summaryrefslogtreecommitdiff
path: root/drivers/rtc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc')
-rw-r--r--drivers/rtc/Kconfig26
-rw-r--r--drivers/rtc/Makefile2
-rw-r--r--drivers/rtc/interface.c32
-rw-r--r--drivers/rtc/rtc-abx80x.c12
-rw-r--r--drivers/rtc/rtc-asm9260.c1
-rw-r--r--drivers/rtc/rtc-at91sam9.c1
-rw-r--r--drivers/rtc/rtc-cmos.c17
-rw-r--r--drivers/rtc/rtc-da9052.c1
-rw-r--r--drivers/rtc/rtc-da9055.c1
-rw-r--r--drivers/rtc/rtc-davinci.c2
-rw-r--r--drivers/rtc/rtc-ds1286.c2
-rw-r--r--drivers/rtc/rtc-ds1305.c7
-rw-r--r--drivers/rtc/rtc-ds1307.c5
-rw-r--r--drivers/rtc/rtc-ds1343.c6
-rw-r--r--drivers/rtc/rtc-ds1685.c53
-rw-r--r--drivers/rtc/rtc-ds2404.c2
-rw-r--r--drivers/rtc/rtc-ds3232.c6
-rw-r--r--drivers/rtc/rtc-efi.c6
-rw-r--r--drivers/rtc/rtc-generic.c36
-rw-r--r--drivers/rtc/rtc-hym8563.c5
-rw-r--r--drivers/rtc/rtc-isl12057.c33
-rw-r--r--drivers/rtc/rtc-m41t80.c34
-rw-r--r--drivers/rtc/rtc-m48t86.c2
-rw-r--r--drivers/rtc/rtc-max6916.c164
-rw-r--r--drivers/rtc/rtc-mc146818-lib.c198
-rw-r--r--drivers/rtc/rtc-mrst.c10
-rw-r--r--drivers/rtc/rtc-opal.c4
-rw-r--r--drivers/rtc/rtc-pcf2123.c4
-rw-r--r--drivers/rtc/rtc-pcf85063.c59
-rw-r--r--drivers/rtc/rtc-pcf8563.c5
-rw-r--r--drivers/rtc/rtc-rc5t583.c1
-rw-r--r--drivers/rtc/rtc-rs5c372.c6
-rw-r--r--drivers/rtc/rtc-rv8803.c205
-rw-r--r--drivers/rtc/rtc-rx8010.c8
-rw-r--r--drivers/rtc/rtc-rx8025.c5
-rw-r--r--drivers/rtc/rtc-s35390a.c157
-rw-r--r--drivers/rtc/rtc-s3c.c14
-rw-r--r--drivers/rtc/rtc-sh.c42
-rw-r--r--drivers/rtc/rtc-tegra.c6
-rw-r--r--drivers/rtc/rtc-v3020.c2
40 files changed, 808 insertions, 374 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 18639e0cb..e215f5079 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -5,6 +5,10 @@
config RTC_LIB
bool
+config RTC_MC146818_LIB
+ bool
+ select RTC_LIB
+
menuconfig RTC_CLASS
bool "Real Time Clock"
default n
@@ -574,10 +578,10 @@ config RTC_DRV_EM3027
will be called rtc-em3027.
config RTC_DRV_RV8803
- tristate "Micro Crystal RV8803"
+ tristate "Micro Crystal RV8803, Epson RX8900"
help
- If you say yes here you get support for the Micro Crystal
- RV8803 RTC chips.
+ If you say yes here you get support for the Micro Crystal RV8803 and
+ Epson RX8900 RTC chips.
This driver can also be built as a module. If so, the module
will be called rtc-rv8803.
@@ -670,6 +674,18 @@ config RTC_DRV_DS1390
This driver can also be built as a module. If so, the module
will be called rtc-ds1390.
+config RTC_DRV_MAX6916
+ tristate "Maxim MAX6916"
+ help
+ If you say yes here you will get support for the
+ Maxim MAX6916 SPI RTC chip.
+
+ This driver only supports the RTC feature, and not other chip
+ features such as alarms.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max6916.
+
config RTC_DRV_R9701
tristate "Epson RTC-9701JE"
help
@@ -795,8 +811,9 @@ comment "Platform RTC drivers"
config RTC_DRV_CMOS
tristate "PC-style 'CMOS'"
- depends on X86 || ARM || M32R || PPC || MIPS || SPARC64
+ depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 || MN10300
default y if X86
+ select RTC_MC146818_LIB
help
Say "yes" here to get direct support for the real time clock
found in every PC or ACPI-based system, and some other boards.
@@ -815,6 +832,7 @@ config RTC_DRV_CMOS
config RTC_DRV_ALPHA
bool "Alpha PC-style CMOS"
depends on ALPHA
+ select RTC_MC146818_LIB
default y
help
Direct support for the real-time clock found on every Alpha
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index ea2833723..7cf7ad559 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_RTC_LIB) += rtc-lib.o
obj-$(CONFIG_RTC_HCTOSYS) += hctosys.o
obj-$(CONFIG_RTC_SYSTOHC) += systohc.o
obj-$(CONFIG_RTC_CLASS) += rtc-core.o
+obj-$(CONFIG_RTC_MC146818_LIB) += rtc-mc146818-lib.o
rtc-core-y := class.o interface.o
ifdef CONFIG_RTC_DRV_EFI
@@ -85,6 +86,7 @@ obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
+obj-$(CONFIG_RTC_DRV_MAX6916) += rtc-max6916.o
obj-$(CONFIG_RTC_DRV_MAX77686) += rtc-max77686.o
obj-$(CONFIG_RTC_DRV_MAX8907) += rtc-max8907.o
obj-$(CONFIG_RTC_DRV_MAX8925) += rtc-max8925.o
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 9ef5f6f89..84a52db9b 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -104,7 +104,17 @@ static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *al
else if (!rtc->ops->read_alarm)
err = -EINVAL;
else {
- memset(alarm, 0, sizeof(struct rtc_wkalrm));
+ alarm->enabled = 0;
+ alarm->pending = 0;
+ alarm->time.tm_sec = -1;
+ alarm->time.tm_min = -1;
+ alarm->time.tm_hour = -1;
+ alarm->time.tm_mday = -1;
+ alarm->time.tm_mon = -1;
+ alarm->time.tm_year = -1;
+ alarm->time.tm_wday = -1;
+ alarm->time.tm_yday = -1;
+ alarm->time.tm_isdst = -1;
err = rtc->ops->read_alarm(rtc->dev.parent, alarm);
}
@@ -383,7 +393,7 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
rtc->aie_timer.node.expires = rtc_tm_to_ktime(alarm->time);
rtc->aie_timer.period = ktime_set(0, 0);
- /* Alarm has to be enabled & in the futrure for us to enqueue it */
+ /* Alarm has to be enabled & in the future for us to enqueue it */
if (alarm->enabled && (rtc_tm_to_ktime(now).tv64 <
rtc->aie_timer.node.expires.tv64)) {
@@ -395,8 +405,6 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
}
EXPORT_SYMBOL_GPL(rtc_initialize_alarm);
-
-
int rtc_alarm_irq_enable(struct rtc_device *rtc, unsigned int enabled)
{
int err = mutex_lock_interruptible(&rtc->ops_lock);
@@ -748,9 +756,23 @@ EXPORT_SYMBOL_GPL(rtc_irq_set_freq);
*/
static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer)
{
+ struct timerqueue_node *next = timerqueue_getnext(&rtc->timerqueue);
+ struct rtc_time tm;
+ ktime_t now;
+
timer->enabled = 1;
+ __rtc_read_time(rtc, &tm);
+ now = rtc_tm_to_ktime(tm);
+
+ /* Skip over expired timers */
+ while (next) {
+ if (next->expires.tv64 >= now.tv64)
+ break;
+ next = timerqueue_iterate_next(next);
+ }
+
timerqueue_add(&rtc->timerqueue, &timer->node);
- if (&timer->node == timerqueue_getnext(&rtc->timerqueue)) {
+ if (!next) {
struct rtc_wkalrm alarm;
int err;
alarm.time = rtc_ktime_to_tm(timer->node.expires);
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index ba0d61934..fea9a60b0 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -643,17 +643,15 @@ static int abx80x_probe(struct i2c_client *client,
return err;
}
- err = devm_add_action(&client->dev, rtc_calib_remove_sysfs_group,
- &client->dev);
- if (err) {
- rtc_calib_remove_sysfs_group(&client->dev);
+ err = devm_add_action_or_reset(&client->dev,
+ rtc_calib_remove_sysfs_group,
+ &client->dev);
+ if (err)
dev_err(&client->dev,
"Failed to add sysfs cleanup action: %d\n",
err);
- return err;
- }
- return 0;
+ return err;
}
static int abx80x_remove(struct i2c_client *client)
diff --git a/drivers/rtc/rtc-asm9260.c b/drivers/rtc/rtc-asm9260.c
index 355fdb97a..5219916ce 100644
--- a/drivers/rtc/rtc-asm9260.c
+++ b/drivers/rtc/rtc-asm9260.c
@@ -343,7 +343,6 @@ static struct platform_driver asm9260_rtc_driver = {
.remove = asm9260_rtc_remove,
.driver = {
.name = "asm9260-rtc",
- .owner = THIS_MODULE,
.of_match_table = asm9260_dt_ids,
},
};
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 99732e6f8..7418a763c 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -375,6 +375,7 @@ static int at91_rtc_probe(struct platform_device *pdev)
if (!rtc)
return -ENOMEM;
+ spin_lock_init(&rtc->lock);
rtc->irq = irq;
/* platform setup code should have handled this; sigh */
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index fbe9c7243..43745cac0 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -43,7 +43,7 @@
#include <linux/of_platform.h>
/* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
-#include <asm-generic/rtc.h>
+#include <linux/mc146818rtc.h>
struct cmos_rtc {
struct rtc_device *rtc;
@@ -190,10 +190,10 @@ static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
static int cmos_read_time(struct device *dev, struct rtc_time *t)
{
/* REVISIT: if the clock has a "century" register, use
- * that instead of the heuristic in get_rtc_time().
