summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/atmel_serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/atmel_serial.c')
-rw-r--r--drivers/tty/serial/atmel_serial.c2778
1 files changed, 2778 insertions, 0 deletions
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
new file mode 100644
index 000000000..5ca1dfb05
--- /dev/null
+++ b/drivers/tty/serial/atmel_serial.c
@@ -0,0 +1,2778 @@
+/*
+ * Driver for Atmel AT91 / AT32 Serial ports
+ * Copyright (C) 2003 Rick Bronson
+ *
+ * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * DMA support added by Chip Coldwell.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/tty_flip.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/atmel_pdc.h>
+#include <linux/atmel_serial.h>
+#include <linux/uaccess.h>
+#include <linux/platform_data/atmel.h>
+#include <linux/timer.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/suspend.h>
+
+#include <asm/io.h>
+#include <asm/ioctls.h>
+
+#define PDC_BUFFER_SIZE 512
+/* Revisit: We should calculate this based on the actual port settings */
+#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
+
+#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#include "serial_mctrl_gpio.h"
+
+static void atmel_start_rx(struct uart_port *port);
+static void atmel_stop_rx(struct uart_port *port);
+
+#ifdef CONFIG_SERIAL_ATMEL_TTYAT
+
+/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we
+ * should coexist with the 8250 driver, such as if we have an external 16C550
+ * UART. */
+#define SERIAL_ATMEL_MAJOR 204
+#define MINOR_START 154
+#define ATMEL_DEVICENAME "ttyAT"
+
+#else
+
+/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port
+ * name, but it is legally reserved for the 8250 driver. */
+#define SERIAL_ATMEL_MAJOR TTY_MAJOR
+#define MINOR_START 64
+#define ATMEL_DEVICENAME "ttyS"
+
+#endif
+
+#define ATMEL_ISR_PASS_LIMIT 256
+
+/* UART registers. CR is write-only, hence no GET macro */
+#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
+#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
+#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
+#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER)
+#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR)
+#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR)
+#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR)
+#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR)
+#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR)
+#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR)
+#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
+#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
+#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
+#define UART_GET_IP_NAME(port) __raw_readl((port)->membase + ATMEL_US_NAME)
+#define UART_GET_IP_VERSION(port) __raw_readl((port)->membase + ATMEL_US_VERSION)
+
+ /* PDC registers */
+#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
+#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
+
+#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
+#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR)
+#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR)
+#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR)
+#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR)
+
+#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
+#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
+#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
+
+struct atmel_dma_buffer {
+ unsigned char *buf;
+ dma_addr_t dma_addr;
+ unsigned int dma_size;
+ unsigned int ofs;
+};
+
+struct atmel_uart_char {
+ u16 status;
+ u16 ch;
+};
+
+#define ATMEL_SERIAL_RINGSIZE 1024
+
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+struct atmel_uart_port {
+ struct uart_port uart; /* uart */
+ struct clk *clk; /* uart clock */
+ int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */
+ u32 backup_imr; /* IMR saved during suspend */
+ int break_active; /* break being received */
+
+ bool use_dma_rx; /* enable DMA receiver */
+ bool use_pdc_rx; /* enable PDC receiver */
+ short pdc_rx_idx; /* current PDC RX buffer */
+ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
+
+ bool use_dma_tx; /* enable DMA transmitter */
+ bool use_pdc_tx; /* enable PDC transmitter */
+ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
+
+ spinlock_t lock_tx; /* port lock */
+ spinlock_t lock_rx; /* port lock */
+ struct dma_chan *chan_tx;
+ struct dma_chan *chan_rx;
+ struct dma_async_tx_descriptor *desc_tx;
+ struct dma_async_tx_descriptor *desc_rx;
+ dma_cookie_t cookie_tx;
+ dma_cookie_t cookie_rx;
+ struct scatterlist sg_tx;
+ struct scatterlist sg_rx;
+ struct tasklet_struct tasklet;
+ unsigned int irq_status;
+ unsigned int irq_status_prev;
+
+ struct circ_buf rx_ring;
+
+ struct mctrl_gpios *gpios;
+ int gpio_irq[UART_GPIO_MAX];
+ unsigned int tx_done_mask;
+ bool ms_irq_enabled;
+ bool is_usart; /* usart or uart */
+ struct timer_list uart_timer; /* uart timer */
+
+ bool suspended;
+ unsigned int pending;
+ unsigned int pending_status;
+ spinlock_t lock_suspended;
+
+ int (*prepare_rx)(struct uart_port *port);
+ int (*prepare_tx)(struct uart_port *port);
+ void (*schedule_rx)(struct uart_port *port);
+ void (*schedule_tx)(struct uart_port *port);
+ void (*release_rx)(struct uart_port *port);
+ void (*release_tx)(struct uart_port *port);
+};
+
+static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
+
+#ifdef SUPPORT_SYSRQ
+static struct console atmel_console;
+#endif
+
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_serial_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-usart" },
+ { .compatible = "atmel,at91sam9260-usart" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_serial_dt_ids);
+#endif
+
+static inline struct atmel_uart_port *
+to_atmel_uart_port(struct uart_port *uart)
+{
+ return container_of(uart, struct atmel_uart_port, uart);
+}
+
+#ifdef CONFIG_SERIAL_ATMEL_PDC
+static bool atmel_use_pdc_rx(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ return atmel_port->use_pdc_rx;
+}
+
+static bool atmel_use_pdc_tx(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ return atmel_port->use_pdc_tx;
+}
+#else
+static bool atmel_use_pdc_rx(struct uart_port *port)
+{
+ return false;
+}
+
+static bool atmel_use_pdc_tx(struct uart_port *port)
+{
+ return false;
+}
+#endif
+
+static bool atmel_use_dma_tx(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ return atmel_port->use_dma_tx;
+}
+
+static bool atmel_use_dma_rx(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ return atmel_port->use_dma_rx;
+}
+
+static unsigned int atmel_get_lines_status(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int status, ret = 0;
+
+ status = UART_GET_CSR(port);
+
+ mctrl_gpio_get(atmel_port->gpios, &ret);
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_CTS))) {
+ if (ret & TIOCM_CTS)
+ status &= ~ATMEL_US_CTS;
+ else
+ status |= ATMEL_US_CTS;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_DSR))) {
+ if (ret & TIOCM_DSR)
+ status &= ~ATMEL_US_DSR;
+ else
+ status |= ATMEL_US_DSR;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_RI))) {
+ if (ret & TIOCM_RI)
+ status &= ~ATMEL_US_RI;
+ else
+ status |= ATMEL_US_RI;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_DCD))) {
+ if (ret & TIOCM_CD)
+ status &= ~ATMEL_US_DCD;
+ else
+ status |= ATMEL_US_DCD;
+ }
+
+ return status;
+}
+
+/* Enable or disable the rs485 support */
+static int atmel_config_rs485(struct uart_port *port,
+ struct serial_rs485 *rs485conf)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int mode;
+
+ /* Disable interrupts */
+ UART_PUT_IDR(port, atmel_port->tx_done_mask);
+
+ mode = UART_GET_MR(port);
+
+ /* Resetting serial mode to RS232 (0x0) */
+ mode &= ~ATMEL_US_USMODE;
+
+ port->rs485 = *rs485conf;
+
+ if (rs485conf->flags & SER_RS485_ENABLED) {
+ dev_dbg(port->dev, "Setting UART to RS485\n");
+ atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
+ UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
+ mode |= ATMEL_US_USMODE_RS485;
+ } else {
+ dev_dbg(port->dev, "Setting UART to RS232\n");
+ if (atmel_use_pdc_tx(port))
+ atmel_port->tx_done_mask = ATMEL_US_ENDTX |
+ ATMEL_US_TXBUFE;
+ else
+ atmel_port->tx_done_mask = ATMEL_US_TXRDY;
+ }
+ UART_PUT_MR(port, mode);
+
+ /* Enable interrupts */
+ UART_PUT_IER(port, atmel_port->tx_done_mask);
+
+ return 0;
+}
+
+/*
+ * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
+ */
+static u_int atmel_tx_empty(struct uart_port *port)
+{
+ return (UART_GET_CSR(port) & ATMEL_US_TXEMPTY) ? TIOCSER_TEMT : 0;
+}
+
+/*
+ * Set state of the modem control output lines
+ */
+static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ unsigned int control = 0;
+ unsigned int mode = UART_GET_MR(port);
+ unsigned int rts_paused, rts_ready;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ /* override mode to RS485 if needed, otherwise keep the current mode */
+ if (port->rs485.flags & SER_RS485_ENABLED) {
+ UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
+ mode &= ~ATMEL_US_USMODE;
+ mode |= ATMEL_US_USMODE_RS485;
+ }
+
+ /* set the RTS line state according to the mode */
+ if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
+ /* force RTS line to high level */
+ rts_paused = ATMEL_US_RTSEN;
+
+ /* give the control of the RTS line back to the hardware */
+ rts_ready = ATMEL_US_RTSDIS;
+ } else {
+ /* force RTS line to high level */
+ rts_paused = ATMEL_US_RTSDIS;
+
+ /* force RTS line to low level */
+ rts_ready = ATMEL_US_RTSEN;
+ }
+
+ if (mctrl & TIOCM_RTS)
+ control |= rts_ready;
+ else
+ control |= rts_paused;
+
+ if (mctrl & TIOCM_DTR)
+ control |= ATMEL_US_DTREN;
+ else
+ control |= ATMEL_US_DTRDIS;
+
+ UART_PUT_CR(port, control);
+
+ mctrl_gpio_set(atmel_port->gpios, mctrl);
+
+ /* Local loopback mode? */
+ mode &= ~ATMEL_US_CHMODE;
+ if (mctrl & TIOCM_LOOP)
+ mode |= ATMEL_US_CHMODE_LOC_LOOP;
+ else
+ mode |= ATMEL_US_CHMODE_NORMAL;
+
+ UART_PUT_MR(port, mode);
+}
+
+/*
+ * Get state of the modem control input lines
+ */
+static u_int atmel_get_mctrl(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int ret = 0, status;
+
+ status = UART_GET_CSR(port);
+
+ /*
+ * The control signals are active low.
