summaryrefslogtreecommitdiff
path: root/drivers/soc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/soc')
-rw-r--r--drivers/soc/Kconfig3
-rw-r--r--drivers/soc/Makefile3
-rw-r--r--drivers/soc/bcm/Kconfig9
-rw-r--r--drivers/soc/bcm/Makefile1
-rw-r--r--drivers/soc/bcm/raspberrypi-power.c247
-rw-r--r--drivers/soc/dove/pmu.c43
-rw-r--r--drivers/soc/fsl/Makefile6
-rw-r--r--drivers/soc/fsl/qe/Kconfig38
-rw-r--r--drivers/soc/fsl/qe/Makefile10
-rw-r--r--drivers/soc/fsl/qe/gpio.c317
-rw-r--r--drivers/soc/fsl/qe/qe.c719
-rw-r--r--drivers/soc/fsl/qe/qe_common.c235
-rw-r--r--drivers/soc/fsl/qe/qe_ic.c503
-rw-r--r--drivers/soc/fsl/qe/qe_ic.h103
-rw-r--r--drivers/soc/fsl/qe/qe_io.c192
-rw-r--r--drivers/soc/fsl/qe/ucc.c212
-rw-r--r--drivers/soc/fsl/qe/ucc_fast.c363
-rw-r--r--drivers/soc/fsl/qe/ucc_slow.c374
-rw-r--r--drivers/soc/fsl/qe/usb.c56
-rw-r--r--drivers/soc/mediatek/mtk-scpsys.c32
-rw-r--r--drivers/soc/qcom/Kconfig27
-rw-r--r--drivers/soc/qcom/Makefile4
-rw-r--r--drivers/soc/qcom/smd-rpm.c2
-rw-r--r--drivers/soc/qcom/smd.c13
-rw-r--r--drivers/soc/qcom/smem_state.c201
-rw-r--r--drivers/soc/qcom/smp2p.c578
-rw-r--r--drivers/soc/qcom/smsm.c625
-rw-r--r--drivers/soc/qcom/spm.c12
-rw-r--r--drivers/soc/qcom/wcnss_ctrl.c272
-rw-r--r--drivers/soc/tegra/Kconfig83
-rw-r--r--drivers/soc/ti/Kconfig10
-rw-r--r--drivers/soc/ti/Makefile1
-rw-r--r--drivers/soc/ti/knav_dma.c2
-rw-r--r--drivers/soc/ti/wkup_m3_ipc.c508
-rw-r--r--drivers/soc/versatile/soc-realview.c4
35 files changed, 5789 insertions, 19 deletions
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 4e853ed2c..88260205a 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,10 +1,13 @@
menu "SOC (System On Chip) specific Drivers"
+source "drivers/soc/bcm/Kconfig"
source "drivers/soc/brcmstb/Kconfig"
+source "drivers/soc/fsl/qe/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/rockchip/Kconfig"
source "drivers/soc/sunxi/Kconfig"
+source "drivers/soc/tegra/Kconfig"
source "drivers/soc/ti/Kconfig"
source "drivers/soc/versatile/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index f2ba2e932..2afdc74f7 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -2,8 +2,11 @@
# Makefile for the Linux Kernel SOC specific device drivers.
#
+obj-y += bcm/
obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
+obj-$(CONFIG_ARCH_DOVE) += dove/
obj-$(CONFIG_MACH_DOVE) += dove/
+obj-y += fsl/
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_QCOM) += qcom/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig
new file mode 100644
index 000000000..3066edea1
--- /dev/null
+++ b/drivers/soc/bcm/Kconfig
@@ -0,0 +1,9 @@
+config RASPBERRYPI_POWER
+ bool "Raspberry Pi power domain driver"
+ depends on ARCH_BCM2835 || COMPILE_TEST
+ depends on RASPBERRYPI_FIRMWARE=y
+ select PM_GENERIC_DOMAINS if PM
+ select PM_GENERIC_DOMAINS_OF if PM
+ help
+ This enables support for the RPi power domains which can be enabled
+ or disabled via the RPi firmware.
diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile
new file mode 100644
index 000000000..63aa3eb23
--- /dev/null
+++ b/drivers/soc/bcm/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o
diff --git a/drivers/soc/bcm/raspberrypi-power.c b/drivers/soc/bcm/raspberrypi-power.c
new file mode 100644
index 000000000..fe96a8b95
--- /dev/null
+++ b/drivers/soc/bcm/raspberrypi-power.c
@@ -0,0 +1,247 @@
+/* (C) 2015 Pengutronix, Alexander Aring <aar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Authors:
+ * Alexander Aring <aar@pengutronix.de>
+ * Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <dt-bindings/power/raspberrypi-power.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+/*
+ * Firmware indices for the old power domains interface. Only a few
+ * of them were actually implemented.
+ */
+#define RPI_OLD_POWER_DOMAIN_USB 3
+#define RPI_OLD_POWER_DOMAIN_V3D 10
+
+struct rpi_power_domain {
+ u32 domain;
+ bool enabled;
+ bool old_interface;
+ struct generic_pm_domain base;
+ struct rpi_firmware *fw;
+};
+
+struct rpi_power_domains {
+ bool has_new_interface;
+ struct genpd_onecell_data xlate;
+ struct rpi_firmware *fw;
+ struct rpi_power_domain domains[RPI_POWER_DOMAIN_COUNT];
+};
+
+/*
+ * Packet definition used by RPI_FIRMWARE_SET_POWER_STATE and
+ * RPI_FIRMWARE_SET_DOMAIN_STATE
+ */
+struct rpi_power_domain_packet {
+ u32 domain;
+ u32 on;
+} __packet;
+
+/*
+ * Asks the firmware to enable or disable power on a specific power
+ * domain.
+ */
+static int rpi_firmware_set_power(struct rpi_power_domain *rpi_domain, bool on)
+{
+ struct rpi_power_domain_packet packet;
+
+ packet.domain = rpi_domain->domain;
+ packet.on = on;
+ return rpi_firmware_property(rpi_domain->fw,
+ rpi_domain->old_interface ?
+ RPI_FIRMWARE_SET_POWER_STATE :
+ RPI_FIRMWARE_SET_DOMAIN_STATE,
+ &packet, sizeof(packet));
+}
+
+static int rpi_domain_off(struct generic_pm_domain *domain)
+{
+ struct rpi_power_domain *rpi_domain =
+ container_of(domain, struct rpi_power_domain, base);
+
+ return rpi_firmware_set_power(rpi_domain, false);
+}
+
+static int rpi_domain_on(struct generic_pm_domain *domain)
+{
+ struct rpi_power_domain *rpi_domain =
+ container_of(domain, struct rpi_power_domain, base);
+
+ return rpi_firmware_set_power(rpi_domain, true);
+}
+
+static void rpi_common_init_power_domain(struct rpi_power_domains *rpi_domains,
+ int xlate_index, const char *name)
+{
+ struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
+
+ dom->fw = rpi_domains->fw;
+
+ dom->base.name = name;
+ dom->base.power_on = rpi_domain_on;
+ dom->base.power_off = rpi_domain_off;
+
+ /*
+ * Treat all power domains as off at boot.
+ *
+ * The firmware itself may be keeping some domains on, but
+ * from Linux's perspective all we control is the refcounts
+ * that we give to the firmware, and we can't ask the firmware
+ * to turn off something that we haven't ourselves turned on.
+ */
+ pm_genpd_init(&dom->base, NULL, true);
+
+ rpi_domains->xlate.domains[xlate_index] = &dom->base;
+}
+
+static void rpi_init_power_domain(struct rpi_power_domains *rpi_domains,
+ int xlate_index, const char *name)
+{
+ struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
+
+ if (!rpi_domains->has_new_interface)
+ return;
+
+ /* The DT binding index is the firmware's domain index minus one. */
+ dom->domain = xlate_index + 1;
+
+ rpi_common_init_power_domain(rpi_domains, xlate_index, name);
+}
+
+static void rpi_init_old_power_domain(struct rpi_power_domains *rpi_domains,
+ int xlate_index, int domain,
+ const char *name)
+{
+ struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
+
+ dom->old_interface = true;
+ dom->domain = domain;
+
+ rpi_common_init_power_domain(rpi_domains, xlate_index, name);
+}
+
+/*
+ * Detects whether the firmware supports the new power domains interface.
+ *
+ * The firmware doesn't actually return an error on an unknown tag,
+ * and just skips over it, so we do the detection by putting an
+ * unexpected value in the return field and checking if it was
+ * unchanged.
+ */
+static bool
+rpi_has_new_domain_support(struct rpi_power_domains *rpi_domains)
+{
+ struct rpi_power_domain_packet packet;
+ int ret;
+
+ packet.domain = RPI_POWER_DOMAIN_ARM;
+ packet.on = ~0;
+
+ ret = rpi_firmware_property(rpi_domains->fw,
+ RPI_FIRMWARE_GET_DOMAIN_STATE,
+ &packet, sizeof(packet));
+
+ return ret == 0 && packet.on != ~0;
+}
+
+static int rpi_power_probe(struct platform_device *pdev)
+{
+ struct device_node *fw_np;
+ struct device *dev = &pdev->dev;
+ struct rpi_power_domains *rpi_domains;
+
+ rpi_domains = devm_kzalloc(dev, sizeof(*rpi_domains), GFP_KERNEL);
+ if (!rpi_domains)
+ return -ENOMEM;
+
+ rpi_domains->xlate.domains =
+ devm_kzalloc(dev, sizeof(*rpi_domains->xlate.domains) *
+ RPI_POWER_DOMAIN_COUNT, GFP_KERNEL);
+ if (!rpi_domains->xlate.domains)
+ return -ENOMEM;
+
+ rpi_domains->xlate.num_domains = RPI_POWER_DOMAIN_COUNT;
+
+ fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0);
+ if (!fw_np) {
+ dev_err(&pdev->dev, "no firmware node\n");
+ return -ENODEV;
+ }
+
+ rpi_domains->fw = rpi_firmware_get(fw_np);
+ of_node_put(fw_np);
+ if (!rpi_domains->fw)
+ return -EPROBE_DEFER;
+
+ rpi_domains->has_new_interface =
+ rpi_has_new_domain_support(rpi_domains);
+
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C0, "I2C0");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C1, "I2C1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C2, "I2C2");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VIDEO_SCALER,
+ "VIDEO_SCALER");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VPU1, "VPU1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_HDMI, "HDMI");
+
+ /*
+ * Use the old firmware interface for USB power, so that we
+ * can turn it on even if the firmware hasn't been updated.
+ */
+ rpi_init_old_power_domain(rpi_domains, RPI_POWER_DOMAIN_USB,
+ RPI_OLD_POWER_DOMAIN_USB, "USB");
+
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VEC, "VEC");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_JPEG, "JPEG");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_H264, "H264");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_V3D, "V3D");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ISP, "ISP");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM0, "UNICAM0");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM1, "UNICAM1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2RX, "CCP2RX");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CSI2, "CSI2");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CPI, "CPI");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI0, "DSI0");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI1, "DSI1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_TRANSPOSER,
+ "TRANSPOSER");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2TX, "CCP2TX");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CDP, "CDP");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ARM, "ARM");
+
+ of_genpd_add_provider_onecell(dev->of_node, &rpi_domains->xlate);
+
+ platform_set_drvdata(pdev, rpi_domains);
+
+ return 0;
+}
+
+static const struct of_device_id rpi_power_of_match[] = {
+ { .compatible = "raspberrypi,bcm2835-power", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rpi_power_of_match);
+
+static struct platform_driver rpi_power_driver = {
+ .driver = {
+ .name = "raspberrypi-power",
+ .of_match_table = rpi_power_of_match,
+ },
+ .probe = rpi_power_probe,
+};
+builtin_platform_driver(rpi_power_driver);
+
+MODULE_AUTHOR("Alexander Aring <aar@pengutronix.de>");
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("Raspberry Pi power domain driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/dove/pmu.c b/drivers/soc/dove/pmu.c
index abd087917..039374e9f 100644
--- a/drivers/soc/dove/pmu.c
+++ b/drivers/soc/dove/pmu.c
@@ -305,6 +305,49 @@ static int __init dove_init_pmu_irq(struct pmu_data *pmu, int irq)
return 0;
}
+int __init dove_init_pmu_legacy(const struct dove_pmu_initdata *initdata)
+{
+ const struct dove_pmu_domain_initdata *domain_initdata;
+ struct pmu_data *pmu;
+ int ret;
+
+ pmu = kzalloc(sizeof(*pmu), GFP_KERNEL);
+ if (!pmu)
+ return -ENOMEM;
+
+ spin_lock_init(&pmu->lock);
+ pmu->pmc_base = initdata->pmc_base;
+ pmu->pmu_base = initdata->pmu_base;
+
+ pmu_reset_init(pmu);
+ for (domain_initdata = initdata->domains; domain_initdata->name;
+ domain_initdata++) {
+ struct pmu_domain *domain;
+
+ domain = kzalloc(sizeof(*domain), GFP_KERNEL);
+ if (domain) {
+ domain->pmu = pmu;
+ domain->pwr_mask = domain_initdata->pwr_mask;
+ domain->rst_mask = domain_initdata->rst_mask;
+ domain->iso_mask = domain_initdata->iso_mask;
+ domain->base.name = domain_initdata->name;
+
+ __pmu_domain_register(domain, NULL);
+ }
+ }
+
+ ret = dove_init_pmu_irq(pmu, initdata->irq);
+ if (ret)
+ pr_err("dove_init_pmu_irq() failed: %d\n", ret);
+
+ if (pmu->irq_domain)
+ irq_domain_associate_many(pmu->irq_domain,
+ initdata->irq_domain_start,
+ 0, NR_PMU_IRQS);
+
+ return 0;
+}
+
/*
* pmu: power-manager@d0000 {
* compatible = "marvell,dove-pmu";
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
new file mode 100644
index 000000000..203307fd9
--- /dev/null
+++ b/drivers/soc/fsl/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux Kernel SOC fsl specific device drivers
+#
+
+obj-$(CONFIG_QUICC_ENGINE) += qe/
+obj-$(CONFIG_CPM) += qe/
diff --git a/drivers/soc/fsl/qe/Kconfig b/drivers/soc/fsl/qe/Kconfig
new file mode 100644
index 000000000..20978f205
--- /dev/null
+++ b/drivers/soc/fsl/qe/Kconfig
@@ -0,0 +1,38 @@
+#
+# QE Communication options
+#
+
+config QUICC_ENGINE
+ bool "Freescale QUICC Engine (QE) Support"
+ depends on FSL_SOC && PPC32
+ select GENERIC_ALLOCATOR
+ select CRC32
+ help
+ The QUICC Engine (QE) is a new generation of communications
+ coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+ Selecting this option means that you wish to build a kernel
+ for a machine with a QE coprocessor.
+
+config UCC_SLOW
+ bool
+ default y if SERIAL_QE
+ help
+ This option provides qe_lib support to UCC slow
+ protocols: UART, BISYNC, QMC
+
+config UCC_FAST
+ bool
+ default y if UCC_GETH
+ help
+ This option provides qe_lib support to UCC fast
+ protocols: HDLC, Ethernet, ATM, transparent
+
+config UCC
+ bool
+ default y if UCC_FAST || UCC_SLOW
+
+config QE_USB
+ bool
+ default y if USB_FSL_QE
+ help
+ QE USB Controller support
diff --git a/drivers/soc/fsl/qe/Makefile b/drivers/soc/fsl/qe/Makefile
new file mode 100644
index 000000000..ffac5410c
--- /dev/null
+++ b/drivers/soc/fsl/qe/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux ppc-specific parts of QE
+#
+obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o
+obj-$(CONFIG_CPM) += qe_common.o
+obj-$(CONFIG_UCC) += ucc.o
+obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
+obj-$(CONFIG_UCC_FAST) += ucc_fast.o
+obj-$(CONFIG_QE_USB) += usb.o
+obj-$(CONFIG_QE_GPIO) += gpio.o
diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
new file mode 100644
index 000000000..aa5c11acf
--- /dev/null
+++ b/drivers/soc/fsl/qe/gpio.c
@@ -0,0 +1,317 @@
+/*
+ * QUICC Engine GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <soc/fsl/qe/qe.h>
+
+struct qe_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ unsigned long pin_flags[QE_PIO_PINS];
+#define QE_PIN_REQUESTED 0
+
+ /* shadowed data register to clear/set bits safely */
+ u32 cpdata;
+
+ /* saved_regs used to restore dedicated functions */
+ struct qe_pio_regs saved_regs;
+};
+
+static inline struct qe_gpio_chip *
+to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
+}
+
+static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+
+ qe_gc->cpdata = in_be32(&regs->cpdata);
+ qe_gc->saved_regs.cpdata = qe_gc->cpdata;
+ qe_gc->saved_regs.cpdir1 = in_be32(&regs->cpdir1);
+ qe_gc->saved_regs.cpdir2 = in_be32(&regs->cpdir2);
+ qe_gc->saved_regs.cppar1 = in_be32(&regs->cppar1);
+ qe_gc->saved_regs.cppar2 = in_be32(&regs->cppar2);
+ qe_gc->saved_regs.cpodr = in_be32(&regs->cpodr);
+}
+
+static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+ u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+ return in_be32(&regs->cpdata) & pin_mask;
+}
+
+static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+ u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (val)
+ qe_gc->cpdata |= pin_mask;
+ else
+ qe_gc->cpdata &= ~pin_mask;
+
+ out_be32(&regs->cpdata, qe_gc->cpdata);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+
+static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ return 0;
+}
+
+static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ unsigned long flags;
+
+ qe_gpio_set(gc, gpio, val);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ return 0;
+}
+
+struct qe_pin {
+ /*
+ * The qe_gpio_chip name is unfortunate, we should change that to
+ * something like qe_pio_controller. Someday.
+ */
+ struct qe_gpio_chip *controller;
+ int num;
+};
+
+/**
+ * qe_pin_request - Request a QE pin
+ * @np: device node to get a pin from
+ * @index: index of a pin in the device tree
+ * Context: non-atomic
+ *
+ * This function return qe_pin so that you could use it with the rest of
+ * the QE Pin Multiplexing API.
+ */
+struct qe_pin *qe_pin_request(struct device_node *np, int index)
+{
+ struct qe_pin *qe_pin;
+ struct gpio_chip *gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct qe_gpio_chip *qe_gc;
+ int err;
+ unsigned long flags;
+
+ qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
+ if (!qe_pin) {
+ pr_debug("%s: can't allocate memory\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ err = of_get_gpio(np, index);
+ if (err < 0)
+ goto err0;
+ gc = gpio_to_chip(err);
+ if (WARN_ON(!gc))
+ goto err0;
+
+ if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
+ pr_debug("%s: tried to get a non-qe pin\n", __func__);
+ err = -EINVAL;
+ goto err0;
+ }
+
+ mm_gc = to_of_mm_gpio_chip(gc);
+ qe_gc = to_qe_gpio_chip(mm_gc);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ err -= gc->base;
+ if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
+ qe_pin->controller = qe_gc;
+ qe_pin->num = err;
+ err = 0;
+ } else {
+ err = -EBUSY;
+ }
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ if (!err)
+ return qe_pin;
+err0:
+ kfree(qe_pin);
+ pr_debug("%s failed with status %d\n", __func__, err);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL(qe_pin_request);
+
+/**
+ * qe_pin_free - Free a pin
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function frees the qe_pin structure and makes a pin available
+ * for further qe_pin_request() calls.
+ */
+void qe_pin_free(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ unsigned long flags;
+ const int pin = qe_pin->num;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+ test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ kfree(qe_pin);
+}
+EXPORT_SYMBOL(qe_pin_free);
+
+/**
+ * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function resets a pin to a dedicated peripheral function that
+ * has been set up by the firmware.
+ */
+void qe_pin_set_dedicated(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ struct qe_pio_regs *sregs = &qe_gc->saved_regs;
+ int pin = qe_pin->num;
+ u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1));
+ u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2);
+ bool second_reg = pin > (QE_PIO_PINS / 2) - 1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (second_reg) {
+ clrsetbits_be32(&regs->cpdir2, mask2, sregs->cpdir2 & mask2);
+ clrsetbits_be32(&regs->cppar2, mask2, sregs->cppar2 & mask2);
+ } else {
+ clrsetbits_be32(&regs->cpdir1, mask2, sregs->cpdir1 & mask2);
+ clrsetbits_be32(&regs->cppar1, mask2, sregs->cppar1 & mask2);
+ }
+
+ if (sregs->cpdata & mask1)
+ qe_gc->cpdata |= mask1;
+ else
+ qe_gc->cpdata &= ~mask1;
+
+ out_be32(&regs->cpdata, qe_gc->cpdata);
+ clrsetbits_be32(&regs->cpodr, mask1, sregs->cpodr & mask1);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_dedicated);
+
+/**
+ * qe_pin_set_gpio - Set a pin to the GPIO mode
+ * @qe_pin: pointer to the qe_pin structure
+ * Context: any
+ *
+ * This function sets a pin to the GPIO mode.
