diff options
Diffstat (limited to 'drivers/scsi/script_asm.pl')
| -rw-r--r-- | drivers/scsi/script_asm.pl | 984 |
1 files changed, 984 insertions, 0 deletions
diff --git a/drivers/scsi/script_asm.pl b/drivers/scsi/script_asm.pl new file mode 100644 index 000000000..7d651d99a --- /dev/null +++ b/drivers/scsi/script_asm.pl @@ -0,0 +1,984 @@ +#!/usr/bin/perl -s + +# NCR 53c810 script assembler +# Sponsored by +# iX Multiuser Multitasking Magazine +# +# Copyright 1993, Drew Eckhardt +# Visionary Computing +# (Unix and Linux consulting and custom programming) +# drew@Colorado.EDU +# +1 (303) 786-7975 +# +# Support for 53c710 (via -ncr7x0_family switch) added by Richard +# Hirst <richard@sleepie.demon.co.uk> - 15th March 1997 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# +# TolerANT and SCSI SCRIPTS are registered trademarks of NCR Corporation. +# + +# +# Basically, I follow the NCR syntax documented in the NCR53c710 +# Programmer's guide, with the new instructions, registers, etc. +# from the NCR53c810. +# +# Differences between this assembler and NCR's are that +# 1. PASS, REL (data, JUMPs work fine), and the option to start a new +# script, are unimplemented, since I didn't use them in my scripts. +# +# 2. I also emit a script_u.h file, which will undefine all of +# the A_*, E_*, etc. symbols defined in the script. This +# makes including multiple scripts in one program easier +# +# 3. This is a single pass assembler, which only emits +# .h files. +# + + +# XXX - set these with command line options +$debug = 0; # Print general debugging messages +$debug_external = 0; # Print external/forward reference messages +$list_in_array = 1; # Emit original SCRIPTS assembler in comments in + # script.h +#$prefix; # (set by perl -s) + # define all arrays having this prefix so we + # don't have name space collisions after + # assembling this file in different ways for + # different host adapters + +# Constants + + +# Table of the SCSI phase encodings +%scsi_phases = ( + 'DATA_OUT', 0x00_00_00_00, 'DATA_IN', 0x01_00_00_00, 'CMD', 0x02_00_00_00, + 'STATUS', 0x03_00_00_00, 'MSG_OUT', 0x06_00_00_00, 'MSG_IN', 0x07_00_00_00 +); + +# XXX - replace references to the *_810 constants with general constants +# assigned at compile time based on chip type. + +# Table of operator encodings +# XXX - NCR53c710 only implements +# move (nop) = 0x00_00_00_00 +# or = 0x02_00_00_00 +# and = 0x04_00_00_00 +# add = 0x06_00_00_00 + +if ($ncr7x0_family) { + %operators = ( + '|', 0x02_00_00_00, 'OR', 0x02_00_00_00, + '&', 0x04_00_00_00, 'AND', 0x04_00_00_00, + '+', 0x06_00_00_00 + ); +} +else { + %operators = ( + 'SHL', 0x01_00_00_00, + '|', 0x02_00_00_00, 'OR', 0x02_00_00_00, + 'XOR', 0x03_00_00_00, + '&', 0x04_00_00_00, 'AND', 0x04_00_00_00, + 'SHR', 0x05_00_00_00, + # Note : low bit of the operator bit should be set for add with + # carry. + '+', 0x06_00_00_00 + ); +} + +# Table of register addresses + +if ($ncr7x0_family) { + %registers = ( + 'SCNTL0', 0, 'SCNTL1', 1, 'SDID', 2, 'SIEN', 3, + 'SCID', 4, 'SXFER', 5, 'SODL', 6, 'SOCL', 7, + 'SFBR', 8, 'SIDL', 9, 'SBDL', 10, 'SBCL', 11, + 'DSTAT', 12, 'SSTAT0', 13, 'SSTAT1', 14, 'SSTAT2', 15, + 'DSA0', 16, 'DSA1', 17, 'DSA2', 18, 'DSA3', 19, + 'CTEST0', 20, 'CTEST1', 21, 'CTEST2', 22, 'CTEST3', 23, + 'CTEST4', 24, 'CTEST5', 25, 'CTEST6', 26, 'CTEST7', 27, + 'TEMP0', 28, 'TEMP1', 29, 'TEMP2', 30, 'TEMP3', 31, + 'DFIFO', 32, 'ISTAT', 33, 'CTEST8', 34, 'LCRC', 35, + 'DBC0', 36, 'DBC1', 37, 'DBC2', 38, 'DCMD', 39, + 'DNAD0', 40, 'DNAD1', 41, 'DNAD2', 