summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/fsl_lpuart.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/fsl_lpuart.c')
-rw-r--r--drivers/tty/serial/fsl_lpuart.c1944
1 files changed, 1944 insertions, 0 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
new file mode 100644
index 000000000..08ce76f4f
--- /dev/null
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -0,0 +1,1944 @@
+/*
+ * Freescale lpuart serial port driver
+ *
+ * Copyright 2012-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#if defined(CONFIG_SERIAL_FSL_LPUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/tty_flip.h>
+
+/* All registers are 8-bit width */
+#define UARTBDH 0x00
+#define UARTBDL 0x01
+#define UARTCR1 0x02
+#define UARTCR2 0x03
+#define UARTSR1 0x04
+#define UARTCR3 0x06
+#define UARTDR 0x07
+#define UARTCR4 0x0a
+#define UARTCR5 0x0b
+#define UARTMODEM 0x0d
+#define UARTPFIFO 0x10
+#define UARTCFIFO 0x11
+#define UARTSFIFO 0x12
+#define UARTTWFIFO 0x13
+#define UARTTCFIFO 0x14
+#define UARTRWFIFO 0x15
+
+#define UARTBDH_LBKDIE 0x80
+#define UARTBDH_RXEDGIE 0x40
+#define UARTBDH_SBR_MASK 0x1f
+
+#define UARTCR1_LOOPS 0x80
+#define UARTCR1_RSRC 0x20
+#define UARTCR1_M 0x10
+#define UARTCR1_WAKE 0x08
+#define UARTCR1_ILT 0x04
+#define UARTCR1_PE 0x02
+#define UARTCR1_PT 0x01
+
+#define UARTCR2_TIE 0x80
+#define UARTCR2_TCIE 0x40
+#define UARTCR2_RIE 0x20
+#define UARTCR2_ILIE 0x10
+#define UARTCR2_TE 0x08
+#define UARTCR2_RE 0x04
+#define UARTCR2_RWU 0x02
+#define UARTCR2_SBK 0x01
+
+#define UARTSR1_TDRE 0x80
+#define UARTSR1_TC 0x40
+#define UARTSR1_RDRF 0x20
+#define UARTSR1_IDLE 0x10
+#define UARTSR1_OR 0x08
+#define UARTSR1_NF 0x04
+#define UARTSR1_FE 0x02
+#define UARTSR1_PE 0x01
+
+#define UARTCR3_R8 0x80
+#define UARTCR3_T8 0x40
+#define UARTCR3_TXDIR 0x20
+#define UARTCR3_TXINV 0x10
+#define UARTCR3_ORIE 0x08
+#define UARTCR3_NEIE 0x04
+#define UARTCR3_FEIE 0x02
+#define UARTCR3_PEIE 0x01
+
+#define UARTCR4_MAEN1 0x80
+#define UARTCR4_MAEN2 0x40
+#define UARTCR4_M10 0x20
+#define UARTCR4_BRFA_MASK 0x1f
+#define UARTCR4_BRFA_OFF 0
+
+#define UARTCR5_TDMAS 0x80
+#define UARTCR5_RDMAS 0x20
+
+#define UARTMODEM_RXRTSE 0x08
+#define UARTMODEM_TXRTSPOL 0x04
+#define UARTMODEM_TXRTSE 0x02
+#define UARTMODEM_TXCTSE 0x01
+
+#define UARTPFIFO_TXFE 0x80
+#define UARTPFIFO_FIFOSIZE_MASK 0x7
+#define UARTPFIFO_TXSIZE_OFF 4
+#define UARTPFIFO_RXFE 0x08
+#define UARTPFIFO_RXSIZE_OFF 0
+
+#define UARTCFIFO_TXFLUSH 0x80
+#define UARTCFIFO_RXFLUSH 0x40
+#define UARTCFIFO_RXOFE 0x04
+#define UARTCFIFO_TXOFE 0x02
+#define UARTCFIFO_RXUFE 0x01
+
+#define UARTSFIFO_TXEMPT 0x80
+#define UARTSFIFO_RXEMPT 0x40
+#define UARTSFIFO_RXOF 0x04
+#define UARTSFIFO_TXOF 0x02
+#define UARTSFIFO_RXUF 0x01
+
+/* 32-bit register defination */
+#define UARTBAUD 0x00
+#define UARTSTAT 0x04
+#define UARTCTRL 0x08
+#define UARTDATA 0x0C
+#define UARTMATCH 0x10
+#define UARTMODIR 0x14
+#define UARTFIFO 0x18
+#define UARTWATER 0x1c
+
+#define UARTBAUD_MAEN1 0x80000000
+#define UARTBAUD_MAEN2 0x40000000
+#define UARTBAUD_M10 0x20000000
+#define UARTBAUD_TDMAE 0x00800000
+#define UARTBAUD_RDMAE 0x00200000
+#define UARTBAUD_MATCFG 0x00400000
+#define UARTBAUD_BOTHEDGE 0x00020000
+#define UARTBAUD_RESYNCDIS 0x00010000
+#define UARTBAUD_LBKDIE 0x00008000
+#define UARTBAUD_RXEDGIE 0x00004000
+#define UARTBAUD_SBNS 0x00002000
+#define UARTBAUD_SBR 0x00000000
+#define UARTBAUD_SBR_MASK 0x1fff
+
+#define UARTSTAT_LBKDIF 0x80000000
+#define UARTSTAT_RXEDGIF 0x40000000
+#define UARTSTAT_MSBF 0x20000000
+#define UARTSTAT_RXINV 0x10000000
+#define UARTSTAT_RWUID 0x08000000
+#define UARTSTAT_BRK13 0x04000000
+#define UARTSTAT_LBKDE 0x02000000
+#define UARTSTAT_RAF 0x01000000
+#define UARTSTAT_TDRE 0x00800000
+#define UARTSTAT_TC 0x00400000
+#define UARTSTAT_RDRF 0x00200000
+#define UARTSTAT_IDLE 0x00100000
+#define UARTSTAT_OR 0x00080000
+#define UARTSTAT_NF 0x00040000
+#define UARTSTAT_FE 0x00020000
+#define UARTSTAT_PE 0x00010000
+#define UARTSTAT_MA1F 0x00008000
+#define UARTSTAT_M21F 0x00004000
+
+#define UARTCTRL_R8T9 0x80000000
+#define UARTCTRL_R9T8 0x40000000
+#define UARTCTRL_TXDIR 0x20000000
+#define UARTCTRL_TXINV 0x10000000
+#define UARTCTRL_ORIE 0x08000000
+#define UARTCTRL_NEIE 0x04000000
+#define UARTCTRL_FEIE 0x02000000
+#define UARTCTRL_PEIE 0x01000000
+#define UARTCTRL_TIE 0x00800000
+#define UARTCTRL_TCIE 0x00400000
+#define UARTCTRL_RIE 0x00200000
+#define UARTCTRL_ILIE 0x00100000
+#define UARTCTRL_TE 0x00080000
+#define UARTCTRL_RE 0x00040000
+#define UARTCTRL_RWU 0x00020000
+#define UARTCTRL_SBK 0x00010000
+#define UARTCTRL_MA1IE 0x00008000
+#define UARTCTRL_MA2IE 0x00004000
+#define UARTCTRL_IDLECFG 0x00000100
+#define UARTCTRL_LOOPS 0x00000080
+#define UARTCTRL_DOZEEN 0x00000040
+#define UARTCTRL_RSRC 0x00000020
+#define UARTCTRL_M 0x00000010
+#define UARTCTRL_WAKE 0x00000008
+#define UARTCTRL_ILT 0x00000004
+#define UARTCTRL_PE 0x00000002
+#define UARTCTRL_PT 0x00000001
+
+#define UARTDATA_NOISY 0x00008000
+#define UARTDATA_PARITYE 0x00004000
+#define UARTDATA_FRETSC 0x00002000
+#define UARTDATA_RXEMPT 0x00001000
+#define UARTDATA_IDLINE 0x00000800
+#define UARTDATA_MASK 0x3ff
+
+#define UARTMODIR_IREN 0x00020000
+#define UARTMODIR_TXCTSSRC 0x00000020
+#define UARTMODIR_TXCTSC 0x00000010
+#define UARTMODIR_RXRTSE 0x00000008
+#define UARTMODIR_TXRTSPOL 0x00000004
+#define UARTMODIR_TXRTSE 0x00000002
+#define UARTMODIR_TXCTSE 0x00000001
+
+#define UARTFIFO_TXEMPT 0x00800000
+#define UARTFIFO_RXEMPT 0x00400000
+#define UARTFIFO_TXOF 0x00020000
+#define UARTFIFO_RXUF 0x00010000
+#define UARTFIFO_TXFLUSH 0x00008000
+#define UARTFIFO_RXFLUSH 0x00004000
+#define UARTFIFO_TXOFE 0x00000200
+#define UARTFIFO_RXUFE 0x00000100
+#define UARTFIFO_TXFE 0x00000080
+#define UARTFIFO_FIFOSIZE_MASK 0x7
+#define UARTFIFO_TXSIZE_OFF 4
+#define UARTFIFO_RXFE 0x00000008
+#define UARTFIFO_RXSIZE_OFF 0
+
+#define UARTWATER_COUNT_MASK 0xff
+#define UARTWATER_TXCNT_OFF 8
+#define UARTWATER_RXCNT_OFF 24
+#define UARTWATER_WATER_MASK 0xff
+#define UARTWATER_TXWATER_OFF 0
+#define UARTWATER_RXWATER_OFF 16
+
+#define FSL_UART_RX_DMA_BUFFER_SIZE 64
+
+#define DRIVER_NAME "fsl-lpuart"
+#define DEV_NAME "ttyLP"
+#define UART_NR 6
+
