diff options
Diffstat (limited to 'drivers/scsi/a100u2w.c')
| -rw-r--r-- | drivers/scsi/a100u2w.c | 1241 |
1 files changed, 1241 insertions, 0 deletions
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c new file mode 100644 index 000000000..7e33a61c1 --- /dev/null +++ b/drivers/scsi/a100u2w.c @@ -0,0 +1,1241 @@ +/* + * Initio A100 device driver for Linux. + * + * Copyright (c) 1994-1998 Initio Corporation + * Copyright (c) 2003-2004 Christoph Hellwig + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +/* + * Revision History: + * 07/02/98 hl - v.91n Initial drivers. + * 09/14/98 hl - v1.01 Support new Kernel. + * 09/22/98 hl - v1.01a Support reset. + * 09/24/98 hl - v1.01b Fixed reset. + * 10/05/98 hl - v1.02 split the source code and release. + * 12/19/98 bv - v1.02a Use spinlocks for 2.1.95 and up + * 01/31/99 bv - v1.02b Use mdelay instead of waitForPause + * 08/08/99 bv - v1.02c Use waitForPause again. + * 06/25/02 Doug Ledford <dledford@redhat.com> - v1.02d + * - Remove limit on number of controllers + * - Port to DMA mapping API + * - Clean up interrupt handler registration + * - Fix memory leaks + * - Fix allocation of scsi host structs and private data + * 11/18/03 Christoph Hellwig <hch@lst.de> + * - Port to new probing API + * - Fix some more leaks in init failure cases + * 9/28/04 Christoph Hellwig <hch@lst.de> + * - merge the two source files + * - remove internal queueing code + * 14/06/07 Alan Cox <alan@lxorguk.ukuu.org.uk> + * - Grand cleanup and Linuxisation + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/spinlock.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/dma-mapping.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> + +#include "a100u2w.h" + + +static struct orc_scb *__orc_alloc_scb(struct orc_host * host); +static void inia100_scb_handler(struct orc_host *host, struct orc_scb *scb); + +static struct orc_nvram nvram, *nvramp = &nvram; + +static u8 default_nvram[64] = +{ +/*----------header -------------*/ + 0x01, /* 0x00: Sub System Vendor ID 0 */ + 0x11, /* 0x01: Sub System Vendor ID 1 */ + 0x60, /* 0x02: Sub System ID 0 */ + 0x10, /* 0x03: Sub System ID 1 */ + 0x00, /* 0x04: SubClass */ + 0x01, /* 0x05: Vendor ID 0 */ + 0x11, /* 0x06: Vendor ID 1 */ + 0x60, /* 0x07: Device ID 0 */ + 0x10, /* 0x08: Device ID 1 */ + 0x00, /* 0x09: Reserved */ + 0x00, /* 0x0A: Reserved */ + 0x01, /* 0x0B: Revision of Data Structure */ + /* -- Host Adapter Structure --- */ + 0x01, /* 0x0C: Number Of SCSI Channel */ + 0x01, /* 0x0D: BIOS Configuration 1 */ + 0x00, /* 0x0E: BIOS Configuration 2 */ + 0x00, /* 0x0F: BIOS Configuration 3 */ + /* --- SCSI Channel 0 Configuration --- */ + 0x07, /* 0x10: H/A ID */ + 0x83, /* 0x11: Channel Configuration */ + 0x20, /* 0x12: MAX TAG per target */ + 0x0A, /* 0x13: SCSI Reset Recovering time */ + 0x00, /* 0x14: Channel Configuration4 */ + 0x00, /* 0x15: Channel Configuration5 */ + /* SCSI Channel 0 Target Configuration */ + /* 0x16-0x25 */ + 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, + 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, + /* --- SCSI Channel 1 Configuration --- */ + 0x07, /* 0x26: H/A ID */ + 0x83, /* 0x27: Channel Configuration */ + 0x20, /* 0x28: MAX TAG per target */ + 0x0A, /* 0x29: SCSI Reset Recovering time */ + 0x00, /* 0x2A: Channel Configuration4 */ + 0x00, /* 0x2B: Channel Configuration5 */ + /* SCSI Channel 1 Target Configuration */ + /* 0x2C-0x3B */ + 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, + 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, + 0x00, /* 0x3C: Reserved */ + 0x00, /* 0x3D: Reserved */ + 0x00, /* 0x3E: Reserved */ + 0x00 /* 0x3F: Checksum */ +}; + + +static u8 wait_chip_ready(struct orc_host * host) +{ + int i; + + for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */ + if (inb(host->base + ORC_HCTRL) & HOSTSTOP) /* Wait HOSTSTOP set */ + return 1; + mdelay(100); + } + return 0; +} + +static u8 wait_firmware_ready(struct orc_host * host) +{ + int i; + + for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */ + if (inb(host->base + ORC_HSTUS) & RREADY) /* Wait READY set */ + return 1; + mdelay(100); /* wait 100ms before try again */ + } + return 0; +} + +/***************************************************************************/ +static u8 wait_scsi_reset_done(struct orc_host * host) +{ + int i; + + for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */ + if (!