summaryrefslogtreecommitdiff
path: root/drivers/scsi/a100u2w.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/a100u2w.c')
-rw-r--r--drivers/scsi/a100u2w.c1241
1 files changed, 1241 insertions, 0 deletions
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
new file mode 100644
index 000000000..7e33a61c1
--- /dev/null
+++ b/drivers/scsi/a100u2w.c
@@ -0,0 +1,1241 @@
+/*
+ * Initio A100 device driver for Linux.
+ *
+ * Copyright (c) 1994-1998 Initio Corporation
+ * Copyright (c) 2003-2004 Christoph Hellwig
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Revision History:
+ * 07/02/98 hl - v.91n Initial drivers.
+ * 09/14/98 hl - v1.01 Support new Kernel.
+ * 09/22/98 hl - v1.01a Support reset.
+ * 09/24/98 hl - v1.01b Fixed reset.
+ * 10/05/98 hl - v1.02 split the source code and release.
+ * 12/19/98 bv - v1.02a Use spinlocks for 2.1.95 and up
+ * 01/31/99 bv - v1.02b Use mdelay instead of waitForPause
+ * 08/08/99 bv - v1.02c Use waitForPause again.
+ * 06/25/02 Doug Ledford <dledford@redhat.com> - v1.02d
+ * - Remove limit on number of controllers
+ * - Port to DMA mapping API
+ * - Clean up interrupt handler registration
+ * - Fix memory leaks
+ * - Fix allocation of scsi host structs and private data
+ * 11/18/03 Christoph Hellwig <hch@lst.de>
+ * - Port to new probing API
+ * - Fix some more leaks in init failure cases
+ * 9/28/04 Christoph Hellwig <hch@lst.de>
+ * - merge the two source files
+ * - remove internal queueing code
+ * 14/06/07 Alan Cox <alan@lxorguk.ukuu.org.uk>
+ * - Grand cleanup and Linuxisation
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#include "a100u2w.h"
+
+
+static struct orc_scb *__orc_alloc_scb(struct orc_host * host);
+static void inia100_scb_handler(struct orc_host *host, struct orc_scb *scb);
+
+static struct orc_nvram nvram, *nvramp = &nvram;
+
+static u8 default_nvram[64] =
+{
+/*----------header -------------*/
+ 0x01, /* 0x00: Sub System Vendor ID 0 */
+ 0x11, /* 0x01: Sub System Vendor ID 1 */
+ 0x60, /* 0x02: Sub System ID 0 */
+ 0x10, /* 0x03: Sub System ID 1 */
+ 0x00, /* 0x04: SubClass */
+ 0x01, /* 0x05: Vendor ID 0 */
+ 0x11, /* 0x06: Vendor ID 1 */
+ 0x60, /* 0x07: Device ID 0 */
+ 0x10, /* 0x08: Device ID 1 */
+ 0x00, /* 0x09: Reserved */
+ 0x00, /* 0x0A: Reserved */
+ 0x01, /* 0x0B: Revision of Data Structure */
+ /* -- Host Adapter Structure --- */
+ 0x01, /* 0x0C: Number Of SCSI Channel */
+ 0x01, /* 0x0D: BIOS Configuration 1 */
+ 0x00, /* 0x0E: BIOS Configuration 2 */
+ 0x00, /* 0x0F: BIOS Configuration 3 */
+ /* --- SCSI Channel 0 Configuration --- */
+ 0x07, /* 0x10: H/A ID */
+ 0x83, /* 0x11: Channel Configuration */
+ 0x20, /* 0x12: MAX TAG per target */
+ 0x0A, /* 0x13: SCSI Reset Recovering time */
+ 0x00, /* 0x14: Channel Configuration4 */
+ 0x00, /* 0x15: Channel Configuration5 */
+ /* SCSI Channel 0 Target Configuration */
+ /* 0x16-0x25 */
+ 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+ 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+ /* --- SCSI Channel 1 Configuration --- */
+ 0x07, /* 0x26: H/A ID */
+ 0x83, /* 0x27: Channel Configuration */
+ 0x20, /* 0x28: MAX TAG per target */
+ 0x0A, /* 0x29: SCSI Reset Recovering time */
+ 0x00, /* 0x2A: Channel Configuration4 */
+ 0x00, /* 0x2B: Channel Configuration5 */
+ /* SCSI Channel 1 Target Configuration */
+ /* 0x2C-0x3B */
+ 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+ 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+ 0x00, /* 0x3C: Reserved */
+ 0x00, /* 0x3D: Reserved */
+ 0x00, /* 0x3E: Reserved */
+ 0x00 /* 0x3F: Checksum */
+};
+
+
+static u8 wait_chip_ready(struct orc_host * host)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
+ if (inb(host->base + ORC_HCTRL) & HOSTSTOP) /* Wait HOSTSTOP set */
+ return 1;
+ mdelay(100);
+ }
+ return 0;
+}
+
+static u8 wait_firmware_ready(struct orc_host * host)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
+ if (inb(host->base + ORC_HSTUS) & RREADY) /* Wait READY set */
+ return 1;
+ mdelay(100); /* wait 100ms before try again */
+ }
+ return 0;
+}
+
+/***************************************************************************/
+static u8 wait_scsi_reset_done(struct orc_host * host)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