+ */
+ if (!(status & ATMEL_US_DCD))
+ ret |= TIOCM_CD;
+ if (!(status & ATMEL_US_CTS))
+ ret |= TIOCM_CTS;
+ if (!(status & ATMEL_US_DSR))
+ ret |= TIOCM_DSR;
+ if (!(status & ATMEL_US_RI))
+ ret |= TIOCM_RI;
+
+ return mctrl_gpio_get(atmel_port->gpios, &ret);
+}
+
+/*
+ * Stop transmitting.
+ */
+static void atmel_stop_tx(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_use_pdc_tx(port)) {
+ /* disable PDC transmit */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+ }
+ /* Disable interrupts */
+ UART_PUT_IDR(port, atmel_port->tx_done_mask);
+
+ if ((port->rs485.flags & SER_RS485_ENABLED) &&
+ !(port->rs485.flags & SER_RS485_RX_DURING_TX))
+ atmel_start_rx(port);
+}
+
+/*
+ * Start transmitting.
+ */
+static void atmel_start_tx(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_use_pdc_tx(port)) {
+ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
+ /* The transmitter is already running. Yes, we
+ really need this.*/
+ return;
+
+ if ((port->rs485.flags & SER_RS485_ENABLED) &&
+ !(port->rs485.flags & SER_RS485_RX_DURING_TX))
+ atmel_stop_rx(port);
+
+ /* re-enable PDC transmit */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+ }
+ /* Enable interrupts */
+ UART_PUT_IER(port, atmel_port->tx_done_mask);
+}
+
+/*
+ * start receiving - port is in process of being opened.
+ */
+static void atmel_start_rx(struct uart_port *port)
+{
+ UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */
+
+ UART_PUT_CR(port, ATMEL_US_RXEN);
+
+ if (atmel_use_pdc_rx(port)) {
+ /* enable PDC controller */
+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
+ port->read_status_mask);
+ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
+ } else {
+ UART_PUT_IER(port, ATMEL_US_RXRDY);
+ }
+}
+
+/*
+ * Stop receiving - port is in process of being closed.
+ */
+static void atmel_stop_rx(struct uart_port *port)
+{
+ UART_PUT_CR(port, ATMEL_US_RXDIS);
+
+ if (atmel_use_pdc_rx(port)) {
+ /* disable PDC receive */
+ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
+ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
+ port->read_status_mask);
+ } else {
+ UART_PUT_IDR(port, ATMEL_US_RXRDY);
+ }
+}
+
+/*
+ * Enable modem status interrupts
+ */
+static void atmel_enable_ms(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ uint32_t ier = 0;
+
+ /*
+ * Interrupt should not be enabled twice
+ */
+ if (atmel_port->ms_irq_enabled)
+ return;
+
+ atmel_port->ms_irq_enabled = true;
+
+ if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]);
+ else
+ ier |= ATMEL_US_CTSIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]);
+ else
+ ier |= ATMEL_US_DSRIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_RI]);
+ else
+ ier |= ATMEL_US_RIIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]);
+ else
+ ier |= ATMEL_US_DCDIC;
+
+ UART_PUT_IER(port, ier);
+}
+
+/*
+ * Disable modem status interrupts
+ */
+static void atmel_disable_ms(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ uint32_t idr = 0;
+
+ /*
+ * Interrupt should not be disabled twice
+ */
+ if (!atmel_port->ms_irq_enabled)
+ return;
+
+ atmel_port->ms_irq_enabled = false;
+
+ if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]);
+ else
+ idr |= ATMEL_US_CTSIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]);
+ else
+ idr |= ATMEL_US_DSRIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_RI]);
+ else
+ idr |= ATMEL_US_RIIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]);
+ else
+ idr |= ATMEL_US_DCDIC;
+
+ UART_PUT_IDR(port, idr);
+}
+
+/*
+ * Control the transmission of a break signal
+ */
+static void atmel_break_ctl(struct uart_port *port, int break_state)
+{
+ if (break_state != 0)
+ UART_PUT_CR(port, ATMEL_US_STTBRK); /* start break */
+ else
+ UART_PUT_CR(port, ATMEL_US_STPBRK); /* stop break */
+}
+
+/*
+ * Stores the incoming character in the ring buffer
+ */
+static void
+atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
+ unsigned int ch)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct circ_buf *ring = &atmel_port->rx_ring;
+ struct atmel_uart_char *c;
+
+ if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE))
+ /* Buffer overflow, ignore char */
+ return;
+
+ c = &((struct atmel_uart_char *)ring->buf)[ring->head];
+ c->status = status;
+ c->ch = ch;
+
+ /* Make sure the character is stored before we update head. */
+ smp_wmb();
+
+ ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
+}
+
+/*
+ * Deal with parity, framing and overrun errors.
+ */
+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
+{
+ /* clear error */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+
+ if (status & ATMEL_US_RXBRK) {
+ /* ignore side-effect */
+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
+ port->icount.brk++;
+ }
+ if (status & ATMEL_US_PARE)
+ port->icount.parity++;
+ if (status & ATMEL_US_FRAME)
+ port->icount.frame++;
+ if (status & ATMEL_US_OVRE)
+ port->icount.overrun++;
+}
+
+/*
+ * Characters received (called from interrupt handler)
+ */
+static void atmel_rx_chars(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int status, ch;
+
+ status = UART_GET_CSR(port);
+ while (status & ATMEL_US_RXRDY) {
+ ch = UART_GET_CHAR(port);
+
+ /*
+ * note that the error handling code is
+ * out of the main execution path
+ */
+ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
+ | ATMEL_US_OVRE | ATMEL_US_RXBRK)
+ || atmel_port->break_active)) {
+
+ /* clear error */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+
+ if (status & ATMEL_US_RXBRK
+ && !atmel_port->break_active) {
+ atmel_port->break_active = 1;
+ UART_PUT_IER(port, ATMEL_US_RXBRK);
+ } else {
+ /*
+ * This is either the end-of-break
+ * condition or we've received at
+ * least one character without RXBRK
+ * being set. In both cases, the next
+ * RXBRK will indicate start-of-break.
+ */
+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
+ status &= ~ATMEL_US_RXBRK;
+ atmel_port->break_active = 0;
+ }
+ }
+
+ atmel_buffer_rx_char(port, status, ch);
+ status = UART_GET_CSR(port);
+ }
+
+ tasklet_schedule(&atmel_port->tasklet);
+}
+
+/*
+ * Transmit characters (called from tasklet with TXRDY interrupt
+ * disabled)
+ */
+static void atmel_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) {
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ return;
+
+ while (UART_GET_CSR(port) & atmel_port->tx_done_mask) {
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (!uart_circ_empty(xmit))
+ /* Enable interrupts */
+ UART_PUT_IER(port, atmel_port->tx_done_mask);
+}
+
+static void atmel_complete_tx_dma(void *arg)
+{
+ struct atmel_uart_port *atmel_port = arg;
+ struct uart_port *port = &atmel_port->uart;
+ struct circ_buf *xmit = &port->state->xmit;
+ struct dma_chan *chan = atmel_port->chan_tx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (chan)
+ dmaengine_terminate_all(chan);
+ xmit->tail += sg_dma_len(&atmel_port->sg_tx);
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ port->icount.tx += sg_dma_len(&atmel_port->sg_tx);
+
+ spin_lock_irq(&atmel_port->lock_tx);
+ async_tx_ack(atmel_port->desc_tx);
+ atmel_port->cookie_tx = -EINVAL;
+ atmel_port->desc_tx = NULL;
+ spin_unlock_irq(&atmel_port->lock_tx);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ /*
+ * xmit is a circular buffer so, if we have just send data from
+ * xmit->tail to the end of xmit->buf, now we have to transmit the
+ * remaining data from the beginning of xmit->buf to xmit->head.
+ */
+ if (!uart_circ_empty(xmit))
+ tasklet_schedule(&atmel_port->tasklet);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void atmel_release_tx_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct dma_chan *chan = atmel_port->chan_tx;
+
+ if (chan) {
+ dmaengine_terminate_all(chan);
+ dma_release_channel(chan);
+ dma_unmap_sg(port->dev, &atmel_port->sg_tx, 1,
+ DMA_TO_DEVICE);
+ }
+
+ atmel_port->desc_tx = NULL;
+ atmel_port->chan_tx = NULL;
+ atmel_port->cookie_tx = -EINVAL;
+}
+
+/*
+ * Called from tasklet with TXRDY interrupt is disabled.
