diff options
Diffstat (limited to 'drivers/staging/comedi/drivers/addi_apci_1032.c')
-rw-r--r-- | drivers/staging/comedi/drivers/addi_apci_1032.c | 394 |
1 files changed, 394 insertions, 0 deletions
diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c new file mode 100644 index 000000000..b37166d57 --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_1032.c @@ -0,0 +1,394 @@ +/* + * addi_apci_1032.c + * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + * Project manager: Eric Stolz + * + * ADDI-DATA GmbH + * Dieselstrasse 3 + * D-77833 Ottersweier + * Tel: +19(0)7223/9493-0 + * Fax: +49(0)7223/9493-92 + * http://www.addi-data.com + * info@addi-data.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +/* + * Driver: addi_apci_1032 + * Description: ADDI-DATA APCI-1032 Digital Input Board + * Author: ADDI-DATA GmbH <info@addi-data.com>, + * H Hartley Sweeten <hsweeten@visionengravers.com> + * Status: untested + * Devices: [ADDI-DATA] APCI-1032 (addi_apci_1032) + * + * Configuration options: + * None; devices are configured automatically. + * + * This driver models the APCI-1032 as a 32-channel, digital input subdevice + * plus an additional digital input subdevice to handle change-of-state (COS) + * interrupts (if an interrupt handler can be set up successfully). + * + * The COS subdevice supports comedi asynchronous read commands. + * + * Change-Of-State (COS) interrupt configuration: + * + * Channels 0 to 15 are interruptible. These channels can be configured + * to generate interrupts based on AND/OR logic for the desired channels. + * + * OR logic: + * - reacts to rising or falling edges + * - interrupt is generated when any enabled channel meets the desired + * interrupt condition + * + * AND logic: + * - reacts to changes in level of the selected inputs + * - interrupt is generated when all enabled channels meet the desired + * interrupt condition + * - after an interrupt, a change in level must occur on the selected + * inputs to release the IRQ logic + * + * The COS subdevice must be configured before setting up a comedi + * asynchronous command: + * + * data[0] : INSN_CONFIG_DIGITAL_TRIG + * data[1] : trigger number (= 0) + * data[2] : configuration operation: + * - COMEDI_DIGITAL_TRIG_DISABLE = no interrupts + * - COMEDI_DIGITAL_TRIG_ENABLE_EDGES = OR (edge) interrupts + * - COMEDI_DIGITAL_TRIG_ENABLE_LEVELS = AND (level) interrupts + * data[3] : left-shift for data[4] and data[5] + * data[4] : rising-edge/high level channels + * data[5] : falling-edge/low level channels + */ + +#include <linux/module.h> +#include <linux/interrupt.h> + +#include "../comedi_pci.h" +#include "amcc_s5933.h" + +/* + * I/O Register Map + */ +#define APCI1032_DI_REG 0x00 +#define APCI1032_MODE1_REG 0x04 +#define APCI1032_MODE2_REG 0x08 +#define APCI1032_STATUS_REG 0x0c +#define APCI1032_CTRL_REG 0x10 +#define APCI1032_CTRL_INT_OR (0 << 1) +#define APCI1032_CTRL_INT_AND (1 << 1) +#define APCI1032_CTRL_INT_ENA (1 << 2) + +struct apci1032_private { + unsigned long amcc_iobase; /* base of AMCC I/O registers */ + unsigned int mode1; /* rising-edge/high level channels */ + unsigned int mode2; /* falling-edge/low level channels */ + unsigned int ctrl; /* interrupt mode OR (edge) . AND (level) */ +}; + +static int apci1032_reset(struct comedi_device *dev) +{ + /* disable the interrupts */ + outl(0x0, dev->iobase + APCI1032_CTRL_REG); + /* Reset the interrupt status register */ + inl(dev->iobase + APCI1032_STATUS_REG); + /* Disable the and/or interrupt */ + outl(0x0, dev->iobase + APCI1032_MODE1_REG); + outl(0x0, dev->iobase + APCI1032_MODE2_REG); + + return 0; +} + +static int apci1032_cos_insn_config(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + struct apci1032_private *devpriv = dev->private; + unsigned int shift, oldmask; + + switch (data[0]) { + case INSN_CONFIG_DIGITAL_TRIG: + if (data[1] != 0) + return -EINVAL; + shift = data[3]; + oldmask = (1U << shift) - 1; + switch (data[2]) { + case COMEDI_DIGITAL_TRIG_DISABLE: + devpriv->ctrl = 0; + devpriv->mode1 = 0; + devpriv->mode2 = 0; + apci1032_reset(dev); + break; + case COMEDI_DIGITAL_TRIG_ENABLE_EDGES: + if (devpriv->ctrl != (APCI1032_CTRL_INT_ENA | + APCI1032_CTRL_INT_OR)) { + /* switching to 'OR' mode */ + devpriv->ctrl = APCI1032_CTRL_INT_ENA | + APCI1032_CTRL_INT_OR; + /* wipe old channels */ + devpriv->mode1 = 0; + devpriv->mode2 = 0; + } else { + /* preserve unspecified channels */ + devpriv->mode1 &= oldmask; + devpriv->mode2 &= oldmask; + } + /* configure specified channels */ + devpriv->mode1 |= data[4] << shift; + devpriv->mode2 |= data[5] << shift; + break; + case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS: + if (devpriv->ctrl != (APCI1032_CTRL_INT_ENA | + APCI1032_CTRL_INT_AND)) { + /* switching to 'AND' mode */ + devpriv->ctrl = APCI1032_CTRL_INT_ENA | + APCI1032_CTRL_INT_AND; + /* wipe old channels */ + devpriv->mode1 = 0; + devpriv->mode2 = 0; + } else { + /* preserve unspecified channels */ + devpriv->mode1 &= oldmask; + devpriv->mode2 &= oldmask; + } + /* configure specified channels */ + devpriv->mode1 |= data[4] << shift; + devpriv->mode2 |= data[5] << shift; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return insn->n; +} + +static int apci1032_cos_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + data[1] = s->state; + + return 0; +} + +static int apci1032_cos_cmdtest(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_cmd *cmd) +{ + int err = 0; + + /* Step 1 : check if triggers are trivially valid */ + + err |= comedi_check_trigger_src(&cmd->start_src, TRIG_NOW); + err |= comedi_check_trigger_src(&cmd->scan_begin_src, TRIG_EXT); + err |= comedi_check_trigger_src(&cmd->convert_src, TRIG_FOLLOW); + err |= comedi_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT); + err |= comedi_check_trigger_src(&cmd->stop_src, TRIG_NONE); + + if (err) + return 1; + + /* Step 2a : make sure trigger sources are unique */ + /* Step 2b : and mutually compatible */ + + /* Step 3: check if arguments are trivially valid */ + + err |= comedi_check_trigger_arg_is(&cmd->start_arg, 0); + err |= comedi_check_trigger_arg_is(&cmd->scan_begin_arg, 0); + err |= comedi_check_trigger_arg_is(&cmd->convert_arg, 0); + err |= comedi_check_trigger_arg_is(&cmd->scan_end_arg, + cmd->chanlist_len); + err |= comedi_check_trigger_arg_is(&cmd->stop_arg, 0); + + if (err) + return 3; + + /* Step 4: fix up any arguments */ + + /* Step 5: check channel list if it exists */ + + return 0; +} + +/* + * Change-Of-State (COS) 'do_cmd' operation + * + * Enable the COS interrupt as configured by apci1032_cos_insn_config(). + */ +static int apci1032_cos_cmd(struct comedi_device *dev, + struct comedi_subdevice *s) +{ + struct apci1032_private *devpriv = dev->private; + + if (!devpriv->ctrl) { + dev_warn(dev->class_dev, + "Interrupts disabled due to mode configuration!