diff options
Diffstat (limited to 'drivers/scsi/pcmcia/nsp_cs.h')
| -rw-r--r-- | drivers/scsi/pcmcia/nsp_cs.h | 392 |
1 files changed, 392 insertions, 0 deletions
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h new file mode 100644 index 000000000..afd64f0ad --- /dev/null +++ b/drivers/scsi/pcmcia/nsp_cs.h @@ -0,0 +1,392 @@ +/*=======================================================/ + Header file for nsp_cs.c + By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> + + Ver.1.0 : Cut unused lines. + Ver 0.1 : Initial version. + + This software may be used and distributed according to the terms of + the GNU General Public License. + +=========================================================*/ + +#ifndef __nsp_cs__ +#define __nsp_cs__ + +/* for debugging */ +//#define NSP_DEBUG 9 + +/* +#define static +#define inline +*/ + +/************************************ + * Some useful macros... + */ + +/* SCSI initiator must be ID 7 */ +#define NSP_INITIATOR_ID 7 + +#define NSP_SELTIMEOUT 200 + +/*************************************************************************** + * register definitions + ***************************************************************************/ +/*======================================================================== + * base register + ========================================================================*/ +#define IRQCONTROL 0x00 /* R */ +# define IRQCONTROL_RESELECT_CLEAR BIT(0) +# define IRQCONTROL_PHASE_CHANGE_CLEAR BIT(1) +# define IRQCONTROL_TIMER_CLEAR BIT(2) +# define IRQCONTROL_FIFO_CLEAR BIT(3) +# define IRQCONTROL_ALLMASK 0xff +# define IRQCONTROL_ALLCLEAR (IRQCONTROL_RESELECT_CLEAR | \ + IRQCONTROL_PHASE_CHANGE_CLEAR | \ + IRQCONTROL_TIMER_CLEAR | \ + IRQCONTROL_FIFO_CLEAR ) +# define IRQCONTROL_IRQDISABLE 0xf0 + +#define IRQSTATUS 0x00 /* W */ +# define IRQSTATUS_SCSI BIT(0) +# define IRQSTATUS_TIMER BIT(2) +# define IRQSTATUS_FIFO BIT(3) +# define IRQSTATUS_MASK 0x0f + +#define IFSELECT 0x01 /* W */ +# define IF_IFSEL BIT(0) +# define IF_REGSEL BIT(2) + +#define FIFOSTATUS 0x01 /* R */ +# define FIFOSTATUS_CHIP_REVISION_MASK 0x0f +# define FIFOSTATUS_CHIP_ID_MASK 0x70 +# define FIFOSTATUS_FULL_EMPTY BIT(7) + +#define INDEXREG 0x02 /* R/W */ +#define DATAREG 0x03 /* R/W */ +#define FIFODATA 0x04 /* R/W */ +#define FIFODATA1 0x05 /* R/W */ +#define FIFODATA2 0x06 /* R/W */ +#define FIFODATA3 0x07 /* R/W */ + +/*==================================================================== + * indexed register + ====================================================================*/ +#define EXTBUSCTRL 0x10 /* R/W,deleted */ + +#define CLOCKDIV 0x11 /* R/W */ +# define CLOCK_40M 0x02 +# define CLOCK_20M 0x01 +# define FAST_20 BIT(2) + +#define TERMPWRCTRL 0x13 /* R/W */ +# define POWER_ON BIT(0) + +#define SCSIIRQMODE 0x15 /* R/W */ +# define SCSI_PHASE_CHANGE_EI BIT(0) +# define RESELECT_EI BIT(4) +# define FIFO_IRQ_EI BIT(5) +# define SCSI_RESET_IRQ_EI BIT(6) + +#define IRQPHASESENCE 0x16 /* R */ +# define LATCHED_MSG BIT(0) +# define LATCHED_IO BIT(1) +# define LATCHED_CD BIT(2) +# define LATCHED_BUS_FREE BIT(3) +# define PHASE_CHANGE_IRQ BIT(4) +# define RESELECT_IRQ BIT(5) +# define FIFO_IRQ BIT(6) +# define SCSI_RESET_IRQ BIT(7) + +#define TIMERCOUNT 0x17 /* R/W */ + +#define SCSIBUSCTRL 0x18 /* R/W */ +# define SCSI_SEL BIT(0) +# define SCSI_RST BIT(1) +# define SCSI_DATAOUT_ENB BIT(2) +# define SCSI_ATN BIT(3) +# define SCSI_ACK BIT(4) +# define SCSI_BSY BIT(5) +# define AUTODIRECTION BIT(6) +# define ACKENB BIT(7) + +#define SCSIBUSMON 0x19 /* R */ + +#define SETARBIT 0x1A /* W */ +# define ARBIT_GO BIT(0) +# define ARBIT_FLAG_CLEAR BIT(1) + +#define ARBITSTATUS 0x1A /* R */ +/*# define ARBIT_GO BIT(0)*/ +# define ARBIT_WIN BIT(1) +# define ARBIT_FAIL BIT(2) +# define RESELECT_FLAG BIT(3) + +#define PARITYCTRL 0x1B /* W */ +#define PARITYSTATUS 0x1B /* R */ + +#define COMMANDCTRL 0x1C /* W */ +# define