42, 'DNAD3', 43, + 'DSP0', 44, 'DSP1', 45, 'DSP2', 46, 'DSP3', 47, + 'DSPS0', 48, 'DSPS1', 49, 'DSPS2', 50, 'DSPS3', 51, + 'SCRATCH0', 52, 'SCRATCH1', 53, 'SCRATCH2', 54, 'SCRATCH3', 55, + 'DMODE', 56, 'DIEN', 57, 'DWT', 58, 'DCNTL', 59, + 'ADDER0', 60, 'ADDER1', 61, 'ADDER2', 62, 'ADDER3', 63, + ); +} +else { + %registers = ( + 'SCNTL0', 0, 'SCNTL1', 1, 'SCNTL2', 2, 'SCNTL3', 3, + 'SCID', 4, 'SXFER', 5, 'SDID', 6, 'GPREG', 7, + 'SFBR', 8, 'SOCL', 9, 'SSID', 10, 'SBCL', 11, + 'DSTAT', 12, 'SSTAT0', 13, 'SSTAT1', 14, 'SSTAT2', 15, + 'DSA0', 16, 'DSA1', 17, 'DSA2', 18, 'DSA3', 19, + 'ISTAT', 20, + 'CTEST0', 24, 'CTEST1', 25, 'CTEST2', 26, 'CTEST3', 27, + 'TEMP0', 28, 'TEMP1', 29, 'TEMP2', 30, 'TEMP3', 31, + 'DFIFO', 32, 'CTEST4', 33, 'CTEST5', 34, 'CTEST6', 35, + 'DBC0', 36, 'DBC1', 37, 'DBC2', 38, 'DCMD', 39, + 'DNAD0', 40, 'DNAD1', 41, 'DNAD2', 42, 'DNAD3', 43, + 'DSP0', 44, 'DSP1', 45, 'DSP2', 46, 'DSP3', 47, + 'DSPS0', 48, 'DSPS1', 49, 'DSPS2', 50, 'DSPS3', 51, + 'SCRATCH0', 52, 'SCRATCH1', 53, 'SCRATCH2', 54, 'SCRATCH3', 55, + 'SCRATCHA0', 52, 'SCRATCHA1', 53, 'SCRATCHA2', 54, 'SCRATCHA3', 55, + 'DMODE', 56, 'DIEN', 57, 'DWT', 58, 'DCNTL', 59, + 'ADDER0', 60, 'ADDER1', 61, 'ADDER2', 62, 'ADDER3', 63, + 'SIEN0', 64, 'SIEN1', 65, 'SIST0', 66, 'SIST1', 67, + 'SLPAR', 68, 'MACNTL', 70, 'GPCNTL', 71, + 'STIME0', 72, 'STIME1', 73, 'RESPID', 74, + 'STEST0', 76, 'STEST1', 77, 'STEST2', 78, 'STEST3', 79, + 'SIDL', 80, + 'SODL', 84, + 'SBDL', 88, + 'SCRATCHB0', 92, 'SCRATCHB1', 93, 'SCRATCHB2', 94, 'SCRATCHB3', 95 + ); +} + +# Parsing regular expressions +$identifier = '[A-Za-z_][A-Za-z_0-9]*'; +$decnum = '-?\\d+'; +$hexnum = '0[xX][0-9A-Fa-f]+'; +$constant = "$hexnum|$decnum"; + +# yucky - since we can't control grouping of # $constant, we need to +# expand out each alternative for $value. + +$value = "$identifier|$identifier\\s*[+\-]\\s*$decnum|". + "$identifier\\s*[+-]\s*$hexnum|$constant"; + +print STDERR "value regex = $value\n" if ($debug); + +$phase = join ('|', keys %scsi_phases); +print STDERR "phase regex = $phase\n" if ($debug); +$register = join ('|', keys %registers); + +# yucky - since %operators includes meta-characters which must +# be escaped, I can't use the join() trick I used for the register +# regex + +if ($ncr7x0_family) { + $operator = '\||OR|AND|\&|\+'; +} +else { + $operator = '\||OR|AND|XOR|\&|\+'; +} + +# Global variables + +%symbol_values = (%registers) ; # Traditional symbol table + +%symbol_references = () ; # Table of symbol references, where + # the index is the symbol name, + # and the contents a white space + # delimited list of address,size + # tuples where size is in bytes. + +@code = (); # Array of 32 bit words for SIOP + +@entry = (); # Array of entry point names + +@label = (); # Array of label names + +@absolute = (); # Array of absolute names + +@relative = (); # Array of relative names + +@external = (); # Array of external names + +$address = 0; # Address of current instruction + +$lineno = 0; # Line number we are parsing + +$output = 'script.h'; # Output file +$outputu = 'scriptu.h'; + +# &patch ($address, $offset, $length, $value) patches $code[$address] +# so that the $length bytes at $offset have $value added to +# them. + +@inverted_masks = (0x00_00_00_00, 0x00_00_00_ff, 0x00_00_ff_ff, 0x00_ff_ff_ff, + 0xff_ff_ff_ff); + +sub patch { + local ($address, $offset, $length, $value) = @_; + if ($debug) { + print STDERR "Patching $address at offset $offset, length $length to $value\n"; + printf STDERR "Old code : %08x\n", $code[$address]; + } + + $mask = ($inverted_masks[$length] << ($offset * 8)); + + $code[$address] = ($code[$address] & ~$mask) | + (($code[$address] & $mask) + ($value << ($offset * 8)) & + $mask); + + printf STDERR "New code : %08x\n", $code[$address] if ($debug); +} + +# &parse_value($value, $word, $offset, $length) where $value is +# an identifier or constant, $word is the word offset relative to +# $address, $offset is the starting byte within that word, and +# $length is the length of the field in bytes. +# +# Side effects are that the bytes are combined into the @code array +# relative to $address, and that the %symbol_references table is +# updated as appropriate. + +sub parse_value { + local ($value, $word, $offset, $length) = @_; + local ($tmp); + + $symbol = ''; + + if ($value =~ /^REL\s*\(\s*($identifier)\s*\)\s*(.*)/i) { + $relative = 'REL'; + $symbol = $1; + $value = $2; +print STDERR "Relative reference $symbol\n" if ($debug); + } elsif ($value =~ /^($identifier)\s*(.*)/) { + $relative = 'ABS'; + $symbol = $1; + $value = $2; +print STDERR "Absolute reference $symbol\n" if ($debug); + } + + if ($symbol ne '') { +print STDERR "Referencing symbol $1, length = $length in $_\n" if ($debug); + $tmp = ($address + $word) * 4 + $offset; + if ($symbol_references{$symbol} ne undef) { + $symbol_references{$symbol} = + "$symbol_references{$symbol} $relative,$tmp,$length"; + } else { + if (!defined($symbol_values{$symbol})) { +print STDERR "forward $1\n" if ($debug_external); + $forward{$symbol} = "line $lineno : $_"; + } + $symbol_references{$symbol} = "$relative,$tmp,$length"; + } + } + + $value = eval $value; + &patch ($address + $word, $offset, $length, $value); +} + +# &parse_conditional ($conditional) where $conditional is the conditional +# clause from a transfer control instruction (RETURN, CALL, JUMP, INT). + +sub parse_conditional { + local ($conditional) = @_; + if ($conditional =~ /^\s*(IF|WHEN)\s*(.*)/i) { + $if = $1; + $conditional = $2; + if ($if =~ /WHEN/i) { + $allow_atn = 0; + $code[$address] |= 0x00_01_00_00; + $allow_atn = 0; + print STDERR "$0 : parsed WHEN\n" if ($debug); + } else { + $allow_atn = 1; + print STDERR "$0 : parsed IF\n" if ($debug); + } + } else { + die "$0 : syntax error in line $lineno : $_ + expected IF or WHEN +"; + } + + if ($conditional =~ /^NOT\s+(.*)$/i) { + $not = 'NOT '; + $other = 'OR'; + $conditional = $1; + print STDERR "$0 : parsed NOT\n" if ($debug); + } else { + $code[$address] |= 0x00_08_00_00; + $not = ''; + $other = 'AND' + } + + $need_data = 0; + if ($conditional =~ /^ATN\s*(.*)/i) {# + die "$0 : syntax error in line $lineno : $_ + WHEN conditional is incompatible with ATN +" if (!$allow_atn); + $code[$address] |= 0x00_02_00_00; + $conditional = $1; + print STDERR "$0 : parsed ATN\n" if ($debug); + } elsif ($conditional =~ /^($phase)\s*(.*)/i) { + $phase_index = "\U$1\E"; + $p = $scsi_phases{$phase_index}; + $code[$address] |= $p | 0x00_02_00_00; + $conditional = $2; + print STDERR "$0 : parsed phase $phase_index\n" if ($debug); + } else { + $other = ''; + $need_data = 1; + } + +print STDERR "Parsing conjunction, expecting $other\n" if ($debug); + if ($conditional =~ /^(AND|OR)\s*(.*)/i) { + $conjunction = $1; + $conditional = $2; + $need_data = 1; + die "$0 : syntax error in line $lineno : $_ + Illegal use of $1. Valid uses are + ".$not."<phase> $1 data + ".$not."ATN $1 data +" if ($other eq ''); + die "$0 : syntax error in line $lineno : $_ + Illegal use of $conjunction. Valid syntaxes are + NOT <phase>|ATN OR data + <phase>|ATN AND data +" if ($conjunction !