUTY_UPDATE BIT(3) +#define STATUS_ALL_UPDATE 0x0F + +struct vt8500_chip { + struct pwm_chip chip; + void __iomem *base; + struct clk *clk; +}; + +#define to_vt8500_chip(chip) container_of(chip, struct vt8500_chip, chip) + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) +static inline void pwm_busy_wait(struct vt8500_chip *vt8500, int nr, u8 bitmask) +{ + int loops = msecs_to_loops(10); + u32 mask = bitmask << (nr << 8); + + while ((readl(vt8500->base + REG_STATUS) & mask) && --loops) + cpu_relax(); + + if (unlikely(!loops)) + dev_warn(vt8500->chip.dev, "Waiting for status bits 0x%x to clear timed out\n", + mask); +} + +static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct vt8500_chip *vt8500 = to_vt8500_chip(chip); + unsigned long long c; + unsigned long period_cycles, prescale, pv, dc; + int err; + u32 val; + + err = clk_enable(vt8500->clk); + if (err < 0) { + dev_err(chip->dev, "failed to enable clock\n"); + return err; + } + + c = clk_get_rate(vt8500->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + if (period_cycles < 1) + period_cycles = 1; + prescale = (period_cycles - 1) / 4096; + pv = period_cycles / (prescale + 1) - 1; + if (pv > 4095) + pv = 4095; + + if (prescale > 1023) { + clk_disable(vt8500->clk); + return -EINVAL; + } + + c = (unsigned long long)pv * duty_ns; + do_div(c, period_ns); + dc = c; + + writel(prescale, vt8500->base + REG_SCALAR(pwm->hwpwm)); + pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_SCALAR_UPDATE); + + writel(pv, vt8500->base + REG_PERIOD(pwm->hwpwm)); + pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_PERIOD_UPDATE); + + writel(dc, vt8500->base + REG_DUTY(pwm->hwpwm)); + pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_DUTY_UPDATE); + + val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); + val |= CTRL_AUTOLOAD; + writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); + pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE); + + clk_disable(vt8500->clk); + return 0; +} + +static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct vt8500_chip *vt8500 = to_vt8500_chip(chip); + int err; + u32 val; + + err = clk_enable(vt8500->clk); + if (err < 0) { + dev_err(chip->dev, "failed to enable clock\n"); + return err; + } + + val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); + val |= CTRL_ENABLE; + writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); + pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE); + + return 0; +} + +static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct vt8500_chip *vt8500 = to_vt8500_chip(chip); + u32 val; + + val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); + val &= ~CTRL_ENABLE; + writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); + pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE); + + clk_disable(vt8500->clk); +} + +static int vt8500_pwm_set_polarity(struct pwm_chip *chip, + struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct vt8500_chip *vt8500 = to_vt8500_chip(chip); + u32 val; + + val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); + + if (polarity == PWM_POLARITY_INVERSED) + val |= CTRL_INVERT; + else + val &= ~CTRL_INVERT; + + writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); + pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE); + + return 0; +} + +static struct pwm_ops vt8500_pwm_ops = { + .enable = vt8500_pwm_enable, + .disable = vt8500_pwm_disable, + .config = vt8500_pwm_config, + .set_polarity = vt8500_pwm_set_polarity, + .owner = THIS_MODULE, +}; + +static const struct of_device_id vt8500_pwm_dt_ids[] = { + { .compatible = "via,vt8500-pwm", }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids); + +static int vt8500_pwm_probe(struct platform_device *pdev) +{ + struct vt8500_chip *chip; + struct resource *r; + struct device_node *np = pdev->dev.of_node; + int ret; + + if (!np) { + dev_err(&pdev->dev, "invalid devicetree node\n"); + return -EINVAL; + } + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (chip == NULL) + return -ENOMEM; + + chip->chip.dev = &pdev->dev; + chip->chip.ops = &vt8500_pwm_ops; + chip->chip.of_xlate = of_pwm_xlate_with_flags; + chip->chip.of_pwm_n_cells = 3; + chip->chip.base = -1; + chip->chip.npwm = VT8500_NR_PWMS; + + chip->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(chip->clk)) { + dev_err(&pdev->dev, "clock