diff options
Diffstat (limited to 'drivers/s390/crypto/zcrypt_pcica.c')
| -rw-r--r-- | drivers/s390/crypto/zcrypt_pcica.c | 420 |
1 files changed, 0 insertions, 420 deletions
diff --git a/drivers/s390/crypto/zcrypt_pcica.c b/drivers/s390/crypto/zcrypt_pcica.c deleted file mode 100644 index 7a743f4c6..000000000 --- a/drivers/s390/crypto/zcrypt_pcica.c +++ /dev/null @@ -1,420 +0,0 @@ -/* - * zcrypt 2.1.0 - * - * Copyright IBM Corp. 2001, 2006 - * Author(s): Robert Burroughs - * Eric Rossman (edrossma@us.ibm.com) - * - * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) - * Major cleanup & driver split: Martin Schwidefsky <schwidefsky@de.ibm.com> - * Ralph Wuerthner <rwuerthn@de.ibm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#define KMSG_COMPONENT "zcrypt" -#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/atomic.h> -#include <asm/uaccess.h> - -#include "ap_bus.h" -#include "zcrypt_api.h" -#include "zcrypt_error.h" -#include "zcrypt_pcica.h" - -#define PCICA_MIN_MOD_SIZE 1 /* 8 bits */ -#define PCICA_MAX_MOD_SIZE 256 /* 2048 bits */ - -#define PCICA_SPEED_RATING 2800 - -#define PCICA_MAX_MESSAGE_SIZE 0x3a0 /* sizeof(struct type4_lcr) */ -#define PCICA_MAX_RESPONSE_SIZE 0x110 /* max outputdatalength + type80_hdr */ - -#define PCICA_CLEANUP_TIME (15*HZ) - -static struct ap_device_id zcrypt_pcica_ids[] = { - { AP_DEVICE(AP_DEVICE_TYPE_PCICA) }, - { /* end of list */ }, -}; - -MODULE_DEVICE_TABLE(ap, zcrypt_pcica_ids); -MODULE_AUTHOR("IBM Corporation"); -MODULE_DESCRIPTION("PCICA Cryptographic Coprocessor device driver, " - "Copyright IBM Corp. 2001, 2006"); -MODULE_LICENSE("GPL"); - -static int zcrypt_pcica_probe(struct ap_device *ap_dev); -static void zcrypt_pcica_remove(struct ap_device *ap_dev); -static void zcrypt_pcica_receive(struct ap_device *, struct ap_message *, - struct ap_message *); - -static struct ap_driver zcrypt_pcica_driver = { - .probe = zcrypt_pcica_probe, - .remove = zcrypt_pcica_remove, - .ids = zcrypt_pcica_ids, - .request_timeout = PCICA_CLEANUP_TIME, -}; - -/** - * Convert a ICAMEX message to a type4 MEX message. - * - * @zdev: crypto device pointer - * @zreq: crypto request pointer - * @mex: pointer to user input data - * - * Returns 0 on success or -EFAULT. - */ -static int ICAMEX_msg_to_type4MEX_msg(struct zcrypt_device *zdev, - struct ap_message *ap_msg, - struct ica_rsa_modexpo *mex) -{ - unsigned char *modulus, *exponent, *message; - int mod_len; - - mod_len = mex->inputdatalength; - - if (mod_len <= 128) { - struct type4_sme *sme = ap_msg->message; - memset(sme, 0, sizeof(*sme)); - ap_msg->length = sizeof(*sme); - sme->header.msg_fmt = TYPE4_SME_FMT; - sme->header.msg_len = sizeof(*sme); - sme->header.msg_type_code = TYPE4_TYPE_CODE; - sme->header.request_code = TYPE4_REQU_CODE; - modulus = sme->modulus + sizeof(sme->modulus) - mod_len; - exponent = sme->exponent + sizeof(sme->exponent) - mod_len; - message = sme->message + sizeof(sme->message) - mod_len; - } else { - struct type4_lme *lme = ap_msg->message; - memset(lme, 0, sizeof(*lme)); - ap_msg->length = sizeof(*lme); - lme->header.msg_fmt = TYPE4_LME_FMT; - lme->header.msg_len = sizeof(*lme); - lme->header.msg_type_code = TYPE4_TYPE_CODE; - lme->header.request_code = TYPE4_REQU_CODE; - modulus = lme->modulus + sizeof(lme->modulus) - mod_len; - exponent = lme->exponent + sizeof(lme->exponent) - mod_len; - message = lme->message + sizeof(lme->message) - mod_len; - } - - if (copy_from_user(modulus, mex->n_modulus, mod_len) || - copy_from_user(exponent, mex->b_key, mod_len) || - copy_from_user(message, mex->inputdata, mod_len)) - return -EFAULT; - return 0; -} - -/** - * Convert a ICACRT message to a type4 CRT message. - * - * @zdev: crypto device pointer - * @zreq: crypto request pointer - * @crt: pointer to user input data - * - * Returns 0 on success or -EFAULT. - */ -static int ICACRT_msg_to_type4CRT_msg(struct zcrypt_device *zdev, - struct ap_message *ap_msg, - struct ica_rsa_modexpo_crt *crt) -{ - unsigned char *p, *q, *dp, *dq, *u, *inp; - int mod_len, short_len, long_len; - - mod_len = crt->inputdatalength; - short_len = mod_len / 2; - long_len = mod_len / 2 + 8; - - if (mod_len <= 128) { - struct type4_scr *scr = ap_msg->message; - memset(scr, 0, sizeof(*scr)); - ap_msg->length = sizeof(*scr); - scr->header.msg_type_code = TYPE4_TYPE_CODE; - scr->header.request_code = TYPE4_REQU_CODE; - scr->header.msg_fmt = TYPE4_SCR_FMT; - scr->header.msg_len = sizeof(*scr); - p = scr->p + sizeof(scr->p) - long_len; - q = scr->q + sizeof(scr->q) - short_len; - dp = scr->dp + sizeof(scr->dp) - long_len; - dq = scr->dq + sizeof(scr->dq) - short_len; - u = scr->u + sizeof(scr->u) - long_len; - inp = scr->message + sizeof(scr->message) - mod_len; - } else { - struct type4_lcr *lcr = ap_msg->message; - memset(lcr, 0, sizeof(*lcr)); - ap_msg->length = sizeof(*lcr); - lcr->header.msg_type_code = TYPE4_TYPE_CODE; - lcr->header.request_code = TYPE4_REQU_CODE; - lcr->header.msg_fmt = TYPE4_LCR_FMT; - lcr->header.msg_len = sizeof(*lcr); - p = lcr->p + sizeof(lcr->p) - long_len; - q = lcr->q + sizeof(lcr->q) - short_len; - dp = lcr->dp + sizeof(lcr->dp) - long_len; - dq = lcr->dq + sizeof(lcr->dq) - short_len; - u = lcr->u + sizeof(lcr->u) - long_len; - inp = lcr->message + sizeof(lcr->message) - mod_len; - } - - if (copy_from_user(p, crt->np_prime, long_len) || - copy_from_user(q, crt->nq_prime, short_len) || - copy_from_user(dp, crt->bp_key, long_len) || - copy_from_user(dq, crt->bq_key, short_len) || - copy_from_user(u, crt->u_mult_inv, long_len) || - copy_from_user(inp, crt->inputdata, mod_len)) - return -EFAULT; - return 0; -} - -/** - * Copy results from a type 84 reply message back to user space. - * - * @zdev: crypto device pointer - * @reply: reply AP message. - * @data: pointer to user output data - * @length: size of user output data - * - * Returns 0 on success or -EFAULT. - */ -static int convert_type84(struct zcrypt_device *zdev, - struct ap_message *reply, - char __user *outputdata, - unsigned int outputdatalength) -{ - struct type84_hdr *t84h = reply->message; - char *data; - - if (t84h->len < sizeof(*t84h) + outputdatalength) { - /* The result is too short, the PCICA card may not do that.. */ - zdev->online = 0; - pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); - ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d", - zdev->ap_dev->qid, zdev->online, t84h->code); - return -EAGAIN; /* repeat the request on a different device. */ - } - BUG_ON(t84h->len > PCICA_MAX_RESPONSE_SIZE); - data = reply->message + t84h->len - outputdatalength; - if (copy_to_user(outputdata, data, outputdatalength)) - return -EFAULT; - return 0; -} - -static int convert_response(struct zcrypt_device *zdev, - struct ap_message *reply, - char __user *outputdata, - unsigned int outputdatalength) -{ - /* Response type byte is the second byte in the response. */ - switch (((unsigned char *) reply->message)[1]) { - case TYPE82_RSP_CODE: - case TYPE88_RSP_CODE: - return convert_error(zdev, reply); - case TYPE84_RSP_CODE: - return convert_type84(zdev, reply, - outputdata, outputdatalength); - default: /* Unknown response type, this should NEVER EVER happen */ - zdev->online = 0; - pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); - ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail", - zdev->ap_dev->qid, zdev->online); - return -EAGAIN; /* repeat the request on a different device. */ - } -} - -/** - * This function is called from the AP bus code after a crypto request - * "msg" has finished with the reply message "reply". - * It is called from tasklet context. - * @ap_dev: pointer to the AP device - * @msg: pointer to the AP message - * @reply: pointer to the AP reply message - */ -static void zcrypt_pcica_receive(struct ap_device *ap_dev, - struct ap_message *msg, - struct ap_message *reply) -{ - static struct error_hdr error_reply = { - .type = TYPE82_RSP_CODE, - .reply_code = REP82_ERROR_MACHINE_FAILURE, - }; - struct type84_hdr *t84h; - int length; - - /* Copy the reply message to the request message buffer. */ - if (IS_ERR(reply)) { - memcpy(msg->message, &error_reply, sizeof(error_reply)); - goto out; - } - t84h = reply->message; - if (t84h->code == TYPE84_RSP_CODE) { - length = min(PCICA_MAX_RESPONSE_SIZE, (int) t84h->len); - memcpy(msg->message, reply->message, length); - } else - memcpy(msg->message, reply->message, sizeof error_reply); -out: - complete((struct completion *) msg->private); -} - -static atomic_t zcrypt_step = ATOMIC_INIT(0); - -/** - * The request distributor calls this function if it picked the PCICA - * device to handle a modexpo request. - * @zdev: pointer to zcrypt_device structure that identifies the - * PCICA device to the request distributor - * @mex: pointer to the modexpo request buffer - */ -static long zcrypt_pcica_modexpo(struct zcrypt_device *zdev, - struct ica_rsa_modexpo *mex) -{ - struct ap_message ap_msg; - struct completion work; - int rc; - - ap_init_message(&ap_msg); - ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL); - if (!ap_msg.message) - return -ENOMEM; - ap_msg.receive = zcrypt_pcica_receive; - ap_msg.psmid = (((unsigned long long) current->pid) << 32) + - atomic_inc_return(&zcrypt_step); - ap_msg.private = &work; - rc = ICAMEX_msg_to_type4MEX_msg(zdev, &ap_msg, mex); - if (rc) - goto out_free; - init_completion(&work); - ap_queue_message(zdev->ap_dev, &ap_msg); - rc = wait_for_completion_interruptible(&work); - if (rc == 0) - rc = convert_response(zdev, &ap_msg, mex->outputdata, - mex->outputdatalength); - else - /* Signal pending. */ - ap_cancel_message(zdev->ap_dev, &ap_msg); -out_free: - kfree(ap_msg.message); - return rc; -} - -/** - * The request distributor calls this function if it picked the PCICA - * device to handle a modexpo_crt request. - * @zdev: pointer to zcrypt_device structure that identifies the - * PCICA device to the request distributor - * @crt: pointer to the modexpoc_crt request buffer - */ -static long zcrypt_pcica_modexpo_crt(struct zcrypt_device *zdev, - struct ica_rsa_modexpo_crt *crt) -{ - struct ap_message ap_msg; - struct completion work; - int rc; - - ap_init_message(&ap_msg); - ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL); - if (!ap_msg.message) - return -ENOMEM; - ap_msg.receive = zcrypt_pcica_receive; - ap_msg.psmid = (((unsigned long long) current->pid) << 32) + - atomic_inc_return(&zcrypt_step); - ap_msg.private = &work; - rc = ICACRT_msg_to_type4CRT_msg(zdev, &ap_msg, crt); - if (rc) - goto out_free; - init_completion(&work); - ap_queue_message(zdev->ap_dev, &ap_msg); - rc = wait_for_completion_interruptible(&work); - if (rc == 0) - rc = convert_response(zdev, &ap_msg, crt->outputdata, - crt->outputdatalength); - else - /* Signal pending. */ - ap_cancel_message(zdev->ap_dev, &ap_msg); -out_free: - kfree(ap_msg.message); - return rc; -} - -/** - * The crypto operations for a PCICA card. - */ -static struct zcrypt_ops zcrypt_pcica_ops = { - .rsa_modexpo = zcrypt_pcica_modexpo, - .rsa_modexpo_crt = zcrypt_pcica_modexpo_crt, -}; - -/** - * Probe function for PCICA cards. It always accepts the AP device - * since the bus_match already checked the hardware type. - * @ap_dev: pointer to the AP device. - */ -static int zcrypt_pcica_probe(struct ap_device *ap_dev) -{ - struct zcrypt_device *zdev; - int rc; - - zdev = zcrypt_device_alloc(PCICA_MAX_RESPONSE_SIZE); - if (!zdev) - return -ENOMEM; - zdev->ap_dev = ap_dev; - zdev->ops = &zcrypt_pcica_ops; - zdev->online = 1; - zdev->user_space_type = ZCRYPT_PCICA; - zdev->type_string = "PCICA"; - zdev->min_mod_size = PCICA_MIN_MOD_SIZE; - zdev->max_mod_size = PCICA_MAX_MOD_SIZE; - zdev->speed_rating = PCICA_SPEED_RATING; - zdev->max_exp_bit_length = PCICA_MAX_MOD_SIZE; - ap_dev->reply = &zdev->reply; - ap_dev->private = zdev; - rc = zcrypt_device_register(zdev); - if (rc) - goto out_free; - return 0; - -out_free: - ap_dev->private = NULL; - zcrypt_device_free(zdev); - return rc; -} - -/** - * This is called to remove the extended PCICA driver information - * if an AP device is removed. - */ -static void zcrypt_pcica_remove(struct ap_device *ap_dev) -{ - struct zcrypt_device *zdev = ap_dev->private; - - zcrypt_device_unregister(zdev); -} - -int __init zcrypt_pcica_init(void) -{ - return ap_driver_register(&zcrypt_pcica_driver, THIS_MODULE, "pcica"); -} - -void zcrypt_pcica_exit(void) -{ - ap_driver_unregister(&zcrypt_pcica_driver); -} - -module_init(zcrypt_pcica_init); -module_exit(zcrypt_pcica_exit); |