summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/8250
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250')
-rw-r--r--drivers/tty/serial/8250/8250_core.c27
-rw-r--r--drivers/tty/serial/8250/8250_dw.c19
-rw-r--r--drivers/tty/serial/8250/8250_early.c2
-rw-r--r--drivers/tty/serial/8250/8250_ingenic.c266
-rw-r--r--drivers/tty/serial/8250/8250_lpc18xx.c230
-rw-r--r--drivers/tty/serial/8250/8250_mtk.c119
-rw-r--r--drivers/tty/serial/8250/8250_omap.c123
-rw-r--r--drivers/tty/serial/8250/8250_pci.c41
-rw-r--r--drivers/tty/serial/8250/8250_uniphier.c257
-rw-r--r--drivers/tty/serial/8250/Kconfig24
-rw-r--r--drivers/tty/serial/8250/Makefile5
11 files changed, 978 insertions, 135 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 87e25a6f0..2736eb262 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -85,19 +85,6 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define CONFIG_SERIAL_DETECT_IRQ 1
-#endif
-#ifdef CONFIG_SERIAL_8250_MANY_PORTS
-#define CONFIG_SERIAL_MANY_PORTS 1
-#endif
-
-/*
- * HUB6 is always on. This will be removed once the header
- * files have been cleaned.
- */
-#define CONFIG_HUB6 1
-
#include <asm/serial.h>
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
@@ -2019,8 +2006,9 @@ EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl);
static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
if (port->set_mctrl)
- return port->set_mctrl(port, mctrl);
- return serial8250_do_set_mctrl(port, mctrl);
+ port->set_mctrl(port, mctrl);
+ else
+ serial8250_do_set_mctrl(port, mctrl);
}
static void serial8250_break_ctl(struct uart_port *port, int break_state)
@@ -3548,6 +3536,9 @@ static struct console univ8250_console = {
static int __init univ8250_console_init(void)
{
+ if (nr_uarts == 0)
+ return -ENODEV;
+
serial8250_isa_init_ports();
register_console(&univ8250_console);
return 0;
@@ -3578,7 +3569,7 @@ int __init early_serial_setup(struct uart_port *port)
{
struct uart_port *p;
- if (port->line >= ARRAY_SIZE(serial8250_ports))
+ if (port->line >= ARRAY_SIZE(serial8250_ports) || nr_uarts == 0)
return -ENODEV;
serial8250_isa_init_ports();
@@ -3850,7 +3841,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->port.mapbase = up->port.mapbase;
uart->port.mapsize = up->port.mapsize;
uart->port.private_data = up->port.private_data;
- uart->port.fifosize = up->port.fifosize;
uart->tx_loadsz = up->tx_loadsz;
uart->capabilities = up->capabilities;
uart->port.throttle = up->port.throttle;
@@ -3945,6 +3935,9 @@ static int __init serial8250_init(void)
{
int ret;
+ if (nr_uarts == 0)
+ return -ENODEV;
+
serial8250_isa_init_ports();
printk(KERN_INFO "Serial: 8250/16550 driver, "
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 176f18f2e..d48b50641 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -377,6 +377,16 @@ static int dw8250_probe_of(struct uart_port *p,
return 0;
}
+static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
+{
+ struct device *dev = param;
+
+ if (dev != chan->device->dev->parent)
+ return false;
+
+ return true;
+}
+
static int dw8250_probe_acpi(struct uart_8250_port *up,
struct dw8250_data *data)
{
@@ -389,8 +399,15 @@ static int dw8250_probe_acpi(struct uart_8250_port *up,
p->serial_out = dw8250_serial_out32;
p->regshift = 2;
- up->dma = &data->dma;
+ /* Platforms with iDMA */
+ if (platform_get_resource_byname(to_platform_device(up->port.dev),
+ IORESOURCE_MEM, "lpss_priv")) {
+ data->dma.rx_param = up->port.dev->parent;
+ data->dma.tx_param = up->port.dev->parent;
+ data->dma.fn = dw8250_idma_filter;
+ }
+ up->dma = &data->dma;
up->dma->rxconf.src_maxburst = p->fifosize / 4;
up->dma->txconf.dst_maxburst = p->fifosize / 4;
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index f8adaf2c9..6e0116bd9 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -131,7 +131,7 @@ static void __init init_port(struct earlycon_device *device)
serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
}
-static int __init early_serial8250_setup(struct earlycon_device *device,
+int __init early_serial8250_setup(struct earlycon_device *device,
const char *options)
{
if (!(device->port.membase || device->port.iobase))
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
new file mode 100644
index 000000000..21bf81fe7
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -0,0 +1,266 @@
+/*
+ * Copyright (C) 2010 Lars-Peter Clausen <lars@metafoo.de>
+ * Copyright (C) 2015 Imagination Technologies
+ *
+ * Ingenic SoC UART support
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/io.h>
+#include <linux/libfdt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+struct ingenic_uart_data {
+ struct clk *clk_module;
+ struct clk *clk_baud;
+ int line;
+};
+
+#define UART_FCR_UME BIT(4)
+
+static struct earlycon_device *early_device;
+
+static uint8_t __init early_in(struct uart_port *port, int offset)
+{
+ return readl(port->membase + (offset << 2));
+}
+
+static void __init early_out(struct uart_port *port, int offset, uint8_t value)
+{
+ writel(value, port->membase + (offset << 2));
+}
+
+static void __init ingenic_early_console_putc(struct uart_port *port, int c)
+{
+ uint8_t lsr;
+
+ do {
+ lsr = early_in(port, UART_LSR);
+ } while ((lsr & UART_LSR_TEMT) == 0);
+
+ early_out(port, UART_TX, c);
+}
+
+static void __init ingenic_early_console_write(struct console *console,
+ const char *s, unsigned int count)
