diff options
Diffstat (limited to 'drivers/scsi/53c700.h')
| -rw-r--r-- | drivers/scsi/53c700.h | 524 |
1 files changed, 524 insertions, 0 deletions
diff --git a/drivers/scsi/53c700.h b/drivers/scsi/53c700.h new file mode 100644 index 000000000..e06bdfeab --- /dev/null +++ b/drivers/scsi/53c700.h @@ -0,0 +1,524 @@ +/* -*- mode: c; c-basic-offset: 8 -*- */ + +/* Driver for 53c700 and 53c700-66 chips from NCR and Symbios + * + * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com + */ + +#ifndef _53C700_H +#define _53C700_H + +#include <linux/interrupt.h> +#include <asm/io.h> + +#include <scsi/scsi_device.h> +#include <scsi/scsi_cmnd.h> + +/* Turn on for general debugging---too verbose for normal use */ +#undef NCR_700_DEBUG +/* Debug the tag queues, checking hash queue allocation and deallocation + * and search for duplicate tags */ +#undef NCR_700_TAG_DEBUG + +#ifdef NCR_700_DEBUG +#define DEBUG(x) printk x +#define DDEBUG(prefix, sdev, fmt, a...) \ + sdev_printk(prefix, sdev, fmt, ##a) +#define CDEBUG(prefix, scmd, fmt, a...) \ + scmd_printk(prefix, scmd, fmt, ##a) +#else +#define DEBUG(x) do {} while (0) +#define DDEBUG(prefix, scmd, fmt, a...) do {} while (0) +#define CDEBUG(prefix, scmd, fmt, a...) do {} while (0) +#endif + +/* The number of available command slots */ +#define NCR_700_COMMAND_SLOTS_PER_HOST 64 +/* The maximum number of Scatter Gathers we allow */ +#define NCR_700_SG_SEGMENTS 32 +/* The maximum number of luns (make this of the form 2^n) */ +#define NCR_700_MAX_LUNS 32 +#define NCR_700_LUN_MASK (NCR_700_MAX_LUNS - 1) +/* Maximum number of tags the driver ever allows per device */ +#define NCR_700_MAX_TAGS 16 +/* Tag depth the driver starts out with (can be altered in sysfs) */ +#define NCR_700_DEFAULT_TAGS 4 +/* This is the default number of commands per LUN in the untagged case. + * two is a good value because it means we can have one command active and + * one command fully prepared and waiting + */ +#define NCR_700_CMD_PER_LUN 2 +/* magic byte identifying an internally generated REQUEST_SENSE command */ +#define NCR_700_INTERNAL_SENSE_MAGIC 0x42 + +struct NCR_700_Host_Parameters; + +/* These are the externally used routines */ +struct Scsi_Host *NCR_700_detect(struct scsi_host_template *, + struct NCR_700_Host_Parameters *, struct device *); +int NCR_700_release(struct Scsi_Host *host); +irqreturn_t NCR_700_intr(int, void *); + + +enum NCR_700_Host_State { + NCR_700_HOST_BUSY, + NCR_700_HOST_FREE, +}; + +struct NCR_700_SG_List { + /* The following is a script fragment to move the buffer onto the + * bus and then link the next fragment or return */ + #define SCRIPT_MOVE_DATA_IN 0x09000000 + #define SCRIPT_MOVE_DATA_OUT 0x08000000 + __u32 ins; + __u32 pAddr; + #define SCRIPT_NOP 0x80000000 + #define SCRIPT_RETURN 0x90080000 +}; + +struct NCR_700_Device_Parameters { + /* space for creating a request sense command. Really, except + * for the annoying SCSI-2 requirement for LUN information in + * cmnd[1], this could be in static storage */ + unsigned char cmnd[MAX_COMMAND_SIZE]; + __u8 depth; +}; + + +/* The SYNC negotiation sequence looks like: + * + * If DEV_NEGOTIATED_SYNC not set, tack and SDTR message on to the + * initial identify for the device and set DEV_BEGIN_SYNC_NEGOTATION + * If we get an SDTR reply, work