diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_debugfs.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_debugfs.c | 4698 |
1 files changed, 4698 insertions, 0 deletions
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c new file mode 100644 index 000000000..513edcb0c --- /dev/null +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -0,0 +1,4698 @@ +/******************************************************************* + * This file is part of the Emulex Linux Device Driver for * + * Fibre Channel Host Bus Adapters. * + * Copyright (C) 2007-2015 Emulex. All rights reserved. * + * EMULEX and SLI are trademarks of Emulex. * + * www.emulex.com * + * * + * This program is free software; you can redistribute it and/or * + * modify it under the terms of version 2 of the GNU General * + * Public License as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful. * + * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * + * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * + * TO BE LEGALLY INVALID. See the GNU General Public License for * + * more details, a copy of which can be found in the file COPYING * + * included with this package. * + *******************************************************************/ + +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/idr.h> +#include <linux/interrupt.h> +#include <linux/kthread.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/ctype.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport_fc.h> + +#include "lpfc_hw4.h" +#include "lpfc_hw.h" +#include "lpfc_sli.h" +#include "lpfc_sli4.h" +#include "lpfc_nl.h" +#include "lpfc_disc.h" +#include "lpfc_scsi.h" +#include "lpfc.h" +#include "lpfc_logmsg.h" +#include "lpfc_crtn.h" +#include "lpfc_vport.h" +#include "lpfc_version.h" +#include "lpfc_compat.h" +#include "lpfc_debugfs.h" +#include "lpfc_bsg.h" + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS +/* + * debugfs interface + * + * To access this interface the user should: + * # mount -t debugfs none /sys/kernel/debug + * + * The lpfc debugfs directory hierarchy is: + * /sys/kernel/debug/lpfc/fnX/vportY + * where X is the lpfc hba function unique_id + * where Y is the vport VPI on that hba + * + * Debugging services available per vport: + * discovery_trace + * This is an ACSII readable file that contains a trace of the last + * lpfc_debugfs_max_disc_trc events that happened on a specific vport. + * See lpfc_debugfs.h for different categories of discovery events. + * To enable the discovery trace, the following module parameters must be set: + * lpfc_debugfs_enable=1 Turns on lpfc debugfs filesystem support + * lpfc_debugfs_max_disc_trc=X Where X is the event trace depth for + * EACH vport. X MUST also be a power of 2. + * lpfc_debugfs_mask_disc_trc=Y Where Y is an event mask as defined in + * lpfc_debugfs.h . + * + * slow_ring_trace + * This is an ACSII readable file that contains a trace of the last + * lpfc_debugfs_max_slow_ring_trc events that happened on a specific HBA. + * To enable the slow ring trace, the following module parameters must be set: + * lpfc_debugfs_enable=1 Turns on lpfc debugfs filesystem support + * lpfc_debugfs_max_slow_ring_trc=X Where X is the event trace depth for + * the HBA. X MUST also be a power of 2. + */ +static int lpfc_debugfs_enable = 1; +module_param(lpfc_debugfs_enable, int, S_IRUGO); +MODULE_PARM_DESC(lpfc_debugfs_enable, "Enable debugfs services"); + +/* This MUST be a power of 2 */ +static int lpfc_debugfs_max_disc_trc; +module_param(lpfc_debugfs_max_disc_trc, int, S_IRUGO); +MODULE_PARM_DESC(lpfc_debugfs_max_disc_trc, + "Set debugfs discovery trace depth"); + +/* This MUST be a power of 2 */ +static int lpfc_debugfs_max_slow_ring_trc; +module_param(lpfc_debugfs_max_slow_ring_trc, int, S_IRUGO); +MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc, + "Set debugfs slow ring trace depth"); + +static int lpfc_debugfs_mask_disc_trc; +module_param(lpfc_debugfs_mask_disc_trc, int, S_IRUGO); +MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc, + "Set debugfs discovery trace mask"); + +#include <linux/debugfs.h> + +static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0); +static unsigned long lpfc_debugfs_start_time = 0L; + +/* iDiag */ +static struct lpfc_idiag idiag; + +/** + * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer + * @vport: The vport to gather the log info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine gathers the lpfc discovery debugfs data from the @vport and + * dumps it to @buf up to @size number of bytes. It will start at the next entry + * in the log and process the log until the end of the buffer. Then it will + * gather from the beginning of the log and process until the current entry. + * + * Notes: + * Discovery logging will be disabled while while this routine dumps the log. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ +static int +lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size) +{ + int i, index, len, enable; + uint32_t ms; + struct lpfc_debugfs_trc *dtp; + char *buffer; + + buffer = kmalloc(LPFC_DEBUG_TRC_ENTRY_SIZE, GFP_KERNEL); + if (!buffer) + return 0; + + enable = lpfc_debugfs_enable; + lpfc_debugfs_enable = 0; + + len = 0; + index = (atomic_read(&vport->disc_trc_cnt) + 1) & + (lpfc_debugfs_max_disc_trc - 1); + for (i = index; i < lpfc_debugfs_max_disc_trc; i++) { + dtp = vport->disc_trc + i; + if (!dtp->fmt) + continue; + ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time); + snprintf(buffer, + LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n", + dtp->seq_cnt, ms, dtp->fmt); + len += snprintf(buf+len, size-len, buffer, + dtp->data1, dtp->data2, dtp->data3); + } + for (i = 0; i < index; i++) { + dtp = vport->disc_trc + i; + if (!dtp->fmt) + continue; + ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time); + snprintf(buffer, + LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n", + dtp->seq_cnt, ms, dtp->fmt); + len += snprintf(buf+len, size-len, buffer, + dtp->data1, dtp->data2, dtp->data3); + } + + lpfc_debugfs_enable = enable; + kfree(buffer); + + return len; +} + +/** + * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer + * @phba: The HBA to gather the log info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine gathers the lpfc slow ring debugfs data from the @phba and + * dumps it to @buf up to @size number of bytes. It will start at the next entry + * in the log and process the log until the end of the buffer. Then it will + * gather from the beginning of the log and process until the current entry. + * + * Notes: + * Slow ring logging will be disabled while while this routine dumps the log. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ +static int +lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size) +{ + int i, index, len, enable; + uint32_t ms; + struct lpfc_debugfs_trc *dtp; + char *buffer; + + buffer = kmalloc(LPFC_DEBUG_TRC_ENTRY_SIZE, GFP_KERNEL); + if (!buffer) + return 0; + + enable = lpfc_debugfs_enable; + lpfc_debugfs_enable = 0; + + len = 0; + index = (atomic_read(&phba->slow_ring_trc_cnt) + 1) & + (lpfc_debugfs_max_slow_ring_trc - 1); + for (i = index; i < lpfc_debugfs_max_slow_ring_trc; i++) { + dtp = phba->slow_ring_trc + i; + if (!dtp->fmt) + continue; + ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time); + snprintf(buffer, + LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n", + dtp->seq_cnt, ms, dtp->fmt); + len += snprintf(buf+len, size-len, buffer, + dtp->data1, dtp->data2, dtp->data3); + } + for (i = 0; i < index; i++) { + dtp = phba->slow_ring_trc + i; + if (!dtp->fmt) + continue; + ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time); + snprintf(buffer, + LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n", + dtp->seq_cnt, ms, dtp->fmt); + len += snprintf(buf+len, size-len, buffer, + dtp->data1, dtp->data2, dtp->data3); + } + + lpfc_debugfs_enable = enable; + kfree(buffer); + + return len; +} + +static int lpfc_debugfs_last_hbq = -1; + +/** + * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer + * @phba: The HBA to gather host buffer info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the host buffer queue info from the @phba to @buf up to + * @size number of bytes. A header that describes the current hbq state will be + * dumped to @buf first and then info on each hbq entry will be dumped to @buf + * until @size bytes have been dumped or all the hbq info has been dumped. + * + * Notes: + * This routine will rotate through each configured HBQ each time called. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ +static int +lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) +{ + int len = 0; + int i, j, found, posted, low; + uint32_t phys, raw_index, getidx; + struct lpfc_hbq_init *hip; + struct hbq_s *hbqs; + struct lpfc_hbq_entry *hbqe; + struct lpfc_dmabuf *d_buf; + struct hbq_dmabuf *hbq_buf; + + if (phba->sli_rev != 3) + return 0; + + spin_lock_irq(&phba->hbalock); + + /* toggle between multiple hbqs, if any */ + i = lpfc_sli_hbq_count(); + if (i > 1) { + lpfc_debugfs_last_hbq++; + if (lpfc_debugfs_last_hbq >= i) + lpfc_debugfs_last_hbq = 0; + } + else + lpfc_debugfs_last_hbq = 0; + + i = lpfc_debugfs_last_hbq; + + len += snprintf(buf+len, size-len, "HBQ %d Info\n", i); + + hbqs = &phba->hbqs[i]; + posted = 0; + list_for_each_entry(d_buf, &hbqs->hbq_buffer_list, list) + posted++; + + hip = lpfc_hbq_defs[i]; + len += snprintf(buf+len, size-len, + "idx:%d prof:%d rn:%d bufcnt:%d icnt:%d acnt:%d posted %d\n", + hip->hbq_index, hip->profile, hip->rn, + hip->buffer_count, hip->init_count, hip->add_count, posted); + + raw_index = phba->hbq_get[i]; + getidx = le32_to_cpu(raw_index); + len += snprintf(buf+len, size-len, + "entrys:%d bufcnt:%d Put:%d nPut:%d localGet:%d hbaGet:%d\n", + hbqs->entry_count, hbqs->buffer_count, hbqs->hbqPutIdx, + hbqs->next_hbqPutIdx, hbqs->local_hbqGetIdx, getidx); + + hbqe = (struct lpfc_hbq_entry *) phba->hbqs[i].hbq_virt; + for (j=0; j<hbqs->entry_count; j++) { + len += snprintf(buf+len, size-len, + "%03d: %08x %04x %05x ", j, + le32_to_cpu(hbqe->bde.addrLow), + le32_to_cpu(hbqe->bde.tus.w), + le32_to_cpu(hbqe->buffer_tag)); + i = 0; + found = 0; + + /* First calculate if slot has an associated posted buffer */ + low = hbqs->hbqPutIdx - posted; + if (low >= 0) { + if ((j >= hbqs->hbqPutIdx) || (j < low)) { + len += snprintf(buf+len, size-len, "Unused\n"); + goto skipit; + } + } + else { + if ((j >= hbqs->hbqPutIdx) && + (j < (hbqs->entry_count+low))) { + len += snprintf(buf+len, size-len, "Unused\n"); + goto skipit; + } + } + + /* Get the Buffer info for the posted buffer */ + list_for_each_entry(d_buf, &hbqs->hbq_buffer_list, list) { + hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf); + phys = ((uint64_t)hbq_buf->dbuf.phys & 0xffffffff); + if (phys == le32_to_cpu(hbqe->bde.addrLow)) { + len += snprintf(buf+len, size-len, + "Buf%d: %p %06x\n", i, + hbq_buf->dbuf.virt, hbq_buf->tag); + found = 1; + break; + } + i++; + } + if (!found) { + len += snprintf(buf+len, size-len, "No DMAinfo?\n"); + } +skipit: + hbqe++; + if (len > LPFC_HBQINFO_SIZE - 54) + break; + } + spin_unlock_irq(&phba->hbalock); + return len; +} + +static int lpfc_debugfs_last_hba_slim_off; + +/** + * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer + * @phba: The HBA to gather SLIM info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the current contents of HBA SLIM for the HBA associated + * with @phba to @buf up to @size bytes of data. This is the raw HBA SLIM data. + * + * Notes: + * This routine will only dump up to 1024 bytes of data each time called and + * should be called multiple times to dump the entire HBA SLIM. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ +static int +lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) +{ + int len = 0; + int i, off; + uint32_t *ptr; + char *buffer; + + buffer = kmalloc(1024, GFP_KERNEL); + if (!buffer) + return 0; + + off = 0; + spin_lock_irq(&phba->hbalock); + + len += snprintf(buf+len, size-len, "HBA SLIM\n"); + lpfc_memcpy_from_slim(buffer, + phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024); + + ptr = (uint32_t *)&buffer[0]; + off = lpfc_debugfs_last_hba_slim_off; + + /* Set it up for the next time */ + lpfc_debugfs_last_hba_slim_off += 1024; + if (lpfc_debugfs_last_hba_slim_off >= 4096) + lpfc_debugfs_last_hba_slim_off = 0; + + i = 1024; + while (i > 0) { + len += snprintf(buf+len, size-len, + "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n", + off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4), + *(ptr+5), *(ptr+6), *(ptr+7)); + ptr += 8; + i -= (8 * sizeof(uint32_t)); + off += (8 * sizeof(uint32_t)); + } + + spin_unlock_irq(&phba->hbalock); + kfree(buffer); + + return len; +} + +/** + * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer + * @phba: The HBA to gather Host SLIM info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the current contents of host SLIM for the host associated + * with @phba to @buf up to @size bytes of data. The dump will contain the + * Mailbox, PCB, Rings, and Registers that are located in host memory. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ +static int +lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) +{ + int len = 0; + int i, off; + uint32_t word0, word1, word2, word3; + uint32_t *ptr; + struct lpfc_pgp *pgpp; + struct lpfc_sli *psli = &phba->sli; + struct lpfc_sli_ring *pring; + + off = 0; + spin_lock_irq(&phba->hbalock); + + len += snprintf(buf+len, size-len, "SLIM Mailbox\n"); + ptr = (uint32_t *)phba->slim2p.virt; + i = sizeof(MAILBOX_t); + while (i > 0) { + len += snprintf(buf+len, size-len, + "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n", + off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4), + *(ptr+5), *(ptr+6), *(ptr+7)); + ptr += 8; + i -= (8 * sizeof(uint32_t)); + off += (8 * sizeof(uint32_t)); + } + + len += snprintf(buf+len, size-len, "SLIM PCB\n"); + ptr = (uint32_t *)phba->pcb; + i = sizeof(PCB_t); + while (i > 0) { + len += snprintf(buf+len, size-len, + "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n", + off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4), + *(ptr+5), *(ptr+6), *(ptr+7)); + ptr += 8; + i -= (8 * sizeof(uint32_t)); + off += (8 * sizeof(uint32_t)); + } + + for (i = 0; i < 4; i++) { + pgpp = &phba->port_gp[i]; + pring = &psli->ring[i]; + len += snprintf(buf+len, size-len, + "Ring %d: CMD GetInx:%d (Max:%d Next:%d " + "Local:%d flg:x%x) RSP PutInx:%d Max:%d\n", + i, pgpp->cmdGetInx, pring->sli.sli3.numCiocb, + pring->sli.sli3.next_cmdidx, + pring->sli.sli3.local_getidx, + pring->flag, pgpp->rspPutInx, + pring->sli.sli3.numRiocb); + } + + if (phba->sli_rev <= LPFC_SLI_REV3) { + word0 = readl(phba->HAregaddr); + word1 = readl(phba->CAregaddr); + word2 = readl(phba->HSregaddr); + word3 = readl(phba->HCregaddr); + len += snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x " + "HC:%08x\n", word0, word1, word2, word3); + } + spin_unlock_irq(&phba->hbalock); + return len; +} + +/** + * lpfc_debugfs_nodelist_data - Dump target node list to a buffer + * @vport: The vport to gather target node info from. + * @buf: The buffer to dump log into. + * @size: The maximum amount of data to process. + * + * Description: + * This routine dumps the current target node list associated with @vport to + * @buf up to @size bytes of data. Each node entry in the dump will contain a + * node state, DID, WWPN, WWNN, RPI, flags, type, and other useful fields. + * + * Return