+ */
+void qe_pin_set_gpio(struct qe_pin *qe_pin)
+{
+ struct qe_gpio_chip *qe_gc = qe_pin->controller;
+ struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ /* Let's make it input by default, GPIO API is able to change that. */
+ __par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_gpio);
+
+static int __init qe_add_gpiochips(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
+ int ret;
+ struct qe_gpio_chip *qe_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct gpio_chip *gc;
+
+ qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
+ if (!qe_gc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ spin_lock_init(&qe_gc->lock);
+
+ mm_gc = &qe_gc->mm_gc;
+ gc = &mm_gc->gc;
+
+ mm_gc->save_regs = qe_gpio_save_regs;
+ gc->ngpio = QE_PIO_PINS;
+ gc->direction_input = qe_gpio_dir_in;
+ gc->direction_output = qe_gpio_dir_out;
+ gc->get = qe_gpio_get;
+ gc->set = qe_gpio_set;
+
+ ret = of_mm_gpiochip_add(np, mm_gc);
+ if (ret)
+ goto err;
+ continue;
+err:
+ pr_err("%s: registration failed with status %d\n",
+ np->full_name, ret);
+ kfree(qe_gc);
+ /* try others anyway */
+ }
+ return 0;
+}
+arch_initcall(qe_add_gpiochips);
diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c
new file mode 100644
index 000000000..709fc6380
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe.c
@@ -0,0 +1,719 @@
+/*
+ * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
+ *
+ * Description:
+ * General Purpose functions for the global management of the
+ * QUICC Engine (QE).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_platform.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+#include <asm/prom.h>
+#include <asm/rheap.h>
+
+static void qe_snums_init(void);
+static int qe_sdma_init(void);
+
+static DEFINE_SPINLOCK(qe_lock);
+DEFINE_SPINLOCK(cmxgcr_lock);
+EXPORT_SYMBOL(cmxgcr_lock);
+
+/* QE snum state */
+enum qe_snum_state {
+ QE_SNUM_STATE_USED,
+ QE_SNUM_STATE_FREE
+};
+
+/* QE snum */
+struct qe_snum {
+ u8 num;
+ enum qe_snum_state state;
+};
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+struct qe_immap __iomem *qe_immr;
+EXPORT_SYMBOL(qe_immr);
+
+static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
+static unsigned int qe_num_of_snum;
+
+static phys_addr_t qebase = -1;
+
+phys_addr_t get_qe_base(void)
+{
+ struct device_node *qe;
+ int size;
+ const u32 *prop;
+
+ if (qebase != -1)
+ return qebase;
+
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return qebase;
+ }
+
+ prop = of_get_property(qe, "reg", &size);
+ if (prop && size >= sizeof(*prop))
+ qebase = of_translate_address(qe, prop);
+ of_node_put(qe);
+
+ return qebase;
+}
+
+EXPORT_SYMBOL(get_qe_base);
+
+void qe_reset(void)
+{
+ if (qe_immr == NULL)
+ qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
+
+ qe_snums_init();
+
+ qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
+ QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ /* Reclaim the MURAM memory for our use. */
+ qe_muram_init();
+
+ if (qe_sdma_init())
+ panic("sdma init failed!");
+}
+
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
+{
+ unsigned long flags;
+ u8 mcn_shift = 0, dev_shift = 0;
+ u32 ret;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ if (cmd == QE_RESET) {
+ out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+ } else {
+ if (cmd == QE_ASSIGN_PAGE) {
+ /* Here device is the SNUM, not sub-block */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ } else if (cmd == QE_ASSIGN_RISC) {
+ /* Here device is the SNUM, and mcnProtocol is
+ * e_QeCmdRiscAssignment value */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
+ } else {
+ if (device == QE_CR_SUBBLOCK_USB)
+ mcn_shift = QE_CR_MCN_USB_SHIFT;
+ else
+ mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
+ }
+
+ out_be32(&qe_immr->cp.cecdr, cmd_input);
+ out_be32(&qe_immr->cp.cecr,
+ (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
+ mcn_protocol << mcn_shift));
+ }
+
+ /* wait for the QE_CR_FLG to clear */
+ ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+ 100, 0);
+ /* On timeout (e.g. failure), the expression will be false (ret == 0),
+ otherwise it will be true (ret == 1). */
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return ret == 1;
+}
+EXPORT_SYMBOL(qe_issue_cmd);
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * 16 BRGs, which can be connected to the QE channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The BRG clock is the QE clock divided by 2.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+static unsigned int brg_clk = 0;
+
+unsigned int qe_get_brg_clk(void)
+{
+ struct device_node *qe;
+ int size;
+ const u32 *prop;
+
+ if (brg_clk)
+ return brg_clk;
+
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return brg_clk;
+ }
+
+ prop = of_get_property(qe, "brg-frequency", &size);
+ if (prop && size == sizeof(*prop))
+ brg_clk = *prop;
+
+ of_node_put(qe);
+
+ return brg_clk;
+}
+EXPORT_SYMBOL(qe_get_brg_clk);
+
+/* Program the BRG to the given sampling rate and multiplier
+ *
+ * @brg: the BRG, QE_BRG1 - QE_BRG16
+ * @rate: the desired sampling rate
+ * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
+ * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
+ * then 'multiplier' should be 8.
+ */
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
+{
+ u32 divisor, tempval;
+ u32 div16 = 0;
+
+ if ((brg < QE_BRG1) || (brg > QE_BRG16))
+ return -EINVAL;
+
+ divisor = qe_get_brg_clk() / (rate * multiplier);
+
+ if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
+ div16 = QE_BRGC_DIV16;
+ divisor /= 16;
+ }
+
+ /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
+ that the BRG divisor must be even if you're not using divide-by-16
+ mode. */
+ if (!div16 && (divisor & 1) && (divisor > 3))
+ divisor++;
+
+ tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
+ QE_BRGC_ENABLE | div16;
+
+ out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
+
+ return 0;
+}
+EXPORT_SYMBOL(qe_setbrg);
+
+/* Convert a string to a QE clock source enum
+ *
+ * This function takes a string, typically from a property in the device
+ * tree, and returns the corresponding "enum qe_clock" value.
+*/
+enum qe_clock qe_clock_source(const char *source)
+{
+ unsigned int i;
+
+ if (strcasecmp(source, "none") == 0)
+ return QE_CLK_NONE;
+
+ if (strncasecmp(source, "brg", 3) == 0) {
+ i = simple_strtoul(source + 3, NULL, 10);
+ if ((i >= 1) && (i <= 16))
+ return (QE_BRG1 - 1) + i;
+ else
+ return QE_CLK_DUMMY;
+ }
+
+ if (strncasecmp(source, "clk", 3) == 0) {
+ i = simple_strtoul(source + 3, NULL, 10);
+ if ((i >= 1) && (i <= 24))
+ return (QE_CLK1 - 1) + i;
+ else
+ return QE_CLK_DUMMY;
+ }
+
+ return QE_CLK_DUMMY;
+}
+EXPORT_SYMBOL(qe_clock_source);
+
+/* Initialize SNUMs (thread serial numbers) according to
+ * QE Module Control chapter, SNUM table
+ */
+static void qe_snums_init(void)
+{
+ int i;
+ static const u8 snum_init_76[] = {
+ 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+ 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+ 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+ 0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D,
+ 0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D,
+ 0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D,
+ 0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD,
+ 0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD,
+ 0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED,
+ 0xF4, 0xF5, 0xFC, 0xFD,
+ };
+ static const u8 snum_init_46[] = {
+ 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+ 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+ 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+ 0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
+ 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
+ 0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
+ };
+ static const u8 *snum_init;
+
+ qe_num_of_snum = qe_get_num_of_snums();
+
+ if (qe_num_of_snum == 76)
+ snum_init = snum_init_76;
+ else
+ snum_init = snum_init_46;
+
+ for (i = 0; i < qe_num_of_snum; i++) {
+ snums[i].num = snum_init[i];
+ snums[i].state = QE_SNUM_STATE_FREE;
+ }
+}
+
+int qe_get_snum(void)
+{
+ unsigned long flags;
+ int snum = -EBUSY;
+ int i;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ for (i = 0; i < qe_num_of_snum; i++) {
+ if (snums[i].state == QE_SNUM_STATE_FREE) {
+ snums[i].state = QE_SNUM_STATE_USED;
+ snum = snums[i].num;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return snum;
+}
+EXPORT_SYMBOL(qe_get_snum);
+
+void qe_put_snum(u8 snum)
+{
+ int i;
+
+ for (i = 0; i < qe_num_of_snum; i++) {
+ if (snums[i].num == snum) {
+ snums[i].state = QE_SNUM_STATE_FREE;
+ break;
+ }
+ }
+}
+EXPORT_SYMBOL(qe_put_snum);
+
+static int qe_sdma_init(void)
+{
+ struct sdma __iomem *sdma = &qe_immr->sdma;
+ static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM;
+
+ if (!sdma)
+ return -ENODEV;
+
+ /* allocate 2 internal temporary buffers (512 bytes size each) for
+ * the SDMA */
+ if (IS_ERR_VALUE(sdma_buf_offset)) {
+ sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
+ if (IS_ERR_VALUE(sdma_buf_offset))
+ return -ENOMEM;
+ }
+
+ out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
+ out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
+ (0x1 << QE_SDMR_CEN_SHIFT)));
+
+ return 0;
+}
+
+/* The maximum number of RISCs we support */
+#define MAX_QE_RISC 4
+
+/* Firmware information stored here for qe_get_firmware_info() */
+static struct qe_firmware_info qe_firmware_info;
+
+/*
+ * Set to 1 if QE firmware has been uploaded, and therefore
+ * qe_firmware_info contains valid data.
+ */
+static int qe_firmware_uploaded;
+
+/*
+ * Upload a QE microcode
+ *
+ * This function is a worker function for qe_upload_firmware(). It does
+ * the actual uploading of the microcode.
+ */
+static void qe_upload_microcode(const void *base,
+ const struct qe_microcode *ucode)
+{
+ const __be32 *code = base + be32_to_cpu(ucode->code_offset);
+ unsigned int i;
+
+ if (ucode->major || ucode->minor || ucode->revision)
+ printk(KERN_INFO "qe-firmware: "
+ "uploading microcode '%s' version %u.%u.%u\n",
+ ucode->id, ucode->major, ucode->minor, ucode->revision);
+ else
+ printk(KERN_INFO "qe-firmware: "
+ "uploading microcode '%s'\n", ucode->id);
+
+ /* Use auto-increment */
+ out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
+ QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
+
+ for (i = 0; i < be32_to_cpu(ucode->count); i++)
+ out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
+
+ /* Set I-RAM Ready Register */
+ out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
+}
+
+/*
+ * Upload a microcode to the I-RAM at a specific address.
+ *
+ * See Documentation/powerpc/qe_firmware.txt for information on QE microcode
+ * uploading.
+ *
+ * Currently, only version 1 is supported, so the 'version' field must be
+ * set to 1.
+ *
+ * The SOC model and revision are not validated, they are only displayed for
+ * informational purposes.
+ *
+ * 'calc_size' is the calculated size, in bytes, of the firmware structure and
+ * all of the microcode structures, minus the CRC.
+ *
+ * 'length' is the size that the structure says it is, including the CRC.
+ */
+int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+ unsigned int i;
+ unsigned int j;
+ u32 crc;
+ size_t calc_size = sizeof(struct qe_firmware);
+ size_t length;
+ const struct qe_header *hdr;
+
+ if (!firmware) {
+ printk(KERN_ERR "qe-firmware: invalid pointer\n");
+ return -EINVAL;
+ }
+
+ hdr = &firmware->header;
+ length = be32_to_cpu(hdr->length);
+
+ /* Check the magic */
+ if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
+ (hdr->magic[2] != 'F')) {
+ printk(KERN_ERR "qe-firmware: not a microcode\n");
+ return -EPERM;
+ }
+
+ /* Check the version */
+ if (hdr->version != 1) {
+ printk(KERN_ERR "qe-firmware: unsupported version\n");
+ return -EPERM;
+ }
+
+ /* Validate some of the fields */
+ if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
+ printk(KERN_ERR "qe-firmware: invalid data\n");
+ return -EINVAL;
+ }
+
+ /* Validate the length and check if there's a CRC */
+ calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);
+
+ for (i = 0; i < firmware->count; i++)
+ /*
+ * For situations where the second RISC uses the same microcode
+ * as the first, the 'code_offset' and 'count' fields will be
+ * zero, so it's okay to add those.
+ */
+ calc_size += sizeof(__be32) *
+ be32_to_cpu(firmware->microcode[i].count);
+
+ /* Validate the length */
+ if (length != calc_size + sizeof(__be32)) {
+ printk(KERN_ERR "qe-firmware: invalid length\n");
+ return -EPERM;
+ }
+
+ /* Validate the CRC */
+ crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size));
+ if (crc != crc32(0, firmware, calc_size)) {
+ printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
+ return -EIO;
+ }
+
+ /*
+ * If the microcode calls for it, split the I-RAM.
+ */
+ if (!firmware->split)
+ setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
+
+ if (firmware->soc.model)
+ printk(KERN_INFO
+ "qe-firmware: firmware '%s' for %u V%u.%u\n",
+ firmware->id, be16_to_cpu(firmware->soc.model),
+ firmware->soc.major, firmware->soc.minor);
+ else
+ printk(KERN_INFO "qe-firmware: firmware '%s'\n",
+ firmware->id);
+
+ /*
+ * The QE only supports one microcode per RISC, so clear out all the
+ * saved microcode information and put in the new.
+ */
+ memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
+ strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id));
+ qe_firmware_info.extended_modes = firmware->extended_modes;
+ memcpy(qe_firmware_info.vtraps, firmware->vtraps,
+ sizeof(firmware->vtraps));
+
+ /* Loop through each microcode. */
+ for (i = 0; i < firmware->count; i++) {
+ const struct qe_microcode *ucode = &firmware->microcode[i];
+
+ /* Upload a microcode if it's present */
+ if (ucode->code_offset)
+ qe_upload_microcode(firmware, ucode);
+
+ /* Program the traps for this processor */
+ for (j = 0; j < 16; j++) {
+ u32 trap = be32_to_cpu(ucode->traps[j]);
+
+ if (trap)
+ out_be32(&qe_immr->rsp[i].tibcr[j], trap);
+ }
+
+ /* Enable traps */
+ out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
+ }
+
+ qe_firmware_uploaded = 1;
+
+ return 0;
+}
+EXPORT_SYMBOL(qe_upload_firmware);
+
+/*
+ * Get info on the currently-loaded firmware
+ *
+ * This function also checks the device tree to see if the boot loader has
+ * uploaded a firmware already.
+ */
+struct qe_firmware_info *qe_get_firmware_info(void)
+{
+ static int initialized;
+ struct property *prop;
+ struct device_node *qe;
+ struct device_node *fw = NULL;
+ const char *sprop;
+ unsigned int i;
+
+ /*
+ * If we haven't checked yet, and a driver hasn't uploaded a firmware
+ * yet, then check the device tree for information.
+ */
+ if (qe_firmware_uploaded)
+ return &qe_firmware_info;
+
+ if (initialized)
+ return NULL;
+
+ initialized = 1;
+
+ /*
+ * Newer device trees have an "fsl,qe" compatible property for the QE
+ * node, but we still need to support older device trees.
+ */
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return NULL;
+ }
+
+ /* Find the 'firmware' child node */
+ for_each_child_of_node(qe, fw) {
+ if (strcmp(fw->name, "firmware") == 0)
+ break;
+ }
+
+ of_node_put(qe);
+
+ /* Did we find the 'firmware' node? */
+ if (!fw)
+ return NULL;
+
+ qe_firmware_uploaded = 1;
+
+ /* Copy the data into qe_firmware_info*/
+ sprop = of_get_property(fw, "id", NULL);
+ if (sprop)
+ strlcpy(qe_firmware_info.id, sprop,
+ sizeof(qe_firmware_info.id));
+
+ prop = of_find_property(fw, "extended-modes", NULL);
+ if (prop && (prop->length == sizeof(u64))) {
+ const u64 *iprop = prop->value;
+
+ qe_firmware_info.extended_modes = *iprop;
+ }
+
+ prop = of_find_property(fw, "virtual-traps", NULL);
+ if (prop && (prop->length == 32)) {
+ const u32 *iprop = prop->value;
+
+ for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++)
+ qe_firmware_info.vtraps[i] = iprop[i];
+ }
+
+ of_node_put(fw);
+
+ return &qe_firmware_info;
+}
+EXPORT_SYMBOL(qe_get_firmware_info);
+
+unsigned int qe_get_num_of_risc(void)
+{
+ struct device_node *qe;
+ int size;
+ unsigned int num_of_risc = 0;
+ const u32 *prop;
+
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ /* Older devices trees did not have an "fsl,qe"
+ * compatible property, so we need to look for
+ * the QE node by name.
+ */
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return num_of_risc;
+ }
+
+ prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
+ if (prop && size == sizeof(*prop))
+ num_of_risc = *prop;
+
+ of_node_put(qe);
+
+ return num_of_risc;
+}
+EXPORT_SYMBOL(qe_get_num_of_risc);
+
+unsigned int qe_get_num_of_snums(void)
+{
+ struct device_node *qe;
+ int size;
+ unsigned int num_of_snums;
+ const u32 *prop;
+
+ num_of_snums = 28; /* The default number of snum for threads is 28 */
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ /* Older devices trees did not have an "fsl,qe"
+ * compatible property, so we need to look for
+ * the QE node by name.
+ */
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return num_of_snums;
+ }
+
+ prop = of_get_property(qe, "fsl,qe-num-snums", &size);
+ if (prop && size == sizeof(*prop)) {
+ num_of_snums = *prop;
+ if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
+ /* No QE ever has fewer than 28 SNUMs */
+ pr_err("QE: number of snum is invalid\n");
+ of_node_put(qe);
+ return -EINVAL;
+ }
+ }
+
+ of_node_put(qe);
+
+ return num_of_snums;
+}
+EXPORT_SYMBOL(qe_get_num_of_snums);
+
+static int __init qe_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!np)
+ return -ENODEV;
+ qe_reset();
+ of_node_put(np);
+ return 0;
+}
+subsys_initcall(qe_init);
+
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
+static int qe_resume(struct platform_device *ofdev)
+{
+ if (!qe_alive_during_sleep())
+ qe_reset();
+ return 0;
+}
+
+static int qe_probe(struct platform_device *ofdev)
+{
+ return 0;
+}
+
+static const struct of_device_id qe_ids[] = {
+ { .compatible = "fsl,qe", },
+ { },
+};
+
+static struct platform_driver qe_driver = {
+ .driver = {
+ .name = "fsl-qe",
+ .of_match_table = qe_ids,
+ },
+ .probe = qe_probe,
+ .resume = qe_resume,
+};
+
+static int __init qe_drv_init(void)
+{
+ return platform_driver_register(&qe_driver);
+}
+device_initcall(qe_drv_init);
+#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */
diff --git a/drivers/soc/fsl/qe/qe_common.c b/drivers/soc/fsl/qe/qe_common.c
new file mode 100644
index 000000000..419fa5b7b
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe_common.c
@@ -0,0 +1,235 @@
+/*
+ * Common CPM code
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright 2007-2008,2010 Freescale Semiconductor, Inc.
+ *
+ * Some parts derived from commproc.c/cpm2_common.c, which is:
+ * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
+ * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+#include <linux/genalloc.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <soc/fsl/qe/qe.h>
+
+static struct gen_pool *muram_pool;
+static spinlock_t cpm_muram_lock;
+static u8 __iomem *muram_vbase;
+static phys_addr_t muram_pbase;
+
+struct muram_block {
+ struct list_head head;
+ unsigned long start;
+ int size;
+};
+
+static LIST_HEAD(muram_block_list);
+
+/* max address size we deal with */
+#define OF_MAX_ADDR_CELLS 4
+#define GENPOOL_OFFSET (4096 * 8)
+
+int cpm_muram_init(void)
+{
+ struct device_node *np;
+ struct resource r;
+ u32 zero[OF_MAX_ADDR_CELLS] = {};
+ resource_size_t max = 0;
+ int i = 0;
+ int ret = 0;
+
+ if (muram_pbase)
+ return 0;
+
+ spin_lock_init(&cpm_muram_lock);
+ np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
+ if (!np) {
+ /* try legacy bindings */
+ np = of_find_node_by_name(NULL, "data-only");
+ if (!np) {
+ pr_err("Cannot find CPM muram data node");
+ ret = -ENODEV;
+ goto out_muram;
+ }
+ }
+
+ muram_pool = gen_pool_create(0, -1);
+ muram_pbase = of_translate_address(np, zero);
+ if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) {
+ pr_err("Cannot translate zero through CPM muram node");
+ ret = -ENODEV;
+ goto out_pool;
+ }
+
+ while (of_address_to_resource(np, i++, &r) == 0) {
+ if (r.end > max)
+ max = r.end;
+ ret = gen_pool_add(muram_pool, r.start - muram_pbase +
+ GENPOOL_OFFSET, resource_size(&r), -1);
+ if (ret) {
+ pr_err("QE: couldn't add muram to pool!\n");
+ goto out_pool;
+ }
+ }
+
+ muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1);
+ if (!muram_vbase) {
+ pr_err("Cannot map QE muram");
+ ret = -ENOMEM;
+ goto out_pool;
+ }
+ goto out_muram;
+out_pool:
+ gen_pool_destroy(muram_pool);
+out_muram:
+ of_node_put(np);
+ return ret;
+}
+
+/*
+ * cpm_muram_alloc - allocate the requested size worth of multi-user ram
+ * @size: number of bytes to allocate
+ * @align: requested alignment, in bytes
+ *
+ * This function returns an offset into the muram area.