out the SXFER parameters, squirrel + * them away here, clear DEV_BEGIN_SYNC_NEGOTIATION and set + * DEV_NEGOTIATED_SYNC. If we get a REJECT msg, squirrel + * + * + * 0:7 SXFER_REG negotiated value for this device + * 8:15 Current queue depth + * 16 negotiated SYNC flag + * 17 begin SYNC negotiation flag + * 18 device supports tag queueing */ +#define NCR_700_DEV_NEGOTIATED_SYNC (1<<16) +#define NCR_700_DEV_BEGIN_SYNC_NEGOTIATION (1<<17) +#define NCR_700_DEV_PRINT_SYNC_NEGOTIATION (1<<19) + +static inline char *NCR_700_get_sense_cmnd(struct scsi_device *SDp) +{ + struct NCR_700_Device_Parameters *hostdata = SDp->hostdata; + + return hostdata->cmnd; +} + +static inline void +NCR_700_set_depth(struct scsi_device *SDp, __u8 depth) +{ + struct NCR_700_Device_Parameters *hostdata = SDp->hostdata; + + hostdata->depth = depth; +} +static inline __u8 +NCR_700_get_depth(struct scsi_device *SDp) +{ + struct NCR_700_Device_Parameters *hostdata = SDp->hostdata; + + return hostdata->depth; +} +static inline int +NCR_700_is_flag_set(struct scsi_device *SDp, __u32 flag) +{ + return (spi_flags(SDp->sdev_target) & flag) == flag; +} +static inline int +NCR_700_is_flag_clear(struct scsi_device *SDp, __u32 flag) +{ + return (spi_flags(SDp->sdev_target) & flag) == 0; +} +static inline void +NCR_700_set_flag(struct scsi_device *SDp, __u32 flag) +{ + spi_flags(SDp->sdev_target) |= flag; +} +static inline void +NCR_700_clear_flag(struct scsi_device *SDp, __u32 flag) +{ + spi_flags(SDp->sdev_target) &= ~flag; +} + +enum NCR_700_tag_neg_state { + NCR_700_START_TAG_NEGOTIATION = 0, + NCR_700_DURING_TAG_NEGOTIATION = 1, + NCR_700_FINISHED_TAG_NEGOTIATION = 2, +}; + +static inline enum NCR_700_tag_neg_state +NCR_700_get_tag_neg_state(struct scsi_device *SDp) +{ + return (enum NCR_700_tag_neg_state)((spi_flags(SDp->sdev_target)>>20) & 0x3); +} + +static inline void +NCR_700_set_tag_neg_state(struct scsi_device *SDp, + enum NCR_700_tag_neg_state state) +{ + /* clear the slot */ + spi_flags(SDp->sdev_target) &= ~(0x3 << 20); + spi_flags(SDp->sdev_target) |= ((__u32)state) << 20; +} + +struct NCR_700_command_slot { + struct NCR_700_SG_List SG[NCR_700_SG_SEGMENTS+1]; + struct NCR_700_SG_List *pSG; + #define NCR_700_SLOT_MASK 0xFC + #define NCR_700_SLOT_MAGIC 0xb8 + #define NCR_700_SLOT_FREE (0|NCR_700_SLOT_MAGIC) /* slot may be used */ + #define NCR_700_SLOT_BUSY (1|NCR_700_SLOT_MAGIC) /* slot has command active on HA */ + #define NCR_700_SLOT_QUEUED (2|NCR_700_SLOT_MAGIC) /* slot has command to be made active on HA */ + __u8 state; + #define NCR_700_FLAG_AUTOSENSE 0x01 + __u8 flags; + __u8 pad1[2]; /* Needed for m68k where min alignment is 2 bytes */ + int tag; + __u32 resume_offset; + struct scsi_cmnd *cmnd; + /* The pci_mapped address of the actual command in cmnd */ + dma_addr_t pCmd; + __u32 temp; + /* if this command is a pci_single mapping, holds the dma address + * for later unmapping in the done routine */ + dma_addr_t dma_handle; + /* historical remnant, now used to link free commands */ + struct NCR_700_command_slot *ITL_forw; +}; + +struct NCR_700_Host_Parameters { + /* These must be filled in by the calling driver */ + int clock; /* board clock speed in MHz */ + void __iomem *base; /* the base for the port (copied to host) */ + struct device *dev; + __u32 