Value: + * This routine returns the amount of bytes that were dumped into @buf and will + * not exceed @size. + **/ +static int +lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) +{ + int len = 0; + int cnt; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_nodelist *ndlp; + unsigned char *statep, *name; + + cnt = (LPFC_NODELIST_SIZE / LPFC_NODELIST_ENTRY_SIZE); + + spin_lock_irq(shost->host_lock); + list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { + if (!cnt) { + len += snprintf(buf+len, size-len, + "Missing Nodelist Entries\n"); + break; + } + cnt--; + switch (ndlp->nlp_state) { + case NLP_STE_UNUSED_NODE: + statep = "UNUSED"; + break; + case NLP_STE_PLOGI_ISSUE: + statep = "PLOGI "; + break; + case NLP_STE_ADISC_ISSUE: + statep = "ADISC "; + break; + case NLP_STE_REG_LOGIN_ISSUE: + statep = "REGLOG"; + break; + case NLP_STE_PRLI_ISSUE: + statep = "PRLI "; + break; + case NLP_STE_LOGO_ISSUE: + statep = "LOGO "; + break; + case NLP_STE_UNMAPPED_NODE: + statep = "UNMAP "; + break; + case NLP_STE_MAPPED_NODE: + statep = "MAPPED"; + break; + case NLP_STE_NPR_NODE: + statep = "NPR "; + break; + default: + statep = "UNKNOWN"; + } + len += snprintf(buf+len, size-len, "%s DID:x%06x ", + statep, ndlp->nlp_DID); + name = (unsigned char *)&ndlp->nlp_portname; + len += snprintf(buf+len, size-len, + "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ", + *name, *(name+1), *(name+2), *(name+3), + *(name+4), *(name+5), *(name+6), *(name+7)); + name = (unsigned char *)&ndlp->nlp_nodename; + len += snprintf(buf+len, size-len, + "WWNN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ", + *name, *(name+1), *(name+2), *(name+3), + *(name+4), *(name+5), *(name+6), *(name+7)); + if (ndlp->nlp_flag & NLP_RPI_REGISTERED) + len += snprintf(buf+len, size-len, "RPI:%03d ", + ndlp->nlp_rpi); + else + len += snprintf(buf+len, size-len, "RPI:none "); + len += snprintf(buf+len, size-len, "flag:x%08x ", + ndlp->nlp_flag); + if (!ndlp->nlp_type) + len += snprintf(buf+len, size-len, "UNKNOWN_TYPE "); + if (ndlp->nlp_type & NLP_FC_NODE) + len += snprintf(buf+len, size-len, "FC_NODE "); + if (ndlp->nlp_type & NLP_FABRIC) + len += snprintf(buf+len, size-len, "FABRIC "); + if (ndlp->nlp_type & NLP_FCP_TARGET) + len += snprintf(buf+len, size-len, "FCP_TGT sid:%d ", + ndlp->nlp_sid); + if (ndlp->nlp_type & NLP_FCP_INITIATOR) + len += snprintf(buf+len, size-len, "FCP_INITIATOR "); + len += snprintf(buf+len, size-len, "usgmap:%x ", + ndlp->nlp_usg_map); + len += snprintf(buf+len, size-len, "refcnt:%x", + atomic_read(&ndlp->kref.refcount)); + len += snprintf(buf+len, size-len, "\n"); + } + spin_unlock_irq(shost->host_lock); + return len; +} +#endif + +/** + * lpfc_debugfs_disc_trc - Store discovery trace log + * @vport: The vport to associate this trace string with for retrieval. + * @mask: Log entry classification. + * @fmt: Format string to be displayed when dumping the log. + * @data1: 1st data parameter to be applied to @fmt. + * @data2: 2nd data parameter to be applied to @fmt. + * @data3: 3rd data parameter to be applied to @fmt. + * + * Description: + * This routine is used by the driver code to add a debugfs log entry to the + * discovery trace buffer associated with @vport. Only entries with a @mask that + * match the current debugfs discovery mask will be saved. Entries that do not + * match will be thrown away. @fmt, @data1, @data2, and @data3 are used like + * printf when displaying the log. + **/ +inline void +lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt, + uint32_t data1, uint32_t data2, uint32_t data3) +{ +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + struct lpfc_debugfs_trc *dtp; + int index; + + if (!(lpfc_debugfs_mask_disc_trc & mask)) + return; + + if (!lpfc_debugfs_enable || !lpfc_debugfs_max_disc_trc || + !vport || !vport->disc_trc) + return; + + index = atomic_inc_return(&vport->disc_trc_cnt) & + (lpfc_debugfs_max_disc_trc - 1); + dtp = vport->disc_trc + index; + dtp->fmt = fmt; + dtp->data1 = data1; + dtp->data2 = data2; + dtp->data3 = data3; + dtp->seq_cnt = atomic_inc_return(&lpfc_debugfs_seq_trc_cnt); + dtp->jif = jiffies; +#endif + return; +} + +/** + * lpfc_debugfs_slow_ring_trc - Store slow ring trace log + * @phba: The phba to associate this trace string with for retrieval. + * @fmt: Format string to be displayed when dumping the log. + * @data1: 1st data parameter to be applied to @fmt. + * @data2: 2nd data parameter to be applied to @fmt. + * @data3: 3rd data parameter to be applied to @fmt. + * + * Description: + * This routine is used by the driver code to add a debugfs log entry to the + * discovery trace buffer associated with @vport. @fmt, @data1, @data2, and + * @data3 are used like printf when displaying the log. + **/ +inline void +lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt, + uint32_t data1, uint32_t data2, uint32_t data3) +{ +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + struct lpfc_debugfs_trc *dtp; + int index; + + if (!lpfc_debugfs_enable || !lpfc_debugfs_max_slow_ring_trc || + !phba || !phba->slow_ring_trc) + return; + + index = atomic_inc_return(&phba->slow_ring_trc_cnt) & + (lpfc_debugfs_max_slow_ring_trc - 1); + dtp = phba->slow_ring_trc + index; + dtp->fmt = fmt; + dtp->data1 = data1; + dtp->data2 = data2; + dtp->data3 = data3; + dtp->seq_cnt = atomic_inc_return(&lpfc_debugfs_seq_trc_cnt); + dtp->jif = jiffies; +#endif + return; +} + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS +/** + * lpfc_debugfs_disc_trc_open - Open the discovery trace log + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ +static int +lpfc_debugfs_disc_trc_open(struct inode *inode, struct file *file) +{ + struct lpfc_vport *vport = inode->i_private; + struct lpfc_debug *debug; + int size; + int rc = -ENOMEM; + + if (!lpfc_debugfs_max_disc_trc) { + rc = -ENOSPC; + goto out; + } + + debug = kmalloc(sizeof(*debug), GFP_KERNEL); + if (!debug) + goto out; + + /* Round to page boundary */ + size = (lpfc_debugfs_max_disc_trc * LPFC_DEBUG_TRC_ENTRY_SIZE); + size = PAGE_ALIGN(size); + + debug->buffer = kmalloc(size, GFP_KERNEL); + if (!debug->buffer) { + kfree(debug); + goto out; + } + + debug->len = lpfc_debugfs_disc_trc_data(vport, debug->buffer, size); + file->private_data = debug; + + rc = 0; +out: + return rc; +} + +/** + * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ +static int +lpfc_debugfs_slow_ring_trc_open(struct inode *inode, struct file *file) +{ + struct lpfc_hba *phba = inode->i_private; + struct lpfc_debug *debug; + int size; + int rc = -ENOMEM; + + if (!lpfc_debugfs_max_slow_ring_trc) { + rc = -ENOSPC; + goto out; + } + + debug = kmalloc(sizeof(*debug), GFP_KERNEL); + if (!debug) + goto out; + + /* Round to page boundary */ + size = (lpfc_debugfs_max_slow_ring_trc * LPFC_DEBUG_TRC_ENTRY_SIZE); + size = PAGE_ALIGN(size); + + debug->buffer = kmalloc(size, GFP_KERNEL); + if (!debug->buffer) { + kfree(debug); + goto out; + } + + debug->len = lpfc_debugfs_slow_ring_trc_data(phba, debug->buffer, size); + file->private_data = debug; + + rc = 0; +out: + return rc; +} + +/** + * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ +static int +lpfc_debugfs_hbqinfo_open(struct inode *inode, struct file *file) +{ + struct lpfc_hba *phba = inode->i_private; + struct lpfc_debug *debug; + int rc = -ENOMEM; + + debug = kmalloc(sizeof(*debug), GFP_KERNEL); + if (!debug) + goto out; + + /* Round to page boundary */ + debug->buffer = kmalloc(LPFC_HBQINFO_SIZE, GFP_KERNEL); + if (!debug->buffer) { + kfree(debug); + goto out; + } + + debug->len = lpfc_debugfs_hbqinfo_data(phba, debug->buffer, + LPFC_HBQINFO_SIZE); + file->private_data = debug; + + rc = 0; +out: + return rc; +} + +/** + * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ +static int +lpfc_debugfs_dumpHBASlim_open(struct inode *inode, struct file *file) +{ + struct lpfc_hba *phba = inode->i_private; + struct lpfc_debug *debug; + int rc = -ENOMEM; + + debug = kmalloc(sizeof(*debug), GFP_KERNEL); + if (!debug) + goto out; + + /* Round to page boundary */ + debug->buffer = kmalloc(LPFC_DUMPHBASLIM_SIZE, GFP_KERNEL); + if (!debug->buffer) { + kfree(debug); + goto out; + } + + debug->len = lpfc_debugfs_dumpHBASlim_data(phba, debug->buffer, + LPFC_DUMPHBASLIM_SIZE); + file->private_data = debug; + + rc = 0; +out: + return rc; +} + +/** + * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ +static int +lpfc_debugfs_dumpHostSlim_open(struct inode *inode, struct file *file) +{ + struct lpfc_hba *phba = inode->i_private; + struct lpfc_debug *debug; + int rc = -ENOMEM; + + debug = kmalloc(sizeof(*debug), GFP_KERNEL); + if (!debug) + goto out; + + /* Round to page boundary */ + debug->buffer = kmalloc(LPFC_DUMPHOSTSLIM_SIZE, GFP_KERNEL); + if (!debug->buffer) { + kfree(debug); + goto out; + } + + debug->len = lpfc_debugfs_dumpHostSlim_data(phba, debug->buffer, + LPFC_DUMPHOSTSLIM_SIZE); + file->private_data = debug; + + rc = 0; +out: + return rc; +} + +static int +lpfc_debugfs_dumpData_open(struct inode *inode, struct file *file) +{ + struct lpfc_debug *debug; + int rc = -ENOMEM; + + if (!_dump_buf_data) + return -EBUSY; + + debug = kmalloc(sizeof(*debug), GFP_KERNEL); + if (!debug) + goto out; + + /* Round to page boundary */ + printk(KERN_ERR "9059 BLKGRD: %s: _dump_buf_data=0x%p\n", + __func__, _dump_buf_data); + debug->buffer = _dump_buf_data; + if (!debug->buffer) { + kfree(debug); + goto out; + } + + debug->len = (1 << _dump_buf_data_order) << PAGE_SHIFT; + file->private_data = debug; + + rc = 0; +out: + return rc; +} + +static int +lpfc_debugfs_dumpDif_open(struct inode *inode, struct file *file) +{ + struct lpfc_debug *debug; + int rc = -ENOMEM; + + if (!_dump_buf_dif) + return -EBUSY; + + debug = kmalloc(sizeof(*debug), GFP_KERNEL); + if (!debug) + goto out; + + /* Round to page boundary */ + printk(KERN_ERR "9060 BLKGRD: %s: _dump_buf_dif=0x%p file=%pD\n", + __func__, _dump_buf_dif, file); + debug->buffer = _dump_buf_dif; + if (!debug->buffer) { + kfree(debug); + goto out; + } + + debug->len = (1 << _dump_buf_dif_order) << PAGE_SHIFT; + file->private_data = debug; + + rc = 0; +out: + return rc; +} + +static ssize_t +lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + /* + * The Data/DIF buffers only save one failing IO + * The write op is used as a reset mechanism after an IO has + * already been saved to the next one can be saved + */ + spin_lock(&_dump_buf_lock); + + memset((void *)_dump_buf_data, 0, + ((1 << PAGE_SHIFT) << _dump_buf_data_order)); + memset((void *)_dump_buf_dif, 0, + ((1 << PAGE_SHIFT) << _dump_buf_dif_order)); + + _dump_buf_done = 0; + + spin_unlock(&_dump_buf_lock); + + return nbytes; +} + +static ssize_t +lpfc_debugfs_dif_err_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct dentry *dent = file->f_path.dentry; + struct lpfc_hba *phba = file->private_data; + char cbuf[32]; + uint64_t tmp = 0; + int cnt = 0; + + if (dent == phba->debug_writeGuard) + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wgrd_cnt); + else if (dent == phba->debug_writeApp) + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wapp_cnt); + else if (dent == phba->debug_writeRef) + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wref_cnt); + else if (dent == phba->debug_readGuard) + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rgrd_cnt); + else if (dent == phba->debug_readApp) + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rapp_cnt); + else if (dent == phba->debug_readRef) + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rref_cnt); + else if (dent == phba->debug_InjErrNPortID) + cnt = snprintf(cbuf, 32, "0x%06x\n", phba->lpfc_injerr_nportid); + else if (dent == phba->debug_InjErrWWPN) { + memcpy(&tmp, &phba->lpfc_injerr_wwpn, sizeof(struct lpfc_name)); + tmp = cpu_to_be64(tmp); + cnt = snprintf(cbuf, 32, "0x%016llx\n", tmp); + } else if (dent == phba->debug_InjErrLBA) { + if (phba->lpfc_injerr_lba == (sector_t)(-1)) + cnt = snprintf(cbuf, 32, "off\n"); + else + cnt = snprintf(cbuf, 32, "0x%llx\n", + (uint64_t) phba->lpfc_injerr_lba); + } else + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0547 Unknown debugfs error injection entry\n"); + + return simple_read_from_buffer(buf, nbytes, ppos, &cbuf, cnt); +} + +static ssize_t +lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct dentry *dent = file->f_path.dentry; + struct lpfc_hba *phba = file->private_data; + char dstbuf[32]; + uint64_t tmp = 0; + int size; + + memset(dstbuf, 0, 32); + size = (nbytes < 32) ? nbytes : 32; + if (copy_from_user(dstbuf, buf, size)) + return 0; + + if (dent == phba->debug_InjErrLBA) { + if ((buf[0] == 'o') && (buf[1] == 'f') && (buf[2] == 'f')) + tmp = (uint64_t)(-1); + } + + if ((tmp == 0) && (kstrtoull(dstbuf, 0, &tmp))) + return 0; + + if (dent == phba->debug_writeGuard) + phba->lpfc_injerr_wgrd_cnt = (uint32_t)tmp; + else if (dent == phba->debug_writeApp) + phba->lpfc_injerr_wapp_cnt = (uint32_t)tmp; + else if (dent == phba->debug_writeRef) + phba->lpfc_injerr_wref_cnt = (uint32_t)tmp; + else if (dent == phba->debug_readGuard) + phba->lpfc_injerr_rgrd_cnt = (uint32_t)tmp; + else if (dent == phba->debug_readApp) + phba->lpfc_injerr_rapp_cnt = (uint32_t)tmp; + else if (dent == phba->debug_readRef) + phba->lpfc_injerr_rref_cnt = (uint32_t)tmp; + else if (dent == phba->debug_InjErrLBA) + phba->lpfc_injerr_lba = (sector_t)tmp; + else if (dent == phba->debug_InjErrNPortID) + phba->lpfc_injerr_nportid = (uint32_t)(tmp & Mask_DID); + else if (dent == phba->debug_InjErrWWPN) { + tmp = cpu_to_be64(tmp); + memcpy(&phba->lpfc_injerr_wwpn, &tmp, sizeof(struct lpfc_name)); + } else + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0548 Unknown debugfs error injection entry\n"); + + return nbytes; +} + +static int +lpfc_debugfs_dif_err_release(struct inode *inode, struct file *file) +{ + return 0; +} + +/** + * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file + * @inode: The inode pointer that contains a vport pointer. + * @file: The file pointer to attach the log output. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It gets + * the vport from the i_private field in @inode, allocates the necessary buffer + * for the log, fills the buffer from the in-memory log for this vport, and then + * returns a pointer to that log in the private_data field in @file. + * + * Returns: + * This function returns zero if successful. On error it will return an negative + * error value. + **/ +static int +lpfc_debugfs_nodelist_open(struct inode *inode, struct file *file) +{ + struct lpfc_vport *vport = inode->i_private; + struct lpfc_debug *debug; + int rc = -ENOMEM; + + debug = kmalloc(sizeof(*debug), GFP_KERNEL); + if (!debug) + goto out; + + /* Round to page boundary */ + debug->buffer = kmalloc(LPFC_NODELIST_SIZE, GFP_KERNEL); + if (!debug->buffer) { + kfree(debug); + goto out; + } + + debug->len = lpfc_debugfs_nodelist_data(vport, debug->buffer, + LPFC_NODELIST_SIZE); + file->private_data = debug; + + rc = 0; +out: + return rc; +} + +/** + * lpfc_debugfs_lseek - Seek through a debugfs file + * @file: The file pointer to seek through. + * @off: The offset to seek to or the amount to seek by. + * @whence: Indicates how to seek. + * + * Description: + * This routine is the entry point for the debugfs lseek file operation. The + * @whence parameter indicates whether @off is the offset to directly seek to, + * or if it is a value to seek forward or reverse by. This function figures out + * what the new offset of the debugfs file will be and assigns that value to the + * f_pos field of @file. + * + * Returns: + * This function returns the new offset if successful and returns a negative + * error if unable to process the seek. + **/ +static loff_t +lpfc_debugfs_lseek(struct file *file, loff_t off, int whence) +{ + struct lpfc_debug *debug = file->private_data; + return fixed_size_llseek(file, off, whence, debug->len); +} + +/** + * lpfc_debugfs_read - Read a debugfs file + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from from the buffer indicated in the private_data + * field of @file. It will start reading at @ppos and copy up to @nbytes of + * data to @buf. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_debugfs_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + + return simple_read_from_buffer(buf, nbytes, ppos, debug->buffer, + debug->len); +} + +/** + * lpfc_debugfs_release - Release the buffer used to store debugfs file data + * @inode: The inode pointer that contains a vport pointer. (unused) + * @file: The file pointer that contains the buffer to release. + * + * Description: + * This routine frees the buffer that was allocated when the debugfs file was + * opened. + * + * Returns: + * This function returns zero. + **/ +static int +lpfc_debugfs_release(struct inode *inode, struct file *file) +{ + struct lpfc_debug *debug = file->private_data; + + kfree(debug->buffer); + kfree(debug); + + return 0; +} + +static int +lpfc_debugfs_dumpDataDif_release(struct inode *inode, struct file *file) +{ + struct lpfc_debug *debug = file->private_data; + + debug->buffer = NULL; + kfree(debug); + + return 0; +} + +/* + * --------------------------------- + * iDiag debugfs file access methods + * --------------------------------- + * + * All access methods are through the proper SLI4 PCI function's debugfs + * iDiag directory: + * + * /sys/kernel/debug/lpfc/fn<#>/iDiag + */ + +/** + * lpfc_idiag_cmd_get - Get and parse idiag debugfs comands from user space + * @buf: The pointer to the user space buffer. + * @nbytes: The number of bytes in the user space buffer. + * @idiag_cmd: pointer to the idiag command struct. + * + * This routine reads data from debugfs user space buffer and parses the + * buffer for getting the idiag command and arguments. The while space in + * between the set of data is used as the parsing separator. + * + * This routine returns 0 when successful, it returns proper error code + * back to the user space in error conditions. + */ +static int lpfc_idiag_cmd_get(const char __user *buf, size_t nbytes, + struct lpfc_idiag_cmd *idiag_cmd) +{ + char mybuf[64]; + char *pbuf, *step_str; + int i; + size_t bsize; + + /* Protect copy from user */ + if (!access_ok(VERIFY_READ, buf, nbytes)) + return -EFAULT; + + memset(mybuf, 0, sizeof(mybuf)); + memset(idiag_cmd, 0, sizeof(*idiag_cmd)); + bsize = min(nbytes, (sizeof(mybuf)-1)); + + if (copy_from_user(mybuf, buf, bsize)) + return -EFAULT; + pbuf = &mybuf[0]; + step_str = strsep(&pbuf, "\t "); + + /* The opcode must present */ + if (!step_str) + return -EINVAL; + + idiag_cmd->opcode = simple_strtol(step_str, NULL, 0); + if (idiag_cmd->opcode == 0) + return -EINVAL; + + for (i = 0; i < LPFC_IDIAG_CMD_DATA_SIZE; i++) { + step_str = strsep(&pbuf, "\t "); + if (!step_str) + return i; + idiag_cmd->data[i] = simple_strtol(step_str, NULL, 0); + } + return i; +} + +/** + * lpfc_idiag_open - idiag open debugfs + * @inode: The inode pointer that contains a pointer to phba. + * @file: The file pointer to attach the file operation. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It + * gets the reference to phba from the i_private field in @inode, it then + * allocates buffer for the file operation, performs the necessary PCI config + * space read into the allocated buffer according to the idiag user command + * setup, and then returns a pointer to buffer in the private_data field in + * @file. + * + * Returns: + * This function returns zero if successful. On error it will return an + * negative error value. + **/ +static int +lpfc_idiag_open(struct inode *inode, struct file *file) +{ + struct lpfc_debug *debug; + + debug = kmalloc(sizeof(*debug), GFP_KERNEL); + if (!debug) + return -ENOMEM; + + debug->i_private = inode->i_private; + debug->buffer = NULL; + file->private_data = debug; + + return 0; +} + +/** + * lpfc_idiag_release - Release idiag access file operation + * @inode: The inode pointer that contains a vport pointer. (unused) + * @file: The file pointer that contains the buffer to release. + * + * Description: + * This routine is the generic release routine for the idiag access file + * operation, it frees the buffer that was allocated when the debugfs file + * was opened. + * + * Returns: + * This function returns zero. + **/ +static int +lpfc_idiag_release(struct inode *inode, struct file *file) +{ + struct lpfc_debug *debug = file->private_data; + + /* Free the buffers to the file operation */ + kfree(debug->buffer); + kfree(debug); + + return 0; +} + +/** + * lpfc_idiag_cmd_release - Release idiag cmd access file operation + * @inode: The inode pointer that contains a vport pointer. (unused) + * @file: The file pointer that contains the buffer to release. + * + * Description: + * This routine frees the buffer that was allocated when the debugfs file + * was opened. It also reset the fields in the idiag command struct in the + * case of command for write operation. + * + * Returns: + * This function returns zero. + **/ +static int +lpfc_idiag_cmd_release(struct inode *inode, struct file *file) +{ + struct lpfc_debug *debug = file->private_data; + + if (debug->op == LPFC_IDIAG_OP_WR) { + switch (idiag.cmd.opcode) { + case LPFC_IDIAG_CMD_PCICFG_WR: + case LPFC_IDIAG_CMD_PCICFG_ST: + case LPFC_IDIAG_CMD_PCICFG_CL: + case LPFC_IDIAG_CMD_QUEACC_WR: + case LPFC_IDIAG_CMD_QUEACC_ST: + case LPFC_IDIAG_CMD_QUEACC_CL: + memset(&idiag, 0, sizeof(idiag)); + break; + default: + break; + } + } + + /* Free the buffers to the file operation */ + kfree(debug->buffer); + kfree(debug); + + return 0; +} + +/** + * lpfc_idiag_pcicfg_read - idiag debugfs read pcicfg + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the @phba pci config space according to the + * idiag command, and copies to user @buf. Depending on the PCI config space + * read command setup, it does either a single register read of a byte + * (8 bits), a word (16 bits), or a dword (32 bits) or browsing through all + * registers from the 4K extended PCI config space. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + int offset_label, offset, len = 0, index = LPFC_PCI_CFG_RD_SIZE; + int where, count; + char *pbuffer; + struct pci_dev *pdev; + uint32_t u32val; + uint16_t u16val; + uint8_t u8val; + + pdev = phba->pcidev; + if (!pdev) + return 0; + + /* This is a user read operation */ + debug->op = LPFC_IDIAG_OP_RD; + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_PCI_CFG_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + + if (*ppos) + return 0; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) { + where = idiag.cmd.data[IDIAG_PCICFG_WHERE_INDX]; + count = idiag.cmd.data[IDIAG_PCICFG_COUNT_INDX]; + } else + return 0; + + /* Read single PCI config space register */ + switch (count) { + case SIZE_U8: /* byte (8 bits) */ + pci_read_config_byte(pdev, where, &u8val); + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "%03x: %02x\n", where, u8val); + break; + case SIZE_U16: /* word (16 bits) */ + pci_read_config_word(pdev, where, &u16val); + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "%03x: %04x\n", where, u16val); + break; + case SIZE_U32: /* double word (32 bits) */ + pci_read_config_dword(pdev, where, &u32val); + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "%03x: %08x\n", where, u32val); + break; + case LPFC_PCI_CFG_BROWSE: /* browse all */ + goto pcicfg_browse; + break; + default: + /* illegal count */ + len = 0; + break; + } + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); + +pcicfg_browse: + + /* Browse all PCI config space registers */ + offset_label = idiag.offset.last_rd; + offset = offset_label; + + /* Read PCI config space */ + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "%03x: ", offset_label); + while (index > 0) { + pci_read_config_dword(pdev, offset, &u32val); + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "%08x ", u32val); + offset += sizeof(uint32_t); + if (offset >= LPFC_PCI_CFG_SIZE) { + len += snprintf(pbuffer+len, + LPFC_PCI_CFG_SIZE-len, "\n"); + break; + } + index -= sizeof(uint32_t); + if (!index) + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "\n"); + else if (!(index % (8 * sizeof(uint32_t)))) { + offset_label += (8 * sizeof(uint32_t)); + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "\n%03x: ", offset_label); + } + } + + /* Set up the offset for next portion of pci cfg read */ + if (index == 0) { + idiag.offset.last_rd += LPFC_PCI_CFG_RD_SIZE; + if (idiag.offset.last_rd >= LPFC_PCI_CFG_SIZE) + idiag.offset.last_rd = 0; + } else + idiag.offset.last_rd = 0; + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + +/** + * lpfc_idiag_pcicfg_write - Syntax check and set up idiag pcicfg commands + * @file: The file pointer to read from. + * @buf: The buffer to copy the user data from. + * @nbytes: The number of bytes to get. + * @ppos: The position in the file to start reading from. + * + * This routine get the debugfs idiag command struct from user space and + * then perform the syntax check for PCI config space read or write command + * accordingly. In the case of PCI config space read command, it sets up + * the command in the idiag command struct for the debugfs read operation. + * In the case of PCI config space write operation, it executes the write + * operation into the PCI config space accordingly. + * + * It returns the @nbytges passing in from debugfs user space when successful. + * In case of error conditions, it returns proper error code back to the user + * space. + */ +static ssize_t +lpfc_idiag_pcicfg_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + uint32_t where, value, count; + uint32_t u32val; + uint16_t u16val; + uint8_t u8val; + struct pci_dev *pdev; + int rc; + + pdev = phba->pcidev; + if (!pdev) + return -EFAULT; + + /* This is a user write operation */ + debug->op = LPFC_IDIAG_OP_WR; + + rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); + if (rc < 0) + return rc; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) { + /* Sanity check on PCI config read command line arguments */ + if (rc != LPFC_PCI_CFG_RD_CMD_ARG) + goto error_out; + /* Read command from PCI config space, set up command fields */ + where = idiag.cmd.data[IDIAG_PCICFG_WHERE_INDX]; + count = idiag.cmd.data[IDIAG_PCICFG_COUNT_INDX]; + if (count == LPFC_PCI_CFG_BROWSE) { + if (where % sizeof(uint32_t)) + goto error_out; + /* Starting offset to browse */ + idiag.offset.last_rd = where; + } else if ((count != sizeof(uint8_t)) && + (count != sizeof(uint16_t)) && + (count != sizeof(uint32_t))) + goto error_out; + if (count == sizeof(uint8_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t)) + goto error_out; + if (where % sizeof(uint8_t)) + goto error_out; + } + if (count == sizeof(uint16_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t)) + goto error_out; + if (where % sizeof(uint16_t)) + goto error_out; + } + if (count == sizeof(uint32_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t)) + goto error_out; + if (where % sizeof(uint32_t)) + goto error_out; + } + } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { + /* Sanity check on PCI config write command line arguments */ + if (rc != LPFC_PCI_CFG_WR_CMD_ARG) + goto error_out; + /* Write command to PCI config space, read-modify-write */ + where = idiag.cmd.data[IDIAG_PCICFG_WHERE_INDX]; + count = idiag.cmd.data[IDIAG_PCICFG_COUNT_INDX]; + value = idiag.cmd.data[IDIAG_PCICFG_VALUE_INDX]; + /* Sanity checks */ + if ((count != sizeof(uint8_t)) && + (count != sizeof(uint16_t)) && + (count != sizeof(uint32_t))) + goto error_out; + if (count == sizeof(uint8_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t)) + goto error_out; + if (where % sizeof(uint8_t)) + goto error_out; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR) + pci_write_config_byte(pdev, where, + (uint8_t)value); + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) { + rc = pci_read_config_byte(pdev, where, &u8val); + if (!rc) { + u8val |= (uint8_t)value; + pci_write_config_byte(pdev, where, + u8val); + } + } + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { + rc = pci_read_config_byte(pdev, where, &u8val); + if (!rc) { + u8val &= (uint8_t)(~value); + pci_write_config_byte(pdev, where, + u8val); + } + } + } + if (count == sizeof(uint16_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t)) + goto error_out; + if (where % sizeof(uint16_t)) + goto error_out; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR) + pci_write_config_word(pdev, where, + (uint16_t)value); + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) { + rc = pci_read_config_word(pdev, where, &u16val); + if (!rc) { + u16val |= (uint16_t)value; + pci_write_config_word(pdev, where, + u16val); + } + } + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { + rc = pci_read_config_word(pdev, where, &u16val); + if (!rc) { + u16val &= (uint16_t)(~value); + pci_write_config_word(pdev, where, + u16val); + } + } + } + if (count == sizeof(uint32_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t)) + goto error_out; + if (where % sizeof(uint32_t)) + goto error_out; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR) + pci_write_config_dword(pdev, where, value); + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) { + rc = pci_read_config_dword(pdev, where, + &u32val); + if (!rc) { + u32val |= value; + pci_write_config_dword(pdev, where, + u32val); + } + } + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { + rc = pci_read_config_dword(pdev, where, + &u32val); + if (!rc) { + u32val &= ~value; + pci_write_config_dword(pdev, where, + u32val); + } + } + } + } else + /* All other opecodes are illegal for now */ + goto error_out; + + return nbytes; +error_out: + memset(&idiag, 0, sizeof(idiag)); + return -EINVAL; +} + +/** + * lpfc_idiag_baracc_read - idiag debugfs pci bar access read + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the @phba pci bar memory mapped space + * according to the idiag command, and copies to user @buf. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_baracc_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + int offset_label, offset, offset_run, len = 0, index; + int bar_num, acc_range, bar_size; + char *pbuffer; + void __iomem *mem_mapped_bar; + uint32_t if_type; + struct pci_dev *pdev; + uint32_t u32val; + + pdev = phba->pcidev; + if (!pdev) + return 0; + + /* This is a user read operation */ + debug->op = LPFC_IDIAG_OP_RD; + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_PCI_BAR_RD_BUF_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + + if (*ppos) + return 0; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_RD) { + bar_num = idiag.cmd.data[IDIAG_BARACC_BAR_NUM_INDX]; + offset = idiag.cmd.data[IDIAG_BARACC_OFF_SET_INDX]; + acc_range = idiag.cmd.data[IDIAG_BARACC_ACC_MOD_INDX]; + bar_size = idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX]; + } else + return 0; + + if (acc_range == 0) + return 0; + + if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); + if (if_type == LPFC_SLI_INTF_IF_TYPE_0) { + if (bar_num == IDIAG_BARACC_BAR_0) + mem_mapped_bar = phba->sli4_hba.conf_regs_memmap_p; + else if (bar_num == IDIAG_BARACC_BAR_1) + mem_mapped_bar = phba->sli4_hba.ctrl_regs_memmap_p; + else if (bar_num == IDIAG_BARACC_BAR_2) + mem_mapped_bar = phba->sli4_hba.drbl_regs_memmap_p; + else + return 0; + } else if (if_type == LPFC_SLI_INTF_IF_TYPE_2) { + if (bar_num == IDIAG_BARACC_BAR_0) + mem_mapped_bar = phba->sli4_hba.conf_regs_memmap_p; + else + return 0; + } else + return 0; + + /* Read single PCI bar space register */ + if (acc_range == SINGLE_WORD) { + offset_run = offset; + u32val = readl(mem_mapped_bar + offset_run); + len += snprintf(pbuffer+len, LPFC_PCI_BAR_RD_BUF_SIZE-len, + "%05x: %08x\n", offset_run, u32val); + } else + goto baracc_browse; + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); + +baracc_browse: + + /* Browse all PCI bar space registers */ + offset_label = idiag.offset.last_rd; + offset_run = offset_label; + + /* Read PCI bar memory mapped space */ + len += snprintf(pbuffer+len, LPFC_PCI_BAR_RD_BUF_SIZE-len, + "%05x: ", offset_label); + index = LPFC_PCI_BAR_RD_SIZE; + while (index > 0) { + u32val = readl(mem_mapped_bar + offset_run); + len += snprintf(pbuffer+len, LPFC_PCI_BAR_RD_BUF_SIZE-len, + "%08x ", u32val); + offset_run += sizeof(uint32_t); + if (acc_range == LPFC_PCI_BAR_BROWSE) { + if (offset_run >= bar_size) { + len += snprintf(pbuffer+len, + LPFC_PCI_BAR_RD_BUF_SIZE-len, "\n"); + break; + } + } else { + if (offset_run >= offset + + (acc_range * sizeof(uint32_t))) { + len += snprintf(pbuffer+len, + LPFC_PCI_BAR_RD_BUF_SIZE-len, "\n"); + break; + } + } + index -= sizeof(uint32_t); + if (!index) + len += snprintf(pbuffer+len, + LPFC_PCI_BAR_RD_BUF_SIZE-len, "\n"); + else if (!(index % (8 * sizeof(uint32_t)))) { + offset_label += (8 * sizeof(uint32_t)); + len += snprintf(pbuffer+len, + LPFC_PCI_BAR_RD_BUF_SIZE-len, + "\n%05x: ", offset_label); + } + } + + /* Set up the offset for next portion of pci bar read */ + if (index == 0) { + idiag.offset.last_rd += LPFC_PCI_BAR_RD_SIZE; + if (acc_range == LPFC_PCI_BAR_BROWSE) { + if (idiag.offset.last_rd >= bar_size) + idiag.offset.last_rd = 0; + } else { + if (offset_run >= offset + + (acc_range * sizeof(uint32_t))) + idiag.offset.last_rd = offset; + } + } else { + if (acc_range == LPFC_PCI_BAR_BROWSE) + idiag.offset.last_rd = 0; + else + idiag.offset.last_rd = offset; + } + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + +/** + * lpfc_idiag_baracc_write - Syntax check and set up idiag bar access commands + * @file: The file pointer to read from. + * @buf: The buffer to copy the user data from. + * @nbytes: The number of bytes to get. + * @ppos: The position in the file to start reading from. + * + * This routine get the debugfs idiag command struct from user space and + * then perform the syntax check for PCI bar memory mapped space read or + * write command accordingly. In the case of PCI bar memory mapped space + * read command, it sets up the command in the idiag command struct for + * the debugfs read operation. In the case of PCI bar memorpy mapped space + * write operation, it executes the write operation into the PCI bar memory + * mapped space accordingly. + * + * It returns the @nbytges passing in from debugfs user space when successful. + * In case of error conditions, it returns proper error code back to the user + * space. + */ +static ssize_t +lpfc_idiag_baracc_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + uint32_t bar_num, bar_size, offset, value, acc_range; + struct pci_dev *pdev; + void __iomem *mem_mapped_bar; + uint32_t if_type; + uint32_t u32val; + int rc; + + pdev = phba->pcidev; + if (!pdev) + return -EFAULT; + + /* This is a user write operation */ + debug->op = LPFC_IDIAG_OP_WR; + + rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); + if (rc < 0) + return rc; + + if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); + bar_num = idiag.cmd.data[IDIAG_BARACC_BAR_NUM_INDX]; + + if (if_type == LPFC_SLI_INTF_IF_TYPE_0) { + if ((bar_num != IDIAG_BARACC_BAR_0) && + (bar_num != IDIAG_BARACC_BAR_1) && + (bar_num != IDIAG_BARACC_BAR_2)) + goto error_out; + } else if (if_type == LPFC_SLI_INTF_IF_TYPE_2) { + if (bar_num != IDIAG_BARACC_BAR_0) + goto error_out; + } else + goto error_out; + + if (if_type == LPFC_SLI_INTF_IF_TYPE_0) { + if (bar_num == IDIAG_BARACC_BAR_0) { + idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX] = + LPFC_PCI_IF0_BAR0_SIZE; + mem_mapped_bar = phba->sli4_hba.conf_regs_memmap_p; + } else if (bar_num == IDIAG_BARACC_BAR_1) { + idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX] = + LPFC_PCI_IF0_BAR1_SIZE; + mem_mapped_bar = phba->sli4_hba.ctrl_regs_memmap_p; + } else if (bar_num == IDIAG_BARACC_BAR_2) { + idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX] = + LPFC_PCI_IF0_BAR2_SIZE; + mem_mapped_bar = phba->sli4_hba.drbl_regs_memmap_p; + } else + goto error_out; + } else if (if_type == LPFC_SLI_INTF_IF_TYPE_2) { + if (bar_num == IDIAG_BARACC_BAR_0) { + idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX] = + LPFC_PCI_IF2_BAR0_SIZE; + mem_mapped_bar = phba->sli4_hba.conf_regs_memmap_p; + } else + goto error_out; + } else + goto error_out; + + offset = idiag.cmd.data[IDIAG_BARACC_OFF_SET_INDX]; + if (offset % sizeof(uint32_t)) + goto error_out; + + bar_size = idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX]; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_RD) { + /* Sanity check on PCI config read command line arguments */ + if (rc != LPFC_PCI_BAR_RD_CMD_ARG) + goto error_out; + acc_range = idiag.cmd.data[IDIAG_BARACC_ACC_MOD_INDX]; + if (acc_range == LPFC_PCI_BAR_BROWSE) { + if (offset > bar_size - sizeof(uint32_t)) + goto error_out; + /* Starting offset to browse */ + idiag.offset.last_rd = offset; + } else if (acc_range > SINGLE_WORD) { + if (offset + acc_range * sizeof(uint32_t) > bar_size) + goto error_out; + /* Starting offset to browse */ + idiag.offset.last_rd = offset; + } else if (acc_range != SINGLE_WORD) + goto error_out; + } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_CL) { + /* Sanity check on PCI bar write command line arguments */ + if (rc != LPFC_PCI_BAR_WR_CMD_ARG) + goto error_out; + /* Write command to PCI bar space, read-modify-write */ + acc_range = SINGLE_WORD; + value = idiag.cmd.data[IDIAG_BARACC_REG_VAL_INDX]; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_WR) { + writel(value, mem_mapped_bar + offset); + readl(mem_mapped_bar + offset); + } + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_ST) { + u32val = readl(mem_mapped_bar + offset); + u32val |= value; + writel(u32val, mem_mapped_bar + offset); + readl(mem_mapped_bar + offset); + } + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_CL) { + u32val = readl(mem_mapped_bar + offset); + u32val &= ~value; + writel(u32val, mem_mapped_bar + offset); + readl(mem_mapped_bar + offset); + } + } else + /* All other opecodes are illegal for now */ + goto error_out; + + return nbytes; +error_out: + memset(&idiag, 0, sizeof(idiag)); + return -EINVAL; +} + +/** + * lpfc_idiag_queinfo_read - idiag debugfs read queue information + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the @phba SLI4 PCI function queue information, + * and copies to user @buf. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + int len = 0; + char *pbuffer; + int x, cnt; + int max_cnt; + struct lpfc_queue *qp = NULL; + + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_QUE_INFO_GET_BUF_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + max_cnt = LPFC_QUE_INFO_GET_BUF_SIZE - 128; + + if (*ppos) + return 0; + + spin_lock_irq(&phba->hbalock); + + /* Fast-path event queue */ + if (phba->sli4_hba.hba_eq && phba->cfg_fcp_io_channel) { + cnt = phba->cfg_fcp_io_channel; + + for (x = 0; x < cnt; x++) { + + /* Fast-path EQ */ + qp = phba->sli4_hba.hba_eq[x]; + if (!qp) + goto proc_cq; + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\nHBA EQ info: " + "EQ-STAT[max:x%x noE:x%x " + "bs:x%x proc:x%llx]\n", + qp->q_cnt_1, qp->q_cnt_2, + qp->q_cnt_3, (unsigned long long)qp->q_cnt_4); + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "EQID[%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]", + qp->queue_id, + qp->entry_count, + qp->entry_size, + qp->host_index, + qp->hba_index); + + + /* Reset max counter */ + qp->EQ_max_eqe = 0; + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + if (len >= max_cnt) + goto too_big; +proc_cq: + /* Fast-path FCP CQ */ + qp = phba->sli4_hba.fcp_cq[x]; + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tFCP CQ info: "); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "AssocEQID[%02d]: " + "CQ STAT[max:x%x relw:x%x " + "xabt:x%x wq:x%llx]\n", + qp->assoc_qid, + qp->q_cnt_1, qp->q_cnt_2, + qp->q_cnt_3, (unsigned long long)qp->q_cnt_4); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tCQID[%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]", + qp->queue_id, qp->entry_count, + qp->entry_size, qp->host_index, + qp->hba_index); + + + /* Reset max counter */ + qp->CQ_max_cqe = 0; + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + if (len >= max_cnt) + goto too_big; + + /* Fast-path FCP WQ */ + qp = phba->sli4_hba.fcp_wq[x]; + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tFCP WQ info: "); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "AssocCQID[%02d]: " + "WQ-STAT[oflow:x%x posted:x%llx]\n", + qp->assoc_qid, + qp->q_cnt_1, (unsigned long long)qp->q_cnt_4); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tWQID[%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]", + qp->queue_id, + qp->entry_count, + qp->entry_size, + qp->host_index, + qp->hba_index); + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + if (len >= max_cnt) + goto too_big; + + if (x) + continue; + + /* Only EQ 0 has slow path CQs configured */ + + /* Slow-path mailbox CQ */ + qp = phba->sli4_hba.mbx_cq; + if (qp) { + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tMBX CQ info: "); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "AssocEQID[%02d]: " + "CQ-STAT[mbox:x%x relw:x%x " + "xabt:x%x wq:x%llx]\n", + qp->assoc_qid, + qp->q_cnt_1, qp->q_cnt_2, + qp->q_cnt_3, + (unsigned long long)qp->q_cnt_4); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tCQID[%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]", + qp->queue_id, qp->entry_count, + qp->entry_size, qp->host_index, + qp->hba_index); + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + if (len >= max_cnt) + goto too_big; + } + + /* Slow-path MBOX MQ */ + qp = phba->sli4_hba.mbx_wq; + if (qp) { + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tMBX MQ info: "); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "AssocCQID[%02d]:\n", + phba->sli4_hba.mbx_wq->assoc_qid); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tWQID[%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]", + qp->queue_id, qp->entry_count, + qp->entry_size, qp->host_index, + qp->hba_index); + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + if (len >= max_cnt) + goto too_big; + } + + /* Slow-path ELS response CQ */ + qp = phba->sli4_hba.els_cq; + if (qp) { + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tELS CQ info: "); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "AssocEQID[%02d]: " + "CQ-STAT[max:x%x relw:x%x " + "xabt:x%x wq:x%llx]\n", + qp->assoc_qid, + qp->q_cnt_1, qp->q_cnt_2, + qp->q_cnt_3, + (unsigned long long)qp->q_cnt_4); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tCQID [%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]", + qp->queue_id, qp->entry_count, + qp->entry_size, qp->host_index, + qp->hba_index); + + /* Reset max counter */ + qp->CQ_max_cqe = 0; + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + if (len >= max_cnt) + goto too_big; + } + + /* Slow-path ELS WQ */ + qp = phba->sli4_hba.els_wq; + if (qp) { + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tELS WQ info: "); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "AssocCQID[%02d]: " + " WQ-STAT[oflow:x%x " + "posted:x%llx]\n", + qp->assoc_qid, + qp->q_cnt_1, + (unsigned long long)qp->q_cnt_4); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tWQID[%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]", + qp->queue_id, qp->entry_count, + qp->entry_size, qp->host_index, + qp->hba_index); + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + if (len >= max_cnt) + goto too_big; + } + + if (phba->sli4_hba.hdr_rq && phba->sli4_hba.dat_rq) { + /* Slow-path RQ header */ + qp = phba->sli4_hba.hdr_rq; + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tRQ info: "); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "AssocCQID[%02d]: " + "RQ-STAT[nopost:x%x nobuf:x%x " + "trunc:x%x rcv:x%llx]\n", + qp->assoc_qid, + qp->q_cnt_1, qp->q_cnt_2, + qp->q_cnt_3, + (unsigned long long)qp->q_cnt_4); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tHQID[%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]\n", + qp->queue_id, + qp->entry_count, + qp->entry_size, + qp->host_index, + qp->hba_index); + + /* Slow-path RQ data */ + qp = phba->sli4_hba.dat_rq; + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tDQID[%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]\n", + qp->queue_id, + qp->entry_count, + qp->entry_size, + qp->host_index, + qp->hba_index); + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + } + } + } + + if (phba->cfg_fof) { + /* FOF EQ */ + qp = phba->sli4_hba.fof_eq; + if (!qp) + goto out; + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\nFOF EQ info: " + "EQ-STAT[max:x%x noE:x%x " + "bs:x%x proc:x%llx]\n", + qp->q_cnt_1, qp->q_cnt_2, + qp->q_cnt_3, (unsigned long long)qp->q_cnt_4); + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "EQID[%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]", + qp->queue_id, + qp->entry_count, + qp->entry_size, + qp->host_index, + qp->hba_index); + + /* Reset max counter */ + qp->EQ_max_eqe = 0; + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + if (len >= max_cnt) + goto too_big; + } + + if (phba->cfg_fof) { + + /* OAS CQ */ + qp = phba->sli4_hba.oas_cq; + if (qp) { + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tOAS CQ info: "); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "AssocEQID[%02d]: " + "CQ STAT[max:x%x relw:x%x " + "xabt:x%x wq:x%llx]\n", + qp->assoc_qid, + qp->q_cnt_1, qp->q_cnt_2, + qp->q_cnt_3, (unsigned long long)qp->q_cnt_4); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tCQID[%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]", + qp->queue_id, qp->entry_count, + qp->entry_size, qp->host_index, + qp->hba_index); + + /* Reset max counter */ + qp->CQ_max_cqe = 0; + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + if (len >= max_cnt) + goto too_big; + } + + /* OAS WQ */ + qp = phba->sli4_hba.oas_wq; + if (qp) { + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tOAS WQ info: "); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "AssocCQID[%02d]: " + "WQ-STAT[oflow:x%x posted:x%llx]\n", + qp->assoc_qid, + qp->q_cnt_1, (unsigned long long)qp->q_cnt_4); + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tWQID[%02d], " + "QE-CNT[%04d], QE-SIZE[%04d], " + "HOST-IDX[%04d], PORT-IDX[%04d]", + qp->queue_id, + qp->entry_count, + qp->entry_size, + qp->host_index, + qp->hba_index); + + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + if (len >= max_cnt) + goto too_big; + } + } +out: + spin_unlock_irq(&phba->hbalock); + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); + +too_big: + len += snprintf(pbuffer+len, + LPFC_QUE_INFO_GET_BUF_SIZE-len, "Truncated ...