+ * Use cpm_dpram_addr() to get the virtual address of the area.
+ * Use cpm_muram_free() to free the allocation.
+ */
+unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
+{
+ unsigned long start;
+ unsigned long flags;
+ struct genpool_data_align muram_pool_data;
+
+ spin_lock_irqsave(&cpm_muram_lock, flags);
+ muram_pool_data.align = align;
+ start = cpm_muram_alloc_common(size, gen_pool_first_fit_align,
+ &muram_pool_data);
+ spin_unlock_irqrestore(&cpm_muram_lock, flags);
+ return start;
+}
+EXPORT_SYMBOL(cpm_muram_alloc);
+
+/**
+ * cpm_muram_free - free a chunk of multi-user ram
+ * @offset: The beginning of the chunk as returned by cpm_muram_alloc().
+ */
+int cpm_muram_free(unsigned long offset)
+{
+ unsigned long flags;
+ int size;
+ struct muram_block *tmp;
+
+ size = 0;
+ spin_lock_irqsave(&cpm_muram_lock, flags);
+ list_for_each_entry(tmp, &muram_block_list, head) {
+ if (tmp->start == offset) {
+ size = tmp->size;
+ list_del(&tmp->head);
+ kfree(tmp);
+ break;
+ }
+ }
+ gen_pool_free(muram_pool, offset + GENPOOL_OFFSET, size);
+ spin_unlock_irqrestore(&cpm_muram_lock, flags);
+ return size;
+}
+EXPORT_SYMBOL(cpm_muram_free);
+
+/*
+ * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram
+ * @offset: offset of allocation start address
+ * @size: number of bytes to allocate
+ * This function returns an offset into the muram area
+ * Use cpm_dpram_addr() to get the virtual address of the area.
+ * Use cpm_muram_free() to free the allocation.
+ */
+unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
+{
+ unsigned long start;
+ unsigned long flags;
+ struct genpool_data_fixed muram_pool_data_fixed;
+
+ spin_lock_irqsave(&cpm_muram_lock, flags);
+ muram_pool_data_fixed.offset = offset + GENPOOL_OFFSET;
+ start = cpm_muram_alloc_common(size, gen_pool_fixed_alloc,
+ &muram_pool_data_fixed);
+ spin_unlock_irqrestore(&cpm_muram_lock, flags);
+ return start;
+}
+EXPORT_SYMBOL(cpm_muram_alloc_fixed);
+
+/*
+ * cpm_muram_alloc_common - cpm_muram_alloc common code
+ * @size: number of bytes to allocate
+ * @algo: algorithm for alloc.
+ * @data: data for genalloc's algorithm.
+ *
+ * This function returns an offset into the muram area.
+ */
+unsigned long cpm_muram_alloc_common(unsigned long size, genpool_algo_t algo,
+ void *data)
+{
+ struct muram_block *entry;
+ unsigned long start;
+
+ start = gen_pool_alloc_algo(muram_pool, size, algo, data);
+ if (!start)
+ goto out2;
+ start = start - GENPOOL_OFFSET;
+ memset_io(cpm_muram_addr(start), 0, size);
+ entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ goto out1;
+ entry->start = start;
+ entry->size = size;
+ list_add(&entry->head, &muram_block_list);
+
+ return start;
+out1:
+ gen_pool_free(muram_pool, start, size);
+out2:
+ return (unsigned long)-ENOMEM;
+}
+
+/**
+ * cpm_muram_addr - turn a muram offset into a virtual address
+ * @offset: muram offset to convert
+ */
+void __iomem *cpm_muram_addr(unsigned long offset)
+{
+ return muram_vbase + offset;
+}
+EXPORT_SYMBOL(cpm_muram_addr);
+
+unsigned long cpm_muram_offset(void __iomem *addr)
+{
+ return addr - (void __iomem *)muram_vbase;
+}
+EXPORT_SYMBOL(cpm_muram_offset);
+
+/**
+ * cpm_muram_dma - turn a muram virtual address into a DMA address
+ * @offset: virtual address from cpm_muram_addr() to convert
+ */
+dma_addr_t cpm_muram_dma(void __iomem *addr)
+{
+ return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
+}
+EXPORT_SYMBOL(cpm_muram_dma);
diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c
new file mode 100644
index 000000000..b77d01ff8
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe_ic.c
@@ -0,0 +1,503 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_ic.c
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * QUICC ENGINE Interrupt Controller
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <soc/fsl/qe/qe_ic.h>
+
+#include "qe_ic.h"
+
+static DEFINE_RAW_SPINLOCK(qe_ic_lock);
+
+static struct qe_ic_info qe_ic_info[] = {
+ [1] = {
+ .mask = 0x00008000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [2] = {
+ .mask = 0x00004000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [3] = {
+ .mask = 0x00002000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [10] = {
+ .mask = 0x00000040,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [11] = {
+ .mask = 0x00000020,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [12] = {
+ .mask = 0x00000010,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [13] = {
+ .mask = 0x00000008,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [14] = {
+ .mask = 0x00000004,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 5,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [15] = {
+ .mask = 0x00000002,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 6,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [20] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTA,
+ },
+ [25] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [26] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [27] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [28] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [32] = {
+ .mask = 0x80000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [33] = {
+ .mask = 0x40000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [34] = {
+ .mask = 0x20000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [35] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [36] = {
+ .mask = 0x08000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [40] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [41] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [42] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [43] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPYCC,
+ },
+};
+
+static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg)
+{
+ return in_be32(base + (reg >> 2));
+}
+
+static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg,
+ u32 value)
+{
+ out_be32(base + (reg >> 2), value);
+}
+
+static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
+{
+ return irq_get_chip_data(virq);
+}
+
+static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
+{
+ return irq_data_get_irq_chip_data(d);
+}
+
+static void qe_ic_unmask_irq(struct irq_data *d)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
+ unsigned int src = irqd_to_hwirq(d);
+ unsigned long flags;
+ u32 temp;
+
+ raw_spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp | qe_ic_info[src].mask);
+
+ raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq(struct irq_data *d)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
+ unsigned int src = irqd_to_hwirq(d);
+ unsigned long flags;
+ u32 temp;
+
+ raw_spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp & ~qe_ic_info[src].mask);
+
+ /* Flush the above write before enabling interrupts; otherwise,
+ * spurious interrupts will sometimes happen. To be 100% sure
+ * that the write has reached the device before interrupts are
+ * enabled, the mask register would have to be read back; however,
+ * this is not required for correctness, only to avoid wasting
+ * time on a large number of spurious interrupts. In testing,
+ * a sync reduced the observed spurious interrupts to zero.
+ */
+ mb();
+
+ raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static struct irq_chip qe_ic_irq_chip = {
+ .name = "QEIC",
+ .irq_unmask = qe_ic_unmask_irq,
+ .irq_mask = qe_ic_mask_irq,
+ .irq_mask_ack = qe_ic_mask_irq,
+};
+
+static int qe_ic_host_match(struct irq_domain *h, struct device_node *node,
+ enum irq_domain_bus_token bus_token)
+{
+ /* Exact match, unless qe_ic node is NULL */
+ struct device_node *of_node = irq_domain_get_of_node(h);
+ return of_node == NULL || of_node == node;
+}
+
+static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct qe_ic *qe_ic = h->host_data;
+ struct irq_chip *chip;
+
+ if (qe_ic_info[hw].mask == 0) {
+ printk(KERN_ERR "Can't map reserved IRQ\n");
+ return -EINVAL;
+ }
+ /* Default chip */
+ chip = &qe_ic->hc_irq;
+
+ irq_set_chip_data(virq, qe_ic);
+ irq_set_status_flags(virq, IRQ_LEVEL);
+
+ irq_set_chip_and_handler(virq, chip, handle_level_irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops qe_ic_host_ops = {
+ .match = qe_ic_host_match,
+ .map = qe_ic_host_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+void __init qe_ic_init(struct device_node *node, unsigned int flags,
+ void (*low_handler)(struct irq_desc *desc),
+ void (*high_handler)(struct irq_desc *desc))
+{
+ struct qe_ic *qe_ic;
+ struct resource res;
+ u32 temp = 0, ret, high_active = 0;
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ return;
+
+ qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
+ if (qe_ic == NULL)
+ return;
+
+ qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
+ &qe_ic_host_ops, qe_ic);
+ if (qe_ic->irqhost == NULL) {
+ kfree(qe_ic);
+ return;
+ }
+
+ qe_ic->regs = ioremap(res.start, resource_size(&res));
+
+ qe_ic->hc_irq = qe_ic_irq_chip;
+
+ qe_ic->virq_high = irq_of_parse_and_map(node, 0);
+ qe_ic->virq_low = irq_of_parse_and_map(node, 1);
+
+ if (qe_ic->virq_low == NO_IRQ) {
+ printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+ kfree(qe_ic);
+ return;
+ }
+
+ /* default priority scheme is grouped. If spread mode is */
+ /* required, configure cicr accordingly. */
+ if (flags & QE_IC_SPREADMODE_GRP_W)
+ temp |= CICR_GWCC;
+ if (flags & QE_IC_SPREADMODE_GRP_X)
+ temp |= CICR_GXCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Y)
+ temp |= CICR_GYCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Z)
+ temp |= CICR_GZCC;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCA)
+ temp |= CICR_GRTA;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCB)
+ temp |= CICR_GRTB;
+
+ /* choose destination signal for highest priority interrupt */
+ if (flags & QE_IC_HIGH_SIGNAL) {
+ temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
+ high_active = 1;
+ }
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+
+ irq_set_handler_data(qe_ic->virq_low, qe_ic);
+ irq_set_chained_handler(qe_ic->virq_low, low_handler);
+
+ if (qe_ic->virq_high != NO_IRQ &&
+ qe_ic->virq_high != qe_ic->virq_low) {
+ irq_set_handler_data(qe_ic->virq_high, qe_ic);
+ irq_set_chained_handler(qe_ic->virq_high, high_handler);
+ }
+}
+
+void qe_ic_set_highest_priority(unsigned int virq, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp = 0;
+
+ temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
+
+ temp &= ~CICR_HP_MASK;
+ temp |= src << CICR_HP_SHIFT;
+
+ temp &= ~CICR_HPIT_MASK;
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+}
+
+/* Set Priority level within its group, from 1 to 8 */
+int qe_ic_set_priority(unsigned int virq, unsigned int priority)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp;
+
+ if (priority > 8 || priority == 0)
+ return -EINVAL;
+ if (src > 127)
+ return -EINVAL;
+ if (qe_ic_info[src].pri_reg == 0)
+ return -EINVAL;
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
+
+ if (priority < 4) {
+ temp &= ~(0x7 << (32 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
+ } else {
+ temp &= ~(0x7 << (24 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
+ }
+
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
+
+ return 0;
+}
+
+/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp, control_reg = QEIC_CICNR, shift = 0;
+
+ if (priority > 2 || priority == 0)
+ return -EINVAL;
+
+ switch (qe_ic_info[src].pri_reg) {
+ case QEIC_CIPZCC:
+ shift = CICNR_ZCC1T_SHIFT;
+ break;
+ case QEIC_CIPWCC:
+ shift = CICNR_WCC1T_SHIFT;
+ break;
+ case QEIC_CIPYCC:
+ shift = CICNR_YCC1T_SHIFT;
+ break;
+ case QEIC_CIPXCC:
+ shift = CICNR_XCC1T_SHIFT;
+ break;
+ case QEIC_CIPRTA:
+ shift = CRICR_RTA1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ case QEIC_CIPRTB:
+ shift = CRICR_RTB1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ shift += (2 - priority) * 2;
+ temp = qe_ic_read(qe_ic->regs, control_reg);
+ temp &= ~(SIGNAL_MASK << shift);
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
+ qe_ic_write(qe_ic->regs, control_reg, temp);
+
+ return 0;
+}
+
+static struct bus_type qe_ic_subsys = {
+ .name = "qe_ic",
+ .dev_name = "qe_ic",
+};
+
+static struct device device_qe_ic = {
+ .id = 0,
+ .bus = &qe_ic_subsys,
+};
+
+static int __init init_qe_ic_sysfs(void)
+{
+ int rc;
+
+ printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
+
+ rc = subsys_system_register(&qe_ic_subsys, NULL);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys class\n");
+ return -ENODEV;
+ }
+ rc = device_register(&device_qe_ic);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys device\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+subsys_initcall(init_qe_ic_sysfs);
diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h
new file mode 100644
index 000000000..926a2ed42
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe_ic.h
@@ -0,0 +1,103 @@
+/*
+ * drivers/soc/fsl/qe/qe_ic.h
+ *
+ * QUICC ENGINE Interrupt Controller Header
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _POWERPC_SYSDEV_QE_IC_H
+#define _POWERPC_SYSDEV_QE_IC_H
+
+#include <soc/fsl/qe/qe_ic.h>
+
+#define NR_QE_IC_INTS 64
+
+/* QE IC registers offset */
+#define QEIC_CICR 0x00
+#define QEIC_CIVEC 0x04
+#define QEIC_CRIPNR 0x08
+#define QEIC_CIPNR 0x0c
+#define QEIC_CIPXCC 0x10
+#define QEIC_CIPYCC 0x14
+#define QEIC_CIPWCC 0x18
+#define QEIC_CIPZCC 0x1c
+#define QEIC_CIMR 0x20
+#define QEIC_CRIMR 0x24
+#define QEIC_CICNR 0x28
+#define QEIC_CIPRTA 0x30
+#define QEIC_CIPRTB 0x34
+#define QEIC_CRICR 0x3c
+#define QEIC_CHIVEC 0x60
+
+/* Interrupt priority registers */
+#define CIPCC_SHIFT_PRI0 29
+#define CIPCC_SHIFT_PRI1 26
+#define CIPCC_SHIFT_PRI2 23
+#define CIPCC_SHIFT_PRI3 20
+#define CIPCC_SHIFT_PRI4 13
+#define CIPCC_SHIFT_PRI5 10
+#define CIPCC_SHIFT_PRI6 7
+#define CIPCC_SHIFT_PRI7 4
+
+/* CICR priority modes */
+#define CICR_GWCC 0x00040000
+#define CICR_GXCC 0x00020000
+#define CICR_GYCC 0x00010000
+#define CICR_GZCC 0x00080000
+#define CICR_GRTA 0x00200000
+#define CICR_GRTB 0x00400000
+#define CICR_HPIT_SHIFT 8
+#define CICR_HPIT_MASK 0x00000300
+#define CICR_HP_SHIFT 24
+#define CICR_HP_MASK 0x3f000000
+
+/* CICNR */
+#define CICNR_WCC1T_SHIFT 20
+#define CICNR_ZCC1T_SHIFT 28
+#define CICNR_YCC1T_SHIFT 12
+#define CICNR_XCC1T_SHIFT 4
+
+/* CRICR */
+#define CRICR_RTA1T_SHIFT 20
+#define CRICR_RTB1T_SHIFT 28
+
+/* Signal indicator */
+#define SIGNAL_MASK 3
+#define SIGNAL_HIGH 2
+#define SIGNAL_LOW 0
+
+struct qe_ic {
+ /* Control registers offset */
+ volatile u32 __iomem *regs;
+
+ /* The remapper for this QEIC */
+ struct irq_domain *irqhost;
+
+ /* The "linux" controller struct */
+ struct irq_chip hc_irq;
+
+ /* VIRQ numbers of QE high/low irqs */
+ unsigned int virq_high;
+ unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+ u32 mask; /* location of this source at the QIMR register. */
+ u32 mask_reg; /* Mask register offset */
+ u8 pri_code; /* for grouped interrupts sources - the interrupt
+ code as appears at the group priority register */
+ u32 pri_reg; /* Group priority register offset */
+};
+
+#endif /* _POWERPC_SYSDEV_QE_IC_H */
diff --git a/drivers/soc/fsl/qe/qe_io.c b/drivers/soc/fsl/qe/qe_io.c
new file mode 100644
index 000000000..7ae59abc7
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe_io.c
@@ -0,0 +1,192 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_io.c
+ *
+ * QE Parallel I/O ports configuration routines
+ *
+ * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+#include <soc/fsl/qe/qe.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+
+#undef DEBUG
+
+static struct qe_pio_regs __iomem *par_io;
+static int num_par_io_ports = 0;
+
+int par_io_init(struct device_node *np)
+{
+ struct resource res;
+ int ret;
+ const u32 *num_ports;
+
+ /* Map Parallel I/O ports registers */
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret)
+ return ret;
+ par_io = ioremap(res.start, resource_size(&res));
+
+ num_ports = of_get_property(np, "num-ports", NULL);
+ if (num_ports)
+ num_par_io_ports = *num_ports;
+
+ return 0;
+}
+
+void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
+ int open_drain, int assignment, int has_irq)
+{
+ u32 pin_mask1bit;
+ u32 pin_mask2bits;
+ u32 new_mask2bits;
+ u32 tmp_val;
+
+ /* calculate pin location for single and 2 bits information */
+ pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
+
+ /* Set open drain, if required */
+ tmp_val = in_be32(&par_io->cpodr);
+ if (open_drain)
+ out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
+ else
+ out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
+
+ /* define direction */
+ tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+ in_be32(&par_io->cpdir2) :
+ in_be32(&par_io->cpdir1);
+
+ /* get all bits mask for 2 bit per port */
+ pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
+ (pin % (QE_PIO_PINS / 2) + 1) * 2));
+
+ /* Get the final mask we need for the right definition */
+ new_mask2bits = (u32) (dir << (QE_PIO_PINS -
+ (pin % (QE_PIO_PINS / 2) + 1) * 2));
+
+ /* clear and set 2 bits mask */
+ if (pin > (QE_PIO_PINS / 2) - 1) {
+ out_be32(&par_io->cpdir2,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
+ } else {
+ out_be32(&par_io->cpdir1,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
+ }
+ /* define pin assignment */
+ tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+ in_be32(&par_io->cppar2) :
+ in_be32(&par_io->cppar1);
+
+ new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
+ (pin % (QE_PIO_PINS / 2) + 1) * 2));
+ /* clear and set 2 bits mask */
+ if (pin > (QE_PIO_PINS / 2) - 1) {
+ out_be32(&par_io->cppar2,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
+ } else {
+ out_be32(&par_io->cppar1,
+ ~pin_mask2bits & tmp_val);
+ tmp_val &= ~pin_mask2bits;
+ out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
+ }
+}
+EXPORT_SYMBOL(__par_io_config_pin);
+
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq)
+{
+ if (!par_io || port >= num_par_io_ports)
+ return -EINVAL;
+
+ __par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
+ has_irq);
+ return 0;
+}
+EXPORT_SYMBOL(par_io_config_pin);
+
+int par_io_data_set(u8 port, u8 pin, u8 val)
+{
+ u32 pin_mask, tmp_val;
+
+ if (port >= num_par_io_ports)
+ return -EINVAL;
+ if (pin >= QE_PIO_PINS)
+ return -EINVAL;
+ /* calculate pin location */
+ pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
+
+ tmp_val = in_be32(&par_io[port].cpdata);
+
+ if (val == 0) /* clear */
+ out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
+ else /* set */
+ out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
+
+ return 0;
+}
+EXPORT_SYMBOL(par_io_data_set);
+
+int par_io_of_config(struct device_node *np)
+{
+ struct device_node *pio;
+ const phandle *ph;
+ int pio_map_len;
+ const unsigned int *pio_map;
+
+ if (par_io == NULL) {
+ printk(KERN_ERR "par_io not initialized\n");
+ return -1;
+ }
+
+ ph = of_get_property(np, "pio-handle", NULL);
+ if (ph == NULL) {
+ printk(KERN_ERR "pio-handle not available\n");
+ return -1;
+ }
+
+ pio = of_find_node_by_phandle(*ph);
+
+ pio_map = of_get_property(pio, "pio-map", &pio_map_len);
+ if (pio_map == NULL) {
+ printk(KERN_ERR "pio-map is not set!\n");
+ return -1;
+ }
+ pio_map_len /= sizeof(unsigned int);
+ if ((pio_map_len % 6) != 0) {
+ printk(KERN_ERR "pio-map format wrong!\n");
+ return -1;
+ }
+
+ while (pio_map_len > 0) {
+ par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
+ (int) pio_map[2], (int) pio_map[3],
+ (int) pio_map[4], (int) pio_map[5]);
+ pio_map += 6;
+ pio_map_len -= 6;
+ }
+ of_node_put(pio);
+ return 0;
+}
+EXPORT_SYMBOL(par_io_of_config);
diff --git a/drivers/soc/fsl/qe/ucc.c b/drivers/soc/fsl/qe/ucc.c
new file mode 100644
index 000000000..b59d3358f
--- /dev/null
+++ b/drivers/soc/fsl/qe/ucc.c
@@ -0,0 +1,212 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/ucc.c
+ *
+ * QE UCC API Set - UCC specific routines implementations.