+ if (!(inb(host->base + ORC_HCTRL) & SCSIRST)) /* Wait SCSIRST done */
+ return 1;
+ mdelay(100); /* wait 100ms before try again */
+ }
+ return 0;
+}
+
+/***************************************************************************/
+static u8 wait_HDO_off(struct orc_host * host)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
+ if (!(inb(host->base + ORC_HCTRL) & HDO)) /* Wait HDO off */
+ return 1;
+ mdelay(100); /* wait 100ms before try again */
+ }
+ return 0;
+}
+
+/***************************************************************************/
+static u8 wait_hdi_set(struct orc_host * host, u8 * data)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
+ if ((*data = inb(host->base + ORC_HSTUS)) & HDI)
+ return 1; /* Wait HDI set */
+ mdelay(100); /* wait 100ms before try again */
+ }
+ return 0;
+}
+
+/***************************************************************************/
+static unsigned short orc_read_fwrev(struct orc_host * host)
+{
+ u16 version;
+ u8 data;
+
+ outb(ORC_CMD_VERSION, host->base + ORC_HDATA);
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
+ return 0;
+
+ if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */
+ return 0;
+ version = inb(host->base + ORC_HDATA);
+ outb(data, host->base + ORC_HSTUS); /* Clear HDI */
+
+ if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */
+ return 0;
+ version |= inb(host->base + ORC_HDATA) << 8;
+ outb(data, host->base + ORC_HSTUS); /* Clear HDI */
+
+ return version;
+}
+
+/***************************************************************************/
+static u8 orc_nv_write(struct orc_host * host, unsigned char address, unsigned char value)
+{
+ outb(ORC_CMD_SET_NVM, host->base + ORC_HDATA); /* Write command */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
+ return 0;
+
+ outb(address, host->base + ORC_HDATA); /* Write address */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
+ return 0;
+
+ outb(value, host->base + ORC_HDATA); /* Write value */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
+ return 0;
+
+ return 1;
+}
+
+/***************************************************************************/
+static u8 orc_nv_read(struct orc_host * host, u8 address, u8 *ptr)
+{
+ unsigned char data;
+
+ outb(ORC_CMD_GET_NVM, host->base + ORC_HDATA); /* Write command */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
+ return 0;
+
+ outb(address, host->base + ORC_HDATA); /* Write address */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
+ return 0;
+
+ if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */
+ return 0;
+ *ptr = inb(host->base + ORC_HDATA);
+ outb(data, host->base + ORC_HSTUS); /* Clear HDI */
+
+ return 1;
+
+}
+
+/**
+ * orc_exec_sb - Queue an SCB with the HA
+ * @host: host adapter the SCB belongs to
+ * @scb: SCB to queue for execution
+ */
+
+static void orc_exec_scb(struct orc_host * host, struct orc_scb * scb)
+{
+ scb->status = ORCSCB_POST;
+ outb(scb->scbidx, host->base + ORC_PQUEUE);
+}
+
+
+/**
+ * se2_rd_all - read SCSI parameters from EEPROM
+ * @host: Host whose EEPROM is being loaded
+ *
+ * Read SCSI H/A configuration parameters from serial EEPROM
+ */
+
+static int se2_rd_all(struct orc_host * host)
+{
+ int i;
+ u8 *np, chksum = 0;
+
+ np = (u8 *) nvramp;
+ for (i = 0; i < 64; i++, np++) { /* <01> */
+ if (orc_nv_read(host, (u8) i, np) == 0)
+ return -1;
+ }
+
+ /*------ Is ckecksum ok ? ------*/
+ np = (u8 *) nvramp;
+ for (i = 0; i < 63; i++)
+ chksum += *np++;
+
+ if (nvramp->CheckSum != (u8) chksum)
+ return -1;
+ return 1;
+}
+
+/**
+ * se2_update_all - update the EEPROM
+ * @host: Host whose EEPROM is being updated
+ *
+ * Update changed bytes in the EEPROM image.
+ */
+
+static void se2_update_all(struct orc_host * host)
+{ /* setup default pattern */
+ int i;
+ u8 *np, *np1, chksum = 0;
+
+ /* Calculate checksum first */
+ np = (u8 *) default_nvram;
+ for (i = 0; i < 63; i++)
+ chksum += *np++;
+ *np = chksum;
+
+ np = (u8 *) default_nvram;
+ np1 = (u8 *) nvramp;
+ for (i = 0; i < 64; i++, np++, np1++) {
+ if (*np != *np1)
+ orc_nv_write(host, (u8) i, *np);
+ }
+}
+
+/**
+ * read_eeprom - load EEPROM
+ * @host: Host EEPROM to read
+ *
+ * Read the EEPROM for a given host. If it is invalid or fails
+ * the restore the defaults and use them.
