diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_disc.h')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_disc.h | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h new file mode 100644 index 000000000..697702797 --- /dev/null +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -0,0 +1,272 @@ +/******************************************************************* + * This file is part of the Emulex Linux Device Driver for * + * Fibre Channel Host Bus Adapters. * + * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * EMULEX and SLI are trademarks of Emulex. * + * www.emulex.com * + * * + * This program is free software; you can redistribute it and/or * + * modify it under the terms of version 2 of the GNU General * + * Public License as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful. * + * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * + * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * + * TO BE LEGALLY INVALID. See the GNU General Public License for * + * more details, a copy of which can be found in the file COPYING * + * included with this package. * + *******************************************************************/ + +#define FC_MAX_HOLD_RSCN 32 /* max number of deferred RSCNs */ +#define FC_MAX_NS_RSP 64512 /* max size NameServer rsp */ +#define FC_MAXLOOP 126 /* max devices supported on a fc loop */ +#define LPFC_DISC_FLOGI_TMO 10 /* Discovery FLOGI ratov */ + + +/* This is the protocol dependent definition for a Node List Entry. + * This is used by Fibre Channel protocol to support FCP. + */ + +/* worker thread events */ +enum lpfc_work_type { + LPFC_EVT_ONLINE, + LPFC_EVT_OFFLINE_PREP, + LPFC_EVT_OFFLINE, + LPFC_EVT_WARM_START, + LPFC_EVT_KILL, + LPFC_EVT_ELS_RETRY, + LPFC_EVT_DEV_LOSS, + LPFC_EVT_FASTPATH_MGMT_EVT, + LPFC_EVT_RESET_HBA, +}; + +/* structure used to queue event to the discovery tasklet */ +struct lpfc_work_evt { + struct list_head evt_listp; + void *evt_arg1; + void *evt_arg2; + enum lpfc_work_type evt; +}; + +struct lpfc_scsi_check_condition_event; +struct lpfc_scsi_varqueuedepth_event; +struct lpfc_scsi_event_header; +struct lpfc_fabric_event_header; +struct lpfc_fcprdchkerr_event; + +/* structure used for sending events from fast path */ +struct lpfc_fast_path_event { + struct lpfc_work_evt work_evt; + struct lpfc_vport *vport; + union { + struct lpfc_scsi_check_condition_event check_cond_evt; + struct lpfc_scsi_varqueuedepth_event queue_depth_evt; + struct lpfc_scsi_event_header scsi_evt; + struct lpfc_fabric_event_header fabric_evt; + struct lpfc_fcprdchkerr_event read_check_error; + } un; +}; + +#define LPFC_SLI4_MAX_XRI 1024 /* Used to make the ndlp's xri_bitmap */ +#define XRI_BITMAP_ULONGS (LPFC_SLI4_MAX_XRI / BITS_PER_LONG) +struct lpfc_node_rrqs { + unsigned long xri_bitmap[XRI_BITMAP_ULONGS]; +}; + +struct lpfc_nodelist { + struct list_head nlp_listp; + struct lpfc_name nlp_portname; + struct lpfc_name nlp_nodename; + uint32_t nlp_flag; /* entry flags */ + uint32_t nlp_add_flag; /* additional flags */ + uint32_t nlp_DID; /* FC D_ID of entry */ + uint32_t nlp_last_elscmd; /* Last ELS cmd sent */ + uint16_t nlp_type; +#define NLP_FC_NODE 0x1 /* entry is an FC node */ +#define NLP_FABRIC 0x4 /* entry rep a Fabric entity */ +#define NLP_FCP_TARGET 0x8 /* entry is an FCP target */ +#define NLP_FCP_INITIATOR 0x10 /* entry is an FCP Initiator */ + + uint16_t nlp_rpi; + uint16_t nlp_state; /* state transition indicator */ + uint16_t nlp_prev_state; /* state transition indicator */ + uint16_t nlp_xri; /* output exchange id for RPI */ + uint16_t nlp_sid; /* scsi id */ +#define NLP_NO_SID 0xffff + uint16_t nlp_maxframe; /* Max RCV frame size */ + uint8_t nlp_class_sup; /* Supported Classes */ + uint8_t nlp_retry; /* used for ELS retries */ + uint8_t nlp_fcp_info; /* class info, bits 0-3 */ +#define NLP_FCP_2_DEVICE 0x10 /* FCP-2 device */ + + uint16_t nlp_usg_map; /* ndlp management usage bitmap */ +#define NLP_USG_NODE_ACT_BIT 0x1 /* Indicate ndlp is actively used */ +#define NLP_USG_IACT_REQ_BIT 0x2 /* Request to inactivate ndlp */ +#define NLP_USG_FREE_REQ_BIT 0x4 /* Request to invoke ndlp memory free */ +#define NLP_USG_FREE_ACK_BIT 