~ /\s*$other\s*/i); + print STDERR "$0 : parsed $1\n" if ($debug); + } + + if ($need_data) { +print STDERR "looking for data in $conditional\n" if ($debug); + if ($conditional=~ /^($value)\s*(.*)/i) { + $code[$address] |= 0x00_04_00_00; + $conditional = $2; + &parse_value($1, 0, 0, 1); + print STDERR "$0 : parsed data\n" if ($debug); + } else { + die "$0 : syntax error in line $lineno : $_ + expected <data>. +"; + } + } + + if ($conditional =~ /^\s*,\s*(.*)/) { + $conditional = $1; + if ($conditional =~ /^AND\s\s*MASK\s\s*($value)\s*(.*)/i) { + &parse_value ($1, 0, 1, 1); + print STDERR "$0 parsed AND MASK $1\n" if ($debug); + die "$0 : syntax error in line $lineno : $_ + expected end of line, not \"$2\" +" if ($2 ne ''); + } else { + die "$0 : syntax error in line $lineno : $_ + expected \",AND MASK <data>\", not \"$2\" +"; + } + } elsif ($conditional !~ /^\s*$/) { + die "$0 : syntax error in line $lineno : $_ + expected end of line" . (($need_data) ? " or \"AND MASK <data>\"" : "") . " + not \"$conditional\" +"; + } +} + +# Parse command line +$output = shift; +$outputu = shift; + + +# Main loop +while (<STDIN>) { + $lineno = $lineno + 1; + $list[$address] = $list[$address].$_; + s/;.*$//; # Strip comments + + + chop; # Leave new line out of error messages + +# Handle symbol definitions of the form label: + if (/^\s*($identifier)\s*:(.*)/) { + if (!defined($symbol_values{$1})) { + $symbol_values{$1} = $address * 4; # Address is an index into + delete $forward{$1}; # an array of longs + push (@label, $1); + $_ = $2; + } else { + die "$0 : redefinition of symbol $1 in line $lineno : $_\n"; + } + } + +# Handle symbol definitions of the form ABSOLUTE or RELATIVE identifier = +# value + if (/^\s*(ABSOLUTE|RELATIVE)\s+(.*)/i) { + $is_absolute = $1; + $rest = $2; + foreach $rest (split (/\s*,\s*/, $rest)) { + if ($rest =~ /^($identifier)\s*=\s*($constant)\s*$/) { + local ($id, $cnst) = ($1, $2); + if ($symbol_values{$id} eq undef) { + $symbol_values{$id} = eval $cnst; + delete $forward{$id}; + if ($is_absolute =~ /ABSOLUTE/i) { + push (@absolute , $id); + } else { + push (@relative, $id); + } + } else { + die "$0 : redefinition of symbol $id in line $lineno : $_\n"; + } + } else { + die +"$0 : syntax error in line $lineno : $_ + expected <identifier> = <value> +"; + } + } + } elsif (/^\s*EXTERNAL\s+(.*)/i) { + $externals = $1; + foreach $external (split (/,/,$externals)) { + if ($external =~ /\s*($identifier)\s*$/) { + $external = $1; + push (@external, $external); + delete $forward{$external}; + if (defined($symbol_values{$external})) { + die "$0 : redefinition of symbol $1 in line $lineno : $_\n"; + } + $symbol_values{$external} = $external; +print STDERR "defined external $1 to $external\n" if ($debug_external); + } else { + die +"$0 : syntax error in line $lineno : $_ + expected <identifier>, got $external +"; + } + } +# Process ENTRY identifier declarations + } elsif (/^\s*ENTRY\s+(.*)/i) { + if ($1 =~ /^($identifier)\s*$/) { + push (@entry, $1); + } else { + die +"$0 : syntax error in line $lineno : $_ + expected ENTRY <identifier> +"; + } +# Process MOVE length, address, WITH|WHEN phase instruction + } elsif (/^\s*MOVE\s+(.