+ * that instead of the heuristic in mc146818_get_time().
* That'll make Y3K compatility (year > 2070) easy!
*/
- get_rtc_time(t);
+ mc146818_get_time(t);
return 0;
}
@@ -205,7 +205,7 @@ static int cmos_set_time(struct device *dev, struct rtc_time *t)
* takes effect exactly 500ms after we write the register.
* (Also queueing and other delays before we get this far.)
*/
- return set_rtc_time(t);
+ return mc146818_set_time(t);
}
static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
@@ -220,8 +220,6 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
* Some also support day and month, for alarms up to a year in
* the future.
*/
- t->time.tm_mday = -1;
- t->time.tm_mon = -1;
spin_lock_irq(&rtc_lock);
t->time.tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
@@ -272,7 +270,6 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
}
}
}
- t->time.tm_year = -1;
t->enabled = !!(rtc_control & RTC_AIE);
t->pending = 0;
@@ -630,7 +627,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
address_space = 64;
#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \
|| defined(__sparc__) || defined(__mips__) \
- || defined(__powerpc__)
+ || defined(__powerpc__) || defined(CONFIG_MN10300)
address_space = 128;
#else
#warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes.
@@ -1142,14 +1139,14 @@ static __init void cmos_of_init(struct platform_device *pdev)
if (val)
CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
- get_rtc_time(&time);
+ cmos_read_time(&pdev->dev, &time);
ret = rtc_valid_tm(&time);
if (ret) {
struct rtc_time def_time = {
.tm_year = 1,
.tm_mday = 1,
};
- set_rtc_time(&def_time);
+ cmos_set_time(&pdev->dev, &def_time);
}
}
#else
diff --git a/drivers/rtc/rtc-da9052.c b/drivers/rtc/rtc-da9052.c
index a20bcf0e3..427337756 100644
--- a/drivers/rtc/rtc-da9052.c
+++ b/drivers/rtc/rtc-da9052.c
@@ -85,6 +85,7 @@ static int da9052_read_alarm(struct da9052_rtc *rtc, struct rtc_time *rtc_tm)
rtc_tm->tm_mday = v[0][2] & DA9052_RTC_DAY;
rtc_tm->tm_hour = v[0][1] & DA9052_RTC_HOUR;
rtc_tm->tm_min = v[0][0] & DA9052_RTC_MIN;
+ rtc_tm->tm_sec = 0;
ret = rtc_valid_tm(rtc_tm);
return ret;
diff --git a/drivers/rtc/rtc-da9055.c b/drivers/rtc/rtc-da9055.c
index 7ec0872d5..678af8648 100644
--- a/drivers/rtc/rtc-da9055.c
+++ b/drivers/rtc/rtc-da9055.c
@@ -74,6 +74,7 @@ static int da9055_read_alarm(struct da9055 *da9055, struct rtc_time *rtc_tm)
rtc_tm->tm_mday = v[2] & DA9055_RTC_ALM_DAY;
rtc_tm->tm_hour = v[1] & DA9055_RTC_ALM_HOUR;
rtc_tm->tm_min = v[0] & DA9055_RTC_ALM_MIN;
+ rtc_tm->tm_sec = 0;
return rtc_valid_tm(rtc_tm);
}
diff --git a/drivers/rtc/rtc-davinci.c b/drivers/rtc/rtc-davinci.c
index c5432bf64..dba60c1df 100644
--- a/drivers/rtc/rtc-davinci.c
+++ b/drivers/rtc/rtc-davinci.c
@@ -388,6 +388,8 @@ static int davinci_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
u8 day0, day1;
unsigned long flags;
+ alm->time.tm_sec = 0;
+
spin_lock_irqsave(&davinci_rtc_lock, flags);
davinci_rtcss_calendar_wait(davinci_rtc);
diff --git a/drivers/rtc/rtc-ds1286.c b/drivers/rtc/rtc-ds1286.c
index 756e509f6..ef75c349d 100644
--- a/drivers/rtc/rtc-ds1286.c
+++ b/drivers/rtc/rtc-ds1286.c
@@ -16,7 +16,7 @@
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/bcd.h>
-#include <linux/ds1286.h>
+#include <linux/rtc/ds1286.h>
#include <linux/io.h>
#include <linux/slab.h>
diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
index 8e41c4613..72b22935e 100644
--- a/drivers/rtc/rtc-ds1305.c
+++ b/drivers/rtc/rtc-ds1305.c
@@ -313,13 +313,6 @@ static int ds1305_get_alarm(struct device *dev, struct rtc_wkalrm *alm)
alm->time.tm_sec = bcd2bin(buf[DS1305_SEC]);
alm->time.tm_min = bcd2bin(buf[DS1305_MIN]);
alm->time.tm_hour = bcd2hour(buf[DS1305_HOUR]);
- alm->time.tm_mday = -1;
- alm->time.tm_mon = -1;
- alm->time.tm_year = -1;
- /* next three fields are unused by Linux */
- alm->time.tm_wday = -1;
- alm->time.tm_mday = -1;
- alm->time.tm_isdst = -1;
return 0;
}
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index f25f7dce6..8e1c5cb6e 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -482,11 +482,6 @@ static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f);
t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f);
t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f);
- t->time.tm_mon = -1;
- t->time.tm_year = -1;
- t->time.tm_wday = -1;
- t->time.tm_yday = -1;
- t->time.tm_isdst = -1;
/* ... and status */
t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE);
diff --git a/drivers/rtc/rtc-ds1343.c b/drivers/rtc/rtc-ds1343.c
index 23fa9f0cb..895fbeeb4 100644
--- a/drivers/rtc/rtc-ds1343.c
+++ b/drivers/rtc/rtc-ds1343.c
@@ -504,12 +504,6 @@ static int ds1343_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
alarm->time.tm_hour = priv->alarm_hour < 0 ? 0 : priv->alarm_hour;
alarm->time.tm_mday = priv->alarm_mday < 0 ? 0 : priv->alarm_mday;
- alarm->time.tm_mon = -1;
- alarm->time.tm_year = -1;
- alarm->time.tm_wday = -1;
- alarm->time.tm_yday = -1;
- alarm->time.tm_isdst = -1;
-
out:
mutex_unlock(&priv->mutex);
return res;
diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
index b3ce3c652..ed43b4311 100644
--- a/drivers/rtc/rtc-ds1685.c
+++ b/drivers/rtc/rtc-ds1685.c
@@ -103,6 +103,26 @@ ds1685_rtc_bin2bcd(struct ds1685_priv *rtc, u8 val, u8 bin_mask, u8 bcd_mask)
}
/**
+ * s1685_rtc_check_mday - check validity of the day of month.
+ * @rtc: pointer to the ds1685 rtc structure.
+ * @mday: day of month.
+ *
+ * Returns -EDOM if the day of month is not within 1..31 range.
+ */
+static inline int
+ds1685_rtc_check_mday(struct ds1685_priv *rtc, u8 mday)
+{
+ if (rtc->bcd_mode) {
+ if (mday < 0x01 || mday > 0x31 || (mday & 0x0f) > 0x09)
+ return -EDOM;
+ } else {
+ if (mday < 1 || mday > 31)
+ return -EDOM;
+ }
+ return 0;
+}
+
+/**
* ds1685_rtc_switch_to_bank0 - switch the rtc to bank 0.
* @rtc: pointer to the ds1685 rtc structure.
*/
@@ -377,6 +397,7 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
struct platform_device *pdev = to_platform_device(dev);
struct ds1685_priv *rtc = platform_get_drvdata(pdev);
u8 seconds, minutes, hours, mday, ctrlb, ctrlc;
+ int ret;
/* Fetch the alarm info from the RTC alarm registers. */
ds1685_rtc_begin_data_access(rtc);
@@ -388,34 +409,29 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
ctrlc = rtc->read(rtc, RTC_CTRL_C);
ds1685_rtc_end_data_access(rtc);
- /* Check month date. */
- if (!(mday >= 1) && (mday <= 31))
- return -EDOM;
+ /* Check the month date for validity. */
+ ret = ds1685_rtc_check_mday(rtc, mday);
+ if (ret)
+ return ret;
/*
* Check the three alarm bytes.
*
* The Linux RTC system doesn't support the "don't care" capability
* of this RTC chip. We check for it anyways in case support is
- * added in the future.
+ * added in the future and only assign when we care.
*/
- if (unlikely(seconds >= 0xc0))
- alrm->time.tm_sec = -1;
- else
+ if (likely(seconds < 0xc0))
alrm->time.tm_sec = ds1685_rtc_bcd2bin(rtc, seconds,
RTC_SECS_BCD_MASK,
RTC_SECS_BIN_MASK);
- if (unlikely(minutes >= 0xc0))
- alrm->time.tm_min = -1;
- else
+ if (likely(minutes < 0xc0))
alrm->time.tm_min = ds1685_rtc_bcd2bin(rtc, minutes,
RTC_MINS_BCD_MASK,
RTC_MINS_BIN_MASK);
- if (unlikely(hours >= 0xc0))
- alrm->time.tm_hour = -1;
- else
+ if (likely(hours < 0xc0))
alrm->time.tm_hour = ds1685_rtc_bcd2bin(rtc, hours,
RTC_HRS_24_BCD_MASK,
RTC_HRS_24_BIN_MASK);
@@ -423,11 +439,6 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
/* Write the data to rtc_wkalrm. */
alrm->time.tm_mday = ds1685_rtc_bcd2bin(rtc, mday, RTC_MDAY_BCD_MASK,
RTC_MDAY_BIN_MASK);
- alrm->time.tm_mon = -1;
- alrm->time.tm_year = -1;
- alrm->time.tm_wday = -1;
- alrm->time.tm_yday = -1;
- alrm->time.tm_isdst = -1;
alrm->enabled = !!(ctrlb & RTC_CTRL_B_AIE);
alrm->pending = !!(ctrlc & RTC_CTRL_C_AF);
@@ -445,6 +456,7 @@ ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
struct platform_device *pdev = to_platform_device(dev);
struct ds1685_priv *rtc = platform_get_drvdata(pdev);
u8 ctrlb, seconds, minutes, hours, mday;
+ int ret;
/* Fetch the alarm info and convert to BCD. */
seconds = ds1685_rtc_bin2bcd(rtc, alrm->time.tm_sec,
@@ -461,8 +473,9 @@ ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
RTC_MDAY_BCD_MASK);
/* Check the month date for validity. */
- if (!(mday >= 1) && (mday <= 31))
- return -EDOM;
+ ret = ds1685_rtc_check_mday(rtc, mday);
+ if (ret)
+ return ret;
/*
* Check the three alarm bytes.