+struct lpuart_port {
+ struct uart_port port;
+ struct clk *clk;
+ unsigned int txfifo_size;
+ unsigned int rxfifo_size;
+ bool lpuart32;
+
+ bool lpuart_dma_tx_use;
+ bool lpuart_dma_rx_use;
+ struct dma_chan *dma_tx_chan;
+ struct dma_chan *dma_rx_chan;
+ struct dma_async_tx_descriptor *dma_tx_desc;
+ struct dma_async_tx_descriptor *dma_rx_desc;
+ dma_addr_t dma_tx_buf_bus;
+ dma_addr_t dma_rx_buf_bus;
+ dma_cookie_t dma_tx_cookie;
+ dma_cookie_t dma_rx_cookie;
+ unsigned char *dma_tx_buf_virt;
+ unsigned char *dma_rx_buf_virt;
+ unsigned int dma_tx_bytes;
+ unsigned int dma_rx_bytes;
+ int dma_tx_in_progress;
+ int dma_rx_in_progress;
+ unsigned int dma_rx_timeout;
+ struct timer_list lpuart_timer;
+};
+
+static const struct of_device_id lpuart_dt_ids[] = {
+ {
+ .compatible = "fsl,vf610-lpuart",
+ },
+ {
+ .compatible = "fsl,ls1021a-lpuart",
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
+
+/* Forward declare this for the dma callbacks*/
+static void lpuart_dma_tx_complete(void *arg);
+static void lpuart_dma_rx_complete(void *arg);
+
+static u32 lpuart32_read(void __iomem *addr)
+{
+ return ioread32be(addr);
+}
+
+static void lpuart32_write(u32 val, void __iomem *addr)
+{
+ iowrite32be(val, addr);
+}
+
+static void lpuart_stop_tx(struct uart_port *port)
+{
+ unsigned char temp;
+
+ temp = readb(port->membase + UARTCR2);
+ temp &= ~(UARTCR2_TIE | UARTCR2_TCIE);
+ writeb(temp, port->membase + UARTCR2);
+}
+
+static void lpuart32_stop_tx(struct uart_port *port)
+{
+ unsigned long temp;
+
+ temp = lpuart32_read(port->membase + UARTCTRL);
+ temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE);
+ lpuart32_write(temp, port->membase + UARTCTRL);
+}
+
+static void lpuart_stop_rx(struct uart_port *port)
+{
+ unsigned char temp;
+
+ temp = readb(port->membase + UARTCR2);
+ writeb(temp & ~UARTCR2_RE, port->membase + UARTCR2);
+}
+
+static void lpuart32_stop_rx(struct uart_port *port)
+{
+ unsigned long temp;
+
+ temp = lpuart32_read(port->membase + UARTCTRL);
+ lpuart32_write(temp & ~UARTCTRL_RE, port->membase + UARTCTRL);
+}
+
+static void lpuart_copy_rx_to_tty(struct lpuart_port *sport,
+ struct tty_port *tty, int count)
+{
+ int copied;
+
+ sport->port.icount.rx += count;
+
+ if (!tty) {
+ dev_err(sport->port.dev, "No tty port\n");
+ return;
+ }
+
+ dma_sync_single_for_cpu(sport->port.dev, sport->dma_rx_buf_bus,
+ FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+ copied = tty_insert_flip_string(tty,
+ ((unsigned char *)(sport->dma_rx_buf_virt)), count);
+
+ if (copied != count) {
+ WARN_ON(1);
+ dev_err(sport->port.dev, "RxData copy to tty layer failed\n");
+ }
+
+ dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus,
+ FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
+}
+
+static void lpuart_pio_tx(struct lpuart_port *sport)
+{
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ while (!uart_circ_empty(xmit) &&
+ readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size) {
+ writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ sport->port.icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+ if (uart_circ_empty(xmit))
+ writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS,
+ sport->port.membase + UARTCR5);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static int lpuart_dma_tx(struct lpuart_port *sport, unsigned long count)
+{
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ dma_addr_t tx_bus_addr;
+
+ dma_sync_single_for_device(sport->port.dev, sport->dma_tx_buf_bus,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+ sport->dma_tx_bytes = count & ~(sport->txfifo_size - 1);
+ tx_bus_addr = sport->dma_tx_buf_bus + xmit->tail;
+ sport->dma_tx_desc = dmaengine_prep_slave_single(sport->dma_tx_chan,
+ tx_bus_addr, sport->dma_tx_bytes,
+ DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
+
+ if (!sport->dma_tx_desc) {
+ dev_err(sport->port.dev, "Not able to get desc for tx\n");
+ return -EIO;
+ }
+
+ sport->dma_tx_desc->callback = lpuart_dma_tx_complete;
+ sport->dma_tx_desc->callback_param = sport;
+ sport->dma_tx_in_progress = 1;
+ sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc);
+ dma_async_issue_pending(sport->dma_tx_chan);
+
+ return 0;
+}
+
+static void lpuart_prepare_tx(struct lpuart_port *sport)
+{
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ unsigned long count = CIRC_CNT_TO_END(xmit->head,
+ xmit->tail, UART_XMIT_SIZE);
+
+ if (!count)
+ return;
+
+ if (count < sport->txfifo_size)
+ writeb(readb(sport->port.membase + UARTCR5) & ~UARTCR5_TDMAS,
+ sport->port.membase + UARTCR5);
+ else {
+ writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS,
+ sport->port.membase + UARTCR5);
+ lpuart_dma_tx(sport, count);
+ }
+}
+
+static void lpuart_dma_tx_complete(void *arg)
+{
+ struct lpuart_port *sport = arg;
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ unsigned long flags;
+
+ async_tx_ack(sport->dma_tx_desc);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ xmit->tail = (xmit->tail + sport->dma_tx_bytes) & (UART_XMIT_SIZE - 1);
+ sport->dma_tx_in_progress = 0;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+ lpuart_prepare_tx(sport);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static int lpuart_dma_rx(struct lpuart_port *sport)
+{
+ dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus,
+ FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
+ sport->dma_rx_desc = dmaengine_prep_slave_single(sport->dma_rx_chan,
+ sport->dma_rx_buf_bus, FSL_UART_RX_DMA_BUFFER_SIZE,
+ DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
+
+ if (!sport->dma_rx_desc) {
+ dev_err(sport->port.dev, "Not able to get desc for rx\n");
+ return -EIO;
+ }
+
+ sport->dma_rx_desc->callback = lpuart_dma_rx_complete;
+ sport->dma_rx_desc->callback_param = sport;
+ sport->dma_rx_in_progress = 1;
+ sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc);
+ dma_async_issue_pending(sport->dma_rx_chan);
+
+ return 0;
+}
+
+static void lpuart_flush_buffer(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ if (sport->lpuart_dma_tx_use) {
+ dmaengine_terminate_all(sport->dma_tx_chan);
+ sport->dma_tx_in_progress = 0;
+ }
+}
+
+static void lpuart_dma_rx_complete(void *arg)
+{
+ struct lpuart_port *sport = arg;
