diff options
Diffstat (limited to 'drivers/scsi/aacraid/src.c')
| -rw-r--r-- | drivers/scsi/aacraid/src.c | 1063 |
1 files changed, 1063 insertions, 0 deletions
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c new file mode 100644 index 000000000..4596e9dd7 --- /dev/null +++ b/drivers/scsi/aacraid/src.c @@ -0,0 +1,1063 @@ +/* + * Adaptec AAC series RAID controller driver + * (c) Copyright 2001 Red Hat Inc. + * + * based on the old aacraid driver that is.. + * Adaptec aacraid device driver for Linux. + * + * Copyright (c) 2000-2010 Adaptec, Inc. + * 2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Module Name: + * src.c + * + * Abstract: Hardware Device Interface for PMC SRC based controllers + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/completion.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <scsi/scsi_host.h> + +#include "aacraid.h" + +static int aac_src_get_sync_status(struct aac_dev *dev); + +irqreturn_t aac_src_intr_message(int irq, void *dev_id) +{ + struct aac_msix_ctx *ctx; + struct aac_dev *dev; + unsigned long bellbits, bellbits_shifted; + int vector_no; + int isFastResponse, mode; + u32 index, handle; + + ctx = (struct aac_msix_ctx *)dev_id; + dev = ctx->dev; + vector_no = ctx->vector_no; + + if (dev->msi_enabled) { + mode = AAC_INT_MODE_MSI; + if (vector_no == 0) { + bellbits = src_readl(dev, MUnit.ODR_MSI); + if (bellbits & 0x40000) + mode |= AAC_INT_MODE_AIF; + if (bellbits & 0x1000) + mode |= AAC_INT_MODE_SYNC; + } + } else { + mode = AAC_INT_MODE_INTX; + bellbits = src_readl(dev, MUnit.ODR_R); + if (bellbits & PmDoorBellResponseSent) { + bellbits = PmDoorBellResponseSent; + src_writel(dev, MUnit.ODR_C, bellbits); + src_readl(dev, MUnit.ODR_C); + } else { + bellbits_shifted = (bellbits >> SRC_ODR_SHIFT); + src_writel(dev, MUnit.ODR_C, bellbits); + src_readl(dev, MUnit.ODR_C); + + if (bellbits_shifted & DoorBellAifPending) + mode |= AAC_INT_MODE_AIF; + else if (bellbits_shifted & OUTBOUNDDOORBELL_0) + mode |= AAC_INT_MODE_SYNC; + } + } + + if (mode & AAC_INT_MODE_SYNC) { + unsigned long sflags; + struct list_head *entry; + int send_it = 0; + extern int aac_sync_mode; + + if (!aac_sync_mode && !dev->msi_enabled) { + src_writel(dev, MUnit.ODR_C, bellbits); + src_readl(dev, MUnit.ODR_C); + } + + if (dev->sync_fib) { + if (dev->sync_fib->callback) + dev->sync_fib->callback(dev->sync_fib->callback_data, + dev->sync_fib); + spin_lock_irqsave(&dev->sync_fib->event_lock, sflags); + if (dev->sync_fib->flags & FIB_CONTEXT_FLAG_WAIT) { + dev->management_fib_count--; + up(&dev->sync_fib->event_wait); + } + spin_unlock_irqrestore(&dev->sync_fib->event_lock, + sflags); + spin_lock_irqsave(&dev->sync_lock, sflags); + if (!list_empty(&dev->sync_fib_list)) { + entry = dev->sync_fib_list.next; + dev->sync_fib = list_entry(entry, + struct fib, + fiblink); + list_del(entry); + send_it = 1; + } else { + dev->sync_fib = NULL; + } + spin_unlock_irqrestore(&dev->sync_lock, sflags); + if (send_it) { + aac_adapter_sync_cmd(dev, SEND_SYNCHRONOUS_FIB, + (u32)dev->sync_fib->hw_fib_pa, + 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); + } + } + if (!dev->msi_enabled) + mode = 0; + + } + + if (mode & AAC_INT_MODE_AIF) { + /* handle AIF */ + aac_intr_normal(dev, 0, 2, 0, NULL); + if (dev->msi_enabled) + aac_src_access_devreg(dev, AAC_CLEAR_AIF_BIT); + mode = 0; + } + + if (mode) { + index = dev->host_rrq_idx[vector_no]; + + for (;;) { + isFastResponse = 0; + /* remove toggle bit (31) */ + handle = (dev->host_rrq[index] & 0x7fffffff); + /* check fast response bit (30) */ + if (handle & 0x40000000) + isFastResponse = 1; + handle &= 0x0000ffff; + if (handle == 0) + break; + if (dev->msi_enabled && dev->max_msix > 1) + atomic_dec(&dev->rrq_outstanding[vector_no]); + aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL); + dev->host_rrq[index++] = 0; + if (index == (vector_no + 1) * dev->vector_cap) + index = vector_no * dev->vector_cap; + dev->host_rrq_idx[vector_no] = index; + } + mode = 0; + } + + return IRQ_HANDLED; +} + +/** + * aac_src_disable_interrupt - Disable interrupts + * @dev: Adapter + */ + +static void aac_src_disable_interrupt(struct aac_dev *dev) +{ + src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff); +} + +/** + * aac_src_enable_interrupt_message - Enable interrupts + * @dev: Adapter + */ + +static void aac_src_enable_interrupt_message(struct aac_dev *dev) +{ + aac_src_access_devreg(dev, AAC_ENABLE_INTERRUPT); +} + +/** + * src_sync_cmd - send a command and wait + * @dev: Adapter + * @command: Command to execute + * @p1: first parameter + * @ret: adapter status + * + * This routine will send a synchronous command to the adapter and wait + * for its completion. + */ + +static int src_sync_cmd(struct aac_dev *dev, u32 command, + u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, + u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4) +{ + unsigned long start; + unsigned long delay; + int ok; + + /* + * Write the command into Mailbox 0 + */ + writel(command, &dev->IndexRegs->Mailbox[0]); + /* + * Write the parameters into Mailboxes 1 - 6 + */ + writel(p1, &dev->IndexRegs->Mailbox[1]); + writel(p2, &dev->IndexRegs->Mailbox[2]); + writel(p3, &dev->IndexRegs->Mailbox[3]); + writel(p4, &dev->IndexRegs->Mailbox[4]); + + /* + * Clear the synch command doorbell to start on a clean slate. + */ + if (!dev->msi_enabled) + src_writel(dev, + MUnit.ODR_C, + OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT); + + /* + * Disable doorbell interrupts + */ + src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff); + + /* + * Force the completion of the mask register write before issuing + * the interrupt. + */ + src_readl(dev, MUnit.OIMR); + + /* + * Signal that there is a new synch command + */ + src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT); + + if (!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) { + ok = 0; + start = jiffies; + + if (command == IOP_RESET_ALWAYS) { + /* Wait up to 10 sec */ + delay = 10*HZ; + } else { + /* Wait up to 5 minutes */ + delay = 300*HZ; + } + while (time_before(jiffies, start+delay)) { + udelay(5); /* Delay 5 microseconds to let Mon960 get info. */ + /* + * Mon960 will set doorbell0 bit when it has completed the command. + */ + if (aac_src_get_sync_status(dev) & OUTBOUNDDOORBELL_0) { + /* + * Clear the doorbell. + */ + if (dev->msi_enabled) + aac_src_access_devreg(dev, + AAC_CLEAR_SYNC_BIT); + else + src_writel(dev, + MUnit.ODR_C, + OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT); + ok = 1; + break; + } + /* + * Yield the processor in case we are slow + */ + msleep(1); + } + if (unlikely(ok != 1)) { + /* + * Restore