summaryrefslogtreecommitdiff
path: root/drivers/ssb/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ssb/main.c')
-rw-r--r--drivers/ssb/main.c1488
1 files changed, 1488 insertions, 0 deletions
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
new file mode 100644
index 000000000..a48a7439a
--- /dev/null
+++ b/drivers/ssb/main.c
@@ -0,0 +1,1488 @@
+/*
+ * Sonics Silicon Backplane
+ * Subsystem core
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "ssb_private.h"
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_regs.h>
+#include <linux/ssb/ssb_driver_gige.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/slab.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+
+MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
+MODULE_LICENSE("GPL");
+
+
+/* Temporary list of yet-to-be-attached buses */
+static LIST_HEAD(attach_queue);
+/* List if running buses */
+static LIST_HEAD(buses);
+/* Software ID counter */
+static unsigned int next_busnumber;
+/* buses_mutes locks the two buslists and the next_busnumber.
+ * Don't lock this directly, but use ssb_buses_[un]lock() below. */
+static DEFINE_MUTEX(buses_mutex);
+
+/* There are differences in the codeflow, if the bus is
+ * initialized from early boot, as various needed services
+ * are not available early. This is a mechanism to delay
+ * these initializations to after early boot has finished.
+ * It's also used to avoid mutex locking, as that's not
+ * available and needed early. */
+static bool ssb_is_early_boot = 1;
+
+static void ssb_buses_lock(void);
+static void ssb_buses_unlock(void);
+
+
+#ifdef CONFIG_SSB_PCIHOST
+struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
+{
+ struct ssb_bus *bus;
+
+ ssb_buses_lock();
+ list_for_each_entry(bus, &buses, list) {
+ if (bus->bustype == SSB_BUSTYPE_PCI &&
+ bus->host_pci == pdev)
+ goto found;
+ }
+ bus = NULL;
+found:
+ ssb_buses_unlock();
+
+ return bus;
+}
+#endif /* CONFIG_SSB_PCIHOST */
+
+#ifdef CONFIG_SSB_PCMCIAHOST
+struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev)
+{
+ struct ssb_bus *bus;
+
+ ssb_buses_lock();
+ list_for_each_entry(bus, &buses, list) {
+ if (bus->bustype == SSB_BUSTYPE_PCMCIA &&
+ bus->host_pcmcia == pdev)
+ goto found;
+ }
+ bus = NULL;
+found:
+ ssb_buses_unlock();
+
+ return bus;
+}
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
+int ssb_for_each_bus_call(unsigned long data,
+ int (*func)(struct ssb_bus *bus, unsigned long data))
+{
+ struct ssb_bus *bus;
+ int res;
+
+ ssb_buses_lock();
+ list_for_each_entry(bus, &buses, list) {
+ res = func(bus, data);
+ if (res >= 0) {
+ ssb_buses_unlock();
+ return res;
+ }
+ }
+ ssb_buses_unlock();
+
+ return -ENODEV;
+}
+
+static struct ssb_device *ssb_device_get(struct ssb_device *dev)
+{
+ if (dev)
+ get_device(dev->dev);
+ return dev;
+}
+
+static void ssb_device_put(struct ssb_device *dev)
+{
+ if (dev)
+ put_device(dev->dev);
+}
+
+static int ssb_device_resume(struct device *dev)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv;
+ int err = 0;
+
+ if (dev->driver) {
+ ssb_drv = drv_to_ssb_drv(dev->driver);
+ if (ssb_drv && ssb_drv->resume)
+ err = ssb_drv->resume(ssb_dev);
+ if (err)
+ goto out;
+ }
+out:
+ return err;
+}
+
+static int ssb_device_suspend(struct device *dev, pm_message_t state)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv;
+ int err = 0;
+
+ if (dev->driver) {
+ ssb_drv = drv_to_ssb_drv(dev->driver);
+ if (ssb_drv && ssb_drv->suspend)
+ err = ssb_drv->suspend(ssb_dev, state);
+ if (err)
+ goto out;
+ }
+out:
+ return err;
+}
+
+int ssb_bus_resume(struct ssb_bus *bus)
+{
+ int err;
+
+ /* Reset HW state information in memory, so that HW is
+ * completely reinitialized. */
+ bus->mapped_device = NULL;
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+ bus->pcicore.setup_done = 0;
+#endif
+
+ err = ssb_bus_powerup(bus, 0);
+ if (err)
+ return err;
+ err = ssb_pcmcia_hardware_setup(bus);
+ if (err) {
+ ssb_bus_may_powerdown(bus);
+ return err;
+ }
+ ssb_chipco_resume(&bus->chipco);
+ ssb_bus_may_powerdown(bus);
+
+ return 0;
+}
+EXPORT_SYMBOL(ssb_bus_resume);
+
+int ssb_bus_suspend(struct ssb_bus *bus)
+{
+ ssb_chipco_suspend(&bus->chipco);
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL(ssb_bus_suspend);
+
+#ifdef CONFIG_SSB_SPROM
+/** ssb_devices_freeze - Freeze all devices on the bus.
