diff options
Diffstat (limited to 'drivers/scsi/aic7xxx/aicasm/aicasm.c')
-rw-r--r-- | drivers/scsi/aic7xxx/aicasm/aicasm.c | 844 |
1 files changed, 844 insertions, 0 deletions
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm.c b/drivers/scsi/aic7xxx/aicasm/aicasm.c new file mode 100644 index 000000000..2e3117aa3 --- /dev/null +++ b/drivers/scsi/aic7xxx/aicasm/aicasm.c @@ -0,0 +1,844 @@ +/* + * Aic7xxx SCSI host adapter firmware assembler + * + * Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs. + * Copyright (c) 2001, 2002 Adaptec Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $ + * + * $FreeBSD$ + */ +#include <sys/types.h> +#include <sys/mman.h> + +#include <ctype.h> +#include <inttypes.h> +#include <regex.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sysexits.h> +#include <unistd.h> + +#if linux +#include <endian.h> +#else +#include <machine/endian.h> +#endif + +#include "aicasm.h" +#include "aicasm_symbol.h" +#include "aicasm_insformat.h" + +typedef struct patch { + STAILQ_ENTRY(patch) links; + int patch_func; + u_int begin; + u_int skip_instr; + u_int skip_patch; +} patch_t; + +STAILQ_HEAD(patch_list, patch) patches; + +static void usage(void); +static void back_patch(void); +static void output_code(void); +static void output_listing(char *ifilename); +static void dump_scope(scope_t *scope); +static void emit_patch(scope_t *scope, int patch); +static int check_patch(patch_t **start_patch, int start_instr, + int *skip_addr, int *func_vals); + +struct path_list search_path; +int includes_search_curdir; +char *appname; +char *stock_include_file; +FILE *ofile; +char *ofilename; +char *regfilename; +FILE *regfile; +char *listfilename; +FILE *listfile; +char *regdiagfilename; +FILE *regdiagfile; +int src_mode; +int dst_mode; + +static STAILQ_HEAD(,instruction) seq_program; +struct cs_tailq cs_tailq; +struct scope_list scope_stack; +symlist_t patch_functions; + +#if DEBUG +extern int yy_flex_debug; +extern int mm_flex_debug; +extern int yydebug; +extern int mmdebug; +#endif +extern FILE *yyin; +extern int yyparse(void); + +int main(int argc, char *argv[]); + +int +main(int argc, char *argv[]) +{ + extern char *optarg; + extern int optind; + int ch; + int retval; + char *inputfilename; + scope_t *sentinal; + + STAILQ_INIT(&patches); + SLIST_INIT(&search_path); + STAILQ_INIT(&seq_program); + TAILQ_INIT(&cs_tailq); + SLIST_INIT(&scope_stack); + + /* Set Sentinal scope node */ + sentinal = scope_alloc(); + sentinal->type = SCOPE_ROOT; + + includes_search_curdir = 1; + appname = *argv; + regfile = NULL; + listfile = NULL; +#if DEBUG + yy_flex_debug = 0; + mm_flex_debug = 0; + yydebug = 0; + mmdebug = 0; +#endif + while ((ch = getopt(argc, argv, "d:i:l:n:o:p:r:I:")) != -1) { + switch(ch) { + case 'd': +#if DEBUG + if (strcmp(optarg, "s") == 0) { + yy_flex_debug = 1; + mm_flex_debug = 1; + } else if (strcmp(optarg, "p") == 0) { + yydebug = 1; + mmdebug = 1; + } else { + fprintf(stderr, "%s: -d Requires either an " + "'s' or 'p' argument\n", appname); + usage(); + } +#else + stop("-d: Assembler not built with debugging " + "information", EX_SOFTWARE); +#endif + break; + case 'i': + stock_include_file = optarg; + break; + case 'l': + /* Create a program listing */ + if ((listfile = fopen(optarg, "w")) == NULL) { + perror(optarg); + stop(NULL, EX_CANTCREAT); + } + listfilename = optarg; + break; + case 'n': + /* Don't complain about the -nostdinc directrive */ + if (strcmp(optarg, "ostdinc")) { + fprintf(stderr, "%s: Unknown option -%c%s\n", + appname, ch, optarg); + usage(); + /* NOTREACHED */ + } + break; + case 'o': + if ((ofile = fopen(optarg, "w")) == NULL) { + perror(optarg); + stop(NULL, EX_CANTCREAT); + } + ofilename = optarg; + break; + case 