0x8 /* Indicate ndlp memory free invoked */ + + struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */ + struct lpfc_hba *phba; + struct fc_rport *rport; /* Corresponding FC transport + port structure */ + struct lpfc_vport *vport; + struct lpfc_work_evt els_retry_evt; + struct lpfc_work_evt dev_loss_evt; + struct kref kref; + atomic_t cmd_pending; + uint32_t cmd_qdepth; + unsigned long last_change_time; + unsigned long *active_rrqs_xri_bitmap; + struct lpfc_scsicmd_bkt *lat_data; /* Latency data */ +}; +struct lpfc_node_rrq { + struct list_head list; + uint16_t xritag; + uint16_t send_rrq; + uint16_t rxid; + uint32_t nlp_DID; /* FC D_ID of entry */ + struct lpfc_vport *vport; + struct lpfc_nodelist *ndlp; + unsigned long rrq_stop_time; +}; + +/* Defines for nlp_flag (uint32) */ +#define NLP_IGNR_REG_CMPL 0x00000001 /* Rcvd rscn before we cmpl reg login */ +#define NLP_REG_LOGIN_SEND 0x00000002 /* sent reglogin to adapter */ +#define NLP_PLOGI_SND 0x00000020 /* sent PLOGI request for this entry */ +#define NLP_PRLI_SND 0x00000040 /* sent PRLI request for this entry */ +#define NLP_ADISC_SND 0x00000080 /* sent ADISC request for this entry */ +#define NLP_LOGO_SND 0x00000100 /* sent LOGO request for this entry */ +#define NLP_RNID_SND 0x00000400 /* sent RNID request for this entry */ +#define NLP_ELS_SND_MASK 0x000007e0 /* sent ELS request for this entry */ +#define NLP_DEFER_RM 0x00010000 /* Remove this ndlp if no longer used */ +#define NLP_DELAY_TMO 0x00020000 /* delay timeout is running for node */ +#define NLP_NPR_2B_DISC 0x00040000 /* node is included in num_disc_nodes */ +#define NLP_RCV_PLOGI 0x00080000 /* Rcv'ed PLOGI from remote system */ +#define NLP_LOGO_ACC 0x00100000 /* Process LOGO after ACC completes */ +#define NLP_TGT_NO_SCSIID 0x00200000 /* good PRLI but no binding for scsid */ +#define NLP_ISSUE_LOGO 0x00400000 /* waiting to issue a LOGO */ +#define NLP_ACC_REGLOGIN 0x01000000 /* Issue Reg Login after successful + ACC */ +#define NLP_NPR_ADISC 0x02000000 /* Issue ADISC when dq'ed from + NPR list */ +#define NLP_RM_DFLT_RPI 0x04000000 /* need to remove leftover dflt RPI */ +#define NLP_NODEV_REMOVE 0x08000000 /* Defer removal till discovery ends */ +#define NLP_TARGET_REMOVE 0x10000000 /* Target remove in process */ +#define NLP_SC_REQ 0x20000000 /* Target requires authentication */ +#define NLP_FIRSTBURST 0x40000000 /* Target supports FirstBurst */ +#define NLP_RPI_REGISTERED 0x80000000 /* nlp_rpi is valid */ + +/* Defines for nlp_add_flag (uint32) */ +#define NLP_IN_DEV_LOSS 0x00000001 /* Dev Loss processing in progress */ + +/* ndlp usage management macros */ +#define NLP_CHK_NODE_ACT(ndlp) (((ndlp)->nlp_usg_map \ + & NLP_USG_NODE_ACT_BIT) \ + && \ + !((ndlp)->nlp_usg_map \ + & NLP_USG_FREE_ACK_BIT)) +#define NLP_SET_NODE_ACT(ndlp) ((ndlp)->nlp_usg_map \ + |= NLP_USG_NODE_ACT_BIT) +#define NLP_INT_NODE_ACT(ndlp) ((ndlp)->nlp_usg_map \ + = NLP_USG_NODE_ACT_BIT) +#define NLP_CLR_NODE_ACT(ndlp) ((ndlp)->nlp_usg_map \ + &= ~NLP_USG_NODE_ACT_BIT) +#define NLP_CHK_IACT_REQ(ndlp) ((ndlp)->nlp_usg_map \ + & NLP_USG_IACT_REQ_BIT) +#define NLP_SET_IACT_REQ(ndlp) ((ndlp)->nlp_usg_map \ + |= NLP_USG_IACT_REQ_BIT) +#define NLP_CHK_FREE_REQ(ndlp) ((ndlp)->nlp_usg_map \ + & NLP_USG_FREE_REQ_BIT) +#define NLP_SET_FREE_REQ(ndlp) ((ndlp)->nlp_usg_map \ + |= NLP_USG_FREE_REQ_BIT) +#define NLP_CHK_FREE_ACK(ndlp) ((ndlp)->nlp_usg_map \ + & NLP_USG_FREE_ACK_BIT) +#define NLP_SET_FREE_ACK(ndlp) ((ndlp)->nlp_usg_map \ + |= NLP_USG_FREE_ACK_BIT) + +/* There are 4 different double linked lists nodelist entries can reside on. + * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used + * when Link Up discovery or Registered State Change Notification (RSCN) + * processing is needed. Each list holds the nodes that require a PLOGI or + * ADISC Extended Link Service (ELS) request. These lists keep track of the + * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected + * by Link Up) event. The unmapped_list contains all nodes that have + * successfully logged into at the Fibre Channel level. The + * mapped_list will contain all nodes that are mapped FCP targets. + * + * The bind list is a list of