\n"); + return -EINVAL; + } + + outl(devpriv->mode1, dev->iobase + APCI1032_MODE1_REG); + outl(devpriv->mode2, dev->iobase + APCI1032_MODE2_REG); + outl(devpriv->ctrl, dev->iobase + APCI1032_CTRL_REG); + + return 0; +} + +static int apci1032_cos_cancel(struct comedi_device *dev, + struct comedi_subdevice *s) +{ + return apci1032_reset(dev); +} + +static irqreturn_t apci1032_interrupt(int irq, void *d) +{ + struct comedi_device *dev = d; + struct apci1032_private *devpriv = dev->private; + struct comedi_subdevice *s = dev->read_subdev; + unsigned int ctrl; + + /* check interrupt is from this device */ + if ((inl(devpriv->amcc_iobase + AMCC_OP_REG_INTCSR) & + INTCSR_INTR_ASSERTED) == 0) + return IRQ_NONE; + + /* check interrupt is enabled */ + ctrl = inl(dev->iobase + APCI1032_CTRL_REG); + if ((ctrl & APCI1032_CTRL_INT_ENA) == 0) + return IRQ_HANDLED; + + /* disable the interrupt */ + outl(ctrl & ~APCI1032_CTRL_INT_ENA, dev->iobase + APCI1032_CTRL_REG); + + s->state = inl(dev->iobase + APCI1032_STATUS_REG) & 0xffff; + comedi_buf_write_samples(s, &s->state, 1); + comedi_handle_events(dev, s); + + /* enable the interrupt */ + outl(ctrl, dev->iobase + APCI1032_CTRL_REG); + + return IRQ_HANDLED; +} + +static int apci1032_di_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + data[1] = inl(dev->iobase + APCI1032_DI_REG); + + return insn->n; +} + +static int apci1032_auto_attach(struct comedi_device *dev, + unsigned long context_unused) +{ + struct pci_dev *pcidev = comedi_to_pci_dev(dev); + struct apci1032_private *devpriv; + struct comedi_subdevice *s; + int ret; + + devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv)); + if (!devpriv) + return -ENOMEM; + + ret = comedi_pci_enable(dev); + if (ret) + return ret; + + devpriv->amcc_iobase = pci_resource_start(pcidev, 0); + dev->iobase = pci_resource_start(pcidev, 1); + apci1032_reset(dev); + if (pcidev->irq > 0) { + ret = request_irq(pcidev->irq, apci1032_interrupt, IRQF_SHARED, + dev->board_name, dev); + if (ret == 0) + dev->irq = pcidev->irq; + } + + ret = comedi_alloc_subdevices(dev, 2); + if (ret) + return ret; + + /* Allocate and Initialise DI Subdevice Structures */ + s = &dev->subdevices[0]; + s->type = COMEDI_SUBD_DI; + s->subdev_flags = SDF_READABLE; + s->n_chan = 32; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = apci1032_di_insn_bits; + + /* Change-Of-State (COS) interrupt subdevice */ + s = &dev->subdevices[1]; + if (dev->irq) { + dev->read_subdev = s; + s->type = COMEDI_SUBD_DI; + s->subdev_flags = SDF_READABLE | SDF_CMD_READ; + s->n_chan = 1; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_config = apci1032_cos_insn_config; + s->insn_bits = apci1032_cos_insn_bits; + s->len_chanlist = 1; + s->do_cmdtest = apci1032_cos_cmdtest; + s->do_cmd = apci1032_cos_cmd; + s->cancel = apci1032_cos_cancel; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + return 0; +} + +static void apci1032_detach(struct comedi_device *dev) +{ + if (dev->iobase) + apci1032_reset(dev); + comedi_pci_detach(dev); +} + +static struct comedi_driver apci1032_driver = { + .driver_name = "addi_apci_1032", + .module = THIS_MODULE, + .auto_attach = apci1032_auto_attach, + .detach = apci1032_detach, +}; + +static int apci1032_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + return comedi_pci_auto_config(dev, &apci1032_driver, id->driver_data); +} + +static const struct pci_device_id apci1032_pci_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1003) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, apci1032_pci_table); + +static struct pci_driver apci1032_pci_driver = { + .name = "addi_apci_1032", + .id_table = apci1032_pci_table, + .probe = apci1032_pci_probe, + .remove = comedi_pci_auto_unconfig, +}; +module_comedi_pci_driver(apci1032_driver, apci1032_pci_driver); + +MODULE_AUTHOR("Comedi http://www.comedi.org"); +MODULE_DESCRIPTION("ADDI-DATA APCI-1032, 32 channel DI boards"); +MODULE_LICENSE("GPL"); |