diff --git a/drivers/rtc/rtc-ds2404.c b/drivers/rtc/rtc-ds2404.c
index 16310fe79..9a1582ed7 100644
--- a/drivers/rtc/rtc-ds2404.c
+++ b/drivers/rtc/rtc-ds2404.c
@@ -13,7 +13,7 @@
#include <linux/rtc.h>
#include <linux/types.h>
#include <linux/bcd.h>
-#include <linux/rtc-ds2404.h>
+#include <linux/platform_data/rtc-ds2404.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/slab.h>
diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c
index 04fbd7fff..b1f20d8c3 100644
--- a/drivers/rtc/rtc-ds3232.c
+++ b/drivers/rtc/rtc-ds3232.c
@@ -197,12 +197,6 @@ static int ds3232_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
alarm->time.tm_hour = bcd2bin(buf[2] & 0x7F);
alarm->time.tm_mday = bcd2bin(buf[3] & 0x7F);
- alarm->time.tm_mon = -1;
- alarm->time.tm_year = -1;
- alarm->time.tm_wday = -1;
- alarm->time.tm_yday = -1;
- alarm->time.tm_isdst = -1;
-
alarm->enabled = !!(control & DS3232_REG_CR_A1IE);
alarm->pending = !!(stat & DS3232_REG_SR_A1F);
diff --git a/drivers/rtc/rtc-efi.c b/drivers/rtc/rtc-efi.c
index 96d38609d..0130afd7f 100644
--- a/drivers/rtc/rtc-efi.c
+++ b/drivers/rtc/rtc-efi.c
@@ -259,6 +259,12 @@ static const struct rtc_class_ops efi_rtc_ops = {
static int __init efi_rtc_probe(struct platform_device *dev)
{
struct rtc_device *rtc;
+ efi_time_t eft;
+ efi_time_cap_t cap;
+
+ /* First check if the RTC is usable */
+ if (efi.get_time(&eft, &cap) != EFI_SUCCESS)
+ return -ENODEV;
rtc = devm_rtc_device_register(&dev->dev, "rtc-efi", &efi_rtc_ops,
THIS_MODULE);
diff --git a/drivers/rtc/rtc-generic.c b/drivers/rtc/rtc-generic.c
index d726c6aa9..1bf5d2347 100644
--- a/drivers/rtc/rtc-generic.c
+++ b/drivers/rtc/rtc-generic.c
@@ -9,44 +9,10 @@
#include <linux/platform_device.h>
#include <linux/rtc.h>
-#if defined(CONFIG_M68K) || defined(CONFIG_PARISC) || \
- defined(CONFIG_PPC) || defined(CONFIG_SUPERH32)
-#include <asm/rtc.h>
-
-static int generic_get_time(struct device *dev, struct rtc_time *tm)
-{
- unsigned int ret = get_rtc_time(tm);
-
- if (ret & RTC_BATT_BAD)
- return -EOPNOTSUPP;
-
- return rtc_valid_tm(tm);
-}
-
-static int generic_set_time(struct device *dev, struct rtc_time *tm)
-{
- if (set_rtc_time(tm) < 0)
- return -EOPNOTSUPP;
-
- return 0;
-}
-
-static const struct rtc_class_ops generic_rtc_ops = {
- .read_time = generic_get_time,
- .set_time = generic_set_time,
-};
-#else
-#define generic_rtc_ops *(struct rtc_class_ops*)NULL
-#endif
-
static int __init generic_rtc_probe(struct platform_device *dev)
{
struct rtc_device *rtc;
- const struct rtc_class_ops *ops;
-
- ops = dev_get_platdata(&dev->dev);
- if (!ops)
- ops = &generic_rtc_ops;
+ const struct rtc_class_ops *ops = dev_get_platdata(&dev->dev);
rtc = devm_rtc_device_register(&dev->dev, "rtc-generic",
ops, THIS_MODULE);
diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c
index 207270376..e5ad527cb 100644
--- a/drivers/rtc/rtc-hym8563.c
+++ b/drivers/rtc/rtc-hym8563.c
@@ -198,7 +198,7 @@ static int hym8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
return ret;
/* The alarm only has a minute accuracy */
- alm_tm->tm_sec = -1;
+ alm_tm->tm_sec = 0;
alm_tm->tm_min = (buf[0] & HYM8563_ALM_BIT_DISABLE) ?
-1 :
@@ -213,9 +213,6 @@ static int hym8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
-1 :
bcd2bin(buf[3] & HYM8563_WEEKDAY_MASK);
- alm_tm->tm_mon = -1;
- alm_tm->tm_year = -1;
-
ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
if (ret < 0)
return ret;
diff --git a/drivers/rtc/rtc-isl12057.c b/drivers/rtc/rtc-isl12057.c
index 54328d4ac..0e7f0f52b 100644
--- a/drivers/rtc/rtc-isl12057.c
+++ b/drivers/rtc/rtc-isl12057.c
@@ -245,8 +245,7 @@ static int isl12057_rtc_update_alarm(struct device *dev, int enable)
static int isl12057_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
struct isl12057_rtc_data *data = dev_get_drvdata(dev);
- struct rtc_time rtc_tm, *alarm_tm = &alarm->time;
- unsigned long rtc_secs, alarm_secs;
+ struct rtc_time *alarm_tm = &alarm->time;
u8 regs[ISL12057_A1_SEC_LEN];
unsigned int ir;
int ret;
@@ -264,36 +263,6 @@ static int isl12057_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
alarm_tm->tm_min = bcd2bin(regs[1] & 0x7f);
alarm_tm->tm_hour = bcd2bin(regs[2] & 0x3f);
alarm_tm->tm_mday = bcd2bin(regs[3] & 0x3f);
- alarm_tm->tm_wday = -1;
-
- /*
- * The alarm section does not store year/month. We use the ones in rtc
- * section as a basis and increment month and then year if needed to get
- * alarm after current time.
- */
- ret = _isl12057_rtc_read_time(dev, &rtc_tm);
- if (ret)
- goto err_unlock;
-
- alarm_tm->tm_year = rtc_tm.tm_year;
- alarm_tm->tm_mon = rtc_tm.tm_mon;
-
- ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
- if (ret)
- goto err_unlock;
-
- ret = rtc_tm_to_time(alarm_tm, &alarm_secs);
- if (ret)
- goto err_unlock;
-
- if (alarm_secs < rtc_secs) {
- if (alarm_tm->tm_mon == 11) {
- alarm_tm->tm_mon = 0;
- alarm_tm->tm_year += 1;
- } else {
- alarm_tm->tm_mon += 1;
- }
- }
ret = regmap_read(data->regmap, ISL12057_REG_INT, &ir);
if (ret) {
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index d1bf93a87..58698d21c 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -244,7 +244,7 @@ static int m41t80_alarm_irq_enable(struct device *dev, unsigned int enabled)
retval = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, flags);
if (retval < 0) {
- dev_info(dev, "Unable to enable alarm IRQ %d\n", retval);
+ dev_err(dev, "Unable to enable alarm IRQ %d\n", retval);
return retval;
}
return 0;
@@ -320,10 +320,8 @@ static int m41t80_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
alrm->time.tm_sec = bcd2bin(alarmvals[4] & 0x7f);
alrm->time.tm_min = bcd2bin(alarmvals[3] & 0x7f);
alrm->time.tm_hour = bcd2bin(alarmvals[2] & 0x3f);
- alrm->time.tm_wday = -1;
alrm->time.tm_mday = bcd2bin(alarmvals[1] & 0x3f);
alrm->time.tm_mon = bcd2bin(alarmvals[0] & 0x3f);
- alrm->time.tm_year = -1;
alrm->enabled = !!(alarmvals[0] & M41T80_ALMON_AFE);
alrm->pending = (flags & M41T80_FLAGS_AF) && alrm->enabled;
@@ -337,6 +335,30 @@ static struct rtc_class_ops m41t80_rtc_ops = {
.proc = m41t80_rtc_proc,
};
+#ifdef CONFIG_PM_SLEEP
+static int m41t80_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ if (client->irq >= 0 && device_may_wakeup(dev))
+ enable_irq_wake(client->irq);
+
+ return 0;
+}
+
+static int m41t80_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ if (client->irq >= 0 && device_may_wakeup(dev))
+ disable_irq_wake(client->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume);
+
static ssize_t flags_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -831,10 +853,9 @@ static int m41t80_probe(struct i2c_client *client,
return rc;
}
- rc = devm_add_action(&client->dev, m41t80_remove_sysfs_group,
- &client->dev);
+ rc = devm_add_action_or_reset(&client->dev, m41t80_remove_sysfs_group,
+ &client->dev);
if (rc) {
- m41t80_remove_sysfs_group(&client->dev);
dev_err(&client->dev,
"Failed to add sysfs cleanup action: %d\n", rc);
return rc;
@@ -873,6 +894,7 @@ static int m41t80_remove(struct i2c_client *client)
static struct i2c_driver m41t80_driver = {
.driver = {
.name = "rtc-m41t80",
+ .pm = &m41t80_pm,
},
.probe = m41t80_probe,
.remove = m41t80_remove,
diff --git a/drivers/rtc/rtc-m48t86.c b/drivers/rtc/rtc-m48t86.c
index f72b91f25..0eeb5714c 100644
--- a/drivers/rtc/rtc-m48t86.c
+++ b/drivers/rtc/rtc-m48t86.c
@@ -16,7 +16,7 @@
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
-#include <linux/m48t86.h>
+#include <linux/platform_data/rtc-m48t86.h>
#include <linux/bcd.h>
#define M48T86_REG_SEC 0x00
diff --git a/drivers/rtc/rtc-max6916.c b/drivers/rtc/rtc-max6916.c
new file mode 100644
index 000000000..623ab27b2
--- /dev/null
+++ b/drivers/rtc/rtc-max6916.c
@@ -0,0 +1,164 @@
+/* rtc-max6916.c
+ *
+ * Driver for MAXIM max6916 Low Current, SPI Compatible
