1 files changed, 128 insertions, 0 deletions
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
new file mode 100644
index 000000000..a1c69ac07
--- /dev/null
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -0,0 +1,128 @@
+/*
+    comedi/drivers/ni_labpc_cs.c
+    Driver for National Instruments daqcard-1200 boards
+    Copyright (C) 2001, 2002, 2003 Frank Mori Hess <fmhess@users.sourceforge.net>
+
+    PCMCIA crap is adapted from dummy_cs.c 1.31 2001/08/24 12:13:13
+    from the pcmcia package.
+    The initial developer of the pcmcia dummy_cs.c code is David A. Hinds
+    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+    are Copyright (C) 1999 David A. Hinds.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+/*
+Driver: ni_labpc_cs
+Description: National Instruments Lab-PC (& compatibles)
+Author: Frank Mori Hess <fmhess@users.sourceforge.net>
+Devices: [National Instruments] DAQCard-1200 (daqcard-1200)
+Status: works
+
+Thanks go to Fredrik Lingvall for much testing and perseverance in
+helping to debug daqcard-1200 support.
+
+The 1200 series boards have onboard calibration dacs for correcting
+analog input/output offsets and gains.  The proper settings for these
+caldacs are stored on the board's eeprom.  To read the caldac values
+from the eeprom and store them into a file that can be then be used by
+comedilib, use the comedi_calibrate program.
+
+Configuration options:
+  none
+
+The daqcard-1200 has quirky chanlist requirements
+when scanning multiple channels.  Multiple channel scan
+sequence must start at highest channel, then decrement down to
+channel 0.  Chanlists consisting of all one channel
+are also legal, and allow you to pace conversions in bursts.
+
+*/
+
+/*
+
+NI manuals:
+340988a (daqcard-1200)
+
+*/
+
+#include <linux/module.h>
+
+#include "../comedi_pcmcia.h"
+
+#include "ni_labpc.h"
+
+static const struct labpc_boardinfo labpc_cs_boards[] = {
+	{
+		.name			= "daqcard-1200",
+		.ai_speed		= 10000,
+		.has_ao			= 1,
+		.is_labpc1200		= 1,
+	},
+};
+
+static int labpc_cs_auto_attach(struct comedi_device *dev,
+				unsigned long context)
+{
+	struct pcmcia_device *link = comedi_to_pcmcia_dev(dev);
+	int ret;
+
+	/* The ni_labpc driver needs the board_ptr */
+	dev->board_ptr = &labpc_cs_boards[0];
+
+	link->config_flags |= CONF_AUTO_SET_IO |
+			      CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
+	ret = comedi_pcmcia_enable(dev, NULL);
+	if (ret)
+		return ret;
+	dev->iobase = link->resource[0]->start;
+
+	if (!link->irq)
+		return -EINVAL;
+
+	return labpc_common_attach(dev, link->irq, IRQF_SHARED);
+}
+
+static void labpc_cs_detach(struct comedi_device *dev)
+{
+	labpc_common_detach(dev);
+	comedi_pcmcia_disable(dev);
+}
+
+static struct comedi_driver driver_labpc_cs = {
+	.driver_name	= "ni_labpc_cs",
+	.module		= THIS_MODULE,
+	.auto_attach	= labpc_cs_auto_attach,
+	.detach		= labpc_cs_detach,
+};
+
+static int labpc_cs_attach(struct pcmcia_device *link)
+{
+	return comedi_pcmcia_auto_config(link, &driver_labpc_cs);
+}
+
+static const struct pcmcia_device_id labpc_cs_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0103),	/* daqcard-1200 */
+	PCMCIA_DEVICE_NULL
+};
+MODULE_DEVICE_TABLE(pcmcia, labpc_cs_ids);
+
+static struct pcmcia_driver labpc_cs_driver = {
+	.name		= "daqcard-1200",
+	.owner		= THIS_MODULE,
+	.id_table	= labpc_cs_ids,
+	.probe		= labpc_cs_attach,
+	.remove		= comedi_pcmcia_auto_unconfig,
+};
+module_comedi_pcmcia_driver(driver_labpc_cs, labpc_cs_driver);
+
+MODULE_DESCRIPTION("Comedi driver for National Instruments Lab-PC");
+MODULE_AUTHOR("Frank Mori Hess <fmhess@users.sourceforge.net>");
+MODULE_LICENSE("GPL");