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/stddef.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/ucc.h>
+
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
+{
+ unsigned long flags;
+
+ if (ucc_num > UCC_MAX_NUM - 1)
+ return -EINVAL;
+
+ spin_lock_irqsave(&cmxgcr_lock, flags);
+ clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
+ ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
+ spin_unlock_irqrestore(&cmxgcr_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
+
+/* Configure the UCC to either Slow or Fast.
+ *
+ * A given UCC can be figured to support either "slow" devices (e.g. UART)
+ * or "fast" devices (e.g. Ethernet).
+ *
+ * 'ucc_num' is the UCC number, from 0 - 7.
+ *
+ * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
+ * must always be set to 1.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
+{
+ u8 __iomem *guemr;
+
+ /* The GUEMR register is at the same location for both slow and fast
+ devices, so we just use uccX.slow.guemr. */
+ switch (ucc_num) {
+ case 0: guemr = &qe_immr->ucc1.slow.guemr;
+ break;
+ case 1: guemr = &qe_immr->ucc2.slow.guemr;
+ break;
+ case 2: guemr = &qe_immr->ucc3.slow.guemr;
+ break;
+ case 3: guemr = &qe_immr->ucc4.slow.guemr;
+ break;
+ case 4: guemr = &qe_immr->ucc5.slow.guemr;
+ break;
+ case 5: guemr = &qe_immr->ucc6.slow.guemr;
+ break;
+ case 6: guemr = &qe_immr->ucc7.slow.guemr;
+ break;
+ case 7: guemr = &qe_immr->ucc8.slow.guemr;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
+ UCC_GUEMR_SET_RESERVED3 | speed);
+
+ return 0;
+}
+
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
+ unsigned int *reg_num, unsigned int *shift)
+{
+ unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
+
+ *reg_num = cmx + 1;
+ *cmxucr = &qe_immr->qmx.cmxucr[cmx];
+ *shift = 16 - 8 * (ucc_num & 2);
+}
+
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
+{
+ __be32 __iomem *cmxucr;
+ unsigned int reg_num;
+ unsigned int shift;
+
+ /* check if the UCC number is in range. */
+ if (ucc_num > UCC_MAX_NUM - 1)
+ return -EINVAL;
+
+ get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
+
+ if (set)
+ setbits32(cmxucr, mask << shift);
+ else
+ clrbits32(cmxucr, mask << shift);
+
+ return 0;
+}
+
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+ enum comm_dir mode)
+{
+ __be32 __iomem *cmxucr;
+ unsigned int reg_num;
+ unsigned int shift;
+ u32 clock_bits = 0;
+
+ /* check if the UCC number is in range. */
+ if (ucc_num > UCC_MAX_NUM - 1)
+ return -EINVAL;
+
+ /* The communications direction must be RX or TX */
+ if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
+ return -EINVAL;
+
+ get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
+
+ switch (reg_num) {
+ case 1:
+ switch (clock) {
+ case QE_BRG1: clock_bits = 1; break;
+ case QE_BRG2: clock_bits = 2; break;
+ case QE_BRG7: clock_bits = 3; break;
+ case QE_BRG8: clock_bits = 4; break;
+ case QE_CLK9: clock_bits = 5; break;
+ case QE_CLK10: clock_bits = 6; break;
+ case QE_CLK11: clock_bits = 7; break;
+ case QE_CLK12: clock_bits = 8; break;
+ case QE_CLK15: clock_bits = 9; break;
+ case QE_CLK16: clock_bits = 10; break;
+ default: break;
+ }
+ break;
+ case 2:
+ switch (clock) {
+ case QE_BRG5: clock_bits = 1; break;
+ case QE_BRG6: clock_bits = 2; break;
+ case QE_BRG7: clock_bits = 3; break;
+ case QE_BRG8: clock_bits = 4; break;
+ case QE_CLK13: clock_bits = 5; break;
+ case QE_CLK14: clock_bits = 6; break;
+ case QE_CLK19: clock_bits = 7; break;
+ case QE_CLK20: clock_bits = 8; break;
+ case QE_CLK15: clock_bits = 9; break;
+ case QE_CLK16: clock_bits = 10; break;
+ default: break;
+ }
+ break;
+ case 3:
+ switch (clock) {
+ case QE_BRG9: clock_bits = 1; break;
+ case QE_BRG10: clock_bits = 2; break;
+ case QE_BRG15: clock_bits = 3; break;
+ case QE_BRG16: clock_bits = 4; break;
+ case QE_CLK3: clock_bits = 5; break;
+ case QE_CLK4: clock_bits = 6; break;
+ case QE_CLK17: clock_bits = 7; break;
+ case QE_CLK18: clock_bits = 8; break;
+ case QE_CLK7: clock_bits = 9; break;
+ case QE_CLK8: clock_bits = 10; break;
+ case QE_CLK16: clock_bits = 11; break;
+ default: break;
+ }
+ break;
+ case 4:
+ switch (clock) {
+ case QE_BRG13: clock_bits = 1; break;
+ case QE_BRG14: clock_bits = 2; break;
+ case QE_BRG15: clock_bits = 3; break;
+ case QE_BRG16: clock_bits = 4; break;
+ case QE_CLK5: clock_bits = 5; break;
+ case QE_CLK6: clock_bits = 6; break;
+ case QE_CLK21: clock_bits = 7; break;
+ case QE_CLK22: clock_bits = 8; break;
+ case QE_CLK7: clock_bits = 9; break;
+ case QE_CLK8: clock_bits = 10; break;
+ case QE_CLK16: clock_bits = 11; break;
+ default: break;
+ }
+ break;
+ default: break;
+ }
+
+ /* Check for invalid combination of clock and UCC number */
+ if (!clock_bits)
+ return -ENOENT;
+
+ if (mode == COMM_DIR_RX)
+ shift += 4;
+
+ clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+ clock_bits << shift);
+
+ return 0;
+}
diff --git a/drivers/soc/fsl/qe/ucc_fast.c b/drivers/soc/fsl/qe/ucc_fast.c
new file mode 100644
index 000000000..a7689310f
--- /dev/null
+++ b/drivers/soc/fsl/qe/ucc_fast.c
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC Fast API Set - UCC Fast specific routines implementations.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/export.h>
+
+#include <asm/io.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#include <soc/fsl/qe/ucc.h>
+#include <soc/fsl/qe/ucc_fast.h>
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
+{
+ printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
+ printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
+
+ printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+ printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+ printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+ printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+ printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+ printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+ printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n",
+ &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
+ printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+ printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+ printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+ printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
+ printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+ printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+ printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+ printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+ printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+ printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+ printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
+ &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
+}
+EXPORT_SYMBOL(ucc_fast_dump_regs);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
+{
+ switch (uccf_num) {
+ case 0: return QE_CR_SUBBLOCK_UCCFAST1;
+ case 1: return QE_CR_SUBBLOCK_UCCFAST2;
+ case 2: return QE_CR_SUBBLOCK_UCCFAST3;
+ case 3: return QE_CR_SUBBLOCK_UCCFAST4;
+ case 4: return QE_CR_SUBBLOCK_UCCFAST5;
+ case 5: return QE_CR_SUBBLOCK_UCCFAST6;
+ case 6: return QE_CR_SUBBLOCK_UCCFAST7;
+ case 7: return QE_CR_SUBBLOCK_UCCFAST8;
+ default: return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
+
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
+{
+ out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+}
+EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
+
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+ struct ucc_fast __iomem *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr |= UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr |= UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 1;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+EXPORT_SYMBOL(ucc_fast_enable);
+
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+ struct ucc_fast __iomem *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr &= ~UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr &= ~UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 0;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+EXPORT_SYMBOL(ucc_fast_disable);
+
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
+{
+ struct ucc_fast_private *uccf;
+ struct ucc_fast __iomem *uf_regs;
+ u32 gumr;
+ int ret;
+
+ if (!uf_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+ printk(KERN_ERR "%s: illegal UCC number\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Check that 'max_rx_buf_length' is properly aligned (4). */
+ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Validate Virtual Fifo register values */
+ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
+ printk(KERN_ERR "%s: urfs is too small\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
+ return -EINVAL;
+ }
+
+ if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
+ return -EINVAL;
+ }
+
+ uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
+ if (!uccf) {
+ printk(KERN_ERR "%s: Cannot allocate private data\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ /* Fill fast UCC structure */
+ uccf->uf_info = uf_info;
+ /* Set the PHY base address */
+ uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
+ if (uccf->uf_regs == NULL) {
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+ kfree(uccf);
+ return -ENOMEM;
+ }
+
+ uccf->enabled_tx = 0;
+ uccf->enabled_rx = 0;
+ uccf->stopped_tx = 0;
+ uccf->stopped_rx = 0;
+ uf_regs = uccf->uf_regs;
+ uccf->p_ucce = &uf_regs->ucce;
+ uccf->p_uccm = &uf_regs->uccm;
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+ uccf->p_utodr = &uf_regs->utodr;
+#endif
+#ifdef STATISTICS
+ uccf->tx_frames = 0;
+ uccf->rx_frames = 0;
+ uccf->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Set UCC to fast type */
+ ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
+ ucc_fast_free(uccf);
+ return ret;
+ }
+
+ uccf->mrblr = uf_info->max_rx_buf_length;
+
+ /* Set GUMR */
+ /* For more details see the hardware spec. */
+ gumr = uf_info->ttx_trx;
+ if (uf_info->tci)
+ gumr |= UCC_FAST_GUMR_TCI;
+ if (uf_info->cdp)
+ gumr |= UCC_FAST_GUMR_CDP;
+ if (uf_info->ctsp)
+ gumr |= UCC_FAST_GUMR_CTSP;
+ if (uf_info->cds)
+ gumr |= UCC_FAST_GUMR_CDS;
+ if (uf_info->ctss)
+ gumr |= UCC_FAST_GUMR_CTSS;
+ if (uf_info->txsy)
+ gumr |= UCC_FAST_GUMR_TXSY;
+ if (uf_info->rsyn)
+ gumr |= UCC_FAST_GUMR_RSYN;
+ gumr |= uf_info->synl;
+ if (uf_info->rtsm)
+ gumr |= UCC_FAST_GUMR_RTSM;
+ gumr |= uf_info->renc;
+ if (uf_info->revd)
+ gumr |= UCC_FAST_GUMR_REVD;
+ gumr |= uf_info->tenc;
+ gumr |= uf_info->tcrc;
+ gumr |= uf_info->mode;
+ out_be32(&uf_regs->gumr, gumr);
+
+ /* Allocate memory for Tx Virtual Fifo */
+ uccf->ucc_fast_tx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+ printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
+ __func__);
+ uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Allocate memory for Rx Virtual Fifo */
+ uccf->ucc_fast_rx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->urfs +
+ UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+ printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
+ __func__);
+ uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Set Virtual Fifo registers */
+ out_be16(&uf_regs->urfs, uf_info->urfs);
+ out_be16(&uf_regs->urfet, uf_info->urfet);
+ out_be16(&uf_regs->urfset, uf_info->urfset);
+ out_be16(&uf_regs->utfs, uf_info->utfs);
+ out_be16(&uf_regs->utfet, uf_info->utfet);
+ out_be16(&uf_regs->utftt, uf_info->utftt);
+ /* utfb, urfb are offsets from MURAM base */
+ out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
+ out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!uf_info->tsa) {
+ /* Rx clock routing */
+ if ((uf_info->rx_clock != QE_CLK_NONE) &&
+ ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
+ COMM_DIR_RX)) {
+ printk(KERN_ERR "%s: illegal value for RX clock\n",
+ __func__);
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ /* Tx clock routing */
+ if ((uf_info->tx_clock != QE_CLK_NONE) &&
+ ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
+ COMM_DIR_TX)) {
+ printk(KERN_ERR "%s: illegal value for TX clock\n",
+ __func__);
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ }
+
+ /* Set interrupt mask register at UCC level. */
+ out_be32(&uf_regs->uccm, uf_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level,
+ * otherwise, old garbage may come through
+ * as soon as the dam is opened. */
+
+ /* Writing '1' clears */
+ out_be32(&uf_regs->ucce, 0xffffffff);
+
+ *uccf_ret = uccf;
+ return 0;
+}
+EXPORT_SYMBOL(ucc_fast_init);
+
+void ucc_fast_free(struct ucc_fast_private * uccf)
+{
+ if (!uccf)
+ return;
+
+ if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
+
+ if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ if (uccf->uf_regs)
+ iounmap(uccf->uf_regs);
+
+ kfree(uccf);
+}
+EXPORT_SYMBOL(ucc_fast_free);
diff --git a/drivers/soc/fsl/qe/ucc_slow.c b/drivers/soc/fsl/qe/ucc_slow.c
new file mode 100644
index 000000000..9334bdbd9
--- /dev/null
+++ b/drivers/soc/fsl/qe/ucc_slow.c
@@ -0,0 +1,374 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC Slow API Set - UCC Slow specific routines implementations.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/export.h>
+
+#include <asm/io.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#include <soc/fsl/qe/ucc.h>
+#include <soc/fsl/qe/ucc_slow.h>
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
+{
+ switch (uccs_num) {
+ case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
+ case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
+ case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
+ case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
+ case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
+ case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
+ case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
+ case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
+ default: return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock);
+
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
+ QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+EXPORT_SYMBOL(ucc_slow_graceful_stop_tx);
+
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+EXPORT_SYMBOL(ucc_slow_stop_tx);
+
+void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
+{
+ struct ucc_slow_info *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+EXPORT_SYMBOL(ucc_slow_restart_tx);
+
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+ struct ucc_slow *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 1;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+EXPORT_SYMBOL(ucc_slow_enable);
+
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+ struct ucc_slow *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 0;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+EXPORT_SYMBOL(ucc_slow_disable);
+
+/* Initialize the UCC for Slow operations
+ *
+ * The caller should initialize the following us_info
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
+{
+ struct ucc_slow_private *uccs;
+ u32 i;
+ struct ucc_slow __iomem *us_regs;
+ u32 gumr;
+ struct qe_bd *bd;
+ u32 id;
+ u32 command;
+ int ret = 0;
+
+ if (!us_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
+ printk(KERN_ERR "%s: illegal UCC number\n", __func__);
+ return -EINVAL;
+ }
+
+ /*
+ * Set mrblr
+ * Check that 'max_rx_buf_length' is properly aligned (4), unless
+ * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
+ * case when QE accepts 32 bits at a time.
+ */
+ if ((!us_info->rfw) &&
+ (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
+ printk(KERN_ERR "max_rx_buf_length not aligned.\n");
+ return -EINVAL;
+ }
+
+ uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
+ if (!uccs) {
+ printk(KERN_ERR "%s: Cannot allocate private data\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ /* Fill slow UCC structure */
+ uccs->us_info = us_info;
+ /* Set the PHY base address */
+ uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
+ if (uccs->us_regs == NULL) {
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+ kfree(uccs);
+ return -ENOMEM;
+ }
+
+ uccs->saved_uccm = 0;
+ uccs->p_rx_frame = 0;
+ us_regs = uccs->us_regs;
+ uccs->p_ucce = (u16 *) & (us_regs->ucce);
+ uccs->p_uccm = (u16 *) & (us_regs->uccm);
+#ifdef STATISTICS
+ uccs->rx_frames = 0;
+ uccs->tx_frames = 0;
+ uccs->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Get PRAM base */
+ uccs->us_pram_offset =
+ qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
+ if (IS_ERR_VALUE(uccs->us_pram_offset)) {
+ printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
+ uccs->us_pram_offset);
+
+ uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
+
+ /* Set UCC to slow type */
+ ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot set UCC type", __func__);
+ ucc_slow_free(uccs);
+ return ret;
+ }
+
+ out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
+
+ INIT_LIST_HEAD(&uccs->confQ);
+
+ /* Allocate BDs. */
+ uccs->rx_base_offset =
+ qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
+ QE_ALIGNMENT_OF_BD);
+ if (IS_ERR_VALUE(uccs->rx_base_offset)) {
+ printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
+ us_info->rx_bd_ring_len);
+ uccs->rx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ uccs->tx_base_offset =
+ qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
+ QE_ALIGNMENT_OF_BD);
+ if (IS_ERR_VALUE(uccs->tx_base_offset)) {
+ printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
+ uccs->tx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ /* Init Tx bds */
+ bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
+ for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
+ /* clear bd buffer */
+ out_be32(&bd->buf, 0);
+ /* set bd status and length */
+ out_be32((u32 *) bd, 0);
+ bd++;
+ }
+ /* for last BD set Wrap bit */
+ out_be32(&bd->buf, 0);
+ out_be32((u32 *) bd, cpu_to_be32(T_W));
+
+ /* Init Rx bds */
+ bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
+ for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
+ /* set bd status and length */
+ out_be32((u32*)bd, 0);
+ /* clear bd buffer */
+ out_be32(&bd->buf, 0);
+ bd++;
+ }
+ /* for last BD set Wrap bit */
+ out_be32((u32*)bd, cpu_to_be32(R_W));
+ out_be32(&bd->buf, 0);
+
+ /* Set GUMR (For more details see the hardware spec.). */
+ /* gumr_h */
+ gumr = us_info->tcrc;
+ if (us_info->cdp)
+ gumr |= UCC_SLOW_GUMR_H_CDP;
+ if (us_info->ctsp)
+ gumr |= UCC_SLOW_GUMR_H_CTSP;
+ if (us_info->cds)
+ gumr |= UCC_SLOW_GUMR_H_CDS;
+ if (us_info->ctss)
+ gumr |= UCC_SLOW_GUMR_H_CTSS;
+ if (us_info->tfl)
+ gumr |= UCC_SLOW_GUMR_H_TFL;
+ if (us_info->rfw)
+ gumr |= UCC_SLOW_GUMR_H_RFW;
+ if (us_info->txsy)
+ gumr |= UCC_SLOW_GUMR_H_TXSY;
+ if (us_info->rtsm)
+ gumr |= UCC_SLOW_GUMR_H_RTSM;
+ out_be32(&us_regs->gumr_h, gumr);
+
+ /* gumr_l */
+ gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
+ us_info->diag | us_info->mode;
+ if (us_info->tci)
+ gumr |= UCC_SLOW_GUMR_L_TCI;
+ if (us_info->rinv)
+ gumr |= UCC_SLOW_GUMR_L_RINV;
+ if (us_info->tinv)
+ gumr |= UCC_SLOW_GUMR_L_TINV;
+ if (us_info->tend)
+ gumr |= UCC_SLOW_GUMR_L_TEND;
+ out_be32(&us_regs->gumr_l, gumr);
+
+ /* Function code registers */
+
+ /* if the data is in cachable memory, the 'global' */
+ /* in the function code should be set. */
+ uccs->us_pram->tbmr = UCC_BMR_BO_BE;
+ uccs->us_pram->rbmr = UCC_BMR_BO_BE;
+
+ /* rbase, tbase are offsets from MURAM base */
+ out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset);
+ out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!us_info->tsa) {
+ /* Rx clock routing */
+ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
+ COMM_DIR_RX)) {
+ printk(KERN_ERR "%s: illegal value for RX clock\n",
+ __func__);
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ /* Tx clock routing */
+ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
+ COMM_DIR_TX)) {
+ printk(KERN_ERR "%s: illegal value for TX clock\n",
+ __func__);
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ }
+
+ /* Set interrupt mask register at UCC level. */
+ out_be16(&us_regs->uccm, us_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level,
+ * otherwise, old garbage may come through
+ * as soon as the dam is opened. */
+
+ /* Writing '1' clears */
+ out_be16(&us_regs->ucce, 0xffff);
+
+ /* Issue QE Init command */
+ if (us_info->init_tx && us_info->init_rx)
+ command = QE_INIT_TX_RX;
+ else if (us_info->init_tx)
+ command = QE_INIT_TX;
+ else
+ command = QE_INIT_RX; /* We know at least one is TRUE */
+
+ qe_issue_cmd(command, id, us_info->protocol, 0);
+
+ *uccs_ret = uccs;
+ return 0;
+}
+EXPORT_SYMBOL(ucc_slow_init);
+
+void ucc_slow_free(struct ucc_slow_private * uccs)
+{
+ if (!uccs)
+ return;
+
+ if (uccs->rx_base_offset)
+ qe_muram_free(uccs->rx_base_offset);
+
+ if (uccs->tx_base_offset)
+ qe_muram_free(uccs->tx_base_offset);
+
+ if (uccs->us_pram)
+ qe_muram_free(uccs->us_pram_offset);
+
+ if (uccs->us_regs)
+ iounmap(uccs->us_regs);
+
+ kfree(uccs);
+}
+EXPORT_SYMBOL(ucc_slow_free);
+
diff --git a/drivers/soc/fsl/qe/usb.c b/drivers/soc/fsl/qe/usb.c
new file mode 100644
index 000000000..111f7ab80
--- /dev/null
+++ b/drivers/soc/fsl/qe/usb.c
@@ -0,0 +1,56 @@
+/*
+ * QE USB routines
+ *
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ * Shlomi Gridish <gridish@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+int qe_usb_clock_set(enum qe_clock clk, int rate)
+{
+ struct qe_mux __iomem *mux = &qe_immr->qmx;
+ unsigned long flags;
+ u32 val;
+
+ switch (clk) {
+ case QE_CLK3: val = QE_CMXGCR_USBCS_CLK3; break;
+ case QE_CLK5: val = QE_CMXGCR_USBCS_CLK5; break;
+ case QE_CLK7: val = QE_CMXGCR_USBCS_CLK7; break;
+ case QE_CLK9: val = QE_CMXGCR_USBCS_CLK9; break;
+ case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break;
+ case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break;
+ case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break;
+ case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break;
+ case QE_BRG9: val = QE_CMXGCR_USBCS_BRG9; break;
+ case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break;
+ default:
+ pr_err("%s: requested unknown clock %d\n", __func__, clk);
+ return -EINVAL;
+ }
+
+ if (qe_clock_is_brg(clk))
+ qe_setbrg(clk, rate, 1);
+
+ spin_lock_irqsave(&cmxgcr_lock, flags);
+
+ clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
+
+ spin_unlock_irqrestore(&cmxgcr_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(qe_usb_clock_set);
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 4d4203c89..0221387e5 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -15,12 +15,13 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/regmap.h>
#include <linux/soc/mediatek/infracfg.h>
+#include <linux/regulator/consumer.h>
#include <dt-bindings/power/mt8173-power.h>
#define SPM_VDE_PWR_CON 0x0210
@@ -179,6 +180,7 @@ struct scp_domain {
u32 sram_pdn_ack_bits;
u32 bus_prot_mask;
bool active_wakeup;
+ struct regulator *supply;
};
struct scp {
@@ -221,6 +223,12 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
int ret;
int i;
+ if (scpd->supply) {
+ ret = regulator_enable(scpd->supply);
+ if (ret)
+ return ret;
+ }
+
for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) {
ret = clk_prepare_enable(scpd->clk[i]);
if (ret) {
@@ -299,6 +307,9 @@ err_pwr_ack:
clk_disable_unprepare(scpd->clk[i]);
}
err_clk:
+ if (scpd->supply)
+ regulator_disable(scpd->supply);
+
dev_err(scp->dev, "Failed to power on domain %s\n", genpd->name);
return ret;
@@ -379,6 +390,9 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++)
clk_disable_unprepare(scpd->clk[i]);
+ if (scpd->supply)
+ regulator_disable(scpd->supply);
+
return 0;
out:
@@ -448,6 +462,19 @@ static int __init scpsys_probe(struct platform_device *pdev)
return PTR_ERR(scp->infracfg);
}
+ for (i = 0; i < NUM_DOMAINS; i++) {
+ struct scp_domain *scpd = &scp->domains[i];
+ const struct scp_domain_data *data = &scp_domain_data[i];
+
+ scpd->supply = devm_regulator_get_optional(&pdev->dev, data->name);
+ if (IS_ERR(scpd->supply)) {
+ if (PTR_ERR(scpd->supply) == -ENODEV)
+ scpd->supply = NULL;
+ else
+ return PTR_ERR(scpd->supply);
+ }
+ }
+
pd_data->num_domains = NUM_DOMAINS;
for (i = 0; i < NUM_DOMAINS; i++) {
@@ -521,5 +548,4 @@ static struct platform_driver scpsys_drv = {
.of_match_table = of_match_ptr(of_scpsys_match_tbl),
},
};
-
-module_platform_driver_probe(scpsys_drv, scpsys_probe);
+builtin_platform_driver_probe(scpsys_drv, scpsys_probe);
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index eec76141d..461b387d0 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -13,6 +13,7 @@ config QCOM_GSBI
config QCOM_PM
bool "Qualcomm Power Management"
depends on ARCH_QCOM && !ARM64
+ select ARM_CPU_SUSPEND
select QCOM_SCM
help
QCOM Platform specific power driver to manage cores and L2 low power
@@ -49,3 +50,29 @@ config QCOM_SMD_RPM
Say M here if you want to include support for the Qualcomm RPM as a
module. This will build a module called "qcom-smd-rpm".
+
+config QCOM_SMEM_STATE
+ bool
+
+config QCOM_SMP2P
+ tristate "Qualcomm Shared Memory Point to Point support"
+ depends on QCOM_SMEM
+ select QCOM_SMEM_STATE
+ help
+ Say yes here to support the Qualcomm Shared Memory Point to Point
+ protocol.
+
+config QCOM_SMSM
+ tristate "Qualcomm Shared Memory State Machine"
+ depends on QCOM_SMEM
+ select QCOM_SMEM_STATE
+ help
+ Say yes here to support the Qualcomm Shared Memory State Machine.
+ The state machine is represented by bits in shared memory.
+
+config QCOM_WCNSS_CTRL
+ tristate "Qualcomm WCNSS control driver"
+ depends on QCOM_SMD
+ help
+ Client driver for the WCNSS_CTRL SMD channel, used to download nv
+ firmware to a newly booted WCNSS chip.
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 10a93d168..fdd664edf 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -3,3 +3,7 @@ obj-$(CONFIG_QCOM_PM) += spm.o
obj-$(CONFIG_QCOM_SMD) += smd.o
obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o
obj-$(CONFIG_QCOM_SMEM) += smem.o
+obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
+obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
+obj-$(CONFIG_QCOM_SMSM) += smsm.o
+obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index 2969321e1..731fa066f 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -219,6 +219,8 @@ static void qcom_smd_rpm_remove(struct qcom_smd_device *sdev)
}
static const struct of_device_id qcom_smd_rpm_of_match[] = {
+ { .compatible = "qcom,rpm-apq8084" },
+ { .compatible = "qcom,rpm-msm8916" },
{ .compatible = "qcom,rpm-msm8974" },
{}
};
diff --git a/drivers/soc/qcom/smd.c b/drivers/soc/qcom/smd.c
index 86b598cff..498fd0581 100644
--- a/drivers/soc/qcom/smd.c
+++ b/drivers/soc/qcom/smd.c
@@ -434,20 +434,15 @@ static void smd_copy_to_fifo(void __iomem *dst,
/*
* Copy count bytes of data using 32bit accesses, if that is required.
*/
-static void smd_copy_from_fifo(void *_dst,
- const void __iomem *_src,
+static void smd_copy_from_fifo(void *dst,
+ const void __iomem *src,
size_t count,
bool word_aligned)
{
- u32 *dst = (u32 *)_dst;
- u32 *src = (u32 *)_src;
-
if (word_aligned) {
- count /= sizeof(u32);
- while (count--)
- *dst++ = __raw_readl(src++);
+ __ioread32_copy(dst, src, count / sizeof(u32));
} else {
- memcpy_fromio(_dst, _src, count);
+ memcpy_fromio(dst, src, count);
}
}
diff --git a/drivers/soc/qcom/smem_state.c b/drivers/soc/qcom/smem_state.c
new file mode 100644
index 000000000..54261decb
--- /dev/null
+++ b/drivers/soc/qcom/smem_state.c
@@ -0,0 +1,201 @@
+/*
+ * Copyright (c) 2015, Sony Mobile Communications Inc.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smem_state.h>
+
+static LIST_HEAD(smem_states);
+static DEFINE_MUTEX(list_lock);
+
+/**
+ * struct qcom_smem_state - state context
+ * @refcount: refcount for the state
+ * @orphan: boolean indicator that this state has been unregistered
+ * @list: entry in smem_states list
+ * @of_node: of_node to use for matching the state in DT
+ * @priv: implementation private data
+ * @ops: ops for the state
+ */
+struct qcom_smem_state {
+ struct kref refcount;
+ bool orphan;
+
+ struct list_head list;
+ struct device_node *of_node;
+
+ void *priv;
+
+ struct qcom_smem_state_ops ops;
+};
+
+/**
+ * qcom_smem_state_update_bits() - update the masked bits in state with value
+ * @state: state handle acquired by calling qcom_smem_state_get()
+ * @mask: bit mask for the change
+ * @value: new value for the masked bits
+ *
+ * Returns 0 on success, otherwise negative errno.
+ */
+int qcom_smem_state_update_bits(struct qcom_smem_state *state,
+ u32 mask,
+ u32 value)
+{
+ if (state->orphan)
+ return -ENXIO;
+
+ if (!state->ops.update_bits)
+ return -ENOTSUPP;
+
+ return state->ops.update_bits(state->priv, mask, value);
+}
+EXPORT_SYMBOL_GPL(qcom_smem_state_update_bits);
+
+static struct qcom_smem_state *of_node_to_state(struct device_node *np)
+{
+ struct qcom_smem_state *state;
+
+ mutex_lock(&list_lock);
+
+ list_for_each_entry(state, &smem_states, list) {
+ if (state->of_node == np) {
+ kref_get(&state->refcount);
+ goto unlock;
+ }
+ }
+ state = ERR_PTR(-EPROBE_DEFER);
+
+unlock:
+ mutex_unlock(&list_lock);
+
+ return state;
+}
+
+/**
+ * qcom_smem_state_get() - acquire handle to a state
+ * @dev: client device pointer
+ * @con_id: name of the state to lookup
+ * @bit: flags from the state reference, indicating which bit's affected
+ *
+ * Returns handle to the state, or ERR_PTR(). qcom_smem_state_put() must be
+ * called to release the returned state handle.
+ */
+struct qcom_smem_state *qcom_smem_state_get(struct device *dev,
+ const char *con_id,
+ unsigned *bit)
+{
+ struct qcom_smem_state *state;
+ struct of_phandle_args args;
+ int index = 0;
+ int ret;
+
+ if (con_id) {
+ index = of_property_match_string(dev->of_node,
+ "qcom,state-names",
+ con_id);
+ if (index < 0) {
+ dev_err(dev, "missing qcom,state-names\n");
+ return ERR_PTR(index);
+ }
+ }
+
+ ret = of_parse_phandle_with_args(dev->of_node,
+ "qcom,state",
+ "#qcom,state-cells",
+ index,
+ &args);
+ if (ret) {
+ dev_err(dev, "failed to parse qcom,state property\n");
+ return ERR_PTR(ret);
+ }
+
+ if (args.args_count != 1) {
+ dev_err(dev, "invalid #qcom,state-cells\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ state = of_node_to_state(args.np);
+ if (IS_ERR(state))
+ goto put;
+
+ *bit = args.args[0];
+
+put:
+ of_node_put(args.np);
+ return state;
+}
+EXPORT_SYMBOL_GPL(qcom_smem_state_get);
+
+static void qcom_smem_state_release(struct kref *ref)
+{
+ struct qcom_smem_state *state = container_of(ref, struct qcom_smem_state, refcount);
+
+ list_del(&state->list);
+ kfree(state);
+}
+
+/**
+ * qcom_smem_state_put() - release state handle
+ * @state: state handle to be released
+ */
+void qcom_smem_state_put(struct qcom_smem_state *state)
+{
+ mutex_lock(&list_lock);
+ kref_put(&state->refcount, qcom_smem_state_release);
+ mutex_unlock(&list_lock);
+}
+EXPORT_SYMBOL_GPL(qcom_smem_state_put);
+
+/**
+ * qcom_smem_state_register() - register a new state
+ * @of_node: of_node used for matching client lookups
+ * @ops: implementation ops
+ * @priv: implementation specific private data
+ */
+struct qcom_smem_state *qcom_smem_state_register(struct device_node *of_node,
+ const struct qcom_smem_state_ops *ops,
+ void *priv)
+{
+ struct qcom_smem_state *state;
+
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return ERR_PTR(-ENOMEM);
+
+ kref_init(&state->refcount);
+
+ state->of_node = of_node;
+ state->ops = *ops;
+ state->priv = priv;
+
+ mutex_lock(&list_lock);
+ list_add(&state->list, &smem_states);
+ mutex_unlock(&list_lock);
+
+ return state;
+}
+EXPORT_SYMBOL_GPL(qcom_smem_state_register);
+
+/**
+ * qcom_smem_state_unregister() - unregister a registered state
+ * @state: state handle to be unregistered
+ */
+void qcom_smem_state_unregister(struct qcom_smem_state *state)
+{
+ state->orphan = true;
+ qcom_smem_state_put(state);
+}
+EXPORT_SYMBOL_GPL(qcom_smem_state_unregister);
diff --git a/drivers/soc/qcom/smp2p.c b/drivers/soc/qcom/smp2p.c
new file mode 100644
index 000000000..f1eed7f9d
--- /dev/null
+++ b/drivers/soc/qcom/smp2p.c
@@ -0,0 +1,578 @@
+/*
+ * Copyright (c) 2015, Sony Mobile Communications AB.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/soc/qcom/smem.h>
+#include <linux/soc/qcom/smem_state.h>
+#include <linux/spinlock.h>
+
+/*
+ * The Shared Memory Point to Point (SMP2P) protocol facilitates communication
+ * of a single 32-bit value between two processors. Each value has a single
+ * writer (the local side) and a single reader (the remote side). Values are
+ * uniquely identified in the system by the directed edge (local processor ID
+ * to remote processor ID) and a string identifier.
+ *
+ * Each processor is responsible for creating the outgoing SMEM items and each
+ * item is writable by the local processor and readable by the remote
+ * processor. By using two separate SMEM items that are single-reader and
+ * single-writer, SMP2P does not require any remote locking mechanisms.
+ *
+ * The driver uses the Linux GPIO and interrupt framework to expose a virtual
+ * GPIO for each outbound entry and a virtual interrupt controller for each
+ * inbound entry.
+ */
+
+#define SMP2P_MAX_ENTRY 16
+#define SMP2P_MAX_ENTRY_NAME 16
+
+#define SMP2P_FEATURE_SSR_ACK 0x1
+
+#define SMP2P_MAGIC 0x504d5324
+
+/**
+ * struct smp2p_smem_item - in memory communication structure
+ * @magic: magic number
+ * @version: version - must be 1
+ * @features: features flag - currently unused
+ * @local_pid: processor id of sending end
+ * @remote_pid: processor id of receiving end
+ * @total_entries: number of entries - always SMP2P_MAX_ENTRY
+ * @valid_entries: number of allocated entries
+ * @flags:
+ * @entries: individual communication entries
+ * @name: name of the entry
+ * @value: content of the entry
+ */
+struct smp2p_smem_item {
+ u32 magic;
+ u8 version;
+ unsigned features:24;
+ u16 local_pid;
+ u16 remote_pid;
+ u16 total_entries;
+ u16 valid_entries;
+ u32 flags;
+
+ struct {
+ u8 name[SMP2P_MAX_ENTRY_NAME];
+ u32 value;
+ } entries[SMP2P_MAX_ENTRY];
+} __packed;
+
+/**
+ * struct smp2p_entry - driver context matching one entry
+ * @node: list entry to keep track of allocated entries
+ * @smp2p: reference to the device driver context
+ * @name: name of the entry, to match against smp2p_smem_item
+ * @value: pointer to smp2p_smem_item entry value
+ * @last_value: last handled value
+ * @domain: irq_domain for inbound entries
+ * @irq_enabled:bitmap to track enabled irq bits
+ * @irq_rising: bitmap to mark irq bits for rising detection
+ * @irq_falling:bitmap to mark irq bits for falling detection
+ * @state: smem state handle
+ * @lock: spinlock to protect read-modify-write of the value
+ */
+struct smp2p_entry {
+ struct list_head node;
+ struct qcom_smp2p *smp2p;
+
+ const char *name;
+ u32 *value;
+ u32 last_value;
+
+ struct irq_domain *domain;
+ DECLARE_BITMAP(irq_enabled, 32);
+ DECLARE_BITMAP(irq_rising, 32);
+ DECLARE_BITMAP(irq_falling, 32);
+
+ struct qcom_smem_state *state;
+
+ spinlock_t lock;
+};
+
+#define SMP2P_INBOUND 0
+#define SMP2P_OUTBOUND 1
+
+/**
+ * struct qcom_smp2p - device driver context
+ * @dev: device driver handle
+ * @in: pointer to the inbound smem item
+ * @smem_items: ids of the two smem items
+ * @valid_entries: already scanned inbound entries
+ * @local_pid: processor id of the inbound edge
+ * @remote_pid: processor id of the outbound edge
+ * @ipc_regmap: regmap for the outbound ipc
+ * @ipc_offset: offset within the regmap
+ * @ipc_bit: bit in regmap@offset to kick to signal remote processor
+ * @inbound: list of inbound entries
+ * @outbound: list of outbound entries
+ */
+struct qcom_smp2p {
+ struct device *dev;
+
+ struct smp2p_smem_item *in;
+ struct smp2p_smem_item *out;
+
+ unsigned smem_items[SMP2P_OUTBOUND + 1];
+
+ unsigned valid_entries;
+
+ unsigned local_pid;
+ unsigned remote_pid;
+
+ struct regmap *ipc_regmap;
+ int ipc_offset;
+ int ipc_bit;
+
+ struct list_head inbound;
+ struct list_head outbound;
+};
+
+static void qcom_smp2p_kick(struct qcom_smp2p *smp2p)
+{
+ /* Make sure any updated data is written before the kick */
+ wmb();
+ regmap_write(smp2p->ipc_regmap, smp2p->ipc_offset, BIT(smp2p->ipc_bit));
+}
+
+/**
+ * qcom_smp2p_intr() - interrupt handler for incoming notifications
+ * @irq: unused
+ * @data: smp2p driver context
+ *
+ * Handle notifications from the remote side to handle newly allocated entries
+ * or any changes to the state bits of existing entries.
+ */
+static irqreturn_t qcom_smp2p_intr(int irq, void *data)
+{
+ struct smp2p_smem_item *in;
+ struct smp2p_entry *entry;
+ struct qcom_smp2p *smp2p = data;
+ unsigned smem_id = smp2p->smem_items[SMP2P_INBOUND];
+ unsigned pid = smp2p->remote_pid;
+ size_t size;
+ int irq_pin;
+ u32 status;
+ char buf[SMP2P_MAX_ENTRY_NAME];
+ u32 val;
+ int i;
+
+ in = smp2p->in;
+
+ /* Acquire smem item, if not already found */
+ if (!in) {
+ in = qcom_smem_get(pid, smem_id, &size);
+ if (IS_ERR(in)) {
+ dev_err(smp2p->dev,
+ "Unable to acquire remote smp2p item\n");
+ return IRQ_HANDLED;
+ }
+
+ smp2p->in = in;
+ }
+
+ /* Match newly created entries */
+ for (i = smp2p->valid_entries; i < in->valid_entries; i++) {
+ list_for_each_entry(entry, &smp2p->inbound, node) {
+ memcpy_fromio(buf, in->entries[i].name, sizeof(buf));
+ if (!strcmp(buf, entry->name)) {
+ entry->value = &in->entries[i].value;
+ break;
+ }
+ }
+ }
+ smp2p->valid_entries = i;
+
+ /* Fire interrupts based on any value changes */
+ list_for_each_entry(entry, &smp2p->inbound, node) {
+ /* Ignore entries not yet allocated by the remote side */
+ if (!entry->value)
+ continue;
+
+ val = readl(entry->value);
+
+ status = val ^ entry->last_value;
+ entry->last_value = val;
+
+ /* No changes of this entry? */
+ if (!status)
+ continue;
+
+ for_each_set_bit(i, entry->irq_enabled, 32) {
+ if (!(status & BIT(i)))
+ continue;
+
+ if ((val & BIT(i) && test_bit(i, entry->irq_rising)) ||
+ (!(val & BIT(i)) && test_bit(i, entry->irq_falling))) {
+ irq_pin = irq_find_mapping(entry->domain, i);
+ handle_nested_irq(irq_pin);
+ }
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void smp2p_mask_irq(struct irq_data *irqd)
+{
+ struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd);
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
+
+ clear_bit(irq, entry->irq_enabled);
+}
+
+static void smp2p_unmask_irq(struct irq_data *irqd)
+{
+ struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd);
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
+
+ set_bit(irq, entry->irq_enabled);
+}
+
+static int smp2p_set_irq_type(struct irq_data *irqd, unsigned int type)
+{
+ struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd);
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
+
+ if (!(type & IRQ_TYPE_EDGE_BOTH))
+ return -EINVAL;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ set_bit(irq, entry->irq_rising);
+ else
+ clear_bit(irq, entry->irq_rising);
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ set_bit(irq, entry->irq_falling);
+ else
+ clear_bit(irq, entry->irq_falling);
+
+ return 0;
+}
+
+static struct irq_chip smp2p_irq_chip = {
+ .name = "smp2p",
+ .irq_mask = smp2p_mask_irq,
+ .irq_unmask = smp2p_unmask_irq,
+ .irq_set_type = smp2p_set_irq_type,
+};
+
+static int smp2p_irq_map(struct irq_domain *d,
+ unsigned int irq,
+ irq_hw_number_t hw)
+{
+ struct smp2p_entry *entry = d->host_data;
+
+ irq_set_chip_and_handler(irq, &smp2p_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, entry);
+ irq_set_nested_thread(irq, 1);
+ irq_set_noprobe(irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops smp2p_irq_ops = {
+ .map = smp2p_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int qcom_smp2p_inbound_entry(struct qcom_smp2p *smp2p,
+ struct smp2p_entry *entry,
+ struct device_node *node)
+{
+ entry->domain = irq_domain_add_linear(node, 32, &smp2p_irq_ops, entry);
+ if (!entry->domain) {
+ dev_err(smp2p->dev, "failed to add irq_domain\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int smp2p_update_bits(void *data, u32 mask, u32 value)
+{
+ struct smp2p_entry *entry = data;
+ u32 orig;
+ u32 val;
+
+ spin_lock(&entry->lock);
+ val = orig = readl(entry->value);
+ val &= ~mask;
+ val |= value;
+ writel(val, entry->value);
+ spin_unlock(&entry->lock);
+
+ if (val != orig)
+ qcom_smp2p_kick(entry->smp2p);
+
+ return 0;
+}
+
+static const struct qcom_smem_state_ops smp2p_state_ops = {
+ .update_bits = smp2p_update_bits,
+};
+
+static int qcom_smp2p_outbound_entry(struct qcom_smp2p *smp2p,
+ struct smp2p_entry *entry,
+ struct device_node *node)
+{
+ struct smp2p_smem_item *out = smp2p->out;
+ char buf[SMP2P_MAX_ENTRY_NAME] = {};
+
+ /* Allocate an entry from the smem item */
+ strlcpy(buf, entry->name, SMP2P_MAX_ENTRY_NAME);
+ memcpy_toio(out->entries[out->valid_entries].name, buf, SMP2P_MAX_ENTRY_NAME);
+ out->valid_entries++;
+
+ /* Make the logical entry reference the physical value */
+ entry->value = &out->entries[out->valid_entries].value;
+
+ entry->state = qcom_smem_state_register(node, &smp2p_state_ops, entry);
+ if (IS_ERR(entry->state)) {
+ dev_err(smp2p->dev, "failed to register qcom_smem_state\n");
+ return PTR_ERR(entry->state);
+ }
+
+ return 0;
+}
+
+static int qcom_smp2p_alloc_outbound_item(struct qcom_smp2p *smp2p)
+{
+ struct smp2p_smem_item *out;
+ unsigned smem_id = smp2p->smem_items[SMP2P_OUTBOUND];
+ unsigned pid = smp2p->remote_pid;
+ int ret;
+
+ ret = qcom_smem_alloc(pid, smem_id, sizeof(*out));
+ if (ret < 0 && ret != -EEXIST) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(smp2p->dev,
+ "unable to allocate local smp2p item\n");
+ return ret;
+ }
+
+ out = qcom_smem_get(pid, smem_id, NULL);
+ if (IS_ERR(out)) {
+ dev_err(smp2p->dev, "Unable to acquire local smp2p item\n");
+ return PTR_ERR(out);
+ }
+
+ memset(out, 0, sizeof(*out));
+ out->magic = SMP2P_MAGIC;
+ out->local_pid = smp2p->local_pid;
+ out->remote_pid = smp2p->remote_pid;
+ out->total_entries = SMP2P_MAX_ENTRY;
+ out->valid_entries = 0;
+
+ /*
+ * Make sure the rest of the header is written before we validate the
+ * item by writing a valid version number.
+ */
+ wmb();
+ out->version = 1;
+
+ qcom_smp2p_kick(smp2p);
+
+ smp2p->out = out;
+
+ return 0;
+}
+
+static int smp2p_parse_ipc(struct qcom_smp2p *smp2p)
+{
+ struct device_node *syscon;
+ struct device *dev = smp2p->dev;
+ const char *key;
+ int ret;
+
+ syscon = of_parse_phandle(dev->of_node, "qcom,ipc", 0);
+ if (!syscon) {
+ dev_err(dev, "no qcom,ipc node\n");
+ return -ENODEV;
+ }
+
+ smp2p->ipc_regmap = syscon_node_to_regmap(syscon);
+ if (IS_ERR(smp2p->ipc_regmap))
+ return PTR_ERR(smp2p->ipc_regmap);
+
+ key = "qcom,ipc";
+ ret = of_property_read_u32_index(dev->of_node, key, 1, &smp2p->ipc_offset);
+ if (ret < 0) {
+ dev_err(dev, "no offset in %s\n", key);
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(dev->of_node, key, 2, &smp2p->ipc_bit);
+ if (ret < 0) {
+ dev_err(dev, "no bit in %s\n", key);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qcom_smp2p_probe(struct platform_device *pdev)
+{
+ struct smp2p_entry *entry;
+ struct device_node *node;
+ struct qcom_smp2p *smp2p;
+ const char *key;
+ int irq;
+ int ret;
+
+ smp2p = devm_kzalloc(&pdev->dev, sizeof(*smp2p), GFP_KERNEL);
+ if (!smp2p)
+ return -ENOMEM;
+
+ smp2p->dev = &pdev->dev;
+ INIT_LIST_HEAD(&smp2p->inbound);
+ INIT_LIST_HEAD(&smp2p->outbound);
+
+ platform_set_drvdata(pdev, smp2p);
+
+ ret = smp2p_parse_ipc(smp2p);
+ if (ret)
+ return ret;
+
+ key = "qcom,smem";
+ ret = of_property_read_u32_array(pdev->dev.of_node, key,
+ smp2p->smem_items, 2);
+ if (ret)
+ return ret;
+
+ key = "qcom,local-pid";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &smp2p->local_pid);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return -EINVAL;
+ }
+
+ key = "qcom,remote-pid";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &smp2p->remote_pid);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "unable to acquire smp2p interrupt\n");
+ return irq;
+ }
+
+ ret = qcom_smp2p_alloc_outbound_item(smp2p);
+ if (ret < 0)
+ return ret;
+
+ for_each_available_child_of_node(pdev->dev.of_node, node) {
+ entry = devm_kzalloc(&pdev->dev, sizeof(*entry), GFP_KERNEL);
+ if (!entry) {
+ ret = -ENOMEM;
+ goto unwind_interfaces;
+ }
+
+ entry->smp2p = smp2p;
+ spin_lock_init(&entry->lock);
+
+ ret = of_property_read_string(node, "qcom,entry-name", &entry->name);
+ if (ret < 0)
+ goto unwind_interfaces;
+
+ if (of_property_read_bool(node, "interrupt-controller")) {
+ ret = qcom_smp2p_inbound_entry(smp2p, entry, node);
+ if (ret < 0)
+ goto unwind_interfaces;
+
+ list_add(&entry->node, &smp2p->inbound);
+ } else {
+ ret = qcom_smp2p_outbound_entry(smp2p, entry, node);
+ if (ret < 0)
+ goto unwind_interfaces;
+
+ list_add(&entry->node, &smp2p->outbound);
+ }
+ }
+
+ /* Kick the outgoing edge after allocating entries */
+ qcom_smp2p_kick(smp2p);
+
+ ret = devm_request_threaded_irq(&pdev->dev, irq,
+ NULL, qcom_smp2p_intr,
+ IRQF_ONESHOT,
+ "smp2p", (void *)smp2p);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request interrupt\n");
+ goto unwind_interfaces;
+ }
+
+
+ return 0;
+
+unwind_interfaces:
+ list_for_each_entry(entry, &smp2p->inbound, node)
+ irq_domain_remove(entry->domain);
+
+ list_for_each_entry(entry, &smp2p->outbound, node)
+ qcom_smem_state_unregister(entry->state);
+
+ smp2p->out->valid_entries = 0;
+
+ return ret;
+}
+
+static int qcom_smp2p_remove(struct platform_device *pdev)
+{
+ struct qcom_smp2p *smp2p = platform_get_drvdata(pdev);
+ struct smp2p_entry *entry;
+
+ list_for_each_entry(entry, &smp2p->inbound, node)
+ irq_domain_remove(entry->domain);
+
+ list_for_each_entry(entry, &smp2p->outbound, node)
+ qcom_smem_state_unregister(entry->state);
+
+ smp2p->out->valid_entries = 0;
+
+ return 0;
+}
+
+static const struct of_device_id qcom_smp2p_of_match[] = {
+ { .compatible = "qcom,smp2p" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qcom_smp2p_of_match);
+
+static struct platform_driver qcom_smp2p_driver = {
+ .probe = qcom_smp2p_probe,
+ .remove = qcom_smp2p_remove,
+ .driver = {
+ .name = "qcom_smp2p",
+ .of_match_table = qcom_smp2p_of_match,
+ },
+};
+module_platform_driver(qcom_smp2p_driver);
+
+MODULE_DESCRIPTION("Qualcomm Shared Memory Point to Point driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c
new file mode 100644
index 000000000..6b777af1b
--- /dev/null
+++ b/drivers/soc/qcom/smsm.c
@@ -0,0 +1,625 @@
+/*
+ * Copyright (c) 2015, Sony Mobile Communications Inc.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/regmap.h>
+#include <linux/soc/qcom/smem.h>
+#include <linux/soc/qcom/smem_state.h>
+
+/*
+ * This driver implements the Qualcomm Shared Memory State Machine, a mechanism
+ * for communicating single bit state information to remote processors.
+ *
+ * The implementation is based on two sections of shared memory; the first
+ * holding the state bits and the second holding a matrix of subscription bits.
+ *
+ * The state bits are structured in entries of 32 bits, each belonging to one
+ * system in the SoC. The entry belonging to the local system is considered
+ * read-write, while the rest should be considered read-only.
+ *
+ * The subscription matrix consists of N bitmaps per entry, denoting interest
+ * in updates of the entry for each of the N hosts. Upon updating a state bit
+ * each host's subscription bitmap should be queried and the remote system
+ * should be interrupted if they request so.
+ *
+ * The subscription matrix is laid out in entry-major order:
+ * entry0: [host0 ... hostN]
+ * .
+ * .
+ * entryM: [host0 ... hostN]
+ *
+ * A third, optional, shared memory region might contain information regarding
+ * the number of entries in the state bitmap as well as number of columns in
+ * the subscription matrix.
+ */
+
+/*
+ * Shared memory identifiers, used to acquire handles to respective memory
+ * region.
+ */
+#define SMEM_SMSM_SHARED_STATE 85
+#define SMEM_SMSM_CPU_INTR_MASK 333
+#define SMEM_SMSM_SIZE_INFO 419
+
+/*
+ * Default sizes, in case SMEM_SMSM_SIZE_INFO is not found.
+ */
+#define SMSM_DEFAULT_NUM_ENTRIES 8
+#define SMSM_DEFAULT_NUM_HOSTS 3
+
+struct smsm_entry;
+struct smsm_host;
+
+/**
+ * struct qcom_smsm - smsm driver context
+ * @dev: smsm device pointer
+ * @local_host: column in the subscription matrix representing this system
+ * @num_hosts: number of columns in the subscription matrix
+ * @num_entries: number of entries in the state map and rows in the subscription
+ * matrix
+ * @local_state: pointer to the local processor's state bits
+ * @subscription: pointer to local processor's row in subscription matrix
+ * @state: smem state handle
+ * @lock: spinlock for read-modify-write of the outgoing state
+ * @entries: context for each of the entries
+ * @hosts: context for each of the hosts
+ */
+struct qcom_smsm {
+ struct device *dev;
+
+ u32 local_host;
+
+ u32 num_hosts;
+ u32 num_entries;
+
+ u32 *local_state;
+ u32 *subscription;
+ struct qcom_smem_state *state;
+
+ spinlock_t lock;
+
+ struct smsm_entry *entries;
+ struct smsm_host *hosts;
+};
+
+/**
+ * struct smsm_entry - per remote processor entry context
+ * @smsm: back-reference to driver context
+ * @domain: IRQ domain for this entry, if representing a remote system
+ * @irq_enabled: bitmap of which state bits IRQs are enabled
+ * @irq_rising: bitmap tracking if rising bits should be propagated
+ * @irq_falling: bitmap tracking if falling bits should be propagated
+ * @last_value: snapshot of state bits last time the interrupts where propagated
+ * @remote_state: pointer to this entry's state bits
+ * @subscription: pointer to a row in the subscription matrix representing this
+ * entry
+ */
+struct smsm_entry {
+ struct qcom_smsm *smsm;
+
+ struct irq_domain *domain;
+ DECLARE_BITMAP(irq_enabled, 32);
+ DECLARE_BITMAP(irq_rising, 32);
+ DECLARE_BITMAP(irq_falling, 32);
+ u32 last_value;
+
+ u32 *remote_state;
+ u32 *subscription;
+};
+
+/**
+ * struct smsm_host - representation of a remote host
+ * @ipc_regmap: regmap for outgoing interrupt
+ * @ipc_offset: offset in @ipc_regmap for outgoing interrupt
+ * @ipc_bit: bit in @ipc_regmap + @ipc_offset for outgoing interrupt
+ */
+struct smsm_host {
+ struct regmap *ipc_regmap;
+ int ipc_offset;
+ int ipc_bit;
+};
+
+/**
+ * smsm_update_bits() - change bit in outgoing entry and inform subscribers
+ * @data: smsm context pointer
+ * @offset: bit in the entry
+ * @value: new value
+ *
+ * Used to set and clear the bits in the outgoing/local entry and inform
+ * subscribers about the change.
+ */
+static int smsm_update_bits(void *data, u32 mask, u32 value)
+{
+ struct qcom_smsm *smsm = data;
+ struct smsm_host *hostp;
+ unsigned long flags;
+ u32 changes;
+ u32 host;
+ u32 orig;
+ u32 val;
+
+ spin_lock_irqsave(&smsm->lock, flags);
+
+ /* Update the entry */
+ val = orig = readl(smsm->local_state);
+ val &= ~mask;
+ val |= value;
+
+ /* Don't signal if we didn't change the value */
+ changes = val ^ orig;
+ if (!changes) {
+ spin_unlock_irqrestore(&smsm->lock, flags);
+ goto done;
+ }
+
+ /* Write out the new value */
+ writel(val, smsm->local_state);
+ spin_unlock_irqrestore(&smsm->lock, flags);
+
+ /* Make sure the value update is ordered before any kicks */
+ wmb();
+
+ /* Iterate over all hosts to check whom wants a kick */
+ for (host = 0; host < smsm->num_hosts; host++) {
+ hostp = &smsm->hosts[host];
+
+ val = readl(smsm->subscription + host);
+ if (val & changes && hostp->ipc_regmap) {
+ regmap_write(hostp->ipc_regmap,
+ hostp->ipc_offset,
+ BIT(hostp->ipc_bit));
+ }
+ }
+
+done:
+ return 0;
+}
+
+static const struct qcom_smem_state_ops smsm_state_ops = {
+ .update_bits = smsm_update_bits,
+};
+
+/**
+ * smsm_intr() - cascading IRQ handler for SMSM
+ * @irq: unused
+ * @data: entry related to this IRQ
+ *
+ * This function cascades an incoming interrupt from a remote system, based on
+ * the state bits and configuration.
+ */
+static irqreturn_t smsm_intr(int irq, void *data)
+{
+ struct smsm_entry *entry = data;
+ unsigned i;
+ int irq_pin;
+ u32 changed;
+ u32 val;
+
+ val = readl(entry->remote_state);
+ changed = val ^ entry->last_value;
+ entry->last_value = val;
+
+ for_each_set_bit(i, entry->irq_enabled, 32) {
+ if (!(changed & BIT(i)))
+ continue;
+
+ if (val & BIT(i)) {
+ if (test_bit(i, entry->irq_rising)) {
+ irq_pin = irq_find_mapping(entry->domain, i);
+ handle_nested_irq(irq_pin);
+ }
+ } else {
+ if (test_bit(i, entry->irq_falling)) {
+ irq_pin = irq_find_mapping(entry->domain, i);
+ handle_nested_irq(irq_pin);
+ }
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * smsm_mask_irq() - un-subscribe from cascades of IRQs of a certain staus bit
+ * @irqd: IRQ handle to be masked
+ *
+ * This un-subscribes the local CPU from interrupts upon changes to the defines
+ * status bit. The bit is also cleared from cascading.
+ */
+static void smsm_mask_irq(struct irq_data *irqd)
+{
+ struct smsm_entry *entry = irq_data_get_irq_chip_data(irqd);
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
+ struct qcom_smsm *smsm = entry->smsm;
+ u32 val;
+
+ if (entry->subscription) {
+ val = readl(entry->subscription + smsm->local_host);
+ val &= ~BIT(irq);
+ writel(val, entry->subscription + smsm->local_host);
+ }
+
+ clear_bit(irq, entry->irq_enabled);
+}
+
+/**
+ * smsm_unmask_irq() - subscribe to cascades of IRQs of a certain status bit
+ * @irqd: IRQ handle to be unmasked
+ *
+
+ * This subscribes the local CPU to interrupts upon changes to the defined
+ * status bit. The bit is also marked for cascading.
+
+ */
+static void smsm_unmask_irq(struct irq_data *irqd)
+{
+ struct smsm_entry *entry = irq_data_get_irq_chip_data(irqd);
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
+ struct qcom_smsm *smsm = entry->smsm;
+ u32 val;
+
+ set_bit(irq, entry->irq_enabled);
+
+ if (entry->subscription) {
+ val = readl(entry->subscription + smsm->local_host);
+ val |= BIT(irq);
+ writel(val, entry->subscription + smsm->local_host);
+ }
+}
+
+/**
+ * smsm_set_irq_type() - updates the requested IRQ type for the cascading
+ * @irqd: consumer interrupt handle
+ * @type: requested flags
+ */
+static int smsm_set_irq_type(struct irq_data *irqd, unsigned int type)
+{
+ struct smsm_entry *entry = irq_data_get_irq_chip_data(irqd);
+ irq_hw_number_t irq = irqd_to_hwirq(irqd);
+
+ if (!(type & IRQ_TYPE_EDGE_BOTH))
+ return -EINVAL;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ set_bit(irq, entry->irq_rising);
+ else
+ clear_bit(irq, entry->irq_rising);
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ set_bit(irq, entry->irq_falling);
+ else
+ clear_bit(irq, entry->irq_falling);
+
+ return 0;
+}
+
+static struct irq_chip smsm_irq_chip = {
+ .name = "smsm",
+ .irq_mask = smsm_mask_irq,
+ .irq_unmask = smsm_unmask_irq,
+ .irq_set_type = smsm_set_irq_type,
+};
+
+/**
+ * smsm_irq_map() - sets up a mapping for a cascaded IRQ
+ * @d: IRQ domain representing an entry
+ * @irq: IRQ to set up
+ * @hw: unused
+ */
+static int smsm_irq_map(struct irq_domain *d,
+ unsigned int irq,
+ irq_hw_number_t hw)
+{
+ struct smsm_entry *entry = d->host_data;
+
+ irq_set_chip_and_handler(irq, &smsm_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, entry);
+ irq_set_nested_thread(irq, 1);
+
+ return 0;
+}
+
+static const struct irq_domain_ops smsm_irq_ops = {
+ .map = smsm_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+/**
+ * smsm_parse_ipc() - parses a qcom,ipc-%d device tree property
+ * @smsm: smsm driver context
+ * @host_id: index of the remote host to be resolved
+ *
+ * Parses device tree to acquire the information needed for sending the
+ * outgoing interrupts to a remote host - identified by @host_id.
+ */
+static int smsm_parse_ipc(struct qcom_smsm *smsm, unsigned host_id)
+{
+ struct device_node *syscon;
+ struct device_node *node = smsm->dev->of_node;
+ struct smsm_host *host = &smsm->hosts[host_id];
+ char key[16];
+ int ret;
+
+ snprintf(key, sizeof(key), "qcom,ipc-%d", host_id);
+ syscon = of_parse_phandle(node, key, 0);
+ if (!syscon)
+ return 0;
+
+ host->ipc_regmap = syscon_node_to_regmap(syscon);
+ if (IS_ERR(host->ipc_regmap))
+ return PTR_ERR(host->ipc_regmap);
+
+ ret = of_property_read_u32_index(node, key, 1, &host->ipc_offset);
+ if (ret < 0) {
+ dev_err(smsm->dev, "no offset in %s\n", key);
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(node, key, 2, &host->ipc_bit);
+ if (ret < 0) {
+ dev_err(smsm->dev, "no bit in %s\n", key);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * smsm_inbound_entry() - parse DT and set up an entry representing a remote system
+ * @smsm: smsm driver context
+ * @entry: entry context to be set up
+ * @node: dt node containing the entry's properties
+ */
+static int smsm_inbound_entry(struct qcom_smsm *smsm,
+ struct smsm_entry *entry,
+ struct device_node *node)
+{
+ int ret;
+ int irq;
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq) {
+ dev_err(smsm->dev, "failed to parse smsm interrupt\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_threaded_irq(smsm->dev, irq,
+ NULL, smsm_intr,
+ IRQF_ONESHOT,
+ "smsm", (void *)entry);
+ if (ret) {
+ dev_err(smsm->dev, "failed to request interrupt\n");
+ return ret;
+ }
+
+ entry->domain = irq_domain_add_linear(node, 32, &smsm_irq_ops, entry);
+ if (!entry->domain) {
+ dev_err(smsm->dev, "failed to add irq_domain\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/**
+ * smsm_get_size_info() - parse the optional memory segment for sizes
+ * @smsm: smsm driver context
+ *
+ * Attempt to acquire the number of hosts and entries from the optional shared
+ * memory location. Not being able to find this segment should indicate that
+ * we're on a older system where these values was hard coded to
+ * SMSM_DEFAULT_NUM_ENTRIES and SMSM_DEFAULT_NUM_HOSTS.
+ *
+ * Returns 0 on success, negative errno on failure.
+ */
+static int smsm_get_size_info(struct qcom_smsm *smsm)
+{
+ size_t size;
+ struct {
+ u32 num_hosts;
+ u32 num_entries;
+ u32 reserved0;
+ u32 reserved1;
+ } *info;
+
+ info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_SMSM_SIZE_INFO, &size);
+ if (PTR_ERR(info) == -ENOENT || size != sizeof(*info)) {
+ dev_warn(smsm->dev, "no smsm size info, using defaults\n");
+ smsm->num_entries = SMSM_DEFAULT_NUM_ENTRIES;
+ smsm->num_hosts = SMSM_DEFAULT_NUM_HOSTS;
+ return 0;
+ } else if (IS_ERR(info)) {
+ dev_err(smsm->dev, "unable to retrieve smsm size info\n");
+ return PTR_ERR(info);
+ }
+
+ smsm->num_entries = info->num_entries;
+ smsm->num_hosts = info->num_hosts;
+
+ dev_dbg(smsm->dev,
+ "found custom size of smsm: %d entries %d hosts\n",
+ smsm->num_entries, smsm->num_hosts);
+
+ return 0;
+}
+
+static int qcom_smsm_probe(struct platform_device *pdev)
+{
+ struct device_node *local_node;
+ struct device_node *node;
+ struct smsm_entry *entry;
+ struct qcom_smsm *smsm;
+ u32 *intr_mask;
+ size_t size;
+ u32 *states;
+ u32 id;
+ int ret;
+
+ smsm = devm_kzalloc(&pdev->dev, sizeof(*smsm), GFP_KERNEL);
+ if (!smsm)
+ return -ENOMEM;
+ smsm->dev = &pdev->dev;
+ spin_lock_init(&smsm->lock);
+
+ ret = smsm_get_size_info(smsm);
+ if (ret)
+ return ret;
+
+ smsm->entries = devm_kcalloc(&pdev->dev,
+ smsm->num_entries,
+ sizeof(struct smsm_entry),
+ GFP_KERNEL);
+ if (!smsm->entries)
+ return -ENOMEM;
+
+ smsm->hosts = devm_kcalloc(&pdev->dev,
+ smsm->num_hosts,
+ sizeof(struct smsm_host),
+ GFP_KERNEL);
+ if (!smsm->hosts)
+ return -ENOMEM;
+
+ local_node = of_find_node_with_property(pdev->dev.of_node, "#qcom,state-cells");
+ if (!local_node) {
+ dev_err(&pdev->dev, "no state entry\n");
+ return -EINVAL;
+ }
+
+ of_property_read_u32(pdev->dev.of_node,
+ "qcom,local-host",
+ &smsm->local_host);
+
+ /* Parse the host properties */
+ for (id = 0; id < smsm->num_hosts; id++) {
+ ret = smsm_parse_ipc(smsm, id);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Acquire the main SMSM state vector */
+ ret = qcom_smem_alloc(QCOM_SMEM_HOST_ANY, SMEM_SMSM_SHARED_STATE,
+ smsm->num_entries * sizeof(u32));
+ if (ret < 0 && ret != -EEXIST) {
+ dev_err(&pdev->dev, "unable to allocate shared state entry\n");
+ return ret;
+ }
+
+ states = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_SMSM_SHARED_STATE, NULL);
+ if (IS_ERR(states)) {
+ dev_err(&pdev->dev, "Unable to acquire shared state entry\n");
+ return PTR_ERR(states);
+ }
+
+ /* Acquire the list of interrupt mask vectors */
+ size = smsm->num_entries * smsm->num_hosts * sizeof(u32);
+ ret = qcom_smem_alloc(QCOM_SMEM_HOST_ANY, SMEM_SMSM_CPU_INTR_MASK, size);
+ if (ret < 0 && ret != -EEXIST) {
+ dev_err(&pdev->dev, "unable to allocate smsm interrupt mask\n");
+ return ret;
+ }
+
+ intr_mask = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_SMSM_CPU_INTR_MASK, NULL);
+ if (IS_ERR(intr_mask)) {
+ dev_err(&pdev->dev, "unable to acquire shared memory interrupt mask\n");
+ return PTR_ERR(intr_mask);
+ }
+
+ /* Setup the reference to the local state bits */
+ smsm->local_state = states + smsm->local_host;
+ smsm->subscription = intr_mask + smsm->local_host * smsm->num_hosts;
+
+ /* Register the outgoing state */
+ smsm->state = qcom_smem_state_register(local_node, &smsm_state_ops, smsm);
+ if (IS_ERR(smsm->state)) {
+ dev_err(smsm->dev, "failed to register qcom_smem_state\n");
+ return PTR_ERR(smsm->state);
+ }
+
+ /* Register handlers for remote processor entries of interest. */
+ for_each_available_child_of_node(pdev->dev.of_node, node) {
+ if (!of_property_read_bool(node, "interrupt-controller"))
+ continue;
+
+ ret = of_property_read_u32(node, "reg", &id);
+ if (ret || id >= smsm->num_entries) {
+ dev_err(&pdev->dev, "invalid reg of entry\n");
+ if (!ret)
+ ret = -EINVAL;
+ goto unwind_interfaces;
+ }
+ entry = &smsm->entries[id];
+
+ entry->smsm = smsm;
+ entry->remote_state = states + id;
+
+ /* Setup subscription pointers and unsubscribe to any kicks */
+ entry->subscription = intr_mask + id * smsm->num_hosts;
+ writel(0, entry->subscription + smsm->local_host);
+
+ ret = smsm_inbound_entry(smsm, entry, node);
+ if (ret < 0)
+ goto unwind_interfaces;
+ }
+
+ platform_set_drvdata(pdev, smsm);
+
+ return 0;
+
+unwind_interfaces:
+ for (id = 0; id < smsm->num_entries; id++)
+ if (smsm->entries[id].domain)
+ irq_domain_remove(smsm->entries[id].domain);
+
+ qcom_smem_state_unregister(smsm->state);
+
+ return ret;
+}
+
+static int qcom_smsm_remove(struct platform_device *pdev)
+{
+ struct qcom_smsm *smsm = platform_get_drvdata(pdev);
+ unsigned id;
+
+ for (id = 0; id < smsm->num_entries; id++)
+ if (smsm->entries[id].domain)
+ irq_domain_remove(smsm->entries[id].domain);
+
+ qcom_smem_state_unregister(smsm->state);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_smsm_of_match[] = {
+ { .compatible = "qcom,smsm" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qcom_smsm_of_match);
+
+static struct platform_driver qcom_smsm_driver = {
+ .probe = qcom_smsm_probe,
+ .remove = qcom_smsm_remove,
+ .driver = {
+ .name = "qcom-smsm",
+ .of_match_table = qcom_smsm_of_match,
+ },
+};
+module_platform_driver(qcom_smsm_driver);
+
+MODULE_DESCRIPTION("Qualcomm Shared Memory State Machine driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index b04b05a09..5548a31e1 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -116,7 +116,7 @@ static const struct spm_reg_data spm_reg_8064_cpu = {
static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv);
-typedef int (*idle_fn)(int);
+typedef int (*idle_fn)(void);
static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops);
static inline void spm_register_write(struct spm_driver_data *drv,
@@ -179,10 +179,10 @@ static int qcom_pm_collapse(unsigned long int unused)
return -1;
}
-static int qcom_cpu_spc(int cpu)
+static int qcom_cpu_spc(void)
{
int ret;
- struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu);
+ struct spm_driver_data *drv = __this_cpu_read(cpu_spm_drv);
spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC);
ret = cpu_suspend(0, qcom_pm_collapse);
@@ -197,9 +197,9 @@ static int qcom_cpu_spc(int cpu)
return ret;
}
-static int qcom_idle_enter(int cpu, unsigned long index)
+static int qcom_idle_enter(unsigned long index)
{
- return per_cpu(qcom_idle_ops, cpu)[index](cpu);
+ return __this_cpu_read(qcom_idle_ops)[index]();
}
static const struct of_device_id qcom_idle_state_match[] __initconst = {
@@ -288,7 +288,7 @@ static struct spm_driver_data *spm_get_drv(struct platform_device *pdev,
struct spm_driver_data *drv = NULL;
struct device_node *cpu_node, *saw_node;
int cpu;
- bool found;
+ bool found = 0;
for_each_possible_cpu(cpu) {
cpu_node = of_cpu_device_node_get(cpu);
diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
new file mode 100644
index 000000000..4ca82a270
--- /dev/null
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -0,0 +1,272 @@
+/*
+ * Copyright (c) 2015, Sony Mobile Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smd.h>
+
+#define WCNSS_REQUEST_TIMEOUT (5 * HZ)
+
+#define NV_FRAGMENT_SIZE 3072
+#define NVBIN_FILE "/*(DEBLOBBED)*/"
+
+/**
+ * struct wcnss_ctrl - driver context
+ * @dev: device handle
+ * @channel: SMD channel handle
+ * @ack: completion for outstanding requests
+ * @ack_status: status of the outstanding request
+ * @download_nv_work: worker for uploading nv binary
+ */
+struct wcnss_ctrl {
+ struct device *dev;
+ struct qcom_smd_channel *channel;
+
+ struct completion ack;
+ int ack_status;
+
+ struct work_struct download_nv_work;
+};
+
+/* message types */
+enum {
+ WCNSS_VERSION_REQ = 0x01000000,
+ WCNSS_VERSION_RESP,
+ WCNSS_DOWNLOAD_NV_REQ,
+ WCNSS_DOWNLOAD_NV_RESP,
+ WCNSS_UPLOAD_CAL_REQ,
+ WCNSS_UPLOAD_CAL_RESP,
+ WCNSS_DOWNLOAD_CAL_REQ,
+ WCNSS_DOWNLOAD_CAL_RESP,
+};
+
+/**
+ * struct wcnss_msg_hdr - common packet header for requests and responses
+ * @type: packet message type
+ * @len: total length of the packet, including this header
+ */
+struct wcnss_msg_hdr {
+ u32 type;
+ u32 len;
+} __packed;
+
+/**
+ * struct wcnss_version_resp - version request response
+ * @hdr: common packet wcnss_msg_hdr header
+ */
+struct wcnss_version_resp {
+ struct wcnss_msg_hdr hdr;
+ u8 major;
+ u8 minor;
+ u8 version;
+ u8 revision;
+} __packed;
+
+/**
+ * struct wcnss_download_nv_req - firmware fragment request
+ * @hdr: common packet wcnss_msg_hdr header
+ * @seq: sequence number of this fragment
+ * @last: boolean indicator of this being the last fragment of the binary
+ * @frag_size: length of this fragment
+ * @fragment: fragment data
+ */
+struct wcnss_download_nv_req {
+ struct wcnss_msg_hdr hdr;
+ u16 seq;
+ u16 last;
+ u32 frag_size;
+ u8 fragment[];
+} __packed;
+
+/**
+ * struct wcnss_download_nv_resp - firmware download response
+ * @hdr: common packet wcnss_msg_hdr header
+ * @status: boolean to indicate success of the download
+ */
+struct wcnss_download_nv_resp {
+ struct wcnss_msg_hdr hdr;
+ u8 status;
+} __packed;
+
+/**
+ * wcnss_ctrl_smd_callback() - handler from SMD responses
+ * @qsdev: smd device handle
+ * @data: pointer to the incoming data packet
+ * @count: size of the incoming data packet
+ *
+ * Handles any incoming packets from the remote WCNSS_CTRL service.
+ */
+static int wcnss_ctrl_smd_callback(struct qcom_smd_device *qsdev,
+ const void *data,
+ size_t count)
+{
+ struct wcnss_ctrl *wcnss = dev_get_drvdata(&qsdev->dev);
+ const struct wcnss_download_nv_resp *nvresp;
+ const struct wcnss_version_resp *version;
+ const struct wcnss_msg_hdr *hdr = data;
+
+ switch (hdr->type) {
+ case WCNSS_VERSION_RESP:
+ if (count != sizeof(*version)) {
+ dev_err(wcnss->dev,
+ "invalid size of version response\n");
+ break;
+ }
+
+ version = data;
+ dev_info(wcnss->dev, "WCNSS Version %d.%d %d.%d\n",
+ version->major, version->minor,
+ version->version, version->revision);
+
+ schedule_work(&wcnss->download_nv_work);
+ break;
+ case WCNSS_DOWNLOAD_NV_RESP:
+ if (count != sizeof(*nvresp)) {
+ dev_err(wcnss->dev,
+ "invalid size of download response\n");
+ break;
+ }
+
+ nvresp = data;
+ wcnss->ack_status = nvresp->status;
+ complete(&wcnss->ack);
+ break;
+ default:
+ dev_info(wcnss->dev, "unknown message type %d\n", hdr->type);
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * wcnss_request_version() - send a version request to WCNSS
+ * @wcnss: wcnss ctrl driver context
+ */
+static int wcnss_request_version(struct wcnss_ctrl *wcnss)
+{
+ struct wcnss_msg_hdr msg;
+
+ msg.type = WCNSS_VERSION_REQ;
+ msg.len = sizeof(msg);
+
+ return qcom_smd_send(wcnss->channel, &msg, sizeof(msg));
+}
+
+/**
+ * wcnss_download_nv() - send nv binary to WCNSS
+ * @work: work struct to acquire wcnss context
+ */
+static void wcnss_download_nv(struct work_struct *work)
+{
+ struct wcnss_ctrl *wcnss = container_of(work, struct wcnss_ctrl, download_nv_work);
+ struct wcnss_download_nv_req *req;
+ const struct firmware *fw;
+ const void *data;
+ ssize_t left;
+ int ret;
+
+ req = kzalloc(sizeof(*req) + NV_FRAGMENT_SIZE, GFP_KERNEL);
+ if (!req)
+ return;
+
+ ret = reject_firmware(&fw, NVBIN_FILE, wcnss->dev);
+ if (ret) {
+ dev_err(wcnss->dev, "Failed to load nv file %s: %d\n",
+ NVBIN_FILE, ret);
+ goto free_req;
+ }
+
+ data = fw->data;
+ left = fw->size;
+
+ req->hdr.type = WCNSS_DOWNLOAD_NV_REQ;
+ req->hdr.len = sizeof(*req) + NV_FRAGMENT_SIZE;
+
+ req->last = 0;
+ req->frag_size = NV_FRAGMENT_SIZE;
+
+ req->seq = 0;
+ do {
+ if (left <= NV_FRAGMENT_SIZE) {
+ req->last = 1;
+ req->frag_size = left;
+ req->hdr.len = sizeof(*req) + left;
+ }
+
+ memcpy(req->fragment, data, req->frag_size);
+
+ ret = qcom_smd_send(wcnss->channel, req, req->hdr.len);
+ if (ret) {
+ dev_err(wcnss->dev, "failed to send smd packet\n");
+ goto release_fw;
+ }
+
+ /* Increment for next fragment */
+ req->seq++;
+
+ data += req->hdr.len;
+ left -= NV_FRAGMENT_SIZE;
+ } while (left > 0);
+
+ ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_REQUEST_TIMEOUT);
+ if (!ret)
+ dev_err(wcnss->dev, "timeout waiting for nv upload ack\n");
+ else if (wcnss->ack_status != 1)
+ dev_err(wcnss->dev, "nv upload response failed err: %d\n",
+ wcnss->ack_status);
+
+release_fw:
+ release_firmware(fw);
+free_req:
+ kfree(req);
+}
+
+static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
+{
+ struct wcnss_ctrl *wcnss;
+
+ wcnss = devm_kzalloc(&sdev->dev, sizeof(*wcnss), GFP_KERNEL);
+ if (!wcnss)
+ return -ENOMEM;
+
+ wcnss->dev = &sdev->dev;
+ wcnss->channel = sdev->channel;
+
+ init_completion(&wcnss->ack);
+ INIT_WORK(&wcnss->download_nv_work, wcnss_download_nv);
+
+ dev_set_drvdata(&sdev->dev, wcnss);
+
+ return wcnss_request_version(wcnss);
+}
+
+static const struct qcom_smd_id wcnss_ctrl_smd_match[] = {
+ { .name = "WCNSS_CTRL" },
+ {}
+};
+
+static struct qcom_smd_driver wcnss_ctrl_driver = {
+ .probe = wcnss_ctrl_probe,
+ .callback = wcnss_ctrl_smd_callback,
+ .smd_match_table = wcnss_ctrl_smd_match,
+ .driver = {
+ .name = "qcom_wcnss_ctrl",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_qcom_smd_driver(wcnss_ctrl_driver);
+
+MODULE_DESCRIPTION("Qualcomm WCNSS control driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig
new file mode 100644
index 000000000..d0c3c3e08
--- /dev/null
+++ b/drivers/soc/tegra/Kconfig
@@ -0,0 +1,83 @@
+if ARCH_TEGRA
+
+# 32-bit ARM SoCs
+if ARM
+
+config ARCH_TEGRA_2x_SOC
+ bool "Enable support for Tegra20 family"
+ select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
+ select ARM_ERRATA_720789
+ select ARM_ERRATA_754327 if SMP
+ select ARM_ERRATA_764369 if SMP
+ select PINCTRL_TEGRA20
+ select PL310_ERRATA_727915 if CACHE_L2X0
+ select PL310_ERRATA_769419 if CACHE_L2X0
+ select TEGRA_TIMER
+ help
+ Support for NVIDIA Tegra AP20 and T20 processors, based on the
+ ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
+
+config ARCH_TEGRA_3x_SOC
+ bool "Enable support for Tegra30 family"
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_764369 if SMP
+ select PINCTRL_TEGRA30
+ select PL310_ERRATA_769419 if CACHE_L2X0
+ select TEGRA_TIMER
+ help
+ Support for NVIDIA Tegra T30 processor family, based on the
+ ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
+
+config ARCH_TEGRA_114_SOC
+ bool "Enable support for Tegra114 family"
+ select ARM_ERRATA_798181 if SMP
+ select ARM_L1_CACHE_SHIFT_6
+ select HAVE_ARM_ARCH_TIMER
+ select PINCTRL_TEGRA114
+ select TEGRA_TIMER
+ help
+ Support for NVIDIA Tegra T114 processor family, based on the
+ ARM CortexA15MP CPU
+
+config ARCH_TEGRA_124_SOC
+ bool "Enable support for Tegra124 family"
+ select ARM_L1_CACHE_SHIFT_6
+ select HAVE_ARM_ARCH_TIMER
+ select PINCTRL_TEGRA124
+ select TEGRA_TIMER
+ help
+ Support for NVIDIA Tegra T124 processor family, based on the
+ ARM CortexA15MP CPU
+
+endif
+
+# 64-bit ARM SoCs
+if ARM64
+
+config ARCH_TEGRA_132_SOC
+ bool "NVIDIA Tegra132 SoC"
+ select PINCTRL_TEGRA124
+ help
+ Enable support for NVIDIA Tegra132 SoC, based on the Denver
+ ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC,
+ but contains an NVIDIA Denver CPU complex in place of
+ Tegra124's "4+1" Cortex-A15 CPU complex.