+ * Real Time Clock
+ *
+ * Author : Venkat Prashanth B U <venkat.prashanth2498@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+/* Registers in max6916 rtc */
+
+#define MAX6916_SECONDS_REG 0x01
+#define MAX6916_MINUTES_REG 0x02
+#define MAX6916_HOURS_REG 0x03
+#define MAX6916_DATE_REG 0x04
+#define MAX6916_MONTH_REG 0x05
+#define MAX6916_DAY_REG 0x06
+#define MAX6916_YEAR_REG 0x07
+#define MAX6916_CONTROL_REG 0x08
+#define MAX6916_STATUS_REG 0x0C
+#define MAX6916_CLOCK_BURST 0x3F
+
+static int max6916_read_reg(struct device *dev, unsigned char address,
+ unsigned char *data)
+{
+ struct spi_device *spi = to_spi_device(dev);
+
+ *data = address | 0x80;
+
+ return spi_write_then_read(spi, data, 1, data, 1);
+}
+
+static int max6916_write_reg(struct device *dev, unsigned char address,
+ unsigned char data)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ unsigned char buf[2];
+
+ buf[0] = address & 0x7F;
+ buf[1] = data;
+
+ return spi_write_then_read(spi, buf, 2, NULL, 0);
+}
+
+static int max6916_read_time(struct device *dev, struct rtc_time *dt)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ int err;
+ unsigned char buf[8];
+
+ buf[0] = MAX6916_CLOCK_BURST | 0x80;
+
+ err = spi_write_then_read(spi, buf, 1, buf, 8);
+
+ if (err)
+ return err;
+
+ dt->tm_sec = bcd2bin(buf[0]);
+ dt->tm_min = bcd2bin(buf[1]);
+ dt->tm_hour = bcd2bin(buf[2] & 0x3F);
+ dt->tm_mday = bcd2bin(buf[3]);
+ dt->tm_mon = bcd2bin(buf[4]) - 1;
+ dt->tm_wday = bcd2bin(buf[5]) - 1;
+ dt->tm_year = bcd2bin(buf[6]) + 100;
+
+ return rtc_valid_tm(dt);
+}
+
+static int max6916_set_time(struct device *dev, struct rtc_time *dt)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ unsigned char buf[9];
+
+ if (dt->tm_year < 100 || dt->tm_year > 199) {
+ dev_err(&spi->dev, "Year must be between 2000 and 2099. It's %d.\n",
+ dt->tm_year + 1900);
+ return -EINVAL;
+ }
+
+ buf[0] = MAX6916_CLOCK_BURST & 0x7F;
+ buf[1] = bin2bcd(dt->tm_sec);
+ buf[2] = bin2bcd(dt->tm_min);
+ buf[3] = (bin2bcd(dt->tm_hour) & 0X3F);
+ buf[4] = bin2bcd(dt->tm_mday);
+ buf[5] = bin2bcd(dt->tm_mon + 1);
+ buf[6] = bin2bcd(dt->tm_wday + 1);
+ buf[7] = bin2bcd(dt->tm_year % 100);
+ buf[8] = bin2bcd(0x00);
+
+ /* write the rtc settings */
+ return spi_write_then_read(spi, buf, 9, NULL, 0);
+}
+
+static const struct rtc_class_ops max6916_rtc_ops = {
+ .read_time = max6916_read_time,
+ .set_time = max6916_set_time,
+};
+
+static int max6916_probe(struct spi_device *spi)
+{
+ struct rtc_device *rtc;
+ unsigned char data;
+ int res;
+
+ /* spi setup with max6916 in mode 3 and bits per word as 8 */
+ spi->mode = SPI_MODE_3;
+ spi->bits_per_word = 8;
+ spi_setup(spi);
+
+ /* RTC Settings */
+ res = max6916_read_reg(&spi->dev, MAX6916_SECONDS_REG, &data);
+ if (res)
+ return res;
+
+ /* Disable the write protect of rtc */
+ max6916_read_reg(&spi->dev, MAX6916_CONTROL_REG, &data);
+ data = data & ~(1 << 7);
+ max6916_write_reg(&spi->dev, MAX6916_CONTROL_REG, data);
+
+ /*Enable oscillator,disable oscillator stop flag, glitch filter*/
+ max6916_read_reg(&spi->dev, MAX6916_STATUS_REG, &data);
+ data = data & 0x1B;
+ max6916_write_reg(&spi->dev, MAX6916_STATUS_REG, data);
+
+ /* display the settings */
+ max6916_read_reg(&spi->dev, MAX6916_CONTROL_REG, &data);
+ dev_info(&spi->dev, "MAX6916 RTC CTRL Reg = 0x%02x\n", data);
+
+ max6916_read_reg(&spi->dev, MAX6916_STATUS_REG, &data);
+ dev_info(&spi->dev, "MAX6916 RTC Status Reg = 0x%02x\n", data);
+
+ rtc = devm_rtc_device_register(&spi->dev, "max6916",
+ &max6916_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
+
+ spi_set_drvdata(spi, rtc);
+
+ return 0;
+}
+
+static struct spi_driver max6916_driver = {
+ .driver = {
+ .name = "max6916",
+ },
+ .probe = max6916_probe,
+};
+module_spi_driver(max6916_driver);
+
+MODULE_DESCRIPTION("MAX6916 SPI RTC DRIVER");
+MODULE_AUTHOR("Venkat Prashanth B U <venkat.prashanth2498@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/rtc-mc146818-lib.c b/drivers/rtc/rtc-mc146818-lib.c
new file mode 100644
index 000000000..2f1772a35
--- /dev/null
+++ b/drivers/rtc/rtc-mc146818-lib.c
@@ -0,0 +1,198 @@
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/mc146818rtc.h>
+
+#ifdef CONFIG_ACPI
+#include <linux/acpi.h>
+#endif
+
+/*
+ * Returns true if a clock update is in progress
+ */
+static inline unsigned char mc146818_is_updating(void)
+{
+ unsigned char uip;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+ uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ return uip;
+}
+
+unsigned int mc146818_get_time(struct rtc_time *time)
+{
+ unsigned char ctrl;
+ unsigned long flags;
+ unsigned char century = 0;
+
+#ifdef CONFIG_MACH_DECSTATION
+ unsigned int real_year;
+#endif
+
+ /*
+ * read RTC once any update in progress is done. The update
+ * can take just over 2ms. We wait 20ms. There is no need to
+ * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
+ * If you need to know *exactly* when a second has started, enable
+ * periodic update complete interrupts, (via ioctl) and then
+ * immediately read /dev/rtc which will block until you get the IRQ.
+ * Once the read clears, read the RTC time (again via ioctl). Easy.
+ */
+ if (mc146818_is_updating())
+ mdelay(20);
+
+ /*
+ * Only the values that we read from the RTC are set. We leave
+ * tm_wday, tm_yday and tm_isdst untouched. Even though the
+ * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
+ * by the RTC when initially set to a non-zero value.
+ */
+ spin_lock_irqsave(&rtc_lock, flags);
+ time->tm_sec = CMOS_READ(RTC_SECONDS);
+ time->tm_min = CMOS_READ(RTC_MINUTES);
+ time->tm_hour = CMOS_READ(RTC_HOURS);
+ time->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
+ time->tm_mon = CMOS_READ(RTC_MONTH);
+ time->tm_year = CMOS_READ(RTC_YEAR);
+#ifdef CONFIG_MACH_DECSTATION
+ real_year = CMOS_READ(RTC_DEC_YEAR);
+#endif
+#ifdef CONFIG_ACPI
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+ acpi_gbl_FADT.century)
+ century = CMOS_READ(acpi_gbl_FADT.century);
+#endif
+ ctrl = CMOS_READ(RTC_CONTROL);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
+ if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ {
+ time->tm_sec = bcd2bin(time->tm_sec);
+ time->tm_min = bcd2bin(time->tm_min);
+ time->tm_hour = bcd2bin(time->tm_hour);
+ time->tm_mday = bcd2bin(time->tm_mday);
+ time->tm_mon = bcd2bin(time->tm_mon);
+ time->tm_year = bcd2bin(time->tm_year);
+ century = bcd2bin(century);
+ }
+
+#ifdef CONFIG_MACH_DECSTATION
+ time->tm_year += real_year - 72;
+#endif
+
+ if (century)
+ time->tm_year += (century - 19) * 100;
+
+ /*
+ * Account for differences between how the RTC uses the values
+ * and how they are defined in a struct rtc_time;
+ */
+ if (time->tm_year <= 69)
+ time->tm_year += 100;
+
+ time->tm_mon--;
+
+ return RTC_24H;
+}
+EXPORT_SYMBOL_GPL(mc146818_get_time);
+
+/* Set the current date and time in the real time clock. */
+int mc146818_set_time(struct rtc_time *time)
+{
+ unsigned long flags;
+ unsigned char mon, day, hrs, min, sec;
+ unsigned char save_control, save_freq_select;
+ unsigned int yrs;
+#ifdef CONFIG_MACH_DECSTATION
+ unsigned int real_yrs, leap_yr;
+#endif
+ unsigned char century = 0;
+
+ yrs = time->tm_year;
+ mon = time->tm_mon + 1; /* tm_mon starts at zero */
+ day = time->tm_mday;
+ hrs = time->tm_hour;
+ min = time->tm_min;
+ sec = time->tm_sec;
+
+ if (yrs > 255) /* They are unsigned */
+ return -EINVAL;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+#ifdef CONFIG_MACH_DECSTATION
+ real_yrs = yrs;
+ leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) ||
+ !((yrs + 1900) % 400));
+ yrs = 72;
+
+ /*
+ * We want to keep the year set to 73 until March
+ * for non-leap years, so that Feb, 29th is handled
+ * correctly.