+ *
+ * After freezing no device driver will be handling a device
+ * on this bus anymore. ssb_devices_thaw() must be called after
+ * a successful freeze to reactivate the devices.
+ *
+ * @bus: The bus.
+ * @ctx: Context structure. Pass this to ssb_devices_thaw().
+ */
+int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
+{
+ struct ssb_device *sdev;
+ struct ssb_driver *sdrv;
+ unsigned int i;
+
+ memset(ctx, 0, sizeof(*ctx));
+ ctx->bus = bus;
+ SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
+
+ for (i = 0; i < bus->nr_devices; i++) {
+ sdev = ssb_device_get(&bus->devices[i]);
+
+ if (!sdev->dev || !sdev->dev->driver ||
+ !device_is_registered(sdev->dev)) {
+ ssb_device_put(sdev);
+ continue;
+ }
+ sdrv = drv_to_ssb_drv(sdev->dev->driver);
+ if (SSB_WARN_ON(!sdrv->remove))
+ continue;
+ sdrv->remove(sdev);
+ ctx->device_frozen[i] = 1;
+ }
+
+ return 0;
+}
+
+/** ssb_devices_thaw - Unfreeze all devices on the bus.
+ *
+ * This will re-attach the device drivers and re-init the devices.
+ *
+ * @ctx: The context structure from ssb_devices_freeze()
+ */
+int ssb_devices_thaw(struct ssb_freeze_context *ctx)
+{
+ struct ssb_bus *bus = ctx->bus;
+ struct ssb_device *sdev;
+ struct ssb_driver *sdrv;
+ unsigned int i;
+ int err, result = 0;
+
+ for (i = 0; i < bus->nr_devices; i++) {
+ if (!ctx->device_frozen[i])
+ continue;
+ sdev = &bus->devices[i];
+
+ if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
+ continue;
+ sdrv = drv_to_ssb_drv(sdev->dev->driver);
+ if (SSB_WARN_ON(!sdrv || !sdrv->probe))
+ continue;
+
+ err = sdrv->probe(sdev, &sdev->id);
+ if (err) {
+ ssb_err("Failed to thaw device %s\n",
+ dev_name(sdev->dev));
+ result = err;
+ }
+ ssb_device_put(sdev);
+ }
+
+ return result;
+}
+#endif /* CONFIG_SSB_SPROM */
+
+static void ssb_device_shutdown(struct device *dev)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv;
+
+ if (!dev->driver)
+ return;
+ ssb_drv = drv_to_ssb_drv(dev->driver);
+ if (ssb_drv && ssb_drv->shutdown)
+ ssb_drv->shutdown(ssb_dev);
+}
+
+static int ssb_device_remove(struct device *dev)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
+
+ if (ssb_drv && ssb_drv->remove)
+ ssb_drv->remove(ssb_dev);
+ ssb_device_put(ssb_dev);
+
+ return 0;
+}
+
+static int ssb_device_probe(struct device *dev)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
+ int err = 0;
+
+ ssb_device_get(ssb_dev);
+ if (ssb_drv && ssb_drv->probe)
+ err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
+ if (err)
+ ssb_device_put(ssb_dev);
+
+ return err;
+}
+
+static int ssb_match_devid(const struct ssb_device_id *tabid,
+ const struct ssb_device_id *devid)
+{
+ if ((tabid->vendor != devid->vendor) &&
+ tabid->vendor != SSB_ANY_VENDOR)
+ return 0;
+ if ((tabid->coreid != devid->coreid) &&
+ tabid->coreid != SSB_ANY_ID)
+ return 0;
+ if ((tabid->revision != devid->revision) &&
+ tabid->revision != SSB_ANY_REV)
+ return 0;
+ return 1;
+}
+
+static int ssb_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+ struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
+ const struct ssb_device_id *id;
+
+ for (id = ssb_drv->id_table;
+ id->vendor || id->coreid || id->revision;
+ id++) {
+ if (ssb_match_devid(id, &ssb_dev->id))
+ return 1; /* found */
+ }
+
+ return 0;
+}
+
+static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+
+ if (!dev)
+ return -ENODEV;
+
+ return add_uevent_var(env,
+ "MODALIAS=ssb:v%04Xid%04Xrev%02X",
+ ssb_dev->id.vendor, ssb_dev->id.coreid,
+ ssb_dev->id.revision);
+}
+
+#define ssb_config_attr(attrib, field, format_string) \
+static ssize_t \
+attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
+} \
+static DEVICE_ATTR_RO(attrib);
+
+ssb_config_attr(core_num, core_index, "%u\n")
+ssb_config_attr(coreid, id.coreid, "0x%04x\n")
+ssb_config_attr(vendor, id.vendor, "0x%04x\n")
+ssb_config_attr(revision, id.revision, "%u\n")
+ssb_config_attr(irq, irq, "%u\n")
+static ssize_t
+name_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s\n",
+ ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
+}
+static DEVICE_ATTR_RO(name);
+
+static struct attribute *ssb_device_attrs[] = {
+ &dev_attr_name.attr,
+ &dev_attr_core_num.attr,
+ &dev_attr_coreid.attr,
+ &dev_attr_vendor.attr,
+ &dev_attr_revision.attr,
+ &dev_attr_irq.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(ssb_device);