(inb(host->base + ORC_HCTRL) & SCSIRST)) /* Wait SCSIRST done */ + return 1; + mdelay(100); /* wait 100ms before try again */ + } + return 0; +} + +/***************************************************************************/ +static u8 wait_HDO_off(struct orc_host * host) +{ + int i; + + for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */ + if (!(inb(host->base + ORC_HCTRL) & HDO)) /* Wait HDO off */ + return 1; + mdelay(100); /* wait 100ms before try again */ + } + return 0; +} + +/***************************************************************************/ +static u8 wait_hdi_set(struct orc_host * host, u8 * data) +{ + int i; + + for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */ + if ((*data = inb(host->base + ORC_HSTUS)) & HDI) + return 1; /* Wait HDI set */ + mdelay(100); /* wait 100ms before try again */ + } + return 0; +} + +/***************************************************************************/ +static unsigned short orc_read_fwrev(struct orc_host * host) +{ + u16 version; + u8 data; + + outb(ORC_CMD_VERSION, host->base + ORC_HDATA); + outb(HDO, host->base + ORC_HCTRL); + if (wait_HDO_off(host) == 0) /* Wait HDO off */ + return 0; + + if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */ + return 0; + version = inb(host->base + ORC_HDATA); + outb(data, host->base + ORC_HSTUS); /* Clear HDI */ + + if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */ + return 0; + version |= inb(host->base + ORC_HDATA) << 8; + outb(data, host->base + ORC_HSTUS); /* Clear HDI */ + + return version; +} + +/***************************************************************************/ +static u8 orc_nv_write(struct orc_host * host, unsigned char address, unsigned char value) +{ + outb(ORC_CMD_SET_NVM, host->base + ORC_HDATA); /* Write command */ + outb(HDO, host->base + ORC_HCTRL); + if (wait_HDO_off(host) == 0) /* Wait HDO off */ + return 0; + + outb(address, host->base + ORC_HDATA); /* Write address */ + outb(HDO, host->base + ORC_HCTRL); + if (wait_HDO_off(host) == 0) /* Wait HDO off */ + return 0; + + outb(value, host->base + ORC_HDATA); /* Write value */ + outb(HDO, host->base + ORC_HCTRL); + if (wait_HDO_off(host) == 0) /* Wait HDO off */ + return 0; + + return 1; +} + +/***************************************************************************/ +static u8 orc_nv_read(struct orc_host * host, u8 address, u8 *ptr) +{ + unsigned char data; + + outb(ORC_CMD_GET_NVM, host->base + ORC_HDATA); /* Write command */ + outb(HDO, host->base + ORC_HCTRL); + if (wait_HDO_off(host) == 0) /* Wait HDO off */ + return 0; + + outb(address, host->base + ORC_HDATA); /* Write address */ + outb(HDO, host->base + ORC_HCTRL); + if (wait_HDO_off(host) == 0) /* Wait HDO off */ + return 0; + + if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */ + return 0; + *ptr = inb(host->base + ORC_HDATA); + outb(data, host->base + ORC_HSTUS); /* Clear HDI */ + + return 1; + +} + +/** + * orc_exec_sb - Queue an SCB with the HA + * @host: host adapter the SCB belongs to + * @scb: SCB to queue for execution + */ + +static void orc_exec_scb(struct orc_host * host, struct orc_scb * scb) +{ + scb->status = ORCSCB_POST; + outb(scb->scbidx, host->base + ORC_PQUEUE); +} + + +/** + * se2_rd_all - read SCSI parameters from EEPROM + * @host: Host whose EEPROM is being loaded + * + * Read SCSI H/A configuration parameters from serial EEPROM + */ + +static int se2_rd_all(struct orc_host * host) +{ + int i; + u8 *np, chksum = 0; + + np = (u8 *) nvramp; + for (i = 0; i < 64; i++, np++) { /* <01> */ + if (orc_nv_read(host, (u8) i, np) == 0) + return -1; + } + + /*------ Is ckecksum ok ? ------*/ + np = (u8 *) nvramp; + for (i = 0; i < 63; i++) + chksum += *np++; + + if (nvramp->CheckSum != (u8) chksum) + return -1; + return 1; +} + +/** + * se2_update_all - update the EEPROM + * @host: Host whose EEPROM is being updated + * + * Update changed bytes in the EEPROM image. + */ + +static void se2_update_all(struct orc_host * host) +{ /* setup default pattern */ + int i; + u8 *np, *np1, chksum = 0; + + /* Calculate checksum first */ + np = (u8 *) default_nvram; + for (i = 0; i < 63; i++) + chksum += *np++; + *np = chksum; + + np = (u8 *) default_nvram; + np1 = (u8 *) nvramp; + for (i = 0; i < 64; i++, np++, np1++) { + if (*np != *np1) + orc_nv_write(host, (u8) i, *np); + } +} + +/** + * read_eeprom - load EEPROM + * @host: Host EEPROM to read + * + * Read the EEPROM for a given host. If it is invalid or fails + * the restore the defaults and use them. + */ + +static void read_eeprom(struct orc_host * host) +{ + if (se2_rd_all(host) != 1) { + se2_update_all(host); /* setup default pattern */ + se2_rd_all(host); /* load again */ + } +} + + +/** + * orc_load_firmware - initialise firmware + * @host: Host to set up + * + * Load the firmware from the EEPROM into controller SRAM. This + * is basically a 4K block copy and then a 4K block read to check + * correctness. The rest is convulted by the indirect interfaces + * in the hardware + */ + +static u8 orc_load_firmware(struct orc_host * host) +{ + u32 data32; + u16 bios_addr; + u16 i; + u8 *data32_ptr, data; + + + /* Set up the EEPROM for access */ + + data = inb(host->base + ORC_GCFG); + outb(data | EEPRG, host->base + ORC_GCFG); /* Enable EEPROM programming */ + outb(0x00, host->base + ORC_EBIOSADR2); + outw(0x0000, host->base + ORC_EBIOSADR0); + if (inb(host->base + ORC_EBIOSDATA) != 0x55) { + outb(data, host->base + ORC_GCFG); /* Disable EEPROM programming */ + return 0; + } + outw(0x0001, host->base + ORC_EBIOSADR0); + if (inb(host->base + ORC_EBIOSDATA) != 0xAA) { + outb(data, host->base + ORC_GCFG); /* Disable EEPROM programming */ + return 0; + } + + outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Enable SRAM programming */ + data32_ptr = (u8 *) & data32; + data32 = cpu_to_le32(0); /* Initial FW address to 0 */ + outw(0x0010, host->base + ORC_EBIOSADR0); + *data32_ptr = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */ + outw(0x0011, host->base + ORC_EBIOSADR0); + *(data32_ptr + 1) = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */ + outw(0x0012, host->base + ORC_EBIOSADR0); + *(data32_ptr + 2) = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */ + outw(*(data32_ptr + 2), host->base + ORC_EBIOSADR2); + outl(le32_to_cpu(data32), host->base + ORC_FWBASEADR); /* Write FW address */ + + /* Copy the code from the BIOS to the SRAM */ + + udelay(500); /* Required on Sun Ultra 5 ... 350 -> failures */ + bios_addr = (u16) le32_to_cpu(data32); /* FW code locate at BIOS address + ? */ + for (i = 0, data32_ptr = (u8 *) & data32; /* Download the code */ + i < 0x1000; /* Firmware code size = 4K */ + i++, bios_addr++) { + outw(bios_addr, host->base + ORC_EBIOSADR0); + *data32_ptr++ = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */ + if ((i % 4) == 3) { + outl(le32_to_cpu(data32), host->base + ORC_RISCRAM); /* Write every 4 bytes */ + data32_ptr = (u8 *) & data32; + } + } + + /* Go back and check they match */ + + outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Reset program count 0 */ + bios_addr -= 0x1000; /* Reset the BIOS address */ + for (i = 0, data32_ptr = (u8 *) & data32; /* Check the code */ + i < 0x1000; /* Firmware code size = 4K */ + i++, bios_addr++) { + outw(bios_addr, host->base + ORC_EBIOSADR0); + *data32_ptr++ = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */ + if ((i % 4) == 3) { + if (inl(host->base + ORC_RISCRAM) != le32_to_cpu(data32)) { + outb(PRGMRST, host->base + ORC_RISCCTL); /* Reset program to 0 */ + outb(data, host->base + ORC_GCFG); /*Disable EEPROM programming */ + return 0; + } + data32_ptr = (u8 *) & data32; + } + } + + /* Success */ + outb(PRGMRST, host->base + ORC_RISCCTL); /* Reset program to 0 */ + outb(data, host->base + ORC_GCFG); /* Disable EEPROM programming */ + return 1; +} + +/***************************************************************************/ +static void setup_SCBs(struct orc_host * host) +{ + struct orc_scb *scb; + int i; + struct orc_extended_scb *escb; + dma_addr_t escb_phys; + + /* Setup SCB base and SCB Size registers */ + outb(ORC_MAXQUEUE, host->base + ORC_SCBSIZE); /* Total number of SCBs */ + /* SCB base address 0 */ + outl(host->scb_phys, host->base + ORC_SCBBASE0); + /* SCB base address 1 */ + outl(host->scb_phys, host->base + ORC_SCBBASE1); + + /* setup scatter list address with one buffer */ + scb = host->scb_virt; + escb = host->escb_virt; + + for (i = 0; i < ORC_MAXQUEUE; i++) { + escb_phys = (host->escb_phys + (sizeof(struct orc_extended_scb) * i)); + scb->sg_addr = cpu_to_le32((u32) escb_phys); + scb->sense_addr = cpu_to_le32((u32) escb_phys); + scb->escb = escb; + scb->scbidx = i; + scb++; + escb++; + } +} + +/** + * init_alloc_map - initialise allocation map + * @host: host map to configure + * + * Initialise the allocation maps for this device. If the device + * is not quiescent the caller must hold the allocation lock + */ + +static void init_alloc_map(struct orc_host * host) +{ + u8 i, j; + + for (i = 0; i < MAX_CHANNELS; i++) { + for (j = 0; j < 8; j++) { + host->allocation_map[i][j] = 0xffffffff; + } + } +} + +/** + * init_orchid - initialise the host adapter + * @host:host adapter to initialise + * + * Initialise the controller and if necessary load the firmware. + * + * Returns -1 if the initialisation fails. + */ + +static int init_orchid(struct orc_host * host) +{ + u8 *ptr; + u16 revision; + u8 i; + + init_alloc_map(host); + outb(0xFF, host->base + ORC_GIMSK); /* Disable all interrupts */ + + if (inb(host->base + ORC_HSTUS) & RREADY) { /* Orchid is ready */ + revision = orc_read_fwrev(host); + if (revision == 0xFFFF) { + outb(DEVRST, host->base + ORC_HCTRL); /* Reset Host Adapter */ + if (wait_chip_ready(host) == 0) + return -1; + orc_load_firmware(host); /* Download FW */ + setup_SCBs(host); /* Setup SCB base and SCB Size registers */ + outb(0x00, host->base + ORC_HCTRL); /* clear HOSTSTOP */ + if (wait_firmware_ready(host) == 0) + return -1; + /* Wait for firmware ready */ + } else { + setup_SCBs(host); /* Setup SCB base and SCB Size registers */ + } + } else { /* Orchid is not Ready */ + outb(DEVRST, host->base + ORC_HCTRL); /* Reset Host Adapter */ + if (wait_chip_ready(host) == 0) + return -1; + orc_load_firmware(host); /* Download FW */ + setup_SCBs(host); /* Setup SCB base and SCB Size registers */ + outb(HDO, host->base + ORC_HCTRL); /* Do Hardware Reset & */ + + /* clear HOSTSTOP */ + if (wait_firmware_ready(host) == 0) /* Wait for firmware ready */ + return -1; + } + + /* Load an EEProm copy into RAM */ + /* Assumes single threaded at this point */ + read_eeprom(host); + + if (nvramp->revision != 1) + return -1; + + host->scsi_id = nvramp->scsi_id; + host->BIOScfg = nvramp->BIOSConfig1; + host->max_targets = MAX_TARGETS; + ptr = (u8 *) & (nvramp->Target00Config); + for (i = 0; i < 16; ptr++, i++) { + host->target_flag[i] = *ptr; + host->max_tags[i] = ORC_MAXTAGS; + } + + if (nvramp->SCSI0Config & NCC_BUSRESET) + host->flags |= HCF_SCSI_RESET; + outb(0xFB, host->base + ORC_GIMSK); /* enable RP FIFO interrupt */ + return 0; +} + +/** + * orc_reset_scsi_bus - perform bus reset + * @host: host being reset + * + * Perform a full bus reset on the adapter. + */ + +static int orc_reset_scsi_bus(struct orc_host * host) +{ /* I need Host Control Block Information */ + unsigned long flags; + + spin_lock_irqsave(&host->allocation_lock, flags); + + init_alloc_map(host); + /* reset scsi bus */ + outb(SCSIRST, host->base + ORC_HCTRL); + /* FIXME: We can spend up to a second with the lock held and + interrupts off here */ + if (wait_scsi_reset_done(host) == 0) { + spin_unlock_irqrestore(&host->allocation_lock, flags); + return FAILED; + } else { + spin_unlock_irqrestore(&host->allocation_lock, flags); + return SUCCESS; + } +} + +/** + * orc_device_reset - device reset handler + * @host: host to reset + * @cmd: command causing the reset + * @target; target device + * + * Reset registers, reset a hanging bus and kill active and disconnected + * commands for target w/o soft reset + */ + +static int orc_device_reset(struct orc_host * host, struct scsi_cmnd *cmd, unsigned int target) +{ /* I need Host Control Block Information */ + struct orc_scb *scb; + struct orc_extended_scb *escb; + struct orc_scb *host_scb; + u8 i; + unsigned long flags; + + spin_lock_irqsave(&(host->allocation_lock), flags); + scb = (struct orc_scb *) NULL; + escb = (struct orc_extended_scb *) NULL; + + /* setup scatter list address with one buffer */ + host_scb = host->scb_virt; + + /* FIXME: is this safe if we then fail to issue the reset or race + a completion ? */ + init_alloc_map(host); + + /* Find the scb corresponding to the command */ + for (i = 0; i < ORC_MAXQUEUE; i++) { + escb = host_scb->escb; + if (host_scb->status && escb->srb == cmd) + break; + host_scb++; + } + + if (i == ORC_MAXQUEUE) { + printk(KERN_ERR "Unable to Reset - No SCB Found\n"); + spin_unlock_irqrestore(&(host->allocation_lock), flags); + return FAILED; + } + + /* Allocate a