\n"); + spin_unlock_irq(&phba->hbalock); + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + +/** + * lpfc_idiag_que_param_check - queue access command parameter sanity check + * @q: The pointer to queue structure. + * @index: The index into a queue entry. + * @count: The number of queue entries to access. + * + * Description: + * The routine performs sanity check on device queue access method commands. + * + * Returns: + * This function returns -EINVAL when fails the sanity check, otherwise, it + * returns 0. + **/ +static int +lpfc_idiag_que_param_check(struct lpfc_queue *q, int index, int count) +{ + /* Only support single entry read or browsing */ + if ((count != 1) && (count != LPFC_QUE_ACC_BROWSE)) + return -EINVAL; + if (index > q->entry_count - 1) + return -EINVAL; + return 0; +} + +/** + * lpfc_idiag_queacc_read_qe - read a single entry from the given queue index + * @pbuffer: The pointer to buffer to copy the read data into. + * @pque: The pointer to the queue to be read. + * @index: The index into the queue entry. + * + * Description: + * This routine reads out a single entry from the given queue's index location + * and copies it into the buffer provided. + * + * Returns: + * This function returns 0 when it fails, otherwise, it returns the length of + * the data read into the buffer provided. + **/ +static int +lpfc_idiag_queacc_read_qe(char *pbuffer, int len, struct lpfc_queue *pque, + uint32_t index) +{ + int offset, esize; + uint32_t *pentry; + + if (!pbuffer || !pque) + return 0; + + esize = pque->entry_size; + len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len, + "QE-INDEX[%04d]:\n", index); + + offset = 0; + pentry = pque->qe[index].address; + while (esize > 0) { + len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len, + "%08x ", *pentry); + pentry++; + offset += sizeof(uint32_t); + esize -= sizeof(uint32_t); + if (esize > 0 && !(offset % (4 * sizeof(uint32_t)))) + len += snprintf(pbuffer+len, + LPFC_QUE_ACC_BUF_SIZE-len, "\n"); + } + len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len, "\n"); + + return len; +} + +/** + * lpfc_idiag_queacc_read - idiag debugfs read port queue + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the @phba device queue memory according to the + * idiag command, and copies to user @buf. Depending on the queue dump read + * command setup, it does either a single queue entry read or browing through + * all entries of the queue. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_queacc_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + uint32_t last_index, index, count; + struct lpfc_queue *pque = NULL; + char *pbuffer; + int len = 0; + + /* This is a user read operation */ + debug->op = LPFC_IDIAG_OP_RD; + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_QUE_ACC_BUF_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + + if (*ppos) + return 0; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) { + index = idiag.cmd.data[IDIAG_QUEACC_INDEX_INDX]; + count = idiag.cmd.data[IDIAG_QUEACC_COUNT_INDX]; + pque = (struct lpfc_queue *)idiag.ptr_private; + } else + return 0; + + /* Browse the queue starting from index */ + if (count == LPFC_QUE_ACC_BROWSE) + goto que_browse; + + /* Read a single entry from the queue */ + len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index); + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); + +que_browse: + + /* Browse all entries from the queue */ + last_index = idiag.offset.last_rd; + index = last_index; + + while (len < LPFC_QUE_ACC_SIZE - pque->entry_size) { + len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index); + index++; + if (index > pque->entry_count - 1) + break; + } + + /* Set up the offset for next portion of pci cfg read */ + if (index > pque->entry_count - 1) + index = 0; + idiag.offset.last_rd = index; + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + +/** + * lpfc_idiag_queacc_write - Syntax check and set up idiag queacc commands + * @file: The file pointer to read from. + * @buf: The buffer to copy the user data from. + * @nbytes: The number of bytes to get. + * @ppos: The position in the file to start reading from. + * + * This routine get the debugfs idiag command struct from user space and then + * perform the syntax check for port queue read (dump) or write (set) command + * accordingly. In the case of port queue read command, it sets up the command + * in the idiag command struct for the following debugfs read operation. In + * the case of port queue write operation, it executes the write operation + * into the port queue entry accordingly. + * + * It returns the @nbytges passing in from debugfs user space when successful. + * In case of error conditions, it returns proper error code back to the user + * space. + **/ +static ssize_t +lpfc_idiag_queacc_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + uint32_t qidx, quetp, queid, index, count, offset, value; + uint32_t *pentry; + struct lpfc_queue *pque; + int rc; + + /* This is a user write operation */ + debug->op = LPFC_IDIAG_OP_WR; + + rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); + if (rc < 0) + return rc; + + /* Get and sanity check on command feilds */ + quetp = idiag.cmd.data[IDIAG_QUEACC_QUETP_INDX]; + queid = idiag.cmd.data[IDIAG_QUEACC_QUEID_INDX]; + index = idiag.cmd.data[IDIAG_QUEACC_INDEX_INDX]; + count = idiag.cmd.data[IDIAG_QUEACC_COUNT_INDX]; + offset = idiag.cmd.data[IDIAG_QUEACC_OFFST_INDX]; + value = idiag.cmd.data[IDIAG_QUEACC_VALUE_INDX]; + + /* Sanity check on command line arguments */ + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) { + if (rc != LPFC_QUE_ACC_WR_CMD_ARG) + goto error_out; + if (count != 1) + goto error_out; + } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) { + if (rc != LPFC_QUE_ACC_RD_CMD_ARG) + goto error_out; + } else + goto error_out; + + switch (quetp) { + case LPFC_IDIAG_EQ: + /* HBA event queue */ + if (phba->sli4_hba.hba_eq) { + for (qidx = 0; qidx < phba->cfg_fcp_io_channel; + qidx++) { + if (phba->sli4_hba.hba_eq[qidx] && + phba->sli4_hba.hba_eq[qidx]->queue_id == + queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.hba_eq[qidx], + index, count); + if (rc) + goto error_out; + idiag.ptr_private = + phba->sli4_hba.hba_eq[qidx]; + goto pass_check; + } + } + } + goto error_out; + break; + case LPFC_IDIAG_CQ: + /* MBX complete queue */ + if (phba->sli4_hba.mbx_cq && + phba->sli4_hba.mbx_cq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.mbx_cq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.mbx_cq; + goto pass_check; + } + /* ELS complete queue */ + if (phba->sli4_hba.els_cq && + phba->sli4_hba.els_cq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.els_cq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.els_cq; + goto pass_check; + } + /* FCP complete queue */ + if (phba->sli4_hba.fcp_cq) { + qidx = 0; + do { + if (phba->sli4_hba.fcp_cq[qidx] && + phba->sli4_hba.fcp_cq[qidx]->queue_id == + queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.fcp_cq[qidx], + index, count); + if (rc) + goto error_out; + idiag.ptr_private = + phba->sli4_hba.fcp_cq[qidx]; + goto pass_check; + } + } while (++qidx < phba->cfg_fcp_io_channel); + } + goto error_out; + break; + case LPFC_IDIAG_MQ: + /* MBX work queue */ + if (phba->sli4_hba.mbx_wq && + phba->sli4_hba.mbx_wq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.mbx_wq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.mbx_wq; + goto pass_check; + } + goto error_out; + break; + case LPFC_IDIAG_WQ: + /* ELS work queue */ + if (phba->sli4_hba.els_wq && + phba->sli4_hba.els_wq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.els_wq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.els_wq; + goto pass_check; + } + /* FCP work queue */ + if (phba->sli4_hba.fcp_wq) { + for (qidx = 0; qidx < phba->cfg_fcp_io_channel; + qidx++) { + if (!phba->sli4_hba.fcp_wq[qidx]) + continue; + if (phba->sli4_hba.fcp_wq[qidx]->queue_id == + queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.fcp_wq[qidx], + index, count); + if (rc) + goto error_out; + idiag.ptr_private = + phba->sli4_hba.fcp_wq[qidx]; + goto pass_check; + } + } + } + goto error_out; + break; + case LPFC_IDIAG_RQ: + /* HDR queue */ + if (phba->sli4_hba.hdr_rq && + phba->sli4_hba.hdr_rq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.hdr_rq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.hdr_rq; + goto pass_check; + } + /* DAT queue */ + if (phba->sli4_hba.dat_rq && + phba->sli4_hba.dat_rq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.dat_rq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.dat_rq; + goto pass_check; + } + goto error_out; + break; + default: + goto error_out; + break; + } + +pass_check: + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) { + if (count == LPFC_QUE_ACC_BROWSE) + idiag.offset.last_rd = index; + } + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) { + /* Additional sanity checks on write operation */ + pque = (struct lpfc_queue *)idiag.ptr_private; + if (offset > pque->entry_size/sizeof(uint32_t) - 1) + goto error_out; + pentry = pque->qe[index].address; + pentry += offset; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR) + *pentry = value; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST) + *pentry |= value; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) + *pentry &= ~value; + } + return nbytes; + +error_out: + /* Clean out command structure on command error out */ + memset(&idiag, 0, sizeof(idiag)); + return -EINVAL; +} + +/** + * lpfc_idiag_drbacc_read_reg - idiag debugfs read a doorbell register + * @phba: The pointer to hba structure. + * @pbuffer: The pointer to the buffer to copy the data to. + * @len: The lenght of bytes to copied. + * @drbregid: The id to doorbell registers. + * + * Description: + * This routine reads a doorbell register and copies its content to the + * user buffer pointed to by @pbuffer. + * + * Returns: + * This function returns the amount of data that was copied into @pbuffer. + **/ +static int +lpfc_idiag_drbacc_read_reg(struct lpfc_hba *phba, char *pbuffer, + int len, uint32_t drbregid) +{ + + if (!pbuffer) + return 0; + + switch (drbregid) { + case LPFC_DRB_EQCQ: + len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len, + "EQCQ-DRB-REG: 0x%08x\n", + readl(phba->sli4_hba.EQCQDBregaddr)); + break; + case LPFC_DRB_MQ: + len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len, + "MQ-DRB-REG: 0x%08x\n", + readl(phba->sli4_hba.MQDBregaddr)); + break; + case LPFC_DRB_WQ: + len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len, + "WQ-DRB-REG: 0x%08x\n", + readl(phba->sli4_hba.WQDBregaddr)); + break; + case LPFC_DRB_RQ: + len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len, + "RQ-DRB-REG: 0x%08x\n", + readl(phba->sli4_hba.RQDBregaddr)); + break; + default: + break; + } + + return len; +} + +/** + * lpfc_idiag_drbacc_read - idiag debugfs read port doorbell + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the @phba device doorbell register according + * to the idiag command, and copies to user @buf. Depending on the doorbell + * register read command setup, it does either a single doorbell register + * read or dump all doorbell registers. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_drbacc_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + uint32_t drb_reg_id, i; + char *pbuffer; + int len = 0; + + /* This is a user read operation */ + debug->op = LPFC_IDIAG_OP_RD; + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_DRB_ACC_BUF_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + + if (*ppos) + return 0; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD) + drb_reg_id = idiag.cmd.data[IDIAG_DRBACC_REGID_INDX]; + else + return 0; + + if (drb_reg_id == LPFC_DRB_ACC_ALL) + for (i = 1; i <= LPFC_DRB_MAX; i++) + len = lpfc_idiag_drbacc_read_reg(phba, + pbuffer, len, i); + else + len = lpfc_idiag_drbacc_read_reg(phba, + pbuffer, len, drb_reg_id); + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + +/** + * lpfc_idiag_drbacc_write - Syntax check and set up idiag drbacc commands + * @file: The file pointer to read from. + * @buf: The buffer to copy the user data from. + * @nbytes: The number of bytes to get. + * @ppos: The position in the file to start reading from. + * + * This routine get the debugfs idiag command struct from user space and then + * perform the syntax check for port doorbell register read (dump) or write + * (set) command accordingly. In the case of port queue read command, it sets + * up the command in the idiag command struct for the following debugfs read + * operation. In the case of port doorbell register write operation, it + * executes the write operation into the port doorbell register accordingly. + * + * It returns the @nbytges passing in from debugfs user space when successful. + * In case of error conditions, it returns proper error code back to the user + * space. + **/ +static ssize_t +lpfc_idiag_drbacc_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + uint32_t drb_reg_id, value, reg_val = 0; + void __iomem *drb_reg; + int rc; + + /* This is a user write operation */ + debug->op = LPFC_IDIAG_OP_WR; + + rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); + if (rc < 0) + return rc; + + /* Sanity check on command line arguments */ + drb_reg_id = idiag.cmd.data[IDIAG_DRBACC_REGID_INDX]; + value = idiag.cmd.data[IDIAG_DRBACC_VALUE_INDX]; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) { + if (rc != LPFC_DRB_ACC_WR_CMD_ARG) + goto error_out; + if (drb_reg_id > LPFC_DRB_MAX) + goto error_out; + } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD) { + if (rc != LPFC_DRB_ACC_RD_CMD_ARG) + goto error_out; + if ((drb_reg_id > LPFC_DRB_MAX) && + (drb_reg_id != LPFC_DRB_ACC_ALL)) + goto error_out; + } else + goto error_out; + + /* Perform the write access operation */ + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) { + switch (drb_reg_id) { + case LPFC_DRB_EQCQ: + drb_reg = phba->sli4_hba.EQCQDBregaddr; + break; + case LPFC_DRB_MQ: + drb_reg = phba->sli4_hba.MQDBregaddr; + break; + case LPFC_DRB_WQ: + drb_reg = phba->sli4_hba.WQDBregaddr; + break; + case LPFC_DRB_RQ: + drb_reg = phba->sli4_hba.RQDBregaddr; + break; + default: + goto error_out; + } + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR) + reg_val = value; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST) { + reg_val = readl(drb_reg); + reg_val |= value; + } + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) { + reg_val = readl(drb_reg); + reg_val &= ~value; + } + writel(reg_val, drb_reg); + readl(drb_reg); /* flush */ + } + return nbytes; + +error_out: + /* Clean out command structure on command error out */ + memset(&idiag, 0, sizeof(idiag)); + return -EINVAL; +} + +/** + * lpfc_idiag_ctlacc_read_reg - idiag debugfs read a control registers + * @phba: The pointer to hba structure. + * @pbuffer: The pointer to the buffer to copy the data to. + * @len: The lenght of bytes to copied. + * @drbregid: The id to doorbell registers. + * + * Description: + * This routine reads a control register and copies its content to the + * user buffer pointed to by @pbuffer. + * + * Returns: + * This function returns the amount of data that was copied into @pbuffer. + **/ +static int +lpfc_idiag_ctlacc_read_reg(struct lpfc_hba *phba, char *pbuffer, + int len, uint32_t ctlregid) +{ + + if (!pbuffer) + return 0; + + switch (ctlregid) { + case LPFC_CTL_PORT_SEM: + len += snprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len, + "Port SemReg: 0x%08x\n", + readl(phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PORT_SEM_OFFSET)); + break; + case LPFC_CTL_PORT_STA: + len += snprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len, + "Port StaReg: 0x%08x\n", + readl(phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PORT_STA_OFFSET)); + break; + case LPFC_CTL_PORT_CTL: + len += snprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len, + "Port CtlReg: 0x%08x\n", + readl(phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PORT_CTL_OFFSET)); + break; + case LPFC_CTL_PORT_ER1: + len += snprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len, + "Port Er1Reg: 0x%08x\n", + readl(phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PORT_ER1_OFFSET)); + break; + case LPFC_CTL_PORT_ER2: + len += snprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len, + "Port Er2Reg: 0x%08x\n", + readl(phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PORT_ER2_OFFSET)); + break; + case LPFC_CTL_PDEV_CTL: + len += snprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len, + "PDev CtlReg: 0x%08x\n", + readl(phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PDEV_CTL_OFFSET)); + break; + default: + break; + } + return len; +} + +/** + * lpfc_idiag_ctlacc_read - idiag debugfs read port and device control register + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the @phba port and device registers according + * to the idiag command, and copies to user @buf. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_ctlacc_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + uint32_t ctl_reg_id, i; + char *pbuffer; + int len = 0; + + /* This is a user read operation */ + debug->op = LPFC_IDIAG_OP_RD; + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_CTL_ACC_BUF_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + + if (*ppos) + return 0; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_RD) + ctl_reg_id = idiag.cmd.data[IDIAG_CTLACC_REGID_INDX]; + else + return 0; + + if (ctl_reg_id == LPFC_CTL_ACC_ALL) + for (i = 1; i <= LPFC_CTL_MAX; i++) + len = lpfc_idiag_ctlacc_read_reg(phba, + pbuffer, len, i); + else + len = lpfc_idiag_ctlacc_read_reg(phba, + pbuffer, len, ctl_reg_id); + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + +/** + * lpfc_idiag_ctlacc_write - Syntax check and set up idiag ctlacc commands + * @file: The file pointer to read from. + * @buf: The buffer to copy the user data from. + * @nbytes: The number of bytes to get. + * @ppos: The position in the file to start reading from. + * + * This routine get the debugfs idiag command struct from user space and then + * perform the syntax check for port and device control register read (dump) + * or write (set) command accordingly. + * + * It returns the @nbytges passing in from debugfs user space when successful. + * In case of error conditions, it returns proper error code back to the user + * space. + **/ +static ssize_t +lpfc_idiag_ctlacc_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + uint32_t ctl_reg_id, value, reg_val = 0; + void __iomem *ctl_reg; + int rc; + + /* This is a user write operation */ + debug->op = LPFC_IDIAG_OP_WR; + + rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); + if (rc < 0) + return rc; + + /* Sanity check on command line arguments */ + ctl_reg_id = idiag.cmd.data[IDIAG_CTLACC_REGID_INDX]; + value = idiag.cmd.data[IDIAG_CTLACC_VALUE_INDX]; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_CL) { + if (rc != LPFC_CTL_ACC_WR_CMD_ARG) + goto error_out; + if (ctl_reg_id > LPFC_CTL_MAX) + goto error_out; + } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_RD) { + if (rc != LPFC_CTL_ACC_RD_CMD_ARG) + goto error_out; + if ((ctl_reg_id > LPFC_CTL_MAX) && + (ctl_reg_id != LPFC_CTL_ACC_ALL)) + goto error_out; + } else + goto error_out; + + /* Perform the write access operation */ + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_CL) { + switch (ctl_reg_id) { + case LPFC_CTL_PORT_SEM: + ctl_reg = phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PORT_SEM_OFFSET; + break; + case LPFC_CTL_PORT_STA: + ctl_reg = phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PORT_STA_OFFSET; + break; + case LPFC_CTL_PORT_CTL: + ctl_reg = phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PORT_CTL_OFFSET; + break; + case LPFC_CTL_PORT_ER1: + ctl_reg = phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PORT_ER1_OFFSET; + break; + case LPFC_CTL_PORT_ER2: + ctl_reg = phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PORT_ER2_OFFSET; + break; + case LPFC_CTL_PDEV_CTL: + ctl_reg = phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PDEV_CTL_OFFSET; + break; + default: + goto error_out; + } + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_WR) + reg_val = value; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_ST) { + reg_val = readl(ctl_reg); + reg_val |= value; + } + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_CL) { + reg_val = readl(ctl_reg); + reg_val &= ~value; + } + writel(reg_val, ctl_reg); + readl(ctl_reg); /* flush */ + } + return nbytes; + +error_out: + /* Clean out command structure on command error out */ + memset(&idiag, 0, sizeof(idiag)); + return -EINVAL; +} + +/** + * lpfc_idiag_mbxacc_get_setup - idiag debugfs get mailbox access setup + * @phba: Pointer to HBA context object. + * @pbuffer: Pointer to data buffer. + * + * Description: + * This routine gets the driver mailbox access debugfs setup information. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static int +lpfc_idiag_mbxacc_get_setup(struct lpfc_hba *phba, char *pbuffer) +{ + uint32_t mbx_dump_map, mbx_dump_cnt, mbx_word_cnt, mbx_mbox_cmd; + int len = 0; + + mbx_mbox_cmd = idiag.cmd.data[IDIAG_MBXACC_MBCMD_INDX]; + mbx_dump_map = idiag.cmd.data[IDIAG_MBXACC_DPMAP_INDX]; + mbx_dump_cnt = idiag.cmd.data[IDIAG_MBXACC_DPCNT_INDX]; + mbx_word_cnt = idiag.cmd.data[IDIAG_MBXACC_WDCNT_INDX]; + + len += snprintf(pbuffer+len, LPFC_MBX_ACC_BUF_SIZE-len, + "mbx_dump_map: 0x%08x\n", mbx_dump_map); + len += snprintf(pbuffer+len, LPFC_MBX_ACC_BUF_SIZE-len, + "mbx_dump_cnt: %04d\n", mbx_dump_cnt); + len += snprintf(pbuffer+len, LPFC_MBX_ACC_BUF_SIZE-len, + "mbx_word_cnt: %04d\n", mbx_word_cnt); + len += snprintf(pbuffer+len, LPFC_MBX_ACC_BUF_SIZE-len, + "mbx_mbox_cmd: 0x%02x\n", mbx_mbox_cmd); + + return len; +} + +/** + * lpfc_idiag_mbxacc_read - idiag debugfs read on mailbox access + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the @phba driver mailbox access debugfs setup + * information. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_mbxacc_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + char *pbuffer; + int len = 0; + + /* This is a user read operation */ + debug->op = LPFC_IDIAG_OP_RD; + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_MBX_ACC_BUF_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + + if (*ppos) + return 0; + + if ((idiag.cmd.opcode != LPFC_IDIAG_CMD_MBXACC_DP) && + (idiag.cmd.opcode != LPFC_IDIAG_BSG_MBXACC_DP)) + return 0; + + len = lpfc_idiag_mbxacc_get_setup(phba, pbuffer); + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + +/** + * lpfc_idiag_mbxacc_write - Syntax check and set up idiag mbxacc commands + * @file: The file pointer to read from. + * @buf: The buffer to copy the user data from. + * @nbytes: The number of bytes to get. + * @ppos: The position in the file to start reading from. + * + * This routine get the debugfs idiag command struct from user space and then + * perform the syntax check for driver mailbox command (dump) and sets up the + * necessary states in the idiag command struct accordingly. + * + * It returns the @nbytges passing in from debugfs user space when successful. + * In case of error conditions, it returns proper error code back to the user + * space. + **/ +static ssize_t +lpfc_idiag_mbxacc_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + uint32_t mbx_dump_map, mbx_dump_cnt, mbx_word_cnt, mbx_mbox_cmd; + int rc; + + /* This is a user write operation */ + debug->op = LPFC_IDIAG_OP_WR; + + rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); + if (rc < 0) + return rc; + + /* Sanity check on command line arguments */ + mbx_mbox_cmd = idiag.cmd.data[IDIAG_MBXACC_MBCMD_INDX]; + mbx_dump_map = idiag.cmd.data[IDIAG_MBXACC_DPMAP_INDX]; + mbx_dump_cnt = idiag.cmd.data[IDIAG_MBXACC_DPCNT_INDX]; + mbx_word_cnt = idiag.cmd.data[IDIAG_MBXACC_WDCNT_INDX]; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_MBXACC_DP) { + if (!(mbx_dump_map & LPFC_MBX_DMP_MBX_ALL)) + goto error_out; + if ((mbx_dump_map & ~LPFC_MBX_DMP_MBX_ALL) && + (mbx_dump_map != LPFC_MBX_DMP_ALL)) + goto error_out; + if (mbx_word_cnt > sizeof(MAILBOX_t)) + goto error_out; + } else if (idiag.cmd.opcode == LPFC_IDIAG_BSG_MBXACC_DP) { + if (!(mbx_dump_map & LPFC_BSG_DMP_MBX_ALL)) + goto error_out; + if ((mbx_dump_map & ~LPFC_BSG_DMP_MBX_ALL) && + (mbx_dump_map != LPFC_MBX_DMP_ALL)) + goto error_out; + if (mbx_word_cnt > (BSG_MBOX_SIZE)/4) + goto error_out; + if (mbx_mbox_cmd != 0x9b) + goto error_out; + } else + goto error_out; + + if (mbx_word_cnt == 0) + goto error_out; + if (rc != LPFC_MBX_DMP_ARG) + goto error_out; + if (mbx_mbox_cmd & ~0xff) + goto error_out; + + /* condition for stop mailbox dump */ + if (mbx_dump_cnt == 0) + goto reset_out; + + return nbytes; + +reset_out: + /* Clean out command structure on command error out */ + memset(&idiag, 0, sizeof(idiag)); + return nbytes; + +error_out: + /* Clean out command structure on command error out */ + memset(&idiag, 0, sizeof(idiag)); + return -EINVAL; +} + +/** + * lpfc_idiag_extacc_avail_get - get the available extents information + * @phba: pointer to lpfc hba data structure. + * @pbuffer: pointer to internal buffer. + * @len: length into the internal buffer data has been copied. + * + * Description: + * This routine is to get the available extent information. + * + * Returns: + * overall lenth of the data read into the internal buffer. + **/ +static int +lpfc_idiag_extacc_avail_get(struct lpfc_hba *phba, char *pbuffer, int len) +{ + uint16_t ext_cnt, ext_size; + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\nAvailable Extents Information:\n"); + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tPort Available VPI extents: "); + lpfc_sli4_get_avail_extnt_rsrc(phba, LPFC_RSC_TYPE_FCOE_VPI, + &ext_cnt, &ext_size); + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "Count %3d, Size %3d\n", ext_cnt, ext_size); + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tPort Available VFI extents: "); + lpfc_sli4_get_avail_extnt_rsrc(phba, LPFC_RSC_TYPE_FCOE_VFI, + &ext_cnt, &ext_size); + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "Count %3d, Size %3d\n", ext_cnt, ext_size); + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tPort Available RPI extents: "); + lpfc_sli4_get_avail_extnt_rsrc(phba, LPFC_RSC_TYPE_FCOE_RPI, + &ext_cnt, &ext_size); + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "Count %3d, Size %3d\n", ext_cnt, ext_size); + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tPort Available XRI extents: "); + lpfc_sli4_get_avail_extnt_rsrc(phba, LPFC_RSC_TYPE_FCOE_XRI, + &ext_cnt, &ext_size); + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "Count %3d, Size %3d\n", ext_cnt, ext_size); + + return len; +} + +/** + * lpfc_idiag_extacc_alloc_get - get the allocated extents information + * @phba: pointer to lpfc hba data structure. + * @pbuffer: pointer to internal buffer. + * @len: length into the internal buffer data has been copied. + * + * Description: + * This routine is to get the allocated extent information. + * + * Returns: + * overall lenth of the data read into the internal buffer. + **/ +static int +lpfc_idiag_extacc_alloc_get(struct lpfc_hba *phba, char *pbuffer, int len) +{ + uint16_t ext_cnt, ext_size; + int rc; + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\nAllocated Extents Information:\n"); + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tHost Allocated VPI extents: "); + rc = lpfc_sli4_get_allocated_extnts(phba, LPFC_RSC_TYPE_FCOE_VPI, + &ext_cnt, &ext_size); + if (!rc) + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "Port %d Extent %3d, Size %3d\n", + phba->brd_no, ext_cnt, ext_size); + else + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "N/A\n"); + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tHost Allocated VFI extents: "); + rc = lpfc_sli4_get_allocated_extnts(phba, LPFC_RSC_TYPE_FCOE_VFI, + &ext_cnt, &ext_size); + if (!rc) + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "Port %d Extent %3d, Size %3d\n", + phba->brd_no, ext_cnt, ext_size); + else + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "N/A\n"); + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tHost Allocated RPI extents: "); + rc = lpfc_sli4_get_allocated_extnts(phba, LPFC_RSC_TYPE_FCOE_RPI, + &ext_cnt, &ext_size); + if (!rc) + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "Port %d Extent %3d, Size %3d\n", + phba->brd_no, ext_cnt, ext_size); + else + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "N/A\n"); + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tHost Allocated XRI extents: "); + rc = lpfc_sli4_get_allocated_extnts(phba, LPFC_RSC_TYPE_FCOE_XRI, + &ext_cnt, &ext_size); + if (!rc) + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "Port %d Extent %3d, Size %3d\n", + phba->brd_no, ext_cnt, ext_size); + else + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "N/A\n"); + + return len; +} + +/** + * lpfc_idiag_extacc_drivr_get - get driver extent information + * @phba: pointer to lpfc hba data structure. + * @pbuffer: pointer to internal buffer. + * @len: length into the internal buffer data has been copied. + * + * Description: + * This routine is to get the driver extent information. + * + * Returns: + * overall lenth of the data read into the internal buffer. + **/ +static int +lpfc_idiag_extacc_drivr_get(struct lpfc_hba *phba, char *pbuffer, int len) +{ + struct lpfc_rsrc_blks *rsrc_blks; + int index; + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\nDriver Extents Information:\n"); + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tVPI extents:\n"); + index = 0; + list_for_each_entry(rsrc_blks, &phba->lpfc_vpi_blk_list, list) { + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\t\tBlock %3d: Start %4d, Count %4d\n", + index, rsrc_blks->rsrc_start, + rsrc_blks->rsrc_size); + index++; + } + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tVFI extents:\n"); + index = 0; + list_for_each_entry(rsrc_blks, &phba->sli4_hba.lpfc_vfi_blk_list, + list) { + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\t\tBlock %3d: Start %4d, Count %4d\n", + index, rsrc_blks->rsrc_start, + rsrc_blks->rsrc_size); + index++; + } + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tRPI extents:\n"); + index = 0; + list_for_each_entry(rsrc_blks, &phba->sli4_hba.lpfc_rpi_blk_list, + list) { + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\t\tBlock %3d: Start %4d, Count %4d\n", + index, rsrc_blks->rsrc_start, + rsrc_blks->rsrc_size); + index++; + } + + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\tXRI extents:\n"); + index = 0; + list_for_each_entry(rsrc_blks, &phba->sli4_hba.lpfc_xri_blk_list, + list) { + len += snprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len, + "\t\tBlock %3d: Start %4d, Count %4d\n", + index, rsrc_blks->rsrc_start, + rsrc_blks->rsrc_size); + index++; + } + + return len; +} + +/** + * lpfc_idiag_extacc_write - Syntax check and set up idiag extacc commands + * @file: The file pointer to read from. + * @buf: The buffer to copy the user data from. + * @nbytes: The number of bytes to get. + * @ppos: The position in the file to start reading from. + * + * This routine get the debugfs idiag command struct from user space and then + * perform the syntax check for extent information access commands and sets + * up the necessary states in the idiag command struct accordingly. + * + * It returns the @nbytges passing in from debugfs user space when successful. + * In case of error conditions, it returns proper error code back to the user + * space. + **/ +static ssize_t +lpfc_idiag_extacc_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + uint32_t ext_map; + int rc; + + /* This is a user write operation */ + debug->op = LPFC_IDIAG_OP_WR; + + rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); + if (rc < 0) + return rc; + + ext_map = idiag.cmd.data[IDIAG_EXTACC_EXMAP_INDX]; + + if (idiag.cmd.opcode != LPFC_IDIAG_CMD_EXTACC_RD) + goto error_out; + if (rc != LPFC_EXT_ACC_CMD_ARG) + goto error_out; + if (!