+
+static struct bus_type ssb_bustype = {
+ .name = "ssb",
+ .match = ssb_bus_match,
+ .probe = ssb_device_probe,
+ .remove = ssb_device_remove,
+ .shutdown = ssb_device_shutdown,
+ .suspend = ssb_device_suspend,
+ .resume = ssb_device_resume,
+ .uevent = ssb_device_uevent,
+ .dev_groups = ssb_device_groups,
+};
+
+static void ssb_buses_lock(void)
+{
+ /* See the comment at the ssb_is_early_boot definition */
+ if (!ssb_is_early_boot)
+ mutex_lock(&buses_mutex);
+}
+
+static void ssb_buses_unlock(void)
+{
+ /* See the comment at the ssb_is_early_boot definition */
+ if (!ssb_is_early_boot)
+ mutex_unlock(&buses_mutex);
+}
+
+static void ssb_devices_unregister(struct ssb_bus *bus)
+{
+ struct ssb_device *sdev;
+ int i;
+
+ for (i = bus->nr_devices - 1; i >= 0; i--) {
+ sdev = &(bus->devices[i]);
+ if (sdev->dev)
+ device_unregister(sdev->dev);
+ }
+
+#ifdef CONFIG_SSB_EMBEDDED
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ platform_device_unregister(bus->watchdog);
+#endif
+}
+
+void ssb_bus_unregister(struct ssb_bus *bus)
+{
+ int err;
+
+ err = ssb_gpio_unregister(bus);
+ if (err == -EBUSY)
+ ssb_dbg("Some GPIOs are still in use\n");
+ else if (err)
+ ssb_dbg("Can not unregister GPIO driver: %i\n", err);
+
+ ssb_buses_lock();
+ ssb_devices_unregister(bus);
+ list_del(&bus->list);
+ ssb_buses_unlock();
+
+ ssb_pcmcia_exit(bus);
+ ssb_pci_exit(bus);
+ ssb_iounmap(bus);
+}
+EXPORT_SYMBOL(ssb_bus_unregister);
+
+static void ssb_release_dev(struct device *dev)
+{
+ struct __ssb_dev_wrapper *devwrap;
+
+ devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
+ kfree(devwrap);
+}
+
+static int ssb_devices_register(struct ssb_bus *bus)
+{
+ struct ssb_device *sdev;
+ struct device *dev;
+ struct __ssb_dev_wrapper *devwrap;
+ int i, err = 0;
+ int dev_idx = 0;
+
+ for (i = 0; i < bus->nr_devices; i++) {
+ sdev = &(bus->devices[i]);
+
+ /* We don't register SSB-system devices to the kernel,
+ * as the drivers for them are built into SSB. */
+ switch (sdev->id.coreid) {
+ case SSB_DEV_CHIPCOMMON:
+ case SSB_DEV_PCI:
+ case SSB_DEV_PCIE:
+ case SSB_DEV_PCMCIA:
+ case SSB_DEV_MIPS:
+ case SSB_DEV_MIPS_3302:
+ case SSB_DEV_EXTIF:
+ continue;
+ }
+
+ devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
+ if (!devwrap) {
+ ssb_err("Could not allocate device\n");
+ err = -ENOMEM;
+ goto error;
+ }
+ dev = &devwrap->dev;
+ devwrap->sdev = sdev;
+
+ dev->release = ssb_release_dev;
+ dev->bus = &ssb_bustype;
+ dev_set_name(dev, "ssb%u:%d", bus->busnumber, dev_idx);
+
+ switch (bus->bustype) {
+ case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
+ sdev->irq = bus->host_pci->irq;
+ dev->parent = &bus->host_pci->dev;
+ sdev->dma_dev = dev->parent;
+#endif
+ break;
+ case SSB_BUSTYPE_PCMCIA:
+#ifdef CONFIG_SSB_PCMCIAHOST
+ sdev->irq = bus->host_pcmcia->irq;
+ dev->parent = &bus->host_pcmcia->dev;
+#endif
+ break;
+ case SSB_BUSTYPE_SDIO:
+#ifdef CONFIG_SSB_SDIOHOST
+ dev->parent = &bus->host_sdio->dev;
+#endif
+ break;
+ case SSB_BUSTYPE_SSB:
+ dev->dma_mask = &dev->coherent_dma_mask;
+ sdev->dma_dev = dev;
+ break;
+ }
+
+ sdev->dev = dev;
+ err = device_register(dev);
+ if (err) {
+ ssb_err("Could not register %s\n", dev_name(dev));
+ /* Set dev to NULL to not unregister
+ * dev on error unwinding. */
+ sdev->dev = NULL;
+ kfree(devwrap);
+ goto error;
+ }
+ dev_idx++;
+ }
+
+#ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.pflash.present) {
+ err = platform_device_register(&ssb_pflash_dev);
+ if (err)
+ pr_err("Error registering parallel flash\n");
+ }
+#endif
+
+#ifdef CONFIG_SSB_SFLASH
+ if (bus->mipscore.sflash.present) {
+ err = platform_device_register(&ssb_sflash_dev);
+ if (err)
+ pr_err("Error registering serial flash\n");
+ }
+#endif
+
+ return 0;
+error:
+ /* Unwind the already registered devices. */
+ ssb_devices_unregister(bus);
+ return err;
+}
+
+/* Needs ssb_buses_lock() */
+static int ssb_attach_queued_buses(void)
+{
+ struct ssb_bus *bus, *n;
+ int err = 0;
+ int drop_them_all = 0;
+
+ list_for_each_entry_safe(bus, n, &attach_queue, list) {
+ if (drop_them_all) {
+ list_del(&bus->list);
+ continue;
+ }
+ /* Can't init the PCIcore in ssb_bus_register(), as that
+ * is too early in boot for embedded systems
+ * (no udelay() available). So do it here in attach stage.
