summaryrefslogtreecommitdiff
path: root/drivers/thermal/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal/Kconfig')
-rw-r--r--drivers/thermal/Kconfig59
1 files changed, 24 insertions, 35 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 3c3dc4a3d..2d702ca65 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -260,16 +260,6 @@ config ARMADA_THERMAL
Enable this option if you want to have support for thermal management
controller present in Armada 370 and Armada XP SoC.
-config TEGRA_SOCTHERM
- tristate "Tegra SOCTHERM thermal management"
- depends on ARCH_TEGRA
- help
- Enable this option for integrated thermal management support on NVIDIA
- Tegra124 systems-on-chip. The driver supports four thermal zones
- (CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal
- zones to manage temperatures. This option is also required for the
- emergency thermal reset (thermtrip) feature to function.
-
config DB8500_CPUFREQ_COOLING
tristate "DB8500 cpufreq cooling"
depends on ARCH_U8500 || COMPILE_TEST
@@ -338,31 +328,9 @@ config INTEL_QUARK_DTS_THERMAL
hot & critical. The critical trip point default value is set by
underlying BIOS/Firmware.
-config INT340X_THERMAL
- tristate "ACPI INT340X thermal drivers"
- depends on X86 && ACPI
- select THERMAL_GOV_USER_SPACE
- select ACPI_THERMAL_REL
- select ACPI_FAN
- select INTEL_SOC_DTS_IOSF_CORE
- select THERMAL_WRITABLE_TRIPS
- help
- Newer laptops and tablets that use ACPI may have thermal sensors and
- other devices with thermal control capabilities outside the core
- CPU/SOC, for thermal safety reasons.
- They are exposed for the OS to use via the INT3400 ACPI device object
- as the master, and INT3401~INT340B ACPI device objects as the slaves.
- Enable this to expose the temperature information and cooling ability
- from these objects to userspace via the normal thermal framework.
- This means that a wide range of applications and GUI widgets can show
- the information to the user or use this information for making
- decisions. For example, the Intel Thermal Daemon can use this
- information to allow the user to select his laptop to run without
- turning on the fans.
-
-config ACPI_THERMAL_REL
- tristate
- depends on ACPI
+menu "ACPI INT340X thermal drivers"
+source drivers/thermal/int340x_thermal/Kconfig
+endmenu
config INTEL_PCH_THERMAL
tristate "Intel PCH Thermal Reporting Driver"
@@ -399,6 +367,17 @@ depends on ARCH_STI && OF
source "drivers/thermal/st/Kconfig"
endmenu
+config TANGO_THERMAL
+ tristate "Tango thermal management"
+ depends on ARCH_TANGO || COMPILE_TEST
+ help
+ Enable the Tango thermal driver, which supports the primitive
+ temperature sensor embedded in Tango chips since the SMP8758.
+ This sensor only generates a 1-bit signal to indicate whether
+ the die temperature exceeds a programmable threshold.
+
+source "drivers/thermal/tegra/Kconfig"
+
config QCOM_SPMI_TEMP_ALARM
tristate "Qualcomm SPMI PMIC Temperature Alarm"
depends on OF && SPMI && IIO
@@ -410,4 +389,14 @@ config QCOM_SPMI_TEMP_ALARM
real time die temperature if an ADC is present or an estimate of the
temperature based upon the over temperature stage value.
+config GENERIC_ADC_THERMAL
+ tristate "Generic ADC based thermal sensor"
+ depends on IIO
+ help
+ This enabled a thermal sysfs driver for the temperature sensor
+ which is connected to the General Purpose ADC. The ADC channel
+ is read via IIO framework and the channel information is provided
+ to this driver. This driver reports the temperature by reading ADC
+ channel and converts it to temperature based on lookup table.
+
endif