+{
+ uart_console_write(&early_device->port, s, count,
+ ingenic_early_console_putc);
+}
+
+static void __init ingenic_early_console_setup_clock(struct earlycon_device *dev)
+{
+ void *fdt = initial_boot_params;
+ const __be32 *prop;
+ int offset;
+
+ offset = fdt_path_offset(fdt, "/ext");
+ if (offset < 0)
+ return;
+
+ prop = fdt_getprop(fdt, offset, "clock-frequency", NULL);
+ if (!prop)
+ return;
+
+ dev->port.uartclk = be32_to_cpup(prop);
+}
+
+static int __init ingenic_early_console_setup(struct earlycon_device *dev,
+ const char *opt)
+{
+ struct uart_port *port = &dev->port;
+ unsigned int baud, divisor;
+
+ if (!dev->port.membase)
+ return -ENODEV;
+
+ ingenic_early_console_setup_clock(dev);
+
+ baud = dev->baud ?: 115200;
+ divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud);
+
+ early_out(port, UART_IER, 0);
+ early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
+ early_out(port, UART_DLL, 0);
+ early_out(port, UART_DLM, 0);
+ early_out(port, UART_LCR, UART_LCR_WLEN8);
+ early_out(port, UART_FCR, UART_FCR_UME | UART_FCR_CLEAR_XMIT |
+ UART_FCR_CLEAR_RCVR | UART_FCR_ENABLE_FIFO);
+ early_out(port, UART_MCR, UART_MCR_RTS | UART_MCR_DTR);
+
+ early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
+ early_out(port, UART_DLL, divisor & 0xff);
+ early_out(port, UART_DLM, (divisor >> 8) & 0xff);
+ early_out(port, UART_LCR, UART_LCR_WLEN8);
+
+ early_device = dev;
+ dev->con->write = ingenic_early_console_write;
+
+ return 0;
+}
+
+EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart",
+ ingenic_early_console_setup);
+
+EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart",
+ ingenic_early_console_setup);
+
+EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart",
+ ingenic_early_console_setup);
+
+static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
+{
+ switch (offset) {
+ case UART_FCR:
+ /* UART module enable */
+ value |= UART_FCR_UME;
+ break;
+
+ case UART_IER:
+ value |= (value & 0x4) << 2;
+ break;
+
+ default:
+ break;
+ }
+
+ writeb(value, p->membase + (offset << p->regshift));
+}
+
+static int ingenic_uart_probe(struct platform_device *pdev)
+{
+ struct uart_8250_port uart = {};
+ struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ struct ingenic_uart_data *data;
+ int err, line;
+
+ if (!regs || !irq) {
+ dev_err(&pdev->dev, "no registers/irq defined\n");
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&uart.port.lock);
+ uart.port.type = PORT_16550;
+ uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.mapbase = regs->start;
+ uart.port.regshift = 2;
+ uart.port.serial_out = ingenic_uart_serial_out;
+ uart.port.irq = irq->start;
+ uart.port.dev = &pdev->dev;
+
+ /* Check for a fixed line number */
+ line = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (line >= 0)
+ uart.port.line = line;
+
+ uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
+ resource_size(regs));
+ if (!uart.port.membase)
+ return -ENOMEM;
+
+ data->clk_module = devm_clk_get(&pdev->dev, "module");
+ if (IS_ERR(data->clk_module)) {
+ err = PTR_ERR(data->clk_module);
+ if (err != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "unable to get module clock: %d\n", err);
+ return err;
+ }
+
+ data->clk_baud = devm_clk_get(&pdev->dev, "baud");
+ if (IS_ERR(data->clk_baud)) {
+ err = PTR_ERR(data->clk_baud);
+ if (err != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "unable to get baud clock: %d\n", err);
+ return err;
+ }
+
+ err = clk_prepare_enable(data->clk_module);
+ if (err) {
+ dev_err(&pdev->dev, "could not enable module clock: %d\n", err);
+ goto out;
+ }
+
+ err = clk_prepare_enable(data->clk_baud);
+ if (err) {
+ dev_err(&pdev->dev, "could not enable baud clock: %d\n", err);
+ goto out_disable_moduleclk;
+ }
+ uart.port.uartclk = clk_get_rate(data->clk_baud);
+
+ data->line = serial8250_register_8250_port(&uart);
+ if (data->line < 0) {
+ err = data->line;
+ goto out_disable_baudclk;
+ }
+
+ platform_set_drvdata(pdev, data);
+ return 0;
+
+out_disable_baudclk:
+ clk_disable_unprepare(data->clk_baud);
+out_disable_moduleclk:
+ clk_disable_unprepare(data->clk_module);
+out:
+ return err;
+}
+
+static int ingenic_uart_remove(struct platform_device *pdev)
+{
+ struct ingenic_uart_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+ clk_disable_unprepare(data->clk_module);
+ clk_disable_unprepare(data->clk_baud);
+ return 0;
+}
+
+static const struct of_device_id of_match[] = {
+ { .compatible = "ingenic,jz4740-uart" },
+ { .compatible = "ingenic,jz4775-uart" },
+ { .compatible = "ingenic,jz4780-uart" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match);
+
+static struct platform_driver ingenic_uart_platform_driver = {
+ .driver = {
+ .name = "ingenic-uart",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match,
+ },
+ .probe = ingenic_uart_probe,
+ .remove = ingenic_uart_remove,
+};
+
+module_platform_driver(ingenic_uart_platform_driver);
+
+MODULE_AUTHOR("Paul Burton");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Ingenic SoC UART driver");
diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
new file mode 100644
index 000000000..99cd47885
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -0,0 +1,230 @@
+/*
+ * Serial port driver for NXP LPC18xx/43xx UART
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on 8250_mtk.c:
+ * Copyright (c) 2014 MundoReader S.L.
+ * Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+/* Additional LPC18xx/43xx 8250 registers and bits */
+#define LPC18XX_UART_RS485CTRL (0x04c / sizeof(u32))
+#define LPC18XX_UART_RS485CTRL_NMMEN BIT(0)
+#define LPC18XX_UART_RS485CTRL_DCTRL BIT(4)
+#define LPC18XX_UART_RS485CTRL_OINV BIT(5)
+#define LPC18XX_UART_RS485DLY (0x054 / sizeof(u32))
+#define LPC18XX_UART_RS485DLY_MAX 255
+
+struct lpc18xx_uart_data {
+ struct uart_8250_dma dma;
+ struct clk *clk_uart;
+ struct clk *clk_reg;
+ int line;
+};
+
+static int lpc18xx_rs485_config(struct uart_port *port,
+ struct serial_rs485 *rs485)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ u32 rs485_ctrl_reg = 0;
+ u32 rs485_dly_reg = 0;
+ unsigned baud_clk;
+
+ if (rs485->flags & SER_RS485_ENABLED)
+ memset(rs485->padding, 0, sizeof(rs485->padding));
+ else
+ memset(rs485, 0, sizeof(*rs485));
+
+ rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
+ SER_RS485_RTS_AFTER_SEND;
+
+ if (rs485->flags & SER_RS485_ENABLED) {
+ rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_NMMEN |
+ LPC18XX_UART_RS485CTRL_DCTRL;
+
+ if (rs485->flags & SER_RS485_RTS_ON_SEND) {
+ rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_OINV;
+ rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
+ } else {
+ rs485->flags |= SER_RS485_RTS_AFTER_SEND;
+ }
+ }
+
+ if (rs485->delay_rts_after_send) {
+ baud_clk = port->uartclk / up->dl_read(up);
+ rs485_dly_reg = DIV_ROUND_UP(rs485->delay_rts_after_send
+ * baud_clk, MSEC_PER_SEC);
+
+ if (rs485_dly_reg > LPC18XX_UART_RS485DLY_MAX)
+ rs485_dly_reg = LPC18XX_UART_RS485DLY_MAX;
+
+ /* Calculate the resulting delay in ms */
+ rs485->delay_rts_after_send = (rs485_dly_reg * MSEC_PER_SEC)
+ / baud_clk;
+ }
+
+ /* Delay RTS before send not supported */
+ rs485->delay_rts_before_send = 0;
+
+ serial_out(up, LPC18XX_UART_RS485CTRL, rs485_ctrl_reg);
+ serial_out(up, LPC18XX_UART_RS485DLY, rs485_dly_reg);
+
+ port->rs485 = *rs485;
+
+ return 0;
+}
+
+static void lpc18xx_uart_serial_out(struct uart_port *p, int offset, int value)
+{
+ /*
+ * For DMA mode one must ensure that the UART_FCR_DMA_SELECT
+ * bit is set when FIFO is enabled. Even if DMA is not used
+ * setting this bit doesn't seem to affect anything.
+ */
+ if (offset == UART_FCR && (value & UART_FCR_ENABLE_FIFO))
+ value |= UART_FCR_DMA_SELECT;
+
+ offset = offset << p->regshift;
+ writel(value, p->membase + offset);
+}
+
+static int lpc18xx_serial_probe(struct platform_device *pdev)
+{
+ struct lpc18xx_uart_data *data;
+ struct uart_8250_port uart;
+ struct resource *res;
+ int irq, ret;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "irq not found");
+ return irq;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "memory resource not found");
+ return -EINVAL;
+ }
+
+ memset(&uart, 0, sizeof(uart));
+
+ uart.port.membase = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!uart.port.membase)
+ return -ENOMEM;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->clk_uart = devm_clk_get(&pdev->dev, "uartclk");
+ if (IS_ERR(data->clk_uart)) {
+ dev_err(&pdev->dev, "uart clock not found\n");
+ return PTR_ERR(data->clk_uart);
+ }
+
+ data->clk_reg = devm_clk_get(&pdev->dev, "reg");
+ if (IS_ERR(data->clk_reg)) {
+ dev_err(&pdev->dev, "reg clock not found\n");
+ return PTR_ERR(data->clk_reg);
+ }
+
+ ret = clk_prepare_enable(data->clk_reg);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable reg clock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(data->clk_uart);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable uart clock\n");
+ goto dis_clk_reg;
+ }
+
+ ret = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (ret >= 0)
+ uart.port.line = ret;
+
+ data->dma.rx_param = data;
+ data->dma.tx_param = data;
+
+ spin_lock_init(&uart.port.lock);
+ uart.port.dev = &pdev->dev;
+ uart.port.irq = irq;
+ uart.port.iotype = UPIO_MEM32;
+ uart.port.mapbase = res->start;
+ uart.port.regshift = 2;
+ uart.port.type = PORT_16550A;
+ uart.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SKIP_TEST;
+ uart.port.uartclk = clk_get_rate(data->clk_uart);
+ uart.port.private_data = data;
+ uart.port.rs485_config = lpc18xx_rs485_config;
+ uart.port.serial_out = lpc18xx_uart_serial_out;
+
+ uart.dma = &data->dma;
+ uart.dma->rxconf.src_maxburst = 1;
+ uart.dma->txconf.dst_maxburst = 1;
+
+ ret = serial8250_register_8250_port(&uart);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to register 8250 port\n");
+ goto dis_uart_clk;
+ }
+
+ data->line = ret;
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+
+dis_uart_clk:
+ clk_disable_unprepare(data->clk_uart);
+dis_clk_reg:
+ clk_disable_unprepare(data->clk_reg);
+ return ret;
+}
+
+static int lpc18xx_serial_remove(struct platform_device *pdev)
+{
+ struct lpc18xx_uart_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+ clk_disable_unprepare(data->clk_uart);
+ clk_disable_unprepare(data->clk_reg);
+
+ return 0;
+}
+
+static const struct of_device_id lpc18xx_serial_match[] = {
+ { .compatible = "nxp,lpc1850-uart" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_serial_match);
+
+static struct platform_driver lpc18xx_serial_driver = {
+ .probe = lpc18xx_serial_probe,
+ .remove = lpc18xx_serial_remove,
+ .driver = {
+ .name = "lpc18xx-uart",
+ .of_match_table = lpc18xx_serial_match,
+ },
+};
+module_platform_driver(lpc18xx_serial_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("Serial port driver NXP LPC18xx/43xx devices");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 7a11fac77..78883ca64 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -34,6 +34,7 @@
struct mtk8250_data {
int line;
struct clk *uart_clk;
+ struct clk *bus_clk;
};
static void
@@ -115,6 +116,36 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
tty_termios_encode_baud_rate(termios, baud, baud);
}
+static int mtk8250_runtime_suspend(struct device *dev)
+{
+ struct mtk8250_data *data = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(data->uart_clk);
+ clk_disable_unprepare(data->bus_clk);
+
+ return 0;
+}
+
+static int mtk8250_runtime_resume(struct device *dev)
+{
+ struct mtk8250_data *data = dev_get_drvdata(dev);
+ int err;
+
+ err = clk_prepare_enable(data->uart_clk);
+ if (err) {
+ dev_warn(dev, "Can't enable clock\n");
+ return err;
+ }
+
+ err = clk_prepare_enable(data->bus_clk);
+ if (err) {
+ dev_warn(dev, "Can't enable bus clock\n");
+ return err;
+ }
+
+ return 0;
+}
+
static void
mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
{
@@ -130,22 +161,24 @@ mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p,
struct mtk8250_data *data)
{
- int err;
- struct device_node *np = pdev->dev.of_node;
-
- data->uart_clk = of_clk_get(np, 0);
+ data->uart_clk = devm_clk_get(&pdev->dev, "baud");
if (IS_ERR(data->uart_clk)) {
- dev_warn(&pdev->dev, "Can't get timer clock\n");
- return PTR_ERR(data->uart_clk);
+ /*
+ * For compatibility with older device trees try unnamed
+ * clk when no baud clk can be found.