+ struct tty_port *port = &sport->port.state->port;
+ unsigned long flags;
+
+ async_tx_ack(sport->dma_rx_desc);
+ mod_timer(&sport->lpuart_timer, jiffies + sport->dma_rx_timeout);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ sport->dma_rx_in_progress = 0;
+ lpuart_copy_rx_to_tty(sport, port, FSL_UART_RX_DMA_BUFFER_SIZE);
+ tty_flip_buffer_push(port);
+ lpuart_dma_rx(sport);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static void lpuart_timer_func(unsigned long data)
+{
+ struct lpuart_port *sport = (struct lpuart_port *)data;
+ struct tty_port *port = &sport->port.state->port;
+ struct dma_tx_state state;
+ unsigned long flags;
+ unsigned char temp;
+ int count;
+
+ del_timer(&sport->lpuart_timer);
+ dmaengine_pause(sport->dma_rx_chan);
+ dmaengine_tx_status(sport->dma_rx_chan, sport->dma_rx_cookie, &state);
+ dmaengine_terminate_all(sport->dma_rx_chan);
+ count = FSL_UART_RX_DMA_BUFFER_SIZE - state.residue;
+ async_tx_ack(sport->dma_rx_desc);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ sport->dma_rx_in_progress = 0;
+ lpuart_copy_rx_to_tty(sport, port, count);
+ tty_flip_buffer_push(port);
+ temp = readb(sport->port.membase + UARTCR5);
+ writeb(temp & ~UARTCR5_RDMAS, sport->port.membase + UARTCR5);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static inline void lpuart_prepare_rx(struct lpuart_port *sport)
+{
+ unsigned long flags;
+ unsigned char temp;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout;
+ add_timer(&sport->lpuart_timer);
+
+ lpuart_dma_rx(sport);
+ temp = readb(sport->port.membase + UARTCR5);
+ writeb(temp | UARTCR5_RDMAS, sport->port.membase + UARTCR5);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
+{
+ struct circ_buf *xmit = &sport->port.state->xmit;
+
+ while (!uart_circ_empty(xmit) &&
+ (readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size)) {
+ writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ sport->port.icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+ if (uart_circ_empty(xmit))
+ lpuart_stop_tx(&sport->port);
+}
+
+static inline void lpuart32_transmit_buffer(struct lpuart_port *sport)
+{
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ unsigned long txcnt;
+
+ txcnt = lpuart32_read(sport->port.membase + UARTWATER);
+ txcnt = txcnt >> UARTWATER_TXCNT_OFF;
+ txcnt &= UARTWATER_COUNT_MASK;
+ while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) {
+ lpuart32_write(xmit->buf[xmit->tail], sport->port.membase + UARTDATA);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ sport->port.icount.tx++;
+ txcnt = lpuart32_read(sport->port.membase + UARTWATER);
+ txcnt = txcnt >> UARTWATER_TXCNT_OFF;
+ txcnt &= UARTWATER_COUNT_MASK;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+ if (uart_circ_empty(xmit))
+ lpuart32_stop_tx(&sport->port);
+}
+
+static void lpuart_start_tx(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ unsigned char temp;
+
+ temp = readb(port->membase + UARTCR2);
+ writeb(temp | UARTCR2_TIE, port->membase + UARTCR2);
+
+ if (sport->lpuart_dma_tx_use) {
+ if (!uart_circ_empty(xmit) && !sport->dma_tx_in_progress)
+ lpuart_prepare_tx(sport);
+ } else {
+ if (readb(port->membase + UARTSR1) & UARTSR1_TDRE)
+ lpuart_transmit_buffer(sport);
+ }
+}
+
+static void lpuart32_start_tx(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ unsigned long temp;
+
+ temp = lpuart32_read(port->membase + UARTCTRL);
+ lpuart32_write(temp | UARTCTRL_TIE, port->membase + UARTCTRL);
+
+ if (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE)
+ lpuart32_transmit_buffer(sport);
+}
+
+static irqreturn_t lpuart_txint(int irq, void *dev_id)
+{
+ struct lpuart_port *sport = dev_id;
+ struct circ_buf *xmit = &sport->port.state->xmit;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+ if (sport->port.x_char) {
+ if (sport->lpuart32)
+ lpuart32_write(sport->port.x_char, sport->port.membase + UARTDATA);
+ else
+ writeb(sport->port.x_char, sport->port.membase + UARTDR);
+ goto out;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
+ if (sport->lpuart32)
+ lpuart32_stop_tx(&sport->port);
+ else
+ lpuart_stop_tx(&sport->port);
+ goto out;
+ }
+
+ if (sport->lpuart32)
+ lpuart32_transmit_buffer(sport);
+ else
+ lpuart_transmit_buffer(sport);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+out:
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t lpuart_rxint(int irq, void *dev_id)
+{
+ struct lpuart_port *sport = dev_id;
+ unsigned int flg, ignored = 0;
+ struct tty_port *port = &sport->port.state->port;
+ unsigned long flags;
+ unsigned char rx, sr;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) {
+ flg = TTY_NORMAL;
+ sport->port.icount.rx++;
+ /*
+ * to clear the FE, OR, NF, FE, PE flags,
+ * read SR1 then read DR
+ */
+ sr = readb(sport->port.membase + UARTSR1);
+ rx = readb(sport->port.membase + UARTDR);
+
+ if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
+ continue;
+
+ if (sr & (UARTSR1_PE | UARTSR1_OR | UARTSR1_FE)) {
+ if (sr & UARTSR1_PE)
+ sport->port.icount.parity++;
+ else if (sr & UARTSR1_FE)
+ sport->port.icount.frame++;
+
+ if (sr & UARTSR1_OR)
+ sport->port.icount.overrun++;
+
+ if (sr & sport->port.ignore_status_mask) {
+ if (++ignored > 100)
+ goto out;
+ continue;
+ }
+
+ sr &= sport->port.read_status_mask;
+
+ if (sr & UARTSR1_PE)
+ flg = TTY_PARITY;
+ else if (sr & UARTSR1_FE)
+ flg = TTY_FRAME;
+
+ if (sr & UARTSR1_OR)
+ flg = TTY_OVERRUN;
+
+#ifdef SUPPORT_SYSRQ
+ sport->port.sysrq = 0;
+#endif
+ }
+
+ tty_insert_flip_char(port, rx, flg);
+ }
+
+out:
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ tty_flip_buffer_push(port);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t lpuart32_rxint(int irq, void *dev_id)
+{
+ struct lpuart_port *sport = dev_id;
+ unsigned int flg, ignored = 0;
+ struct tty_port *port = &sport->port.state->port;
+ unsigned long flags;
+ unsigned long rx, sr;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ while (!(lpuart32_read(sport->port.membase + UARTFIFO) & UARTFIFO_RXEMPT)) {
+ flg = TTY_NORMAL;
+ sport->port.icount.rx++;
+ /*
+ * to clear the FE, OR, NF, FE, PE flags,
+ * read STAT then read DATA reg
+ */
+ sr = lpuart32_read(sport->port.membase + UARTSTAT);
+ rx = lpuart32_read(sport->port.membase + UARTDATA);