+ */
+ if (!leap_yr && mon < 3) {
+ real_yrs--;
+ yrs = 73;
+ }
+#endif
+
+#ifdef CONFIG_ACPI
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+ acpi_gbl_FADT.century) {
+ century = (yrs + 1900) / 100;
+ yrs %= 100;
+ }
+#endif
+
+ /* These limits and adjustments are independent of
+ * whether the chip is in binary mode or not.
+ */
+ if (yrs > 169) {
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ return -EINVAL;
+ }
+
+ if (yrs >= 100)
+ yrs -= 100;
+
+ if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
+ || RTC_ALWAYS_BCD) {
+ sec = bin2bcd(sec);
+ min = bin2bcd(min);
+ hrs = bin2bcd(hrs);
+ day = bin2bcd(day);
+ mon = bin2bcd(mon);
+ yrs = bin2bcd(yrs);
+ century = bin2bcd(century);
+ }
+
+ save_control = CMOS_READ(RTC_CONTROL);
+ CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+ CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+#ifdef CONFIG_MACH_DECSTATION
+ CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
+#endif
+ CMOS_WRITE(yrs, RTC_YEAR);
+ CMOS_WRITE(mon, RTC_MONTH);
+ CMOS_WRITE(day, RTC_DAY_OF_MONTH);
+ CMOS_WRITE(hrs, RTC_HOURS);
+ CMOS_WRITE(min, RTC_MINUTES);
+ CMOS_WRITE(sec, RTC_SECONDS);
+#ifdef CONFIG_ACPI
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+ acpi_gbl_FADT.century)
+ CMOS_WRITE(century, acpi_gbl_FADT.century);
+#endif
+
+ CMOS_WRITE(save_control, RTC_CONTROL);
+ CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mc146818_set_time);
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index 0094d9bdd..7334c44fa 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -32,11 +32,11 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/kernel.h>
+#include <linux/mc146818rtc.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sfi.h>
-#include <asm-generic/rtc.h>
#include <asm/intel_scu_ipc.h>
#include <asm/intel-mid.h>
#include <asm/intel_mid_vrtc.h>
@@ -149,14 +149,6 @@ static int mrst_read_alarm(struct device *dev, struct rtc_wkalrm *t)
if (mrst->irq <= 0)
return -EIO;
- /* Basic alarms only support hour, minute, and seconds fields.
- * Some also support day and month, for alarms up to a year in
- * the future.
- */
- t->time.tm_mday = -1;
- t->time.tm_mon = -1;
- t->time.tm_year = -1;
-
/* vRTC only supports binary mode */
spin_lock_irq(&rtc_lock);
t->time.tm_sec = vrtc_cmos_read(RTC_SECONDS_ALARM);
diff --git a/drivers/rtc/rtc-opal.c b/drivers/rtc/rtc-opal.c
index 9c18d6fd8..ea20f627d 100644
--- a/drivers/rtc/rtc-opal.c
+++ b/drivers/rtc/rtc-opal.c
@@ -134,7 +134,7 @@ static int opal_get_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
goto exit;
}
- rc = be64_to_cpu(msg.params[1]);
+ rc = opal_get_async_rc(msg);
if (rc != OPAL_SUCCESS) {
rc = -EIO;
goto exit;
@@ -181,7 +181,7 @@ static int opal_set_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
goto exit;
}
- rc = be64_to_cpu(msg.params[1]);
+ rc = opal_get_async_rc(msg);
if (rc != OPAL_SUCCESS)
rc = -EIO;
diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index f22e06070..b4478cc92 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -96,7 +96,7 @@
#define CD_TMR_TE BIT(3) /* Countdown timer enable */
/* PCF2123_REG_OFFSET BITS */
-#define OFFSET_SIGN_BIT BIT(6) /* 2's complement sign bit */
+#define OFFSET_SIGN_BIT 6 /* 2's complement sign bit */
#define OFFSET_COARSE BIT(7) /* Coarse mode offset */
#define OFFSET_STEP (2170) /* Offset step in parts per billion */
@@ -217,7 +217,7 @@ static int pcf2123_read_offset(struct device *dev, long *offset)
if (reg & OFFSET_COARSE)
reg <<= 1; /* multiply by 2 and sign extend */
else
- reg |= (reg & OFFSET_SIGN_BIT) << 1; /* sign extend only */
+ reg = sign_extend32(reg, OFFSET_SIGN_BIT);
*offset = ((long)reg) * OFFSET_STEP;
diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index e8ddbb359..efb0a08ac 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -16,6 +16,16 @@
#include <linux/rtc.h>
#include <linux/module.h>
+/*
+ * Information for this driver was pulled from the following datasheets.
+ *
+ * http://www.nxp.com/documents/data_sheet/PCF85063A.pdf
+ * http://www.nxp.com/documents/data_sheet/PCF85063TP.pdf
+ *
+ * PCF85063A -- Rev. 6 — 18 November 2015
+ * PCF85063TP -- Rev. 4 — 6 May 2015
+*/
+
#define PCF85063_REG_CTRL1 0x00 /* status */
#define PCF85063_REG_CTRL1_STOP BIT(5)
#define PCF85063_REG_CTRL2 0x01
@@ -55,10 +65,22 @@ static int pcf85063_stop_clock(struct i2c_client *client, u8 *ctrl1)
return 0;
}
-/*
- * In the routines that deal directly with the pcf85063 hardware, we use
- * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
- */
+static int pcf85063_start_clock(struct i2c_client *client, u8 ctrl1)
+{
+ s32 ret;
+
+ /* start the clock */
+ ctrl1 &= PCF85063_REG_CTRL1_STOP;
+
+ ret = i2c_smbus_write_byte_data(client, PCF85063_REG_CTRL1, ctrl1);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failing to start the clock\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
static int pcf85063_get_datetime(struct i2c_client *client, struct rtc_time *tm)
{
int rc;
@@ -90,8 +112,7 @@ static int pcf85063_get_datetime(struct i2c_client *client, struct rtc_time *tm)
tm->tm_wday = regs[4] & 0x07;
tm->tm_mon = bcd2bin(regs[5] & 0x1F) - 1; /* rtc mn 1-12 */
tm->tm_year = bcd2bin(regs[6]);
- if (tm->tm_year < 70)
- tm->tm_year += 100; /* assume we are in 1970...2069 */
+ tm->tm_year += 100;
return rtc_valid_tm(tm);
}
@@ -99,13 +120,17 @@ static int pcf85063_get_datetime(struct i2c_client *client, struct rtc_time *tm)
static int pcf85063_set_datetime(struct i2c_client *client, struct rtc_time *tm)
{
int rc;
- u8 regs[8];
+ u8 regs[7];
+ u8 ctrl1;
+
+ if ((tm->tm_year < 100) || (tm->tm_year > 199))
+ return -EINVAL;
/*
* to accurately set the time, reset the divider chain and keep it in
* reset state until all time/date registers are written
*/
- rc = pcf85063_stop_clock(client, &regs[7]);
+ rc = pcf85063_stop_clock(client, &ctrl1);
if (rc != 0)
return rc;
@@ -125,14 +150,7 @@ static int pcf85063_set_datetime(struct i2c_client *client, struct rtc_time *tm)
regs[5] = bin2bcd(tm->tm_mon + 1);
/* year and century */
- regs[6] = bin2bcd(tm->tm_year % 100);
-
- /*
- * after all time/date registers are written, let the 'address auto
- * increment' feature wrap around and write register CTRL1 to re-enable
- * the clock divider chain again
- */
- regs[7] &= ~PCF85063_REG_CTRL1_STOP;
+ regs[6] = bin2bcd(tm->tm_year - 100);
/* write all registers at once */
rc = i2c_smbus_write_i2c_block_data(client, PCF85063_REG_SC,
@@ -142,6 +160,15 @@ static int pcf85063_set_datetime(struct i2c_client *client, struct rtc_time *tm)
return rc;
}
+ /*
+ * Write the control register as a separate action since the size of
+ * the register space is different between the PCF85063TP and
+ * PCF85063A devices. The rollover point can not be used.
+ */
+ rc = pcf85063_start_clock(client, ctrl1);
+ if (rc != 0)
+ return rc;
+
return 0;
}
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index b9ddbb001..1227ceab6 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -341,14 +341,11 @@ static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
"%s: raw data is min=%02x, hr=%02x, mday=%02x, wday=%02x\n",
__func__, buf[0], buf[1], buf[2], buf[3]);
+ tm->time.tm_sec = 0;
tm->time.tm_min = bcd2bin(buf[0] & 0x7F);
tm->time.tm_hour = bcd2bin(buf[1] & 0x3F);
tm->time.tm_mday = bcd2bin(buf[2] & 0x3F);
tm->time.tm_wday = bcd2bin(buf[3] & 0x7);
- tm->time.tm_mon = -1;
- tm->time.tm_year = -1;
- tm->time.tm_yday = -1;
- tm->time.tm_isdst = -1;
err = pcf8563_get_alarm_mode(client, &tm->enabled, &tm->pending);
if (err < 0)
diff --git a/drivers/rtc/rtc-rc5t583.c b/drivers/rtc/rtc-rc5t583.c
index f28d57788..68ce77414 100644
--- a/drivers/rtc/rtc-rc5t583.c
+++ b/drivers/rtc/rtc-rc5t583.c
@@ -128,6 +128,7 @@ static int rc5t583_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
return ret;
}
+ alm->time.tm_sec = 0;
alm->time.tm_min = bcd2bin(alarm_data[0]);
alm->time.tm_hour = bcd2bin(alarm_data[1]);
alm->time.tm_mday = bcd2bin(alarm_data[2]);
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index ef8622942..c8c757466 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -341,12 +341,6 @@ static int rs5c_read_alarm(struct device *dev, struct rtc_wkalrm *t)
t->time.tm_sec = 0;
t->time.tm_min = bcd2bin(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f);
t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]);
- t->time.tm_mday = -1;
- t->time.tm_mon = -1;
- t->time.tm_year = -1;
- t->time.tm_wday = -1;
- t->time.tm_yday = -1;
- t->time.tm_isdst = -1;
/* ... and status */
t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE);
diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
index f623038e5..9a2f6a95d 100644
--- a/drivers/rtc/rtc-rv8803.c
+++ b/drivers/rtc/rtc-rv8803.c
@@ -13,12 +13,15 @@
#include <linux/bcd.h>
#include <linux/bitops.h>
+#include <linux/log2.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/rtc.h>
+#define RV8803_I2C_TRY_COUNT 4
+
#define RV8803_SEC 0x00
#define RV8803_MIN 0x01
#define RV8803_HOUR 0x02
@@ -56,19 +59,85 @@ struct rv8803_data {
u8 ctrl;
};
+static int rv8803_read_reg(const struct i2c_client *client, u8 reg)
+{
+ int try = RV8803_I2C_TRY_COUNT;
+ s32 ret;
+
+ /*
+ * There is a 61µs window during which the RTC does not acknowledge I2C
+ * transfers. In that case, ensure that there are multiple attempts.