+ */
+
+static void read_eeprom(struct orc_host * host)
+{
+ if (se2_rd_all(host) != 1) {
+ se2_update_all(host); /* setup default pattern */
+ se2_rd_all(host); /* load again */
+ }
+}
+
+
+/**
+ * orc_load_firmware - initialise firmware
+ * @host: Host to set up
+ *
+ * Load the firmware from the EEPROM into controller SRAM. This
+ * is basically a 4K block copy and then a 4K block read to check
+ * correctness. The rest is convulted by the indirect interfaces
+ * in the hardware
+ */
+
+static u8 orc_load_firmware(struct orc_host * host)
+{
+ u32 data32;
+ u16 bios_addr;
+ u16 i;
+ u8 *data32_ptr, data;
+
+
+ /* Set up the EEPROM for access */
+
+ data = inb(host->base + ORC_GCFG);
+ outb(data | EEPRG, host->base + ORC_GCFG); /* Enable EEPROM programming */
+ outb(0x00, host->base + ORC_EBIOSADR2);
+ outw(0x0000, host->base + ORC_EBIOSADR0);
+ if (inb(host->base + ORC_EBIOSDATA) != 0x55) {
+ outb(data, host->base + ORC_GCFG); /* Disable EEPROM programming */
+ return 0;
+ }
+ outw(0x0001, host->base + ORC_EBIOSADR0);
+ if (inb(host->base + ORC_EBIOSDATA) != 0xAA) {
+ outb(data, host->base + ORC_GCFG); /* Disable EEPROM programming */
+ return 0;
+ }
+
+ outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Enable SRAM programming */
+ data32_ptr = (u8 *) & data32;
+ data32 = cpu_to_le32(0); /* Initial FW address to 0 */
+ outw(0x0010, host->base + ORC_EBIOSADR0);
+ *data32_ptr = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */
+ outw(0x0011, host->base + ORC_EBIOSADR0);
+ *(data32_ptr + 1) = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */
+ outw(0x0012, host->base + ORC_EBIOSADR0);
+ *(data32_ptr + 2) = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */
+ outw(*(data32_ptr + 2), host->base + ORC_EBIOSADR2);
+ outl(le32_to_cpu(data32), host->base + ORC_FWBASEADR); /* Write FW address */
+
+ /* Copy the code from the BIOS to the SRAM */
+
+ udelay(500); /* Required on Sun Ultra 5 ... 350 -> failures */
+ bios_addr = (u16) le32_to_cpu(data32); /* FW code locate at BIOS address + ? */
+ for (i = 0, data32_ptr = (u8 *) & data32; /* Download the code */
+ i < 0x1000; /* Firmware code size = 4K */
+ i++, bios_addr++) {
+ outw(bios_addr, host->base + ORC_EBIOSADR0);
+ *data32_ptr++ = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */
+ if ((i % 4) == 3) {
+ outl(le32_to_cpu(data32), host->base + ORC_RISCRAM); /* Write every 4 bytes */
+ data32_ptr = (u8 *) & data32;
+ }
+ }
+
+ /* Go back and check they match */
+
+ outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Reset program count 0 */
+ bios_addr -= 0x1000; /* Reset the BIOS address */
+ for (i = 0, data32_ptr = (u8 *) & data32; /* Check the code */
+ i < 0x1000; /* Firmware code size = 4K */
+ i++, bios_addr++) {
+ outw(bios_addr, host->base + ORC_EBIOSADR0);
+ *data32_ptr++ = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */
+ if ((i % 4) == 3) {
+ if (inl(host->base + ORC_RISCRAM) != le32_to_cpu(data32)) {
+ outb(PRGMRST, host->base + ORC_RISCCTL); /* Reset program to 0 */
+ outb(data, host->base + ORC_GCFG); /*Disable EEPROM programming */
+ return 0;
+ }
+ data32_ptr = (u8 *) & data32;
+ }
+ }
+
+ /* Success */
+ outb(PRGMRST, host->base + ORC_RISCCTL); /* Reset program to 0 */
+ outb(data, host->base + ORC_GCFG); /* Disable EEPROM programming */
+ return 1;
+}
+
+/***************************************************************************/
+static void setup_SCBs(struct orc_host * host)
+{
+ struct orc_scb *scb;
+ int i;
+ struct orc_extended_scb *escb;
+ dma_addr_t escb_phys;
+
+ /* Setup SCB base and SCB Size registers */
+ outb(ORC_MAXQUEUE, host->base + ORC_SCBSIZE); /* Total number of SCBs */
+ /* SCB base address 0 */
+ outl(host->scb_phys, host->base + ORC_SCBBASE0);
+ /* SCB base address 1 */
+ outl(host->scb_phys, host->base + ORC_SCBBASE1);
+
+ /* setup scatter list address with one buffer */
+ scb = host->scb_virt;
+ escb = host->escb_virt;
+
+ for (i = 0; i < ORC_MAXQUEUE; i++) {
+ escb_phys = (host->escb_phys + (sizeof(struct orc_extended_scb) * i));
+ scb->sg_addr = cpu_to_le32((u32) escb_phys);
+ scb->sense_addr = cpu_to_le32((u32) escb_phys);
+ scb->escb = escb;
+ scb->scbidx = i;
+ scb++;
+ escb++;
+ }
+}
+
+/**
+ * init_alloc_map - initialise allocation map
+ * @host: host map to configure
+ *
+ * Initialise the allocation maps for this device. If the device
+ * is not quiescent the caller must hold the allocation lock
+ */
+
+static void init_alloc_map(struct orc_host * host)
+{
+ u8 i, j;
+
+ for (i = 0; i < MAX_CHANNELS; i++) {
+ for (j = 0; j < 8; j++) {
+ host->allocation_map[i][j] = 0xffffffff;
+ }
+ }
+}
+
+/**
+ * init_orchid - initialise the host adapter
+ * @host:host adapter to initialise
+ *
+ * Initialise the controller and if necessary load the firmware.