undiscovered (potentially non-existent) nodes + * that we have saved binding information on. This information is used when + * nodes transition from the unmapped to the mapped list. + */ + +/* Defines for nlp_state */ +#define NLP_STE_UNUSED_NODE 0x0 /* node is just allocated */ +#define NLP_STE_PLOGI_ISSUE 0x1 /* PLOGI was sent to NL_PORT */ +#define NLP_STE_ADISC_ISSUE 0x2 /* ADISC was sent to NL_PORT */ +#define NLP_STE_REG_LOGIN_ISSUE 0x3 /* REG_LOGIN was issued for NL_PORT */ +#define NLP_STE_PRLI_ISSUE 0x4 /* PRLI was sent to NL_PORT */ +#define NLP_STE_LOGO_ISSUE 0x5 /* LOGO was sent to NL_PORT */ +#define NLP_STE_UNMAPPED_NODE 0x6 /* PRLI completed from NL_PORT */ +#define NLP_STE_MAPPED_NODE 0x7 /* Identified as a FCP Target */ +#define NLP_STE_NPR_NODE 0x8 /* NPort disappeared */ +#define NLP_STE_MAX_STATE 0x9 +#define NLP_STE_FREED_NODE 0xff /* node entry was freed to MEM_NLP */ + +/* For UNUSED_NODE state, the node has just been allocated. + * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on + * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list + * and put on the unmapped list. For ADISC processing, the node is taken off + * the ADISC list and placed on either the mapped or unmapped list (depending + * on its previous state). Once on the unmapped list, a PRLI is issued and the + * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is + * changed to PRLI_COMPL. If the completion indicates a mapped + * node, the node is taken off the unmapped list. The binding list is checked + * for a valid binding, or a binding is automatically assigned. If binding + * assignment is unsuccessful, the node is left on the unmapped list. If + * binding assignment is successful, the associated binding list entry (if + * any) is removed, and the node is placed on the mapped list. + */ +/* + * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped + * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers + * expire, all effected nodes will receive a DEVICE_RM event. + */ +/* + * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists + * to either the ADISC or PLOGI list. After a Nameserver query or ALPA loopmap + * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to / + * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated, + * we will first process the ADISC list. 32 entries are processed initially and + * ADISC is initited for each one. Completions / Events for each node are + * funnelled thru the state machine. As each node finishes ADISC processing, it + * starts ADISC for any nodes waiting for ADISC processing. If no nodes are + * waiting, and the ADISC list count is identically 0, then we are done. For + * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we + * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI + * list. 32 entries are processed initially and PLOGI is initited for each one. + * Completions / Events for each node are funnelled thru the state machine. As + * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting + * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is + * identically 0, then we are done. We have now completed discovery / RSCN + * handling. Upon completion, ALL nodes should be on either the mapped or + * unmapped lists. + */ + +/* Defines for Node List Entry Events that could happen */ +#define NLP_EVT_RCV_PLOGI 0x0 /* Rcv'd an ELS PLOGI command */ +#define NLP_EVT_RCV_PRLI 0x1 /* Rcv'd an ELS PRLI command */ +#define NLP_EVT_RCV_LOGO 0x2 /* Rcv'd an ELS LOGO command */ +#define NLP_EVT_RCV_ADISC 0x3 /* Rcv'd an ELS ADISC command */ +#define NLP_EVT_RCV_PDISC 0x4 /* Rcv'd an ELS PDISC command */ +#define NLP_EVT_RCV_PRLO 0x5 /* Rcv'd an ELS PRLO command */ +#define NLP_EVT_CMPL_PLOGI 0x6 /* Sent an ELS PLOGI command */ +#define NLP_EVT_CMPL_PRLI 0x7 /* Sent an ELS PRLI command */ +#define NLP_EVT_CMPL_LOGO 0x8 /* Sent an ELS LOGO command */ +#define NLP_EVT_CMPL_ADISC 0x9 /* Sent an ELS ADISC command */ +#define NLP_EVT_CMPL_REG_LOGIN 0xa /* REG_LOGIN mbox cmd completed */ +#define NLP_EVT_DEVICE_RM 0xb /* Device not found in NS / ALPAmap */ +#define NLP_EVT_DEVICE_RECOVERY 0xc /* Device existence unknown */ +#define NLP_EVT_MAX_EVENT 0xd + |