+ */
+ data->uart_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(data->uart_clk)) {
+ dev_warn(&pdev->dev, "Can't get uart clock\n");
+ return PTR_ERR(data->uart_clk);
+ }
+
+ return 0;
}
- err = clk_prepare_enable(data->uart_clk);
- if (err) {
- dev_warn(&pdev->dev, "Can't prepare clock\n");
- clk_put(data->uart_clk);
- return err;
- }
- p->uartclk = clk_get_rate(data->uart_clk);
+ data->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(data->bus_clk))
+ return PTR_ERR(data->bus_clk);
return 0;
}
@@ -190,19 +223,24 @@ static int mtk8250_probe(struct platform_device *pdev)
uart.port.regshift = 2;
uart.port.private_data = data;
uart.port.set_termios = mtk8250_set_termios;
+ uart.port.uartclk = clk_get_rate(data->uart_clk);
/* Disable Rate Fix function */
writel(0x0, uart.port.membase +
(MTK_UART_RATE_FIX << uart.port.regshift));
- data->line = serial8250_register_8250_port(&uart);
- if (data->line < 0)
- return data->line;
-
platform_set_drvdata(pdev, data);
- pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
+ if (!pm_runtime_enabled(&pdev->dev)) {
+ err = mtk8250_runtime_resume(&pdev->dev);
+ if (err)
+ return err;
+ }
+
+ data->line = serial8250_register_8250_port(&uart);
+ if (data->line < 0)
+ return data->line;
return 0;
}
@@ -214,13 +252,13 @@ static int mtk8250_remove(struct platform_device *pdev)
pm_runtime_get_sync(&pdev->dev);
serial8250_unregister_port(data->line);
- if (!IS_ERR(data->uart_clk)) {
- clk_disable_unprepare(data->uart_clk);
- clk_put(data->uart_clk);
- }
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
+
+ if (!pm_runtime_status_suspended(&pdev->dev))
+ mtk8250_runtime_suspend(&pdev->dev);
+
return 0;
}
@@ -244,28 +282,6 @@ static int mtk8250_resume(struct device *dev)
}
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM
-static int mtk8250_runtime_suspend(struct device *dev)
-{
- struct mtk8250_data *data = dev_get_drvdata(dev);
-
- if (!IS_ERR(data->uart_clk))
- clk_disable_unprepare(data->uart_clk);
-
- return 0;
-}
-
-static int mtk8250_runtime_resume(struct device *dev)
-{
- struct mtk8250_data *data = dev_get_drvdata(dev);
-
- if (!IS_ERR(data->uart_clk))
- clk_prepare_enable(data->uart_clk);
-
- return 0;
-}
-#endif
-
static const struct dev_pm_ops mtk8250_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(mtk8250_suspend, mtk8250_resume)
SET_RUNTIME_PM_OPS(mtk8250_runtime_suspend, mtk8250_runtime_resume,
@@ -289,6 +305,21 @@ static struct platform_driver mtk8250_platform_driver = {
};
module_platform_driver(mtk8250_platform_driver);
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init early_mtk8250_setup(struct earlycon_device *device,
+ const char *options)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->port.iotype = UPIO_MEM32;
+
+ return early_serial8250_setup(device, NULL);
+}
+
+OF_EARLYCON_DECLARE(mtk8250, "mediatek,mt6577-uart", early_mtk8250_setup);
+#endif
+
MODULE_AUTHOR("Matthias Brugger");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Mediatek 8250 serial port driver");
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index dce1a2370..d75a66c72 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -22,6 +22,7 @@
#include <linux/pm_runtime.h>
#include <linux/console.h>
#include <linux/pm_qos.h>
+#include <linux/pm_wakeirq.h>
#include <linux/dma-mapping.h>
#include "8250.h"
@@ -98,6 +99,7 @@ struct omap8250_priv {
struct pm_qos_request pm_qos_request;
struct work_struct qos_work;
struct uart_8250_dma omap8250_dma;
+ spinlock_t rx_dma_lock;
};
static u32 uart_read(struct uart_8250_port *up, u32 reg)
@@ -551,17 +553,6 @@ static void omap8250_uart_qos_work(struct work_struct *work)
pm_qos_update_request(&priv->pm_qos_request, priv->latency);
}
-static irqreturn_t omap_wake_irq(int irq, void *dev_id)
-{
- struct uart_port *port = dev_id;
- int ret;
-
- ret = port->handle_irq(port);
- if (ret)
- return IRQ_HANDLED;
- return IRQ_NONE;
-}
-
#ifdef CONFIG_SERIAL_8250_DMA
static int omap_8250_dma_handle_irq(struct uart_port *port);
#endif
@@ -595,11 +586,9 @@ static int omap_8250_startup(struct uart_port *port)
int ret;
if (priv->wakeirq) {
- ret = request_irq(priv->wakeirq, omap_wake_irq,
- port->irqflags, "uart wakeup irq", port);
+ ret = dev_pm_set_dedicated_wake_irq(port->dev, priv->wakeirq);
if (ret)
return ret;
- disable_irq(priv->wakeirq);
}
pm_runtime_get_sync(port->dev);
@@ -648,8 +637,7 @@ static int omap_8250_startup(struct uart_port *port)
err:
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
- if (priv->wakeirq)
- free_irq(priv->wakeirq, port);
+ dev_pm_clear_wake_irq(port->dev);
return ret;
}
@@ -681,10 +669,8 @@ static void omap_8250_shutdown(struct uart_port *port)
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
-
free_irq(port->irq, port);
- if (priv->wakeirq)
- free_irq(priv->wakeirq, port);
+ dev_pm_clear_wake_irq(port->dev);
}
static void omap_8250_throttle(struct uart_port *port)
@@ -726,14 +712,21 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir);
static void __dma_rx_do_complete(struct uart_8250_port *p, bool error)
{
+ struct omap8250_priv *priv = p->port.private_data;
struct uart_8250_dma *dma = p->dma;
struct tty_port *tty_port = &p->port.state->port;
struct dma_tx_state state;
int count;
+ unsigned long flags;
dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
dma->rx_size, DMA_FROM_DEVICE);
+ spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
+ if (!dma->rx_running)
+ goto unlock;
+
dma->rx_running = 0;
dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
dmaengine_terminate_all(dma->rxchan);
@@ -742,6 +735,9 @@ static void __dma_rx_do_complete(struct uart_8250_port *p, bool error)
tty_insert_flip_string(tty_port, dma->rx_buf, count);
p->port.icount.rx += count;
+unlock:
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+
if (!error)
omap_8250_rx_dma(p, 0);
@@ -753,28 +749,45 @@ static void __dma_rx_complete(void *param)
__dma_rx_do_complete(param, false);
}
+static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
+{
+ struct omap8250_priv *priv = p->port.private_data;
+ struct uart_8250_dma *dma = p->dma;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
+ if (!dma->rx_running) {
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+ return;
+ }
+
+ dmaengine_pause(dma->rxchan);
+
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+
+ __dma_rx_do_complete(p, true);
+}
+
static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
{
+ struct omap8250_priv *priv = p->port.private_data;
struct uart_8250_dma *dma = p->dma;
+ int err = 0;
struct dma_async_tx_descriptor *desc;
+ unsigned long flags;
switch (iir & 0x3f) {
case UART_IIR_RLSI:
/* 8250_core handles errors and break interrupts */
- if (dma->rx_running) {
- dmaengine_pause(dma->rxchan);
- __dma_rx_do_complete(p, true);
- }
+ omap_8250_rx_dma_flush(p);
return -EIO;
case UART_IIR_RX_TIMEOUT:
/*
* If RCVR FIFO trigger level was not reached, complete the
* transfer and let 8250_core copy the remaining data.
*/
- if (dma->rx_running) {
- dmaengine_pause(dma->rxchan);
- __dma_rx_do_complete(p, true);
- }
+ omap_8250_rx_dma_flush(p);
return -ETIMEDOUT;
case UART_IIR_RDI:
/*
@@ -786,24 +799,25 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
* the DMA won't do anything soon so we have to cancel the DMA
* transfer and purge the FIFO manually.
*/
- if (dma->rx_running) {
- dmaengine_pause(dma->rxchan);
- __dma_rx_do_complete(p, true);
- }
+ omap_8250_rx_dma_flush(p);
return -ETIMEDOUT;
default:
break;
}
+ spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
if (dma->rx_running)
- return 0;
+ goto out;
desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr,
dma->rx_size, DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc)
- return -EBUSY;
+ if (!desc) {
+ err = -EBUSY;
+ goto out;
+ }
dma->rx_running = 1;
desc->callback = __dma_rx_complete;
@@ -815,7 +829,9 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
dma->rx_size, DMA_FROM_DEVICE);
dma_async_issue_pending(dma->rxchan);
- return 0;
+out:
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+ return err;
}
static int omap_8250_tx_dma(struct uart_8250_port *p);
@@ -1129,6 +1145,8 @@ static int omap8250_probe(struct platform_device *pdev)
priv->latency);
INIT_WORK(&priv->qos_work, omap8250_uart_qos_work);
+ spin_lock_init(&priv->rx_dma_lock);
+
device_init_wakeup(&pdev->dev, true);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
@@ -1193,31 +1211,6 @@ static int omap8250_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-
-static inline void omap8250_enable_wakeirq(struct omap8250_priv *priv,
- bool enable)
-{
- if (!priv->wakeirq)
- return;
-
- if (enable)
- enable_irq(priv->wakeirq);
- else
- disable_irq_nosync(priv->wakeirq);
-}
-
-static void omap8250_enable_wakeup(struct omap8250_priv *priv,
- bool enable)
-{
- if (enable == priv->wakeups_enabled)
- return;
-
- omap8250_enable_wakeirq(priv, enable);
- priv->wakeups_enabled = enable;
-}
-#endif
-
#ifdef CONFIG_PM_SLEEP
static int omap8250_prepare(struct device *dev)
{
@@ -1244,11 +1237,6 @@ static int omap8250_suspend(struct device *dev)
serial8250_suspend_port(priv->line);
flush_work(&priv->qos_work);
-
- if (device_may_wakeup(dev))
- omap8250_enable_wakeup(priv, true);
- else
- omap8250_enable_wakeup(priv, false);
return 0;
}
@@ -1256,9 +1244,6 @@ static int omap8250_resume(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
- if (device_may_wakeup(dev))
- omap8250_enable_wakeup(priv, false);
-
serial8250_resume_port(priv->line);
return 0;
}
@@ -1300,7 +1285,6 @@ static int omap8250_runtime_suspend(struct device *dev)
return -EBUSY;
}
- omap8250_enable_wakeup(priv, true);
if (up->dma)
omap_8250_rx_dma(up, UART_IIR_RX_TIMEOUT);
@@ -1321,7 +1305,6 @@ static int omap8250_runtime_resume(struct device *dev)
return 0;
up = serial8250_get_port(priv->line);
- omap8250_enable_wakeup(priv, false);
loss_cntx = omap8250_lost_context(up);
if (loss_cntx)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 46bcebba5..e55f18b93 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1823,6 +1823,9 @@ static int pci_eg20t_init(struct pci_dev *dev)
#endif
}
+#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358
+#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
+
static int
pci_xr17c154_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -1832,6 +1835,15 @@ pci_xr17c154_setup(struct serial_private *priv,
return pci_default_setup(priv, board, port, idx);
}
+static inline int
+xr17v35x_has_slave(struct serial_private *priv)
+{
+ const int dev_id = priv->dev->device;
+
+ return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) ||
+ (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
+}
+
static int
pci_xr17v35x_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -1846,6 +1858,13 @@ pci_xr17v35x_setup(struct serial_private *priv,
port->port.flags |= UPF_EXAR_EFR;
/*
+ * Setup the uart clock for the devices on expansion slot to
+ * half the clock speed of the main chip (which is 125MHz)
+ */
+ if (xr17v35x_has_slave(priv) && idx >= 8)
+ port->port.uartclk = (7812500 * 16 / 2);
+
+ /*
* Setup Multipurpose Input/Output pins.
*/
if (idx == 0) {
@@ -1998,8 +2017,6 @@ pci_wch_ch38x_setup(struct serial_private *priv,
#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250
#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470
-#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
-
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
@@ -2524,6 +2541,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
},
{
.vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17V4358,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17v35x_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
.device = PCI_DEVICE_ID_EXAR_XR17V8358,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
@@ -3008,6 +3032,7 @@ enum pci_board_num_t {
pbn_exar_XR17V352,
pbn_exar_XR17V354,
pbn_exar_XR17V358,
+ pbn_exar_XR17V4358,
pbn_exar_XR17V8358,
pbn_exar_ibm_saturn,
pbn_pasemi_1682M,
@@ -3695,6 +3720,14 @@ static struct pciserial_board pci_boards[] = {
.reg_shift = 0,
.first_offset = 0,
},
+ [pbn_exar_XR17V4358] = {
+ .flags = FL_BASE0,
+ .num_ports = 12,
+ .base_baud = 7812500,
+ .uart_offset = 0x400,
+ .reg_shift = 0,
+ .first_offset = 0,
+ },
[pbn_exar_XR17V8358] = {
.flags = FL_BASE0,
.num_ports = 16,
@@ -5112,6 +5145,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17V358 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V4358,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17V4358 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V8358,
PCI_ANY_ID, PCI_ANY_ID,
0,
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
new file mode 100644
index 000000000..7d79425c2
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -0,0 +1,257 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+/* Most (but not all) of UniPhier UART devices have 64-depth FIFO. */
+#define UNIPHIER_UART_DEFAULT_FIFO_SIZE 64
+
+#define UNIPHIER_UART_CHAR_FCR 3 /* Character / FIFO Control Register */
+#define UNIPHIER_UART_LCR_MCR 4 /* Line/Modem Control Register */
+#define UNIPHIER_UART_LCR_SHIFT 8
+#define UNIPHIER_UART_DLR 9 /* Divisor Latch Register */
+
+struct uniphier8250_priv {
+ int line;
+ struct clk *clk;
+ spinlock_t atomic_write_lock;
+};
+
+/*
+ * The register map is slightly different from that of 8250.
+ * IO callbacks must be overridden for correct access to FCR, LCR, and MCR.
+ */
+static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
+{
+ unsigned int valshift = 0;
+
+ switch (offset) {
+ case UART_LCR:
+ valshift = UNIPHIER_UART_LCR_SHIFT;
+ /* fall through */
+ case UART_MCR:
+ offset = UNIPHIER_UART_LCR_MCR;
+ break;
+ default:
+ break;
+ }
+
+ offset <<= p->regshift;
+
+ /*
+ * The return value must be masked with 0xff because LCR and MCR reside
+ * in the same register that must be accessed by 32-bit write/read.
+ * 8 or 16 bit access to this hardware result in unexpected behavior.
+ */
+ return (readl(p->membase + offset) >> valshift) & 0xff;
+}
+
+static void uniphier_serial_out(struct uart_port *p, int offset, int value)
+{
+ unsigned int valshift = 0;
+ bool normal = false;
+
+ switch (offset) {
+ case UART_FCR:
+ offset = UNIPHIER_UART_CHAR_FCR;
+ break;
+ case UART_LCR:
+ valshift = UNIPHIER_UART_LCR_SHIFT;
+ /* Divisor latch access bit does not exist. */
+ value &= ~(UART_LCR_DLAB << valshift);
+ /* fall through */
+ case UART_MCR:
+ offset = UNIPHIER_UART_LCR_MCR;
+ break;
+ default:
+ normal = true;
+ break;
+ }
+
+ offset <<= p->regshift;
+
+ if (normal) {
+ writel(value, p->membase + offset);
+ } else {
+ /*
+ * Special case: two registers share the same address that
+ * must be 32-bit accessed. As this is not longer atomic safe,
+ * take a lock just in case.
+ */
+ struct uniphier8250_priv *priv = p->private_data;
+ unsigned long flags;
+ u32 tmp;
+
+ spin_lock_irqsave(&priv->atomic_write_lock, flags);
+ tmp = readl(p->membase + offset);
+ tmp &= ~(0xff << valshift);
+ tmp |= value << valshift;
+ writel(tmp, p->membase + offset);
+ spin_unlock_irqrestore(&priv->atomic_write_lock, flags);
+ }
+}
+
+/*
+ * This hardware does not have the divisor latch access bit.