+ *
+ * Returns -1 if the initialisation fails.
+ */
+
+static int init_orchid(struct orc_host * host)
+{
+ u8 *ptr;
+ u16 revision;
+ u8 i;
+
+ init_alloc_map(host);
+ outb(0xFF, host->base + ORC_GIMSK); /* Disable all interrupts */
+
+ if (inb(host->base + ORC_HSTUS) & RREADY) { /* Orchid is ready */
+ revision = orc_read_fwrev(host);
+ if (revision == 0xFFFF) {
+ outb(DEVRST, host->base + ORC_HCTRL); /* Reset Host Adapter */
+ if (wait_chip_ready(host) == 0)
+ return -1;
+ orc_load_firmware(host); /* Download FW */
+ setup_SCBs(host); /* Setup SCB base and SCB Size registers */
+ outb(0x00, host->base + ORC_HCTRL); /* clear HOSTSTOP */
+ if (wait_firmware_ready(host) == 0)
+ return -1;
+ /* Wait for firmware ready */
+ } else {
+ setup_SCBs(host); /* Setup SCB base and SCB Size registers */
+ }
+ } else { /* Orchid is not Ready */
+ outb(DEVRST, host->base + ORC_HCTRL); /* Reset Host Adapter */
+ if (wait_chip_ready(host) == 0)
+ return -1;
+ orc_load_firmware(host); /* Download FW */
+ setup_SCBs(host); /* Setup SCB base and SCB Size registers */
+ outb(HDO, host->base + ORC_HCTRL); /* Do Hardware Reset & */
+
+ /* clear HOSTSTOP */
+ if (wait_firmware_ready(host) == 0) /* Wait for firmware ready */
+ return -1;
+ }
+
+ /* Load an EEProm copy into RAM */
+ /* Assumes single threaded at this point */
+ read_eeprom(host);
+
+ if (nvramp->revision != 1)
+ return -1;
+
+ host->scsi_id = nvramp->scsi_id;
+ host->BIOScfg = nvramp->BIOSConfig1;
+ host->max_targets = MAX_TARGETS;
+ ptr = (u8 *) & (nvramp->Target00Config);
+ for (i = 0; i < 16; ptr++, i++) {
+ host->target_flag[i] = *ptr;
+ host->max_tags[i] = ORC_MAXTAGS;
+ }
+
+ if (nvramp->SCSI0Config & NCC_BUSRESET)
+ host->flags |= HCF_SCSI_RESET;
+ outb(0xFB, host->base + ORC_GIMSK); /* enable RP FIFO interrupt */
+ return 0;
+}
+
+/**
+ * orc_reset_scsi_bus - perform bus reset
+ * @host: host being reset
+ *
+ * Perform a full bus reset on the adapter.
+ */
+
+static int orc_reset_scsi_bus(struct orc_host * host)
+{ /* I need Host Control Block Information */
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->allocation_lock, flags);
+
+ init_alloc_map(host);
+ /* reset scsi bus */
+ outb(SCSIRST, host->base + ORC_HCTRL);
+ /* FIXME: We can spend up to a second with the lock held and
+ interrupts off here */
+ if (wait_scsi_reset_done(host) == 0) {
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
+ return FAILED;
+ } else {
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
+ return SUCCESS;
+ }
+}
+
+/**
+ * orc_device_reset - device reset handler
+ * @host: host to reset
+ * @cmd: command causing the reset
+ * @target; target device
+ *
+ * Reset registers, reset a hanging bus and kill active and disconnected
+ * commands for target w/o soft reset
+ */
+
+static int orc_device_reset(struct orc_host * host, struct scsi_cmnd *cmd, unsigned int target)
+{ /* I need Host Control Block Information */
+ struct orc_scb *scb;
+ struct orc_extended_scb *escb;
+ struct orc_scb *host_scb;
+ u8 i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&(host->allocation_lock), flags);
+ scb = (struct orc_scb *) NULL;
+ escb = (struct orc_extended_scb *) NULL;
+
+ /* setup scatter list address with one buffer */
+ host_scb = host->scb_virt;
+
+ /* FIXME: is this safe if we then fail to issue the reset or race
+ a completion ? */
+ init_alloc_map(host);
+
+ /* Find the scb corresponding to the command */
+ for (i = 0; i < ORC_MAXQUEUE; i++) {
+ escb = host_scb->escb;
+ if (host_scb->status && escb->srb == cmd)
+ break;
+ host_scb++;
+ }
+
+ if (i == ORC_MAXQUEUE) {
+ printk(KERN_ERR "Unable to Reset - No SCB Found\n");
+ spin_unlock_irqrestore(&(host->allocation_lock), flags);
+ return FAILED;
+ }
+
+ /* Allocate a new SCB for the reset command to the firmware */
+ if ((scb = __orc_alloc_scb(host)) == NULL) {
+ /* Can't happen.. */
+ spin_unlock_irqrestore(&(host->allocation_lock), flags);
+ return FAILED;
+ }
+
+ /* Reset device is handled by the firmware, we fill in an SCB and
+ fire it at the controller, it does the rest */
+ scb->opcode = ORC_BUSDEVRST;
+ scb->target = target;
+ scb->hastat = 0;
+ scb->tastat = 0;
+ scb->status = 0x0;
+ scb->link = 0xFF;
+ scb->reserved0 = 0;
+ scb->reserved1 = 0;
+ scb->xferlen = cpu_to_le32(0);
+ scb->sg_len = cpu_to_le32(0);
+
+ escb->srb = NULL;
+ escb->srb = cmd;
+ orc_exec_scb(host, scb); /* Start execute SCB */
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
+ return SUCCESS;
+}
+
+/**
+ * __orc_alloc_scb - allocate an SCB
+ * @host: host to allocate from
+ *
+ * Allocate an SCB and return a pointer to the SCB object. NULL
+ * is returned if no SCB is free. The caller must already hold
+ * the allocator lock at this point.
+ */
+
+
+static struct orc_scb *__orc_alloc_scb(struct orc_host * host)
+{
+ u8 channel;
+ unsigned long idx;
+ u8 index;
+ u8 i;
+
+ channel = host->index;
+ for (i = 0; i < 8; i++) {
+ for (index = 0; index < 32; index++) {
+ if ((host->allocation_map[channel][i] >> index) & 0x01) {
+ host->allocation_map[channel][i] &= ~(1 << index);
+ idx = index + 32 * i;
+ /*
+ * Translate the index to a structure instance
+ */
+ return host->scb_virt + idx;
+ }
+ }
+ }
+ return NULL;
+}
+
+/**
+ * orc_alloc_scb - allocate an SCB
+ * @host: host to allocate from
+ *
+ * Allocate an SCB and return a pointer to the SCB object. NULL
+ * is returned if no SCB is free.
+ */
+
+static struct orc_scb *orc_alloc_scb(struct orc_host * host)
+{
+ struct orc_scb *scb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->allocation_lock, flags);
+ scb = __orc_alloc_scb(host);
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
+ return scb;
+}
+
+/**
+ * orc_release_scb - release an SCB
+ * @host: host owning the SCB
+ * @scb: SCB that is now free
+ *
+ * Called to return a completed SCB to the allocation pool. Before
+ * calling the SCB must be out of use on both the host and the HA.
+ */
+
+static void orc_release_scb(struct orc_host *host, struct orc_scb *scb)
+{
+ unsigned long flags;
+ u8 index, i, channel;
+
+ spin_lock_irqsave(&(host->allocation_lock), flags);
+ channel = host->index; /* Channel */
+ index = scb->scbidx;
+ i = index / 32;
+ index %= 32;
+ host->allocation_map[channel][i] |= (1 << index);
+ spin_unlock_irqrestore(&(host->allocation_lock), flags);
+}
+
+/**
+ * orchid_abort_scb - abort a command
+ *
+ * Abort a queued command that has been passed to the firmware layer
+ * if possible. This is all handled by the firmware. We aks the firmware
+ * and it either aborts the command or fails
+ */
+
+static int orchid_abort_scb(struct orc_host * host, struct orc_scb * scb)
+{
+ unsigned char data, status;
+
+ outb(ORC_CMD_ABORT_SCB, host->base + ORC_HDATA); /* Write command */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
+ return 0;
+
+ outb(scb->scbidx, host->base + ORC_HDATA); /* Write address */
+ outb(HDO, host->base + ORC_HCTRL);
+ if (wait_HDO_off(host) == 0) /* Wait HDO off */
+ return 0;
+
+ if (wait_hdi_set(host, &data) == 0) /* Wait HDI set */
+ return 0;
+ status = inb(host->base + ORC_HDATA);
+ outb(data, host->base + ORC_HSTUS); /* Clear HDI */
+
+ if (status == 1) /* 0 - Successfully */
+ return 0; /* 1 - Fail */
+ return 1;
+}
+
+static int inia100_abort_cmd(struct orc_host * host, struct scsi_cmnd *cmd)
+{
+ struct orc_extended_scb *escb;
+ struct orc_scb *scb;
+ u8 i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&(host->allocation_lock), flags);
+
+ scb = host->scb_virt;
+
+ /* Walk the queue until we find the SCB that belongs to the command
+ block. This isn't a performance critical path so a walk in the park
+ here does no harm */
+
+ for (i = 0; i < ORC_MAXQUEUE; i++, scb++) {
+ escb = scb->escb;
+ if (scb->status && escb->srb == cmd) {
+ if (scb->tag_msg == 0) {
+ goto out;
+ } else {
+ /* Issue an ABORT to the firmware */
+ if (orchid_abort_scb(host, scb)) {
+ escb->srb = NULL;
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
+ return SUCCESS;
+ } else
+ goto out;
+ }
+ }
+ }
+out:
+ spin_unlock_irqrestore(&host->allocation_lock, flags);
+ return FAILED;
+}
+
+/**
+ * orc_interrupt - IRQ processing
+ * @host: Host causing the interrupt
+ *
+ * This function is called from the IRQ handler and protected
+ * by the host lock. While the controller reports that there are
+ * scb's for processing we pull them off the controller, turn the
+ * index into a host address pointer to the scb and call the scb
+ * handler.
+ *
+ * Returns IRQ_HANDLED if any SCBs were processed, IRQ_NONE otherwise
+ */
+
+static irqreturn_t orc_interrupt(struct orc_host * host)
+{
+ u8 scb_index;
+ struct orc_scb *scb;
+
+ /* Check if we have an SCB queued for servicing */
+ if (inb(host->base + ORC_RQUEUECNT) == 0)
+ return IRQ_NONE;
+
+ do {
+ /* Get the SCB index of the SCB to service */
+ scb_index = inb(host->base + ORC_RQUEUE);
+
+ /* Translate it back to a host pointer */
+ scb = (struct orc_scb *) ((unsigned long) host->scb_virt + (unsigned long) (sizeof(struct orc_scb) * scb_index));
+ scb->status = 0x0;
+ /* Process the SCB */
+ inia100_scb_handler(host, scb);
+ } while (inb(host->base + ORC_RQUEUECNT));
+ return IRQ_HANDLED;
+} /* End of I1060Interrupt() */
+
+/**
+ * inia100_build_scb - build SCB
+ * @host: host owing the control block
+ * @scb: control block to use
+ * @cmd: Mid layer command
+ *
+ * Build a host adapter control block from the SCSI mid layer command
+ */
+
+static int inia100_build_scb(struct orc_host * host, struct orc_scb * scb, struct scsi_cmnd * cmd)
+{ /* Create corresponding SCB */
+ struct scatterlist *sg;
+ struct orc_sgent *sgent; /* Pointer to SG list */
+ int i, count_sg;
+ struct orc_extended_scb *escb;
+
+ /* Links between the escb, scb and Linux scsi midlayer cmd */
+ escb = scb->escb;
+ escb->srb = cmd;
+ sgent = NULL;
+
+ /* Set up the SCB to do a SCSI command block */
+ scb->opcode = ORC_EXECSCSI;
+ scb->flags = SCF_NO_DCHK; /* Clear done bit */
+ scb->target = cmd->device->id;
+ scb->lun = cmd->device->lun;
+ scb->reserved0 = 0;
+ scb->reserved1 = 0;
+ scb->sg_len = cpu_to_le32(0);
+
+ scb->xferlen = cpu_to_le32((u32) scsi_bufflen(cmd));
+ sgent = (struct orc_sgent *) & escb->sglist[0];
+
+ count_sg = scsi_dma_map(cmd);
+ if (count_sg < 0)
+ return count_sg;
+ BUG_ON(count_sg > TOTAL_SG_ENTRY);
+
+ /* Build the scatter gather lists */
+ if (count_sg) {
+ scb->sg_len = cpu_to_le32((u32) (count_sg * 8));
+ scsi_for_each_sg(cmd, sg, count_sg, i) {
+ sgent->base = cpu_to_le32((u32) sg_dma_address(sg));
+ sgent->length = cpu_to_le32((u32) sg_dma_len(sg));
+ sgent++;
+ }
+ } else {
+ scb->sg_len = cpu_to_le32(0);
+ sgent->base = cpu_to_le32(0);
+ sgent->length = cpu_to_le32(0);
+ }
+ scb->sg_addr = (u32) scb->sense_addr; /* sense_addr is already little endian */
+ scb->hastat = 0;
+ scb->tastat = 0;
+ scb->link = 0xFF;
+ scb->sense_len = SENSE_SIZE;
+ scb->cdb_len = cmd->cmd_len;
+ if (scb->cdb_len >= IMAX_CDB) {
+ printk("max cdb length= %x\b", cmd->cmd_len);
+ scb->cdb_len = IMAX_CDB;
+ }
+ scb->ident = (u8)(cmd->device->lun & 0xff) | DISC_ALLOW;
+ if (cmd->device->tagged_supported) { /* Tag Support */
+ scb->tag_msg = SIMPLE_QUEUE_TAG; /* Do simple tag only */
+ } else {
+ scb->tag_msg = 0; /* No tag support */
+ }
+ memcpy(scb->cdb, cmd->cmnd, scb->cdb_len);
+ return 0;
+}
+
+/**
+ * inia100_queue - queue command with host
+ * @cmd: Command block
+ * @done: Completion function
+ *
+ * Called by the mid layer to queue a command. Process the command
+ * block, build the host specific scb structures and if there is room
+ * queue the command down to the controller
+ */
+
+static int inia100_queue_lck(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
+{
+ struct orc_scb *scb;
+ struct orc_host *host; /* Point to Host adapter control block */
+
+ host = (struct orc_host *) cmd->device->host->hostdata;
+ cmd->scsi_done = done;
+ /* Get free SCSI control block */
+ if ((scb = orc_alloc_scb(host)) == NULL)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ if (inia100_build_scb(host, scb, cmd)) {
+ orc_release_scb(host, scb);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+ orc_exec_scb(host, scb); /* Start execute SCB */
+ return 0;
+}
+
+static DEF_SCSI_QCMD(inia100_queue)
+
+/*****************************************************************************
+ Function name : inia100_abort
+ Description : Abort a queued command.
+ (commands that are on the bus can't be aborted easily)
+ Input : host - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static int inia100_abort(struct scsi_cmnd * cmd)
+{
+ struct orc_host *host;
+
+ host = (struct orc_host *) cmd->device->host->hostdata;
+ return inia100_abort_cmd(host, cmd);
+}
+
+/*****************************************************************************
+ Function name : inia100_reset
+ Description : Reset registers, reset a hanging bus and
+ kill active and disconnected commands for target w/o soft reset
+ Input : host - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static int inia100_bus_reset(struct scsi_cmnd * cmd)
+{ /* I need Host Control Block Information */
+ struct orc_host *host;
+ host = (struct orc_host *) cmd->device->host->hostdata;
+ return orc_reset_scsi_bus(host);
+}
+
+/*****************************************************************************
+ Function name : inia100_device_reset
+ Description : Reset the device
+ Input : host - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static int inia100_device_reset(struct scsi_cmnd * cmd)
+{ /* I need Host Control Block Information */
+ struct orc_host *host;
+ host = (struct orc_host *) cmd->device->host->hostdata;
+ return orc_device_reset(host, cmd, scmd_id(cmd));
+
+}
+
+/**
+ * inia100_scb_handler - interrupt callback
+ * @host: Host causing the interrupt
+ * @scb: SCB the controller returned as needing processing
+ *
+ * Perform completion processing on a control block. Do the conversions
+ * from host to SCSI midlayer error coding, save any sense data and
+ * the complete with the midlayer and recycle the scb.
+ */
+
+static void inia100_scb_handler(struct orc_host *host, struct orc_scb *scb)
+{
+ struct scsi_cmnd *cmd; /* Pointer to SCSI request block */
+ struct orc_extended_scb *escb;
+
+ escb = scb->escb;
+ if ((cmd = (struct scsi_cmnd *) escb->srb) == NULL) {
+ printk(KERN_ERR "inia100_scb_handler: SRB pointer is empty\n");
+ orc_release_scb(host, scb); /* Release SCB for current channel */
+ return;
+ }
+ escb->srb = NULL;
+
+ switch (scb->hastat) {
+ case 0x0:
+ case 0xa: /* Linked command complete without error and linked normally */
+ case 0xb: /* Linked command complete without error interrupt generated */
+ scb->hastat = 0;
+ break;
+
+ case 0x11: /* Selection time out-The initiator selection or target
+ reselection was not complete within the SCSI Time out period */
+ scb->hastat = DID_TIME_OUT;
+ break;
+
+ case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus
+ phase sequence was requested by the target. The host adapter
+ will generate a SCSI Reset Condition, notifying the host with
+ a SCRD interrupt */
+ scb->hastat = DID_RESET;
+ break;
+
+ case 0x1a: /* SCB Aborted. 07/21/98 */
+ scb->hastat = DID_ABORT;
+ break;
+
+ case 0x12: /* Data overrun/underrun-The target attempted to transfer more data
+ than was allocated by the Data Length field or the sum of the
+ Scatter / Gather Data Length fields. */
+ case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
+ case 0x16: /* Invalid CCB Operation Code-The first byte of the CCB was invalid. */
+
+ default:
+ printk(KERN_DEBUG "inia100: %x %x\n", scb->hastat, scb->tastat);
+ scb->hastat = DID_ERROR; /* Couldn't find any better */
+ break;
+ }
+
+ if (scb->tastat == 2) { /* Check condition */
+ memcpy((unsigned char *) &cmd->sense_buffer[0],
+ (unsigned char *) &escb->sglist[0], SENSE_SIZE);
+ }
+ cmd->result = scb->tastat | (scb->hastat << 16);
+ scsi_dma_unmap(cmd);
+ cmd->scsi_done(cmd); /* Notify system DONE */
+ orc_release_scb(host, scb); /* Release SCB for current channel */
+}
+
+/**
+ * inia100_intr - interrupt handler
+ * @irqno: Interrupt value
+ * @devid: Host adapter
+ *
+ * Entry point for IRQ handling. All the real work is performed
+ * by orc_interrupt.
+ */
+static irqreturn_t inia100_intr(int irqno, void *devid)
+{
+ struct Scsi_Host *shost = (struct Scsi_Host *)devid;
+ struct orc_host *host = (struct orc_host *)shost->hostdata;
+ unsigned long flags;
+ irqreturn_t res;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ res = orc_interrupt(host);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ return res;
+}
+
+static struct scsi_host_template inia100_template = {
+ .proc_name = "inia100",
+ .name = inia100_REVID,
+ .queuecommand = inia100_queue,
+ .eh_abort_handler = inia100_abort,
+ .eh_bus_reset_handler = inia100_bus_reset,
+ .eh_device_reset_handler = inia100_device_reset,
+ .can_queue = 1,
+ .this_id = 1,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 1,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+static int inia100_probe_one(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct Scsi_Host *shost;
+ struct orc_host *host;
+ unsigned long port, bios;
+ int error = -ENODEV;
+ u32 sz;
+ unsigned long biosaddr;
+ char *bios_phys;
+
+ if (pci_enable_device(pdev))
+ goto out;
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ printk(KERN_WARNING "Unable to set 32bit DMA "
+ "on inia100 adapter, ignoring.\n");
+ goto out_disable_device;
+ }
+
+ pci_set_master(pdev);
+
+ port = pci_resource_start(pdev, 0);
+ if (!request_region(port, 256, "inia100")) {
+ printk(KERN_WARNING "inia100: io port 0x%lx, is busy.\n", port);
+ goto out_disable_device;
+ }
+
+ /* <02> read from base address + 0x50 offset to get the bios value. */
+ bios = inw(port + 0x50);
+
+
+ shost = scsi_host_alloc(&inia100_template, sizeof(struct orc_host));
+ if (!shost)
+ goto out_release_region;
+
+ host = (struct orc_host *)shost->hostdata;
+ host->pdev = pdev;
+ host->base = port;
+ host->BIOScfg = bios;
+ spin_lock_init(&host->allocation_lock);
+
+ /* Get total memory needed for SCB */
+ sz = ORC_MAXQUEUE * sizeof(struct orc_scb);
+ host->scb_virt = pci_zalloc_consistent(pdev, sz, &host->scb_phys);
+ if (!host->scb_virt) {
+ printk("inia100: SCB memory allocation error\n");
+ goto out_host_put;
+ }
+
+ /* Get total memory needed for ESCB */
+ sz = ORC_MAXQUEUE * sizeof(struct orc_extended_scb);
+ host->escb_virt = pci_zalloc_consistent(pdev, sz, &host->escb_phys);
+ if (!host->escb_virt) {
+ printk("inia100: ESCB memory allocation error\n");
+ goto out_free_scb_array;
+ }
+
+ biosaddr = host->BIOScfg;
+ biosaddr = (biosaddr << 4);
+ bios_phys = phys_to_virt(biosaddr);
+ if (init_orchid(host)) { /* Initialize orchid chip */
+ printk("inia100: initial orchid fail!!\n");
+ goto out_free_escb_array;
+ }
+
+ shost->io_port = host->base;
+ shost->n_io_port = 0xff;
+ shost->can_queue = ORC_MAXQUEUE;
+ shost->unique_id = shost->io_port;
+ shost->max_id = host->max_targets;
+ shost->max_lun = 16;
+ shost->irq = pdev->irq;
+ shost->this_id = host->scsi_id; /* Assign HCS index */
+ shost->sg_tablesize = TOTAL_SG_ENTRY;
+
+ /* Initial orc chip */
+ error = request_irq(pdev->irq, inia100_intr, IRQF_SHARED,
+ "inia100", shost);
+ if (error < 0) {
+ printk(KERN_WARNING "inia100: unable to get irq %d\n",
+ pdev->irq);
+ goto out_free_escb_array;
+ }
+
+ pci_set_drvdata(pdev, shost);
+
+ error = scsi_add_host(shost, &pdev->dev);
+ if (error)
+ goto out_free_irq;
+
+ scsi_scan_host(shost);
+ return 0;
+
+out_free_irq:
+ free_irq(shost->irq, shost);
+out_free_escb_array:
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_extended_scb),
+ host->escb_virt, host->escb_phys);
+out_free_scb_array:
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_scb),
+ host->scb_virt, host->scb_phys);
+out_host_put:
+ scsi_host_put(shost);
+out_release_region:
+ release_region(port, 256);
+out_disable_device:
+ pci_disable_device(pdev);
+out:
+ return error;
+}
+
+static void inia100_remove_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct orc_host *host = (struct orc_host *)shost->hostdata;
+
+ scsi_remove_host(shost);
+
+ free_irq(shost->irq, shost);
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_extended_scb),
+ host->escb_virt, host->escb_phys);
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_scb),
+ host->scb_virt, host->scb_phys);
+ release_region(shost->io_port, 256);
+
+ scsi_host_put(shost);
+}
+
+static struct pci_device_id inia100_pci_tbl[] = {
+ {PCI_VENDOR_ID_INIT, 0x1060, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {0,}
+};
+MODULE_DEVICE_TABLE(pci, inia100_pci_tbl);
+
+static struct pci_driver inia100_pci_driver = {
+ .name = "inia100",
+ .id_table = inia100_pci_tbl,
+ .probe = inia100_probe_one,
+ .remove = inia100_remove_one,
+};
+
+static int __init inia100_init(void)
+{
+ return pci_register_driver(&inia100_pci_driver);
+}
+
+static void __exit inia100_exit(void)
+{
+ pci_unregister_driver(&inia100_pci_driver);
+}
+
+MODULE_DESCRIPTION("Initio A100U2W SCSI driver");
+MODULE_AUTHOR("Initio Corporation");
+MODULE_LICENSE("Dual BSD/GPL");
+
+module_init(inia100_init);
+module_exit(inia100_exit);