dmode_extra; /* adjustable bus settings */ + __u32 dcntl_extra; /* adjustable bus settings */ + __u32 ctest7_extra; /* adjustable bus settings */ + __u32 differential:1; /* if we are differential */ +#ifdef CONFIG_53C700_LE_ON_BE + /* This option is for HP only. Set it if your chip is wired for + * little endian on this platform (which is big endian) */ + __u32 force_le_on_be:1; +#endif + __u32 chip710:1; /* set if really a 710 not 700 */ + __u32 burst_length:4; /* set to 0 to disable 710 bursting */ + + /* NOTHING BELOW HERE NEEDS ALTERING */ + __u32 fast:1; /* if we can alter the SCSI bus clock + speed (so can negiotiate sync) */ + int sync_clock; /* The speed of the SYNC core */ + + __u32 *script; /* pointer to script location */ + __u32 pScript; /* physical mem addr of script */ + + enum NCR_700_Host_State state; /* protected by state lock */ + struct scsi_cmnd *cmd; + /* Note: pScript contains the single consistent block of + * memory. All the msgin, msgout and status are allocated in + * this memory too (at separate cache lines). TOTAL_MEM_SIZE + * represents the total size of this area */ +#define MSG_ARRAY_SIZE 8 +#define MSGOUT_OFFSET (L1_CACHE_ALIGN(sizeof(SCRIPT))) + __u8 *msgout; +#define MSGIN_OFFSET (MSGOUT_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE)) + __u8 *msgin; +#define STATUS_OFFSET (MSGIN_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE)) + __u8 *status; +#define SLOTS_OFFSET (STATUS_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE)) + struct NCR_700_command_slot *slots; +#define TOTAL_MEM_SIZE (SLOTS_OFFSET + L1_CACHE_ALIGN(sizeof(struct NCR_700_command_slot) * NCR_700_COMMAND_SLOTS_PER_HOST)) + int saved_slot_position; + int command_slot_count; /* protected by state lock */ + __u8 tag_negotiated; + __u8 rev; + __u8 reselection_id; + __u8 min_period; + + /* Free list, singly linked by ITL_forw elements */ + struct NCR_700_command_slot *free_list; + /* Completion for waited for ops, like reset, abort or + * device reset. + * + * NOTE: relies on single threading in the error handler to + * have only one outstanding at once */ + struct completion *eh_complete; +}; + +/* + * 53C700 Register Interface - the offset from the Selected base + * I/O address */ +#ifdef CONFIG_53C700_LE_ON_BE +#define bE (hostdata->force_le_on_be ? 0 : 3) +#define bSWAP (hostdata->force_le_on_be) +#define bEBus (!hostdata->force_le_on_be) +#elif defined(__BIG_ENDIAN) +#define bE 3 +#define bSWAP 0 +#elif defined(__LITTLE_ENDIAN) +#define bE 0 +#define bSWAP 0 +#else +#error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined, did you include byteorder.h?" +#endif +#ifndef bEBus +#ifdef CONFIG_53C700_BE_BUS +#define bEBus 1 +#else +#define bEBus 0 +#endif +#endif +#define bS_to_cpu(x) (bSWAP ? le32_to_cpu(x) : (x)) +#define bS_to_host(x) (bSWAP ? cpu_to_le32(x) : (x)) + +/* NOTE: These registers are in the LE register space only, the required byte + * swapping is done by the NCR_700_{read|write}[b] functions */ +#define SCNTL0_REG 0x00 +#define FULL_ARBITRATION 0xc0 +#define PARITY 0x08 +#define ENABLE_PARITY 0x04 +#define AUTO_ATN 0x02 +#define SCNTL1_REG 0x01 +#define SLOW_BUS 0x80 +#define ENABLE_SELECT 0x20 +#define ASSERT_RST 0x08 +#define ASSERT_EVEN_PARITY 0x04 +#define SDID_REG 0x02 +#define SIEN_REG 