summaryrefslogtreecommitdiff
path: root/drivers/scsi/cxlflash/vlun.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/cxlflash/vlun.c')
-rw-r--r--drivers/scsi/cxlflash/vlun.c68
1 files changed, 49 insertions, 19 deletions
diff --git a/drivers/scsi/cxlflash/vlun.c b/drivers/scsi/cxlflash/vlun.c
index 6155cb1d4..a53f583e2 100644
--- a/drivers/scsi/cxlflash/vlun.c
+++ b/drivers/scsi/cxlflash/vlun.c
@@ -132,7 +132,7 @@ static int ba_init(struct ba_lun *ba_lun)
return -ENOMEM;
}
- /* Pass the allocated lun info as a handle to the user */
+ /* Pass the allocated LUN info as a handle to the user */
ba_lun->ba_lun_handle = bali;
pr_debug("%s: Successfully initialized the LUN: "
@@ -165,7 +165,7 @@ static int find_free_range(u32 low,
num_bits = (sizeof(*lam) * BITS_PER_BYTE);
bit_pos = find_first_bit(lam, num_bits);
- pr_devel("%s: Found free bit %llX in lun "
+ pr_devel("%s: Found free bit %llX in LUN "
"map entry %llX at bitmap index = %X\n",
__func__, bit_pos, bali->lun_alloc_map[i],
i);
@@ -400,6 +400,24 @@ static int init_vlun(struct llun_info *lli)
* @lba: Logical block address to start write same.
* @nblks: Number of logical blocks to write same.
*
+ * The SCSI WRITE_SAME16 can take quite a while to complete. Should an EEH occur
+ * while in scsi_execute(), the EEH handler will attempt to recover. As part of
+ * the recovery, the handler drains all currently running ioctls, waiting until
+ * they have completed before proceeding with a reset. As this routine is used
+ * on the ioctl path, this can create a condition where the EEH handler becomes
+ * stuck, infinitely waiting for this ioctl thread. To avoid this behavior,
+ * temporarily unmark this thread as an ioctl thread by releasing the ioctl read
+ * semaphore. This will allow the EEH handler to proceed with a recovery while
+ * this thread is still running. Once the scsi_execute() returns, reacquire the
+ * ioctl read semaphore and check the adapter state in case it changed while
+ * inside of scsi_execute(). The state check will wait if the adapter is still
+ * being recovered or return a failure if the recovery failed. In the event that
+ * the adapter reset failed, simply return the failure as the ioctl would be
+ * unable to continue.
+ *
+ * Note that the above puts a requirement on this routine to only be called on
+ * an ioctl thread.
+ *
* Return: 0 on success, -errno on failure
*/
static int write_same16(struct scsi_device *sdev,
@@ -414,7 +432,7 @@ static int write_same16(struct scsi_device *sdev,
int ws_limit = SISLITE_MAX_WS_BLOCKS;
u64 offset = lba;
int left = nblks;
- u32 tout = sdev->request_queue->rq_timeout;
+ u32 to = sdev->request_queue->rq_timeout;
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
@@ -433,8 +451,20 @@ static int write_same16(struct scsi_device *sdev,
put_unaligned_be32(ws_limit < left ? ws_limit : left,
&scsi_cmd[10]);
+ /* Drop the ioctl read semahpore across lengthy call */
+ up_read(&cfg->ioctl_rwsem);
result = scsi_execute(sdev, scsi_cmd, DMA_TO_DEVICE, cmd_buf,
- CMD_BUFSIZE, sense_buf, tout, 5, 0, NULL);
+ CMD_BUFSIZE, sense_buf, to, CMD_RETRIES,
+ 0, NULL);
+ down_read(&cfg->ioctl_rwsem);
+ rc = check_state(cfg);
+ if (rc) {
+ dev_err(dev, "%s: Failed state! result=0x08%X\n",
+ __func__, result);
+ rc = -ENODEV;
+ goto out;
+ }
+
if (result) {
dev_err_ratelimited(dev, "%s: command failed for "
"offset %lld result=0x%x\n",
@@ -681,14 +711,14 @@ out:
}
/**
- * _cxlflash_vlun_resize() - changes the size of a virtual lun
+ * _cxlflash_vlun_resize() - changes the size of a virtual LUN
* @sdev: SCSI device associated with LUN owning virtual LUN.
* @ctxi: Context owning resources.
* @resize: Resize ioctl data structure.
*
* On successful return, the user is informed of the new size (in blocks)
- * of the virtual lun in last LBA format. When the size of the virtual
- * lun is zero, the last LBA is reflected as -1. See comment in the
+ * of the virtual LUN in last LBA format. When the size of the virtual
+ * LUN is zero, the last LBA is reflected as -1. See comment in the
* prologue for _cxlflash_disk_release() regarding AFU syncs and contexts
* on the error recovery list.
*
@@ -785,7 +815,7 @@ void cxlflash_restore_luntable(struct cxlflash_cfg *cfg)
u32 chan;
u32 lind;
struct afu *afu = cfg->afu;
- struct sisl_global_map *agm = &afu->afu_map->global;
+ struct sisl_global_map __iomem *agm = &afu->afu_map->global;
mutex_lock(&global.mutex);
@@ -830,7 +860,7 @@ static int init_luntable(struct cxlflash_cfg *cfg, struct llun_info *lli)
u32 lind;
int rc = 0;
struct afu *afu = cfg->afu;
- struct sisl_global_map *agm = &afu->afu_map->global;
+ struct sisl_global_map __iomem *agm = &afu->afu_map->global;
mutex_lock(&global.mutex);
@@ -885,8 +915,8 @@ out:
* @arg: UVirtual ioctl data structure.
*
* On successful return, the user is informed of the resource handle
- * to be used to identify the virtual lun and the size (in blocks) of
- * the virtual lun in last LBA format. When the size of the virtual lun
+ * to be used to identify the virtual LUN and the size (in blocks) of
+ * the virtual LUN in last LBA format. When the size of the virtual LUN
* is zero, the last LBA is reflected as -1.
*
* Return: 0 on success, -errno on failure
@@ -914,16 +944,9 @@ int cxlflash_disk_virtual_open(struct scsi_device *sdev, void *arg)
pr_debug("%s: ctxid=%llu ls=0x%llx\n", __func__, ctxid, lun_size);
+ /* Setup the LUNs block allocator on first call */
mutex_lock(&gli->mutex);
if (gli->mode == MODE_NONE) {
- /* Setup the LUN table and block allocator on first call */
- rc = init_luntable(cfg, lli);
- if (rc) {
- dev_err(dev, "%s: call to init_luntable failed "
- "rc=%d!\n", __func__, rc);
- goto err0;
- }
-
rc = init_vlun(lli);
if (rc) {
dev_err(dev, "%s: call to init_vlun failed rc=%d!\n",
@@ -941,6 +964,13 @@ int cxlflash_disk_virtual_open(struct scsi_device *sdev, void *arg)
}
mutex_unlock(&gli->mutex);
+ rc = init_luntable(cfg, lli);
+ if (rc) {
+ dev_err(dev, "%s: call to init_luntable failed rc=%d!\n",
+ __func__, rc);
+ goto err1;
+ }
+
ctxi = get_context(cfg, rctxid, lli, 0);
if (unlikely(!ctxi)) {
dev_err(dev, "%s: Bad context! (%llu)\n", __func__, ctxid);