'p': + /* Create Register Diagnostic "printing" Functions */ + if ((regdiagfile = fopen(optarg, "w")) == NULL) { + perror(optarg); + stop(NULL, EX_CANTCREAT); + } + regdiagfilename = optarg; + break; + case 'r': + if ((regfile = fopen(optarg, "w")) == NULL) { + perror(optarg); + stop(NULL, EX_CANTCREAT); + } + regfilename = optarg; + break; + case 'I': + { + path_entry_t include_dir; + + if (strcmp(optarg, "-") == 0) { + if (includes_search_curdir == 0) { + fprintf(stderr, "%s: Warning - '-I-' " + "specified multiple " + "times\n", appname); + } + includes_search_curdir = 0; + for (include_dir = SLIST_FIRST(&search_path); + include_dir != NULL; + include_dir = SLIST_NEXT(include_dir, + links)) + /* + * All entries before a '-I-' only + * apply to includes specified with + * quotes instead of "<>". + */ + include_dir->quoted_includes_only = 1; + } else { + include_dir = + (path_entry_t)malloc(sizeof(*include_dir)); + if (include_dir == NULL) { + perror(optarg); + stop(NULL, EX_OSERR); + } + include_dir->directory = strdup(optarg); + if (include_dir->directory == NULL) { + perror(optarg); + stop(NULL, EX_OSERR); + } + include_dir->quoted_includes_only = 0; + SLIST_INSERT_HEAD(&search_path, include_dir, + links); + } + break; + } + case '?': + default: + usage(); + /* NOTREACHED */ + } + } + argc -= optind; + argv += optind; + + if (argc != 1) { + fprintf(stderr, "%s: No input file specifiled\n", appname); + usage(); + /* NOTREACHED */ + } + + if (regdiagfile != NULL + && (regfile == NULL || stock_include_file == NULL)) { + fprintf(stderr, + "%s: The -p option requires the -r and -i options.\n", + appname); + usage(); + /* NOTREACHED */ + } + symtable_open(); + inputfilename = *argv; + include_file(*argv, SOURCE_FILE); + retval = yyparse(); + if (retval == 0) { + if (SLIST_FIRST(&scope_stack) == NULL + || SLIST_FIRST(&scope_stack)->type != SCOPE_ROOT) { + stop("Unterminated conditional expression", EX_DATAERR); + /* NOTREACHED */ + } + + /* Process outmost scope */ + process_scope(SLIST_FIRST(&scope_stack)); + /* + * Decend the tree of scopes and insert/emit + * patches as appropriate. We perform a depth first + * tranversal, recursively handling each scope. + */ + /* start at the root scope */ + dump_scope(SLIST_FIRST(&scope_stack)); + + /* Patch up forward jump addresses */ + back_patch(); + + if (ofile != NULL) + output_code(); + if (regfile != NULL) + symtable_dump(regfile, regdiagfile); + if (listfile != NULL) + output_listing(inputfilename); + } + + stop(NULL, 0); + /* NOTREACHED */ + return (0); +} + +static void +usage() +{ + + (void)fprintf(stderr, +"usage: %-16s [-nostdinc] [-I-] [-I directory] [-o output_file]\n" +" [-r register_output_file [-p register_diag_file -i includefile]]\n" +" [-l program_list_file]\n" +" input_file\n", appname); + exit(EX_USAGE); +} + +static void +back_patch() +{ + struct instruction *cur_instr; + + for (cur_instr = STAILQ_FIRST(&seq_program); + cur_instr != NULL; + cur_instr = STAILQ_NEXT(cur_instr, links)) { + if (cur_instr->patch_label != NULL) { + struct ins_format3 *f3_instr; + u_int address; + + if (cur_instr->patch_label->type != LABEL) { + char buf[255]; + + snprintf(buf, sizeof(buf), + "Undefined label %s", + cur_instr->patch_label->name); + stop(buf, EX_DATAERR); + /* NOTREACHED */ + } + f3_instr = &cur_instr->format.format3; + address = f3_instr->address; + address += cur_instr->patch_label->info.linfo->address; + f3_instr->address = address; + } + } +} + +static void +output_code() +{ + struct instruction *cur_instr; + patch_t *cur_patch; + critical_section_t *cs; + symbol_node_t *cur_node; + int instrcount; + + instrcount = 0; + fprintf(ofile, +"/*\n" +" * DO NOT EDIT - This file is automatically generated\n" +" * from the following source files:\n" +" *\n" +"%s */\n", versions); + + fprintf(ofile, "static const uint8_t seqprog[] = {\n"); + for (cur_instr = STAILQ_FIRST(&seq_program); + cur_instr != NULL; + cur_instr = STAILQ_NEXT(cur_instr, links)) { + + fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x", + cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n", +#ifdef __LITTLE_ENDIAN + cur_instr->format.bytes[0], + cur_instr->format.bytes[1], + cur_instr->format.bytes[2], + cur_instr->format.bytes[3]); +#else + cur_instr->format.bytes[3], + cur_instr->format.bytes[2], + cur_instr->format.bytes[1], + cur_instr->format.bytes[0]); +#endif + instrcount++; + } + fprintf(ofile, "\n};\n\n"); + + if (patch_arg_list == NULL) + stop("Patch argument list not defined", + EX_DATAERR); + + /* + * Output patch information. Patch functions first. + */ + fprintf(ofile, +"typedef int %spatch_func_t (%s);\n", prefix, patch_arg_list); + + for (cur_node = SLIST_FIRST(&patch_functions); + cur_node != NULL; + cur_node = SLIST_NEXT(cur_node,links)) { + fprintf(ofile, +"static %spatch_func_t %spatch%d_func;\n" +"\n" +"static int\n" +"%spatch%d_func(%s)\n" +"{\n" +" return (%s);\n" +"}\n\n", + prefix, + prefix, + cur_node->symbol->info.condinfo->func_num, + prefix, + cur_node->symbol->info.condinfo->func_num, + patch_arg_list, + cur_node->symbol->name); + } + + fprintf(ofile, +"static const struct patch {\n" +" %spatch_func_t *patch_func;\n" +" uint32_t begin :10,\n" +" skip_instr :10,\n" +" skip_patch :12;\n" +"} patches[] = {\n", prefix); + + for (cur_patch = STAILQ_FIRST(&patches); + cur_patch != NULL; + cur_patch = STAILQ_NEXT(cur_patch,links)) { + fprintf(ofile, "%s\t{ %spatch%d_func, %d, %d, %d }", + cur_patch == STAILQ_FIRST(&patches) ? "" : ",\n", + prefix, + cur_patch->patch_func, cur_patch->begin, + cur_patch->skip_instr, cur_patch->skip_patch); + } + + fprintf(ofile, "\n};\n\n"); + + fprintf(ofile, +"static const struct cs {\n" +" uint16_t begin;\n" +" uint16_t end;\n" +"} critical_sections[] = {\n"); + + for (cs = TAILQ_FIRST(&cs_tailq); + cs != NULL; + cs = TAILQ_NEXT(cs, links)) { + fprintf(ofile, "%s\t{ %d, %d }", + cs == TAILQ_FIRST(&cs_tailq) ? "" : ",\n", + cs->begin_addr, cs->end_addr); + } + + fprintf(ofile, "\n};\n\n"); + + fprintf(ofile, +"static const int num_critical_sections = sizeof(critical_sections)\n" +" / sizeof(*critical_sections);\n"); + + fprintf(stderr, "%s: %d instructions used\n", appname, instrcount); +} + +static void +dump_scope(scope_t *scope) +{ + scope_t *cur_scope; + + /* + * Emit the first patch for this scope + */ + emit_patch(scope, 0); + + /* + * Dump each scope within this one. + */ + cur_scope = TAILQ_FIRST(&scope->inner_scope); + + while (cur_scope != NULL) { + + dump_scope(cur_scope); + + cur_scope = TAILQ_NEXT(cur_scope, scope_links); + } + + /* + * Emit the second, closing, patch for this scope + */ + emit_patch(scope, 1); +} + +void +emit_patch(scope_t *scope, int patch) +{ + patch_info_t *pinfo; + patch_t *new_patch; + + pinfo = &scope->patches[patch]; + + if (pinfo->skip_instr == 0) + /* No-Op patch */ + return; + + new_patch = (patch_t *)malloc(sizeof(*new_patch)); + + if (new_patch == NULL) + stop("Could not malloc patch structure", EX_OSERR); + + memset(new_patch, 0, sizeof(*new_patch)); + + if (patch == 0) { + new_patch->patch_func = scope->func_num; + new_patch->begin = scope->begin_addr; + } else { + new_patch->patch_func = 0; + new_patch->begin = scope->end_addr; + } + new_patch->skip_instr = pinfo->skip_instr; + new_patch->skip_patch = pinfo->skip_patch; + STAILQ_INSERT_TAIL(&patches, new_patch, links); +} + +void +output_listing(char *ifilename) +{ + char buf[1024]; + FILE *ifile; + struct instruction *cur_instr; + patch_t *cur_patch; + symbol_node_t *cur_func; + int *func_values; + int instrcount; + int instrptr; + int line; + int func_count; + int skip_addr; + + instrcount = 0; + instrptr = 0; + line = 1; + skip_addr = 0; + if ((ifile = fopen(ifilename, "r")) == NULL) { + perror(ifilename); + stop(NULL, EX_DATAERR); + } + + /* + * Determine which options to apply to this listing. + */ + for (func_count = 0, cur_func = SLIST_FIRST(&patch_functions); + cur_func != NULL; + cur_func = SLIST_NEXT(cur_func, links)) + func_count++; + + func_values = NULL; + if (func_count != 0) { + func_values = (int *)malloc(func_count * sizeof(int)); + + if (func_values == NULL) + stop("Could not malloc", EX_OSERR); + + func_values[0] = 0; /* FALSE func */ + func_count--; + + /* + * Ask the user to fill in the return values for + * the rest of the functions. + */ + + + for (cur_func = SLIST_FIRST(&patch_functions); + cur_func != NULL && SLIST_NEXT(cur_func, links) != NULL; + cur_func = SLIST_NEXT(cur_func, links), func_count--) { + int input; + + fprintf(stdout, "\n(%s)\n", cur_func->symbol->name); + fprintf(stdout, + "Enter the return value for " + "this expression[T/F]:"); + + while (1) { + + input = getchar(); + input = toupper(input); + + if (input == 'T') { + func_values[func_count] = 1; + break; + } else if (input == 'F') { + func_values[func_count] = 0; + break; + } + } + if (isatty(fileno(stdin)) == 0) + putchar(input); + } + fprintf(stdout, "\nThanks!\n"); + } + + /* Now output the listing */ + cur_patch = STAILQ_FIRST(&patches); + for (cur_instr = STAILQ_FIRST(&seq_program); + cur_instr != NULL; + cur_instr = STAILQ_NEXT(cur_instr, links), instrcount++) { + + if (check_patch(&cur_patch, instrcount, + &skip_addr, func_values) == 0) { + /* Don't count this instruction as it is in a patch + * that was removed. + */ + continue; + } + + while (line < cur_instr->srcline) { + fgets(buf, sizeof(buf), ifile); + fprintf(listfile, " \t%s", buf); + line++; + } + fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr, +#ifdef __LITTLE_ENDIAN + cur_instr->format.bytes[0], + cur_instr->format.bytes[1], + cur_instr->format.bytes[2], + cur_instr->format.bytes[3]); +#else + cur_instr->format.bytes[3], + cur_instr->format.bytes[2], + cur_instr->format.bytes[1], + cur_instr->format.bytes[0]); +#endif + /* + * Macro expansions can cause several instructions + * to be output for a single source line. Only + * advance the line once in these cases. + */ + if (line == cur_instr->srcline) { + fgets(buf, sizeof(buf), ifile); + fprintf(listfile, "\t%s", buf); + line++; + } else { + fprintf(listfile, "\n"); + } + instrptr++; + } + /* Dump the remainder of the file */ + while(fgets(buf, sizeof(buf), ifile) != NULL) + fprintf(listfile, " %s", buf); + + fclose(ifile); +} + +static int +check_patch(patch_t **start_patch, int start_instr, + int *skip_addr, int *func_vals) +{ + patch_t *cur_patch; + + cur_patch = *start_patch; + + while (cur_patch != NULL && start_instr == cur_patch->begin) { + if (func_vals[cur_patch->patch_func] == 0) { + int skip; + + /* Start rejecting code */ + *skip_addr = start_instr + cur_patch->skip_instr; + for (skip = cur_patch->skip_patch; + skip > 0 && cur_patch != NULL; + skip--) + cur_patch = STAILQ_NEXT(cur_patch, links); + } else { + /* Accepted this patch. Advance to the next + * one and wait for our intruction pointer to + * hit this point. + */ + cur_patch = STAILQ_NEXT(cur_patch, links); + } + } + + *start_patch = cur_patch; + if (start_instr < *skip_addr) + /* Still skipping */ + return (0); + + return (1); +} + +/* + * Print out error information if appropriate, and clean up before + * terminating the program. + */ +void +stop(const char *string, int err_code) +{ + if (string != NULL) { + fprintf(stderr, "%s: ", appname); + if (yyfilename != NULL) { + fprintf(stderr, "Stopped at file %s, line %d - ", + yyfilename, yylineno); + } + fprintf(stderr, "%s\n", string); + } + + if (ofile != NULL) { + fclose(ofile); + if (err_code != 0) { + fprintf(stderr, "%s: Removing %s due to error\n", + appname, ofilename); + unlink(ofilename); + } + } + + if (regfile != NULL) { + fclose(regfile); + if (err_code != 0) { + fprintf(stderr, "%s: Removing %s due to error\n", + appname, regfilename); + unlink(regfilename); + } + } + + if (listfile != NULL) { + fclose(listfile); + if (err_code != 0) { + fprintf(stderr, "%s: Removing %s due to error\n", + appname, listfilename); + unlink(listfilename); + } + } + + symlist_free(&patch_functions); + symtable_close(); + + exit(err_code); +} + +struct instruction * +seq_alloc() +{ + struct instruction *new_instr; + + new_instr = (struct instruction *)malloc(sizeof(struct instruction)); + if (new_instr == NULL) + stop("Unable to malloc instruction object", EX_SOFTWARE); + memset(new_instr, 0, sizeof(*new_instr)); + STAILQ_INSERT_TAIL(&seq_program, new_instr, links); + new_instr->srcline = yylineno; + return new_instr; +} + +critical_section_t * +cs_alloc() +{ + critical_section_t *new_cs; + + new_cs= (critical_section_t *)malloc(sizeof(critical_section_t)); + if (new_cs == NULL) + stop("Unable to malloc critical_section object", EX_SOFTWARE); + memset(new_cs, 0, sizeof(*new_cs)); + + TAILQ_INSERT_TAIL(&cs_tailq, new_cs, links); + return new_cs; +} + +scope_t * +scope_alloc() +{ + scope_t *new_scope; + + new_scope = (scope_t *)malloc(sizeof(scope_t)); + if (new_scope == NULL) + stop("Unable to malloc scope object", EX_SOFTWARE); + memset(new_scope, 0, sizeof(*new_scope)); + TAILQ_INIT(&new_scope->inner_scope); + + if (SLIST_FIRST(&scope_stack) != NULL) { + TAILQ_INSERT_TAIL(&SLIST_FIRST(&scope_stack)->inner_scope, + new_scope, scope_links); + } + /* This patch is now the current scope */ + SLIST_INSERT_HEAD(&scope_stack, new_scope, scope_stack_links); + return new_scope; +} + +void +process_scope(scope_t *scope) +{ + /* + * We are "leaving" this scope. We should now have + * enough information to process the lists of scopes + * we encapsulate. + */ + scope_t *cur_scope; + u_int skip_patch_count; + u_int skip_instr_count; + + cur_scope = TAILQ_LAST(&scope->inner_scope, scope_tailq); + skip_patch_count = 0; + skip_instr_count = 0; + while (cur_scope != NULL) { + u_int patch0_patch_skip; + + patch0_patch_skip = 0; + switch (cur_scope->type) { + case SCOPE_IF: + case SCOPE_ELSE_IF: + if (skip_instr_count != 0) { + /* Create a tail patch */ + patch0_patch_skip++; + cur_scope->patches[1].skip_patch = + skip_patch_count + 1; + cur_scope->patches[1].skip_instr = + skip_instr_count; + } + + /* Count Head patch */ + patch0_patch_skip++; + + /* Count any patches contained in our inner scope */ + patch0_patch_skip += cur_scope->inner_scope_patches; + + cur_scope->patches[0].skip_patch = patch0_patch_skip; + cur_scope->patches[0].skip_instr = + cur_scope->end_addr - cur_scope->begin_addr; + + skip_instr_count += cur_scope->patches[0].skip_instr; + + skip_patch_count += patch0_patch_skip; + if (cur_scope->type == SCOPE_IF) { + scope->inner_scope_patches += skip_patch_count; + skip_patch_count = 0; + skip_instr_count = 0; + } + break; + case SCOPE_ELSE: + /* Count any patches contained in our innter scope */ + skip_patch_count += cur_scope->inner_scope_patches; + + skip_instr_count += cur_scope->end_addr + - cur_scope->begin_addr; + break; + case SCOPE_ROOT: + stop("Unexpected scope type encountered", EX_SOFTWARE); + /* NOTREACHED */ + } + + cur_scope = TAILQ_PREV(cur_scope, scope_tailq, scope_links); + } +} |