interrupt mask even though we timed out + */ + aac_adapter_enable_int(dev); + return -ETIMEDOUT; + } + /* + * Pull the synch status from Mailbox 0. + */ + if (status) + *status = readl(&dev->IndexRegs->Mailbox[0]); + if (r1) + *r1 = readl(&dev->IndexRegs->Mailbox[1]); + if (r2) + *r2 = readl(&dev->IndexRegs->Mailbox[2]); + if (r3) + *r3 = readl(&dev->IndexRegs->Mailbox[3]); + if (r4) + *r4 = readl(&dev->IndexRegs->Mailbox[4]); + if (command == GET_COMM_PREFERRED_SETTINGS) + dev->max_msix = + readl(&dev->IndexRegs->Mailbox[5]) & 0xFFFF; + /* + * Clear the synch command doorbell. + */ + if (!dev->msi_enabled) + src_writel(dev, + MUnit.ODR_C, + OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT); + } + + /* + * Restore interrupt mask + */ + aac_adapter_enable_int(dev); + return 0; +} + +/** + * aac_src_interrupt_adapter - interrupt adapter + * @dev: Adapter + * + * Send an interrupt to the i960 and breakpoint it. + */ + +static void aac_src_interrupt_adapter(struct aac_dev *dev) +{ + src_sync_cmd(dev, BREAKPOINT_REQUEST, + 0, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); +} + +/** + * aac_src_notify_adapter - send an event to the adapter + * @dev: Adapter + * @event: Event to send + * + * Notify the i960 that something it probably cares about has + * happened. + */ + +static void aac_src_notify_adapter(struct aac_dev *dev, u32 event) +{ + switch (event) { + + case AdapNormCmdQue: + src_writel(dev, MUnit.ODR_C, + INBOUNDDOORBELL_1 << SRC_ODR_SHIFT); + break; + case HostNormRespNotFull: + src_writel(dev, MUnit.ODR_C, + INBOUNDDOORBELL_4 << SRC_ODR_SHIFT); + break; + case AdapNormRespQue: + src_writel(dev, MUnit.ODR_C, + INBOUNDDOORBELL_2 << SRC_ODR_SHIFT); + break; + case HostNormCmdNotFull: + src_writel(dev, MUnit.ODR_C, + INBOUNDDOORBELL_3 << SRC_ODR_SHIFT); + break; + case FastIo: + src_writel(dev, MUnit.ODR_C, + INBOUNDDOORBELL_6 << SRC_ODR_SHIFT); + break; + case AdapPrintfDone: + src_writel(dev, MUnit.ODR_C, + INBOUNDDOORBELL_5 << SRC_ODR_SHIFT); + break; + default: + BUG(); + break; + } +} + +/** + * aac_src_start_adapter - activate adapter + * @dev: Adapter + * + * Start up processing on an i960 based AAC adapter + */ + +static void aac_src_start_adapter(struct aac_dev *dev) +{ + struct aac_init *init; + int i; + + /* reset host_rrq_idx first */ + for (i = 0; i < dev->max_msix; i++) { + dev->host_rrq_idx[i] = i * dev->vector_cap; + atomic_set(&dev->rrq_outstanding[i], 0); + } + dev->fibs_pushed_no = 0; + + init = dev->init; + init->HostElapsedSeconds = cpu_to_le32(get_seconds()); + + /* We can only use a 32 bit address here */ + src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, + 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); +} + +/** + * aac_src_check_health + * @dev: device to check if healthy + * + * Will attempt to determine if the specified adapter is alive and + * capable of handling requests, returning 0 if alive. + */ +static int aac_src_check_health(struct aac_dev *dev) +{ + u32 status = src_readl(dev, MUnit.OMR); + + /* + * Check to see if the board failed any self tests. + */ + if (unlikely(status & SELF_TEST_FAILED)) + return -1; + + /* + * Check to see if the board panic'd. + */ + if (unlikely(status & KERNEL_PANIC)) + return (status >> 16) & 0xFF; + /* + * Wait for the adapter to be up and running. + */ + if (unlikely(!