+ */
+static void atmel_tx_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct circ_buf *xmit = &port->state->xmit;
+ struct dma_chan *chan = atmel_port->chan_tx;
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sg = &atmel_port->sg_tx;
+
+ /* Make sure we have an idle channel */
+ if (atmel_port->desc_tx != NULL)
+ return;
+
+ if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
+ /*
+ * DMA is idle now.
+ * Port xmit buffer is already mapped,
+ * and it is one page... Just adjust
+ * offsets and lengths. Since it is a circular buffer,
+ * we have to transmit till the end, and then the rest.
+ * Take the port lock to get a
+ * consistent xmit buffer state.
+ */
+ sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
+ sg_dma_address(sg) = (sg_dma_address(sg) &
+ ~(UART_XMIT_SIZE - 1))
+ + sg->offset;
+ sg_dma_len(sg) = CIRC_CNT_TO_END(xmit->head,
+ xmit->tail,
+ UART_XMIT_SIZE);
+ BUG_ON(!sg_dma_len(sg));
+
+ desc = dmaengine_prep_slave_sg(chan,
+ sg,
+ 1,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+ if (!desc) {
+ dev_err(port->dev, "Failed to send via dma!\n");
+ return;
+ }
+
+ dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
+
+ atmel_port->desc_tx = desc;
+ desc->callback = atmel_complete_tx_dma;
+ desc->callback_param = atmel_port;
+ atmel_port->cookie_tx = dmaengine_submit(desc);
+
+ } else {
+ if (port->rs485.flags & SER_RS485_ENABLED) {
+ /* DMA done, stop TX, start RX for RS485 */
+ atmel_start_rx(port);
+ }
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static int atmel_prepare_tx_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ dma_cap_mask_t mask;
+ struct dma_slave_config config;
+ int ret, nent;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ atmel_port->chan_tx = dma_request_slave_channel(port->dev, "tx");
+ if (atmel_port->chan_tx == NULL)
+ goto chan_err;
+ dev_info(port->dev, "using %s for tx DMA transfers\n",
+ dma_chan_name(atmel_port->chan_tx));
+
+ spin_lock_init(&atmel_port->lock_tx);
+ sg_init_table(&atmel_port->sg_tx, 1);
+ /* UART circular tx buffer is an aligned page. */
+ BUG_ON(!PAGE_ALIGNED(port->state->xmit.buf));
+ sg_set_page(&atmel_port->sg_tx,
+ virt_to_page(port->state->xmit.buf),
+ UART_XMIT_SIZE,
+ (int)port->state->xmit.buf & ~PAGE_MASK);
+ nent = dma_map_sg(port->dev,
+ &atmel_port->sg_tx,
+ 1,
+ DMA_TO_DEVICE);
+
+ if (!nent) {
+ dev_dbg(port->dev, "need to release resource of dma\n");
+ goto chan_err;
+ } else {
+ dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
+ sg_dma_len(&atmel_port->sg_tx),
+ port->state->xmit.buf,
+ sg_dma_address(&atmel_port->sg_tx));
+ }
+
+ /* Configure the slave DMA */
+ memset(&config, 0, sizeof(config));
+ config.direction = DMA_MEM_TO_DEV;
+ config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ config.dst_addr = port->mapbase + ATMEL_US_THR;
+ config.dst_maxburst = 1;
+
+ ret = dmaengine_slave_config(atmel_port->chan_tx,
+ &config);
+ if (ret) {
+ dev_err(port->dev, "DMA tx slave configuration failed\n");
+ goto chan_err;
+ }
+
+ return 0;
+
+chan_err:
+ dev_err(port->dev, "TX channel not available, switch to pio\n");
+ atmel_port->use_dma_tx = 0;
+ if (atmel_port->chan_tx)
+ atmel_release_tx_dma(port);
+ return -EINVAL;
+}
+
+static void atmel_complete_rx_dma(void *arg)
+{
+ struct uart_port *port = arg;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ tasklet_schedule(&atmel_port->tasklet);
+}
+
+static void atmel_release_rx_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct dma_chan *chan = atmel_port->chan_rx;
+
+ if (chan) {
+ dmaengine_terminate_all(chan);
+ dma_release_channel(chan);
+ dma_unmap_sg(port->dev, &atmel_port->sg_rx, 1,
+ DMA_FROM_DEVICE);
+ }
+
+ atmel_port->desc_rx = NULL;
+ atmel_port->chan_rx = NULL;
+ atmel_port->cookie_rx = -EINVAL;
+}
+
+static void atmel_rx_from_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct tty_port *tport = &port->state->port;
+ struct circ_buf *ring = &atmel_port->rx_ring;
+ struct dma_chan *chan = atmel_port->chan_rx;
+ struct dma_tx_state state;
+ enum dma_status dmastat;
+ size_t count;
+
+
+ /* Reset the UART timeout early so that we don't miss one */
+ UART_PUT_CR(port, ATMEL_US_STTTO);
+ dmastat = dmaengine_tx_status(chan,
+ atmel_port->cookie_rx,
+ &state);
+ /* Restart a new tasklet if DMA status is error */
+ if (dmastat == DMA_ERROR) {
+ dev_dbg(port->dev, "Get residue error, restart tasklet\n");
+ UART_PUT_IER(port, ATMEL_US_TIMEOUT);
+ tasklet_schedule(&atmel_port->tasklet);
+ return;
+ }
+
+ /* CPU claims ownership of RX DMA buffer */
+ dma_sync_sg_for_cpu(port->dev,
+ &atmel_port->sg_rx,
+ 1,
+ DMA_FROM_DEVICE);
+
+ /*
+ * ring->head points to the end of data already written by the DMA.
+ * ring->tail points to the beginning of data to be read by the
+ * framework.
+ * The current transfer size should not be larger than the dma buffer
+ * length.
+ */
+ ring->head = sg_dma_len(&atmel_port->sg_rx) - state.residue;
+ BUG_ON(ring->head > sg_dma_len(&atmel_port->sg_rx));
+ /*
+ * At this point ring->head may point to the first byte right after the
+ * last byte of the dma buffer:
+ * 0 <= ring->head <= sg_dma_len(&atmel_port->sg_rx)
+ *
+ * However ring->tail must always points inside the dma buffer:
+ * 0 <= ring->tail <= sg_dma_len(&atmel_port->sg_rx) - 1
+ *
+ * Since we use a ring buffer, we have to handle the case
+ * where head is lower than tail. In such a case, we first read from
+ * tail to the end of the buffer then reset tail.
+ */
+ if (ring->head < ring->tail) {
+ count = sg_dma_len(&atmel_port->sg_rx) - ring->tail;
+
+ tty_insert_flip_string(tport, ring->buf + ring->tail, count);
+ ring->tail = 0;
+ port->icount.rx += count;
+ }
+
+ /* Finally we read data from tail to head */
+ if (ring->tail < ring->head) {
+ count = ring->head - ring->tail;
+
+ tty_insert_flip_string(tport, ring->buf + ring->tail, count);
+ /* Wrap ring->head if needed */
+ if (ring->head >= sg_dma_len(&atmel_port->sg_rx))
+ ring->head = 0;
+ ring->tail = ring->head;
+ port->icount.rx += count;
+ }
+
+ /* USART retreives ownership of RX DMA buffer */
+ dma_sync_sg_for_device(port->dev,
+ &atmel_port->sg_rx,
+ 1,
+ DMA_FROM_DEVICE);
+
+ /*
+ * Drop the lock here since it might end up calling
+ * uart_start(), which takes the lock.