*)/i) { + $rest = $1; + if ($rest =~ /^FROM\s+($value)\s*,\s*(WITH|WHEN)\s+($phase)\s*$/i) { + $transfer_addr = $1; + $with_when = $2; + $scsi_phase = $3; +print STDERR "Parsing MOVE FROM $transfer_addr, $with_when $3\n" if ($debug); + $code[$address] = 0x18_00_00_00 | (($with_when =~ /WITH/i) ? + 0x00_00_00_00 : 0x08_00_00_00) | $scsi_phases{$scsi_phase}; + &parse_value ($transfer_addr, 1, 0, 4); + $address += 2; + } elsif ($rest =~ /^($value)\s*,\s*(PTR\s+|)($value)\s*,\s*(WITH|WHEN)\s+($phase)\s*$/i) { + $transfer_len = $1; + $ptr = $2; + $transfer_addr = $3; + $with_when = $4; + $scsi_phase = $5; + $code[$address] = (($with_when =~ /WITH/i) ? 0x00_00_00_00 : + 0x08_00_00_00) | (($ptr =~ /PTR/i) ? (1 << 29) : 0) | + $scsi_phases{$scsi_phase}; + &parse_value ($transfer_len, 0, 0, 3); + &parse_value ($transfer_addr, 1, 0, 4); + $address += 2; + } elsif ($rest =~ /^MEMORY\s+(.*)/i) { + $rest = $1; + $code[$address] = 0xc0_00_00_00; + if ($rest =~ /^($value)\s*,\s*($value)\s*,\s*($value)\s*$/) { + $count = $1; + $source = $2; + $dest = $3; +print STDERR "Parsing MOVE MEMORY $count, $source, $dest\n" if ($debug); + &parse_value ($count, 0, 0, 3); + &parse_value ($source, 1, 0, 4); + &parse_value ($dest, 2, 0, 4); +printf STDERR "Move memory instruction = %08x,%08x,%08x\n", + $code[$address], $code[$address+1], $code[$address +2] if + ($debug); + $address += 3; + + } else { + die +"$0 : syntax error in line $lineno : $_ + expected <count>, <source>, <destination> +" + } + } elsif ($1 =~ /^(.*)\s+(TO|SHL|SHR)\s+(.*)/i) { +print STDERR "Parsing register to register move\n" if ($debug); + $src = $1; + $op = "\U$2\E"; + $rest = $3; + + $code[$address] = 0x40_00_00_00; + + $force = ($op !~ /TO/i); + + +print STDERR "Forcing register source \n" if ($force && $debug); + + if (!$force && $src =~ + /^($register)\s+(-|$operator)\s+($value)\s*$/i) { +print STDERR "register operand data8 source\n" if ($debug); + $src_reg = "\U$1\E"; + $op = "\U$2\E"; + if ($op ne '-') { + $data8 = $3; + } else { + die "- is not implemented yet.\n" + } + } elsif ($src =~ /^($register)\s*$/i) { +print STDERR "register source\n" if ($debug); + $src_reg = "\U$1\E"; + # Encode register to register move as a register | 0 + # move to register. + if (!$force) { + $op = '|'; + } + $data8 = 0; + } elsif (!$force && $src =~ /^($value)\s*$/i) { +print STDERR "data8 source\n" if ($debug); + $src_reg = undef; + $op = 'NONE'; + $data8 = $1; + } else { + if (!$force) { + die +"$0 : syntax error in line $lineno : $_ + expected <register> + <data8> + <register> <operand> <data8> +"; + } else { + die +"$0 : syntax error in line $lineno : $_ + expected <register> +"; + } + } + if ($rest =~ /^($register)\s*(.*)$/i) { + $dst_reg = "\U$1\E"; + $rest = $2; + } else { + die +"$0 : syntax error in $lineno : $_ + expected <register>, got $rest +"; + } + + if ($rest =~ /^WITH\s+CARRY\s*(.*)/i) { + $rest = $1; + if ($op eq '+') { + $code[$address] |= 0x01_00_00_00; + } else { + die +"$0 : syntax error in $lineno : $_ + WITH CARRY option is incompatible with the $op operator. +"; + } + } + + if ($rest !~ /^\s*$/) { + die +"$0 : syntax error in $lineno : $_ + Expected end of line, got $rest +"; + } + + print STDERR "source = $src_reg, data = $data8 , destination = $dst_reg\n" + if ($debug); + # Note that Move data8 to reg is encoded as a read-modify-write + # instruction. + if (($src_reg eq undef) || ($src_reg eq $dst_reg)) { + $code[$address] |= 0x38_00_00_00 | + ($registers{$dst_reg} << 16); + } elsif ($dst_reg =~ /SFBR/i) { + $code[$address] |= 0x30_00_00_00 | + ($registers{$src_reg} << 16); + } elsif ($src_reg =~ /SFBR/i) { + $code[$address] |= 0x28_00_00_00 | + ($registers{$dst_reg} << 16); + } else { + die +"$0 : Illegal combination of registers in line $lineno : $_ + Either source and destination