source not specified\n"); + return PTR_ERR(chip->clk); + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + chip->base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(chip->base)) + return PTR_ERR(chip->base); + + ret = clk_prepare(chip->clk); + if (ret < 0) { + dev_err(&pdev->dev, "failed to prepare clock\n"); + return ret; + } + + ret = pwmchip_add(&chip->chip); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add PWM chip\n"); + return ret; + } + + platform_set_drvdata(pdev, chip); + return ret; +} + +static int vt8500_pwm_remove(struct platform_device *pdev) +{ + struct vt8500_chip *chip; + + chip = platform_get_drvdata(pdev); + if (chip == NULL) + return -ENODEV; + + clk_unprepare(chip->clk); + + return pwmchip_remove(&chip->chip); +} + +static struct platform_driver vt8500_pwm_driver = { + .probe = vt8500_pwm_probe, + .remove = vt8500_pwm_remove, + .driver = { + .name = "vt8500-pwm", + .of_match_table = vt8500_pwm_dt_ids, + }, +}; +module_platform_driver(vt8500_pwm_driver); + +MODULE_DESCRIPTION("VT8500 PWM Driver"); +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c new file mode 100644 index 000000000..4bd0c639e --- /dev/null +++ b/drivers/pwm/sysfs.c @@ -0,0 +1,347 @@ +/* + * A simple sysfs interface for the generic PWM framework + * + * Copyright (C) 2013 H Hartley Sweeten <hsweeten@visionengravers.com> + * + * Based on previous work by Lars Poeschel <poeschel@lemonage.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/kdev_t.h> +#include <linux/pwm.h> + +struct pwm_export { + struct device child; + struct pwm_device *pwm; +}; + +static struct pwm_export *child_to_pwm_export(struct device *child) +{ + return container_of(child, struct pwm_export, child); +} + +static struct pwm_device *child_to_pwm_device(struct device *child) +{ + struct pwm_export *export = child_to_pwm_export(child); + + return export->pwm; +} + +static ssize_t pwm_period_show(struct device *child, + struct device_attribute *attr, + char *buf) +{ + const struct pwm_device *pwm = child_to_pwm_device(child); + + return sprintf(buf, "%u\n", pwm->period); +} + +static ssize_t pwm_period_store(struct device *child, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct pwm_device *pwm = child_to_pwm_device(child); + unsigned int val; + int ret; + + ret = kstrtouint(buf, 0, &val); + if (ret) + return ret; + + ret = pwm_config(pwm, pwm->duty_cycle, val); + + return ret ? : size; +} + +static ssize_t pwm_duty_cycle_show(struct device *child, + struct device_attribute *attr, + char *buf) +{ + const struct pwm_device *pwm = child_to_pwm_device(child); + + return sprintf(buf, "%u\n", pwm->duty_cycle); +} + +static ssize_t pwm_duty_cycle_store(struct device *child, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct pwm_device *pwm = child_to_pwm_device(child); + unsigned int val; + int ret; + + ret = kstrtouint(buf, 0, &val); + if (ret) + return ret; + + ret = pwm_config(pwm, val, pwm->period); + + return ret ? : size; +} + +static ssize_t pwm_enable_show(struct device *child, + struct device_attribute *attr, + char *buf) +{ + const struct pwm_device *pwm = child_to_pwm_device(child); + int enabled = test_bit(PWMF_ENABLED, &pwm->flags); + + return sprintf(buf, "%d\n", enabled); +} + +static ssize_t pwm_enable_store(struct device *child, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct pwm_device *pwm = child_to_pwm_device(child); + int val, ret; + + ret = kstrtoint(buf, 0, &val); + if (ret) + return ret; + + switch (val) { + case 0: + pwm_disable(pwm); + break; + case 1: + ret = pwm_enable(pwm); + break; + default: + ret = -EINVAL; + break; + } + + return ret ? : size; +} + +static ssize_t pwm_polarity_show(struct device *child, + struct device_attribute *attr, + char *buf) +{ + const struct pwm_device *pwm = child_to_pwm_device(child); + + return sprintf(buf, "%s\n", pwm->polarity ? "inversed" : "normal"); +} + +static ssize_t pwm_polarity_store(struct device *child, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct pwm_device *pwm = child_to_pwm_device(child); + enum pwm_polarity polarity; + int ret; + + if (sysfs_streq(buf, "normal")) + polarity = PWM_POLARITY_NORMAL; + else if (sysfs_streq(buf, "inversed")) + polarity = PWM_POLARITY_INVERSED; + else + return -EINVAL; + + ret = pwm_set_polarity(pwm, polarity); + + return