+ */
+ do
+ ret = i2c_smbus_read_byte_data(client, reg);
+ while ((ret == -ENXIO || ret == -EIO) && --try);
+ if (ret < 0)
+ dev_err(&client->dev, "Unable to read register 0x%02x\n", reg);
+
+ return ret;
+}
+
+static int rv8803_read_regs(const struct i2c_client *client,
+ u8 reg, u8 count, u8 *values)
+{
+ int try = RV8803_I2C_TRY_COUNT;
+ s32 ret;
+
+ do
+ ret = i2c_smbus_read_i2c_block_data(client, reg, count, values);
+ while ((ret == -ENXIO || ret == -EIO) && --try);
+ if (ret != count) {
+ dev_err(&client->dev,
+ "Unable to read registers 0x%02x..0x%02x\n",
+ reg, reg + count - 1);
+ return ret < 0 ? ret : -EIO;
+ }
+
+ return 0;
+}
+
+static int rv8803_write_reg(const struct i2c_client *client, u8 reg, u8 value)
+{
+ int try = RV8803_I2C_TRY_COUNT;
+ s32 ret;
+
+ do
+ ret = i2c_smbus_write_byte_data(client, reg, value);
+ while ((ret == -ENXIO || ret == -EIO) && --try);
+ if (ret)
+ dev_err(&client->dev, "Unable to write register 0x%02x\n", reg);
+
+ return ret;
+}
+
+static int rv8803_write_regs(const struct i2c_client *client,
+ u8 reg, u8 count, const u8 *values)
+{
+ int try = RV8803_I2C_TRY_COUNT;
+ s32 ret;
+
+ do
+ ret = i2c_smbus_write_i2c_block_data(client, reg, count,
+ values);
+ while ((ret == -ENXIO || ret == -EIO) && --try);
+ if (ret)
+ dev_err(&client->dev,
+ "Unable to write registers 0x%02x..0x%02x\n",
+ reg, reg + count - 1);
+
+ return ret;
+}
+
static irqreturn_t rv8803_handle_irq(int irq, void *dev_id)
{
struct i2c_client *client = dev_id;
struct rv8803_data *rv8803 = i2c_get_clientdata(client);
unsigned long events = 0;
- int flags, try = 0;
+ int flags;
mutex_lock(&rv8803->flags_lock);
- do {
- flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
- try++;
- } while ((flags == -ENXIO) && (try < 3));
+ flags = rv8803_read_reg(client, RV8803_FLAG);
if (flags <= 0) {
mutex_unlock(&rv8803->flags_lock);
return IRQ_NONE;
@@ -100,9 +169,8 @@ static irqreturn_t rv8803_handle_irq(int irq, void *dev_id)
if (events) {
rtc_update_irq(rv8803->rtc, 1, events);
- i2c_smbus_write_byte_data(client, RV8803_FLAG, flags);
- i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL,
- rv8803->ctrl);
+ rv8803_write_reg(client, RV8803_FLAG, flags);
+ rv8803_write_reg(rv8803->client, RV8803_CTRL, rv8803->ctrl);
}
mutex_unlock(&rv8803->flags_lock);
@@ -118,7 +186,7 @@ static int rv8803_get_time(struct device *dev, struct rtc_time *tm)
u8 *date = date1;
int ret, flags;
- flags = i2c_smbus_read_byte_data(rv8803->client, RV8803_FLAG);
+ flags = rv8803_read_reg(rv8803->client, RV8803_FLAG);
if (flags < 0)
return flags;
@@ -127,16 +195,14 @@ static int rv8803_get_time(struct device *dev, struct rtc_time *tm)
return -EINVAL;
}
- ret = i2c_smbus_read_i2c_block_data(rv8803->client, RV8803_SEC,
- 7, date);
- if (ret != 7)
- return ret < 0 ? ret : -EIO;
+ ret = rv8803_read_regs(rv8803->client, RV8803_SEC, 7, date);
+ if (ret)
+ return ret;
if ((date1[RV8803_SEC] & 0x7f) == bin2bcd(59)) {
- ret = i2c_smbus_read_i2c_block_data(rv8803->client, RV8803_SEC,
- 7, date2);
- if (ret != 7)
- return ret < 0 ? ret : -EIO;
+ ret = rv8803_read_regs(rv8803->client, RV8803_SEC, 7, date2);
+ if (ret)
+ return ret;
if ((date2[RV8803_SEC] & 0x7f) != bin2bcd(59))
date = date2;
@@ -145,23 +211,33 @@ static int rv8803_get_time(struct device *dev, struct rtc_time *tm)
tm->tm_sec = bcd2bin(date[RV8803_SEC] & 0x7f);
tm->tm_min = bcd2bin(date[RV8803_MIN] & 0x7f);
tm->tm_hour = bcd2bin(date[RV8803_HOUR] & 0x3f);
- tm->tm_wday = ffs(date[RV8803_WEEK] & 0x7f);
+ tm->tm_wday = ilog2(date[RV8803_WEEK] & 0x7f);
tm->tm_mday = bcd2bin(date[RV8803_DAY] & 0x3f);
tm->tm_mon = bcd2bin(date[RV8803_MONTH] & 0x1f) - 1;
tm->tm_year = bcd2bin(date[RV8803_YEAR]) + 100;
- return rtc_valid_tm(tm);
+ return 0;
}
static int rv8803_set_time(struct device *dev, struct rtc_time *tm)
{
struct rv8803_data *rv8803 = dev_get_drvdata(dev);
u8 date[7];
- int flags, ret;
+ int ctrl, flags, ret;
if ((tm->tm_year < 100) || (tm->tm_year > 199))
return -EINVAL;
+ ctrl = rv8803_read_reg(rv8803->client, RV8803_CTRL);
+ if (ctrl < 0)
+ return ctrl;
+
+ /* Stop the clock */
+ ret = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+ ctrl | RV8803_CTRL_RESET);
+ if (ret)
+ return ret;
+
date[RV8803_SEC] = bin2bcd(tm->tm_sec);
date[RV8803_MIN] = bin2bcd(tm->tm_min);
date[RV8803_HOUR] = bin2bcd(tm->tm_hour);
@@ -170,21 +246,26 @@ static int rv8803_set_time(struct device *dev, struct rtc_time *tm)
date[RV8803_MONTH] = bin2bcd(tm->tm_mon + 1);
date[RV8803_YEAR] = bin2bcd(tm->tm_year - 100);
- ret = i2c_smbus_write_i2c_block_data(rv8803->client, RV8803_SEC,
- 7, date);
- if (ret < 0)
+ ret = rv8803_write_regs(rv8803->client, RV8803_SEC, 7, date);
+ if (ret)
+ return ret;
+
+ /* Restart the clock */
+ ret = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+ ctrl & ~RV8803_CTRL_RESET);
+ if (ret)
return ret;
mutex_lock(&rv8803->flags_lock);
- flags = i2c_smbus_read_byte_data(rv8803->client, RV8803_FLAG);
+ flags = rv8803_read_reg(rv8803->client, RV8803_FLAG);
if (flags < 0) {
mutex_unlock(&rv8803->flags_lock);
return flags;
}
- ret = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG,
- flags & ~RV8803_FLAG_V2F);
+ ret = rv8803_write_reg(rv8803->client, RV8803_FLAG,
+ flags & ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F));
mutex_unlock(&rv8803->flags_lock);
@@ -198,22 +279,18 @@ static int rv8803_get_alarm(struct device *dev, struct rtc_wkalrm *alrm)
u8 alarmvals[3];
int flags, ret;
- ret = i2c_smbus_read_i2c_block_data(client, RV8803_ALARM_MIN,
- 3, alarmvals);
- if (ret != 3)
- return ret < 0 ? ret : -EIO;
+ ret = rv8803_read_regs(client, RV8803_ALARM_MIN, 3, alarmvals);
+ if (ret)
+ return ret;
- flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ flags = rv8803_read_reg(client, RV8803_FLAG);
if (flags < 0)
return flags;
alrm->time.tm_sec = 0;
alrm->time.tm_min = bcd2bin(alarmvals[0] & 0x7f);
alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
- alrm->time.tm_wday = -1;
alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f);
- alrm->time.tm_mon = -1;
- alrm->time.tm_year = -1;
alrm->enabled = !!(rv8803->ctrl & RV8803_CTRL_AIE);
alrm->pending = (flags & RV8803_FLAG_AF) && alrm->enabled;
@@ -239,10 +316,10 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
mutex_lock(&rv8803->flags_lock);
- ret = i2c_smbus_read_i2c_block_data(client, RV8803_FLAG, 2, ctrl);
- if (ret != 2) {
+ ret = rv8803_read_regs(client, RV8803_FLAG, 2, ctrl);
+ if (ret) {
mutex_unlock(&rv8803->flags_lock);
- return ret < 0 ? ret : -EIO;
+ return ret;
}
alarmvals[0] = bin2bcd(alrm->time.tm_min);
@@ -251,8 +328,8 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
if (rv8803->ctrl & (RV8803_CTRL_AIE | RV8803_CTRL_UIE)) {
rv8803->ctrl &= ~(RV8803_CTRL_AIE | RV8803_CTRL_UIE);
- err = i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL,
- rv8803->ctrl);
+ err = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+ rv8803->ctrl);
if (err) {
mutex_unlock(&rv8803->flags_lock);
return err;
@@ -260,13 +337,12 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
}
ctrl[1] &= ~RV8803_FLAG_AF;
- err = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG, ctrl[1]);