+ */
+ err = ssb_bus_powerup(bus, 0);
+ if (err)
+ goto error;
+ ssb_pcicore_init(&bus->pcicore);
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ ssb_watchdog_register(bus);
+
+ err = ssb_gpio_init(bus);
+ if (err == -ENOTSUPP)
+ ssb_dbg("GPIO driver not activated\n");
+ else if (err)
+ ssb_dbg("Error registering GPIO driver: %i\n", err);
+
+ ssb_bus_may_powerdown(bus);
+
+ err = ssb_devices_register(bus);
+error:
+ if (err) {
+ drop_them_all = 1;
+ list_del(&bus->list);
+ continue;
+ }
+ list_move_tail(&bus->list, &buses);
+ }
+
+ return err;
+}
+
+static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ return readb(bus->mmio + offset);
+}
+
+static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ return readw(bus->mmio + offset);
+}
+
+static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ return readl(bus->mmio + offset);
+}
+
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_ssb_block_read(struct ssb_device *dev, void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ struct ssb_bus *bus = dev->bus;
+ void __iomem *addr;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ addr = bus->mmio + offset;
+
+ switch (reg_width) {
+ case sizeof(u8): {
+ u8 *buf = buffer;
+
+ while (count) {
+ *buf = __raw_readb(addr);
+ buf++;
+ count--;
+ }
+ break;
+ }
+ case sizeof(u16): {
+ __le16 *buf = buffer;
+
+ SSB_WARN_ON(count & 1);
+ while (count) {
+ *buf = (__force __le16)__raw_readw(addr);
+ buf++;
+ count -= 2;
+ }
+ break;
+ }
+ case sizeof(u32): {
+ __le32 *buf = buffer;
+
+ SSB_WARN_ON(count & 3);
+ while (count) {
+ *buf = (__force __le32)__raw_readl(addr);
+ buf++;
+ count -= 4;
+ }
+ break;
+ }
+ default:
+ SSB_WARN_ON(1);
+ }
+}
+#endif /* CONFIG_SSB_BLOCKIO */
+
+static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ writeb(value, bus->mmio + offset);
+}
+
+static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ writew(value, bus->mmio + offset);
+}
+
+static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
+{
+ struct ssb_bus *bus = dev->bus;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ writel(value, bus->mmio + offset);
+}
+
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_ssb_block_write(struct ssb_device *dev, const void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ struct ssb_bus *bus = dev->bus;
+ void __iomem *addr;
+
+ offset += dev->core_index * SSB_CORE_SIZE;
+ addr = bus->mmio + offset;
+
+ switch (reg_width) {
+ case sizeof(u8): {
+ const u8 *buf = buffer;
+
+ while (count) {
+ __raw_writeb(*buf, addr);
+ buf++;
+ count--;
+ }
+ break;
+ }
+ case sizeof(u16): {
+ const __le16 *buf = buffer;
+
+ SSB_WARN_ON(count & 1);
+ while (count) {
+ __raw_writew((__force u16)(*buf), addr);
+ buf++;
+ count -= 2;
+ }
+ break;
+ }
+ case sizeof(u32): {
+ const __le32 *buf = buffer;
+
+ SSB_WARN_ON(count & 3);
+ while (count) {
+ __raw_writel((__force u32)(*buf), addr);
+ buf++;
+ count -= 4;
+ }
+ break;
+ }
+ default:
+ SSB_WARN_ON(1);
+ }
+}
+#endif /* CONFIG_SSB_BLOCKIO */
+
+/* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
+static const struct ssb_bus_ops ssb_ssb_ops = {
+ .read8 = ssb_ssb_read8,
+ .read16 = ssb_ssb_read16,
+ .read32 = ssb_ssb_read32,
+ .write8 = ssb_ssb_write8,
+ .write16 = ssb_ssb_write16,
+ .write32 = ssb_ssb_write32,
+#ifdef CONFIG_SSB_BLOCKIO
+ .block_read = ssb_ssb_block_read,
+ .block_write = ssb_ssb_block_write,
+#endif
+};
+
+static int ssb_fetch_invariants(struct ssb_bus *bus,
+ ssb_invariants_func_t get_invariants)
+{
+ struct ssb_init_invariants iv;
+ int err;
+
+ memset(&iv, 0, sizeof(iv));
+ err = get_invariants(bus, &iv);
+ if (err)
+ goto out;
+ memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
+ memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
+ bus->has_cardbus_slot = iv.has_cardbus_slot;
+out:
+ return err;
+}
+
+static int ssb_bus_register(struct ssb_bus *bus,
+ ssb_invariants_func_t get_invariants,
+ unsigned long baseaddr)
+{
+ int err;
+
+ spin_lock_init(&bus->bar_lock);
+ INIT_LIST_HEAD(&bus->list);
+#ifdef CONFIG_SSB_EMBEDDED
+ spin_lock_init(&bus->gpio_lock);
+#endif
+
+ /* Powerup the bus */
+ err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
+ if (err)
+ goto out;
+
+ /* Init SDIO-host device (if any), before the scan */
+ err = ssb_sdio_init(bus);
+ if (err)
+ goto err_disable_xtal;