+
+config ARCH_TEGRA_210_SOC
+ bool "NVIDIA Tegra210 SoC"
+ select PINCTRL_TEGRA210
+ help
+ Enable support for the NVIDIA Tegra210 SoC. Also known as Tegra X1,
+ the Tegra210 has four Cortex-A57 cores paired with four Cortex-A53
+ cores in a switched configuration. It features a GPU of the Maxwell
+ architecture with support for DX11, SM4, OpenGL 4.5, OpenGL ES 3.1
+ and providing 256 CUDA cores. It supports hardware-accelerated en-
+ and decoding of various video standards including H.265, H.264 and
+ VP8 at 4K resolution and up to 60 fps.
+
+ Besides the multimedia features it also comes with a variety of I/O
+ controllers, such as GPIO, I2C, SPI, SDHCI, PCIe, SATA and XHCI, to
+ name only a few.
+
+endif
+endif
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index 7266b2165..3557c5e32 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -28,4 +28,14 @@ config KEYSTONE_NAVIGATOR_DMA
If unsure, say N.
+config WKUP_M3_IPC
+ tristate "TI AMx3 Wkup-M3 IPC Driver"
+ depends on WKUP_M3_RPROC
+ depends on OMAP2PLUS_MBOX
+ help
+ TI AM33XX and AM43XX have a Cortex M3, the Wakeup M3, to handle
+ low power transitions. This IPC driver provides the necessary API
+ to communicate and use the Wakeup M3 for PM features like suspend
+ resume and boots it using wkup_m3_rproc driver.
+
endif # SOC_TI
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index 135bdad7a..48ff3a796 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS) += knav_qmss.o
knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA) += knav_dma.o
+obj-$(CONFIG_WKUP_M3_IPC) += wkup_m3_ipc.o
diff --git a/drivers/soc/ti/knav_dma.c b/drivers/soc/ti/knav_dma.c
index bc1b80ec6..1a7b5caa1 100644
--- a/drivers/soc/ti/knav_dma.c
+++ b/drivers/soc/ti/knav_dma.c
@@ -389,7 +389,7 @@ static int of_channel_match_helper(struct device_node *np, const char *name,
*dma_instance = dma_node->name;
index = of_property_match_string(np, "ti,navigator-dma-names", name);
if (index < 0) {
- dev_err(kdev->dev, "No 'ti,navigator-dma-names' propery\n");
+ dev_err(kdev->dev, "No 'ti,navigator-dma-names' property\n");
return -ENODEV;
}
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
new file mode 100644
index 000000000..8823cc81a
--- /dev/null
+++ b/drivers/soc/ti/wkup_m3_ipc.c
@@ -0,0 +1,508 @@
+/*
+ * AMx3 Wkup M3 IPC driver
+ *
+ * Copyright (C) 2015 Texas Instruments, Inc.
+ *
+ * Dave Gerlach <d-gerlach@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/omap-mailbox.h>
+#include <linux/platform_device.h>
+#include <linux/remoteproc.h>
+#include <linux/suspend.h>
+#include <linux/wkup_m3_ipc.h>
+
+#define AM33XX_CTRL_IPC_REG_COUNT 0x8
+#define AM33XX_CTRL_IPC_REG_OFFSET(m) (0x4 + 4 * (m))
+
+/* AM33XX M3_TXEV_EOI register */
+#define AM33XX_CONTROL_M3_TXEV_EOI 0x00
+
+#define AM33XX_M3_TXEV_ACK (0x1 << 0)
+#define AM33XX_M3_TXEV_ENABLE (0x0 << 0)
+
+#define IPC_CMD_DS0 0x4
+#define IPC_CMD_STANDBY 0xc
+#define IPC_CMD_IDLE 0x10
+#define IPC_CMD_RESET 0xe
+#define DS_IPC_DEFAULT 0xffffffff
+#define M3_VERSION_UNKNOWN 0x0000ffff
+#define M3_BASELINE_VERSION 0x191
+#define M3_STATUS_RESP_MASK (0xffff << 16)
+#define M3_FW_VERSION_MASK 0xffff
+
+#define M3_STATE_UNKNOWN 0
+#define M3_STATE_RESET 1
+#define M3_STATE_INITED 2
+#define M3_STATE_MSG_FOR_LP 3
+#define M3_STATE_MSG_FOR_RESET 4
+
+static struct wkup_m3_ipc *m3_ipc_state;
+
+static void am33xx_txev_eoi(struct wkup_m3_ipc *m3_ipc)
+{
+ writel(AM33XX_M3_TXEV_ACK,
+ m3_ipc->ipc_mem_base + AM33XX_CONTROL_M3_TXEV_EOI);
+}
+
+static void am33xx_txev_enable(struct wkup_m3_ipc *m3_ipc)
+{
+ writel(AM33XX_M3_TXEV_ENABLE,
+ m3_ipc->ipc_mem_base + AM33XX_CONTROL_M3_TXEV_EOI);
+}
+
+static void wkup_m3_ctrl_ipc_write(struct wkup_m3_ipc *m3_ipc,
+ u32 val, int ipc_reg_num)
+{
+ if (WARN(ipc_reg_num < 0 || ipc_reg_num > AM33XX_CTRL_IPC_REG_COUNT,
+ "ipc register operation out of range"))
+ return;
+
+ writel(val, m3_ipc->ipc_mem_base +
+ AM33XX_CTRL_IPC_REG_OFFSET(ipc_reg_num));
+}
+
+static unsigned int wkup_m3_ctrl_ipc_read(struct wkup_m3_ipc *m3_ipc,
+ int ipc_reg_num)
+{
+ if (WARN(ipc_reg_num < 0 || ipc_reg_num > AM33XX_CTRL_IPC_REG_COUNT,
+ "ipc register operation out of range"))
+ return 0;
+
+ return readl(m3_ipc->ipc_mem_base +
+ AM33XX_CTRL_IPC_REG_OFFSET(ipc_reg_num));
+}
+
+static int wkup_m3_fw_version_read(struct wkup_m3_ipc *m3_ipc)
+{
+ int val;
+
+ val = wkup_m3_ctrl_ipc_read(m3_ipc, 2);
+
+ return val & M3_FW_VERSION_MASK;
+}
+
+static irqreturn_t wkup_m3_txev_handler(int irq, void *ipc_data)
+{
+ struct wkup_m3_ipc *m3_ipc = ipc_data;
+ struct device *dev = m3_ipc->dev;
+ int ver = 0;
+
+ am33xx_txev_eoi(m3_ipc);
+
+ switch (m3_ipc->state) {
+ case M3_STATE_RESET:
+ ver = wkup_m3_fw_version_read(m3_ipc);
+
+ if (ver == M3_VERSION_UNKNOWN ||
+ ver < M3_BASELINE_VERSION) {
+ dev_warn(dev, "CM3 Firmware Version %x not supported\n",
+ ver);
+ } else {
+ dev_info(dev, "CM3 Firmware Version = 0x%x\n", ver);
+ }
+
+ m3_ipc->state = M3_STATE_INITED;
+ complete(&m3_ipc->sync_complete);
+ break;
+ case M3_STATE_MSG_FOR_RESET:
+ m3_ipc->state = M3_STATE_INITED;
+ complete(&m3_ipc->sync_complete);
+ break;
+ case M3_STATE_MSG_FOR_LP:
+ complete(&m3_ipc->sync_complete);
+ break;
+ case M3_STATE_UNKNOWN:
+ dev_warn(dev, "Unknown CM3 State\n");
+ }
+
+ am33xx_txev_enable(m3_ipc);
+
+ return IRQ_HANDLED;
+}
+
+static int wkup_m3_ping(struct wkup_m3_ipc *m3_ipc)
+{
+ struct device *dev = m3_ipc->dev;
+ mbox_msg_t dummy_msg = 0;
+ int ret;
+
+ if (!m3_ipc->mbox) {
+ dev_err(dev,
+ "No IPC channel to communicate with wkup_m3!\n");
+ return -EIO;
+ }
+
+ /*
+ * Write a dummy message to the mailbox in order to trigger the RX
+ * interrupt to alert the M3 that data is available in the IPC
+ * registers. We must enable the IRQ here and disable it after in
+ * the RX callback to avoid multiple interrupts being received
+ * by the CM3.
+ */
+ ret = mbox_send_message(m3_ipc->mbox, &dummy_msg);
+ if (ret < 0) {
+ dev_err(dev, "%s: mbox_send_message() failed: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = wait_for_completion_timeout(&m3_ipc->sync_complete,
+ msecs_to_jiffies(500));
+ if (!ret) {
+ dev_err(dev, "MPU<->CM3 sync failure\n");
+ m3_ipc->state = M3_STATE_UNKNOWN;
+ return -EIO;
+ }
+
+ mbox_client_txdone(m3_ipc->mbox, 0);
+ return 0;
+}
+
+static int wkup_m3_ping_noirq(struct wkup_m3_ipc *m3_ipc)
+{
+ struct device *dev = m3_ipc->dev;
+ mbox_msg_t dummy_msg = 0;
+ int ret;
+
+ if (!m3_ipc->mbox) {
+ dev_err(dev,
+ "No IPC channel to communicate with wkup_m3!\n");
+ return -EIO;
+ }
+
+ ret = mbox_send_message(m3_ipc->mbox, &dummy_msg);
+ if (ret < 0) {
+ dev_err(dev, "%s: mbox_send_message() failed: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ mbox_client_txdone(m3_ipc->mbox, 0);
+ return 0;
+}
+
+static int wkup_m3_is_available(struct wkup_m3_ipc *m3_ipc)
+{
+ return ((m3_ipc->state != M3_STATE_RESET) &&
+ (m3_ipc->state != M3_STATE_UNKNOWN));
+}
+
+/* Public functions */
+/**
+ * wkup_m3_set_mem_type - Pass wkup_m3 which type of memory is in use
+ * @mem_type: memory type value read directly from emif
+ *
+ * wkup_m3 must know what memory type is in use to properly suspend
+ * and resume.
+ */
+static void wkup_m3_set_mem_type(struct wkup_m3_ipc *m3_ipc, int mem_type)
+{
+ m3_ipc->mem_type = mem_type;
+}
+
+/**
+ * wkup_m3_set_resume_address - Pass wkup_m3 resume address
+ * @addr: Physical address from which resume code should execute
+ */
+static void wkup_m3_set_resume_address(struct wkup_m3_ipc *m3_ipc, void *addr)
+{
+ m3_ipc->resume_addr = (unsigned long)addr;
+}
+
+/**
+ * wkup_m3_request_pm_status - Retrieve wkup_m3 status code after suspend
+ *
+ * Returns code representing the status of a low power mode transition.
+ * 0 - Successful transition
+ * 1 - Failure to transition to low power state
+ */
+static int wkup_m3_request_pm_status(struct wkup_m3_ipc *m3_ipc)
+{
+ unsigned int i;
+ int val;
+
+ val = wkup_m3_ctrl_ipc_read(m3_ipc, 1);
+
+ i = M3_STATUS_RESP_MASK & val;
+ i >>= __ffs(M3_STATUS_RESP_MASK);
+
+ return i;
+}
+
+/**
+ * wkup_m3_prepare_low_power - Request preparation for transition to
+ * low power state
+ * @state: A kernel suspend state to enter, either MEM or STANDBY
+ *
+ * Returns 0 if preparation was successful, otherwise returns error code
+ */
+static int wkup_m3_prepare_low_power(struct wkup_m3_ipc *m3_ipc, int state)
+{
+ struct device *dev = m3_ipc->dev;
+ int m3_power_state;
+ int ret = 0;
+
+ if (!wkup_m3_is_available(m3_ipc))
+ return -ENODEV;
+
+ switch (state) {
+ case WKUP_M3_DEEPSLEEP:
+ m3_power_state = IPC_CMD_DS0;
+ break;
+ case WKUP_M3_STANDBY:
+ m3_power_state = IPC_CMD_STANDBY;
+ break;
+ case WKUP_M3_IDLE:
+ m3_power_state = IPC_CMD_IDLE;
+ break;
+ default:
+ return 1;
+ }
+
+ /* Program each required IPC register then write defaults to others */
+ wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->resume_addr, 0);
+ wkup_m3_ctrl_ipc_write(m3_ipc, m3_power_state, 1);
+ wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->mem_type, 4);
+
+ wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 2);
+ wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 3);
+ wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 5);
+ wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 6);
+ wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 7);
+
+ m3_ipc->state = M3_STATE_MSG_FOR_LP;
+
+ if (state == WKUP_M3_IDLE)
+ ret = wkup_m3_ping_noirq(m3_ipc);
+ else
+ ret = wkup_m3_ping(m3_ipc);
+
+ if (ret) {
+ dev_err(dev, "Unable to ping CM3\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * wkup_m3_finish_low_power - Return m3 to reset state
+ *
+ * Returns 0 if reset was successful, otherwise returns error code
+ */
+static int wkup_m3_finish_low_power(struct wkup_m3_ipc *m3_ipc)
+{
+ struct device *dev = m3_ipc->dev;
+ int ret = 0;
+
+ if (!wkup_m3_is_available(m3_ipc))
+ return -ENODEV;
+
+ wkup_m3_ctrl_ipc_write(m3_ipc, IPC_CMD_RESET, 1);
+ wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 2);
+
+ m3_ipc->state = M3_STATE_MSG_FOR_RESET;
+
+ ret = wkup_m3_ping(m3_ipc);
+ if (ret) {
+ dev_err(dev, "Unable to ping CM3\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct wkup_m3_ipc_ops ipc_ops = {
+ .set_mem_type = wkup_m3_set_mem_type,
+ .set_resume_address = wkup_m3_set_resume_address,
+ .prepare_low_power = wkup_m3_prepare_low_power,
+ .finish_low_power = wkup_m3_finish_low_power,
+ .request_pm_status = wkup_m3_request_pm_status,
+};
+
+/**
+ * wkup_m3_ipc_get - Return handle to wkup_m3_ipc
+ *
+ * Returns NULL if the wkup_m3 is not yet available, otherwise returns
+ * pointer to wkup_m3_ipc struct.
+ */
+struct wkup_m3_ipc *wkup_m3_ipc_get(void)
+{
+ if (m3_ipc_state)
+ get_device(m3_ipc_state->dev);
+ else
+ return NULL;
+
+ return m3_ipc_state;
+}
+EXPORT_SYMBOL_GPL(wkup_m3_ipc_get);
+
+/**
+ * wkup_m3_ipc_put - Free handle to wkup_m3_ipc returned from wkup_m3_ipc_get
+ * @m3_ipc: A pointer to wkup_m3_ipc struct returned by wkup_m3_ipc_get
+ */
+void wkup_m3_ipc_put(struct wkup_m3_ipc *m3_ipc)
+{
+ if (m3_ipc_state)
+ put_device(m3_ipc_state->dev);
+}
+EXPORT_SYMBOL_GPL(wkup_m3_ipc_put);
+
+static void wkup_m3_rproc_boot_thread(struct wkup_m3_ipc *m3_ipc)
+{
+ struct device *dev = m3_ipc->dev;
+ int ret;
+
+ wait_for_completion(&m3_ipc->rproc->firmware_loading_complete);
+
+ init_completion(&m3_ipc->sync_complete);
+
+ ret = rproc_boot(m3_ipc->rproc);
+ if (ret)
+ dev_err(dev, "rproc_boot failed\n");
+
+ do_exit(0);
+}
+
+static int wkup_m3_ipc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ int irq, ret;
+ phandle rproc_phandle;
+ struct rproc *m3_rproc;
+ struct resource *res;
+ struct task_struct *task;
+ struct wkup_m3_ipc *m3_ipc;
+
+ m3_ipc = devm_kzalloc(dev, sizeof(*m3_ipc), GFP_KERNEL);
+ if (!m3_ipc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ m3_ipc->ipc_mem_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(m3_ipc->ipc_mem_base)) {
+ dev_err(dev, "could not ioremap ipc_mem\n");
+ return PTR_ERR(m3_ipc->ipc_mem_base);
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "no irq resource\n");
+ return -ENXIO;
+ }
+
+ ret = devm_request_irq(dev, irq, wkup_m3_txev_handler,
+ 0, "wkup_m3_txev", m3_ipc);
+ if (ret) {
+ dev_err(dev, "request_irq failed\n");
+ return ret;
+ }
+
+ m3_ipc->mbox_client.dev = dev;
+ m3_ipc->mbox_client.tx_done = NULL;
+ m3_ipc->mbox_client.tx_prepare = NULL;
+ m3_ipc->mbox_client.rx_callback = NULL;
+ m3_ipc->mbox_client.tx_block = false;
+ m3_ipc->mbox_client.knows_txdone = false;
+
+ m3_ipc->mbox = mbox_request_channel(&m3_ipc->mbox_client, 0);
+
+ if (IS_ERR(m3_ipc->mbox)) {
+ dev_err(dev, "IPC Request for A8->M3 Channel failed! %ld\n",
+ PTR_ERR(m3_ipc->mbox));
+ return PTR_ERR(m3_ipc->mbox);
+ }
+
+ if (of_property_read_u32(dev->of_node, "ti,rproc", &rproc_phandle)) {
+ dev_err(&pdev->dev, "could not get rproc phandle\n");
+ ret = -ENODEV;
+ goto err_free_mbox;
+ }
+
+ m3_rproc = rproc_get_by_phandle(rproc_phandle);
+ if (!m3_rproc) {
+ dev_err(&pdev->dev, "could not get rproc handle\n");
+ ret = -EPROBE_DEFER;
+ goto err_free_mbox;
+ }
+
+ m3_ipc->rproc = m3_rproc;
+ m3_ipc->dev = dev;
+ m3_ipc->state = M3_STATE_RESET;
+
+ m3_ipc->ops = &ipc_ops;
+
+ /*
+ * Wait for firmware loading completion in a thread so we
+ * can boot the wkup_m3 as soon as it's ready without holding
+ * up kernel boot
+ */
+ task = kthread_run((void *)wkup_m3_rproc_boot_thread, m3_ipc,
+ "wkup_m3_rproc_loader");
+
+ if (IS_ERR(task)) {
+ dev_err(dev, "can't create rproc_boot thread\n");
+ goto err_put_rproc;
+ }
+
+ m3_ipc_state = m3_ipc;
+
+ return 0;
+
+err_put_rproc:
+ rproc_put(m3_rproc);
+err_free_mbox:
+ mbox_free_channel(m3_ipc->mbox);
+ return ret;
+}
+
+static int wkup_m3_ipc_remove(struct platform_device *pdev)
+{
+ mbox_free_channel(m3_ipc_state->mbox);
+
+ rproc_shutdown(m3_ipc_state->rproc);
+ rproc_put(m3_ipc_state->rproc);
+
+ m3_ipc_state = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id wkup_m3_ipc_of_match[] = {
+ { .compatible = "ti,am3352-wkup-m3-ipc", },
+ { .compatible = "ti,am4372-wkup-m3-ipc", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, wkup_m3_ipc_of_match);
+
+static struct platform_driver wkup_m3_ipc_driver = {
+ .probe = wkup_m3_ipc_probe,
+ .remove = wkup_m3_ipc_remove,
+ .driver = {
+ .name = "wkup_m3_ipc",
+ .of_match_table = wkup_m3_ipc_of_match,
+ },
+};
+
+module_platform_driver(wkup_m3_ipc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("wkup m3 remote processor ipc driver");
+MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>");
diff --git a/drivers/soc/versatile/soc-realview.c b/drivers/soc/versatile/soc-realview.c
index e642c4540..c337764de 100644
--- a/drivers/soc/versatile/soc-realview.c
+++ b/drivers/soc/versatile/soc-realview.c
@@ -36,6 +36,8 @@ static const char *realview_board_str(u32 id)
switch ((id >> 16) & 0xfff) {
case 0x0147:
return "HBI-0147";
+ case 0x0159:
+ return "HBI-0159";
default:
return "Unknown";
}
@@ -44,6 +46,8 @@ static const char *realview_board_str(u32 id)
static const char *realview_arch_str(u32 id)
{
switch ((id >> 8) & 0xf) {
+ case 0x04:
+ return "AHB";
case 0x05:
return "Multi-layer AXI";
default: