diff options
Diffstat (limited to 'drivers/staging/rtl8188eu/include/rtl8188e_hal.h')
-rw-r--r-- | drivers/staging/rtl8188eu/include/rtl8188e_hal.h | 428 |
1 files changed, 428 insertions, 0 deletions
diff --git a/drivers/staging/rtl8188eu/include/rtl8188e_hal.h b/drivers/staging/rtl8188eu/include/rtl8188e_hal.h new file mode 100644 index 000000000..7b3c464e7 --- /dev/null +++ b/drivers/staging/rtl8188eu/include/rtl8188e_hal.h @@ -0,0 +1,428 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +#ifndef __RTL8188E_HAL_H__ +#define __RTL8188E_HAL_H__ + + +/* include HAL Related header after HAL Related compiling flags */ +#include "rtl8188e_spec.h" +#include "Hal8188EPhyReg.h" +#include "Hal8188EPhyCfg.h" +#include "rtl8188e_dm.h" +#include "rtl8188e_recv.h" +#include "rtl8188e_xmit.h" +#include "rtl8188e_cmd.h" +#include "pwrseq.h" +#include "rtw_efuse.h" +#include "rtw_sreset.h" +#include "odm_precomp.h" + +/* Fw Array */ +#define Rtl8188E_FwImageArray Rtl8188EFwImgArray +#define Rtl8188E_FWImgArrayLength Rtl8188EFWImgArrayLength + +#define RTL8188E_FW_UMC_IMG "/*(DEBLOBBED)*/" +#define RTL8188E_PHY_REG "rtl8188E\\PHY_REG_1T.txt" +#define RTL8188E_PHY_RADIO_A "rtl8188E\\radio_a_1T.txt" +#define RTL8188E_PHY_RADIO_B "rtl8188E\\radio_b_1T.txt" +#define RTL8188E_AGC_TAB "rtl8188E\\AGC_TAB_1T.txt" +#define RTL8188E_PHY_MACREG "rtl8188E\\MAC_REG.txt" +#define RTL8188E_PHY_REG_PG "rtl8188E\\PHY_REG_PG.txt" +#define RTL8188E_PHY_REG_MP "rtl8188E\\PHY_REG_MP.txt" + +/* RTL8188E Power Configuration CMDs for USB/SDIO interfaces */ +#define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow +#define Rtl8188E_NIC_RF_OFF_FLOW rtl8188E_radio_off_flow +#define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow +#define Rtl8188E_NIC_ENABLE_FLOW rtl8188E_card_enable_flow +#define Rtl8188E_NIC_SUSPEND_FLOW rtl8188E_suspend_flow +#define Rtl8188E_NIC_RESUME_FLOW rtl8188E_resume_flow +#define Rtl8188E_NIC_PDN_FLOW rtl8188E_hwpdn_flow +#define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow +#define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188E_leave_lps_flow + +#define DRVINFO_SZ 4 /* unit is 8bytes */ +#define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len) & 0x7F ? 1 : 0)) + +/* download firmware related data structure */ +#define FW_8188E_SIZE 0x4000 /* 16384,16k */ +#define FW_8188E_START_ADDRESS 0x1000 +#define FW_8188E_END_ADDRESS 0x1FFF /* 0x5FFF */ + +#define MAX_PAGE_SIZE 4096 /* @ page : 4k bytes */ + +#define IS_FW_HEADER_EXIST(_pFwHdr) \ + ((le16_to_cpu(_pFwHdr->signature)&0xFFF0) == 0x92C0 || \ + (le16_to_cpu(_pFwHdr->signature)&0xFFF0) == 0x88C0 || \ + (le16_to_cpu(_pFwHdr->signature)&0xFFF0) == 0x2300 || \ + (le16_to_cpu(_pFwHdr->signature)&0xFFF0) == 0x88E0) + +#define DRIVER_EARLY_INT_TIME 0x05 +#define BCN_DMA_ATIME_INT_TIME 0x02 + +enum usb_rx_agg_mode { + USB_RX_AGG_DISABLE, + USB_RX_AGG_DMA, + USB_RX_AGG_USB, + USB_RX_AGG_MIX +}; + +#define MAX_RX_DMA_BUFFER_SIZE_88E \ + 0x2400 /* 9k for 88E nornal chip , MaxRxBuff=10k-max(TxReportSize(64*8), + * WOLPattern(16*24)) */ + +#define MAX_TX_REPORT_BUFFER_SIZE 0x0400 /* 1k */ + + +/* BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON. */ +#define MAX_TX_QUEUE 9 + +#define TX_SELE_HQ BIT(0) /* High Queue */ +#define TX_SELE_LQ BIT(1) /* Low Queue */ +#define TX_SELE_NQ BIT(2) /* Normal