new SCB for the reset command to the firmware */ + if ((scb = __orc_alloc_scb(host)) == NULL) { + /* Can't happen.. */ + spin_unlock_irqrestore(&(host->allocation_lock), flags); + return FAILED; + } + + /* Reset device is handled by the firmware, we fill in an SCB and + fire it at the controller, it does the rest */ + scb->opcode = ORC_BUSDEVRST; + scb->target = target; + scb->hastat = 0; + scb->tastat = 0; + scb->status = 0x0; + scb->link = 0xFF; + scb->reserved0 = 0; + scb->reserved1 = 0; + scb->xferlen = cpu_to_le32(0); + scb->sg_len = cpu_to_le32(0); + + escb->srb = NULL; + escb->srb = cmd; + orc_exec_scb(host, scb); /* Start execute SCB */ + spin_unlock_irqrestore(&host->allocation_lock, flags); + return SUCCESS; +} + +/** + * __orc_alloc_scb - allocate an SCB + * @host: host to allocate from + * + * Allocate an SCB and return a pointer to the SCB object. NULL + * is returned if no SCB is free. The caller must already hold + * the allocator lock at this point. + */ + + +static struct orc_scb *__orc_alloc_scb(struct orc_host * host) +{ + u8 channel; + unsigned long idx; + u8 index; + u8 i; + + channel = host->index; + for (i = 0; i < 8; i++) { + for (index = 0; index < 32; index++) { + if ((host->allocation_map[channel][i] >> index) & 0x01) { + host->allocation_map[channel][i] &= ~(1 << index); + idx = index + 32 * i; + /* + * Translate the index to a structure instance + */ + return host->scb_virt + idx; + } + } + } + return NULL; +} + +/** + * orc_alloc_scb - allocate an SCB + * @host: host to allocate from + * + * Allocate an SCB and return a pointer to the SCB object. NULL + * is returned if no SCB is free. + */ + +static struct orc_scb *orc_alloc_scb(struct orc_host * host) +{ + struct orc_scb *scb; + unsigned long flags; + + spin_lock_irqsave(&host->allocation_lock, flags); + scb = __orc_alloc_scb(host); + spin_unlock_irqrestore(&host->allocation_lock, flags); + return scb; +} + +/** + * orc_release_scb - release an SCB + * @host: host owning the SCB + * @scb: SCB that is now free + * + * Called to return a completed SCB to the allocation pool. Before + * calling the SCB must be out of use on both the host and the HA. + */ + +static void orc_release_scb(struct orc_host *host, struct orc_scb *scb) +{ + unsigned long flags; + u8 index, i, channel; + + spin_lock_irqsave(&(host->allocation_lock), flags); + channel = host->index; /* Channel */ + index = scb->scbidx; + i = index / 32; + index %= 32; + host->allocation_map[channel][i] |= (1 << index); + spin_unlock_irqrestore(&(host->allocation_lock), flags); +} + +/** + * orchid_abort_scb - abort a command + * + * Abort a queued command that has been passed to the firmware layer + * if possible. This is all handled by the firmware. We aks the firmware + * and it either aborts the command or fails + */ + +static int orchid_abort_scb(struct orc_host * host, struct orc_scb * scb) +{ + unsigned char data, status; + + outb(ORC_CMD_ABORT_SCB, host->base + ORC_HDATA); /* Write command */ + outb(HDO, host->base + ORC_HCTRL); + if (wait_HDO_off(host) == 0) /* Wait HDO off */ + return 0; + + outb(scb->scbidx, host->base + ORC_HDATA); /* Write address */ + outb(HDO, host->base + ORC_HCTRL); + if (wait_HDO_off(host) == 0) /* Wait HDO off */ + return 0; + + if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */ + return 0; + status = inb(host->base + ORC_HDATA); + outb(data, host->base + ORC_HSTUS); /* Clear HDI */ + + if (status == 1) /* 0 - Successfully */ + return 0; /* 1 - Fail */ + return 1; +} + +static int inia100_abort_cmd(struct orc_host * host, struct scsi_cmnd *cmd) +{ + struct orc_extended_scb *escb; + struct orc_scb *scb; + u8 i; + unsigned long flags; + + spin_lock_irqsave(&(host->allocation_lock), flags); + + scb = host->scb_virt; + + /* Walk the queue until we find the SCB that belongs to the command + block. This isn't a performance critical path so a walk in the park + here does no harm */ + + for (i = 0; i < ORC_MAXQUEUE; i++, scb++) { + escb = scb->escb; + if (scb->status && escb->srb == cmd) { + if (scb->tag_msg == 0) { + goto out; + } else { + /* Issue an ABORT to the firmware */ + if (orchid_abort_scb(host, scb)) { + escb->srb = NULL; + spin_unlock_irqrestore(&host->allocation_lock, flags); + return SUCCESS; + } else + goto out; + } + } + } +out: + spin_unlock_irqrestore(&host->allocation_lock, flags); + return