(status & KERNEL_UP_AND_RUNNING))) + return -3; + /* + * Everything is OK + */ + return 0; +} + +/** + * aac_src_deliver_message + * @fib: fib to issue + * + * Will send a fib, returning 0 if successful. + */ +static int aac_src_deliver_message(struct fib *fib) +{ + struct aac_dev *dev = fib->dev; + struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue]; + u32 fibsize; + dma_addr_t address; + struct aac_fib_xporthdr *pFibX; + u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size); + + atomic_inc(&q->numpending); + + if (dev->msi_enabled && fib->hw_fib_va->header.Command != AifRequest && + dev->max_msix > 1) { + u_int16_t vector_no, first_choice = 0xffff; + + vector_no = dev->fibs_pushed_no % dev->max_msix; + do { + vector_no += 1; + if (vector_no == dev->max_msix) + vector_no = 1; + if (atomic_read(&dev->rrq_outstanding[vector_no]) < + dev->vector_cap) + break; + if (0xffff == first_choice) + first_choice = vector_no; + else if (vector_no == first_choice) + break; + } while (1); + if (vector_no == first_choice) + vector_no = 0; + atomic_inc(&dev->rrq_outstanding[vector_no]); + if (dev->fibs_pushed_no == 0xffffffff) + dev->fibs_pushed_no = 0; + else + dev->fibs_pushed_no++; + fib->hw_fib_va->header.Handle += (vector_no << 16); + } + + if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) { + /* Calculate the amount to the fibsize bits */ + fibsize = (hdr_size + 127) / 128 - 1; + if (fibsize > (ALIGN32 - 1)) + return -EMSGSIZE; + /* New FIB header, 32-bit */ + address = fib->hw_fib_pa; + fib->hw_fib_va->header.StructType = FIB_MAGIC2; + fib->hw_fib_va->header.SenderFibAddress = (u32)address; + fib->hw_fib_va->header.u.TimeStamp = 0; + BUG_ON(upper_32_bits(address) != 0L); + address |= fibsize; + } else { + /* Calculate the amount to the fibsize bits */ + fibsize = (sizeof(struct aac_fib_xporthdr) + hdr_size + 127) / 128 - 1; + if (fibsize > (ALIGN32 - 1)) + return -EMSGSIZE; + + /* Fill XPORT header */ + pFibX = (void *)fib->hw_fib_va - sizeof(struct aac_fib_xporthdr); + pFibX->Handle = cpu_to_le32(fib->hw_fib_va->header.Handle); + pFibX->HostAddress = cpu_to_le64(fib->hw_fib_pa); + pFibX->Size = cpu_to_le32(hdr_size); + + /* + * The xport header has been 32-byte aligned for us so that fibsize + * can be masked out of this address by hardware. -- BenC + */ + address = fib->hw_fib_pa - sizeof(struct aac_fib_xporthdr); + if (address & (ALIGN32 - 1)) + return -EINVAL; + address |= fibsize; + } + + src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff); + src_writel(dev, MUnit.IQ_L, address & 0xffffffff); + + return 0; +} + +/** + * aac_src_ioremap + * @size: mapping resize request + * + */ +static int aac_src_ioremap(struct aac_dev *dev, u32 size) +{ + if (!size) { + iounmap(dev->regs.src.bar1); + dev->regs.src.bar1 = NULL; + iounmap(dev->regs.src.bar0); + dev->base = dev->regs.src.bar0 = NULL; + return 0; + } + dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2), + AAC_MIN_SRC_BAR1_SIZE); + dev->base = NULL; + if (dev->regs.src.bar1 == NULL) + return -1; + dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size); + if (dev->base == NULL) { + iounmap(dev->regs.src.bar1); + dev->regs.src.bar1 = NULL; + return -1; + } + dev->IndexRegs = &((struct src_registers __iomem *) + dev->base)->u.tupelo.IndexRegs; + return 0; +} + +/** + * aac_srcv_ioremap + * @size: mapping resize request + * + */ +static int aac_srcv_ioremap(struct aac_dev *dev, u32 size) +{ + if (!size) { + iounmap(dev->regs.src.bar0); + dev->base = dev->regs.src.bar0 = NULL; + return 0; + } + dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size); + if (dev->base == NULL) + return -1; + dev->IndexRegs = &((struct src_registers __iomem *) + dev->base)->u.denali.IndexRegs; + return 0; +} + +static int aac_src_restart_adapter(struct aac_dev *dev, int bled) +{ + u32 var, reset_mask; + + if (bled >= 0) { + if (bled) + printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n", + dev->name, dev->id, bled); + dev->a_ops.adapter_enable_int = aac_src_disable_interrupt; + bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS, + 0, 0, 0, 0, 0, 0, &var, &reset_mask, NULL, NULL, NULL); + if ((bled || (var != 0x00000001)) && + !dev->doorbell_mask) + return -EINVAL; + else if (dev->doorbell_mask) { + reset_mask = dev->doorbell_mask; + bled = 0; + var = 0x00000001; + } + + if ((dev->pdev->device == PMC_DEVICE_S7 || + dev->pdev->device == PMC_DEVICE_S8 || + dev->pdev->device == PMC_DEVICE_S9) && dev->msi_enabled) { + aac_src_access_devreg(dev, AAC_ENABLE_INTX); + dev->msi_enabled = 0; + msleep(5000); /* Delay 5 seconds */ + } + + if (!bled && (dev->supplement_adapter_info.SupportedOptions2 & + AAC_OPTION_DOORBELL_RESET)) { + src_writel(dev, MUnit.IDR, reset_mask); + ssleep(45); + } else { + src_writel(dev, MUnit.IDR, 0x100); + ssleep(45); + } + } + + if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC) + return -ENODEV; + + if (startup_timeout < 300) + startup_timeout = 300; + + return 0; +} + +/** + * aac_src_select_comm - Select communications method + * @dev: Adapter + * @comm: communications method + */ +int aac_src_select_comm(struct aac_dev *dev, int comm) +{ + switch (comm) { + case AAC_COMM_MESSAGE: + dev->a_ops.adapter_intr = aac_src_intr_message; + dev->a_ops.adapter_deliver = aac_src_deliver_message; + break; + default: + return 1; + } + return 0; +} + +/** + * aac_src_init - initialize an Cardinal Frey Bar card + * @dev: device to configure + * + */ + +int aac_src_init(struct aac_dev *dev) +{ + unsigned long start; + unsigned long status; + int restart = 0; + int instance = dev->id; + const char *name = dev->name; + + dev->a_ops.adapter_ioremap = aac_src_ioremap; + dev->a_ops.adapter_comm = aac_src_select_comm; + + dev->base_size = AAC_MIN_SRC_BAR0_SIZE; + if (aac_adapter_ioremap(dev, dev->base_size)) { + printk(KERN_WARNING "%s: unable to map adapter.\n", name); + goto error_iounmap; + } + + /* Failure to reset here is an option ... */ + dev->a_ops.adapter_sync_cmd = src_sync_cmd; + dev->a_ops.adapter_enable_int = aac_src_disable_interrupt; + if ((aac_reset_devices || reset_devices) && + !aac_src_restart_adapter(dev, 0)) + ++restart; + /* + * Check to see if the board panic'd while booting. + */ + status = src_readl(dev, MUnit.OMR); + if (status & KERNEL_PANIC) { + if (aac_src_restart_adapter(dev, aac_src_check_health(dev))) + goto error_iounmap; + ++restart; + } + /* + * Check to see if the board failed any self tests. + */ + status = src_readl(dev, MUnit.OMR); + if (status & SELF_TEST_FAILED) { + printk(KERN_ERR "%s%d: adapter self-test failed.