+
+ ssb_buses_lock();
+ bus->busnumber = next_busnumber;
+ /* Scan for devices (cores) */
+ err = ssb_bus_scan(bus, baseaddr);
+ if (err)
+ goto err_sdio_exit;
+
+ /* Init PCI-host device (if any) */
+ err = ssb_pci_init(bus);
+ if (err)
+ goto err_unmap;
+ /* Init PCMCIA-host device (if any) */
+ err = ssb_pcmcia_init(bus);
+ if (err)
+ goto err_pci_exit;
+
+ /* Initialize basic system devices (if available) */
+ err = ssb_bus_powerup(bus, 0);
+ if (err)
+ goto err_pcmcia_exit;
+ ssb_chipcommon_init(&bus->chipco);
+ ssb_extif_init(&bus->extif);
+ ssb_mipscore_init(&bus->mipscore);
+ err = ssb_fetch_invariants(bus, get_invariants);
+ if (err) {
+ ssb_bus_may_powerdown(bus);
+ goto err_pcmcia_exit;
+ }
+ ssb_bus_may_powerdown(bus);
+
+ /* Queue it for attach.
+ * See the comment at the ssb_is_early_boot definition. */
+ list_add_tail(&bus->list, &attach_queue);
+ if (!ssb_is_early_boot) {
+ /* This is not early boot, so we must attach the bus now */
+ err = ssb_attach_queued_buses();
+ if (err)
+ goto err_dequeue;
+ }
+ next_busnumber++;
+ ssb_buses_unlock();
+
+out:
+ return err;
+
+err_dequeue:
+ list_del(&bus->list);
+err_pcmcia_exit:
+ ssb_pcmcia_exit(bus);
+err_pci_exit:
+ ssb_pci_exit(bus);
+err_unmap:
+ ssb_iounmap(bus);
+err_sdio_exit:
+ ssb_sdio_exit(bus);
+err_disable_xtal:
+ ssb_buses_unlock();
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
+ return err;
+}
+
+#ifdef CONFIG_SSB_PCIHOST
+int ssb_bus_pcibus_register(struct ssb_bus *bus, struct pci_dev *host_pci)
+{
+ int err;
+
+ bus->bustype = SSB_BUSTYPE_PCI;
+ bus->host_pci = host_pci;
+ bus->ops = &ssb_pci_ops;
+
+ err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
+ if (!err) {
+ ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
+ dev_name(&host_pci->dev));
+ } else {
+ ssb_err("Failed to register PCI version of SSB with error %d\n",
+ err);
+ }
+
+ return err;
+}
+EXPORT_SYMBOL(ssb_bus_pcibus_register);
+#endif /* CONFIG_SSB_PCIHOST */
+
+#ifdef CONFIG_SSB_PCMCIAHOST
+int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
+ struct pcmcia_device *pcmcia_dev,
+ unsigned long baseaddr)
+{
+ int err;
+
+ bus->bustype = SSB_BUSTYPE_PCMCIA;
+ bus->host_pcmcia = pcmcia_dev;
+ bus->ops = &ssb_pcmcia_ops;
+
+ err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
+ if (!err) {
+ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
+ pcmcia_dev->devname);
+ }
+
+ return err;
+}
+EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
+#ifdef CONFIG_SSB_SDIOHOST
+int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
+ unsigned int quirks)
+{
+ int err;
+
+ bus->bustype = SSB_BUSTYPE_SDIO;
+ bus->host_sdio = func;
+ bus->ops = &ssb_sdio_ops;
+ bus->quirks = quirks;
+
+ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ if (!err) {
+ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
+ sdio_func_id(func));
+ }
+
+ return err;
+}
+EXPORT_SYMBOL(ssb_bus_sdiobus_register);
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
+int ssb_bus_ssbbus_register(struct ssb_bus *bus, unsigned long baseaddr,
+ ssb_invariants_func_t get_invariants)
+{
+ int err;
+
+ bus->bustype = SSB_BUSTYPE_SSB;
+ bus->ops = &ssb_ssb_ops;
+
+ err = ssb_bus_register(bus, get_invariants, baseaddr);
+ if (!err) {
+ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
+ baseaddr);
+ }
+
+ return err;
+}
+
+int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
+{
+ drv->drv.name = drv->name;
+ drv->drv.bus = &ssb_bustype;
+ drv->drv.owner = owner;
+
+ return driver_register(&drv->drv);
+}
+EXPORT_SYMBOL(__ssb_driver_register);
+
+void ssb_driver_unregister(struct ssb_driver *drv)
+{
+ driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL(ssb_driver_unregister);
+
+void ssb_set_devtypedata(struct ssb_device *dev, void *data)
+{
+ struct ssb_bus *bus = dev->bus;
+ struct ssb_device *ent;
+ int i;
+
+ for (i = 0; i < bus->nr_devices; i++) {
+ ent = &(bus->devices[i]);
+ if (ent->id.vendor != dev->id.vendor)
+ continue;
+ if (ent->id.coreid != dev->id.coreid)
+ continue;
+
+ ent->devtypedata = data;
+ }
+}
+EXPORT_SYMBOL(ssb_set_devtypedata);
+
+static u32 clkfactor_f6_resolve(u32 v)
+{
+ /* map the magic values */
+ switch (v) {
+ case SSB_CHIPCO_CLK_F6_2:
+ return 2;
+ case SSB_CHIPCO_CLK_F6_3:
+ return 3;
+ case SSB_CHIPCO_CLK_F6_4:
+ return 4;
+ case SSB_CHIPCO_CLK_F6_5:
+ return 5;
+ case SSB_CHIPCO_CLK_F6_6:
+ return 6;
+ case SSB_CHIPCO_CLK_F6_7:
+ return 7;
+ }
+ return 0;
+}
+
+/* Calculate the speed the backplane would run at a given set of clockcontrol values */
+u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
+{
+ u32 n1, n2, clock, m1, m2, m3, mc;
+
+ n1 = (n & SSB_CHIPCO_CLK_N1);
+ n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
+
+ switch (plltype) {
+ case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
+ if (m & SSB_CHIPCO_CLK_T6_MMASK)
+ return SSB_CHIPCO_CLK_T6_M1;
+ return SSB_CHIPCO_CLK_T6_M0;
+ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
+ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
+ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
+ case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
+ n1 = clkfactor_f6_resolve(n1);
+ n2 += SSB_CHIPCO_CLK_F5_BIAS;
+ break;
+ case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
+ n1 += SSB_CHIPCO_CLK_T2_BIAS;
+ n2 += SSB_CHIPCO_CLK_T2_BIAS;
+ SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
+ SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
+ break;
+ case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
+ return 100000000;
+ default:
+ SSB_WARN_ON(1);
+ }
+
+ switch (plltype) {
+ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
+ case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
+ clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
+ break;
+ default:
+ clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
+ }
+ if (!clock)
+ return 0;
+
+ m1 = (m & SSB_CHIPCO_CLK_M1);
+ m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
+ m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
+ mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
+
+ switch (plltype) {
+ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
+ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
+ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
+ case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
+ m1 = clkfactor_f6_resolve(m1);
+ if ((plltype == SSB_PLLTYPE_1) ||
+ (plltype == SSB_PLLTYPE_3))
+ m2 += SSB_CHIPCO_CLK_F5_BIAS;
+ else
+ m2 = clkfactor_f6_resolve(m2);
+ m3 = clkfactor_f6_resolve(m3);
+
+ switch (mc) {
+ case SSB_CHIPCO_CLK_MC_BYPASS:
+ return clock;
+ case SSB_CHIPCO_CLK_MC_M1:
+ return (clock / m1);
+ case SSB_CHIPCO_CLK_MC_M1M2:
+ return (clock / (m1 * m2));
+ case SSB_CHIPCO_CLK_MC_M1M2M3:
+ return (clock / (m1 * m2 * m3));
+ case SSB_CHIPCO_CLK_MC_M1M3:
+ return (clock / (m1 * m3));
+ }
+ return 0;
+ case SSB_PLLTYPE_2:
+ m1 += SSB_CHIPCO_CLK_T2_BIAS;
+ m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
+ m3 += SSB_CHIPCO_CLK_T2_BIAS;
+ SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
+ SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
+ SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
+
+ if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
+ clock /= m1;
+ if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
+ clock /= m2;
+ if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
+ clock /= m3;
+ return clock;
+ default:
+ SSB_WARN_ON(1);
+ }
+ return 0;
+}
+
+/* Get the current speed the backplane is running at */
+u32 ssb_clockspeed(struct ssb_bus *bus)
+{
+ u32 rate;
+ u32 plltype;
+ u32 clkctl_n, clkctl_m;
+
+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
+ return ssb_pmu_get_controlclock(&bus->chipco);
+
+ if (ssb_extif_available(&bus->extif))
+ ssb_extif_get_clockcontrol(&bus->extif, &plltype,
+ &clkctl_n, &clkctl_m);
+ else if (bus->chipco.dev)
+ ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
+ &clkctl_n, &clkctl_m);
+ else
+ return 0;
+
+ if (bus->chip_id == 0x5365) {
+ rate = 100000000;
+ } else {
+ rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
+ if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
+ rate /= 2;
+ }
+
+ return rate;
+}
+EXPORT_SYMBOL(ssb_clockspeed);
+
+static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
+{
+ u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
+
+ /* The REJECT bit seems to be different for Backplane rev 2.3 */
+ switch (rev) {
+ case SSB_IDLOW_SSBREV_22:
+ case SSB_IDLOW_SSBREV_24:
+ case SSB_IDLOW_SSBREV_26:
+ return SSB_TMSLOW_REJECT;
+ case SSB_IDLOW_SSBREV_23:
+ return SSB_TMSLOW_REJECT_23;