0x03 +#define PHASE_MM_INT 0x80 +#define FUNC_COMP_INT 0x40 +#define SEL_TIMEOUT_INT 0x20 +#define SELECT_INT 0x10 +#define GROSS_ERR_INT 0x08 +#define UX_DISC_INT 0x04 +#define RST_INT 0x02 +#define PAR_ERR_INT 0x01 +#define SCID_REG 0x04 +#define SXFER_REG 0x05 +#define ASYNC_OPERATION 0x00 +#define SODL_REG 0x06 +#define SOCL_REG 0x07 +#define SFBR_REG 0x08 +#define SIDL_REG 0x09 +#define SBDL_REG 0x0A +#define SBCL_REG 0x0B +/* read bits */ +#define SBCL_IO 0x01 +/*write bits */ +#define SYNC_DIV_AS_ASYNC 0x00 +#define SYNC_DIV_1_0 0x01 +#define SYNC_DIV_1_5 0x02 +#define SYNC_DIV_2_0 0x03 +#define DSTAT_REG 0x0C +#define ILGL_INST_DETECTED 0x01 +#define WATCH_DOG_INTERRUPT 0x02 +#define SCRIPT_INT_RECEIVED 0x04 +#define ABORTED 0x10 +#define SSTAT0_REG 0x0D +#define PARITY_ERROR 0x01 +#define SCSI_RESET_DETECTED 0x02 +#define UNEXPECTED_DISCONNECT 0x04 +#define SCSI_GROSS_ERROR 0x08 +#define SELECTED 0x10 +#define SELECTION_TIMEOUT 0x20 +#define FUNCTION_COMPLETE 0x40 +#define PHASE_MISMATCH 0x80 +#define SSTAT1_REG 0x0E +#define SIDL_REG_FULL 0x80 +#define SODR_REG_FULL 0x40 +#define SODL_REG_FULL 0x20 +#define SSTAT2_REG 0x0F +#define CTEST0_REG 0x14 +#define BTB_TIMER_DISABLE 0x40 +#define CTEST1_REG 0x15 +#define CTEST2_REG 0x16 +#define CTEST3_REG 0x17 +#define CTEST4_REG 0x18 +#define DISABLE_FIFO 0x00 +#define SLBE 0x10 +#define SFWR 0x08 +#define BYTE_LANE0 0x04 +#define BYTE_LANE1 0x05 +#define BYTE_LANE2 0x06 +#define BYTE_LANE3 0x07 +#define SCSI_ZMODE 0x20 +#define ZMODE 0x40 +#define CTEST5_REG 0x19 +#define MASTER_CONTROL 0x10 +#define DMA_DIRECTION 0x08 +#define CTEST7_REG 0x1B +#define BURST_DISABLE 0x80 /* 710 only */ +#define SEL_TIMEOUT_DISABLE 0x10 /* 710 only */ +#define DFP 0x08 +#define EVP 0x04 +#define CTEST7_TT1 0x02 +#define DIFF 0x01 +#define CTEST6_REG 0x1A +#define TEMP_REG 0x1C +#define DFIFO_REG 0x20 +#define FLUSH_DMA_FIFO 0x80 +#define CLR_FIFO 0x40 +#define ISTAT_REG 0x21 +#define ABORT_OPERATION 0x80 +#define SOFTWARE_RESET_710 0x40 +#define DMA_INT_PENDING 0x01 +#define SCSI_INT_PENDING 0x02 +#define CONNECTED 0x08 +#define CTEST8_REG 0x22 +#define LAST_DIS_ENBL 0x01 +#define SHORTEN_FILTERING 0x04 +#define ENABLE_ACTIVE_NEGATION 0x10 +#define GENERATE_RECEIVE_PARITY 0x20 +#define CLR_FIFO_710 0x04 +#define FLUSH_DMA_FIFO_710 0x08 +#define CTEST9_REG 0x23 +#define DBC_REG 0x24 +#define DCMD_REG 0x27 +#define DNAD_REG 0x28 +#define DIEN_REG 0x39 +#define BUS_FAULT 0x20 +#define ABORT_INT 0x10 +#define INT_INST_INT 0x04 +#define WD_INT 0x02 +#define ILGL_INST_INT 0x01 +#define DCNTL_REG 0x3B +#define SOFTWARE_RESET 0x01 +#define COMPAT_700_MODE 0x01 +#define SCRPTS_16BITS 0x20 +#define EA_710 0x20 +#define ASYNC_DIV_2_0 0x00 +#define ASYNC_DIV_1_5 0x40 +#define ASYNC_DIV_1_0 0x80 +#define ASYNC_DIV_3_0 0xc0 +#define DMODE_710_REG 0x38 +#define DMODE_700_REG 0x34 +#define BURST_LENGTH_1 0x00 +#define BURST_LENGTH_2 0x40 +#define BURST_LENGTH_4 0x80 +#define BURST_LENGTH_8 0xC0 +#define DMODE_FC1 0x10 +#define DMODE_FC2 0x20 +#define BW16 32 +#define MODE_286 16 +#define IO_XFER 8 +#define FIXED_ADDR 4 + +#define DSP_REG 0x2C +#define DSPS_REG 0x30 + +/* Parameters to begin SDTR negotiations. Empirically, I find that + * the 53c700-66 cannot handle an offset >8, so don't change this */ +#define NCR_700_MAX_OFFSET 8 +/* Was hoping the max offset would be greater for the 710, but + * empirically it seems to be 8 also */ +#define NCR_710_MAX_OFFSET 8 +#define NCR_700_MIN_XFERP 1 +#define NCR_710_MIN_XFERP 0 +#define NCR_700_MIN_PERIOD 25 /* for SDTR message, 100ns */ + +#define script_patch_32(dev, script, symbol, value) \ +{ \ + int i; \ + for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ + __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]) + value; \ + (script)[A_##symbol##_used[i]] = bS_to_host(val); \ + dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \ + DEBUG((" script, patching %s at %d to 0x%lx\n", \ + #symbol, A_##symbol##_used[i], (value))); \ + } \ +} + +#define script_patch_32_abs(dev, script, symbol, value) \ +{ \ + int i; \ + for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ + (script)[A_##symbol##_used[i]] = bS_to_host(value); \ + dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \ + DEBUG((" script, patching %s at %d to 0x%lx\n", \ + #symbol, A_##symbol##_used[i], (value))); \ + } \ +} + +/* Used for patching the SCSI ID in the SELECT instruction */ +#define script_patch_ID(dev, script, symbol, value) \ +{ \ + int i; \ + for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ + __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \ + val &= 0xff00ffff; \ + val |= ((value) & 0xff) << 16; \ + (script)[A_##symbol##_used[i]] = bS_to_host(val); \ + dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \ + DEBUG((" script, patching ID field %s at %d to 0x%x\n", \ + #symbol, A_##symbol##_used[i], val)); \ + } \ +} + +#define script_patch_16(dev, script, symbol, value) \ +{ \ + int i; \ + for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \ + __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \ + val &= 0xffff0000; \ + val |= ((value) & 0xffff); \ + (script)[A_##symbol##_used[i]] = bS_to_host(val); \ + dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \ + DEBUG((" script, patching short field %s at %d to 0x%x\n", \ + #symbol, A_##symbol##_used[i], val)); \ + } \ +} + + +static inline __u8 +NCR_700_readb(struct Scsi_Host *host, __u32 reg) +{ + const struct NCR_700_Host_Parameters *hostdata + = (struct NCR_700_Host_Parameters *)host->hostdata[0]; + + return ioread8(hostdata->base + (reg^bE)); +} + +static inline __u32 +NCR_700_readl(struct Scsi_Host *host, __u32 reg) +{ + const struct NCR_700_Host_Parameters *hostdata + = (struct NCR_700_Host_Parameters *)host->hostdata[0]; + __u32 value = bEBus ? ioread32be(hostdata->base + reg) : + ioread32(hostdata->base + reg); +#if 1 + /* sanity check the register */ + BUG_ON((reg & 0x3) != 0); +#endif + + return value; +} + +static inline void +NCR_700_writeb(__u8 value, struct Scsi_Host *host, __u32 reg) +{ + const struct NCR_700_Host_Parameters *hostdata + = (struct NCR_700_Host_Parameters *)host->hostdata[0]; + + iowrite8(value, hostdata->base + (reg^bE)); +} + +static inline void +NCR_700_writel(__u32 value, struct Scsi_Host *host, __u32 reg) +{ + const struct NCR_700_Host_Parameters *hostdata + = (struct NCR_700_Host_Parameters *)host->hostdata[0]; + +#if 1 + /* sanity check the register */ + BUG_ON((reg & 0x3) != 0); +#endif + + bEBus ? iowrite32be(value, hostdata->base + reg): + iowrite32(value, hostdata->base + reg); +} + +#endif |