\n", + dev->name, instance); + goto error_iounmap; + } + /* + * Check to see if the monitor panic'd while booting. + */ + if (status & MONITOR_PANIC) { + printk(KERN_ERR "%s%d: adapter monitor panic.\n", + dev->name, instance); + goto error_iounmap; + } + start = jiffies; + /* + * Wait for the adapter to be up and running. Wait up to 3 minutes + */ + while (!((status = src_readl(dev, MUnit.OMR)) & + KERNEL_UP_AND_RUNNING)) { + if ((restart && + (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) || + time_after(jiffies, start+HZ*startup_timeout)) { + printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", + dev->name, instance, status); + goto error_iounmap; + } + if (!restart && + ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) || + time_after(jiffies, start + HZ * + ((startup_timeout > 60) + ? (startup_timeout - 60) + : (startup_timeout / 2))))) { + if (likely(!aac_src_restart_adapter(dev, + aac_src_check_health(dev)))) + start = jiffies; + ++restart; + } + msleep(1); + } + if (restart && aac_commit) + aac_commit = 1; + /* + * Fill in the common function dispatch table. + */ + dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter; + dev->a_ops.adapter_disable_int = aac_src_disable_interrupt; + dev->a_ops.adapter_enable_int = aac_src_disable_interrupt; + dev->a_ops.adapter_notify = aac_src_notify_adapter; + dev->a_ops.adapter_sync_cmd = src_sync_cmd; + dev->a_ops.adapter_check_health = aac_src_check_health; + dev->a_ops.adapter_restart = aac_src_restart_adapter; + + /* + * First clear out all interrupts. Then enable the one's that we + * can handle. + */ + aac_adapter_comm(dev, AAC_COMM_MESSAGE); + aac_adapter_disable_int(dev); + src_writel(dev, MUnit.ODR_C, 0xffffffff); + aac_adapter_enable_int(dev); + + if (aac_init_adapter(dev) == NULL) + goto error_iounmap; + if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1) + goto error_iounmap; + + dev->msi = aac_msi && !pci_enable_msi(dev->pdev); + + dev->aac_msix[0].vector_no = 0; + dev->aac_msix[0].dev = dev; + + if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr, + IRQF_SHARED, "aacraid", &(dev->aac_msix[0])) < 0) { + + if (dev->msi) + pci_disable_msi(dev->pdev); + + printk(KERN_ERR "%s%d: Interrupt unavailable.\n", + name, instance); + goto error_iounmap; + } + dev->dbg_base = pci_resource_start(dev->pdev, 2); + dev->dbg_base_mapped = dev->regs.src.bar1; + dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE; + dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message; + + aac_adapter_enable_int(dev); + + if (!dev->sync_mode) { + /* + * Tell the adapter that all is configured, and it can + * start accepting requests + */ + aac_src_start_adapter(dev); + } + return 0; + +error_iounmap: + + return -1; +} + +/** + * aac_srcv_init - initialize an SRCv card + * @dev: device to configure + * + */ + +int aac_srcv_init(struct aac_dev *dev) +{ + unsigned long start; + unsigned long status; + int restart = 0; + int instance = dev->id; + int i, j; + const char *name = dev->name; + int cpu; + + dev->a_ops.adapter_ioremap = aac_srcv_ioremap; + dev->a_ops.adapter_comm = aac_src_select_comm; + + dev->base_size = AAC_MIN_SRCV_BAR0_SIZE; + if (aac_adapter_ioremap(dev, dev->base_size)) { + printk(KERN_WARNING "%s: unable to map adapter.