+ rx &= 0x3ff;
+
+ if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
+ continue;
+
+ if (sr & (UARTSTAT_PE | UARTSTAT_OR | UARTSTAT_FE)) {
+ if (sr & UARTSTAT_PE)
+ sport->port.icount.parity++;
+ else if (sr & UARTSTAT_FE)
+ sport->port.icount.frame++;
+
+ if (sr & UARTSTAT_OR)
+ sport->port.icount.overrun++;
+
+ if (sr & sport->port.ignore_status_mask) {
+ if (++ignored > 100)
+ goto out;
+ continue;
+ }
+
+ sr &= sport->port.read_status_mask;
+
+ if (sr & UARTSTAT_PE)
+ flg = TTY_PARITY;
+ else if (sr & UARTSTAT_FE)
+ flg = TTY_FRAME;
+
+ if (sr & UARTSTAT_OR)
+ flg = TTY_OVERRUN;
+
+#ifdef SUPPORT_SYSRQ
+ sport->port.sysrq = 0;
+#endif
+ }
+
+ tty_insert_flip_char(port, rx, flg);
+ }
+
+out:
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ tty_flip_buffer_push(port);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t lpuart_int(int irq, void *dev_id)
+{
+ struct lpuart_port *sport = dev_id;
+ unsigned char sts, crdma;
+
+ sts = readb(sport->port.membase + UARTSR1);
+ crdma = readb(sport->port.membase + UARTCR5);
+
+ if (sts & UARTSR1_RDRF && !(crdma & UARTCR5_RDMAS)) {
+ if (sport->lpuart_dma_rx_use)
+ lpuart_prepare_rx(sport);
+ else
+ lpuart_rxint(irq, dev_id);
+ }
+ if (sts & UARTSR1_TDRE && !(crdma & UARTCR5_TDMAS)) {
+ if (sport->lpuart_dma_tx_use)
+ lpuart_pio_tx(sport);
+ else
+ lpuart_txint(irq, dev_id);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t lpuart32_int(int irq, void *dev_id)
+{
+ struct lpuart_port *sport = dev_id;
+ unsigned long sts, rxcount;
+
+ sts = lpuart32_read(sport->port.membase + UARTSTAT);
+ rxcount = lpuart32_read(sport->port.membase + UARTWATER);
+ rxcount = rxcount >> UARTWATER_RXCNT_OFF;
+
+ if (sts & UARTSTAT_RDRF || rxcount > 0)
+ lpuart32_rxint(irq, dev_id);
+
+ if ((sts & UARTSTAT_TDRE) &&
+ !(lpuart32_read(sport->port.membase + UARTBAUD) & UARTBAUD_TDMAE))
+ lpuart_txint(irq, dev_id);
+
+ lpuart32_write(sts, sport->port.membase + UARTSTAT);
+ return IRQ_HANDLED;
+}
+
+/* return TIOCSER_TEMT when transmitter is not busy */
+static unsigned int lpuart_tx_empty(struct uart_port *port)
+{
+ return (readb(port->membase + UARTSR1) & UARTSR1_TC) ?
+ TIOCSER_TEMT : 0;
+}
+
+static unsigned int lpuart32_tx_empty(struct uart_port *port)
+{
+ return (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TC) ?
+ TIOCSER_TEMT : 0;
+}
+
+static unsigned int lpuart_get_mctrl(struct uart_port *port)
+{
+ unsigned int temp = 0;
+ unsigned char reg;
+
+ reg = readb(port->membase + UARTMODEM);
+ if (reg & UARTMODEM_TXCTSE)
+ temp |= TIOCM_CTS;
+
+ if (reg & UARTMODEM_RXRTSE)
+ temp |= TIOCM_RTS;
+
+ return temp;
+}
+
+static unsigned int lpuart32_get_mctrl(struct uart_port *port)
+{
+ unsigned int temp = 0;
+ unsigned long reg;
+
+ reg = lpuart32_read(port->membase + UARTMODIR);
+ if (reg & UARTMODIR_TXCTSE)
+ temp |= TIOCM_CTS;
+
+ if (reg & UARTMODIR_RXRTSE)
+ temp |= TIOCM_RTS;
+
+ return temp;
+}
+
+static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ unsigned char temp;
+
+ temp = readb(port->membase + UARTMODEM) &
+ ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+
+ if (mctrl & TIOCM_RTS)
+ temp |= UARTMODEM_RXRTSE;
+
+ if (mctrl & TIOCM_CTS)
+ temp |= UARTMODEM_TXCTSE;
+
+ writeb(temp, port->membase + UARTMODEM);
+}
+
+static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ unsigned long temp;
+
+ temp = lpuart32_read(port->membase + UARTMODIR) &
+ ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
+
+ if (mctrl & TIOCM_RTS)
+ temp |= UARTMODIR_RXRTSE;
+
+ if (mctrl & TIOCM_CTS)
+ temp |= UARTMODIR_TXCTSE;
+
+ lpuart32_write(temp, port->membase + UARTMODIR);
+}
+
+static void lpuart_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned char temp;
+
+ temp = readb(port->membase + UARTCR2) & ~UARTCR2_SBK;
+
+ if (break_state != 0)
+ temp |= UARTCR2_SBK;
+
+ writeb(temp, port->membase + UARTCR2);
+}
+
+static void lpuart32_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned long temp;
+
+ temp = lpuart32_read(port->membase + UARTCTRL) & ~UARTCTRL_SBK;
+
+ if (break_state != 0)
+ temp |= UARTCTRL_SBK;
+
+ lpuart32_write(temp, port->membase + UARTCTRL);
+}
+
+static void lpuart_setup_watermark(struct lpuart_port *sport)
+{
+ unsigned char val, cr2;
+ unsigned char cr2_saved;
+
+ cr2 = readb(sport->port.membase + UARTCR2);
+ cr2_saved = cr2;
+ cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_TE |
+ UARTCR2_RIE | UARTCR2_RE);
+ writeb(cr2, sport->port.membase + UARTCR2);
+
+ val = readb(sport->port.membase + UARTPFIFO);
+ writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE,
+ sport->port.membase + UARTPFIFO);
+
+ /* explicitly clear RDRF */
+ readb(sport->port.membase + UARTSR1);
+
+ /* flush Tx and Rx FIFO */
+ writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
+ sport->port.membase + UARTCFIFO);
+
+ writeb(0, sport->port.membase + UARTTWFIFO);
+ writeb(1, sport->port.membase + UARTRWFIFO);
+
+ /* Restore cr2 */
+ writeb(cr2_saved, sport->port.membase + UARTCR2);
+}
+
+static void lpuart32_setup_watermark(struct lpuart_port *sport)
+{
+ unsigned long val, ctrl;
+ unsigned long ctrl_saved;
+
+ ctrl = lpuart32_read(sport->port.membase + UARTCTRL);
+ ctrl_saved = ctrl;
+ ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE |
+ UARTCTRL_RIE | UARTCTRL_RE);
+ lpuart32_write(ctrl, sport->port.membase + UARTCTRL);
+
+ /* enable FIFO mode */
+ val = lpuart32_read(sport->port.membase + UARTFIFO);
+ val |= UARTFIFO_TXFE | UARTFIFO_RXFE;
+ val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH;
+ lpuart32_write(val, sport->port.membase + UARTFIFO);
+
+ /* set the watermark */
+ val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF);
+ lpuart32_write(val, sport->port.membase + UARTWATER);
+
+ /* Restore cr2 */
+ lpuart32_write(ctrl_saved, sport->port.membase + UARTCTRL);
+}
+
+static int lpuart_dma_tx_request(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ struct dma_slave_config dma_tx_sconfig;
+ dma_addr_t dma_bus;
+ unsigned char *dma_buf;
+ int ret;
+
+ dma_bus = dma_map_single(sport->dma_tx_chan->device->dev,
+ sport->port.state->xmit.buf,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+
+ if (dma_mapping_error(sport->dma_tx_chan->device->dev, dma_bus)) {
+ dev_err(sport->port.dev, "dma_map_single tx failed\n");