ret ? : size; +} + +static DEVICE_ATTR(period, 0644, pwm_period_show, pwm_period_store); +static DEVICE_ATTR(duty_cycle, 0644, pwm_duty_cycle_show, pwm_duty_cycle_store); +static DEVICE_ATTR(enable, 0644, pwm_enable_show, pwm_enable_store); +static DEVICE_ATTR(polarity, 0644, pwm_polarity_show, pwm_polarity_store); + +static struct attribute *pwm_attrs[] = { + &dev_attr_period.attr, + &dev_attr_duty_cycle.attr, + &dev_attr_enable.attr, + &dev_attr_polarity.attr, + NULL +}; +ATTRIBUTE_GROUPS(pwm); + +static void pwm_export_release(struct device *child) +{ + struct pwm_export *export = child_to_pwm_export(child); + + kfree(export); +} + +static int pwm_export_child(struct device *parent, struct pwm_device *pwm) +{ + struct pwm_export *export; + int ret; + + if (test_and_set_bit(PWMF_EXPORTED, &pwm->flags)) + return -EBUSY; + + export = kzalloc(sizeof(*export), GFP_KERNEL); + if (!export) { + clear_bit(PWMF_EXPORTED, &pwm->flags); + return -ENOMEM; + } + + export->pwm = pwm; + + export->child.release = pwm_export_release; + export->child.parent = parent; + export->child.devt = MKDEV(0, 0); + export->child.groups = pwm_groups; + dev_set_name(&export->child, "pwm%u", pwm->hwpwm); + + ret = device_register(&export->child); + if (ret) { + clear_bit(PWMF_EXPORTED, &pwm->flags); + kfree(export); + return ret; + } + + return 0; +} + +static int pwm_unexport_match(struct device *child, void *data) +{ + return child_to_pwm_device(child) == data; +} + +static int pwm_unexport_child(struct device *parent, struct pwm_device *pwm) +{ + struct device *child; + + if (!test_and_clear_bit(PWMF_EXPORTED, &pwm->flags)) + return -ENODEV; + + child = device_find_child(parent, pwm, pwm_unexport_match); + if (!child) + return -ENODEV; + + /* for device_find_child() */ + put_device(child); + device_unregister(child); + pwm_put(pwm); + + return 0; +} + +static ssize_t pwm_export_store(struct device *parent, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct pwm_chip *chip = dev_get_drvdata(parent); + struct pwm_device *pwm; + unsigned int hwpwm; + int ret; + + ret = kstrtouint(buf, 0, &hwpwm); + if (ret < 0) + return ret; + + if (hwpwm >= chip->npwm) + return -ENODEV; + + pwm = pwm_request_from_chip(chip, hwpwm, "sysfs"); + if (IS_ERR(pwm)) + return PTR_ERR(pwm); + + ret = pwm_export_child(parent, pwm); + if (ret < 0) + pwm_put(pwm); + + return ret ? : len; +} +static DEVICE_ATTR(export, 0200, NULL, pwm_export_store); + +static ssize_t pwm_unexport_store(struct device *parent, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct pwm_chip *chip = dev_get_drvdata(parent); + unsigned int hwpwm; + int ret; + + ret = kstrtouint(buf, 0, &hwpwm); + if (ret < 0) + return ret; + + if (hwpwm >= chip->npwm) + return -ENODEV; + + ret = pwm_unexport_child(parent, &chip->pwms[hwpwm]); + + return ret ? : len; +} +static DEVICE_ATTR(unexport, 0200, NULL, pwm_unexport_store); + +static ssize_t npwm_show(struct device *parent, struct device_attribute *attr, + char *buf) +{ + const struct pwm_chip *chip = dev_get_drvdata(parent); + + return sprintf(buf, "%u\n", chip->npwm); +} +static DEVICE_ATTR_RO(npwm); + +static struct attribute *pwm_chip_attrs[] = { + &dev_attr_export.attr, + &dev_attr_unexport.attr, + &dev_attr_npwm.attr, + NULL, +}; +ATTRIBUTE_GROUPS(pwm_chip); + +static struct class pwm_class = { + .name = "pwm", + .owner = THIS_MODULE, + .dev_groups = pwm_chip_groups, +}; + +static int pwmchip_sysfs_match(struct device *parent, const void *data) +{ + return dev_get_drvdata(parent) == data; +} + +void pwmchip_sysfs_export(struct pwm_chip *chip) +{ + struct device *parent; + + /* + * If device_create() fails the pwm_chip is still usable by + * the kernel its just not exported. + */ + parent = device_create(&pwm_class, chip->dev, MKDEV(0, 0), chip, + "pwmchip%d", chip->base); + if (IS_ERR(parent)) { + dev_warn(chip->dev, + "device_create failed for pwm_chip sysfs export\n"); + } +} + +void pwmchip_sysfs_unexport(struct pwm_chip *chip) +{ + struct device *parent; + + parent = class_find_device(&pwm_class, NULL, chip, + pwmchip_sysfs_match); + if (parent) { + /* for class_find_device() */ + put_device(parent); + device_unregister(parent); + } +} + +static int __init pwm_sysfs_init(void) +{ + return class_register(&pwm_class); +} +subsys_initcall(pwm_sysfs_init); |