CLEAR_COMMAND_POINTER BIT(0) +# define AUTO_COMMAND_GO BIT(1) + +#define RESELECTID 0x1C /* R */ +#define COMMANDDATA 0x1D /* R/W */ + +#define POINTERCLR 0x1E /* W */ +# define POINTER_CLEAR BIT(0) +# define ACK_COUNTER_CLEAR BIT(1) +# define REQ_COUNTER_CLEAR BIT(2) +# define HOST_COUNTER_CLEAR BIT(3) +# define READ_SOURCE (BIT(4) | BIT(5)) +# define ACK_COUNTER (0) +# define REQ_COUNTER (BIT(4)) +# define HOST_COUNTER (BIT(5)) + +#define TRANSFERCOUNT 0x1E /* R */ + +#define TRANSFERMODE 0x20 /* R/W */ +# define MODE_MEM8 BIT(0) +# define MODE_MEM32 BIT(1) +# define MODE_ADR24 BIT(2) +# define MODE_ADR32 BIT(3) +# define MODE_IO8 BIT(4) +# define MODE_IO32 BIT(5) +# define TRANSFER_GO BIT(6) +# define BRAIND BIT(7) + +#define SYNCREG 0x21 /* R/W */ +# define SYNCREG_OFFSET_MASK 0x0f +# define SYNCREG_PERIOD_MASK 0xf0 +# define SYNCREG_PERIOD_SHIFT 4 + +#define SCSIDATALATCH 0x22 /* W */ +#define SCSIDATAIN 0x22 /* R */ +#define SCSIDATAWITHACK 0x23 /* R/W */ +#define SCAMCONTROL 0x24 /* W */ +#define SCAMSTATUS 0x24 /* R */ +#define SCAMDATA 0x25 /* R/W */ + +#define OTHERCONTROL 0x26 /* R/W */ +# define TPL_ROM_WRITE_EN BIT(0) +# define TPWR_OUT BIT(1) +# define TPWR_SENSE BIT(2) +# define RA8_CONTROL BIT(3) + +#define ACKWIDTH 0x27 /* R/W */ +#define CLRTESTPNT 0x28 /* W */ +#define ACKCNTLD 0x29 /* W */ +#define REQCNTLD 0x2A /* W */ +#define HSTCNTLD 0x2B /* W */ +#define CHECKSUM 0x2C /* R/W */ + +/************************************************************************ + * Input status bit definitions. + ************************************************************************/ +#define S_MESSAGE BIT(0) /* Message line from SCSI bus */ +#define S_IO BIT(1) /* Input/Output line from SCSI bus */ +#define S_CD BIT(2) /* Command/Data line from SCSI bus */ +#define S_BUSY BIT(3) /* Busy line from SCSI bus */ +#define S_ACK BIT(4) /* Acknowledge line from SCSI bus */ +#define S_REQUEST BIT(5) /* Request line from SCSI bus */ +#define S_SELECT BIT(6) /* */ +#define S_ATN BIT(7) /* */ + +/*********************************************************************** + * Useful Bus Monitor status combinations. + ***********************************************************************/ +#define BUSMON_SEL S_SELECT +#define BUSMON_BSY S_BUSY +#define BUSMON_REQ S_REQUEST +#define BUSMON_IO S_IO +#define BUSMON_ACK S_ACK +#define BUSMON_BUS_FREE 0 +#define BUSMON_COMMAND ( S_BUSY | S_CD | S_REQUEST ) +#define BUSMON_MESSAGE_IN ( S_BUSY | S_CD | S_IO | S_MESSAGE | S_REQUEST ) +#define BUSMON_MESSAGE_OUT ( S_BUSY | S_CD | S_MESSAGE | S_REQUEST ) +#define BUSMON_DATA_IN ( S_BUSY | S_IO | S_REQUEST ) +#define BUSMON_DATA_OUT ( S_BUSY | S_REQUEST ) +#define BUSMON_STATUS ( S_BUSY | S_CD | S_IO | S_REQUEST ) +#define BUSMON_SELECT ( S_IO | S_SELECT ) +#define BUSMON_RESELECT ( S_IO | S_SELECT ) +#define BUSMON_PHASE_MASK ( S_CD | S_IO | S_MESSAGE | S_SELECT ) + +#define BUSPHASE_SELECT ( BUSMON_SELECT & BUSMON_PHASE_MASK ) +#define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK ) +#define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK ) +#define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK ) +#define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK ) +#define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK ) +#define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK ) + +/*====================================================================*/ + +typedef struct scsi_info_t { + struct pcmcia_device *p_dev; + struct Scsi_Host *host; + int stop; +} scsi_info_t; + + +/* synchronous transfer negotiation data */ +typedef struct _sync_data { + unsigned int SyncNegotiation; +#define SYNC_NOT_YET 0 +#define SYNC_OK 1 +#define SYNC_NG 2 + + unsigned int SyncPeriod; + unsigned int SyncOffset; + unsigned char SyncRegister; + unsigned char AckWidth; +} sync_data; + +typedef struct _nsp_hw_data { + unsigned int BaseAddress; + unsigned