FAILED; +} + +/** + * orc_interrupt - IRQ processing + * @host: Host causing the interrupt + * + * This function is called from the IRQ handler and protected + * by the host lock. While the controller reports that there are + * scb's for processing we pull them off the controller, turn the + * index into a host address pointer to the scb and call the scb + * handler. + * + * Returns IRQ_HANDLED if any SCBs were processed, IRQ_NONE otherwise + */ + +static irqreturn_t orc_interrupt(struct orc_host * host) +{ + u8 scb_index; + struct orc_scb *scb; + + /* Check if we have an SCB queued for servicing */ + if (inb(host->base + ORC_RQUEUECNT) == 0) + return IRQ_NONE; + + do { + /* Get the SCB index of the SCB to service */ + scb_index = inb(host->base + ORC_RQUEUE); + + /* Translate it back to a host pointer */ + scb = (struct orc_scb *) ((unsigned long) host->scb_virt + (unsigned long) (sizeof(struct orc_scb) * scb_index)); + scb->status = 0x0; + /* Process the SCB */ + inia100_scb_handler(host, scb); + } while (inb(host->base + ORC_RQUEUECNT)); + return IRQ_HANDLED; +} /* End of I1060Interrupt() */ + +/** + * inia100_build_scb - build SCB + * @host: host owing the control block + * @scb: control block to use + * @cmd: Mid layer command + * + * Build a host adapter control block from the SCSI mid layer command + */ + +static int inia100_build_scb(struct orc_host * host, struct orc_scb * scb, struct scsi_cmnd * cmd) +{ /* Create corresponding SCB */ + struct scatterlist *sg; + struct orc_sgent *sgent; /* Pointer to SG list */ + int i, count_sg; + struct orc_extended_scb *escb; + + /* Links between the escb, scb and Linux scsi midlayer cmd */ + escb = scb->escb; + escb->srb = cmd; + sgent = NULL; + + /* Set up the SCB to do a SCSI command block */ + scb->opcode = ORC_EXECSCSI; + scb->flags = SCF_NO_DCHK; /* Clear done bit */ + scb->target = cmd->device->id; + scb->lun = cmd->device->lun; + scb->reserved0 = 0; + scb->reserved1 = 0; + scb->sg_len = cpu_to_le32(0); + + scb->xferlen = cpu_to_le32((u32) scsi_bufflen(cmd)); + sgent = (struct orc_sgent *) & escb->sglist[0]; + + count_sg = scsi_dma_map(cmd); + if (count_sg < 0) + return count_sg; + BUG_ON(count_sg > TOTAL_SG_ENTRY); + + /* Build the scatter gather lists */ + if (count_sg) { + scb->sg_len = cpu_to_le32((u32) (count_sg * 8)); + scsi_for_each_sg(cmd, sg, count_sg, i) { + sgent->base = cpu_to_le32((u32) sg_dma_address(sg)); + sgent->length = cpu_to_le32((u32) sg_dma_len(sg)); + sgent++; + } + } else { + scb->sg_len = cpu_to_le32(0); + sgent->base = cpu_to_le32(0); + sgent->length = cpu_to_le32(0); + } + scb->sg_addr = (u32) scb->sense_addr; /* sense_addr is already little endian */ + scb->hastat = 0; + scb->tastat = 0; + scb->link = 0xFF; + scb->sense_len = SENSE_SIZE; + scb->cdb_len = cmd->cmd_len; + if (scb->cdb_len >= IMAX_CDB) { + printk("max cdb length= %x\b", cmd->cmd_len); + scb->cdb_len = IMAX_CDB; + } + scb->ident = (u8)(cmd->device->lun & 0xff) | DISC_ALLOW; + if (cmd->device->tagged_supported) { /* Tag Support */ + scb->tag_msg = SIMPLE_QUEUE_TAG; /* Do simple tag only */ + } else { + scb->tag_msg = 0; /* No tag support */ + } + memcpy(scb->cdb, cmd->cmnd, scb->cdb_len); + return 0; +} + +/** + * inia100_queue - queue command with host + * @cmd: Command block + * @done: Completion function + * + * Called by the mid layer to queue a command. Process the command + * block, build the host specific scb structures and if there is room + * queue the command down to the controller + */ + +static int inia100_queue_lck(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *)) +{ + struct orc_scb *scb; + struct orc_host *host; /* Point to Host adapter control block */ + + host = (struct orc_host *) cmd->device->host->hostdata; + cmd->scsi_done = done; + /* Get free SCSI control block */ + if ((scb = orc_alloc_scb(host)) == NULL) + return SCSI_MLQUEUE_HOST_BUSY; + + if (inia100_build_scb(host, scb, cmd)) { + orc_release_scb(host, scb); + return SCSI_MLQUEUE_HOST_BUSY; + } + orc_exec_scb(host, scb); /* Start execute SCB */ + return 0; +} + +static DEF_SCSI_QCMD(inia100_queue) + +/***************************************************************************** + Function name : inia100_abort + Description : Abort a queued command. + (commands that are on the bus can't be aborted easily) + Input : host - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static int inia100_abort(struct scsi_cmnd * cmd) +{ + struct orc_host *host; + + host = (struct orc_host *) cmd->device->host->hostdata; + return inia100_abort_cmd(host, cmd); +} + +/***************************************************************************** + Function name : inia100_reset + Description : Reset registers, reset a hanging bus and + kill active and disconnected commands for target w/o soft reset + Input : host - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static int inia100_bus_reset(struct scsi_cmnd * cmd) +{ /* I need Host Control Block Information */ + struct orc_host *host; + host = (struct orc_host *) cmd->device->host->hostdata; + return orc_reset_scsi_bus(host); +} + +/***************************************************************************** + Function name : inia100_device_reset + Description : Reset the device + Input : host - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static int inia100_device_reset(struct scsi_cmnd * cmd) +{ /* I need Host Control Block Information */ + struct orc_host *host; + host = (struct orc_host *) cmd->device->host->hostdata; + return orc_device_reset(host, cmd, scmd_id(cmd)); + +} + +/** + * inia100_scb_handler - interrupt callback + * @host: Host causing the interrupt + * @scb: SCB the controller returned as needing processing + * + * Perform completion processing on a control block. Do the conversions + * from host to SCSI midlayer error coding, save any sense data and + * the complete with the midlayer and recycle the scb. + */ + +static void inia100_scb_handler(struct orc_host *host, struct orc_scb *scb) +{ + struct scsi_cmnd *cmd; /* Pointer to SCSI request block */ + struct orc_extended_scb *escb; + + escb = scb->escb; + if ((cmd = (struct scsi_cmnd *) escb->srb) == NULL) { + printk(KERN_ERR "inia100_scb_handler: SRB pointer is empty\n"); + orc_release_scb(host, scb); /* Release SCB for current channel */ + return; + } + escb->srb = NULL; + + switch (scb->hastat) { + case 0x0: + case 0xa: /* Linked command complete without error and linked normally */ + case 0xb: /* Linked command complete without error interrupt generated */ + scb->hastat = 0; + break; + + case 0x11: /* Selection time out-The initiator selection or target + reselection was not complete within the SCSI Time out period */ + scb->hastat = DID_TIME_OUT; + break; + + case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus + phase sequence was requested by the target. The host adapter + will generate a SCSI Reset Condition, notifying the host with + a SCRD interrupt */ + scb->hastat = DID_RESET; + break; + + case 0x1a: /* SCB Aborted. 07/21/98 */ + scb->hastat = DID_ABORT; + break; + + case 0x12: /* Data overrun/underrun-The target attempted to transfer more data + than was allocated by the Data Length field or the sum of the + Scatter / Gather Data Length fields. */ + case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */ + case 0x16: /* Invalid CCB Operation Code-The first byte of the CCB was invalid. */ + + default: + printk(KERN_DEBUG "inia100: %x %x\n", scb->hastat, scb->tastat); + scb->hastat = DID_ERROR; /* Couldn't find any better */ + break; + } + + if (scb->tastat == 2) { /* Check condition */ + memcpy((unsigned char *) &cmd->sense_buffer[0], + (unsigned char *) &escb->sglist[0], SENSE_SIZE); + } + cmd->result = scb->tastat | (scb->hastat << 16); + scsi_dma_unmap(cmd); + cmd->scsi_done(cmd); /* Notify system DONE */ + orc_release_scb(host, scb); /* Release SCB for current channel */ +} + +/** + * inia100_intr - interrupt handler + * @irqno: Interrupt value + * @devid: Host adapter + * + * Entry point for IRQ handling. All the real work is performed + * by orc_interrupt. + */ +static irqreturn_t inia100_intr(int irqno, void *devid) +{ + struct Scsi_Host *shost = (struct Scsi_Host *)devid; + struct orc_host *host = (struct orc_host *)shost->hostdata; + unsigned long flags; + irqreturn_t res; + + spin_lock_irqsave(shost->host_lock, flags); + res = orc_interrupt(host); + spin_unlock_irqrestore(shost->host_lock, flags); + + return res; +} + +static struct scsi_host_template inia100_template = { + .proc_name = "inia100", + .name = inia100_REVID, + .queuecommand = inia100_queue, + .eh_abort_handler = inia100_abort, + .eh_bus_reset_handler = inia100_bus_reset, + .eh_device_reset_handler = inia100_device_reset, + .can_queue = 1, + .this_id = 1, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 1, + .use_clustering = ENABLE_CLUSTERING, +}; + +static int inia100_probe_one(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct Scsi_Host *shost; + struct orc_host *host; + unsigned long port, bios; + int error = -ENODEV; + u32 sz; + unsigned long biosaddr; + char *bios_phys; + + if (pci_enable_device(pdev)) + goto out; + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { + printk(KERN_WARNING "Unable to set 32bit DMA " + "on inia100 adapter, ignoring.