diff options
Diffstat (limited to 'drivers/s390/crypto/zcrypt_pcica.c')
| -rw-r--r-- | drivers/s390/crypto/zcrypt_pcica.c | 420 |
1 files changed, 420 insertions, 0 deletions
diff --git a/drivers/s390/crypto/zcrypt_pcica.c b/drivers/s390/crypto/zcrypt_pcica.c new file mode 100644 index 000000000..7a743f4c6 --- /dev/null +++ b/drivers/s390/crypto/zcrypt_pcica.c @@ -0,0 +1,420 @@ +/* + * zcrypt 2.1.0 + * + * Copyright IBM Corp. 2001, 2006 + * Author(s): Robert Burroughs + * Eric Rossman (edrossma@us.ibm.com) + * + * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) + * Major cleanup & driver split: Martin Schwidefsky <schwidefsky@de.ibm.com> + * Ralph Wuerthner <rwuerthn@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define KMSG_COMPONENT "zcrypt" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/atomic.h> +#include <asm/uaccess.h> + +#include "ap_bus.h" +#include "zcrypt_api.h" +#include "zcrypt_error.h" +#include "zcrypt_pcica.h" + +#define PCICA_MIN_MOD_SIZE 1 /* 8 bits */ +#define PCICA_MAX_MOD_SIZE 256 /* 2048 bits */ + +#define PCICA_SPEED_RATING 2800 + +#define PCICA_MAX_MESSAGE_SIZE 0x3a0 /* sizeof(struct type4_lcr) */ +#define PCICA_MAX_RESPONSE_SIZE 0x110 /* max outputdatalength + type80_hdr */ + +#define PCICA_CLEANUP_TIME (15*HZ) + +static struct ap_device_id zcrypt_pcica_ids[] = { + { AP_DEVICE(AP_DEVICE_TYPE_PCICA) }, + { /* end of list */ }, +}; + +MODULE_DEVICE_TABLE(ap, zcrypt_pcica_ids); +MODULE_AUTHOR("IBM Corporation"); +MODULE_DESCRIPTION("PCICA Cryptographic Coprocessor device driver, " + "Copyright IBM Corp. 2001, 2006"); +MODULE_LICENSE("GPL"); + +static int zcrypt_pcica_probe(struct ap_device *ap_dev); +static void zcrypt_pcica_remove(struct ap_device *ap_dev); +static void zcrypt_pcica_receive(struct ap_device *, struct ap_message *, + struct ap_message *); + +static struct ap_driver zcrypt_pcica_driver = { + .probe = zcrypt_pcica_probe, + .remove = zcrypt_pcica_remove, + .ids = zcrypt_pcica_ids, + .request_timeout = PCICA_CLEANUP_TIME, +}; + +/** + * Convert a ICAMEX message to a type4 MEX message. + * + * @zdev: crypto device pointer + * @zreq: crypto request pointer + * @mex: pointer to user input data + * + * Returns 0 on success or -EFAULT. + */ +static int ICAMEX_msg_to_type4MEX_msg(struct zcrypt_device *zdev, + struct ap_message *ap_msg, + struct ica_rsa_modexpo *mex) +{ + unsigned char *modulus, *exponent, *message; + int mod_len; + + mod_len = mex->inputdatalength; + + if (mod_len <= 128) { + struct type4_sme *sme = ap_msg->message; + memset(sme, 0, sizeof(*sme)); + ap_msg->length = sizeof(*sme); + sme->header.msg_fmt = TYPE4_SME_FMT; + sme->header.msg_len = sizeof(*sme); + sme->header.msg_type_code = TYPE4_TYPE_CODE; + sme->header.request_code = TYPE4_REQU_CODE; + modulus = sme->modulus + sizeof(sme->modulus) - mod_len; + exponent = sme->exponent + sizeof(sme->exponent) - mod_len; + message = sme->message + sizeof(sme->message) - mod_len; + } else { + struct type4_lme *lme = ap_msg->message; + memset(lme, 0, sizeof(*lme)); + ap_msg->length = sizeof(*lme); + lme->header.msg_fmt = TYPE4_LME_FMT; + lme->header.msg_len = sizeof(*lme); + lme->header.msg_type_code = TYPE4_TYPE_CODE; + lme->header.request_code = TYPE4_REQU_CODE; + modulus = lme->modulus + sizeof(lme->modulus) - mod_len; + exponent = lme->exponent + sizeof(lme->exponent) - mod_len; + message = lme->message + sizeof(lme->message) - mod_len; + } + + if (copy_from_user(modulus, mex->n_modulus, mod_len) || + copy_from_user(exponent, mex->b_key, mod_len) || + copy_from_user(message, mex->inputdata, mod_len)) + return -EFAULT; + return 0; +} + +/** + * Convert a ICACRT message to a type4 CRT message. + * + * @zdev: crypto device pointer + * @zreq: crypto request pointer + * @crt: pointer to user input data + * + * Returns 0 on success or -EFAULT. + */ +static int ICACRT_msg_to_type4CRT_msg(struct zcrypt_device *zdev, + struct ap_message *ap_msg, + struct ica_rsa_modexpo_crt *crt) +{ + unsigned char *p, *q, *dp, *dq, *u, *inp; + int mod_len, short_len, long_len; + + mod_len = crt->inputdatalength; + short_len = mod_len / 2; + long_len = mod_len / 2 + 8; + + if (mod_len <= 128) { + struct type4_scr *scr = ap_msg->message; + memset(scr, 0, sizeof(*scr)); + ap_msg->length = sizeof(*scr); + scr->header.msg_type_code = TYPE4_TYPE_CODE; + scr->header.request_code = TYPE4_REQU_CODE; + scr->header.msg_fmt = TYPE4_SCR_FMT; + scr->header.msg_len = sizeof(*scr); + p = scr->p + sizeof(scr->p) - long_len; + q = scr->q + sizeof(scr->q) - short_len; + dp = scr->dp + sizeof(scr->dp) - long_len; + dq = scr->dq + sizeof(scr->dq) - short_len; + u = scr->u + sizeof(scr->u) - long_len; + inp = scr->message + sizeof(scr->message) - mod_len; + } else { + struct type4_lcr *lcr = ap_msg->message; + memset(lcr, 0, sizeof(*lcr)); + ap_msg->length = sizeof(*lcr); + lcr->header.msg_type_code = TYPE4_TYPE_CODE; + lcr->header.request_code = TYPE4_REQU_CODE; + lcr->header.msg_fmt = TYPE4_LCR_FMT; + lcr->header.msg_len = sizeof(*lcr); + p = lcr->p + sizeof(lcr->p) - long_len; + q = lcr->q + sizeof(lcr->q) - short_len; + dp = lcr->dp + sizeof(lcr->dp) - long_len; + dq = lcr->dq + sizeof(lcr->dq) - short_len; + u = lcr->u + sizeof(lcr->u) - long_len; + inp = lcr->message + sizeof(lcr->message) - mod_len; + } + + if (copy_from_user(p, crt->np_prime, long_len) || + copy_from_user(q, crt->nq_prime, short_len) || + copy_from_user(dp, crt->bp_key, long_len) || + copy_from_user(dq, crt->bq_key, short_len) || + copy_from_user(u, crt->u_mult_inv, long_len) || + copy_from_user(inp, crt->inputdata, mod_len)) + return -EFAULT; + return 0; +} + +/** + * Copy results from a type 84 reply message back to user space. + * + * @zdev: crypto device pointer + * @reply: reply AP message. + * @data: pointer to user output data + * @length: size of user output data + * + * Returns 0 on success or -EFAULT. + */ +static int convert_type84(struct zcrypt_device *zdev, + struct ap_message *reply, + char __user *outputdata, + unsigned int outputdatalength) +{ + struct type84_hdr *t84h = reply->message; + char *data; + + if (t84h->len < sizeof(*t84h) + outputdatalength) { + /* The result is too short, the PCICA card may not do that.. */ + zdev->online = 0; + pr_err("Cryptographic device %x failed and was set offline\n", + zdev->ap_dev->qid); + ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d", + zdev->ap_dev->qid, zdev->online, t84h->code); + return -EAGAIN; /* repeat the request on a different device. */ + } + BUG_ON(t84h->len > PCICA_MAX_RESPONSE_SIZE); + data = reply->message + t84h->len - outputdatalength; + if (copy_to_user(outputdata, data, outputdatalength)) + return -EFAULT; + return 0; +} + +static int convert_response(struct zcrypt_device *zdev, + struct ap_message *reply, + char __user *outputdata, + unsigned int outputdatalength) +{ + /* Response type byte is the second byte in the response. */ + switch (((unsigned char *) reply->message)[1]) { + case TYPE82_RSP_CODE: + case TYPE88_RSP_CODE: + return convert_error(zdev, reply); + case TYPE84_RSP_CODE: + return convert_type84(zdev, reply, + outputdata, outputdatalength); + default: /* Unknown response type, this should NEVER EVER happen */ + zdev->online = 0; + pr_err("Cryptographic device %x failed and was set offline\n", + zdev->ap_dev->qid); + ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail", + zdev->ap_dev->qid, zdev->online); + return -EAGAIN; /* repeat the request on a different device. */ + } +} + +/** + * This function is called from the AP bus code after a crypto request + * "msg" has finished with the reply message "reply". + * It is called from tasklet context. + * @ap_dev: pointer to the AP device + * @msg: pointer to the AP message + * @reply: pointer to the AP reply message + */ +static void zcrypt_pcica_receive(struct ap_device *ap_dev, + struct ap_message *msg, + struct ap_message *reply) +{ + static struct error_hdr error_reply = { + .type = TYPE82_RSP_CODE, + .reply_code = REP82_ERROR_MACHINE_FAILURE, + }; + struct type84_hdr *t84h; + int length; + + /* Copy the reply message to the request message buffer. */ + if (IS_ERR(reply)) { + memcpy(msg->message, &error_reply, sizeof(error_reply)); + goto out; + } + t84h = reply->message; + if (t84h->code == TYPE84_RSP_CODE) { + length = min(PCICA_MAX_RESPONSE_SIZE, (int) t84h->len); + memcpy(msg->message, reply->message, length); + } else + memcpy(msg->message, reply->message, sizeof error_reply); +out: + complete((struct completion *) msg->private); +} + +static atomic_t zcrypt_step = ATOMIC_INIT(0); + +/** + * The request distributor calls this function if it picked the PCICA + * device to handle a modexpo request. + * @zdev: pointer to zcrypt_device structure that identifies the + * PCICA device to the request distributor + * @mex: pointer to the modexpo request buffer + */ +static long zcrypt_pcica_modexpo(struct zcrypt_device *zdev, + struct ica_rsa_modexpo *mex) +{ + struct ap_message ap_msg; + struct completion work; + int rc; + + ap_init_message(&ap_msg); + ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL); + if (!ap_msg.message) + return -ENOMEM; + ap_msg.receive = zcrypt_pcica_receive; + ap_msg.psmid = (((unsigned long long) current->pid) << 32) + + atomic_inc_return(&zcrypt_step); + ap_msg.private = &work; + rc = ICAMEX_msg_to_type4MEX_msg(zdev, &ap_msg, mex); + if (rc) + goto out_free; + init_completion(&work); + ap_queue_message(zdev->ap_dev, &ap_msg); + rc = wait_for_completion_interruptible(&work); + if (rc == 0) + rc = convert_response(zdev, &ap_msg, mex->outputdata, + mex->outputdatalength); + else + /* Signal pending. */ + ap_cancel_message(zdev->ap_dev, &ap_msg); +out_free: + kfree(ap_msg.message); + return rc; +} + +/** + * The request distributor calls this function if it picked the PCICA + * device to handle a modexpo_crt request. + * @zdev: pointer to zcrypt_device structure that identifies the + * PCICA device to the request distributor + * @crt: pointer to the modexpoc_crt request buffer + */ +static long zcrypt_pcica_modexpo_crt(struct zcrypt_device *zdev, + struct ica_rsa_modexpo_crt *crt) +{ + struct ap_message ap_msg; + struct completion work; + int rc; + + ap_init_message(&ap_msg); + ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL); + if (!ap_msg.message) + return -ENOMEM; + ap_msg.receive = zcrypt_pcica_receive; + ap_msg.psmid = (((unsigned long long) current->pid) << 32) + + atomic_inc_return(&zcrypt_step); + ap_msg.private = &work; + rc = ICACRT_msg_to_type4CRT_msg(zdev, &ap_msg, crt); + if (rc) + goto out_free; + init_completion(&work); + ap_queue_message(zdev->ap_dev, &ap_msg); + rc = wait_for_completion_interruptible(&work); + if (rc == 0) + rc = convert_response(zdev, &ap_msg, crt->outputdata, + crt->outputdatalength); + else + /* Signal pending. */ + ap_cancel_message(zdev->ap_dev, &ap_msg); +out_free: + kfree(ap_msg.message); + return rc; +} + +/** + * The crypto operations for a PCICA card. + */ +static struct zcrypt_ops zcrypt_pcica_ops = { + .rsa_modexpo = zcrypt_pcica_modexpo, + .rsa_modexpo_crt = zcrypt_pcica_modexpo_crt, +}; + +/** + * Probe function for PCICA cards. It always accepts the AP device + * since the bus_match already checked the hardware type. + * @ap_dev: pointer to the AP device. + */ +static int zcrypt_pcica_probe(struct ap_device *ap_dev) +{ + struct zcrypt_device *zdev; + int rc; + + zdev = zcrypt_device_alloc(PCICA_MAX_RESPONSE_SIZE); + if (!zdev) + return -ENOMEM; + zdev->ap_dev = ap_dev; + zdev->ops = &zcrypt_pcica_ops; + zdev->online = 1; + zdev->user_space_type = ZCRYPT_PCICA; + zdev->type_string = "PCICA"; + zdev->min_mod_size = PCICA_MIN_MOD_SIZE; + zdev->max_mod_size = PCICA_MAX_MOD_SIZE; + zdev->speed_rating = PCICA_SPEED_RATING; + zdev->max_exp_bit_length = PCICA_MAX_MOD_SIZE; + ap_dev->reply = &zdev->reply; + ap_dev->private = zdev; + rc = zcrypt_device_register(zdev); + if (rc) + goto out_free; + return 0; + +out_free: + ap_dev->private = NULL; + zcrypt_device_free(zdev); + return rc; +} + +/** + * This is called to remove the extended PCICA driver information + * if an AP device is removed. + */ +static void zcrypt_pcica_remove(struct ap_device *ap_dev) +{ + struct zcrypt_device *zdev = ap_dev->private; + + zcrypt_device_unregister(zdev); +} + +int __init zcrypt_pcica_init(void) +{ + return ap_driver_register(&zcrypt_pcica_driver, THIS_MODULE, "pcica"); +} + +void zcrypt_pcica_exit(void) +{ + ap_driver_unregister(&zcrypt_pcica_driver); +} + +module_init(zcrypt_pcica_init); +module_exit(zcrypt_pcica_exit); |