+ */
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(tport);
+ spin_lock(&port->lock);
+
+ UART_PUT_IER(port, ATMEL_US_TIMEOUT);
+}
+
+static int atmel_prepare_rx_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct dma_async_tx_descriptor *desc;
+ dma_cap_mask_t mask;
+ struct dma_slave_config config;
+ struct circ_buf *ring;
+ int ret, nent;
+
+ ring = &atmel_port->rx_ring;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_CYCLIC, mask);
+
+ atmel_port->chan_rx = dma_request_slave_channel(port->dev, "rx");
+ if (atmel_port->chan_rx == NULL)
+ goto chan_err;
+ dev_info(port->dev, "using %s for rx DMA transfers\n",
+ dma_chan_name(atmel_port->chan_rx));
+
+ spin_lock_init(&atmel_port->lock_rx);
+ sg_init_table(&atmel_port->sg_rx, 1);
+ /* UART circular rx buffer is an aligned page. */
+ BUG_ON(!PAGE_ALIGNED(ring->buf));
+ sg_set_page(&atmel_port->sg_rx,
+ virt_to_page(ring->buf),
+ sizeof(struct atmel_uart_char) * ATMEL_SERIAL_RINGSIZE,
+ (int)ring->buf & ~PAGE_MASK);
+ nent = dma_map_sg(port->dev,
+ &atmel_port->sg_rx,
+ 1,
+ DMA_FROM_DEVICE);
+
+ if (!nent) {
+ dev_dbg(port->dev, "need to release resource of dma\n");
+ goto chan_err;
+ } else {
+ dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
+ sg_dma_len(&atmel_port->sg_rx),
+ ring->buf,
+ sg_dma_address(&atmel_port->sg_rx));
+ }
+
+ /* Configure the slave DMA */
+ memset(&config, 0, sizeof(config));
+ config.direction = DMA_DEV_TO_MEM;
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ config.src_addr = port->mapbase + ATMEL_US_RHR;
+ config.src_maxburst = 1;
+
+ ret = dmaengine_slave_config(atmel_port->chan_rx,
+ &config);
+ if (ret) {
+ dev_err(port->dev, "DMA rx slave configuration failed\n");
+ goto chan_err;
+ }
+ /*
+ * Prepare a cyclic dma transfer, assign 2 descriptors,
+ * each one is half ring buffer size
+ */
+ desc = dmaengine_prep_dma_cyclic(atmel_port->chan_rx,
+ sg_dma_address(&atmel_port->sg_rx),
+ sg_dma_len(&atmel_port->sg_rx),
+ sg_dma_len(&atmel_port->sg_rx)/2,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
+ desc->callback = atmel_complete_rx_dma;
+ desc->callback_param = port;
+ atmel_port->desc_rx = desc;
+ atmel_port->cookie_rx = dmaengine_submit(desc);
+
+ return 0;
+
+chan_err:
+ dev_err(port->dev, "RX channel not available, switch to pio\n");
+ atmel_port->use_dma_rx = 0;
+ if (atmel_port->chan_rx)
+ atmel_release_rx_dma(port);
+ return -EINVAL;
+}
+
+static void atmel_uart_timer_callback(unsigned long data)
+{
+ struct uart_port *port = (void *)data;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ tasklet_schedule(&atmel_port->tasklet);
+ mod_timer(&atmel_port->uart_timer, jiffies + uart_poll_timeout(port));
+}
+
+/*
+ * receive interrupt handler.
+ */
+static void
+atmel_handle_receive(struct uart_port *port, unsigned int pending)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_use_pdc_rx(port)) {
+ /*
+ * PDC receive. Just schedule the tasklet and let it
+ * figure out the details.
+ *
+ * TODO: We're not handling error flags correctly at
+ * the moment.
+ */
+ if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) {
+ UART_PUT_IDR(port, (ATMEL_US_ENDRX
+ | ATMEL_US_TIMEOUT));
+ tasklet_schedule(&atmel_port->tasklet);
+ }
+
+ if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE |
+ ATMEL_US_FRAME | ATMEL_US_PARE))
+ atmel_pdc_rxerr(port, pending);
+ }
+
+ if (atmel_use_dma_rx(port)) {
+ if (pending & ATMEL_US_TIMEOUT) {
+ UART_PUT_IDR(port, ATMEL_US_TIMEOUT);
+ tasklet_schedule(&atmel_port->tasklet);
+ }
+ }
+
+ /* Interrupt receive */
+ if (pending & ATMEL_US_RXRDY)
+ atmel_rx_chars(port);
+ else if (pending & ATMEL_US_RXBRK) {
+ /*
+ * End of break detected. If it came along with a
+ * character, atmel_rx_chars will handle it.
+ */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
+ atmel_port->break_active = 0;
+ }
+}
+
+/*
+ * transmit interrupt handler. (Transmit is IRQF_NODELAY safe)
+ */
+static void
+atmel_handle_transmit(struct uart_port *port, unsigned int pending)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (pending & atmel_port->tx_done_mask) {
+ /* Either PDC or interrupt transmission */
+ UART_PUT_IDR(port, atmel_port->tx_done_mask);
+ tasklet_schedule(&atmel_port->tasklet);
+ }
+}
+
+/*
+ * status flags interrupt handler.
+ */
+static void
+atmel_handle_status(struct uart_port *port, unsigned int pending,
+ unsigned int status)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
+ | ATMEL_US_CTSIC)) {
+ atmel_port->irq_status = status;
+ tasklet_schedule(&atmel_port->tasklet);
+ }
+}
+
+/*
+ * Interrupt handler
+ */
+static irqreturn_t atmel_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int status, pending, mask, pass_counter = 0;
+ bool gpio_handled = false;
+
+ spin_lock(&atmel_port->lock_suspended);
+
+ do {
+ status = atmel_get_lines_status(port);
+ mask = UART_GET_IMR(port);
+ pending = status & mask;
+ if (!gpio_handled) {
+ /*
+ * Dealing with GPIO interrupt
+ */
+ if (irq == atmel_port->gpio_irq[UART_GPIO_CTS])
+ pending |= ATMEL_US_CTSIC;
+
+ if (irq == atmel_port->gpio_irq[UART_GPIO_DSR])
+ pending |= ATMEL_US_DSRIC;
+
+ if (irq == atmel_port->gpio_irq[UART_GPIO_RI])
+ pending |= ATMEL_US_RIIC;
+
+ if (irq == atmel_port->gpio_irq[UART_GPIO_DCD])
+ pending |= ATMEL_US_DCDIC;
+
+ gpio_handled = true;
+ }
+ if (!pending)
+ break;
+
+ if (atmel_port->suspended) {
+ atmel_port->pending |= pending;
+ atmel_port->pending_status = status;
+ UART_PUT_IDR(port, mask);
+ pm_system_wakeup();
+ break;
+ }
+
+ atmel_handle_receive(port, pending);
+ atmel_handle_status(port, pending, status);
+ atmel_handle_transmit(port, pending);
+ } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT);
+
+ spin_unlock(&atmel_port->lock_suspended);
+
+ return pass_counter ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void atmel_release_tx_pdc(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+
+ dma_unmap_single(port->dev,
+ pdc->dma_addr,
+ pdc->dma_size,
+ DMA_TO_DEVICE);
+}
+
+/*
+ * Called from tasklet with ENDTX and TXBUFE interrupts disabled.
+ */
+static void atmel_tx_pdc(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct circ_buf *xmit = &port->state->xmit;
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+ int count;
+
+ /* nothing left to transmit? */
+ if (UART_GET_TCR(port))
+ return;
+
+ xmit->tail += pdc->ofs;
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ port->icount.tx += pdc->ofs;
+ pdc->ofs = 0;
+
+ /* more to transmit - setup next transfer */
+
+ /* disable PDC transmit */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
+ if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
+ dma_sync_single_for_device(port->dev,
+ pdc->dma_addr,
+ pdc->dma_size,
+ DMA_TO_DEVICE);
+
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ pdc->ofs = count;
+
+ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
+ UART_PUT_TCR(port, count);
+ /* re-enable PDC transmit */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+ /* Enable interrupts */
+ UART_PUT_IER(port, atmel_port->tx_done_mask);
+ } else {
+ if ((port->rs485.flags & SER_RS485_ENABLED) &&
+ !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
+ /* DMA done, stop TX, start RX for RS485 */
+ atmel_start_rx(port);
+ }
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static int atmel_prepare_tx_pdc(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ pdc->buf = xmit->buf;
+ pdc->dma_addr = dma_map_single(port->dev,
+ pdc->buf,
+ UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ pdc->dma_size = UART_XMIT_SIZE;
+ pdc->ofs = 0;
+
+ return 0;
+}
+
+static void atmel_rx_from_ring(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct circ_buf *ring = &atmel_port->rx_ring;
+ unsigned int flg;
+ unsigned int status;
+
+ while (ring->head != ring->tail) {
+ struct atmel_uart_char c;
+
+ /* Make sure c is loaded after head. */
+ smp_rmb();
+
+ c = ((struct atmel_uart_char *)ring->buf)[ring->tail];
+
+ ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
+
+ port->icount.rx++;
+ status = c.status;
+ flg = TTY_NORMAL;
+
+ /*
+ * note that the error handling code is
+ * out of the main execution path
+ */
+ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
+ | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
+ if (status & ATMEL_US_RXBRK) {
+ /* ignore side-effect */
+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
+
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ }
+ if (status & ATMEL_US_PARE)
+ port->icount.parity++;
+ if (status & ATMEL_US_FRAME)
+ port->icount.frame++;
+ if (status & ATMEL_US_OVRE)
+ port->icount.overrun++;
+
+ status &= port->read_status_mask;
+
+ if (status & ATMEL_US_RXBRK)
+ flg = TTY_BREAK;
+ else if (status & ATMEL_US_PARE)
+ flg = TTY_PARITY;
+ else if (status & ATMEL_US_FRAME)
+ flg = TTY_FRAME;
+ }
+
+
+ if (uart_handle_sysrq_char(port, c.ch))
+ continue;
+
+ uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg);
+ }
+
+ /*
+ * Drop the lock here since it might end up calling
+ * uart_start(), which takes the lock.
+ */
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(&port->state->port);
+ spin_lock(&port->lock);
+}
+
+static void atmel_release_rx_pdc(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
+
+ dma_unmap_single(port->dev,
+ pdc->dma_addr,
+ pdc->dma_size,
+ DMA_FROM_DEVICE);
+ kfree(pdc->buf);
+ }
+}
+
+static void atmel_rx_from_pdc(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct tty_port *tport = &port->state->port;
+ struct atmel_dma_buffer *pdc;
+ int rx_idx = atmel_port->pdc_rx_idx;
+ unsigned int head;
+ unsigned int tail;
+ unsigned int count;
+
+ do {
+ /* Reset the UART timeout early so that we don't miss one */
+ UART_PUT_CR(port, ATMEL_US_STTTO);
+
+ pdc = &atmel_port->pdc_rx[rx_idx];
+ head = UART_GET_RPR(port) - pdc->dma_addr;
+ tail = pdc->ofs;
+
+ /* If the PDC has switched buffers, RPR won't contain
+ * any address within the current buffer. Since head
+ * is unsigned, we just need a one-way comparison to
+ * find out.
+ *
+ * In this case, we just need to consume the entire
+ * buffer and resubmit it for DMA. This will clear the
+ * ENDRX bit as well, so that we can safely re-enable
+ * all interrupts below.
+ */
+ head = min(head, pdc->dma_size);
+
+ if (likely(head != tail)) {
+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr,
+ pdc->dma_size, DMA_FROM_DEVICE);
+
+ /*
+ * head will only wrap around when we recycle
+ * the DMA buffer, and when that happens, we
+ * explicitly set tail to 0. So head will
+ * always be greater than tail.
+ */
+ count = head - tail;
+
+ tty_insert_flip_string(tport, pdc->buf + pdc->ofs,
+ count);
+
+ dma_sync_single_for_device(port->dev, pdc->dma_addr,
+ pdc->dma_size, DMA_FROM_DEVICE);
+
+ port->icount.rx += count;
+ pdc->ofs = head;
+ }
+
+ /*
+ * If the current buffer is full, we need to check if
+ * the next one contains any additional data.
+ */
+ if (head >= pdc->dma_size) {
+ pdc->ofs = 0;
+ UART_PUT_RNPR(port, pdc->dma_addr);
+ UART_PUT_RNCR(port, pdc->dma_size);
+
+ rx_idx = !rx_idx;
+ atmel_port->pdc_rx_idx = rx_idx;
+ }
+ } while (head >= pdc->dma_size);
+
+ /*
+ * Drop the lock here since it might end up calling
+ * uart_start(), which takes the lock.
+ */
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(tport);
+ spin_lock(&port->lock);
+
+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+}
+
+static int atmel_prepare_rx_pdc(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
+
+ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
+ if (pdc->buf == NULL) {
+ if (i != 0) {
+ dma_unmap_single(port->dev,
+ atmel_port->pdc_rx[0].dma_addr,
+ PDC_BUFFER_SIZE,
+ DMA_FROM_DEVICE);
+ kfree(atmel_port->pdc_rx[0].buf);
+ }
+ atmel_port->use_pdc_rx = 0;
+ return -ENOMEM;
+ }
+ pdc->dma_addr = dma_map_single(port->dev,
+ pdc->buf,
+ PDC_BUFFER_SIZE,
+ DMA_FROM_DEVICE);
+ pdc->dma_size = PDC_BUFFER_SIZE;
+ pdc->ofs = 0;
+ }
+
+ atmel_port->pdc_rx_idx = 0;
+
+ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
+ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
+
+ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
+ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
+
+ return 0;
+}
+
+/*
+ * tasklet handling tty stuff outside the interrupt handler.
+ */
+static void atmel_tasklet_func(unsigned long data)
+{
+ struct uart_port *port = (struct uart_port *)data;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int status;
+ unsigned int status_change;
+
+ /* The interrupt handler does not take the lock */
+ spin_lock(&port->lock);
+
+ atmel_port->schedule_tx(port);
+
+ status = atmel_port->irq_status;
+ status_change = status ^ atmel_port->irq_status_prev;
+
+ if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
+ | ATMEL_US_DCD | ATMEL_US_CTS)) {
+ /* TODO: All reads to CSR will clear these interrupts! */
+ if (status_change & ATMEL_US_RI)
+ port->icount.rng++;
+ if (status_change & ATMEL_US_DSR)
+ port->icount.dsr++;
+ if (status_change & ATMEL_US_DCD)
+ uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
+ if (status_change & ATMEL_US_CTS)
+ uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
+
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
+
+ atmel_port->irq_status_prev = status;
+ }
+
+ atmel_port->schedule_rx(port);
+
+ spin_unlock(&port->lock);
+}
+
+static void atmel_init_property(struct atmel_uart_port *atmel_port,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
+
+ if (np) {
+ /* DMA/PDC usage specification */
+ if (of_get_property(np, "atmel,use-dma-rx", NULL)) {
+ if (of_get_property(np, "dmas", NULL)) {
+ atmel_port->use_dma_rx = true;
+ atmel_port->use_pdc_rx = false;
+ } else {
+ atmel_port->use_dma_rx = false;
+ atmel_port->use_pdc_rx = true;
+ }
+ } else {
+ atmel_port->use_dma_rx = false;
+ atmel_port->use_pdc_rx = false;
+ }
+
+ if (of_get_property(np, "atmel,use-dma-tx", NULL)) {
+ if (of_get_property(np, "dmas", NULL)) {
+ atmel_port->use_dma_tx = true;
+ atmel_port->use_pdc_tx = false;
+ } else {
+ atmel_port->use_dma_tx = false;
+ atmel_port->use_pdc_tx = true;
+ }
+ } else {
+ atmel_port->use_dma_tx = false;
+ atmel_port->use_pdc_tx = false;
+ }
+
+ } else {
+ atmel_port->use_pdc_rx = pdata->use_dma_rx;
+ atmel_port->use_pdc_tx = pdata->use_dma_tx;
+ atmel_port->use_dma_rx = false;
+ atmel_port->use_dma_tx = false;
+ }
+
+}
+
+static void atmel_init_rs485(struct uart_port *port,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
+
+ if (np) {
+ u32 rs485_delay[2];
+ /* rs485 properties */
+ if (of_property_read_u32_array(np, "rs485-rts-delay",
+ rs485_delay, 2) == 0) {
+ struct serial_rs485 *rs485conf = &port->rs485;
+
+ rs485conf->delay_rts_before_send = rs485_delay[0];
+ rs485conf->delay_rts_after_send = rs485_delay[1];
+ rs485conf->flags = 0;
+
+ if (of_get_property(np, "rs485-rx-during-tx", NULL))
+ rs485conf->flags |= SER_RS485_RX_DURING_TX;
+
+ if (of_get_property(np, "linux,rs485-enabled-at-boot-time",
+ NULL))
+ rs485conf->flags |= SER_RS485_ENABLED;
+ }
+ } else {
+ port->rs485 = pdata->rs485;
+ }
+
+}
+
+static void atmel_set_ops(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_use_dma_rx(port)) {
+ atmel_port->prepare_rx = &atmel_prepare_rx_dma;
+ atmel_port->schedule_rx = &atmel_rx_from_dma;
+ atmel_port->release_rx = &atmel_release_rx_dma;
+ } else if (atmel_use_pdc_rx(port)) {
+ atmel_port->prepare_rx = &atmel_prepare_rx_pdc;
+ atmel_port->schedule_rx = &atmel_rx_from_pdc;
+ atmel_port->release_rx = &atmel_release_rx_pdc;
+ } else {
+ atmel_port->prepare_rx = NULL;
+ atmel_port->schedule_rx = &atmel_rx_from_ring;
+ atmel_port->release_rx = NULL;
+ }
+
+ if (atmel_use_dma_tx(port)) {
+ atmel_port->prepare_tx = &atmel_prepare_tx_dma;
+ atmel_port->schedule_tx = &atmel_tx_dma;
+ atmel_port->release_tx = &atmel_release_tx_dma;
+ } else if (atmel_use_pdc_tx(port)) {
+ atmel_port->prepare_tx = &atmel_prepare_tx_pdc;
+ atmel_port->schedule_tx = &atmel_tx_pdc;
+ atmel_port->release_tx = &atmel_release_tx_pdc;
+ } else {
+ atmel_port->prepare_tx = NULL;
+ atmel_port->schedule_tx = &atmel_tx_chars;
+ atmel_port->release_tx = NULL;
+ }
+}
+
+/*
+ * Get ip name usart or uart
+ */
+static void atmel_get_ip_name(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ int name = UART_GET_IP_NAME(port);
+ u32 version;
+ int usart, uart;
+ /* usart and uart ascii */
+ usart = 0x55534152;
+ uart = 0x44424755;
+
+ atmel_port->is_usart = false;
+
+ if (name == usart) {
+ dev_dbg(port->dev, "This is usart\n");
+ atmel_port->is_usart = true;
+ } else if (name == uart) {
+ dev_dbg(port->dev, "This is uart\n");
+ atmel_port->is_usart = false;
+ } else {
+ /* fallback for older SoCs: use version field */
+ version = UART_GET_IP_VERSION(port);
+ switch (version) {
+ case 0x302:
+ case 0x10213:
+ dev_dbg(port->dev, "This version is usart\n");
+ atmel_port->is_usart = true;
+ break;
+ case 0x203:
+ case 0x10202:
+ dev_dbg(port->dev, "This version is uart\n");
+ atmel_port->is_usart = false;
+ break;
+ default:
+ dev_err(port->dev, "Not supported ip name nor version, set to uart\n");
+ }
+ }
+}
+
+static void atmel_free_gpio_irq(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ enum mctrl_gpio_idx i;
+
+ for (i = 0; i < UART_GPIO_MAX; i++)
+ if (atmel_port->gpio_irq[i] >= 0)
+ free_irq(atmel_port->gpio_irq[i], port);
+}
+
+static int atmel_request_gpio_irq(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ int *irq = atmel_port->gpio_irq;
+ enum mctrl_gpio_idx i;
+ int err = 0;
+
+ for (i = 0; (i < UART_GPIO_MAX) && !err; i++) {
+ if (irq[i] < 0)
+ continue;
+
+ irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
+ err = request_irq(irq[i], atmel_interrupt, IRQ_TYPE_EDGE_BOTH,
+ "atmel_serial", port);
+ if (err)
+ dev_err(port->dev, "atmel_startup - Can't get %d irq\n",
+ irq[i]);
+ }
+
+ /*
+ * If something went wrong, rollback.
+ */
+ while (err && (--i >= 0))
+ if (irq[i] >= 0)
+ free_irq(irq[i], port);
+
+ return err;
+}
+
+/*
+ * Perform initialization and enable port for reception
+ */
+static int atmel_startup(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct tty_struct *tty = port->state->port.tty;
+ int retval;
+
+ /*
+ * Ensure that no interrupts are enabled otherwise when
+ * request_irq() is called we could get stuck trying to
+ * handle an unexpected interrupt
+ */
+ UART_PUT_IDR(port, -1);
+ atmel_port->ms_irq_enabled = false;
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(port->irq, atmel_interrupt,
+ IRQF_SHARED | IRQF_COND_SUSPEND,
+ tty ? tty->name : "atmel_serial", port);
+ if (retval) {
+ dev_err(port->dev, "atmel_startup - Can't get irq\n");
+ return retval;
+ }
+
+ /*
+ * Get the GPIO lines IRQ
+ */
+ retval = atmel_request_gpio_irq(port);
+ if (retval)
+ goto free_irq;
+
+ tasklet_enable(&atmel_port->tasklet);
+
+ /*
+ * Initialize DMA (if necessary)
+ */
+ atmel_init_property(atmel_port, pdev);
+ atmel_set_ops(port);
+
+ if (atmel_port->prepare_rx) {
+ retval = atmel_port->prepare_rx(port);
+ if (retval < 0)
+ atmel_set_ops(port);
+ }
+
+ if (atmel_port->prepare_tx) {
+ retval = atmel_port->prepare_tx(port);
+ if (retval < 0)
+ atmel_set_ops(port);
+ }
+
+ /* Save current CSR for comparison in atmel_tasklet_func() */
+ atmel_port->irq_status_prev = atmel_get_lines_status(port);
+ atmel_port->irq_status = atmel_port->irq_status_prev;
+
+ /*
+ * Finally, enable the serial port
+ */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ /* enable xmit & rcvr */
+ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
+
+ setup_timer(&atmel_port->uart_timer,
+ atmel_uart_timer_callback,
+ (unsigned long)port);
+
+ if (atmel_use_pdc_rx(port)) {
+ /* set UART timeout */
+ if (!atmel_port->is_usart) {
+ mod_timer(&atmel_port->uart_timer,
+ jiffies + uart_poll_timeout(port));
+ /* set USART timeout */
+ } else {
+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
+ UART_PUT_CR(port, ATMEL_US_STTTO);
+
+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+ }
+ /* enable PDC controller */
+ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
+ } else if (atmel_use_dma_rx(port)) {
+ /* set UART timeout */
+ if (!atmel_port->is_usart) {
+ mod_timer(&atmel_port->uart_timer,
+ jiffies + uart_poll_timeout(port));
+ /* set USART timeout */
+ } else {
+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
+ UART_PUT_CR(port, ATMEL_US_STTTO);
+
+ UART_PUT_IER(port, ATMEL_US_TIMEOUT);
+ }
+ } else {
+ /* enable receive only */
+ UART_PUT_IER(port, ATMEL_US_RXRDY);
+ }
+
+ return 0;
+
+free_irq:
+ free_irq(port->irq, port);
+
+ return retval;
+}
+
+/*
+ * Flush any TX data submitted for DMA. Called when the TX circular
+ * buffer is reset.
+ */
+static void atmel_flush_buffer(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_use_pdc_tx(port)) {
+ UART_PUT_TCR(port, 0);
+ atmel_port->pdc_tx.ofs = 0;
+ }
+}
+
+/*
+ * Disable the port
+ */
+static void atmel_shutdown(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ /*
+ * Prevent any tasklets being scheduled during
+ * cleanup
+ */
+ del_timer_sync(&atmel_port->uart_timer);
+
+ /*
+ * Clear out any scheduled tasklets before
+ * we destroy the buffers
+ */
+ tasklet_disable(&atmel_port->tasklet);
+ tasklet_kill(&atmel_port->tasklet);
+
+ /*
+ * Ensure everything is stopped and
+ * disable all interrupts, port and break condition.
+ */
+ atmel_stop_rx(port);
+ atmel_stop_tx(port);
+
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+ UART_PUT_IDR(port, -1);
+
+
+ /*
+ * Shut-down the DMA.
+ */
+ if (atmel_port->release_rx)
+ atmel_port->release_rx(port);
+ if (atmel_port->release_tx)
+ atmel_port->release_tx(port);
+
+ /*
+ * Reset ring buffer pointers
+ */
+ atmel_port->rx_ring.head = 0;
+ atmel_port->rx_ring.tail = 0;
+
+ /*
+ * Free the interrupts
+ */
+ free_irq(port->irq, port);
+ atmel_free_gpio_irq(port);
+
+ atmel_port->ms_irq_enabled = false;
+
+ atmel_flush_buffer(port);
+}
+
+/*
+ * Power / Clock management.
+ */
+static void atmel_serial_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ switch (state) {
+ case 0:
+ /*
+ * Enable the peripheral clock for this serial port.
+ * This is called on uart_open() or a resume event.
+ */
+ clk_prepare_enable(atmel_port->clk);
+
+ /* re-enable interrupts if we disabled some on suspend */
+ UART_PUT_IER(port, atmel_port->backup_imr);
+ break;
+ case 3:
+ /* Back up the interrupt mask and disable all interrupts */
+ atmel_port->backup_imr = UART_GET_IMR(port);
+ UART_PUT_IDR(port, -1);
+
+ /*
+ * Disable the peripheral clock for this serial port.
+ * This is called on uart_close() or a suspend event.
+ */
+ clk_disable_unprepare(atmel_port->clk);
+ break;
+ default:
+ dev_err(port->dev, "atmel_serial: unknown pm %d\n", state);
+ }
+}
+
+/*
+ * Change the port parameters
+ */
+static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned int old_mode, mode, imr, quot, baud;
+
+ /* save the current mode register */
+ mode = old_mode = UART_GET_MR(port);
+
+ /* reset the mode, clock divisor, parity, stop bits and data size */
+ mode &= ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP |
+ ATMEL_US_PAR | ATMEL_US_USMODE);
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+ quot = uart_get_divisor(port, baud);
+
+ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
+ quot /= 8;
+ mode |= ATMEL_US_USCLKS_MCK_DIV8;
+ }
+
+ /* byte size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ mode |= ATMEL_US_CHRL_5;
+ break;
+ case CS6:
+ mode |= ATMEL_US_CHRL_6;
+ break;
+ case CS7:
+ mode |= ATMEL_US_CHRL_7;
+ break;
+ default:
+ mode |= ATMEL_US_CHRL_8;
+ break;
+ }
+
+ /* stop bits */
+ if (termios->c_cflag & CSTOPB)
+ mode |= ATMEL_US_NBSTOP_2;
+
+ /* parity */
+ if (termios->c_cflag & PARENB) {
+ /* Mark or Space parity */
+ if (termios->c_cflag & CMSPAR) {
+ if (termios->c_cflag & PARODD)
+ mode |= ATMEL_US_PAR_MARK;
+ else
+ mode |= ATMEL_US_PAR_SPACE;
+ } else if (termios->c_cflag & PARODD)
+ mode |= ATMEL_US_PAR_ODD;
+ else
+ mode |= ATMEL_US_PAR_EVEN;
+ } else
+ mode |= ATMEL_US_PAR_NONE;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ port->read_status_mask = ATMEL_US_OVRE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+ port->read_status_mask |= ATMEL_US_RXBRK;
+
+ if (atmel_use_pdc_rx(port))
+ /* need to enable error interrupts */
+ UART_PUT_IER(port, port->read_status_mask);
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= ATMEL_US_RXBRK;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= ATMEL_US_OVRE;
+ }
+ /* TODO: Ignore all characters if CREAD is set.*/
+
+ /* update the per-port timeout */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /*
+ * save/disable interrupts. The tty layer will ensure that the
+ * transmitter is empty if requested by the caller, so there's
+ * no need to wait for it here.
+ */
+ imr = UART_GET_IMR(port);
+ UART_PUT_IDR(port, -1);
+
+ /* disable receiver and transmitter */
+ UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
+
+ /* mode */
+ if (port->rs485.flags & SER_RS485_ENABLED) {
+ UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
+ mode |= ATMEL_US_USMODE_RS485;
+ } else if (termios->c_cflag & CRTSCTS) {
+ /* RS232 with hardware handshake (RTS/CTS) */
+ mode |= ATMEL_US_USMODE_HWHS;
+ } else {
+ /* RS232 without hadware handshake */
+ mode |= ATMEL_US_USMODE_NORMAL;
+ }
+
+ /* set the mode, clock divisor, parity, stop bits and data size */
+ UART_PUT_MR(port, mode);
+
+ /*
+ * when switching the mode, set the RTS line state according to the
+ * new mode, otherwise keep the former state
+ */
+ if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
+ unsigned int rts_state;
+
+ if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
+ /* let the hardware control the RTS line */
+ rts_state = ATMEL_US_RTSDIS;
+ } else {
+ /* force RTS line to low level */
+ rts_state = ATMEL_US_RTSEN;
+ }
+
+ UART_PUT_CR(port, rts_state);
+ }
+
+ /* set the baud rate */
+ UART_PUT_BRGR(port, quot);
+ UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
+
+ /* restore interrupts */
+ UART_PUT_IER(port, imr);
+
+ /* CTS flow-control and modem-status interrupts */
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ atmel_enable_ms(port);
+ else
+ atmel_disable_ms(port);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void atmel_set_ldisc(struct uart_port *port, struct ktermios *termios)
+{
+ if (termios->c_line == N_PPS) {
+ port->flags |= UPF_HARDPPS_CD;
+ spin_lock_irq(&port->lock);
+ atmel_enable_ms(port);
+ spin_unlock_irq(&port->lock);
+ } else {
+ port->flags &= ~UPF_HARDPPS_CD;
+ if (!UART_ENABLE_MS(port, termios->c_cflag)) {
+ spin_lock_irq(&port->lock);
+ atmel_disable_ms(port);
+ spin_unlock_irq(&port->lock);
+ }
+ }
+}
+
+/*
+ * Return string describing the specified port
+ */
+static const char *atmel_type(struct uart_port *port)
+{
+ return (port->type == PORT_ATMEL) ? "ATMEL_SERIAL" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'.
+ */
+static void atmel_release_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ int size = pdev->resource[0].end - pdev->resource[0].start + 1;
+
+ release_mem_region(port->mapbase, size);
+
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+}
+
+/*
+ * Request the memory region(s) being used by 'port'.
+ */
+static int atmel_request_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ int size = pdev->resource[0].end - pdev->resource[0].start + 1;
+
+ if (!request_mem_region(port->mapbase, size, "atmel_serial"))
+ return -EBUSY;
+
+ if (port->flags & UPF_IOREMAP) {
+ port->membase = ioremap(port->mapbase, size);
+ if (port->membase == NULL) {
+ release_mem_region(port->mapbase, size);
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void atmel_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_ATMEL;
+ atmel_request_port(port);
+ }
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_ATMEL)
+ ret = -EINVAL;
+ if (port->irq != ser->irq)
+ ret = -EINVAL;
+ if (ser->io_type != SERIAL_IO_MEM)
+ ret = -EINVAL;
+ if (port->uartclk / 16 != ser->baud_base)
+ ret = -EINVAL;
+ if ((void *)port->mapbase != ser->iomem_base)
+ ret = -EINVAL;
+ if (port->iobase != ser->port)
+ ret = -EINVAL;
+ if (ser->hub6 != 0)
+ ret = -EINVAL;
+ return ret;
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int atmel_poll_get_char(struct uart_port *port)
+{
+ while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY))
+ cpu_relax();
+
+ return UART_GET_CHAR(port);
+}
+
+static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
+{
+ while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
+ cpu_relax();
+
+ UART_PUT_CHAR(port, ch);
+}
+#endif
+
+static struct uart_ops atmel_pops = {
+ .tx_empty = atmel_tx_empty,
+ .set_mctrl = atmel_set_mctrl,
+ .get_mctrl = atmel_get_mctrl,
+ .stop_tx = atmel_stop_tx,
+ .start_tx = atmel_start_tx,
+ .stop_rx = atmel_stop_rx,
+ .enable_ms = atmel_enable_ms,
+ .break_ctl = atmel_break_ctl,
+ .startup = atmel_startup,
+ .shutdown = atmel_shutdown,
+ .flush_buffer = atmel_flush_buffer,
+ .set_termios = atmel_set_termios,
+ .set_ldisc = atmel_set_ldisc,
+ .type = atmel_type,
+ .release_port = atmel_release_port,
+ .request_port = atmel_request_port,
+ .config_port = atmel_config_port,
+ .verify_port = atmel_verify_port,
+ .pm = atmel_serial_pm,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = atmel_poll_get_char,
+ .poll_put_char = atmel_poll_put_char,
+#endif
+};
+
+/*
+ * Configure the port from the platform device resource info.
+ */
+static int atmel_init_port(struct atmel_uart_port *atmel_port,
+ struct platform_device *pdev)
+{
+ int ret;
+ struct uart_port *port = &atmel_port->uart;
+ struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
+
+ atmel_init_property(atmel_port, pdev);
+ atmel_set_ops(port);
+
+ atmel_init_rs485(port, pdev);
+
+ port->iotype = UPIO_MEM;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->ops = &atmel_pops;
+ port->fifosize = 1;
+ port->dev = &pdev->dev;
+ port->mapbase = pdev->resource[0].start;
+ port->irq = pdev->resource[1].start;
+ port->rs485_config = atmel_config_rs485;
+
+ tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
+ (unsigned long)port);
+ tasklet_disable(&atmel_port->tasklet);
+
+ memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
+
+ if (pdata && pdata->regs) {
+ /* Already mapped by setup code */
+ port->membase = pdata->regs;
+ } else {
+ port->flags |= UPF_IOREMAP;
+ port->membase = NULL;
+ }
+
+ /* for console, the clock could already be configured */
+ if (!atmel_port->clk) {
+ atmel_port->clk = clk_get(&pdev->dev, "usart");
+ if (IS_ERR(atmel_port->clk)) {
+ ret = PTR_ERR(atmel_port->clk);
+ atmel_port->clk = NULL;
+ return ret;
+ }
+ ret = clk_prepare_enable(atmel_port->clk);
+ if (ret) {
+ clk_put(atmel_port->clk);
+ atmel_port->clk = NULL;
+ return ret;
+ }
+ port->uartclk = clk_get_rate(atmel_port->clk);
+ clk_disable_unprepare(atmel_port->clk);
+ /* only enable clock when USART is in use */
+ }
+
+ /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */
+ if (port->rs485.flags & SER_RS485_ENABLED)
+ atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
+ else if (atmel_use_pdc_tx(port)) {
+ port->fifosize = PDC_BUFFER_SIZE;
+ atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE;
+ } else {
+ atmel_port->tx_done_mask = ATMEL_US_TXRDY;
+ }
+
+ return 0;
+}
+
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
+static void atmel_console_putchar(struct uart_port *port, int ch)
+{
+ while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
+ cpu_relax();
+ UART_PUT_CHAR(port, ch);
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void atmel_console_write(struct console *co, const char *s, u_int count)
+{
+ struct uart_port *port = &atmel_ports[co->index].uart;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int status, imr;
+ unsigned int pdc_tx;
+
+ /*
+ * First, save IMR and then disable interrupts
+ */
+ imr = UART_GET_IMR(port);
+ UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask);
+
+ /* Store PDC transmit status and disable it */
+ pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
+ uart_console_write(port, s, count, atmel_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore IMR
+ */
+ do {
+ status = UART_GET_CSR(port);
+ } while (!(status & ATMEL_US_TXRDY));
+
+ /* Restore PDC transmit status */
+ if (pdc_tx)
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+
+ /* set interrupts back the way they were */
+ UART_PUT_IER(port, imr);
+}
+
+/*
+ * If the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
+ */
+static void __init atmel_console_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits)
+{
+ unsigned int mr, quot;
+
+ /*
+ * If the baud rate generator isn't running, the port wasn't
+ * initialized by the boot loader.
+ */
+ quot = UART_GET_BRGR(port) & ATMEL_US_CD;
+ if (!quot)
+ return;
+
+ mr = UART_GET_MR(port) & ATMEL_US_CHRL;
+ if (mr == ATMEL_US_CHRL_8)
+ *bits = 8;
+ else
+ *bits = 7;
+
+ mr = UART_GET_MR(port) & ATMEL_US_PAR;
+ if (mr == ATMEL_US_PAR_EVEN)
+ *parity = 'e';
+ else if (mr == ATMEL_US_PAR_ODD)
+ *parity = 'o';
+
+ /*
+ * The serial core only rounds down when matching this to a
+ * supported baud rate. Make sure we don't end up slightly
+ * lower than one of those, as it would make us fall through
+ * to a much lower baud rate than we really want.
+ */
+ *baud = port->uartclk / (16 * (quot - 1));
+}
+
+static int __init atmel_console_setup(struct console *co, char *options)
+{
+ int ret;
+ struct uart_port *port = &atmel_ports[co->index].uart;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (port->membase == NULL) {
+ /* Port not initialized yet - delay setup */
+ return -ENODEV;
+ }
+
+ ret = clk_prepare_enable(atmel_ports[co->index].clk);
+ if (ret)
+ return ret;
+
+ UART_PUT_IDR(port, -1);
+ UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ atmel_console_get_options(port, &baud, &parity, &bits);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver atmel_uart;
+
+static struct console atmel_console = {
+ .name = ATMEL_DEVICENAME,
+ .write = atmel_console_write,
+ .device = uart_console_device,
+ .setup = atmel_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &atmel_uart,
+};
+
+#define ATMEL_CONSOLE_DEVICE (&atmel_console)
+
+/*
+ * Early console initialization (before VM subsystem initialized).
+ */
+static int __init atmel_console_init(void)
+{
+ int ret;
+ if (atmel_default_console_device) {
+ struct atmel_uart_data *pdata =
+ dev_get_platdata(&atmel_default_console_device->dev);
+ int id = pdata->num;
+ struct atmel_uart_port *port = &atmel_ports[id];
+
+ port->backup_imr = 0;
+ port->uart.line = id;
+
+ add_preferred_console(ATMEL_DEVICENAME, id, NULL);
+ ret = atmel_init_port(port, atmel_default_console_device);
+ if (ret)
+ return ret;
+ register_console(&atmel_console);
+ }
+
+ return 0;
+}
+
+console_initcall(atmel_console_init);
+
+/*
+ * Late console initialization.
+ */
+static int __init atmel_late_console_init(void)
+{
+ if (atmel_default_console_device
+ && !(atmel_console.flags & CON_ENABLED))
+ register_console(&atmel_console);
+
+ return 0;
+}
+
+core_initcall(atmel_late_console_init);
+
+static inline bool atmel_is_console_port(struct uart_port *port)
+{
+ return port->cons && port->cons->index == port->line;
+}
+
+#else
+#define ATMEL_CONSOLE_DEVICE NULL
+
+static inline bool atmel_is_console_port(struct uart_port *port)
+{
+ return false;
+}
+#endif
+
+static struct uart_driver atmel_uart = {
+ .owner = THIS_MODULE,
+ .driver_name = "atmel_serial",
+ .dev_name = ATMEL_DEVICENAME,
+ .major = SERIAL_ATMEL_MAJOR,
+ .minor = MINOR_START,
+ .nr = ATMEL_MAX_UART,
+ .cons = ATMEL_CONSOLE_DEVICE,
+};
+
+#ifdef CONFIG_PM
+static bool atmel_serial_clk_will_stop(void)
+{
+#ifdef CONFIG_ARCH_AT91
+ return at91_suspend_entering_slow_clock();
+#else
+ return false;
+#endif
+}
+
+static int atmel_serial_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_is_console_port(port) && console_suspend_enabled) {
+ /* Drain the TX shifter */
+ while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
+ cpu_relax();
+ }
+
+ /* we can not wake up if we're running on slow clock */
+ atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
+ if (atmel_serial_clk_will_stop()) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&atmel_port->lock_suspended, flags);
+ atmel_port->suspended = true;
+ spin_unlock_irqrestore(&atmel_port->lock_suspended, flags);
+ device_set_wakeup_enable(&pdev->dev, 0);
+ }
+
+ uart_suspend_port(&atmel_uart, port);
+
+ return 0;
+}
+
+static int atmel_serial_resume(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&atmel_port->lock_suspended, flags);
+ if (atmel_port->pending) {
+ atmel_handle_receive(port, atmel_port->pending);
+ atmel_handle_status(port, atmel_port->pending,
+ atmel_port->pending_status);
+ atmel_handle_transmit(port, atmel_port->pending);
+ atmel_port->pending = 0;
+ }
+ atmel_port->suspended = false;
+ spin_unlock_irqrestore(&atmel_port->lock_suspended, flags);
+
+ uart_resume_port(&atmel_uart, port);
+ device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
+
+ return 0;
+}
+#else
+#define atmel_serial_suspend NULL
+#define atmel_serial_resume NULL
+#endif
+
+static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev)
+{
+ enum mctrl_gpio_idx i;
+ struct gpio_desc *gpiod;
+
+ p->gpios = mctrl_gpio_init(dev, 0);
+ if (IS_ERR(p->gpios))
+ return PTR_ERR(p->gpios);
+
+ for (i = 0; i < UART_GPIO_MAX; i++) {
+ gpiod = mctrl_gpio_to_gpiod(p->gpios, i);
+ if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN))
+ p->gpio_irq[i] = gpiod_to_irq(gpiod);
+ else
+ p->gpio_irq[i] = -EINVAL;
+ }
+
+ return 0;
+}
+
+static int atmel_serial_probe(struct platform_device *pdev)
+{
+ struct atmel_uart_port *port;
+ struct device_node *np = pdev->dev.of_node;
+ struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
+ void *data;
+ int ret = -ENODEV;
+ bool rs485_enabled;
+
+ BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
+
+ if (np)
+ ret = of_alias_get_id(np, "serial");
+ else
+ if (pdata)
+ ret = pdata->num;
+
+ if (ret < 0)
+ /* port id not found in platform data nor device-tree aliases:
+ * auto-enumerate it */
+ ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART);
+
+ if (ret >= ATMEL_MAX_UART) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ if (test_and_set_bit(ret, atmel_ports_in_use)) {
+ /* port already in use */
+ ret = -EBUSY;
+ goto err;
+ }
+
+ port = &atmel_ports[ret];
+ port->backup_imr = 0;
+ port->uart.line = ret;
+
+ spin_lock_init(&port->lock_suspended);
+
+ ret = atmel_init_gpios(port, &pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to initialize GPIOs.");
+ goto err;
+ }
+
+ ret = atmel_init_port(port, pdev);
+ if (ret)
+ goto err_clear_bit;
+
+ if (!atmel_use_pdc_rx(&port->uart)) {
+ ret = -ENOMEM;
+ data = kmalloc(sizeof(struct atmel_uart_char)
+ * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
+ if (!data)
+ goto err_alloc_ring;
+ port->rx_ring.buf = data;
+ }
+
+ rs485_enabled = port->uart.rs485.flags & SER_RS485_ENABLED;
+
+ ret = uart_add_one_port(&atmel_uart, &port->uart);
+ if (ret)
+ goto err_add_port;
+
+#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
+ if (atmel_is_console_port(&port->uart)
+ && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
+ /*
+ * The serial core enabled the clock for us, so undo
+ * the clk_prepare_enable() in atmel_console_setup()
+ */
+ clk_disable_unprepare(port->clk);
+ }
+#endif
+
+ device_init_wakeup(&pdev->dev, 1);
+ platform_set_drvdata(pdev, port);
+
+ /*
+ * The peripheral clock has been disabled by atmel_init_port():
+ * enable it before accessing I/O registers
+ */
+ clk_prepare_enable(port->clk);
+
+ if (rs485_enabled) {
+ UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL);
+ UART_PUT_CR(&port->uart, ATMEL_US_RTSEN);
+ }
+
+ /*
+ * Get port name of usart or uart
+ */
+ atmel_get_ip_name(&port->uart);
+
+ /*
+ * The peripheral clock can now safely be disabled till the port
+ * is used
+ */
+ clk_disable_unprepare(port->clk);
+
+ return 0;
+
+err_add_port:
+ kfree(port->rx_ring.buf);
+ port->rx_ring.buf = NULL;
+err_alloc_ring:
+ if (!atmel_is_console_port(&port->uart)) {
+ clk_put(port->clk);
+ port->clk = NULL;
+ }
+err_clear_bit:
+ clear_bit(port->uart.line, atmel_ports_in_use);
+err:
+ return ret;
+}
+
+static int atmel_serial_remove(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ int ret = 0;
+
+ tasklet_kill(&atmel_port->tasklet);
+
+ device_init_wakeup(&pdev->dev, 0);
+
+ ret = uart_remove_one_port(&atmel_uart, port);
+
+ kfree(atmel_port->rx_ring.buf);
+
+ /* "port" is allocated statically, so we shouldn't free it */
+
+ clear_bit(port->line, atmel_ports_in_use);
+
+ clk_put(atmel_port->clk);
+
+ return ret;
+}
+
+static struct platform_driver atmel_serial_driver = {
+ .probe = atmel_serial_probe,
+ .remove = atmel_serial_remove,
+ .suspend = atmel_serial_suspend,
+ .resume = atmel_serial_resume,
+ .driver = {
+ .name = "atmel_usart",
+ .of_match_table = of_match_ptr(atmel_serial_dt_ids),
+ },
+};
+
+static int __init atmel_serial_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&atmel_uart);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&atmel_serial_driver);
+ if (ret)
+ uart_unregister_driver(&atmel_uart);
+
+ return ret;
+}
+
+static void __exit atmel_serial_exit(void)
+{
+ platform_driver_unregister(&atmel_serial_driver);
+ uart_unregister_driver(&atmel_uart);
+}
+
+module_init(atmel_serial_init);
+module_exit(atmel_serial_exit);
+
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_usart");