diff options
Diffstat (limited to 'drivers/staging/comedi/drivers/multiq3.c')
| -rw-r--r-- | drivers/staging/comedi/drivers/multiq3.c | 289 |
1 files changed, 289 insertions, 0 deletions
diff --git a/drivers/staging/comedi/drivers/multiq3.c b/drivers/staging/comedi/drivers/multiq3.c new file mode 100644 index 000000000..847121921 --- /dev/null +++ b/drivers/staging/comedi/drivers/multiq3.c @@ -0,0 +1,289 @@ +/* + comedi/drivers/multiq3.c + Hardware driver for Quanser Consulting MultiQ-3 board + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 1999 Anders Blomdell <anders.blomdell@control.lth.se> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + */ +/* +Driver: multiq3 +Description: Quanser Consulting MultiQ-3 +Author: Anders Blomdell <anders.blomdell@control.lth.se> +Status: works +Devices: [Quanser Consulting] MultiQ-3 (multiq3) + +*/ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include "../comedidev.h" + +/* + * MULTIQ-3 port offsets + */ +#define MULTIQ3_DIGIN_PORT 0 +#define MULTIQ3_DIGOUT_PORT 0 +#define MULTIQ3_DAC_DATA 2 +#define MULTIQ3_AD_DATA 4 +#define MULTIQ3_AD_CS 4 +#define MULTIQ3_STATUS 6 +#define MULTIQ3_CONTROL 6 +#define MULTIQ3_CLK_DATA 8 +#define MULTIQ3_ENC_DATA 12 +#define MULTIQ3_ENC_CONTROL 14 + +/* + * flags for CONTROL register + */ +#define MULTIQ3_AD_MUX_EN 0x0040 +#define MULTIQ3_AD_AUTOZ 0x0080 +#define MULTIQ3_AD_AUTOCAL 0x0100 +#define MULTIQ3_AD_SH 0x0200 +#define MULTIQ3_AD_CLOCK_4M 0x0400 +#define MULTIQ3_DA_LOAD 0x1800 + +#define MULTIQ3_CONTROL_MUST 0x0600 + +/* + * flags for STATUS register + */ +#define MULTIQ3_STATUS_EOC 0x008 +#define MULTIQ3_STATUS_EOC_I 0x010 + +/* + * flags for encoder control + */ +#define MULTIQ3_CLOCK_DATA 0x00 +#define MULTIQ3_CLOCK_SETUP 0x18 +#define MULTIQ3_INPUT_SETUP 0x41 +#define MULTIQ3_QUAD_X4 0x38 +#define MULTIQ3_BP_RESET 0x01 +#define MULTIQ3_CNTR_RESET 0x02 +#define MULTIQ3_TRSFRPR_CTR 0x08 +#define MULTIQ3_TRSFRCNTR_OL 0x10 +#define MULTIQ3_EFLAG_RESET 0x06 + +#define MULTIQ3_TIMEOUT 30 + +static int multiq3_ai_status(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned long context) +{ + unsigned int status; + + status = inw(dev->iobase + MULTIQ3_STATUS); + if (status & context) + return 0; + return -EBUSY; +} + +static int multiq3_ai_insn_read(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) +{ + int n; + int chan; + unsigned int hi, lo; + int ret; + + chan = CR_CHAN(insn->chanspec); + outw(MULTIQ3_CONTROL_MUST | MULTIQ3_AD_MUX_EN | (chan << 3), + dev->iobase + MULTIQ3_CONTROL); + + ret = comedi_timeout(dev, s, insn, multiq3_ai_status, + MULTIQ3_STATUS_EOC); + if (ret) + return ret; + + for (n = 0; n < insn->n; n++) { + outw(0, dev->iobase + MULTIQ3_AD_CS); + + ret = comedi_timeout(dev, s, insn, multiq3_ai_status, + MULTIQ3_STATUS_EOC_I); + if (ret) + return ret; + + hi = inb(dev->iobase + MULTIQ3_AD_CS); + lo = inb(dev->iobase + MULTIQ3_AD_CS); + data[n] = (((hi << 8) | lo) + 0x1000) & 0x1fff; + } + + return n; +} + +static int multiq3_ao_insn_write(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + unsigned int chan = CR_CHAN(insn->chanspec); + unsigned int val = s->readback[chan]; + int i; + + for (i = 0; i < insn->n; i++) { + val = data[i]; + outw(MULTIQ3_CONTROL_MUST | MULTIQ3_DA_LOAD | chan, + dev->iobase + MULTIQ3_CONTROL); + outw(val, dev->iobase + MULTIQ3_DAC_DATA); + outw(MULTIQ3_CONTROL_MUST, dev->iobase + MULTIQ3_CONTROL); + } + s->readback[chan] = val; + + return insn->n; +} + +static int multiq3_di_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) +{ + data[1] = inw(dev->iobase + MULTIQ3_DIGIN_PORT); + + return insn->n; +} + +static int multiq3_do_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + if (comedi_dio_update_state(s, data)) + outw(s->state, dev->iobase + MULTIQ3_DIGOUT_PORT); + + data[1] = s->state; + + return insn->n; +} + +static int multiq3_encoder_insn_read(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + int chan = CR_CHAN(insn->chanspec); + int control = MULTIQ3_CONTROL_MUST | MULTIQ3_AD_MUX_EN | (chan << 3); + int value; + int n; + + for (n = 0; n < insn->n; n++) { + outw(control, dev->iobase + MULTIQ3_CONTROL); + outb(MULTIQ3_BP_RESET, dev->iobase + MULTIQ3_ENC_CONTROL); + outb(MULTIQ3_TRSFRCNTR_OL, dev->iobase + MULTIQ3_ENC_CONTROL); + value = inb(dev->iobase + MULTIQ3_ENC_DATA); + value |= (inb(dev->iobase + MULTIQ3_ENC_DATA) << 8); + value |= (inb(dev->iobase + MULTIQ3_ENC_DATA) << 16); + data[n] = (value + 0x800000) & 0xffffff; + } + + return n; +} + +static void encoder_reset(struct comedi_device *dev) +{ + struct comedi_subdevice *s = &dev->subdevices[4]; + int chan; + + for (chan = 0; chan < s->n_chan; chan++) { + int control = + MULTIQ3_CONTROL_MUST | MULTIQ3_AD_MUX_EN | (chan << 3); + outw(control, dev->iobase + MULTIQ3_CONTROL); + outb(MULTIQ3_EFLAG_RESET, dev->iobase + MULTIQ3_ENC_CONTROL); + outb(MULTIQ3_BP_RESET, dev->iobase + MULTIQ3_ENC_CONTROL); + outb(MULTIQ3_CLOCK_DATA, dev->iobase + MULTIQ3_ENC_DATA); + outb(MULTIQ3_CLOCK_SETUP, dev->iobase + MULTIQ3_ENC_CONTROL); + outb(MULTIQ3_INPUT_SETUP, dev->iobase + MULTIQ3_ENC_CONTROL); + outb(MULTIQ3_QUAD_X4, dev->iobase + MULTIQ3_ENC_CONTROL); + outb(MULTIQ3_CNTR_RESET, dev->iobase + MULTIQ3_ENC_CONTROL); + } +} + +static int multiq3_attach(struct comedi_device *dev, + struct comedi_devconfig *it) +{ + struct comedi_subdevice *s; + int ret; + + ret = comedi_request_region(dev, it->options[0], 0x10); + if (ret) + return ret; + + ret = comedi_alloc_subdevices(dev, 5); + if (ret) + return ret; + + s = &dev->subdevices[0]; + /* ai subdevice */ + s->type = COMEDI_SUBD_AI; + s->subdev_flags = SDF_READABLE | SDF_GROUND; + s->n_chan = 8; + s->insn_read = multiq3_ai_insn_read; + s->maxdata = 0x1fff; + s->range_table = &range_bipolar5; + + s = &dev->subdevices[1]; + /* ao subdevice */ + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = 8; + s->maxdata = 0xfff; + s->range_table = &range_bipolar5; + s->insn_write = multiq3_ao_insn_write; + + ret = comedi_alloc_subdev_readback(s); + if (ret) + return ret; + + s = &dev->subdevices[2]; + /* di subdevice */ + s->type = COMEDI_SUBD_DI; + s->subdev_flags = SDF_READABLE; + s->n_chan = 16; + s->insn_bits = multiq3_di_insn_bits; + s->maxdata = 1; + s->range_table = &range_digital; + + s = &dev->subdevices[3]; + /* do subdevice */ + s->type = COMEDI_SUBD_DO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = 16; + s->insn_bits = multiq3_do_insn_bits; + s->maxdata = 1; + s->range_table = &range_digital; + s->state = 0; + + s = &dev->subdevices[4]; + /* encoder (counter) subdevice */ + s->type = COMEDI_SUBD_COUNTER; + s->subdev_flags = SDF_READABLE | SDF_LSAMPL; + s->n_chan = it->options[2] * 2; + s->insn_read = multiq3_encoder_insn_read; + s->maxdata = 0xffffff; + s->range_table = &range_unknown; + + encoder_reset(dev); + + return 0; +} + +static struct comedi_driver multiq3_driver = { + .driver_name = "multiq3", + .module = THIS_MODULE, + .attach = multiq3_attach, + .detach = comedi_legacy_detach, +}; +module_comedi_driver(multiq3_driver); + +MODULE_AUTHOR("Comedi http://www.comedi.org"); +MODULE_DESCRIPTION("Comedi low-level driver"); +MODULE_LICENSE("GPL"); |