Queue */ + +/* Note: We will divide number of page equally for each queue other + * than public queue! */ +/* 22k = 22528 bytes = 176 pages (@page = 128 bytes) */ +/* must reserved about 7 pages for LPS => 176-7 = 169 (0xA9) */ +/* 2*BCN / 1*ps-poll / 1*null-data /1*prob_rsp /1*QOS null-data /1*BT QOS + * null-data */ + +#define TX_TOTAL_PAGE_NUMBER_88E 0xA9/* 169 (21632=> 21k) */ + +#define TX_PAGE_BOUNDARY_88E (TX_TOTAL_PAGE_NUMBER_88E + 1) + +/* Note: For Normal Chip Setting ,modify later */ +#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER \ + TX_TOTAL_PAGE_NUMBER_88E /* 0xA9 , 0xb0=>176=>22k */ +#define WMM_NORMAL_TX_PAGE_BOUNDARY_88E \ + (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER + 1) /* 0xA9 */ + +/* Chip specific */ +#define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22)&0x3) +#define CHIP_BONDING_92C_1T2R 0x1 +#define CHIP_BONDING_88C_USB_MCARD 0x2 +#define CHIP_BONDING_88C_USB_HP 0x1 +#include "HalVerDef.h" +#include "hal_com.h" + +/* Channel Plan */ +enum ChannelPlan { + CHPL_FCC = 0, + CHPL_IC = 1, + CHPL_ETSI = 2, + CHPL_SPA = 3, + CHPL_FRANCE = 4, + CHPL_MKK = 5, + CHPL_MKK1 = 6, + CHPL_ISRAEL = 7, + CHPL_TELEC = 8, + CHPL_GLOBAL = 9, + CHPL_WORLD = 10, +}; + +struct txpowerinfo24g { + u8 IndexCCK_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G]; + u8 IndexBW40_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G]; + /* If only one tx, only BW20 and OFDM are used. */ + s8 CCK_Diff[MAX_RF_PATH][MAX_TX_COUNT]; + s8 OFDM_Diff[MAX_RF_PATH][MAX_TX_COUNT]; + s8 BW20_Diff[MAX_RF_PATH][MAX_TX_COUNT]; + s8 BW40_Diff[MAX_RF_PATH][MAX_TX_COUNT]; +}; + +#define EFUSE_REAL_CONTENT_LEN 512 +#define EFUSE_MAX_SECTION 16 +#define EFUSE_IC_ID_OFFSET 506 /* For some inferior IC purpose*/ +#define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN) +/* To prevent out of boundary programming case, */ +/* leave 1byte and program full section */ +/* 9bytes + 1byt + 5bytes and pre 1byte. */ +/* For worst case: */ +/* | 1byte|----8bytes----|1byte|--5bytes--| */ +/* | | Reserved(14bytes) | */ + +/* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */ +#define EFUSE_OOB_PROTECT_BYTES 15 + +#define HWSET_MAX_SIZE_88E 512 + +#define EFUSE_REAL_CONTENT_LEN_88E 256 +#define EFUSE_MAP_LEN_88E 512 +#define EFUSE_MAP_LEN EFUSE_MAP_LEN_88E +#define EFUSE_MAX_SECTION_88E 64 +#define EFUSE_MAX_WORD_UNIT_88E 4 +#define EFUSE_IC_ID_OFFSET_88E 506 +#define AVAILABLE_EFUSE_ADDR_88E(addr) \ + (addr < EFUSE_REAL_CONTENT_LEN_88E) +/* To prevent out of boundary programming case, leave 1byte and program + * full section */ +/* 9bytes + 1byt + 5bytes and pre 1byte. */ +/* For worst case: */ +/* | 2byte|----8bytes----|1byte|--7bytes--| 92D */ +/* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */ +#define EFUSE_OOB_PROTECT_BYTES_88E 18 +#define EFUSE_PROTECT_BYTES_BANK_88E 16 + +/* EFUSE for BT definition */ +#define EFUSE_BT_REAL_CONTENT_LEN 1536 /* 512*3 */ +#define EFUSE_BT_MAP_LEN 1024 /* 1k bytes */ +#define EFUSE_BT_MAX_SECTION 128 /* 1024/8 */ + +#define EFUSE_PROTECT_BYTES_BANK 16 + +/* For RTL8723 WiFi/BT/GPS multi-function configuration. */ +enum rt_multi_func { + RT_MULTI_FUNC_NONE = 0x00, + RT_MULTI_FUNC_WIFI = 0x01, + RT_MULTI_FUNC_BT = 0x02, + RT_MULTI_FUNC_GPS = 0x04, +}; + +/* For RTL8723 regulator mode. */ +enum rt_regulator_mode { + RT_SWITCHING_REGULATOR = 0, + RT_LDO_REGULATOR = 1, +}; + +struct hal_data_8188e { + struct HAL_VERSION VersionID; + enum rt_regulator_mode RegulatorMode; /* switching regulator or LDO */ + u16 CustomerID; + u8 *pfirmware; + u32 fwsize; + u16 FirmwareVersion; + u16 FirmwareVersionRev; + u16 FirmwareSubVersion; + u16 FirmwareSignature; + u8 PGMaxGroup; + /* current WIFI_PHY values */ + u32 ReceiveConfig; + enum wireless_mode CurrentWirelessMode; + enum ht_channel_width CurrentChannelBW; + u8 CurrentChannel; + u8 nCur40MhzPrimeSC;/* Control channel sub-carrier */ + + u16 BasicRateSet; + + /* rf_ctrl */ + u8 rf_chip; + u8 rf_type; + u8 NumTotalRFPath; + + u8 BoardType; + + /* EEPROM setting. */ + u16 EEPROMVID; + u16 EEPROMPID; + u16 EEPROMSVID; + u16 EEPROMSDID; + u8 EEPROMCustomerID; + u8 EEPROMSubCustomerID; + u8 EEPROMVersion; + u8 EEPROMRegulatory; + + u8 bTXPowerDataReadFromEEPORM; + u8 EEPROMThermalMeter; + u8 bAPKThermalMeterIgnore; + + bool EepromOrEfuse; + /* 92C:256bytes, 88E:512bytes, we use union set (512bytes) */ + u8 EfuseMap[2][HWSET_MAX_SIZE_512]; + u8 EfuseUsedPercentage; + struct efuse_hal EfuseHal; + + u8 Index24G_CCK_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER]; + u8 Index24G_BW40_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER]; + /* If only one tx, only BW20 and OFDM are used. */ + s8 CCK_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; + s8 OFDM_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; + s8 BW20_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; + s8 BW40_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; + + u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; + /* For HT 40MHZ pwr */ + u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; + /* For HT 40MHZ pwr */ + u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; + /* HT 20<->40 Pwr diff */ + u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; + /* For HT<->legacy pwr diff */ + u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; + /* For power group */ + u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; + u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; + + u8 LegacyHTTxPowerDiff;/* Legacy to HT rate power diff */ + /* The current Tx Power Level */ + u8 CurrentCckTxPwrIdx; + u8 CurrentOfdm24GTxPwrIdx; + u8 CurrentBW2024GTxPwrIdx; + u8 CurrentBW4024GTxPwrIdx; + + + /* Read/write are allow for following hardware information variables */ + u8 framesync; + u32 framesyncC34; + u8 framesyncMonitor; + u8 DefaultInitialGain[4]; + u8 pwrGroupCnt; + u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16]; + u32 CCKTxPowerLevelOriginalOffset; + + u8 CrystalCap; + u32 AntennaTxPath; /* Antenna path Tx */ + u32 AntennaRxPath; /* Antenna path Rx */ + u8 BluetoothCoexist; + u8 ExternalPA; + + u8 bLedOpenDrain; /* Open-drain support for controlling the LED.