summaryrefslogtreecommitdiff
path: root/drivers/staging/iio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/iio')
-rw-r--r--drivers/staging/iio/Documentation/device.txt2
-rw-r--r--drivers/staging/iio/accel/Kconfig2
-rw-r--r--drivers/staging/iio/accel/sca3000_ring.c2
-rw-r--r--drivers/staging/iio/adc/Kconfig6
-rw-r--r--drivers/staging/iio/adc/ad7606_par.c2
-rw-r--r--drivers/staging/iio/addac/Kconfig2
-rw-r--r--drivers/staging/iio/iio_dummy_evgen.c4
-rw-r--r--drivers/staging/iio/iio_dummy_evgen.h2
-rw-r--r--drivers/staging/iio/iio_simple_dummy.c21
-rw-r--r--drivers/staging/iio/iio_simple_dummy.h10
-rw-r--r--drivers/staging/iio/iio_simple_dummy_events.c6
-rw-r--r--drivers/staging/iio/light/isl29018.c297
-rw-r--r--drivers/staging/iio/resolver/Kconfig4
13 files changed, 197 insertions, 163 deletions
diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt
index 8be32e5a0..54ef0deed 100644
--- a/drivers/staging/iio/Documentation/device.txt
+++ b/drivers/staging/iio/Documentation/device.txt
@@ -52,7 +52,7 @@ Then fill in the following:
* info->write_event_value:
Write the value associated with on sensor event detectors. E.g.
a threshold above which an interrupt occurs. Note that the
- meaning of the value to be set is event type dependant.
+ meaning of the value to be set is event type dependent.
- indio_dev->modes:
Specify whether direct access and / or ring buffer access is supported.
diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig
index 07b7ffa00..fa67da940 100644
--- a/drivers/staging/iio/accel/Kconfig
+++ b/drivers/staging/iio/accel/Kconfig
@@ -79,7 +79,7 @@ config LIS3L02DQ
depends on SPI
select IIO_TRIGGER if IIO_BUFFER
depends on !IIO_BUFFER || IIO_KFIFO_BUF
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say Y here to build SPI support for the ST microelectronics
accelerometer. The driver supplies direct access via sysfs files
diff --git a/drivers/staging/iio/accel/sca3000_ring.c b/drivers/staging/iio/accel/sca3000_ring.c
index 8589eade1..23685e749 100644
--- a/drivers/staging/iio/accel/sca3000_ring.c
+++ b/drivers/staging/iio/accel/sca3000_ring.c
@@ -258,6 +258,8 @@ static const struct iio_buffer_access_funcs sca3000_ring_access_funcs = {
.read_first_n = &sca3000_read_first_n_hw_rb,
.data_available = sca3000_ring_buf_data_available,
.release = sca3000_ring_release,
+
+ .modes = INDIO_BUFFER_HARDWARE,
};
int sca3000_configure_ring(struct iio_dev *indio_dev)
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index d0016ce6e..94ae4232e 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -5,7 +5,7 @@ menu "Analog to digital converters"
config AD7606
tristate "Analog Devices AD7606 ADC driver"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
@@ -39,7 +39,7 @@ config AD7606_IFACE_SPI
config AD7780
tristate "Analog Devices AD7780 and similar ADCs driver"
depends on SPI
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
select AD_SIGMA_DELTA
help
Say yes here to build support for Analog Devices AD7170, AD7171,
@@ -52,7 +52,7 @@ config AD7780
config AD7816
tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver"
depends on SPI
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say yes here to build support for Analog Devices AD7816/7/8
temperature sensors and ADC.
diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c
index 9e24b4d44..1d48ae381 100644
--- a/drivers/staging/iio/adc/ad7606_par.c
+++ b/drivers/staging/iio/adc/ad7606_par.c
@@ -119,7 +119,7 @@ static const struct dev_pm_ops ad7606_pm_ops = {
#define AD7606_PAR_PM_OPS NULL
#endif /* CONFIG_PM */
-static struct platform_device_id ad7606_driver_ids[] = {
+static const struct platform_device_id ad7606_driver_ids[] = {
{
.name = "ad7606-8",
.driver_data = ID_AD7606_8,
diff --git a/drivers/staging/iio/addac/Kconfig b/drivers/staging/iio/addac/Kconfig
index 0ed7e13e2..ba18b8432 100644
--- a/drivers/staging/iio/addac/Kconfig
+++ b/drivers/staging/iio/addac/Kconfig
@@ -5,7 +5,7 @@ menu "Analog digital bi-direction converters"
config ADT7316
tristate "Analog Devices ADT7316/7/8 ADT7516/7/9 temperature sensor, ADC and DAC driver"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say yes here to build support for Analog Devices ADT7316, ADT7317, ADT7318
and ADT7516, ADT7517, ADT7519 temperature sensors, ADC and DAC.
diff --git a/drivers/staging/iio/iio_dummy_evgen.c b/drivers/staging/iio/iio_dummy_evgen.c
index 0c9c86d7b..c54d5b544 100644
--- a/drivers/staging/iio/iio_dummy_evgen.c
+++ b/drivers/staging/iio/iio_dummy_evgen.c
@@ -128,13 +128,11 @@ EXPORT_SYMBOL_GPL(iio_dummy_evgen_get_irq);
*
* Used by client driver instances to give the irqs back when they disconnect
*/
-int iio_dummy_evgen_release_irq(int irq)
+void iio_dummy_evgen_release_irq(int irq)
{
mutex_lock(&iio_evgen->lock);
iio_evgen->inuse[irq - iio_evgen->base] = false;
mutex_unlock(&iio_evgen->lock);
-
- return 0;
}
EXPORT_SYMBOL_GPL(iio_dummy_evgen_release_irq);
diff --git a/drivers/staging/iio/iio_dummy_evgen.h b/drivers/staging/iio/iio_dummy_evgen.h
index 2ac293ab7..d044b946e 100644
--- a/drivers/staging/iio/iio_dummy_evgen.h
+++ b/drivers/staging/iio/iio_dummy_evgen.h
@@ -8,6 +8,6 @@ struct iio_dummy_regs {
struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq);
int iio_dummy_evgen_get_irq(void);
-int iio_dummy_evgen_release_irq(int irq);
+void iio_dummy_evgen_release_irq(int irq);
#endif /* _IIO_DUMMY_EVGEN_H_ */
diff --git a/drivers/staging/iio/iio_simple_dummy.c b/drivers/staging/iio/iio_simple_dummy.c
index b47bf9fb6..1629a8a6b 100644
--- a/drivers/staging/iio/iio_simple_dummy.c
+++ b/drivers/staging/iio/iio_simple_dummy.c
@@ -30,7 +30,7 @@
* dummy devices are registered.
*/
static unsigned instances = 1;
-module_param(instances, int, 0);
+module_param(instances, uint, 0);
/* Pointer array used to fake bus elements */
static struct iio_dev **iio_dummy_devs;
@@ -665,9 +665,8 @@ error_ret:
*
* Parameters follow those of iio_dummy_probe for buses.
*/
-static int iio_dummy_remove(int index)
+static void iio_dummy_remove(int index)
{
- int ret;
/*
* Get a pointer to the device instance iio_dev structure
* from the bus subsystem. E.g.
@@ -685,15 +684,10 @@ static int iio_dummy_remove(int index)
/* Buffered capture related cleanup */
iio_simple_dummy_unconfigure_buffer(indio_dev);
- ret = iio_simple_dummy_events_unregister(indio_dev);
- if (ret)
- goto error_ret;
+ iio_simple_dummy_events_unregister(indio_dev);
/* Free all structures */
iio_device_free(indio_dev);
-
-error_ret:
- return ret;
}
/**
@@ -722,9 +716,16 @@ static __init int iio_dummy_init(void)
for (i = 0; i < instances; i++) {
ret = iio_dummy_probe(i);
if (ret < 0)
- return ret;
+ goto error_remove_devs;
}
return 0;
+
+error_remove_devs:
+ while (i--)
+ iio_dummy_remove(i);
+
+ kfree(iio_dummy_devs);
+ return ret;
}
module_init(iio_dummy_init);
diff --git a/drivers/staging/iio/iio_simple_dummy.h b/drivers/staging/iio/iio_simple_dummy.h
index 34989bf24..e877a9954 100644
--- a/drivers/staging/iio/iio_simple_dummy.h
+++ b/drivers/staging/iio/iio_simple_dummy.h
@@ -25,7 +25,7 @@ struct iio_dummy_regs;
* @accel_calibscale: cache for acceleration calibscale
* @lock: lock to ensure state is consistent
* @event_irq: irq number for event line (faked)
- * @event_val: cache for event theshold value
+ * @event_val: cache for event threshold value
* @event_en: cache of whether event is enabled
*/
struct iio_dummy_state {
@@ -79,7 +79,7 @@ int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
int val2);
int iio_simple_dummy_events_register(struct iio_dev *indio_dev);
-int iio_simple_dummy_events_unregister(struct iio_dev *indio_dev);
+void iio_simple_dummy_events_unregister(struct iio_dev *indio_dev);
#else /* Stubs for when events are disabled at compile time */
@@ -89,11 +89,9 @@ iio_simple_dummy_events_register(struct iio_dev *indio_dev)
return 0;
};
-static inline int
+static inline void
iio_simple_dummy_events_unregister(struct iio_dev *indio_dev)
-{
- return 0;
-};
+{ };
#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS*/
diff --git a/drivers/staging/iio/iio_simple_dummy_events.c b/drivers/staging/iio/iio_simple_dummy_events.c
index a5cd3bb21..ecc563cb6 100644
--- a/drivers/staging/iio/iio_simple_dummy_events.c
+++ b/drivers/staging/iio/iio_simple_dummy_events.c
@@ -84,6 +84,7 @@ int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
default:
return -EINVAL;
}
+ break;
case IIO_STEPS:
switch (type) {
case IIO_EV_TYPE_CHANGE:
@@ -92,6 +93,7 @@ int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
default:
return -EINVAL;
}
+ break;
default:
return -EINVAL;
}
@@ -255,13 +257,11 @@ error_ret:
* iio_simple_dummy_events_unregister() - tidy up interrupt handling on remove
* @indio_dev: device instance data
*/
-int iio_simple_dummy_events_unregister(struct iio_dev *indio_dev)
+void iio_simple_dummy_events_unregister(struct iio_dev *indio_dev)
{
struct iio_dummy_state *st = iio_priv(indio_dev);
free_irq(st->event_irq, indio_dev);
/* Not part of normal driver */
iio_dummy_evgen_release_irq(st->event_irq);
-
- return 0;
}
diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c
index a3489187a..e646c5d24 100644
--- a/drivers/staging/iio/light/isl29018.c
+++ b/drivers/staging/iio/light/isl29018.c
@@ -66,58 +66,115 @@
#define ISL29035_BOUT_SHIFT 0x07
#define ISL29035_BOUT_MASK (0x01 << ISL29035_BOUT_SHIFT)
+#define ISL29018_INT_TIME_AVAIL "0.090000 0.005630 0.000351 0.000021"
+#define ISL29023_INT_TIME_AVAIL "0.090000 0.005600 0.000352 0.000022"
+#define ISL29035_INT_TIME_AVAIL "0.105000 0.006500 0.000410 0.000025"
+
+static const char * const int_time_avail[] = {
+ ISL29018_INT_TIME_AVAIL,
+ ISL29023_INT_TIME_AVAIL,
+ ISL29035_INT_TIME_AVAIL,
+};
+
+enum isl29018_int_time {
+ ISL29018_INT_TIME_16,
+ ISL29018_INT_TIME_12,
+ ISL29018_INT_TIME_8,
+ ISL29018_INT_TIME_4,
+};
+
+static const unsigned int isl29018_int_utimes[3][4] = {
+ {90000, 5630, 351, 21},
+ {90000, 5600, 352, 22},
+ {105000, 6500, 410, 25},
+};
+
+static const struct isl29018_scale {
+ unsigned int scale;
+ unsigned int uscale;
+} isl29018_scales[4][4] = {
+ { {0, 15258}, {0, 61035}, {0, 244140}, {0, 976562} },
+ { {0, 244140}, {0, 976562}, {3, 906250}, {15, 625000} },
+ { {3, 906250}, {15, 625000}, {62, 500000}, {250, 0} },
+ { {62, 500000}, {250, 0}, {1000, 0}, {4000, 0} }
+};
+
struct isl29018_chip {
struct device *dev;
struct regmap *regmap;
struct mutex lock;
int type;
- unsigned int lux_scale;
- unsigned int lux_uscale;
- unsigned int range;
- unsigned int adc_bit;
+ unsigned int calibscale;
+ unsigned int ucalibscale;
+ unsigned int int_time;
+ struct isl29018_scale scale;
int prox_scheme;
bool suspended;
};
-static int isl29018_set_range(struct isl29018_chip *chip, unsigned long range,
- unsigned int *new_range)
+static int isl29018_set_integration_time(struct isl29018_chip *chip,
+ unsigned int utime)
{
- static const unsigned long supp_ranges[] = {1000, 4000, 16000, 64000};
- int i;
-
- for (i = 0; i < ARRAY_SIZE(supp_ranges); ++i) {
- if (range <= supp_ranges[i]) {
- *new_range = (unsigned int)supp_ranges[i];
+ int i, ret;
+ unsigned int int_time, new_int_time;
+ struct isl29018_scale new_scale;
+
+ for (i = 0; i < ARRAY_SIZE(isl29018_int_utimes[chip->type]); ++i) {
+ if (utime == isl29018_int_utimes[chip->type][i]) {
+ new_int_time = i;
+ new_scale = isl29018_scales[new_int_time][0];
break;
}
}
- if (i >= ARRAY_SIZE(supp_ranges))
+ if (i >= ARRAY_SIZE(isl29018_int_utimes[chip->type]))
return -EINVAL;
- return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
- COMMANDII_RANGE_MASK, i << COMMANDII_RANGE_SHIFT);
+ ret = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+ COMMANDII_RESOLUTION_MASK,
+ i << COMMANDII_RESOLUTION_SHIFT);
+ if (ret < 0)
+ return ret;
+
+ /* keep the same range when integration time changes */
+ int_time = chip->int_time;
+ for (i = 0; i < ARRAY_SIZE(isl29018_scales[int_time]); ++i) {
+ if (chip->scale.scale == isl29018_scales[int_time][i].scale &&
+ chip->scale.uscale == isl29018_scales[int_time][i].uscale) {
+ chip->scale = isl29018_scales[new_int_time][i];
+ break;
+ }
+ }
+ chip->int_time = new_int_time;
+
+ return 0;
}
-static int isl29018_set_resolution(struct isl29018_chip *chip,
- unsigned long adcbit, unsigned int *conf_adc_bit)
+static int isl29018_set_scale(struct isl29018_chip *chip, int scale, int uscale)
{
- static const unsigned long supp_adcbit[] = {16, 12, 8, 4};
- int i;
+ int i, ret;
+ struct isl29018_scale new_scale;
- for (i = 0; i < ARRAY_SIZE(supp_adcbit); ++i) {
- if (adcbit >= supp_adcbit[i]) {
- *conf_adc_bit = (unsigned int)supp_adcbit[i];
+ for (i = 0; i < ARRAY_SIZE(isl29018_scales[chip->int_time]); ++i) {
+ if (scale == isl29018_scales[chip->int_time][i].scale &&
+ uscale == isl29018_scales[chip->int_time][i].uscale) {
+ new_scale = isl29018_scales[chip->int_time][i];
break;
}
}
- if (i >= ARRAY_SIZE(supp_adcbit))
+ if (i >= ARRAY_SIZE(isl29018_scales[chip->int_time]))
return -EINVAL;
- return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
- COMMANDII_RESOLUTION_MASK,
- i << COMMANDII_RESOLUTION_SHIFT);
+ ret = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+ COMMANDII_RANGE_MASK,
+ i << COMMANDII_RANGE_SHIFT);
+ if (ret < 0)
+ return ret;
+
+ chip->scale = new_scale;
+
+ return 0;
}
static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode)
@@ -156,22 +213,17 @@ static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode)
static int isl29018_read_lux(struct isl29018_chip *chip, int *lux)
{
int lux_data;
- unsigned int data_x_range, lux_unshifted;
+ unsigned int data_x_range;
lux_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_ALS_ONCE);
if (lux_data < 0)
return lux_data;
- /* To support fractional scaling, separate the unshifted lux
- * into two calculations: int scaling and micro-scaling.
- * lux_uscale ranges from 0-999999, so about 20 bits. Split
- * the /1,000,000 in two to reduce the risk of over/underflow.
- */
- data_x_range = lux_data * chip->range;
- lux_unshifted = data_x_range * chip->lux_scale;
- lux_unshifted += data_x_range / 1000 * chip->lux_uscale / 1000;
- *lux = lux_unshifted >> chip->adc_bit;
+ data_x_range = lux_data * chip->scale.scale +
+ lux_data * chip->scale.uscale / 1000000;
+ *lux = data_x_range * chip->calibscale +
+ data_x_range * chip->ucalibscale / 1000000;
return 0;
}
@@ -229,86 +281,37 @@ static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme,
return 0;
}
-/* Sysfs interface */
-/* range */
-static ssize_t show_range(struct device *dev,
+static ssize_t show_scale_available(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct isl29018_chip *chip = iio_priv(indio_dev);
+ int i, len = 0;
- return sprintf(buf, "%u\n", chip->range);
-}
-
-static ssize_t store_range(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct isl29018_chip *chip = iio_priv(indio_dev);
- int status;
- unsigned long lval;
- unsigned int new_range;
-
- if (kstrtoul(buf, 10, &lval))
- return -EINVAL;
-
- if (!(lval == 1000UL || lval == 4000UL ||
- lval == 16000UL || lval == 64000UL)) {
- dev_err(dev, "The range is not supported\n");
- return -EINVAL;
- }
+ for (i = 0; i < ARRAY_SIZE(isl29018_scales[chip->int_time]); ++i)
+ len += sprintf(buf + len, "%d.%06d ",
+ isl29018_scales[chip->int_time][i].scale,
+ isl29018_scales[chip->int_time][i].uscale);
- mutex_lock(&chip->lock);
- status = isl29018_set_range(chip, lval, &new_range);
- if (status < 0) {
- mutex_unlock(&chip->lock);
- dev_err(dev,
- "Error in setting max range with err %d\n", status);
- return status;
- }
- chip->range = new_range;
- mutex_unlock(&chip->lock);
+ buf[len - 1] = '\n';
- return count;
+ return len;
}
-/* resolution */
-static ssize_t show_resolution(struct device *dev,
+static ssize_t show_int_time_available(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct isl29018_chip *chip = iio_priv(indio_dev);
+ int i, len = 0;
- return sprintf(buf, "%u\n", chip->adc_bit);
-}
+ for (i = 0; i < ARRAY_SIZE(isl29018_int_utimes[chip->type]); ++i)
+ len += sprintf(buf + len, "0.%06d ",
+ isl29018_int_utimes[chip->type][i]);
-static ssize_t store_resolution(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct isl29018_chip *chip = iio_priv(indio_dev);
- int status;
- unsigned int val;
- unsigned int new_adc_bit;
-
- if (kstrtouint(buf, 10, &val))
- return -EINVAL;
- if (!(val == 4 || val == 8 || val == 12 || val == 16)) {
- dev_err(dev, "The resolution is not supported\n");
- return -EINVAL;
- }
-
- mutex_lock(&chip->lock);
- status = isl29018_set_resolution(chip, val, &new_adc_bit);
- if (status < 0) {
- mutex_unlock(&chip->lock);
- dev_err(dev, "Error in setting resolution\n");
- return status;
- }
- chip->adc_bit = new_adc_bit;
- mutex_unlock(&chip->lock);
+ buf[len - 1] = '\n';
- return count;
+ return len;
}
/* proximity scheme */
@@ -357,11 +360,29 @@ static int isl29018_write_raw(struct iio_dev *indio_dev,
int ret = -EINVAL;
mutex_lock(&chip->lock);
- if (mask == IIO_CHAN_INFO_CALIBSCALE && chan->type == IIO_LIGHT) {
- chip->lux_scale = val;
- /* With no write_raw_get_fmt(), val2 is a MICRO fraction. */
- chip->lux_uscale = val2;
- ret = 0;
+ switch (mask) {
+ case IIO_CHAN_INFO_CALIBSCALE:
+ if (chan->type == IIO_LIGHT) {
+ chip->calibscale = val;
+ chip->ucalibscale = val2;
+ ret = 0;
+ }
+ break;
+ case IIO_CHAN_INFO_INT_TIME:
+ if (chan->type == IIO_LIGHT) {
+ if (val != 0) {
+ mutex_unlock(&chip->lock);
+ return -EINVAL;
+ }
+ ret = isl29018_set_integration_time(chip, val2);
+ }
+ break;
+ case IIO_CHAN_INFO_SCALE:
+ if (chan->type == IIO_LIGHT)
+ ret = isl29018_set_scale(chip, val, val2);
+ break;
+ default:
+ break;
}
mutex_unlock(&chip->lock);
@@ -402,10 +423,24 @@ static int isl29018_read_raw(struct iio_dev *indio_dev,
if (!ret)
ret = IIO_VAL_INT;
break;
+ case IIO_CHAN_INFO_INT_TIME:
+ if (chan->type == IIO_LIGHT) {
+ *val = 0;
+ *val2 = isl29018_int_utimes[chip->type][chip->int_time];
+ ret = IIO_VAL_INT_PLUS_MICRO;
+ }
+ break;
+ case IIO_CHAN_INFO_SCALE:
+ if (chan->type == IIO_LIGHT) {
+ *val = chip->scale.scale;
+ *val2 = chip->scale.uscale;
+ ret = IIO_VAL_INT_PLUS_MICRO;
+ }
+ break;
case IIO_CHAN_INFO_CALIBSCALE:
if (chan->type == IIO_LIGHT) {
- *val = chip->lux_scale;
- *val2 = chip->lux_uscale;
+ *val = chip->calibscale;
+ *val2 = chip->ucalibscale;
ret = IIO_VAL_INT_PLUS_MICRO;
}
break;
@@ -421,7 +456,9 @@ static int isl29018_read_raw(struct iio_dev *indio_dev,
.indexed = 1, \
.channel = 0, \
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | \
- BIT(IIO_CHAN_INFO_CALIBSCALE), \
+ BIT(IIO_CHAN_INFO_CALIBSCALE) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_INT_TIME), \
}
#define ISL29018_IR_CHANNEL { \
@@ -447,32 +484,27 @@ static const struct iio_chan_spec isl29023_channels[] = {
ISL29018_IR_CHANNEL,
};
-static IIO_DEVICE_ATTR(range, S_IRUGO | S_IWUSR, show_range, store_range, 0);
-static IIO_CONST_ATTR(range_available, "1000 4000 16000 64000");
-static IIO_CONST_ATTR(adc_resolution_available, "4 8 12 16");
-static IIO_DEVICE_ATTR(adc_resolution, S_IRUGO | S_IWUSR,
- show_resolution, store_resolution, 0);
+static IIO_DEVICE_ATTR(in_illuminance_integration_time_available, S_IRUGO,
+ show_int_time_available, NULL, 0);
+static IIO_DEVICE_ATTR(in_illuminance_scale_available, S_IRUGO,
+ show_scale_available, NULL, 0);
static IIO_DEVICE_ATTR(proximity_on_chip_ambient_infrared_suppression,
S_IRUGO | S_IWUSR,
show_prox_infrared_suppression,
store_prox_infrared_suppression, 0);
#define ISL29018_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
-#define ISL29018_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
+
static struct attribute *isl29018_attributes[] = {
- ISL29018_DEV_ATTR(range),
- ISL29018_CONST_ATTR(range_available),
- ISL29018_DEV_ATTR(adc_resolution),
- ISL29018_CONST_ATTR(adc_resolution_available),
+ ISL29018_DEV_ATTR(in_illuminance_scale_available),
+ ISL29018_DEV_ATTR(in_illuminance_integration_time_available),
ISL29018_DEV_ATTR(proximity_on_chip_ambient_infrared_suppression),
NULL
};
static struct attribute *isl29023_attributes[] = {
- ISL29018_DEV_ATTR(range),
- ISL29018_CONST_ATTR(range_available),
- ISL29018_DEV_ATTR(adc_resolution),
- ISL29018_CONST_ATTR(adc_resolution_available),
+ ISL29018_DEV_ATTR(in_illuminance_scale_available),
+ ISL29018_DEV_ATTR(in_illuminance_integration_time_available),
NULL
};
@@ -516,8 +548,6 @@ enum {
static int isl29018_chip_init(struct isl29018_chip *chip)
{
int status;
- unsigned int new_adc_bit;
- unsigned int new_range;
if (chip->type == isl29035) {
status = isl29035_detect(chip);
@@ -566,14 +596,19 @@ static int isl29018_chip_init(struct isl29018_chip *chip)
usleep_range(1000, 2000); /* per data sheet, page 10 */
/* set defaults */
- status = isl29018_set_range(chip, chip->range, &new_range);
+ status = isl29018_set_scale(chip, chip->scale.scale,
+ chip->scale.uscale);
if (status < 0) {
dev_err(chip->dev, "Init of isl29018 fails\n");
return status;
}
- status = isl29018_set_resolution(chip, chip->adc_bit,
- &new_adc_bit);
+ status = isl29018_set_integration_time(chip,
+ isl29018_int_utimes[chip->type][chip->int_time]);
+ if (status < 0) {
+ dev_err(chip->dev, "Init of isl29018 fails\n");
+ return status;
+ }
return 0;
}
@@ -701,10 +736,10 @@ static int isl29018_probe(struct i2c_client *client,
mutex_init(&chip->lock);
chip->type = dev_id;
- chip->lux_scale = 1;
- chip->lux_uscale = 0;
- chip->range = 1000;
- chip->adc_bit = 16;
+ chip->calibscale = 1;
+ chip->ucalibscale = 0;
+ chip->int_time = ISL29018_INT_TIME_16;
+ chip->scale = isl29018_scales[chip->int_time][0];
chip->suspended = false;
chip->regmap = devm_regmap_init_i2c(client,
diff --git a/drivers/staging/iio/resolver/Kconfig b/drivers/staging/iio/resolver/Kconfig
index c7a742ec1..1c7e2860d 100644
--- a/drivers/staging/iio/resolver/Kconfig
+++ b/drivers/staging/iio/resolver/Kconfig
@@ -16,7 +16,7 @@ config AD2S90
config AD2S1200
tristate "Analog Devices ad2s1200/ad2s1205 driver"
depends on SPI
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say yes here to build support for Analog Devices spi resolver
to digital converters, ad2s1200 and ad2s1205, provides direct access
@@ -28,7 +28,7 @@ config AD2S1200
config AD2S1210
tristate "Analog Devices ad2s1210 driver"
depends on SPI
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say yes here to build support for Analog Devices spi resolver
to digital converters, ad2s1210, provides direct access via sysfs.
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-28 10:15:52 +0000