+ return -ENOMEM;
+ }
+
+ dma_buf = sport->port.state->xmit.buf;
+ dma_tx_sconfig.dst_addr = sport->port.mapbase + UARTDR;
+ dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_tx_sconfig.dst_maxburst = sport->txfifo_size;
+ dma_tx_sconfig.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(sport->dma_tx_chan, &dma_tx_sconfig);
+
+ if (ret < 0) {
+ dev_err(sport->port.dev,
+ "Dma slave config failed, err = %d\n", ret);
+ return ret;
+ }
+
+ sport->dma_tx_buf_virt = dma_buf;
+ sport->dma_tx_buf_bus = dma_bus;
+ sport->dma_tx_in_progress = 0;
+
+ return 0;
+}
+
+static int lpuart_dma_rx_request(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ struct dma_slave_config dma_rx_sconfig;
+ dma_addr_t dma_bus;
+ unsigned char *dma_buf;
+ int ret;
+
+ dma_buf = devm_kzalloc(sport->port.dev,
+ FSL_UART_RX_DMA_BUFFER_SIZE, GFP_KERNEL);
+
+ if (!dma_buf) {
+ dev_err(sport->port.dev, "Dma rx alloc failed\n");
+ return -ENOMEM;
+ }
+
+ dma_bus = dma_map_single(sport->dma_rx_chan->device->dev, dma_buf,
+ FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+
+ if (dma_mapping_error(sport->dma_rx_chan->device->dev, dma_bus)) {
+ dev_err(sport->port.dev, "dma_map_single rx failed\n");
+ return -ENOMEM;
+ }
+
+ dma_rx_sconfig.src_addr = sport->port.mapbase + UARTDR;
+ dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_rx_sconfig.src_maxburst = 1;
+ dma_rx_sconfig.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(sport->dma_rx_chan, &dma_rx_sconfig);
+
+ if (ret < 0) {
+ dev_err(sport->port.dev,
+ "Dma slave config failed, err = %d\n", ret);
+ return ret;
+ }
+
+ sport->dma_rx_buf_virt = dma_buf;
+ sport->dma_rx_buf_bus = dma_bus;
+ sport->dma_rx_in_progress = 0;
+
+ return 0;
+}
+
+static void lpuart_dma_tx_free(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+
+ dma_unmap_single(sport->port.dev, sport->dma_tx_buf_bus,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+
+ sport->dma_tx_buf_bus = 0;
+ sport->dma_tx_buf_virt = NULL;
+}
+
+static void lpuart_dma_rx_free(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+
+ dma_unmap_single(sport->port.dev, sport->dma_rx_buf_bus,
+ FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+
+ sport->dma_rx_buf_bus = 0;
+ sport->dma_rx_buf_virt = NULL;
+}
+
+static int lpuart_startup(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ int ret;
+ unsigned long flags;
+ unsigned char temp;
+
+ /* determine FIFO size and enable FIFO mode */
+ temp = readb(sport->port.membase + UARTPFIFO);
+
+ sport->txfifo_size = 0x1 << (((temp >> UARTPFIFO_TXSIZE_OFF) &
+ UARTPFIFO_FIFOSIZE_MASK) + 1);
+
+ sport->port.fifosize = sport->txfifo_size;
+
+ sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) &
+ UARTPFIFO_FIFOSIZE_MASK) + 1);
+
+ if (sport->dma_rx_chan && !lpuart_dma_rx_request(port)) {
+ sport->lpuart_dma_rx_use = true;
+ setup_timer(&sport->lpuart_timer, lpuart_timer_func,
+ (unsigned long)sport);
+ } else
+ sport->lpuart_dma_rx_use = false;
+
+
+ if (sport->dma_tx_chan && !lpuart_dma_tx_request(port)) {
+ sport->lpuart_dma_tx_use = true;
+ temp = readb(port->membase + UARTCR5);
+ temp &= ~UARTCR5_RDMAS;
+ writeb(temp | UARTCR5_TDMAS, port->membase + UARTCR5);
+ } else
+ sport->lpuart_dma_tx_use = false;
+
+ ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0,
+ DRIVER_NAME, sport);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ lpuart_setup_watermark(sport);
+
+ temp = readb(sport->port.membase + UARTCR2);
+ temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE);
+ writeb(temp, sport->port.membase + UARTCR2);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+ return 0;
+}
+
+static int lpuart32_startup(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ int ret;
+ unsigned long flags;
+ unsigned long temp;
+
+ /* determine FIFO size */
+ temp = lpuart32_read(sport->port.membase + UARTFIFO);
+
+ sport->txfifo_size = 0x1 << (((temp >> UARTFIFO_TXSIZE_OFF) &
+ UARTFIFO_FIFOSIZE_MASK) - 1);
+
+ sport->rxfifo_size = 0x1 << (((temp >> UARTFIFO_RXSIZE_OFF) &
+ UARTFIFO_FIFOSIZE_MASK) - 1);
+
+ ret = devm_request_irq(port->dev, port->irq, lpuart32_int, 0,
+ DRIVER_NAME, sport);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ lpuart32_setup_watermark(sport);
+
+ temp = lpuart32_read(sport->port.membase + UARTCTRL);
+ temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE);
+ temp |= UARTCTRL_ILIE;
+ lpuart32_write(temp, sport->port.membase + UARTCTRL);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+ return 0;
+}
+
+static void lpuart_shutdown(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ unsigned char temp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* disable Rx/Tx and interrupts */
+ temp = readb(port->membase + UARTCR2);
+ temp &= ~(UARTCR2_TE | UARTCR2_RE |
+ UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE);
+ writeb(temp, port->membase + UARTCR2);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ devm_free_irq(port->dev, port->irq, sport);
+
+ if (sport->lpuart_dma_rx_use) {
+ lpuart_dma_rx_free(&sport->port);
+ del_timer_sync(&sport->lpuart_timer);
+ }
+
+ if (sport->lpuart_dma_tx_use)
+ lpuart_dma_tx_free(&sport->port);
+}
+
+static void lpuart32_shutdown(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ unsigned long temp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* disable Rx/Tx and interrupts */
+ temp = lpuart32_read(port->membase + UARTCTRL);
+ temp &= ~(UARTCTRL_TE | UARTCTRL_RE |
+ UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
+ lpuart32_write(temp, port->membase + UARTCTRL);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ devm_free_irq(port->dev, port->irq, sport);
+}
+
+static void
+lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ unsigned long flags;
+ unsigned char cr1, old_cr1, old_cr2, cr4, bdh, modem;
+ unsigned int baud;
+ unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
+ unsigned int sbr, brfa;
+
+ cr1 = old_cr1 = readb(sport->port.membase + UARTCR1);
+ old_cr2 = readb(sport->port.membase + UARTCR2);
+ cr4 = readb(sport->port.membase + UARTCR4);
+ bdh = readb(sport->port.membase + UARTBDH);
+ modem = readb(sport->port.membase + UARTMODEM);
+ /*
+ * only support CS8 and CS7, and for CS7 must enable PE.