\n"); + goto out_disable_device; + } + + pci_set_master(pdev); + + port = pci_resource_start(pdev, 0); + if (!request_region(port, 256, "inia100")) { + printk(KERN_WARNING "inia100: io port 0x%lx, is busy.\n", port); + goto out_disable_device; + } + + /* <02> read from base address + 0x50 offset to get the bios value. */ + bios = inw(port + 0x50); + + + shost = scsi_host_alloc(&inia100_template, sizeof(struct orc_host)); + if (!shost) + goto out_release_region; + + host = (struct orc_host *)shost->hostdata; + host->pdev = pdev; + host->base = port; + host->BIOScfg = bios; + spin_lock_init(&host->allocation_lock); + + /* Get total memory needed for SCB */ + sz = ORC_MAXQUEUE * sizeof(struct orc_scb); + host->scb_virt = pci_zalloc_consistent(pdev, sz, &host->scb_phys); + if (!host->scb_virt) { + printk("inia100: SCB memory allocation error\n"); + goto out_host_put; + } + + /* Get total memory needed for ESCB */ + sz = ORC_MAXQUEUE * sizeof(struct orc_extended_scb); + host->escb_virt = pci_zalloc_consistent(pdev, sz, &host->escb_phys); + if (!host->escb_virt) { + printk("inia100: ESCB memory allocation error\n"); + goto out_free_scb_array; + } + + biosaddr = host->BIOScfg; + biosaddr = (biosaddr << 4); + bios_phys = phys_to_virt(biosaddr); + if (init_orchid(host)) { /* Initialize orchid chip */ + printk("inia100: initial orchid fail!!\n"); + goto out_free_escb_array; + } + + shost->io_port = host->base; + shost->n_io_port = 0xff; + shost->can_queue = ORC_MAXQUEUE; + shost->unique_id = shost->io_port; + shost->max_id = host->max_targets; + shost->max_lun = 16; + shost->irq = pdev->irq; + shost->this_id = host->scsi_id; /* Assign HCS index */ + shost->sg_tablesize = TOTAL_SG_ENTRY; + + /* Initial orc chip */ + error = request_irq(pdev->irq, inia100_intr, IRQF_SHARED, + "inia100", shost); + if (error < 0) { + printk(KERN_WARNING "inia100: unable to get irq %d\n", + pdev->irq); + goto out_free_escb_array; + } + + pci_set_drvdata(pdev, shost); + + error = scsi_add_host(shost, &pdev->dev); + if (error) + goto out_free_irq; + + scsi_scan_host(shost); + return 0; + +out_free_irq: + free_irq(shost->irq, shost); +out_free_escb_array: + pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_extended_scb), + host->escb_virt, host->escb_phys); +out_free_scb_array: + pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_scb), + host->scb_virt, host->scb_phys); +out_host_put: + scsi_host_put(shost); +out_release_region: + release_region(port, 256); +out_disable_device: + pci_disable_device(pdev); +out: + return error; +} + +static void inia100_remove_one(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct orc_host *host = (struct orc_host *)shost->hostdata; + + scsi_remove_host(shost); + + free_irq(shost->irq, shost); + pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_extended_scb), + host->escb_virt, host->escb_phys); + pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_scb), + host->scb_virt, host->scb_phys); + release_region(shost->io_port, 256); + + scsi_host_put(shost); +} + +static struct pci_device_id inia100_pci_tbl[] = { + {PCI_VENDOR_ID_INIT, 0x1060, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0,} +}; +MODULE_DEVICE_TABLE(pci, inia100_pci_tbl); + +static struct pci_driver inia100_pci_driver = { + .name = "inia100", + .id_table = inia100_pci_tbl, + .probe = inia100_probe_one, + .remove = inia100_remove_one, +}; + +static int __init inia100_init(void) +{ + return pci_register_driver(&inia100_pci_driver); +} + +static void __exit inia100_exit(void) +{ + pci_unregister_driver(&inia100_pci_driver); +} + +MODULE_DESCRIPTION("Initio A100U2W SCSI driver"); +MODULE_AUTHOR("Initio Corporation"); +MODULE_LICENSE("Dual BSD/GPL"); + +module_init(inia100_init); +module_exit(inia100_exit); |