+ err = rv8803_write_reg(rv8803->client, RV8803_FLAG, ctrl[1]);
mutex_unlock(&rv8803->flags_lock);
if (err)
return err;
- err = i2c_smbus_write_i2c_block_data(rv8803->client, RV8803_ALARM_MIN,
- 3, alarmvals);
+ err = rv8803_write_regs(rv8803->client, RV8803_ALARM_MIN, 3, alarmvals);
if (err)
return err;
@@ -276,8 +352,8 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
if (rv8803->rtc->aie_timer.enabled)
rv8803->ctrl |= RV8803_CTRL_AIE;
- err = i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL,
- rv8803->ctrl);
+ err = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+ rv8803->ctrl);
if (err)
return err;
}
@@ -306,21 +382,20 @@ static int rv8803_alarm_irq_enable(struct device *dev, unsigned int enabled)
}
mutex_lock(&rv8803->flags_lock);
- flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ flags = rv8803_read_reg(client, RV8803_FLAG);
if (flags < 0) {
mutex_unlock(&rv8803->flags_lock);
return flags;
}
flags &= ~(RV8803_FLAG_AF | RV8803_FLAG_UF);
- err = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags);
+ err = rv8803_write_reg(client, RV8803_FLAG, flags);
mutex_unlock(&rv8803->flags_lock);
if (err)
return err;
if (ctrl != rv8803->ctrl) {
rv8803->ctrl = ctrl;
- err = i2c_smbus_write_byte_data(client, RV8803_CTRL,
- rv8803->ctrl);
+ err = rv8803_write_reg(client, RV8803_CTRL, rv8803->ctrl);
if (err)
return err;
}
@@ -336,7 +411,7 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
switch (cmd) {
case RTC_VL_READ:
- flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ flags = rv8803_read_reg(client, RV8803_FLAG);
if (flags < 0)
return flags;
@@ -355,16 +430,16 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
case RTC_VL_CLR:
mutex_lock(&rv8803->flags_lock);
- flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+ flags = rv8803_read_reg(client, RV8803_FLAG);
if (flags < 0) {
mutex_unlock(&rv8803->flags_lock);
return flags;
}
flags &= ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F);
- ret = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags);
+ ret = rv8803_write_reg(client, RV8803_FLAG, flags);
mutex_unlock(&rv8803->flags_lock);
- if (ret < 0)
+ if (ret)
return ret;
return 0;
@@ -382,8 +457,8 @@ static ssize_t rv8803_nvram_write(struct file *filp, struct kobject *kobj,
struct i2c_client *client = to_i2c_client(dev);
int ret;
- ret = i2c_smbus_write_byte_data(client, RV8803_RAM, buf[0]);
- if (ret < 0)
+ ret = rv8803_write_reg(client, RV8803_RAM, buf[0]);
+ if (ret)
return ret;
return 1;
@@ -397,7 +472,7 @@ static ssize_t rv8803_nvram_read(struct file *filp, struct kobject *kobj,
struct i2c_client *client = to_i2c_client(dev);
int ret;
- ret = i2c_smbus_read_byte_data(client, RV8803_RAM);
+ ret = rv8803_read_reg(client, RV8803_RAM);
if (ret < 0)
return ret;
@@ -427,7 +502,7 @@ static int rv8803_probe(struct i2c_client *client,
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct rv8803_data *rv8803;
- int err, flags, try = 0;
+ int err, flags;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK)) {
@@ -444,16 +519,7 @@ static int rv8803_probe(struct i2c_client *client,
rv8803->client = client;
i2c_set_clientdata(client, rv8803);
- /*
- * There is a 60µs window where the RTC may not reply on the i2c bus in
- * that case, the transfer is not ACKed. In that case, ensure there are
- * multiple attempts.
- */
- do {
- flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
- try++;
- } while ((flags == -ENXIO) && (try < 3));
-
+ flags = rv8803_read_reg(client, RV8803_FLAG);
if (flags < 0)
return flags;
@@ -488,12 +554,7 @@ static int rv8803_probe(struct i2c_client *client,
return PTR_ERR(rv8803->rtc);
}
- try = 0;
- do {
- err = i2c_smbus_write_byte_data(rv8803->client, RV8803_EXT,
- RV8803_EXT_WADA);
- try++;
- } while ((err == -ENXIO) && (try < 3));
+ err = rv8803_write_reg(rv8803->client, RV8803_EXT, RV8803_EXT_WADA);
if (err)
return err;
diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c
index 772d221ec..7163b91bb 100644
--- a/drivers/rtc/rtc-rx8010.c
+++ b/drivers/rtc/rtc-rx8010.c
@@ -272,15 +272,9 @@ static int rx8010_read_alarm(struct device *dev, struct rtc_wkalrm *t)
t->time.tm_min = bcd2bin(alarmvals[0] & 0x7f);
t->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
- if (alarmvals[2] & RX8010_ALARM_AE)
- t->time.tm_mday = -1;
- else
+ if (!(alarmvals[2] & RX8010_ALARM_AE))
t->time.tm_mday = bcd2bin(alarmvals[2] & 0x7f);
- t->time.tm_wday = -1;
- t->time.tm_mon = -1;
- t->time.tm_year = -1;
-
t->enabled = !!(rx8010->ctrlreg & RX8010_CTRL_AIE);
t->pending = (flagreg & RX8010_FLAG_AF) && t->enabled;
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index 9f105efbc..2b85cc7a2 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -319,11 +319,6 @@ static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t)
t->time.tm_hour = bcd2bin(ald[1] & 0x1f) % 12
+ (ald[1] & 0x20 ? 12 : 0);
- t->time.tm_wday = -1;
- t->time.tm_mday = -1;
- t->time.tm_mon = -1;
- t->time.tm_year = -1;
-
dev_dbg(dev, "%s: date: %ds %dm %dh %dmd %dm %dy\n",
__func__,
t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
index f40afdd0e..5dab4665c 100644
--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@@ -15,6 +15,7 @@
#include <linux/bitrev.h>
#include <linux/bcd.h>
#include <linux/slab.h>
+#include <linux/delay.h>
#define S35390A_CMD_STATUS1 0
#define S35390A_CMD_STATUS2 1
@@ -34,10 +35,14 @@
#define S35390A_ALRM_BYTE_HOURS 1
#define S35390A_ALRM_BYTE_MINS 2
+/* flags for STATUS1 */
#define S35390A_FLAG_POC 0x01
#define S35390A_FLAG_BLD 0x02
+#define S35390A_FLAG_INT2 0x04
#define S35390A_FLAG_24H 0x40
#define S35390A_FLAG_RESET 0x80
+
+/* flag for STATUS2 */
#define S35390A_FLAG_TEST 0x01
#define S35390A_INT2_MODE_MASK 0xF0
@@ -94,19 +99,63 @@ static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
return 0;
}
-static int s35390a_reset(struct s35390a *s35390a)
+/*
+ * Returns <0 on error, 0 if rtc is setup fine and 1 if the chip was reset.
+ * To keep the information if an irq is pending, pass the value read from
+ * STATUS1 to the caller.
+ */
+static int s35390a_reset(struct s35390a *s35390a, char *status1)
{
- char buf[1];
-
- if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)) < 0)
- return -EIO;
-
- if (!(buf[0] & (S35390A_FLAG_POC | S35390A_FLAG_BLD)))
+ char buf;
+ int ret;
+ unsigned initcount = 0;
+
+ ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, status1, 1);
+ if (ret < 0)
+ return ret;
+
+ if (*status1 & S35390A_FLAG_POC)
+ /*
+ * Do not communicate for 0.5 seconds since the power-on
+ * detection circuit is in operation.
+ */
+ msleep(500);
+ else if (!(*status1 & S35390A_FLAG_BLD))
+ /*
+ * If both POC and BLD are unset everything is fine.
+ */
return 0;
- buf[0] |= (S35390A_FLAG_RESET | S35390A_FLAG_24H);
- buf[0] &= 0xf0;
- return s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
+ /*
+ * At least one of POC and BLD are set, so reinitialise chip. Keeping
+ * this information in the hardware to know later that the time isn't
+ * valid is unfortunately not possible because POC and BLD are cleared
+ * on read. So the reset is best done now.
+ *
+ * The 24H bit is kept over reset, so set it already here.