*/ + + u8 b1x1RecvCombine; /* for 1T1R receive combining */ + + u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */ + + struct bb_reg_def PHYRegDef[4]; /* Radio A/B/C/D */ + + u32 RfRegChnlVal[2]; + + /* RDG enable */ + bool bRDGEnable; + + /* for host message to fw */ + u8 LastHMEBoxNum; + + u8 fw_ractrl; + u8 RegTxPause; + /* Beacon function related global variable. */ + u32 RegBcnCtrlVal; + u8 RegFwHwTxQCtrl; + u8 RegReg542; + u8 RegCR_1; + + struct dm_priv dmpriv; + struct odm_dm_struct odmpriv; + struct sreset_priv srestpriv; + + u8 CurAntenna; + u8 AntDivCfg; + u8 TRxAntDivType; + + + u8 bDumpRxPkt;/* for debug */ + u8 bDumpTxPkt;/* for debug */ + u8 FwRsvdPageStartOffset; /* Reserve page start offset except + * beacon in TxQ. */ + + /* 2010/08/09 MH Add CU power down mode. */ + bool pwrdown; + + /* Add for dual MAC 0--Mac0 1--Mac1 */ + u32 interfaceIndex; + + u8 OutEpQueueSel; + u8 OutEpNumber; + + /* Add for USB aggreation mode dynamic shceme. */ + bool UsbRxHighSpeedMode; + + /* 2010/11/22 MH Add for slim combo debug mode selective. */ + /* This is used for fix the drawback of CU TSMC-A/UMC-A cut. + * HW auto suspend ability. Close BT clock. */ + bool SlimComboDbg; + + u16 EfuseUsedBytes; + + /* Auto FSM to Turn On, include clock, isolation, power control + * for MAC only */ + u8 bMacPwrCtrlOn; + + u32 UsbBulkOutSize; + + /* Interrupt relatd register information. */ + u32 IntArray[3];/* HISR0,HISR1,HSISR */ + u32 IntrMask[3]; + u8 C2hArray[16]; + u8 UsbTxAggMode; + u8 UsbTxAggDescNum; + u16 HwRxPageSize; /* Hardware setting */ + u32 MaxUsbRxAggBlock; + + enum usb_rx_agg_mode UsbRxAggMode; + u8 UsbRxAggBlockCount; /* USB Block count. Block size is + * 512-byte in high speed and 64-byte + * in full speed */ + u8 UsbRxAggBlockTimeout; + u8 UsbRxAggPageCount; /* 8192C DMA page count */ + u8 UsbRxAggPageTimeout; +}; + +#define GET_HAL_DATA(__pAdapter) \ + ((struct hal_data_8188e *)((__pAdapter)->HalData)) +#define GET_RF_TYPE(priv) (GET_HAL_DATA(priv)->rf_type) + +#define INCLUDE_MULTI_FUNC_BT(_Adapter) \ + (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT) +#define INCLUDE_MULTI_FUNC_GPS(_Adapter) \ + (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS) + +/* rtl8188e_hal_init.c */ +void _8051Reset88E(struct adapter *padapter); +void rtl8188e_InitializeFirmwareVars(struct adapter *padapter); + + +s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy); + +/* EFuse */ +void Hal_InitPGData88E(struct adapter *padapter); +void Hal_EfuseParseIDCode88E(struct adapter *padapter, u8 *hwinfo); +void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *hwinfo, + bool AutoLoadFail); + +void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo, + bool AutoLoadFail); +void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, + bool AutoLoadFail); +void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo, + bool AutoLoadFail); +void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent, + bool AutoLoadFail); +void Hal_ReadThermalMeter_88E(struct adapter *dapter, u8 *PROMContent, + bool AutoloadFail); +void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo, + bool AutoLoadFail); +void Hal_EfuseParseBoardType88E(struct adapter *pAdapter, u8 *hwinfo, + bool AutoLoadFail); +void Hal_ReadPowerSavingMode88E(struct adapter *pAdapter, u8 *hwinfo, + bool AutoLoadFail); + +void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc); + +/* register */ + +void rtl8188e_start_thread(struct adapter *padapter); +void rtl8188e_stop_thread(struct adapter *padapter); + +s32 iol_execute(struct adapter *padapter, u8 control); +void iol_mode_enable(struct adapter *padapter, u8 enable); +s32 rtl8188e_iol_efuse_patch(struct adapter *padapter); +void rtw_cancel_all_timer(struct adapter *padapter); + +#endif /* __RTL8188E_HAL_H__ */ |