+ * The divisor latch register exists at different address.
+ * Override dl_read/write callbacks.
+ */
+static int uniphier_serial_dl_read(struct uart_8250_port *up)
+{
+ return readl(up->port.membase + UNIPHIER_UART_DLR);
+}
+
+static void uniphier_serial_dl_write(struct uart_8250_port *up, int value)
+{
+ writel(value, up->port.membase + UNIPHIER_UART_DLR);
+}
+
+static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port,
+ struct uniphier8250_priv *priv)
+{
+ int ret;
+ u32 prop;
+ struct device_node *np = dev->of_node;
+
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ dev_err(dev, "failed to get alias id\n");
+ return ret;
+ }
+ port->line = priv->line = ret;
+
+ /* Get clk rate through clk driver */
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "failed to get clock\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret < 0)
+ return ret;
+
+ port->uartclk = clk_get_rate(priv->clk);
+
+ /* Check for fifo size */
+ if (of_property_read_u32(np, "fifo-size", &prop) == 0)
+ port->fifosize = prop;
+ else
+ port->fifosize = UNIPHIER_UART_DEFAULT_FIFO_SIZE;
+
+ return 0;
+}
+
+static int uniphier_uart_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct uart_8250_port up;
+ struct uniphier8250_priv *priv;
+ struct resource *regs;
+ void __iomem *membase;
+ int irq;
+ int ret;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs) {
+ dev_err(dev, "failed to get memory resource");
+ return -EINVAL;
+ }
+
+ membase = devm_ioremap(dev, regs->start, resource_size(regs));
+ if (!membase)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "failed to get IRQ number");
+ return irq;
+ }
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ memset(&up, 0, sizeof(up));
+
+ ret = uniphier_of_serial_setup(dev, &up.port, priv);
+ if (ret < 0)
+ return ret;
+
+ spin_lock_init(&priv->atomic_write_lock);
+
+ up.port.dev = dev;
+ up.port.private_data = priv;
+ up.port.mapbase = regs->start;
+ up.port.mapsize = resource_size(regs);
+ up.port.membase = membase;
+ up.port.irq = irq;
+
+ up.port.type = PORT_16550A;
+ up.port.iotype = UPIO_MEM32;
+ up.port.regshift = 2;
+ up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE;
+ up.capabilities = UART_CAP_FIFO;
+
+ up.port.serial_in = uniphier_serial_in;
+ up.port.serial_out = uniphier_serial_out;
+ up.dl_read = uniphier_serial_dl_read;
+ up.dl_write = uniphier_serial_dl_write;
+
+ ret = serial8250_register_8250_port(&up);
+ if (ret < 0) {
+ dev_err(dev, "failed to register 8250 port\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static int uniphier_uart_remove(struct platform_device *pdev)
+{
+ struct uniphier8250_priv *priv = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(priv->line);
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static const struct of_device_id uniphier_uart_match[] = {
+ { .compatible = "socionext,uniphier-uart" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_uart_match);
+
+static struct platform_driver uniphier_uart_platform_driver = {
+ .probe = uniphier_uart_probe,
+ .remove = uniphier_uart_remove,
+ .driver = {
+ .name = "uniphier-uart",
+ .of_match_table = uniphier_uart_match,
+ },
+};
+module_platform_driver(uniphier_uart_platform_driver);
+
+MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
+MODULE_DESCRIPTION("UniPhier UART driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index c35070356..e1de1181b 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -336,9 +336,33 @@ config SERIAL_8250_FINTEK
LPC to 4 UART. This device has some RS485 functionality not available
through the PNP driver. If unsure, say N.
+config SERIAL_8250_LPC18XX
+ bool "NXP LPC18xx/43xx serial port support"
+ depends on SERIAL_8250 && OF && (ARCH_LPC18XX || COMPILE_TEST)
+ default ARCH_LPC18XX
+ help
+ If you have a LPC18xx/43xx based board and want to use the
+ serial port, say Y to this option. If unsure, say Y.
+
config SERIAL_8250_MT6577
bool "Mediatek serial port support"
depends on SERIAL_8250 && ARCH_MEDIATEK
help
If you have a Mediatek based board and want to use the
serial port, say Y to this option. If unsure, say N.
+
+config SERIAL_8250_UNIPHIER
+ tristate "Support for UniPhier on-chip UART"
+ depends on SERIAL_8250 && ARCH_UNIPHIER
+ help
+ If you have a UniPhier based board and want to use the on-chip
+ serial ports, say Y to this option. If unsure, say N.
+
+config SERIAL_8250_INGENIC
+ bool "Support for Ingenic SoC serial ports"
+ depends on SERIAL_8250_CONSOLE && OF_FLATTREE
+ select LIBFDT
+ select SERIAL_EARLYCON
+ help
+ If you have a system using an Ingenic SoC and wish to make use of
+ its UARTs, say Y to this option. If unsure, say N.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 31e7cdc68..706295913 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -22,4 +22,9 @@ obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
obj-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o
+obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
+obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o
+obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o
+
+CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt