diff options
Diffstat (limited to 'drivers/staging/media/lirc/TODO.lirc_zilog')
-rw-r--r-- | drivers/staging/media/lirc/TODO.lirc_zilog | 36 |
1 files changed, 36 insertions, 0 deletions
diff --git a/drivers/staging/media/lirc/TODO.lirc_zilog b/drivers/staging/media/lirc/TODO.lirc_zilog new file mode 100644 index 000000000..a97800a8e --- /dev/null +++ b/drivers/staging/media/lirc/TODO.lirc_zilog @@ -0,0 +1,36 @@ +1. Both ir-kbd-i2c and lirc_zilog provide support for RX events for +the chips supported by lirc_zilog. Before moving lirc_zilog out of staging: + +a. ir-kbd-i2c needs a module parameter added to allow the user to tell + ir-kbd-i2c to ignore Z8 IR units. + +b. lirc_zilog should provide Rx key presses to the rc core like ir-kbd-i2c + does. + + +2. lirc_zilog module ref-counting need examination. It has not been +verified that cdev and lirc_dev will take the proper module references on +lirc_zilog to prevent removal of lirc_zilog when the /dev/lircN device node +is open. + +(The good news is ref-counting of lirc_zilog internal structures appears to be +complete. Testing has shown the cx18 module can be unloaded out from under +irw + lircd + lirc_dev, with the /dev/lirc0 device node open, with no adverse +effects. The cx18 module could then be reloaded and irw properly began +receiving button presses again and ir_send worked without error.) + + +3. Bridge drivers, if able, should provide a chip reset() callback +to lirc_zilog via struct IR_i2c_init_data. cx18 and ivtv already have routines +to perform Z8 chip resets via GPIO manipulations. This would allow lirc_zilog +to bring the chip back to normal when it hangs, in the same places the +original lirc_pvr150 driver code does. This is not strictly needed, so it +is not required to move lirc_zilog out of staging. + +Note: Both lirc_zilog and ir-kbd-i2c support the Zilog Z8 for IR, as programmed +and installed on Hauppauge products. When working on either module, developers +must consider at least the following bridge drivers which mention an IR Rx unit +at address 0x71 (indicative of a Z8): + + ivtv cx18 hdpvr pvrusb2 bt8xx cx88 saa7134 + |