summaryrefslogtreecommitdiff
path: root/drivers/rtc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc')
-rw-r--r--drivers/rtc/Kconfig252
-rw-r--r--drivers/rtc/Makefile5
-rw-r--r--drivers/rtc/class.c13
-rw-r--r--drivers/rtc/interface.c54
-rw-r--r--drivers/rtc/rtc-abx80x.c252
-rw-r--r--drivers/rtc/rtc-as3722.c2
-rw-r--r--drivers/rtc/rtc-asm9260.c355
-rw-r--r--drivers/rtc/rtc-ds1305.c4
-rw-r--r--drivers/rtc/rtc-ds1307.c411
-rw-r--r--drivers/rtc/rtc-ds1685.c1
-rw-r--r--drivers/rtc/rtc-ds3232.c476
-rw-r--r--drivers/rtc/rtc-ds3234.c171
-rw-r--r--drivers/rtc/rtc-generic.c12
-rw-r--r--drivers/rtc/rtc-m41t80.c6
-rw-r--r--drivers/rtc/rtc-max77686.c563
-rw-r--r--drivers/rtc/rtc-max77802.c502
-rw-r--r--drivers/rtc/rtc-mcp795.c10
-rw-r--r--drivers/rtc/rtc-mt6397.c1
-rw-r--r--drivers/rtc/rtc-palmas.c3
-rw-r--r--drivers/rtc/rtc-pcf2123.c271
-rw-r--r--drivers/rtc/rtc-pcf2127.c335
-rw-r--r--drivers/rtc/rtc-pcf85063.c162
-rw-r--r--drivers/rtc/rtc-pcf8523.c25
-rw-r--r--drivers/rtc/rtc-pic32.c411
-rw-r--r--drivers/rtc/rtc-rv3029c2.c723
-rw-r--r--drivers/rtc/rtc-rv8803.c67
-rw-r--r--drivers/rtc/rtc-rx6110.c402
-rw-r--r--drivers/rtc/rtc-rx8025.c26
-rw-r--r--drivers/rtc/rtc-s3c.c19
-rw-r--r--drivers/rtc/rtc-s5m.c8
-rw-r--r--drivers/rtc/rtc-sysfs.c35
-rw-r--r--drivers/rtc/rtc-tps6586x.c2
-rw-r--r--drivers/rtc/rtc-tps65910.c2
-rw-r--r--drivers/rtc/rtc-tps80031.c2
34 files changed, 4015 insertions, 1568 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 376322f71..3e84315c6 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -140,7 +140,6 @@ config RTC_DRV_TEST
will be called rtc-test.
comment "I2C RTC drivers"
- depends on I2C
if I2C
@@ -212,6 +211,15 @@ config RTC_DRV_DS1307
This driver can also be built as a module. If so, the module
will be called rtc-ds1307.
+config RTC_DRV_DS1307_HWMON
+ bool "HWMON support for rtc-ds1307"
+ depends on RTC_DRV_DS1307 && HWMON
+ depends on !(RTC_DRV_DS1307=y && HWMON=m)
+ default y
+ help
+ Say Y here if you want to expose temperature sensor data on
+ rtc-ds1307 (only DS3231)
+
config RTC_DRV_DS1374
tristate "Dallas/Maxim DS1374"
help
@@ -239,16 +247,6 @@ config RTC_DRV_DS1672
This driver can also be built as a module. If so, the module
will be called rtc-ds1672.
-config RTC_DRV_DS3232
- tristate "Dallas/Maxim DS3232"
- help
- If you say yes here you get support for Dallas Semiconductor
- DS3232 real-time clock chips. If an interrupt is associated
- with the device, the alarm functionality is supported.
-
- This driver can also be built as a module. If so, the module
- will be called rtc-ds3232.
-
config RTC_DRV_HYM8563
tristate "Haoyu Microelectronics HYM8563"
depends on OF
@@ -317,10 +315,10 @@ config RTC_DRV_MAX8997
config RTC_DRV_MAX77686
tristate "Maxim MAX77686"
- depends on MFD_MAX77686
+ depends on MFD_MAX77686 || MFD_MAX77620
help
If you say yes here you will get support for the
- RTC of Maxim MAX77686 PMIC.
+ RTC of Maxim MAX77686/MAX77620/MAX77802 PMIC.
This driver can also be built as a module. If so, the module
will be called rtc-max77686.
@@ -335,16 +333,6 @@ config RTC_DRV_RK808
This driver can also be built as a module. If so, the module
will be called rk808-rtc.
-config RTC_DRV_MAX77802
- tristate "Maxim 77802 RTC"
- depends on MFD_MAX77686
- help
- If you say yes here you will get support for the
- RTC of Maxim MAX77802 PMIC.
-
- This driver can also be built as a module. If so, the module
- will be called rtc-max77802.
-
config RTC_DRV_RS5C372
tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
help
@@ -391,25 +379,6 @@ config RTC_DRV_X1205
This driver can also be built as a module. If so, the module
will be called rtc-x1205.
-config RTC_DRV_PALMAS
- tristate "TI Palmas RTC driver"
- depends on MFD_PALMAS
- help
- If you say yes here you get support for the RTC of TI PALMA series PMIC
- chips.
-
- This driver can also be built as a module. If so, the module
- will be called rtc-palma.
-
-config RTC_DRV_PCF2127
- tristate "NXP PCF2127"
- help
- If you say yes here you get support for the NXP PCF2127/29 RTC
- chips.
-
- This driver can also be built as a module. If so, the module
- will be called rtc-pcf2127.
-
config RTC_DRV_PCF8523
tristate "NXP PCF8523"
help
@@ -419,6 +388,14 @@ config RTC_DRV_PCF8523
This driver can also be built as a module. If so, the module
will be called rtc-pcf8523.
+config RTC_DRV_PCF85063
+ tristate "NXP PCF85063"
+ help
+ If you say yes here you get support for the PCF85063 RTC chip
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pcf85063.
+
config RTC_DRV_PCF8563
tristate "Philips PCF8563/Epson RTC8564"
help
@@ -429,14 +406,6 @@ config RTC_DRV_PCF8563
This driver can also be built as a module. If so, the module
will be called rtc-pcf8563.
-config RTC_DRV_PCF85063
- tristate "nxp PCF85063"
- help
- If you say yes here you get support for the PCF85063 RTC chip
-
- This driver can also be built as a module. If so, the module
- will be called rtc-pcf85063.
-
config RTC_DRV_PCF8583
tristate "Philips PCF8583"
help
@@ -501,6 +470,16 @@ config RTC_DRV_TWL4030
This driver can also be built as a module. If so, the module
will be called rtc-twl.
+config RTC_DRV_PALMAS
+ tristate "TI Palmas RTC driver"
+ depends on MFD_PALMAS
+ help
+ If you say yes here you get support for the RTC of TI PALMA series PMIC
+ chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-palma.
+
config RTC_DRV_TPS6586X
tristate "TI TPS6586X RTC driver"
depends on MFD_TPS6586X
@@ -595,14 +574,23 @@ config RTC_DRV_EM3027
will be called rtc-em3027.
config RTC_DRV_RV3029C2
- tristate "Micro Crystal RTC"
+ tristate "Micro Crystal RV3029"
help
If you say yes here you get support for the Micro Crystal
- RV3029-C2 RTC chips.
+ RV3029 RTC chips.
This driver can also be built as a module. If so, the module
will be called rtc-rv3029c2.
+config RTC_DRV_RV3029_HWMON
+ bool "HWMON support for RV3029"
+ depends on RTC_DRV_RV3029C2 && HWMON
+ depends on !(RTC_DRV_RV3029C2=y && HWMON=m)
+ default y
+ help
+ Say Y here if you want to expose temperature sensor data on
+ rtc-rv3029.
+
config RTC_DRV_RV8803
tristate "Micro Crystal RV8803"
help
@@ -691,15 +679,6 @@ config RTC_DRV_DS1390
This driver can also be built as a module. If so, the module
will be called rtc-ds1390.
-config RTC_DRV_MAX6902
- tristate "Maxim MAX6902"
- help
- If you say yes here you will get support for the
- Maxim MAX6902 SPI RTC chip.
-
- This driver can also be built as a module. If so, the module
- will be called rtc-max6902.
-
config RTC_DRV_R9701
tristate "Epson RTC-9701JE"
help
@@ -709,6 +688,23 @@ config RTC_DRV_R9701
This driver can also be built as a module. If so, the module
will be called rtc-r9701.
+config RTC_DRV_RX4581
+ tristate "Epson RX-4581"
+ help
+ If you say yes here you will get support for the Epson RX-4581.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-rx4581.
+
+config RTC_DRV_RX6110
+ tristate "Epson RX-6110"
+ select REGMAP_SPI
+ help
+ If you say yes here you will get support for the Epson RX-6610.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-rx6110.
+
config RTC_DRV_RS5C348
tristate "Ricoh RS5C348A/B"
help
@@ -718,14 +714,14 @@ config RTC_DRV_RS5C348
This driver can also be built as a module. If so, the module
will be called rtc-rs5c348.
-config RTC_DRV_DS3234
- tristate "Maxim/Dallas DS3234"
+config RTC_DRV_MAX6902
+ tristate "Maxim MAX6902"
help
- If you say yes here you get support for the
- Maxim/Dallas DS3234 SPI RTC chip.
+ If you say yes here you will get support for the
+ Maxim MAX6902 SPI RTC chip.
This driver can also be built as a module. If so, the module
- will be called rtc-ds3234.
+ will be called rtc-max6902.
config RTC_DRV_PCF2123
tristate "NXP PCF2123"
@@ -736,14 +732,6 @@ config RTC_DRV_PCF2123
This driver can also be built as a module. If so, the module
will be called rtc-pcf2123.
-config RTC_DRV_RX4581
- tristate "Epson RX-4581"
- help
- If you say yes here you will get support for the Epson RX-4581.
-
- This driver can also be built as a module. If so the module
- will be called rtc-rx4581.
-
config RTC_DRV_MCP795
tristate "Microchip MCP795"
help
@@ -754,6 +742,41 @@ config RTC_DRV_MCP795
endif # SPI_MASTER
+#
+# Helper to resolve issues with configs that have SPI enabled but I2C
+# modular. See SND_SOC_I2C_AND_SPI for more information
+#
+config RTC_I2C_AND_SPI
+ tristate
+ default m if I2C=m
+ default y if I2C=y
+ default y if SPI_MASTER=y
+ select REGMAP_I2C if I2C
+ select REGMAP_SPI if SPI_MASTER
+
+comment "SPI and I2C RTC drivers"
+
+config RTC_DRV_DS3232
+ tristate "Dallas/Maxim DS3232/DS3234"
+ depends on RTC_I2C_AND_SPI
+ help
+ If you say yes here you get support for Dallas Semiconductor
+ DS3232 and DS3234 real-time clock chips. If an interrupt is associated
+ with the device, the alarm functionality is supported.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds3232.
+
+config RTC_DRV_PCF2127
+ tristate "NXP PCF2127"
+ depends on RTC_I2C_AND_SPI
+ help
+ If you say yes here you get support for the NXP PCF2127/29 RTC
+ chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pcf2127.
+
comment "Platform RTC drivers"
# this 'CMOS' RTC driver is arch dependent because <asm-generic/rtc.h>
@@ -1087,7 +1110,7 @@ config RTC_DRV_WM8350
config RTC_DRV_SPEAR
tristate "SPEAR ST RTC"
- depends on PLAT_SPEAR
+ depends on PLAT_SPEAR || COMPILE_TEST
default y
help
If you say Y here you will get support for the RTC found on
@@ -1119,7 +1142,7 @@ config RTC_DRV_AB8500
config RTC_DRV_NUC900
tristate "NUC910/NUC920 RTC driver"
- depends on ARCH_W90X900
+ depends on ARCH_W90X900 || COMPILE_TEST
help
If you say yes here you get support for the RTC subsystem of the
NUC910/NUC920 used in embedded systems.
@@ -1144,9 +1167,19 @@ config RTC_DRV_ZYNQMP
comment "on-CPU RTC drivers"
+config RTC_DRV_ASM9260
+ tristate "Alphascale asm9260 RTC"
+ depends on MACH_ASM9260
+ help
+ If you say yes here you get support for the RTC on the
+ Alphascale asm9260 SoC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-asm9260.
+
config RTC_DRV_DAVINCI
tristate "TI DaVinci RTC"
- depends on ARCH_DAVINCI_DM365
+ depends on ARCH_DAVINCI_DM365 || COMPILE_TEST
help
If you say yes here you get support for the RTC on the
DaVinci platforms (DM365).
@@ -1156,7 +1189,7 @@ config RTC_DRV_DAVINCI
config RTC_DRV_DIGICOLOR
tristate "Conexant Digicolor RTC"
- depends on ARCH_DIGICOLOR
+ depends on ARCH_DIGICOLOR || COMPILE_TEST
help
If you say yes here you get support for the RTC on Conexant
Digicolor platforms. This currently includes the CX92755 SoC.
@@ -1175,7 +1208,7 @@ config RTC_DRV_IMXDI
config RTC_DRV_OMAP
tristate "TI OMAP Real Time Clock"
- depends on ARCH_OMAP || ARCH_DAVINCI
+ depends on ARCH_OMAP || ARCH_DAVINCI || COMPILE_TEST
help
Say "yes" here to support the on chip real time clock
present on TI OMAP1, AM33xx, DA8xx/OMAP-L13x, AM43xx and DRA7xx.
@@ -1192,7 +1225,7 @@ config HAVE_S3C_RTC
config RTC_DRV_S3C
tristate "Samsung S3C series SoC RTC"
- depends on ARCH_S3C64XX || HAVE_S3C_RTC
+ depends on ARCH_S3C64XX || HAVE_S3C_RTC || COMPILE_TEST
help
RTC (Realtime Clock) driver for the clock inbuilt into the
Samsung S3C24XX series of SoCs. This can provide periodic
@@ -1208,7 +1241,7 @@ config RTC_DRV_S3C
config RTC_DRV_EP93XX
tristate "Cirrus Logic EP93XX"
- depends on ARCH_EP93XX
+ depends on ARCH_EP93XX || COMPILE_TEST
help
If you say yes here you get support for the
RTC embedded in the Cirrus Logic EP93XX processors.
@@ -1238,7 +1271,7 @@ config RTC_DRV_SH
config RTC_DRV_VR41XX
tristate "NEC VR41XX"
- depends on CPU_VR41XX
+ depends on CPU_VR41XX || COMPILE_TEST
help
If you say Y here you will get access to the real time clock
built into your NEC VR41XX CPU.
@@ -1268,14 +1301,14 @@ config RTC_DRV_PL031
config RTC_DRV_AT32AP700X
tristate "AT32AP700X series RTC"
- depends on PLATFORM_AT32AP
+ depends on PLATFORM_AT32AP || COMPILE_TEST
help
Driver for the internal RTC (Realtime Clock) on Atmel AVR32
AT32AP700x family processors.
config RTC_DRV_AT91RM9200
tristate "AT91RM9200 or some AT91SAM9 RTC"
- depends on ARCH_AT91
+ depends on ARCH_AT91 || COMPILE_TEST
help
Driver for the internal RTC (Realtime Clock) module found on
Atmel AT91RM9200's and some AT91SAM9 chips. On AT91SAM9 chips
@@ -1283,7 +1316,7 @@ config RTC_DRV_AT91RM9200
config RTC_DRV_AT91SAM9
tristate "AT91SAM9 RTT as RTC"
- depends on ARCH_AT91
+ depends on ARCH_AT91 || COMPILE_TEST
select MFD_SYSCON
help
Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
@@ -1325,17 +1358,17 @@ config RTC_DRV_GENERIC
tristate "Generic RTC support"
# Please consider writing a new RTC driver instead of using the generic
# RTC abstraction
- depends on PARISC || M68K || PPC || SUPERH32
+ depends on PARISC || M68K || PPC || SUPERH32 || COMPILE_TEST
help
Say Y or M here to enable RTC support on systems using the generic
RTC abstraction. If you do not know what you are doing, you should
just say Y.
config RTC_DRV_PXA
- tristate "PXA27x/PXA3xx"
- depends on ARCH_PXA
- select RTC_DRV_SA1100
- help
+ tristate "PXA27x/PXA3xx"
+ depends on ARCH_PXA
+ select RTC_DRV_SA1100
+ help
If you say Y here you will get access to the real time clock
built into your PXA27x or PXA3xx CPU. This RTC is actually 2 RTCs
consisting of an SA1100 compatible RTC and the extended PXA RTC.
@@ -1345,7 +1378,7 @@ config RTC_DRV_PXA
config RTC_DRV_VT8500
tristate "VIA/WonderMedia 85xx SoC RTC"
- depends on ARCH_VT8500
+ depends on ARCH_VT8500 || COMPILE_TEST
help
If you say Y here you will get access to the real time clock
built into your VIA VT8500 SoC or its relatives.
@@ -1360,14 +1393,15 @@ config RTC_DRV_SUN4V
config RTC_DRV_SUN6I
tristate "Allwinner A31 RTC"
- depends on MACH_SUN6I || MACH_SUN8I
+ default MACH_SUN6I || MACH_SUN8I || COMPILE_TEST
+ depends on ARCH_SUNXI
help
- If you say Y here you will get support for the RTC found on
- Allwinner A31.
+ If you say Y here you will get support for the RTC found in
+ some Allwinner SoCs like the A31 or the A64.
config RTC_DRV_SUNXI
tristate "Allwinner sun4i/sun7i RTC"
- depends on MACH_SUN4I || MACH_SUN7I
+ depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
help
If you say Y here you will get support for the RTC found on
Allwinner A10/A20.
@@ -1388,7 +1422,7 @@ config RTC_DRV_TX4939
config RTC_DRV_MV
tristate "Marvell SoC RTC"
- depends on ARCH_DOVE || ARCH_MVEBU
+ depends on ARCH_DOVE || ARCH_MVEBU || COMPILE_TEST
help
If you say yes here you will get support for the in-chip RTC
that can be found in some of Marvell's SoC devices, such as
@@ -1399,7 +1433,7 @@ config RTC_DRV_MV
config RTC_DRV_ARMADA38X
tristate "Armada 38x Marvell SoC RTC"
- depends on ARCH_MVEBU
+ depends on ARCH_MVEBU || COMPILE_TEST
help
If you say yes here you will get support for the in-chip RTC
that can be found in the Armada 38x Marvell's SoC device
@@ -1429,7 +1463,7 @@ config RTC_DRV_PS3
config RTC_DRV_COH901331
tristate "ST-Ericsson COH 901 331 RTC"
- depends on ARCH_U300
+ depends on ARCH_U300 || COMPILE_TEST
help
If you say Y here you will get access to ST-Ericsson
COH 901 331 RTC clock found in some ST-Ericsson Mobile
@@ -1441,7 +1475,7 @@ config RTC_DRV_COH901331
config RTC_DRV_STMP
tristate "Freescale STMP3xxx/i.MX23/i.MX28 RTC"
- depends on ARCH_MXS
+ depends on ARCH_MXS || COMPILE_TEST
select STMP_DEVICE
help
If you say yes here you will get support for the onboard
@@ -1476,7 +1510,7 @@ config RTC_DRV_MPC5121
config RTC_DRV_JZ4740
tristate "Ingenic JZ4740 SoC"
- depends on MACH_JZ4740
+ depends on MACH_JZ4740 || COMPILE_TEST
help
If you say yes here you get support for the Ingenic JZ4740 SoC RTC
controller.
@@ -1497,7 +1531,7 @@ config RTC_DRV_LPC24XX
so, the module will be called rtc-lpc24xx.
config RTC_DRV_LPC32XX
- depends on ARCH_LPC32XX
+ depends on ARCH_LPC32XX || COMPILE_TEST
tristate "NXP LPC32XX RTC"
help
This enables support for the NXP RTC in the LPC32XX
@@ -1507,7 +1541,7 @@ config RTC_DRV_LPC32XX
config RTC_DRV_PM8XXX
tristate "Qualcomm PMIC8XXX RTC"
- depends on MFD_PM8XXX || MFD_SPMI_PMIC
+ depends on MFD_PM8XXX || MFD_SPMI_PMIC || COMPILE_TEST
help
If you say yes here you get support for the
Qualcomm PMIC8XXX RTC.
@@ -1517,7 +1551,7 @@ config RTC_DRV_PM8XXX
config RTC_DRV_TEGRA
tristate "NVIDIA Tegra Internal RTC driver"
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA || COMPILE_TEST
help
If you say yes here you get support for the
Tegra 200 series internal RTC module.
@@ -1603,7 +1637,7 @@ config RTC_DRV_MOXART
config RTC_DRV_MT6397
tristate "Mediatek Real Time Clock driver"
- depends on MFD_MT6397 || COMPILE_TEST
+ depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
help
This selects the Mediatek(R) RTC driver. RTC is part of Mediatek
MT6397 PMIC. You should enable MT6397 PMIC MFD before select
@@ -1622,6 +1656,16 @@ config RTC_DRV_XGENE
This driver can also be built as a module, if so, the module
will be called "rtc-xgene".
+config RTC_DRV_PIC32
+ tristate "Microchip PIC32 RTC"
+ depends on MACH_PIC32
+ default y
+ help
+ If you say yes here you get support for the PIC32 RTC module.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pic32
+
comment "HID Sensor RTC drivers"
config RTC_DRV_HID_SENSOR_TIME
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 62d61b26c..ea2833723 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o
obj-$(CONFIG_RTC_DRV_ABX80X) += rtc-abx80x.o
obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o
obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o
+obj-$(CONFIG_RTC_DRV_ASM9260) += rtc-asm9260.o
obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
@@ -59,7 +60,6 @@ obj-$(CONFIG_RTC_DRV_DS1685_FAMILY) += rtc-ds1685.o
obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
obj-$(CONFIG_RTC_DRV_DS2404) += rtc-ds2404.o
obj-$(CONFIG_RTC_DRV_DS3232) += rtc-ds3232.o
-obj-$(CONFIG_RTC_DRV_DS3234) += rtc-ds3234.o
obj-$(CONFIG_RTC_DRV_EFI) += rtc-efi.o
obj-$(CONFIG_RTC_DRV_EM3027) += rtc-em3027.o
obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o
@@ -86,7 +86,6 @@ obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
obj-$(CONFIG_RTC_DRV_MAX77686) += rtc-max77686.o
-obj-$(CONFIG_RTC_DRV_MAX77802) += rtc-max77802.o
obj-$(CONFIG_RTC_DRV_MAX8907) += rtc-max8907.o
obj-$(CONFIG_RTC_DRV_MAX8925) += rtc-max8925.o
obj-$(CONFIG_RTC_DRV_MAX8997) += rtc-max8997.o
@@ -112,6 +111,7 @@ obj-$(CONFIG_RTC_DRV_PCF85063) += rtc-pcf85063.o
obj-$(CONFIG_RTC_DRV_PCF8523) += rtc-pcf8523.o
obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
+obj-$(CONFIG_RTC_DRV_PIC32) += rtc-pic32.o
obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
obj-$(CONFIG_RTC_DRV_PM8XXX) += rtc-pm8xxx.o
@@ -128,6 +128,7 @@ obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o
obj-$(CONFIG_RTC_DRV_RV8803) += rtc-rv8803.o
obj-$(CONFIG_RTC_DRV_RX4581) += rtc-rx4581.o
+obj-$(CONFIG_RTC_DRV_RX6110) += rtc-rx6110.o
obj-$(CONFIG_RTC_DRV_RX8010) += rtc-rx8010.o
obj-$(CONFIG_RTC_DRV_RX8025) += rtc-rx8025.o
obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index de86578bc..74fd9746a 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -361,17 +361,4 @@ static int __init rtc_init(void)
rtc_dev_init();
return 0;
}
-
-static void __exit rtc_exit(void)
-{
- rtc_dev_exit();
- class_destroy(rtc_class);
- ida_destroy(&rtc_ida);
-}
-
subsys_initcall(rtc_init);
-module_exit(rtc_exit);
-
-MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-MODULE_DESCRIPTION("RTC class support");
-MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 5836751b8..9ef5f6f89 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -939,4 +939,58 @@ void rtc_timer_cancel(struct rtc_device *rtc, struct rtc_timer *timer)
mutex_unlock(&rtc->ops_lock);
}
+/**
+ * rtc_read_offset - Read the amount of rtc offset in parts per billion
+ * @ rtc: rtc device to be used
+ * @ offset: the offset in parts per billion
+ *
+ * see below for details.
+ *
+ * Kernel interface to read rtc clock offset
+ * Returns 0 on success, or a negative number on error.
+ * If read_offset() is not implemented for the rtc, return -EINVAL
+ */
+int rtc_read_offset(struct rtc_device *rtc, long *offset)
+{
+ int ret;
+
+ if (!rtc->ops)
+ return -ENODEV;
+
+ if (!rtc->ops->read_offset)
+ return -EINVAL;
+
+ mutex_lock(&rtc->ops_lock);
+ ret = rtc->ops->read_offset(rtc->dev.parent, offset);
+ mutex_unlock(&rtc->ops_lock);
+ return ret;
+}
+/**
+ * rtc_set_offset - Adjusts the duration of the average second
+ * @ rtc: rtc device to be used
+ * @ offset: the offset in parts per billion
+ *
+ * Some rtc's allow an adjustment to the average duration of a second
+ * to compensate for differences in the actual clock rate due to temperature,
+ * the crystal, capacitor, etc.
+ *
+ * Kernel interface to adjust an rtc clock offset.
+ * Return 0 on success, or a negative number on error.
