diff options
Diffstat (limited to 'drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h')
-rw-r--r-- | drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h | 238 |
1 files changed, 238 insertions, 0 deletions
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h b/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h new file mode 100644 index 000000000..20e6b40fc --- /dev/null +++ b/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h @@ -0,0 +1,238 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +#ifndef __INC_HAL8188EPHYCFG_H__ +#define __INC_HAL8188EPHYCFG_H__ + + +/*--------------------------Define Parameters-------------------------------*/ +#define LOOP_LIMIT 5 +#define MAX_STALL_TIME 50 /* us */ +#define AntennaDiversityValue 0x80 +#define MAX_TXPWR_IDX_NMODE_92S 63 +#define Reset_Cnt_Limit 3 + +#define IQK_MAC_REG_NUM 4 +#define IQK_ADDA_REG_NUM 16 +#define IQK_BB_REG_NUM 9 +#define HP_THERMAL_NUM 8 + +#define MAX_AGGR_NUM 0x07 + + +/*--------------------------Define Parameters-------------------------------*/ + + +/*------------------------------Define structure----------------------------*/ +enum sw_chnl_cmd_id { + CmdID_End, + CmdID_SetTxPowerLevel, + CmdID_BBRegWrite10, + CmdID_WritePortUlong, + CmdID_WritePortUshort, + CmdID_WritePortUchar, + CmdID_RF_WriteReg, +}; + +/* 1. Switch channel related */ +struct sw_chnl_cmd { + enum sw_chnl_cmd_id CmdID; + u32 Para1; + u32 Para2; + u32 msDelay; +}; + +enum hw90_block { + HW90_BLOCK_MAC = 0, + HW90_BLOCK_PHY0 = 1, + HW90_BLOCK_PHY1 = 2, + HW90_BLOCK_RF = 3, + HW90_BLOCK_MAXIMUM = 4, /* Never use this */ +}; + +enum rf_radio_path { + RF_PATH_A = 0, /* Radio Path A */ + RF_PATH_B = 1, /* Radio Path B */ + RF_PATH_C = 2, /* Radio Path C */ + RF_PATH_D = 3, /* Radio Path D */ +}; + +#define MAX_PG_GROUP 13 + +#define RF_PATH_MAX 3 +#define MAX_RF_PATH RF_PATH_MAX +#define MAX_TX_COUNT 4 /* path numbers */ + +#define CHANNEL_MAX_NUMBER 14 /* 14 is the max chnl number */ +#define MAX_CHNL_GROUP_24G 6 /* ch1~2, ch3~5, ch6~8, + *ch9~11, ch12~13, CH 14 + * total three groups */ +#define CHANNEL_GROUP_MAX_88E 6 + +enum wireless_mode { + WIRELESS_MODE_UNKNOWN = 0x00, + WIRELESS_MODE_A = BIT2, + WIRELESS_MODE_B = BIT0, + WIRELESS_MODE_G = BIT1, + WIRELESS_MODE_AUTO = BIT5, + WIRELESS_MODE_N_24G = BIT3, + WIRELESS_MODE_N_5G = BIT4, + WIRELESS_MODE_AC = BIT6 +}; + +enum phy_rate_tx_offset_area { + RA_OFFSET_LEGACY_OFDM1, + RA_OFFSET_LEGACY_OFDM2, + RA_OFFSET_HT_OFDM1, + RA_OFFSET_HT_OFDM2, + RA_OFFSET_HT_OFDM3, + RA_OFFSET_HT_OFDM4, + RA_OFFSET_HT_CCK, +}; + +/* BB/RF related */ +enum RF_TYPE_8190P { + RF_TYPE_MIN, /* 0 */ + RF_8225 = 1, /* 1 11b/g RF for verification only */ + RF_8256 = 2, /* 2 11b/g/n */ + RF_8258 = 3, /* 3 11a/b/g/n RF */ + RF_6052 = 4, /* 4 11b/g/n RF */ + /* TODO: We should remove this psudo PHY RF after we get new RF. */ + RF_PSEUDO_11N = 5, /* 5, It is a temporality RF. */ +}; + +struct bb_reg_def { + u32 rfintfs; /* set software control: */ + /* 0x870~0x877[8 bytes] */ + u32 rfintfi; /* readback data: */ + /* 0x8e0~0x8e7[8 bytes] */ + u32 rfintfo; /* output data: */ + /* 0x860~0x86f [16 bytes] */ + u32 rfintfe; /* output enable: */ + /* 0x860~0x86f [16 bytes] */ + u32 rf3wireOffset; /* LSSI data: */ + /* 0x840~0x84f [16 bytes] */ + u32 rfLSSI_Select; /* BB Band Select: */ + /* 0x878~0x87f [8 bytes] */ + u32 rfTxGainStage; /* Tx gain stage: */ + /* 0x80c~0x80f [4 bytes] */ + u32 rfHSSIPara1; /* wire parameter control1 : */ + /* 0x820~0x823,0x828~0x82b, + * 0x830~0x833, 0x838~0x83b [16 bytes] */ + u32 rfHSSIPara2; /* wire parameter control2 : */ + /* 0x824~0x827,0x82c~0x82f, 0x834~0x837, + * 0x83c~0x83f [16 bytes] */ + u32 rfSwitchControl; /* Tx Rx antenna control : */ + /* 0x858~0x85f [16 bytes] */ + u32 rfAGCControl1; /* AGC parameter control1 : */ + /* 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, + * 0xc68~0xc6b [16 bytes] */ + u32 rfAGCControl2; /* AGC parameter control2 : */ + /* 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, + * 0xc6c~0xc6f [16 bytes] */ + u32 rfRxIQImbalance; /* OFDM Rx IQ imbalance matrix : */ + /* 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, + * 0xc2c~0xc2f [16 bytes] */ + u32 rfRxAFE; /* Rx IQ DC ofset and Rx digital filter, + * Rx DC notch filter : */ + /* 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, + * 0xc28~0xc2b [16 bytes] */ + u32 rfTxIQImbalance; /* OFDM Tx IQ imbalance matrix */ + /* 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, + * 0xc98~0xc9b [16 bytes] */ + u32 rfTxAFE; /* Tx IQ DC Offset and Tx DFIR type */ + /* 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, + * 0xc9c~0xc9f [16 bytes] */ + u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */ + /* 0x8a0~0x8af [16 bytes] */ + u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for + * Path A and B */ +}; + +struct ant_sel_ofdm { + u32 r_tx_antenna:4; + u32 r_ant_l:4; + u32 r_ant_non_ht:4; + u32 r_ant_ht1:4; + u32 r_ant_ht2:4; + u32 r_ant_ht_s1:4; + u32 r_ant_non_ht_s1:4; + u32 OFDM_TXSC:2; + u32 reserved:2; +}; + +struct ant_sel_cck { + u8 r_cckrx_enable_2:2; + u8 r_cckrx_enable:2; + u8 r_ccktx_enable:4; +}; + +/*------------------------------Define structure----------------------------*/ + + +/*------------------------Export global variable----------------------------*/ +/*------------------------Export global variable----------------------------*/ + + +/*------------------------Export Marco Definition---------------------------*/ +/*------------------------Export Marco Definition---------------------------*/ + + +/*--------------------------Exported Function prototype---------------------*/ +/* */ +/* BB and RF register read/write */ +/* */ + +/* Read initi reg value for tx power setting. */ +void rtl8192c_PHY_GetHWRegOriginalValue(struct adapter *adapter); + +/* BB TX Power R/W */ +void PHY_GetTxPowerLevel8188E(struct adapter *adapter, u32 *powerlevel); + +void PHY_ScanOperationBackup8188E(struct adapter *Adapter, u8 Operation); + +/* Call after initialization */ +void ChkFwCmdIoDone(struct adapter *adapter); + +/* BB/MAC/RF other monitor API */ +void PHY_SetRFPathSwitch_8188E(struct adapter *adapter, bool main); + +void PHY_SwitchEphyParameter(struct adapter *adapter); + +void PHY_EnableHostClkReq(struct adapter *adapter); + +bool SetAntennaConfig92C(struct adapter *adapter, u8 defaultant); + +/*--------------------------Exported Function prototype---------------------*/ + +#define PHY_SetMacReg PHY_SetBBReg + +#define SIC_HW_SUPPORT 0 + +#define SIC_MAX_POLL_CNT 5 + +#define SIC_CMD_READY 0 +#define SIC_CMD_WRITE 1 +#define SIC_CMD_READ 2 + +#define SIC_CMD_REG 0x1EB /* 1byte */ +#define SIC_ADDR_REG 0x1E8 /* 1b9~1ba, 2 bytes */ +#define SIC_DATA_REG 0x1EC /* 1bc~1bf */ + +#endif /* __INC_HAL8192CPHYCFG_H */ |