+ * supported mode:
+ * - (7,e/o,1)
+ * - (8,n,1)
+ * - (8,m/s,1)
+ * - (8,e/o,1)
+ */
+ while ((termios->c_cflag & CSIZE) != CS8 &&
+ (termios->c_cflag & CSIZE) != CS7) {
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= old_csize;
+ old_csize = CS8;
+ }
+
+ if ((termios->c_cflag & CSIZE) == CS8 ||
+ (termios->c_cflag & CSIZE) == CS7)
+ cr1 = old_cr1 & ~UARTCR1_M;
+
+ if (termios->c_cflag & CMSPAR) {
+ if ((termios->c_cflag & CSIZE) != CS8) {
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
+ }
+ cr1 |= UARTCR1_M;
+ }
+
+ if (termios->c_cflag & CRTSCTS) {
+ modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+ } else {
+ termios->c_cflag &= ~CRTSCTS;
+ modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ termios->c_cflag &= ~CSTOPB;
+
+ /* parity must be enabled when CS7 to match 8-bits format */
+ if ((termios->c_cflag & CSIZE) == CS7)
+ termios->c_cflag |= PARENB;
+
+ if ((termios->c_cflag & PARENB)) {
+ if (termios->c_cflag & CMSPAR) {
+ cr1 &= ~UARTCR1_PE;
+ cr1 |= UARTCR1_M;
+ } else {
+ cr1 |= UARTCR1_PE;
+ if ((termios->c_cflag & CSIZE) == CS8)
+ cr1 |= UARTCR1_M;
+ if (termios->c_cflag & PARODD)
+ cr1 |= UARTCR1_PT;
+ else
+ cr1 &= ~UARTCR1_PT;
+ }
+ }
+
+ /* ask the core to calculate the divisor */
+ baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ sport->port.read_status_mask = 0;
+ if (termios->c_iflag & INPCK)
+ sport->port.read_status_mask |= (UARTSR1_FE | UARTSR1_PE);
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+ sport->port.read_status_mask |= UARTSR1_FE;
+
+ /* characters to ignore */
+ sport->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |= UARTSR1_PE;
+ if (termios->c_iflag & IGNBRK) {
+ sport->port.ignore_status_mask |= UARTSR1_FE;
+ /*
+ * if we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |= UARTSR1_OR;
+ }
+
+ /* update the per-port timeout */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ if (sport->lpuart_dma_rx_use) {
+ /* Calculate delay for 1.5 DMA buffers */
+ sport->dma_rx_timeout = (sport->port.timeout - HZ / 50) *
+ FSL_UART_RX_DMA_BUFFER_SIZE * 3 /
+ sport->rxfifo_size / 2;
+ dev_dbg(port->dev, "DMA Rx t-out %ums, tty t-out %u jiffies\n",
+ sport->dma_rx_timeout * 1000 / HZ, sport->port.timeout);
+ if (sport->dma_rx_timeout < msecs_to_jiffies(20))
+ sport->dma_rx_timeout = msecs_to_jiffies(20);
+ }
+
+ /* wait transmit engin complete */
+ while (!(readb(sport->port.membase + UARTSR1) & UARTSR1_TC))
+ barrier();
+
+ /* disable transmit and receive */
+ writeb(old_cr2 & ~(UARTCR2_TE | UARTCR2_RE),
+ sport->port.membase + UARTCR2);
+
+ sbr = sport->port.uartclk / (16 * baud);
+ brfa = ((sport->port.uartclk - (16 * sbr * baud)) * 2) / baud;
+ bdh &= ~UARTBDH_SBR_MASK;
+ bdh |= (sbr >> 8) & 0x1F;
+ cr4 &= ~UARTCR4_BRFA_MASK;
+ brfa &= UARTCR4_BRFA_MASK;
+ writeb(cr4 | brfa, sport->port.membase + UARTCR4);
+ writeb(bdh, sport->port.membase + UARTBDH);
+ writeb(sbr & 0xFF, sport->port.membase + UARTBDL);
+ writeb(cr1, sport->port.membase + UARTCR1);
+ writeb(modem, sport->port.membase + UARTMODEM);
+
+ /* restore control register */
+ writeb(old_cr2, sport->port.membase + UARTCR2);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static void
+lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ unsigned long flags;
+ unsigned long ctrl, old_ctrl, bd, modem;
+ unsigned int baud;
+ unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
+ unsigned int sbr;
+
+ ctrl = old_ctrl = lpuart32_read(sport->port.membase + UARTCTRL);
+ bd = lpuart32_read(sport->port.membase + UARTBAUD);
+ modem = lpuart32_read(sport->port.membase + UARTMODIR);
+ /*
+ * only support CS8 and CS7, and for CS7 must enable PE.
+ * supported mode:
+ * - (7,e/o,1)
+ * - (8,n,1)
+ * - (8,m/s,1)
+ * - (8,e/o,1)
+ */
+ while ((termios->c_cflag & CSIZE) != CS8 &&
+ (termios->c_cflag & CSIZE) != CS7) {
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= old_csize;
+ old_csize = CS8;
+ }
+
+ if ((termios->c_cflag & CSIZE) == CS8 ||
+ (termios->c_cflag & CSIZE) == CS7)
+ ctrl = old_ctrl & ~UARTCTRL_M;
+
+ if (termios->c_cflag & CMSPAR) {
+ if ((termios->c_cflag & CSIZE) != CS8) {
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
+ }
+ ctrl |= UARTCTRL_M;
+ }
+
+ if (termios->c_cflag & CRTSCTS) {
+ modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+ } else {
+ termios->c_cflag &= ~CRTSCTS;
+ modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ termios->c_cflag &= ~CSTOPB;
+
+ /* parity must be enabled when CS7 to match 8-bits format */
+ if ((termios->c_cflag & CSIZE) == CS7)
+ termios->c_cflag |= PARENB;
+
+ if ((termios->c_cflag & PARENB)) {
+ if (termios->c_cflag & CMSPAR) {
+ ctrl &= ~UARTCTRL_PE;
+ ctrl |= UARTCTRL_M;
+ } else {
+ ctrl |= UARTCR1_PE;
+ if ((termios->c_cflag & CSIZE) == CS8)
+ ctrl |= UARTCTRL_M;
+ if (termios->c_cflag & PARODD)
+ ctrl |= UARTCTRL_PT;
+ else
+ ctrl &= ~UARTCTRL_PT;
+ }
+ }
+
+ /* ask the core to calculate the divisor */
+ baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ sport->port.read_status_mask = 0;
+ if (termios->c_iflag & INPCK)
+ sport->port.read_status_mask |= (UARTSTAT_FE | UARTSTAT_PE);
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+ sport->port.read_status_mask |= UARTSTAT_FE;
+
+ /* characters to ignore */
+ sport->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |= UARTSTAT_PE;
+ if (termios->c_iflag & IGNBRK) {
+ sport->port.ignore_status_mask |= UARTSTAT_FE;
+ /*
+ * if we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |= UARTSTAT_OR;
+ }
+
+ /* update the per-port timeout */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /* wait transmit engin complete */
+ while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC))
+ barrier();
+
+ /* disable transmit and receive */
+ lpuart32_write(old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
+ sport->port.membase + UARTCTRL);
+
+ sbr = sport->port.uartclk / (16 * baud);
+ bd &= ~UARTBAUD_SBR_MASK;
+ bd |= sbr & UARTBAUD_SBR_MASK;
+ bd |= UARTBAUD_BOTHEDGE;
+ bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
+ lpuart32_write(bd, sport->port.membase + UARTBAUD);
+ lpuart32_write(modem, sport->port.membase + UARTMODIR);
+ lpuart32_write(ctrl, sport->port.membase + UARTCTRL);
+ /* restore control register */
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static const char *lpuart_type(struct uart_port *port)
+{
+ return "FSL_LPUART";
+}
+
+static void lpuart_release_port(struct uart_port *port)
+{
+ /* nothing to do */
+}
+
+static int lpuart_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/* configure/autoconfigure the port */
+static void lpuart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_LPUART;
+}
+
+static int lpuart_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_LPUART)
+ ret = -EINVAL;
+ if (port->irq != ser->irq)
+ ret = -EINVAL;
+ if (ser->io_type != UPIO_MEM)
+ ret = -EINVAL;
+ if (port->uartclk / 16 != ser->baud_base)
+ ret = -EINVAL;
+ if (port->iobase != ser->port)
+ ret = -EINVAL;
+ if (ser->hub6 != 0)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops lpuart_pops = {
+ .tx_empty = lpuart_tx_empty,
+ .set_mctrl = lpuart_set_mctrl,
+ .get_mctrl = lpuart_get_mctrl,
+ .stop_tx = lpuart_stop_tx,
+ .start_tx = lpuart_start_tx,
+ .stop_rx = lpuart_stop_rx,
+ .break_ctl = lpuart_break_ctl,
+ .startup = lpuart_startup,
+ .shutdown = lpuart_shutdown,
+ .set_termios = lpuart_set_termios,
+ .type = lpuart_type,
+ .request_port = lpuart_request_port,
+ .release_port = lpuart_release_port,
+ .config_port = lpuart_config_port,
+ .verify_port = lpuart_verify_port,
+ .flush_buffer = lpuart_flush_buffer,
+};
+
+static struct uart_ops lpuart32_pops = {
+ .tx_empty = lpuart32_tx_empty,
+ .set_mctrl = lpuart32_set_mctrl,
+ .get_mctrl = lpuart32_get_mctrl,
+ .stop_tx = lpuart32_stop_tx,
+ .start_tx = lpuart32_start_tx,
+ .stop_rx = lpuart32_stop_rx,
+ .break_ctl = lpuart32_break_ctl,
+ .startup = lpuart32_startup,
+ .shutdown = lpuart32_shutdown,
+ .set_termios = lpuart32_set_termios,
+ .type = lpuart_type,
+ .request_port = lpuart_request_port,
+ .release_port = lpuart_release_port,
+ .config_port = lpuart_config_port,
+ .verify_port = lpuart_verify_port,
+ .flush_buffer = lpuart_flush_buffer,
+};
+
+static struct lpuart_port *lpuart_ports[UART_NR];
+
+#ifdef CONFIG_SERIAL_FSL_LPUART_CONSOLE
+static void lpuart_console_putchar(struct uart_port *port, int ch)
+{
+ while (!(readb(port->membase + UARTSR1) & UARTSR1_TDRE))
+ barrier();
+
+ writeb(ch, port->membase + UARTDR);
+}
+
+static void lpuart32_console_putchar(struct uart_port *port, int ch)
+{
+ while (!(lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE))
+ barrier();
+
+ lpuart32_write(ch, port->membase + UARTDATA);
+}
+
+static void
+lpuart_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct lpuart_port *sport = lpuart_ports[co->index];
+ unsigned char old_cr2, cr2;
+
+ /* first save CR2 and then disable interrupts */
+ cr2 = old_cr2 = readb(sport->port.membase + UARTCR2);
+ cr2 |= (UARTCR2_TE | UARTCR2_RE);
+ cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE);
+ writeb(cr2, sport->port.membase + UARTCR2);
+
+ uart_console_write(&sport->port, s, count, lpuart_console_putchar);
+
+ /* wait for transmitter finish complete and restore CR2 */
+ while (!(readb(sport->port.membase + UARTSR1) & UARTSR1_TC))
+ barrier();
+
+ writeb(old_cr2, sport->port.membase + UARTCR2);
+}
+
+static void
+lpuart32_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct lpuart_port *sport = lpuart_ports[co->index];
+ unsigned long old_cr, cr;
+
+ /* first save CR2 and then disable interrupts */
+ cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL);
+ cr |= (UARTCTRL_TE | UARTCTRL_RE);
+ cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
+ lpuart32_write(cr, sport->port.membase + UARTCTRL);
+
+ uart_console_write(&sport->port, s, count, lpuart32_console_putchar);
+
+ /* wait for transmitter finish complete and restore CR2 */
+ while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC))
+ barrier();
+
+ lpuart32_write(old_cr, sport->port.membase + UARTCTRL);
+}
+
+/*
+ * if the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
+ */
+static void __init
+lpuart_console_get_options(struct lpuart_port *sport, int *baud,
+ int *parity, int *bits)
+{
+ unsigned char cr, bdh, bdl, brfa;
+ unsigned int sbr, uartclk, baud_raw;
+
+ cr = readb(sport->port.membase + UARTCR2);
+ cr &= UARTCR2_TE | UARTCR2_RE;
+ if (!cr)
+ return;
+
+ /* ok, the port was enabled */
+
+ cr = readb(sport->port.membase + UARTCR1);
+
+ *parity = 'n';
+ if (cr & UARTCR1_PE) {
+ if (cr & UARTCR1_PT)
+ *parity = 'o';
+ else
+ *parity = 'e';
+ }
+
+ if (cr & UARTCR1_M)
+ *bits = 9;
+ else
+ *bits = 8;
+
+ bdh = readb(sport->port.membase + UARTBDH);
+ bdh &= UARTBDH_SBR_MASK;
+ bdl = readb(sport->port.membase + UARTBDL);
+ sbr = bdh;
+ sbr <<= 8;
+ sbr |= bdl;
+ brfa = readb(sport->port.membase + UARTCR4);
+ brfa &= UARTCR4_BRFA_MASK;
+
+ uartclk = clk_get_rate(sport->clk);
+ /*
+ * baud = mod_clk/(16*(sbr[13]+(brfa)/32)
+ */
+ baud_raw = uartclk / (16 * (sbr + brfa / 32));
+
+ if (*baud != baud_raw)
+ printk(KERN_INFO "Serial: Console lpuart rounded baud rate"
+ "from %d to %d\n", baud_raw, *baud);
+}
+
+static void __init
+lpuart32_console_get_options(struct lpuart_port *sport, int *baud,
+ int *parity, int *bits)
+{
+ unsigned long cr, bd;
+ unsigned int sbr, uartclk, baud_raw;
+
+ cr = lpuart32_read(sport->port.membase + UARTCTRL);
+ cr &= UARTCTRL_TE | UARTCTRL_RE;
+ if (!cr)
+ return;
+
+ /* ok, the port was enabled */
+
+ cr = lpuart32_read(sport->port.membase + UARTCTRL);
+
+ *parity = 'n';
+ if (cr & UARTCTRL_PE) {
+ if (cr & UARTCTRL_PT)
+ *parity = 'o';
+ else
+ *parity = 'e';
+ }
+
+ if (cr & UARTCTRL_M)
+ *bits = 9;
+ else
+ *bits = 8;
+
+ bd = lpuart32_read(sport->port.membase + UARTBAUD);
+ bd &= UARTBAUD_SBR_MASK;
+ sbr = bd;
+ uartclk = clk_get_rate(sport->clk);
+ /*
+ * baud = mod_clk/(16*(sbr[13]+(brfa)/32)
+ */
+ baud_raw = uartclk / (16 * sbr);
+
+ if (*baud != baud_raw)
+ printk(KERN_INFO "Serial: Console lpuart rounded baud rate"
+ "from %d to %d\n", baud_raw, *baud);
+}
+
+static int __init lpuart_console_setup(struct console *co, char *options)
+{
+ struct lpuart_port *sport;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index == -1 || co->index >= ARRAY_SIZE(lpuart_ports))
+ co->index = 0;
+
+ sport = lpuart_ports[co->index];
+ if (sport == NULL)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ if (sport->lpuart32)
+ lpuart32_console_get_options(sport, &baud, &parity, &bits);
+ else
+ lpuart_console_get_options(sport, &baud, &parity, &bits);
+
+ if (sport->lpuart32)
+ lpuart32_setup_watermark(sport);
+ else
+ lpuart_setup_watermark(sport);
+
+ return uart_set_options(&sport->port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver lpuart_reg;
+static struct console lpuart_console = {
+ .name = DEV_NAME,
+ .write = lpuart_console_write,
+ .device = uart_console_device,
+ .setup = lpuart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &lpuart_reg,
+};
+
+static struct console lpuart32_console = {
+ .name = DEV_NAME,
+ .write = lpuart32_console_write,
+ .device = uart_console_device,
+ .setup = lpuart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &lpuart_reg,
+};
+
+#define LPUART_CONSOLE (&lpuart_console)
+#define LPUART32_CONSOLE (&lpuart32_console)
+#else
+#define LPUART_CONSOLE NULL
+#define LPUART32_CONSOLE NULL
+#endif
+
+static struct uart_driver lpuart_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = DRIVER_NAME,
+ .dev_name = DEV_NAME,
+ .nr = ARRAY_SIZE(lpuart_ports),
+ .cons = LPUART_CONSOLE,
+};
+
+static int lpuart_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct lpuart_port *sport;
+ struct resource *res;
+ int ret;
+
+ sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
+ if (!sport)
+ return -ENOMEM;
+
+ pdev->dev.coherent_dma_mask = 0;
+
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+ return ret;
+ }
+ sport->port.line = ret;
+ sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart");
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sport->port.membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(sport->port.membase))
+ return PTR_ERR(sport->port.membase);
+
+ sport->port.mapbase = res->start;
+ sport->port.dev = &pdev->dev;
+ sport->port.type = PORT_LPUART;
+ sport->port.iotype = UPIO_MEM;
+ sport->port.irq = platform_get_irq(pdev, 0);
+ if (sport->lpuart32)
+ sport->port.ops = &lpuart32_pops;
+ else
+ sport->port.ops = &lpuart_pops;
+ sport->port.flags = UPF_BOOT_AUTOCONF;
+
+ sport->clk = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(sport->clk)) {
+ ret = PTR_ERR(sport->clk);
+ dev_err(&pdev->dev, "failed to get uart clk: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(sport->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable uart clk: %d\n", ret);
+ return ret;
+ }
+
+ sport->port.uartclk = clk_get_rate(sport->clk);
+
+ lpuart_ports[sport->port.line] = sport;
+
+ platform_set_drvdata(pdev, &sport->port);
+
+ if (sport->lpuart32)
+ lpuart_reg.cons = LPUART32_CONSOLE;
+ else
+ lpuart_reg.cons = LPUART_CONSOLE;
+
+ ret = uart_add_one_port(&lpuart_reg, &sport->port);
+ if (ret) {
+ clk_disable_unprepare(sport->clk);
+ return ret;
+ }
+
+ sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
+ if (!sport->dma_tx_chan)
+ dev_info(sport->port.dev, "DMA tx channel request failed, "
+ "operating without tx DMA\n");
+
+ sport->dma_rx_chan = dma_request_slave_channel(sport->port.dev, "rx");
+ if (!sport->dma_rx_chan)
+ dev_info(sport->port.dev, "DMA rx channel request failed, "
+ "operating without rx DMA\n");
+
+ return 0;
+}
+
+static int lpuart_remove(struct platform_device *pdev)
+{
+ struct lpuart_port *sport = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&lpuart_reg, &sport->port);
+
+ clk_disable_unprepare(sport->clk);
+
+ if (sport->dma_tx_chan)
+ dma_release_channel(sport->dma_tx_chan);
+
+ if (sport->dma_rx_chan)
+ dma_release_channel(sport->dma_rx_chan);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int lpuart_suspend(struct device *dev)
+{
+ struct lpuart_port *sport = dev_get_drvdata(dev);
+ unsigned long temp;
+
+ if (sport->lpuart32) {
+ /* disable Rx/Tx and interrupts */
+ temp = lpuart32_read(sport->port.membase + UARTCTRL);
+ temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE);
+ lpuart32_write(temp, sport->port.membase + UARTCTRL);
+ } else {
+ /* disable Rx/Tx and interrupts */
+ temp = readb(sport->port.membase + UARTCR2);
+ temp &= ~(UARTCR2_TE | UARTCR2_TIE | UARTCR2_TCIE);
+ writeb(temp, sport->port.membase + UARTCR2);
+ }
+
+ uart_suspend_port(&lpuart_reg, &sport->port);
+
+ return 0;
+}
+
+static int lpuart_resume(struct device *dev)
+{
+ struct lpuart_port *sport = dev_get_drvdata(dev);
+ unsigned long temp;
+
+ if (sport->lpuart32) {
+ lpuart32_setup_watermark(sport);
+ temp = lpuart32_read(sport->port.membase + UARTCTRL);
+ temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE |
+ UARTCTRL_TE | UARTCTRL_ILIE);
+ lpuart32_write(temp, sport->port.membase + UARTCTRL);
+ } else {
+ lpuart_setup_watermark(sport);
+ temp = readb(sport->port.membase + UARTCR2);
+ temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE);
+ writeb(temp, sport->port.membase + UARTCR2);
+ }
+
+ uart_resume_port(&lpuart_reg, &sport->port);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(lpuart_pm_ops, lpuart_suspend, lpuart_resume);
+
+static struct platform_driver lpuart_driver = {
+ .probe = lpuart_probe,
+ .remove = lpuart_remove,
+ .driver = {
+ .name = "fsl-lpuart",
+ .of_match_table = lpuart_dt_ids,
+ .pm = &lpuart_pm_ops,
+ },
+};
+
+static int __init lpuart_serial_init(void)
+{
+ int ret = uart_register_driver(&lpuart_reg);
+
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&lpuart_driver);
+ if (ret)
+ uart_unregister_driver(&lpuart_reg);
+
+ return ret;
+}
+
+static void __exit lpuart_serial_exit(void)
+{
+ platform_driver_unregister(&lpuart_driver);
+ uart_unregister_driver(&lpuart_reg);
+}
+
+module_init(lpuart_serial_init);
+module_exit(lpuart_serial_exit);
+
+MODULE_DESCRIPTION("Freescale lpuart serial port driver");
+MODULE_LICENSE("GPL v2");