(ext_map & LPFC_EXT_ACC_ALL)) + goto error_out; + + return nbytes; +error_out: + /* Clean out command structure on command error out */ + memset(&idiag, 0, sizeof(idiag)); + return -EINVAL; +} + +/** + * lpfc_idiag_extacc_read - idiag debugfs read access to extent information + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the proper extent information according to + * the idiag command, and copies to user @buf. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_extacc_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + char *pbuffer; + uint32_t ext_map; + int len = 0; + + /* This is a user read operation */ + debug->op = LPFC_IDIAG_OP_RD; + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_EXT_ACC_BUF_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + if (*ppos) + return 0; + if (idiag.cmd.opcode != LPFC_IDIAG_CMD_EXTACC_RD) + return 0; + + ext_map = idiag.cmd.data[IDIAG_EXTACC_EXMAP_INDX]; + if (ext_map & LPFC_EXT_ACC_AVAIL) + len = lpfc_idiag_extacc_avail_get(phba, pbuffer, len); + if (ext_map & LPFC_EXT_ACC_ALLOC) + len = lpfc_idiag_extacc_alloc_get(phba, pbuffer, len); + if (ext_map & LPFC_EXT_ACC_DRIVR) + len = lpfc_idiag_extacc_drivr_get(phba, pbuffer, len); + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + +#undef lpfc_debugfs_op_disc_trc +static const struct file_operations lpfc_debugfs_op_disc_trc = { + .owner = THIS_MODULE, + .open = lpfc_debugfs_disc_trc_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_debugfs_read, + .release = lpfc_debugfs_release, +}; + +#undef lpfc_debugfs_op_nodelist +static const struct file_operations lpfc_debugfs_op_nodelist = { + .owner = THIS_MODULE, + .open = lpfc_debugfs_nodelist_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_debugfs_read, + .release = lpfc_debugfs_release, +}; + +#undef lpfc_debugfs_op_hbqinfo +static const struct file_operations lpfc_debugfs_op_hbqinfo = { + .owner = THIS_MODULE, + .open = lpfc_debugfs_hbqinfo_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_debugfs_read, + .release = lpfc_debugfs_release, +}; + +#undef lpfc_debugfs_op_dumpHBASlim +static const struct file_operations lpfc_debugfs_op_dumpHBASlim = { + .owner = THIS_MODULE, + .open = lpfc_debugfs_dumpHBASlim_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_debugfs_read, + .release = lpfc_debugfs_release, +}; + +#undef lpfc_debugfs_op_dumpHostSlim +static const struct file_operations lpfc_debugfs_op_dumpHostSlim = { + .owner = THIS_MODULE, + .open = lpfc_debugfs_dumpHostSlim_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_debugfs_read, + .release = lpfc_debugfs_release, +}; + +#undef lpfc_debugfs_op_dumpData +static const struct file_operations lpfc_debugfs_op_dumpData = { + .owner = THIS_MODULE, + .open = lpfc_debugfs_dumpData_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_debugfs_read, + .write = lpfc_debugfs_dumpDataDif_write, + .release = lpfc_debugfs_dumpDataDif_release, +}; + +#undef lpfc_debugfs_op_dumpDif +static const struct file_operations lpfc_debugfs_op_dumpDif = { + .owner = THIS_MODULE, + .open = lpfc_debugfs_dumpDif_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_debugfs_read, + .write = lpfc_debugfs_dumpDataDif_write, + .release = lpfc_debugfs_dumpDataDif_release, +}; + +#undef lpfc_debugfs_op_dif_err +static const struct file_operations lpfc_debugfs_op_dif_err = { + .owner = THIS_MODULE, + .open = simple_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_debugfs_dif_err_read, + .write = lpfc_debugfs_dif_err_write, + .release = lpfc_debugfs_dif_err_release, +}; + +#undef lpfc_debugfs_op_slow_ring_trc +static const struct file_operations lpfc_debugfs_op_slow_ring_trc = { + .owner = THIS_MODULE, + .open = lpfc_debugfs_slow_ring_trc_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_debugfs_read, + .release = lpfc_debugfs_release, +}; + +static struct dentry *lpfc_debugfs_root = NULL; +static atomic_t lpfc_debugfs_hba_count; + +/* + * File operations for the iDiag debugfs + */ +#undef lpfc_idiag_op_pciCfg +static const struct file_operations lpfc_idiag_op_pciCfg = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_idiag_pcicfg_read, + .write = lpfc_idiag_pcicfg_write, + .release = lpfc_idiag_cmd_release, +}; + +#undef lpfc_idiag_op_barAcc +static const struct file_operations lpfc_idiag_op_barAcc = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_idiag_baracc_read, + .write = lpfc_idiag_baracc_write, + .release = lpfc_idiag_cmd_release, +}; + +#undef lpfc_idiag_op_queInfo +static const struct file_operations lpfc_idiag_op_queInfo = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .read = lpfc_idiag_queinfo_read, + .release = lpfc_idiag_release, +}; + +#undef lpfc_idiag_op_queAcc +static const struct file_operations lpfc_idiag_op_queAcc = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_idiag_queacc_read, + .write = lpfc_idiag_queacc_write, + .release = lpfc_idiag_cmd_release, +}; + +#undef lpfc_idiag_op_drbAcc +static const struct file_operations lpfc_idiag_op_drbAcc = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_idiag_drbacc_read, + .write = lpfc_idiag_drbacc_write, + .release = lpfc_idiag_cmd_release, +}; + +#undef lpfc_idiag_op_ctlAcc +static const struct file_operations lpfc_idiag_op_ctlAcc = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_idiag_ctlacc_read, + .write = lpfc_idiag_ctlacc_write, + .release = lpfc_idiag_cmd_release, +}; + +#undef lpfc_idiag_op_mbxAcc +static const struct file_operations lpfc_idiag_op_mbxAcc = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_idiag_mbxacc_read, + .write = lpfc_idiag_mbxacc_write, + .release = lpfc_idiag_cmd_release, +}; + +#undef lpfc_idiag_op_extAcc +static const struct file_operations lpfc_idiag_op_extAcc = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_idiag_extacc_read, + .write = lpfc_idiag_extacc_write, + .release = lpfc_idiag_cmd_release, +}; + +#endif + +/* lpfc_idiag_mbxacc_dump_bsg_mbox - idiag debugfs dump bsg mailbox command + * @phba: Pointer to HBA context object. + * @dmabuf: Pointer to a DMA buffer descriptor. + * + * Description: + * This routine dump a bsg pass-through non-embedded mailbox command with + * external buffer. + **/ +void +lpfc_idiag_mbxacc_dump_bsg_mbox(struct lpfc_hba *phba, enum nemb_type nemb_tp, + enum mbox_type mbox_tp, enum dma_type dma_tp, + enum sta_type sta_tp, + struct lpfc_dmabuf *dmabuf, uint32_t ext_buf) +{ +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + uint32_t *mbx_mbox_cmd, *mbx_dump_map, *mbx_dump_cnt, *mbx_word_cnt; + char line_buf[LPFC_MBX_ACC_LBUF_SZ]; + int len = 0; + uint32_t do_dump = 0; + uint32_t *pword; + uint32_t i; + + if (idiag.cmd.opcode != LPFC_IDIAG_BSG_MBXACC_DP) + return; + + mbx_mbox_cmd = &idiag.cmd.data[IDIAG_MBXACC_MBCMD_INDX]; + mbx_dump_map = &idiag.cmd.data[IDIAG_MBXACC_DPMAP_INDX]; + mbx_dump_cnt = &idiag.cmd.data[IDIAG_MBXACC_DPCNT_INDX]; + mbx_word_cnt = &idiag.cmd.data[IDIAG_MBXACC_WDCNT_INDX]; + + if (!(*mbx_dump_map & LPFC_MBX_DMP_ALL) || + (*mbx_dump_cnt == 0) || + (*mbx_word_cnt == 0)) + return; + + if (*mbx_mbox_cmd != 0x9B) + return; + + if ((mbox_tp == mbox_rd) && (dma_tp == dma_mbox)) { + if (*mbx_dump_map & LPFC_BSG_DMP_MBX_RD_MBX) { + do_dump |= LPFC_BSG_DMP_MBX_RD_MBX; + printk(KERN_ERR "\nRead mbox command (x%x), " + "nemb:0x%x, extbuf_cnt:%d:\n", + sta_tp, nemb_tp, ext_buf); + } + } + if ((mbox_tp == mbox_rd) && (dma_tp == dma_ebuf)) { + if (*mbx_dump_map & LPFC_BSG_DMP_MBX_RD_BUF) { + do_dump |= LPFC_BSG_DMP_MBX_RD_BUF; + printk(KERN_ERR "\nRead mbox buffer (x%x), " + "nemb:0x%x, extbuf_seq:%d:\n", + sta_tp, nemb_tp, ext_buf); + } + } + if ((mbox_tp == mbox_wr) && (dma_tp == dma_mbox)) { + if (*mbx_dump_map & LPFC_BSG_DMP_MBX_WR_MBX) { + do_dump |= LPFC_BSG_DMP_MBX_WR_MBX; + printk(KERN_ERR "\nWrite mbox command (x%x), " + "nemb:0x%x, extbuf_cnt:%d:\n", + sta_tp, nemb_tp, ext_buf); + } + } + if ((mbox_tp == mbox_wr) && (dma_tp == dma_ebuf)) { + if (*mbx_dump_map & LPFC_BSG_DMP_MBX_WR_BUF) { + do_dump |= LPFC_BSG_DMP_MBX_WR_BUF; + printk(KERN_ERR "\nWrite mbox buffer (x%x), " + "nemb:0x%x, extbuf_seq:%d:\n", + sta_tp, nemb_tp, ext_buf); + } + } + + /* dump buffer content */ + if (do_dump) { + pword = (uint32_t *)dmabuf->virt; + for (i = 0; i < *mbx_word_cnt; i++) { + if (!(i % 8)) { + if (i != 0) + printk(KERN_ERR "%s\n", line_buf); + len = 0; + len += snprintf(line_buf+len, + LPFC_MBX_ACC_LBUF_SZ-len, + "%03d: ", i); + } + len += snprintf(line_buf+len, LPFC_MBX_ACC_LBUF_SZ-len, + "%08x ", (uint32_t)*pword); + pword++; + } + if ((i - 1) % 8) + printk(KERN_ERR "%s\n", line_buf); + (*mbx_dump_cnt)--; + } + + /* Clean out command structure on reaching dump count */ + if (*mbx_dump_cnt == 0) + memset(&idiag, 0, sizeof(idiag)); + return; +#endif +} + +/* lpfc_idiag_mbxacc_dump_issue_mbox - idiag debugfs dump issue mailbox command + * @phba: Pointer to HBA context object. + * @dmabuf: Pointer to a DMA buffer descriptor. + * + * Description: + * This routine dump a pass-through non-embedded mailbox command from issue + * mailbox command. + **/ +void +lpfc_idiag_mbxacc_dump_issue_mbox(struct lpfc_hba *phba, MAILBOX_t *pmbox) +{ +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + uint32_t *mbx_dump_map, *mbx_dump_cnt, *mbx_word_cnt, *mbx_mbox_cmd; + char line_buf[LPFC_MBX_ACC_LBUF_SZ]; + int len = 0; + uint32_t *pword; + uint8_t *pbyte; + uint32_t i, j; + + if (idiag.cmd.opcode != LPFC_IDIAG_CMD_MBXACC_DP) + return; + + mbx_mbox_cmd = &idiag.cmd.data[IDIAG_MBXACC_MBCMD_INDX]; + mbx_dump_map = &idiag.cmd.data[IDIAG_MBXACC_DPMAP_INDX]; + mbx_dump_cnt = &idiag.cmd.data[IDIAG_MBXACC_DPCNT_INDX]; + mbx_word_cnt = &idiag.cmd.data[IDIAG_MBXACC_WDCNT_INDX]; + + if (!(*mbx_dump_map & LPFC_MBX_DMP_MBX_ALL) || + (*mbx_dump_cnt == 0) || + (*mbx_word_cnt == 0)) + return; + + if ((*mbx_mbox_cmd != LPFC_MBX_ALL_CMD) && + (*mbx_mbox_cmd != pmbox->mbxCommand)) + return; + + /* dump buffer content */ + if (*mbx_dump_map & LPFC_MBX_DMP_MBX_WORD) { + printk(KERN_ERR "Mailbox command:0x%x dump by word:\n", + pmbox->mbxCommand); + pword = (uint32_t *)pmbox; + for (i = 0; i < *mbx_word_cnt; i++) { + if (!(i % 8)) { + if (i != 0) + printk(KERN_ERR "%s\n", line_buf); + len = 0; + memset(line_buf, 0, LPFC_MBX_ACC_LBUF_SZ); + len += snprintf(line_buf+len, + LPFC_MBX_ACC_LBUF_SZ-len, + "%03d: ", i); + } + len += snprintf(line_buf+len, LPFC_MBX_ACC_LBUF_SZ-len, + "%08x ", + ((uint32_t)*pword) & 0xffffffff); + pword++; + } + if ((i - 1) % 8) + printk(KERN_ERR "%s\n", line_buf); + printk(KERN_ERR "\n"); + } + if (*mbx_dump_map & LPFC_MBX_DMP_MBX_BYTE) { + printk(KERN_ERR "Mailbox command:0x%x dump by byte:\n", + pmbox->mbxCommand); + pbyte = (uint8_t *)pmbox; + for (i = 0; i < *mbx_word_cnt; i++) { + if (!(i % 8)) { + if (i != 0) + printk(KERN_ERR "%s\n", line_buf); + len = 0; + memset(line_buf, 0, LPFC_MBX_ACC_LBUF_SZ); + len += snprintf(line_buf+len, + LPFC_MBX_ACC_LBUF_SZ-len, + "%03d: ", i); + } + for (j = 0; j < 4; j++) { + len += snprintf(line_buf+len, + LPFC_MBX_ACC_LBUF_SZ-len, + "%02x", + ((uint8_t)*pbyte) & 0xff); + pbyte++; + } + len += snprintf(line_buf+len, + LPFC_MBX_ACC_LBUF_SZ-len, " "); + } + if ((i - 1) % 8) + printk(KERN_ERR "%s\n", line_buf); + printk(KERN_ERR "\n"); + } + (*mbx_dump_cnt)--; + + /* Clean out command structure on reaching dump count */ + if (*mbx_dump_cnt == 0) + memset(&idiag, 0, sizeof(idiag)); + return; +#endif +} + +/** + * lpfc_debugfs_initialize - Initialize debugfs for a vport + * @vport: The vport pointer to initialize. + * + * Description: + * When Debugfs is configured this routine sets up the lpfc debugfs file system. + * If not already created, this routine will create the lpfc directory, and + * lpfcX directory (for this HBA), and vportX directory for this vport. It will + * also create each file used to access lpfc specific debugfs information. + **/ +inline void +lpfc_debugfs_initialize(struct lpfc_vport *vport) +{ +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + struct lpfc_hba *phba = vport->phba; + char name[64]; + uint32_t num, i; + bool pport_setup = false; + + if (!lpfc_debugfs_enable) + return; + + /* Setup lpfc root directory */ + if (!lpfc_debugfs_root) { + lpfc_debugfs_root = debugfs_create_dir("lpfc", NULL); + atomic_set(&lpfc_debugfs_hba_count, 0); + if (!lpfc_debugfs_root) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0408 Cannot create debugfs root\n"); + goto debug_failed; + } + } + if (!lpfc_debugfs_start_time) + lpfc_debugfs_start_time = jiffies; + + /* Setup funcX directory for specific HBA PCI function */ + snprintf(name, sizeof(name), "fn%d", phba->brd_no); + if (!phba->hba_debugfs_root) { + pport_setup = true; + phba->hba_debugfs_root = + debugfs_create_dir(name, lpfc_debugfs_root); + if (!phba->hba_debugfs_root) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0412 Cannot create debugfs hba\n"); + goto debug_failed; + } + atomic_inc(&lpfc_debugfs_hba_count); + atomic_set(&phba->debugfs_vport_count, 0); + + /* Setup hbqinfo */ + snprintf(name, sizeof(name), "hbqinfo"); + phba->debug_hbqinfo = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_hbqinfo); + if (!phba->debug_hbqinfo) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0411 Cannot create debugfs hbqinfo\n"); + goto debug_failed; + } + + /* Setup dumpHBASlim */ + if (phba->sli_rev < LPFC_SLI_REV4) { + snprintf(name, sizeof(name), "dumpHBASlim"); + phba->debug_dumpHBASlim = + debugfs_create_file(name, + S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dumpHBASlim); + if (!phba->debug_dumpHBASlim) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0413 Cannot create debugfs " + "dumpHBASlim\n"); + goto debug_failed; + } + } else + phba->debug_dumpHBASlim = NULL; + + /* Setup dumpHostSlim */ + if (phba->sli_rev < LPFC_SLI_REV4) { + snprintf(name, sizeof(name), "dumpHostSlim"); + phba->debug_dumpHostSlim = + debugfs_create_file(name, + S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dumpHostSlim); + if (!phba->debug_dumpHostSlim) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0414 Cannot create debugfs " + "dumpHostSlim\n"); + goto debug_failed; + } + } else + phba->debug_dumpHostSlim = NULL; + + /* Setup dumpData */ + snprintf(name, sizeof(name), "dumpData"); + phba->debug_dumpData = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dumpData); + if (!phba->debug_dumpData) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0800 Cannot create debugfs dumpData\n"); + goto debug_failed; + } + + /* Setup dumpDif */ + snprintf(name, sizeof(name), "dumpDif"); + phba->debug_dumpDif = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dumpDif); + if (!phba->debug_dumpDif) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0801 Cannot create debugfs dumpDif\n"); + goto debug_failed; + } + + /* Setup DIF Error Injections */ + snprintf(name, sizeof(name), "InjErrLBA"); + phba->debug_InjErrLBA = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_InjErrLBA) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0807 Cannot create debugfs InjErrLBA\n"); + goto debug_failed; + } + phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + + snprintf(name, sizeof(name), "InjErrNPortID"); + phba->debug_InjErrNPortID = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_InjErrNPortID) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0809 Cannot create debugfs InjErrNPortID\n"); + goto debug_failed; + } + + snprintf(name, sizeof(name), "InjErrWWPN"); + phba->debug_InjErrWWPN = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_InjErrWWPN) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0810 Cannot create debugfs InjErrWWPN\n"); + goto debug_failed; + } + + snprintf(name, sizeof(name), "writeGuardInjErr"); + phba->debug_writeGuard = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_writeGuard) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0802 Cannot create debugfs writeGuard\n"); + goto debug_failed; + } + + snprintf(name, sizeof(name), "writeAppInjErr"); + phba->debug_writeApp = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_writeApp) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0803 Cannot create debugfs writeApp\n"); + goto debug_failed; + } + + snprintf(name, sizeof(name), "writeRefInjErr"); + phba->debug_writeRef = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_writeRef) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0804 Cannot create debugfs writeRef\n"); + goto debug_failed; + } + + snprintf(name, sizeof(name), "readGuardInjErr"); + phba->debug_readGuard = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_readGuard) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0808 Cannot create debugfs readGuard\n"); + goto debug_failed; + } + + snprintf(name, sizeof(name), "readAppInjErr"); + phba->debug_readApp = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_readApp) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0805 Cannot create debugfs readApp\n"); + goto debug_failed; + } + + snprintf(name, sizeof(name), "readRefInjErr"); + phba->debug_readRef = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_readRef) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0806 Cannot create debugfs readApp\n"); + goto debug_failed; + } + + /* Setup slow ring trace */ + if (lpfc_debugfs_max_slow_ring_trc) { + num = lpfc_debugfs_max_slow_ring_trc - 1; + if (num & lpfc_debugfs_max_slow_ring_trc) { + /* Change to be a power of 2 */ + num = lpfc_debugfs_max_slow_ring_trc; + i = 0; + while (num > 1) { + num = num >> 1; + i++; + } + lpfc_debugfs_max_slow_ring_trc = (1 << i); + printk(KERN_ERR + "lpfc_debugfs_max_disc_trc changed to " + "%d\n", lpfc_debugfs_max_disc_trc); + } + } + + snprintf(name, sizeof(name), "slow_ring_trace"); + phba->debug_slow_ring_trc = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_slow_ring_trc); + if (!phba->debug_slow_ring_trc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0415 Cannot create debugfs " + "slow_ring_trace\n"); + goto debug_failed; + } + if (!phba->slow_ring_trc) { + phba->slow_ring_trc = kmalloc( + (sizeof(struct lpfc_debugfs_trc) * + lpfc_debugfs_max_slow_ring_trc), + GFP_KERNEL); + if (!phba->slow_ring_trc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0416 Cannot create debugfs " + "slow_ring buffer\n"); + goto debug_failed; + } + atomic_set(&phba->slow_ring_trc_cnt, 0); + memset(phba->slow_ring_trc, 0, + (sizeof(struct lpfc_debugfs_trc) * + lpfc_debugfs_max_slow_ring_trc)); + } + } + + snprintf(name, sizeof(name), "vport%d", vport->vpi); + if (!vport->vport_debugfs_root) { + vport->vport_debugfs_root = + debugfs_create_dir(name, phba->hba_debugfs_root); + if (!vport->vport_debugfs_root) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0417 Can't create debugfs\n"); + goto debug_failed; + } + atomic_inc(&phba->debugfs_vport_count); + } + + if (lpfc_debugfs_max_disc_trc) { + num = lpfc_debugfs_max_disc_trc - 1; + if (num & lpfc_debugfs_max_disc_trc) { + /* Change to be a power of 2 */ + num = lpfc_debugfs_max_disc_trc; + i = 0; + while (num > 1) { + num = num >> 1; + i++; + } + lpfc_debugfs_max_disc_trc = (1 << i); + printk(KERN_ERR + "lpfc_debugfs_max_disc_trc changed to %d\n", + lpfc_debugfs_max_disc_trc); + } + } + + vport->disc_trc = kzalloc( + (sizeof(struct lpfc_debugfs_trc) * lpfc_debugfs_max_disc_trc), + GFP_KERNEL); + + if (!vport->disc_trc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0418 Cannot create debugfs disc trace " + "buffer\n"); + goto debug_failed; + } + atomic_set(&vport->disc_trc_cnt, 0); + + snprintf(name, sizeof(name), "discovery_trace"); + vport->debug_disc_trc = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + vport->vport_debugfs_root, + vport, &lpfc_debugfs_op_disc_trc); + if (!vport->debug_disc_trc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0419 Cannot create debugfs " + "discovery_trace\n"); + goto debug_failed; + } + snprintf(name, sizeof(name), "nodelist"); + vport->debug_nodelist = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + vport->vport_debugfs_root, + vport, &lpfc_debugfs_op_nodelist); + if (!vport->debug_nodelist) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2985 Can't create debugfs nodelist\n"); + goto debug_failed; + } + + /* + * The following section is for additional directories/files for the + * physical port. + */ + + if (!pport_setup) + goto debug_failed; + + /* + * iDiag debugfs root entry points for SLI4 device only + */ + if (phba->sli_rev < LPFC_SLI_REV4) + goto debug_failed; + + snprintf(name, sizeof(name), "iDiag"); + if (!phba->idiag_root) { + phba->idiag_root = + debugfs_create_dir(name, phba->hba_debugfs_root); + if (!phba->idiag_root) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2922 Can't create idiag debugfs\n"); + goto debug_failed; + } + /* Initialize iDiag data structure */ + memset(&idiag, 0, sizeof(idiag)); + } + + /* iDiag read PCI config space */ + snprintf(name, sizeof(name), "pciCfg"); + if (!phba->idiag_pci_cfg) { + phba->idiag_pci_cfg = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->idiag_root, phba, &lpfc_idiag_op_pciCfg); + if (!phba->idiag_pci_cfg) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2923 Can't create idiag debugfs\n"); + goto debug_failed; + } + idiag.offset.last_rd = 0; + } + + /* iDiag PCI BAR access */ + snprintf(name, sizeof(name), "barAcc"); + if (!phba->idiag_bar_acc) { + phba->idiag_bar_acc = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->idiag_root, phba, &lpfc_idiag_op_barAcc); + if (!phba->idiag_bar_acc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "3056 Can't create idiag debugfs\n"); + goto debug_failed; + } + idiag.offset.last_rd = 0; + } + + /* iDiag get PCI function queue information */ + snprintf(name, sizeof(name), "queInfo"); + if (!phba->idiag_que_info) { + phba->idiag_que_info = + debugfs_create_file(name, S_IFREG|S_IRUGO, + phba->idiag_root, phba, &lpfc_idiag_op_queInfo); + if (!phba->idiag_que_info) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2924 Can't create idiag debugfs\n"); + goto debug_failed; + } + } + + /* iDiag access PCI function queue */ + snprintf(name, sizeof(name), "queAcc"); + if (!phba->idiag_que_acc) { + phba->idiag_que_acc = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->idiag_root, phba, &lpfc_idiag_op_queAcc); + if (!phba->idiag_que_acc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2926 Can't create idiag debugfs\n"); + goto debug_failed; + } + } + + /* iDiag access PCI function doorbell registers */ + snprintf(name, sizeof(name), "drbAcc"); + if (!phba->idiag_drb_acc) { + phba->idiag_drb_acc = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->idiag_root, phba, &lpfc_idiag_op_drbAcc); + if (!phba->idiag_drb_acc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2927 Can't create idiag debugfs\n"); + goto debug_failed; + } + } + + /* iDiag access PCI function control registers */ + snprintf(name, sizeof(name), "ctlAcc"); + if (!phba->idiag_ctl_acc) { + phba->idiag_ctl_acc = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->idiag_root, phba, &lpfc_idiag_op_ctlAcc); + if (!phba->idiag_ctl_acc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2981 Can't create idiag debugfs\n"); + goto debug_failed; + } + } + + /* iDiag access mbox commands */ + snprintf(name, sizeof(name), "mbxAcc"); + if (!phba->idiag_mbx_acc) { + phba->idiag_mbx_acc = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->idiag_root, phba, &lpfc_idiag_op_mbxAcc); + if (!phba->idiag_mbx_acc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2980 Can't create idiag debugfs\n"); + goto debug_failed; + } + } + + /* iDiag extents access commands */ + if (phba->sli4_hba.extents_in_use) { + snprintf(name, sizeof(name), "extAcc"); + if (!phba->idiag_ext_acc) { + phba->idiag_ext_acc = + debugfs_create_file(name, + S_IFREG|S_IRUGO|S_IWUSR, + phba->idiag_root, phba, + &lpfc_idiag_op_extAcc); + if (!phba->idiag_ext_acc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2986 Cant create " + "idiag debugfs\n"); + goto debug_failed; + } + } + } + +debug_failed: + return; +#endif +} + +/** + * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport + * @vport: The vport pointer to remove from debugfs. + * + * Description: + * When Debugfs is configured this routine removes debugfs file system elements + * that are specific to this vport. It also checks to see if there are any + * users left for the debugfs directories associated with the HBA and driver. If + * this is the last user of the HBA directory or driver directory then it will + * remove those from the debugfs infrastructure as well. + **/ +inline void +lpfc_debugfs_terminate(struct lpfc_vport *vport) +{ +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + struct lpfc_hba *phba = vport->phba; + + if (vport->disc_trc) { + kfree(vport->disc_trc); + vport->disc_trc = NULL; + } + if (vport->debug_disc_trc) { + debugfs_remove(vport->debug_disc_trc); /* discovery_trace */ + vport->debug_disc_trc = NULL; + } + if (vport->debug_nodelist) { + debugfs_remove(vport->debug_nodelist); /* nodelist */ + vport->debug_nodelist = NULL; + } + if (vport->vport_debugfs_root) { + debugfs_remove(vport->vport_debugfs_root); /* vportX */ + vport->vport_debugfs_root = NULL; + atomic_dec(&phba->debugfs_vport_count); + } + if (atomic_read(&phba->debugfs_vport_count) == 0) { + + if (phba->debug_hbqinfo) { + debugfs_remove(phba->debug_hbqinfo); /* hbqinfo */ + phba->debug_hbqinfo = NULL; + } + if (phba->debug_dumpHBASlim) { + debugfs_remove(phba->debug_dumpHBASlim); /* HBASlim */ + phba->debug_dumpHBASlim = NULL; + } + if (phba->debug_dumpHostSlim) { + debugfs_remove(phba->debug_dumpHostSlim); /* HostSlim */ + phba->debug_dumpHostSlim = NULL; + } + if (phba->debug_dumpData) { + debugfs_remove(phba->debug_dumpData); /* dumpData */ + phba->debug_dumpData = NULL; + } + + if (phba->debug_dumpDif) { + debugfs_remove(phba->debug_dumpDif); /* dumpDif */ + phba->debug_dumpDif = NULL; + } + if (phba->debug_InjErrLBA) { + debugfs_remove(phba->debug_InjErrLBA); /* InjErrLBA */ + phba->debug_InjErrLBA = NULL; + } + if (phba->debug_InjErrNPortID) { /* InjErrNPortID */ + debugfs_remove(phba->debug_InjErrNPortID); + phba->debug_InjErrNPortID = NULL; + } + if (phba->debug_InjErrWWPN) { + debugfs_remove(phba->debug_InjErrWWPN); /* InjErrWWPN */ + phba->debug_InjErrWWPN = NULL; + } + if (phba->debug_writeGuard) { + debugfs_remove(phba->debug_writeGuard); /* writeGuard */ + phba->debug_writeGuard = NULL; + } + if (phba->debug_writeApp) { + debugfs_remove(phba->debug_writeApp); /* writeApp */ + phba->debug_writeApp = NULL; + } + if (phba->debug_writeRef) { + debugfs_remove(phba->debug_writeRef); /* writeRef */ + phba->debug_writeRef = NULL; + } + if (phba->debug_readGuard) { + debugfs_remove(phba->debug_readGuard); /* readGuard */ + phba->debug_readGuard = NULL; + } + if (phba->debug_readApp) { + debugfs_remove(phba->debug_readApp); /* readApp */ + phba->debug_readApp = NULL; + } + if (phba->debug_readRef) { + debugfs_remove(phba->debug_readRef); /* readRef */ + phba->debug_readRef = NULL; + } + + if (phba->slow_ring_trc) { + kfree(phba->slow_ring_trc); + phba->slow_ring_trc = NULL; + } + if (phba->debug_slow_ring_trc) { + /* slow_ring_trace */ + debugfs_remove(phba->debug_slow_ring_trc); + phba->debug_slow_ring_trc = NULL; + } + + /* + * iDiag release + */ + if (phba->sli_rev == LPFC_SLI_REV4) { + if (phba->idiag_ext_acc) { + /* iDiag extAcc */ + debugfs_remove(phba->idiag_ext_acc); + phba->idiag_ext_acc = NULL; + } + if (phba->idiag_mbx_acc) { + /* iDiag mbxAcc */ + debugfs_remove(phba->idiag_mbx_acc); + phba->idiag_mbx_acc = NULL; + } + if (phba->idiag_ctl_acc) { + /* iDiag ctlAcc */ + debugfs_remove(phba->idiag_ctl_acc); + phba->idiag_ctl_acc = NULL; + } + if (phba->idiag_drb_acc) { + /* iDiag drbAcc */ + debugfs_remove(phba->idiag_drb_acc); + phba->idiag_drb_acc = NULL; + } + if (phba->idiag_que_acc) { + /* iDiag queAcc */ + debugfs_remove(phba->idiag_que_acc); + phba->idiag_que_acc = NULL; + } + if (phba->idiag_que_info) { + /* iDiag queInfo */ + debugfs_remove(phba->idiag_que_info); + phba->idiag_que_info = NULL; + } + if (phba->idiag_bar_acc) { + /* iDiag barAcc */ + debugfs_remove(phba->idiag_bar_acc); + phba->idiag_bar_acc = NULL; + } + if (phba->idiag_pci_cfg) { + /* iDiag pciCfg */ + debugfs_remove(phba->idiag_pci_cfg); + phba->idiag_pci_cfg = NULL; + } + + /* Finally remove the iDiag debugfs root */ + if (phba->idiag_root) { + /* iDiag root */ + debugfs_remove(phba->idiag_root); + phba->idiag_root = NULL; + } + } + + if (phba->hba_debugfs_root) { + debugfs_remove(phba->hba_debugfs_root); /* fnX */ + phba->hba_debugfs_root = NULL; + atomic_dec(&lpfc_debugfs_hba_count); + } + + if (atomic_read(&lpfc_debugfs_hba_count) == 0) { + debugfs_remove(lpfc_debugfs_root); /* lpfc */ + lpfc_debugfs_root = NULL; + } + } +#endif + return; +} + +/* + * Driver debug utility routines outside of debugfs. The debug utility + * routines implemented here is intended to be used in the instrumented + * debug driver for debugging host or port issues. + */ + +/** + * lpfc_debug_dump_all_queues - dump all the queues with a hba + * @phba: Pointer to HBA context object. + * + * This function dumps entries of all the queues asociated with the @phba. + **/ +void +lpfc_debug_dump_all_queues(struct lpfc_hba *phba) +{ + int fcp_wqidx; + + /* + * Dump Work Queues (WQs) + */ + lpfc_debug_dump_mbx_wq(phba); + lpfc_debug_dump_els_wq(phba); + + for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_io_channel; fcp_wqidx++) + lpfc_debug_dump_fcp_wq(phba, fcp_wqidx); + + lpfc_debug_dump_hdr_rq(phba); + lpfc_debug_dump_dat_rq(phba); + /* + * Dump Complete Queues (CQs) + */ + lpfc_debug_dump_mbx_cq(phba); + lpfc_debug_dump_els_cq(phba); + + for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_io_channel; fcp_wqidx++) + lpfc_debug_dump_fcp_cq(phba, fcp_wqidx); + + /* + * Dump Event Queues (EQs) + */ + for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_io_channel; fcp_wqidx++) + lpfc_debug_dump_hba_eq(phba, fcp_wqidx); +} |