registers must be the same, + or either source or destination register must be SFBR. +"; + } + + $code[$address] |= $operators{$op}; + + &parse_value ($data8, 0, 1, 1); + $code[$address] |= $operators{$op}; + $code[$address + 1] = 0x00_00_00_00;# Reserved + $address += 2; + } else { + die +"$0 : syntax error in line $lineno : $_ + expected (initiator) <length>, <address>, WHEN <phase> + (target) <length>, <address>, WITH <phase> + MEMORY <length>, <source>, <destination> + <expression> TO <register> +"; + } +# Process SELECT {ATN|} id, fail_address + } elsif (/^\s*(SELECT|RESELECT)\s+(.*)/i) { + $rest = $2; + if ($rest =~ /^(ATN|)\s*($value)\s*,\s*($identifier)\s*$/i) { + $atn = $1; + $id = $2; + $alt_addr = $3; + $code[$address] = 0x40_00_00_00 | + (($atn =~ /ATN/i) ? 0x01_00_00_00 : 0); + $code[$address + 1] = 0x00_00_00_00; + &parse_value($id, 0, 2, 1); + &parse_value($alt_addr, 1, 0, 4); + $address += 2; + } elsif ($rest =~ /^(ATN|)\s*FROM\s+($value)\s*,\s*($identifier)\s*$/i) { + $atn = $1; + $addr = $2; + $alt_addr = $3; + $code[$address] = 0x42_00_00_00 | + (($atn =~ /ATN/i) ? 0x01_00_00_00 : 0); + $code[$address + 1] = 0x00_00_00_00; + &parse_value($addr, 0, 0, 3); + &parse_value($alt_addr, 1, 0, 4); + $address += 2; + } else { + die +"$0 : syntax error in line $lineno : $_ + expected SELECT id, alternate_address or + SELECT FROM address, alternate_address or + RESELECT id, alternate_address or + RESELECT FROM address, alternate_address +"; + } + } elsif (/^\s*WAIT\s+(.*)/i) { + $rest = $1; +print STDERR "Parsing WAIT $rest\n" if ($debug); + if ($rest =~ /^DISCONNECT\s*$/i) { + $code[$address] = 0x48_00_00_00; + $code[$address + 1] = 0x00_00_00_00; + $address += 2; + } elsif ($rest =~ /^(RESELECT|SELECT)\s+($identifier)\s*$/i) { + $alt_addr = $2; + $code[$address] = 0x50_00_00_00; + &parse_value ($alt_addr, 1, 0, 4); + $address += 2; + } else { + die +"$0 : syntax error in line $lineno : $_ + expected (initiator) WAIT DISCONNECT or + (initiator) WAIT RESELECT alternate_address or + (target) WAIT SELECT alternate_address +"; + } +# Handle SET and CLEAR instructions. Note that we should also do something +# with this syntax to set target mode. + } elsif (/^\s*(SET|CLEAR)\s+(.*)/i) { + $set = $1; + $list = $2; + $code[$address] = ($set =~ /SET/i) ? 0x58_00_00_00 : + 0x60_00_00_00; + foreach $arg (split (/\s+AND\s+/i,$list)) { + if ($arg =~ /ATN/i) { + $code[$address] |= 0x00_00_00_08; + } elsif ($arg =~ /ACK/i) { + $code[$address] |= 0x00_00_00_40; + } elsif ($arg =~ /TARGET/i) { + $code[$address] |= 0x00_00_02_00; + } elsif ($arg =~ /CARRY/i) { + $code[$address] |= 0x00_00_04_00; + } else { + die +"$0 : syntax error in line $lineno : $_ + expected $set followed by a AND delimited list of one or + more strings from the list ACK, ATN, CARRY, TARGET. +"; + } + } + $code[$address + 1] = 0x00_00_00_00; + $address += 2; + } elsif (/^\s*(JUMP|CALL|INT)\s+(.*)/i) { + $instruction = $1; + $rest = $2; + if ($instruction =~ /JUMP/i) { + $code[$address] = 0x80_00_00_00; + } elsif ($instruction =~ /CALL/i) { + $code[$address] = 0x88_00_00_00; + } else { + $code[$address] = 0x98_00_00_00; + } +print STDERR "parsing JUMP, rest = $rest\n" if ($debug); + +# Relative jump. + if ($rest =~ /^(REL\s*\(\s*$identifier\s*\))\s*(.*)/i) { + $addr = $1; + $rest = $2; +print STDERR "parsing JUMP REL, addr = $addr, rest = $rest\n" if ($debug); + $code[$address] |= 0x00_80_00_00; + &parse_value($addr, 1, 0, 4); +# Absolute jump, requires no more gunk + } elsif ($rest =~ /^($value)\s*(.*)/) { + $addr = $1; + $rest = $2; + &parse_value($addr, 1, 0, 4); + } else { + die +"$0 : syntax error in line $lineno : $_ + expected <address> or REL (address) +"; + } + + if ($rest =~ /^,\s*(.*)/) { + &parse_conditional($1); + } elsif ($rest =~ /^\s*$/) { + $code[$address] |= (1 << 19); + } else { + die +"$0 : syntax error in line $lineno : $_ + expected , <conditional> or end of line, got $1 +"; + } + + $address += 2; + } elsif (/^\s*(RETURN|INTFLY)\s*(.*)/i) { + $instruction = $1; + $conditional = $2; +print STDERR "Parsing $instruction\n" if ($debug); + $code[$address] = ($instruction =~ /RETURN/i) ? 0x90_00_00_00 : + 0x98_10_00_00; + if ($conditional =~ /^,\s*(.*)/) { + $conditional = $1; + &parse_conditional ($conditional); + } elsif ($conditional !~ /^\s*$/) { + die +"$0 : syntax error in line $lineno : $_ + expected , <conditional> +"; + } else { + $code[$address] |= 0x00_08_00_00; + } + + $code[$address + 1] = 0x00_00_00_00; + $address += 2; + } elsif (/^\s*DISCONNECT\s*$/) { + $code[$address] = 0x48_00_00_00; + $code[$address + 1] = 0x00_00_00_00; + $address += 2; +# I'm not sure that I should be including this extension, but +# what the hell? + } elsif (/^\s*NOP\s*$/i) { + $code[$address] = 0x80_88_00_00; + $code[$address + 1] = 0x00_00_00_00; + $address += 2; +# Ignore lines consisting entirely of white space + } elsif (/^\s*$/) { + } else { + die +"$0 : syntax error in line $lineno: $_ + expected label:, ABSOLUTE, CLEAR, DISCONNECT, EXTERNAL, MOVE, RESELECT, + SELECT SET, or WAIT +"; + } +} + +# Fill in label references + +@undefined = keys %forward; +if ($#undefined >= 0) { + print STDERR "Undefined symbols : \n"; + foreach $undef (@undefined) { + print STDERR "$undef in $forward{$undef}\n"; + } + exit 1; +} + +@label_patches = (); + +@external_patches = (); + +@absolute = sort @absolute; + +foreach $i (@absolute) { + foreach $j (split (/\s+/,$symbol_references{$i})) { + $j =~ /(REL|ABS),(.*),(.*)/; + $type = $1; + $address = $2; + $length = $3; + die +"$0 : $symbol $i has invalid relative reference at address $address, + size $length\n" + if ($type eq 'REL'); + + &patch ($address / 4, $address % 4, $length, $symbol_values{$i}); + } +} + +foreach $external (@external) { +print STDERR "checking external $external \n" if ($debug_external); + if ($symbol_references{$external} ne undef) { + for $reference (split(/\s+/,$symbol_references{$external})) { + $reference =~ /(REL|ABS),(.*),(.*)/; + $type = $1; + $address = $2; + $length = $3; + + die +"$0 : symbol $label is external, has invalid relative reference at $address, + size $length\n" + if ($type eq 'REL'); + + die +"$0 : symbol $label has invalid reference at $address, size $length\n" + if ((($address % 4) !=0) || ($length != 4)); + + $symbol = $symbol_values{$external}; + $add = $code[$address / 4]; + if ($add eq 0) { + $code[$address / 4] = $symbol; + } else { + $add = sprintf ("0x%08x", $add); + $code[$address / 4] = "$symbol + $add"; + } + +print STDERR "referenced external $external at $1\n" if ($debug_external); + } + } +} + +foreach $label (@label) { + if ($symbol_references{$label} ne undef) { + for $reference (split(/\s+/,$symbol_references{$label})) { + $reference =~ /(REL|ABS),(.*),(.*)/; + $type = $1; + $address = $2; + $length = $3; + + if ((($address % 4) !