\n", name); + goto error_iounmap; + } + + /* Failure to reset here is an option ... */ + dev->a_ops.adapter_sync_cmd = src_sync_cmd; + dev->a_ops.adapter_enable_int = aac_src_disable_interrupt; + if ((aac_reset_devices || reset_devices) && + !aac_src_restart_adapter(dev, 0)) + ++restart; + /* + * Check to see if flash update is running. + * Wait for the adapter to be up and running. Wait up to 5 minutes + */ + status = src_readl(dev, MUnit.OMR); + if (status & FLASH_UPD_PENDING) { + start = jiffies; + do { + status = src_readl(dev, MUnit.OMR); + if (time_after(jiffies, start+HZ*FWUPD_TIMEOUT)) { + printk(KERN_ERR "%s%d: adapter flash update failed.\n", + dev->name, instance); + goto error_iounmap; + } + } while (!(status & FLASH_UPD_SUCCESS) && + !(status & FLASH_UPD_FAILED)); + /* Delay 10 seconds. + * Because right now FW is doing a soft reset, + * do not read scratch pad register at this time + */ + ssleep(10); + } + /* + * Check to see if the board panic'd while booting. + */ + status = src_readl(dev, MUnit.OMR); + if (status & KERNEL_PANIC) { + if (aac_src_restart_adapter(dev, aac_src_check_health(dev))) + goto error_iounmap; + ++restart; + } + /* + * Check to see if the board failed any self tests. + */ + status = src_readl(dev, MUnit.OMR); + if (status & SELF_TEST_FAILED) { + printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance); + goto error_iounmap; + } + /* + * Check to see if the monitor panic'd while booting. + */ + if (status & MONITOR_PANIC) { + printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance); + goto error_iounmap; + } + start = jiffies; + /* + * Wait for the adapter to be up and running. Wait up to 3 minutes + */ + while (!((status = src_readl(dev, MUnit.OMR)) & + KERNEL_UP_AND_RUNNING) || + status == 0xffffffff) { + if ((restart && + (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) || + time_after(jiffies, start+HZ*startup_timeout)) { + printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", + dev->name, instance, status); + goto error_iounmap; + } + if (!restart && + ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) || + time_after(jiffies, start + HZ * + ((startup_timeout > 60) + ? (startup_timeout - 60) + : (startup_timeout / 2))))) { + if (likely(!aac_src_restart_adapter(dev, aac_src_check_health(dev)))) + start = jiffies; + ++restart; + } + msleep(1); + } + if (restart && aac_commit) + aac_commit = 1; + /* + * Fill in the common function dispatch table. + */ + dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter; + dev->a_ops.adapter_disable_int = aac_src_disable_interrupt; + dev->a_ops.adapter_enable_int = aac_src_disable_interrupt; + dev->a_ops.adapter_notify = aac_src_notify_adapter; + dev->a_ops.adapter_sync_cmd = src_sync_cmd; + dev->a_ops.adapter_check_health = aac_src_check_health; + dev->a_ops.adapter_restart = aac_src_restart_adapter; + + /* + * First clear out all interrupts. Then enable the one's that we + * can handle. + */ + aac_adapter_comm(dev, AAC_COMM_MESSAGE); + aac_adapter_disable_int(dev); + src_writel(dev, MUnit.ODR_C, 0xffffffff); + aac_adapter_enable_int(dev); + + if (aac_init_adapter(dev) == NULL) + goto error_iounmap; + if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE2) + goto error_iounmap; + if (dev->msi_enabled) + aac_src_access_devreg(dev, AAC_ENABLE_MSIX); + if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) { + cpu = cpumask_first(cpu_online_mask); + for (i = 0; i < dev->max_msix; i++) { + dev->aac_msix[i].vector_no = i; + dev->aac_msix[i].dev = dev; + + if (request_irq(dev->msixentry[i].vector, + dev->a_ops.adapter_intr, + 0, + "aacraid", + &(dev->aac_msix[i]))) { + printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n", + name, instance, i); + for (j = 0 ; j < i ; j++) + free_irq(dev->msixentry[j].vector, + &(dev->aac_msix[j])); + pci_disable_msix(dev->pdev); + goto error_iounmap; + } + if (irq_set_affinity_hint( + dev->msixentry[i].vector, + get_cpu_mask(cpu))) { + printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n", + name, instance, cpu); + } + cpu = cpumask_next(cpu, cpu_online_mask); + } + } else { + dev->aac_msix[0].vector_no = 0; + dev->aac_msix[0].dev = dev; + + if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr, + IRQF_SHARED, + "aacraid", + &(dev->aac_msix[0])) < 0) { + if (dev->msi) + pci_disable_msi(dev->pdev); + printk(KERN_ERR "%s%d: Interrupt unavailable.\n", + name, instance); + goto error_iounmap; + } + } + dev->dbg_base = dev->base_start; + dev->dbg_base_mapped = dev->base; + dev->dbg_size = dev->base_size; + dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message; + + aac_adapter_enable_int(dev); + + if (!dev->sync_mode) { + /* + * Tell the adapter that all is configured, and it can + * start accepting requests + */ + aac_src_start_adapter(dev); + } + return 0; + +error_iounmap: + + return -1; +} + +void aac_src_access_devreg(struct aac_dev *dev, int mode) +{ + u_int32_t val; + + switch (mode) { + case AAC_ENABLE_INTERRUPT: + src_writel(dev, + MUnit.OIMR, + dev->OIMR = (dev->msi_enabled ? + AAC_INT_ENABLE_TYPE1_MSIX : + AAC_INT_ENABLE_TYPE1_INTX)); + break; + + case AAC_DISABLE_INTERRUPT: + src_writel(dev, + MUnit.OIMR, + dev->OIMR = AAC_INT_DISABLE_ALL); + break; + + case AAC_ENABLE_MSIX: + /* set bit 6 */ + val = src_readl(dev, MUnit.IDR); + val |= 0x40; + src_writel(dev, MUnit.IDR, val); + src_readl(dev, MUnit.IDR); + /* unmask int. */ + val = PMC_ALL_INTERRUPT_BITS; + src_writel(dev, MUnit.IOAR, val); + val = src_readl(dev, MUnit.OIMR); + src_writel(dev, + MUnit.OIMR, + val & (~(PMC_GLOBAL_INT_BIT2 | PMC_GLOBAL_INT_BIT0))); + break; + + case AAC_DISABLE_MSIX: + /* reset bit 6 */ + val = src_readl(dev, MUnit.IDR); + val &= ~0x40; + src_writel(dev, MUnit.IDR, val); + src_readl(dev, MUnit.IDR); + break; + + case AAC_CLEAR_AIF_BIT: + /* set bit 5 */ + val = src_readl(dev, MUnit.IDR); + val |= 0x20; + src_writel(dev, MUnit.IDR, val); + src_readl(dev, MUnit.IDR); + break; + + case AAC_CLEAR_SYNC_BIT: + /* set bit 4 */ + val = src_readl(dev, MUnit.IDR); + val |= 0x10; + src_writel(dev, MUnit.IDR, val); + src_readl(dev, MUnit.IDR); + break; + + case AAC_ENABLE_INTX: + /* set bit 7 */ + val = src_readl(dev, MUnit.IDR); + val |= 0x80; + src_writel(dev, MUnit.IDR, val); + src_readl(dev, MUnit.IDR); + /* unmask int. */ + val = PMC_ALL_INTERRUPT_BITS; + src_writel(dev, MUnit.IOAR, val); + src_readl(dev, MUnit.IOAR); + val = src_readl(dev, MUnit.OIMR); + src_writel(dev, MUnit.OIMR, + val & (~(PMC_GLOBAL_INT_BIT2))); + break; + + default: + break; + } +} + +static int aac_src_get_sync_status(struct aac_dev *dev) +{ + + int val; + + if (dev->msi_enabled) + val = src_readl(dev, MUnit.ODR_MSI) & 0x1000 ? 1 : 0; + else + val = src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT; + + return val; +} |