int NumAddress; + unsigned int IrqNumber; + + unsigned long MmioAddress; +#define NSP_MMIO_OFFSET 0x0800 + unsigned long MmioLength; + + unsigned char ScsiClockDiv; + + unsigned char TransferMode; + + int TimerCount; + int SelectionTimeOut; + struct scsi_cmnd *CurrentSC; + //int CurrnetTarget; + + int FifoCount; + +#define MSGBUF_SIZE 20 + unsigned char MsgBuffer[MSGBUF_SIZE]; + int MsgLen; + +#define N_TARGET 8 + sync_data Sync[N_TARGET]; + + char nspinfo[110]; /* description */ + spinlock_t Lock; + + scsi_info_t *ScsiInfo; /* attach <-> detect glue */ + + +#ifdef NSP_DEBUG + int CmdId; /* Accepted command serial number. + Used for debugging. */ +#endif +} nsp_hw_data; + +/**************************************************************************** + * + */ + +/* Card service functions */ +static void nsp_cs_detach (struct pcmcia_device *p_dev); +static void nsp_cs_release(struct pcmcia_device *link); +static int nsp_cs_config (struct pcmcia_device *link); + +/* Linux SCSI subsystem specific functions */ +static struct Scsi_Host *nsp_detect (struct scsi_host_template *sht); +static const char *nsp_info (struct Scsi_Host *shpnt); +static int nsp_show_info (struct seq_file *m, + struct Scsi_Host *host); +static int nsp_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *SCpnt); + +/* Error handler */ +/*static int nsp_eh_abort (struct scsi_cmnd *SCpnt);*/ +/*static int nsp_eh_device_reset(struct scsi_cmnd *SCpnt);*/ +static int nsp_eh_bus_reset (struct scsi_cmnd *SCpnt); +static int nsp_eh_host_reset (struct scsi_cmnd *SCpnt); +static int nsp_bus_reset (nsp_hw_data *data); + +/* */ +static int nsphw_init (nsp_hw_data *data); +static int nsphw_start_selection(struct scsi_cmnd *SCpnt); +static void nsp_start_timer (struct scsi_cmnd *SCpnt, int time); +static int nsp_fifo_count (struct scsi_cmnd *SCpnt); +static void nsp_pio_read (struct scsi_cmnd *SCpnt); +static void nsp_pio_write (struct scsi_cmnd *SCpnt); +static int nsp_nexus (struct scsi_cmnd *SCpnt); +static void nsp_scsi_done (struct scsi_cmnd *SCpnt); +static int nsp_analyze_sdtr (struct scsi_cmnd *SCpnt); +static int nsp_negate_signal (struct scsi_cmnd *SCpnt, + unsigned char mask, char *str); +static int nsp_expect_signal (struct scsi_cmnd *SCpnt, + unsigned char current_phase, + unsigned char mask); +static int nsp_xfer (struct scsi_cmnd *SCpnt, int phase); +static int nsp_dataphase_bypass (struct scsi_cmnd *SCpnt); +static int nsp_reselected (struct scsi_cmnd *SCpnt); +static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht); + +/* Interrupt handler */ +//static irqreturn_t nspintr(int irq, void *dev_id); + +/* Module entry point*/ +static int __init nsp_cs_init(void); +static void __exit nsp_cs_exit(void); + +/* Debug */ +#ifdef NSP_DEBUG +static void show_command (struct scsi_cmnd *SCpnt); +static void show_phase (struct scsi_cmnd *SCpnt); +static void show_busphase(unsigned char stat); +static void show_message (nsp_hw_data *data); +#else +# define show_command(ptr) /* */ +# define show_phase(SCpnt) /* */ +# define show_busphase(stat) /* */ +# define show_message(data) /* */ +#endif + +/* + * SCSI phase + */ +enum _scsi_phase { + PH_UNDETERMINED , + PH_ARBSTART , + PH_SELSTART , + PH_SELECTED , + PH_COMMAND , + PH_DATA , + PH_STATUS , + PH_MSG_IN , + PH_MSG_OUT , + PH_DISCONNECT , + PH_RESELECT , + PH_ABORT , + PH_RESET +}; + +enum _data_in_out { + IO_UNKNOWN, + IO_IN, + IO_OUT +}; + +enum _burst_mode { + BURST_IO8 = 0, + BURST_IO32 = 1, + BURST_MEM32 = 2, +}; + +/************************************************************************** + * SCSI messaage + */ +#define MSG_COMMAND_COMPLETE 0x00 +#define MSG_EXTENDED 0x01 +#define MSG_ABORT 0x06 +#define MSG_NO_OPERATION 0x08 +#define MSG_BUS_DEVICE_RESET 0x0c + +#define MSG_EXT_SDTR 0x01 + +/* scatter-gather table */ +# define BUFFER_ADDR ((char *)((sg_virt(SCpnt->SCp.buffer)))) + +#endif /*__nsp_cs__*/ +/* end */ |