+ * If the rtc offset is not setable (or not implemented), return -EINVAL
+ */
+int rtc_set_offset(struct rtc_device *rtc, long offset)
+{
+ int ret;
+
+ if (!rtc->ops)
+ return -ENODEV;
+
+ if (!rtc->ops->set_offset)
+ return -EINVAL;
+
+ mutex_lock(&rtc->ops_lock);
+ ret = rtc->ops->set_offset(rtc->dev.parent, offset);
+ mutex_unlock(&rtc->ops_lock);
+ return ret;
+}
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index d41bbcd65..ba0d61934 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -49,7 +49,20 @@
#define ABX8XX_REG_CD_TIMER_CTL 0x18
+#define ABX8XX_REG_OSC 0x1c
+#define ABX8XX_OSC_FOS BIT(3)
+#define ABX8XX_OSC_BOS BIT(4)
+#define ABX8XX_OSC_ACAL_512 BIT(5)
+#define ABX8XX_OSC_ACAL_1024 BIT(6)
+
+#define ABX8XX_OSC_OSEL BIT(7)
+
+#define ABX8XX_REG_OSS 0x1d
+#define ABX8XX_OSS_OF BIT(1)
+#define ABX8XX_OSS_OMODE BIT(4)
+
#define ABX8XX_REG_CFG_KEY 0x1f
+#define ABX8XX_CFG_KEY_OSC 0xa1
#define ABX8XX_CFG_KEY_MISC 0x9d
#define ABX8XX_REG_ID0 0x28
@@ -81,6 +94,20 @@ static struct abx80x_cap abx80x_caps[] = {
[ABX80X] = {.pn = 0}
};
+static int abx80x_is_rc_mode(struct i2c_client *client)
+{
+ int flags = 0;
+
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
+ if (flags < 0) {
+ dev_err(&client->dev,
+ "Failed to read autocalibration attribute\n");
+ return flags;
+ }
+
+ return (flags & ABX8XX_OSS_OMODE) ? 1 : 0;
+}
+
static int abx80x_enable_trickle_charger(struct i2c_client *client,
u8 trickle_cfg)
{
@@ -112,7 +139,23 @@ static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct i2c_client *client = to_i2c_client(dev);
unsigned char buf[8];
- int err;
+ int err, flags, rc_mode = 0;
+
+ /* Read the Oscillator Failure only in XT mode */
+ rc_mode = abx80x_is_rc_mode(client);
+ if (rc_mode < 0)
+ return rc_mode;
+
+ if (!rc_mode) {
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
+ if (flags < 0)
+ return flags;
+
+ if (flags & ABX8XX_OSS_OF) {
+ dev_err(dev, "Oscillator failure, data is invalid.\n");
+ return -EINVAL;
+ }
+ }
err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH,
sizeof(buf), buf);
@@ -140,7 +183,7 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct i2c_client *client = to_i2c_client(dev);
unsigned char buf[8];
- int err;
+ int err, flags;
if (tm->tm_year < 100)
return -EINVAL;
@@ -161,6 +204,18 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
return -EIO;
}
+ /* Clear the OF bit of Oscillator Status Register */
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
+ if (flags < 0)
+ return flags;
+
+ err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSS,
+ flags & ~ABX8XX_OSS_OF);
+ if (err < 0) {
+ dev_err(&client->dev, "Unable to write oscillator status register\n");
+ return err;
+ }
+
return 0;
}
@@ -248,6 +303,174 @@ static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
return 0;
}
+static int abx80x_rtc_set_autocalibration(struct device *dev,
+ int autocalibration)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int retval, flags = 0;
+
+ if ((autocalibration != 0) && (autocalibration != 1024) &&
+ (autocalibration != 512)) {
+ dev_err(dev, "autocalibration value outside permitted range\n");
+ return -EINVAL;
+ }
+
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
+ if (flags < 0)
+ return flags;
+
+ if (autocalibration == 0) {
+ flags &= ~(ABX8XX_OSC_ACAL_512 | ABX8XX_OSC_ACAL_1024);
+ } else if (autocalibration == 1024) {
+ /* 1024 autocalibration is 0x10 */
+ flags |= ABX8XX_OSC_ACAL_1024;
+ flags &= ~(ABX8XX_OSC_ACAL_512);
+ } else {
+ /* 512 autocalibration is 0x11 */
+ flags |= (ABX8XX_OSC_ACAL_1024 | ABX8XX_OSC_ACAL_512);
+ }
+
+ /* Unlock write access to Oscillator Control Register */
+ retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
+ ABX8XX_CFG_KEY_OSC);
+ if (retval < 0) {
+ dev_err(dev, "Failed to write CONFIG_KEY register\n");
+ return retval;
+ }
+
+ retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
+
+ return retval;
+}
+
+static int abx80x_rtc_get_autocalibration(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int flags = 0, autocalibration;
+
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
+ if (flags < 0)
+ return flags;
+
+ if (flags & ABX8XX_OSC_ACAL_512)
+ autocalibration = 512;
+ else if (flags & ABX8XX_OSC_ACAL_1024)
+ autocalibration = 1024;
+ else
+ autocalibration = 0;
+
+ return autocalibration;
+}
+
+static ssize_t autocalibration_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int retval;
+ unsigned long autocalibration = 0;
+
+ retval = kstrtoul(buf, 10, &autocalibration);
+ if (retval < 0) {
+ dev_err(dev, "Failed to store RTC autocalibration attribute\n");
+ return -EINVAL;
+ }
+
+ retval = abx80x_rtc_set_autocalibration(dev, autocalibration);
+
+ return retval ? retval : count;
+}
+
+static ssize_t autocalibration_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int autocalibration = 0;
+
+ autocalibration = abx80x_rtc_get_autocalibration(dev);
+ if (autocalibration < 0) {
+ dev_err(dev, "Failed to read RTC autocalibration\n");
+ sprintf(buf, "0\n");
+ return autocalibration;
+ }
+
+ return sprintf(buf, "%d\n", autocalibration);
+}
+
+static DEVICE_ATTR_RW(autocalibration);
+
+static ssize_t oscillator_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int retval, flags, rc_mode = 0;
+
+ if (strncmp(buf, "rc", 2) == 0) {
+ rc_mode = 1;
+ } else if (strncmp(buf, "xtal", 4) == 0) {
+ rc_mode = 0;
+ } else {
+ dev_err(dev, "Oscillator selection value outside permitted ones\n");
+ return -EINVAL;
+ }
+
+ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
+ if (flags < 0)
+ return flags;
+
+ if (rc_mode == 0)
+ flags &= ~(ABX8XX_OSC_OSEL);
+ else
+ flags |= (ABX8XX_OSC_OSEL);
+
+ /* Unlock write access on Oscillator Control register */
+ retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
+ ABX8XX_CFG_KEY_OSC);
+ if (retval < 0) {
+ dev_err(dev, "Failed to write CONFIG_KEY register\n");
+ return retval;
+ }
+
+ retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
+ if (retval < 0) {
+ dev_err(dev, "Failed to write Oscillator Control register\n");
+ return retval;
+ }
+
+ return retval ? retval : count;
+}
+
+static ssize_t oscillator_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int rc_mode = 0;
+ struct i2c_client *client = to_i2c_client(dev);
+
+ rc_mode = abx80x_is_rc_mode(client);
+
+ if (rc_mode < 0) {
+ dev_err(dev, "Failed to read RTC oscillator selection\n");
+ sprintf(buf, "\n");
+ return rc_mode;
+ }
+
+ if (rc_mode)
+ return sprintf(buf, "rc\n");
+ else
+ return sprintf(buf, "xtal\n");
+}
+
+static DEVICE_ATTR_RW(oscillator);
+
+static struct attribute *rtc_calib_attrs[] = {
+ &dev_attr_autocalibration.attr,
+ &dev_attr_oscillator.attr,
+ NULL,
+};
+
+static const struct attribute_group rtc_calib_attr_group = {
+ .attrs = rtc_calib_attrs,
+};
+
static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -303,6 +526,13 @@ static int abx80x_dt_trickle_cfg(struct device_node *np)
return (trickle_cfg | i);
}
+static void rtc_calib_remove_sysfs_group(void *_dev)
+{
+ struct device *dev = _dev;
+
+ sysfs_remove_group(&dev->kobj, &rtc_calib_attr_group);
+}
+
static int abx80x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -405,6 +635,24 @@ static int abx80x_probe(struct i2c_client *client,
}
}
+ /* Export sysfs entries */
+ err = sysfs_create_group(&(&client->dev)->kobj, &rtc_calib_attr_group);
+ if (err) {
+ dev_err(&client->dev, "Failed to create sysfs group: %d\n",
+ err);
+ return err;
+ }
+
+ err = devm_add_action(&client->dev, rtc_calib_remove_sysfs_group,
+ &client->dev);
+ if (err) {
+ rtc_calib_remove_sysfs_group(&client->dev);
+ dev_err(&client->dev,
+ "Failed to add sysfs cleanup action: %d\n",
+ err);
+ return err;
+ }
+
return 0;
}
diff --git a/drivers/rtc/rtc-as3722.c b/drivers/rtc/rtc-as3722.c
index 56cc58211..6ef0c887e 100644
--- a/drivers/rtc/rtc-as3722.c
+++ b/drivers/rtc/rtc-as3722.c
@@ -210,7 +210,7 @@ static int as3722_rtc_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "RTC interrupt %d\n", as3722_rtc->alarm_irq);
ret = devm_request_threaded_irq(&pdev->dev, as3722_rtc->alarm_irq, NULL,
- as3722_alarm_irq, IRQF_ONESHOT | IRQF_EARLY_RESUME,
+ as3722_alarm_irq, IRQF_ONESHOT,
"rtc-alarm", as3722_rtc);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
diff --git a/drivers/rtc/rtc-asm9260.c b/drivers/rtc/rtc-asm9260.c
new file mode 100644
index 000000000..355fdb97a
--- /dev/null
+++ b/drivers/rtc/rtc-asm9260.c
@@ -0,0 +1,355 @@
+/*
+ * Copyright (C) 2016 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+/* Miscellaneous registers */
+/* Interrupt Location Register */
+#define HW_ILR 0x00
+#define BM_RTCALF BIT(1)
+#define BM_RTCCIF BIT(0)
+
+/* Clock Control Register */
+#define HW_CCR 0x08
+/* Calibration counter disable */
+#define BM_CCALOFF BIT(4)
+/* Reset internal oscillator divider */
+#define BM_CTCRST BIT(1)
+/* Clock Enable */
+#define BM_CLKEN BIT(0)
+
+/* Counter Increment Interrupt Register */
+#define HW_CIIR 0x0C
+#define BM_CIIR_IMYEAR BIT(7)
+#define BM_CIIR_IMMON BIT(6)
+#define BM_CIIR_IMDOY BIT(5)
+#define BM_CIIR_IMDOW BIT(4)
+#define BM_CIIR_IMDOM BIT(3)
+#define BM_CIIR_IMHOUR BIT(2)
+#define BM_CIIR_IMMIN BIT(1)
+#define BM_CIIR_IMSEC BIT(0)
+
+/* Alarm Mask Register */
+#define HW_AMR 0x10
+#define BM_AMR_IMYEAR BIT(7)
+#define BM_AMR_IMMON BIT(6)
+#define BM_AMR_IMDOY BIT(5)
+#define BM_AMR_IMDOW BIT(4)
+#define BM_AMR_IMDOM BIT(3)
+#define BM_AMR_IMHOUR BIT(2)
+#define BM_AMR_IMMIN BIT(1)
+#define BM_AMR_IMSEC BIT(0)
+#define BM_AMR_OFF 0xff
+
+/* Consolidated time registers */
+#define HW_CTIME0 0x14
+#define BM_CTIME0_DOW_S 24
+#define BM_CTIME0_DOW_M 0x7
+#define BM_CTIME0_HOUR_S 16
+#define BM_CTIME0_HOUR_M 0x1f
+#define BM_CTIME0_MIN_S 8
+#define BM_CTIME0_MIN_M 0x3f
+#define BM_CTIME0_SEC_S 0
+#define BM_CTIME0_SEC_M 0x3f
+
+#define HW_CTIME1 0x18
+#define BM_CTIME1_YEAR_S 16
+#define BM_CTIME1_YEAR_M 0xfff
+#define BM_CTIME1_MON_S 8
+#define BM_CTIME1_MON_M 0xf
+#define BM_CTIME1_DOM_S 0
+#define BM_CTIME1_DOM_M 0x1f
+
+#define HW_CTIME2 0x1C
+#define BM_CTIME2_DOY_S 0
+#define BM_CTIME2_DOY_M 0xfff
+
+/* Time counter registers */
+#define HW_SEC 0x20
+#define HW_MIN 0x24
+#define HW_HOUR 0x28
+#define HW_DOM 0x2C
+#define HW_DOW 0x30
+#define HW_DOY 0x34
+#define HW_MONTH 0x38
+#define HW_YEAR 0x3C
+
+#define HW_CALIBRATION 0x40
+#define BM_CALDIR_BACK BIT(17)
+#define BM_CALVAL_M 0x1ffff
+
+/* General purpose registers */
+#define HW_GPREG0 0x44
+#define HW_GPREG1 0x48
+#define HW_GPREG2 0x4C
+#define HW_GPREG3 0x50
+#define HW_GPREG4 0x54
+
+/* Alarm register group */
+#define HW_ALSEC 0x60
+#define HW_ALMIN 0x64
+#define HW_ALHOUR 0x68
+#define HW_ALDOM 0x6C
+#define HW_ALDOW 0x70
+#define HW_ALDOY 0x74
+#define HW_ALMON 0x78
+#define HW_ALYEAR 0x7C
+
+struct asm9260_rtc_priv {
+ struct device *dev;
+ void __iomem *iobase;
+ struct rtc_device *rtc;
+ struct clk *clk;
+ /* io lock */
+ spinlock_t lock;
+};
+
+static irqreturn_t asm9260_rtc_irq(int irq, void *dev_id)
+{
+ struct asm9260_rtc_priv *priv = dev_id;
+ u32 isr;
+ unsigned long events = 0;
+
+ isr = ioread32(priv->iobase + HW_CIIR);
+ if (!isr)
+ return IRQ_NONE;
+
+ iowrite32(0, priv->iobase + HW_CIIR);
+
+ events |= RTC_AF | RTC_IRQF;
+
+ rtc_update_irq(priv->rtc, 1, events);
+
+ return IRQ_HANDLED;
+}
+
+static int asm9260_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+ u32 ctime0, ctime1, ctime2;
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&priv->lock, irq_flags);
+ ctime0 = ioread32(priv->iobase + HW_CTIME0);
+ ctime1 = ioread32(priv->iobase + HW_CTIME1);
+ ctime2 = ioread32(priv->iobase + HW_CTIME2);
+
+ if (ctime1 != ioread32(priv->iobase + HW_CTIME1)) {
+ /*
+ * woops, counter flipped right now. Now we are safe
+ * to reread.
+ */
+ ctime0 = ioread32(priv->iobase + HW_CTIME0);
+ ctime1 = ioread32(priv->iobase + HW_CTIME1);
+ ctime2 = ioread32(priv->iobase + HW_CTIME2);
+ }
+ spin_unlock_irqrestore(&priv->lock, irq_flags);
+
+ tm->tm_sec = (ctime0 >> BM_CTIME0_SEC_S) & BM_CTIME0_SEC_M;
+ tm->tm_min = (ctime0 >> BM_CTIME0_MIN_S) & BM_CTIME0_MIN_M;
+ tm->tm_hour = (ctime0 >> BM_CTIME0_HOUR_S) & BM_CTIME0_HOUR_M;
+ tm->tm_wday = (ctime0 >> BM_CTIME0_DOW_S) & BM_CTIME0_DOW_M;
+
+ tm->tm_mday = (ctime1 >> BM_CTIME1_DOM_S) & BM_CTIME1_DOM_M;
+ tm->tm_mon = (ctime1 >> BM_CTIME1_MON_S) & BM_CTIME1_MON_M;
+ tm->tm_year = (ctime1 >> BM_CTIME1_YEAR_S) & BM_CTIME1_YEAR_M;
+
+ tm->tm_yday = (ctime2 >> BM_CTIME2_DOY_S) & BM_CTIME2_DOY_M;
+
+ return 0;
+}
+
+static int asm9260_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&priv->lock, irq_flags);
+ /*
+ * make sure SEC counter will not flip other counter on write time,
+ * real value will be written at the enf of sequence.
+ */
+ iowrite32(0, priv->iobase + HW_SEC);
+
+ iowrite32(tm->tm_year, priv->iobase + HW_YEAR);
+ iowrite32(tm->tm_mon, priv->iobase + HW_MONTH);
+ iowrite32(tm->tm_mday, priv->iobase + HW_DOM);
+ iowrite32(tm->tm_wday, priv->iobase + HW_DOW);
+ iowrite32(tm->tm_yday, priv->iobase + HW_DOY);
+ iowrite32(tm->tm_hour, priv->iobase + HW_HOUR);
+ iowrite32(tm->tm_min, priv->iobase + HW_MIN);
+ iowrite32(tm->tm_sec, priv->iobase + HW_SEC);
+ spin_unlock_irqrestore(&priv->lock, irq_flags);
+
+ return 0;
+}
+
+static int asm9260_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&priv->lock, irq_flags);
+ alrm->time.tm_year = ioread32(priv->iobase + HW_ALYEAR);
+ alrm->time.tm_mon = ioread32(priv->iobase + HW_ALMON);
+ alrm->time.tm_mday = ioread32(priv->iobase + HW_ALDOM);
+ alrm->time.tm_wday = ioread32(priv->iobase + HW_ALDOW);
+ alrm->time.tm_yday = ioread32(priv->iobase + HW_ALDOY);
+ alrm->time.tm_hour = ioread32(priv->iobase + HW_ALHOUR);
+ alrm->time.tm_min = ioread32(priv->iobase + HW_ALMIN);
+ alrm->time.tm_sec = ioread32(priv->iobase + HW_ALSEC);
+
+ alrm->enabled = ioread32(priv->iobase + HW_AMR) ? 1 : 0;
+ alrm->pending = ioread32(priv->iobase + HW_CIIR) ? 1 : 0;
+ spin_unlock_irqrestore(&priv->lock, irq_flags);
+
+ return rtc_valid_tm(&alrm->time);
+}
+
+static int asm9260_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&priv->lock, irq_flags);
+ iowrite32(alrm->time.tm_year, priv->iobase + HW_ALYEAR);
+ iowrite32(alrm->time.tm_mon, priv->iobase + HW_ALMON);
+ iowrite32(alrm->time.tm_mday, priv->iobase + HW_ALDOM);
+ iowrite32(alrm->time.tm_wday, priv->iobase + HW_ALDOW);
+ iowrite32(alrm->time.tm_yday, priv->iobase + HW_ALDOY);
+ iowrite32(alrm->time.tm_hour, priv->iobase + HW_ALHOUR);
+ iowrite32(alrm->time.tm_min, priv->iobase + HW_ALMIN);
+ iowrite32(alrm->time.tm_sec, priv->iobase + HW_ALSEC);
+
+ iowrite32(alrm->enabled ? 0 : BM_AMR_OFF, priv->iobase + HW_AMR);
+ spin_unlock_irqrestore(&priv->lock, irq_flags);
+
+ return 0;
+}
+
+static int asm9260_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
+
+ iowrite32(enabled ? 0 : BM_AMR_OFF, priv->iobase + HW_AMR);
+ return 0;
+}
+
+static const struct rtc_class_ops asm9260_rtc_ops = {
+ .read_time = asm9260_rtc_read_time,
+ .set_time = asm9260_rtc_set_time,
+ .read_alarm = asm9260_rtc_read_alarm,
+ .set_alarm = asm9260_rtc_set_alarm,
+ .alarm_irq_enable = asm9260_alarm_irq_enable,
+};
+
+static int asm9260_rtc_probe(struct platform_device *pdev)
+{
+ struct asm9260_rtc_priv *priv;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int irq_alarm, ret;
+ u32 ccr;
+
+ priv = devm_kzalloc(dev, sizeof(struct asm9260_rtc_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+ platform_set_drvdata(pdev, priv);
+
+ irq_alarm = platform_get_irq(pdev, 0);
+ if (irq_alarm < 0) {
+ dev_err(dev, "No alarm IRQ resource defined\n");
+ return irq_alarm;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->iobase = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->iobase))
+ return PTR_ERR(priv->iobase);
+
+ priv->clk = devm_clk_get(dev, "ahb");
+ ret = clk_prepare_enable(priv->clk);
+ if (ret) {
+ dev_err(dev, "Failed to enable clk!\n");
+ return ret;
+ }
+
+ ccr = ioread32(priv->iobase + HW_CCR);
+ /* if dev is not enabled, reset it */
+ if ((ccr & (BM_CLKEN | BM_CTCRST)) != BM_CLKEN) {
+ iowrite32(BM_CTCRST, priv->iobase + HW_CCR);
+ ccr = 0;
+ }
+
+ iowrite32(BM_CLKEN | ccr, priv->iobase + HW_CCR);
+ iowrite32(0, priv->iobase + HW_CIIR);
+ iowrite32(BM_AMR_OFF, priv->iobase + HW_AMR);
+
+ priv->rtc = devm_rtc_device_register(dev, dev_name(dev),
+ &asm9260_rtc_ops, THIS_MODULE);
+ if (IS_ERR(priv->rtc)) {
+ ret = PTR_ERR(priv->rtc);
+ dev_err(dev, "Failed to register RTC device: %d\n", ret);
+ goto err_return;
+ }
+
+ ret = devm_request_threaded_irq(dev, irq_alarm, NULL,
+ asm9260_rtc_irq, IRQF_ONESHOT,
+ dev_name(dev), priv);
+ if (ret < 0) {
+ dev_err(dev, "can't get irq %i, err %d\n",
+ irq_alarm, ret);
+ goto err_return;
+ }
+
+ return 0;
+
+err_return:
+ clk_disable_unprepare(priv->clk);
+ return ret;
+}
+
+static int asm9260_rtc_remove(struct platform_device *pdev)
+{
+ struct asm9260_rtc_priv *priv = platform_get_drvdata(pdev);
+
+ /* Disable alarm matching */
+ iowrite32(BM_AMR_OFF, priv->iobase + HW_AMR);
+ clk_disable_unprepare(priv->clk);
+ return 0;
+}
+
+static const struct of_device_id asm9260_dt_ids[] = {
+ { .compatible = "alphascale,asm9260-rtc", },
+ {}
+};
+
+static struct platform_driver asm9260_rtc_driver = {
+ .probe = asm9260_rtc_probe,
+ .remove = asm9260_rtc_remove,
+ .driver = {
+ .name = "asm9260-rtc",
+ .owner = THIS_MODULE,
+ .of_match_table = asm9260_dt_ids,
+ },
+};
+
+module_platform_driver(asm9260_rtc_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>");
+MODULE_DESCRIPTION("Alphascale asm9260 SoC Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
index f39691eea..8e41c4613 100644
--- a/drivers/rtc/rtc-ds1305.c
+++ b/drivers/rtc/rtc-ds1305.c
@@ -532,7 +532,7 @@ ds1305_nvram_read(struct file *filp, struct kobject *kobj,
struct spi_transfer x[2];
int status;
- spi = container_of(kobj, struct spi_device, dev.kobj);
+ spi = to_spi_device(kobj_to_dev(kobj));
addr = DS1305_NVRAM + off;
msg_init(&m, x, &addr, count, NULL, buf);
@@ -554,7 +554,7 @@ ds1305_nvram_write(struct file *filp, struct kobject *kobj,
struct spi_transfer x[2];
int status;
- spi = container_of(kobj, struct spi_device, dev.kobj);
+ spi = to_spi_device(kobj_to_dev(kobj));
addr = (DS1305_WRITE | DS1305_NVRAM) + off;
msg_init(&m, x, &addr, count, buf, NULL);
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index cf685f67b..ecb7dbae9 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -19,6 +19,9 @@
#include <linux/rtc.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/clk-provider.h>
/*
* We can't determine type by probing, but if we expect pre-Linux code
@@ -89,6 +92,7 @@ enum ds_type {
# define DS1340_BIT_OSF 0x80
#define DS1337_REG_STATUS 0x0f
# define DS1337_BIT_OSF 0x80
+# define DS3231_BIT_EN32KHZ 0x08
# define DS1337_BIT_A2I 0x02
# define DS1337_BIT_A1I 0x01
#define DS1339_REG_ALARM1_SECS 0x07
@@ -118,6 +122,9 @@ struct ds1307 {
u8 length, u8 *values);
s32 (*write_block_data)(const struct i2c_client *client, u8 command,
u8 length, const u8 *values);
+#ifdef CONFIG_COMMON_CLK
+ struct clk_hw clks[2];
+#endif
};
struct chip_desc {
@@ -842,6 +849,378 @@ out:
return;
}
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_RTC_DRV_DS1307_HWMON
+
+/*
+ * Temperature sensor support for ds3231 devices.
+ */
+
+#define DS3231_REG_TEMPERATURE 0x11
+
+/*
+ * A user-initiated temperature conversion is not started by this function,
+ * so the temperature is updated once every 64 seconds.
+ */
+static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC)
+{
+ struct ds1307 *ds1307 = dev_get_drvdata(dev);
+ u8 temp_buf[2];
+ s16 temp;
+ int ret;
+
+ ret = ds1307->read_block_data(ds1307->client, DS3231_REG_TEMPERATURE,
+ sizeof(temp_buf), temp_buf);
+ if (ret < 0)
+ return ret;
+ if (ret != sizeof(temp_buf))
+ return -EIO;
+
+ /*
+ * Temperature is represented as a 10-bit code with a resolution of
+ * 0.25 degree celsius and encoded in two's complement format.
+ */
+ temp = (temp_buf[0] << 8) | temp_buf[1];
+ temp >>= 6;
+ *mC = temp * 250;
+
+ return 0;
+}
+
+static ssize_t ds3231_hwmon_show_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ s32 temp;
+
+ ret = ds3231_hwmon_read_temp(dev, &temp);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%d\n", temp);
+}
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ds3231_hwmon_show_temp,
+ NULL, 0);
+
+static struct attribute *ds3231_hwmon_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(ds3231_hwmon);
+
+static void ds1307_hwmon_register(struct ds1307 *ds1307)
+{
+ struct device *dev;
+
+ if (ds1307->type != ds_3231)
+ return;
+
+ dev = devm_hwmon_device_register_with_groups(&ds1307->client->dev,
+ ds1307->client->name,
+ ds1307, ds3231_hwmon_groups);
+ if (IS_ERR(dev)) {
+ dev_warn(&ds1307->client->dev,
+ "unable to register hwmon device %ld\n", PTR_ERR(dev));
+ }
+}
+
+#else
+
+static void ds1307_hwmon_register(struct ds1307 *ds1307)
+{
+}
+
+#endif /* CONFIG_RTC_DRV_DS1307_HWMON */
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Square-wave output support for DS3231
+ * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3231.pdf
+ */
+#ifdef CONFIG_COMMON_CLK
+
+enum {
+ DS3231_CLK_SQW = 0,
+ DS3231_CLK_32KHZ,
+};
+
+#define clk_sqw_to_ds1307(clk) \
+ container_of(clk, struct ds1307, clks[DS3231_CLK_SQW])
+#define clk_32khz_to_ds1307(clk) \
+ container_of(clk, struct ds1307, clks[DS3231_CLK_32KHZ])
+
+static int ds3231_clk_sqw_rates[] = {
+ 1,
+ 1024,
+ 4096,
+ 8192,
+};
+
+static int ds1337_write_control(struct ds1307 *ds1307, u8 mask, u8 value)
+{
+ struct i2c_client *client = ds1307->client;
+ struct mutex *lock = &ds1307->rtc->ops_lock;
+ int control;
+ int ret;
+
+ mutex_lock(lock);
+
+ control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
+ if (control < 0) {
+ ret = control;
+ goto out;
+ }
+
+ control &= ~mask;
+ control |= value;
+
+ ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
+out:
+ mutex_unlock(lock);
+
+ return ret;
+}
+
+static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
+ int control;
+ int rate_sel = 0;
+
+ control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
+ if (control < 0)
+ return control;
+ if (control & DS1337_BIT_RS1)
+ rate_sel += 1;
+ if (control & DS1337_BIT_RS2)
+ rate_sel += 2;
+
+ return ds3231_clk_sqw_rates[rate_sel];
+}
+
+static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ int i;
+
+ for (i = ARRAY_SIZE(ds3231_clk_sqw_rates) - 1; i >= 0; i--) {
+ if (ds3231_clk_sqw_rates[i] <= rate)
+ return ds3231_clk_sqw_rates[i];
+ }
+
+ return 0;
+}
+
+static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
+ int control = 0;
+ int rate_sel;
+
+ for (rate_sel = 0; rate_sel < ARRAY_SIZE(ds3231_clk_sqw_rates);
+ rate_sel++) {
+ if (ds3231_clk_sqw_rates[rate_sel] == rate)
+ break;
+ }
+
+ if (rate_sel == ARRAY_SIZE(ds3231_clk_sqw_rates))
+ return -EINVAL;
+
+ if (rate_sel & 1)
+ control |= DS1337_BIT_RS1;
+ if (rate_sel & 2)
+ control |= DS1337_BIT_RS2;
+
+ return ds1337_write_control(ds1307, DS1337_BIT_RS1 | DS1337_BIT_RS2,
+ control);
+}
+
+static int ds3231_clk_sqw_prepare(struct clk_hw *hw)
+{
+ struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
+
+ return ds1337_write_control(ds1307, DS1337_BIT_INTCN, 0);
+}
+
+static void ds3231_clk_sqw_unprepare(struct clk_hw *hw)
+{
+ struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
+
+ ds1337_write_control(ds1307, DS1337_BIT_INTCN, DS1337_BIT_INTCN);
+}
+
+static int ds3231_clk_sqw_is_prepared(struct clk_hw *hw)
+{
+ struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
+ int control;
+
+ control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
+ if (control < 0)
+ return control;
+
+ return !(control & DS1337_BIT_INTCN);
+}
+
+static const struct clk_ops ds3231_clk_sqw_ops = {
+ .prepare = ds3231_clk_sqw_prepare,
+ .unprepare = ds3231_clk_sqw_unprepare,
+ .is_prepared = ds3231_clk_sqw_is_prepared,
+ .recalc_rate = ds3231_clk_sqw_recalc_rate,
+ .round_rate = ds3231_clk_sqw_round_rate,
+ .set_rate = ds3231_clk_sqw_set_rate,
+};
+
+static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return 32768;
+}
+
+static int ds3231_clk_32khz_control(struct ds1307 *ds1307, bool enable)
+{
+ struct i2c_client *client = ds1307->client;
+ struct mutex *lock = &ds1307->rtc->ops_lock;
+ int status;
+ int ret;
+
+ mutex_lock(lock);
+
+ status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
+ if (status < 0) {
+ ret = status;
+ goto out;
+ }
+
+ if (enable)
+ status |= DS3231_BIT_EN32KHZ;
+ else
+ status &= ~DS3231_BIT_EN32KHZ;
+
+ ret = i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, status);
+out:
+ mutex_unlock(lock);
+
+ return ret;
+}
+
+static int ds3231_clk_32khz_prepare(struct clk_hw *hw)
+{
+ struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
+
+ return ds3231_clk_32khz_control(ds1307, true);
+}
+
+static void ds3231_clk_32khz_unprepare(struct clk_hw *hw)
+{
+ struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
+
+ ds3231_clk_32khz_control(ds1307, false);
+}
+
+static int ds3231_clk_32khz_is_prepared(struct clk_hw *hw)
+{
+ struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
+ int status;
+
+ status = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_STATUS);
+ if (status < 0)
+ return status;
+
+ return !!(status & DS3231_BIT_EN32KHZ);
+}
+
+static const struct clk_ops ds3231_clk_32khz_ops = {
+ .prepare = ds3231_clk_32khz_prepare,
+ .unprepare = ds3231_clk_32khz_unprepare,
+ .is_prepared = ds3231_clk_32khz_is_prepared,
+ .recalc_rate = ds3231_clk_32khz_recalc_rate,
+};
+
+static struct clk_init_data ds3231_clks_init[] = {
+ [DS3231_CLK_SQW] = {
+ .name = "ds3231_clk_sqw",
+ .ops = &ds3231_clk_sqw_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [DS3231_CLK_32KHZ] = {
+ .name = "ds3231_clk_32khz",
+ .ops = &ds3231_clk_32khz_ops,
+ .flags = CLK_IS_ROOT,
+ },
+};
+
+static int ds3231_clks_register(struct ds1307 *ds1307)
+{
+ struct i2c_client *client = ds1307->client;
+ struct device_node *node = client->dev.of_node;
+ struct clk_onecell_data *onecell;
+ int i;
+
+ onecell = devm_kzalloc(&client->dev, sizeof(*onecell), GFP_KERNEL);
+ if (!onecell)
+ return -ENOMEM;
+
+ onecell->clk_num = ARRAY_SIZE(ds3231_clks_init);
+ onecell->clks = devm_kcalloc(&client->dev, onecell->clk_num,
+ sizeof(onecell->clks[0]), GFP_KERNEL);
+ if (!onecell->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) {
+ struct clk_init_data init = ds3231_clks_init[i];
+
+ /*
+ * Interrupt signal due to alarm conditions and square-wave
+ * output share same pin, so don't initialize both.
+ */
+ if (i == DS3231_CLK_SQW && test_bit(HAS_ALARM, &ds1307->flags))
+ continue;
+
+ /* optional override of the clockname */
+ of_property_read_string_index(node, "clock-output-names", i,
+ &init.name);
+ ds1307->clks[i].init = &init;
+
+ onecell->clks[i] = devm_clk_register(&client->dev,
+ &ds1307->clks[i]);
+ if (IS_ERR(onecell->clks[i]))
+ return PTR_ERR(onecell->clks[i]);
+ }
+
+ if (!node)
+ return 0;
+
+ of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
+
+ return 0;
+}
+
+static void ds1307_clks_register(struct ds1307 *ds1307)
+{
+ int ret;
+
+ if (ds1307->type != ds_3231)
+ return;
+
+ ret = ds3231_clks_register(ds1307);
+ if (ret) {
+ dev_warn(&ds1307->client->dev,
+ "unable to register clock device %d\n", ret);
+ }
+}
+
+#else
+
+static void ds1307_clks_register(struct ds1307 *ds1307)
+{
+}
+
+#endif /* CONFIG_COMMON_CLK */
+
static int ds1307_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -851,6 +1230,7 @@ static int ds1307_probe(struct i2c_client *client,
struct chip_desc *chip = &chips[id->driver_data];
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
bool want_irq = false;
+ bool ds1307_can_wakeup_device = false;
unsigned char *buf;
struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
irq_handler_t irq_handler = ds1307_irq;
@@ -898,6 +1278,20 @@ static int ds1307_probe(struct i2c_client *client,
ds1307->write_block_data = ds1307_write_block_data;
}
+#ifdef CONFIG_OF
+/*
+ * For devices with no IRQ directly connected to the SoC, the RTC chip
+ * can be forced as a wakeup source by stating that explicitly in
+ * the device's .dts file using the "wakeup-source" boolean property.
+ * If the "wakeup-source" property is set, don't request an IRQ.
+ * This will guarantee the 'wakealarm' sysfs entry is available on the device,
+ * if supported by the RTC.
+ */
+ if (of_property_read_bool(client->dev.of_node, "wakeup-source")) {
+ ds1307_can_wakeup_device = true;
+ }
+#endif
+
switch (ds1307->type) {
case ds_1337:
case ds_1339:
@@ -916,11 +1310,13 @@ static int ds1307_probe(struct i2c_client *client,
ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
/*
- * Using IRQ? Disable the square wave and both alarms.
+ * Using IRQ or defined as wakeup-source?
+ * Disable the square wave and both alarms.
* For some variants, be sure alarms can trigger when we're
* running on Vbackup (BBSQI/BBSQW)
*/
- if (ds1307->client->irq > 0 && chip->alarm) {
+ if (chip->alarm && (ds1307->client->irq > 0 ||
+ ds1307_can_wakeup_device)) {
ds1307->regs[0] |= DS1337_BIT_INTCN
| bbsqi_bitpos[ds1307->type];
ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
@@ -1135,6 +1531,14 @@ read_rtc:
return PTR_ERR(ds1307->rtc);
}
+ if (ds1307_can_wakeup_device && ds1307->client->irq <= 0) {
+ /* Disable request for an IRQ */
+ want_irq = false;
+ dev_info(&client->dev, "'wakeup-source' is set, request for an IRQ is disabled!\n");
+ /* We cannot support UIE mode if we do not have an IRQ line */
+ ds1307->rtc->uie_unsupported = 1;
+ }
+
if (want_irq) {
err = devm_request_threaded_irq(&client->dev,
client->irq, NULL, irq_handler,
@@ -1182,6 +1586,9 @@ read_rtc:
}
}
+ ds1307_hwmon_register(ds1307);
+ ds1307_clks_register(ds1307);
+
return 0;
exit:
diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
index 08e0ff8c7..1e6cfc84b 100644
--- a/drivers/rtc/rtc-ds1685.c
+++ b/drivers/rtc/rtc-ds1685.c
@@ -2161,6 +2161,7 @@ ds1685_rtc_poweroff(struct platform_device *pdev)
/* Check for valid RTC data, else, spin forever. */
if (unlikely(!pdev)) {
pr_emerg("platform device data not available, spinning forever ...\n");
+ while(1);
unreachable();
} else {
/* Get the rtc data. */
diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c
index 4e99ace66..7edc88972 100644
--- a/drivers/rtc/rtc-ds3232.c
+++ b/drivers/rtc/rtc-ds3232.c
@@ -1,19 +1,15 @@
/*
- * RTC client/driver for the Maxim/Dallas DS3232 Real-Time Clock over I2C
+ * RTC client/driver for the Maxim/Dallas DS3232/DS3234 Real-Time Clock
*
* Copyright (C) 2009-2011 Freescale Semiconductor.
* Author: Jack Lan <jack.lan@freescale.com>
+ * Copyright (C) 2008 MIMOMax Wireless Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
-/*
- * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
- * recommened in .../Documentation/i2c/writing-clients section
- * "Sending and receiving", using SMBus level communication is preferred.
- */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -21,10 +17,11 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
+#include <linux/spi/spi.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
-#include <linux/workqueue.h>
#include <linux/slab.h>
+#include <linux/regmap.h>
#define DS3232_REG_SECONDS 0x00
#define DS3232_REG_MINUTES 0x01
@@ -50,39 +47,33 @@
# define DS3232_REG_SR_A1F 0x01
struct ds3232 {
- struct i2c_client *client;
+ struct device *dev;
+ struct regmap *regmap;
+ int irq;
struct rtc_device *rtc;
- struct work_struct work;
- /* The mutex protects alarm operations, and prevents a race
- * between the enable_irq() in the workqueue and the free_irq()
- * in the remove function.
- */
- struct mutex mutex;
bool suspended;
- int exiting;
};
-static struct i2c_driver ds3232_driver;
-
-static int ds3232_check_rtc_status(struct i2c_client *client)
+static int ds3232_check_rtc_status(struct device *dev)
{
+ struct ds3232 *ds3232 = dev_get_drvdata(dev);
int ret = 0;
int control, stat;
- stat = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
- if (stat < 0)
- return stat;
+ ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+ if (ret)
+ return ret;
if (stat & DS3232_REG_SR_OSF)
- dev_warn(&client->dev,
+ dev_warn(dev,
"oscillator discontinuity flagged, "
"time unreliable\n");
stat &= ~(DS3232_REG_SR_OSF | DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
- ret = i2c_smbus_write_byte_data(client, DS3232_REG_SR, stat);
- if (ret < 0)
+ ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+ if (ret)
return ret;
/* If the alarm is pending, clear it before requesting
@@ -90,31 +81,28 @@ static int ds3232_check_rtc_status(struct i2c_client *client)
* before everything is initialized.
*/
- control = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
- if (control < 0)
- return control;
+ ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+ if (ret)
+ return ret;
control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
control |= DS3232_REG_CR_INTCN;
- return i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
+ return regmap_write(ds3232->regmap, DS3232_REG_CR, control);
}
static int ds3232_read_time(struct device *dev, struct rtc_time *time)
{
- struct i2c_client *client = to_i2c_client(dev);
+ struct ds3232 *ds3232 = dev_get_drvdata(dev);
int ret;
u8 buf[7];
unsigned int year, month, day, hour, minute, second;
unsigned int week, twelve_hr, am_pm;
unsigned int century, add_century = 0;
- ret = i2c_smbus_read_i2c_block_data(client, DS3232_REG_SECONDS, 7, buf);
-
- if (ret < 0)
+ ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_SECONDS, buf, 7);
+ if (ret)
return ret;
- if (ret < 7)
- return -EIO;
second = buf[0];
minute = buf[1];
@@ -159,7 +147,7 @@ static int ds3232_read_time(struct device *dev, struct rtc_time *time)
static int ds3232_set_time(struct device *dev, struct rtc_time *time)
{
- struct i2c_client *client = to_i2c_client(dev);
+ struct ds3232 *ds3232 = dev_get_drvdata(dev);
u8 buf[7];
/* Extract time from rtc_time and load into ds3232*/
@@ -179,8 +167,7 @@ static int ds3232_set_time(struct device *dev, struct rtc_time *time)
buf[6] = bin2bcd(time->tm_year);
}
- return i2c_smbus_write_i2c_block_data(client,
- DS3232_REG_SECONDS, 7, buf);
+ return regmap_bulk_write(ds3232->regmap, DS3232_REG_SECONDS, buf, 7);
}
/*
@@ -190,24 +177,19 @@ static int ds3232_set_time(struct device *dev, struct rtc_time *time)
*/
static int ds3232_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds3232 *ds3232 = i2c_get_clientdata(client);
+ struct ds3232 *ds3232 = dev_get_drvdata(dev);
int control, stat;
int ret;
u8 buf[4];
- mutex_lock(&ds3232->mutex);
-
- ret = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
- if (ret < 0)
+ ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+ if (ret)
goto out;
- stat = ret;
- ret = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
- if (ret < 0)
+ ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+ if (ret)
goto out;
- control = ret;
- ret = i2c_smbus_read_i2c_block_data(client, DS3232_REG_ALARM1, 4, buf);
- if (ret < 0)
+ ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_ALARM1, buf, 4);
+ if (ret)
goto out;
alarm->time.tm_sec = bcd2bin(buf[0] & 0x7F);
@@ -226,7 +208,6 @@ static int ds3232_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
ret = 0;
out:
- mutex_unlock(&ds3232->mutex);
return ret;
}
@@ -236,166 +217,129 @@ out:
*/
static int ds3232_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds3232 *ds3232 = i2c_get_clientdata(client);
+ struct ds3232 *ds3232 = dev_get_drvdata(dev);
int control, stat;
int ret;
u8 buf[4];
- if (client->irq <= 0)
+ if (ds3232->irq <= 0)
return -EINVAL;
- mutex_lock(&ds3232->mutex);
-
buf[0] = bin2bcd(alarm->time.tm_sec);
buf[1] = bin2bcd(alarm->time.tm_min);
buf[2] = bin2bcd(alarm->time.tm_hour);
buf[3] = bin2bcd(alarm->time.tm_mday);
/* clear alarm interrupt enable bit */
- ret = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
- if (ret < 0)
+ ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+ if (ret)
goto out;
- control = ret;
control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
- ret = i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
- if (ret < 0)
+ ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
+ if (ret)
goto out;
/* clear any pending alarm flag */
- ret = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
- if (ret < 0)
+ ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+ if (ret)
goto out;
- stat = ret;
stat &= ~(DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
- ret = i2c_smbus_write_byte_data(client, DS3232_REG_SR, stat);
- if (ret < 0)
+ ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+ if (ret)
goto out;
- ret = i2c_smbus_write_i2c_block_data(client, DS3232_REG_ALARM1, 4, buf);
+ ret = regmap_bulk_write(ds3232->regmap, DS3232_REG_ALARM1, buf, 4);
+ if (ret)
+ goto out;
if (alarm->enabled) {
control |= DS3232_REG_CR_A1IE;
- ret = i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
+ ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
}
out:
- mutex_unlock(&ds3232->mutex);
return ret;
}
-static void ds3232_update_alarm(struct i2c_client *client)
+static int ds3232_update_alarm(struct device *dev, unsigned int enabled)
{
- struct ds3232 *ds3232 = i2c_get_clientdata(client);
+ struct ds3232 *ds3232 = dev_get_drvdata(dev);
int control;
int ret;
- u8 buf[4];
-
- mutex_lock(&ds3232->mutex);
-
- ret = i2c_smbus_read_i2c_block_data(client, DS3232_REG_ALARM1, 4, buf);
- if (ret < 0)
- goto unlock;
-
- buf[0] = bcd2bin(buf[0]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ?
- 0x80 : buf[0];
- buf[1] = bcd2bin(buf[1]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ?
- 0x80 : buf[1];
- buf[2] = bcd2bin(buf[2]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ?
- 0x80 : buf[2];
- buf[3] = bcd2bin(buf[3]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ?
- 0x80 : buf[3];
-
- ret = i2c_smbus_write_i2c_block_data(client, DS3232_REG_ALARM1, 4, buf);
- if (ret < 0)
- goto unlock;
- control = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
- if (control < 0)
- goto unlock;
+ ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+ if (ret)
+ return ret;
- if (ds3232->rtc->irq_data & (RTC_AF | RTC_UF))
+ if (enabled)
/* enable alarm1 interrupt */
control |= DS3232_REG_CR_A1IE;
else
/* disable alarm1 interrupt */
control &= ~(DS3232_REG_CR_A1IE);
- i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
+ ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control);
-unlock:
- mutex_unlock(&ds3232->mutex);
+ return ret;
}
static int ds3232_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds3232 *ds3232 = i2c_get_clientdata(client);
+ struct ds3232 *ds3232 = dev_get_drvdata(dev);
- if (client->irq <= 0)
+ if (ds3232->irq <= 0)
return -EINVAL;
- if (enabled)
- ds3232->rtc->irq_data |= RTC_AF;
- else
- ds3232->rtc->irq_data &= ~RTC_AF;
-
- ds3232_update_alarm(client);
- return 0;
+ return ds3232_update_alarm(dev, enabled);
}
static irqreturn_t ds3232_irq(int irq, void *dev_id)
{
- struct i2c_client *client = dev_id;
- struct ds3232 *ds3232 = i2c_get_clientdata(client);
-
- disable_irq_nosync(irq);
-
- /*
- * If rtc as a wakeup source, can't schedule the work
- * at system resume flow, because at this time the i2c bus
- * has not been resumed.
- */
- if (!ds3232->suspended)
- schedule_work(&ds3232->work);
-
- return IRQ_HANDLED;
-}
-
-static void ds3232_work(struct work_struct *work)
-{
- struct ds3232 *ds3232 = container_of(work, struct ds3232, work);
- struct i2c_client *client = ds3232->client;
+ struct device *dev = dev_id;
+ struct ds3232 *ds3232 = dev_get_drvdata(dev);
+ struct mutex *lock = &ds3232->rtc->ops_lock;
+ int ret;
int stat, control;
- mutex_lock(&ds3232->mutex);
+ mutex_lock(lock);
- stat = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
- if (stat < 0)
+ ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat);
+ if (ret)
goto unlock;
if (stat & DS3232_REG_SR_A1F) {
- control = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
- if (control < 0) {
- pr_warn("Read Control Register error - Disable IRQ%d\n",
- client->irq);
+ ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control);
+ if (ret) {
+ dev_warn(ds3232->dev,
+ "Read Control Register error %d\n", ret);
} else {
/* disable alarm1 interrupt */
control &= ~(DS3232_REG_CR_A1IE);
- i2c_smbus_write_byte_data(client, DS3232_REG_CR,
- control);
+ ret = regmap_write(ds3232->regmap, DS3232_REG_CR,
+ control);
+ if (ret) {
+ dev_warn(ds3232->dev,
+ "Write Control Register error %d\n",
+ ret);
+ goto unlock;
+ }
/* clear the alarm pend flag */
stat &= ~DS3232_REG_SR_A1F;
- i2c_smbus_write_byte_data(client, DS3232_REG_SR, stat);
+ ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat);
+ if (ret) {
+ dev_warn(ds3232->dev,
+ "Write Status Register error %d\n",
+ ret);
+ goto unlock;
+ }
rtc_update_irq(ds3232->rtc, 1, RTC_AF | RTC_IRQF);
-
- if (!ds3232->exiting)
- enable_irq(client->irq);
}
}
unlock:
- mutex_unlock(&ds3232->mutex);
+ mutex_unlock(lock);
+
+ return IRQ_HANDLED;
}
static const struct rtc_class_ops ds3232_rtc_ops = {
@@ -406,67 +350,50 @@ static const struct rtc_class_ops ds3232_rtc_ops = {
.alarm_irq_enable = ds3232_alarm_irq_enable,
};
-static int ds3232_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int ds3232_probe(struct device *dev, struct regmap *regmap, int irq,
+ const char *name)
{
struct ds3232 *ds3232;
int ret;
- ds3232 = devm_kzalloc(&client->dev, sizeof(struct ds3232), GFP_KERNEL);
+ ds3232 = devm_kzalloc(dev, sizeof(*ds3232), GFP_KERNEL);
if (!ds3232)
return -ENOMEM;
- ds3232->client = client;
- i2c_set_clientdata(client, ds3232);
-
- INIT_WORK(&ds3232->work, ds3232_work);
- mutex_init(&ds3232->mutex);
+ ds3232->regmap = regmap;
+ ds3232->irq = irq;
+ ds3232->dev = dev;
+ dev_set_drvdata(dev, ds3232);
- ret = ds3232_check_rtc_status(client);
+ ret = ds3232_check_rtc_status(dev);
if (ret)
return ret;
- if (client->irq > 0) {
- ret = devm_request_irq(&client->dev, client->irq, ds3232_irq,
- IRQF_SHARED, "ds3232", client);
+ if (ds3232->irq > 0) {
+ ret = devm_request_threaded_irq(dev, ds3232->irq, NULL,
+ ds3232_irq,
+ IRQF_SHARED | IRQF_ONESHOT,
+ name, dev);
if (ret) {
- dev_err(&client->dev, "unable to request IRQ\n");
- }
- device_init_wakeup(&client->dev, 1);
- }
- ds3232->rtc = devm_rtc_device_register(&client->dev, client->name,
- &ds3232_rtc_ops, THIS_MODULE);
- return PTR_ERR_OR_ZERO(ds3232->rtc);
-}
-
-static int ds3232_remove(struct i2c_client *client)
-{
- struct ds3232 *ds3232 = i2c_get_clientdata(client);
-
- if (client->irq > 0) {
- mutex_lock(&ds3232->mutex);
- ds3232->exiting = 1;
- mutex_unlock(&ds3232->mutex);
-
- devm_free_irq(&client->dev, client->irq, client);
- cancel_work_sync(&ds3232->work);
+ ds3232->irq = 0;
+ dev_err(dev, "unable to request IRQ\n");
+ } else
+ device_init_wakeup(dev, 1);
}
+ ds3232->rtc = devm_rtc_device_register(dev, name, &ds3232_rtc_ops,
+ THIS_MODULE);
- return 0;
+ return PTR_ERR_OR_ZERO(ds3232->rtc);
}
#ifdef CONFIG_PM_SLEEP
static int ds3232_suspend(struct device *dev)
{
struct ds3232 *ds3232 = dev_get_drvdata(dev);
- struct i2c_client *client = to_i2c_client(dev);
- if (device_can_wakeup(dev)) {
- ds3232->suspended = true;
- if (irq_set_irq_wake(client->irq, 1)) {
+ if (device_may_wakeup(dev)) {
+ if (enable_irq_wake(ds3232->irq))
dev_warn_once(dev, "Cannot set wakeup source\n");
- ds3232->suspended = false;
- }
}
return 0;
@@ -475,16 +402,9 @@ static int ds3232_suspend(struct device *dev)
static int ds3232_resume(struct device *dev)
{
struct ds3232 *ds3232 = dev_get_drvdata(dev);
- struct i2c_client *client = to_i2c_client(dev);
- if (ds3232->suspended) {
- ds3232->suspended = false;
-
- /* Clear the hardware alarm pend flag */
- schedule_work(&ds3232->work);
-
- irq_set_irq_wake(client->irq, 0);
- }
+ if (device_may_wakeup(dev))
+ disable_irq_wake(ds3232->irq);
return 0;
}
@@ -494,6 +414,27 @@ static const struct dev_pm_ops ds3232_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(ds3232_suspend, ds3232_resume)
};
+#if IS_ENABLED(CONFIG_I2C)
+
+static int ds3232_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+ static const struct regmap_config config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ };
+
+ regmap = devm_regmap_init_i2c(client, &config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "%s: regmap allocation failed: %ld\n",
+ __func__, PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ return ds3232_probe(&client->dev, regmap, client->irq, client->name);
+}
+
static const struct i2c_device_id ds3232_id[] = {
{ "ds3232", 0 },
{ }
@@ -505,13 +446,162 @@ static struct i2c_driver ds3232_driver = {
.name = "rtc-ds3232",
.pm = &ds3232_pm_ops,
},
- .probe = ds3232_probe,
- .remove = ds3232_remove,
+ .probe = ds3232_i2c_probe,
.id_table = ds3232_id,
};
-module_i2c_driver(ds3232_driver);
+static int ds3232_register_driver(void)
+{
+ return i2c_add_driver(&ds3232_driver);
+}
+
+static void ds3232_unregister_driver(void)
+{
+ i2c_del_driver(&ds3232_driver);
+}
+
+#else
+
+static int ds3232_register_driver(void)
+{
+ return 0;
+}
+
+static void ds3232_unregister_driver(void)
+{
+}
+
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static int ds3234_probe(struct spi_device *spi)
+{
+ int res;
+ unsigned int tmp;
+ static const struct regmap_config config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .write_flag_mask = 0x80,
+ };
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_spi(spi, &config);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
+ __func__, PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ spi->mode = SPI_MODE_3;
+ spi->bits_per_word = 8;
+ spi_setup(spi);
+
+ res = regmap_read(regmap, DS3232_REG_SECONDS, &tmp);
+ if (res)
+ return res;
+
+ /* Control settings
+ *
+ * CONTROL_REG
+ * BIT 7 6 5 4 3 2 1 0
+ * EOSC BBSQW CONV RS2 RS1 INTCN A2IE A1IE
+ *
+ * 0 0 0 1 1 1 0 0
+ *
+ * CONTROL_STAT_REG
+ * BIT 7 6 5 4 3 2 1 0
+ * OSF BB32kHz CRATE1 CRATE0 EN32kHz BSY A2F A1F
+ *
+ * 1 0 0 0 1 0 0 0
+ */
+ res = regmap_read(regmap, DS3232_REG_CR, &tmp);
+ if (res)
+ return res;
+ res = regmap_write(regmap, DS3232_REG_CR, tmp & 0x1c);
+ if (res)
+ return res;
+
+ res = regmap_read(regmap, DS3232_REG_SR, &tmp);
+ if (res)
+ return res;
+ res = regmap_write(regmap, DS3232_REG_SR, tmp & 0x88);
+ if (res)
+ return res;
+
+ /* Print our settings */
+ res = regmap_read(regmap, DS3232_REG_CR, &tmp);
+ if (res)
+ return res;
+ dev_info(&spi->dev, "Control Reg: 0x%02x\n", tmp);
+
+ res = regmap_read(regmap, DS3232_REG_SR, &tmp);
+ if (res)
+ return res;
+ dev_info(&spi->dev, "Ctrl/Stat Reg: 0x%02x\n", tmp);
+
+ return ds3232_probe(&spi->dev, regmap, spi->irq, "ds3234");
+}
+
+static struct spi_driver ds3234_driver = {
+ .driver = {
+ .name = "ds3234",
+ },
+ .probe = ds3234_probe,
+};
+
+static int ds3234_register_driver(void)
+{
+ return spi_register_driver(&ds3234_driver);
+}
+
+static void ds3234_unregister_driver(void)
+{
+ spi_unregister_driver(&ds3234_driver);
+}
+
+#else
+
+static int ds3234_register_driver(void)
+{
+ return 0;
+}
+
+static void ds3234_unregister_driver(void)
+{
+}
+
+#endif
+
+static int __init ds323x_init(void)
+{
+ int ret;
+
+ ret = ds3232_register_driver();
+ if (ret) {
+ pr_err("Failed to register ds3232 driver: %d\n", ret);
+ return ret;
+ }
+
+ ret = ds3234_register_driver();
+ if (ret) {
+ pr_err("Failed to register ds3234 driver: %d\n", ret);
+ ds3232_unregister_driver();
+ }
+
+ return ret;
+}
+module_init(ds323x_init)
+
+static void __exit ds323x_exit(void)
+{
+ ds3234_unregister_driver();
+ ds3232_unregister_driver();
+}
+module_exit(ds323x_exit)
MODULE_AUTHOR("Srikanth Srinivasan <srikanth.srinivasan@freescale.com>");
-MODULE_DESCRIPTION("Maxim/Dallas DS3232 RTC Driver");
+MODULE_AUTHOR("Dennis Aberilla <denzzzhome@yahoo.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS3232/DS3234 RTC Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ds3234");
diff --git a/drivers/rtc/rtc-ds3234.c b/drivers/rtc/rtc-ds3234.c
deleted file mode 100644
index 570ab28fc..000000000
--- a/drivers/rtc/rtc-ds3234.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/* rtc-ds3234.c
- *
- * Driver for Dallas Semiconductor (DS3234) SPI RTC with Integrated Crystal
- * and SRAM.
- *
- * Copyright (C) 2008 MIMOMax Wireless Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/rtc.h>
-#include <linux/spi/spi.h>
-#include <linux/bcd.h>
-
-#define DS3234_REG_SECONDS 0x00
-#define DS3234_REG_MINUTES 0x01
-#define DS3234_REG_HOURS 0x02
-#define DS3234_REG_DAY 0x03
-#define DS3234_REG_DATE 0x04
-#define DS3234_REG_MONTH 0x05
-#define DS3234_REG_YEAR 0x06
-#define DS3234_REG_CENTURY (1 << 7) /* Bit 7 of the Month register */
-
-#define DS3234_REG_CONTROL 0x0E
-#define DS3234_REG_CONT_STAT 0x0F
-
-static int ds3234_set_reg(struct device *dev, unsigned char address,
- unsigned char data)
-{
- struct spi_device *spi = to_spi_device(dev);
- unsigned char buf[2];
-
- /* MSB must be '1' to indicate write */
- buf[0] = address | 0x80;
- buf[1] = data;
-
- return spi_write_then_read(spi, buf, 2, NULL, 0);
-}
-
-static int ds3234_get_reg(struct device *dev, unsigned char address,
- unsigned char *data)
-{
- struct spi_device *spi = to_spi_device(dev);
-
- *data = address & 0x7f;
-
- return spi_write_then_read(spi, data, 1, data, 1);
-}
-
-static int ds3234_read_time(struct device *dev, struct rtc_time *dt)
-{
- int err;
- unsigned char buf[8];
- struct spi_device *spi = to_spi_device(dev);
-
- buf[0] = 0x00; /* Start address */
-
- err = spi_write_then_read(spi, buf, 1, buf, 8);
- if (err != 0)
- return err;
-
- /* Seconds, Minutes, Hours, Day, Date, Month, Year */
- dt->tm_sec = bcd2bin(buf[0]);
- dt->tm_min = bcd2bin(buf[1]);
- dt->tm_hour = bcd2bin(buf[2] & 0x3f);
- dt->tm_wday = bcd2bin(buf[3]) - 1; /* 0 = Sun */
- dt->tm_mday = bcd2bin(buf[4]);
- dt->tm_mon = bcd2bin(buf[5] & 0x1f) - 1; /* 0 = Jan */
- dt->tm_year = bcd2bin(buf[6] & 0xff) + 100; /* Assume 20YY */
-
- return rtc_valid_tm(dt);
-}
-
-static int ds3234_set_time(struct device *dev, struct rtc_time *dt)
-{
- ds3234_set_reg(dev, DS3234_REG_SECONDS, bin2bcd(dt->tm_sec));
- ds3234_set_reg(dev, DS3234_REG_MINUTES, bin2bcd(dt->tm_min));
- ds3234_set_reg(dev, DS3234_REG_HOURS, bin2bcd(dt->tm_hour) & 0x3f);
-
- /* 0 = Sun */
- ds3234_set_reg(dev, DS3234_REG_DAY, bin2bcd(dt->tm_wday + 1));
- ds3234_set_reg(dev, DS3234_REG_DATE, bin2bcd(dt->tm_mday));
-
- /* 0 = Jan */
- ds3234_set_reg(dev, DS3234_REG_MONTH, bin2bcd(dt->tm_mon + 1));
-
- /* Assume 20YY although we just want to make sure not to go negative. */
- if (dt->tm_year > 100)
- dt->tm_year -= 100;
-
- ds3234_set_reg(dev, DS3234_REG_YEAR, bin2bcd(dt->tm_year));
-
- return 0;
-}
-
-static const struct rtc_class_ops ds3234_rtc_ops = {
- .read_time = ds3234_read_time,
- .set_time = ds3234_set_time,
-};
-
-static int ds3234_probe(struct spi_device *spi)
-{
- struct rtc_device *rtc;
- unsigned char tmp;
- int res;
-
- spi->mode = SPI_MODE_3;
- spi->bits_per_word = 8;
- spi_setup(spi);
-
- res = ds3234_get_reg(&spi->dev, DS3234_REG_SECONDS, &tmp);
- if (res != 0)
- return res;
-
- /* Control settings
- *
- * CONTROL_REG
- * BIT 7 6 5 4 3 2 1 0
- * EOSC BBSQW CONV RS2 RS1 INTCN A2IE A1IE
- *
- * 0 0 0 1 1 1 0 0
- *
- * CONTROL_STAT_REG
- * BIT 7 6 5 4 3 2 1 0
- * OSF BB32kHz CRATE1 CRATE0 EN32kHz BSY A2F A1F
- *
- * 1 0 0 0 1 0 0 0
- */
- ds3234_get_reg(&spi->dev, DS3234_REG_CONTROL, &tmp);
- ds3234_set_reg(&spi->dev, DS3234_REG_CONTROL, tmp & 0x1c);
-
- ds3234_get_reg(&spi->dev, DS3234_REG_CONT_STAT, &tmp);
- ds3234_set_reg(&spi->dev, DS3234_REG_CONT_STAT, tmp & 0x88);
-
- /* Print our settings */
- ds3234_get_reg(&spi->dev, DS3234_REG_CONTROL, &tmp);
- dev_info(&spi->dev, "Control Reg: 0x%02x\n", tmp);
-
- ds3234_get_reg(&spi->dev, DS3234_REG_CONT_STAT, &tmp);
- dev_info(&spi->dev, "Ctrl/Stat Reg: 0x%02x\n", tmp);
-
- rtc = devm_rtc_device_register(&spi->dev, "ds3234",
- &ds3234_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc))
- return PTR_ERR(rtc);
-
- spi_set_drvdata(spi, rtc);
-
- return 0;
-}
-
-static struct spi_driver ds3234_driver = {
- .driver = {
- .name = "ds3234",
- },
- .probe = ds3234_probe,
-};
-
-module_spi_driver(ds3234_driver);
-
-MODULE_DESCRIPTION("DS3234 SPI RTC driver");
-MODULE_AUTHOR("Dennis Aberilla <denzzzhome@yahoo.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("spi:ds3234");
diff --git a/drivers/rtc/rtc-generic.c b/drivers/rtc/rtc-generic.c
index e782ebd71..d726c6aa9 100644
--- a/drivers/rtc/rtc-generic.c
+++ b/drivers/rtc/rtc-generic.c
@@ -9,6 +9,8 @@
#include <linux/platform_device.h>
#include <linux/rtc.h>
+#if defined(CONFIG_M68K) || defined(CONFIG_PARISC) || \
+ defined(CONFIG_PPC) || defined(CONFIG_SUPERH32)
#include <asm/rtc.h>
static int generic_get_time(struct device *dev, struct rtc_time *tm)
@@ -33,13 +35,21 @@ static const struct rtc_class_ops generic_rtc_ops = {
.read_time = generic_get_time,
.set_time = generic_set_time,
};
+#else
+#define generic_rtc_ops *(struct rtc_class_ops*)NULL
+#endif
static int __init generic_rtc_probe(struct platform_device *dev)
{
struct rtc_device *rtc;
+ const struct rtc_class_ops *ops;
+
+ ops = dev_get_platdata(&dev->dev);
+ if (!ops)
+ ops = &generic_rtc_ops;
rtc = devm_rtc_device_register(&dev->dev, "rtc-generic",
- &generic_rtc_ops, THIS_MODULE);
+ ops, THIS_MODULE);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index a82937e2f..d107a8e72 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -176,7 +176,13 @@ static int m41t80_set_datetime(struct i2c_client *client, struct rtc_time *tm)
bin2bcd(tm->tm_mday) | (buf[M41T80_REG_DAY] & ~0x3f);
buf[M41T80_REG_MON] =
bin2bcd(tm->tm_mon + 1) | (buf[M41T80_REG_MON] & ~0x1f);
+
/* assume 20YY not 19YY */
+ if (tm->tm_year < 100 || tm->tm_year > 199) {
+ dev_err(&client->dev, "Year must be between 2000 and 2099. It's %d.\n",
+ tm->tm_year + 1900);
+ return -EINVAL;
+ }
buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year % 100);
if (i2c_transfer(client->adapter, msgs, 1) != 1) {
diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index 725dccae2..182fdd00e 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -1,5 +1,5 @@
/*
- * RTC driver for Maxim MAX77686
+ * RTC driver for Maxim MAX77686 and MAX77802
*
* Copyright (C) 2012 Samsung Electronics Co.Ltd
*
@@ -12,8 +12,7 @@
*
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
+#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/rtc.h>
#include <linux/delay.h>
@@ -24,24 +23,38 @@
#include <linux/irqdomain.h>
#include <linux/regmap.h>
+#define MAX77686_I2C_ADDR_RTC (0x0C >> 1)
+#define MAX77620_I2C_ADDR_RTC 0x68
+#define MAX77686_INVALID_I2C_ADDR (-1)
+
+/* Define non existing register */
+#define MAX77686_INVALID_REG (-1)
+
/* RTC Control Register */
#define BCD_EN_SHIFT 0
-#define BCD_EN_MASK (1 << BCD_EN_SHIFT)
+#define BCD_EN_MASK BIT(BCD_EN_SHIFT)
#define MODEL24_SHIFT 1
-#define MODEL24_MASK (1 << MODEL24_SHIFT)
+#define MODEL24_MASK BIT(MODEL24_SHIFT)
/* RTC Update Register1 */
#define RTC_UDR_SHIFT 0
-#define RTC_UDR_MASK (1 << RTC_UDR_SHIFT)
+#define RTC_UDR_MASK BIT(RTC_UDR_SHIFT)
#define RTC_RBUDR_SHIFT 4
-#define RTC_RBUDR_MASK (1 << RTC_RBUDR_SHIFT)
+#define RTC_RBUDR_MASK BIT(RTC_RBUDR_SHIFT)
/* RTC Hour register */
#define HOUR_PM_SHIFT 6
-#define HOUR_PM_MASK (1 << HOUR_PM_SHIFT)
+#define HOUR_PM_MASK BIT(HOUR_PM_SHIFT)
/* RTC Alarm Enable */
#define ALARM_ENABLE_SHIFT 7
-#define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT)
+#define ALARM_ENABLE_MASK BIT(ALARM_ENABLE_SHIFT)
-#define MAX77686_RTC_UPDATE_DELAY 16
+#define REG_RTC_NONE 0xdeadbeef
+
+/*
+ * MAX77802 has separate register (RTCAE1) for alarm enable instead
+ * using 1 bit from registers RTC{SEC,MIN,HOUR,DAY,MONTH,YEAR,DATE}
+ * as in done in MAX77686.
+ */
+#define MAX77802_ALARM_ENABLE_VALUE 0x77
enum {
RTC_SEC = 0,
@@ -54,15 +67,38 @@ enum {
RTC_NR_TIME
};
+struct max77686_rtc_driver_data {
+ /* Minimum usecs needed for a RTC update */
+ unsigned long delay;
+ /* Mask used to read RTC registers value */
+ u8 mask;
+ /* Registers offset to I2C addresses map */
+ const unsigned int *map;
+ /* Has a separate alarm enable register? */
+ bool alarm_enable_reg;
+ /* I2C address for RTC block */
+ int rtc_i2c_addr;
+ /* RTC interrupt via platform resource */
+ bool rtc_irq_from_platform;
+ /* Pending alarm status register */
+ int alarm_pending_status_reg;
+ /* RTC IRQ CHIP for regmap */
+ const struct regmap_irq_chip *rtc_irq_chip;
+};
+
struct max77686_rtc_info {
struct device *dev;
- struct max77686_dev *max77686;
struct i2c_client *rtc;
struct rtc_device *rtc_dev;
struct mutex lock;
struct regmap *regmap;
+ struct regmap *rtc_regmap;
+
+ const struct max77686_rtc_driver_data *drv_data;
+ struct regmap_irq_chip_data *rtc_irq_data;
+ int rtc_irq;
int virq;
int rtc_24hr_mode;
};
@@ -72,29 +108,190 @@ enum MAX77686_RTC_OP {
MAX77686_RTC_READ,
};
+/* These are not registers but just offsets that are mapped to addresses */
+enum max77686_rtc_reg_offset {
+ REG_RTC_CONTROLM = 0,
+ REG_RTC_CONTROL,
+ REG_RTC_UPDATE0,
+ REG_WTSR_SMPL_CNTL,
+ REG_RTC_SEC,
+ REG_RTC_MIN,
+ REG_RTC_HOUR,
+ REG_RTC_WEEKDAY,
+ REG_RTC_MONTH,
+ REG_RTC_YEAR,
+ REG_RTC_DATE,
+ REG_ALARM1_SEC,
+ REG_ALARM1_MIN,
+ REG_ALARM1_HOUR,
+ REG_ALARM1_WEEKDAY,
+ REG_ALARM1_MONTH,
+ REG_ALARM1_YEAR,
+ REG_ALARM1_DATE,
+ REG_ALARM2_SEC,
+ REG_ALARM2_MIN,
+ REG_ALARM2_HOUR,
+ REG_ALARM2_WEEKDAY,
+ REG_ALARM2_MONTH,
+ REG_ALARM2_YEAR,
+ REG_ALARM2_DATE,
+ REG_RTC_AE1,
+ REG_RTC_END,
+};
+
+/* Maps RTC registers offset to the MAX77686 register addresses */
+static const unsigned int max77686_map[REG_RTC_END] = {
+ [REG_RTC_CONTROLM] = MAX77686_RTC_CONTROLM,
+ [REG_RTC_CONTROL] = MAX77686_RTC_CONTROL,
+ [REG_RTC_UPDATE0] = MAX77686_RTC_UPDATE0,
+ [REG_WTSR_SMPL_CNTL] = MAX77686_WTSR_SMPL_CNTL,
+ [REG_RTC_SEC] = MAX77686_RTC_SEC,
+ [REG_RTC_MIN] = MAX77686_RTC_MIN,
+ [REG_RTC_HOUR] = MAX77686_RTC_HOUR,
+ [REG_RTC_WEEKDAY] = MAX77686_RTC_WEEKDAY,
+ [REG_RTC_MONTH] = MAX77686_RTC_MONTH,
+ [REG_RTC_YEAR] = MAX77686_RTC_YEAR,
+ [REG_RTC_DATE] = MAX77686_RTC_DATE,
+ [REG_ALARM1_SEC] = MAX77686_ALARM1_SEC,
+ [REG_ALARM1_MIN] = MAX77686_ALARM1_MIN,
+ [REG_ALARM1_HOUR] = MAX77686_ALARM1_HOUR,
+ [REG_ALARM1_WEEKDAY] = MAX77686_ALARM1_WEEKDAY,
+ [REG_ALARM1_MONTH] = MAX77686_ALARM1_MONTH,
+ [REG_ALARM1_YEAR] = MAX77686_ALARM1_YEAR,
+ [REG_ALARM1_DATE] = MAX77686_ALARM1_DATE,
+ [REG_ALARM2_SEC] = MAX77686_ALARM2_SEC,
+ [REG_ALARM2_MIN] = MAX77686_ALARM2_MIN,
+ [REG_ALARM2_HOUR] = MAX77686_ALARM2_HOUR,
+ [REG_ALARM2_WEEKDAY] = MAX77686_ALARM2_WEEKDAY,
+ [REG_ALARM2_MONTH] = MAX77686_ALARM2_MONTH,
+ [REG_ALARM2_YEAR] = MAX77686_ALARM2_YEAR,
+ [REG_ALARM2_DATE] = MAX77686_ALARM2_DATE,
+ [REG_RTC_AE1] = REG_RTC_NONE,
+};
+
+static const struct regmap_irq max77686_rtc_irqs[] = {
+ /* RTC interrupts */
+ REGMAP_IRQ_REG(0, 0, MAX77686_RTCINT_RTC60S_MSK),
+ REGMAP_IRQ_REG(1, 0, MAX77686_RTCINT_RTCA1_MSK),
+ REGMAP_IRQ_REG(2, 0, MAX77686_RTCINT_RTCA2_MSK),
+ REGMAP_IRQ_REG(3, 0, MAX77686_RTCINT_SMPL_MSK),
+ REGMAP_IRQ_REG(4, 0, MAX77686_RTCINT_RTC1S_MSK),
+ REGMAP_IRQ_REG(5, 0, MAX77686_RTCINT_WTSR_MSK),
+};
+
+static const struct regmap_irq_chip max77686_rtc_irq_chip = {
+ .name = "max77686-rtc",
+ .status_base = MAX77686_RTC_INT,
+ .mask_base = MAX77686_RTC_INTM,
+ .num_regs = 1,
+ .irqs = max77686_rtc_irqs,
+ .num_irqs = ARRAY_SIZE(max77686_rtc_irqs),
+};
+
+static const struct max77686_rtc_driver_data max77686_drv_data = {
+ .delay = 16000,
+ .mask = 0x7f,
+ .map = max77686_map,
+ .alarm_enable_reg = false,
+ .rtc_irq_from_platform = false,
+ .alarm_pending_status_reg = MAX77686_REG_STATUS2,
+ .rtc_i2c_addr = MAX77686_I2C_ADDR_RTC,
+ .rtc_irq_chip = &max77686_rtc_irq_chip,
+};
+
+static const struct max77686_rtc_driver_data max77620_drv_data = {
+ .delay = 16000,
+ .mask = 0x7f,
+ .map = max77686_map,
+ .alarm_enable_reg = false,
+ .rtc_irq_from_platform = true,
+ .alarm_pending_status_reg = MAX77686_INVALID_REG,
+ .rtc_i2c_addr = MAX77620_I2C_ADDR_RTC,
+ .rtc_irq_chip = &max77686_rtc_irq_chip,
+};
+
+static const unsigned int max77802_map[REG_RTC_END] = {
+ [REG_RTC_CONTROLM] = MAX77802_RTC_CONTROLM,
+ [REG_RTC_CONTROL] = MAX77802_RTC_CONTROL,
+ [REG_RTC_UPDATE0] = MAX77802_RTC_UPDATE0,
+ [REG_WTSR_SMPL_CNTL] = MAX77802_WTSR_SMPL_CNTL,
+ [REG_RTC_SEC] = MAX77802_RTC_SEC,
+ [REG_RTC_MIN] = MAX77802_RTC_MIN,
+ [REG_RTC_HOUR] = MAX77802_RTC_HOUR,
+ [REG_RTC_WEEKDAY] = MAX77802_RTC_WEEKDAY,
+ [REG_RTC_MONTH] = MAX77802_RTC_MONTH,
+ [REG_RTC_YEAR] = MAX77802_RTC_YEAR,
+ [REG_RTC_DATE] = MAX77802_RTC_DATE,
+ [REG_ALARM1_SEC] = MAX77802_ALARM1_SEC,
+ [REG_ALARM1_MIN] = MAX77802_ALARM1_MIN,
+ [REG_ALARM1_HOUR] = MAX77802_ALARM1_HOUR,
+ [REG_ALARM1_WEEKDAY] = MAX77802_ALARM1_WEEKDAY,
+ [REG_ALARM1_MONTH] = MAX77802_ALARM1_MONTH,
+ [REG_ALARM1_YEAR] = MAX77802_ALARM1_YEAR,
+ [REG_ALARM1_DATE] = MAX77802_ALARM1_DATE,
+ [REG_ALARM2_SEC] = MAX77802_ALARM2_SEC,
+ [REG_ALARM2_MIN] = MAX77802_ALARM2_MIN,
+ [REG_ALARM2_HOUR] = MAX77802_ALARM2_HOUR,
+ [REG_ALARM2_WEEKDAY] = MAX77802_ALARM2_WEEKDAY,
+ [REG_ALARM2_MONTH] = MAX77802_ALARM2_MONTH,
+ [REG_ALARM2_YEAR] = MAX77802_ALARM2_YEAR,
+ [REG_ALARM2_DATE] = MAX77802_ALARM2_DATE,
+ [REG_RTC_AE1] = MAX77802_RTC_AE1,
+};
+
+static const struct regmap_irq_chip max77802_rtc_irq_chip = {
+ .name = "max77802-rtc",
+ .status_base = MAX77802_RTC_INT,
+ .mask_base = MAX77802_RTC_INTM,
+ .num_regs = 1,
+ .irqs = max77686_rtc_irqs, /* same masks as 77686 */
+ .num_irqs = ARRAY_SIZE(max77686_rtc_irqs),
+};
+
+static const struct max77686_rtc_driver_data max77802_drv_data = {
+ .delay = 200,
+ .mask = 0xff,
+ .map = max77802_map,
+ .alarm_enable_reg = true,
+ .rtc_irq_from_platform = false,
+ .alarm_pending_status_reg = MAX77686_REG_STATUS2,
+ .rtc_i2c_addr = MAX77686_INVALID_I2C_ADDR,
+ .rtc_irq_chip = &max77802_rtc_irq_chip,
+};
+
static void max77686_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
- int rtc_24hr_mode)
+ struct max77686_rtc_info *info)
{
- tm->tm_sec = data[RTC_SEC] & 0x7f;
- tm->tm_min = data[RTC_MIN] & 0x7f;
- if (rtc_24hr_mode)
+ u8 mask = info->drv_data->mask;
+
+ tm->tm_sec = data[RTC_SEC] & mask;
+ tm->tm_min = data[RTC_MIN] & mask;
+ if (info->rtc_24hr_mode) {
tm->tm_hour = data[RTC_HOUR] & 0x1f;
- else {
+ } else {
tm->tm_hour = data[RTC_HOUR] & 0x0f;
if (data[RTC_HOUR] & HOUR_PM_MASK)
tm->tm_hour += 12;
}
/* Only a single bit is set in data[], so fls() would be equivalent */
- tm->tm_wday = ffs(data[RTC_WEEKDAY] & 0x7f) - 1;
+ tm->tm_wday = ffs(data[RTC_WEEKDAY] & mask) - 1;
tm->tm_mday = data[RTC_DATE] & 0x1f;
tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1;
- tm->tm_year = (data[RTC_YEAR] & 0x7f) + 100;
+ tm->tm_year = data[RTC_YEAR] & mask;
tm->tm_yday = 0;
tm->tm_isdst = 0;
+
+ /*
+ * MAX77686 uses 1 bit from sec/min/hour/etc RTC registers and the
+ * year values are just 0..99 so add 100 to support up to 2099.
+ */
+ if (!info->drv_data->alarm_enable_reg)
+ tm->tm_year += 100;
}
-static int max77686_rtc_tm_to_data(struct rtc_time *tm, u8 *data)
+static int max77686_rtc_tm_to_data(struct rtc_time *tm, u8 *data,
+ struct max77686_rtc_info *info)
{
data[RTC_SEC] = tm->tm_sec;
data[RTC_MIN] = tm->tm_min;
@@ -102,35 +299,44 @@ static int max77686_rtc_tm_to_data(struct rtc_time *tm, u8 *data)
data[RTC_WEEKDAY] = 1 << tm->tm_wday;
data[RTC_DATE] = tm->tm_mday;
data[RTC_MONTH] = tm->tm_mon + 1;
+
+ if (info->drv_data->alarm_enable_reg) {
+ data[RTC_YEAR] = tm->tm_year;
+ return 0;
+ }
+
data[RTC_YEAR] = tm->tm_year > 100 ? (tm->tm_year - 100) : 0;
if (tm->tm_year < 100) {
- pr_warn("RTC cannot handle the year %d. Assume it's 2000.\n",
+ dev_err(info->dev, "RTC cannot handle the year %d.\n",
1900 + tm->tm_year);
return -EINVAL;
}
+
return 0;
}
static int max77686_rtc_update(struct max77686_rtc_info *info,
- enum MAX77686_RTC_OP op)
+ enum MAX77686_RTC_OP op)
{
int ret;
unsigned int data;
+ unsigned long delay = info->drv_data->delay;
if (op == MAX77686_RTC_WRITE)
data = 1 << RTC_UDR_SHIFT;
else
data = 1 << RTC_RBUDR_SHIFT;
- ret = regmap_update_bits(info->max77686->rtc_regmap,
- MAX77686_RTC_UPDATE0, data, data);
+ ret = regmap_update_bits(info->rtc_regmap,
+ info->drv_data->map[REG_RTC_UPDATE0],
+ data, data);
if (ret < 0)
- dev_err(info->dev, "%s: fail to write update reg(ret=%d, data=0x%x)\n",
- __func__, ret, data);
+ dev_err(info->dev, "Fail to write update reg(ret=%d, data=0x%x)\n",
+ ret, data);
else {
- /* Minimum 16ms delay required before RTC update. */
- msleep(MAX77686_RTC_UPDATE_DELAY);
+ /* Minimum delay required before RTC update. */
+ usleep_range(delay, delay * 2);
}
return ret;
@@ -148,14 +354,15 @@ static int max77686_rtc_read_time(struct device *dev, struct rtc_time *tm)
if (ret < 0)
goto out;
- ret = regmap_bulk_read(info->max77686->rtc_regmap,
- MAX77686_RTC_SEC, data, RTC_NR_TIME);
+ ret = regmap_bulk_read(info->rtc_regmap,
+ info->drv_data->map[REG_RTC_SEC],
+ data, ARRAY_SIZE(data));
if (ret < 0) {
- dev_err(info->dev, "%s: fail to read time reg(%d)\n", __func__, ret);
+ dev_err(info->dev, "Fail to read time reg(%d)\n", ret);
goto out;
}
- max77686_rtc_data_to_tm(data, tm, info->rtc_24hr_mode);
+ max77686_rtc_data_to_tm(data, tm, info);
ret = rtc_valid_tm(tm);
@@ -170,17 +377,17 @@ static int max77686_rtc_set_time(struct device *dev, struct rtc_time *tm)
u8 data[RTC_NR_TIME];
int ret;
- ret = max77686_rtc_tm_to_data(tm, data);
+ ret = max77686_rtc_tm_to_data(tm, data, info);
if (ret < 0)
return ret;
mutex_lock(&info->lock);
- ret = regmap_bulk_write(info->max77686->rtc_regmap,
- MAX77686_RTC_SEC, data, RTC_NR_TIME);
+ ret = regmap_bulk_write(info->rtc_regmap,
+ info->drv_data->map[REG_RTC_SEC],
+ data, ARRAY_SIZE(data));
if (ret < 0) {
- dev_err(info->dev, "%s: fail to write time reg(%d)\n", __func__,
- ret);
+ dev_err(info->dev, "Fail to write time reg(%d)\n", ret);
goto out;
}
@@ -196,6 +403,7 @@ static int max77686_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
struct max77686_rtc_info *info = dev_get_drvdata(dev);
u8 data[RTC_NR_TIME];
unsigned int val;
+ const unsigned int *map = info->drv_data->map;
int i, ret;
mutex_lock(&info->lock);
@@ -204,29 +412,53 @@ static int max77686_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
if (ret < 0)
goto out;
- ret = regmap_bulk_read(info->max77686->rtc_regmap,
- MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
+ ret = regmap_bulk_read(info->rtc_regmap, map[REG_ALARM1_SEC],
+ data, ARRAY_SIZE(data));
if (ret < 0) {
- dev_err(info->dev, "%s:%d fail to read alarm reg(%d)\n",
- __func__, __LINE__, ret);
+ dev_err(info->dev, "Fail to read alarm reg(%d)\n", ret);
goto out;
}
- max77686_rtc_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
+ max77686_rtc_data_to_tm(data, &alrm->time, info);
alrm->enabled = 0;
- for (i = 0; i < RTC_NR_TIME; i++) {
- if (data[i] & ALARM_ENABLE_MASK) {
+
+ if (info->drv_data->alarm_enable_reg) {
+ if (map[REG_RTC_AE1] == REG_RTC_NONE) {
+ ret = -EINVAL;
+ dev_err(info->dev,
+ "alarm enable register not set(%d)\n", ret);
+ goto out;
+ }
+
+ ret = regmap_read(info->rtc_regmap, map[REG_RTC_AE1], &val);
+ if (ret < 0) {
+ dev_err(info->dev,
+ "fail to read alarm enable(%d)\n", ret);
+ goto out;
+ }
+
+ if (val)
alrm->enabled = 1;
- break;
+ } else {
+ for (i = 0; i < ARRAY_SIZE(data); i++) {
+ if (data[i] & ALARM_ENABLE_MASK) {
+ alrm->enabled = 1;
+ break;
+ }
}
}
alrm->pending = 0;
- ret = regmap_read(info->max77686->regmap, MAX77686_REG_STATUS2, &val);
+
+ if (info->drv_data->alarm_pending_status_reg == MAX77686_INVALID_REG)
+ goto out;
+
+ ret = regmap_read(info->regmap,
+ info->drv_data->alarm_pending_status_reg, &val);
if (ret < 0) {
- dev_err(info->dev, "%s:%d fail to read status2 reg(%d)\n",
- __func__, __LINE__, ret);
+ dev_err(info->dev,
+ "Fail to read alarm pending status reg(%d)\n", ret);
goto out;
}
@@ -235,7 +467,7 @@ static int max77686_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
out:
mutex_unlock(&info->lock);
- return 0;
+ return ret;
}
static int max77686_rtc_stop_alarm(struct max77686_rtc_info *info)
@@ -243,6 +475,7 @@ static int max77686_rtc_stop_alarm(struct max77686_rtc_info *info)
u8 data[RTC_NR_TIME];
int ret, i;
struct rtc_time tm;
+ const unsigned int *map = info->drv_data->map;
if (!mutex_is_locked(&info->lock))
dev_warn(info->dev, "%s: should have mutex locked\n", __func__);
@@ -251,24 +484,34 @@ static int max77686_rtc_stop_alarm(struct max77686_rtc_info *info)
if (ret < 0)
goto out;
- ret = regmap_bulk_read(info->max77686->rtc_regmap,
- MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
- if (ret < 0) {
- dev_err(info->dev, "%s: fail to read alarm reg(%d)\n",
- __func__, ret);
- goto out;
- }
+ if (info->drv_data->alarm_enable_reg) {
+ if (map[REG_RTC_AE1] == REG_RTC_NONE) {
+ ret = -EINVAL;
+ dev_err(info->dev,
+ "alarm enable register not set(%d)\n", ret);
+ goto out;
+ }
+
+ ret = regmap_write(info->rtc_regmap, map[REG_RTC_AE1], 0);
+ } else {
+ ret = regmap_bulk_read(info->rtc_regmap, map[REG_ALARM1_SEC],
+ data, ARRAY_SIZE(data));
+ if (ret < 0) {
+ dev_err(info->dev, "Fail to read alarm reg(%d)\n", ret);
+ goto out;
+ }
- max77686_rtc_data_to_tm(data, &tm, info->rtc_24hr_mode);
+ max77686_rtc_data_to_tm(data, &tm, info);
- for (i = 0; i < RTC_NR_TIME; i++)
- data[i] &= ~ALARM_ENABLE_MASK;
+ for (i = 0; i < ARRAY_SIZE(data); i++)
+ data[i] &= ~ALARM_ENABLE_MASK;
+
+ ret = regmap_bulk_write(info->rtc_regmap, map[REG_ALARM1_SEC],
+ data, ARRAY_SIZE(data));
+ }
- ret = regmap_bulk_write(info->max77686->rtc_regmap,
- MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
if (ret < 0) {
- dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
- __func__, ret);
+ dev_err(info->dev, "Fail to write alarm reg(%d)\n", ret);
goto out;
}
@@ -282,6 +525,7 @@ static int max77686_rtc_start_alarm(struct max77686_rtc_info *info)
u8 data[RTC_NR_TIME];
int ret;
struct rtc_time tm;
+ const unsigned int *map = info->drv_data->map;
if (!mutex_is_locked(&info->lock))
dev_warn(info->dev, "%s: should have mutex locked\n", __func__);
@@ -290,32 +534,36 @@ static int max77686_rtc_start_alarm(struct max77686_rtc_info *info)
if (ret < 0)
goto out;
- ret = regmap_bulk_read(info->max77686->rtc_regmap,
- MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
- if (ret < 0) {
- dev_err(info->dev, "%s: fail to read alarm reg(%d)\n",
- __func__, ret);
- goto out;
+ if (info->drv_data->alarm_enable_reg) {
+ ret = regmap_write(info->rtc_regmap, map[REG_RTC_AE1],
+ MAX77802_ALARM_ENABLE_VALUE);
+ } else {
+ ret = regmap_bulk_read(info->rtc_regmap, map[REG_ALARM1_SEC],
+ data, ARRAY_SIZE(data));
+ if (ret < 0) {
+ dev_err(info->dev, "Fail to read alarm reg(%d)\n", ret);
+ goto out;
+ }
+
+ max77686_rtc_data_to_tm(data, &tm, info);
+
+ data[RTC_SEC] |= (1 << ALARM_ENABLE_SHIFT);
+ data[RTC_MIN] |= (1 << ALARM_ENABLE_SHIFT);
+ data[RTC_HOUR] |= (1 << ALARM_ENABLE_SHIFT);
+ data[RTC_WEEKDAY] &= ~ALARM_ENABLE_MASK;
+ if (data[RTC_MONTH] & 0xf)
+ data[RTC_MONTH] |= (1 << ALARM_ENABLE_SHIFT);
+ if (data[RTC_YEAR] & info->drv_data->mask)
+ data[RTC_YEAR] |= (1 << ALARM_ENABLE_SHIFT);
+ if (data[RTC_DATE] & 0x1f)
+ data[RTC_DATE] |= (1 << ALARM_ENABLE_SHIFT);
+
+ ret = regmap_bulk_write(info->rtc_regmap, map[REG_ALARM1_SEC],
+ data, ARRAY_SIZE(data));
}
- max77686_rtc_data_to_tm(data, &tm, info->rtc_24hr_mode);
-
- data[RTC_SEC] |= (1 << ALARM_ENABLE_SHIFT);
- data[RTC_MIN] |= (1 << ALARM_ENABLE_SHIFT);
- data[RTC_HOUR] |= (1 << ALARM_ENABLE_SHIFT);
- data[RTC_WEEKDAY] &= ~ALARM_ENABLE_MASK;
- if (data[RTC_MONTH] & 0xf)
- data[RTC_MONTH] |= (1 << ALARM_ENABLE_SHIFT);
- if (data[RTC_YEAR] & 0x7f)
- data[RTC_YEAR] |= (1 << ALARM_ENABLE_SHIFT);
- if (data[RTC_DATE] & 0x1f)
- data[RTC_DATE] |= (1 << ALARM_ENABLE_SHIFT);
-
- ret = regmap_bulk_write(info->max77686->rtc_regmap,
- MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
if (ret < 0) {
- dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
- __func__, ret);
+ dev_err(info->dev, "Fail to write alarm reg(%d)\n", ret);
goto out;
}
@@ -330,7 +578,7 @@ static int max77686_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
u8 data[RTC_NR_TIME];
int ret;
- ret = max77686_rtc_tm_to_data(&alrm->time, data);
+ ret = max77686_rtc_tm_to_data(&alrm->time, data, info);
if (ret < 0)
return ret;
@@ -340,12 +588,12 @@ static int max77686_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
if (ret < 0)
goto out;
- ret = regmap_bulk_write(info->max77686->rtc_regmap,
- MAX77686_ALARM1_SEC, data, RTC_NR_TIME);
+ ret = regmap_bulk_write(info->rtc_regmap,
+ info->drv_data->map[REG_ALARM1_SEC],
+ data, ARRAY_SIZE(data));
if (ret < 0) {
- dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
- __func__, ret);
+ dev_err(info->dev, "Fail to write alarm reg(%d)\n", ret);
goto out;
}
@@ -361,7 +609,7 @@ out:
}
static int max77686_rtc_alarm_irq_enable(struct device *dev,
- unsigned int enabled)
+ unsigned int enabled)
{
struct max77686_rtc_info *info = dev_get_drvdata(dev);
int ret;
@@ -380,7 +628,7 @@ static irqreturn_t max77686_rtc_alarm_irq(int irq, void *data)
{
struct max77686_rtc_info *info = data;
- dev_info(info->dev, "%s:irq(%d)\n", __func__, irq);
+ dev_dbg(info->dev, "RTC alarm IRQ: %d\n", irq);
rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF);
@@ -406,10 +654,11 @@ static int max77686_rtc_init_reg(struct max77686_rtc_info *info)
info->rtc_24hr_mode = 1;
- ret = regmap_bulk_write(info->max77686->rtc_regmap, MAX77686_RTC_CONTROLM, data, 2);
+ ret = regmap_bulk_write(info->rtc_regmap,
+ info->drv_data->map[REG_RTC_CONTROLM],
+ data, ARRAY_SIZE(data));
if (ret < 0) {
- dev_err(info->dev, "%s: fail to write controlm reg(%d)\n",
- __func__, ret);
+ dev_err(info->dev, "Fail to write controlm reg(%d)\n", ret);
return ret;
}
@@ -417,28 +666,97 @@ static int max77686_rtc_init_reg(struct max77686_rtc_info *info)
return ret;
}
+static const struct regmap_config max77686_rtc_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int max77686_init_rtc_regmap(struct max77686_rtc_info *info)
+{
+ struct device *parent = info->dev->parent;
+ struct i2c_client *parent_i2c = to_i2c_client(parent);
+ int ret;
+
+ if (info->drv_data->rtc_irq_from_platform) {
+ struct platform_device *pdev = to_platform_device(info->dev);
+
+ info->rtc_irq = platform_get_irq(pdev, 0);
+ if (info->rtc_irq < 0) {
+ dev_err(info->dev, "Failed to get rtc interrupts: %d\n",
+ info->rtc_irq);
+ return info->rtc_irq;
+ }
+ } else {
+ info->rtc_irq = parent_i2c->irq;
+ }
+
+ info->regmap = dev_get_regmap(parent, NULL);
+ if (!info->regmap) {
+ dev_err(info->dev, "Failed to get rtc regmap\n");
+ return -ENODEV;
+ }
+
+ if (info->drv_data->rtc_i2c_addr == MAX77686_INVALID_I2C_ADDR) {
+ info->rtc_regmap = info->regmap;
+ goto add_rtc_irq;
+ }
+
+ info->rtc = i2c_new_dummy(parent_i2c->adapter,
+ info->drv_data->rtc_i2c_addr);
+ if (!info->rtc) {
+ dev_err(info->dev, "Failed to allocate I2C device for RTC\n");
+ return -ENODEV;
+ }
+
+ info->rtc_regmap = devm_regmap_init_i2c(info->rtc,
+ &max77686_rtc_regmap_config);
+ if (IS_ERR(info->rtc_regmap)) {
+ ret = PTR_ERR(info->rtc_regmap);
+ dev_err(info->dev, "Failed to allocate RTC regmap: %d\n", ret);
+ goto err_unregister_i2c;
+ }
+
+add_rtc_irq:
+ ret = regmap_add_irq_chip(info->rtc_regmap, info->rtc_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
+ IRQF_SHARED, 0, info->drv_data->rtc_irq_chip,
+ &info->rtc_irq_data);
+ if (ret < 0) {
+ dev_err(info->dev, "Failed to add RTC irq chip: %d\n", ret);
+ goto err_unregister_i2c;
+ }
+
+ return 0;
+
+err_unregister_i2c:
+ if (info->rtc)
+ i2c_unregister_device(info->rtc);
+ return ret;
+}
+
static int max77686_rtc_probe(struct platform_device *pdev)
{
- struct max77686_dev *max77686 = dev_get_drvdata(pdev->dev.parent);
struct max77686_rtc_info *info;
+ const struct platform_device_id *id = platform_get_device_id(pdev);
int ret;
- dev_info(&pdev->dev, "%s\n", __func__);
-
info = devm_kzalloc(&pdev->dev, sizeof(struct max77686_rtc_info),
- GFP_KERNEL);
+ GFP_KERNEL);
if (!info)
return -ENOMEM;
mutex_init(&info->lock);
info->dev = &pdev->dev;
- info->max77686 = max77686;
- info->rtc = max77686->rtc;
+ info->drv_data = (const struct max77686_rtc_driver_data *)
+ id->driver_data;
+
+ ret = max77686_init_rtc_regmap(info);
+ if (ret < 0)
+ return ret;
platform_set_drvdata(pdev, info);
ret = max77686_rtc_init_reg(info);
-
if (ret < 0) {
dev_err(&pdev->dev, "Failed to initialize RTC reg:%d\n", ret);
goto err_rtc;
@@ -446,7 +764,7 @@ static int max77686_rtc_probe(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 1);
- info->rtc_dev = devm_rtc_device_register(&pdev->dev, "max77686-rtc",
+ info->rtc_dev = devm_rtc_device_register(&pdev->dev, id->name,
&max77686_rtc_ops, THIS_MODULE);
if (IS_ERR(info->rtc_dev)) {
@@ -457,29 +775,43 @@ static int max77686_rtc_probe(struct platform_device *pdev)
goto err_rtc;
}
- if (!max77686->rtc_irq_data) {
- ret = -EINVAL;
- dev_err(&pdev->dev, "%s: no RTC regmap IRQ chip\n", __func__);
- goto err_rtc;
- }
-
- info->virq = regmap_irq_get_virq(max77686->rtc_irq_data,
+ info->virq = regmap_irq_get_virq(info->rtc_irq_data,
MAX77686_RTCIRQ_RTCA1);
if (info->virq <= 0) {
ret = -ENXIO;
goto err_rtc;
}
- ret = devm_request_threaded_irq(&pdev->dev, info->virq, NULL,
- max77686_rtc_alarm_irq, 0, "rtc-alarm1", info);
- if (ret < 0)
+ ret = request_threaded_irq(info->virq, NULL, max77686_rtc_alarm_irq, 0,
+ "rtc-alarm1", info);
+ if (ret < 0) {
dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
info->virq, ret);
+ goto err_rtc;
+ }
+
+ return 0;
err_rtc:
+ regmap_del_irq_chip(info->rtc_irq, info->rtc_irq_data);
+ if (info->rtc)
+ i2c_unregister_device(info->rtc);
+
return ret;
}
+static int max77686_rtc_remove(struct platform_device *pdev)
+{
+ struct max77686_rtc_info *info = platform_get_drvdata(pdev);
+
+ free_irq(info->virq, info);
+ regmap_del_irq_chip(info->rtc_irq, info->rtc_irq_data);
+ if (info->rtc)
+ i2c_unregister_device(info->rtc);
+
+ return 0;
+}
+
#ifdef CONFIG_PM_SLEEP
static int max77686_rtc_suspend(struct device *dev)
{
@@ -508,7 +840,9 @@ static SIMPLE_DEV_PM_OPS(max77686_rtc_pm_ops,
max77686_rtc_suspend, max77686_rtc_resume);
static const struct platform_device_id rtc_id[] = {
- { "max77686-rtc", 0 },
+ { "max77686-rtc", .driver_data = (kernel_ulong_t)&max77686_drv_data, },
+ { "max77802-rtc", .driver_data = (kernel_ulong_t)&max77802_drv_data, },
+ { "max77620-rtc", .driver_data = (kernel_ulong_t)&max77620_drv_data, },
{},
};
MODULE_DEVICE_TABLE(platform, rtc_id);
@@ -519,6 +853,7 @@ static struct platform_driver max77686_rtc_driver = {
.pm = &max77686_rtc_pm_ops,
},
.probe = max77686_rtc_probe,
+ .remove = max77686_rtc_remove,
.id_table = rtc_id,
};
diff --git a/drivers/rtc/rtc-max77802.c b/drivers/rtc/rtc-max77802.c
deleted file mode 100644
index 82ffcc5a5..000000000
--- a/drivers/rtc/rtc-max77802.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * RTC driver for Maxim MAX77802
- *
- * Copyright (C) 2013 Google, Inc
- *
- * Copyright (C) 2012 Samsung Electronics Co.Ltd
- *
- * based on rtc-max8997.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/slab.h>
-#include <linux/rtc.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/max77686-private.h>
-#include <linux/irqdomain.h>
-#include <linux/regmap.h>
-
-/* RTC Control Register */
-#define BCD_EN_SHIFT 0
-#define BCD_EN_MASK (1 << BCD_EN_SHIFT)
-#define MODEL24_SHIFT 1
-#define MODEL24_MASK (1 << MODEL24_SHIFT)
-/* RTC Update Register1 */
-#define RTC_UDR_SHIFT 0
-#define RTC_UDR_MASK (1 << RTC_UDR_SHIFT)
-#define RTC_RBUDR_SHIFT 4
-#define RTC_RBUDR_MASK (1 << RTC_RBUDR_SHIFT)
-/* RTC Hour register */
-#define HOUR_PM_SHIFT 6
-#define HOUR_PM_MASK (1 << HOUR_PM_SHIFT)
-/* RTC Alarm Enable */
-#define ALARM_ENABLE_SHIFT 7
-#define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT)
-
-/* For the RTCAE1 register, we write this value to enable the alarm */
-#define ALARM_ENABLE_VALUE 0x77
-
-#define MAX77802_RTC_UPDATE_DELAY_US 200
-
-enum {
- RTC_SEC = 0,
- RTC_MIN,
- RTC_HOUR,
- RTC_WEEKDAY,
- RTC_MONTH,
- RTC_YEAR,
- RTC_DATE,
- RTC_NR_TIME
-};
-
-struct max77802_rtc_info {
- struct device *dev;
- struct max77686_dev *max77802;
- struct i2c_client *rtc;
- struct rtc_device *rtc_dev;
- struct mutex lock;
-
- struct regmap *regmap;
-
- int virq;
- int rtc_24hr_mode;
-};
-
-enum MAX77802_RTC_OP {
- MAX77802_RTC_WRITE,
- MAX77802_RTC_READ,
-};
-
-static void max77802_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
- int rtc_24hr_mode)
-{
- tm->tm_sec = data[RTC_SEC] & 0xff;
- tm->tm_min = data[RTC_MIN] & 0xff;
- if (rtc_24hr_mode)
- tm->tm_hour = data[RTC_HOUR] & 0x1f;
- else {
- tm->tm_hour = data[RTC_HOUR] & 0x0f;
- if (data[RTC_HOUR] & HOUR_PM_MASK)
- tm->tm_hour += 12;
- }
-
- /* Only a single bit is set in data[], so fls() would be equivalent */
- tm->tm_wday = ffs(data[RTC_WEEKDAY] & 0xff) - 1;
- tm->tm_mday = data[RTC_DATE] & 0x1f;
- tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1;
-
- tm->tm_year = data[RTC_YEAR] & 0xff;
- tm->tm_yday = 0;
- tm->tm_isdst = 0;
-}
-
-static int max77802_rtc_tm_to_data(struct rtc_time *tm, u8 *data)
-{
- data[RTC_SEC] = tm->tm_sec;
- data[RTC_MIN] = tm->tm_min;
- data[RTC_HOUR] = tm->tm_hour;
- data[RTC_WEEKDAY] = 1 << tm->tm_wday;
- data[RTC_DATE] = tm->tm_mday;
- data[RTC_MONTH] = tm->tm_mon + 1;
- data[RTC_YEAR] = tm->tm_year;
-
- return 0;
-}
-
-static int max77802_rtc_update(struct max77802_rtc_info *info,
- enum MAX77802_RTC_OP op)
-{
- int ret;
- unsigned int data;
-
- if (op == MAX77802_RTC_WRITE)
- data = 1 << RTC_UDR_SHIFT;
- else
- data = 1 << RTC_RBUDR_SHIFT;
-
- ret = regmap_update_bits(info->max77802->regmap,
- MAX77802_RTC_UPDATE0, data, data);
- if (ret < 0)
- dev_err(info->dev, "%s: fail to write update reg(ret=%d, data=0x%x)\n",
- __func__, ret, data);
- else {
- /* Minimum delay required before RTC update. */
- usleep_range(MAX77802_RTC_UPDATE_DELAY_US,
- MAX77802_RTC_UPDATE_DELAY_US * 2);
- }
-
- return ret;
-}
-
-static int max77802_rtc_read_time(struct device *dev, struct rtc_time *tm)
-{
- struct max77802_rtc_info *info = dev_get_drvdata(dev);
- u8 data[RTC_NR_TIME];
- int ret;
-
- mutex_lock(&info->lock);
-
- ret = max77802_rtc_update(info, MAX77802_RTC_READ);
- if (ret < 0)
- goto out;
-
- ret = regmap_bulk_read(info->max77802->regmap,
- MAX77802_RTC_SEC, data, RTC_NR_TIME);
- if (ret < 0) {
- dev_err(info->dev, "%s: fail to read time reg(%d)\n", __func__,
- ret);
- goto out;
- }
-
- max77802_rtc_data_to_tm(data, tm, info->rtc_24hr_mode);
-
- ret = rtc_valid_tm(tm);
-
-out:
- mutex_unlock(&info->lock);
- return ret;
-}
-
-static int max77802_rtc_set_time(struct device *dev, struct rtc_time *tm)
-{
- struct max77802_rtc_info *info = dev_get_drvdata(dev);
- u8 data[RTC_NR_TIME];
- int ret;
-
- ret = max77802_rtc_tm_to_data(tm, data);
- if (ret < 0)
- return ret;
-
- mutex_lock(&info->lock);
-
- ret = regmap_bulk_write(info->max77802->regmap,
- MAX77802_RTC_SEC, data, RTC_NR_TIME);
- if (ret < 0) {
- dev_err(info->dev, "%s: fail to write time reg(%d)\n", __func__,
- ret);
- goto out;
- }
-
- ret = max77802_rtc_update(info, MAX77802_RTC_WRITE);
-
-out:
- mutex_unlock(&info->lock);
- return ret;
-}
-
-static int max77802_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-{
- struct max77802_rtc_info *info = dev_get_drvdata(dev);
- u8 data[RTC_NR_TIME];
- unsigned int val;
- int ret;
-
- mutex_lock(&info->lock);
-
- ret = max77802_rtc_update(info, MAX77802_RTC_READ);
- if (ret < 0)
- goto out;
-
- ret = regmap_bulk_read(info->max77802->regmap,
- MAX77802_ALARM1_SEC, data, RTC_NR_TIME);
- if (ret < 0) {
- dev_err(info->dev, "%s:%d fail to read alarm reg(%d)\n",
- __func__, __LINE__, ret);
- goto out;
- }
-
- max77802_rtc_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
-
- alrm->enabled = 0;
- ret = regmap_read(info->max77802->regmap,
- MAX77802_RTC_AE1, &val);
- if (ret < 0) {
- dev_err(info->dev, "%s:%d fail to read alarm enable(%d)\n",
- __func__, __LINE__, ret);
- goto out;
- }
- if (val)
- alrm->enabled = 1;
-
- alrm->pending = 0;
- ret = regmap_read(info->max77802->regmap, MAX77802_REG_STATUS2, &val);
- if (ret < 0) {
- dev_err(info->dev, "%s:%d fail to read status2 reg(%d)\n",
- __func__, __LINE__, ret);
- goto out;
- }
-
- if (val & (1 << 2)) /* RTCA1 */
- alrm->pending = 1;
-
-out:
- mutex_unlock(&info->lock);
- return 0;
-}
-
-static int max77802_rtc_stop_alarm(struct max77802_rtc_info *info)
-{
- int ret;
-
- if (!mutex_is_locked(&info->lock))
- dev_warn(info->dev, "%s: should have mutex locked\n", __func__);
-
- ret = max77802_rtc_update(info, MAX77802_RTC_READ);
- if (ret < 0)
- goto out;
-
- ret = regmap_write(info->max77802->regmap,
- MAX77802_RTC_AE1, 0);
- if (ret < 0) {
- dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
- __func__, ret);
- goto out;
- }
-
- ret = max77802_rtc_update(info, MAX77802_RTC_WRITE);
-out:
- return ret;
-}
-
-static int max77802_rtc_start_alarm(struct max77802_rtc_info *info)
-{
- int ret;
-
- if (!mutex_is_locked(&info->lock))
- dev_warn(info->dev, "%s: should have mutex locked\n",
- __func__);
-
- ret = max77802_rtc_update(info, MAX77802_RTC_READ);
- if (ret < 0)
- goto out;
-
- ret = regmap_write(info->max77802->regmap,
- MAX77802_RTC_AE1,
- ALARM_ENABLE_VALUE);
-
- if (ret < 0) {
- dev_err(info->dev, "%s: fail to read alarm reg(%d)\n",
- __func__, ret);
- goto out;
- }
-
- ret = max77802_rtc_update(info, MAX77802_RTC_WRITE);
-out:
- return ret;
-}
-
-static int max77802_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
-{
- struct max77802_rtc_info *info = dev_get_drvdata(dev);
- u8 data[RTC_NR_TIME];
- int ret;
-
- ret = max77802_rtc_tm_to_data(&alrm->time, data);
- if (ret < 0)
- return ret;
-
- mutex_lock(&info->lock);
-
- ret = max77802_rtc_stop_alarm(info);
- if (ret < 0)
- goto out;
-
- ret = regmap_bulk_write(info->max77802->regmap,
- MAX77802_ALARM1_SEC, data, RTC_NR_TIME);
-
- if (ret < 0) {
- dev_err(info->dev, "%s: fail to write alarm reg(%d)\n",
- __func__, ret);
- goto out;
- }
-
- ret = max77802_rtc_update(info, MAX77802_RTC_WRITE);
- if (ret < 0)
- goto out;
-
- if (alrm->enabled)
- ret = max77802_rtc_start_alarm(info);
-out:
- mutex_unlock(&info->lock);
- return ret;
-}
-
-static int max77802_rtc_alarm_irq_enable(struct device *dev,
- unsigned int enabled)
-{
- struct max77802_rtc_info *info = dev_get_drvdata(dev);
- int ret;
-
- mutex_lock(&info->lock);
- if (enabled)
- ret = max77802_rtc_start_alarm(info);
- else
- ret = max77802_rtc_stop_alarm(info);
- mutex_unlock(&info->lock);
-
- return ret;
-}
-
-static irqreturn_t max77802_rtc_alarm_irq(int irq, void *data)
-{
- struct max77802_rtc_info *info = data;
-
- dev_dbg(info->dev, "%s:irq(%d)\n", __func__, irq);
-
- rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF);
-
- return IRQ_HANDLED;
-}
-
-static const struct rtc_class_ops max77802_rtc_ops = {
- .read_time = max77802_rtc_read_time,
- .set_time = max77802_rtc_set_time,
- .read_alarm = max77802_rtc_read_alarm,
- .set_alarm = max77802_rtc_set_alarm,
- .alarm_irq_enable = max77802_rtc_alarm_irq_enable,
-};
-
-static int max77802_rtc_init_reg(struct max77802_rtc_info *info)
-{
- u8 data[2];
- int ret;
-
- max77802_rtc_update(info, MAX77802_RTC_READ);
-
- /* Set RTC control register : Binary mode, 24hour mdoe */
- data[0] = (1 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
- data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
-
- info->rtc_24hr_mode = 1;
-
- ret = regmap_bulk_write(info->max77802->regmap,
- MAX77802_RTC_CONTROLM, data, ARRAY_SIZE(data));
- if (ret < 0) {
- dev_err(info->dev, "%s: fail to write controlm reg(%d)\n",
- __func__, ret);
- return ret;
- }
-
- ret = max77802_rtc_update(info, MAX77802_RTC_WRITE);
- return ret;
-}
-
-static int max77802_rtc_probe(struct platform_device *pdev)
-{
- struct max77686_dev *max77802 = dev_get_drvdata(pdev->dev.parent);
- struct max77802_rtc_info *info;
- int ret;
-
- dev_dbg(&pdev->dev, "%s\n", __func__);
-
- info = devm_kzalloc(&pdev->dev, sizeof(struct max77802_rtc_info),
- GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- mutex_init(&info->lock);
- info->dev = &pdev->dev;
- info->max77802 = max77802;
- info->rtc = max77802->i2c;
-
- platform_set_drvdata(pdev, info);
-
- ret = max77802_rtc_init_reg(info);
-
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to initialize RTC reg:%d\n", ret);
- return ret;
- }
-
- device_init_wakeup(&pdev->dev, 1);
-
- info->rtc_dev = devm_rtc_device_register(&pdev->dev, "max77802-rtc",
- &max77802_rtc_ops, THIS_MODULE);
-
- if (IS_ERR(info->rtc_dev)) {
- ret = PTR_ERR(info->rtc_dev);
- dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
- if (ret == 0)
- ret = -EINVAL;
- return ret;
- }
-
- if (!max77802->rtc_irq_data) {
- dev_err(&pdev->dev, "No RTC regmap IRQ chip\n");
- return -EINVAL;
- }
-
- info->virq = regmap_irq_get_virq(max77802->rtc_irq_data,
- MAX77686_RTCIRQ_RTCA1);
-
- if (info->virq <= 0) {
- dev_err(&pdev->dev, "Failed to get virtual IRQ %d\n",
- MAX77686_RTCIRQ_RTCA1);
- return -EINVAL;
- }
-
- ret = devm_request_threaded_irq(&pdev->dev, info->virq, NULL,
- max77802_rtc_alarm_irq, 0, "rtc-alarm1",
- info);
- if (ret < 0)
- dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
- info->virq, ret);
-
- return ret;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int max77802_rtc_suspend(struct device *dev)
-{
- if (device_may_wakeup(dev)) {
- struct max77802_rtc_info *info = dev_get_drvdata(dev);
-
- return enable_irq_wake(info->virq);
- }
-
- return 0;
-}
-
-static int max77802_rtc_resume(struct device *dev)
-{
- if (device_may_wakeup(dev)) {
- struct max77802_rtc_info *info = dev_get_drvdata(dev);
-
- return disable_irq_wake(info->virq);
- }
-
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(max77802_rtc_pm_ops,
- max77802_rtc_suspend, max77802_rtc_resume);
-
-static const struct platform_device_id rtc_id[] = {
- { "max77802-rtc", 0 },
- {},
-};
-MODULE_DEVICE_TABLE(platform, rtc_id);
-
-static struct platform_driver max77802_rtc_driver = {
- .driver = {
- .name = "max77802-rtc",
- .pm = &max77802_rtc_pm_ops,
- },
- .probe = max77802_rtc_probe,
- .id_table = rtc_id,
-};
-
-module_platform_driver(max77802_rtc_driver);
-
-MODULE_DESCRIPTION("Maxim MAX77802 RTC driver");
-MODULE_AUTHOR("Simon Glass <sjg@chromium.org>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-mcp795.c b/drivers/rtc/rtc-mcp795.c
index 1c91ce8a6..025bb33b9 100644
--- a/drivers/rtc/rtc-mcp795.c
+++ b/drivers/rtc/rtc-mcp795.c
@@ -20,6 +20,7 @@
#include <linux/printk.h>
#include <linux/spi/spi.h>
#include <linux/rtc.h>
+#include <linux/of.h>
/* MCP795 Instructions, see datasheet table 3-1 */
#define MCP795_EEREAD 0x03
@@ -183,9 +184,18 @@ static int mcp795_probe(struct spi_device *spi)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id mcp795_of_match[] = {
+ { .compatible = "maxim,mcp795" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mcp795_of_match);
+#endif
+
static struct spi_driver mcp795_driver = {
.driver = {
.name = "rtc-mcp795",
+ .of_match_table = of_match_ptr(mcp795_of_match),
},
.probe = mcp795_probe,
};
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 06a5c52b2..44f622c3e 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -419,4 +419,3 @@ module_platform_driver(mtk_rtc_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Tianping Fang <tianping.fang@mediatek.com>");
MODULE_DESCRIPTION("RTC Driver for MediaTek MT6397 PMIC");
-MODULE_ALIAS("platform:mt6397-rtc");
diff --git a/drivers/rtc/rtc-palmas.c b/drivers/rtc/rtc-palmas.c
index 7ea2c471f..6080e0ede 100644
--- a/drivers/rtc/rtc-palmas.c
+++ b/drivers/rtc/rtc-palmas.c
@@ -311,8 +311,7 @@ static int palmas_rtc_probe(struct platform_device *pdev)
ret = devm_request_threaded_irq(&pdev->dev, palmas_rtc->irq, NULL,
palmas_rtc_interrupt,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT |
- IRQF_EARLY_RESUME,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
dev_name(&pdev->dev), palmas_rtc);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ request failed, err = %d\n", ret);
diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index ea8a31c91..da27738b1 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -48,6 +48,7 @@
#define DRV_VERSION "0.6"
+/* REGISTERS */
#define PCF2123_REG_CTRL1 (0x00) /* Control Register 1 */
#define PCF2123_REG_CTRL2 (0x01) /* Control Register 2 */
#define PCF2123_REG_SC (0x02) /* datetime */
@@ -57,10 +58,54 @@
#define PCF2123_REG_DW (0x06)
#define PCF2123_REG_MO (0x07)
#define PCF2123_REG_YR (0x08)
+#define PCF2123_REG_ALRM_MN (0x09) /* Alarm Registers */
+#define PCF2123_REG_ALRM_HR (0x0a)
+#define PCF2123_REG_ALRM_DM (0x0b)
+#define PCF2123_REG_ALRM_DW (0x0c)
+#define PCF2123_REG_OFFSET (0x0d) /* Clock Rate Offset Register */
+#define PCF2123_REG_TMR_CLKOUT (0x0e) /* Timer Registers */
+#define PCF2123_REG_CTDWN_TMR (0x0f)
+
+/* PCF2123_REG_CTRL1 BITS */
+#define CTRL1_CLEAR (0) /* Clear */
+#define CTRL1_CORR_INT BIT(1) /* Correction irq enable */
+#define CTRL1_12_HOUR BIT(2) /* 12 hour time */
+#define CTRL1_SW_RESET (BIT(3) | BIT(4) | BIT(6)) /* Software reset */
+#define CTRL1_STOP BIT(5) /* Stop the clock */
+#define CTRL1_EXT_TEST BIT(7) /* External clock test mode */
+
+/* PCF2123_REG_CTRL2 BITS */
+#define CTRL2_TIE BIT(0) /* Countdown timer irq enable */
+#define CTRL2_AIE BIT(1) /* Alarm irq enable */
+#define CTRL2_TF BIT(2) /* Countdown timer flag */
+#define CTRL2_AF BIT(3) /* Alarm flag */
+#define CTRL2_TI_TP BIT(4) /* Irq pin generates pulse */
+#define CTRL2_MSF BIT(5) /* Minute or second irq flag */
+#define CTRL2_SI BIT(6) /* Second irq enable */
+#define CTRL2_MI BIT(7) /* Minute irq enable */
+
+/* PCF2123_REG_SC BITS */
+#define OSC_HAS_STOPPED BIT(7) /* Clock has been stopped */
+
+/* PCF2123_REG_ALRM_XX BITS */
+#define ALRM_ENABLE BIT(7) /* MN, HR, DM, or DW alarm enable */
+
+/* PCF2123_REG_TMR_CLKOUT BITS */
+#define CD_TMR_4096KHZ (0) /* 4096 KHz countdown timer */
+#define CD_TMR_64HZ (1) /* 64 Hz countdown timer */
+#define CD_TMR_1HZ (2) /* 1 Hz countdown timer */
+#define CD_TMR_60th_HZ (3) /* 60th Hz countdown timer */
+#define CD_TMR_TE BIT(3) /* Countdown timer enable */
+
+/* PCF2123_REG_OFFSET BITS */
+#define OFFSET_SIGN_BIT BIT(6) /* 2's complement sign bit */
+#define OFFSET_COARSE BIT(7) /* Coarse mode offset */
+#define OFFSET_STEP (2170) /* Offset step in parts per billion */
+
+/* READ/WRITE ADDRESS BITS */
+#define PCF2123_WRITE BIT(4)
+#define PCF2123_READ (BIT(4) | BIT(7))
-#define PCF2123_SUBADDR (1 << 4)
-#define PCF2123_WRITE ((0 << 7) | PCF2123_SUBADDR)
-#define PCF2123_READ ((1 << 7) | PCF2123_SUBADDR)
static struct spi_driver pcf2123_driver;
@@ -84,12 +129,44 @@ static inline void pcf2123_delay_trec(void)
ndelay(30);
}
+static int pcf2123_read(struct device *dev, u8 reg, u8 *rxbuf, size_t size)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ int ret;
+
+ reg |= PCF2123_READ;
+ ret = spi_write_then_read(spi, &reg, 1, rxbuf, size);
+ pcf2123_delay_trec();
+
+ return ret;
+}
+
+static int pcf2123_write(struct device *dev, u8 *txbuf, size_t size)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ int ret;
+
+ txbuf[0] |= PCF2123_WRITE;
+ ret = spi_write(spi, txbuf, size);
+ pcf2123_delay_trec();
+
+ return ret;
+}
+
+static int pcf2123_write_reg(struct device *dev, u8 reg, u8 val)
+{
+ u8 txbuf[2];
+
+ txbuf[0] = reg;
+ txbuf[1] = val;
+ return pcf2123_write(dev, txbuf, sizeof(txbuf));
+}
+
static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
char *buffer)
{
- struct spi_device *spi = to_spi_device(dev);
struct pcf2123_sysfs_reg *r;
- u8 txbuf[1], rxbuf[1];
+ u8 rxbuf[1];
unsigned long reg;
int ret;
@@ -99,19 +176,16 @@ static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
if (ret)
return ret;
- txbuf[0] = PCF2123_READ | reg;
- ret = spi_write_then_read(spi, txbuf, 1, rxbuf, 1);
+ ret = pcf2123_read(dev, reg, rxbuf, 1);
if (ret < 0)
return -EIO;
- pcf2123_delay_trec();
+
return sprintf(buffer, "0x%x\n", rxbuf[0]);
}
static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
const char *buffer, size_t count) {
- struct spi_device *spi = to_spi_device(dev);
struct pcf2123_sysfs_reg *r;
- u8 txbuf[2];
unsigned long reg;
unsigned long val;
@@ -127,27 +201,78 @@ static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
if (ret)
return ret;
- txbuf[0] = PCF2123_WRITE | reg;
- txbuf[1] = val;
- ret = spi_write(spi, txbuf, sizeof(txbuf));
+ pcf2123_write_reg(dev, reg, val);
if (ret < 0)
return -EIO;
- pcf2123_delay_trec();
return count;
}
+static int pcf2123_read_offset(struct device *dev, long *offset)
+{
+ int ret;
+ s8 reg;
+
+ ret = pcf2123_read(dev, PCF2123_REG_OFFSET, &reg, 1);
+ if (ret < 0)
+ return ret;
+
+ if (reg & OFFSET_COARSE)
+ reg <<= 1; /* multiply by 2 and sign extend */
+ else
+ reg |= (reg & OFFSET_SIGN_BIT) << 1; /* sign extend only */
+
+ *offset = ((long)reg) * OFFSET_STEP;
+
+ return 0;
+}
+
+/*
+ * The offset register is a 7 bit signed value with a coarse bit in bit 7.
+ * The main difference between the two is normal offset adjusts the first
+ * second of n minutes every other hour, with 61, 62 and 63 being shoved
+ * into the 60th minute.
+ * The coarse adjustment does the same, but every hour.
+ * the two overlap, with every even normal offset value corresponding
+ * to a coarse offset. Based on this algorithm, it seems that despite the
+ * name, coarse offset is a better fit for overlapping values.
+ */
+static int pcf2123_set_offset(struct device *dev, long offset)
+{
+ s8 reg;
+
+ if (offset > OFFSET_STEP * 127)
+ reg = 127;
+ else if (offset < OFFSET_STEP * -128)
+ reg = -128;
+ else
+ reg = (s8)((offset + (OFFSET_STEP >> 1)) / OFFSET_STEP);
+
+ /* choose fine offset only for odd values in the normal range */
+ if (reg & 1 && reg <= 63 && reg >= -64) {
+ /* Normal offset. Clear the coarse bit */
+ reg &= ~OFFSET_COARSE;
+ } else {
+ /* Coarse offset. Divide by 2 and set the coarse bit */
+ reg >>= 1;
+ reg |= OFFSET_COARSE;
+ }
+
+ return pcf2123_write_reg(dev, PCF2123_REG_OFFSET, reg);
+}
+
static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- struct spi_device *spi = to_spi_device(dev);
- u8 txbuf[1], rxbuf[7];
+ u8 rxbuf[7];
int ret;
- txbuf[0] = PCF2123_READ | PCF2123_REG_SC;
- ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
- rxbuf, sizeof(rxbuf));
+ ret = pcf2123_read(dev, PCF2123_REG_SC, rxbuf, sizeof(rxbuf));
if (ret < 0)
return ret;
- pcf2123_delay_trec();
+
+ if (rxbuf[0] & OSC_HAS_STOPPED) {
+ dev_info(dev, "clock was stopped. Time is not valid\n");
+ return -EINVAL;
+ }
tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F);
tm->tm_min = bcd2bin(rxbuf[1] & 0x7F);
@@ -170,7 +295,6 @@ static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
- struct spi_device *spi = to_spi_device(dev);
u8 txbuf[8];
int ret;
@@ -181,15 +305,12 @@ static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
/* Stop the counter first */
- txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
- txbuf[1] = 0x20;
- ret = spi_write(spi, txbuf, 2);
+ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
if (ret < 0)
return ret;
- pcf2123_delay_trec();
/* Set the new time */
- txbuf[0] = PCF2123_WRITE | PCF2123_REG_SC;
+ txbuf[0] = PCF2123_REG_SC;
txbuf[1] = bin2bcd(tm->tm_sec & 0x7F);
txbuf[2] = bin2bcd(tm->tm_min & 0x7F);
txbuf[3] = bin2bcd(tm->tm_hour & 0x3F);
@@ -198,18 +319,48 @@ static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100);
- ret = spi_write(spi, txbuf, sizeof(txbuf));
+ ret = pcf2123_write(dev, txbuf, sizeof(txbuf));
if (ret < 0)
return ret;
- pcf2123_delay_trec();
/* Start the counter */
- txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
- txbuf[1] = 0x00;
- ret = spi_write(spi, txbuf, 2);
+ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int pcf2123_reset(struct device *dev)
+{
+ int ret;
+ u8 rxbuf[2];
+
+ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_SW_RESET);
+ if (ret < 0)
+ return ret;
+
+ /* Stop the counter */
+ dev_dbg(dev, "stopping RTC\n");
+ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
+ if (ret < 0)
+ return ret;
+
+ /* See if the counter was actually stopped */
+ dev_dbg(dev, "checking for presence of RTC\n");
+ ret = pcf2123_read(dev, PCF2123_REG_CTRL1, rxbuf, sizeof(rxbuf));
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(dev, "received data from RTC (0x%02X 0x%02X)\n",
+ rxbuf[0], rxbuf[1]);
+ if (!(rxbuf[0] & CTRL1_STOP))
+ return -ENODEV;
+
+ /* Start the counter */
+ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
if (ret < 0)
return ret;
- pcf2123_delay_trec();
return 0;
}
@@ -217,13 +368,16 @@ static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
static const struct rtc_class_ops pcf2123_rtc_ops = {
.read_time = pcf2123_rtc_read_time,
.set_time = pcf2123_rtc_set_time,
+ .read_offset = pcf2123_read_offset,
+ .set_offset = pcf2123_set_offset,
+
};
static int pcf2123_probe(struct spi_device *spi)
{
struct rtc_device *rtc;
+ struct rtc_time tm;
struct pcf2123_plat_data *pdata;
- u8 txbuf[2], rxbuf[2];
int ret, i;
pdata = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_plat_data),
@@ -232,56 +386,19 @@ static int pcf2123_probe(struct spi_device *spi)
return -ENOMEM;
spi->dev.platform_data = pdata;
- /* Send a software reset command */
- txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
- txbuf[1] = 0x58;
- dev_dbg(&spi->dev, "resetting RTC (0x%02X 0x%02X)\n",
- txbuf[0], txbuf[1]);
- ret = spi_write(spi, txbuf, 2 * sizeof(u8));
- if (ret < 0)
- goto kfree_exit;
- pcf2123_delay_trec();
-
- /* Stop the counter */
- txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
- txbuf[1] = 0x20;
- dev_dbg(&spi->dev, "stopping RTC (0x%02X 0x%02X)\n",
- txbuf[0], txbuf[1]);
- ret = spi_write(spi, txbuf, 2 * sizeof(u8));
- if (ret < 0)
- goto kfree_exit;
- pcf2123_delay_trec();
-
- /* See if the counter was actually stopped */
- txbuf[0] = PCF2123_READ | PCF2123_REG_CTRL1;
- dev_dbg(&spi->dev, "checking for presence of RTC (0x%02X)\n",
- txbuf[0]);
- ret = spi_write_then_read(spi, txbuf, 1 * sizeof(u8),
- rxbuf, 2 * sizeof(u8));
- dev_dbg(&spi->dev, "received data from RTC (0x%02X 0x%02X)\n",
- rxbuf[0], rxbuf[1]);
- if (ret < 0)
- goto kfree_exit;
- pcf2123_delay_trec();
-
- if (!(rxbuf[0] & 0x20)) {
- dev_err(&spi->dev, "chip not found\n");
- ret = -ENODEV;
- goto kfree_exit;
+ ret = pcf2123_rtc_read_time(&spi->dev, &tm);
+ if (ret < 0) {
+ ret = pcf2123_reset(&spi->dev);
+ if (ret < 0) {
+ dev_err(&spi->dev, "chip not found\n");
+ goto kfree_exit;
+ }
}
dev_info(&spi->dev, "chip found, driver version " DRV_VERSION "\n");
dev_info(&spi->dev, "spiclk %u KHz.\n",
(spi->max_speed_hz + 500) / 1000);
- /* Start the counter */
- txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
- txbuf[1] = 0x00;
- ret = spi_write(spi, txbuf, sizeof(txbuf));
- if (ret < 0)
- goto kfree_exit;
- pcf2123_delay_trec();
-
/* Finalize the initialization */
rtc = devm_rtc_device_register(&spi->dev, pcf2123_driver.driver.name,
&pcf2123_rtc_ops, THIS_MODULE);
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 629bfdf8c..2bfdf638b 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -1,12 +1,12 @@
/*
- * An I2C driver for the NXP PCF2127 RTC
+ * An I2C and SPI driver for the NXP PCF2127/29 RTC
* Copyright 2013 Til-Technologies
*
* Author: Renaud Cerrato <r.cerrato@til-technologies.fr>
*
* based on the other drivers in this same directory.
*
- * http://www.nxp.com/documents/data_sheet/PCF2127AT.pdf
+ * Datasheet: http://cache.nxp.com/documents/data_sheet/PCF2127.pdf
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -14,11 +14,13 @@
*/
#include <linux/i2c.h>
+#include <linux/spi/spi.h>
#include <linux/bcd.h>
#include <linux/rtc.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/regmap.h>
#define PCF2127_REG_CTRL1 (0x00) /* Control Register 1 */
#define PCF2127_REG_CTRL2 (0x01) /* Control Register 2 */
@@ -36,29 +38,30 @@
#define PCF2127_OSF BIT(7) /* Oscillator Fail flag */
-static struct i2c_driver pcf2127_driver;
-
struct pcf2127 {
struct rtc_device *rtc;
+ struct regmap *regmap;
};
/*
* In the routines that deal directly with the pcf2127 hardware, we use
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
*/
-static int pcf2127_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- unsigned char buf[10] = { PCF2127_REG_CTRL1 };
+ struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
+ unsigned char buf[10];
+ int ret;
- /* read registers */
- if (i2c_master_send(client, buf, 1) != 1 ||
- i2c_master_recv(client, buf, sizeof(buf)) != sizeof(buf)) {
- dev_err(&client->dev, "%s: read error\n", __func__);
- return -EIO;
+ ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL1, buf,
+ sizeof(buf));
+ if (ret) {
+ dev_err(dev, "%s: read error\n", __func__);
+ return ret;
}
if (buf[PCF2127_REG_CTRL3] & PCF2127_REG_CTRL3_BLF)
- dev_info(&client->dev,
+ dev_info(dev,
"low voltage detected, check/replace RTC battery.\n");
if (buf[PCF2127_REG_SC] & PCF2127_OSF) {
@@ -66,12 +69,12 @@ static int pcf2127_get_datetime(struct i2c_client *client, struct rtc_time *tm)
* no need clear the flag here,
* it will be cleared once the new date is saved
*/
- dev_warn(&client->dev,
+ dev_warn(dev,
"oscillator stop detected, date/time is not reliable\n");
return -EINVAL;
}
- dev_dbg(&client->dev,
+ dev_dbg(dev,
"%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, "
"sec=%02x, min=%02x, hr=%02x, "
"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
@@ -91,7 +94,7 @@ static int pcf2127_get_datetime(struct i2c_client *client, struct rtc_time *tm)
if (tm->tm_year < 70)
tm->tm_year += 100; /* assume we are in 1970...2069 */
- dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+ dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
@@ -100,20 +103,18 @@ static int pcf2127_get_datetime(struct i2c_client *client, struct rtc_time *tm)
return rtc_valid_tm(tm);
}
-static int pcf2127_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
- unsigned char buf[8];
+ struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
+ unsigned char buf[7];
int i = 0, err;
- dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+ dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
- /* start register address */
- buf[i++] = PCF2127_REG_SC;
-
/* hours, minutes and seconds */
buf[i++] = bin2bcd(tm->tm_sec); /* this will also clear OSF flag */
buf[i++] = bin2bcd(tm->tm_min);
@@ -128,11 +129,11 @@ static int pcf2127_set_datetime(struct i2c_client *client, struct rtc_time *tm)
buf[i++] = bin2bcd(tm->tm_year % 100);
/* write register's data */
- err = i2c_master_send(client, buf, i);
- if (err != i) {
- dev_err(&client->dev,
+ err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i);
+ if (err) {
+ dev_err(dev,
"%s: err=%d", __func__, err);
- return -EIO;
+ return err;
}
return 0;
@@ -142,26 +143,17 @@ static int pcf2127_set_datetime(struct i2c_client *client, struct rtc_time *tm)
static int pcf2127_rtc_ioctl(struct device *dev,
unsigned int cmd, unsigned long arg)
{
- struct i2c_client *client = to_i2c_client(dev);
- unsigned char buf = PCF2127_REG_CTRL3;
+ struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
int touser;
int ret;
switch (cmd) {
case RTC_VL_READ:
- ret = i2c_master_send(client, &buf, 1);
- if (!ret)
- ret = -EIO;
- if (ret < 0)
- return ret;
-
- ret = i2c_master_recv(client, &buf, 1);
- if (!ret)
- ret = -EIO;
- if (ret < 0)
+ ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &touser);
+ if (ret)
return ret;
- touser = buf & PCF2127_REG_CTRL3_BLF ? 1 : 0;
+ touser = touser & PCF2127_REG_CTRL3_BLF ? 1 : 0;
if (copy_to_user((void __user *)arg, &touser, sizeof(int)))
return -EFAULT;
@@ -174,71 +166,270 @@ static int pcf2127_rtc_ioctl(struct device *dev,
#define pcf2127_rtc_ioctl NULL
#endif
-static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
-{
- return pcf2127_get_datetime(to_i2c_client(dev), tm);
-}
-
-static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
-{
- return pcf2127_set_datetime(to_i2c_client(dev), tm);
-}
-
static const struct rtc_class_ops pcf2127_rtc_ops = {
.ioctl = pcf2127_rtc_ioctl,
.read_time = pcf2127_rtc_read_time,
.set_time = pcf2127_rtc_set_time,
};
-static int pcf2127_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int pcf2127_probe(struct device *dev, struct regmap *regmap,
+ const char *name)
{
struct pcf2127 *pcf2127;
- dev_dbg(&client->dev, "%s\n", __func__);
+ dev_dbg(dev, "%s\n", __func__);
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
- return -ENODEV;
-
- pcf2127 = devm_kzalloc(&client->dev, sizeof(struct pcf2127),
- GFP_KERNEL);
+ pcf2127 = devm_kzalloc(dev, sizeof(*pcf2127), GFP_KERNEL);
if (!pcf2127)
return -ENOMEM;
- i2c_set_clientdata(client, pcf2127);
+ pcf2127->regmap = regmap;
+
+ dev_set_drvdata(dev, pcf2127);
- pcf2127->rtc = devm_rtc_device_register(&client->dev,
- pcf2127_driver.driver.name,
- &pcf2127_rtc_ops, THIS_MODULE);
+ pcf2127->rtc = devm_rtc_device_register(dev, name, &pcf2127_rtc_ops,
+ THIS_MODULE);
return PTR_ERR_OR_ZERO(pcf2127->rtc);
}
-static const struct i2c_device_id pcf2127_id[] = {
- { "pcf2127", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, pcf2127_id);
-
#ifdef CONFIG_OF
static const struct of_device_id pcf2127_of_match[] = {
{ .compatible = "nxp,pcf2127" },
+ { .compatible = "nxp,pcf2129" },
{}
};
MODULE_DEVICE_TABLE(of, pcf2127_of_match);
#endif
-static struct i2c_driver pcf2127_driver = {
+#if IS_ENABLED(CONFIG_I2C)
+
+static int pcf2127_i2c_write(void *context, const void *data, size_t count)
+{
+ struct device *dev = context;
+ struct i2c_client *client = to_i2c_client(dev);
+ int ret;
+
+ ret = i2c_master_send(client, data, count);
+ if (ret != count)
+ return ret < 0 ? ret : -EIO;
+
+ return 0;
+}
+
+static int pcf2127_i2c_gather_write(void *context,
+ const void *reg, size_t reg_size,
+ const void *val, size_t val_size)
+{
+ struct device *dev = context;
+ struct i2c_client *client = to_i2c_client(dev);
+ int ret;
+ void *buf;
+
+ if (WARN_ON(reg_size != 1))
+ return -EINVAL;
+
+ buf = kmalloc(val_size + 1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ memcpy(buf, reg, 1);
+ memcpy(buf + 1, val, val_size);
+
+ ret = i2c_master_send(client, buf, val_size + 1);
+ if (ret != val_size + 1)
+ return ret < 0 ? ret : -EIO;
+
+ return 0;
+}
+
+static int pcf2127_i2c_read(void *context, const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct device *dev = context;
+ struct i2c_client *client = to_i2c_client(dev);
+ int ret;
+
+ if (WARN_ON(reg_size != 1))
+ return -EINVAL;
+
+ ret = i2c_master_send(client, reg, 1);
+ if (ret != 1)
+ return ret < 0 ? ret : -EIO;
+
+ ret = i2c_master_recv(client, val, val_size);
+ if (ret != val_size)
+ return ret < 0 ? ret : -EIO;
+
+ return 0;
+}
+
+/*
+ * The reason we need this custom regmap_bus instead of using regmap_init_i2c()
+ * is that the STOP condition is required between set register address and
+ * read register data when reading from registers.
+ */
+static const struct regmap_bus pcf2127_i2c_regmap = {
+ .write = pcf2127_i2c_write,
+ .gather_write = pcf2127_i2c_gather_write,
+ .read = pcf2127_i2c_read,
+};
+
+static struct i2c_driver pcf2127_i2c_driver;
+
+static int pcf2127_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+ static const struct regmap_config config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ };
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -ENODEV;
+
+ regmap = devm_regmap_init(&client->dev, &pcf2127_i2c_regmap,
+ &client->dev, &config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "%s: regmap allocation failed: %ld\n",
+ __func__, PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ return pcf2127_probe(&client->dev, regmap,
+ pcf2127_i2c_driver.driver.name);
+}
+
+static const struct i2c_device_id pcf2127_i2c_id[] = {
+ { "pcf2127", 0 },
+ { "pcf2129", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id);
+
+static struct i2c_driver pcf2127_i2c_driver = {
+ .driver = {
+ .name = "rtc-pcf2127-i2c",
+ .of_match_table = of_match_ptr(pcf2127_of_match),
+ },
+ .probe = pcf2127_i2c_probe,
+ .id_table = pcf2127_i2c_id,
+};
+
+static int pcf2127_i2c_register_driver(void)
+{
+ return i2c_add_driver(&pcf2127_i2c_driver);
+}
+
+static void pcf2127_i2c_unregister_driver(void)
+{
+ i2c_del_driver(&pcf2127_i2c_driver);
+}
+
+#else
+
+static int pcf2127_i2c_register_driver(void)
+{
+ return 0;
+}
+
+static void pcf2127_i2c_unregister_driver(void)
+{
+}
+
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_MASTER)
+
+static struct spi_driver pcf2127_spi_driver;
+
+static int pcf2127_spi_probe(struct spi_device *spi)
+{
+ static const struct regmap_config config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .read_flag_mask = 0xa0,
+ .write_flag_mask = 0x20,
+ };
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_spi(spi, &config);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
+ __func__, PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ return pcf2127_probe(&spi->dev, regmap, pcf2127_spi_driver.driver.name);
+}
+
+static const struct spi_device_id pcf2127_spi_id[] = {
+ { "pcf2127", 0 },
+ { "pcf2129", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, pcf2127_spi_id);
+
+static struct spi_driver pcf2127_spi_driver = {
.driver = {
- .name = "rtc-pcf2127",
+ .name = "rtc-pcf2127-spi",
.of_match_table = of_match_ptr(pcf2127_of_match),
},
- .probe = pcf2127_probe,
- .id_table = pcf2127_id,
+ .probe = pcf2127_spi_probe,
+ .id_table = pcf2127_spi_id,
};
-module_i2c_driver(pcf2127_driver);
+static int pcf2127_spi_register_driver(void)
+{
+ return spi_register_driver(&pcf2127_spi_driver);
+}
+
+static void pcf2127_spi_unregister_driver(void)
+{
+ spi_unregister_driver(&pcf2127_spi_driver);
+}
+
+#else
+
+static int pcf2127_spi_register_driver(void)
+{
+ return 0;
+}
+
+static void pcf2127_spi_unregister_driver(void)
+{
+}
+
+#endif
+
+static int __init pcf2127_init(void)
+{
+ int ret;
+
+ ret = pcf2127_i2c_register_driver();
+ if (ret) {
+ pr_err("Failed to register pcf2127 i2c driver: %d\n", ret);
+ return ret;
+ }
+
+ ret = pcf2127_spi_register_driver();
+ if (ret) {
+ pr_err("Failed to register pcf2127 spi driver: %d\n", ret);
+ pcf2127_i2c_unregister_driver();
+ }
+
+ return ret;
+}
+module_init(pcf2127_init)
+
+static void __exit pcf2127_exit(void)
+{
+ pcf2127_spi_unregister_driver();
+ pcf2127_i2c_unregister_driver();
+}
+module_exit(pcf2127_exit)
MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>");
-MODULE_DESCRIPTION("NXP PCF2127 RTC driver");
+MODULE_DESCRIPTION("NXP PCF2127/29 RTC driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index 63334cbec..e8ddbb359 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -16,12 +16,12 @@
#include <linux/rtc.h>
#include <linux/module.h>
-#define DRV_VERSION "0.0.1"
-
#define PCF85063_REG_CTRL1 0x00 /* status */
+#define PCF85063_REG_CTRL1_STOP BIT(5)
#define PCF85063_REG_CTRL2 0x01
#define PCF85063_REG_SC 0x04 /* datetime */
+#define PCF85063_REG_SC_OS 0x80
#define PCF85063_REG_MN 0x05
#define PCF85063_REG_HR 0x06
#define PCF85063_REG_DM 0x07
@@ -29,15 +29,31 @@
#define PCF85063_REG_MO 0x09
#define PCF85063_REG_YR 0x0A
-#define PCF85063_MO_C 0x80 /* century */
-
static struct i2c_driver pcf85063_driver;
-struct pcf85063 {
- struct rtc_device *rtc;
- int c_polarity; /* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
- int voltage_low; /* indicates if a low_voltage was detected */
-};
+static int pcf85063_stop_clock(struct i2c_client *client, u8 *ctrl1)
+{
+ s32 ret;
+
+ ret = i2c_smbus_read_byte_data(client, PCF85063_REG_CTRL1);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failing to stop the clock\n");
+ return -EIO;
+ }
+
+ /* stop the clock */
+ ret |= PCF85063_REG_CTRL1_STOP;
+
+ ret = i2c_smbus_write_byte_data(client, PCF85063_REG_CTRL1, ret);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failing to stop the clock\n");
+ return -EIO;
+ }
+
+ *ctrl1 = ret;
+
+ return 0;
+}
/*
* In the routines that deal directly with the pcf85063 hardware, we use
@@ -45,81 +61,85 @@ struct pcf85063 {
*/
static int pcf85063_get_datetime(struct i2c_client *client, struct rtc_time *tm)
{
- struct pcf85063 *pcf85063 = i2c_get_clientdata(client);
- unsigned char buf[13] = { PCF85063_REG_CTRL1 };
- struct i2c_msg msgs[] = {
- {/* setup read ptr */
- .addr = client->addr,
- .len = 1,
- .buf = buf
- },
- {/* read status + date */
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = 13,
- .buf = buf
- },
- };
-
- /* read registers */
- if ((i2c_transfer(client->adapter, msgs, 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __func__);
+ int rc;
+ u8 regs[7];
+
+ /*
+ * while reading, the time/date registers are blocked and not updated
+ * anymore until the access is finished. To not lose a second
+ * event, the access must be finished within one second. So, read all
+ * time/date registers in one turn.
+ */
+ rc = i2c_smbus_read_i2c_block_data(client, PCF85063_REG_SC,
+ sizeof(regs), regs);
+ if (rc != sizeof(regs)) {
+ dev_err(&client->dev, "date/time register read error\n");
return -EIO;
}
- tm->tm_sec = bcd2bin(buf[PCF85063_REG_SC] & 0x7F);
- tm->tm_min = bcd2bin(buf[PCF85063_REG_MN] & 0x7F);
- tm->tm_hour = bcd2bin(buf[PCF85063_REG_HR] & 0x3F); /* rtc hr 0-23 */
- tm->tm_mday = bcd2bin(buf[PCF85063_REG_DM] & 0x3F);
- tm->tm_wday = buf[PCF85063_REG_DW] & 0x07;
- tm->tm_mon = bcd2bin(buf[PCF85063_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
- tm->tm_year = bcd2bin(buf[PCF85063_REG_YR]);
+ /* if the clock has lost its power it makes no sense to use its time */
+ if (regs[0] & PCF85063_REG_SC_OS) {
+ dev_warn(&client->dev, "Power loss detected, invalid time\n");
+ return -EINVAL;
+ }
+
+ tm->tm_sec = bcd2bin(regs[0] & 0x7F);
+ tm->tm_min = bcd2bin(regs[1] & 0x7F);
+ tm->tm_hour = bcd2bin(regs[2] & 0x3F); /* rtc hr 0-23 */
+ tm->tm_mday = bcd2bin(regs[3] & 0x3F);
+ tm->tm_wday = regs[4] & 0x07;
+ tm->tm_mon = bcd2bin(regs[5] & 0x1F) - 1; /* rtc mn 1-12 */
+ tm->tm_year = bcd2bin(regs[6]);
if (tm->tm_year < 70)
tm->tm_year += 100; /* assume we are in 1970...2069 */
- /* detect the polarity heuristically. see note above. */
- pcf85063->c_polarity = (buf[PCF85063_REG_MO] & PCF85063_MO_C) ?
- (tm->tm_year >= 100) : (tm->tm_year < 100);
return rtc_valid_tm(tm);
}
static int pcf85063_set_datetime(struct i2c_client *client, struct rtc_time *tm)
{
- int i = 0, err = 0;
- unsigned char buf[11];
+ int rc;
+ u8 regs[8];
- /* Control & status */
- buf[PCF85063_REG_CTRL1] = 0;
- buf[PCF85063_REG_CTRL2] = 5;
+ /*
+ * to accurately set the time, reset the divider chain and keep it in
+ * reset state until all time/date registers are written
+ */
+ rc = pcf85063_stop_clock(client, &regs[7]);
+ if (rc != 0)
+ return rc;
/* hours, minutes and seconds */
- buf[PCF85063_REG_SC] = bin2bcd(tm->tm_sec) & 0x7F;
+ regs[0] = bin2bcd(tm->tm_sec) & 0x7F; /* clear OS flag */
- buf[PCF85063_REG_MN] = bin2bcd(tm->tm_min);
- buf[PCF85063_REG_HR] = bin2bcd(tm->tm_hour);
+ regs[1] = bin2bcd(tm->tm_min);
+ regs[2] = bin2bcd(tm->tm_hour);
/* Day of month, 1 - 31 */
- buf[PCF85063_REG_DM] = bin2bcd(tm->tm_mday);
+ regs[3] = bin2bcd(tm->tm_mday);
/* Day, 0 - 6 */
- buf[PCF85063_REG_DW] = tm->tm_wday & 0x07;
+ regs[4] = tm->tm_wday & 0x07;
/* month, 1 - 12 */
- buf[PCF85063_REG_MO] = bin2bcd(tm->tm_mon + 1);
+ regs[5] = bin2bcd(tm->tm_mon + 1);
/* year and century */
- buf[PCF85063_REG_YR] = bin2bcd(tm->tm_year % 100);
-
- /* write register's data */
- for (i = 0; i < sizeof(buf); i++) {
- unsigned char data[2] = { i, buf[i] };
-
- err = i2c_master_send(client, data, sizeof(data));
- if (err != sizeof(data)) {
- dev_err(&client->dev, "%s: err=%d addr=%02x, data=%02x\n",
- __func__, err, data[0], data[1]);
- return -EIO;
- }
+ regs[6] = bin2bcd(tm->tm_year % 100);
+
+ /*
+ * after all time/date registers are written, let the 'address auto
+ * increment' feature wrap around and write register CTRL1 to re-enable
+ * the clock divider chain again
+ */
+ regs[7] &= ~PCF85063_REG_CTRL1_STOP;
+
+ /* write all registers at once */
+ rc = i2c_smbus_write_i2c_block_data(client, PCF85063_REG_SC,
+ sizeof(regs), regs);
+ if (rc < 0) {
+ dev_err(&client->dev, "date/time register write error\n");
+ return rc;
}
return 0;
@@ -143,27 +163,18 @@ static const struct rtc_class_ops pcf85063_rtc_ops = {
static int pcf85063_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct pcf85063 *pcf85063;
+ struct rtc_device *rtc;
dev_dbg(&client->dev, "%s\n", __func__);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -ENODEV;
- pcf85063 = devm_kzalloc(&client->dev, sizeof(struct pcf85063),
- GFP_KERNEL);
- if (!pcf85063)
- return -ENOMEM;
-
- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-
- i2c_set_clientdata(client, pcf85063);
-
- pcf85063->rtc = devm_rtc_device_register(&client->dev,
- pcf85063_driver.driver.name,
- &pcf85063_rtc_ops, THIS_MODULE);
+ rtc = devm_rtc_device_register(&client->dev,
+ pcf85063_driver.driver.name,
+ &pcf85063_rtc_ops, THIS_MODULE);
- return PTR_ERR_OR_ZERO(pcf85063->rtc);
+ return PTR_ERR_OR_ZERO(rtc);
}
static const struct i2c_device_id pcf85063_id[] = {
@@ -194,4 +205,3 @@ module_i2c_driver(pcf85063_driver);
MODULE_AUTHOR("Søren Andersen <san@rosetechnology.dk>");
MODULE_DESCRIPTION("PCF85063 RTC driver");
MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c
index 988566caa..28c48b3c1 100644
--- a/drivers/rtc/rtc-pcf8523.c
+++ b/drivers/rtc/rtc-pcf8523.c
@@ -178,28 +178,8 @@ static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm)
if (err < 0)
return err;
- if (regs[0] & REG_SECONDS_OS) {
- /*
- * If the oscillator was stopped, try to clear the flag. Upon
- * power-up the flag is always set, but if we cannot clear it
- * the oscillator isn't running properly for some reason. The
- * sensible thing therefore is to return an error, signalling
- * that the clock cannot be assumed to be correct.
- */
-
- regs[0] &= ~REG_SECONDS_OS;
-
- err = pcf8523_write(client, REG_SECONDS, regs[0]);
- if (err < 0)
- return err;
-
- err = pcf8523_read(client, REG_SECONDS, &regs[0]);
- if (err < 0)
- return err;
-
- if (regs[0] & REG_SECONDS_OS)
- return -EAGAIN;
- }
+ if (regs[0] & REG_SECONDS_OS)
+ return -EINVAL;
tm->tm_sec = bcd2bin(regs[0] & 0x7f);
tm->tm_min = bcd2bin(regs[1] & 0x7f);
@@ -235,6 +215,7 @@ static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
return err;
regs[0] = REG_SECONDS;
+ /* This will purposely overwrite REG_SECONDS_OS */
regs[1] = bin2bcd(tm->tm_sec);
regs[2] = bin2bcd(tm->tm_min);
regs[3] = bin2bcd(tm->tm_hour);
diff --git a/drivers/rtc/rtc-pic32.c b/drivers/rtc/rtc-pic32.c
new file mode 100644
index 000000000..64e1e4578
--- /dev/null
+++ b/drivers/rtc/rtc-pic32.c
@@ -0,0 +1,411 @@
+/*
+ * PIC32 RTC driver
+ *
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2016 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#include <asm/mach-pic32/pic32.h>
+
+#define PIC32_RTCCON 0x00
+#define PIC32_RTCCON_ON BIT(15)
+#define PIC32_RTCCON_SIDL BIT(13)
+#define PIC32_RTCCON_RTCCLKSEL (3 << 9)
+#define PIC32_RTCCON_RTCCLKON BIT(6)
+#define PIC32_RTCCON_RTCWREN BIT(3)
+#define PIC32_RTCCON_RTCSYNC BIT(2)
+#define PIC32_RTCCON_HALFSEC BIT(1)
+#define PIC32_RTCCON_RTCOE BIT(0)
+
+#define PIC32_RTCALRM 0x10
+#define PIC32_RTCALRM_ALRMEN BIT(15)
+#define PIC32_RTCALRM_CHIME BIT(14)
+#define PIC32_RTCALRM_PIV BIT(13)
+#define PIC32_RTCALRM_ALARMSYNC BIT(12)
+#define PIC32_RTCALRM_AMASK 0x0F00
+#define PIC32_RTCALRM_ARPT 0xFF
+
+#define PIC32_RTCHOUR 0x23
+#define PIC32_RTCMIN 0x22
+#define PIC32_RTCSEC 0x21
+#define PIC32_RTCYEAR 0x33
+#define PIC32_RTCMON 0x32
+#define PIC32_RTCDAY 0x31
+
+#define PIC32_ALRMTIME 0x40
+#define PIC32_ALRMDATE 0x50
+
+#define PIC32_ALRMHOUR 0x43
+#define PIC32_ALRMMIN 0x42
+#define PIC32_ALRMSEC 0x41
+#define PIC32_ALRMYEAR 0x53
+#define PIC32_ALRMMON 0x52
+#define PIC32_ALRMDAY 0x51
+
+struct pic32_rtc_dev {
+ struct rtc_device *rtc;
+ void __iomem *reg_base;
+ struct clk *clk;
+ spinlock_t alarm_lock;
+ int alarm_irq;
+ bool alarm_clk_enabled;
+};
+
+static void pic32_rtc_alarm_clk_enable(struct pic32_rtc_dev *pdata,
+ bool enable)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pdata->alarm_lock, flags);
+ if (enable) {
+ if (!pdata->alarm_clk_enabled) {
+ clk_enable(pdata->clk);
+ pdata->alarm_clk_enabled = true;
+ }
+ } else {
+ if (pdata->alarm_clk_enabled) {
+ clk_disable(pdata->clk);
+ pdata->alarm_clk_enabled = false;
+ }
+ }
+ spin_unlock_irqrestore(&pdata->alarm_lock, flags);
+}
+
+static irqreturn_t pic32_rtc_alarmirq(int irq, void *id)
+{
+ struct pic32_rtc_dev *pdata = (struct pic32_rtc_dev *)id;
+
+ clk_enable(pdata->clk);
+ rtc_update_irq(pdata->rtc, 1, RTC_AF | RTC_IRQF);
+ clk_disable(pdata->clk);
+
+ pic32_rtc_alarm_clk_enable(pdata, false);
+
+ return IRQ_HANDLED;
+}
+
+static int pic32_rtc_setaie(struct device *dev, unsigned int enabled)
+{
+ struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+ void __iomem *base = pdata->reg_base;
+
+ clk_enable(pdata->clk);
+
+ writel(PIC32_RTCALRM_ALRMEN,
+ base + (enabled ? PIC32_SET(PIC32_RTCALRM) :
+ PIC32_CLR(PIC32_RTCALRM)));
+
+ clk_disable(pdata->clk);
+
+ pic32_rtc_alarm_clk_enable(pdata, enabled);
+
+ return 0;
+}
+
+static int pic32_rtc_setfreq(struct device *dev, int freq)
+{
+ struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+ void __iomem *base = pdata->reg_base;
+
+ clk_enable(pdata->clk);
+
+ writel(PIC32_RTCALRM_AMASK, base + PIC32_CLR(PIC32_RTCALRM));
+ writel(freq << 8, base + PIC32_SET(PIC32_RTCALRM));
+ writel(PIC32_RTCALRM_CHIME, base + PIC32_SET(PIC32_RTCALRM));
+
+ clk_disable(pdata->clk);
+
+ return 0;
+}
+
+static int pic32_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+ struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+ void __iomem *base = pdata->reg_base;
+ unsigned int tries = 0;
+
+ clk_enable(pdata->clk);
+
+ do {
+ rtc_tm->tm_hour = readb(base + PIC32_RTCHOUR);
+ rtc_tm->tm_min = readb(base + PIC32_RTCMIN);
+ rtc_tm->tm_mon = readb(base + PIC32_RTCMON);
+ rtc_tm->tm_mday = readb(base + PIC32_RTCDAY);
+ rtc_tm->tm_year = readb(base + PIC32_RTCYEAR);
+ rtc_tm->tm_sec = readb(base + PIC32_RTCSEC);
+
+ /*
+ * The only way to work out whether the system was mid-update
+ * when we read it is to check the second counter, and if it
+ * is zero, then we re-try the entire read.
+ */
+ tries += 1;
+ } while (rtc_tm->tm_sec == 0 && tries < 2);
+
+ rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
+ rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
+ rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
+ rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
+ rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon) - 1;
+ rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
+
+ rtc_tm->tm_year += 100;
+
+ dev_dbg(dev, "read time %04d.%02d.%02d %02d:%02d:%02d\n",
+ 1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
+ rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
+
+ clk_disable(pdata->clk);
+ return rtc_valid_tm(rtc_tm);
+}
+
+static int pic32_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+ struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+ void __iomem *base = pdata->reg_base;
+ int year = tm->tm_year - 100;
+
+ dev_dbg(dev, "set time %04d.%02d.%02d %02d:%02d:%02d\n",
+ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+ if (year < 0 || year >= 100) {
+ dev_err(dev, "rtc only supports 100 years\n");
+ return -EINVAL;
+ }
+
+ clk_enable(pdata->clk);
+ writeb(bin2bcd(tm->tm_sec), base + PIC32_RTCSEC);
+ writeb(bin2bcd(tm->tm_min), base + PIC32_RTCMIN);
+ writeb(bin2bcd(tm->tm_hour), base + PIC32_RTCHOUR);
+ writeb(bin2bcd(tm->tm_mday), base + PIC32_RTCDAY);
+ writeb(bin2bcd(tm->tm_mon + 1), base + PIC32_RTCMON);
+ writeb(bin2bcd(year), base + PIC32_RTCYEAR);
+ clk_disable(pdata->clk);
+
+ return 0;
+}
+
+static int pic32_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+ struct rtc_time *alm_tm = &alrm->time;
+ void __iomem *base = pdata->reg_base;
+ unsigned int alm_en;
+
+ clk_enable(pdata->clk);
+ alm_tm->tm_sec = readb(base + PIC32_ALRMSEC);
+ alm_tm->tm_min = readb(base + PIC32_ALRMMIN);
+ alm_tm->tm_hour = readb(base + PIC32_ALRMHOUR);
+ alm_tm->tm_mon = readb(base + PIC32_ALRMMON);
+ alm_tm->tm_mday = readb(base + PIC32_ALRMDAY);
+ alm_tm->tm_year = readb(base + PIC32_ALRMYEAR);
+
+ alm_en = readb(base + PIC32_RTCALRM);
+
+ alrm->enabled = (alm_en & PIC32_RTCALRM_ALRMEN) ? 1 : 0;
+
+ dev_dbg(dev, "getalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
+ alm_en,
+ 1900 + alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
+ alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
+
+ alm_tm->tm_sec = bcd2bin(alm_tm->tm_sec);
+ alm_tm->tm_min = bcd2bin(alm_tm->tm_min);
+ alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour);
+ alm_tm->tm_mday = bcd2bin(alm_tm->tm_mday);
+ alm_tm->tm_mon = bcd2bin(alm_tm->tm_mon) - 1;
+ alm_tm->tm_year = bcd2bin(alm_tm->tm_year);
+
+ clk_disable(pdata->clk);
+ return 0;
+}
+
+static int pic32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+ struct rtc_time *tm = &alrm->time;
+ void __iomem *base = pdata->reg_base;
+
+ clk_enable(pdata->clk);
+ dev_dbg(dev, "setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
+ alrm->enabled,
+ 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+ writel(0x00, base + PIC32_ALRMTIME);
+ writel(0x00, base + PIC32_ALRMDATE);
+
+ pic32_rtc_setaie(dev, alrm->enabled);
+
+ clk_disable(pdata->clk);
+ return 0;
+}
+
+static int pic32_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+ struct pic32_rtc_dev *pdata = dev_get_drvdata(dev);
+ void __iomem *base = pdata->reg_base;
+ unsigned int repeat;
+
+ clk_enable(pdata->clk);
+
+ repeat = readw(base + PIC32_RTCALRM);
+ repeat &= PIC32_RTCALRM_ARPT;
+ seq_printf(seq, "periodic_IRQ\t: %s\n", repeat ? "yes" : "no");
+
+ clk_disable(pdata->clk);
+ return 0;
+}
+
+static const struct rtc_class_ops pic32_rtcops = {
+ .read_time = pic32_rtc_gettime,
+ .set_time = pic32_rtc_settime,
+ .read_alarm = pic32_rtc_getalarm,
+ .set_alarm = pic32_rtc_setalarm,
+ .proc = pic32_rtc_proc,
+ .alarm_irq_enable = pic32_rtc_setaie,
+};
+
+static void pic32_rtc_enable(struct pic32_rtc_dev *pdata, int en)
+{
+ void __iomem *base = pdata->reg_base;
+
+ if (!base)
+ return;
+
+ clk_enable(pdata->clk);
+ if (!en) {
+ writel(PIC32_RTCCON_ON, base + PIC32_CLR(PIC32_RTCCON));
+ } else {
+ pic32_syskey_unlock();
+
+ writel(PIC32_RTCCON_RTCWREN, base + PIC32_SET(PIC32_RTCCON));
+ writel(3 << 9, base + PIC32_CLR(PIC32_RTCCON));
+
+ if (!(readl(base + PIC32_RTCCON) & PIC32_RTCCON_ON))
+ writel(PIC32_RTCCON_ON, base + PIC32_SET(PIC32_RTCCON));
+ }
+ clk_disable(pdata->clk);
+}
+
+static int pic32_rtc_remove(struct platform_device *pdev)
+{
+ struct pic32_rtc_dev *pdata = platform_get_drvdata(pdev);
+
+ pic32_rtc_setaie(&pdev->dev, 0);
+ clk_unprepare(pdata->clk);
+ pdata->clk = NULL;
+
+ return 0;
+}
+
+static int pic32_rtc_probe(struct platform_device *pdev)
+{
+ struct pic32_rtc_dev *pdata;
+ struct resource *res;
+ int ret;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pdata);
+
+ pdata->alarm_irq = platform_get_irq(pdev, 0);
+ if (pdata->alarm_irq < 0) {
+ dev_err(&pdev->dev, "no irq for alarm\n");
+ return pdata->alarm_irq;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pdata->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pdata->reg_base))
+ return PTR_ERR(pdata->reg_base);
+
+ pdata->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pdata->clk)) {
+ dev_err(&pdev->dev, "failed to find rtc clock source\n");
+ ret = PTR_ERR(pdata->clk);
+ pdata->clk = NULL;
+ return ret;
+ }
+
+ spin_lock_init(&pdata->alarm_lock);
+
+ clk_prepare_enable(pdata->clk);
+
+ pic32_rtc_enable(pdata, 1);
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+ &pic32_rtcops,
+ THIS_MODULE);
+ if (IS_ERR(pdata->rtc)) {
+ ret = PTR_ERR(pdata->rtc);
+ goto err_nortc;
+ }
+
+ pdata->rtc->max_user_freq = 128;
+
+ pic32_rtc_setfreq(&pdev->dev, 1);
+ ret = devm_request_irq(&pdev->dev, pdata->alarm_irq,
+ pic32_rtc_alarmirq, 0,
+ dev_name(&pdev->dev), pdata);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "IRQ %d error %d\n", pdata->alarm_irq, ret);
+ goto err_nortc;
+ }
+
+ clk_disable(pdata->clk);
+
+ return 0;
+
+err_nortc:
+ pic32_rtc_enable(pdata, 0);
+ clk_disable_unprepare(pdata->clk);
+
+ return ret;
+}
+
+static const struct of_device_id pic32_rtc_dt_ids[] = {
+ { .compatible = "microchip,pic32mzda-rtc" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pic32_rtc_dt_ids);
+
+static struct platform_driver pic32_rtc_driver = {
+ .probe = pic32_rtc_probe,
+ .remove = pic32_rtc_remove,
+ .driver = {
+ .name = "pic32-rtc",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pic32_rtc_dt_ids),
+ },
+};
+module_platform_driver(pic32_rtc_driver);
+
+MODULE_DESCRIPTION("Microchip PIC32 RTC Driver");
+MODULE_AUTHOR("Joshua Henderson <joshua.henderson@microchip.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c
index e9ac5a43b..d0cbf0804 100644
--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -1,7 +1,8 @@
/*
- * Micro Crystal RV-3029C2 rtc class driver
+ * Micro Crystal RV-3029 rtc class driver
*
* Author: Gregory Hermant <gregory.hermant@calao-systems.com>
+ * Michael Buesch <m@bues.ch>
*
* based on previously existing rtc class drivers
*
@@ -9,89 +10,120 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * NOTE: Currently this driver only supports the bare minimum for read
- * and write the RTC and alarms. The extra features provided by this chip
- * (trickle charger, eeprom, T° compensation) are unavailable.
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/bcd.h>
#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
/* Register map */
/* control section */
-#define RV3029C2_ONOFF_CTRL 0x00
-#define RV3029C2_IRQ_CTRL 0x01
-#define RV3029C2_IRQ_CTRL_AIE (1 << 0)
-#define RV3029C2_IRQ_FLAGS 0x02
-#define RV3029C2_IRQ_FLAGS_AF (1 << 0)
-#define RV3029C2_STATUS 0x03
-#define RV3029C2_STATUS_VLOW1 (1 << 2)
-#define RV3029C2_STATUS_VLOW2 (1 << 3)
-#define RV3029C2_STATUS_SR (1 << 4)
-#define RV3029C2_STATUS_PON (1 << 5)
-#define RV3029C2_STATUS_EEBUSY (1 << 7)
-#define RV3029C2_RST_CTRL 0x04
-#define RV3029C2_CONTROL_SECTION_LEN 0x05
+#define RV3029_ONOFF_CTRL 0x00
+#define RV3029_ONOFF_CTRL_WE BIT(0)
+#define RV3029_ONOFF_CTRL_TE BIT(1)
+#define RV3029_ONOFF_CTRL_TAR BIT(2)
+#define RV3029_ONOFF_CTRL_EERE BIT(3)
+#define RV3029_ONOFF_CTRL_SRON BIT(4)
+#define RV3029_ONOFF_CTRL_TD0 BIT(5)
+#define RV3029_ONOFF_CTRL_TD1 BIT(6)
+#define RV3029_ONOFF_CTRL_CLKINT BIT(7)
+#define RV3029_IRQ_CTRL 0x01
+#define RV3029_IRQ_CTRL_AIE BIT(0)
+#define RV3029_IRQ_CTRL_TIE BIT(1)
+#define RV3029_IRQ_CTRL_V1IE BIT(2)
+#define RV3029_IRQ_CTRL_V2IE BIT(3)
+#define RV3029_IRQ_CTRL_SRIE BIT(4)
+#define RV3029_IRQ_FLAGS 0x02
+#define RV3029_IRQ_FLAGS_AF BIT(0)
+#define RV3029_IRQ_FLAGS_TF BIT(1)
+#define RV3029_IRQ_FLAGS_V1IF BIT(2)
+#define RV3029_IRQ_FLAGS_V2IF BIT(3)
+#define RV3029_IRQ_FLAGS_SRF BIT(4)
+#define RV3029_STATUS 0x03
+#define RV3029_STATUS_VLOW1 BIT(2)
+#define RV3029_STATUS_VLOW2 BIT(3)
+#define RV3029_STATUS_SR BIT(4)
+#define RV3029_STATUS_PON BIT(5)
+#define RV3029_STATUS_EEBUSY BIT(7)
+#define RV3029_RST_CTRL 0x04
+#define RV3029_RST_CTRL_SYSR BIT(4)
+#define RV3029_CONTROL_SECTION_LEN 0x05
/* watch section */
-#define RV3029C2_W_SEC 0x08
-#define RV3029C2_W_MINUTES 0x09
-#define RV3029C2_W_HOURS 0x0A
-#define RV3029C2_REG_HR_12_24 (1<<6) /* 24h/12h mode */
-#define RV3029C2_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
-#define RV3029C2_W_DATE 0x0B
-#define RV3029C2_W_DAYS 0x0C
-#define RV3029C2_W_MONTHS 0x0D
-#define RV3029C2_W_YEARS 0x0E
-#define RV3029C2_WATCH_SECTION_LEN 0x07
+#define RV3029_W_SEC 0x08
+#define RV3029_W_MINUTES 0x09
+#define RV3029_W_HOURS 0x0A
+#define RV3029_REG_HR_12_24 BIT(6) /* 24h/12h mode */
+#define RV3029_REG_HR_PM BIT(5) /* PM/AM bit in 12h mode */
+#define RV3029_W_DATE 0x0B
+#define RV3029_W_DAYS 0x0C
+#define RV3029_W_MONTHS 0x0D
+#define RV3029_W_YEARS 0x0E
+#define RV3029_WATCH_SECTION_LEN 0x07
/* alarm section */
-#define RV3029C2_A_SC 0x10
-#define RV3029C2_A_MN 0x11
-#define RV3029C2_A_HR 0x12
-#define RV3029C2_A_DT 0x13
-#define RV3029C2_A_DW 0x14
-#define RV3029C2_A_MO 0x15
-#define RV3029C2_A_YR 0x16
-#define RV3029C2_ALARM_SECTION_LEN 0x07
+#define RV3029_A_SC 0x10
+#define RV3029_A_MN 0x11
+#define RV3029_A_HR 0x12
+#define RV3029_A_DT 0x13
+#define RV3029_A_DW 0x14
+#define RV3029_A_MO 0x15
+#define RV3029_A_YR 0x16
+#define RV3029_ALARM_SECTION_LEN 0x07
/* timer section */
-#define RV3029C2_TIMER_LOW 0x18
-#define RV3029C2_TIMER_HIGH 0x19
+#define RV3029_TIMER_LOW 0x18
+#define RV3029_TIMER_HIGH 0x19
/* temperature section */
-#define RV3029C2_TEMP_PAGE 0x20
+#define RV3029_TEMP_PAGE 0x20
/* eeprom data section */
-#define RV3029C2_E2P_EEDATA1 0x28
-#define RV3029C2_E2P_EEDATA2 0x29
+#define RV3029_E2P_EEDATA1 0x28
+#define RV3029_E2P_EEDATA2 0x29
+#define RV3029_E2PDATA_SECTION_LEN 0x02
/* eeprom control section */
-#define RV3029C2_CONTROL_E2P_EECTRL 0x30
-#define RV3029C2_TRICKLE_1K (1<<0) /* 1K resistance */
-#define RV3029C2_TRICKLE_5K (1<<1) /* 5K resistance */
-#define RV3029C2_TRICKLE_20K (1<<2) /* 20K resistance */
-#define RV3029C2_TRICKLE_80K (1<<3) /* 80K resistance */
-#define RV3029C2_CONTROL_E2P_XTALOFFSET 0x31
-#define RV3029C2_CONTROL_E2P_QCOEF 0x32
-#define RV3029C2_CONTROL_E2P_TURNOVER 0x33
+#define RV3029_CONTROL_E2P_EECTRL 0x30
+#define RV3029_EECTRL_THP BIT(0) /* temp scan interval */
+#define RV3029_EECTRL_THE BIT(1) /* thermometer enable */
+#define RV3029_EECTRL_FD0 BIT(2) /* CLKOUT */
+#define RV3029_EECTRL_FD1 BIT(3) /* CLKOUT */
+#define RV3029_TRICKLE_1K BIT(4) /* 1.5K resistance */
+#define RV3029_TRICKLE_5K BIT(5) /* 5K resistance */
+#define RV3029_TRICKLE_20K BIT(6) /* 20K resistance */
+#define RV3029_TRICKLE_80K BIT(7) /* 80K resistance */
+#define RV3029_TRICKLE_MASK (RV3029_TRICKLE_1K |\
+ RV3029_TRICKLE_5K |\
+ RV3029_TRICKLE_20K |\
+ RV3029_TRICKLE_80K)
+#define RV3029_TRICKLE_SHIFT 4
+#define RV3029_CONTROL_E2P_XOFFS 0x31 /* XTAL offset */
+#define RV3029_CONTROL_E2P_XOFFS_SIGN BIT(7) /* Sign: 1->pos, 0->neg */
+#define RV3029_CONTROL_E2P_QCOEF 0x32 /* XTAL temp drift coef */
+#define RV3029_CONTROL_E2P_TURNOVER 0x33 /* XTAL turnover temp (in *C) */
+#define RV3029_CONTROL_E2P_TOV_MASK 0x3F /* XTAL turnover temp mask */
/* user ram section */
-#define RV3029C2_USR1_RAM_PAGE 0x38
-#define RV3029C2_USR1_SECTION_LEN 0x04
-#define RV3029C2_USR2_RAM_PAGE 0x3C
-#define RV3029C2_USR2_SECTION_LEN 0x04
+#define RV3029_USR1_RAM_PAGE 0x38
+#define RV3029_USR1_SECTION_LEN 0x04
+#define RV3029_USR2_RAM_PAGE 0x3C
+#define RV3029_USR2_SECTION_LEN 0x04
static int
-rv3029c2_i2c_read_regs(struct i2c_client *client, u8 reg, u8 *buf,
- unsigned len)
+rv3029_i2c_read_regs(struct i2c_client *client, u8 reg, u8 *buf,
+ unsigned len)
{
int ret;
- if ((reg > RV3029C2_USR1_RAM_PAGE + 7) ||
- (reg + len > RV3029C2_USR1_RAM_PAGE + 8))
+ if ((reg > RV3029_USR1_RAM_PAGE + 7) ||
+ (reg + len > RV3029_USR1_RAM_PAGE + 8))
return -EINVAL;
ret = i2c_smbus_read_i2c_block_data(client, reg, len, buf);
@@ -103,20 +135,38 @@ rv3029c2_i2c_read_regs(struct i2c_client *client, u8 reg, u8 *buf,
}
static int
-rv3029c2_i2c_write_regs(struct i2c_client *client, u8 reg, u8 const buf[],
- unsigned len)
+rv3029_i2c_write_regs(struct i2c_client *client, u8 reg, u8 const buf[],
+ unsigned len)
{
- if ((reg > RV3029C2_USR1_RAM_PAGE + 7) ||
- (reg + len > RV3029C2_USR1_RAM_PAGE + 8))
+ if ((reg > RV3029_USR1_RAM_PAGE + 7) ||
+ (reg + len > RV3029_USR1_RAM_PAGE + 8))
return -EINVAL;
return i2c_smbus_write_i2c_block_data(client, reg, len, buf);
}
static int
-rv3029c2_i2c_get_sr(struct i2c_client *client, u8 *buf)
+rv3029_i2c_update_bits(struct i2c_client *client, u8 reg, u8 mask, u8 set)
+{
+ u8 buf;
+ int ret;
+
+ ret = rv3029_i2c_read_regs(client, reg, &buf, 1);
+ if (ret < 0)
+ return ret;
+ buf &= ~mask;
+ buf |= set & mask;
+ ret = rv3029_i2c_write_regs(client, reg, &buf, 1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int
+rv3029_i2c_get_sr(struct i2c_client *client, u8 *buf)
{
- int ret = rv3029c2_i2c_read_regs(client, RV3029C2_STATUS, buf, 1);
+ int ret = rv3029_i2c_read_regs(client, RV3029_STATUS, buf, 1);
if (ret < 0)
return -EIO;
@@ -125,83 +175,224 @@ rv3029c2_i2c_get_sr(struct i2c_client *client, u8 *buf)
}
static int
-rv3029c2_i2c_set_sr(struct i2c_client *client, u8 val)
+rv3029_i2c_set_sr(struct i2c_client *client, u8 val)
{
u8 buf[1];
int sr;
buf[0] = val;
- sr = rv3029c2_i2c_write_regs(client, RV3029C2_STATUS, buf, 1);
+ sr = rv3029_i2c_write_regs(client, RV3029_STATUS, buf, 1);
dev_dbg(&client->dev, "status = 0x%.2x (%d)\n", buf[0], buf[0]);
if (sr < 0)
return -EIO;
return 0;
}
+static int rv3029_eeprom_busywait(struct i2c_client *client)
+{
+ int i, ret;
+ u8 sr;
+
+ for (i = 100; i > 0; i--) {
+ ret = rv3029_i2c_get_sr(client, &sr);
+ if (ret < 0)
+ break;
+ if (!(sr & RV3029_STATUS_EEBUSY))
+ break;
+ usleep_range(1000, 10000);
+ }
+ if (i <= 0) {
+ dev_err(&client->dev, "EEPROM busy wait timeout.\n");
+ return -ETIMEDOUT;
+ }
+
+ return ret;
+}
+
+static int rv3029_eeprom_exit(struct i2c_client *client)
+{
+ /* Re-enable eeprom refresh */
+ return rv3029_i2c_update_bits(client, RV3029_ONOFF_CTRL,
+ RV3029_ONOFF_CTRL_EERE,
+ RV3029_ONOFF_CTRL_EERE);
+}
+
+static int rv3029_eeprom_enter(struct i2c_client *client)
+{
+ int ret;
+ u8 sr;
+
+ /* Check whether we are in the allowed voltage range. */
+ ret = rv3029_i2c_get_sr(client, &sr);
+ if (ret < 0)
+ return ret;
+ if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
+ /* We clear the bits and retry once just in case
+ * we had a brown out in early startup.
+ */
+ sr &= ~RV3029_STATUS_VLOW1;
+ sr &= ~RV3029_STATUS_VLOW2;
+ ret = rv3029_i2c_set_sr(client, sr);
+ if (ret < 0)
+ return ret;
+ usleep_range(1000, 10000);
+ ret = rv3029_i2c_get_sr(client, &sr);
+ if (ret < 0)
+ return ret;
+ if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
+ dev_err(&client->dev,
+ "Supply voltage is too low to safely access the EEPROM.\n");
+ return -ENODEV;
+ }
+ }
+
+ /* Disable eeprom refresh. */
+ ret = rv3029_i2c_update_bits(client, RV3029_ONOFF_CTRL,
+ RV3029_ONOFF_CTRL_EERE, 0);
+ if (ret < 0)
+ return ret;
+
+ /* Wait for any previous eeprom accesses to finish. */
+ ret = rv3029_eeprom_busywait(client);
+ if (ret < 0)
+ rv3029_eeprom_exit(client);
+
+ return ret;
+}
+
+static int rv3029_eeprom_read(struct i2c_client *client, u8 reg,
+ u8 buf[], size_t len)
+{
+ int ret, err;
+
+ err = rv3029_eeprom_enter(client);
+ if (err < 0)
+ return err;
+
+ ret = rv3029_i2c_read_regs(client, reg, buf, len);
+
+ err = rv3029_eeprom_exit(client);
+ if (err < 0)
+ return err;
+
+ return ret;
+}
+
+static int rv3029_eeprom_write(struct i2c_client *client, u8 reg,
+ u8 const buf[], size_t len)
+{
+ int ret, err;
+ size_t i;
+ u8 tmp;
+
+ err = rv3029_eeprom_enter(client);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < len; i++, reg++) {
+ ret = rv3029_i2c_read_regs(client, reg, &tmp, 1);
+ if (ret < 0)
+ break;
+ if (tmp != buf[i]) {
+ ret = rv3029_i2c_write_regs(client, reg, &buf[i], 1);
+ if (ret < 0)
+ break;
+ }
+ ret = rv3029_eeprom_busywait(client);
+ if (ret < 0)
+ break;
+ }
+
+ err = rv3029_eeprom_exit(client);
+ if (err < 0)
+ return err;
+
+ return ret;
+}
+
+static int rv3029_eeprom_update_bits(struct i2c_client *client,
+ u8 reg, u8 mask, u8 set)
+{
+ u8 buf;
+ int ret;
+
+ ret = rv3029_eeprom_read(client, reg, &buf, 1);
+ if (ret < 0)
+ return ret;
+ buf &= ~mask;
+ buf |= set & mask;
+ ret = rv3029_eeprom_write(client, reg, &buf, 1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
static int
-rv3029c2_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
+rv3029_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
{
u8 buf[1];
int ret;
- u8 regs[RV3029C2_WATCH_SECTION_LEN] = { 0, };
+ u8 regs[RV3029_WATCH_SECTION_LEN] = { 0, };
- ret = rv3029c2_i2c_get_sr(client, buf);
+ ret = rv3029_i2c_get_sr(client, buf);
if (ret < 0) {
dev_err(&client->dev, "%s: reading SR failed\n", __func__);
return -EIO;
}
- ret = rv3029c2_i2c_read_regs(client, RV3029C2_W_SEC , regs,
- RV3029C2_WATCH_SECTION_LEN);
+ ret = rv3029_i2c_read_regs(client, RV3029_W_SEC, regs,
+ RV3029_WATCH_SECTION_LEN);
if (ret < 0) {
dev_err(&client->dev, "%s: reading RTC section failed\n",
__func__);
return ret;
}
- tm->tm_sec = bcd2bin(regs[RV3029C2_W_SEC-RV3029C2_W_SEC]);
- tm->tm_min = bcd2bin(regs[RV3029C2_W_MINUTES-RV3029C2_W_SEC]);
+ tm->tm_sec = bcd2bin(regs[RV3029_W_SEC-RV3029_W_SEC]);
+ tm->tm_min = bcd2bin(regs[RV3029_W_MINUTES-RV3029_W_SEC]);
/* HR field has a more complex interpretation */
{
- const u8 _hr = regs[RV3029C2_W_HOURS-RV3029C2_W_SEC];
- if (_hr & RV3029C2_REG_HR_12_24) {
+ const u8 _hr = regs[RV3029_W_HOURS-RV3029_W_SEC];
+
+ if (_hr & RV3029_REG_HR_12_24) {
/* 12h format */
tm->tm_hour = bcd2bin(_hr & 0x1f);
- if (_hr & RV3029C2_REG_HR_PM) /* PM flag set */
+ if (_hr & RV3029_REG_HR_PM) /* PM flag set */
tm->tm_hour += 12;
} else /* 24h format */
tm->tm_hour = bcd2bin(_hr & 0x3f);
}
- tm->tm_mday = bcd2bin(regs[RV3029C2_W_DATE-RV3029C2_W_SEC]);
- tm->tm_mon = bcd2bin(regs[RV3029C2_W_MONTHS-RV3029C2_W_SEC]) - 1;
- tm->tm_year = bcd2bin(regs[RV3029C2_W_YEARS-RV3029C2_W_SEC]) + 100;
- tm->tm_wday = bcd2bin(regs[RV3029C2_W_DAYS-RV3029C2_W_SEC]) - 1;
+ tm->tm_mday = bcd2bin(regs[RV3029_W_DATE-RV3029_W_SEC]);
+ tm->tm_mon = bcd2bin(regs[RV3029_W_MONTHS-RV3029_W_SEC]) - 1;
+ tm->tm_year = bcd2bin(regs[RV3029_W_YEARS-RV3029_W_SEC]) + 100;
+ tm->tm_wday = bcd2bin(regs[RV3029_W_DAYS-RV3029_W_SEC]) - 1;
return 0;
}
-static int rv3029c2_rtc_read_time(struct device *dev, struct rtc_time *tm)
+static int rv3029_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- return rv3029c2_i2c_read_time(to_i2c_client(dev), tm);
+ return rv3029_i2c_read_time(to_i2c_client(dev), tm);
}
static int
-rv3029c2_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
+rv3029_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
{
struct rtc_time *const tm = &alarm->time;
int ret;
u8 regs[8];
- ret = rv3029c2_i2c_get_sr(client, regs);
+ ret = rv3029_i2c_get_sr(client, regs);
if (ret < 0) {
dev_err(&client->dev, "%s: reading SR failed\n", __func__);
return -EIO;
}
- ret = rv3029c2_i2c_read_regs(client, RV3029C2_A_SC, regs,
- RV3029C2_ALARM_SECTION_LEN);
+ ret = rv3029_i2c_read_regs(client, RV3029_A_SC, regs,
+ RV3029_ALARM_SECTION_LEN);
if (ret < 0) {
dev_err(&client->dev, "%s: reading alarm section failed\n",
@@ -209,51 +400,42 @@ rv3029c2_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
return ret;
}
- tm->tm_sec = bcd2bin(regs[RV3029C2_A_SC-RV3029C2_A_SC] & 0x7f);
- tm->tm_min = bcd2bin(regs[RV3029C2_A_MN-RV3029C2_A_SC] & 0x7f);
- tm->tm_hour = bcd2bin(regs[RV3029C2_A_HR-RV3029C2_A_SC] & 0x3f);
- tm->tm_mday = bcd2bin(regs[RV3029C2_A_DT-RV3029C2_A_SC] & 0x3f);
- tm->tm_mon = bcd2bin(regs[RV3029C2_A_MO-RV3029C2_A_SC] & 0x1f) - 1;
- tm->tm_year = bcd2bin(regs[RV3029C2_A_YR-RV3029C2_A_SC] & 0x7f) + 100;
- tm->tm_wday = bcd2bin(regs[RV3029C2_A_DW-RV3029C2_A_SC] & 0x07) - 1;
+ tm->tm_sec = bcd2bin(regs[RV3029_A_SC-RV3029_A_SC] & 0x7f);
+ tm->tm_min = bcd2bin(regs[RV3029_A_MN-RV3029_A_SC] & 0x7f);
+ tm->tm_hour = bcd2bin(regs[RV3029_A_HR-RV3029_A_SC] & 0x3f);
+ tm->tm_mday = bcd2bin(regs[RV3029_A_DT-RV3029_A_SC] & 0x3f);
+ tm->tm_mon = bcd2bin(regs[RV3029_A_MO-RV3029_A_SC] & 0x1f) - 1;
+ tm->tm_year = bcd2bin(regs[RV3029_A_YR-RV3029_A_SC] & 0x7f) + 100;
+ tm->tm_wday = bcd2bin(regs[RV3029_A_DW-RV3029_A_SC] & 0x07) - 1;
return 0;
}
static int
-rv3029c2_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+rv3029_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- return rv3029c2_i2c_read_alarm(to_i2c_client(dev), alarm);
+ return rv3029_i2c_read_alarm(to_i2c_client(dev), alarm);
}
-static int rv3029c2_rtc_i2c_alarm_set_irq(struct i2c_client *client,
+static int rv3029_rtc_i2c_alarm_set_irq(struct i2c_client *client,
int enable)
{
int ret;
- u8 buf[1];
-
- /* enable AIE irq */
- ret = rv3029c2_i2c_read_regs(client, RV3029C2_IRQ_CTRL, buf, 1);
- if (ret < 0) {
- dev_err(&client->dev, "can't read INT reg\n");
- return ret;
- }
- if (enable)
- buf[0] |= RV3029C2_IRQ_CTRL_AIE;
- else
- buf[0] &= ~RV3029C2_IRQ_CTRL_AIE;
- ret = rv3029c2_i2c_write_regs(client, RV3029C2_IRQ_CTRL, buf, 1);
+ /* enable/disable AIE irq */
+ ret = rv3029_i2c_update_bits(client, RV3029_IRQ_CTRL,
+ RV3029_IRQ_CTRL_AIE,
+ (enable ? RV3029_IRQ_CTRL_AIE : 0));
if (ret < 0) {
- dev_err(&client->dev, "can't set INT reg\n");
+ dev_err(&client->dev, "can't update INT reg\n");
return ret;
}
return 0;
}
-static int rv3029c2_rtc_i2c_set_alarm(struct i2c_client *client,
- struct rtc_wkalrm *alarm)
+static int rv3029_rtc_i2c_set_alarm(struct i2c_client *client,
+ struct rtc_wkalrm *alarm)
{
struct rtc_time *const tm = &alarm->time;
int ret;
@@ -267,50 +449,41 @@ static int rv3029c2_rtc_i2c_set_alarm(struct i2c_client *client,
if (tm->tm_year < 100)
return -EINVAL;
- ret = rv3029c2_i2c_get_sr(client, regs);
+ ret = rv3029_i2c_get_sr(client, regs);
if (ret < 0) {
dev_err(&client->dev, "%s: reading SR failed\n", __func__);
return -EIO;
}
- regs[RV3029C2_A_SC-RV3029C2_A_SC] = bin2bcd(tm->tm_sec & 0x7f);
- regs[RV3029C2_A_MN-RV3029C2_A_SC] = bin2bcd(tm->tm_min & 0x7f);
- regs[RV3029C2_A_HR-RV3029C2_A_SC] = bin2bcd(tm->tm_hour & 0x3f);
- regs[RV3029C2_A_DT-RV3029C2_A_SC] = bin2bcd(tm->tm_mday & 0x3f);
- regs[RV3029C2_A_MO-RV3029C2_A_SC] = bin2bcd((tm->tm_mon & 0x1f) - 1);
- regs[RV3029C2_A_DW-RV3029C2_A_SC] = bin2bcd((tm->tm_wday & 7) - 1);
- regs[RV3029C2_A_YR-RV3029C2_A_SC] = bin2bcd((tm->tm_year & 0x7f) - 100);
-
- ret = rv3029c2_i2c_write_regs(client, RV3029C2_A_SC, regs,
- RV3029C2_ALARM_SECTION_LEN);
+ regs[RV3029_A_SC-RV3029_A_SC] = bin2bcd(tm->tm_sec & 0x7f);
+ regs[RV3029_A_MN-RV3029_A_SC] = bin2bcd(tm->tm_min & 0x7f);
+ regs[RV3029_A_HR-RV3029_A_SC] = bin2bcd(tm->tm_hour & 0x3f);
+ regs[RV3029_A_DT-RV3029_A_SC] = bin2bcd(tm->tm_mday & 0x3f);
+ regs[RV3029_A_MO-RV3029_A_SC] = bin2bcd((tm->tm_mon & 0x1f) - 1);
+ regs[RV3029_A_DW-RV3029_A_SC] = bin2bcd((tm->tm_wday & 7) - 1);
+ regs[RV3029_A_YR-RV3029_A_SC] = bin2bcd((tm->tm_year & 0x7f) - 100);
+
+ ret = rv3029_i2c_write_regs(client, RV3029_A_SC, regs,
+ RV3029_ALARM_SECTION_LEN);
if (ret < 0)
return ret;
if (alarm->enabled) {
- u8 buf[1];
-
/* clear AF flag */
- ret = rv3029c2_i2c_read_regs(client, RV3029C2_IRQ_FLAGS,
- buf, 1);
- if (ret < 0) {
- dev_err(&client->dev, "can't read alarm flag\n");
- return ret;
- }
- buf[0] &= ~RV3029C2_IRQ_FLAGS_AF;
- ret = rv3029c2_i2c_write_regs(client, RV3029C2_IRQ_FLAGS,
- buf, 1);
+ ret = rv3029_i2c_update_bits(client, RV3029_IRQ_FLAGS,
+ RV3029_IRQ_FLAGS_AF, 0);
if (ret < 0) {
- dev_err(&client->dev, "can't set alarm flag\n");
+ dev_err(&client->dev, "can't clear alarm flag\n");
return ret;
}
/* enable AIE irq */
- ret = rv3029c2_rtc_i2c_alarm_set_irq(client, 1);
+ ret = rv3029_rtc_i2c_alarm_set_irq(client, 1);
if (ret)
return ret;
dev_dbg(&client->dev, "alarm IRQ armed\n");
} else {
/* disable AIE irq */
- ret = rv3029c2_rtc_i2c_alarm_set_irq(client, 0);
+ ret = rv3029_rtc_i2c_alarm_set_irq(client, 0);
if (ret)
return ret;
@@ -320,13 +493,13 @@ static int rv3029c2_rtc_i2c_set_alarm(struct i2c_client *client,
return 0;
}
-static int rv3029c2_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+static int rv3029_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- return rv3029c2_rtc_i2c_set_alarm(to_i2c_client(dev), alarm);
+ return rv3029_rtc_i2c_set_alarm(to_i2c_client(dev), alarm);
}
static int
-rv3029c2_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
+rv3029_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
{
u8 regs[8];
int ret;
@@ -339,26 +512,26 @@ rv3029c2_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
if (tm->tm_year < 100)
return -EINVAL;
- regs[RV3029C2_W_SEC-RV3029C2_W_SEC] = bin2bcd(tm->tm_sec);
- regs[RV3029C2_W_MINUTES-RV3029C2_W_SEC] = bin2bcd(tm->tm_min);
- regs[RV3029C2_W_HOURS-RV3029C2_W_SEC] = bin2bcd(tm->tm_hour);
- regs[RV3029C2_W_DATE-RV3029C2_W_SEC] = bin2bcd(tm->tm_mday);
- regs[RV3029C2_W_MONTHS-RV3029C2_W_SEC] = bin2bcd(tm->tm_mon+1);
- regs[RV3029C2_W_DAYS-RV3029C2_W_SEC] = bin2bcd((tm->tm_wday & 7)+1);
- regs[RV3029C2_W_YEARS-RV3029C2_W_SEC] = bin2bcd(tm->tm_year - 100);
+ regs[RV3029_W_SEC-RV3029_W_SEC] = bin2bcd(tm->tm_sec);
+ regs[RV3029_W_MINUTES-RV3029_W_SEC] = bin2bcd(tm->tm_min);
+ regs[RV3029_W_HOURS-RV3029_W_SEC] = bin2bcd(tm->tm_hour);
+ regs[RV3029_W_DATE-RV3029_W_SEC] = bin2bcd(tm->tm_mday);
+ regs[RV3029_W_MONTHS-RV3029_W_SEC] = bin2bcd(tm->tm_mon+1);
+ regs[RV3029_W_DAYS-RV3029_W_SEC] = bin2bcd((tm->tm_wday & 7)+1);
+ regs[RV3029_W_YEARS-RV3029_W_SEC] = bin2bcd(tm->tm_year - 100);
- ret = rv3029c2_i2c_write_regs(client, RV3029C2_W_SEC, regs,
- RV3029C2_WATCH_SECTION_LEN);
+ ret = rv3029_i2c_write_regs(client, RV3029_W_SEC, regs,
+ RV3029_WATCH_SECTION_LEN);
if (ret < 0)
return ret;
- ret = rv3029c2_i2c_get_sr(client, regs);
+ ret = rv3029_i2c_get_sr(client, regs);
if (ret < 0) {
dev_err(&client->dev, "%s: reading SR failed\n", __func__);
return ret;
}
/* clear PON bit */
- ret = rv3029c2_i2c_set_sr(client, (regs[0] & ~RV3029C2_STATUS_PON));
+ ret = rv3029_i2c_set_sr(client, (regs[0] & ~RV3029_STATUS_PON));
if (ret < 0) {
dev_err(&client->dev, "%s: reading SR failed\n", __func__);
return ret;
@@ -367,26 +540,238 @@ rv3029c2_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
return 0;
}
-static int rv3029c2_rtc_set_time(struct device *dev, struct rtc_time *tm)
+static int rv3029_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
- return rv3029c2_i2c_set_time(to_i2c_client(dev), tm);
+ return rv3029_i2c_set_time(to_i2c_client(dev), tm);
}
-static const struct rtc_class_ops rv3029c2_rtc_ops = {
- .read_time = rv3029c2_rtc_read_time,
- .set_time = rv3029c2_rtc_set_time,
- .read_alarm = rv3029c2_rtc_read_alarm,
- .set_alarm = rv3029c2_rtc_set_alarm,
+static const struct rv3029_trickle_tab_elem {
+ u32 r; /* resistance in ohms */
+ u8 conf; /* trickle config bits */
+} rv3029_trickle_tab[] = {
+ {
+ .r = 1076,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
+ RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
+ }, {
+ .r = 1091,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
+ RV3029_TRICKLE_20K,
+ }, {
+ .r = 1137,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
+ RV3029_TRICKLE_80K,
+ }, {
+ .r = 1154,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K,
+ }, {
+ .r = 1371,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_20K |
+ RV3029_TRICKLE_80K,
+ }, {
+ .r = 1395,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_20K,
+ }, {
+ .r = 1472,
+ .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_80K,
+ }, {
+ .r = 1500,
+ .conf = RV3029_TRICKLE_1K,
+ }, {
+ .r = 3810,
+ .conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_20K |
+ RV3029_TRICKLE_80K,
+ }, {
+ .r = 4000,
+ .conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_20K,
+ }, {
+ .r = 4706,
+ .conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_80K,
+ }, {
+ .r = 5000,
+ .conf = RV3029_TRICKLE_5K,
+ }, {
+ .r = 16000,
+ .conf = RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
+ }, {
+ .r = 20000,
+ .conf = RV3029_TRICKLE_20K,
+ }, {
+ .r = 80000,
+ .conf = RV3029_TRICKLE_80K,
+ },
};
-static struct i2c_device_id rv3029c2_id[] = {
+static void rv3029_trickle_config(struct i2c_client *client)
+{
+ struct device_node *of_node = client->dev.of_node;
+ const struct rv3029_trickle_tab_elem *elem;
+ int i, err;
+ u32 ohms;
+ u8 trickle_set_bits;
+
+ if (!of_node)
+ return;
+
+ /* Configure the trickle charger. */
+ err = of_property_read_u32(of_node, "trickle-resistor-ohms", &ohms);
+ if (err) {
+ /* Disable trickle charger. */
+ trickle_set_bits = 0;
+ } else {
+ /* Enable trickle charger. */
+ for (i = 0; i < ARRAY_SIZE(rv3029_trickle_tab); i++) {
+ elem = &rv3029_trickle_tab[i];
+ if (elem->r >= ohms)
+ break;
+ }
+ trickle_set_bits = elem->conf;
+ dev_info(&client->dev,
+ "Trickle charger enabled at %d ohms resistance.\n",
+ elem->r);
+ }
+ err = rv3029_eeprom_update_bits(client, RV3029_CONTROL_E2P_EECTRL,
+ RV3029_TRICKLE_MASK,
+ trickle_set_bits);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "Failed to update trickle charger config\n");
+ }
+}
+
+#ifdef CONFIG_RTC_DRV_RV3029_HWMON
+
+static int rv3029_read_temp(struct i2c_client *client, int *temp_mC)
+{
+ int ret;
+ u8 temp;
+
+ ret = rv3029_i2c_read_regs(client, RV3029_TEMP_PAGE, &temp, 1);
+ if (ret < 0)
+ return ret;
+
+ *temp_mC = ((int)temp - 60) * 1000;
+
+ return 0;
+}
+
+static ssize_t rv3029_hwmon_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = dev_get_drvdata(dev);
+ int ret, temp_mC;
+
+ ret = rv3029_read_temp(client, &temp_mC);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", temp_mC);
+}
+
+static ssize_t rv3029_hwmon_set_update_interval(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = dev_get_drvdata(dev);
+ unsigned long interval_ms;
+ int ret;
+ u8 th_set_bits = 0;
+
+ ret = kstrtoul(buf, 10, &interval_ms);
+ if (ret < 0)
+ return ret;
+
+ if (interval_ms != 0) {
+ th_set_bits |= RV3029_EECTRL_THE;
+ if (interval_ms >= 16000)
+ th_set_bits |= RV3029_EECTRL_THP;
+ }
+ ret = rv3029_eeprom_update_bits(client, RV3029_CONTROL_E2P_EECTRL,
+ RV3029_EECTRL_THE | RV3029_EECTRL_THP,
+ th_set_bits);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t rv3029_hwmon_show_update_interval(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = dev_get_drvdata(dev);
+ int ret, interval_ms;
+ u8 eectrl;
+
+ ret = rv3029_eeprom_read(client, RV3029_CONTROL_E2P_EECTRL,
+ &eectrl, 1);
+ if (ret < 0)
+ return ret;
+
+ if (eectrl & RV3029_EECTRL_THE) {
+ if (eectrl & RV3029_EECTRL_THP)
+ interval_ms = 16000;
+ else
+ interval_ms = 1000;
+ } else {
+ interval_ms = 0;
+ }
+
+ return sprintf(buf, "%d\n", interval_ms);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, rv3029_hwmon_show_temp,
+ NULL, 0);
+static SENSOR_DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO,
+ rv3029_hwmon_show_update_interval,
+ rv3029_hwmon_set_update_interval, 0);
+
+static struct attribute *rv3029_hwmon_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_update_interval.dev_attr.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(rv3029_hwmon);
+
+static void rv3029_hwmon_register(struct i2c_client *client)
+{
+ struct device *hwmon_dev;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(
+ &client->dev, client->name, client, rv3029_hwmon_groups);
+ if (IS_ERR(hwmon_dev)) {
+ dev_warn(&client->dev,
+ "unable to register hwmon device %ld\n",
+ PTR_ERR(hwmon_dev));
+ }
+}
+
+#else /* CONFIG_RTC_DRV_RV3029_HWMON */
+
+static void rv3029_hwmon_register(struct i2c_client *client)
+{
+}
+
+#endif /* CONFIG_RTC_DRV_RV3029_HWMON */
+
+static const struct rtc_class_ops rv3029_rtc_ops = {
+ .read_time = rv3029_rtc_read_time,
+ .set_time = rv3029_rtc_set_time,
+ .read_alarm = rv3029_rtc_read_alarm,
+ .set_alarm = rv3029_rtc_set_alarm,
+};
+
+static struct i2c_device_id rv3029_id[] = {
+ { "rv3029", 0 },
{ "rv3029c2", 0 },
{ }
};
-MODULE_DEVICE_TABLE(i2c, rv3029c2_id);
+MODULE_DEVICE_TABLE(i2c, rv3029_id);
-static int rv3029c2_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int rv3029_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
struct rtc_device *rtc;
int rc = 0;
@@ -395,14 +780,17 @@ static int rv3029c2_probe(struct i2c_client *client,
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_EMUL))
return -ENODEV;
- rc = rv3029c2_i2c_get_sr(client, buf);
+ rc = rv3029_i2c_get_sr(client, buf);
if (rc < 0) {
dev_err(&client->dev, "reading status failed\n");
return rc;
}
+ rv3029_trickle_config(client);
+ rv3029_hwmon_register(client);
+
rtc = devm_rtc_device_register(&client->dev, client->name,
- &rv3029c2_rtc_ops, THIS_MODULE);
+ &rv3029_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
@@ -412,16 +800,17 @@ static int rv3029c2_probe(struct i2c_client *client,
return 0;
}
-static struct i2c_driver rv3029c2_driver = {
+static struct i2c_driver rv3029_driver = {
.driver = {
.name = "rtc-rv3029c2",
},
- .probe = rv3029c2_probe,
- .id_table = rv3029c2_id,
+ .probe = rv3029_probe,
+ .id_table = rv3029_id,
};
-module_i2c_driver(rv3029c2_driver);
+module_i2c_driver(rv3029_driver);
MODULE_AUTHOR("Gregory Hermant <gregory.hermant@calao-systems.com>");
-MODULE_DESCRIPTION("Micro Crystal RV3029C2 RTC driver");
+MODULE_AUTHOR("Michael Buesch <m@bues.ch>");
+MODULE_DESCRIPTION("Micro Crystal RV3029 RTC driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
index 7155c0816..f623038e5 100644
--- a/drivers/rtc/rtc-rv8803.c
+++ b/drivers/rtc/rtc-rv8803.c
@@ -52,7 +52,7 @@
struct rv8803_data {
struct i2c_client *client;
struct rtc_device *rtc;
- spinlock_t flags_lock;
+ struct mutex flags_lock;
u8 ctrl;
};
@@ -61,13 +61,16 @@ static irqreturn_t rv8803_handle_irq(int irq, void *dev_id)
struct i2c_client *client = dev_id;
struct rv8803_data *rv8803 = i2c_get_clientdata(client);
unsigned long events = 0;
- int flags;
+ int flags, try = 0;
- spin_lock(&rv8803->flags_lock);
+ mutex_lock(&rv8803->flags_lock);
- flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ do {
+ flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ try++;
+ } while ((flags == -ENXIO) && (try < 3));
if (flags <= 0) {
- spin_unlock(&rv8803->flags_lock);
+ mutex_unlock(&rv8803->flags_lock);
return IRQ_NONE;
}
@@ -102,7 +105,7 @@ static irqreturn_t rv8803_handle_irq(int irq, void *dev_id)
rv8803->ctrl);
}
- spin_unlock(&rv8803->flags_lock);
+ mutex_unlock(&rv8803->flags_lock);
return IRQ_HANDLED;
}
@@ -155,7 +158,6 @@ static int rv8803_set_time(struct device *dev, struct rtc_time *tm)
struct rv8803_data *rv8803 = dev_get_drvdata(dev);
u8 date[7];
int flags, ret;
- unsigned long irqflags;
if ((tm->tm_year < 100) || (tm->tm_year > 199))
return -EINVAL;
@@ -173,18 +175,18 @@ static int rv8803_set_time(struct device *dev, struct rtc_time *tm)
if (ret < 0)
return ret;
- spin_lock_irqsave(&rv8803->flags_lock, irqflags);
+ mutex_lock(&rv8803->flags_lock);
flags = i2c_smbus_read_byte_data(rv8803->client, RV8803_FLAG);
if (flags < 0) {
- spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
+ mutex_unlock(&rv8803->flags_lock);
return flags;
}
ret = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG,
flags & ~RV8803_FLAG_V2F);
- spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
+ mutex_unlock(&rv8803->flags_lock);
return ret;
}
@@ -226,7 +228,6 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
u8 alarmvals[3];
u8 ctrl[2];
int ret, err;
- unsigned long irqflags;
/* The alarm has no seconds, round up to nearest minute */
if (alrm->time.tm_sec) {
@@ -236,11 +237,11 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
rtc_time64_to_tm(alarm_time, &alrm->time);
}
- spin_lock_irqsave(&rv8803->flags_lock, irqflags);
+ mutex_lock(&rv8803->flags_lock);
ret = i2c_smbus_read_i2c_block_data(client, RV8803_FLAG, 2, ctrl);
if (ret != 2) {
- spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
+ mutex_unlock(&rv8803->flags_lock);
return ret < 0 ? ret : -EIO;
}
@@ -253,14 +254,14 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
err = i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL,
rv8803->ctrl);
if (err) {
- spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
+ mutex_unlock(&rv8803->flags_lock);
return err;
}
}
ctrl[1] &= ~RV8803_FLAG_AF;
err = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG, ctrl[1]);
- spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
+ mutex_unlock(&rv8803->flags_lock);
if (err)
return err;
@@ -289,7 +290,6 @@ static int rv8803_alarm_irq_enable(struct device *dev, unsigned int enabled)
struct i2c_client *client = to_i2c_client(dev);
struct rv8803_data *rv8803 = dev_get_drvdata(dev);
int ctrl, flags, err;
- unsigned long irqflags;
ctrl = rv8803->ctrl;
@@ -305,15 +305,15 @@ static int rv8803_alarm_irq_enable(struct device *dev, unsigned int enabled)
ctrl &= ~RV8803_CTRL_AIE;
}
- spin_lock_irqsave(&rv8803->flags_lock, irqflags);
+ mutex_lock(&rv8803->flags_lock);
flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
if (flags < 0) {
- spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
+ mutex_unlock(&rv8803->flags_lock);
return flags;
}
flags &= ~(RV8803_FLAG_AF | RV8803_FLAG_UF);
err = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags);
- spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
+ mutex_unlock(&rv8803->flags_lock);
if (err)
return err;
@@ -333,7 +333,6 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
struct i2c_client *client = to_i2c_client(dev);
struct rv8803_data *rv8803 = dev_get_drvdata(dev);
int flags, ret = 0;
- unsigned long irqflags;
switch (cmd) {
case RTC_VL_READ:
@@ -355,16 +354,16 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
return 0;
case RTC_VL_CLR:
- spin_lock_irqsave(&rv8803->flags_lock, irqflags);
+ mutex_lock(&rv8803->flags_lock);
flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
if (flags < 0) {
- spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
+ mutex_unlock(&rv8803->flags_lock);
return flags;
}
flags &= ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F);
ret = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags);
- spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
+ mutex_unlock(&rv8803->flags_lock);
if (ret < 0)
return ret;
@@ -428,7 +427,7 @@ static int rv8803_probe(struct i2c_client *client,
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct rv8803_data *rv8803;
- int err, flags;
+ int err, flags, try = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK)) {
@@ -441,10 +440,20 @@ static int rv8803_probe(struct i2c_client *client,
if (!rv8803)
return -ENOMEM;
+ mutex_init(&rv8803->flags_lock);
rv8803->client = client;
i2c_set_clientdata(client, rv8803);
- flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ /*
+ * There is a 60µs window where the RTC may not reply on the i2c bus in
+ * that case, the transfer is not ACKed. In that case, ensure there are
+ * multiple attempts.
+ */
+ do {
+ flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ try++;
+ } while ((flags == -ENXIO) && (try < 3));
+
if (flags < 0)
return flags;
@@ -479,8 +488,12 @@ static int rv8803_probe(struct i2c_client *client,
return PTR_ERR(rv8803->rtc);
}
- err = i2c_smbus_write_byte_data(rv8803->client, RV8803_EXT,
- RV8803_EXT_WADA);
+ try = 0;
+ do {
+ err = i2c_smbus_write_byte_data(rv8803->client, RV8803_EXT,
+ RV8803_EXT_WADA);
+ try++;
+ } while ((err == -ENXIO) && (try < 3));
if (err)
return err;
diff --git a/drivers/rtc/rtc-rx6110.c b/drivers/rtc/rtc-rx6110.c
new file mode 100644
index 000000000..bbad00b23
--- /dev/null
+++ b/drivers/rtc/rtc-rx6110.c
@@ -0,0 +1,402 @@
+/*
+ * Driver for the Epson RTC module RX-6110 SA
+ *
+ * Copyright(C) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de>
+ * Copyright(C) SEIKO EPSON CORPORATION 2013. All rights reserved.
+ *
+ * This driver software is distributed as is, without any warranty of any kind,
+ * either express or implied as further specified in the GNU Public License.
+ * This software may be used and distributed according to the terms of the GNU
+ * Public License, version 2 as published by the Free Software Foundation.
+ * See the file COPYING in the main directory of this archive for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+
+/* RX-6110 Register definitions */
+#define RX6110_REG_SEC 0x10
+#define RX6110_REG_MIN 0x11
+#define RX6110_REG_HOUR 0x12
+#define RX6110_REG_WDAY 0x13
+#define RX6110_REG_MDAY 0x14
+#define RX6110_REG_MONTH 0x15
+#define RX6110_REG_YEAR 0x16
+#define RX6110_REG_RES1 0x17
+#define RX6110_REG_ALMIN 0x18
+#define RX6110_REG_ALHOUR 0x19
+#define RX6110_REG_ALWDAY 0x1A
+#define RX6110_REG_TCOUNT0 0x1B
+#define RX6110_REG_TCOUNT1 0x1C
+#define RX6110_REG_EXT 0x1D
+#define RX6110_REG_FLAG 0x1E
+#define RX6110_REG_CTRL 0x1F
+#define RX6110_REG_USER0 0x20
+#define RX6110_REG_USER1 0x21
+#define RX6110_REG_USER2 0x22
+#define RX6110_REG_USER3 0x23
+#define RX6110_REG_USER4 0x24
+#define RX6110_REG_USER5 0x25
+#define RX6110_REG_USER6 0x26
+#define RX6110_REG_USER7 0x27
+#define RX6110_REG_USER8 0x28
+#define RX6110_REG_USER9 0x29
+#define RX6110_REG_USERA 0x2A
+#define RX6110_REG_USERB 0x2B
+#define RX6110_REG_USERC 0x2C
+#define RX6110_REG_USERD 0x2D
+#define RX6110_REG_USERE 0x2E
+#define RX6110_REG_USERF 0x2F
+#define RX6110_REG_RES2 0x30
+#define RX6110_REG_RES3 0x31
+#define RX6110_REG_IRQ 0x32
+
+#define RX6110_BIT_ALARM_EN BIT(7)
+
+/* Extension Register (1Dh) bit positions */
+#define RX6110_BIT_EXT_TSEL0 BIT(0)
+#define RX6110_BIT_EXT_TSEL1 BIT(1)
+#define RX6110_BIT_EXT_TSEL2 BIT(2)
+#define RX6110_BIT_EXT_WADA BIT(3)
+#define RX6110_BIT_EXT_TE BIT(4)
+#define RX6110_BIT_EXT_USEL BIT(5)
+#define RX6110_BIT_EXT_FSEL0 BIT(6)
+#define RX6110_BIT_EXT_FSEL1 BIT(7)
+
+/* Flag Register (1Eh) bit positions */
+#define RX6110_BIT_FLAG_VLF BIT(1)
+#define RX6110_BIT_FLAG_AF BIT(3)
+#define RX6110_BIT_FLAG_TF BIT(4)
+#define RX6110_BIT_FLAG_UF BIT(5)
+
+/* Control Register (1Fh) bit positions */
+#define RX6110_BIT_CTRL_TBKE BIT(0)
+#define RX6110_BIT_CTRL_TBKON BIT(1)
+#define RX6110_BIT_CTRL_TSTP BIT(2)
+#define RX6110_BIT_CTRL_AIE BIT(3)
+#define RX6110_BIT_CTRL_TIE BIT(4)
+#define RX6110_BIT_CTRL_UIE BIT(5)
+#define RX6110_BIT_CTRL_STOP BIT(6)
+#define RX6110_BIT_CTRL_TEST BIT(7)
+
+enum {
+ RTC_SEC = 0,
+ RTC_MIN,
+ RTC_HOUR,
+ RTC_WDAY,
+ RTC_MDAY,
+ RTC_MONTH,
+ RTC_YEAR,
+ RTC_NR_TIME
+};
+
+#define RX6110_DRIVER_NAME "rx6110"
+
+struct rx6110_data {
+ struct rtc_device *rtc;
+ struct regmap *regmap;
+};
+
+/**
+ * rx6110_rtc_tm_to_data - convert rtc_time to native time encoding
+ *
+ * @tm: holds date and time
+ * @data: holds the encoding in rx6110 native form
+ */
+static int rx6110_rtc_tm_to_data(struct rtc_time *tm, u8 *data)
+{
+ pr_debug("%s: date %ds %dm %dh %dmd %dm %dy\n", __func__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year);
+
+ /*
+ * The year in the RTC is a value between 0 and 99.
+ * Assume that this represents the current century
+ * and disregard all other values.
+ */
+ if (tm->tm_year < 100 || tm->tm_year >= 200)
+ return -EINVAL;
+
+ data[RTC_SEC] = bin2bcd(tm->tm_sec);
+ data[RTC_MIN] = bin2bcd(tm->tm_min);
+ data[RTC_HOUR] = bin2bcd(tm->tm_hour);
+ data[RTC_WDAY] = BIT(bin2bcd(tm->tm_wday));
+ data[RTC_MDAY] = bin2bcd(tm->tm_mday);
+ data[RTC_MONTH] = bin2bcd(tm->tm_mon + 1);
+ data[RTC_YEAR] = bin2bcd(tm->tm_year % 100);
+
+ return 0;
+}
+
+/**
+ * rx6110_data_to_rtc_tm - convert native time encoding to rtc_time
+ *
+ * @data: holds the encoding in rx6110 native form
+ * @tm: holds date and time
+ */
+static int rx6110_data_to_rtc_tm(u8 *data, struct rtc_time *tm)
+{
+ tm->tm_sec = bcd2bin(data[RTC_SEC] & 0x7f);
+ tm->tm_min = bcd2bin(data[RTC_MIN] & 0x7f);
+ /* only 24-hour clock */
+ tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x3f);
+ tm->tm_wday = ffs(data[RTC_WDAY] & 0x7f);
+ tm->tm_mday = bcd2bin(data[RTC_MDAY] & 0x3f);
+ tm->tm_mon = bcd2bin(data[RTC_MONTH] & 0x1f) - 1;
+ tm->tm_year = bcd2bin(data[RTC_YEAR]) + 100;
+
+ pr_debug("%s: date %ds %dm %dh %dmd %dm %dy\n", __func__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year);
+
+ /*
+ * The year in the RTC is a value between 0 and 99.
+ * Assume that this represents the current century
+ * and disregard all other values.
+ */
+ if (tm->tm_year < 100 || tm->tm_year >= 200)
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * rx6110_set_time - set the current time in the rx6110 registers
+ *
+ * @dev: the rtc device in use
+ * @tm: holds date and time
+ *
+ * BUG: The HW assumes every year that is a multiple of 4 to be a leap
+ * year. Next time this is wrong is 2100, which will not be a leap year
+ *
+ * Note: If STOP is not set/cleared, the clock will start when the seconds
+ * register is written
+ *
+ */
+static int rx6110_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rx6110_data *rx6110 = dev_get_drvdata(dev);
+ u8 data[RTC_NR_TIME];
+ int ret;
+
+ ret = rx6110_rtc_tm_to_data(tm, data);
+ if (ret < 0)
+ return ret;
+
+ /* set STOP bit before changing clock/calendar */
+ ret = regmap_update_bits(rx6110->regmap, RX6110_REG_CTRL,
+ RX6110_BIT_CTRL_STOP, RX6110_BIT_CTRL_STOP);
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_write(rx6110->regmap, RX6110_REG_SEC, data,
+ RTC_NR_TIME);
+ if (ret)
+ return ret;
+
+ /* The time in the RTC is valid. Be sure to have VLF cleared. */
+ ret = regmap_update_bits(rx6110->regmap, RX6110_REG_FLAG,
+ RX6110_BIT_FLAG_VLF, 0);
+ if (ret)
+ return ret;
+
+ /* clear STOP bit after changing clock/calendar */
+ ret = regmap_update_bits(rx6110->regmap, RX6110_REG_CTRL,
+ RX6110_BIT_CTRL_STOP, 0);
+
+ return ret;
+}
+
+/**
+ * rx6110_get_time - get the current time from the rx6110 registers
+ * @dev: the rtc device in use
+ * @tm: holds date and time
+ */
+static int rx6110_get_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rx6110_data *rx6110 = dev_get_drvdata(dev);
+ u8 data[RTC_NR_TIME];
+ int flags;
+ int ret;
+
+ ret = regmap_read(rx6110->regmap, RX6110_REG_FLAG, &flags);
+ if (ret)
+ return -EINVAL;
+
+ /* check for VLF Flag (set at power-on) */
+ if ((flags & RX6110_BIT_FLAG_VLF)) {
+ dev_warn(dev, "Voltage low, data is invalid.\n");
+ return -EINVAL;
+ }
+
+ /* read registers to date */
+ ret = regmap_bulk_read(rx6110->regmap, RX6110_REG_SEC, data,
+ RTC_NR_TIME);
+ if (ret)
+ return ret;
+
+ ret = rx6110_data_to_rtc_tm(data, tm);
+ if (ret)
+ return ret;
+
+ dev_dbg(dev, "%s: date %ds %dm %dh %dmd %dm %dy\n", __func__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year);
+
+ return rtc_valid_tm(tm);
+}
+
+static const struct reg_sequence rx6110_default_regs[] = {
+ { RX6110_REG_RES1, 0xB8 },
+ { RX6110_REG_RES2, 0x00 },
+ { RX6110_REG_RES3, 0x10 },
+ { RX6110_REG_IRQ, 0x00 },
+ { RX6110_REG_ALMIN, 0x00 },
+ { RX6110_REG_ALHOUR, 0x00 },
+ { RX6110_REG_ALWDAY, 0x00 },
+};
+
+/**
+ * rx6110_init - initialize the rx6110 registers
+ *
+ * @rx6110: pointer to the rx6110 struct in use
+ *
+ */
+static int rx6110_init(struct rx6110_data *rx6110)
+{
+ struct rtc_device *rtc = rx6110->rtc;
+ int flags;
+ int ret;
+
+ ret = regmap_update_bits(rx6110->regmap, RX6110_REG_EXT,
+ RX6110_BIT_EXT_TE, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_register_patch(rx6110->regmap, rx6110_default_regs,
+ ARRAY_SIZE(rx6110_default_regs));
+ if (ret)
+ return ret;
+
+ ret = regmap_read(rx6110->regmap, RX6110_REG_FLAG, &flags);
+ if (ret)
+ return ret;
+
+ /* check for VLF Flag (set at power-on) */
+ if ((flags & RX6110_BIT_FLAG_VLF))
+ dev_warn(&rtc->dev, "Voltage low, data loss detected.\n");
+
+ /* check for Alarm Flag */
+ if (flags & RX6110_BIT_FLAG_AF)
+ dev_warn(&rtc->dev, "An alarm may have been missed.\n");
+
+ /* check for Periodic Timer Flag */
+ if (flags & RX6110_BIT_FLAG_TF)
+ dev_warn(&rtc->dev, "Periodic timer was detected\n");
+
+ /* check for Update Timer Flag */
+ if (flags & RX6110_BIT_FLAG_UF)
+ dev_warn(&rtc->dev, "Update timer was detected\n");
+
+ /* clear all flags BUT VLF */
+ ret = regmap_update_bits(rx6110->regmap, RX6110_REG_FLAG,
+ RX6110_BIT_FLAG_AF |
+ RX6110_BIT_FLAG_UF |
+ RX6110_BIT_FLAG_TF,
+ 0);
+
+ return ret;
+}
+
+static struct rtc_class_ops rx6110_rtc_ops = {
+ .read_time = rx6110_get_time,
+ .set_time = rx6110_set_time,
+};
+
+static struct regmap_config regmap_spi_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RX6110_REG_IRQ,
+ .read_flag_mask = 0x80,
+};
+
+/**
+ * rx6110_probe - initialize rtc driver
+ * @spi: pointer to spi device
+ */
+static int rx6110_probe(struct spi_device *spi)
+{
+ struct rx6110_data *rx6110;
+ int err;
+
+ if ((spi->bits_per_word && spi->bits_per_word != 8) ||
+ (spi->max_speed_hz > 2000000) ||
+ (spi->mode != (SPI_CS_HIGH | SPI_CPOL | SPI_CPHA))) {
+ dev_warn(&spi->dev, "SPI settings: bits_per_word: %d, max_speed_hz: %d, mode: %xh\n",
+ spi->bits_per_word, spi->max_speed_hz, spi->mode);
+ dev_warn(&spi->dev, "driving device in an unsupported mode");
+ }
+
+ rx6110 = devm_kzalloc(&spi->dev, sizeof(*rx6110), GFP_KERNEL);
+ if (!rx6110)
+ return -ENOMEM;
+
+ rx6110->regmap = devm_regmap_init_spi(spi, &regmap_spi_config);
+ if (IS_ERR(rx6110->regmap)) {
+ dev_err(&spi->dev, "regmap init failed for rtc rx6110\n");
+ return PTR_ERR(rx6110->regmap);
+ }
+
+ spi_set_drvdata(spi, rx6110);
+
+ rx6110->rtc = devm_rtc_device_register(&spi->dev,
+ RX6110_DRIVER_NAME,
+ &rx6110_rtc_ops, THIS_MODULE);
+
+ if (IS_ERR(rx6110->rtc))
+ return PTR_ERR(rx6110->rtc);
+
+ err = rx6110_init(rx6110);
+ if (err)
+ return err;
+
+ rx6110->rtc->max_user_freq = 1;
+
+ return 0;
+}
+
+static int rx6110_remove(struct spi_device *spi)
+{
+ return 0;
+}
+
+static const struct spi_device_id rx6110_id[] = {
+ { "rx6110", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, rx6110_id);
+
+static struct spi_driver rx6110_driver = {
+ .driver = {
+ .name = RX6110_DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = rx6110_probe,
+ .remove = rx6110_remove,
+ .id_table = rx6110_id,
+};
+
+module_spi_driver(rx6110_driver);
+
+MODULE_AUTHOR("Val Krutov <val.krutov@erd.epson.com>");
+MODULE_DESCRIPTION("RX-6110 SA RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index 17341fead..9f105efbc 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -7,7 +7,7 @@
* All rights reserved.
*
* Modified by fengjh at rising.com.cn
- * <http://lists.lm-sensors.org/mailman/listinfo/lm-sensors>
+ * <lm-sensors@lm-sensors.org>
* 2006.11
*
* Code cleanup by Sergei Poselenov, <sposelenov@emcraft.com>
@@ -146,8 +146,10 @@ static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
{
struct i2c_client *client = dev_id;
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
+ struct mutex *lock = &rx8025->rtc->ops_lock;
int status;
+ mutex_lock(lock);
status = rx8025_read_reg(client, RX8025_REG_CTRL2);
if (status < 0)
goto out;
@@ -172,6 +174,8 @@ static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
}
out:
+ mutex_unlock(lock);
+
return IRQ_HANDLED;
}
@@ -340,7 +344,17 @@ static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t)
if (client->irq <= 0)
return -EINVAL;
- /* Hardware alarm precision is 1 minute! */
+ /*
+ * Hardware alarm precision is 1 minute!
+ * round up to nearest minute
+ */
+ if (t->time.tm_sec) {
+ time64_t alarm_time = rtc_tm_to_time64(&t->time);
+
+ alarm_time += 60 - t->time.tm_sec;
+ rtc_time64_to_tm(alarm_time, &t->time);
+ }
+
ald[0] = bin2bcd(t->time.tm_min);
if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
ald[1] = bin2bcd(t->time.tm_hour);
@@ -538,8 +552,9 @@ static int rx8025_probe(struct i2c_client *client,
if (client->irq > 0) {
dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
- rx8025_handle_irq, 0, "rx8025",
- client);
+ rx8025_handle_irq,
+ IRQF_ONESHOT,
+ "rx8025", client);
if (err) {
dev_err(&client->dev, "unable to request IRQ, alarms disabled\n");
client->irq = 0;
@@ -548,6 +563,9 @@ static int rx8025_probe(struct i2c_client *client,
rx8025->rtc->max_user_freq = 1;
+ /* the rx8025 alarm only supports a minute accuracy */
+ rx8025->rtc->uie_unsupported = 1;
+
err = rx8025_sysfs_register(&client->dev);
return err;
}
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index ffb860d18..d01ad7e80 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -501,18 +501,27 @@ static int s3c_rtc_probe(struct platform_device *pdev)
info->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
if (IS_ERR(info->rtc_clk)) {
- dev_err(&pdev->dev, "failed to find rtc clock\n");
- return PTR_ERR(info->rtc_clk);
+ ret = PTR_ERR(info->rtc_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to find rtc clock\n");
+ else
+ dev_dbg(&pdev->dev, "probe deferred due to missing rtc clk\n");
+ return ret;
}
clk_prepare_enable(info->rtc_clk);
if (info->data->needs_src_clk) {
info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
if (IS_ERR(info->rtc_src_clk)) {
- dev_err(&pdev->dev,
- "failed to find rtc source clock\n");
+ ret = PTR_ERR(info->rtc_src_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to find rtc source clock\n");
+ else
+ dev_dbg(&pdev->dev,
+ "probe deferred due to missing rtc src clk\n");
clk_disable_unprepare(info->rtc_clk);
- return PTR_ERR(info->rtc_src_clk);
+ return ret;
}
clk_prepare_enable(info->rtc_src_clk);
}
diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index 7407d7394..0477678d9 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -216,7 +216,7 @@ static int s5m8767_tm_to_data(struct rtc_time *tm, u8 *data)
* Read RTC_UDR_CON register and wait till UDR field is cleared.
* This indicates that time/alarm update ended.
*/
-static inline int s5m8767_wait_for_udr_update(struct s5m_rtc_info *info)
+static int s5m8767_wait_for_udr_update(struct s5m_rtc_info *info)
{
int ret, retry = UDR_READ_RETRY_CNT;
unsigned int data;
@@ -231,7 +231,7 @@ static inline int s5m8767_wait_for_udr_update(struct s5m_rtc_info *info)
return ret;
}
-static inline int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
+static int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
struct rtc_wkalrm *alarm)
{
int ret;
@@ -264,7 +264,7 @@ static inline int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
return 0;
}
-static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
+static int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
{
int ret;
unsigned int data;
@@ -288,7 +288,7 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
return ret;
}
-static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
+static int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
{
int ret;
unsigned int data;
diff --git a/drivers/rtc/rtc-sysfs.c b/drivers/rtc/rtc-sysfs.c
index 463e28606..63b9fb131 100644
--- a/drivers/rtc/rtc-sysfs.c
+++ b/drivers/rtc/rtc-sysfs.c
@@ -218,6 +218,34 @@ wakealarm_store(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR_RW(wakealarm);
+static ssize_t
+offset_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ ssize_t retval;
+ long offset;
+
+ retval = rtc_read_offset(to_rtc_device(dev), &offset);
+ if (retval == 0)
+ retval = sprintf(buf, "%ld\n", offset);
+
+ return retval;
+}
+
+static ssize_t
+offset_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ ssize_t retval;
+ long offset;
+
+ retval = kstrtol(buf, 10, &offset);
+ if (retval == 0)
+ retval = rtc_set_offset(to_rtc_device(dev), offset);
+
+ return (retval < 0) ? retval : n;
+}
+static DEVICE_ATTR_RW(offset);
+
static struct attribute *rtc_attrs[] = {
&dev_attr_name.attr,
&dev_attr_date.attr,
@@ -226,6 +254,7 @@ static struct attribute *rtc_attrs[] = {
&dev_attr_max_user_freq.attr,
&dev_attr_hctosys.attr,
&dev_attr_wakealarm.attr,
+ &dev_attr_offset.attr,
NULL,
};
@@ -249,9 +278,13 @@ static umode_t rtc_attr_is_visible(struct kobject *kobj,
struct rtc_device *rtc = to_rtc_device(dev);
umode_t mode = attr->mode;
- if (attr == &dev_attr_wakealarm.attr)
+ if (attr == &dev_attr_wakealarm.attr) {
if (!rtc_does_wakealarm(rtc))
mode = 0;
+ } else if (attr == &dev_attr_offset.attr) {
+ if (!rtc->ops->set_offset)
+ mode = 0;
+ }
return mode;
}
diff --git a/drivers/rtc/rtc-tps6586x.c b/drivers/rtc/rtc-tps6586x.c
index 3b6ce80a7..e404faac6 100644
--- a/drivers/rtc/rtc-tps6586x.c
+++ b/drivers/rtc/rtc-tps6586x.c
@@ -286,7 +286,7 @@ static int tps6586x_rtc_probe(struct platform_device *pdev)
ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
tps6586x_rtc_irq,
- IRQF_ONESHOT | IRQF_EARLY_RESUME,
+ IRQF_ONESHOT,
dev_name(&pdev->dev), rtc);
if (ret < 0) {
dev_err(&pdev->dev, "request IRQ(%d) failed with ret %d\n",
diff --git a/drivers/rtc/rtc-tps65910.c b/drivers/rtc/rtc-tps65910.c
index f42aa2b2d..5a3d53caa 100644
--- a/drivers/rtc/rtc-tps65910.c
+++ b/drivers/rtc/rtc-tps65910.c
@@ -268,7 +268,7 @@ static int tps65910_rtc_probe(struct platform_device *pdev)
}
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
- tps65910_rtc_interrupt, IRQF_TRIGGER_LOW | IRQF_EARLY_RESUME,
+ tps65910_rtc_interrupt, IRQF_TRIGGER_LOW,
dev_name(&pdev->dev), &pdev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ is not free.\n");
diff --git a/drivers/rtc/rtc-tps80031.c b/drivers/rtc/rtc-tps80031.c
index 27e254cde..737f26eb2 100644
--- a/drivers/rtc/rtc-tps80031.c
+++ b/drivers/rtc/rtc-tps80031.c
@@ -287,7 +287,7 @@ static int tps80031_rtc_probe(struct platform_device *pdev)
ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
tps80031_rtc_irq,
- IRQF_ONESHOT | IRQF_EARLY_RESUME,
+ IRQF_ONESHOT,
dev_name(&pdev->dev), rtc);
if (ret < 0) {
dev_err(&pdev->dev, "request IRQ:%d failed, err = %d\n",