+ */
+initialize:
+ *status1 = S35390A_FLAG_24H;
+ buf = S35390A_FLAG_RESET | S35390A_FLAG_24H;
+ ret = s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1);
+
+ if (ret < 0)
+ return ret;
+
+ ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1);
+ if (ret < 0)
+ return ret;
+
+ if (buf & (S35390A_FLAG_POC | S35390A_FLAG_BLD)) {
+ /* Try up to five times to reset the chip */
+ if (initcount < 5) {
+ ++initcount;
+ goto initialize;
+ } else
+ return -EIO;
+ }
+
+ return 1;
}
static int s35390a_disable_test_mode(struct s35390a *s35390a)
@@ -217,12 +266,12 @@ static int s35390a_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alm)
alm->time.tm_min, alm->time.tm_hour, alm->time.tm_mday,
alm->time.tm_mon, alm->time.tm_year, alm->time.tm_wday);
- /* disable interrupt */
+ /* disable interrupt (which deasserts the irq line) */
err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
if (err < 0)
return err;
- /* clear pending interrupt, if any */
+ /* clear pending interrupt (in STATUS1 only), if any */
err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &sts, sizeof(sts));
if (err < 0)
return err;
@@ -242,6 +291,8 @@ static int s35390a_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alm)
if (alm->time.tm_wday != -1)
buf[S35390A_ALRM_BYTE_WDAY] = bin2bcd(alm->time.tm_wday) | 0x80;
+ else
+ buf[S35390A_ALRM_BYTE_WDAY] = 0;
buf[S35390A_ALRM_BYTE_HOURS] = s35390a_hr2reg(s35390a,
alm->time.tm_hour) | 0x80;
@@ -269,23 +320,43 @@ static int s35390a_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alm)
if (err < 0)
return err;
- if (bitrev8(sts) != S35390A_INT2_MODE_ALARM)
- return -EINVAL;
+ if ((bitrev8(sts) & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
+ /*
+ * When the alarm isn't enabled, the register to configure
+ * the alarm time isn't accessible.
+ */
+ alm->enabled = 0;
+ return 0;
+ } else {
+ alm->enabled = 1;
+ }
err = s35390a_get_reg(s35390a, S35390A_CMD_INT2_REG1, buf, sizeof(buf));
if (err < 0)
return err;
/* This chip returns the bits of each byte in reverse order */
- for (i = 0; i < 3; ++i) {
+ for (i = 0; i < 3; ++i)
buf[i] = bitrev8(buf[i]);
- buf[i] &= ~0x80;
- }
- alm->time.tm_wday = bcd2bin(buf[S35390A_ALRM_BYTE_WDAY]);
- alm->time.tm_hour = s35390a_reg2hr(s35390a,
- buf[S35390A_ALRM_BYTE_HOURS]);
- alm->time.tm_min = bcd2bin(buf[S35390A_ALRM_BYTE_MINS]);
+ /*
+ * B0 of the three matching registers is an enable flag. Iff it is set
+ * the configured value is used for matching.
+ */
+ if (buf[S35390A_ALRM_BYTE_WDAY] & 0x80)
+ alm->time.tm_wday =
+ bcd2bin(buf[S35390A_ALRM_BYTE_WDAY] & ~0x80);
+
+ if (buf[S35390A_ALRM_BYTE_HOURS] & 0x80)
+ alm->time.tm_hour =
+ s35390a_reg2hr(s35390a,
+ buf[S35390A_ALRM_BYTE_HOURS] & ~0x80);
+
+ if (buf[S35390A_ALRM_BYTE_MINS] & 0x80)
+ alm->time.tm_min = bcd2bin(buf[S35390A_ALRM_BYTE_MINS] & ~0x80);
+
+ /* alarm triggers always at s=0 */
+ alm->time.tm_sec = 0;
dev_dbg(&client->dev, "%s: alm is mins=%d, hours=%d, wday=%d\n",
__func__, alm->time.tm_min, alm->time.tm_hour,
@@ -327,11 +398,11 @@ static struct i2c_driver s35390a_driver;
static int s35390a_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- int err;
+ int err, err_reset;
unsigned int i;
struct s35390a *s35390a;
struct rtc_time tm;
- char buf[1];
+ char buf, status1;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
err = -ENODEV;
@@ -360,29 +431,35 @@ static int s35390a_probe(struct i2c_client *client,
}
}
- err = s35390a_reset(s35390a);
- if (err < 0) {
+ err_reset = s35390a_reset(s35390a, &status1);
+ if (err_reset < 0) {
+ err = err_reset;
dev_err(&client->dev, "error resetting chip\n");
goto exit_dummy;
}
- err = s35390a_disable_test_mode(s35390a);
- if (err < 0) {
- dev_err(&client->dev, "error disabling test mode\n");
- goto exit_dummy;
- }
-
- err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
- if (err < 0) {
- dev_err(&client->dev, "error checking 12/24 hour mode\n");
- goto exit_dummy;
- }
- if (buf[0] & S35390A_FLAG_24H)
+ if (status1 & S35390A_FLAG_24H)
s35390a->twentyfourhour = 1;
else
s35390a->twentyfourhour = 0;
- if (s35390a_get_datetime(client, &tm) < 0)
+ if (status1 & S35390A_FLAG_INT2) {
+ /* disable alarm (and maybe test mode) */
+ buf = 0;
+ err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &buf, 1);
+ if (err < 0) {
+ dev_err(&client->dev, "error disabling alarm");
+ goto exit_dummy;
+ }
+ } else {
+ err = s35390a_disable_test_mode(s35390a);
+ if (err < 0) {
+ dev_err(&client->dev, "error disabling test mode\n");
+ goto exit_dummy;
+ }
+ }
+
+ if (err_reset > 0 || s35390a_get_datetime(client, &tm) < 0)
dev_warn(&client->dev, "clock needs to be set\n");
device_set_wakeup_capable(&client->dev, 1);
@@ -395,6 +472,10 @@ static int s35390a_probe(struct i2c_client *client,
err = PTR_ERR(s35390a->rtc);
goto exit_dummy;
}
+
+ if (status1 & S35390A_FLAG_INT2)
+ rtc_update_irq(s35390a->rtc, 1, RTC_AF);
+
return 0;
exit_dummy:
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 4e823c4b7..d44fb34df 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -266,35 +266,23 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
/* decode the alarm enable field */
if (alm_en & S3C2410_RTCALM_SECEN)
alm_tm->tm_sec = bcd2bin(alm_tm->tm_sec);
- else
- alm_tm->tm_sec = -1;
if (alm_en & S3C2410_RTCALM_MINEN)
alm_tm->tm_min = bcd2bin(alm_tm->tm_min);
- else
- alm_tm->tm_min = -1;
if (alm_en & S3C2410_RTCALM_HOUREN)
alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour);
- else
- alm_tm->tm_hour = -1;
if (alm_en & S3C2410_RTCALM_DAYEN)
alm_tm->tm_mday = bcd2bin(alm_tm->tm_mday);
- else
- alm_tm->tm_mday = -1;
if (alm_en & S3C2410_RTCALM_MONEN) {
alm_tm->tm_mon = bcd2bin(alm_tm->tm_mon);
alm_tm->tm_mon -= 1;
- } else {
- alm_tm->tm_mon = -1;
}
if (alm_en & S3C2410_RTCALM_YEAREN)
alm_tm->tm_year = bcd2bin(alm_tm->tm_year);
- else
- alm_tm->tm_year = -1;
return 0;
}
@@ -579,8 +567,6 @@ static int s3c_rtc_probe(struct platform_device *pdev)
s3c_rtc_setfreq(info, 1);
- s3c_rtc_disable_clk(info);
-
return 0;
err_nortc:
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index a45845a57..17b6235d6 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -481,7 +481,6 @@ static int sh_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
tm->tm_mon = sh_rtc_read_alarm_value(rtc, RMONAR);
if (tm->tm_mon > 0)
tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
- tm->tm_year = 0xffff;
wkalrm->enabled = (readb(rtc->regbase + RCR1) & RCR1_AIE) ? 1 : 0;
@@ -500,52 +499,13 @@ static inline void sh_rtc_write_alarm_value(struct sh_rtc *rtc,
writeb(bin2bcd(value) | AR_ENB, rtc->regbase + reg_off);
}
-static int sh_rtc_check_alarm(struct rtc_time *tm)
-{
- /*
- * The original rtc says anything > 0xc0 is "don't care" or "match
- * all" - most users use 0xff but rtc-dev uses -1 for the same thing.
- * The original rtc doesn't support years - some things use -1 and
- * some 0xffff. We use -1 to make out tests easier.
- */
- if (tm->tm_year == 0xffff)
- tm->tm_year = -1;
- if (tm->tm_mon >= 0xff)
- tm->tm_mon = -1;
- if (tm->tm_mday >= 0xff)
- tm->tm_mday = -1;
- if (tm->tm_wday >= 0xff)
- tm->tm_wday = -1;
- if (tm->tm_hour >= 0xff)
- tm->tm_hour = -1;
- if (tm->tm_min >= 0xff)
- tm->tm_min = -1;
- if (tm->tm_sec >= 0xff)
- tm->tm_sec = -1;
-
- if (tm->tm_year > 9999 ||
- tm->tm_mon >= 12 ||
- tm->tm_mday == 0 || tm->tm_mday >= 32 ||
- tm->tm_wday >= 7 ||
- tm->tm_hour >= 24 ||
- tm->tm_min >= 60 ||
- tm->tm_sec >= 60)
- return -EINVAL;
-
- return 0;
-}
-
static int sh_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
{
struct platform_device *pdev = to_platform_device(dev);
struct sh_rtc *rtc = platform_get_drvdata(pdev);
unsigned int rcr1;
struct rtc_time *tm = &wkalrm->time;
- int mon, err;
-
- err = sh_rtc_check_alarm(tm);
- if (unlikely(err < 0))
- return err;
+ int mon;
spin_lock_irq(&rtc->lock);
diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c
index 60232bd36..15ac597d5 100644
--- a/drivers/rtc/rtc-tegra.c
+++ b/drivers/rtc/rtc-tegra.c
@@ -179,12 +179,6 @@ static int tegra_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
if (sec == 0) {
/* alarm is disabled. */
alarm->enabled = 0;
- alarm->time.tm_mon = -1;
- alarm->time.tm_mday = -1;
- alarm->time.tm_year = -1;
- alarm->time.tm_hour = -1;
- alarm->time.tm_min = -1;
- alarm->time.tm_sec = -1;
} else {
/* alarm is enabled. */
alarm->enabled = 1;
diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c
index 7a0436329..1f3117b5a 100644
--- a/drivers/rtc/rtc-v3020.c
+++ b/drivers/rtc/rtc-v3020.c
@@ -25,7 +25,7 @@
#include <linux/rtc.h>
#include <linux/types.h>
#include <linux/bcd.h>
-#include <linux/rtc-v3020.h>
+#include <linux/platform_data/rtc-v3020.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/slab.h>