=0) || ($length != 4)) { + die "$0 : symbol $label has invalid reference at $1, size $2\n"; + } + + if ($type eq 'ABS') { + $code[$address / 4] += $symbol_values{$label}; + push (@label_patches, $address / 4); + } else { +# +# - The address of the reference should be in the second and last word +# of an instruction +# - Relative jumps, etc. are relative to the DSP of the _next_ instruction +# +# So, we need to add four to the address of the reference, to get +# the address of the next instruction, when computing the reference. + + $tmp = $symbol_values{$label} - + ($address + 4); + die +# Relative addressing is limited to 24 bits. +"$0 : symbol $label is too far ($tmp) from $address to reference as + relative/\n" if (($tmp >= 0x80_00_00) || ($tmp < -0x80_00_00)); + $code[$address / 4] = $tmp & 0x00_ff_ff_ff; + } + } + } +} + +# Output SCRIPT[] array, one instruction per line. Optionally +# print the original code too. + +open (OUTPUT, ">$output") || die "$0 : can't open $output for writing\n"; +open (OUTPUTU, ">$outputu") || die "$0 : can't open $outputu for writing\n"; + +($_ = $0) =~ s:.*/::; +print OUTPUT "/* DO NOT EDIT - Generated automatically by ".$_." */\n"; +print OUTPUT "static u32 ".$prefix."SCRIPT[] = {\n"; +$instructions = 0; +for ($i = 0; $i < $#code; ) { + if ($list_in_array) { + printf OUTPUT "/*\n$list[$i]\nat 0x%08x : */", $i; + } + printf OUTPUT "\t0x%08x,", $code[$i]; + printf STDERR "Address $i = %x\n", $code[$i] if ($debug); + if ($code[$i + 1] =~ /\s*($identifier)(.*)$/) { + push (@external_patches, $i+1, $1); + printf OUTPUT "0%s,", $2 + } else { + printf OUTPUT "0x%08x,",$code[$i+1]; + } + + if (($code[$i] & 0xff_00_00_00) == 0xc0_00_00_00) { + if ($code[$i + 2] =~ /$identifier/) { + push (@external_patches, $i+2, $code[$i+2]); + printf OUTPUT "0,\n"; + } else { + printf OUTPUT "0x%08x,\n",$code[$i+2]; + } + $i += 3; + } else { + printf OUTPUT "\n"; + $i += 2; + } + $instructions += 1; +} +print OUTPUT "};\n\n"; + +foreach $i (@absolute) { + printf OUTPUT "#define A_$i\t0x%08x\n", $symbol_values{$i}; + if (defined($prefix) && $prefix ne '') { + printf OUTPUT "#define A_".$i."_used ".$prefix."A_".$i."_used\n"; + printf OUTPUTU "#undef A_".$i."_used\n"; + } + printf OUTPUTU "#undef A_$i\n"; + + printf OUTPUT "static u32 A_".$i."_used\[\] __attribute((unused)) = {\n"; +printf STDERR "$i is used $symbol_references{$i}\n" if ($debug); + foreach $j (split (/\s+/,$symbol_references{$i})) { + $j =~ /(ABS|REL),(.*),(.*)/; + if ($1 eq 'ABS') { + $address = $2; + $length = $3; + printf OUTPUT "\t0x%08x,\n", $address / 4; + } + } + printf OUTPUT "};\n\n"; +} + +foreach $i (sort @entry) { + printf OUTPUT "#define Ent_$i\t0x%08x\n", $symbol_values{$i}; + printf OUTPUTU "#undef Ent_$i\n", $symbol_values{$i}; +} + +# +# NCR assembler outputs label patches in the form of indices into +# the code. +# +printf OUTPUT "static u32 ".$prefix."LABELPATCHES[] __attribute((unused)) = {\n"; +for $patch (sort {$a <=> $b} @label_patches) { + printf OUTPUT "\t0x%08x,\n", $patch; +} +printf OUTPUT "};\n\n"; + +$num_external_patches = 0; +printf OUTPUT "static struct {\n\tu32\toffset;\n\tvoid\t\t*address;\n". + "} ".$prefix."EXTERNAL_PATCHES[] __attribute((unused)) = {\n"; +while ($ident = pop(@external_patches)) { + $off = pop(@external_patches); + printf OUTPUT "\t{0x%08x, &%s},\n", $off, $ident; + ++$num_external_patches; +} +printf OUTPUT "};\n\n"; + +printf OUTPUT "static u32 ".$prefix."INSTRUCTIONS __attribute((unused))\t= %d;\n", + $instructions; +printf OUTPUT "static u32 ".$prefix."PATCHES __attribute((unused))\t= %d;\n", + $#label_patches+1; +printf OUTPUT "static u32 ".$prefix."EXTERNAL_PATCHES_LEN __attribute((unused))\t= %d;\n", + $num_external_patches; +close OUTPUT; +close OUTPUTU; |