+ case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
+ case SSB_IDLOW_SSBREV_27: /* same here */
+ return SSB_TMSLOW_REJECT; /* this is a guess */
+ case SSB_IDLOW_SSBREV:
+ break;
+ default:
+ WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
+ }
+ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
+}
+
+int ssb_device_is_enabled(struct ssb_device *dev)
+{
+ u32 val;
+ u32 reject;
+
+ reject = ssb_tmslow_reject_bitmask(dev);
+ val = ssb_read32(dev, SSB_TMSLOW);
+ val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
+
+ return (val == SSB_TMSLOW_CLOCK);
+}
+EXPORT_SYMBOL(ssb_device_is_enabled);
+
+static void ssb_flush_tmslow(struct ssb_device *dev)
+{
+ /* Make _really_ sure the device has finished the TMSLOW
+ * register write transaction, as we risk running into
+ * a machine check exception otherwise.
+ * Do this by reading the register back to commit the
+ * PCI write and delay an additional usec for the device
+ * to react to the change. */
+ ssb_read32(dev, SSB_TMSLOW);
+ udelay(1);
+}
+
+void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
+{
+ u32 val;
+
+ ssb_device_disable(dev, core_specific_flags);
+ ssb_write32(dev, SSB_TMSLOW,
+ SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
+ SSB_TMSLOW_FGC | core_specific_flags);
+ ssb_flush_tmslow(dev);
+
+ /* Clear SERR if set. This is a hw bug workaround. */
+ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
+ ssb_write32(dev, SSB_TMSHIGH, 0);
+
+ val = ssb_read32(dev, SSB_IMSTATE);
+ if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
+ val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
+ ssb_write32(dev, SSB_IMSTATE, val);
+ }
+
+ ssb_write32(dev, SSB_TMSLOW,
+ SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
+ core_specific_flags);
+ ssb_flush_tmslow(dev);
+
+ ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
+ core_specific_flags);
+ ssb_flush_tmslow(dev);
+}
+EXPORT_SYMBOL(ssb_device_enable);
+
+/* Wait for bitmask in a register to get set or cleared.
+ * timeout is in units of ten-microseconds */
+static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
+ int timeout, int set)
+{
+ int i;
+ u32 val;
+
+ for (i = 0; i < timeout; i++) {
+ val = ssb_read32(dev, reg);
+ if (set) {
+ if ((val & bitmask) == bitmask)
+ return 0;
+ } else {
+ if (!(val & bitmask))
+ return 0;
+ }
+ udelay(10);
+ }
+ printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
+ "register %04X to %s.\n",
+ bitmask, reg, (set ? "set" : "clear"));
+
+ return -ETIMEDOUT;
+}
+
+void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
+{
+ u32 reject, val;
+
+ if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
+ return;
+
+ reject = ssb_tmslow_reject_bitmask(dev);
+
+ if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
+ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
+ ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
+ ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
+
+ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
+ val = ssb_read32(dev, SSB_IMSTATE);
+ val |= SSB_IMSTATE_REJECT;
+ ssb_write32(dev, SSB_IMSTATE, val);
+ ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
+ 0);
+ }
+
+ ssb_write32(dev, SSB_TMSLOW,
+ SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+ reject | SSB_TMSLOW_RESET |
+ core_specific_flags);
+ ssb_flush_tmslow(dev);
+
+ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
+ val = ssb_read32(dev, SSB_IMSTATE);
+ val &= ~SSB_IMSTATE_REJECT;
+ ssb_write32(dev, SSB_IMSTATE, val);
+ }
+ }
+
+ ssb_write32(dev, SSB_TMSLOW,
+ reject | SSB_TMSLOW_RESET |
+ core_specific_flags);
+ ssb_flush_tmslow(dev);
+}
+EXPORT_SYMBOL(ssb_device_disable);
+
+/* Some chipsets need routing known for PCIe and 64-bit DMA */
+static bool ssb_dma_translation_special_bit(struct ssb_device *dev)
+{
+ u16 chip_id = dev->bus->chip_id;
+
+ if (dev->id.coreid == SSB_DEV_80211) {
+ return (chip_id == 0x4322 || chip_id == 43221 ||
+ chip_id == 43231 || chip_id == 43222);
+ }
+
+ return 0;
+}
+
+u32 ssb_dma_translation(struct ssb_device *dev)
+{
+ switch (dev->bus->bustype) {
+ case SSB_BUSTYPE_SSB:
+ return 0;
+ case SSB_BUSTYPE_PCI:
+ if (pci_is_pcie(dev->bus->host_pci) &&
+ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) {
+ return SSB_PCIE_DMA_H32;
+ } else {
+ if (ssb_dma_translation_special_bit(dev))
+ return SSB_PCIE_DMA_H32;
+ else
+ return SSB_PCI_DMA;
+ }
+ default:
+ __ssb_dma_not_implemented(dev);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(ssb_dma_translation);
+
+int ssb_bus_may_powerdown(struct ssb_bus *bus)
+{
+ struct ssb_chipcommon *cc;
+ int err = 0;
+
+ /* On buses where more than one core may be working
+ * at a time, we must not powerdown stuff if there are
+ * still cores that may want to run. */
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ goto out;
+
+ cc = &bus->chipco;
+
+ if (!cc->dev)
+ goto out;
+ if (cc->dev->id.revision < 5)
+ goto out;
+
+ ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
+ err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
+ if (err)
+ goto error;
+out:
+#ifdef CONFIG_SSB_DEBUG
+ bus->powered_up = 0;
+#endif
+ return err;
+error:
+ ssb_err("Bus powerdown failed\n");
+ goto out;
+}
+EXPORT_SYMBOL(ssb_bus_may_powerdown);
+
+int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
+{
+ int err;
+ enum ssb_clkmode mode;
+
+ err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
+ if (err)
+ goto error;
+
+#ifdef CONFIG_SSB_DEBUG
+ bus->powered_up = 1;
+#endif
+
+ mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
+ ssb_chipco_set_clockmode(&bus->chipco, mode);
+
+ return 0;
+error:
+ ssb_err("Bus powerup failed\n");
+ return err;
+}
+EXPORT_SYMBOL(ssb_bus_powerup);
+
+static void ssb_broadcast_value(struct ssb_device *dev,
+ u32 address, u32 data)
+{
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+ /* This is used for both, PCI and ChipCommon core, so be careful. */
+ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
+ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+#endif
+
+ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
+ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
+ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
+ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
+}
+
+void ssb_commit_settings(struct ssb_bus *bus)
+{
+ struct ssb_device *dev;
+
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
+#else
+ dev = bus->chipco.dev;
+#endif
+ if (WARN_ON(!dev))
+ return;
+ /* This forces an update of the cached registers. */
+ ssb_broadcast_value(dev, 0xFD8, 0);
+}
+EXPORT_SYMBOL(ssb_commit_settings);
+
+u32 ssb_admatch_base(u32 adm)
+{
+ u32 base = 0;
+
+ switch (adm & SSB_ADM_TYPE) {
+ case SSB_ADM_TYPE0:
+ base = (adm & SSB_ADM_BASE0);
+ break;
+ case SSB_ADM_TYPE1:
+ SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
+ base = (adm & SSB_ADM_BASE1);
+ break;
+ case SSB_ADM_TYPE2:
+ SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
+ base = (adm & SSB_ADM_BASE2);
+ break;
+ default:
+ SSB_WARN_ON(1);
+ }
+
+ return base;
+}
+EXPORT_SYMBOL(ssb_admatch_base);
+
+u32 ssb_admatch_size(u32 adm)
+{
+ u32 size = 0;
+
+ switch (adm & SSB_ADM_TYPE) {
+ case SSB_ADM_TYPE0:
+ size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
+ break;
+ case SSB_ADM_TYPE1:
+ SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
+ size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
+ break;
+ case SSB_ADM_TYPE2:
+ SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
+ size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
+ break;
+ default:
+ SSB_WARN_ON(1);
+ }
+ size = (1 << (size + 1));
+
+ return size;
+}
+EXPORT_SYMBOL(ssb_admatch_size);
+
+static int __init ssb_modinit(void)
+{
+ int err;
+
+ /* See the comment at the ssb_is_early_boot definition */
+ ssb_is_early_boot = 0;
+ err = bus_register(&ssb_bustype);
+ if (err)
+ return err;
+
+ /* Maybe we already registered some buses at early boot.
+ * Check for this and attach them
+ */
+ ssb_buses_lock();
+ err = ssb_attach_queued_buses();
+ ssb_buses_unlock();
+ if (err) {
+ bus_unregister(&ssb_bustype);
+ goto out;
+ }
+
+ err = b43_pci_ssb_bridge_init();
+ if (err) {
+ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+ err = ssb_gige_init();
+ if (err) {
+ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+out:
+ return err;
+}
+/* ssb must be initialized after PCI but before the ssb drivers.
+ * That means we must use some initcall between subsys_initcall
+ * and device_initcall. */
+fs_initcall(ssb_modinit);
+
+static void __exit ssb_modexit(void)
+{
+ ssb_gige_exit();
+ b43_pci_ssb_bridge_exit();
+ bus_unregister(&ssb_bustype);
+}
+module_exit(ssb_modexit)